diff options
Diffstat (limited to 'drivers/reset')
| -rw-r--r-- | drivers/reset/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/reset/Makefile | 1 | ||||
| -rw-r--r-- | drivers/reset/core.c | 224 | ||||
| -rw-r--r-- | drivers/reset/reset-gpio.c | 119 | ||||
| -rw-r--r-- | drivers/reset/reset-simple.c | 2 |
5 files changed, 344 insertions, 14 deletions
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index ccd59ddd76..85b27c42cf 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -66,6 +66,15 @@ config RESET_BRCMSTB_RESCAL This enables the RESCAL reset controller for SATA, PCIe0, or PCIe1 on BCM7216. +config RESET_GPIO + tristate "GPIO reset controller" + help + This enables a generic reset controller for resets attached via + GPIOs. Typically for OF platforms this driver expects "reset-gpios" + property. + + If compiled as module, it will be called reset-gpio. + config RESET_HSDK bool "Synopsys HSDK Reset Driver" depends on HAS_IOMEM @@ -213,7 +222,7 @@ config RESET_SCMI config RESET_SIMPLE bool "Simple Reset Controller Driver" if COMPILE_TEST || EXPERT - default ARCH_ASPEED || ARCH_BCMBCA || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC + default ARCH_ASPEED || ARCH_BCMBCA || ARCH_BITMAIN || ARCH_REALTEK || ARCH_SOPHGO || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC depends on HAS_IOMEM help This enables a simple reset controller driver for reset lines that @@ -228,6 +237,7 @@ config RESET_SIMPLE - RCC reset controller in STM32 MCUs - Allwinner SoCs - SiFive FU740 SoCs + - Sophgo SoCs config RESET_SOCFPGA bool "SoCFPGA Reset Driver" if COMPILE_TEST && (!ARM || !ARCH_INTEL_SOCFPGA) diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index 8270da8a4b..fd8b49fa46 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_RESET_BCM6345) += reset-bcm6345.o obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o obj-$(CONFIG_RESET_BRCMSTB) += reset-brcmstb.o obj-$(CONFIG_RESET_BRCMSTB_RESCAL) += reset-brcmstb-rescal.o +obj-$(CONFIG_RESET_GPIO) += reset-gpio.o obj-$(CONFIG_RESET_HSDK) += reset-hsdk.o obj-$(CONFIG_RESET_IMX7) += reset-imx7.o obj-$(CONFIG_RESET_INTEL_GW) += reset-intel-gw.o diff --git a/drivers/reset/core.c b/drivers/reset/core.c index 4d5a78d3c0..dba74e857b 100644 --- a/drivers/reset/core.c +++ b/drivers/reset/core.c @@ -5,14 +5,19 @@ * Copyright 2013 Philipp Zabel, Pengutronix */ #include <linux/atomic.h> +#include <linux/cleanup.h> #include <linux/device.h> #include <linux/err.h> #include <linux/export.h> #include <linux/kernel.h> #include <linux/kref.h> +#include <linux/gpio/driver.h> +#include <linux/gpio/machine.h> +#include <linux/idr.h> #include <linux/module.h> #include <linux/of.h> #include <linux/acpi.h> +#include <linux/platform_device.h> #include <linux/reset.h> #include <linux/reset-controller.h> #include <linux/slab.h> @@ -23,6 +28,11 @@ static LIST_HEAD(reset_controller_list); static DEFINE_MUTEX(reset_lookup_mutex); static LIST_HEAD(reset_lookup_list); +/* Protects reset_gpio_lookup_list */ +static DEFINE_MUTEX(reset_gpio_lookup_mutex); +static LIST_HEAD(reset_gpio_lookup_list); +static DEFINE_IDA(reset_gpio_ida); + /** * struct reset_control - a reset control * @rcdev: a pointer to the reset controller device @@ -63,6 +73,16 @@ struct reset_control_array { struct reset_control *rstc[] __counted_by(num_rstcs); }; +/** + * struct reset_gpio_lookup - lookup key for ad-hoc created reset-gpio devices + * @of_args: phandle to the reset controller with all the args like GPIO number + * @list: list entry for the reset_gpio_lookup_list + */ +struct reset_gpio_lookup { + struct of_phandle_args of_args; + struct list_head list; +}; + static const char *rcdev_name(struct reset_controller_dev *rcdev) { if (rcdev->dev) @@ -71,6 +91,9 @@ static const char *rcdev_name(struct reset_controller_dev *rcdev) if (rcdev->of_node) return rcdev->of_node->full_name; + if (rcdev->of_args) + return rcdev->of_args->np->full_name; + return NULL; } @@ -99,6 +122,9 @@ static int of_reset_simple_xlate(struct reset_controller_dev *rcdev, */ int reset_controller_register(struct reset_controller_dev *rcdev) { + if (rcdev->of_node && rcdev->of_args) + return -EINVAL; + if (!rcdev->of_xlate) { rcdev->of_reset_n_cells = 1; rcdev->of_xlate = of_reset_simple_xlate; @@ -813,12 +839,171 @@ static void __reset_control_put_internal(struct reset_control *rstc) kref_put(&rstc->refcnt, __reset_control_release); } +static int __reset_add_reset_gpio_lookup(int id, struct device_node *np, + unsigned int gpio, + unsigned int of_flags) +{ + const struct fwnode_handle *fwnode = of_fwnode_handle(np); + unsigned int lookup_flags; + const char *label_tmp; + + /* + * Later we map GPIO flags between OF and Linux, however not all + * constants from include/dt-bindings/gpio/gpio.h and + * include/linux/gpio/machine.h match each other. + */ + if (of_flags > GPIO_ACTIVE_LOW) { + pr_err("reset-gpio code does not support GPIO flags %u for GPIO %u\n", + of_flags, gpio); + return -EINVAL; + } + + struct gpio_device *gdev __free(gpio_device_put) = gpio_device_find_by_fwnode(fwnode); + if (!gdev) + return -EPROBE_DEFER; + + label_tmp = gpio_device_get_label(gdev); + if (!label_tmp) + return -EINVAL; + + char *label __free(kfree) = kstrdup(label_tmp, GFP_KERNEL); + if (!label) + return -ENOMEM; + + /* Size: one lookup entry plus sentinel */ + struct gpiod_lookup_table *lookup __free(kfree) = kzalloc(struct_size(lookup, table, 2), + GFP_KERNEL); + if (!lookup) + return -ENOMEM; + + lookup->dev_id = kasprintf(GFP_KERNEL, "reset-gpio.%d", id); + if (!lookup->dev_id) + return -ENOMEM; + + lookup_flags = GPIO_PERSISTENT; + lookup_flags |= of_flags & GPIO_ACTIVE_LOW; + lookup->table[0] = GPIO_LOOKUP(no_free_ptr(label), gpio, "reset", + lookup_flags); + + /* Not freed on success, because it is persisent subsystem data. */ + gpiod_add_lookup_table(no_free_ptr(lookup)); + + return 0; +} + +/* + * @args: phandle to the GPIO provider with all the args like GPIO number + */ +static int __reset_add_reset_gpio_device(const struct of_phandle_args *args) +{ + struct reset_gpio_lookup *rgpio_dev; + struct platform_device *pdev; + int id, ret; + + /* + * Currently only #gpio-cells=2 is supported with the meaning of: + * args[0]: GPIO number + * args[1]: GPIO flags + * TODO: Handle other cases. + */ + if (args->args_count != 2) + return -ENOENT; + + /* + * Registering reset-gpio device might cause immediate + * bind, resulting in its probe() registering new reset controller thus + * taking reset_list_mutex lock via reset_controller_register(). + */ + lockdep_assert_not_held(&reset_list_mutex); + + mutex_lock(&reset_gpio_lookup_mutex); + + list_for_each_entry(rgpio_dev, &reset_gpio_lookup_list, list) { + if (args->np == rgpio_dev->of_args.np) { + if (of_phandle_args_equal(args, &rgpio_dev->of_args)) + goto out; /* Already on the list, done */ + } + } + + id = ida_alloc(&reset_gpio_ida, GFP_KERNEL); + if (id < 0) { + ret = id; + goto err_unlock; + } + + /* Not freed on success, because it is persisent subsystem data. */ + rgpio_dev = kzalloc(sizeof(*rgpio_dev), GFP_KERNEL); + if (!rgpio_dev) { + ret = -ENOMEM; + goto err_ida_free; + } + + ret = __reset_add_reset_gpio_lookup(id, args->np, args->args[0], + args->args[1]); + if (ret < 0) + goto err_kfree; + + rgpio_dev->of_args = *args; + /* + * We keep the device_node reference, but of_args.np is put at the end + * of __of_reset_control_get(), so get it one more time. + * Hold reference as long as rgpio_dev memory is valid. + */ + of_node_get(rgpio_dev->of_args.np); + pdev = platform_device_register_data(NULL, "reset-gpio", id, + &rgpio_dev->of_args, + sizeof(rgpio_dev->of_args)); + ret = PTR_ERR_OR_ZERO(pdev); + if (ret) + goto err_put; + + list_add(&rgpio_dev->list, &reset_gpio_lookup_list); + +out: + mutex_unlock(&reset_gpio_lookup_mutex); + + return 0; + +err_put: + of_node_put(rgpio_dev->of_args.np); +err_kfree: + kfree(rgpio_dev); +err_ida_free: + ida_free(&reset_gpio_ida, id); +err_unlock: + mutex_unlock(&reset_gpio_lookup_mutex); + + return ret; +} + +static struct reset_controller_dev *__reset_find_rcdev(const struct of_phandle_args *args, + bool gpio_fallback) +{ + struct reset_controller_dev *rcdev; + + lockdep_assert_held(&reset_list_mutex); + + list_for_each_entry(rcdev, &reset_controller_list, list) { + if (gpio_fallback) { + if (rcdev->of_args && of_phandle_args_equal(args, + rcdev->of_args)) + return rcdev; + } else { + if (args->np == rcdev->of_node) + return rcdev; + } + } + + return NULL; +} + struct reset_control * __of_reset_control_get(struct device_node *node, const char *id, int index, bool shared, bool optional, bool acquired) { + bool gpio_fallback = false; struct reset_control *rstc; - struct reset_controller_dev *r, *rcdev; + struct reset_controller_dev *rcdev; struct of_phandle_args args; int rstc_id; int ret; @@ -839,39 +1024,52 @@ __of_reset_control_get(struct device_node *node, const char *id, int index, index, &args); if (ret == -EINVAL) return ERR_PTR(ret); - if (ret) - return optional ? NULL : ERR_PTR(ret); + if (ret) { + if (!IS_ENABLED(CONFIG_RESET_GPIO)) + return optional ? NULL : ERR_PTR(ret); - mutex_lock(&reset_list_mutex); - rcdev = NULL; - list_for_each_entry(r, &reset_controller_list, list) { - if (args.np == r->of_node) { - rcdev = r; - break; + /* + * There can be only one reset-gpio for regular devices, so + * don't bother with the "reset-gpios" phandle index. + */ + ret = of_parse_phandle_with_args(node, "reset-gpios", "#gpio-cells", + 0, &args); + if (ret) + return optional ? NULL : ERR_PTR(ret); + + gpio_fallback = true; + + ret = __reset_add_reset_gpio_device(&args); + if (ret) { + rstc = ERR_PTR(ret); + goto out_put; } } + mutex_lock(&reset_list_mutex); + rcdev = __reset_find_rcdev(&args, gpio_fallback); if (!rcdev) { rstc = ERR_PTR(-EPROBE_DEFER); - goto out; + goto out_unlock; } if (WARN_ON(args.args_count != rcdev->of_reset_n_cells)) { rstc = ERR_PTR(-EINVAL); - goto out; + goto out_unlock; } rstc_id = rcdev->of_xlate(rcdev, &args); if (rstc_id < 0) { rstc = ERR_PTR(rstc_id); - goto out; + goto out_unlock; } /* reset_list_mutex also protects the rcdev's reset_control list */ rstc = __reset_control_get_internal(rcdev, rstc_id, shared, acquired); -out: +out_unlock: mutex_unlock(&reset_list_mutex); +out_put: of_node_put(args.np); return rstc; diff --git a/drivers/reset/reset-gpio.c b/drivers/reset/reset-gpio.c new file mode 100644 index 0000000000..2290b25b67 --- /dev/null +++ b/drivers/reset/reset-gpio.c @@ -0,0 +1,119 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/gpio/consumer.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/reset-controller.h> + +struct reset_gpio_priv { + struct reset_controller_dev rc; + struct gpio_desc *reset; +}; + +static inline struct reset_gpio_priv +*rc_to_reset_gpio(struct reset_controller_dev *rc) +{ + return container_of(rc, struct reset_gpio_priv, rc); +} + +static int reset_gpio_assert(struct reset_controller_dev *rc, unsigned long id) +{ + struct reset_gpio_priv *priv = rc_to_reset_gpio(rc); + + gpiod_set_value_cansleep(priv->reset, 1); + + return 0; +} + +static int reset_gpio_deassert(struct reset_controller_dev *rc, + unsigned long id) +{ + struct reset_gpio_priv *priv = rc_to_reset_gpio(rc); + + gpiod_set_value_cansleep(priv->reset, 0); + + return 0; +} + +static int reset_gpio_status(struct reset_controller_dev *rc, unsigned long id) +{ + struct reset_gpio_priv *priv = rc_to_reset_gpio(rc); + + return gpiod_get_value_cansleep(priv->reset); +} + +static const struct reset_control_ops reset_gpio_ops = { + .assert = reset_gpio_assert, + .deassert = reset_gpio_deassert, + .status = reset_gpio_status, +}; + +static int reset_gpio_of_xlate(struct reset_controller_dev *rcdev, + const struct of_phandle_args *reset_spec) +{ + return reset_spec->args[0]; +} + +static void reset_gpio_of_node_put(void *data) +{ + of_node_put(data); +} + +static int reset_gpio_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct of_phandle_args *platdata = dev_get_platdata(dev); + struct reset_gpio_priv *priv; + int ret; + + if (!platdata) + return -EINVAL; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + platform_set_drvdata(pdev, &priv->rc); + + priv->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(priv->reset)) + return dev_err_probe(dev, PTR_ERR(priv->reset), + "Could not get reset gpios\n"); + + priv->rc.ops = &reset_gpio_ops; + priv->rc.owner = THIS_MODULE; + priv->rc.dev = dev; + priv->rc.of_args = platdata; + ret = devm_add_action_or_reset(dev, reset_gpio_of_node_put, + priv->rc.of_node); + if (ret) + return ret; + + /* Cells to match GPIO specifier, but it's not really used */ + priv->rc.of_reset_n_cells = 2; + priv->rc.of_xlate = reset_gpio_of_xlate; + priv->rc.nr_resets = 1; + + return devm_reset_controller_register(dev, &priv->rc); +} + +static const struct platform_device_id reset_gpio_ids[] = { + { .name = "reset-gpio", }, + {} +}; +MODULE_DEVICE_TABLE(platform, reset_gpio_ids); + +static struct platform_driver reset_gpio_driver = { + .probe = reset_gpio_probe, + .id_table = reset_gpio_ids, + .driver = { + .name = "reset-gpio", + }, +}; +module_platform_driver(reset_gpio_driver); + +MODULE_AUTHOR("Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>"); +MODULE_DESCRIPTION("Generic GPIO reset driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/reset/reset-simple.c b/drivers/reset/reset-simple.c index 818cabcc9f..2760678398 100644 --- a/drivers/reset/reset-simple.c +++ b/drivers/reset/reset-simple.c @@ -151,6 +151,8 @@ static const struct of_device_id reset_simple_dt_ids[] = { { .compatible = "snps,dw-high-reset" }, { .compatible = "snps,dw-low-reset", .data = &reset_simple_active_low }, + { .compatible = "sophgo,sg2042-reset", + .data = &reset_simple_active_low }, { /* sentinel */ }, }; |