diff options
Diffstat (limited to 'drivers/scsi/mpi3mr/mpi3mr_fw.c')
| -rw-r--r-- | drivers/scsi/mpi3mr/mpi3mr_fw.c | 5832 |
1 files changed, 5832 insertions, 0 deletions
diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c new file mode 100644 index 0000000000..f039f1d986 --- /dev/null +++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c @@ -0,0 +1,5832 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Driver for Broadcom MPI3 Storage Controllers + * + * Copyright (C) 2017-2023 Broadcom Inc. + * (mailto: mpi3mr-linuxdrv.pdl@broadcom.com) + * + */ + +#include "mpi3mr.h" +#include <linux/io-64-nonatomic-lo-hi.h> + +static int +mpi3mr_issue_reset(struct mpi3mr_ioc *mrioc, u16 reset_type, u32 reset_reason); +static int mpi3mr_setup_admin_qpair(struct mpi3mr_ioc *mrioc); +static void mpi3mr_process_factsdata(struct mpi3mr_ioc *mrioc, + struct mpi3_ioc_facts_data *facts_data); +static void mpi3mr_pel_wait_complete(struct mpi3mr_ioc *mrioc, + struct mpi3mr_drv_cmd *drv_cmd); + +static int poll_queues; +module_param(poll_queues, int, 0444); +MODULE_PARM_DESC(poll_queues, "Number of queues for io_uring poll mode. (Range 1 - 126)"); + +#if defined(writeq) && defined(CONFIG_64BIT) +static inline void mpi3mr_writeq(__u64 b, volatile void __iomem *addr) +{ + writeq(b, addr); +} +#else +static inline void mpi3mr_writeq(__u64 b, volatile void __iomem *addr) +{ + __u64 data_out = b; + + writel((u32)(data_out), addr); + writel((u32)(data_out >> 32), (addr + 4)); +} +#endif + +static inline bool +mpi3mr_check_req_qfull(struct op_req_qinfo *op_req_q) +{ + u16 pi, ci, max_entries; + bool is_qfull = false; + + pi = op_req_q->pi; + ci = READ_ONCE(op_req_q->ci); + max_entries = op_req_q->num_requests; + + if ((ci == (pi + 1)) || ((!ci) && (pi == (max_entries - 1)))) + is_qfull = true; + + return is_qfull; +} + +static void mpi3mr_sync_irqs(struct mpi3mr_ioc *mrioc) +{ + u16 i, max_vectors; + + max_vectors = mrioc->intr_info_count; + + for (i = 0; i < max_vectors; i++) + synchronize_irq(pci_irq_vector(mrioc->pdev, i)); +} + +void mpi3mr_ioc_disable_intr(struct mpi3mr_ioc *mrioc) +{ + mrioc->intr_enabled = 0; + mpi3mr_sync_irqs(mrioc); +} + +void mpi3mr_ioc_enable_intr(struct mpi3mr_ioc *mrioc) +{ + mrioc->intr_enabled = 1; +} + +static void mpi3mr_cleanup_isr(struct mpi3mr_ioc *mrioc) +{ + u16 i; + + mpi3mr_ioc_disable_intr(mrioc); + + if (!mrioc->intr_info) + return; + + for (i = 0; i < mrioc->intr_info_count; i++) + free_irq(pci_irq_vector(mrioc->pdev, i), + (mrioc->intr_info + i)); + + kfree(mrioc->intr_info); + mrioc->intr_info = NULL; + mrioc->intr_info_count = 0; + mrioc->is_intr_info_set = false; + pci_free_irq_vectors(mrioc->pdev); +} + +void mpi3mr_add_sg_single(void *paddr, u8 flags, u32 length, + dma_addr_t dma_addr) +{ + struct mpi3_sge_common *sgel = paddr; + + sgel->flags = flags; + sgel->length = cpu_to_le32(length); + sgel->address = cpu_to_le64(dma_addr); +} + +void mpi3mr_build_zero_len_sge(void *paddr) +{ + u8 sgl_flags = MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST; + + mpi3mr_add_sg_single(paddr, sgl_flags, 0, -1); +} + +void *mpi3mr_get_reply_virt_addr(struct mpi3mr_ioc *mrioc, + dma_addr_t phys_addr) +{ + if (!phys_addr) + return NULL; + + if ((phys_addr < mrioc->reply_buf_dma) || + (phys_addr > mrioc->reply_buf_dma_max_address)) + return NULL; + + return mrioc->reply_buf + (phys_addr - mrioc->reply_buf_dma); +} + +void *mpi3mr_get_sensebuf_virt_addr(struct mpi3mr_ioc *mrioc, + dma_addr_t phys_addr) +{ + if (!phys_addr) + return NULL; + + return mrioc->sense_buf + (phys_addr - mrioc->sense_buf_dma); +} + +static void mpi3mr_repost_reply_buf(struct mpi3mr_ioc *mrioc, + u64 reply_dma) +{ + u32 old_idx = 0; + unsigned long flags; + + spin_lock_irqsave(&mrioc->reply_free_queue_lock, flags); + old_idx = mrioc->reply_free_queue_host_index; + mrioc->reply_free_queue_host_index = ( + (mrioc->reply_free_queue_host_index == + (mrioc->reply_free_qsz - 1)) ? 0 : + (mrioc->reply_free_queue_host_index + 1)); + mrioc->reply_free_q[old_idx] = cpu_to_le64(reply_dma); + writel(mrioc->reply_free_queue_host_index, + &mrioc->sysif_regs->reply_free_host_index); + spin_unlock_irqrestore(&mrioc->reply_free_queue_lock, flags); +} + +void mpi3mr_repost_sense_buf(struct mpi3mr_ioc *mrioc, + u64 sense_buf_dma) +{ + u32 old_idx = 0; + unsigned long flags; + + spin_lock_irqsave(&mrioc->sbq_lock, flags); + old_idx = mrioc->sbq_host_index; + mrioc->sbq_host_index = ((mrioc->sbq_host_index == + (mrioc->sense_buf_q_sz - 1)) ? 0 : + (mrioc->sbq_host_index + 1)); + mrioc->sense_buf_q[old_idx] = cpu_to_le64(sense_buf_dma); + writel(mrioc->sbq_host_index, + &mrioc->sysif_regs->sense_buffer_free_host_index); + spin_unlock_irqrestore(&mrioc->sbq_lock, flags); +} + +static void mpi3mr_print_event_data(struct mpi3mr_ioc *mrioc, + struct mpi3_event_notification_reply *event_reply) +{ + char *desc = NULL; + u16 event; + + event = event_reply->event; + + switch (event) { + case MPI3_EVENT_LOG_DATA: + desc = "Log Data"; + break; + case MPI3_EVENT_CHANGE: + desc = "Event Change"; + break; + case MPI3_EVENT_GPIO_INTERRUPT: + desc = "GPIO Interrupt"; + break; + case MPI3_EVENT_CABLE_MGMT: + desc = "Cable Management"; + break; + case MPI3_EVENT_ENERGY_PACK_CHANGE: + desc = "Energy Pack Change"; + break; + case MPI3_EVENT_DEVICE_ADDED: + { + struct mpi3_device_page0 *event_data = + (struct mpi3_device_page0 *)event_reply->event_data; + ioc_info(mrioc, "Device Added: dev=0x%04x Form=0x%x\n", + event_data->dev_handle, event_data->device_form); + return; + } + case MPI3_EVENT_DEVICE_INFO_CHANGED: + { + struct mpi3_device_page0 *event_data = + (struct mpi3_device_page0 *)event_reply->event_data; + ioc_info(mrioc, "Device Info Changed: dev=0x%04x Form=0x%x\n", + event_data->dev_handle, event_data->device_form); + return; + } + case MPI3_EVENT_DEVICE_STATUS_CHANGE: + { + struct mpi3_event_data_device_status_change *event_data = + (struct mpi3_event_data_device_status_change *)event_reply->event_data; + ioc_info(mrioc, "Device status Change: dev=0x%04x RC=0x%x\n", + event_data->dev_handle, event_data->reason_code); + return; + } + case MPI3_EVENT_SAS_DISCOVERY: + { + struct mpi3_event_data_sas_discovery *event_data = + (struct mpi3_event_data_sas_discovery *)event_reply->event_data; + ioc_info(mrioc, "SAS Discovery: (%s) status (0x%08x)\n", + (event_data->reason_code == MPI3_EVENT_SAS_DISC_RC_STARTED) ? + "start" : "stop", + le32_to_cpu(event_data->discovery_status)); + return; + } + case MPI3_EVENT_SAS_BROADCAST_PRIMITIVE: + desc = "SAS Broadcast Primitive"; + break; + case MPI3_EVENT_SAS_NOTIFY_PRIMITIVE: + desc = "SAS Notify Primitive"; + break; + case MPI3_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE: + desc = "SAS Init Device Status Change"; + break; + case MPI3_EVENT_SAS_INIT_TABLE_OVERFLOW: + desc = "SAS Init Table Overflow"; + break; + case MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST: + desc = "SAS Topology Change List"; + break; + case MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE: + desc = "Enclosure Device Status Change"; + break; + case MPI3_EVENT_ENCL_DEVICE_ADDED: + desc = "Enclosure Added"; + break; + case MPI3_EVENT_HARD_RESET_RECEIVED: + desc = "Hard Reset Received"; + break; + case MPI3_EVENT_SAS_PHY_COUNTER: + desc = "SAS PHY Counter"; + break; + case MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR: + desc = "SAS Device Discovery Error"; + break; + case MPI3_EVENT_PCIE_TOPOLOGY_CHANGE_LIST: + desc = "PCIE Topology Change List"; + break; + case MPI3_EVENT_PCIE_ENUMERATION: + { + struct mpi3_event_data_pcie_enumeration *event_data = + (struct mpi3_event_data_pcie_enumeration *)event_reply->event_data; + ioc_info(mrioc, "PCIE Enumeration: (%s)", + (event_data->reason_code == + MPI3_EVENT_PCIE_ENUM_RC_STARTED) ? "start" : "stop"); + if (event_data->enumeration_status) + ioc_info(mrioc, "enumeration_status(0x%08x)\n", + le32_to_cpu(event_data->enumeration_status)); + return; + } + case MPI3_EVENT_PREPARE_FOR_RESET: + desc = "Prepare For Reset"; + break; + } + + if (!desc) + return; + + ioc_info(mrioc, "%s\n", desc); +} + +static void mpi3mr_handle_events(struct mpi3mr_ioc *mrioc, + struct mpi3_default_reply *def_reply) +{ + struct mpi3_event_notification_reply *event_reply = + (struct mpi3_event_notification_reply *)def_reply; + + mrioc->change_count = le16_to_cpu(event_reply->ioc_change_count); + mpi3mr_print_event_data(mrioc, event_reply); + mpi3mr_os_handle_events(mrioc, event_reply); +} + +static struct mpi3mr_drv_cmd * +mpi3mr_get_drv_cmd(struct mpi3mr_ioc *mrioc, u16 host_tag, + struct mpi3_default_reply *def_reply) +{ + u16 idx; + + switch (host_tag) { + case MPI3MR_HOSTTAG_INITCMDS: + return &mrioc->init_cmds; + case MPI3MR_HOSTTAG_CFG_CMDS: + return &mrioc->cfg_cmds; + case MPI3MR_HOSTTAG_BSG_CMDS: + return &mrioc->bsg_cmds; + case MPI3MR_HOSTTAG_BLK_TMS: + return &mrioc->host_tm_cmds; + case MPI3MR_HOSTTAG_PEL_ABORT: + return &mrioc->pel_abort_cmd; + case MPI3MR_HOSTTAG_PEL_WAIT: + return &mrioc->pel_cmds; + case MPI3MR_HOSTTAG_TRANSPORT_CMDS: + return &mrioc->transport_cmds; + case MPI3MR_HOSTTAG_INVALID: + if (def_reply && def_reply->function == + MPI3_FUNCTION_EVENT_NOTIFICATION) + mpi3mr_handle_events(mrioc, def_reply); + return NULL; + default: + break; + } + if (host_tag >= MPI3MR_HOSTTAG_DEVRMCMD_MIN && + host_tag <= MPI3MR_HOSTTAG_DEVRMCMD_MAX) { + idx = host_tag - MPI3MR_HOSTTAG_DEVRMCMD_MIN; + return &mrioc->dev_rmhs_cmds[idx]; + } + + if (host_tag >= MPI3MR_HOSTTAG_EVTACKCMD_MIN && + host_tag <= MPI3MR_HOSTTAG_EVTACKCMD_MAX) { + idx = host_tag - MPI3MR_HOSTTAG_EVTACKCMD_MIN; + return &mrioc->evtack_cmds[idx]; + } + + return NULL; +} + +static void mpi3mr_process_admin_reply_desc(struct mpi3mr_ioc *mrioc, + struct mpi3_default_reply_descriptor *reply_desc, u64 *reply_dma) +{ + u16 reply_desc_type, host_tag = 0; + u16 ioc_status = MPI3_IOCSTATUS_SUCCESS; + u32 ioc_loginfo = 0; + struct mpi3_status_reply_descriptor *status_desc; + struct mpi3_address_reply_descriptor *addr_desc; + struct mpi3_success_reply_descriptor *success_desc; + struct mpi3_default_reply *def_reply = NULL; + struct mpi3mr_drv_cmd *cmdptr = NULL; + struct mpi3_scsi_io_reply *scsi_reply; + u8 *sense_buf = NULL; + + *reply_dma = 0; + reply_desc_type = le16_to_cpu(reply_desc->reply_flags) & + MPI3_REPLY_DESCRIPT_FLAGS_TYPE_MASK; + switch (reply_desc_type) { + case MPI3_REPLY_DESCRIPT_FLAGS_TYPE_STATUS: + status_desc = (struct mpi3_status_reply_descriptor *)reply_desc; + host_tag = le16_to_cpu(status_desc->host_tag); + ioc_status = le16_to_cpu(status_desc->ioc_status); + if (ioc_status & + MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_LOGINFOAVAIL) + ioc_loginfo = le32_to_cpu(status_desc->ioc_log_info); + ioc_status &= MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_STATUS_MASK; + break; + case MPI3_REPLY_DESCRIPT_FLAGS_TYPE_ADDRESS_REPLY: + addr_desc = (struct mpi3_address_reply_descriptor *)reply_desc; + *reply_dma = le64_to_cpu(addr_desc->reply_frame_address); + def_reply = mpi3mr_get_reply_virt_addr(mrioc, *reply_dma); + if (!def_reply) + goto out; + host_tag = le16_to_cpu(def_reply->host_tag); + ioc_status = le16_to_cpu(def_reply->ioc_status); + if (ioc_status & + MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_LOGINFOAVAIL) + ioc_loginfo = le32_to_cpu(def_reply->ioc_log_info); + ioc_status &= MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_STATUS_MASK; + if (def_reply->function == MPI3_FUNCTION_SCSI_IO) { + scsi_reply = (struct mpi3_scsi_io_reply *)def_reply; + sense_buf = mpi3mr_get_sensebuf_virt_addr(mrioc, + le64_to_cpu(scsi_reply->sense_data_buffer_address)); + } + break; + case MPI3_REPLY_DESCRIPT_FLAGS_TYPE_SUCCESS: + success_desc = (struct mpi3_success_reply_descriptor *)reply_desc; + host_tag = le16_to_cpu(success_desc->host_tag); + break; + default: + break; + } + + cmdptr = mpi3mr_get_drv_cmd(mrioc, host_tag, def_reply); + if (cmdptr) { + if (cmdptr->state & MPI3MR_CMD_PENDING) { + cmdptr->state |= MPI3MR_CMD_COMPLETE; + cmdptr->ioc_loginfo = ioc_loginfo; + cmdptr->ioc_status = ioc_status; + cmdptr->state &= ~MPI3MR_CMD_PENDING; + if (def_reply) { + cmdptr->state |= MPI3MR_CMD_REPLY_VALID; + memcpy((u8 *)cmdptr->reply, (u8 *)def_reply, + mrioc->reply_sz); + } + if (sense_buf && cmdptr->sensebuf) { + cmdptr->is_sense = 1; + memcpy(cmdptr->sensebuf, sense_buf, + MPI3MR_SENSE_BUF_SZ); + } + if (cmdptr->is_waiting) { + complete(&cmdptr->done); + cmdptr->is_waiting = 0; + } else if (cmdptr->callback) + cmdptr->callback(mrioc, cmdptr); + } + } +out: + if (sense_buf) + mpi3mr_repost_sense_buf(mrioc, + le64_to_cpu(scsi_reply->sense_data_buffer_address)); +} + +int mpi3mr_process_admin_reply_q(struct mpi3mr_ioc *mrioc) +{ + u32 exp_phase = mrioc->admin_reply_ephase; + u32 admin_reply_ci = mrioc->admin_reply_ci; + u32 num_admin_replies = 0; + u64 reply_dma = 0; + struct mpi3_default_reply_descriptor *reply_desc; + + if (!atomic_add_unless(&mrioc->admin_reply_q_in_use, 1, 1)) + return 0; + + reply_desc = (struct mpi3_default_reply_descriptor *)mrioc->admin_reply_base + + admin_reply_ci; + + if ((le16_to_cpu(reply_desc->reply_flags) & + MPI3_REPLY_DESCRIPT_FLAGS_PHASE_MASK) != exp_phase) { + atomic_dec(&mrioc->admin_reply_q_in_use); + return 0; + } + + do { + if (mrioc->unrecoverable) + break; + + mrioc->admin_req_ci = le16_to_cpu(reply_desc->request_queue_ci); + mpi3mr_process_admin_reply_desc(mrioc, reply_desc, &reply_dma); + if (reply_dma) + mpi3mr_repost_reply_buf(mrioc, reply_dma); + num_admin_replies++; + if (++admin_reply_ci == mrioc->num_admin_replies) { + admin_reply_ci = 0; + exp_phase ^= 1; + } + reply_desc = + (struct mpi3_default_reply_descriptor *)mrioc->admin_reply_base + + admin_reply_ci; + if ((le16_to_cpu(reply_desc->reply_flags) & + MPI3_REPLY_DESCRIPT_FLAGS_PHASE_MASK) != exp_phase) + break; + } while (1); + + writel(admin_reply_ci, &mrioc->sysif_regs->admin_reply_queue_ci); + mrioc->admin_reply_ci = admin_reply_ci; + mrioc->admin_reply_ephase = exp_phase; + atomic_dec(&mrioc->admin_reply_q_in_use); + + return num_admin_replies; +} + +/** + * mpi3mr_get_reply_desc - get reply descriptor frame corresponding to + * queue's consumer index from operational reply descriptor queue. + * @op_reply_q: op_reply_qinfo object + * @reply_ci: operational reply descriptor's queue consumer index + * + * Returns reply descriptor frame address + */ +static inline struct mpi3_default_reply_descriptor * +mpi3mr_get_reply_desc(struct op_reply_qinfo *op_reply_q, u32 reply_ci) +{ + void *segment_base_addr; + struct segments *segments = op_reply_q->q_segments; + struct mpi3_default_reply_descriptor *reply_desc = NULL; + + segment_base_addr = + segments[reply_ci / op_reply_q->segment_qd].segment; + reply_desc = (struct mpi3_default_reply_descriptor *)segment_base_addr + + (reply_ci % op_reply_q->segment_qd); + return reply_desc; +} + +/** + * mpi3mr_process_op_reply_q - Operational reply queue handler + * @mrioc: Adapter instance reference + * @op_reply_q: Operational reply queue info + * + * Checks the specific operational reply queue and drains the + * reply queue entries until the queue is empty and process the + * individual reply descriptors. + * + * Return: 0 if queue is already processed,or number of reply + * descriptors processed. + */ +int mpi3mr_process_op_reply_q(struct mpi3mr_ioc *mrioc, + struct op_reply_qinfo *op_reply_q) +{ + struct op_req_qinfo *op_req_q; + u32 exp_phase; + u32 reply_ci; + u32 num_op_reply = 0; + u64 reply_dma = 0; + struct mpi3_default_reply_descriptor *reply_desc; + u16 req_q_idx = 0, reply_qidx; + + reply_qidx = op_reply_q->qid - 1; + + if (!atomic_add_unless(&op_reply_q->in_use, 1, 1)) + return 0; + + exp_phase = op_reply_q->ephase; + reply_ci = op_reply_q->ci; + + reply_desc = mpi3mr_get_reply_desc(op_reply_q, reply_ci); + if ((le16_to_cpu(reply_desc->reply_flags) & + MPI3_REPLY_DESCRIPT_FLAGS_PHASE_MASK) != exp_phase) { + atomic_dec(&op_reply_q->in_use); + return 0; + } + + do { + if (mrioc->unrecoverable) + break; + + req_q_idx = le16_to_cpu(reply_desc->request_queue_id) - 1; + op_req_q = &mrioc->req_qinfo[req_q_idx]; + + WRITE_ONCE(op_req_q->ci, le16_to_cpu(reply_desc->request_queue_ci)); + mpi3mr_process_op_reply_desc(mrioc, reply_desc, &reply_dma, + reply_qidx); + atomic_dec(&op_reply_q->pend_ios); + if (reply_dma) + mpi3mr_repost_reply_buf(mrioc, reply_dma); + num_op_reply++; + + if (++reply_ci == op_reply_q->num_replies) { + reply_ci = 0; + exp_phase ^= 1; + } + + reply_desc = mpi3mr_get_reply_desc(op_reply_q, reply_ci); + + if ((le16_to_cpu(reply_desc->reply_flags) & + MPI3_REPLY_DESCRIPT_FLAGS_PHASE_MASK) != exp_phase) + break; +#ifndef CONFIG_PREEMPT_RT + /* + * Exit completion loop to avoid CPU lockup + * Ensure remaining completion happens from threaded ISR. + */ + if (num_op_reply > mrioc->max_host_ios) { + op_reply_q->enable_irq_poll = true; + break; + } +#endif + } while (1); + + writel(reply_ci, + &mrioc->sysif_regs->oper_queue_indexes[reply_qidx].consumer_index); + op_reply_q->ci = reply_ci; + op_reply_q->ephase = exp_phase; + + atomic_dec(&op_reply_q->in_use); + return num_op_reply; +} + +/** + * mpi3mr_blk_mq_poll - Operational reply queue handler + * @shost: SCSI Host reference + * @queue_num: Request queue number (w.r.t OS it is hardware context number) + * + * Checks the specific operational reply queue and drains the + * reply queue entries until the queue is empty and process the + * individual reply descriptors. + * + * Return: 0 if queue is already processed,or number of reply + * descriptors processed. + */ +int mpi3mr_blk_mq_poll(struct Scsi_Host *shost, unsigned int queue_num) +{ + int num_entries = 0; + struct mpi3mr_ioc *mrioc; + + mrioc = (struct mpi3mr_ioc *)shost->hostdata; + + if ((mrioc->reset_in_progress || mrioc->prepare_for_reset || + mrioc->unrecoverable)) + return 0; + + num_entries = mpi3mr_process_op_reply_q(mrioc, + &mrioc->op_reply_qinfo[queue_num]); + + return num_entries; +} + +static irqreturn_t mpi3mr_isr_primary(int irq, void *privdata) +{ + struct mpi3mr_intr_info *intr_info = privdata; + struct mpi3mr_ioc *mrioc; + u16 midx; + u32 num_admin_replies = 0, num_op_reply = 0; + + if (!intr_info) + return IRQ_NONE; + + mrioc = intr_info->mrioc; + + if (!mrioc->intr_enabled) + return IRQ_NONE; + + midx = intr_info->msix_index; + + if (!midx) + num_admin_replies = mpi3mr_process_admin_reply_q(mrioc); + if (intr_info->op_reply_q) + num_op_reply = mpi3mr_process_op_reply_q(mrioc, + intr_info->op_reply_q); + + if (num_admin_replies || num_op_reply) + return IRQ_HANDLED; + else + return IRQ_NONE; +} + +#ifndef CONFIG_PREEMPT_RT + +static irqreturn_t mpi3mr_isr(int irq, void *privdata) +{ + struct mpi3mr_intr_info *intr_info = privdata; + int ret; + + if (!intr_info) + return IRQ_NONE; + + /* Call primary ISR routine */ + ret = mpi3mr_isr_primary(irq, privdata); + + /* + * If more IOs are expected, schedule IRQ polling thread. + * Otherwise exit from ISR. + */ + if (!intr_info->op_reply_q) + return ret; + + if (!intr_info->op_reply_q->enable_irq_poll || + !atomic_read(&intr_info->op_reply_q->pend_ios)) + return ret; + + disable_irq_nosync(intr_info->os_irq); + + return IRQ_WAKE_THREAD; +} + +/** + * mpi3mr_isr_poll - Reply queue polling routine + * @irq: IRQ + * @privdata: Interrupt info + * + * poll for pending I/O completions in a loop until pending I/Os + * present or controller queue depth I/Os are processed. + * + * Return: IRQ_NONE or IRQ_HANDLED + */ +static irqreturn_t mpi3mr_isr_poll(int irq, void *privdata) +{ + struct mpi3mr_intr_info *intr_info = privdata; + struct mpi3mr_ioc *mrioc; + u16 midx; + u32 num_op_reply = 0; + + if (!intr_info || !intr_info->op_reply_q) + return IRQ_NONE; + + mrioc = intr_info->mrioc; + midx = intr_info->msix_index; + + /* Poll for pending IOs completions */ + do { + if (!mrioc->intr_enabled || mrioc->unrecoverable) + break; + + if (!midx) + mpi3mr_process_admin_reply_q(mrioc); + if (intr_info->op_reply_q) + num_op_reply += + mpi3mr_process_op_reply_q(mrioc, + intr_info->op_reply_q); + + usleep_range(MPI3MR_IRQ_POLL_SLEEP, 10 * MPI3MR_IRQ_POLL_SLEEP); + + } while (atomic_read(&intr_info->op_reply_q->pend_ios) && + (num_op_reply < mrioc->max_host_ios)); + + intr_info->op_reply_q->enable_irq_poll = false; + enable_irq(intr_info->os_irq); + + return IRQ_HANDLED; +} + +#endif + +/** + * mpi3mr_request_irq - Request IRQ and register ISR + * @mrioc: Adapter instance reference + * @index: IRQ vector index + * + * Request threaded ISR with primary ISR and secondary + * + * Return: 0 on success and non zero on failures. + */ +static inline int mpi3mr_request_irq(struct mpi3mr_ioc *mrioc, u16 index) +{ + struct pci_dev *pdev = mrioc->pdev; + struct mpi3mr_intr_info *intr_info = mrioc->intr_info + index; + int retval = 0; + + intr_info->mrioc = mrioc; + intr_info->msix_index = index; + intr_info->op_reply_q = NULL; + + snprintf(intr_info->name, MPI3MR_NAME_LENGTH, "%s%d-msix%d", + mrioc->driver_name, mrioc->id, index); + +#ifndef CONFIG_PREEMPT_RT + retval = request_threaded_irq(pci_irq_vector(pdev, index), mpi3mr_isr, + mpi3mr_isr_poll, IRQF_SHARED, intr_info->name, intr_info); +#else + retval = request_threaded_irq(pci_irq_vector(pdev, index), mpi3mr_isr_primary, + NULL, IRQF_SHARED, intr_info->name, intr_info); +#endif + if (retval) { + ioc_err(mrioc, "%s: Unable to allocate interrupt %d!\n", + intr_info->name, pci_irq_vector(pdev, index)); + return retval; + } + + intr_info->os_irq = pci_irq_vector(pdev, index); + return retval; +} + +static void mpi3mr_calc_poll_queues(struct mpi3mr_ioc *mrioc, u16 max_vectors) +{ + if (!mrioc->requested_poll_qcount) + return; + + /* Reserved for Admin and Default Queue */ + if (max_vectors > 2 && + (mrioc->requested_poll_qcount < max_vectors - 2)) { + ioc_info(mrioc, + "enabled polled queues (%d) msix (%d)\n", + mrioc->requested_poll_qcount, max_vectors); + } else { + ioc_info(mrioc, + "disabled polled queues (%d) msix (%d) because of no resources for default queue\n", + mrioc->requested_poll_qcount, max_vectors); + mrioc->requested_poll_qcount = 0; + } +} + +/** + * mpi3mr_setup_isr - Setup ISR for the controller + * @mrioc: Adapter instance reference + * @setup_one: Request one IRQ or more + * + * Allocate IRQ vectors and call mpi3mr_request_irq to setup ISR + * + * Return: 0 on success and non zero on failures. + */ +static int mpi3mr_setup_isr(struct mpi3mr_ioc *mrioc, u8 setup_one) +{ + unsigned int irq_flags = PCI_IRQ_MSIX; + int max_vectors, min_vec; + int retval; + int i; + struct irq_affinity desc = { .pre_vectors = 1, .post_vectors = 1 }; + + if (mrioc->is_intr_info_set) + return 0; + + mpi3mr_cleanup_isr(mrioc); + + if (setup_one || reset_devices) { + max_vectors = 1; + retval = pci_alloc_irq_vectors(mrioc->pdev, + 1, max_vectors, irq_flags); + if (retval < 0) { + ioc_err(mrioc, "cannot allocate irq vectors, ret %d\n", + retval); + goto out_failed; + } + } else { + max_vectors = + min_t(int, mrioc->cpu_count + 1 + + mrioc->requested_poll_qcount, mrioc->msix_count); + + mpi3mr_calc_poll_queues(mrioc, max_vectors); + + ioc_info(mrioc, + "MSI-X vectors supported: %d, no of cores: %d,", + mrioc->msix_count, mrioc->cpu_count); + ioc_info(mrioc, + "MSI-x vectors requested: %d poll_queues %d\n", + max_vectors, mrioc->requested_poll_qcount); + + desc.post_vectors = mrioc->requested_poll_qcount; + min_vec = desc.pre_vectors + desc.post_vectors; + irq_flags |= PCI_IRQ_AFFINITY | PCI_IRQ_ALL_TYPES; + + retval = pci_alloc_irq_vectors_affinity(mrioc->pdev, + min_vec, max_vectors, irq_flags, &desc); + + if (retval < 0) { + ioc_err(mrioc, "cannot allocate irq vectors, ret %d\n", + retval); + goto out_failed; + } + + + /* + * If only one MSI-x is allocated, then MSI-x 0 will be shared + * between Admin queue and operational queue + */ + if (retval == min_vec) + mrioc->op_reply_q_offset = 0; + else if (retval != (max_vectors)) { + ioc_info(mrioc, + "allocated vectors (%d) are less than configured (%d)\n", + retval, max_vectors); + } + + max_vectors = retval; + mrioc->op_reply_q_offset = (max_vectors > 1) ? 1 : 0; + + mpi3mr_calc_poll_queues(mrioc, max_vectors); + + } + + mrioc->intr_info = kzalloc(sizeof(struct mpi3mr_intr_info) * max_vectors, + GFP_KERNEL); + if (!mrioc->intr_info) { + retval = -ENOMEM; + pci_free_irq_vectors(mrioc->pdev); + goto out_failed; + } + for (i = 0; i < max_vectors; i++) { + retval = mpi3mr_request_irq(mrioc, i); + if (retval) { + mrioc->intr_info_count = i; + goto out_failed; + } + } + if (reset_devices || !setup_one) + mrioc->is_intr_info_set = true; + mrioc->intr_info_count = max_vectors; + mpi3mr_ioc_enable_intr(mrioc); + return 0; + +out_failed: + mpi3mr_cleanup_isr(mrioc); + + return retval; +} + +static const struct { + enum mpi3mr_iocstate value; + char *name; +} mrioc_states[] = { + { MRIOC_STATE_READY, "ready" }, + { MRIOC_STATE_FAULT, "fault" }, + { MRIOC_STATE_RESET, "reset" }, + { MRIOC_STATE_BECOMING_READY, "becoming ready" }, + { MRIOC_STATE_RESET_REQUESTED, "reset requested" }, + { MRIOC_STATE_UNRECOVERABLE, "unrecoverable error" }, +}; + +static const char *mpi3mr_iocstate_name(enum mpi3mr_iocstate mrioc_state) +{ + int i; + char *name = NULL; + + for (i = 0; i < ARRAY_SIZE(mrioc_states); i++) { + if (mrioc_states[i].value == mrioc_state) { + name = mrioc_states[i].name; + break; + } + } + return name; +} + +/* Reset reason to name mapper structure*/ +static const struct { + enum mpi3mr_reset_reason value; + char *name; +} mpi3mr_reset_reason_codes[] = { + { MPI3MR_RESET_FROM_BRINGUP, "timeout in bringup" }, + { MPI3MR_RESET_FROM_FAULT_WATCH, "fault" }, + { MPI3MR_RESET_FROM_APP, "application invocation" }, + { MPI3MR_RESET_FROM_EH_HOS, "error handling" }, + { MPI3MR_RESET_FROM_TM_TIMEOUT, "TM timeout" }, + { MPI3MR_RESET_FROM_APP_TIMEOUT, "application command timeout" }, + { MPI3MR_RESET_FROM_MUR_FAILURE, "MUR failure" }, + { MPI3MR_RESET_FROM_CTLR_CLEANUP, "timeout in controller cleanup" }, + { MPI3MR_RESET_FROM_CIACTIV_FAULT, "component image activation fault" }, + { MPI3MR_RESET_FROM_PE_TIMEOUT, "port enable timeout" }, + { MPI3MR_RESET_FROM_TSU_TIMEOUT, "time stamp update timeout" }, + { MPI3MR_RESET_FROM_DELREQQ_TIMEOUT, "delete request queue timeout" }, + { MPI3MR_RESET_FROM_DELREPQ_TIMEOUT, "delete reply queue timeout" }, + { + MPI3MR_RESET_FROM_CREATEREPQ_TIMEOUT, + "create request queue timeout" + }, + { + MPI3MR_RESET_FROM_CREATEREQQ_TIMEOUT, + "create reply queue timeout" + }, + { MPI3MR_RESET_FROM_IOCFACTS_TIMEOUT, "IOC facts timeout" }, + { MPI3MR_RESET_FROM_IOCINIT_TIMEOUT, "IOC init timeout" }, + { MPI3MR_RESET_FROM_EVTNOTIFY_TIMEOUT, "event notify timeout" }, + { MPI3MR_RESET_FROM_EVTACK_TIMEOUT, "event acknowledgment timeout" }, + { + MPI3MR_RESET_FROM_CIACTVRST_TIMER, + "component image activation timeout" + }, + { + MPI3MR_RESET_FROM_GETPKGVER_TIMEOUT, + "get package version timeout" + }, + { MPI3MR_RESET_FROM_SYSFS, "sysfs invocation" }, + { MPI3MR_RESET_FROM_SYSFS_TIMEOUT, "sysfs TM timeout" }, + { MPI3MR_RESET_FROM_FIRMWARE, "firmware asynchronous reset" }, + { MPI3MR_RESET_FROM_CFG_REQ_TIMEOUT, "configuration request timeout"}, + { MPI3MR_RESET_FROM_SAS_TRANSPORT_TIMEOUT, "timeout of a SAS transport layer request" }, +}; + +/** + * mpi3mr_reset_rc_name - get reset reason code name + * @reason_code: reset reason code value + * + * Map reset reason to an NULL terminated ASCII string + * + * Return: name corresponding to reset reason value or NULL. + */ +static const char *mpi3mr_reset_rc_name(enum mpi3mr_reset_reason reason_code) +{ + int i; + char *name = NULL; + + for (i = 0; i < ARRAY_SIZE(mpi3mr_reset_reason_codes); i++) { + if (mpi3mr_reset_reason_codes[i].value == reason_code) { + name = mpi3mr_reset_reason_codes[i].name; + break; + } + } + return name; +} + +/* Reset type to name mapper structure*/ +static const struct { + u16 reset_type; + char *name; +} mpi3mr_reset_types[] = { + { MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET, "soft" }, + { MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT, "diag fault" }, +}; + +/** + * mpi3mr_reset_type_name - get reset type name + * @reset_type: reset type value + * + * Map reset type to an NULL terminated ASCII string + * + * Return: name corresponding to reset type value or NULL. + */ +static const char *mpi3mr_reset_type_name(u16 reset_type) +{ + int i; + char *name = NULL; + + for (i = 0; i < ARRAY_SIZE(mpi3mr_reset_types); i++) { + if (mpi3mr_reset_types[i].reset_type == reset_type) { + name = mpi3mr_reset_types[i].name; + break; + } + } + return name; +} + +/** + * mpi3mr_print_fault_info - Display fault information + * @mrioc: Adapter instance reference + * + * Display the controller fault information if there is a + * controller fault. + * + * Return: Nothing. + */ +void mpi3mr_print_fault_info(struct mpi3mr_ioc *mrioc) +{ + u32 ioc_status, code, code1, code2, code3; + + ioc_status = readl(&mrioc->sysif_regs->ioc_status); + + if (ioc_status & MPI3_SYSIF_IOC_STATUS_FAULT) { + code = readl(&mrioc->sysif_regs->fault); + code1 = readl(&mrioc->sysif_regs->fault_info[0]); + code2 = readl(&mrioc->sysif_regs->fault_info[1]); + code3 = readl(&mrioc->sysif_regs->fault_info[2]); + + ioc_info(mrioc, + "fault code(0x%08X): Additional code: (0x%08X:0x%08X:0x%08X)\n", + code, code1, code2, code3); + } +} + +/** + * mpi3mr_get_iocstate - Get IOC State + * @mrioc: Adapter instance reference + * + * Return a proper IOC state enum based on the IOC status and + * IOC configuration and unrcoverable state of the controller. + * + * Return: Current IOC state. + */ +enum mpi3mr_iocstate mpi3mr_get_iocstate(struct mpi3mr_ioc *mrioc) +{ + u32 ioc_status, ioc_config; + u8 ready, enabled; + + ioc_status = readl(&mrioc->sysif_regs->ioc_status); + ioc_config = readl(&mrioc->sysif_regs->ioc_configuration); + + if (mrioc->unrecoverable) + return MRIOC_STATE_UNRECOVERABLE; + if (ioc_status & MPI3_SYSIF_IOC_STATUS_FAULT) + return MRIOC_STATE_FAULT; + + ready = (ioc_status & MPI3_SYSIF_IOC_STATUS_READY); + enabled = (ioc_config & MPI3_SYSIF_IOC_CONFIG_ENABLE_IOC); + + if (ready && enabled) + return MRIOC_STATE_READY; + if ((!ready) && (!enabled)) + return MRIOC_STATE_RESET; + if ((!ready) && (enabled)) + return MRIOC_STATE_BECOMING_READY; + + return MRIOC_STATE_RESET_REQUESTED; +} + +/** + * mpi3mr_clear_reset_history - clear reset history + * @mrioc: Adapter instance reference + * + * Write the reset history bit in IOC status to clear the bit, + * if it is already set. + * + * Return: Nothing. + */ +static inline void mpi3mr_clear_reset_history(struct mpi3mr_ioc *mrioc) +{ + u32 ioc_status; + + ioc_status = readl(&mrioc->sysif_regs->ioc_status); + if (ioc_status & MPI3_SYSIF_IOC_STATUS_RESET_HISTORY) + writel(ioc_status, &mrioc->sysif_regs->ioc_status); +} + +/** + * mpi3mr_issue_and_process_mur - Message unit Reset handler + * @mrioc: Adapter instance reference + * @reset_reason: Reset reason code + * + * Issue Message unit Reset to the controller and wait for it to + * be complete. + * + * Return: 0 on success, -1 on failure. + */ +static int mpi3mr_issue_and_process_mur(struct mpi3mr_ioc *mrioc, + u32 reset_reason) +{ + u32 ioc_config, timeout, ioc_status; + int retval = -1; + + ioc_info(mrioc, "Issuing Message unit Reset(MUR)\n"); + if (mrioc->unrecoverable) { + ioc_info(mrioc, "IOC is unrecoverable MUR not issued\n"); + return retval; + } + mpi3mr_clear_reset_history(mrioc); + writel(reset_reason, &mrioc->sysif_regs->scratchpad[0]); + ioc_config = readl(&mrioc->sysif_regs->ioc_configuration); + ioc_config &= ~MPI3_SYSIF_IOC_CONFIG_ENABLE_IOC; + writel(ioc_config, &mrioc->sysif_regs->ioc_configuration); + + timeout = MPI3MR_MUR_TIMEOUT * 10; + do { + ioc_status = readl(&mrioc->sysif_regs->ioc_status); + if ((ioc_status & MPI3_SYSIF_IOC_STATUS_RESET_HISTORY)) { + mpi3mr_clear_reset_history(mrioc); + break; + } + if (ioc_status & MPI3_SYSIF_IOC_STATUS_FAULT) { + mpi3mr_print_fault_info(mrioc); + break; + } + msleep(100); + } while (--timeout); + + ioc_config = readl(&mrioc->sysif_regs->ioc_configuration); + if (timeout && !((ioc_status & MPI3_SYSIF_IOC_STATUS_READY) || + (ioc_status & MPI3_SYSIF_IOC_STATUS_FAULT) || + (ioc_config & MPI3_SYSIF_IOC_CONFIG_ENABLE_IOC))) + retval = 0; + + ioc_info(mrioc, "Base IOC Sts/Config after %s MUR is (0x%x)/(0x%x)\n", + (!retval) ? "successful" : "failed", ioc_status, ioc_config); + return retval; +} + +/** + * mpi3mr_revalidate_factsdata - validate IOCFacts parameters + * during reset/resume + * @mrioc: Adapter instance reference + * + * Return zero if the new IOCFacts parameters value is compatible with + * older values else return -EPERM + */ +static int +mpi3mr_revalidate_factsdata(struct mpi3mr_ioc *mrioc) +{ + unsigned long *removepend_bitmap; + + if (mrioc->facts.reply_sz > mrioc->reply_sz) { + ioc_err(mrioc, + "cannot increase reply size from %d to %d\n", + mrioc->reply_sz, mrioc->facts.reply_sz); + return -EPERM; + } + + if (mrioc->facts.max_op_reply_q < mrioc->num_op_reply_q) { + ioc_err(mrioc, + "cannot reduce number of operational reply queues from %d to %d\n", + mrioc->num_op_reply_q, + mrioc->facts.max_op_reply_q); + return -EPERM; + } + + if (mrioc->facts.max_op_req_q < mrioc->num_op_req_q) { + ioc_err(mrioc, + "cannot reduce number of operational request queues from %d to %d\n", + mrioc->num_op_req_q, mrioc->facts.max_op_req_q); + return -EPERM; + } + + if (mrioc->shost->max_sectors != (mrioc->facts.max_data_length / 512)) + ioc_err(mrioc, "Warning: The maximum data transfer length\n" + "\tchanged after reset: previous(%d), new(%d),\n" + "the driver cannot change this at run time\n", + mrioc->shost->max_sectors * 512, mrioc->facts.max_data_length); + + if ((mrioc->sas_transport_enabled) && (mrioc->facts.ioc_capabilities & + MPI3_IOCFACTS_CAPABILITY_MULTIPATH_ENABLED)) + ioc_err(mrioc, + "critical error: multipath capability is enabled at the\n" + "\tcontroller while sas transport support is enabled at the\n" + "\tdriver, please reboot the system or reload the driver\n"); + + if (mrioc->facts.max_devhandle > mrioc->dev_handle_bitmap_bits) { + removepend_bitmap = bitmap_zalloc(mrioc->facts.max_devhandle, + GFP_KERNEL); + if (!removepend_bitmap) { + ioc_err(mrioc, + "failed to increase removepend_bitmap bits from %d to %d\n", + mrioc->dev_handle_bitmap_bits, + mrioc->facts.max_devhandle); + return -EPERM; + } + bitmap_free(mrioc->removepend_bitmap); + mrioc->removepend_bitmap = removepend_bitmap; + ioc_info(mrioc, + "increased bits of dev_handle_bitmap from %d to %d\n", + mrioc->dev_handle_bitmap_bits, + mrioc->facts.max_devhandle); + mrioc->dev_handle_bitmap_bits = mrioc->facts.max_devhandle; + } + + return 0; +} + +/** + * mpi3mr_bring_ioc_ready - Bring controller to ready state + * @mrioc: Adapter instance reference + * + * Set Enable IOC bit in IOC configuration register and wait for + * the controller to become ready. + * + * Return: 0 on success, appropriate error on failure. + */ +static int mpi3mr_bring_ioc_ready(struct mpi3mr_ioc *mrioc) +{ + u32 ioc_config, ioc_status, timeout, host_diagnostic; + int retval = 0; + enum mpi3mr_iocstate ioc_state; + u64 base_info; + + ioc_status = readl(&mrioc->sysif_regs->ioc_status); + ioc_config = readl(&mrioc->sysif_regs->ioc_configuration); + base_info = lo_hi_readq(&mrioc->sysif_regs->ioc_information); + ioc_info(mrioc, "ioc_status(0x%08x), ioc_config(0x%08x), ioc_info(0x%016llx) at the bringup\n", + ioc_status, ioc_config, base_info); + + /*The timeout value is in 2sec unit, changing it to seconds*/ + mrioc->ready_timeout = + ((base_info & MPI3_SYSIF_IOC_INFO_LOW_TIMEOUT_MASK) >> + MPI3_SYSIF_IOC_INFO_LOW_TIMEOUT_SHIFT) * 2; + + ioc_info(mrioc, "ready timeout: %d seconds\n", mrioc->ready_timeout); + + ioc_state = mpi3mr_get_iocstate(mrioc); + ioc_info(mrioc, "controller is in %s state during detection\n", + mpi3mr_iocstate_name(ioc_state)); + + if (ioc_state == MRIOC_STATE_BECOMING_READY || + ioc_state == MRIOC_STATE_RESET_REQUESTED) { + timeout = mrioc->ready_timeout * 10; + do { + msleep(100); + } while (--timeout); + + if (!pci_device_is_present(mrioc->pdev)) { + mrioc->unrecoverable = 1; + ioc_err(mrioc, + "controller is not present while waiting to reset\n"); + retval = -1; + goto out_device_not_present; + } + + ioc_state = mpi3mr_get_iocstate(mrioc); + ioc_info(mrioc, + "controller is in %s state after waiting to reset\n", + mpi3mr_iocstate_name(ioc_state)); + } + + if (ioc_state == MRIOC_STATE_READY) { + ioc_info(mrioc, "issuing message unit reset (MUR) to bring to reset state\n"); + retval = mpi3mr_issue_and_process_mur(mrioc, + MPI3MR_RESET_FROM_BRINGUP); + ioc_state = mpi3mr_get_iocstate(mrioc); + if (retval) + ioc_err(mrioc, + "message unit reset failed with error %d current state %s\n", + retval, mpi3mr_iocstate_name(ioc_state)); + } + if (ioc_state != MRIOC_STATE_RESET) { + if (ioc_state == MRIOC_STATE_FAULT) { + timeout = MPI3_SYSIF_DIAG_SAVE_TIMEOUT * 10; + mpi3mr_print_fault_info(mrioc); + do { + host_diagnostic = + readl(&mrioc->sysif_regs->host_diagnostic); + if (!(host_diagnostic & + MPI3_SYSIF_HOST_DIAG_SAVE_IN_PROGRESS)) + break; + if (!pci_device_is_present(mrioc->pdev)) { + mrioc->unrecoverable = 1; + ioc_err(mrioc, "controller is not present at the bringup\n"); + goto out_device_not_present; + } + msleep(100); + } while (--timeout); + } + mpi3mr_print_fault_info(mrioc); + ioc_info(mrioc, "issuing soft reset to bring to reset state\n"); + retval = mpi3mr_issue_reset(mrioc, + MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET, + MPI3MR_RESET_FROM_BRINGUP); + if (retval) { + ioc_err(mrioc, + "soft reset failed with error %d\n", retval); + goto out_failed; + } + } + ioc_state = mpi3mr_get_iocstate(mrioc); + if (ioc_state != MRIOC_STATE_RESET) { + ioc_err(mrioc, + "cannot bring controller to reset state, current state: %s\n", + mpi3mr_iocstate_name(ioc_state)); + goto out_failed; + } + mpi3mr_clear_reset_history(mrioc); + retval = mpi3mr_setup_admin_qpair(mrioc); + if (retval) { + ioc_err(mrioc, "failed to setup admin queues: error %d\n", + retval); + goto out_failed; + } + + ioc_info(mrioc, "bringing controller to ready state\n"); + ioc_config = readl(&mrioc->sysif_regs->ioc_configuration); + ioc_config |= MPI3_SYSIF_IOC_CONFIG_ENABLE_IOC; + writel(ioc_config, &mrioc->sysif_regs->ioc_configuration); + + timeout = mrioc->ready_timeout * 10; + do { + ioc_state = mpi3mr_get_iocstate(mrioc); + if (ioc_state == MRIOC_STATE_READY) { + ioc_info(mrioc, + "successfully transitioned to %s state\n", + mpi3mr_iocstate_name(ioc_state)); + return 0; + } + if (!pci_device_is_present(mrioc->pdev)) { + mrioc->unrecoverable = 1; + ioc_err(mrioc, + "controller is not present at the bringup\n"); + retval = -1; + goto out_device_not_present; + } + msleep(100); + } while (--timeout); + +out_failed: + ioc_state = mpi3mr_get_iocstate(mrioc); + ioc_err(mrioc, + "failed to bring to ready state, current state: %s\n", + mpi3mr_iocstate_name(ioc_state)); +out_device_not_present: + return retval; +} + +/** + * mpi3mr_soft_reset_success - Check softreset is success or not + * @ioc_status: IOC status register value + * @ioc_config: IOC config register value + * + * Check whether the soft reset is successful or not based on + * IOC status and IOC config register values. + * + * Return: True when the soft reset is success, false otherwise. + */ +static inline bool +mpi3mr_soft_reset_success(u32 ioc_status, u32 ioc_config) +{ + if (!((ioc_status & MPI3_SYSIF_IOC_STATUS_READY) || + (ioc_config & MPI3_SYSIF_IOC_CONFIG_ENABLE_IOC))) + return true; + return false; +} + +/** + * mpi3mr_diagfault_success - Check diag fault is success or not + * @mrioc: Adapter reference + * @ioc_status: IOC status register value + * + * Check whether the controller hit diag reset fault code. + * + * Return: True when there is diag fault, false otherwise. + */ +static inline bool mpi3mr_diagfault_success(struct mpi3mr_ioc *mrioc, + u32 ioc_status) +{ + u32 fault; + + if (!(ioc_status & MPI3_SYSIF_IOC_STATUS_FAULT)) + return false; + fault = readl(&mrioc->sysif_regs->fault) & MPI3_SYSIF_FAULT_CODE_MASK; + if (fault == MPI3_SYSIF_FAULT_CODE_DIAG_FAULT_RESET) { + mpi3mr_print_fault_info(mrioc); + return true; + } + return false; +} + +/** + * mpi3mr_set_diagsave - Set diag save bit for snapdump + * @mrioc: Adapter reference + * + * Set diag save bit in IOC configuration register to enable + * snapdump. + * + * Return: Nothing. + */ +static inline void mpi3mr_set_diagsave(struct mpi3mr_ioc *mrioc) +{ + u32 ioc_config; + + ioc_config = readl(&mrioc->sysif_regs->ioc_configuration); + ioc_config |= MPI3_SYSIF_IOC_CONFIG_DIAG_SAVE; + writel(ioc_config, &mrioc->sysif_regs->ioc_configuration); +} + +/** + * mpi3mr_issue_reset - Issue reset to the controller + * @mrioc: Adapter reference + * @reset_type: Reset type + * @reset_reason: Reset reason code + * + * Unlock the host diagnostic registers and write the specific + * reset type to that, wait for reset acknowledgment from the + * controller, if the reset is not successful retry for the + * predefined number of times. + * + * Return: 0 on success, non-zero on failure. + */ +static int mpi3mr_issue_reset(struct mpi3mr_ioc *mrioc, u16 reset_type, + u32 reset_reason) +{ + int retval = -1; + u8 unlock_retry_count = 0; + u32 host_diagnostic, ioc_status, ioc_config; + u32 timeout = MPI3MR_RESET_ACK_TIMEOUT * 10; + + if ((reset_type != MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET) && + (reset_type != MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT)) + return retval; + if (mrioc->unrecoverable) + return retval; + if (reset_reason == MPI3MR_RESET_FROM_FIRMWARE) { + retval = 0; + return retval; + } + + ioc_info(mrioc, "%s reset due to %s(0x%x)\n", + mpi3mr_reset_type_name(reset_type), + mpi3mr_reset_rc_name(reset_reason), reset_reason); + + mpi3mr_clear_reset_history(mrioc); + do { + ioc_info(mrioc, + "Write magic sequence to unlock host diag register (retry=%d)\n", + ++unlock_retry_count); + if (unlock_retry_count >= MPI3MR_HOSTDIAG_UNLOCK_RETRY_COUNT) { + ioc_err(mrioc, + "%s reset failed due to unlock failure, host_diagnostic(0x%08x)\n", + mpi3mr_reset_type_name(reset_type), + host_diagnostic); + mrioc->unrecoverable = 1; + return retval; + } + + writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_FLUSH, + &mrioc->sysif_regs->write_sequence); + writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_1ST, + &mrioc->sysif_regs->write_sequence); + writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_2ND, + &mrioc->sysif_regs->write_sequence); + writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_3RD, + &mrioc->sysif_regs->write_sequence); + writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_4TH, + &mrioc->sysif_regs->write_sequence); + writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_5TH, + &mrioc->sysif_regs->write_sequence); + writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_6TH, + &mrioc->sysif_regs->write_sequence); + usleep_range(1000, 1100); + host_diagnostic = readl(&mrioc->sysif_regs->host_diagnostic); + ioc_info(mrioc, + "wrote magic sequence: retry_count(%d), host_diagnostic(0x%08x)\n", + unlock_retry_count, host_diagnostic); + } while (!(host_diagnostic & MPI3_SYSIF_HOST_DIAG_DIAG_WRITE_ENABLE)); + + writel(reset_reason, &mrioc->sysif_regs->scratchpad[0]); + writel(host_diagnostic | reset_type, + &mrioc->sysif_regs->host_diagnostic); + switch (reset_type) { + case MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET: + do { + ioc_status = readl(&mrioc->sysif_regs->ioc_status); + ioc_config = + readl(&mrioc->sysif_regs->ioc_configuration); + if ((ioc_status & MPI3_SYSIF_IOC_STATUS_RESET_HISTORY) + && mpi3mr_soft_reset_success(ioc_status, ioc_config) + ) { + mpi3mr_clear_reset_history(mrioc); + retval = 0; + break; + } + msleep(100); + } while (--timeout); + mpi3mr_print_fault_info(mrioc); + break; + case MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT: + do { + ioc_status = readl(&mrioc->sysif_regs->ioc_status); + if (mpi3mr_diagfault_success(mrioc, ioc_status)) { + retval = 0; + break; + } + msleep(100); + } while (--timeout); + break; + default: + break; + } + + writel(MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_2ND, + &mrioc->sysif_regs->write_sequence); + + ioc_config = readl(&mrioc->sysif_regs->ioc_configuration); + ioc_status = readl(&mrioc->sysif_regs->ioc_status); + ioc_info(mrioc, + "ioc_status/ioc_onfig after %s reset is (0x%x)/(0x%x)\n", + (!retval)?"successful":"failed", ioc_status, + ioc_config); + if (retval) + mrioc->unrecoverable = 1; + return retval; +} + +/** + * mpi3mr_admin_request_post - Post request to admin queue + * @mrioc: Adapter reference + * @admin_req: MPI3 request + * @admin_req_sz: Request size + * @ignore_reset: Ignore reset in process + * + * Post the MPI3 request into admin request queue and + * inform the controller, if the queue is full return + * appropriate error. + * + * Return: 0 on success, non-zero on failure. + */ +int mpi3mr_admin_request_post(struct mpi3mr_ioc *mrioc, void *admin_req, + u16 admin_req_sz, u8 ignore_reset) +{ + u16 areq_pi = 0, areq_ci = 0, max_entries = 0; + int retval = 0; + unsigned long flags; + u8 *areq_entry; + + if (mrioc->unrecoverable) { + ioc_err(mrioc, "%s : Unrecoverable controller\n", __func__); + return -EFAULT; + } + + spin_lock_irqsave(&mrioc->admin_req_lock, flags); + areq_pi = mrioc->admin_req_pi; + areq_ci = mrioc->admin_req_ci; + max_entries = mrioc->num_admin_req; + if ((areq_ci == (areq_pi + 1)) || ((!areq_ci) && + (areq_pi == (max_entries - 1)))) { + ioc_err(mrioc, "AdminReqQ full condition detected\n"); + retval = -EAGAIN; + goto out; + } + if (!ignore_reset && mrioc->reset_in_progress) { + ioc_err(mrioc, "AdminReqQ submit reset in progress\n"); + retval = -EAGAIN; + goto out; + } + areq_entry = (u8 *)mrioc->admin_req_base + + (areq_pi * MPI3MR_ADMIN_REQ_FRAME_SZ); + memset(areq_entry, 0, MPI3MR_ADMIN_REQ_FRAME_SZ); + memcpy(areq_entry, (u8 *)admin_req, admin_req_sz); + + if (++areq_pi == max_entries) + areq_pi = 0; + mrioc->admin_req_pi = areq_pi; + + writel(mrioc->admin_req_pi, &mrioc->sysif_regs->admin_request_queue_pi); + +out: + spin_unlock_irqrestore(&mrioc->admin_req_lock, flags); + + return retval; +} + +/** + * mpi3mr_free_op_req_q_segments - free request memory segments + * @mrioc: Adapter instance reference + * @q_idx: operational request queue index + * + * Free memory segments allocated for operational request queue + * + * Return: Nothing. + */ +static void mpi3mr_free_op_req_q_segments(struct mpi3mr_ioc *mrioc, u16 q_idx) +{ + u16 j; + int size; + struct segments *segments; + + segments = mrioc->req_qinfo[q_idx].q_segments; + if (!segments) + return; + + if (mrioc->enable_segqueue) { + size = MPI3MR_OP_REQ_Q_SEG_SIZE; + if (mrioc->req_qinfo[q_idx].q_segment_list) { + dma_free_coherent(&mrioc->pdev->dev, + MPI3MR_MAX_SEG_LIST_SIZE, + mrioc->req_qinfo[q_idx].q_segment_list, + mrioc->req_qinfo[q_idx].q_segment_list_dma); + mrioc->req_qinfo[q_idx].q_segment_list = NULL; + } + } else + size = mrioc->req_qinfo[q_idx].segment_qd * + mrioc->facts.op_req_sz; + + for (j = 0; j < mrioc->req_qinfo[q_idx].num_segments; j++) { + if (!segments[j].segment) + continue; + dma_free_coherent(&mrioc->pdev->dev, + size, segments[j].segment, segments[j].segment_dma); + segments[j].segment = NULL; + } + kfree(mrioc->req_qinfo[q_idx].q_segments); + mrioc->req_qinfo[q_idx].q_segments = NULL; + mrioc->req_qinfo[q_idx].qid = 0; +} + +/** + * mpi3mr_free_op_reply_q_segments - free reply memory segments + * @mrioc: Adapter instance reference + * @q_idx: operational reply queue index + * + * Free memory segments allocated for operational reply queue + * + * Return: Nothing. + */ +static void mpi3mr_free_op_reply_q_segments(struct mpi3mr_ioc *mrioc, u16 q_idx) +{ + u16 j; + int size; + struct segments *segments; + + segments = mrioc->op_reply_qinfo[q_idx].q_segments; + if (!segments) + return; + + if (mrioc->enable_segqueue) { + size = MPI3MR_OP_REP_Q_SEG_SIZE; + if (mrioc->op_reply_qinfo[q_idx].q_segment_list) { + dma_free_coherent(&mrioc->pdev->dev, + MPI3MR_MAX_SEG_LIST_SIZE, + mrioc->op_reply_qinfo[q_idx].q_segment_list, + mrioc->op_reply_qinfo[q_idx].q_segment_list_dma); + mrioc->op_reply_qinfo[q_idx].q_segment_list = NULL; + } + } else + size = mrioc->op_reply_qinfo[q_idx].segment_qd * + mrioc->op_reply_desc_sz; + + for (j = 0; j < mrioc->op_reply_qinfo[q_idx].num_segments; j++) { + if (!segments[j].segment) + continue; + dma_free_coherent(&mrioc->pdev->dev, + size, segments[j].segment, segments[j].segment_dma); + segments[j].segment = NULL; + } + + kfree(mrioc->op_reply_qinfo[q_idx].q_segments); + mrioc->op_reply_qinfo[q_idx].q_segments = NULL; + mrioc->op_reply_qinfo[q_idx].qid = 0; +} + +/** + * mpi3mr_delete_op_reply_q - delete operational reply queue + * @mrioc: Adapter instance reference + * @qidx: operational reply queue index + * + * Delete operatinal reply queue by issuing MPI request + * through admin queue. + * + * Return: 0 on success, non-zero on failure. + */ +static int mpi3mr_delete_op_reply_q(struct mpi3mr_ioc *mrioc, u16 qidx) +{ + struct mpi3_delete_reply_queue_request delq_req; + struct op_reply_qinfo *op_reply_q = mrioc->op_reply_qinfo + qidx; + int retval = 0; + u16 reply_qid = 0, midx; + + reply_qid = op_reply_q->qid; + + midx = REPLY_QUEUE_IDX_TO_MSIX_IDX(qidx, mrioc->op_reply_q_offset); + + if (!reply_qid) { + retval = -1; + ioc_err(mrioc, "Issue DelRepQ: called with invalid ReqQID\n"); + goto out; + } + + (op_reply_q->qtype == MPI3MR_DEFAULT_QUEUE) ? mrioc->default_qcount-- : + mrioc->active_poll_qcount--; + + memset(&delq_req, 0, sizeof(delq_req)); + mutex_lock(&mrioc->init_cmds.mutex); + if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { + retval = -1; + ioc_err(mrioc, "Issue DelRepQ: Init command is in use\n"); + mutex_unlock(&mrioc->init_cmds.mutex); + goto out; + } + mrioc->init_cmds.state = MPI3MR_CMD_PENDING; + mrioc->init_cmds.is_waiting = 1; + mrioc->init_cmds.callback = NULL; + delq_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); + delq_req.function = MPI3_FUNCTION_DELETE_REPLY_QUEUE; + delq_req.queue_id = cpu_to_le16(reply_qid); + + init_completion(&mrioc->init_cmds.done); + retval = mpi3mr_admin_request_post(mrioc, &delq_req, sizeof(delq_req), + 1); + if (retval) { + ioc_err(mrioc, "Issue DelRepQ: Admin Post failed\n"); + goto out_unlock; + } + wait_for_completion_timeout(&mrioc->init_cmds.done, + (MPI3MR_INTADMCMD_TIMEOUT * HZ)); + if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { + ioc_err(mrioc, "delete reply queue timed out\n"); + mpi3mr_check_rh_fault_ioc(mrioc, + MPI3MR_RESET_FROM_DELREPQ_TIMEOUT); + retval = -1; + goto out_unlock; + } + if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK) + != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, + "Issue DelRepQ: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n", + (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK), + mrioc->init_cmds.ioc_loginfo); + retval = -1; + goto out_unlock; + } + mrioc->intr_info[midx].op_reply_q = NULL; + + mpi3mr_free_op_reply_q_segments(mrioc, qidx); +out_unlock: + mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; + mutex_unlock(&mrioc->init_cmds.mutex); +out: + + return retval; +} + +/** + * mpi3mr_alloc_op_reply_q_segments -Alloc segmented reply pool + * @mrioc: Adapter instance reference + * @qidx: request queue index + * + * Allocate segmented memory pools for operational reply + * queue. + * + * Return: 0 on success, non-zero on failure. + */ +static int mpi3mr_alloc_op_reply_q_segments(struct mpi3mr_ioc *mrioc, u16 qidx) +{ + struct op_reply_qinfo *op_reply_q = mrioc->op_reply_qinfo + qidx; + int i, size; + u64 *q_segment_list_entry = NULL; + struct segments *segments; + + if (mrioc->enable_segqueue) { + op_reply_q->segment_qd = + MPI3MR_OP_REP_Q_SEG_SIZE / mrioc->op_reply_desc_sz; + + size = MPI3MR_OP_REP_Q_SEG_SIZE; + + op_reply_q->q_segment_list = dma_alloc_coherent(&mrioc->pdev->dev, + MPI3MR_MAX_SEG_LIST_SIZE, &op_reply_q->q_segment_list_dma, + GFP_KERNEL); + if (!op_reply_q->q_segment_list) + return -ENOMEM; + q_segment_list_entry = (u64 *)op_reply_q->q_segment_list; + } else { + op_reply_q->segment_qd = op_reply_q->num_replies; + size = op_reply_q->num_replies * mrioc->op_reply_desc_sz; + } + + op_reply_q->num_segments = DIV_ROUND_UP(op_reply_q->num_replies, + op_reply_q->segment_qd); + + op_reply_q->q_segments = kcalloc(op_reply_q->num_segments, + sizeof(struct segments), GFP_KERNEL); + if (!op_reply_q->q_segments) + return -ENOMEM; + + segments = op_reply_q->q_segments; + for (i = 0; i < op_reply_q->num_segments; i++) { + segments[i].segment = + dma_alloc_coherent(&mrioc->pdev->dev, + size, &segments[i].segment_dma, GFP_KERNEL); + if (!segments[i].segment) + return -ENOMEM; + if (mrioc->enable_segqueue) + q_segment_list_entry[i] = + (unsigned long)segments[i].segment_dma; + } + + return 0; +} + +/** + * mpi3mr_alloc_op_req_q_segments - Alloc segmented req pool. + * @mrioc: Adapter instance reference + * @qidx: request queue index + * + * Allocate segmented memory pools for operational request + * queue. + * + * Return: 0 on success, non-zero on failure. + */ +static int mpi3mr_alloc_op_req_q_segments(struct mpi3mr_ioc *mrioc, u16 qidx) +{ + struct op_req_qinfo *op_req_q = mrioc->req_qinfo + qidx; + int i, size; + u64 *q_segment_list_entry = NULL; + struct segments *segments; + + if (mrioc->enable_segqueue) { + op_req_q->segment_qd = + MPI3MR_OP_REQ_Q_SEG_SIZE / mrioc->facts.op_req_sz; + + size = MPI3MR_OP_REQ_Q_SEG_SIZE; + + op_req_q->q_segment_list = dma_alloc_coherent(&mrioc->pdev->dev, + MPI3MR_MAX_SEG_LIST_SIZE, &op_req_q->q_segment_list_dma, + GFP_KERNEL); + if (!op_req_q->q_segment_list) + return -ENOMEM; + q_segment_list_entry = (u64 *)op_req_q->q_segment_list; + + } else { + op_req_q->segment_qd = op_req_q->num_requests; + size = op_req_q->num_requests * mrioc->facts.op_req_sz; + } + + op_req_q->num_segments = DIV_ROUND_UP(op_req_q->num_requests, + op_req_q->segment_qd); + + op_req_q->q_segments = kcalloc(op_req_q->num_segments, + sizeof(struct segments), GFP_KERNEL); + if (!op_req_q->q_segments) + return -ENOMEM; + + segments = op_req_q->q_segments; + for (i = 0; i < op_req_q->num_segments; i++) { + segments[i].segment = + dma_alloc_coherent(&mrioc->pdev->dev, + size, &segments[i].segment_dma, GFP_KERNEL); + if (!segments[i].segment) + return -ENOMEM; + if (mrioc->enable_segqueue) + q_segment_list_entry[i] = + (unsigned long)segments[i].segment_dma; + } + + return 0; +} + +/** + * mpi3mr_create_op_reply_q - create operational reply queue + * @mrioc: Adapter instance reference + * @qidx: operational reply queue index + * + * Create operatinal reply queue by issuing MPI request + * through admin queue. + * + * Return: 0 on success, non-zero on failure. + */ +static int mpi3mr_create_op_reply_q(struct mpi3mr_ioc *mrioc, u16 qidx) +{ + struct mpi3_create_reply_queue_request create_req; + struct op_reply_qinfo *op_reply_q = mrioc->op_reply_qinfo + qidx; + int retval = 0; + u16 reply_qid = 0, midx; + + reply_qid = op_reply_q->qid; + + midx = REPLY_QUEUE_IDX_TO_MSIX_IDX(qidx, mrioc->op_reply_q_offset); + + if (reply_qid) { + retval = -1; + ioc_err(mrioc, "CreateRepQ: called for duplicate qid %d\n", + reply_qid); + + return retval; + } + + reply_qid = qidx + 1; + op_reply_q->num_replies = MPI3MR_OP_REP_Q_QD; + if (!mrioc->pdev->revision) + op_reply_q->num_replies = MPI3MR_OP_REP_Q_QD4K; + op_reply_q->ci = 0; + op_reply_q->ephase = 1; + atomic_set(&op_reply_q->pend_ios, 0); + atomic_set(&op_reply_q->in_use, 0); + op_reply_q->enable_irq_poll = false; + + if (!op_reply_q->q_segments) { + retval = mpi3mr_alloc_op_reply_q_segments(mrioc, qidx); + if (retval) { + mpi3mr_free_op_reply_q_segments(mrioc, qidx); + goto out; + } + } + + memset(&create_req, 0, sizeof(create_req)); + mutex_lock(&mrioc->init_cmds.mutex); + if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { + retval = -1; + ioc_err(mrioc, "CreateRepQ: Init command is in use\n"); + goto out_unlock; + } + mrioc->init_cmds.state = MPI3MR_CMD_PENDING; + mrioc->init_cmds.is_waiting = 1; + mrioc->init_cmds.callback = NULL; + create_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); + create_req.function = MPI3_FUNCTION_CREATE_REPLY_QUEUE; + create_req.queue_id = cpu_to_le16(reply_qid); + + if (midx < (mrioc->intr_info_count - mrioc->requested_poll_qcount)) + op_reply_q->qtype = MPI3MR_DEFAULT_QUEUE; + else + op_reply_q->qtype = MPI3MR_POLL_QUEUE; + + if (op_reply_q->qtype == MPI3MR_DEFAULT_QUEUE) { + create_req.flags = + MPI3_CREATE_REPLY_QUEUE_FLAGS_INT_ENABLE_ENABLE; + create_req.msix_index = + cpu_to_le16(mrioc->intr_info[midx].msix_index); + } else { + create_req.msix_index = cpu_to_le16(mrioc->intr_info_count - 1); + ioc_info(mrioc, "create reply queue(polled): for qid(%d), midx(%d)\n", + reply_qid, midx); + if (!mrioc->active_poll_qcount) + disable_irq_nosync(pci_irq_vector(mrioc->pdev, + mrioc->intr_info_count - 1)); + } + + if (mrioc->enable_segqueue) { + create_req.flags |= + MPI3_CREATE_REQUEST_QUEUE_FLAGS_SEGMENTED_SEGMENTED; + create_req.base_address = cpu_to_le64( + op_reply_q->q_segment_list_dma); + } else + create_req.base_address = cpu_to_le64( + op_reply_q->q_segments[0].segment_dma); + + create_req.size = cpu_to_le16(op_reply_q->num_replies); + + init_completion(&mrioc->init_cmds.done); + retval = mpi3mr_admin_request_post(mrioc, &create_req, + sizeof(create_req), 1); + if (retval) { + ioc_err(mrioc, "CreateRepQ: Admin Post failed\n"); + goto out_unlock; + } + wait_for_completion_timeout(&mrioc->init_cmds.done, + (MPI3MR_INTADMCMD_TIMEOUT * HZ)); + if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { + ioc_err(mrioc, "create reply queue timed out\n"); + mpi3mr_check_rh_fault_ioc(mrioc, + MPI3MR_RESET_FROM_CREATEREPQ_TIMEOUT); + retval = -1; + goto out_unlock; + } + if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK) + != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, + "CreateRepQ: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n", + (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK), + mrioc->init_cmds.ioc_loginfo); + retval = -1; + goto out_unlock; + } + op_reply_q->qid = reply_qid; + if (midx < mrioc->intr_info_count) + mrioc->intr_info[midx].op_reply_q = op_reply_q; + + (op_reply_q->qtype == MPI3MR_DEFAULT_QUEUE) ? mrioc->default_qcount++ : + mrioc->active_poll_qcount++; + +out_unlock: + mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; + mutex_unlock(&mrioc->init_cmds.mutex); +out: + + return retval; +} + +/** + * mpi3mr_create_op_req_q - create operational request queue + * @mrioc: Adapter instance reference + * @idx: operational request queue index + * @reply_qid: Reply queue ID + * + * Create operatinal request queue by issuing MPI request + * through admin queue. + * + * Return: 0 on success, non-zero on failure. + */ +static int mpi3mr_create_op_req_q(struct mpi3mr_ioc *mrioc, u16 idx, + u16 reply_qid) +{ + struct mpi3_create_request_queue_request create_req; + struct op_req_qinfo *op_req_q = mrioc->req_qinfo + idx; + int retval = 0; + u16 req_qid = 0; + + req_qid = op_req_q->qid; + + if (req_qid) { + retval = -1; + ioc_err(mrioc, "CreateReqQ: called for duplicate qid %d\n", + req_qid); + + return retval; + } + req_qid = idx + 1; + + op_req_q->num_requests = MPI3MR_OP_REQ_Q_QD; + op_req_q->ci = 0; + op_req_q->pi = 0; + op_req_q->reply_qid = reply_qid; + spin_lock_init(&op_req_q->q_lock); + + if (!op_req_q->q_segments) { + retval = mpi3mr_alloc_op_req_q_segments(mrioc, idx); + if (retval) { + mpi3mr_free_op_req_q_segments(mrioc, idx); + goto out; + } + } + + memset(&create_req, 0, sizeof(create_req)); + mutex_lock(&mrioc->init_cmds.mutex); + if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { + retval = -1; + ioc_err(mrioc, "CreateReqQ: Init command is in use\n"); + goto out_unlock; + } + mrioc->init_cmds.state = MPI3MR_CMD_PENDING; + mrioc->init_cmds.is_waiting = 1; + mrioc->init_cmds.callback = NULL; + create_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); + create_req.function = MPI3_FUNCTION_CREATE_REQUEST_QUEUE; + create_req.queue_id = cpu_to_le16(req_qid); + if (mrioc->enable_segqueue) { + create_req.flags = + MPI3_CREATE_REQUEST_QUEUE_FLAGS_SEGMENTED_SEGMENTED; + create_req.base_address = cpu_to_le64( + op_req_q->q_segment_list_dma); + } else + create_req.base_address = cpu_to_le64( + op_req_q->q_segments[0].segment_dma); + create_req.reply_queue_id = cpu_to_le16(reply_qid); + create_req.size = cpu_to_le16(op_req_q->num_requests); + + init_completion(&mrioc->init_cmds.done); + retval = mpi3mr_admin_request_post(mrioc, &create_req, + sizeof(create_req), 1); + if (retval) { + ioc_err(mrioc, "CreateReqQ: Admin Post failed\n"); + goto out_unlock; + } + wait_for_completion_timeout(&mrioc->init_cmds.done, + (MPI3MR_INTADMCMD_TIMEOUT * HZ)); + if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { + ioc_err(mrioc, "create request queue timed out\n"); + mpi3mr_check_rh_fault_ioc(mrioc, + MPI3MR_RESET_FROM_CREATEREQQ_TIMEOUT); + retval = -1; + goto out_unlock; + } + if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK) + != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, + "CreateReqQ: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n", + (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK), + mrioc->init_cmds.ioc_loginfo); + retval = -1; + goto out_unlock; + } + op_req_q->qid = req_qid; + +out_unlock: + mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; + mutex_unlock(&mrioc->init_cmds.mutex); +out: + + return retval; +} + +/** + * mpi3mr_create_op_queues - create operational queue pairs + * @mrioc: Adapter instance reference + * + * Allocate memory for operational queue meta data and call + * create request and reply queue functions. + * + * Return: 0 on success, non-zero on failures. + */ +static int mpi3mr_create_op_queues(struct mpi3mr_ioc *mrioc) +{ + int retval = 0; + u16 num_queues = 0, i = 0, msix_count_op_q = 1; + + num_queues = min_t(int, mrioc->facts.max_op_reply_q, + mrioc->facts.max_op_req_q); + + msix_count_op_q = + mrioc->intr_info_count - mrioc->op_reply_q_offset; + if (!mrioc->num_queues) + mrioc->num_queues = min_t(int, num_queues, msix_count_op_q); + /* + * During reset set the num_queues to the number of queues + * that was set before the reset. + */ + num_queues = mrioc->num_op_reply_q ? + mrioc->num_op_reply_q : mrioc->num_queues; + ioc_info(mrioc, "trying to create %d operational queue pairs\n", + num_queues); + + if (!mrioc->req_qinfo) { + mrioc->req_qinfo = kcalloc(num_queues, + sizeof(struct op_req_qinfo), GFP_KERNEL); + if (!mrioc->req_qinfo) { + retval = -1; + goto out_failed; + } + + mrioc->op_reply_qinfo = kzalloc(sizeof(struct op_reply_qinfo) * + num_queues, GFP_KERNEL); + if (!mrioc->op_reply_qinfo) { + retval = -1; + goto out_failed; + } + } + + if (mrioc->enable_segqueue) + ioc_info(mrioc, + "allocating operational queues through segmented queues\n"); + + for (i = 0; i < num_queues; i++) { + if (mpi3mr_create_op_reply_q(mrioc, i)) { + ioc_err(mrioc, "Cannot create OP RepQ %d\n", i); + break; + } + if (mpi3mr_create_op_req_q(mrioc, i, + mrioc->op_reply_qinfo[i].qid)) { + ioc_err(mrioc, "Cannot create OP ReqQ %d\n", i); + mpi3mr_delete_op_reply_q(mrioc, i); + break; + } + } + + if (i == 0) { + /* Not even one queue is created successfully*/ + retval = -1; + goto out_failed; + } + mrioc->num_op_reply_q = mrioc->num_op_req_q = i; + ioc_info(mrioc, + "successfully created %d operational queue pairs(default/polled) queue = (%d/%d)\n", + mrioc->num_op_reply_q, mrioc->default_qcount, + mrioc->active_poll_qcount); + + return retval; +out_failed: + kfree(mrioc->req_qinfo); + mrioc->req_qinfo = NULL; + + kfree(mrioc->op_reply_qinfo); + mrioc->op_reply_qinfo = NULL; + + return retval; +} + +/** + * mpi3mr_op_request_post - Post request to operational queue + * @mrioc: Adapter reference + * @op_req_q: Operational request queue info + * @req: MPI3 request + * + * Post the MPI3 request into operational request queue and + * inform the controller, if the queue is full return + * appropriate error. + * + * Return: 0 on success, non-zero on failure. + */ +int mpi3mr_op_request_post(struct mpi3mr_ioc *mrioc, + struct op_req_qinfo *op_req_q, u8 *req) +{ + u16 pi = 0, max_entries, reply_qidx = 0, midx; + int retval = 0; + unsigned long flags; + u8 *req_entry; + void *segment_base_addr; + u16 req_sz = mrioc->facts.op_req_sz; + struct segments *segments = op_req_q->q_segments; + + reply_qidx = op_req_q->reply_qid - 1; + + if (mrioc->unrecoverable) + return -EFAULT; + + spin_lock_irqsave(&op_req_q->q_lock, flags); + pi = op_req_q->pi; + max_entries = op_req_q->num_requests; + + if (mpi3mr_check_req_qfull(op_req_q)) { + midx = REPLY_QUEUE_IDX_TO_MSIX_IDX( + reply_qidx, mrioc->op_reply_q_offset); + mpi3mr_process_op_reply_q(mrioc, mrioc->intr_info[midx].op_reply_q); + + if (mpi3mr_check_req_qfull(op_req_q)) { + retval = -EAGAIN; + goto out; + } + } + + if (mrioc->reset_in_progress) { + ioc_err(mrioc, "OpReqQ submit reset in progress\n"); + retval = -EAGAIN; + goto out; + } + + segment_base_addr = segments[pi / op_req_q->segment_qd].segment; + req_entry = (u8 *)segment_base_addr + + ((pi % op_req_q->segment_qd) * req_sz); + + memset(req_entry, 0, req_sz); + memcpy(req_entry, req, MPI3MR_ADMIN_REQ_FRAME_SZ); + + if (++pi == max_entries) + pi = 0; + op_req_q->pi = pi; + +#ifndef CONFIG_PREEMPT_RT + if (atomic_inc_return(&mrioc->op_reply_qinfo[reply_qidx].pend_ios) + > MPI3MR_IRQ_POLL_TRIGGER_IOCOUNT) + mrioc->op_reply_qinfo[reply_qidx].enable_irq_poll = true; +#else + atomic_inc_return(&mrioc->op_reply_qinfo[reply_qidx].pend_ios); +#endif + + writel(op_req_q->pi, + &mrioc->sysif_regs->oper_queue_indexes[reply_qidx].producer_index); + +out: + spin_unlock_irqrestore(&op_req_q->q_lock, flags); + return retval; +} + +/** + * mpi3mr_check_rh_fault_ioc - check reset history and fault + * controller + * @mrioc: Adapter instance reference + * @reason_code: reason code for the fault. + * + * This routine will save snapdump and fault the controller with + * the given reason code if it is not already in the fault or + * not asynchronosuly reset. This will be used to handle + * initilaization time faults/resets/timeout as in those cases + * immediate soft reset invocation is not required. + * + * Return: None. + */ +void mpi3mr_check_rh_fault_ioc(struct mpi3mr_ioc *mrioc, u32 reason_code) +{ + u32 ioc_status, host_diagnostic, timeout; + + if (mrioc->unrecoverable) { + ioc_err(mrioc, "controller is unrecoverable\n"); + return; + } + + if (!pci_device_is_present(mrioc->pdev)) { + mrioc->unrecoverable = 1; + ioc_err(mrioc, "controller is not present\n"); + return; + } + + ioc_status = readl(&mrioc->sysif_regs->ioc_status); + if ((ioc_status & MPI3_SYSIF_IOC_STATUS_RESET_HISTORY) || + (ioc_status & MPI3_SYSIF_IOC_STATUS_FAULT)) { + mpi3mr_print_fault_info(mrioc); + return; + } + mpi3mr_set_diagsave(mrioc); + mpi3mr_issue_reset(mrioc, MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT, + reason_code); + timeout = MPI3_SYSIF_DIAG_SAVE_TIMEOUT * 10; + do { + host_diagnostic = readl(&mrioc->sysif_regs->host_diagnostic); + if (!(host_diagnostic & MPI3_SYSIF_HOST_DIAG_SAVE_IN_PROGRESS)) + break; + msleep(100); + } while (--timeout); +} + +/** + * mpi3mr_sync_timestamp - Issue time stamp sync request + * @mrioc: Adapter reference + * + * Issue IO unit control MPI request to synchornize firmware + * timestamp with host time. + * + * Return: 0 on success, non-zero on failure. + */ +static int mpi3mr_sync_timestamp(struct mpi3mr_ioc *mrioc) +{ + ktime_t current_time; + struct mpi3_iounit_control_request iou_ctrl; + int retval = 0; + + memset(&iou_ctrl, 0, sizeof(iou_ctrl)); + mutex_lock(&mrioc->init_cmds.mutex); + if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { + retval = -1; + ioc_err(mrioc, "Issue IOUCTL time_stamp: command is in use\n"); + mutex_unlock(&mrioc->init_cmds.mutex); + goto out; + } + mrioc->init_cmds.state = MPI3MR_CMD_PENDING; + mrioc->init_cmds.is_waiting = 1; + mrioc->init_cmds.callback = NULL; + iou_ctrl.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); + iou_ctrl.function = MPI3_FUNCTION_IO_UNIT_CONTROL; + iou_ctrl.operation = MPI3_CTRL_OP_UPDATE_TIMESTAMP; + current_time = ktime_get_real(); + iou_ctrl.param64[0] = cpu_to_le64(ktime_to_ms(current_time)); + + init_completion(&mrioc->init_cmds.done); + retval = mpi3mr_admin_request_post(mrioc, &iou_ctrl, + sizeof(iou_ctrl), 0); + if (retval) { + ioc_err(mrioc, "Issue IOUCTL time_stamp: Admin Post failed\n"); + goto out_unlock; + } + + wait_for_completion_timeout(&mrioc->init_cmds.done, + (MPI3MR_INTADMCMD_TIMEOUT * HZ)); + if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { + ioc_err(mrioc, "Issue IOUCTL time_stamp: command timed out\n"); + mrioc->init_cmds.is_waiting = 0; + if (!(mrioc->init_cmds.state & MPI3MR_CMD_RESET)) + mpi3mr_check_rh_fault_ioc(mrioc, + MPI3MR_RESET_FROM_TSU_TIMEOUT); + retval = -1; + goto out_unlock; + } + if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK) + != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, + "Issue IOUCTL time_stamp: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n", + (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK), + mrioc->init_cmds.ioc_loginfo); + retval = -1; + goto out_unlock; + } + +out_unlock: + mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; + mutex_unlock(&mrioc->init_cmds.mutex); + +out: + return retval; +} + +/** + * mpi3mr_print_pkg_ver - display controller fw package version + * @mrioc: Adapter reference + * + * Retrieve firmware package version from the component image + * header of the controller flash and display it. + * + * Return: 0 on success and non-zero on failure. + */ +static int mpi3mr_print_pkg_ver(struct mpi3mr_ioc *mrioc) +{ + struct mpi3_ci_upload_request ci_upload; + int retval = -1; + void *data = NULL; + dma_addr_t data_dma; + struct mpi3_ci_manifest_mpi *manifest; + u32 data_len = sizeof(struct mpi3_ci_manifest_mpi); + u8 sgl_flags = MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST; + + data = dma_alloc_coherent(&mrioc->pdev->dev, data_len, &data_dma, + GFP_KERNEL); + if (!data) + return -ENOMEM; + + memset(&ci_upload, 0, sizeof(ci_upload)); + mutex_lock(&mrioc->init_cmds.mutex); + if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { + ioc_err(mrioc, "sending get package version failed due to command in use\n"); + mutex_unlock(&mrioc->init_cmds.mutex); + goto out; + } + mrioc->init_cmds.state = MPI3MR_CMD_PENDING; + mrioc->init_cmds.is_waiting = 1; + mrioc->init_cmds.callback = NULL; + ci_upload.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); + ci_upload.function = MPI3_FUNCTION_CI_UPLOAD; + ci_upload.msg_flags = MPI3_CI_UPLOAD_MSGFLAGS_LOCATION_PRIMARY; + ci_upload.signature1 = cpu_to_le32(MPI3_IMAGE_HEADER_SIGNATURE1_MANIFEST); + ci_upload.image_offset = cpu_to_le32(MPI3_IMAGE_HEADER_SIZE); + ci_upload.segment_size = cpu_to_le32(data_len); + + mpi3mr_add_sg_single(&ci_upload.sgl, sgl_flags, data_len, + data_dma); + init_completion(&mrioc->init_cmds.done); + retval = mpi3mr_admin_request_post(mrioc, &ci_upload, + sizeof(ci_upload), 1); + if (retval) { + ioc_err(mrioc, "posting get package version failed\n"); + goto out_unlock; + } + wait_for_completion_timeout(&mrioc->init_cmds.done, + (MPI3MR_INTADMCMD_TIMEOUT * HZ)); + if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { + ioc_err(mrioc, "get package version timed out\n"); + mpi3mr_check_rh_fault_ioc(mrioc, + MPI3MR_RESET_FROM_GETPKGVER_TIMEOUT); + retval = -1; + goto out_unlock; + } + if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK) + == MPI3_IOCSTATUS_SUCCESS) { + manifest = (struct mpi3_ci_manifest_mpi *) data; + if (manifest->manifest_type == MPI3_CI_MANIFEST_TYPE_MPI) { + ioc_info(mrioc, + "firmware package version(%d.%d.%d.%d.%05d-%05d)\n", + manifest->package_version.gen_major, + manifest->package_version.gen_minor, + manifest->package_version.phase_major, + manifest->package_version.phase_minor, + manifest->package_version.customer_id, + manifest->package_version.build_num); + } + } + retval = 0; +out_unlock: + mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; + mutex_unlock(&mrioc->init_cmds.mutex); + +out: + if (data) + dma_free_coherent(&mrioc->pdev->dev, data_len, data, + data_dma); + return retval; +} + +/** + * mpi3mr_watchdog_work - watchdog thread to monitor faults + * @work: work struct + * + * Watch dog work periodically executed (1 second interval) to + * monitor firmware fault and to issue periodic timer sync to + * the firmware. + * + * Return: Nothing. + */ +static void mpi3mr_watchdog_work(struct work_struct *work) +{ + struct mpi3mr_ioc *mrioc = + container_of(work, struct mpi3mr_ioc, watchdog_work.work); + unsigned long flags; + enum mpi3mr_iocstate ioc_state; + u32 fault, host_diagnostic, ioc_status; + u32 reset_reason = MPI3MR_RESET_FROM_FAULT_WATCH; + + if (mrioc->reset_in_progress) + return; + + if (!mrioc->unrecoverable && !pci_device_is_present(mrioc->pdev)) { + ioc_err(mrioc, "watchdog could not detect the controller\n"); + mrioc->unrecoverable = 1; + } + + if (mrioc->unrecoverable) { + ioc_err(mrioc, + "flush pending commands for unrecoverable controller\n"); + mpi3mr_flush_cmds_for_unrecovered_controller(mrioc); + return; + } + + if (mrioc->ts_update_counter++ >= MPI3MR_TSUPDATE_INTERVAL) { + mrioc->ts_update_counter = 0; + mpi3mr_sync_timestamp(mrioc); + } + + if ((mrioc->prepare_for_reset) && + ((mrioc->prepare_for_reset_timeout_counter++) >= + MPI3MR_PREPARE_FOR_RESET_TIMEOUT)) { + mpi3mr_soft_reset_handler(mrioc, + MPI3MR_RESET_FROM_CIACTVRST_TIMER, 1); + return; + } + + ioc_status = readl(&mrioc->sysif_regs->ioc_status); + if (ioc_status & MPI3_SYSIF_IOC_STATUS_RESET_HISTORY) { + mpi3mr_soft_reset_handler(mrioc, MPI3MR_RESET_FROM_FIRMWARE, 0); + return; + } + + /*Check for fault state every one second and issue Soft reset*/ + ioc_state = mpi3mr_get_iocstate(mrioc); + if (ioc_state != MRIOC_STATE_FAULT) + goto schedule_work; + + fault = readl(&mrioc->sysif_regs->fault) & MPI3_SYSIF_FAULT_CODE_MASK; + host_diagnostic = readl(&mrioc->sysif_regs->host_diagnostic); + if (host_diagnostic & MPI3_SYSIF_HOST_DIAG_SAVE_IN_PROGRESS) { + if (!mrioc->diagsave_timeout) { + mpi3mr_print_fault_info(mrioc); + ioc_warn(mrioc, "diag save in progress\n"); + } + if ((mrioc->diagsave_timeout++) <= MPI3_SYSIF_DIAG_SAVE_TIMEOUT) + goto schedule_work; + } + + mpi3mr_print_fault_info(mrioc); + mrioc->diagsave_timeout = 0; + + switch (fault) { + case MPI3_SYSIF_FAULT_CODE_COMPLETE_RESET_NEEDED: + case MPI3_SYSIF_FAULT_CODE_POWER_CYCLE_REQUIRED: + ioc_warn(mrioc, + "controller requires system power cycle, marking controller as unrecoverable\n"); + mrioc->unrecoverable = 1; + goto schedule_work; + case MPI3_SYSIF_FAULT_CODE_SOFT_RESET_IN_PROGRESS: + goto schedule_work; + case MPI3_SYSIF_FAULT_CODE_CI_ACTIVATION_RESET: + reset_reason = MPI3MR_RESET_FROM_CIACTIV_FAULT; + break; + default: + break; + } + mpi3mr_soft_reset_handler(mrioc, reset_reason, 0); + return; + +schedule_work: + spin_lock_irqsave(&mrioc->watchdog_lock, flags); + if (mrioc->watchdog_work_q) + queue_delayed_work(mrioc->watchdog_work_q, + &mrioc->watchdog_work, + msecs_to_jiffies(MPI3MR_WATCHDOG_INTERVAL)); + spin_unlock_irqrestore(&mrioc->watchdog_lock, flags); + return; +} + +/** + * mpi3mr_start_watchdog - Start watchdog + * @mrioc: Adapter instance reference + * + * Create and start the watchdog thread to monitor controller + * faults. + * + * Return: Nothing. + */ +void mpi3mr_start_watchdog(struct mpi3mr_ioc *mrioc) +{ + if (mrioc->watchdog_work_q) + return; + + INIT_DELAYED_WORK(&mrioc->watchdog_work, mpi3mr_watchdog_work); + snprintf(mrioc->watchdog_work_q_name, + sizeof(mrioc->watchdog_work_q_name), "watchdog_%s%d", mrioc->name, + mrioc->id); + mrioc->watchdog_work_q = + create_singlethread_workqueue(mrioc->watchdog_work_q_name); + if (!mrioc->watchdog_work_q) { + ioc_err(mrioc, "%s: failed (line=%d)\n", __func__, __LINE__); + return; + } + + if (mrioc->watchdog_work_q) + queue_delayed_work(mrioc->watchdog_work_q, + &mrioc->watchdog_work, + msecs_to_jiffies(MPI3MR_WATCHDOG_INTERVAL)); +} + +/** + * mpi3mr_stop_watchdog - Stop watchdog + * @mrioc: Adapter instance reference + * + * Stop the watchdog thread created to monitor controller + * faults. + * + * Return: Nothing. + */ +void mpi3mr_stop_watchdog(struct mpi3mr_ioc *mrioc) +{ + unsigned long flags; + struct workqueue_struct *wq; + + spin_lock_irqsave(&mrioc->watchdog_lock, flags); + wq = mrioc->watchdog_work_q; + mrioc->watchdog_work_q = NULL; + spin_unlock_irqrestore(&mrioc->watchdog_lock, flags); + if (wq) { + if (!cancel_delayed_work_sync(&mrioc->watchdog_work)) + flush_workqueue(wq); + destroy_workqueue(wq); + } +} + +/** + * mpi3mr_setup_admin_qpair - Setup admin queue pair + * @mrioc: Adapter instance reference + * + * Allocate memory for admin queue pair if required and register + * the admin queue with the controller. + * + * Return: 0 on success, non-zero on failures. + */ +static int mpi3mr_setup_admin_qpair(struct mpi3mr_ioc *mrioc) +{ + int retval = 0; + u32 num_admin_entries = 0; + + mrioc->admin_req_q_sz = MPI3MR_ADMIN_REQ_Q_SIZE; + mrioc->num_admin_req = mrioc->admin_req_q_sz / + MPI3MR_ADMIN_REQ_FRAME_SZ; + mrioc->admin_req_ci = mrioc->admin_req_pi = 0; + + mrioc->admin_reply_q_sz = MPI3MR_ADMIN_REPLY_Q_SIZE; + mrioc->num_admin_replies = mrioc->admin_reply_q_sz / + MPI3MR_ADMIN_REPLY_FRAME_SZ; + mrioc->admin_reply_ci = 0; + mrioc->admin_reply_ephase = 1; + atomic_set(&mrioc->admin_reply_q_in_use, 0); + + if (!mrioc->admin_req_base) { + mrioc->admin_req_base = dma_alloc_coherent(&mrioc->pdev->dev, + mrioc->admin_req_q_sz, &mrioc->admin_req_dma, GFP_KERNEL); + + if (!mrioc->admin_req_base) { + retval = -1; + goto out_failed; + } + + mrioc->admin_reply_base = dma_alloc_coherent(&mrioc->pdev->dev, + mrioc->admin_reply_q_sz, &mrioc->admin_reply_dma, + GFP_KERNEL); + + if (!mrioc->admin_reply_base) { + retval = -1; + goto out_failed; + } + } + + num_admin_entries = (mrioc->num_admin_replies << 16) | + (mrioc->num_admin_req); + writel(num_admin_entries, &mrioc->sysif_regs->admin_queue_num_entries); + mpi3mr_writeq(mrioc->admin_req_dma, + &mrioc->sysif_regs->admin_request_queue_address); + mpi3mr_writeq(mrioc->admin_reply_dma, + &mrioc->sysif_regs->admin_reply_queue_address); + writel(mrioc->admin_req_pi, &mrioc->sysif_regs->admin_request_queue_pi); + writel(mrioc->admin_reply_ci, &mrioc->sysif_regs->admin_reply_queue_ci); + return retval; + +out_failed: + + if (mrioc->admin_reply_base) { + dma_free_coherent(&mrioc->pdev->dev, mrioc->admin_reply_q_sz, + mrioc->admin_reply_base, mrioc->admin_reply_dma); + mrioc->admin_reply_base = NULL; + } + if (mrioc->admin_req_base) { + dma_free_coherent(&mrioc->pdev->dev, mrioc->admin_req_q_sz, + mrioc->admin_req_base, mrioc->admin_req_dma); + mrioc->admin_req_base = NULL; + } + return retval; +} + +/** + * mpi3mr_issue_iocfacts - Send IOC Facts + * @mrioc: Adapter instance reference + * @facts_data: Cached IOC facts data + * + * Issue IOC Facts MPI request through admin queue and wait for + * the completion of it or time out. + * + * Return: 0 on success, non-zero on failures. + */ +static int mpi3mr_issue_iocfacts(struct mpi3mr_ioc *mrioc, + struct mpi3_ioc_facts_data *facts_data) +{ + struct mpi3_ioc_facts_request iocfacts_req; + void *data = NULL; + dma_addr_t data_dma; + u32 data_len = sizeof(*facts_data); + int retval = 0; + u8 sgl_flags = MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST; + + data = dma_alloc_coherent(&mrioc->pdev->dev, data_len, &data_dma, + GFP_KERNEL); + + if (!data) { + retval = -1; + goto out; + } + + memset(&iocfacts_req, 0, sizeof(iocfacts_req)); + mutex_lock(&mrioc->init_cmds.mutex); + if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { + retval = -1; + ioc_err(mrioc, "Issue IOCFacts: Init command is in use\n"); + mutex_unlock(&mrioc->init_cmds.mutex); + goto out; + } + mrioc->init_cmds.state = MPI3MR_CMD_PENDING; + mrioc->init_cmds.is_waiting = 1; + mrioc->init_cmds.callback = NULL; + iocfacts_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); + iocfacts_req.function = MPI3_FUNCTION_IOC_FACTS; + + mpi3mr_add_sg_single(&iocfacts_req.sgl, sgl_flags, data_len, + data_dma); + + init_completion(&mrioc->init_cmds.done); + retval = mpi3mr_admin_request_post(mrioc, &iocfacts_req, + sizeof(iocfacts_req), 1); + if (retval) { + ioc_err(mrioc, "Issue IOCFacts: Admin Post failed\n"); + goto out_unlock; + } + wait_for_completion_timeout(&mrioc->init_cmds.done, + (MPI3MR_INTADMCMD_TIMEOUT * HZ)); + if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { + ioc_err(mrioc, "ioc_facts timed out\n"); + mpi3mr_check_rh_fault_ioc(mrioc, + MPI3MR_RESET_FROM_IOCFACTS_TIMEOUT); + retval = -1; + goto out_unlock; + } + if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK) + != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, + "Issue IOCFacts: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n", + (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK), + mrioc->init_cmds.ioc_loginfo); + retval = -1; + goto out_unlock; + } + memcpy(facts_data, (u8 *)data, data_len); + mpi3mr_process_factsdata(mrioc, facts_data); +out_unlock: + mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; + mutex_unlock(&mrioc->init_cmds.mutex); + +out: + if (data) + dma_free_coherent(&mrioc->pdev->dev, data_len, data, data_dma); + + return retval; +} + +/** + * mpi3mr_check_reset_dma_mask - Process IOC facts data + * @mrioc: Adapter instance reference + * + * Check whether the new DMA mask requested through IOCFacts by + * firmware needs to be set, if so set it . + * + * Return: 0 on success, non-zero on failure. + */ +static inline int mpi3mr_check_reset_dma_mask(struct mpi3mr_ioc *mrioc) +{ + struct pci_dev *pdev = mrioc->pdev; + int r; + u64 facts_dma_mask = DMA_BIT_MASK(mrioc->facts.dma_mask); + + if (!mrioc->facts.dma_mask || (mrioc->dma_mask <= facts_dma_mask)) + return 0; + + ioc_info(mrioc, "Changing DMA mask from 0x%016llx to 0x%016llx\n", + mrioc->dma_mask, facts_dma_mask); + + r = dma_set_mask_and_coherent(&pdev->dev, facts_dma_mask); + if (r) { + ioc_err(mrioc, "Setting DMA mask to 0x%016llx failed: %d\n", + facts_dma_mask, r); + return r; + } + mrioc->dma_mask = facts_dma_mask; + return r; +} + +/** + * mpi3mr_process_factsdata - Process IOC facts data + * @mrioc: Adapter instance reference + * @facts_data: Cached IOC facts data + * + * Convert IOC facts data into cpu endianness and cache it in + * the driver . + * + * Return: Nothing. + */ +static void mpi3mr_process_factsdata(struct mpi3mr_ioc *mrioc, + struct mpi3_ioc_facts_data *facts_data) +{ + u32 ioc_config, req_sz, facts_flags; + + if ((le16_to_cpu(facts_data->ioc_facts_data_length)) != + (sizeof(*facts_data) / 4)) { + ioc_warn(mrioc, + "IOCFactsdata length mismatch driver_sz(%zu) firmware_sz(%d)\n", + sizeof(*facts_data), + le16_to_cpu(facts_data->ioc_facts_data_length) * 4); + } + + ioc_config = readl(&mrioc->sysif_regs->ioc_configuration); + req_sz = 1 << ((ioc_config & MPI3_SYSIF_IOC_CONFIG_OPER_REQ_ENT_SZ) >> + MPI3_SYSIF_IOC_CONFIG_OPER_REQ_ENT_SZ_SHIFT); + if (le16_to_cpu(facts_data->ioc_request_frame_size) != (req_sz / 4)) { + ioc_err(mrioc, + "IOCFacts data reqFrameSize mismatch hw_size(%d) firmware_sz(%d)\n", + req_sz / 4, le16_to_cpu(facts_data->ioc_request_frame_size)); + } + + memset(&mrioc->facts, 0, sizeof(mrioc->facts)); + + facts_flags = le32_to_cpu(facts_data->flags); + mrioc->facts.op_req_sz = req_sz; + mrioc->op_reply_desc_sz = 1 << ((ioc_config & + MPI3_SYSIF_IOC_CONFIG_OPER_RPY_ENT_SZ) >> + MPI3_SYSIF_IOC_CONFIG_OPER_RPY_ENT_SZ_SHIFT); + + mrioc->facts.ioc_num = facts_data->ioc_number; + mrioc->facts.who_init = facts_data->who_init; + mrioc->facts.max_msix_vectors = le16_to_cpu(facts_data->max_msix_vectors); + mrioc->facts.personality = (facts_flags & + MPI3_IOCFACTS_FLAGS_PERSONALITY_MASK); + mrioc->facts.dma_mask = (facts_flags & + MPI3_IOCFACTS_FLAGS_DMA_ADDRESS_WIDTH_MASK) >> + MPI3_IOCFACTS_FLAGS_DMA_ADDRESS_WIDTH_SHIFT; + mrioc->facts.protocol_flags = facts_data->protocol_flags; + mrioc->facts.mpi_version = le32_to_cpu(facts_data->mpi_version.word); + mrioc->facts.max_reqs = le16_to_cpu(facts_data->max_outstanding_requests); + mrioc->facts.product_id = le16_to_cpu(facts_data->product_id); + mrioc->facts.reply_sz = le16_to_cpu(facts_data->reply_frame_size) * 4; + mrioc->facts.exceptions = le16_to_cpu(facts_data->ioc_exceptions); + mrioc->facts.max_perids = le16_to_cpu(facts_data->max_persistent_id); + mrioc->facts.max_vds = le16_to_cpu(facts_data->max_vds); + mrioc->facts.max_hpds = le16_to_cpu(facts_data->max_host_pds); + mrioc->facts.max_advhpds = le16_to_cpu(facts_data->max_adv_host_pds); + mrioc->facts.max_raid_pds = le16_to_cpu(facts_data->max_raid_pds); + mrioc->facts.max_nvme = le16_to_cpu(facts_data->max_nvme); + mrioc->facts.max_pcie_switches = + le16_to_cpu(facts_data->max_pcie_switches); + mrioc->facts.max_sasexpanders = + le16_to_cpu(facts_data->max_sas_expanders); + mrioc->facts.max_data_length = le16_to_cpu(facts_data->max_data_length); + mrioc->facts.max_sasinitiators = + le16_to_cpu(facts_data->max_sas_initiators); + mrioc->facts.max_enclosures = le16_to_cpu(facts_data->max_enclosures); + mrioc->facts.min_devhandle = le16_to_cpu(facts_data->min_dev_handle); + mrioc->facts.max_devhandle = le16_to_cpu(facts_data->max_dev_handle); + mrioc->facts.max_op_req_q = + le16_to_cpu(facts_data->max_operational_request_queues); + mrioc->facts.max_op_reply_q = + le16_to_cpu(facts_data->max_operational_reply_queues); + mrioc->facts.ioc_capabilities = + le32_to_cpu(facts_data->ioc_capabilities); + mrioc->facts.fw_ver.build_num = + le16_to_cpu(facts_data->fw_version.build_num); + mrioc->facts.fw_ver.cust_id = + le16_to_cpu(facts_data->fw_version.customer_id); + mrioc->facts.fw_ver.ph_minor = facts_data->fw_version.phase_minor; + mrioc->facts.fw_ver.ph_major = facts_data->fw_version.phase_major; + mrioc->facts.fw_ver.gen_minor = facts_data->fw_version.gen_minor; + mrioc->facts.fw_ver.gen_major = facts_data->fw_version.gen_major; + mrioc->msix_count = min_t(int, mrioc->msix_count, + mrioc->facts.max_msix_vectors); + mrioc->facts.sge_mod_mask = facts_data->sge_modifier_mask; + mrioc->facts.sge_mod_value = facts_data->sge_modifier_value; + mrioc->facts.sge_mod_shift = facts_data->sge_modifier_shift; + mrioc->facts.shutdown_timeout = + le16_to_cpu(facts_data->shutdown_timeout); + + mrioc->facts.max_dev_per_tg = + facts_data->max_devices_per_throttle_group; + mrioc->facts.io_throttle_data_length = + le16_to_cpu(facts_data->io_throttle_data_length); + mrioc->facts.max_io_throttle_group = + le16_to_cpu(facts_data->max_io_throttle_group); + mrioc->facts.io_throttle_low = le16_to_cpu(facts_data->io_throttle_low); + mrioc->facts.io_throttle_high = + le16_to_cpu(facts_data->io_throttle_high); + + if (mrioc->facts.max_data_length == + MPI3_IOCFACTS_MAX_DATA_LENGTH_NOT_REPORTED) + mrioc->facts.max_data_length = MPI3MR_DEFAULT_MAX_IO_SIZE; + else + mrioc->facts.max_data_length *= MPI3MR_PAGE_SIZE_4K; + /* Store in 512b block count */ + if (mrioc->facts.io_throttle_data_length) + mrioc->io_throttle_data_length = + (mrioc->facts.io_throttle_data_length * 2 * 4); + else + /* set the length to 1MB + 1K to disable throttle */ + mrioc->io_throttle_data_length = (mrioc->facts.max_data_length / 512) + 2; + + mrioc->io_throttle_high = (mrioc->facts.io_throttle_high * 2 * 1024); + mrioc->io_throttle_low = (mrioc->facts.io_throttle_low * 2 * 1024); + + ioc_info(mrioc, "ioc_num(%d), maxopQ(%d), maxopRepQ(%d), maxdh(%d),", + mrioc->facts.ioc_num, mrioc->facts.max_op_req_q, + mrioc->facts.max_op_reply_q, mrioc->facts.max_devhandle); + ioc_info(mrioc, + "maxreqs(%d), mindh(%d) maxvectors(%d) maxperids(%d)\n", + mrioc->facts.max_reqs, mrioc->facts.min_devhandle, + mrioc->facts.max_msix_vectors, mrioc->facts.max_perids); + ioc_info(mrioc, "SGEModMask 0x%x SGEModVal 0x%x SGEModShift 0x%x ", + mrioc->facts.sge_mod_mask, mrioc->facts.sge_mod_value, + mrioc->facts.sge_mod_shift); + ioc_info(mrioc, "DMA mask %d InitialPE status 0x%x max_data_len (%d)\n", + mrioc->facts.dma_mask, (facts_flags & + MPI3_IOCFACTS_FLAGS_INITIAL_PORT_ENABLE_MASK), mrioc->facts.max_data_length); + ioc_info(mrioc, + "max_dev_per_throttle_group(%d), max_throttle_groups(%d)\n", + mrioc->facts.max_dev_per_tg, mrioc->facts.max_io_throttle_group); + ioc_info(mrioc, + "io_throttle_data_len(%dKiB), io_throttle_high(%dMiB), io_throttle_low(%dMiB)\n", + mrioc->facts.io_throttle_data_length * 4, + mrioc->facts.io_throttle_high, mrioc->facts.io_throttle_low); +} + +/** + * mpi3mr_alloc_reply_sense_bufs - Send IOC Init + * @mrioc: Adapter instance reference + * + * Allocate and initialize the reply free buffers, sense + * buffers, reply free queue and sense buffer queue. + * + * Return: 0 on success, non-zero on failures. + */ +static int mpi3mr_alloc_reply_sense_bufs(struct mpi3mr_ioc *mrioc) +{ + int retval = 0; + u32 sz, i; + + if (mrioc->init_cmds.reply) + return retval; + + mrioc->init_cmds.reply = kzalloc(mrioc->reply_sz, GFP_KERNEL); + if (!mrioc->init_cmds.reply) + goto out_failed; + + mrioc->bsg_cmds.reply = kzalloc(mrioc->reply_sz, GFP_KERNEL); + if (!mrioc->bsg_cmds.reply) + goto out_failed; + + mrioc->transport_cmds.reply = kzalloc(mrioc->reply_sz, GFP_KERNEL); + if (!mrioc->transport_cmds.reply) + goto out_failed; + + for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++) { + mrioc->dev_rmhs_cmds[i].reply = kzalloc(mrioc->reply_sz, + GFP_KERNEL); + if (!mrioc->dev_rmhs_cmds[i].reply) + goto out_failed; + } + + for (i = 0; i < MPI3MR_NUM_EVTACKCMD; i++) { + mrioc->evtack_cmds[i].reply = kzalloc(mrioc->reply_sz, + GFP_KERNEL); + if (!mrioc->evtack_cmds[i].reply) + goto out_failed; + } + + mrioc->host_tm_cmds.reply = kzalloc(mrioc->reply_sz, GFP_KERNEL); + if (!mrioc->host_tm_cmds.reply) + goto out_failed; + + mrioc->pel_cmds.reply = kzalloc(mrioc->reply_sz, GFP_KERNEL); + if (!mrioc->pel_cmds.reply) + goto out_failed; + + mrioc->pel_abort_cmd.reply = kzalloc(mrioc->reply_sz, GFP_KERNEL); + if (!mrioc->pel_abort_cmd.reply) + goto out_failed; + + mrioc->dev_handle_bitmap_bits = mrioc->facts.max_devhandle; + mrioc->removepend_bitmap = bitmap_zalloc(mrioc->dev_handle_bitmap_bits, + GFP_KERNEL); + if (!mrioc->removepend_bitmap) + goto out_failed; + + mrioc->devrem_bitmap = bitmap_zalloc(MPI3MR_NUM_DEVRMCMD, GFP_KERNEL); + if (!mrioc->devrem_bitmap) + goto out_failed; + + mrioc->evtack_cmds_bitmap = bitmap_zalloc(MPI3MR_NUM_EVTACKCMD, + GFP_KERNEL); + if (!mrioc->evtack_cmds_bitmap) + goto out_failed; + + mrioc->num_reply_bufs = mrioc->facts.max_reqs + MPI3MR_NUM_EVT_REPLIES; + mrioc->reply_free_qsz = mrioc->num_reply_bufs + 1; + mrioc->num_sense_bufs = mrioc->facts.max_reqs / MPI3MR_SENSEBUF_FACTOR; + mrioc->sense_buf_q_sz = mrioc->num_sense_bufs + 1; + + /* reply buffer pool, 16 byte align */ + sz = mrioc->num_reply_bufs * mrioc->reply_sz; + mrioc->reply_buf_pool = dma_pool_create("reply_buf pool", + &mrioc->pdev->dev, sz, 16, 0); + if (!mrioc->reply_buf_pool) { + ioc_err(mrioc, "reply buf pool: dma_pool_create failed\n"); + goto out_failed; + } + + mrioc->reply_buf = dma_pool_zalloc(mrioc->reply_buf_pool, GFP_KERNEL, + &mrioc->reply_buf_dma); + if (!mrioc->reply_buf) + goto out_failed; + + mrioc->reply_buf_dma_max_address = mrioc->reply_buf_dma + sz; + + /* reply free queue, 8 byte align */ + sz = mrioc->reply_free_qsz * 8; + mrioc->reply_free_q_pool = dma_pool_create("reply_free_q pool", + &mrioc->pdev->dev, sz, 8, 0); + if (!mrioc->reply_free_q_pool) { + ioc_err(mrioc, "reply_free_q pool: dma_pool_create failed\n"); + goto out_failed; + } + mrioc->reply_free_q = dma_pool_zalloc(mrioc->reply_free_q_pool, + GFP_KERNEL, &mrioc->reply_free_q_dma); + if (!mrioc->reply_free_q) + goto out_failed; + + /* sense buffer pool, 4 byte align */ + sz = mrioc->num_sense_bufs * MPI3MR_SENSE_BUF_SZ; + mrioc->sense_buf_pool = dma_pool_create("sense_buf pool", + &mrioc->pdev->dev, sz, 4, 0); + if (!mrioc->sense_buf_pool) { + ioc_err(mrioc, "sense_buf pool: dma_pool_create failed\n"); + goto out_failed; + } + mrioc->sense_buf = dma_pool_zalloc(mrioc->sense_buf_pool, GFP_KERNEL, + &mrioc->sense_buf_dma); + if (!mrioc->sense_buf) + goto out_failed; + + /* sense buffer queue, 8 byte align */ + sz = mrioc->sense_buf_q_sz * 8; + mrioc->sense_buf_q_pool = dma_pool_create("sense_buf_q pool", + &mrioc->pdev->dev, sz, 8, 0); + if (!mrioc->sense_buf_q_pool) { + ioc_err(mrioc, "sense_buf_q pool: dma_pool_create failed\n"); + goto out_failed; + } + mrioc->sense_buf_q = dma_pool_zalloc(mrioc->sense_buf_q_pool, + GFP_KERNEL, &mrioc->sense_buf_q_dma); + if (!mrioc->sense_buf_q) + goto out_failed; + + return retval; + +out_failed: + retval = -1; + return retval; +} + +/** + * mpimr_initialize_reply_sbuf_queues - initialize reply sense + * buffers + * @mrioc: Adapter instance reference + * + * Helper function to initialize reply and sense buffers along + * with some debug prints. + * + * Return: None. + */ +static void mpimr_initialize_reply_sbuf_queues(struct mpi3mr_ioc *mrioc) +{ + u32 sz, i; + dma_addr_t phy_addr; + + sz = mrioc->num_reply_bufs * mrioc->reply_sz; + ioc_info(mrioc, + "reply buf pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB), reply_dma(0x%llx)\n", + mrioc->reply_buf, mrioc->num_reply_bufs, mrioc->reply_sz, + (sz / 1024), (unsigned long long)mrioc->reply_buf_dma); + sz = mrioc->reply_free_qsz * 8; + ioc_info(mrioc, + "reply_free_q pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB), reply_dma(0x%llx)\n", + mrioc->reply_free_q, mrioc->reply_free_qsz, 8, (sz / 1024), + (unsigned long long)mrioc->reply_free_q_dma); + sz = mrioc->num_sense_bufs * MPI3MR_SENSE_BUF_SZ; + ioc_info(mrioc, + "sense_buf pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB), sense_dma(0x%llx)\n", + mrioc->sense_buf, mrioc->num_sense_bufs, MPI3MR_SENSE_BUF_SZ, + (sz / 1024), (unsigned long long)mrioc->sense_buf_dma); + sz = mrioc->sense_buf_q_sz * 8; + ioc_info(mrioc, + "sense_buf_q pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB), sense_dma(0x%llx)\n", + mrioc->sense_buf_q, mrioc->sense_buf_q_sz, 8, (sz / 1024), + (unsigned long long)mrioc->sense_buf_q_dma); + + /* initialize Reply buffer Queue */ + for (i = 0, phy_addr = mrioc->reply_buf_dma; + i < mrioc->num_reply_bufs; i++, phy_addr += mrioc->reply_sz) + mrioc->reply_free_q[i] = cpu_to_le64(phy_addr); + mrioc->reply_free_q[i] = cpu_to_le64(0); + + /* initialize Sense Buffer Queue */ + for (i = 0, phy_addr = mrioc->sense_buf_dma; + i < mrioc->num_sense_bufs; i++, phy_addr += MPI3MR_SENSE_BUF_SZ) + mrioc->sense_buf_q[i] = cpu_to_le64(phy_addr); + mrioc->sense_buf_q[i] = cpu_to_le64(0); +} + +/** + * mpi3mr_issue_iocinit - Send IOC Init + * @mrioc: Adapter instance reference + * + * Issue IOC Init MPI request through admin queue and wait for + * the completion of it or time out. + * + * Return: 0 on success, non-zero on failures. + */ +static int mpi3mr_issue_iocinit(struct mpi3mr_ioc *mrioc) +{ + struct mpi3_ioc_init_request iocinit_req; + struct mpi3_driver_info_layout *drv_info; + dma_addr_t data_dma; + u32 data_len = sizeof(*drv_info); + int retval = 0; + ktime_t current_time; + + drv_info = dma_alloc_coherent(&mrioc->pdev->dev, data_len, &data_dma, + GFP_KERNEL); + if (!drv_info) { + retval = -1; + goto out; + } + mpimr_initialize_reply_sbuf_queues(mrioc); + + drv_info->information_length = cpu_to_le32(data_len); + strscpy(drv_info->driver_signature, "Broadcom", sizeof(drv_info->driver_signature)); + strscpy(drv_info->os_name, utsname()->sysname, sizeof(drv_info->os_name)); + strscpy(drv_info->os_version, utsname()->release, sizeof(drv_info->os_version)); + strscpy(drv_info->driver_name, MPI3MR_DRIVER_NAME, sizeof(drv_info->driver_name)); + strscpy(drv_info->driver_version, MPI3MR_DRIVER_VERSION, sizeof(drv_info->driver_version)); + strscpy(drv_info->driver_release_date, MPI3MR_DRIVER_RELDATE, + sizeof(drv_info->driver_release_date)); + drv_info->driver_capabilities = 0; + memcpy((u8 *)&mrioc->driver_info, (u8 *)drv_info, + sizeof(mrioc->driver_info)); + + memset(&iocinit_req, 0, sizeof(iocinit_req)); + mutex_lock(&mrioc->init_cmds.mutex); + if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { + retval = -1; + ioc_err(mrioc, "Issue IOCInit: Init command is in use\n"); + mutex_unlock(&mrioc->init_cmds.mutex); + goto out; + } + mrioc->init_cmds.state = MPI3MR_CMD_PENDING; + mrioc->init_cmds.is_waiting = 1; + mrioc->init_cmds.callback = NULL; + iocinit_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); + iocinit_req.function = MPI3_FUNCTION_IOC_INIT; + iocinit_req.mpi_version.mpi3_version.dev = MPI3_VERSION_DEV; + iocinit_req.mpi_version.mpi3_version.unit = MPI3_VERSION_UNIT; + iocinit_req.mpi_version.mpi3_version.major = MPI3_VERSION_MAJOR; + iocinit_req.mpi_version.mpi3_version.minor = MPI3_VERSION_MINOR; + iocinit_req.who_init = MPI3_WHOINIT_HOST_DRIVER; + iocinit_req.reply_free_queue_depth = cpu_to_le16(mrioc->reply_free_qsz); + iocinit_req.reply_free_queue_address = + cpu_to_le64(mrioc->reply_free_q_dma); + iocinit_req.sense_buffer_length = cpu_to_le16(MPI3MR_SENSE_BUF_SZ); + iocinit_req.sense_buffer_free_queue_depth = + cpu_to_le16(mrioc->sense_buf_q_sz); + iocinit_req.sense_buffer_free_queue_address = + cpu_to_le64(mrioc->sense_buf_q_dma); + iocinit_req.driver_information_address = cpu_to_le64(data_dma); + + current_time = ktime_get_real(); + iocinit_req.time_stamp = cpu_to_le64(ktime_to_ms(current_time)); + + init_completion(&mrioc->init_cmds.done); + retval = mpi3mr_admin_request_post(mrioc, &iocinit_req, + sizeof(iocinit_req), 1); + if (retval) { + ioc_err(mrioc, "Issue IOCInit: Admin Post failed\n"); + goto out_unlock; + } + wait_for_completion_timeout(&mrioc->init_cmds.done, + (MPI3MR_INTADMCMD_TIMEOUT * HZ)); + if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { + mpi3mr_check_rh_fault_ioc(mrioc, + MPI3MR_RESET_FROM_IOCINIT_TIMEOUT); + ioc_err(mrioc, "ioc_init timed out\n"); + retval = -1; + goto out_unlock; + } + if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK) + != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, + "Issue IOCInit: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n", + (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK), + mrioc->init_cmds.ioc_loginfo); + retval = -1; + goto out_unlock; + } + + mrioc->reply_free_queue_host_index = mrioc->num_reply_bufs; + writel(mrioc->reply_free_queue_host_index, + &mrioc->sysif_regs->reply_free_host_index); + + mrioc->sbq_host_index = mrioc->num_sense_bufs; + writel(mrioc->sbq_host_index, + &mrioc->sysif_regs->sense_buffer_free_host_index); +out_unlock: + mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; + mutex_unlock(&mrioc->init_cmds.mutex); + +out: + if (drv_info) + dma_free_coherent(&mrioc->pdev->dev, data_len, drv_info, + data_dma); + + return retval; +} + +/** + * mpi3mr_unmask_events - Unmask events in event mask bitmap + * @mrioc: Adapter instance reference + * @event: MPI event ID + * + * Un mask the specific event by resetting the event_mask + * bitmap. + * + * Return: 0 on success, non-zero on failures. + */ +static void mpi3mr_unmask_events(struct mpi3mr_ioc *mrioc, u16 event) +{ + u32 desired_event; + u8 word; + + if (event >= 128) + return; + + desired_event = (1 << (event % 32)); + word = event / 32; + + mrioc->event_masks[word] &= ~desired_event; +} + +/** + * mpi3mr_issue_event_notification - Send event notification + * @mrioc: Adapter instance reference + * + * Issue event notification MPI request through admin queue and + * wait for the completion of it or time out. + * + * Return: 0 on success, non-zero on failures. + */ +static int mpi3mr_issue_event_notification(struct mpi3mr_ioc *mrioc) +{ + struct mpi3_event_notification_request evtnotify_req; + int retval = 0; + u8 i; + + memset(&evtnotify_req, 0, sizeof(evtnotify_req)); + mutex_lock(&mrioc->init_cmds.mutex); + if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { + retval = -1; + ioc_err(mrioc, "Issue EvtNotify: Init command is in use\n"); + mutex_unlock(&mrioc->init_cmds.mutex); + goto out; + } + mrioc->init_cmds.state = MPI3MR_CMD_PENDING; + mrioc->init_cmds.is_waiting = 1; + mrioc->init_cmds.callback = NULL; + evtnotify_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); + evtnotify_req.function = MPI3_FUNCTION_EVENT_NOTIFICATION; + for (i = 0; i < MPI3_EVENT_NOTIFY_EVENTMASK_WORDS; i++) + evtnotify_req.event_masks[i] = + cpu_to_le32(mrioc->event_masks[i]); + init_completion(&mrioc->init_cmds.done); + retval = mpi3mr_admin_request_post(mrioc, &evtnotify_req, + sizeof(evtnotify_req), 1); + if (retval) { + ioc_err(mrioc, "Issue EvtNotify: Admin Post failed\n"); + goto out_unlock; + } + wait_for_completion_timeout(&mrioc->init_cmds.done, + (MPI3MR_INTADMCMD_TIMEOUT * HZ)); + if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { + ioc_err(mrioc, "event notification timed out\n"); + mpi3mr_check_rh_fault_ioc(mrioc, + MPI3MR_RESET_FROM_EVTNOTIFY_TIMEOUT); + retval = -1; + goto out_unlock; + } + if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK) + != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, + "Issue EvtNotify: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n", + (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK), + mrioc->init_cmds.ioc_loginfo); + retval = -1; + goto out_unlock; + } + +out_unlock: + mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; + mutex_unlock(&mrioc->init_cmds.mutex); +out: + return retval; +} + +/** + * mpi3mr_process_event_ack - Process event acknowledgment + * @mrioc: Adapter instance reference + * @event: MPI3 event ID + * @event_ctx: event context + * + * Send event acknowledgment through admin queue and wait for + * it to complete. + * + * Return: 0 on success, non-zero on failures. + */ +int mpi3mr_process_event_ack(struct mpi3mr_ioc *mrioc, u8 event, + u32 event_ctx) +{ + struct mpi3_event_ack_request evtack_req; + int retval = 0; + + memset(&evtack_req, 0, sizeof(evtack_req)); + mutex_lock(&mrioc->init_cmds.mutex); + if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { + retval = -1; + ioc_err(mrioc, "Send EvtAck: Init command is in use\n"); + mutex_unlock(&mrioc->init_cmds.mutex); + goto out; + } + mrioc->init_cmds.state = MPI3MR_CMD_PENDING; + mrioc->init_cmds.is_waiting = 1; + mrioc->init_cmds.callback = NULL; + evtack_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); + evtack_req.function = MPI3_FUNCTION_EVENT_ACK; + evtack_req.event = event; + evtack_req.event_context = cpu_to_le32(event_ctx); + + init_completion(&mrioc->init_cmds.done); + retval = mpi3mr_admin_request_post(mrioc, &evtack_req, + sizeof(evtack_req), 1); + if (retval) { + ioc_err(mrioc, "Send EvtAck: Admin Post failed\n"); + goto out_unlock; + } + wait_for_completion_timeout(&mrioc->init_cmds.done, + (MPI3MR_INTADMCMD_TIMEOUT * HZ)); + if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { + ioc_err(mrioc, "Issue EvtNotify: command timed out\n"); + if (!(mrioc->init_cmds.state & MPI3MR_CMD_RESET)) + mpi3mr_check_rh_fault_ioc(mrioc, + MPI3MR_RESET_FROM_EVTACK_TIMEOUT); + retval = -1; + goto out_unlock; + } + if ((mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK) + != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, + "Send EvtAck: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n", + (mrioc->init_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK), + mrioc->init_cmds.ioc_loginfo); + retval = -1; + goto out_unlock; + } + +out_unlock: + mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; + mutex_unlock(&mrioc->init_cmds.mutex); +out: + return retval; +} + +/** + * mpi3mr_alloc_chain_bufs - Allocate chain buffers + * @mrioc: Adapter instance reference + * + * Allocate chain buffers and set a bitmap to indicate free + * chain buffers. Chain buffers are used to pass the SGE + * information along with MPI3 SCSI IO requests for host I/O. + * + * Return: 0 on success, non-zero on failure + */ +static int mpi3mr_alloc_chain_bufs(struct mpi3mr_ioc *mrioc) +{ + int retval = 0; + u32 sz, i; + u16 num_chains; + + if (mrioc->chain_sgl_list) + return retval; + + num_chains = mrioc->max_host_ios / MPI3MR_CHAINBUF_FACTOR; + + if (prot_mask & (SHOST_DIX_TYPE0_PROTECTION + | SHOST_DIX_TYPE1_PROTECTION + | SHOST_DIX_TYPE2_PROTECTION + | SHOST_DIX_TYPE3_PROTECTION)) + num_chains += (num_chains / MPI3MR_CHAINBUFDIX_FACTOR); + + mrioc->chain_buf_count = num_chains; + sz = sizeof(struct chain_element) * num_chains; + mrioc->chain_sgl_list = kzalloc(sz, GFP_KERNEL); + if (!mrioc->chain_sgl_list) + goto out_failed; + + if (mrioc->max_sgl_entries > (mrioc->facts.max_data_length / + MPI3MR_PAGE_SIZE_4K)) + mrioc->max_sgl_entries = mrioc->facts.max_data_length / + MPI3MR_PAGE_SIZE_4K; + sz = mrioc->max_sgl_entries * sizeof(struct mpi3_sge_common); + ioc_info(mrioc, "number of sgl entries=%d chain buffer size=%dKB\n", + mrioc->max_sgl_entries, sz/1024); + + mrioc->chain_buf_pool = dma_pool_create("chain_buf pool", + &mrioc->pdev->dev, sz, 16, 0); + if (!mrioc->chain_buf_pool) { + ioc_err(mrioc, "chain buf pool: dma_pool_create failed\n"); + goto out_failed; + } + + for (i = 0; i < num_chains; i++) { + mrioc->chain_sgl_list[i].addr = + dma_pool_zalloc(mrioc->chain_buf_pool, GFP_KERNEL, + &mrioc->chain_sgl_list[i].dma_addr); + + if (!mrioc->chain_sgl_list[i].addr) + goto out_failed; + } + mrioc->chain_bitmap = bitmap_zalloc(num_chains, GFP_KERNEL); + if (!mrioc->chain_bitmap) + goto out_failed; + return retval; +out_failed: + retval = -1; + return retval; +} + +/** + * mpi3mr_port_enable_complete - Mark port enable complete + * @mrioc: Adapter instance reference + * @drv_cmd: Internal command tracker + * + * Call back for asynchronous port enable request sets the + * driver command to indicate port enable request is complete. + * + * Return: Nothing + */ +static void mpi3mr_port_enable_complete(struct mpi3mr_ioc *mrioc, + struct mpi3mr_drv_cmd *drv_cmd) +{ + drv_cmd->callback = NULL; + mrioc->scan_started = 0; + if (drv_cmd->state & MPI3MR_CMD_RESET) + mrioc->scan_failed = MPI3_IOCSTATUS_INTERNAL_ERROR; + else + mrioc->scan_failed = drv_cmd->ioc_status; + drv_cmd->state = MPI3MR_CMD_NOTUSED; +} + +/** + * mpi3mr_issue_port_enable - Issue Port Enable + * @mrioc: Adapter instance reference + * @async: Flag to wait for completion or not + * + * Issue Port Enable MPI request through admin queue and if the + * async flag is not set wait for the completion of the port + * enable or time out. + * + * Return: 0 on success, non-zero on failures. + */ +int mpi3mr_issue_port_enable(struct mpi3mr_ioc *mrioc, u8 async) +{ + struct mpi3_port_enable_request pe_req; + int retval = 0; + u32 pe_timeout = MPI3MR_PORTENABLE_TIMEOUT; + + memset(&pe_req, 0, sizeof(pe_req)); + mutex_lock(&mrioc->init_cmds.mutex); + if (mrioc->init_cmds.state & MPI3MR_CMD_PENDING) { + retval = -1; + ioc_err(mrioc, "Issue PortEnable: Init command is in use\n"); + mutex_unlock(&mrioc->init_cmds.mutex); + goto out; + } + mrioc->init_cmds.state = MPI3MR_CMD_PENDING; + if (async) { + mrioc->init_cmds.is_waiting = 0; + mrioc->init_cmds.callback = mpi3mr_port_enable_complete; + } else { + mrioc->init_cmds.is_waiting = 1; + mrioc->init_cmds.callback = NULL; + init_completion(&mrioc->init_cmds.done); + } + pe_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_INITCMDS); + pe_req.function = MPI3_FUNCTION_PORT_ENABLE; + + retval = mpi3mr_admin_request_post(mrioc, &pe_req, sizeof(pe_req), 1); + if (retval) { + ioc_err(mrioc, "Issue PortEnable: Admin Post failed\n"); + goto out_unlock; + } + if (async) { + mutex_unlock(&mrioc->init_cmds.mutex); + goto out; + } + + wait_for_completion_timeout(&mrioc->init_cmds.done, (pe_timeout * HZ)); + if (!(mrioc->init_cmds.state & MPI3MR_CMD_COMPLETE)) { + ioc_err(mrioc, "port enable timed out\n"); + retval = -1; + mpi3mr_check_rh_fault_ioc(mrioc, MPI3MR_RESET_FROM_PE_TIMEOUT); + goto out_unlock; + } + mpi3mr_port_enable_complete(mrioc, &mrioc->init_cmds); + +out_unlock: + mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; + mutex_unlock(&mrioc->init_cmds.mutex); +out: + return retval; +} + +/* Protocol type to name mapper structure */ +static const struct { + u8 protocol; + char *name; +} mpi3mr_protocols[] = { + { MPI3_IOCFACTS_PROTOCOL_SCSI_INITIATOR, "Initiator" }, + { MPI3_IOCFACTS_PROTOCOL_SCSI_TARGET, "Target" }, + { MPI3_IOCFACTS_PROTOCOL_NVME, "NVMe attachment" }, +}; + +/* Capability to name mapper structure*/ +static const struct { + u32 capability; + char *name; +} mpi3mr_capabilities[] = { + { MPI3_IOCFACTS_CAPABILITY_RAID_CAPABLE, "RAID" }, + { MPI3_IOCFACTS_CAPABILITY_MULTIPATH_ENABLED, "MultiPath" }, +}; + +/** + * mpi3mr_print_ioc_info - Display controller information + * @mrioc: Adapter instance reference + * + * Display controller personalit, capability, supported + * protocols etc. + * + * Return: Nothing + */ +static void +mpi3mr_print_ioc_info(struct mpi3mr_ioc *mrioc) +{ + int i = 0, bytes_written = 0; + char personality[16]; + char protocol[50] = {0}; + char capabilities[100] = {0}; + struct mpi3mr_compimg_ver *fwver = &mrioc->facts.fw_ver; + + switch (mrioc->facts.personality) { + case MPI3_IOCFACTS_FLAGS_PERSONALITY_EHBA: + strncpy(personality, "Enhanced HBA", sizeof(personality)); + break; + case MPI3_IOCFACTS_FLAGS_PERSONALITY_RAID_DDR: + strncpy(personality, "RAID", sizeof(personality)); + break; + default: + strncpy(personality, "Unknown", sizeof(personality)); + break; + } + + ioc_info(mrioc, "Running in %s Personality", personality); + + ioc_info(mrioc, "FW version(%d.%d.%d.%d.%d.%d)\n", + fwver->gen_major, fwver->gen_minor, fwver->ph_major, + fwver->ph_minor, fwver->cust_id, fwver->build_num); + + for (i = 0; i < ARRAY_SIZE(mpi3mr_protocols); i++) { + if (mrioc->facts.protocol_flags & + mpi3mr_protocols[i].protocol) { + bytes_written += scnprintf(protocol + bytes_written, + sizeof(protocol) - bytes_written, "%s%s", + bytes_written ? "," : "", + mpi3mr_protocols[i].name); + } + } + + bytes_written = 0; + for (i = 0; i < ARRAY_SIZE(mpi3mr_capabilities); i++) { + if (mrioc->facts.protocol_flags & + mpi3mr_capabilities[i].capability) { + bytes_written += scnprintf(capabilities + bytes_written, + sizeof(capabilities) - bytes_written, "%s%s", + bytes_written ? "," : "", + mpi3mr_capabilities[i].name); + } + } + + ioc_info(mrioc, "Protocol=(%s), Capabilities=(%s)\n", + protocol, capabilities); +} + +/** + * mpi3mr_cleanup_resources - Free PCI resources + * @mrioc: Adapter instance reference + * + * Unmap PCI device memory and disable PCI device. + * + * Return: 0 on success and non-zero on failure. + */ +void mpi3mr_cleanup_resources(struct mpi3mr_ioc *mrioc) +{ + struct pci_dev *pdev = mrioc->pdev; + + mpi3mr_cleanup_isr(mrioc); + + if (mrioc->sysif_regs) { + iounmap((void __iomem *)mrioc->sysif_regs); + mrioc->sysif_regs = NULL; + } + + if (pci_is_enabled(pdev)) { + if (mrioc->bars) + pci_release_selected_regions(pdev, mrioc->bars); + pci_disable_device(pdev); + } +} + +/** + * mpi3mr_setup_resources - Enable PCI resources + * @mrioc: Adapter instance reference + * + * Enable PCI device memory, MSI-x registers and set DMA mask. + * + * Return: 0 on success and non-zero on failure. + */ +int mpi3mr_setup_resources(struct mpi3mr_ioc *mrioc) +{ + struct pci_dev *pdev = mrioc->pdev; + u32 memap_sz = 0; + int i, retval = 0, capb = 0; + u16 message_control; + u64 dma_mask = mrioc->dma_mask ? mrioc->dma_mask : + ((sizeof(dma_addr_t) > 4) ? DMA_BIT_MASK(64) : DMA_BIT_MASK(32)); + + if (pci_enable_device_mem(pdev)) { + ioc_err(mrioc, "pci_enable_device_mem: failed\n"); + retval = -ENODEV; + goto out_failed; + } + + capb = pci_find_capability(pdev, PCI_CAP_ID_MSIX); + if (!capb) { + ioc_err(mrioc, "Unable to find MSI-X Capabilities\n"); + retval = -ENODEV; + goto out_failed; + } + mrioc->bars = pci_select_bars(pdev, IORESOURCE_MEM); + + if (pci_request_selected_regions(pdev, mrioc->bars, + mrioc->driver_name)) { + ioc_err(mrioc, "pci_request_selected_regions: failed\n"); + retval = -ENODEV; + goto out_failed; + } + + for (i = 0; (i < DEVICE_COUNT_RESOURCE); i++) { + if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) { + mrioc->sysif_regs_phys = pci_resource_start(pdev, i); + memap_sz = pci_resource_len(pdev, i); + mrioc->sysif_regs = + ioremap(mrioc->sysif_regs_phys, memap_sz); + break; + } + } + + pci_set_master(pdev); + + retval = dma_set_mask_and_coherent(&pdev->dev, dma_mask); + if (retval) { + if (dma_mask != DMA_BIT_MASK(32)) { + ioc_warn(mrioc, "Setting 64 bit DMA mask failed\n"); + dma_mask = DMA_BIT_MASK(32); + retval = dma_set_mask_and_coherent(&pdev->dev, + dma_mask); + } + if (retval) { + mrioc->dma_mask = 0; + ioc_err(mrioc, "Setting 32 bit DMA mask also failed\n"); + goto out_failed; + } + } + mrioc->dma_mask = dma_mask; + + if (!mrioc->sysif_regs) { + ioc_err(mrioc, + "Unable to map adapter memory or resource not found\n"); + retval = -EINVAL; + goto out_failed; + } + + pci_read_config_word(pdev, capb + 2, &message_control); + mrioc->msix_count = (message_control & 0x3FF) + 1; + + pci_save_state(pdev); + + pci_set_drvdata(pdev, mrioc->shost); + + mpi3mr_ioc_disable_intr(mrioc); + + ioc_info(mrioc, "iomem(0x%016llx), mapped(0x%p), size(%d)\n", + (unsigned long long)mrioc->sysif_regs_phys, + mrioc->sysif_regs, memap_sz); + ioc_info(mrioc, "Number of MSI-X vectors found in capabilities: (%d)\n", + mrioc->msix_count); + + if (!reset_devices && poll_queues > 0) + mrioc->requested_poll_qcount = min_t(int, poll_queues, + mrioc->msix_count - 2); + return retval; + +out_failed: + mpi3mr_cleanup_resources(mrioc); + return retval; +} + +/** + * mpi3mr_enable_events - Enable required events + * @mrioc: Adapter instance reference + * + * This routine unmasks the events required by the driver by + * sennding appropriate event mask bitmapt through an event + * notification request. + * + * Return: 0 on success and non-zero on failure. + */ +static int mpi3mr_enable_events(struct mpi3mr_ioc *mrioc) +{ + int retval = 0; + u32 i; + + for (i = 0; i < MPI3_EVENT_NOTIFY_EVENTMASK_WORDS; i++) + mrioc->event_masks[i] = -1; + + mpi3mr_unmask_events(mrioc, MPI3_EVENT_DEVICE_ADDED); + mpi3mr_unmask_events(mrioc, MPI3_EVENT_DEVICE_INFO_CHANGED); + mpi3mr_unmask_events(mrioc, MPI3_EVENT_DEVICE_STATUS_CHANGE); + mpi3mr_unmask_events(mrioc, MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE); + mpi3mr_unmask_events(mrioc, MPI3_EVENT_ENCL_DEVICE_ADDED); + mpi3mr_unmask_events(mrioc, MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST); + mpi3mr_unmask_events(mrioc, MPI3_EVENT_SAS_DISCOVERY); + mpi3mr_unmask_events(mrioc, MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR); + mpi3mr_unmask_events(mrioc, MPI3_EVENT_SAS_BROADCAST_PRIMITIVE); + mpi3mr_unmask_events(mrioc, MPI3_EVENT_PCIE_TOPOLOGY_CHANGE_LIST); + mpi3mr_unmask_events(mrioc, MPI3_EVENT_PCIE_ENUMERATION); + mpi3mr_unmask_events(mrioc, MPI3_EVENT_PREPARE_FOR_RESET); + mpi3mr_unmask_events(mrioc, MPI3_EVENT_CABLE_MGMT); + mpi3mr_unmask_events(mrioc, MPI3_EVENT_ENERGY_PACK_CHANGE); + + retval = mpi3mr_issue_event_notification(mrioc); + if (retval) + ioc_err(mrioc, "failed to issue event notification %d\n", + retval); + return retval; +} + +/** + * mpi3mr_init_ioc - Initialize the controller + * @mrioc: Adapter instance reference + * + * This the controller initialization routine, executed either + * after soft reset or from pci probe callback. + * Setup the required resources, memory map the controller + * registers, create admin and operational reply queue pairs, + * allocate required memory for reply pool, sense buffer pool, + * issue IOC init request to the firmware, unmask the events and + * issue port enable to discover SAS/SATA/NVMe devies and RAID + * volumes. + * + * Return: 0 on success and non-zero on failure. + */ +int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc) +{ + int retval = 0; + u8 retry = 0; + struct mpi3_ioc_facts_data facts_data; + u32 sz; + +retry_init: + retval = mpi3mr_bring_ioc_ready(mrioc); + if (retval) { + ioc_err(mrioc, "Failed to bring ioc ready: error %d\n", + retval); + goto out_failed_noretry; + } + + retval = mpi3mr_setup_isr(mrioc, 1); + if (retval) { + ioc_err(mrioc, "Failed to setup ISR error %d\n", + retval); + goto out_failed_noretry; + } + + retval = mpi3mr_issue_iocfacts(mrioc, &facts_data); + if (retval) { + ioc_err(mrioc, "Failed to Issue IOC Facts %d\n", + retval); + goto out_failed; + } + + mrioc->max_host_ios = mrioc->facts.max_reqs - MPI3MR_INTERNAL_CMDS_RESVD; + mrioc->shost->max_sectors = mrioc->facts.max_data_length / 512; + mrioc->num_io_throttle_group = mrioc->facts.max_io_throttle_group; + atomic_set(&mrioc->pend_large_data_sz, 0); + + if (reset_devices) + mrioc->max_host_ios = min_t(int, mrioc->max_host_ios, + MPI3MR_HOST_IOS_KDUMP); + + if (!(mrioc->facts.ioc_capabilities & + MPI3_IOCFACTS_CAPABILITY_MULTIPATH_ENABLED)) { + mrioc->sas_transport_enabled = 1; + mrioc->scsi_device_channel = 1; + mrioc->shost->max_channel = 1; + mrioc->shost->transportt = mpi3mr_transport_template; + } + + mrioc->reply_sz = mrioc->facts.reply_sz; + + retval = mpi3mr_check_reset_dma_mask(mrioc); + if (retval) { + ioc_err(mrioc, "Resetting dma mask failed %d\n", + retval); + goto out_failed_noretry; + } + + mpi3mr_print_ioc_info(mrioc); + + if (!mrioc->cfg_page) { + dprint_init(mrioc, "allocating config page buffers\n"); + mrioc->cfg_page_sz = MPI3MR_DEFAULT_CFG_PAGE_SZ; + mrioc->cfg_page = dma_alloc_coherent(&mrioc->pdev->dev, + mrioc->cfg_page_sz, &mrioc->cfg_page_dma, GFP_KERNEL); + if (!mrioc->cfg_page) { + retval = -1; + goto out_failed_noretry; + } + } + + if (!mrioc->init_cmds.reply) { + retval = mpi3mr_alloc_reply_sense_bufs(mrioc); + if (retval) { + ioc_err(mrioc, + "%s :Failed to allocated reply sense buffers %d\n", + __func__, retval); + goto out_failed_noretry; + } + } + + if (!mrioc->chain_sgl_list) { + retval = mpi3mr_alloc_chain_bufs(mrioc); + if (retval) { + ioc_err(mrioc, "Failed to allocated chain buffers %d\n", + retval); + goto out_failed_noretry; + } + } + + retval = mpi3mr_issue_iocinit(mrioc); + if (retval) { + ioc_err(mrioc, "Failed to Issue IOC Init %d\n", + retval); + goto out_failed; + } + + retval = mpi3mr_print_pkg_ver(mrioc); + if (retval) { + ioc_err(mrioc, "failed to get package version\n"); + goto out_failed; + } + + retval = mpi3mr_setup_isr(mrioc, 0); + if (retval) { + ioc_err(mrioc, "Failed to re-setup ISR, error %d\n", + retval); + goto out_failed_noretry; + } + + retval = mpi3mr_create_op_queues(mrioc); + if (retval) { + ioc_err(mrioc, "Failed to create OpQueues error %d\n", + retval); + goto out_failed; + } + + if (!mrioc->pel_seqnum_virt) { + dprint_init(mrioc, "allocating memory for pel_seqnum_virt\n"); + mrioc->pel_seqnum_sz = sizeof(struct mpi3_pel_seq); + mrioc->pel_seqnum_virt = dma_alloc_coherent(&mrioc->pdev->dev, + mrioc->pel_seqnum_sz, &mrioc->pel_seqnum_dma, + GFP_KERNEL); + if (!mrioc->pel_seqnum_virt) { + retval = -ENOMEM; + goto out_failed_noretry; + } + } + + if (!mrioc->throttle_groups && mrioc->num_io_throttle_group) { + dprint_init(mrioc, "allocating memory for throttle groups\n"); + sz = sizeof(struct mpi3mr_throttle_group_info); + mrioc->throttle_groups = kcalloc(mrioc->num_io_throttle_group, sz, GFP_KERNEL); + if (!mrioc->throttle_groups) { + retval = -1; + goto out_failed_noretry; + } + } + + retval = mpi3mr_enable_events(mrioc); + if (retval) { + ioc_err(mrioc, "failed to enable events %d\n", + retval); + goto out_failed; + } + + ioc_info(mrioc, "controller initialization completed successfully\n"); + return retval; +out_failed: + if (retry < 2) { + retry++; + ioc_warn(mrioc, "retrying controller initialization, retry_count:%d\n", + retry); + mpi3mr_memset_buffers(mrioc); + goto retry_init; + } + retval = -1; +out_failed_noretry: + ioc_err(mrioc, "controller initialization failed\n"); + mpi3mr_issue_reset(mrioc, MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT, + MPI3MR_RESET_FROM_CTLR_CLEANUP); + mrioc->unrecoverable = 1; + return retval; +} + +/** + * mpi3mr_reinit_ioc - Re-Initialize the controller + * @mrioc: Adapter instance reference + * @is_resume: Called from resume or reset path + * + * This the controller re-initialization routine, executed from + * the soft reset handler or resume callback. Creates + * operational reply queue pairs, allocate required memory for + * reply pool, sense buffer pool, issue IOC init request to the + * firmware, unmask the events and issue port enable to discover + * SAS/SATA/NVMe devices and RAID volumes. + * + * Return: 0 on success and non-zero on failure. + */ +int mpi3mr_reinit_ioc(struct mpi3mr_ioc *mrioc, u8 is_resume) +{ + int retval = 0; + u8 retry = 0; + struct mpi3_ioc_facts_data facts_data; + u32 pe_timeout, ioc_status; + +retry_init: + pe_timeout = + (MPI3MR_PORTENABLE_TIMEOUT / MPI3MR_PORTENABLE_POLL_INTERVAL); + + dprint_reset(mrioc, "bringing up the controller to ready state\n"); + retval = mpi3mr_bring_ioc_ready(mrioc); + if (retval) { + ioc_err(mrioc, "failed to bring to ready state\n"); + goto out_failed_noretry; + } + + if (is_resume) { + dprint_reset(mrioc, "setting up single ISR\n"); + retval = mpi3mr_setup_isr(mrioc, 1); + if (retval) { + ioc_err(mrioc, "failed to setup ISR\n"); + goto out_failed_noretry; + } + } else + mpi3mr_ioc_enable_intr(mrioc); + + dprint_reset(mrioc, "getting ioc_facts\n"); + retval = mpi3mr_issue_iocfacts(mrioc, &facts_data); + if (retval) { + ioc_err(mrioc, "failed to get ioc_facts\n"); + goto out_failed; + } + + dprint_reset(mrioc, "validating ioc_facts\n"); + retval = mpi3mr_revalidate_factsdata(mrioc); + if (retval) { + ioc_err(mrioc, "failed to revalidate ioc_facts data\n"); + goto out_failed_noretry; + } + + mpi3mr_print_ioc_info(mrioc); + + dprint_reset(mrioc, "sending ioc_init\n"); + retval = mpi3mr_issue_iocinit(mrioc); + if (retval) { + ioc_err(mrioc, "failed to send ioc_init\n"); + goto out_failed; + } + + dprint_reset(mrioc, "getting package version\n"); + retval = mpi3mr_print_pkg_ver(mrioc); + if (retval) { + ioc_err(mrioc, "failed to get package version\n"); + goto out_failed; + } + + if (is_resume) { + dprint_reset(mrioc, "setting up multiple ISR\n"); + retval = mpi3mr_setup_isr(mrioc, 0); + if (retval) { + ioc_err(mrioc, "failed to re-setup ISR\n"); + goto out_failed_noretry; + } + } + + dprint_reset(mrioc, "creating operational queue pairs\n"); + retval = mpi3mr_create_op_queues(mrioc); + if (retval) { + ioc_err(mrioc, "failed to create operational queue pairs\n"); + goto out_failed; + } + + if (!mrioc->pel_seqnum_virt) { + dprint_reset(mrioc, "allocating memory for pel_seqnum_virt\n"); + mrioc->pel_seqnum_sz = sizeof(struct mpi3_pel_seq); + mrioc->pel_seqnum_virt = dma_alloc_coherent(&mrioc->pdev->dev, + mrioc->pel_seqnum_sz, &mrioc->pel_seqnum_dma, + GFP_KERNEL); + if (!mrioc->pel_seqnum_virt) { + retval = -ENOMEM; + goto out_failed_noretry; + } + } + + if (mrioc->shost->nr_hw_queues > mrioc->num_op_reply_q) { + ioc_err(mrioc, + "cannot create minimum number of operational queues expected:%d created:%d\n", + mrioc->shost->nr_hw_queues, mrioc->num_op_reply_q); + retval = -1; + goto out_failed_noretry; + } + + dprint_reset(mrioc, "enabling events\n"); + retval = mpi3mr_enable_events(mrioc); + if (retval) { + ioc_err(mrioc, "failed to enable events\n"); + goto out_failed; + } + + mrioc->device_refresh_on = 1; + mpi3mr_add_event_wait_for_device_refresh(mrioc); + + ioc_info(mrioc, "sending port enable\n"); + retval = mpi3mr_issue_port_enable(mrioc, 1); + if (retval) { + ioc_err(mrioc, "failed to issue port enable\n"); + goto out_failed; + } + do { + ssleep(MPI3MR_PORTENABLE_POLL_INTERVAL); + if (mrioc->init_cmds.state == MPI3MR_CMD_NOTUSED) + break; + if (!pci_device_is_present(mrioc->pdev)) + mrioc->unrecoverable = 1; + if (mrioc->unrecoverable) { + retval = -1; + goto out_failed_noretry; + } + ioc_status = readl(&mrioc->sysif_regs->ioc_status); + if ((ioc_status & MPI3_SYSIF_IOC_STATUS_RESET_HISTORY) || + (ioc_status & MPI3_SYSIF_IOC_STATUS_FAULT)) { + mpi3mr_print_fault_info(mrioc); + mrioc->init_cmds.is_waiting = 0; + mrioc->init_cmds.callback = NULL; + mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; + goto out_failed; + } + } while (--pe_timeout); + + if (!pe_timeout) { + ioc_err(mrioc, "port enable timed out\n"); + mpi3mr_check_rh_fault_ioc(mrioc, + MPI3MR_RESET_FROM_PE_TIMEOUT); + mrioc->init_cmds.is_waiting = 0; + mrioc->init_cmds.callback = NULL; + mrioc->init_cmds.state = MPI3MR_CMD_NOTUSED; + goto out_failed; + } else if (mrioc->scan_failed) { + ioc_err(mrioc, + "port enable failed with status=0x%04x\n", + mrioc->scan_failed); + } else + ioc_info(mrioc, "port enable completed successfully\n"); + + ioc_info(mrioc, "controller %s completed successfully\n", + (is_resume)?"resume":"re-initialization"); + return retval; +out_failed: + if (retry < 2) { + retry++; + ioc_warn(mrioc, "retrying controller %s, retry_count:%d\n", + (is_resume)?"resume":"re-initialization", retry); + mpi3mr_memset_buffers(mrioc); + goto retry_init; + } + retval = -1; +out_failed_noretry: + ioc_err(mrioc, "controller %s is failed\n", + (is_resume)?"resume":"re-initialization"); + mpi3mr_issue_reset(mrioc, MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT, + MPI3MR_RESET_FROM_CTLR_CLEANUP); + mrioc->unrecoverable = 1; + return retval; +} + +/** + * mpi3mr_memset_op_reply_q_buffers - memset the operational reply queue's + * segments + * @mrioc: Adapter instance reference + * @qidx: Operational reply queue index + * + * Return: Nothing. + */ +static void mpi3mr_memset_op_reply_q_buffers(struct mpi3mr_ioc *mrioc, u16 qidx) +{ + struct op_reply_qinfo *op_reply_q = mrioc->op_reply_qinfo + qidx; + struct segments *segments; + int i, size; + + if (!op_reply_q->q_segments) + return; + + size = op_reply_q->segment_qd * mrioc->op_reply_desc_sz; + segments = op_reply_q->q_segments; + for (i = 0; i < op_reply_q->num_segments; i++) + memset(segments[i].segment, 0, size); +} + +/** + * mpi3mr_memset_op_req_q_buffers - memset the operational request queue's + * segments + * @mrioc: Adapter instance reference + * @qidx: Operational request queue index + * + * Return: Nothing. + */ +static void mpi3mr_memset_op_req_q_buffers(struct mpi3mr_ioc *mrioc, u16 qidx) +{ + struct op_req_qinfo *op_req_q = mrioc->req_qinfo + qidx; + struct segments *segments; + int i, size; + + if (!op_req_q->q_segments) + return; + + size = op_req_q->segment_qd * mrioc->facts.op_req_sz; + segments = op_req_q->q_segments; + for (i = 0; i < op_req_q->num_segments; i++) + memset(segments[i].segment, 0, size); +} + +/** + * mpi3mr_memset_buffers - memset memory for a controller + * @mrioc: Adapter instance reference + * + * clear all the memory allocated for a controller, typically + * called post reset to reuse the memory allocated during the + * controller init. + * + * Return: Nothing. + */ +void mpi3mr_memset_buffers(struct mpi3mr_ioc *mrioc) +{ + u16 i; + struct mpi3mr_throttle_group_info *tg; + + mrioc->change_count = 0; + mrioc->active_poll_qcount = 0; + mrioc->default_qcount = 0; + if (mrioc->admin_req_base) + memset(mrioc->admin_req_base, 0, mrioc->admin_req_q_sz); + if (mrioc->admin_reply_base) + memset(mrioc->admin_reply_base, 0, mrioc->admin_reply_q_sz); + atomic_set(&mrioc->admin_reply_q_in_use, 0); + + if (mrioc->init_cmds.reply) { + memset(mrioc->init_cmds.reply, 0, sizeof(*mrioc->init_cmds.reply)); + memset(mrioc->bsg_cmds.reply, 0, + sizeof(*mrioc->bsg_cmds.reply)); + memset(mrioc->host_tm_cmds.reply, 0, + sizeof(*mrioc->host_tm_cmds.reply)); + memset(mrioc->pel_cmds.reply, 0, + sizeof(*mrioc->pel_cmds.reply)); + memset(mrioc->pel_abort_cmd.reply, 0, + sizeof(*mrioc->pel_abort_cmd.reply)); + memset(mrioc->transport_cmds.reply, 0, + sizeof(*mrioc->transport_cmds.reply)); + for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++) + memset(mrioc->dev_rmhs_cmds[i].reply, 0, + sizeof(*mrioc->dev_rmhs_cmds[i].reply)); + for (i = 0; i < MPI3MR_NUM_EVTACKCMD; i++) + memset(mrioc->evtack_cmds[i].reply, 0, + sizeof(*mrioc->evtack_cmds[i].reply)); + bitmap_clear(mrioc->removepend_bitmap, 0, + mrioc->dev_handle_bitmap_bits); + bitmap_clear(mrioc->devrem_bitmap, 0, MPI3MR_NUM_DEVRMCMD); + bitmap_clear(mrioc->evtack_cmds_bitmap, 0, + MPI3MR_NUM_EVTACKCMD); + } + + for (i = 0; i < mrioc->num_queues; i++) { + mrioc->op_reply_qinfo[i].qid = 0; + mrioc->op_reply_qinfo[i].ci = 0; + mrioc->op_reply_qinfo[i].num_replies = 0; + mrioc->op_reply_qinfo[i].ephase = 0; + atomic_set(&mrioc->op_reply_qinfo[i].pend_ios, 0); + atomic_set(&mrioc->op_reply_qinfo[i].in_use, 0); + mpi3mr_memset_op_reply_q_buffers(mrioc, i); + + mrioc->req_qinfo[i].ci = 0; + mrioc->req_qinfo[i].pi = 0; + mrioc->req_qinfo[i].num_requests = 0; + mrioc->req_qinfo[i].qid = 0; + mrioc->req_qinfo[i].reply_qid = 0; + spin_lock_init(&mrioc->req_qinfo[i].q_lock); + mpi3mr_memset_op_req_q_buffers(mrioc, i); + } + + atomic_set(&mrioc->pend_large_data_sz, 0); + if (mrioc->throttle_groups) { + tg = mrioc->throttle_groups; + for (i = 0; i < mrioc->num_io_throttle_group; i++, tg++) { + tg->id = 0; + tg->fw_qd = 0; + tg->modified_qd = 0; + tg->io_divert = 0; + tg->need_qd_reduction = 0; + tg->high = 0; + tg->low = 0; + tg->qd_reduction = 0; + atomic_set(&tg->pend_large_data_sz, 0); + } + } +} + +/** + * mpi3mr_free_mem - Free memory allocated for a controller + * @mrioc: Adapter instance reference + * + * Free all the memory allocated for a controller. + * + * Return: Nothing. + */ +void mpi3mr_free_mem(struct mpi3mr_ioc *mrioc) +{ + u16 i; + struct mpi3mr_intr_info *intr_info; + + mpi3mr_free_enclosure_list(mrioc); + + if (mrioc->sense_buf_pool) { + if (mrioc->sense_buf) + dma_pool_free(mrioc->sense_buf_pool, mrioc->sense_buf, + mrioc->sense_buf_dma); + dma_pool_destroy(mrioc->sense_buf_pool); + mrioc->sense_buf = NULL; + mrioc->sense_buf_pool = NULL; + } + if (mrioc->sense_buf_q_pool) { + if (mrioc->sense_buf_q) + dma_pool_free(mrioc->sense_buf_q_pool, + mrioc->sense_buf_q, mrioc->sense_buf_q_dma); + dma_pool_destroy(mrioc->sense_buf_q_pool); + mrioc->sense_buf_q = NULL; + mrioc->sense_buf_q_pool = NULL; + } + + if (mrioc->reply_buf_pool) { + if (mrioc->reply_buf) + dma_pool_free(mrioc->reply_buf_pool, mrioc->reply_buf, + mrioc->reply_buf_dma); + dma_pool_destroy(mrioc->reply_buf_pool); + mrioc->reply_buf = NULL; + mrioc->reply_buf_pool = NULL; + } + if (mrioc->reply_free_q_pool) { + if (mrioc->reply_free_q) + dma_pool_free(mrioc->reply_free_q_pool, + mrioc->reply_free_q, mrioc->reply_free_q_dma); + dma_pool_destroy(mrioc->reply_free_q_pool); + mrioc->reply_free_q = NULL; + mrioc->reply_free_q_pool = NULL; + } + + for (i = 0; i < mrioc->num_op_req_q; i++) + mpi3mr_free_op_req_q_segments(mrioc, i); + + for (i = 0; i < mrioc->num_op_reply_q; i++) + mpi3mr_free_op_reply_q_segments(mrioc, i); + + for (i = 0; i < mrioc->intr_info_count; i++) { + intr_info = mrioc->intr_info + i; + intr_info->op_reply_q = NULL; + } + + kfree(mrioc->req_qinfo); + mrioc->req_qinfo = NULL; + mrioc->num_op_req_q = 0; + + kfree(mrioc->op_reply_qinfo); + mrioc->op_reply_qinfo = NULL; + mrioc->num_op_reply_q = 0; + + kfree(mrioc->init_cmds.reply); + mrioc->init_cmds.reply = NULL; + + kfree(mrioc->bsg_cmds.reply); + mrioc->bsg_cmds.reply = NULL; + + kfree(mrioc->host_tm_cmds.reply); + mrioc->host_tm_cmds.reply = NULL; + + kfree(mrioc->pel_cmds.reply); + mrioc->pel_cmds.reply = NULL; + + kfree(mrioc->pel_abort_cmd.reply); + mrioc->pel_abort_cmd.reply = NULL; + + for (i = 0; i < MPI3MR_NUM_EVTACKCMD; i++) { + kfree(mrioc->evtack_cmds[i].reply); + mrioc->evtack_cmds[i].reply = NULL; + } + + bitmap_free(mrioc->removepend_bitmap); + mrioc->removepend_bitmap = NULL; + + bitmap_free(mrioc->devrem_bitmap); + mrioc->devrem_bitmap = NULL; + + bitmap_free(mrioc->evtack_cmds_bitmap); + mrioc->evtack_cmds_bitmap = NULL; + + bitmap_free(mrioc->chain_bitmap); + mrioc->chain_bitmap = NULL; + + kfree(mrioc->transport_cmds.reply); + mrioc->transport_cmds.reply = NULL; + + for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++) { + kfree(mrioc->dev_rmhs_cmds[i].reply); + mrioc->dev_rmhs_cmds[i].reply = NULL; + } + + if (mrioc->chain_buf_pool) { + for (i = 0; i < mrioc->chain_buf_count; i++) { + if (mrioc->chain_sgl_list[i].addr) { + dma_pool_free(mrioc->chain_buf_pool, + mrioc->chain_sgl_list[i].addr, + mrioc->chain_sgl_list[i].dma_addr); + mrioc->chain_sgl_list[i].addr = NULL; + } + } + dma_pool_destroy(mrioc->chain_buf_pool); + mrioc->chain_buf_pool = NULL; + } + + kfree(mrioc->chain_sgl_list); + mrioc->chain_sgl_list = NULL; + + if (mrioc->admin_reply_base) { + dma_free_coherent(&mrioc->pdev->dev, mrioc->admin_reply_q_sz, + mrioc->admin_reply_base, mrioc->admin_reply_dma); + mrioc->admin_reply_base = NULL; + } + if (mrioc->admin_req_base) { + dma_free_coherent(&mrioc->pdev->dev, mrioc->admin_req_q_sz, + mrioc->admin_req_base, mrioc->admin_req_dma); + mrioc->admin_req_base = NULL; + } + if (mrioc->cfg_page) { + dma_free_coherent(&mrioc->pdev->dev, mrioc->cfg_page_sz, + mrioc->cfg_page, mrioc->cfg_page_dma); + mrioc->cfg_page = NULL; + } + if (mrioc->pel_seqnum_virt) { + dma_free_coherent(&mrioc->pdev->dev, mrioc->pel_seqnum_sz, + mrioc->pel_seqnum_virt, mrioc->pel_seqnum_dma); + mrioc->pel_seqnum_virt = NULL; + } + + kfree(mrioc->throttle_groups); + mrioc->throttle_groups = NULL; + + kfree(mrioc->logdata_buf); + mrioc->logdata_buf = NULL; + +} + +/** + * mpi3mr_issue_ioc_shutdown - shutdown controller + * @mrioc: Adapter instance reference + * + * Send shutodwn notification to the controller and wait for the + * shutdown_timeout for it to be completed. + * + * Return: Nothing. + */ +static void mpi3mr_issue_ioc_shutdown(struct mpi3mr_ioc *mrioc) +{ + u32 ioc_config, ioc_status; + u8 retval = 1; + u32 timeout = MPI3MR_DEFAULT_SHUTDOWN_TIME * 10; + + ioc_info(mrioc, "Issuing shutdown Notification\n"); + if (mrioc->unrecoverable) { + ioc_warn(mrioc, + "IOC is unrecoverable shutdown is not issued\n"); + return; + } + ioc_status = readl(&mrioc->sysif_regs->ioc_status); + if ((ioc_status & MPI3_SYSIF_IOC_STATUS_SHUTDOWN_MASK) + == MPI3_SYSIF_IOC_STATUS_SHUTDOWN_IN_PROGRESS) { + ioc_info(mrioc, "shutdown already in progress\n"); + return; + } + + ioc_config = readl(&mrioc->sysif_regs->ioc_configuration); + ioc_config |= MPI3_SYSIF_IOC_CONFIG_SHUTDOWN_NORMAL; + ioc_config |= MPI3_SYSIF_IOC_CONFIG_DEVICE_SHUTDOWN_SEND_REQ; + + writel(ioc_config, &mrioc->sysif_regs->ioc_configuration); + + if (mrioc->facts.shutdown_timeout) + timeout = mrioc->facts.shutdown_timeout * 10; + + do { + ioc_status = readl(&mrioc->sysif_regs->ioc_status); + if ((ioc_status & MPI3_SYSIF_IOC_STATUS_SHUTDOWN_MASK) + == MPI3_SYSIF_IOC_STATUS_SHUTDOWN_COMPLETE) { + retval = 0; + break; + } + msleep(100); + } while (--timeout); + + ioc_status = readl(&mrioc->sysif_regs->ioc_status); + ioc_config = readl(&mrioc->sysif_regs->ioc_configuration); + + if (retval) { + if ((ioc_status & MPI3_SYSIF_IOC_STATUS_SHUTDOWN_MASK) + == MPI3_SYSIF_IOC_STATUS_SHUTDOWN_IN_PROGRESS) + ioc_warn(mrioc, + "shutdown still in progress after timeout\n"); + } + + ioc_info(mrioc, + "Base IOC Sts/Config after %s shutdown is (0x%x)/(0x%x)\n", + (!retval) ? "successful" : "failed", ioc_status, + ioc_config); +} + +/** + * mpi3mr_cleanup_ioc - Cleanup controller + * @mrioc: Adapter instance reference + * + * controller cleanup handler, Message unit reset or soft reset + * and shutdown notification is issued to the controller. + * + * Return: Nothing. + */ +void mpi3mr_cleanup_ioc(struct mpi3mr_ioc *mrioc) +{ + enum mpi3mr_iocstate ioc_state; + + dprint_exit(mrioc, "cleaning up the controller\n"); + mpi3mr_ioc_disable_intr(mrioc); + + ioc_state = mpi3mr_get_iocstate(mrioc); + + if ((!mrioc->unrecoverable) && (!mrioc->reset_in_progress) && + (ioc_state == MRIOC_STATE_READY)) { + if (mpi3mr_issue_and_process_mur(mrioc, + MPI3MR_RESET_FROM_CTLR_CLEANUP)) + mpi3mr_issue_reset(mrioc, + MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET, + MPI3MR_RESET_FROM_MUR_FAILURE); + mpi3mr_issue_ioc_shutdown(mrioc); + } + dprint_exit(mrioc, "controller cleanup completed\n"); +} + +/** + * mpi3mr_drv_cmd_comp_reset - Flush a internal driver command + * @mrioc: Adapter instance reference + * @cmdptr: Internal command tracker + * + * Complete an internal driver commands with state indicating it + * is completed due to reset. + * + * Return: Nothing. + */ +static inline void mpi3mr_drv_cmd_comp_reset(struct mpi3mr_ioc *mrioc, + struct mpi3mr_drv_cmd *cmdptr) +{ + if (cmdptr->state & MPI3MR_CMD_PENDING) { + cmdptr->state |= MPI3MR_CMD_RESET; + cmdptr->state &= ~MPI3MR_CMD_PENDING; + if (cmdptr->is_waiting) { + complete(&cmdptr->done); + cmdptr->is_waiting = 0; + } else if (cmdptr->callback) + cmdptr->callback(mrioc, cmdptr); + } +} + +/** + * mpi3mr_flush_drv_cmds - Flush internaldriver commands + * @mrioc: Adapter instance reference + * + * Flush all internal driver commands post reset + * + * Return: Nothing. + */ +void mpi3mr_flush_drv_cmds(struct mpi3mr_ioc *mrioc) +{ + struct mpi3mr_drv_cmd *cmdptr; + u8 i; + + cmdptr = &mrioc->init_cmds; + mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr); + + cmdptr = &mrioc->cfg_cmds; + mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr); + + cmdptr = &mrioc->bsg_cmds; + mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr); + cmdptr = &mrioc->host_tm_cmds; + mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr); + + for (i = 0; i < MPI3MR_NUM_DEVRMCMD; i++) { + cmdptr = &mrioc->dev_rmhs_cmds[i]; + mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr); + } + + for (i = 0; i < MPI3MR_NUM_EVTACKCMD; i++) { + cmdptr = &mrioc->evtack_cmds[i]; + mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr); + } + + cmdptr = &mrioc->pel_cmds; + mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr); + + cmdptr = &mrioc->pel_abort_cmd; + mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr); + + cmdptr = &mrioc->transport_cmds; + mpi3mr_drv_cmd_comp_reset(mrioc, cmdptr); +} + +/** + * mpi3mr_pel_wait_post - Issue PEL Wait + * @mrioc: Adapter instance reference + * @drv_cmd: Internal command tracker + * + * Issue PEL Wait MPI request through admin queue and return. + * + * Return: Nothing. + */ +static void mpi3mr_pel_wait_post(struct mpi3mr_ioc *mrioc, + struct mpi3mr_drv_cmd *drv_cmd) +{ + struct mpi3_pel_req_action_wait pel_wait; + + mrioc->pel_abort_requested = false; + + memset(&pel_wait, 0, sizeof(pel_wait)); + drv_cmd->state = MPI3MR_CMD_PENDING; + drv_cmd->is_waiting = 0; + drv_cmd->callback = mpi3mr_pel_wait_complete; + drv_cmd->ioc_status = 0; + drv_cmd->ioc_loginfo = 0; + pel_wait.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_PEL_WAIT); + pel_wait.function = MPI3_FUNCTION_PERSISTENT_EVENT_LOG; + pel_wait.action = MPI3_PEL_ACTION_WAIT; + pel_wait.starting_sequence_number = cpu_to_le32(mrioc->pel_newest_seqnum); + pel_wait.locale = cpu_to_le16(mrioc->pel_locale); + pel_wait.class = cpu_to_le16(mrioc->pel_class); + pel_wait.wait_time = MPI3_PEL_WAITTIME_INFINITE_WAIT; + dprint_bsg_info(mrioc, "sending pel_wait seqnum(%d), class(%d), locale(0x%08x)\n", + mrioc->pel_newest_seqnum, mrioc->pel_class, mrioc->pel_locale); + + if (mpi3mr_admin_request_post(mrioc, &pel_wait, sizeof(pel_wait), 0)) { + dprint_bsg_err(mrioc, + "Issuing PELWait: Admin post failed\n"); + drv_cmd->state = MPI3MR_CMD_NOTUSED; + drv_cmd->callback = NULL; + drv_cmd->retry_count = 0; + mrioc->pel_enabled = false; + } +} + +/** + * mpi3mr_pel_get_seqnum_post - Issue PEL Get Sequence number + * @mrioc: Adapter instance reference + * @drv_cmd: Internal command tracker + * + * Issue PEL get sequence number MPI request through admin queue + * and return. + * + * Return: 0 on success, non-zero on failure. + */ +int mpi3mr_pel_get_seqnum_post(struct mpi3mr_ioc *mrioc, + struct mpi3mr_drv_cmd *drv_cmd) +{ + struct mpi3_pel_req_action_get_sequence_numbers pel_getseq_req; + u8 sgl_flags = MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST; + int retval = 0; + + memset(&pel_getseq_req, 0, sizeof(pel_getseq_req)); + mrioc->pel_cmds.state = MPI3MR_CMD_PENDING; + mrioc->pel_cmds.is_waiting = 0; + mrioc->pel_cmds.ioc_status = 0; + mrioc->pel_cmds.ioc_loginfo = 0; + mrioc->pel_cmds.callback = mpi3mr_pel_get_seqnum_complete; + pel_getseq_req.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_PEL_WAIT); + pel_getseq_req.function = MPI3_FUNCTION_PERSISTENT_EVENT_LOG; + pel_getseq_req.action = MPI3_PEL_ACTION_GET_SEQNUM; + mpi3mr_add_sg_single(&pel_getseq_req.sgl, sgl_flags, + mrioc->pel_seqnum_sz, mrioc->pel_seqnum_dma); + + retval = mpi3mr_admin_request_post(mrioc, &pel_getseq_req, + sizeof(pel_getseq_req), 0); + if (retval) { + if (drv_cmd) { + drv_cmd->state = MPI3MR_CMD_NOTUSED; + drv_cmd->callback = NULL; + drv_cmd->retry_count = 0; + } + mrioc->pel_enabled = false; + } + + return retval; +} + +/** + * mpi3mr_pel_wait_complete - PELWait Completion callback + * @mrioc: Adapter instance reference + * @drv_cmd: Internal command tracker + * + * This is a callback handler for the PELWait request and + * firmware completes a PELWait request when it is aborted or a + * new PEL entry is available. This sends AEN to the application + * and if the PELwait completion is not due to PELAbort then + * this will send a request for new PEL Sequence number + * + * Return: Nothing. + */ +static void mpi3mr_pel_wait_complete(struct mpi3mr_ioc *mrioc, + struct mpi3mr_drv_cmd *drv_cmd) +{ + struct mpi3_pel_reply *pel_reply = NULL; + u16 ioc_status, pe_log_status; + bool do_retry = false; + + if (drv_cmd->state & MPI3MR_CMD_RESET) + goto cleanup_drv_cmd; + + ioc_status = drv_cmd->ioc_status & MPI3_IOCSTATUS_STATUS_MASK; + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, "%s: Failed ioc_status(0x%04x) Loginfo(0x%08x)\n", + __func__, ioc_status, drv_cmd->ioc_loginfo); + dprint_bsg_err(mrioc, + "pel_wait: failed with ioc_status(0x%04x), log_info(0x%08x)\n", + ioc_status, drv_cmd->ioc_loginfo); + do_retry = true; + } + + if (drv_cmd->state & MPI3MR_CMD_REPLY_VALID) + pel_reply = (struct mpi3_pel_reply *)drv_cmd->reply; + + if (!pel_reply) { + dprint_bsg_err(mrioc, + "pel_wait: failed due to no reply\n"); + goto out_failed; + } + + pe_log_status = le16_to_cpu(pel_reply->pe_log_status); + if ((pe_log_status != MPI3_PEL_STATUS_SUCCESS) && + (pe_log_status != MPI3_PEL_STATUS_ABORTED)) { + ioc_err(mrioc, "%s: Failed pe_log_status(0x%04x)\n", + __func__, pe_log_status); + dprint_bsg_err(mrioc, + "pel_wait: failed due to pel_log_status(0x%04x)\n", + pe_log_status); + do_retry = true; + } + + if (do_retry) { + if (drv_cmd->retry_count < MPI3MR_PEL_RETRY_COUNT) { + drv_cmd->retry_count++; + dprint_bsg_err(mrioc, "pel_wait: retrying(%d)\n", + drv_cmd->retry_count); + mpi3mr_pel_wait_post(mrioc, drv_cmd); + return; + } + dprint_bsg_err(mrioc, + "pel_wait: failed after all retries(%d)\n", + drv_cmd->retry_count); + goto out_failed; + } + atomic64_inc(&event_counter); + if (!mrioc->pel_abort_requested) { + mrioc->pel_cmds.retry_count = 0; + mpi3mr_pel_get_seqnum_post(mrioc, &mrioc->pel_cmds); + } + + return; +out_failed: + mrioc->pel_enabled = false; +cleanup_drv_cmd: + drv_cmd->state = MPI3MR_CMD_NOTUSED; + drv_cmd->callback = NULL; + drv_cmd->retry_count = 0; +} + +/** + * mpi3mr_pel_get_seqnum_complete - PELGetSeqNum Completion callback + * @mrioc: Adapter instance reference + * @drv_cmd: Internal command tracker + * + * This is a callback handler for the PEL get sequence number + * request and a new PEL wait request will be issued to the + * firmware from this + * + * Return: Nothing. + */ +void mpi3mr_pel_get_seqnum_complete(struct mpi3mr_ioc *mrioc, + struct mpi3mr_drv_cmd *drv_cmd) +{ + struct mpi3_pel_reply *pel_reply = NULL; + struct mpi3_pel_seq *pel_seqnum_virt; + u16 ioc_status; + bool do_retry = false; + + pel_seqnum_virt = (struct mpi3_pel_seq *)mrioc->pel_seqnum_virt; + + if (drv_cmd->state & MPI3MR_CMD_RESET) + goto cleanup_drv_cmd; + + ioc_status = drv_cmd->ioc_status & MPI3_IOCSTATUS_STATUS_MASK; + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { + dprint_bsg_err(mrioc, + "pel_get_seqnum: failed with ioc_status(0x%04x), log_info(0x%08x)\n", + ioc_status, drv_cmd->ioc_loginfo); + do_retry = true; + } + + if (drv_cmd->state & MPI3MR_CMD_REPLY_VALID) + pel_reply = (struct mpi3_pel_reply *)drv_cmd->reply; + if (!pel_reply) { + dprint_bsg_err(mrioc, + "pel_get_seqnum: failed due to no reply\n"); + goto out_failed; + } + + if (le16_to_cpu(pel_reply->pe_log_status) != MPI3_PEL_STATUS_SUCCESS) { + dprint_bsg_err(mrioc, + "pel_get_seqnum: failed due to pel_log_status(0x%04x)\n", + le16_to_cpu(pel_reply->pe_log_status)); + do_retry = true; + } + + if (do_retry) { + if (drv_cmd->retry_count < MPI3MR_PEL_RETRY_COUNT) { + drv_cmd->retry_count++; + dprint_bsg_err(mrioc, + "pel_get_seqnum: retrying(%d)\n", + drv_cmd->retry_count); + mpi3mr_pel_get_seqnum_post(mrioc, drv_cmd); + return; + } + + dprint_bsg_err(mrioc, + "pel_get_seqnum: failed after all retries(%d)\n", + drv_cmd->retry_count); + goto out_failed; + } + mrioc->pel_newest_seqnum = le32_to_cpu(pel_seqnum_virt->newest) + 1; + drv_cmd->retry_count = 0; + mpi3mr_pel_wait_post(mrioc, drv_cmd); + + return; +out_failed: + mrioc->pel_enabled = false; +cleanup_drv_cmd: + drv_cmd->state = MPI3MR_CMD_NOTUSED; + drv_cmd->callback = NULL; + drv_cmd->retry_count = 0; +} + +/** + * mpi3mr_soft_reset_handler - Reset the controller + * @mrioc: Adapter instance reference + * @reset_reason: Reset reason code + * @snapdump: Flag to generate snapdump in firmware or not + * + * This is an handler for recovering controller by issuing soft + * reset are diag fault reset. This is a blocking function and + * when one reset is executed if any other resets they will be + * blocked. All BSG requests will be blocked during the reset. If + * controller reset is successful then the controller will be + * reinitalized, otherwise the controller will be marked as not + * recoverable + * + * In snapdump bit is set, the controller is issued with diag + * fault reset so that the firmware can create a snap dump and + * post that the firmware will result in F000 fault and the + * driver will issue soft reset to recover from that. + * + * Return: 0 on success, non-zero on failure. + */ +int mpi3mr_soft_reset_handler(struct mpi3mr_ioc *mrioc, + u32 reset_reason, u8 snapdump) +{ + int retval = 0, i; + unsigned long flags; + u32 host_diagnostic, timeout = MPI3_SYSIF_DIAG_SAVE_TIMEOUT * 10; + + /* Block the reset handler until diag save in progress*/ + dprint_reset(mrioc, + "soft_reset_handler: check and block on diagsave_timeout(%d)\n", + mrioc->diagsave_timeout); + while (mrioc->diagsave_timeout) + ssleep(1); + /* + * Block new resets until the currently executing one is finished and + * return the status of the existing reset for all blocked resets + */ + dprint_reset(mrioc, "soft_reset_handler: acquiring reset_mutex\n"); + if (!mutex_trylock(&mrioc->reset_mutex)) { + ioc_info(mrioc, + "controller reset triggered by %s is blocked due to another reset in progress\n", + mpi3mr_reset_rc_name(reset_reason)); + do { + ssleep(1); + } while (mrioc->reset_in_progress == 1); + ioc_info(mrioc, + "returning previous reset result(%d) for the reset triggered by %s\n", + mrioc->prev_reset_result, + mpi3mr_reset_rc_name(reset_reason)); + return mrioc->prev_reset_result; + } + ioc_info(mrioc, "controller reset is triggered by %s\n", + mpi3mr_reset_rc_name(reset_reason)); + + mrioc->device_refresh_on = 0; + mrioc->reset_in_progress = 1; + mrioc->stop_bsgs = 1; + mrioc->prev_reset_result = -1; + + if ((!snapdump) && (reset_reason != MPI3MR_RESET_FROM_FAULT_WATCH) && + (reset_reason != MPI3MR_RESET_FROM_FIRMWARE) && + (reset_reason != MPI3MR_RESET_FROM_CIACTIV_FAULT)) { + for (i = 0; i < MPI3_EVENT_NOTIFY_EVENTMASK_WORDS; i++) + mrioc->event_masks[i] = -1; + + dprint_reset(mrioc, "soft_reset_handler: masking events\n"); + mpi3mr_issue_event_notification(mrioc); + } + + mpi3mr_wait_for_host_io(mrioc, MPI3MR_RESET_HOST_IOWAIT_TIMEOUT); + + mpi3mr_ioc_disable_intr(mrioc); + + if (snapdump) { + mpi3mr_set_diagsave(mrioc); + retval = mpi3mr_issue_reset(mrioc, + MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT, reset_reason); + if (!retval) { + do { + host_diagnostic = + readl(&mrioc->sysif_regs->host_diagnostic); + if (!(host_diagnostic & + MPI3_SYSIF_HOST_DIAG_SAVE_IN_PROGRESS)) + break; + msleep(100); + } while (--timeout); + } + } + + retval = mpi3mr_issue_reset(mrioc, + MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET, reset_reason); + if (retval) { + ioc_err(mrioc, "Failed to issue soft reset to the ioc\n"); + goto out; + } + if (mrioc->num_io_throttle_group != + mrioc->facts.max_io_throttle_group) { + ioc_err(mrioc, + "max io throttle group doesn't match old(%d), new(%d)\n", + mrioc->num_io_throttle_group, + mrioc->facts.max_io_throttle_group); + retval = -EPERM; + goto out; + } + + mpi3mr_flush_delayed_cmd_lists(mrioc); + mpi3mr_flush_drv_cmds(mrioc); + bitmap_clear(mrioc->devrem_bitmap, 0, MPI3MR_NUM_DEVRMCMD); + bitmap_clear(mrioc->removepend_bitmap, 0, + mrioc->dev_handle_bitmap_bits); + bitmap_clear(mrioc->evtack_cmds_bitmap, 0, MPI3MR_NUM_EVTACKCMD); + mpi3mr_flush_host_io(mrioc); + mpi3mr_cleanup_fwevt_list(mrioc); + mpi3mr_invalidate_devhandles(mrioc); + mpi3mr_free_enclosure_list(mrioc); + + if (mrioc->prepare_for_reset) { + mrioc->prepare_for_reset = 0; + mrioc->prepare_for_reset_timeout_counter = 0; + } + mpi3mr_memset_buffers(mrioc); + retval = mpi3mr_reinit_ioc(mrioc, 0); + if (retval) { + pr_err(IOCNAME "reinit after soft reset failed: reason %d\n", + mrioc->name, reset_reason); + goto out; + } + ssleep(MPI3MR_RESET_TOPOLOGY_SETTLE_TIME); + +out: + if (!retval) { + mrioc->diagsave_timeout = 0; + mrioc->reset_in_progress = 0; + mrioc->pel_abort_requested = 0; + if (mrioc->pel_enabled) { + mrioc->pel_cmds.retry_count = 0; + mpi3mr_pel_wait_post(mrioc, &mrioc->pel_cmds); + } + + mrioc->device_refresh_on = 0; + + mrioc->ts_update_counter = 0; + spin_lock_irqsave(&mrioc->watchdog_lock, flags); + if (mrioc->watchdog_work_q) + queue_delayed_work(mrioc->watchdog_work_q, + &mrioc->watchdog_work, + msecs_to_jiffies(MPI3MR_WATCHDOG_INTERVAL)); + spin_unlock_irqrestore(&mrioc->watchdog_lock, flags); + mrioc->stop_bsgs = 0; + if (mrioc->pel_enabled) + atomic64_inc(&event_counter); + } else { + mpi3mr_issue_reset(mrioc, + MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT, reset_reason); + mrioc->device_refresh_on = 0; + mrioc->unrecoverable = 1; + mrioc->reset_in_progress = 0; + retval = -1; + mpi3mr_flush_cmds_for_unrecovered_controller(mrioc); + } + mrioc->prev_reset_result = retval; + mutex_unlock(&mrioc->reset_mutex); + ioc_info(mrioc, "controller reset is %s\n", + ((retval == 0) ? "successful" : "failed")); + return retval; +} + + +/** + * mpi3mr_free_config_dma_memory - free memory for config page + * @mrioc: Adapter instance reference + * @mem_desc: memory descriptor structure + * + * Check whether the size of the buffer specified by the memory + * descriptor is greater than the default page size if so then + * free the memory pointed by the descriptor. + * + * Return: Nothing. + */ +static void mpi3mr_free_config_dma_memory(struct mpi3mr_ioc *mrioc, + struct dma_memory_desc *mem_desc) +{ + if ((mem_desc->size > mrioc->cfg_page_sz) && mem_desc->addr) { + dma_free_coherent(&mrioc->pdev->dev, mem_desc->size, + mem_desc->addr, mem_desc->dma_addr); + mem_desc->addr = NULL; + } +} + +/** + * mpi3mr_alloc_config_dma_memory - Alloc memory for config page + * @mrioc: Adapter instance reference + * @mem_desc: Memory descriptor to hold dma memory info + * + * This function allocates new dmaable memory or provides the + * default config page dmaable memory based on the memory size + * described by the descriptor. + * + * Return: 0 on success, non-zero on failure. + */ +static int mpi3mr_alloc_config_dma_memory(struct mpi3mr_ioc *mrioc, + struct dma_memory_desc *mem_desc) +{ + if (mem_desc->size > mrioc->cfg_page_sz) { + mem_desc->addr = dma_alloc_coherent(&mrioc->pdev->dev, + mem_desc->size, &mem_desc->dma_addr, GFP_KERNEL); + if (!mem_desc->addr) + return -ENOMEM; + } else { + mem_desc->addr = mrioc->cfg_page; + mem_desc->dma_addr = mrioc->cfg_page_dma; + memset(mem_desc->addr, 0, mrioc->cfg_page_sz); + } + return 0; +} + +/** + * mpi3mr_post_cfg_req - Issue config requests and wait + * @mrioc: Adapter instance reference + * @cfg_req: Configuration request + * @timeout: Timeout in seconds + * @ioc_status: Pointer to return ioc status + * + * A generic function for posting MPI3 configuration request to + * the firmware. This blocks for the completion of request for + * timeout seconds and if the request times out this function + * faults the controller with proper reason code. + * + * On successful completion of the request this function returns + * appropriate ioc status from the firmware back to the caller. + * + * Return: 0 on success, non-zero on failure. + */ +static int mpi3mr_post_cfg_req(struct mpi3mr_ioc *mrioc, + struct mpi3_config_request *cfg_req, int timeout, u16 *ioc_status) +{ + int retval = 0; + + mutex_lock(&mrioc->cfg_cmds.mutex); + if (mrioc->cfg_cmds.state & MPI3MR_CMD_PENDING) { + retval = -1; + ioc_err(mrioc, "sending config request failed due to command in use\n"); + mutex_unlock(&mrioc->cfg_cmds.mutex); + goto out; + } + mrioc->cfg_cmds.state = MPI3MR_CMD_PENDING; + mrioc->cfg_cmds.is_waiting = 1; + mrioc->cfg_cmds.callback = NULL; + mrioc->cfg_cmds.ioc_status = 0; + mrioc->cfg_cmds.ioc_loginfo = 0; + + cfg_req->host_tag = cpu_to_le16(MPI3MR_HOSTTAG_CFG_CMDS); + cfg_req->function = MPI3_FUNCTION_CONFIG; + + init_completion(&mrioc->cfg_cmds.done); + dprint_cfg_info(mrioc, "posting config request\n"); + if (mrioc->logging_level & MPI3_DEBUG_CFG_INFO) + dprint_dump(cfg_req, sizeof(struct mpi3_config_request), + "mpi3_cfg_req"); + retval = mpi3mr_admin_request_post(mrioc, cfg_req, sizeof(*cfg_req), 1); + if (retval) { + ioc_err(mrioc, "posting config request failed\n"); + goto out_unlock; + } + wait_for_completion_timeout(&mrioc->cfg_cmds.done, (timeout * HZ)); + if (!(mrioc->cfg_cmds.state & MPI3MR_CMD_COMPLETE)) { + mpi3mr_check_rh_fault_ioc(mrioc, + MPI3MR_RESET_FROM_CFG_REQ_TIMEOUT); + ioc_err(mrioc, "config request timed out\n"); + retval = -1; + goto out_unlock; + } + *ioc_status = mrioc->cfg_cmds.ioc_status & MPI3_IOCSTATUS_STATUS_MASK; + if ((*ioc_status) != MPI3_IOCSTATUS_SUCCESS) + dprint_cfg_err(mrioc, + "cfg_page request returned with ioc_status(0x%04x), log_info(0x%08x)\n", + *ioc_status, mrioc->cfg_cmds.ioc_loginfo); + +out_unlock: + mrioc->cfg_cmds.state = MPI3MR_CMD_NOTUSED; + mutex_unlock(&mrioc->cfg_cmds.mutex); + +out: + return retval; +} + +/** + * mpi3mr_process_cfg_req - config page request processor + * @mrioc: Adapter instance reference + * @cfg_req: Configuration request + * @cfg_hdr: Configuration page header + * @timeout: Timeout in seconds + * @ioc_status: Pointer to return ioc status + * @cfg_buf: Memory pointer to copy config page or header + * @cfg_buf_sz: Size of the memory to get config page or header + * + * This is handler for config page read, write and config page + * header read operations. + * + * This function expects the cfg_req to be populated with page + * type, page number, action for the header read and with page + * address for all other operations. + * + * The cfg_hdr can be passed as null for reading required header + * details for read/write pages the cfg_hdr should point valid + * configuration page header. + * + * This allocates dmaable memory based on the size of the config + * buffer and set the SGE of the cfg_req. + * + * For write actions, the config page data has to be passed in + * the cfg_buf and size of the data has to be mentioned in the + * cfg_buf_sz. + * + * For read/header actions, on successful completion of the + * request with successful ioc_status the data will be copied + * into the cfg_buf limited to a minimum of actual page size and + * cfg_buf_sz + * + * + * Return: 0 on success, non-zero on failure. + */ +static int mpi3mr_process_cfg_req(struct mpi3mr_ioc *mrioc, + struct mpi3_config_request *cfg_req, + struct mpi3_config_page_header *cfg_hdr, int timeout, u16 *ioc_status, + void *cfg_buf, u32 cfg_buf_sz) +{ + struct dma_memory_desc mem_desc; + int retval = -1; + u8 invalid_action = 0; + u8 sgl_flags = MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST; + + memset(&mem_desc, 0, sizeof(struct dma_memory_desc)); + + if (cfg_req->action == MPI3_CONFIG_ACTION_PAGE_HEADER) + mem_desc.size = sizeof(struct mpi3_config_page_header); + else { + if (!cfg_hdr) { + ioc_err(mrioc, "null config header passed for config action(%d), page_type(0x%02x), page_num(%d)\n", + cfg_req->action, cfg_req->page_type, + cfg_req->page_number); + goto out; + } + switch (cfg_hdr->page_attribute & MPI3_CONFIG_PAGEATTR_MASK) { + case MPI3_CONFIG_PAGEATTR_READ_ONLY: + if (cfg_req->action + != MPI3_CONFIG_ACTION_READ_CURRENT) + invalid_action = 1; + break; + case MPI3_CONFIG_PAGEATTR_CHANGEABLE: + if ((cfg_req->action == + MPI3_CONFIG_ACTION_READ_PERSISTENT) || + (cfg_req->action == + MPI3_CONFIG_ACTION_WRITE_PERSISTENT)) + invalid_action = 1; + break; + case MPI3_CONFIG_PAGEATTR_PERSISTENT: + default: + break; + } + if (invalid_action) { + ioc_err(mrioc, + "config action(%d) is not allowed for page_type(0x%02x), page_num(%d) with page_attribute(0x%02x)\n", + cfg_req->action, cfg_req->page_type, + cfg_req->page_number, cfg_hdr->page_attribute); + goto out; + } + mem_desc.size = le16_to_cpu(cfg_hdr->page_length) * 4; + cfg_req->page_length = cfg_hdr->page_length; + cfg_req->page_version = cfg_hdr->page_version; + } + if (mpi3mr_alloc_config_dma_memory(mrioc, &mem_desc)) + goto out; + + mpi3mr_add_sg_single(&cfg_req->sgl, sgl_flags, mem_desc.size, + mem_desc.dma_addr); + + if ((cfg_req->action == MPI3_CONFIG_ACTION_WRITE_PERSISTENT) || + (cfg_req->action == MPI3_CONFIG_ACTION_WRITE_CURRENT)) { + memcpy(mem_desc.addr, cfg_buf, min_t(u16, mem_desc.size, + cfg_buf_sz)); + dprint_cfg_info(mrioc, "config buffer to be written\n"); + if (mrioc->logging_level & MPI3_DEBUG_CFG_INFO) + dprint_dump(mem_desc.addr, mem_desc.size, "cfg_buf"); + } + + if (mpi3mr_post_cfg_req(mrioc, cfg_req, timeout, ioc_status)) + goto out; + + retval = 0; + if ((*ioc_status == MPI3_IOCSTATUS_SUCCESS) && + (cfg_req->action != MPI3_CONFIG_ACTION_WRITE_PERSISTENT) && + (cfg_req->action != MPI3_CONFIG_ACTION_WRITE_CURRENT)) { + memcpy(cfg_buf, mem_desc.addr, min_t(u16, mem_desc.size, + cfg_buf_sz)); + dprint_cfg_info(mrioc, "config buffer read\n"); + if (mrioc->logging_level & MPI3_DEBUG_CFG_INFO) + dprint_dump(mem_desc.addr, mem_desc.size, "cfg_buf"); + } + +out: + mpi3mr_free_config_dma_memory(mrioc, &mem_desc); + return retval; +} + +/** + * mpi3mr_cfg_get_dev_pg0 - Read current device page0 + * @mrioc: Adapter instance reference + * @ioc_status: Pointer to return ioc status + * @dev_pg0: Pointer to return device page 0 + * @pg_sz: Size of the memory allocated to the page pointer + * @form: The form to be used for addressing the page + * @form_spec: Form specific information like device handle + * + * This is handler for config page read for a specific device + * page0. The ioc_status has the controller returned ioc_status. + * This routine doesn't check ioc_status to decide whether the + * page read is success or not and it is the callers + * responsibility. + * + * Return: 0 on success, non-zero on failure. + */ +int mpi3mr_cfg_get_dev_pg0(struct mpi3mr_ioc *mrioc, u16 *ioc_status, + struct mpi3_device_page0 *dev_pg0, u16 pg_sz, u32 form, u32 form_spec) +{ + struct mpi3_config_page_header cfg_hdr; + struct mpi3_config_request cfg_req; + u32 page_address; + + memset(dev_pg0, 0, pg_sz); + memset(&cfg_hdr, 0, sizeof(cfg_hdr)); + memset(&cfg_req, 0, sizeof(cfg_req)); + + cfg_req.function = MPI3_FUNCTION_CONFIG; + cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER; + cfg_req.page_type = MPI3_CONFIG_PAGETYPE_DEVICE; + cfg_req.page_number = 0; + cfg_req.page_address = 0; + + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL, + MPI3MR_INTADMCMD_TIMEOUT, ioc_status, &cfg_hdr, sizeof(cfg_hdr))) { + ioc_err(mrioc, "device page0 header read failed\n"); + goto out_failed; + } + if (*ioc_status != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, "device page0 header read failed with ioc_status(0x%04x)\n", + *ioc_status); + goto out_failed; + } + cfg_req.action = MPI3_CONFIG_ACTION_READ_CURRENT; + page_address = ((form & MPI3_DEVICE_PGAD_FORM_MASK) | + (form_spec & MPI3_DEVICE_PGAD_HANDLE_MASK)); + cfg_req.page_address = cpu_to_le32(page_address); + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr, + MPI3MR_INTADMCMD_TIMEOUT, ioc_status, dev_pg0, pg_sz)) { + ioc_err(mrioc, "device page0 read failed\n"); + goto out_failed; + } + return 0; +out_failed: + return -1; +} + + +/** + * mpi3mr_cfg_get_sas_phy_pg0 - Read current SAS Phy page0 + * @mrioc: Adapter instance reference + * @ioc_status: Pointer to return ioc status + * @phy_pg0: Pointer to return SAS Phy page 0 + * @pg_sz: Size of the memory allocated to the page pointer + * @form: The form to be used for addressing the page + * @form_spec: Form specific information like phy number + * + * This is handler for config page read for a specific SAS Phy + * page0. The ioc_status has the controller returned ioc_status. + * This routine doesn't check ioc_status to decide whether the + * page read is success or not and it is the callers + * responsibility. + * + * Return: 0 on success, non-zero on failure. + */ +int mpi3mr_cfg_get_sas_phy_pg0(struct mpi3mr_ioc *mrioc, u16 *ioc_status, + struct mpi3_sas_phy_page0 *phy_pg0, u16 pg_sz, u32 form, + u32 form_spec) +{ + struct mpi3_config_page_header cfg_hdr; + struct mpi3_config_request cfg_req; + u32 page_address; + + memset(phy_pg0, 0, pg_sz); + memset(&cfg_hdr, 0, sizeof(cfg_hdr)); + memset(&cfg_req, 0, sizeof(cfg_req)); + + cfg_req.function = MPI3_FUNCTION_CONFIG; + cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER; + cfg_req.page_type = MPI3_CONFIG_PAGETYPE_SAS_PHY; + cfg_req.page_number = 0; + cfg_req.page_address = 0; + + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL, + MPI3MR_INTADMCMD_TIMEOUT, ioc_status, &cfg_hdr, sizeof(cfg_hdr))) { + ioc_err(mrioc, "sas phy page0 header read failed\n"); + goto out_failed; + } + if (*ioc_status != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, "sas phy page0 header read failed with ioc_status(0x%04x)\n", + *ioc_status); + goto out_failed; + } + cfg_req.action = MPI3_CONFIG_ACTION_READ_CURRENT; + page_address = ((form & MPI3_SAS_PHY_PGAD_FORM_MASK) | + (form_spec & MPI3_SAS_PHY_PGAD_PHY_NUMBER_MASK)); + cfg_req.page_address = cpu_to_le32(page_address); + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr, + MPI3MR_INTADMCMD_TIMEOUT, ioc_status, phy_pg0, pg_sz)) { + ioc_err(mrioc, "sas phy page0 read failed\n"); + goto out_failed; + } + return 0; +out_failed: + return -1; +} + +/** + * mpi3mr_cfg_get_sas_phy_pg1 - Read current SAS Phy page1 + * @mrioc: Adapter instance reference + * @ioc_status: Pointer to return ioc status + * @phy_pg1: Pointer to return SAS Phy page 1 + * @pg_sz: Size of the memory allocated to the page pointer + * @form: The form to be used for addressing the page + * @form_spec: Form specific information like phy number + * + * This is handler for config page read for a specific SAS Phy + * page1. The ioc_status has the controller returned ioc_status. + * This routine doesn't check ioc_status to decide whether the + * page read is success or not and it is the callers + * responsibility. + * + * Return: 0 on success, non-zero on failure. + */ +int mpi3mr_cfg_get_sas_phy_pg1(struct mpi3mr_ioc *mrioc, u16 *ioc_status, + struct mpi3_sas_phy_page1 *phy_pg1, u16 pg_sz, u32 form, + u32 form_spec) +{ + struct mpi3_config_page_header cfg_hdr; + struct mpi3_config_request cfg_req; + u32 page_address; + + memset(phy_pg1, 0, pg_sz); + memset(&cfg_hdr, 0, sizeof(cfg_hdr)); + memset(&cfg_req, 0, sizeof(cfg_req)); + + cfg_req.function = MPI3_FUNCTION_CONFIG; + cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER; + cfg_req.page_type = MPI3_CONFIG_PAGETYPE_SAS_PHY; + cfg_req.page_number = 1; + cfg_req.page_address = 0; + + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL, + MPI3MR_INTADMCMD_TIMEOUT, ioc_status, &cfg_hdr, sizeof(cfg_hdr))) { + ioc_err(mrioc, "sas phy page1 header read failed\n"); + goto out_failed; + } + if (*ioc_status != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, "sas phy page1 header read failed with ioc_status(0x%04x)\n", + *ioc_status); + goto out_failed; + } + cfg_req.action = MPI3_CONFIG_ACTION_READ_CURRENT; + page_address = ((form & MPI3_SAS_PHY_PGAD_FORM_MASK) | + (form_spec & MPI3_SAS_PHY_PGAD_PHY_NUMBER_MASK)); + cfg_req.page_address = cpu_to_le32(page_address); + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr, + MPI3MR_INTADMCMD_TIMEOUT, ioc_status, phy_pg1, pg_sz)) { + ioc_err(mrioc, "sas phy page1 read failed\n"); + goto out_failed; + } + return 0; +out_failed: + return -1; +} + + +/** + * mpi3mr_cfg_get_sas_exp_pg0 - Read current SAS Expander page0 + * @mrioc: Adapter instance reference + * @ioc_status: Pointer to return ioc status + * @exp_pg0: Pointer to return SAS Expander page 0 + * @pg_sz: Size of the memory allocated to the page pointer + * @form: The form to be used for addressing the page + * @form_spec: Form specific information like device handle + * + * This is handler for config page read for a specific SAS + * Expander page0. The ioc_status has the controller returned + * ioc_status. This routine doesn't check ioc_status to decide + * whether the page read is success or not and it is the callers + * responsibility. + * + * Return: 0 on success, non-zero on failure. + */ +int mpi3mr_cfg_get_sas_exp_pg0(struct mpi3mr_ioc *mrioc, u16 *ioc_status, + struct mpi3_sas_expander_page0 *exp_pg0, u16 pg_sz, u32 form, + u32 form_spec) +{ + struct mpi3_config_page_header cfg_hdr; + struct mpi3_config_request cfg_req; + u32 page_address; + + memset(exp_pg0, 0, pg_sz); + memset(&cfg_hdr, 0, sizeof(cfg_hdr)); + memset(&cfg_req, 0, sizeof(cfg_req)); + + cfg_req.function = MPI3_FUNCTION_CONFIG; + cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER; + cfg_req.page_type = MPI3_CONFIG_PAGETYPE_SAS_EXPANDER; + cfg_req.page_number = 0; + cfg_req.page_address = 0; + + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL, + MPI3MR_INTADMCMD_TIMEOUT, ioc_status, &cfg_hdr, sizeof(cfg_hdr))) { + ioc_err(mrioc, "expander page0 header read failed\n"); + goto out_failed; + } + if (*ioc_status != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, "expander page0 header read failed with ioc_status(0x%04x)\n", + *ioc_status); + goto out_failed; + } + cfg_req.action = MPI3_CONFIG_ACTION_READ_CURRENT; + page_address = ((form & MPI3_SAS_EXPAND_PGAD_FORM_MASK) | + (form_spec & (MPI3_SAS_EXPAND_PGAD_PHYNUM_MASK | + MPI3_SAS_EXPAND_PGAD_HANDLE_MASK))); + cfg_req.page_address = cpu_to_le32(page_address); + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr, + MPI3MR_INTADMCMD_TIMEOUT, ioc_status, exp_pg0, pg_sz)) { + ioc_err(mrioc, "expander page0 read failed\n"); + goto out_failed; + } + return 0; +out_failed: + return -1; +} + +/** + * mpi3mr_cfg_get_sas_exp_pg1 - Read current SAS Expander page1 + * @mrioc: Adapter instance reference + * @ioc_status: Pointer to return ioc status + * @exp_pg1: Pointer to return SAS Expander page 1 + * @pg_sz: Size of the memory allocated to the page pointer + * @form: The form to be used for addressing the page + * @form_spec: Form specific information like phy number + * + * This is handler for config page read for a specific SAS + * Expander page1. The ioc_status has the controller returned + * ioc_status. This routine doesn't check ioc_status to decide + * whether the page read is success or not and it is the callers + * responsibility. + * + * Return: 0 on success, non-zero on failure. + */ +int mpi3mr_cfg_get_sas_exp_pg1(struct mpi3mr_ioc *mrioc, u16 *ioc_status, + struct mpi3_sas_expander_page1 *exp_pg1, u16 pg_sz, u32 form, + u32 form_spec) +{ + struct mpi3_config_page_header cfg_hdr; + struct mpi3_config_request cfg_req; + u32 page_address; + + memset(exp_pg1, 0, pg_sz); + memset(&cfg_hdr, 0, sizeof(cfg_hdr)); + memset(&cfg_req, 0, sizeof(cfg_req)); + + cfg_req.function = MPI3_FUNCTION_CONFIG; + cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER; + cfg_req.page_type = MPI3_CONFIG_PAGETYPE_SAS_EXPANDER; + cfg_req.page_number = 1; + cfg_req.page_address = 0; + + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL, + MPI3MR_INTADMCMD_TIMEOUT, ioc_status, &cfg_hdr, sizeof(cfg_hdr))) { + ioc_err(mrioc, "expander page1 header read failed\n"); + goto out_failed; + } + if (*ioc_status != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, "expander page1 header read failed with ioc_status(0x%04x)\n", + *ioc_status); + goto out_failed; + } + cfg_req.action = MPI3_CONFIG_ACTION_READ_CURRENT; + page_address = ((form & MPI3_SAS_EXPAND_PGAD_FORM_MASK) | + (form_spec & (MPI3_SAS_EXPAND_PGAD_PHYNUM_MASK | + MPI3_SAS_EXPAND_PGAD_HANDLE_MASK))); + cfg_req.page_address = cpu_to_le32(page_address); + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr, + MPI3MR_INTADMCMD_TIMEOUT, ioc_status, exp_pg1, pg_sz)) { + ioc_err(mrioc, "expander page1 read failed\n"); + goto out_failed; + } + return 0; +out_failed: + return -1; +} + +/** + * mpi3mr_cfg_get_enclosure_pg0 - Read current Enclosure page0 + * @mrioc: Adapter instance reference + * @ioc_status: Pointer to return ioc status + * @encl_pg0: Pointer to return Enclosure page 0 + * @pg_sz: Size of the memory allocated to the page pointer + * @form: The form to be used for addressing the page + * @form_spec: Form specific information like device handle + * + * This is handler for config page read for a specific Enclosure + * page0. The ioc_status has the controller returned ioc_status. + * This routine doesn't check ioc_status to decide whether the + * page read is success or not and it is the callers + * responsibility. + * + * Return: 0 on success, non-zero on failure. + */ +int mpi3mr_cfg_get_enclosure_pg0(struct mpi3mr_ioc *mrioc, u16 *ioc_status, + struct mpi3_enclosure_page0 *encl_pg0, u16 pg_sz, u32 form, + u32 form_spec) +{ + struct mpi3_config_page_header cfg_hdr; + struct mpi3_config_request cfg_req; + u32 page_address; + + memset(encl_pg0, 0, pg_sz); + memset(&cfg_hdr, 0, sizeof(cfg_hdr)); + memset(&cfg_req, 0, sizeof(cfg_req)); + + cfg_req.function = MPI3_FUNCTION_CONFIG; + cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER; + cfg_req.page_type = MPI3_CONFIG_PAGETYPE_ENCLOSURE; + cfg_req.page_number = 0; + cfg_req.page_address = 0; + + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL, + MPI3MR_INTADMCMD_TIMEOUT, ioc_status, &cfg_hdr, sizeof(cfg_hdr))) { + ioc_err(mrioc, "enclosure page0 header read failed\n"); + goto out_failed; + } + if (*ioc_status != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, "enclosure page0 header read failed with ioc_status(0x%04x)\n", + *ioc_status); + goto out_failed; + } + cfg_req.action = MPI3_CONFIG_ACTION_READ_CURRENT; + page_address = ((form & MPI3_ENCLOS_PGAD_FORM_MASK) | + (form_spec & MPI3_ENCLOS_PGAD_HANDLE_MASK)); + cfg_req.page_address = cpu_to_le32(page_address); + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr, + MPI3MR_INTADMCMD_TIMEOUT, ioc_status, encl_pg0, pg_sz)) { + ioc_err(mrioc, "enclosure page0 read failed\n"); + goto out_failed; + } + return 0; +out_failed: + return -1; +} + + +/** + * mpi3mr_cfg_get_sas_io_unit_pg0 - Read current SASIOUnit page0 + * @mrioc: Adapter instance reference + * @sas_io_unit_pg0: Pointer to return SAS IO Unit page 0 + * @pg_sz: Size of the memory allocated to the page pointer + * + * This is handler for config page read for the SAS IO Unit + * page0. This routine checks ioc_status to decide whether the + * page read is success or not. + * + * Return: 0 on success, non-zero on failure. + */ +int mpi3mr_cfg_get_sas_io_unit_pg0(struct mpi3mr_ioc *mrioc, + struct mpi3_sas_io_unit_page0 *sas_io_unit_pg0, u16 pg_sz) +{ + struct mpi3_config_page_header cfg_hdr; + struct mpi3_config_request cfg_req; + u16 ioc_status = 0; + + memset(sas_io_unit_pg0, 0, pg_sz); + memset(&cfg_hdr, 0, sizeof(cfg_hdr)); + memset(&cfg_req, 0, sizeof(cfg_req)); + + cfg_req.function = MPI3_FUNCTION_CONFIG; + cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER; + cfg_req.page_type = MPI3_CONFIG_PAGETYPE_SAS_IO_UNIT; + cfg_req.page_number = 0; + cfg_req.page_address = 0; + + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL, + MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, &cfg_hdr, sizeof(cfg_hdr))) { + ioc_err(mrioc, "sas io unit page0 header read failed\n"); + goto out_failed; + } + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, "sas io unit page0 header read failed with ioc_status(0x%04x)\n", + ioc_status); + goto out_failed; + } + cfg_req.action = MPI3_CONFIG_ACTION_READ_CURRENT; + + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr, + MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, sas_io_unit_pg0, pg_sz)) { + ioc_err(mrioc, "sas io unit page0 read failed\n"); + goto out_failed; + } + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, "sas io unit page0 read failed with ioc_status(0x%04x)\n", + ioc_status); + goto out_failed; + } + return 0; +out_failed: + return -1; +} + +/** + * mpi3mr_cfg_get_sas_io_unit_pg1 - Read current SASIOUnit page1 + * @mrioc: Adapter instance reference + * @sas_io_unit_pg1: Pointer to return SAS IO Unit page 1 + * @pg_sz: Size of the memory allocated to the page pointer + * + * This is handler for config page read for the SAS IO Unit + * page1. This routine checks ioc_status to decide whether the + * page read is success or not. + * + * Return: 0 on success, non-zero on failure. + */ +int mpi3mr_cfg_get_sas_io_unit_pg1(struct mpi3mr_ioc *mrioc, + struct mpi3_sas_io_unit_page1 *sas_io_unit_pg1, u16 pg_sz) +{ + struct mpi3_config_page_header cfg_hdr; + struct mpi3_config_request cfg_req; + u16 ioc_status = 0; + + memset(sas_io_unit_pg1, 0, pg_sz); + memset(&cfg_hdr, 0, sizeof(cfg_hdr)); + memset(&cfg_req, 0, sizeof(cfg_req)); + + cfg_req.function = MPI3_FUNCTION_CONFIG; + cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER; + cfg_req.page_type = MPI3_CONFIG_PAGETYPE_SAS_IO_UNIT; + cfg_req.page_number = 1; + cfg_req.page_address = 0; + + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL, + MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, &cfg_hdr, sizeof(cfg_hdr))) { + ioc_err(mrioc, "sas io unit page1 header read failed\n"); + goto out_failed; + } + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, "sas io unit page1 header read failed with ioc_status(0x%04x)\n", + ioc_status); + goto out_failed; + } + cfg_req.action = MPI3_CONFIG_ACTION_READ_CURRENT; + + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr, + MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, sas_io_unit_pg1, pg_sz)) { + ioc_err(mrioc, "sas io unit page1 read failed\n"); + goto out_failed; + } + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, "sas io unit page1 read failed with ioc_status(0x%04x)\n", + ioc_status); + goto out_failed; + } + return 0; +out_failed: + return -1; +} + +/** + * mpi3mr_cfg_set_sas_io_unit_pg1 - Write SASIOUnit page1 + * @mrioc: Adapter instance reference + * @sas_io_unit_pg1: Pointer to the SAS IO Unit page 1 to write + * @pg_sz: Size of the memory allocated to the page pointer + * + * This is handler for config page write for the SAS IO Unit + * page1. This routine checks ioc_status to decide whether the + * page read is success or not. This will modify both current + * and persistent page. + * + * Return: 0 on success, non-zero on failure. + */ +int mpi3mr_cfg_set_sas_io_unit_pg1(struct mpi3mr_ioc *mrioc, + struct mpi3_sas_io_unit_page1 *sas_io_unit_pg1, u16 pg_sz) +{ + struct mpi3_config_page_header cfg_hdr; + struct mpi3_config_request cfg_req; + u16 ioc_status = 0; + + memset(&cfg_hdr, 0, sizeof(cfg_hdr)); + memset(&cfg_req, 0, sizeof(cfg_req)); + + cfg_req.function = MPI3_FUNCTION_CONFIG; + cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER; + cfg_req.page_type = MPI3_CONFIG_PAGETYPE_SAS_IO_UNIT; + cfg_req.page_number = 1; + cfg_req.page_address = 0; + + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL, + MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, &cfg_hdr, sizeof(cfg_hdr))) { + ioc_err(mrioc, "sas io unit page1 header read failed\n"); + goto out_failed; + } + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, "sas io unit page1 header read failed with ioc_status(0x%04x)\n", + ioc_status); + goto out_failed; + } + cfg_req.action = MPI3_CONFIG_ACTION_WRITE_CURRENT; + + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr, + MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, sas_io_unit_pg1, pg_sz)) { + ioc_err(mrioc, "sas io unit page1 write current failed\n"); + goto out_failed; + } + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, "sas io unit page1 write current failed with ioc_status(0x%04x)\n", + ioc_status); + goto out_failed; + } + + cfg_req.action = MPI3_CONFIG_ACTION_WRITE_PERSISTENT; + + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr, + MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, sas_io_unit_pg1, pg_sz)) { + ioc_err(mrioc, "sas io unit page1 write persistent failed\n"); + goto out_failed; + } + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, "sas io unit page1 write persistent failed with ioc_status(0x%04x)\n", + ioc_status); + goto out_failed; + } + return 0; +out_failed: + return -1; +} + +/** + * mpi3mr_cfg_get_driver_pg1 - Read current Driver page1 + * @mrioc: Adapter instance reference + * @driver_pg1: Pointer to return Driver page 1 + * @pg_sz: Size of the memory allocated to the page pointer + * + * This is handler for config page read for the Driver page1. + * This routine checks ioc_status to decide whether the page + * read is success or not. + * + * Return: 0 on success, non-zero on failure. + */ +int mpi3mr_cfg_get_driver_pg1(struct mpi3mr_ioc *mrioc, + struct mpi3_driver_page1 *driver_pg1, u16 pg_sz) +{ + struct mpi3_config_page_header cfg_hdr; + struct mpi3_config_request cfg_req; + u16 ioc_status = 0; + + memset(driver_pg1, 0, pg_sz); + memset(&cfg_hdr, 0, sizeof(cfg_hdr)); + memset(&cfg_req, 0, sizeof(cfg_req)); + + cfg_req.function = MPI3_FUNCTION_CONFIG; + cfg_req.action = MPI3_CONFIG_ACTION_PAGE_HEADER; + cfg_req.page_type = MPI3_CONFIG_PAGETYPE_DRIVER; + cfg_req.page_number = 1; + cfg_req.page_address = 0; + + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, NULL, + MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, &cfg_hdr, sizeof(cfg_hdr))) { + ioc_err(mrioc, "driver page1 header read failed\n"); + goto out_failed; + } + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, "driver page1 header read failed with ioc_status(0x%04x)\n", + ioc_status); + goto out_failed; + } + cfg_req.action = MPI3_CONFIG_ACTION_READ_CURRENT; + + if (mpi3mr_process_cfg_req(mrioc, &cfg_req, &cfg_hdr, + MPI3MR_INTADMCMD_TIMEOUT, &ioc_status, driver_pg1, pg_sz)) { + ioc_err(mrioc, "driver page1 read failed\n"); + goto out_failed; + } + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, "driver page1 read failed with ioc_status(0x%04x)\n", + ioc_status); + goto out_failed; + } + return 0; +out_failed: + return -1; +} |