diff options
Diffstat (limited to 'drivers/scsi/bnx2i/bnx2i_init.c')
| -rw-r--r-- | drivers/scsi/bnx2i/bnx2i_init.c | 550 |
1 files changed, 550 insertions, 0 deletions
diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c new file mode 100644 index 0000000000..872ad37e2a --- /dev/null +++ b/drivers/scsi/bnx2i/bnx2i_init.c @@ -0,0 +1,550 @@ +/* bnx2i.c: QLogic NetXtreme II iSCSI driver. + * + * Copyright (c) 2006 - 2013 Broadcom Corporation + * Copyright (c) 2007, 2008 Red Hat, Inc. All rights reserved. + * Copyright (c) 2007, 2008 Mike Christie + * Copyright (c) 2014, QLogic Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Written by: Anil Veerabhadrappa (anilgv@broadcom.com) + * Previously Maintained by: Eddie Wai (eddie.wai@broadcom.com) + * Maintained by: QLogic-Storage-Upstream@qlogic.com + */ + +#include "bnx2i.h" + +static struct list_head adapter_list = LIST_HEAD_INIT(adapter_list); +static u32 adapter_count; + +#define DRV_MODULE_NAME "bnx2i" +#define DRV_MODULE_VERSION "2.7.10.1" +#define DRV_MODULE_RELDATE "Jul 16, 2014" + +static char version[] = + "QLogic NetXtreme II iSCSI Driver " DRV_MODULE_NAME \ + " v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; + + +MODULE_AUTHOR("Anil Veerabhadrappa <anilgv@broadcom.com> and " + "Eddie Wai <eddie.wai@broadcom.com>"); + +MODULE_DESCRIPTION("QLogic NetXtreme II BCM5706/5708/5709/57710/57711/57712" + "/57800/57810/57840 iSCSI Driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_MODULE_VERSION); + +static DEFINE_MUTEX(bnx2i_dev_lock); + +unsigned int event_coal_min = 24; +module_param(event_coal_min, int, 0664); +MODULE_PARM_DESC(event_coal_min, "Event Coalescing Minimum Commands"); + +unsigned int event_coal_div = 2; +module_param(event_coal_div, int, 0664); +MODULE_PARM_DESC(event_coal_div, "Event Coalescing Divide Factor"); + +unsigned int en_tcp_dack = 1; +module_param(en_tcp_dack, int, 0664); +MODULE_PARM_DESC(en_tcp_dack, "Enable TCP Delayed ACK"); + +unsigned int error_mask1 = 0x00; +module_param(error_mask1, uint, 0664); +MODULE_PARM_DESC(error_mask1, "Config FW iSCSI Error Mask #1"); + +unsigned int error_mask2 = 0x00; +module_param(error_mask2, uint, 0664); +MODULE_PARM_DESC(error_mask2, "Config FW iSCSI Error Mask #2"); + +unsigned int sq_size; +module_param(sq_size, int, 0664); +MODULE_PARM_DESC(sq_size, "Configure SQ size"); + +unsigned int rq_size = BNX2I_RQ_WQES_DEFAULT; +module_param(rq_size, int, 0664); +MODULE_PARM_DESC(rq_size, "Configure RQ size"); + +u64 iscsi_error_mask = 0x00; + +DEFINE_PER_CPU(struct bnx2i_percpu_s, bnx2i_percpu); + +/** + * bnx2i_identify_device - identifies NetXtreme II device type + * @hba: Adapter structure pointer + * @dev: Corresponding cnic device + * + * This function identifies the NX2 device type and sets appropriate + * queue mailbox register access method, 5709 requires driver to + * access MBOX regs using *bin* mode + */ +void bnx2i_identify_device(struct bnx2i_hba *hba, struct cnic_dev *dev) +{ + hba->cnic_dev_type = 0; + if (test_bit(CNIC_F_BNX2_CLASS, &dev->flags)) { + if (hba->pci_did == PCI_DEVICE_ID_NX2_5706 || + hba->pci_did == PCI_DEVICE_ID_NX2_5706S) { + set_bit(BNX2I_NX2_DEV_5706, &hba->cnic_dev_type); + } else if (hba->pci_did == PCI_DEVICE_ID_NX2_5708 || + hba->pci_did == PCI_DEVICE_ID_NX2_5708S) { + set_bit(BNX2I_NX2_DEV_5708, &hba->cnic_dev_type); + } else if (hba->pci_did == PCI_DEVICE_ID_NX2_5709 || + hba->pci_did == PCI_DEVICE_ID_NX2_5709S) { + set_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type); + hba->mail_queue_access = BNX2I_MQ_BIN_MODE; + } + } else if (test_bit(CNIC_F_BNX2X_CLASS, &dev->flags)) { + set_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type); + } else { + printk(KERN_ALERT "bnx2i: unknown device, 0x%x\n", + hba->pci_did); + } +} + + +/** + * get_adapter_list_head - returns head of adapter list + */ +struct bnx2i_hba *get_adapter_list_head(void) +{ + struct bnx2i_hba *hba = NULL; + struct bnx2i_hba *tmp_hba; + + if (!adapter_count) + goto hba_not_found; + + mutex_lock(&bnx2i_dev_lock); + list_for_each_entry(tmp_hba, &adapter_list, link) { + if (tmp_hba->cnic && tmp_hba->cnic->cm_select_dev) { + hba = tmp_hba; + break; + } + } + mutex_unlock(&bnx2i_dev_lock); +hba_not_found: + return hba; +} + + +/** + * bnx2i_find_hba_for_cnic - maps cnic device instance to bnx2i adapter instance + * @cnic: pointer to cnic device instance + * + */ +struct bnx2i_hba *bnx2i_find_hba_for_cnic(struct cnic_dev *cnic) +{ + struct bnx2i_hba *hba, *temp; + + mutex_lock(&bnx2i_dev_lock); + list_for_each_entry_safe(hba, temp, &adapter_list, link) { + if (hba->cnic == cnic) { + mutex_unlock(&bnx2i_dev_lock); + return hba; + } + } + mutex_unlock(&bnx2i_dev_lock); + return NULL; +} + + +/** + * bnx2i_start - cnic callback to initialize & start adapter instance + * @handle: transparent handle pointing to adapter structure + * + * This function maps adapter structure to pcidev structure and initiates + * firmware handshake to enable/initialize on chip iscsi components + * This bnx2i - cnic interface api callback is issued after following + * 2 conditions are met - + * a) underlying network interface is up (marked by event 'NETDEV_UP' + * from netdev + * b) bnx2i adapter instance is registered + */ +void bnx2i_start(void *handle) +{ +#define BNX2I_INIT_POLL_TIME (1000 / HZ) + struct bnx2i_hba *hba = handle; + int i = HZ; + + /* On some bnx2x devices, it is possible that iSCSI is no + * longer supported after firmware is downloaded. In that + * case, the iscsi_init_msg will return failure. + */ + + bnx2i_send_fw_iscsi_init_msg(hba); + while (!test_bit(ADAPTER_STATE_UP, &hba->adapter_state) && + !test_bit(ADAPTER_STATE_INIT_FAILED, &hba->adapter_state) && i--) + msleep(BNX2I_INIT_POLL_TIME); +} + + +/** + * bnx2i_chip_cleanup - local routine to handle chip cleanup + * @hba: Adapter instance to register + * + * Driver checks if adapter still has any active connections before + * executing the cleanup process + */ +static void bnx2i_chip_cleanup(struct bnx2i_hba *hba) +{ + struct bnx2i_endpoint *bnx2i_ep; + struct list_head *pos, *tmp; + + if (hba->ofld_conns_active) { + /* Stage to force the disconnection + * This is the case where the daemon is either slow or + * not present + */ + printk(KERN_ALERT "bnx2i: (%s) chip cleanup for %d active " + "connections\n", hba->netdev->name, + hba->ofld_conns_active); + mutex_lock(&hba->net_dev_lock); + list_for_each_safe(pos, tmp, &hba->ep_active_list) { + bnx2i_ep = list_entry(pos, struct bnx2i_endpoint, link); + /* Clean up the chip only */ + bnx2i_hw_ep_disconnect(bnx2i_ep); + bnx2i_ep->cm_sk = NULL; + } + mutex_unlock(&hba->net_dev_lock); + } +} + + +/** + * bnx2i_stop - cnic callback to shutdown adapter instance + * @handle: transparent handle pointing to adapter structure + * + * driver checks if adapter is already in shutdown mode, if not start + * the shutdown process + */ +void bnx2i_stop(void *handle) +{ + struct bnx2i_hba *hba = handle; + int conns_active; + int wait_delay = 1 * HZ; + + /* check if cleanup happened in GOING_DOWN context */ + if (!test_and_set_bit(ADAPTER_STATE_GOING_DOWN, + &hba->adapter_state)) { + iscsi_host_for_each_session(hba->shost, + bnx2i_drop_session); + wait_delay = hba->hba_shutdown_tmo; + } + /* Wait for inflight offload connection tasks to complete before + * proceeding. Forcefully terminate all connection recovery in + * progress at the earliest, either in bind(), send_pdu(LOGIN), + * or conn_start() + */ + wait_event_interruptible_timeout(hba->eh_wait, + (list_empty(&hba->ep_ofld_list) && + list_empty(&hba->ep_destroy_list)), + 2 * HZ); + /* Wait for all endpoints to be torn down, Chip will be reset once + * control returns to network driver. So it is required to cleanup and + * release all connection resources before returning from this routine. + */ + while (hba->ofld_conns_active) { + conns_active = hba->ofld_conns_active; + wait_event_interruptible_timeout(hba->eh_wait, + (hba->ofld_conns_active != conns_active), + wait_delay); + if (hba->ofld_conns_active == conns_active) + break; + } + bnx2i_chip_cleanup(hba); + + /* This flag should be cleared last so that ep_disconnect() gracefully + * cleans up connection context + */ + clear_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state); + clear_bit(ADAPTER_STATE_UP, &hba->adapter_state); +} + + +/** + * bnx2i_init_one - initialize an adapter instance and allocate memory resources + * @hba: bnx2i adapter instance + * @cnic: cnic device handle + * + * Global resource lock is held during critical sections below. This routine is + * called from either cnic_register_driver() or device hot plug context and + * and does majority of device specific initialization + */ +static int bnx2i_init_one(struct bnx2i_hba *hba, struct cnic_dev *cnic) +{ + int rc; + + mutex_lock(&bnx2i_dev_lock); + if (!cnic->max_iscsi_conn) { + printk(KERN_ALERT "bnx2i: dev %s does not support " + "iSCSI\n", hba->netdev->name); + rc = -EOPNOTSUPP; + goto out; + } + + hba->cnic = cnic; + rc = cnic->register_device(cnic, CNIC_ULP_ISCSI, hba); + if (!rc) { + hba->age++; + set_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic); + list_add_tail(&hba->link, &adapter_list); + adapter_count++; + } else if (rc == -EBUSY) /* duplicate registration */ + printk(KERN_ALERT "bnx2i, duplicate registration" + "hba=%p, cnic=%p\n", hba, cnic); + else if (rc == -EAGAIN) + printk(KERN_ERR "bnx2i, driver not registered\n"); + else if (rc == -EINVAL) + printk(KERN_ERR "bnx2i, invalid type %d\n", CNIC_ULP_ISCSI); + else + printk(KERN_ERR "bnx2i dev reg, unknown error, %d\n", rc); + +out: + mutex_unlock(&bnx2i_dev_lock); + + return rc; +} + + +/** + * bnx2i_ulp_init - initialize an adapter instance + * @dev: cnic device handle + * + * Called from cnic_register_driver() context to initialize all enumerated + * cnic devices. This routine allocate adapter structure and other + * device specific resources. + */ +void bnx2i_ulp_init(struct cnic_dev *dev) +{ + struct bnx2i_hba *hba; + + /* Allocate a HBA structure for this device */ + hba = bnx2i_alloc_hba(dev); + if (!hba) { + printk(KERN_ERR "bnx2i init: hba initialization failed\n"); + return; + } + + /* Get PCI related information and update hba struct members */ + clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic); + if (bnx2i_init_one(hba, dev)) { + printk(KERN_ERR "bnx2i - hba %p init failed\n", hba); + bnx2i_free_hba(hba); + } +} + + +/** + * bnx2i_ulp_exit - shuts down adapter instance and frees all resources + * @dev: cnic device handle + * + */ +void bnx2i_ulp_exit(struct cnic_dev *dev) +{ + struct bnx2i_hba *hba; + + hba = bnx2i_find_hba_for_cnic(dev); + if (!hba) { + printk(KERN_INFO "bnx2i_ulp_exit: hba not " + "found, dev 0x%p\n", dev); + return; + } + mutex_lock(&bnx2i_dev_lock); + list_del_init(&hba->link); + adapter_count--; + + if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) { + hba->cnic->unregister_device(hba->cnic, CNIC_ULP_ISCSI); + clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic); + } + mutex_unlock(&bnx2i_dev_lock); + + bnx2i_free_hba(hba); +} + + +/** + * bnx2i_get_stats - Retrieve various statistic from iSCSI offload + * @handle: bnx2i_hba + * + * function callback exported via bnx2i - cnic driver interface to + * retrieve various iSCSI offload related statistics. + */ +int bnx2i_get_stats(void *handle) +{ + struct bnx2i_hba *hba = handle; + struct iscsi_stats_info *stats; + + if (!hba) + return -EINVAL; + + stats = (struct iscsi_stats_info *)hba->cnic->stats_addr; + + if (!stats) + return -ENOMEM; + + strscpy(stats->version, DRV_MODULE_VERSION, sizeof(stats->version)); + memcpy(stats->mac_add1 + 2, hba->cnic->mac_addr, ETH_ALEN); + + stats->max_frame_size = hba->netdev->mtu; + stats->txq_size = hba->max_sqes; + stats->rxq_size = hba->max_cqes; + + stats->txq_avg_depth = 0; + stats->rxq_avg_depth = 0; + + GET_STATS_64(hba, stats, rx_pdus); + GET_STATS_64(hba, stats, rx_bytes); + + GET_STATS_64(hba, stats, tx_pdus); + GET_STATS_64(hba, stats, tx_bytes); + + return 0; +} + + +/** + * bnx2i_cpu_online - Create a receive thread for an online CPU + * + * @cpu: cpu index for the online cpu + */ +static int bnx2i_cpu_online(unsigned int cpu) +{ + struct bnx2i_percpu_s *p; + struct task_struct *thread; + + p = &per_cpu(bnx2i_percpu, cpu); + + thread = kthread_create_on_node(bnx2i_percpu_io_thread, (void *)p, + cpu_to_node(cpu), + "bnx2i_thread/%d", cpu); + if (IS_ERR(thread)) + return PTR_ERR(thread); + + /* bind thread to the cpu */ + kthread_bind(thread, cpu); + p->iothread = thread; + wake_up_process(thread); + return 0; +} + +static int bnx2i_cpu_offline(unsigned int cpu) +{ + struct bnx2i_percpu_s *p; + struct task_struct *thread; + struct bnx2i_work *work, *tmp; + + /* Prevent any new work from being queued for this CPU */ + p = &per_cpu(bnx2i_percpu, cpu); + spin_lock_bh(&p->p_work_lock); + thread = p->iothread; + p->iothread = NULL; + + /* Free all work in the list */ + list_for_each_entry_safe(work, tmp, &p->work_list, list) { + list_del_init(&work->list); + bnx2i_process_scsi_cmd_resp(work->session, + work->bnx2i_conn, &work->cqe); + kfree(work); + } + + spin_unlock_bh(&p->p_work_lock); + if (thread) + kthread_stop(thread); + return 0; +} + +static enum cpuhp_state bnx2i_online_state; + +/** + * bnx2i_mod_init - module init entry point + * + * initialize any driver wide global data structures such as endpoint pool, + * tcp port manager/queue, sysfs. finally driver will register itself + * with the cnic module + */ +static int __init bnx2i_mod_init(void) +{ + int err; + unsigned cpu = 0; + struct bnx2i_percpu_s *p; + + printk(KERN_INFO "%s", version); + + if (sq_size && !is_power_of_2(sq_size)) + sq_size = roundup_pow_of_two(sq_size); + + bnx2i_scsi_xport_template = + iscsi_register_transport(&bnx2i_iscsi_transport); + if (!bnx2i_scsi_xport_template) { + printk(KERN_ERR "Could not register bnx2i transport.\n"); + err = -ENOMEM; + goto out; + } + + err = cnic_register_driver(CNIC_ULP_ISCSI, &bnx2i_cnic_cb); + if (err) { + printk(KERN_ERR "Could not register bnx2i cnic driver.\n"); + goto unreg_xport; + } + + /* Create percpu kernel threads to handle iSCSI I/O completions */ + for_each_possible_cpu(cpu) { + p = &per_cpu(bnx2i_percpu, cpu); + INIT_LIST_HEAD(&p->work_list); + spin_lock_init(&p->p_work_lock); + p->iothread = NULL; + } + + err = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "scsi/bnx2i:online", + bnx2i_cpu_online, bnx2i_cpu_offline); + if (err < 0) + goto unreg_driver; + bnx2i_online_state = err; + return 0; + +unreg_driver: + cnic_unregister_driver(CNIC_ULP_ISCSI); +unreg_xport: + iscsi_unregister_transport(&bnx2i_iscsi_transport); +out: + return err; +} + + +/** + * bnx2i_mod_exit - module cleanup/exit entry point + * + * Global resource lock and host adapter lock is held during critical sections + * in this function. Driver will browse through the adapter list, cleans-up + * each instance, unregisters iscsi transport name and finally driver will + * unregister itself with the cnic module + */ +static void __exit bnx2i_mod_exit(void) +{ + struct bnx2i_hba *hba; + + mutex_lock(&bnx2i_dev_lock); + while (!list_empty(&adapter_list)) { + hba = list_entry(adapter_list.next, struct bnx2i_hba, link); + list_del(&hba->link); + adapter_count--; + + if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) { + bnx2i_chip_cleanup(hba); + hba->cnic->unregister_device(hba->cnic, CNIC_ULP_ISCSI); + clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic); + } + + bnx2i_free_hba(hba); + } + mutex_unlock(&bnx2i_dev_lock); + + cpuhp_remove_state(bnx2i_online_state); + + iscsi_unregister_transport(&bnx2i_iscsi_transport); + cnic_unregister_driver(CNIC_ULP_ISCSI); +} + +module_init(bnx2i_mod_init); +module_exit(bnx2i_mod_exit); |