diff options
Diffstat (limited to 'drivers/scsi/mpi3mr/mpi3mr_transport.c')
| -rw-r--r-- | drivers/scsi/mpi3mr/mpi3mr_transport.c | 3291 |
1 files changed, 3291 insertions, 0 deletions
diff --git a/drivers/scsi/mpi3mr/mpi3mr_transport.c b/drivers/scsi/mpi3mr/mpi3mr_transport.c new file mode 100644 index 000000000..82b55e955 --- /dev/null +++ b/drivers/scsi/mpi3mr/mpi3mr_transport.c @@ -0,0 +1,3291 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Driver for Broadcom MPI3 Storage Controllers + * + * Copyright (C) 2017-2023 Broadcom Inc. + * (mailto: mpi3mr-linuxdrv.pdl@broadcom.com) + * + */ + +#include "mpi3mr.h" + +/** + * mpi3mr_post_transport_req - Issue transport requests and wait + * @mrioc: Adapter instance reference + * @request: Properly populated MPI3 request + * @request_sz: Size of the MPI3 request + * @reply: Pointer to return MPI3 reply + * @reply_sz: Size of the MPI3 reply buffer + * @timeout: Timeout in seconds + * @ioc_status: Pointer to return ioc status + * + * A generic function for posting MPI3 requests from the SAS + * transport layer that uses transport command infrastructure. + * This blocks for the completion of request for timeout seconds + * and if the request times out this function faults the + * controller with proper reason code. + * + * On successful completion of the request this function returns + * appropriate ioc status from the firmware back to the caller. + * + * Return: 0 on success, non-zero on failure. + */ +static int mpi3mr_post_transport_req(struct mpi3mr_ioc *mrioc, void *request, + u16 request_sz, void *reply, u16 reply_sz, int timeout, + u16 *ioc_status) +{ + int retval = 0; + + mutex_lock(&mrioc->transport_cmds.mutex); + if (mrioc->transport_cmds.state & MPI3MR_CMD_PENDING) { + retval = -1; + ioc_err(mrioc, "sending transport request failed due to command in use\n"); + mutex_unlock(&mrioc->transport_cmds.mutex); + goto out; + } + mrioc->transport_cmds.state = MPI3MR_CMD_PENDING; + mrioc->transport_cmds.is_waiting = 1; + mrioc->transport_cmds.callback = NULL; + mrioc->transport_cmds.ioc_status = 0; + mrioc->transport_cmds.ioc_loginfo = 0; + + init_completion(&mrioc->transport_cmds.done); + dprint_cfg_info(mrioc, "posting transport request\n"); + if (mrioc->logging_level & MPI3_DEBUG_TRANSPORT_INFO) + dprint_dump(request, request_sz, "transport_req"); + retval = mpi3mr_admin_request_post(mrioc, request, request_sz, 1); + if (retval) { + ioc_err(mrioc, "posting transport request failed\n"); + goto out_unlock; + } + wait_for_completion_timeout(&mrioc->transport_cmds.done, + (timeout * HZ)); + if (!(mrioc->transport_cmds.state & MPI3MR_CMD_COMPLETE)) { + mpi3mr_check_rh_fault_ioc(mrioc, + MPI3MR_RESET_FROM_SAS_TRANSPORT_TIMEOUT); + ioc_err(mrioc, "transport request timed out\n"); + retval = -1; + goto out_unlock; + } + *ioc_status = mrioc->transport_cmds.ioc_status & + MPI3_IOCSTATUS_STATUS_MASK; + if ((*ioc_status) != MPI3_IOCSTATUS_SUCCESS) + dprint_transport_err(mrioc, + "transport request returned with ioc_status(0x%04x), log_info(0x%08x)\n", + *ioc_status, mrioc->transport_cmds.ioc_loginfo); + + if ((reply) && (mrioc->transport_cmds.state & MPI3MR_CMD_REPLY_VALID)) + memcpy((u8 *)reply, mrioc->transport_cmds.reply, reply_sz); + +out_unlock: + mrioc->transport_cmds.state = MPI3MR_CMD_NOTUSED; + mutex_unlock(&mrioc->transport_cmds.mutex); + +out: + return retval; +} + +/* report manufacture request structure */ +struct rep_manu_request { + u8 smp_frame_type; + u8 function; + u8 reserved; + u8 request_length; +}; + +/* report manufacture reply structure */ +struct rep_manu_reply { + u8 smp_frame_type; /* 0x41 */ + u8 function; /* 0x01 */ + u8 function_result; + u8 response_length; + u16 expander_change_count; + u8 reserved0[2]; + u8 sas_format; + u8 reserved2[3]; + u8 vendor_id[SAS_EXPANDER_VENDOR_ID_LEN]; + u8 product_id[SAS_EXPANDER_PRODUCT_ID_LEN]; + u8 product_rev[SAS_EXPANDER_PRODUCT_REV_LEN]; + u8 component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN]; + u16 component_id; + u8 component_revision_id; + u8 reserved3; + u8 vendor_specific[8]; +}; + +/** + * mpi3mr_report_manufacture - obtain SMP report_manufacture + * @mrioc: Adapter instance reference + * @sas_address: SAS address of the expander device + * @edev: SAS transport layer sas_expander_device object + * @port_id: ID of the HBA port + * + * Fills in the sas_expander_device with manufacturing info. + * + * Return: 0 for success, non-zero for failure. + */ +static int mpi3mr_report_manufacture(struct mpi3mr_ioc *mrioc, + u64 sas_address, struct sas_expander_device *edev, u8 port_id) +{ + struct mpi3_smp_passthrough_request mpi_request; + struct mpi3_smp_passthrough_reply mpi_reply; + struct rep_manu_reply *manufacture_reply; + struct rep_manu_request *manufacture_request; + int rc = 0; + void *psge; + void *data_out = NULL; + dma_addr_t data_out_dma; + dma_addr_t data_in_dma; + size_t data_in_sz; + size_t data_out_sz; + u8 sgl_flags = MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST; + u16 request_sz = sizeof(struct mpi3_smp_passthrough_request); + u16 reply_sz = sizeof(struct mpi3_smp_passthrough_reply); + u16 ioc_status; + u8 *tmp; + + if (mrioc->reset_in_progress) { + ioc_err(mrioc, "%s: host reset in progress!\n", __func__); + return -EFAULT; + } + + data_out_sz = sizeof(struct rep_manu_request); + data_in_sz = sizeof(struct rep_manu_reply); + data_out = dma_alloc_coherent(&mrioc->pdev->dev, + data_out_sz + data_in_sz, &data_out_dma, GFP_KERNEL); + if (!data_out) { + rc = -ENOMEM; + goto out; + } + + data_in_dma = data_out_dma + data_out_sz; + manufacture_reply = data_out + data_out_sz; + + manufacture_request = data_out; + manufacture_request->smp_frame_type = 0x40; + manufacture_request->function = 1; + manufacture_request->reserved = 0; + manufacture_request->request_length = 0; + + memset(&mpi_request, 0, request_sz); + memset(&mpi_reply, 0, reply_sz); + mpi_request.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_TRANSPORT_CMDS); + mpi_request.function = MPI3_FUNCTION_SMP_PASSTHROUGH; + mpi_request.io_unit_port = (u8) port_id; + mpi_request.sas_address = cpu_to_le64(sas_address); + + psge = &mpi_request.request_sge; + mpi3mr_add_sg_single(psge, sgl_flags, data_out_sz, data_out_dma); + + psge = &mpi_request.response_sge; + mpi3mr_add_sg_single(psge, sgl_flags, data_in_sz, data_in_dma); + + dprint_transport_info(mrioc, + "sending report manufacturer SMP request to sas_address(0x%016llx), port(%d)\n", + (unsigned long long)sas_address, port_id); + + rc = mpi3mr_post_transport_req(mrioc, &mpi_request, request_sz, + &mpi_reply, reply_sz, + MPI3MR_INTADMCMD_TIMEOUT, &ioc_status); + if (rc) + goto out; + + dprint_transport_info(mrioc, + "report manufacturer SMP request completed with ioc_status(0x%04x)\n", + ioc_status); + + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { + rc = -EINVAL; + goto out; + } + + dprint_transport_info(mrioc, + "report manufacturer - reply data transfer size(%d)\n", + le16_to_cpu(mpi_reply.response_data_length)); + + if (le16_to_cpu(mpi_reply.response_data_length) != + sizeof(struct rep_manu_reply)) { + rc = -EINVAL; + goto out; + } + + strscpy(edev->vendor_id, manufacture_reply->vendor_id, + SAS_EXPANDER_VENDOR_ID_LEN); + strscpy(edev->product_id, manufacture_reply->product_id, + SAS_EXPANDER_PRODUCT_ID_LEN); + strscpy(edev->product_rev, manufacture_reply->product_rev, + SAS_EXPANDER_PRODUCT_REV_LEN); + edev->level = manufacture_reply->sas_format & 1; + if (edev->level) { + strscpy(edev->component_vendor_id, + manufacture_reply->component_vendor_id, + SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN); + tmp = (u8 *)&manufacture_reply->component_id; + edev->component_id = tmp[0] << 8 | tmp[1]; + edev->component_revision_id = + manufacture_reply->component_revision_id; + } + +out: + if (data_out) + dma_free_coherent(&mrioc->pdev->dev, data_out_sz + data_in_sz, + data_out, data_out_dma); + + return rc; +} + +/** + * __mpi3mr_expander_find_by_handle - expander search by handle + * @mrioc: Adapter instance reference + * @handle: Firmware device handle of the expander + * + * Context: The caller should acquire sas_node_lock + * + * This searches for expander device based on handle, then + * returns the sas_node object. + * + * Return: Expander sas_node object reference or NULL + */ +struct mpi3mr_sas_node *__mpi3mr_expander_find_by_handle(struct mpi3mr_ioc + *mrioc, u16 handle) +{ + struct mpi3mr_sas_node *sas_expander, *r; + + r = NULL; + list_for_each_entry(sas_expander, &mrioc->sas_expander_list, list) { + if (sas_expander->handle != handle) + continue; + r = sas_expander; + goto out; + } + out: + return r; +} + +/** + * mpi3mr_is_expander_device - if device is an expander + * @device_info: Bitfield providing information about the device + * + * Return: 1 if the device is expander device, else 0. + */ +u8 mpi3mr_is_expander_device(u16 device_info) +{ + if ((device_info & MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_MASK) == + MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_EXPANDER) + return 1; + else + return 0; +} + +/** + * mpi3mr_get_sas_address - retrieve sas_address for handle + * @mrioc: Adapter instance reference + * @handle: Firmware device handle + * @sas_address: Address to hold sas address + * + * This function issues device page0 read for a given device + * handle and gets the SAS address and return it back + * + * Return: 0 for success, non-zero for failure + */ +static int mpi3mr_get_sas_address(struct mpi3mr_ioc *mrioc, u16 handle, + u64 *sas_address) +{ + struct mpi3_device_page0 dev_pg0; + u16 ioc_status; + struct mpi3_device0_sas_sata_format *sasinf; + + *sas_address = 0; + + if ((mpi3mr_cfg_get_dev_pg0(mrioc, &ioc_status, &dev_pg0, + sizeof(dev_pg0), MPI3_DEVICE_PGAD_FORM_HANDLE, + handle))) { + ioc_err(mrioc, "%s: device page0 read failed\n", __func__); + return -ENXIO; + } + + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, "device page read failed for handle(0x%04x), with ioc_status(0x%04x) failure at %s:%d/%s()!\n", + handle, ioc_status, __FILE__, __LINE__, __func__); + return -ENXIO; + } + + if (le16_to_cpu(dev_pg0.flags) & + MPI3_DEVICE0_FLAGS_CONTROLLER_DEV_HANDLE) + *sas_address = mrioc->sas_hba.sas_address; + else if (dev_pg0.device_form == MPI3_DEVICE_DEVFORM_SAS_SATA) { + sasinf = &dev_pg0.device_specific.sas_sata_format; + *sas_address = le64_to_cpu(sasinf->sas_address); + } else { + ioc_err(mrioc, "%s: device_form(%d) is not SAS_SATA\n", + __func__, dev_pg0.device_form); + return -ENXIO; + } + return 0; +} + +/** + * __mpi3mr_get_tgtdev_by_addr - target device search + * @mrioc: Adapter instance reference + * @sas_address: SAS address of the device + * @hba_port: HBA port entry + * + * This searches for target device from sas address and hba port + * pointer then return mpi3mr_tgt_dev object. + * + * Return: Valid tget_dev or NULL + */ +static struct mpi3mr_tgt_dev *__mpi3mr_get_tgtdev_by_addr(struct mpi3mr_ioc *mrioc, + u64 sas_address, struct mpi3mr_hba_port *hba_port) +{ + struct mpi3mr_tgt_dev *tgtdev; + + assert_spin_locked(&mrioc->tgtdev_lock); + + list_for_each_entry(tgtdev, &mrioc->tgtdev_list, list) + if ((tgtdev->dev_type == MPI3_DEVICE_DEVFORM_SAS_SATA) && + (tgtdev->dev_spec.sas_sata_inf.sas_address == sas_address) + && (tgtdev->dev_spec.sas_sata_inf.hba_port == hba_port)) + goto found_device; + return NULL; +found_device: + mpi3mr_tgtdev_get(tgtdev); + return tgtdev; +} + +/** + * mpi3mr_get_tgtdev_by_addr - target device search + * @mrioc: Adapter instance reference + * @sas_address: SAS address of the device + * @hba_port: HBA port entry + * + * This searches for target device from sas address and hba port + * pointer then return mpi3mr_tgt_dev object. + * + * Context: This function will acquire tgtdev_lock and will + * release before returning the mpi3mr_tgt_dev object. + * + * Return: Valid tget_dev or NULL + */ +static struct mpi3mr_tgt_dev *mpi3mr_get_tgtdev_by_addr(struct mpi3mr_ioc *mrioc, + u64 sas_address, struct mpi3mr_hba_port *hba_port) +{ + struct mpi3mr_tgt_dev *tgtdev = NULL; + unsigned long flags; + + if (!hba_port) + goto out; + + spin_lock_irqsave(&mrioc->tgtdev_lock, flags); + tgtdev = __mpi3mr_get_tgtdev_by_addr(mrioc, sas_address, hba_port); + spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags); + +out: + return tgtdev; +} + +/** + * mpi3mr_remove_device_by_sas_address - remove the device + * @mrioc: Adapter instance reference + * @sas_address: SAS address of the device + * @hba_port: HBA port entry + * + * This searches for target device using sas address and hba + * port pointer then removes it from the OS. + * + * Return: None + */ +static void mpi3mr_remove_device_by_sas_address(struct mpi3mr_ioc *mrioc, + u64 sas_address, struct mpi3mr_hba_port *hba_port) +{ + struct mpi3mr_tgt_dev *tgtdev = NULL; + unsigned long flags; + u8 was_on_tgtdev_list = 0; + + if (!hba_port) + return; + + spin_lock_irqsave(&mrioc->tgtdev_lock, flags); + tgtdev = __mpi3mr_get_tgtdev_by_addr(mrioc, + sas_address, hba_port); + if (tgtdev) { + if (!list_empty(&tgtdev->list)) { + list_del_init(&tgtdev->list); + was_on_tgtdev_list = 1; + mpi3mr_tgtdev_put(tgtdev); + } + } + spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags); + if (was_on_tgtdev_list) { + if (tgtdev->host_exposed) + mpi3mr_remove_tgtdev_from_host(mrioc, tgtdev); + mpi3mr_tgtdev_put(tgtdev); + } +} + +/** + * __mpi3mr_get_tgtdev_by_addr_and_rphy - target device search + * @mrioc: Adapter instance reference + * @sas_address: SAS address of the device + * @rphy: SAS transport layer rphy object + * + * This searches for target device from sas address and rphy + * pointer then return mpi3mr_tgt_dev object. + * + * Return: Valid tget_dev or NULL + */ +struct mpi3mr_tgt_dev *__mpi3mr_get_tgtdev_by_addr_and_rphy( + struct mpi3mr_ioc *mrioc, u64 sas_address, struct sas_rphy *rphy) +{ + struct mpi3mr_tgt_dev *tgtdev; + + assert_spin_locked(&mrioc->tgtdev_lock); + + list_for_each_entry(tgtdev, &mrioc->tgtdev_list, list) + if ((tgtdev->dev_type == MPI3_DEVICE_DEVFORM_SAS_SATA) && + (tgtdev->dev_spec.sas_sata_inf.sas_address == sas_address) + && (tgtdev->dev_spec.sas_sata_inf.rphy == rphy)) + goto found_device; + return NULL; +found_device: + mpi3mr_tgtdev_get(tgtdev); + return tgtdev; +} + +/** + * mpi3mr_expander_find_by_sas_address - sas expander search + * @mrioc: Adapter instance reference + * @sas_address: SAS address of expander + * @hba_port: HBA port entry + * + * Return: A valid SAS expander node or NULL. + * + */ +static struct mpi3mr_sas_node *mpi3mr_expander_find_by_sas_address( + struct mpi3mr_ioc *mrioc, u64 sas_address, + struct mpi3mr_hba_port *hba_port) +{ + struct mpi3mr_sas_node *sas_expander, *r = NULL; + + if (!hba_port) + goto out; + + list_for_each_entry(sas_expander, &mrioc->sas_expander_list, list) { + if ((sas_expander->sas_address != sas_address) || + (sas_expander->hba_port != hba_port)) + continue; + r = sas_expander; + goto out; + } +out: + return r; +} + +/** + * __mpi3mr_sas_node_find_by_sas_address - sas node search + * @mrioc: Adapter instance reference + * @sas_address: SAS address of expander or sas host + * @hba_port: HBA port entry + * Context: Caller should acquire mrioc->sas_node_lock. + * + * If the SAS address indicates the device is direct attached to + * the controller (controller's SAS address) then the SAS node + * associated with the controller is returned back else the SAS + * address and hba port are used to identify the exact expander + * and the associated sas_node object is returned. If there is + * no match NULL is returned. + * + * Return: A valid SAS node or NULL. + * + */ +static struct mpi3mr_sas_node *__mpi3mr_sas_node_find_by_sas_address( + struct mpi3mr_ioc *mrioc, u64 sas_address, + struct mpi3mr_hba_port *hba_port) +{ + + if (mrioc->sas_hba.sas_address == sas_address) + return &mrioc->sas_hba; + return mpi3mr_expander_find_by_sas_address(mrioc, sas_address, + hba_port); +} + +/** + * mpi3mr_parent_present - Is parent present for a phy + * @mrioc: Adapter instance reference + * @phy: SAS transport layer phy object + * + * Return: 0 if parent is present else non-zero + */ +static int mpi3mr_parent_present(struct mpi3mr_ioc *mrioc, struct sas_phy *phy) +{ + unsigned long flags; + struct mpi3mr_hba_port *hba_port = phy->hostdata; + + spin_lock_irqsave(&mrioc->sas_node_lock, flags); + if (__mpi3mr_sas_node_find_by_sas_address(mrioc, + phy->identify.sas_address, + hba_port) == NULL) { + spin_unlock_irqrestore(&mrioc->sas_node_lock, flags); + return -1; + } + spin_unlock_irqrestore(&mrioc->sas_node_lock, flags); + return 0; +} + +/** + * mpi3mr_convert_phy_link_rate - + * @link_rate: link rate as defined in the MPI header + * + * Convert link_rate from mpi format into sas_transport layer + * form. + * + * Return: A valid SAS transport layer defined link rate + */ +static enum sas_linkrate mpi3mr_convert_phy_link_rate(u8 link_rate) +{ + enum sas_linkrate rc; + + switch (link_rate) { + case MPI3_SAS_NEG_LINK_RATE_1_5: + rc = SAS_LINK_RATE_1_5_GBPS; + break; + case MPI3_SAS_NEG_LINK_RATE_3_0: + rc = SAS_LINK_RATE_3_0_GBPS; + break; + case MPI3_SAS_NEG_LINK_RATE_6_0: + rc = SAS_LINK_RATE_6_0_GBPS; + break; + case MPI3_SAS_NEG_LINK_RATE_12_0: + rc = SAS_LINK_RATE_12_0_GBPS; + break; + case MPI3_SAS_NEG_LINK_RATE_22_5: + rc = SAS_LINK_RATE_22_5_GBPS; + break; + case MPI3_SAS_NEG_LINK_RATE_PHY_DISABLED: + rc = SAS_PHY_DISABLED; + break; + case MPI3_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED: + rc = SAS_LINK_RATE_FAILED; + break; + case MPI3_SAS_NEG_LINK_RATE_PORT_SELECTOR: + rc = SAS_SATA_PORT_SELECTOR; + break; + case MPI3_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS: + rc = SAS_PHY_RESET_IN_PROGRESS; + break; + case MPI3_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE: + case MPI3_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE: + default: + rc = SAS_LINK_RATE_UNKNOWN; + break; + } + return rc; +} + +/** + * mpi3mr_delete_sas_phy - Remove a single phy from port + * @mrioc: Adapter instance reference + * @mr_sas_port: Internal Port object + * @mr_sas_phy: Internal Phy object + * + * Return: None. + */ +static void mpi3mr_delete_sas_phy(struct mpi3mr_ioc *mrioc, + struct mpi3mr_sas_port *mr_sas_port, + struct mpi3mr_sas_phy *mr_sas_phy) +{ + u64 sas_address = mr_sas_port->remote_identify.sas_address; + + dev_info(&mr_sas_phy->phy->dev, + "remove: sas_address(0x%016llx), phy(%d)\n", + (unsigned long long) sas_address, mr_sas_phy->phy_id); + + list_del(&mr_sas_phy->port_siblings); + mr_sas_port->num_phys--; + mr_sas_port->phy_mask &= ~(1 << mr_sas_phy->phy_id); + if (mr_sas_port->lowest_phy == mr_sas_phy->phy_id) + mr_sas_port->lowest_phy = ffs(mr_sas_port->phy_mask) - 1; + sas_port_delete_phy(mr_sas_port->port, mr_sas_phy->phy); + mr_sas_phy->phy_belongs_to_port = 0; +} + +/** + * mpi3mr_add_sas_phy - Adding a single phy to a port + * @mrioc: Adapter instance reference + * @mr_sas_port: Internal Port object + * @mr_sas_phy: Internal Phy object + * + * Return: None. + */ +static void mpi3mr_add_sas_phy(struct mpi3mr_ioc *mrioc, + struct mpi3mr_sas_port *mr_sas_port, + struct mpi3mr_sas_phy *mr_sas_phy) +{ + u64 sas_address = mr_sas_port->remote_identify.sas_address; + + dev_info(&mr_sas_phy->phy->dev, + "add: sas_address(0x%016llx), phy(%d)\n", (unsigned long long) + sas_address, mr_sas_phy->phy_id); + + list_add_tail(&mr_sas_phy->port_siblings, &mr_sas_port->phy_list); + mr_sas_port->num_phys++; + mr_sas_port->phy_mask |= (1 << mr_sas_phy->phy_id); + if (mr_sas_phy->phy_id < mr_sas_port->lowest_phy) + mr_sas_port->lowest_phy = ffs(mr_sas_port->phy_mask) - 1; + sas_port_add_phy(mr_sas_port->port, mr_sas_phy->phy); + mr_sas_phy->phy_belongs_to_port = 1; +} + +/** + * mpi3mr_add_phy_to_an_existing_port - add phy to existing port + * @mrioc: Adapter instance reference + * @mr_sas_node: Internal sas node object (expander or host) + * @mr_sas_phy: Internal Phy object * + * @sas_address: SAS address of device/expander were phy needs + * to be added to + * @hba_port: HBA port entry + * + * Return: None. + */ +static void mpi3mr_add_phy_to_an_existing_port(struct mpi3mr_ioc *mrioc, + struct mpi3mr_sas_node *mr_sas_node, struct mpi3mr_sas_phy *mr_sas_phy, + u64 sas_address, struct mpi3mr_hba_port *hba_port) +{ + struct mpi3mr_sas_port *mr_sas_port; + struct mpi3mr_sas_phy *srch_phy; + + if (mr_sas_phy->phy_belongs_to_port == 1) + return; + + if (!hba_port) + return; + + list_for_each_entry(mr_sas_port, &mr_sas_node->sas_port_list, + port_list) { + if (mr_sas_port->remote_identify.sas_address != + sas_address) + continue; + if (mr_sas_port->hba_port != hba_port) + continue; + list_for_each_entry(srch_phy, &mr_sas_port->phy_list, + port_siblings) { + if (srch_phy == mr_sas_phy) + return; + } + mpi3mr_add_sas_phy(mrioc, mr_sas_port, mr_sas_phy); + return; + } +} + +/** + * mpi3mr_delete_sas_port - helper function to removing a port + * @mrioc: Adapter instance reference + * @mr_sas_port: Internal Port object + * + * Return: None. + */ +static void mpi3mr_delete_sas_port(struct mpi3mr_ioc *mrioc, + struct mpi3mr_sas_port *mr_sas_port) +{ + u64 sas_address = mr_sas_port->remote_identify.sas_address; + struct mpi3mr_hba_port *hba_port = mr_sas_port->hba_port; + enum sas_device_type device_type = + mr_sas_port->remote_identify.device_type; + + dev_info(&mr_sas_port->port->dev, + "remove: sas_address(0x%016llx)\n", + (unsigned long long) sas_address); + + if (device_type == SAS_END_DEVICE) + mpi3mr_remove_device_by_sas_address(mrioc, sas_address, + hba_port); + + else if (device_type == SAS_EDGE_EXPANDER_DEVICE || + device_type == SAS_FANOUT_EXPANDER_DEVICE) + mpi3mr_expander_remove(mrioc, sas_address, hba_port); +} + +/** + * mpi3mr_del_phy_from_an_existing_port - del phy from a port + * @mrioc: Adapter instance reference + * @mr_sas_node: Internal sas node object (expander or host) + * @mr_sas_phy: Internal Phy object + * + * Return: None. + */ +static void mpi3mr_del_phy_from_an_existing_port(struct mpi3mr_ioc *mrioc, + struct mpi3mr_sas_node *mr_sas_node, struct mpi3mr_sas_phy *mr_sas_phy) +{ + struct mpi3mr_sas_port *mr_sas_port, *next; + struct mpi3mr_sas_phy *srch_phy; + + if (mr_sas_phy->phy_belongs_to_port == 0) + return; + + list_for_each_entry_safe(mr_sas_port, next, &mr_sas_node->sas_port_list, + port_list) { + list_for_each_entry(srch_phy, &mr_sas_port->phy_list, + port_siblings) { + if (srch_phy != mr_sas_phy) + continue; + if ((mr_sas_port->num_phys == 1) && + !mrioc->reset_in_progress) + mpi3mr_delete_sas_port(mrioc, mr_sas_port); + else + mpi3mr_delete_sas_phy(mrioc, mr_sas_port, + mr_sas_phy); + return; + } + } +} + +/** + * mpi3mr_sas_port_sanity_check - sanity check while adding port + * @mrioc: Adapter instance reference + * @mr_sas_node: Internal sas node object (expander or host) + * @sas_address: SAS address of device/expander + * @hba_port: HBA port entry + * + * Verifies whether the Phys attached to a device with the given + * SAS address already belongs to an existing sas port if so + * will remove those phys from the sas port + * + * Return: None. + */ +static void mpi3mr_sas_port_sanity_check(struct mpi3mr_ioc *mrioc, + struct mpi3mr_sas_node *mr_sas_node, u64 sas_address, + struct mpi3mr_hba_port *hba_port) +{ + int i; + + for (i = 0; i < mr_sas_node->num_phys; i++) { + if ((mr_sas_node->phy[i].remote_identify.sas_address != + sas_address) || (mr_sas_node->phy[i].hba_port != hba_port)) + continue; + if (mr_sas_node->phy[i].phy_belongs_to_port == 1) + mpi3mr_del_phy_from_an_existing_port(mrioc, + mr_sas_node, &mr_sas_node->phy[i]); + } +} + +/** + * mpi3mr_set_identify - set identify for phys and end devices + * @mrioc: Adapter instance reference + * @handle: Firmware device handle + * @identify: SAS transport layer's identify info + * + * Populates sas identify info for a specific device. + * + * Return: 0 for success, non-zero for failure. + */ +static int mpi3mr_set_identify(struct mpi3mr_ioc *mrioc, u16 handle, + struct sas_identify *identify) +{ + + struct mpi3_device_page0 device_pg0; + struct mpi3_device0_sas_sata_format *sasinf; + u16 device_info; + u16 ioc_status; + + if (mrioc->reset_in_progress) { + ioc_err(mrioc, "%s: host reset in progress!\n", __func__); + return -EFAULT; + } + + if ((mpi3mr_cfg_get_dev_pg0(mrioc, &ioc_status, &device_pg0, + sizeof(device_pg0), MPI3_DEVICE_PGAD_FORM_HANDLE, handle))) { + ioc_err(mrioc, "%s: device page0 read failed\n", __func__); + return -ENXIO; + } + + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, "device page read failed for handle(0x%04x), with ioc_status(0x%04x) failure at %s:%d/%s()!\n", + handle, ioc_status, __FILE__, __LINE__, __func__); + return -EIO; + } + + memset(identify, 0, sizeof(struct sas_identify)); + sasinf = &device_pg0.device_specific.sas_sata_format; + device_info = le16_to_cpu(sasinf->device_info); + + /* sas_address */ + identify->sas_address = le64_to_cpu(sasinf->sas_address); + + /* phy number of the parent device this device is linked to */ + identify->phy_identifier = sasinf->phy_num; + + /* device_type */ + switch (device_info & MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_MASK) { + case MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_NO_DEVICE: + identify->device_type = SAS_PHY_UNUSED; + break; + case MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_END_DEVICE: + identify->device_type = SAS_END_DEVICE; + break; + case MPI3_SAS_DEVICE_INFO_DEVICE_TYPE_EXPANDER: + identify->device_type = SAS_EDGE_EXPANDER_DEVICE; + break; + } + + /* initiator_port_protocols */ + if (device_info & MPI3_SAS_DEVICE_INFO_SSP_INITIATOR) + identify->initiator_port_protocols |= SAS_PROTOCOL_SSP; + /* MPI3.0 doesn't have define for SATA INIT so setting both here*/ + if (device_info & MPI3_SAS_DEVICE_INFO_STP_INITIATOR) + identify->initiator_port_protocols |= (SAS_PROTOCOL_STP | + SAS_PROTOCOL_SATA); + if (device_info & MPI3_SAS_DEVICE_INFO_SMP_INITIATOR) + identify->initiator_port_protocols |= SAS_PROTOCOL_SMP; + + /* target_port_protocols */ + if (device_info & MPI3_SAS_DEVICE_INFO_SSP_TARGET) + identify->target_port_protocols |= SAS_PROTOCOL_SSP; + /* MPI3.0 doesn't have define for STP Target so setting both here*/ + if (device_info & MPI3_SAS_DEVICE_INFO_STP_SATA_TARGET) + identify->target_port_protocols |= (SAS_PROTOCOL_STP | + SAS_PROTOCOL_SATA); + if (device_info & MPI3_SAS_DEVICE_INFO_SMP_TARGET) + identify->target_port_protocols |= SAS_PROTOCOL_SMP; + return 0; +} + +/** + * mpi3mr_add_host_phy - report sas_host phy to SAS transport + * @mrioc: Adapter instance reference + * @mr_sas_phy: Internal Phy object + * @phy_pg0: SAS phy page 0 + * @parent_dev: Prent device class object + * + * Return: 0 for success, non-zero for failure. + */ +static int mpi3mr_add_host_phy(struct mpi3mr_ioc *mrioc, + struct mpi3mr_sas_phy *mr_sas_phy, struct mpi3_sas_phy_page0 phy_pg0, + struct device *parent_dev) +{ + struct sas_phy *phy; + int phy_index = mr_sas_phy->phy_id; + + + INIT_LIST_HEAD(&mr_sas_phy->port_siblings); + phy = sas_phy_alloc(parent_dev, phy_index); + if (!phy) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -1; + } + if ((mpi3mr_set_identify(mrioc, mr_sas_phy->handle, + &mr_sas_phy->identify))) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + sas_phy_free(phy); + return -1; + } + phy->identify = mr_sas_phy->identify; + mr_sas_phy->attached_handle = le16_to_cpu(phy_pg0.attached_dev_handle); + if (mr_sas_phy->attached_handle) + mpi3mr_set_identify(mrioc, mr_sas_phy->attached_handle, + &mr_sas_phy->remote_identify); + phy->identify.phy_identifier = mr_sas_phy->phy_id; + phy->negotiated_linkrate = mpi3mr_convert_phy_link_rate( + (phy_pg0.negotiated_link_rate & + MPI3_SAS_NEG_LINK_RATE_LOGICAL_MASK) >> + MPI3_SAS_NEG_LINK_RATE_LOGICAL_SHIFT); + phy->minimum_linkrate_hw = mpi3mr_convert_phy_link_rate( + phy_pg0.hw_link_rate & MPI3_SAS_HWRATE_MIN_RATE_MASK); + phy->maximum_linkrate_hw = mpi3mr_convert_phy_link_rate( + phy_pg0.hw_link_rate >> 4); + phy->minimum_linkrate = mpi3mr_convert_phy_link_rate( + phy_pg0.programmed_link_rate & MPI3_SAS_PRATE_MIN_RATE_MASK); + phy->maximum_linkrate = mpi3mr_convert_phy_link_rate( + phy_pg0.programmed_link_rate >> 4); + phy->hostdata = mr_sas_phy->hba_port; + + if ((sas_phy_add(phy))) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + sas_phy_free(phy); + return -1; + } + if ((mrioc->logging_level & MPI3_DEBUG_TRANSPORT_INFO)) + dev_info(&phy->dev, + "add: handle(0x%04x), sas_address(0x%016llx)\n" + "\tattached_handle(0x%04x), sas_address(0x%016llx)\n", + mr_sas_phy->handle, (unsigned long long) + mr_sas_phy->identify.sas_address, + mr_sas_phy->attached_handle, + (unsigned long long) + mr_sas_phy->remote_identify.sas_address); + mr_sas_phy->phy = phy; + return 0; +} + +/** + * mpi3mr_add_expander_phy - report expander phy to transport + * @mrioc: Adapter instance reference + * @mr_sas_phy: Internal Phy object + * @expander_pg1: SAS Expander page 1 + * @parent_dev: Parent device class object + * + * Return: 0 for success, non-zero for failure. + */ +static int mpi3mr_add_expander_phy(struct mpi3mr_ioc *mrioc, + struct mpi3mr_sas_phy *mr_sas_phy, + struct mpi3_sas_expander_page1 expander_pg1, + struct device *parent_dev) +{ + struct sas_phy *phy; + int phy_index = mr_sas_phy->phy_id; + + INIT_LIST_HEAD(&mr_sas_phy->port_siblings); + phy = sas_phy_alloc(parent_dev, phy_index); + if (!phy) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -1; + } + if ((mpi3mr_set_identify(mrioc, mr_sas_phy->handle, + &mr_sas_phy->identify))) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + sas_phy_free(phy); + return -1; + } + phy->identify = mr_sas_phy->identify; + mr_sas_phy->attached_handle = + le16_to_cpu(expander_pg1.attached_dev_handle); + if (mr_sas_phy->attached_handle) + mpi3mr_set_identify(mrioc, mr_sas_phy->attached_handle, + &mr_sas_phy->remote_identify); + phy->identify.phy_identifier = mr_sas_phy->phy_id; + phy->negotiated_linkrate = mpi3mr_convert_phy_link_rate( + (expander_pg1.negotiated_link_rate & + MPI3_SAS_NEG_LINK_RATE_LOGICAL_MASK) >> + MPI3_SAS_NEG_LINK_RATE_LOGICAL_SHIFT); + phy->minimum_linkrate_hw = mpi3mr_convert_phy_link_rate( + expander_pg1.hw_link_rate & MPI3_SAS_HWRATE_MIN_RATE_MASK); + phy->maximum_linkrate_hw = mpi3mr_convert_phy_link_rate( + expander_pg1.hw_link_rate >> 4); + phy->minimum_linkrate = mpi3mr_convert_phy_link_rate( + expander_pg1.programmed_link_rate & MPI3_SAS_PRATE_MIN_RATE_MASK); + phy->maximum_linkrate = mpi3mr_convert_phy_link_rate( + expander_pg1.programmed_link_rate >> 4); + phy->hostdata = mr_sas_phy->hba_port; + + if ((sas_phy_add(phy))) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + sas_phy_free(phy); + return -1; + } + if ((mrioc->logging_level & MPI3_DEBUG_TRANSPORT_INFO)) + dev_info(&phy->dev, + "add: handle(0x%04x), sas_address(0x%016llx)\n" + "\tattached_handle(0x%04x), sas_address(0x%016llx)\n", + mr_sas_phy->handle, (unsigned long long) + mr_sas_phy->identify.sas_address, + mr_sas_phy->attached_handle, + (unsigned long long) + mr_sas_phy->remote_identify.sas_address); + mr_sas_phy->phy = phy; + return 0; +} + +/** + * mpi3mr_alloc_hba_port - alloc hba port object + * @mrioc: Adapter instance reference + * @port_id: Port number + * + * Alloc memory for hba port object. + */ +static struct mpi3mr_hba_port * +mpi3mr_alloc_hba_port(struct mpi3mr_ioc *mrioc, u16 port_id) +{ + struct mpi3mr_hba_port *hba_port; + + hba_port = kzalloc(sizeof(struct mpi3mr_hba_port), + GFP_KERNEL); + if (!hba_port) + return NULL; + hba_port->port_id = port_id; + ioc_info(mrioc, "hba_port entry: %p, port: %d is added to hba_port list\n", + hba_port, hba_port->port_id); + list_add_tail(&hba_port->list, &mrioc->hba_port_table_list); + return hba_port; +} + +/** + * mpi3mr_get_hba_port_by_id - find hba port by id + * @mrioc: Adapter instance reference + * @port_id - Port ID to search + * + * Return: mpi3mr_hba_port reference for the matched port + */ + +struct mpi3mr_hba_port *mpi3mr_get_hba_port_by_id(struct mpi3mr_ioc *mrioc, + u8 port_id) +{ + struct mpi3mr_hba_port *port, *port_next; + + list_for_each_entry_safe(port, port_next, + &mrioc->hba_port_table_list, list) { + if (port->port_id != port_id) + continue; + if (port->flags & MPI3MR_HBA_PORT_FLAG_DIRTY) + continue; + return port; + } + + return NULL; +} + +/** + * mpi3mr_update_links - refreshing SAS phy link changes + * @mrioc: Adapter instance reference + * @sas_address_parent: SAS address of parent expander or host + * @handle: Firmware device handle of attached device + * @phy_number: Phy number + * @link_rate: New link rate + * @hba_port: HBA port entry + * + * Return: None. + */ +void mpi3mr_update_links(struct mpi3mr_ioc *mrioc, + u64 sas_address_parent, u16 handle, u8 phy_number, u8 link_rate, + struct mpi3mr_hba_port *hba_port) +{ + unsigned long flags; + struct mpi3mr_sas_node *mr_sas_node; + struct mpi3mr_sas_phy *mr_sas_phy; + + if (mrioc->reset_in_progress) + return; + + spin_lock_irqsave(&mrioc->sas_node_lock, flags); + mr_sas_node = __mpi3mr_sas_node_find_by_sas_address(mrioc, + sas_address_parent, hba_port); + if (!mr_sas_node) { + spin_unlock_irqrestore(&mrioc->sas_node_lock, flags); + return; + } + + mr_sas_phy = &mr_sas_node->phy[phy_number]; + mr_sas_phy->attached_handle = handle; + spin_unlock_irqrestore(&mrioc->sas_node_lock, flags); + if (handle && (link_rate >= MPI3_SAS_NEG_LINK_RATE_1_5)) { + mpi3mr_set_identify(mrioc, handle, + &mr_sas_phy->remote_identify); + mpi3mr_add_phy_to_an_existing_port(mrioc, mr_sas_node, + mr_sas_phy, mr_sas_phy->remote_identify.sas_address, + hba_port); + } else + memset(&mr_sas_phy->remote_identify, 0, sizeof(struct + sas_identify)); + + if (mr_sas_phy->phy) + mr_sas_phy->phy->negotiated_linkrate = + mpi3mr_convert_phy_link_rate(link_rate); + + if ((mrioc->logging_level & MPI3_DEBUG_TRANSPORT_INFO)) + dev_info(&mr_sas_phy->phy->dev, + "refresh: parent sas_address(0x%016llx),\n" + "\tlink_rate(0x%02x), phy(%d)\n" + "\tattached_handle(0x%04x), sas_address(0x%016llx)\n", + (unsigned long long)sas_address_parent, + link_rate, phy_number, handle, (unsigned long long) + mr_sas_phy->remote_identify.sas_address); +} + +/** + * mpi3mr_sas_host_refresh - refreshing sas host object contents + * @mrioc: Adapter instance reference + * + * This function refreshes the controllers phy information and + * updates the SAS transport layer with updated information, + * this is executed for each device addition or device info + * change events + * + * Return: None. + */ +void mpi3mr_sas_host_refresh(struct mpi3mr_ioc *mrioc) +{ + int i; + u8 link_rate; + u16 sz, port_id, attached_handle; + struct mpi3_sas_io_unit_page0 *sas_io_unit_pg0 = NULL; + + dprint_transport_info(mrioc, + "updating handles for sas_host(0x%016llx)\n", + (unsigned long long)mrioc->sas_hba.sas_address); + + sz = offsetof(struct mpi3_sas_io_unit_page0, phy_data) + + (mrioc->sas_hba.num_phys * + sizeof(struct mpi3_sas_io_unit0_phy_data)); + sas_io_unit_pg0 = kzalloc(sz, GFP_KERNEL); + if (!sas_io_unit_pg0) + return; + if (mpi3mr_cfg_get_sas_io_unit_pg0(mrioc, sas_io_unit_pg0, sz)) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + goto out; + } + + mrioc->sas_hba.handle = 0; + for (i = 0; i < mrioc->sas_hba.num_phys; i++) { + if (sas_io_unit_pg0->phy_data[i].phy_flags & + (MPI3_SASIOUNIT0_PHYFLAGS_HOST_PHY | + MPI3_SASIOUNIT0_PHYFLAGS_VIRTUAL_PHY)) + continue; + link_rate = + sas_io_unit_pg0->phy_data[i].negotiated_link_rate >> 4; + if (!mrioc->sas_hba.handle) + mrioc->sas_hba.handle = le16_to_cpu( + sas_io_unit_pg0->phy_data[i].controller_dev_handle); + port_id = sas_io_unit_pg0->phy_data[i].io_unit_port; + if (!(mpi3mr_get_hba_port_by_id(mrioc, port_id))) + if (!mpi3mr_alloc_hba_port(mrioc, port_id)) + goto out; + + mrioc->sas_hba.phy[i].handle = mrioc->sas_hba.handle; + attached_handle = le16_to_cpu( + sas_io_unit_pg0->phy_data[i].attached_dev_handle); + if (attached_handle && link_rate < MPI3_SAS_NEG_LINK_RATE_1_5) + link_rate = MPI3_SAS_NEG_LINK_RATE_1_5; + mrioc->sas_hba.phy[i].hba_port = + mpi3mr_get_hba_port_by_id(mrioc, port_id); + mpi3mr_update_links(mrioc, mrioc->sas_hba.sas_address, + attached_handle, i, link_rate, + mrioc->sas_hba.phy[i].hba_port); + } + out: + kfree(sas_io_unit_pg0); +} + +/** + * mpi3mr_sas_host_add - create sas host object + * @mrioc: Adapter instance reference + * + * This function creates the controllers phy information and + * updates the SAS transport layer with updated information, + * this is executed for first device addition or device info + * change event. + * + * Return: None. + */ +void mpi3mr_sas_host_add(struct mpi3mr_ioc *mrioc) +{ + int i; + u16 sz, num_phys = 1, port_id, ioc_status; + struct mpi3_sas_io_unit_page0 *sas_io_unit_pg0 = NULL; + struct mpi3_sas_phy_page0 phy_pg0; + struct mpi3_device_page0 dev_pg0; + struct mpi3_enclosure_page0 encl_pg0; + struct mpi3_device0_sas_sata_format *sasinf; + + sz = offsetof(struct mpi3_sas_io_unit_page0, phy_data) + + (num_phys * sizeof(struct mpi3_sas_io_unit0_phy_data)); + sas_io_unit_pg0 = kzalloc(sz, GFP_KERNEL); + if (!sas_io_unit_pg0) + return; + + if (mpi3mr_cfg_get_sas_io_unit_pg0(mrioc, sas_io_unit_pg0, sz)) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + goto out; + } + num_phys = sas_io_unit_pg0->num_phys; + kfree(sas_io_unit_pg0); + + mrioc->sas_hba.host_node = 1; + INIT_LIST_HEAD(&mrioc->sas_hba.sas_port_list); + mrioc->sas_hba.parent_dev = &mrioc->shost->shost_gendev; + mrioc->sas_hba.phy = kcalloc(num_phys, + sizeof(struct mpi3mr_sas_phy), GFP_KERNEL); + if (!mrioc->sas_hba.phy) + return; + + mrioc->sas_hba.num_phys = num_phys; + + sz = offsetof(struct mpi3_sas_io_unit_page0, phy_data) + + (num_phys * sizeof(struct mpi3_sas_io_unit0_phy_data)); + sas_io_unit_pg0 = kzalloc(sz, GFP_KERNEL); + if (!sas_io_unit_pg0) + return; + + if (mpi3mr_cfg_get_sas_io_unit_pg0(mrioc, sas_io_unit_pg0, sz)) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + goto out; + } + + mrioc->sas_hba.handle = 0; + for (i = 0; i < mrioc->sas_hba.num_phys; i++) { + if (sas_io_unit_pg0->phy_data[i].phy_flags & + (MPI3_SASIOUNIT0_PHYFLAGS_HOST_PHY | + MPI3_SASIOUNIT0_PHYFLAGS_VIRTUAL_PHY)) + continue; + if (mpi3mr_cfg_get_sas_phy_pg0(mrioc, &ioc_status, &phy_pg0, + sizeof(struct mpi3_sas_phy_page0), + MPI3_SAS_PHY_PGAD_FORM_PHY_NUMBER, i)) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + goto out; + } + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + goto out; + } + + if (!mrioc->sas_hba.handle) + mrioc->sas_hba.handle = le16_to_cpu( + sas_io_unit_pg0->phy_data[i].controller_dev_handle); + port_id = sas_io_unit_pg0->phy_data[i].io_unit_port; + + if (!(mpi3mr_get_hba_port_by_id(mrioc, port_id))) + if (!mpi3mr_alloc_hba_port(mrioc, port_id)) + goto out; + + mrioc->sas_hba.phy[i].handle = mrioc->sas_hba.handle; + mrioc->sas_hba.phy[i].phy_id = i; + mrioc->sas_hba.phy[i].hba_port = + mpi3mr_get_hba_port_by_id(mrioc, port_id); + mpi3mr_add_host_phy(mrioc, &mrioc->sas_hba.phy[i], + phy_pg0, mrioc->sas_hba.parent_dev); + } + if ((mpi3mr_cfg_get_dev_pg0(mrioc, &ioc_status, &dev_pg0, + sizeof(dev_pg0), MPI3_DEVICE_PGAD_FORM_HANDLE, + mrioc->sas_hba.handle))) { + ioc_err(mrioc, "%s: device page0 read failed\n", __func__); + goto out; + } + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, "device page read failed for handle(0x%04x), with ioc_status(0x%04x) failure at %s:%d/%s()!\n", + mrioc->sas_hba.handle, ioc_status, __FILE__, __LINE__, + __func__); + goto out; + } + mrioc->sas_hba.enclosure_handle = + le16_to_cpu(dev_pg0.enclosure_handle); + sasinf = &dev_pg0.device_specific.sas_sata_format; + mrioc->sas_hba.sas_address = + le64_to_cpu(sasinf->sas_address); + ioc_info(mrioc, + "host_add: handle(0x%04x), sas_addr(0x%016llx), phys(%d)\n", + mrioc->sas_hba.handle, + (unsigned long long) mrioc->sas_hba.sas_address, + mrioc->sas_hba.num_phys); + + if (mrioc->sas_hba.enclosure_handle) { + if (!(mpi3mr_cfg_get_enclosure_pg0(mrioc, &ioc_status, + &encl_pg0, sizeof(encl_pg0), + MPI3_ENCLOS_PGAD_FORM_HANDLE, + mrioc->sas_hba.enclosure_handle)) && + (ioc_status == MPI3_IOCSTATUS_SUCCESS)) + mrioc->sas_hba.enclosure_logical_id = + le64_to_cpu(encl_pg0.enclosure_logical_id); + } + +out: + kfree(sas_io_unit_pg0); +} + +/** + * mpi3mr_sas_port_add - Expose the SAS device to the SAS TL + * @mrioc: Adapter instance reference + * @handle: Firmware device handle of the attached device + * @sas_address_parent: sas address of parent expander or host + * @hba_port: HBA port entry + * + * This function creates a new sas port object for the given end + * device matching sas address and hba_port and adds it to the + * sas_node's sas_port_list and expose the attached sas device + * to the SAS transport layer through sas_rphy_add. + * + * Returns a valid mpi3mr_sas_port reference or NULL. + */ +static struct mpi3mr_sas_port *mpi3mr_sas_port_add(struct mpi3mr_ioc *mrioc, + u16 handle, u64 sas_address_parent, struct mpi3mr_hba_port *hba_port) +{ + struct mpi3mr_sas_phy *mr_sas_phy, *next; + struct mpi3mr_sas_port *mr_sas_port; + unsigned long flags; + struct mpi3mr_sas_node *mr_sas_node; + struct sas_rphy *rphy; + struct mpi3mr_tgt_dev *tgtdev = NULL; + int i; + struct sas_port *port; + + if (!hba_port) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return NULL; + } + + mr_sas_port = kzalloc(sizeof(struct mpi3mr_sas_port), GFP_KERNEL); + if (!mr_sas_port) + return NULL; + + INIT_LIST_HEAD(&mr_sas_port->port_list); + INIT_LIST_HEAD(&mr_sas_port->phy_list); + spin_lock_irqsave(&mrioc->sas_node_lock, flags); + mr_sas_node = __mpi3mr_sas_node_find_by_sas_address(mrioc, + sas_address_parent, hba_port); + spin_unlock_irqrestore(&mrioc->sas_node_lock, flags); + + if (!mr_sas_node) { + ioc_err(mrioc, "%s:could not find parent sas_address(0x%016llx)!\n", + __func__, (unsigned long long)sas_address_parent); + goto out_fail; + } + + if ((mpi3mr_set_identify(mrioc, handle, + &mr_sas_port->remote_identify))) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + goto out_fail; + } + + if (mr_sas_port->remote_identify.device_type == SAS_PHY_UNUSED) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + goto out_fail; + } + + mr_sas_port->hba_port = hba_port; + mpi3mr_sas_port_sanity_check(mrioc, mr_sas_node, + mr_sas_port->remote_identify.sas_address, hba_port); + + for (i = 0; i < mr_sas_node->num_phys; i++) { + if ((mr_sas_node->phy[i].remote_identify.sas_address != + mr_sas_port->remote_identify.sas_address) || + (mr_sas_node->phy[i].hba_port != hba_port)) + continue; + list_add_tail(&mr_sas_node->phy[i].port_siblings, + &mr_sas_port->phy_list); + mr_sas_port->num_phys++; + mr_sas_port->phy_mask |= (1 << i); + } + + if (!mr_sas_port->num_phys) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + goto out_fail; + } + + mr_sas_port->lowest_phy = ffs(mr_sas_port->phy_mask) - 1; + + if (mr_sas_port->remote_identify.device_type == SAS_END_DEVICE) { + tgtdev = mpi3mr_get_tgtdev_by_addr(mrioc, + mr_sas_port->remote_identify.sas_address, + mr_sas_port->hba_port); + + if (!tgtdev) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + goto out_fail; + } + tgtdev->dev_spec.sas_sata_inf.pend_sas_rphy_add = 1; + } + + if (!mr_sas_node->parent_dev) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + goto out_fail; + } + + port = sas_port_alloc_num(mr_sas_node->parent_dev); + if ((sas_port_add(port))) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + goto out_fail; + } + + list_for_each_entry(mr_sas_phy, &mr_sas_port->phy_list, + port_siblings) { + if ((mrioc->logging_level & MPI3_DEBUG_TRANSPORT_INFO)) + dev_info(&port->dev, + "add: handle(0x%04x), sas_address(0x%016llx), phy(%d)\n", + handle, (unsigned long long) + mr_sas_port->remote_identify.sas_address, + mr_sas_phy->phy_id); + sas_port_add_phy(port, mr_sas_phy->phy); + mr_sas_phy->phy_belongs_to_port = 1; + mr_sas_phy->hba_port = hba_port; + } + + mr_sas_port->port = port; + if (mr_sas_port->remote_identify.device_type == SAS_END_DEVICE) { + rphy = sas_end_device_alloc(port); + tgtdev->dev_spec.sas_sata_inf.rphy = rphy; + } else { + rphy = sas_expander_alloc(port, + mr_sas_port->remote_identify.device_type); + } + rphy->identify = mr_sas_port->remote_identify; + + if (mrioc->current_event) + mrioc->current_event->pending_at_sml = 1; + + if ((sas_rphy_add(rphy))) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + } + if (mr_sas_port->remote_identify.device_type == SAS_END_DEVICE) { + tgtdev->dev_spec.sas_sata_inf.pend_sas_rphy_add = 0; + tgtdev->dev_spec.sas_sata_inf.sas_transport_attached = 1; + mpi3mr_tgtdev_put(tgtdev); + } + + dev_info(&rphy->dev, + "%s: added: handle(0x%04x), sas_address(0x%016llx)\n", + __func__, handle, (unsigned long long) + mr_sas_port->remote_identify.sas_address); + + mr_sas_port->rphy = rphy; + spin_lock_irqsave(&mrioc->sas_node_lock, flags); + list_add_tail(&mr_sas_port->port_list, &mr_sas_node->sas_port_list); + spin_unlock_irqrestore(&mrioc->sas_node_lock, flags); + + if (mrioc->current_event) { + mrioc->current_event->pending_at_sml = 0; + if (mrioc->current_event->discard) + mpi3mr_print_device_event_notice(mrioc, true); + } + + /* fill in report manufacture */ + if (mr_sas_port->remote_identify.device_type == + SAS_EDGE_EXPANDER_DEVICE || + mr_sas_port->remote_identify.device_type == + SAS_FANOUT_EXPANDER_DEVICE) + mpi3mr_report_manufacture(mrioc, + mr_sas_port->remote_identify.sas_address, + rphy_to_expander_device(rphy), hba_port->port_id); + + return mr_sas_port; + + out_fail: + list_for_each_entry_safe(mr_sas_phy, next, &mr_sas_port->phy_list, + port_siblings) + list_del(&mr_sas_phy->port_siblings); + kfree(mr_sas_port); + return NULL; +} + +/** + * mpi3mr_sas_port_remove - remove port from the list + * @mrioc: Adapter instance reference + * @sas_address: SAS address of attached device + * @sas_address_parent: SAS address of parent expander or host + * @hba_port: HBA port entry + * + * Removing object and freeing associated memory from the + * sas_port_list. + * + * Return: None + */ +static void mpi3mr_sas_port_remove(struct mpi3mr_ioc *mrioc, u64 sas_address, + u64 sas_address_parent, struct mpi3mr_hba_port *hba_port) +{ + int i; + unsigned long flags; + struct mpi3mr_sas_port *mr_sas_port, *next; + struct mpi3mr_sas_node *mr_sas_node; + u8 found = 0; + struct mpi3mr_sas_phy *mr_sas_phy, *next_phy; + struct mpi3mr_hba_port *srch_port, *hba_port_next = NULL; + + if (!hba_port) + return; + + spin_lock_irqsave(&mrioc->sas_node_lock, flags); + mr_sas_node = __mpi3mr_sas_node_find_by_sas_address(mrioc, + sas_address_parent, hba_port); + if (!mr_sas_node) { + spin_unlock_irqrestore(&mrioc->sas_node_lock, flags); + return; + } + list_for_each_entry_safe(mr_sas_port, next, &mr_sas_node->sas_port_list, + port_list) { + if (mr_sas_port->remote_identify.sas_address != sas_address) + continue; + if (mr_sas_port->hba_port != hba_port) + continue; + found = 1; + list_del(&mr_sas_port->port_list); + goto out; + } + + out: + if (!found) { + spin_unlock_irqrestore(&mrioc->sas_node_lock, flags); + return; + } + + if (mr_sas_node->host_node) { + list_for_each_entry_safe(srch_port, hba_port_next, + &mrioc->hba_port_table_list, list) { + if (srch_port != hba_port) + continue; + ioc_info(mrioc, + "removing hba_port entry: %p port: %d from hba_port list\n", + srch_port, srch_port->port_id); + list_del(&hba_port->list); + kfree(hba_port); + break; + } + } + + for (i = 0; i < mr_sas_node->num_phys; i++) { + if (mr_sas_node->phy[i].remote_identify.sas_address == + sas_address) + memset(&mr_sas_node->phy[i].remote_identify, 0, + sizeof(struct sas_identify)); + } + + spin_unlock_irqrestore(&mrioc->sas_node_lock, flags); + + if (mrioc->current_event) + mrioc->current_event->pending_at_sml = 1; + + list_for_each_entry_safe(mr_sas_phy, next_phy, + &mr_sas_port->phy_list, port_siblings) { + if ((!mrioc->stop_drv_processing) && + (mrioc->logging_level & MPI3_DEBUG_TRANSPORT_INFO)) + dev_info(&mr_sas_port->port->dev, + "remove: sas_address(0x%016llx), phy(%d)\n", + (unsigned long long) + mr_sas_port->remote_identify.sas_address, + mr_sas_phy->phy_id); + mr_sas_phy->phy_belongs_to_port = 0; + if (!mrioc->stop_drv_processing) + sas_port_delete_phy(mr_sas_port->port, + mr_sas_phy->phy); + list_del(&mr_sas_phy->port_siblings); + } + if (!mrioc->stop_drv_processing) + sas_port_delete(mr_sas_port->port); + ioc_info(mrioc, "%s: removed sas_address(0x%016llx)\n", + __func__, (unsigned long long)sas_address); + + if (mrioc->current_event) { + mrioc->current_event->pending_at_sml = 0; + if (mrioc->current_event->discard) + mpi3mr_print_device_event_notice(mrioc, false); + } + + kfree(mr_sas_port); +} + +/** + * struct host_port - host port details + * @sas_address: SAS Address of the attached device + * @phy_mask: phy mask of host port + * @handle: Device Handle of attached device + * @iounit_port_id: port ID + * @used: host port is already matched with sas port from sas_port_list + * @lowest_phy: lowest phy ID of host port + */ +struct host_port { + u64 sas_address; + u32 phy_mask; + u16 handle; + u8 iounit_port_id; + u8 used; + u8 lowest_phy; +}; + +/** + * mpi3mr_update_mr_sas_port - update sas port objects during reset + * @mrioc: Adapter instance reference + * @h_port: host_port object + * @mr_sas_port: sas_port objects which needs to be updated + * + * Update the port ID of sas port object. Also add the phys if new phys got + * added to current sas port and remove the phys if some phys are moved + * out of the current sas port. + * + * Return: Nothing. + */ +static void +mpi3mr_update_mr_sas_port(struct mpi3mr_ioc *mrioc, struct host_port *h_port, + struct mpi3mr_sas_port *mr_sas_port) +{ + struct mpi3mr_sas_phy *mr_sas_phy; + u32 phy_mask_xor; + u64 phys_to_be_added, phys_to_be_removed; + int i; + + h_port->used = 1; + mr_sas_port->marked_responding = 1; + + dev_info(&mr_sas_port->port->dev, + "sas_address(0x%016llx), old: port_id %d phy_mask 0x%x, new: port_id %d phy_mask:0x%x\n", + mr_sas_port->remote_identify.sas_address, + mr_sas_port->hba_port->port_id, mr_sas_port->phy_mask, + h_port->iounit_port_id, h_port->phy_mask); + + mr_sas_port->hba_port->port_id = h_port->iounit_port_id; + mr_sas_port->hba_port->flags &= ~MPI3MR_HBA_PORT_FLAG_DIRTY; + + /* Get the newly added phys bit map & removed phys bit map */ + phy_mask_xor = mr_sas_port->phy_mask ^ h_port->phy_mask; + phys_to_be_added = h_port->phy_mask & phy_mask_xor; + phys_to_be_removed = mr_sas_port->phy_mask & phy_mask_xor; + + /* + * Register these new phys to current mr_sas_port's port. + * if these phys are previously registered with another port + * then delete these phys from that port first. + */ + for_each_set_bit(i, (ulong *) &phys_to_be_added, BITS_PER_TYPE(u32)) { + mr_sas_phy = &mrioc->sas_hba.phy[i]; + if (mr_sas_phy->phy_belongs_to_port) + mpi3mr_del_phy_from_an_existing_port(mrioc, + &mrioc->sas_hba, mr_sas_phy); + mpi3mr_add_phy_to_an_existing_port(mrioc, + &mrioc->sas_hba, mr_sas_phy, + mr_sas_port->remote_identify.sas_address, + mr_sas_port->hba_port); + } + + /* Delete the phys which are not part of current mr_sas_port's port. */ + for_each_set_bit(i, (ulong *) &phys_to_be_removed, BITS_PER_TYPE(u32)) { + mr_sas_phy = &mrioc->sas_hba.phy[i]; + if (mr_sas_phy->phy_belongs_to_port) + mpi3mr_del_phy_from_an_existing_port(mrioc, + &mrioc->sas_hba, mr_sas_phy); + } +} + +/** + * mpi3mr_refresh_sas_ports - update host's sas ports during reset + * @mrioc: Adapter instance reference + * + * Update the host's sas ports during reset by checking whether + * sas ports are still intact or not. Add/remove phys if any hba + * phys are (moved in)/(moved out) of sas port. Also update + * io_unit_port if it got changed during reset. + * + * Return: Nothing. + */ +void +mpi3mr_refresh_sas_ports(struct mpi3mr_ioc *mrioc) +{ + struct host_port h_port[32]; + int i, j, found, host_port_count = 0, port_idx; + u16 sz, attached_handle, ioc_status; + struct mpi3_sas_io_unit_page0 *sas_io_unit_pg0 = NULL; + struct mpi3_device_page0 dev_pg0; + struct mpi3_device0_sas_sata_format *sasinf; + struct mpi3mr_sas_port *mr_sas_port; + + sz = offsetof(struct mpi3_sas_io_unit_page0, phy_data) + + (mrioc->sas_hba.num_phys * + sizeof(struct mpi3_sas_io_unit0_phy_data)); + sas_io_unit_pg0 = kzalloc(sz, GFP_KERNEL); + if (!sas_io_unit_pg0) + return; + if (mpi3mr_cfg_get_sas_io_unit_pg0(mrioc, sas_io_unit_pg0, sz)) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + goto out; + } + + /* Create a new expander port table */ + for (i = 0; i < mrioc->sas_hba.num_phys; i++) { + attached_handle = le16_to_cpu( + sas_io_unit_pg0->phy_data[i].attached_dev_handle); + if (!attached_handle) + continue; + found = 0; + for (j = 0; j < host_port_count; j++) { + if (h_port[j].handle == attached_handle) { + h_port[j].phy_mask |= (1 << i); + found = 1; + break; + } + } + if (found) + continue; + if ((mpi3mr_cfg_get_dev_pg0(mrioc, &ioc_status, &dev_pg0, + sizeof(dev_pg0), MPI3_DEVICE_PGAD_FORM_HANDLE, + attached_handle))) { + dprint_reset(mrioc, + "failed to read dev_pg0 for handle(0x%04x) at %s:%d/%s()!\n", + attached_handle, __FILE__, __LINE__, __func__); + continue; + } + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { + dprint_reset(mrioc, + "ioc_status(0x%x) while reading dev_pg0 for handle(0x%04x) at %s:%d/%s()!\n", + ioc_status, attached_handle, + __FILE__, __LINE__, __func__); + continue; + } + sasinf = &dev_pg0.device_specific.sas_sata_format; + + port_idx = host_port_count; + h_port[port_idx].sas_address = le64_to_cpu(sasinf->sas_address); + h_port[port_idx].handle = attached_handle; + h_port[port_idx].phy_mask = (1 << i); + h_port[port_idx].iounit_port_id = sas_io_unit_pg0->phy_data[i].io_unit_port; + h_port[port_idx].lowest_phy = sasinf->phy_num; + h_port[port_idx].used = 0; + host_port_count++; + } + + if (!host_port_count) + goto out; + + if (mrioc->logging_level & MPI3_DEBUG_RESET) { + ioc_info(mrioc, "Host port details before reset\n"); + list_for_each_entry(mr_sas_port, &mrioc->sas_hba.sas_port_list, + port_list) { + ioc_info(mrioc, + "port_id:%d, sas_address:(0x%016llx), phy_mask:(0x%x), lowest phy id:%d\n", + mr_sas_port->hba_port->port_id, + mr_sas_port->remote_identify.sas_address, + mr_sas_port->phy_mask, mr_sas_port->lowest_phy); + } + mr_sas_port = NULL; + ioc_info(mrioc, "Host port details after reset\n"); + for (i = 0; i < host_port_count; i++) { + ioc_info(mrioc, + "port_id:%d, sas_address:(0x%016llx), phy_mask:(0x%x), lowest phy id:%d\n", + h_port[i].iounit_port_id, h_port[i].sas_address, + h_port[i].phy_mask, h_port[i].lowest_phy); + } + } + + /* mark all host sas port entries as dirty */ + list_for_each_entry(mr_sas_port, &mrioc->sas_hba.sas_port_list, + port_list) { + mr_sas_port->marked_responding = 0; + mr_sas_port->hba_port->flags |= MPI3MR_HBA_PORT_FLAG_DIRTY; + } + + /* First check for matching lowest phy */ + for (i = 0; i < host_port_count; i++) { + mr_sas_port = NULL; + list_for_each_entry(mr_sas_port, &mrioc->sas_hba.sas_port_list, + port_list) { + if (mr_sas_port->marked_responding) + continue; + if (h_port[i].sas_address != mr_sas_port->remote_identify.sas_address) + continue; + if (h_port[i].lowest_phy == mr_sas_port->lowest_phy) { + mpi3mr_update_mr_sas_port(mrioc, &h_port[i], mr_sas_port); + break; + } + } + } + + /* In case if lowest phy is got enabled or disabled during reset */ + for (i = 0; i < host_port_count; i++) { + if (h_port[i].used) + continue; + mr_sas_port = NULL; + list_for_each_entry(mr_sas_port, &mrioc->sas_hba.sas_port_list, + port_list) { + if (mr_sas_port->marked_responding) + continue; + if (h_port[i].sas_address != mr_sas_port->remote_identify.sas_address) + continue; + if (h_port[i].phy_mask & mr_sas_port->phy_mask) { + mpi3mr_update_mr_sas_port(mrioc, &h_port[i], mr_sas_port); + break; + } + } + } + + /* In case if expander cable is removed & connected to another HBA port during reset */ + for (i = 0; i < host_port_count; i++) { + if (h_port[i].used) + continue; + mr_sas_port = NULL; + list_for_each_entry(mr_sas_port, &mrioc->sas_hba.sas_port_list, + port_list) { + if (mr_sas_port->marked_responding) + continue; + if (h_port[i].sas_address != mr_sas_port->remote_identify.sas_address) + continue; + mpi3mr_update_mr_sas_port(mrioc, &h_port[i], mr_sas_port); + break; + } + } +out: + kfree(sas_io_unit_pg0); +} + +/** + * mpi3mr_refresh_expanders - Refresh expander device exposure + * @mrioc: Adapter instance reference + * + * This is executed post controller reset to identify any + * missing expander devices during reset and remove from the upper layers + * or expose any newly detected expander device to the upper layers. + * + * Return: Nothing. + */ +void +mpi3mr_refresh_expanders(struct mpi3mr_ioc *mrioc) +{ + struct mpi3mr_sas_node *sas_expander, *sas_expander_next; + struct mpi3_sas_expander_page0 expander_pg0; + u16 ioc_status, handle; + u64 sas_address; + int i; + unsigned long flags; + struct mpi3mr_hba_port *hba_port; + + spin_lock_irqsave(&mrioc->sas_node_lock, flags); + list_for_each_entry(sas_expander, &mrioc->sas_expander_list, list) { + sas_expander->non_responding = 1; + } + spin_unlock_irqrestore(&mrioc->sas_node_lock, flags); + + sas_expander = NULL; + + handle = 0xffff; + + /* Search for responding expander devices and add them if they are newly got added */ + while (true) { + if ((mpi3mr_cfg_get_sas_exp_pg0(mrioc, &ioc_status, &expander_pg0, + sizeof(struct mpi3_sas_expander_page0), + MPI3_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE, handle))) { + dprint_reset(mrioc, + "failed to read exp pg0 for handle(0x%04x) at %s:%d/%s()!\n", + handle, __FILE__, __LINE__, __func__); + break; + } + + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { + dprint_reset(mrioc, + "ioc_status(0x%x) while reading exp pg0 for handle:(0x%04x), %s:%d/%s()!\n", + ioc_status, handle, __FILE__, __LINE__, __func__); + break; + } + + handle = le16_to_cpu(expander_pg0.dev_handle); + sas_address = le64_to_cpu(expander_pg0.sas_address); + hba_port = mpi3mr_get_hba_port_by_id(mrioc, expander_pg0.io_unit_port); + + if (!hba_port) { + mpi3mr_sas_host_refresh(mrioc); + mpi3mr_expander_add(mrioc, handle); + continue; + } + + spin_lock_irqsave(&mrioc->sas_node_lock, flags); + sas_expander = + mpi3mr_expander_find_by_sas_address(mrioc, + sas_address, hba_port); + spin_unlock_irqrestore(&mrioc->sas_node_lock, flags); + + if (!sas_expander) { + mpi3mr_sas_host_refresh(mrioc); + mpi3mr_expander_add(mrioc, handle); + continue; + } + + sas_expander->non_responding = 0; + if (sas_expander->handle == handle) + continue; + + sas_expander->handle = handle; + for (i = 0 ; i < sas_expander->num_phys ; i++) + sas_expander->phy[i].handle = handle; + } + + /* + * Delete non responding expander devices and the corresponding + * hba_port if the non responding expander device's parent device + * is a host node. + */ + sas_expander = NULL; + spin_lock_irqsave(&mrioc->sas_node_lock, flags); + list_for_each_entry_safe_reverse(sas_expander, sas_expander_next, + &mrioc->sas_expander_list, list) { + if (sas_expander->non_responding) { + spin_unlock_irqrestore(&mrioc->sas_node_lock, flags); + mpi3mr_expander_node_remove(mrioc, sas_expander); + spin_lock_irqsave(&mrioc->sas_node_lock, flags); + } + } + spin_unlock_irqrestore(&mrioc->sas_node_lock, flags); +} + +/** + * mpi3mr_expander_node_add - insert an expander to the list. + * @mrioc: Adapter instance reference + * @sas_expander: Expander sas node + * Context: This function will acquire sas_node_lock. + * + * Adding new object to the ioc->sas_expander_list. + * + * Return: None. + */ +static void mpi3mr_expander_node_add(struct mpi3mr_ioc *mrioc, + struct mpi3mr_sas_node *sas_expander) +{ + unsigned long flags; + + spin_lock_irqsave(&mrioc->sas_node_lock, flags); + list_add_tail(&sas_expander->list, &mrioc->sas_expander_list); + spin_unlock_irqrestore(&mrioc->sas_node_lock, flags); +} + +/** + * mpi3mr_expander_add - Create expander object + * @mrioc: Adapter instance reference + * @handle: Expander firmware device handle + * + * This function creating expander object, stored in + * sas_expander_list and expose it to the SAS transport + * layer. + * + * Return: 0 for success, non-zero for failure. + */ +int mpi3mr_expander_add(struct mpi3mr_ioc *mrioc, u16 handle) +{ + struct mpi3mr_sas_node *sas_expander; + struct mpi3mr_enclosure_node *enclosure_dev; + struct mpi3_sas_expander_page0 expander_pg0; + struct mpi3_sas_expander_page1 expander_pg1; + u16 ioc_status, parent_handle, temp_handle; + u64 sas_address, sas_address_parent = 0; + int i; + unsigned long flags; + u8 port_id, link_rate; + struct mpi3mr_sas_port *mr_sas_port = NULL; + struct mpi3mr_hba_port *hba_port; + u32 phynum_handle; + int rc = 0; + + if (!handle) + return -1; + + if (mrioc->reset_in_progress) + return -1; + + if ((mpi3mr_cfg_get_sas_exp_pg0(mrioc, &ioc_status, &expander_pg0, + sizeof(expander_pg0), MPI3_SAS_EXPAND_PGAD_FORM_HANDLE, handle))) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -1; + } + + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -1; + } + + parent_handle = le16_to_cpu(expander_pg0.parent_dev_handle); + if (mpi3mr_get_sas_address(mrioc, parent_handle, &sas_address_parent) + != 0) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -1; + } + + port_id = expander_pg0.io_unit_port; + hba_port = mpi3mr_get_hba_port_by_id(mrioc, port_id); + if (!hba_port) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -1; + } + + if (sas_address_parent != mrioc->sas_hba.sas_address) { + spin_lock_irqsave(&mrioc->sas_node_lock, flags); + sas_expander = + mpi3mr_expander_find_by_sas_address(mrioc, + sas_address_parent, hba_port); + spin_unlock_irqrestore(&mrioc->sas_node_lock, flags); + if (!sas_expander) { + rc = mpi3mr_expander_add(mrioc, parent_handle); + if (rc != 0) + return rc; + } else { + /* + * When there is a parent expander present, update it's + * phys where child expander is connected with the link + * speed, attached dev handle and sas address. + */ + for (i = 0 ; i < sas_expander->num_phys ; i++) { + phynum_handle = + (i << MPI3_SAS_EXPAND_PGAD_PHYNUM_SHIFT) | + parent_handle; + if (mpi3mr_cfg_get_sas_exp_pg1(mrioc, + &ioc_status, &expander_pg1, + sizeof(expander_pg1), + MPI3_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM, + phynum_handle)) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + rc = -1; + return rc; + } + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + rc = -1; + return rc; + } + temp_handle = le16_to_cpu( + expander_pg1.attached_dev_handle); + if (temp_handle != handle) + continue; + link_rate = (expander_pg1.negotiated_link_rate & + MPI3_SAS_NEG_LINK_RATE_LOGICAL_MASK) >> + MPI3_SAS_NEG_LINK_RATE_LOGICAL_SHIFT; + mpi3mr_update_links(mrioc, sas_address_parent, + handle, i, link_rate, hba_port); + } + } + } + + spin_lock_irqsave(&mrioc->sas_node_lock, flags); + sas_address = le64_to_cpu(expander_pg0.sas_address); + sas_expander = mpi3mr_expander_find_by_sas_address(mrioc, + sas_address, hba_port); + spin_unlock_irqrestore(&mrioc->sas_node_lock, flags); + + if (sas_expander) + return 0; + + sas_expander = kzalloc(sizeof(struct mpi3mr_sas_node), + GFP_KERNEL); + if (!sas_expander) + return -ENOMEM; + + sas_expander->handle = handle; + sas_expander->num_phys = expander_pg0.num_phys; + sas_expander->sas_address_parent = sas_address_parent; + sas_expander->sas_address = sas_address; + sas_expander->hba_port = hba_port; + + ioc_info(mrioc, + "expander_add: handle(0x%04x), parent(0x%04x), sas_addr(0x%016llx), phys(%d)\n", + handle, parent_handle, (unsigned long long) + sas_expander->sas_address, sas_expander->num_phys); + + if (!sas_expander->num_phys) { + rc = -1; + goto out_fail; + } + sas_expander->phy = kcalloc(sas_expander->num_phys, + sizeof(struct mpi3mr_sas_phy), GFP_KERNEL); + if (!sas_expander->phy) { + rc = -1; + goto out_fail; + } + + INIT_LIST_HEAD(&sas_expander->sas_port_list); + mr_sas_port = mpi3mr_sas_port_add(mrioc, handle, sas_address_parent, + sas_expander->hba_port); + if (!mr_sas_port) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + rc = -1; + goto out_fail; + } + sas_expander->parent_dev = &mr_sas_port->rphy->dev; + sas_expander->rphy = mr_sas_port->rphy; + + for (i = 0 ; i < sas_expander->num_phys ; i++) { + phynum_handle = (i << MPI3_SAS_EXPAND_PGAD_PHYNUM_SHIFT) | + handle; + if (mpi3mr_cfg_get_sas_exp_pg1(mrioc, &ioc_status, + &expander_pg1, sizeof(expander_pg1), + MPI3_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM, + phynum_handle)) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + rc = -1; + goto out_fail; + } + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + rc = -1; + goto out_fail; + } + + sas_expander->phy[i].handle = handle; + sas_expander->phy[i].phy_id = i; + sas_expander->phy[i].hba_port = hba_port; + + if ((mpi3mr_add_expander_phy(mrioc, &sas_expander->phy[i], + expander_pg1, sas_expander->parent_dev))) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + rc = -1; + goto out_fail; + } + } + + if (sas_expander->enclosure_handle) { + enclosure_dev = + mpi3mr_enclosure_find_by_handle(mrioc, + sas_expander->enclosure_handle); + if (enclosure_dev) + sas_expander->enclosure_logical_id = le64_to_cpu( + enclosure_dev->pg0.enclosure_logical_id); + } + + mpi3mr_expander_node_add(mrioc, sas_expander); + return 0; + +out_fail: + + if (mr_sas_port) + mpi3mr_sas_port_remove(mrioc, + sas_expander->sas_address, + sas_address_parent, sas_expander->hba_port); + kfree(sas_expander->phy); + kfree(sas_expander); + return rc; +} + +/** + * mpi3mr_expander_node_remove - recursive removal of expander. + * @mrioc: Adapter instance reference + * @sas_expander: Expander device object + * + * Removes expander object and freeing associated memory from + * the sas_expander_list and removes the same from SAS TL, if + * one of the attached device is an expander then it recursively + * removes the expander device too. + * + * Return nothing. + */ +void mpi3mr_expander_node_remove(struct mpi3mr_ioc *mrioc, + struct mpi3mr_sas_node *sas_expander) +{ + struct mpi3mr_sas_port *mr_sas_port, *next; + unsigned long flags; + u8 port_id; + + /* remove sibling ports attached to this expander */ + list_for_each_entry_safe(mr_sas_port, next, + &sas_expander->sas_port_list, port_list) { + if (mrioc->reset_in_progress) + return; + if (mr_sas_port->remote_identify.device_type == + SAS_END_DEVICE) + mpi3mr_remove_device_by_sas_address(mrioc, + mr_sas_port->remote_identify.sas_address, + mr_sas_port->hba_port); + else if (mr_sas_port->remote_identify.device_type == + SAS_EDGE_EXPANDER_DEVICE || + mr_sas_port->remote_identify.device_type == + SAS_FANOUT_EXPANDER_DEVICE) + mpi3mr_expander_remove(mrioc, + mr_sas_port->remote_identify.sas_address, + mr_sas_port->hba_port); + } + + port_id = sas_expander->hba_port->port_id; + mpi3mr_sas_port_remove(mrioc, sas_expander->sas_address, + sas_expander->sas_address_parent, sas_expander->hba_port); + + ioc_info(mrioc, "expander_remove: handle(0x%04x), sas_addr(0x%016llx), port:%d\n", + sas_expander->handle, (unsigned long long) + sas_expander->sas_address, port_id); + + spin_lock_irqsave(&mrioc->sas_node_lock, flags); + list_del(&sas_expander->list); + spin_unlock_irqrestore(&mrioc->sas_node_lock, flags); + + kfree(sas_expander->phy); + kfree(sas_expander); +} + +/** + * mpi3mr_expander_remove - Remove expander object + * @mrioc: Adapter instance reference + * @sas_address: Remove expander sas_address + * @hba_port: HBA port reference + * + * This function remove expander object, stored in + * mrioc->sas_expander_list and removes it from the SAS TL by + * calling mpi3mr_expander_node_remove(). + * + * Return: None + */ +void mpi3mr_expander_remove(struct mpi3mr_ioc *mrioc, u64 sas_address, + struct mpi3mr_hba_port *hba_port) +{ + struct mpi3mr_sas_node *sas_expander; + unsigned long flags; + + if (mrioc->reset_in_progress) + return; + + if (!hba_port) + return; + + spin_lock_irqsave(&mrioc->sas_node_lock, flags); + sas_expander = mpi3mr_expander_find_by_sas_address(mrioc, sas_address, + hba_port); + spin_unlock_irqrestore(&mrioc->sas_node_lock, flags); + if (sas_expander) + mpi3mr_expander_node_remove(mrioc, sas_expander); + +} + +/** + * mpi3mr_get_sas_negotiated_logical_linkrate - get linkrate + * @mrioc: Adapter instance reference + * @tgtdev: Target device + * + * This function identifies whether the target device is + * attached directly or through expander and issues sas phy + * page0 or expander phy page1 and gets the link rate, if there + * is any failure in reading the pages then this returns link + * rate of 1.5. + * + * Return: logical link rate. + */ +static u8 mpi3mr_get_sas_negotiated_logical_linkrate(struct mpi3mr_ioc *mrioc, + struct mpi3mr_tgt_dev *tgtdev) +{ + u8 link_rate = MPI3_SAS_NEG_LINK_RATE_1_5, phy_number; + struct mpi3_sas_expander_page1 expander_pg1; + struct mpi3_sas_phy_page0 phy_pg0; + u32 phynum_handle; + u16 ioc_status; + + phy_number = tgtdev->dev_spec.sas_sata_inf.phy_id; + if (!(tgtdev->devpg0_flag & MPI3_DEVICE0_FLAGS_ATT_METHOD_DIR_ATTACHED)) { + phynum_handle = ((phy_number<<MPI3_SAS_EXPAND_PGAD_PHYNUM_SHIFT) + | tgtdev->parent_handle); + if (mpi3mr_cfg_get_sas_exp_pg1(mrioc, &ioc_status, + &expander_pg1, sizeof(expander_pg1), + MPI3_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM, + phynum_handle)) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + goto out; + } + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + goto out; + } + link_rate = (expander_pg1.negotiated_link_rate & + MPI3_SAS_NEG_LINK_RATE_LOGICAL_MASK) >> + MPI3_SAS_NEG_LINK_RATE_LOGICAL_SHIFT; + goto out; + } + if (mpi3mr_cfg_get_sas_phy_pg0(mrioc, &ioc_status, &phy_pg0, + sizeof(struct mpi3_sas_phy_page0), + MPI3_SAS_PHY_PGAD_FORM_PHY_NUMBER, phy_number)) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + goto out; + } + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + goto out; + } + link_rate = (phy_pg0.negotiated_link_rate & + MPI3_SAS_NEG_LINK_RATE_LOGICAL_MASK) >> + MPI3_SAS_NEG_LINK_RATE_LOGICAL_SHIFT; +out: + return link_rate; +} + +/** + * mpi3mr_report_tgtdev_to_sas_transport - expose dev to SAS TL + * @mrioc: Adapter instance reference + * @tgtdev: Target device + * + * This function exposes the target device after + * preparing host_phy, setting up link rate etc. + * + * Return: 0 on success, non-zero for failure. + */ +int mpi3mr_report_tgtdev_to_sas_transport(struct mpi3mr_ioc *mrioc, + struct mpi3mr_tgt_dev *tgtdev) +{ + int retval = 0; + u8 link_rate, parent_phy_number; + u64 sas_address_parent, sas_address; + struct mpi3mr_hba_port *hba_port; + u8 port_id; + + if ((tgtdev->dev_type != MPI3_DEVICE_DEVFORM_SAS_SATA) || + !mrioc->sas_transport_enabled) + return -1; + + sas_address = tgtdev->dev_spec.sas_sata_inf.sas_address; + if (!mrioc->sas_hba.num_phys) + mpi3mr_sas_host_add(mrioc); + else + mpi3mr_sas_host_refresh(mrioc); + + if (mpi3mr_get_sas_address(mrioc, tgtdev->parent_handle, + &sas_address_parent) != 0) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -1; + } + tgtdev->dev_spec.sas_sata_inf.sas_address_parent = sas_address_parent; + + parent_phy_number = tgtdev->dev_spec.sas_sata_inf.phy_id; + port_id = tgtdev->io_unit_port; + + hba_port = mpi3mr_get_hba_port_by_id(mrioc, port_id); + if (!hba_port) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -1; + } + tgtdev->dev_spec.sas_sata_inf.hba_port = hba_port; + + link_rate = mpi3mr_get_sas_negotiated_logical_linkrate(mrioc, tgtdev); + + mpi3mr_update_links(mrioc, sas_address_parent, tgtdev->dev_handle, + parent_phy_number, link_rate, hba_port); + + tgtdev->host_exposed = 1; + if (!mpi3mr_sas_port_add(mrioc, tgtdev->dev_handle, + sas_address_parent, hba_port)) { + retval = -1; + } else if ((!tgtdev->starget) && (!mrioc->is_driver_loading)) { + mpi3mr_sas_port_remove(mrioc, sas_address, + sas_address_parent, hba_port); + retval = -1; + } + if (retval) { + tgtdev->dev_spec.sas_sata_inf.hba_port = NULL; + tgtdev->host_exposed = 0; + } + return retval; +} + +/** + * mpi3mr_remove_tgtdev_from_sas_transport - remove from SAS TL + * @mrioc: Adapter instance reference + * @tgtdev: Target device + * + * This function removes the target device + * + * Return: None. + */ +void mpi3mr_remove_tgtdev_from_sas_transport(struct mpi3mr_ioc *mrioc, + struct mpi3mr_tgt_dev *tgtdev) +{ + u64 sas_address_parent, sas_address; + struct mpi3mr_hba_port *hba_port; + + if ((tgtdev->dev_type != MPI3_DEVICE_DEVFORM_SAS_SATA) || + !mrioc->sas_transport_enabled) + return; + + hba_port = tgtdev->dev_spec.sas_sata_inf.hba_port; + sas_address = tgtdev->dev_spec.sas_sata_inf.sas_address; + sas_address_parent = tgtdev->dev_spec.sas_sata_inf.sas_address_parent; + mpi3mr_sas_port_remove(mrioc, sas_address, sas_address_parent, + hba_port); + tgtdev->host_exposed = 0; + tgtdev->dev_spec.sas_sata_inf.hba_port = NULL; +} + +/** + * mpi3mr_get_port_id_by_sas_phy - Get port ID of the given phy + * @phy: SAS transport layer phy object + * + * Return: Port number for valid ID else 0xFFFF + */ +static inline u8 mpi3mr_get_port_id_by_sas_phy(struct sas_phy *phy) +{ + u8 port_id = 0xFF; + struct mpi3mr_hba_port *hba_port = phy->hostdata; + + if (hba_port) + port_id = hba_port->port_id; + + return port_id; +} + +/** + * mpi3mr_get_port_id_by_rphy - Get Port number from SAS rphy + * + * @mrioc: Adapter instance reference + * @rphy: SAS transport layer remote phy object + * + * Retrieves HBA port number in which the device pointed by the + * rphy object is attached with. + * + * Return: Valid port number on success else OxFFFF. + */ +static u8 mpi3mr_get_port_id_by_rphy(struct mpi3mr_ioc *mrioc, struct sas_rphy *rphy) +{ + struct mpi3mr_sas_node *sas_expander; + struct mpi3mr_tgt_dev *tgtdev; + unsigned long flags; + u8 port_id = 0xFF; + + if (!rphy) + return port_id; + + if (rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE || + rphy->identify.device_type == SAS_FANOUT_EXPANDER_DEVICE) { + spin_lock_irqsave(&mrioc->sas_node_lock, flags); + list_for_each_entry(sas_expander, &mrioc->sas_expander_list, + list) { + if (sas_expander->rphy == rphy) { + port_id = sas_expander->hba_port->port_id; + break; + } + } + spin_unlock_irqrestore(&mrioc->sas_node_lock, flags); + } else if (rphy->identify.device_type == SAS_END_DEVICE) { + spin_lock_irqsave(&mrioc->tgtdev_lock, flags); + + tgtdev = __mpi3mr_get_tgtdev_by_addr_and_rphy(mrioc, + rphy->identify.sas_address, rphy); + if (tgtdev && tgtdev->dev_spec.sas_sata_inf.hba_port) { + port_id = + tgtdev->dev_spec.sas_sata_inf.hba_port->port_id; + mpi3mr_tgtdev_put(tgtdev); + } + spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags); + } + return port_id; +} + +static inline struct mpi3mr_ioc *phy_to_mrioc(struct sas_phy *phy) +{ + struct Scsi_Host *shost = dev_to_shost(phy->dev.parent); + + return shost_priv(shost); +} + +static inline struct mpi3mr_ioc *rphy_to_mrioc(struct sas_rphy *rphy) +{ + struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent->parent); + + return shost_priv(shost); +} + +/* report phy error log structure */ +struct phy_error_log_request { + u8 smp_frame_type; /* 0x40 */ + u8 function; /* 0x11 */ + u8 allocated_response_length; + u8 request_length; /* 02 */ + u8 reserved_1[5]; + u8 phy_identifier; + u8 reserved_2[2]; +}; + +/* report phy error log reply structure */ +struct phy_error_log_reply { + u8 smp_frame_type; /* 0x41 */ + u8 function; /* 0x11 */ + u8 function_result; + u8 response_length; + __be16 expander_change_count; + u8 reserved_1[3]; + u8 phy_identifier; + u8 reserved_2[2]; + __be32 invalid_dword; + __be32 running_disparity_error; + __be32 loss_of_dword_sync; + __be32 phy_reset_problem; +}; + + +/** + * mpi3mr_get_expander_phy_error_log - return expander counters: + * @mrioc: Adapter instance reference + * @phy: The SAS transport layer phy object + * + * Return: 0 for success, non-zero for failure. + * + */ +static int mpi3mr_get_expander_phy_error_log(struct mpi3mr_ioc *mrioc, + struct sas_phy *phy) +{ + struct mpi3_smp_passthrough_request mpi_request; + struct mpi3_smp_passthrough_reply mpi_reply; + struct phy_error_log_request *phy_error_log_request; + struct phy_error_log_reply *phy_error_log_reply; + int rc; + void *psge; + void *data_out = NULL; + dma_addr_t data_out_dma, data_in_dma; + u32 data_out_sz, data_in_sz, sz; + u8 sgl_flags = MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST; + u16 request_sz = sizeof(struct mpi3_smp_passthrough_request); + u16 reply_sz = sizeof(struct mpi3_smp_passthrough_reply); + u16 ioc_status; + + if (mrioc->reset_in_progress) { + ioc_err(mrioc, "%s: host reset in progress!\n", __func__); + return -EFAULT; + } + + data_out_sz = sizeof(struct phy_error_log_request); + data_in_sz = sizeof(struct phy_error_log_reply); + sz = data_out_sz + data_in_sz; + data_out = dma_alloc_coherent(&mrioc->pdev->dev, sz, &data_out_dma, + GFP_KERNEL); + if (!data_out) { + rc = -ENOMEM; + goto out; + } + + data_in_dma = data_out_dma + data_out_sz; + phy_error_log_reply = data_out + data_out_sz; + + rc = -EINVAL; + memset(data_out, 0, sz); + phy_error_log_request = data_out; + phy_error_log_request->smp_frame_type = 0x40; + phy_error_log_request->function = 0x11; + phy_error_log_request->request_length = 2; + phy_error_log_request->allocated_response_length = 0; + phy_error_log_request->phy_identifier = phy->number; + + memset(&mpi_request, 0, request_sz); + memset(&mpi_reply, 0, reply_sz); + mpi_request.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_TRANSPORT_CMDS); + mpi_request.function = MPI3_FUNCTION_SMP_PASSTHROUGH; + mpi_request.io_unit_port = (u8) mpi3mr_get_port_id_by_sas_phy(phy); + mpi_request.sas_address = cpu_to_le64(phy->identify.sas_address); + + psge = &mpi_request.request_sge; + mpi3mr_add_sg_single(psge, sgl_flags, data_out_sz, data_out_dma); + + psge = &mpi_request.response_sge; + mpi3mr_add_sg_single(psge, sgl_flags, data_in_sz, data_in_dma); + + dprint_transport_info(mrioc, + "sending phy error log SMP request to sas_address(0x%016llx), phy_id(%d)\n", + (unsigned long long)phy->identify.sas_address, phy->number); + + if (mpi3mr_post_transport_req(mrioc, &mpi_request, request_sz, + &mpi_reply, reply_sz, MPI3MR_INTADMCMD_TIMEOUT, &ioc_status)) + goto out; + + dprint_transport_info(mrioc, + "phy error log SMP request completed with ioc_status(0x%04x)\n", + ioc_status); + + if (ioc_status == MPI3_IOCSTATUS_SUCCESS) { + dprint_transport_info(mrioc, + "phy error log - reply data transfer size(%d)\n", + le16_to_cpu(mpi_reply.response_data_length)); + + if (le16_to_cpu(mpi_reply.response_data_length) != + sizeof(struct phy_error_log_reply)) + goto out; + + dprint_transport_info(mrioc, + "phy error log - function_result(%d)\n", + phy_error_log_reply->function_result); + + phy->invalid_dword_count = + be32_to_cpu(phy_error_log_reply->invalid_dword); + phy->running_disparity_error_count = + be32_to_cpu(phy_error_log_reply->running_disparity_error); + phy->loss_of_dword_sync_count = + be32_to_cpu(phy_error_log_reply->loss_of_dword_sync); + phy->phy_reset_problem_count = + be32_to_cpu(phy_error_log_reply->phy_reset_problem); + rc = 0; + } + +out: + if (data_out) + dma_free_coherent(&mrioc->pdev->dev, sz, data_out, + data_out_dma); + + return rc; +} + +/** + * mpi3mr_transport_get_linkerrors - return phy error counters + * @phy: The SAS transport layer phy object + * + * This function retrieves the phy error log information of the + * HBA or expander for which the phy belongs to + * + * Return: 0 for success, non-zero for failure. + */ +static int mpi3mr_transport_get_linkerrors(struct sas_phy *phy) +{ + struct mpi3mr_ioc *mrioc = phy_to_mrioc(phy); + struct mpi3_sas_phy_page1 phy_pg1; + int rc = 0; + u16 ioc_status; + + rc = mpi3mr_parent_present(mrioc, phy); + if (rc) + return rc; + + if (phy->identify.sas_address != mrioc->sas_hba.sas_address) + return mpi3mr_get_expander_phy_error_log(mrioc, phy); + + memset(&phy_pg1, 0, sizeof(struct mpi3_sas_phy_page1)); + /* get hba phy error logs */ + if ((mpi3mr_cfg_get_sas_phy_pg1(mrioc, &ioc_status, &phy_pg1, + sizeof(struct mpi3_sas_phy_page1), + MPI3_SAS_PHY_PGAD_FORM_PHY_NUMBER, phy->number))) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -ENXIO; + } + + if (ioc_status != MPI3_IOCSTATUS_SUCCESS) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + return -ENXIO; + } + phy->invalid_dword_count = le32_to_cpu(phy_pg1.invalid_dword_count); + phy->running_disparity_error_count = + le32_to_cpu(phy_pg1.running_disparity_error_count); + phy->loss_of_dword_sync_count = + le32_to_cpu(phy_pg1.loss_dword_synch_count); + phy->phy_reset_problem_count = + le32_to_cpu(phy_pg1.phy_reset_problem_count); + return 0; +} + +/** + * mpi3mr_transport_get_enclosure_identifier - Get Enclosure ID + * @rphy: The SAS transport layer remote phy object + * @identifier: Enclosure identifier to be returned + * + * Returns the enclosure id for the device pointed by the remote + * phy object. + * + * Return: 0 on success or -ENXIO + */ +static int +mpi3mr_transport_get_enclosure_identifier(struct sas_rphy *rphy, + u64 *identifier) +{ + struct mpi3mr_ioc *mrioc = rphy_to_mrioc(rphy); + struct mpi3mr_tgt_dev *tgtdev = NULL; + unsigned long flags; + int rc; + + spin_lock_irqsave(&mrioc->tgtdev_lock, flags); + tgtdev = __mpi3mr_get_tgtdev_by_addr_and_rphy(mrioc, + rphy->identify.sas_address, rphy); + if (tgtdev) { + *identifier = + tgtdev->enclosure_logical_id; + rc = 0; + mpi3mr_tgtdev_put(tgtdev); + } else { + *identifier = 0; + rc = -ENXIO; + } + spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags); + + return rc; +} + +/** + * mpi3mr_transport_get_bay_identifier - Get bay ID + * @rphy: The SAS transport layer remote phy object + * + * Returns the slot id for the device pointed by the remote phy + * object. + * + * Return: Valid slot ID on success or -ENXIO + */ +static int +mpi3mr_transport_get_bay_identifier(struct sas_rphy *rphy) +{ + struct mpi3mr_ioc *mrioc = rphy_to_mrioc(rphy); + struct mpi3mr_tgt_dev *tgtdev = NULL; + unsigned long flags; + int rc; + + spin_lock_irqsave(&mrioc->tgtdev_lock, flags); + tgtdev = __mpi3mr_get_tgtdev_by_addr_and_rphy(mrioc, + rphy->identify.sas_address, rphy); + if (tgtdev) { + rc = tgtdev->slot; + mpi3mr_tgtdev_put(tgtdev); + } else + rc = -ENXIO; + spin_unlock_irqrestore(&mrioc->tgtdev_lock, flags); + + return rc; +} + +/* phy control request structure */ +struct phy_control_request { + u8 smp_frame_type; /* 0x40 */ + u8 function; /* 0x91 */ + u8 allocated_response_length; + u8 request_length; /* 0x09 */ + u16 expander_change_count; + u8 reserved_1[3]; + u8 phy_identifier; + u8 phy_operation; + u8 reserved_2[13]; + u64 attached_device_name; + u8 programmed_min_physical_link_rate; + u8 programmed_max_physical_link_rate; + u8 reserved_3[6]; +}; + +/* phy control reply structure */ +struct phy_control_reply { + u8 smp_frame_type; /* 0x41 */ + u8 function; /* 0x11 */ + u8 function_result; + u8 response_length; +}; + +#define SMP_PHY_CONTROL_LINK_RESET (0x01) +#define SMP_PHY_CONTROL_HARD_RESET (0x02) +#define SMP_PHY_CONTROL_DISABLE (0x03) + +/** + * mpi3mr_expander_phy_control - expander phy control + * @mrioc: Adapter instance reference + * @phy: The SAS transport layer phy object + * @phy_operation: The phy operation to be executed + * + * Issues SMP passthru phy control request to execute a specific + * phy operation for a given expander device. + * + * Return: 0 for success, non-zero for failure. + */ +static int +mpi3mr_expander_phy_control(struct mpi3mr_ioc *mrioc, + struct sas_phy *phy, u8 phy_operation) +{ + struct mpi3_smp_passthrough_request mpi_request; + struct mpi3_smp_passthrough_reply mpi_reply; + struct phy_control_request *phy_control_request; + struct phy_control_reply *phy_control_reply; + int rc; + void *psge; + void *data_out = NULL; + dma_addr_t data_out_dma; + dma_addr_t data_in_dma; + size_t data_in_sz; + size_t data_out_sz; + u8 sgl_flags = MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST; + u16 request_sz = sizeof(struct mpi3_smp_passthrough_request); + u16 reply_sz = sizeof(struct mpi3_smp_passthrough_reply); + u16 ioc_status; + u16 sz; + + if (mrioc->reset_in_progress) { + ioc_err(mrioc, "%s: host reset in progress!\n", __func__); + return -EFAULT; + } + + data_out_sz = sizeof(struct phy_control_request); + data_in_sz = sizeof(struct phy_control_reply); + sz = data_out_sz + data_in_sz; + data_out = dma_alloc_coherent(&mrioc->pdev->dev, sz, &data_out_dma, + GFP_KERNEL); + if (!data_out) { + rc = -ENOMEM; + goto out; + } + + data_in_dma = data_out_dma + data_out_sz; + phy_control_reply = data_out + data_out_sz; + + rc = -EINVAL; + memset(data_out, 0, sz); + + phy_control_request = data_out; + phy_control_request->smp_frame_type = 0x40; + phy_control_request->function = 0x91; + phy_control_request->request_length = 9; + phy_control_request->allocated_response_length = 0; + phy_control_request->phy_identifier = phy->number; + phy_control_request->phy_operation = phy_operation; + phy_control_request->programmed_min_physical_link_rate = + phy->minimum_linkrate << 4; + phy_control_request->programmed_max_physical_link_rate = + phy->maximum_linkrate << 4; + + memset(&mpi_request, 0, request_sz); + memset(&mpi_reply, 0, reply_sz); + mpi_request.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_TRANSPORT_CMDS); + mpi_request.function = MPI3_FUNCTION_SMP_PASSTHROUGH; + mpi_request.io_unit_port = (u8) mpi3mr_get_port_id_by_sas_phy(phy); + mpi_request.sas_address = cpu_to_le64(phy->identify.sas_address); + + psge = &mpi_request.request_sge; + mpi3mr_add_sg_single(psge, sgl_flags, data_out_sz, data_out_dma); + + psge = &mpi_request.response_sge; + mpi3mr_add_sg_single(psge, sgl_flags, data_in_sz, data_in_dma); + + dprint_transport_info(mrioc, + "sending phy control SMP request to sas_address(0x%016llx), phy_id(%d) opcode(%d)\n", + (unsigned long long)phy->identify.sas_address, phy->number, + phy_operation); + + if (mpi3mr_post_transport_req(mrioc, &mpi_request, request_sz, + &mpi_reply, reply_sz, MPI3MR_INTADMCMD_TIMEOUT, &ioc_status)) + goto out; + + dprint_transport_info(mrioc, + "phy control SMP request completed with ioc_status(0x%04x)\n", + ioc_status); + + if (ioc_status == MPI3_IOCSTATUS_SUCCESS) { + dprint_transport_info(mrioc, + "phy control - reply data transfer size(%d)\n", + le16_to_cpu(mpi_reply.response_data_length)); + + if (le16_to_cpu(mpi_reply.response_data_length) != + sizeof(struct phy_control_reply)) + goto out; + dprint_transport_info(mrioc, + "phy control - function_result(%d)\n", + phy_control_reply->function_result); + rc = 0; + } + out: + if (data_out) + dma_free_coherent(&mrioc->pdev->dev, sz, data_out, + data_out_dma); + + return rc; +} + +/** + * mpi3mr_transport_phy_reset - Reset a given phy + * @phy: The SAS transport layer phy object + * @hard_reset: Flag to indicate the type of reset + * + * Return: 0 for success, non-zero for failure. + */ +static int +mpi3mr_transport_phy_reset(struct sas_phy *phy, int hard_reset) +{ + struct mpi3mr_ioc *mrioc = phy_to_mrioc(phy); + struct mpi3_iounit_control_request mpi_request; + struct mpi3_iounit_control_reply mpi_reply; + u16 request_sz = sizeof(struct mpi3_iounit_control_request); + u16 reply_sz = sizeof(struct mpi3_iounit_control_reply); + int rc = 0; + u16 ioc_status; + + rc = mpi3mr_parent_present(mrioc, phy); + if (rc) + return rc; + + /* handle expander phys */ + if (phy->identify.sas_address != mrioc->sas_hba.sas_address) + return mpi3mr_expander_phy_control(mrioc, phy, + (hard_reset == 1) ? SMP_PHY_CONTROL_HARD_RESET : + SMP_PHY_CONTROL_LINK_RESET); + + /* handle hba phys */ + memset(&mpi_request, 0, request_sz); + mpi_request.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_TRANSPORT_CMDS); + mpi_request.function = MPI3_FUNCTION_IO_UNIT_CONTROL; + mpi_request.operation = MPI3_CTRL_OP_SAS_PHY_CONTROL; + mpi_request.param8[MPI3_CTRL_OP_SAS_PHY_CONTROL_PARAM8_ACTION_INDEX] = + (hard_reset ? MPI3_CTRL_ACTION_HARD_RESET : + MPI3_CTRL_ACTION_LINK_RESET); + mpi_request.param8[MPI3_CTRL_OP_SAS_PHY_CONTROL_PARAM8_PHY_INDEX] = + phy->number; + + dprint_transport_info(mrioc, + "sending phy reset request to sas_address(0x%016llx), phy_id(%d) hard_reset(%d)\n", + (unsigned long long)phy->identify.sas_address, phy->number, + hard_reset); + + if (mpi3mr_post_transport_req(mrioc, &mpi_request, request_sz, + &mpi_reply, reply_sz, MPI3MR_INTADMCMD_TIMEOUT, &ioc_status)) { + rc = -EAGAIN; + goto out; + } + + dprint_transport_info(mrioc, + "phy reset request completed with ioc_status(0x%04x)\n", + ioc_status); +out: + return rc; +} + +/** + * mpi3mr_transport_phy_enable - enable/disable phys + * @phy: The SAS transport layer phy object + * @enable: flag to enable/disable, enable phy when true + * + * This function enables/disables a given by executing required + * configuration page changes or expander phy control command + * + * Return: 0 for success, non-zero for failure. + */ +static int +mpi3mr_transport_phy_enable(struct sas_phy *phy, int enable) +{ + struct mpi3mr_ioc *mrioc = phy_to_mrioc(phy); + struct mpi3_sas_io_unit_page0 *sas_io_unit_pg0 = NULL; + struct mpi3_sas_io_unit_page1 *sas_io_unit_pg1 = NULL; + u16 sz; + int rc = 0; + int i, discovery_active; + + rc = mpi3mr_parent_present(mrioc, phy); + if (rc) + return rc; + + /* handle expander phys */ + if (phy->identify.sas_address != mrioc->sas_hba.sas_address) + return mpi3mr_expander_phy_control(mrioc, phy, + (enable == 1) ? SMP_PHY_CONTROL_LINK_RESET : + SMP_PHY_CONTROL_DISABLE); + + /* handle hba phys */ + sz = offsetof(struct mpi3_sas_io_unit_page0, phy_data) + + (mrioc->sas_hba.num_phys * + sizeof(struct mpi3_sas_io_unit0_phy_data)); + sas_io_unit_pg0 = kzalloc(sz, GFP_KERNEL); + if (!sas_io_unit_pg0) { + rc = -ENOMEM; + goto out; + } + if (mpi3mr_cfg_get_sas_io_unit_pg0(mrioc, sas_io_unit_pg0, sz)) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + rc = -ENXIO; + goto out; + } + + /* unable to enable/disable phys when discovery is active */ + for (i = 0, discovery_active = 0; i < mrioc->sas_hba.num_phys ; i++) { + if (sas_io_unit_pg0->phy_data[i].port_flags & + MPI3_SASIOUNIT0_PORTFLAGS_DISC_IN_PROGRESS) { + ioc_err(mrioc, + "discovery is active on port = %d, phy = %d\n" + "\tunable to enable/disable phys, try again later!\n", + sas_io_unit_pg0->phy_data[i].io_unit_port, i); + discovery_active = 1; + } + } + + if (discovery_active) { + rc = -EAGAIN; + goto out; + } + + if ((sas_io_unit_pg0->phy_data[phy->number].phy_flags & + (MPI3_SASIOUNIT0_PHYFLAGS_HOST_PHY | + MPI3_SASIOUNIT0_PHYFLAGS_VIRTUAL_PHY))) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + rc = -ENXIO; + goto out; + } + + /* read sas_iounit page 1 */ + sz = offsetof(struct mpi3_sas_io_unit_page1, phy_data) + + (mrioc->sas_hba.num_phys * + sizeof(struct mpi3_sas_io_unit1_phy_data)); + sas_io_unit_pg1 = kzalloc(sz, GFP_KERNEL); + if (!sas_io_unit_pg1) { + rc = -ENOMEM; + goto out; + } + + if (mpi3mr_cfg_get_sas_io_unit_pg1(mrioc, sas_io_unit_pg1, sz)) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + rc = -ENXIO; + goto out; + } + + if (enable) + sas_io_unit_pg1->phy_data[phy->number].phy_flags + &= ~MPI3_SASIOUNIT1_PHYFLAGS_PHY_DISABLE; + else + sas_io_unit_pg1->phy_data[phy->number].phy_flags + |= MPI3_SASIOUNIT1_PHYFLAGS_PHY_DISABLE; + + mpi3mr_cfg_set_sas_io_unit_pg1(mrioc, sas_io_unit_pg1, sz); + + /* link reset */ + if (enable) + mpi3mr_transport_phy_reset(phy, 0); + + out: + kfree(sas_io_unit_pg1); + kfree(sas_io_unit_pg0); + return rc; +} + +/** + * mpi3mr_transport_phy_speed - set phy min/max speed + * @phy: The SAS transport later phy object + * @rates: Rates defined as in sas_phy_linkrates + * + * This function sets the link rates given in the rates + * argument to the given phy by executing required configuration + * page changes or expander phy control command + * + * Return: 0 for success, non-zero for failure. + */ +static int +mpi3mr_transport_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates) +{ + struct mpi3mr_ioc *mrioc = phy_to_mrioc(phy); + struct mpi3_sas_io_unit_page1 *sas_io_unit_pg1 = NULL; + struct mpi3_sas_phy_page0 phy_pg0; + u16 sz, ioc_status; + int rc = 0; + + rc = mpi3mr_parent_present(mrioc, phy); + if (rc) + return rc; + + if (!rates->minimum_linkrate) + rates->minimum_linkrate = phy->minimum_linkrate; + else if (rates->minimum_linkrate < phy->minimum_linkrate_hw) + rates->minimum_linkrate = phy->minimum_linkrate_hw; + + if (!rates->maximum_linkrate) + rates->maximum_linkrate = phy->maximum_linkrate; + else if (rates->maximum_linkrate > phy->maximum_linkrate_hw) + rates->maximum_linkrate = phy->maximum_linkrate_hw; + + /* handle expander phys */ + if (phy->identify.sas_address != mrioc->sas_hba.sas_address) { + phy->minimum_linkrate = rates->minimum_linkrate; + phy->maximum_linkrate = rates->maximum_linkrate; + return mpi3mr_expander_phy_control(mrioc, phy, + SMP_PHY_CONTROL_LINK_RESET); + } + + /* handle hba phys */ + sz = offsetof(struct mpi3_sas_io_unit_page1, phy_data) + + (mrioc->sas_hba.num_phys * + sizeof(struct mpi3_sas_io_unit1_phy_data)); + sas_io_unit_pg1 = kzalloc(sz, GFP_KERNEL); + if (!sas_io_unit_pg1) { + rc = -ENOMEM; + goto out; + } + + if (mpi3mr_cfg_get_sas_io_unit_pg1(mrioc, sas_io_unit_pg1, sz)) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + rc = -ENXIO; + goto out; + } + + sas_io_unit_pg1->phy_data[phy->number].max_min_link_rate = + (rates->minimum_linkrate + (rates->maximum_linkrate << 4)); + + if (mpi3mr_cfg_set_sas_io_unit_pg1(mrioc, sas_io_unit_pg1, sz)) { + ioc_err(mrioc, "failure at %s:%d/%s()!\n", + __FILE__, __LINE__, __func__); + rc = -ENXIO; + goto out; + } + + /* link reset */ + mpi3mr_transport_phy_reset(phy, 0); + + /* read phy page 0, then update the rates in the sas transport phy */ + if (!mpi3mr_cfg_get_sas_phy_pg0(mrioc, &ioc_status, &phy_pg0, + sizeof(struct mpi3_sas_phy_page0), + MPI3_SAS_PHY_PGAD_FORM_PHY_NUMBER, phy->number) && + (ioc_status == MPI3_IOCSTATUS_SUCCESS)) { + phy->minimum_linkrate = mpi3mr_convert_phy_link_rate( + phy_pg0.programmed_link_rate & + MPI3_SAS_PRATE_MIN_RATE_MASK); + phy->maximum_linkrate = mpi3mr_convert_phy_link_rate( + phy_pg0.programmed_link_rate >> 4); + phy->negotiated_linkrate = + mpi3mr_convert_phy_link_rate( + (phy_pg0.negotiated_link_rate & + MPI3_SAS_NEG_LINK_RATE_LOGICAL_MASK) + >> MPI3_SAS_NEG_LINK_RATE_LOGICAL_SHIFT); + } + +out: + kfree(sas_io_unit_pg1); + return rc; +} + +/** + * mpi3mr_map_smp_buffer - map BSG dma buffer + * @dev: Generic device reference + * @buf: BSG buffer pointer + * @dma_addr: Physical address holder + * @dma_len: Mapped DMA buffer length. + * @p: Virtual address holder + * + * This function maps the DMAable buffer + * + * Return: 0 on success, non-zero on failure + */ +static int +mpi3mr_map_smp_buffer(struct device *dev, struct bsg_buffer *buf, + dma_addr_t *dma_addr, size_t *dma_len, void **p) +{ + /* Check if the request is split across multiple segments */ + if (buf->sg_cnt > 1) { + *p = dma_alloc_coherent(dev, buf->payload_len, dma_addr, + GFP_KERNEL); + if (!*p) + return -ENOMEM; + *dma_len = buf->payload_len; + } else { + if (!dma_map_sg(dev, buf->sg_list, 1, DMA_BIDIRECTIONAL)) + return -ENOMEM; + *dma_addr = sg_dma_address(buf->sg_list); + *dma_len = sg_dma_len(buf->sg_list); + *p = NULL; + } + + return 0; +} + +/** + * mpi3mr_unmap_smp_buffer - unmap BSG dma buffer + * @dev: Generic device reference + * @buf: BSG buffer pointer + * @dma_addr: Physical address to be unmapped + * @p: Virtual address + * + * This function unmaps the DMAable buffer + */ +static void +mpi3mr_unmap_smp_buffer(struct device *dev, struct bsg_buffer *buf, + dma_addr_t dma_addr, void *p) +{ + if (p) + dma_free_coherent(dev, buf->payload_len, p, dma_addr); + else + dma_unmap_sg(dev, buf->sg_list, 1, DMA_BIDIRECTIONAL); +} + +/** + * mpi3mr_transport_smp_handler - handler for smp passthru + * @job: BSG job reference + * @shost: SCSI host object reference + * @rphy: SAS transport rphy object pointing the expander + * + * This is used primarily by smp utils for sending the SMP + * commands to the expanders attached to the controller + */ +static void +mpi3mr_transport_smp_handler(struct bsg_job *job, struct Scsi_Host *shost, + struct sas_rphy *rphy) +{ + struct mpi3mr_ioc *mrioc = shost_priv(shost); + struct mpi3_smp_passthrough_request mpi_request; + struct mpi3_smp_passthrough_reply mpi_reply; + int rc; + void *psge; + dma_addr_t dma_addr_in; + dma_addr_t dma_addr_out; + void *addr_in = NULL; + void *addr_out = NULL; + size_t dma_len_in; + size_t dma_len_out; + unsigned int reslen = 0; + u16 request_sz = sizeof(struct mpi3_smp_passthrough_request); + u16 reply_sz = sizeof(struct mpi3_smp_passthrough_reply); + u8 sgl_flags = MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST; + u16 ioc_status; + + if (mrioc->reset_in_progress) { + ioc_err(mrioc, "%s: host reset in progress!\n", __func__); + rc = -EFAULT; + goto out; + } + + rc = mpi3mr_map_smp_buffer(&mrioc->pdev->dev, &job->request_payload, + &dma_addr_out, &dma_len_out, &addr_out); + if (rc) + goto out; + + if (addr_out) + sg_copy_to_buffer(job->request_payload.sg_list, + job->request_payload.sg_cnt, addr_out, + job->request_payload.payload_len); + + rc = mpi3mr_map_smp_buffer(&mrioc->pdev->dev, &job->reply_payload, + &dma_addr_in, &dma_len_in, &addr_in); + if (rc) + goto unmap_out; + + memset(&mpi_request, 0, request_sz); + memset(&mpi_reply, 0, reply_sz); + mpi_request.host_tag = cpu_to_le16(MPI3MR_HOSTTAG_TRANSPORT_CMDS); + mpi_request.function = MPI3_FUNCTION_SMP_PASSTHROUGH; + mpi_request.io_unit_port = (u8) mpi3mr_get_port_id_by_rphy(mrioc, rphy); + mpi_request.sas_address = ((rphy) ? + cpu_to_le64(rphy->identify.sas_address) : + cpu_to_le64(mrioc->sas_hba.sas_address)); + psge = &mpi_request.request_sge; + mpi3mr_add_sg_single(psge, sgl_flags, dma_len_out - 4, dma_addr_out); + + psge = &mpi_request.response_sge; + mpi3mr_add_sg_single(psge, sgl_flags, dma_len_in - 4, dma_addr_in); + + dprint_transport_info(mrioc, "sending SMP request\n"); + + rc = mpi3mr_post_transport_req(mrioc, &mpi_request, request_sz, + &mpi_reply, reply_sz, + MPI3MR_INTADMCMD_TIMEOUT, &ioc_status); + if (rc) + goto unmap_in; + + dprint_transport_info(mrioc, + "SMP request completed with ioc_status(0x%04x)\n", ioc_status); + + dprint_transport_info(mrioc, + "SMP request - reply data transfer size(%d)\n", + le16_to_cpu(mpi_reply.response_data_length)); + + memcpy(job->reply, &mpi_reply, reply_sz); + job->reply_len = reply_sz; + reslen = le16_to_cpu(mpi_reply.response_data_length); + + if (addr_in) + sg_copy_from_buffer(job->reply_payload.sg_list, + job->reply_payload.sg_cnt, addr_in, + job->reply_payload.payload_len); + + rc = 0; +unmap_in: + mpi3mr_unmap_smp_buffer(&mrioc->pdev->dev, &job->reply_payload, + dma_addr_in, addr_in); +unmap_out: + mpi3mr_unmap_smp_buffer(&mrioc->pdev->dev, &job->request_payload, + dma_addr_out, addr_out); +out: + bsg_job_done(job, rc, reslen); +} + +struct sas_function_template mpi3mr_transport_functions = { + .get_linkerrors = mpi3mr_transport_get_linkerrors, + .get_enclosure_identifier = mpi3mr_transport_get_enclosure_identifier, + .get_bay_identifier = mpi3mr_transport_get_bay_identifier, + .phy_reset = mpi3mr_transport_phy_reset, + .phy_enable = mpi3mr_transport_phy_enable, + .set_phy_speed = mpi3mr_transport_phy_speed, + .smp_handler = mpi3mr_transport_smp_handler, +}; + +struct scsi_transport_template *mpi3mr_transport_template; |