diff options
Diffstat (limited to 'drivers/scsi/mpt3sas')
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h | 231 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2_image.h | 32 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpi/mpi2_ioc.h | 27 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_base.c | 35 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_base.h | 3 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_config.c | 6 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_ctl.c | 42 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_scsih.c | 56 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_transport.c | 9 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_trigger_pages.h | 44 | ||||
| -rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_warpdrive.c | 3 |
11 files changed, 177 insertions, 311 deletions
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h index 4d0be5ab98..587f7d2482 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h @@ -643,18 +643,14 @@ typedef struct _MPI2_CHIP_REVISION_ID { /*Manufacturing Page 2 */ /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check Header.PageLength at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check Header.PageLength at + *runtime before using HwSettings[]. */ -#ifndef MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS -#define MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS (1) -#endif typedef struct _MPI2_CONFIG_PAGE_MAN_2 { MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ MPI2_CHIP_REVISION_ID ChipId; /*0x04 */ - U32 - HwSettings[MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS];/*0x08 */ + U32 HwSettings[]; /*0x08 */ } MPI2_CONFIG_PAGE_MAN_2, *PTR_MPI2_CONFIG_PAGE_MAN_2, Mpi2ManufacturingPage2_t, @@ -666,18 +662,14 @@ typedef struct _MPI2_CONFIG_PAGE_MAN_2 { /*Manufacturing Page 3 */ /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check Header.PageLength at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check Header.PageLength at + *runtime before using Info[]. */ -#ifndef MPI2_MAN_PAGE_3_INFO_WORDS -#define MPI2_MAN_PAGE_3_INFO_WORDS (1) -#endif typedef struct _MPI2_CONFIG_PAGE_MAN_3 { MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ MPI2_CHIP_REVISION_ID ChipId; /*0x04 */ - U32 - Info[MPI2_MAN_PAGE_3_INFO_WORDS];/*0x08 */ + U32 Info[]; /*0x08 */ } MPI2_CONFIG_PAGE_MAN_3, *PTR_MPI2_CONFIG_PAGE_MAN_3, Mpi2ManufacturingPage3_t, @@ -765,12 +757,9 @@ typedef struct _MPI2_CONFIG_PAGE_MAN_4 { /*Manufacturing Page 5 */ /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumPhys at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumPhys at runtime before using Phy[]. */ -#ifndef MPI2_MAN_PAGE_5_PHY_ENTRIES -#define MPI2_MAN_PAGE_5_PHY_ENTRIES (1) -#endif typedef struct _MPI2_MANUFACTURING5_ENTRY { U64 WWID; /*0x00 */ @@ -787,8 +776,7 @@ typedef struct _MPI2_CONFIG_PAGE_MAN_5 { U16 Reserved2; /*0x06 */ U32 Reserved3; /*0x08 */ U32 Reserved4; /*0x0C */ - MPI2_MANUFACTURING5_ENTRY - Phy[MPI2_MAN_PAGE_5_PHY_ENTRIES];/*0x08 */ + MPI2_MANUFACTURING5_ENTRY Phy[]; /*0x10 */ } MPI2_CONFIG_PAGE_MAN_5, *PTR_MPI2_CONFIG_PAGE_MAN_5, Mpi2ManufacturingPage5_t, @@ -864,12 +852,9 @@ typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO { #define MPI2_MANPAGE7_SLOT_UNKNOWN (0xFFFF) /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumPhys at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumPhys at runtime before using ConnectorInfo[]. */ -#ifndef MPI2_MANPAGE7_CONNECTOR_INFO_MAX -#define MPI2_MANPAGE7_CONNECTOR_INFO_MAX (1) -#endif typedef struct _MPI2_CONFIG_PAGE_MAN_7 { MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ @@ -880,8 +865,7 @@ typedef struct _MPI2_CONFIG_PAGE_MAN_7 { U8 NumPhys; /*0x20 */ U8 Reserved3; /*0x21 */ U16 Reserved4; /*0x22 */ - MPI2_MANPAGE7_CONNECTOR_INFO - ConnectorInfo[MPI2_MANPAGE7_CONNECTOR_INFO_MAX]; /*0x24 */ + MPI2_MANPAGE7_CONNECTOR_INFO ConnectorInfo[]; /*0x24 */ } MPI2_CONFIG_PAGE_MAN_7, *PTR_MPI2_CONFIG_PAGE_MAN_7, Mpi2ManufacturingPage7_t, @@ -990,7 +974,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 { /* *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for GPIOCount at runtime. + *36 and check the value returned for GPIOCount at runtime. */ #ifndef MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX #define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX (36) @@ -1019,12 +1003,9 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3 { /*IO Unit Page 5 */ /* - *Upper layer code (drivers, utilities, etc.) should leave this define set to - *one and check the value returned for NumDmaEngines at runtime. + *Upper layer code (drivers, utilities, etc.) should check the value returned + *for NumDmaEngines at runtime before using DmaEngineCapabilities[]. */ -#ifndef MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES -#define MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES (1) -#endif typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_5 { MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ @@ -1042,7 +1023,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_5 { U32 Reserved2; /*0x24 */ U32 Reserved3; /*0x28 */ U32 - DmaEngineCapabilities[MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES]; /*0x2C */ + DmaEngineCapabilities[]; /*0x2C */ } MPI2_CONFIG_PAGE_IO_UNIT_5, *PTR_MPI2_CONFIG_PAGE_IO_UNIT_5, Mpi2IOUnitPage5_t, *pMpi2IOUnitPage5_t; @@ -1219,12 +1200,9 @@ typedef struct _MPI2_IOUNIT8_SENSOR { #define MPI2_IOUNIT8_SENSOR_FLAGS_T0_ENABLE (0x0001) /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumSensors at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumSensors at runtime before using Sensor[]. */ -#ifndef MPI2_IOUNITPAGE8_SENSOR_ENTRIES -#define MPI2_IOUNITPAGE8_SENSOR_ENTRIES (1) -#endif typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_8 { MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ @@ -1233,8 +1211,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_8 { U8 NumSensors; /*0x0C */ U8 PollingInterval; /*0x0D */ U16 Reserved3; /*0x0E */ - MPI2_IOUNIT8_SENSOR - Sensor[MPI2_IOUNITPAGE8_SENSOR_ENTRIES];/*0x10 */ + MPI2_IOUNIT8_SENSOR Sensor[]; /*0x10 */ } MPI2_CONFIG_PAGE_IO_UNIT_8, *PTR_MPI2_CONFIG_PAGE_IO_UNIT_8, Mpi2IOUnitPage8_t, *pMpi2IOUnitPage8_t; @@ -1259,12 +1236,9 @@ typedef struct _MPI2_IOUNIT9_SENSOR { #define MPI2_IOUNIT9_SENSOR_FLAGS_TEMP_VALID (0x01) /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumSensors at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumSensors at runtime before using Sensor[]. */ -#ifndef MPI2_IOUNITPAGE9_SENSOR_ENTRIES -#define MPI2_IOUNITPAGE9_SENSOR_ENTRIES (1) -#endif typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_9 { MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ @@ -1273,8 +1247,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_9 { U8 NumSensors; /*0x0C */ U8 Reserved4; /*0x0D */ U16 Reserved3; /*0x0E */ - MPI2_IOUNIT9_SENSOR - Sensor[MPI2_IOUNITPAGE9_SENSOR_ENTRIES];/*0x10 */ + MPI2_IOUNIT9_SENSOR Sensor[]; /*0x10 */ } MPI2_CONFIG_PAGE_IO_UNIT_9, *PTR_MPI2_CONFIG_PAGE_IO_UNIT_9, Mpi2IOUnitPage9_t, *pMpi2IOUnitPage9_t; @@ -1294,12 +1267,9 @@ typedef struct _MPI2_IOUNIT10_FUNCTION { *pMpi2IOUnit10Function_t; /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumFunctions at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumFunctions at runtime before using Function[]. */ -#ifndef MPI2_IOUNITPAGE10_FUNCTION_ENTRIES -#define MPI2_IOUNITPAGE10_FUNCTION_ENTRIES (1) -#endif typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_10 { MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ @@ -1308,8 +1278,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_10 { U16 Reserved2; /*0x06 */ U32 Reserved3; /*0x08 */ U32 Reserved4; /*0x0C */ - MPI2_IOUNIT10_FUNCTION - Function[MPI2_IOUNITPAGE10_FUNCTION_ENTRIES];/*0x10 */ + MPI2_IOUNIT10_FUNCTION Function[]; /*0x10 */ } MPI2_CONFIG_PAGE_IO_UNIT_10, *PTR_MPI2_CONFIG_PAGE_IO_UNIT_10, Mpi2IOUnitPage10_t, *pMpi2IOUnitPage10_t; @@ -1764,12 +1733,9 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_3 { /*BIOS Page 4 */ /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumPhys at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumPhys at runtime before using Phy[]. */ -#ifndef MPI2_BIOS_PAGE_4_PHY_ENTRIES -#define MPI2_BIOS_PAGE_4_PHY_ENTRIES (1) -#endif typedef struct _MPI2_BIOS4_ENTRY { U64 ReassignmentWWID; /*0x00 */ @@ -1782,8 +1748,7 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_4 { U8 NumPhys; /*0x04 */ U8 Reserved1; /*0x05 */ U16 Reserved2; /*0x06 */ - MPI2_BIOS4_ENTRY - Phy[MPI2_BIOS_PAGE_4_PHY_ENTRIES]; /*0x08 */ + MPI2_BIOS4_ENTRY Phy[]; /*0x08 */ } MPI2_CONFIG_PAGE_BIOS_4, *PTR_MPI2_CONFIG_PAGE_BIOS_4, Mpi2BiosPage4_t, *pMpi2BiosPage4_t; @@ -1836,12 +1801,9 @@ typedef struct _MPI2_RAIDVOL0_SETTINGS { #define MPI2_RAIDVOL0_SETTING_ENABLE_WRITE_CACHING (0x0002) /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumPhysDisks at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumPhysDisks at runtime before using PhysDisk[]. */ -#ifndef MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX -#define MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX (1) -#endif typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_0 { MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */ @@ -1861,8 +1823,7 @@ typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_0 { U8 Reserved2; /*0x25 */ U8 Reserved3; /*0x26 */ U8 InactiveStatus; /*0x27 */ - MPI2_RAIDVOL0_PHYS_DISK - PhysDisk[MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX]; /*0x28 */ + MPI2_RAIDVOL0_PHYS_DISK PhysDisk[]; /*0x28 */ } MPI2_CONFIG_PAGE_RAID_VOL_0, *PTR_MPI2_CONFIG_PAGE_RAID_VOL_0, Mpi2RaidVolPage0_t, *pMpi2RaidVolPage0_t; @@ -2045,12 +2006,9 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_0 { /*RAID Physical Disk Page 1 */ /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumPhysDiskPaths at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumPhysDiskPaths at runtime before using PhysicalDiskPath[]. */ -#ifndef MPI2_RAID_PHYS_DISK1_PATH_MAX -#define MPI2_RAID_PHYS_DISK1_PATH_MAX (1) -#endif typedef struct _MPI2_RAIDPHYSDISK1_PATH { U16 DevHandle; /*0x00 */ @@ -2075,8 +2033,7 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 { U8 PhysDiskNum; /*0x05 */ U16 Reserved1; /*0x06 */ U32 Reserved2; /*0x08 */ - MPI2_RAIDPHYSDISK1_PATH - PhysicalDiskPath[MPI2_RAID_PHYS_DISK1_PATH_MAX];/*0x0C */ + MPI2_RAIDPHYSDISK1_PATH PhysicalDiskPath[]; /*0x0C */ } MPI2_CONFIG_PAGE_RD_PDISK_1, *PTR_MPI2_CONFIG_PAGE_RD_PDISK_1, Mpi2RaidPhysDiskPage1_t, @@ -2221,12 +2178,9 @@ typedef struct _MPI2_SAS_IO_UNIT0_PHY_DATA { *pMpi2SasIOUnit0PhyData_t; /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumPhys at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumPhys at runtime before using PhyData[]. */ -#ifndef MPI2_SAS_IOUNIT0_PHY_MAX -#define MPI2_SAS_IOUNIT0_PHY_MAX (1) -#endif typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_0 { MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ @@ -2234,8 +2188,7 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_0 { U8 NumPhys; /*0x0C */ U8 Reserved2;/*0x0D */ U16 Reserved3;/*0x0E */ - MPI2_SAS_IO_UNIT0_PHY_DATA - PhyData[MPI2_SAS_IOUNIT0_PHY_MAX]; /*0x10 */ + MPI2_SAS_IO_UNIT0_PHY_DATA PhyData[];/*0x10 */ } MPI2_CONFIG_PAGE_SASIOUNIT_0, *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_0, Mpi2SasIOUnitPage0_t, *pMpi2SasIOUnitPage0_t; @@ -2296,12 +2249,9 @@ typedef struct _MPI2_SAS_IO_UNIT1_PHY_DATA { *pMpi2SasIOUnit1PhyData_t; /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumPhys at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumPhys at runtime before using PhyData[]. */ -#ifndef MPI2_SAS_IOUNIT1_PHY_MAX -#define MPI2_SAS_IOUNIT1_PHY_MAX (1) -#endif typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1 { MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ @@ -2322,7 +2272,7 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1 { U8 IODeviceMissingDelay; /*0x13 */ MPI2_SAS_IO_UNIT1_PHY_DATA - PhyData[MPI2_SAS_IOUNIT1_PHY_MAX]; /*0x14 */ + PhyData[]; /*0x14 */ } MPI2_CONFIG_PAGE_SASIOUNIT_1, *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_1, Mpi2SasIOUnitPage1_t, *pMpi2SasIOUnitPage1_t; @@ -2502,12 +2452,9 @@ typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS { #define MPI2_SASIOUNIT5_ITE_ONE_MICROSECOND (0) /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumPhys at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumPhys at runtime before using SASPhyPowerManagementSettings[]. */ -#ifndef MPI2_SAS_IOUNIT5_PHY_MAX -#define MPI2_SAS_IOUNIT5_PHY_MAX (1) -#endif typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_5 { MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ @@ -2516,7 +2463,7 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_5 { U16 Reserved2;/*0x0A */ U32 Reserved3;/*0x0C */ MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS - SASPhyPowerManagementSettings[MPI2_SAS_IOUNIT5_PHY_MAX];/*0x10 */ + SASPhyPowerManagementSettings[]; /*0x10 */ } MPI2_CONFIG_PAGE_SASIOUNIT_5, *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_5, Mpi2SasIOUnitPage5_t, *pMpi2SasIOUnitPage5_t; @@ -2554,12 +2501,9 @@ typedef struct _MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS { #define MPI2_SASIOUNIT6_MODULATION_100_PERCENT (0x03) /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumGroups at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumGroups at runtime before using PortWidthModulationGroupStatus[]. */ -#ifndef MPI2_SAS_IOUNIT6_GROUP_MAX -#define MPI2_SAS_IOUNIT6_GROUP_MAX (1) -#endif typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_6 { MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ @@ -2569,7 +2513,7 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_6 { U8 Reserved3; /*0x11 */ U16 Reserved4; /*0x12 */ MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS - PortWidthModulationGroupStatus[MPI2_SAS_IOUNIT6_GROUP_MAX]; /*0x14 */ + PortWidthModulationGroupStatus[]; /*0x14 */ } MPI2_CONFIG_PAGE_SASIOUNIT_6, *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_6, Mpi2SasIOUnitPage6_t, *pMpi2SasIOUnitPage6_t; @@ -2597,12 +2541,9 @@ typedef struct _MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS { /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumGroups at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumGroups at runtime before using PortWidthModulationGroupSettings[]. */ -#ifndef MPI2_SAS_IOUNIT7_GROUP_MAX -#define MPI2_SAS_IOUNIT7_GROUP_MAX (1) -#endif typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_7 { MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ @@ -2615,7 +2556,7 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_7 { U8 Reserved4; /*0x15 */ U16 Reserved5; /*0x16 */ MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS - PortWidthModulationGroupSettings[MPI2_SAS_IOUNIT7_GROUP_MAX];/*0x18 */ + PortWidthModulationGroupSettings[]; /*0x18 */ } MPI2_CONFIG_PAGE_SASIOUNIT_7, *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_7, Mpi2SasIOUnitPage7_t, *pMpi2SasIOUnitPage7_t; @@ -3086,12 +3027,9 @@ typedef struct _MPI2_SASPHY2_PHY_EVENT { /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumPhyEvents at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumPhyEvents at runtime before using PhyEvent[]. */ -#ifndef MPI2_SASPHY2_PHY_EVENT_MAX -#define MPI2_SASPHY2_PHY_EVENT_MAX (1) -#endif typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_2 { MPI2_CONFIG_EXTENDED_PAGE_HEADER @@ -3105,7 +3043,7 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_2 { U16 Reserved3; /*0x0E */ MPI2_SASPHY2_PHY_EVENT - PhyEvent[MPI2_SASPHY2_PHY_EVENT_MAX]; /*0x10 */ + PhyEvent[]; /*0x10 */ } MPI2_CONFIG_PAGE_SAS_PHY_2, *PTR_MPI2_CONFIG_PAGE_SAS_PHY_2, Mpi2SasPhyPage2_t, @@ -3200,12 +3138,9 @@ typedef struct _MPI2_SASPHY3_PHY_EVENT_CONFIG { #define MPI2_SASPHY3_TFLAGS_EVENT_NOTIFY (0x0001) /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumPhyEvents at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumPhyEvents at runtime before using PhyEventConfig[]. */ -#ifndef MPI2_SASPHY3_PHY_EVENT_MAX -#define MPI2_SASPHY3_PHY_EVENT_MAX (1) -#endif typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_3 { MPI2_CONFIG_EXTENDED_PAGE_HEADER @@ -3219,7 +3154,7 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_3 { U16 Reserved3; /*0x0E */ MPI2_SASPHY3_PHY_EVENT_CONFIG - PhyEventConfig[MPI2_SASPHY3_PHY_EVENT_MAX]; /*0x10 */ + PhyEventConfig[]; /*0x10 */ } MPI2_CONFIG_PAGE_SAS_PHY_3, *PTR_MPI2_CONFIG_PAGE_SAS_PHY_3, Mpi2SasPhyPage3_t, *pMpi2SasPhyPage3_t; @@ -3358,12 +3293,9 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 { /*Log Page 0 */ /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumLogEntries at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumLogEntries at runtime before using LogEntry[]. */ -#ifndef MPI2_LOG_0_NUM_LOG_ENTRIES -#define MPI2_LOG_0_NUM_LOG_ENTRIES (1) -#endif #define MPI2_LOG_0_LOG_DATA_LENGTH (0x1C) @@ -3393,8 +3325,7 @@ typedef struct _MPI2_CONFIG_PAGE_LOG_0 { U32 Reserved2; /*0x0C */ U16 NumLogEntries;/*0x10 */ U16 Reserved3; /*0x12 */ - MPI2_LOG_0_ENTRY - LogEntry[MPI2_LOG_0_NUM_LOG_ENTRIES]; /*0x14 */ + MPI2_LOG_0_ENTRY LogEntry[]; /*0x14 */ } MPI2_CONFIG_PAGE_LOG_0, *PTR_MPI2_CONFIG_PAGE_LOG_0, Mpi2LogPage0_t, *pMpi2LogPage0_t; @@ -3408,12 +3339,9 @@ typedef struct _MPI2_CONFIG_PAGE_LOG_0 { /*RAID Page 0 */ /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumElements at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumElements at runtime before using ConfigElement[]. */ -#ifndef MPI2_RAIDCONFIG0_MAX_ELEMENTS -#define MPI2_RAIDCONFIG0_MAX_ELEMENTS (1) -#endif typedef struct _MPI2_RAIDCONFIG0_CONFIG_ELEMENT { U16 ElementFlags; /*0x00 */ @@ -3446,8 +3374,7 @@ typedef struct _MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0 { U8 NumElements; /*0x2C */ U8 Reserved2; /*0x2D */ U16 Reserved3; /*0x2E */ - MPI2_RAIDCONFIG0_CONFIG_ELEMENT - ConfigElement[MPI2_RAIDCONFIG0_MAX_ELEMENTS]; /*0x30 */ + MPI2_RAIDCONFIG0_CONFIG_ELEMENT ConfigElement[];/*0x30 */ } MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0, *PTR_MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0, Mpi2RaidConfigurationPage0_t, @@ -3687,12 +3614,9 @@ typedef struct _MPI26_PCIE_IO_UNIT0_PHY_DATA { Mpi26PCIeIOUnit0PhyData_t, *pMpi26PCIeIOUnit0PhyData_t; /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumPhys at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumPhys at runtime before using PhyData[]. */ -#ifndef MPI26_PCIE_IOUNIT0_PHY_MAX -#define MPI26_PCIE_IOUNIT0_PHY_MAX (1) -#endif typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_0 { MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ @@ -3701,7 +3625,7 @@ typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_0 { U8 InitStatus; /*0x0D */ U16 Reserved3; /*0x0E */ MPI26_PCIE_IO_UNIT0_PHY_DATA - PhyData[MPI26_PCIE_IOUNIT0_PHY_MAX]; /*0x10 */ + PhyData[]; /*0x10 */ } MPI26_CONFIG_PAGE_PIOUNIT_0, *PTR_MPI26_CONFIG_PAGE_PIOUNIT_0, Mpi26PCIeIOUnitPage0_t, *pMpi26PCIeIOUnitPage0_t; @@ -3744,12 +3668,9 @@ typedef struct _MPI26_PCIE_IO_UNIT1_PHY_DATA { #define MPI26_PCIEIOUNIT1_LINKFLAGS_SRNS_EN (0x02) /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumPhys at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumPhys at runtime before using PhyData[]. */ -#ifndef MPI26_PCIE_IOUNIT1_PHY_MAX -#define MPI26_PCIE_IOUNIT1_PHY_MAX (1) -#endif typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_1 { MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ @@ -3761,7 +3682,7 @@ typedef struct _MPI26_CONFIG_PAGE_PIOUNIT_1 { U8 DMDReportPCIe; /*0x11 */ U16 Reserved2; /*0x12 */ MPI26_PCIE_IO_UNIT1_PHY_DATA - PhyData[MPI26_PCIE_IOUNIT1_PHY_MAX];/*0x14 */ + PhyData[]; /*0x14 */ } MPI26_CONFIG_PAGE_PIOUNIT_1, *PTR_MPI26_CONFIG_PAGE_PIOUNIT_1, Mpi26PCIeIOUnitPage1_t, *pMpi26PCIeIOUnitPage1_t; @@ -3993,12 +3914,9 @@ typedef struct _MPI26_PCIELINK2_LINK_EVENT { /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumLinkEvents at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumLinkEvents at runtime before using LinkEvent[]. */ -#ifndef MPI26_PCIELINK2_LINK_EVENT_MAX -#define MPI26_PCIELINK2_LINK_EVENT_MAX (1) -#endif typedef struct _MPI26_CONFIG_PAGE_PCIELINK_2 { MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ @@ -4009,7 +3927,7 @@ typedef struct _MPI26_CONFIG_PAGE_PCIELINK_2 { U8 Reserved3; /*0x0D */ U16 Reserved4; /*0x0E */ MPI26_PCIELINK2_LINK_EVENT - LinkEvent[MPI26_PCIELINK2_LINK_EVENT_MAX]; /*0x10 */ + LinkEvent[]; /*0x10 */ } MPI26_CONFIG_PAGE_PCIELINK_2, *PTR_MPI26_CONFIG_PAGE_PCIELINK_2, Mpi26PcieLinkPage2_t, *pMpi26PcieLinkPage2_t; @@ -4067,12 +3985,9 @@ typedef struct _MPI26_PCIELINK3_LINK_EVENT_CONFIG { #define MPI26_PCIELINK3_TFLAGS_EVENT_NOTIFY (0x0001) /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check the value returned for NumLinkEvents at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check the value returned + *for NumLinkEvents at runtime before using LinkEventConfig[]. */ -#ifndef MPI26_PCIELINK3_LINK_EVENT_MAX -#define MPI26_PCIELINK3_LINK_EVENT_MAX (1) -#endif typedef struct _MPI26_CONFIG_PAGE_PCIELINK_3 { MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */ @@ -4083,7 +3998,7 @@ typedef struct _MPI26_CONFIG_PAGE_PCIELINK_3 { U8 Reserved3; /*0x0D */ U16 Reserved4; /*0x0E */ MPI26_PCIELINK3_LINK_EVENT_CONFIG - LinkEventConfig[MPI26_PCIELINK3_LINK_EVENT_MAX]; /*0x10 */ + LinkEventConfig[]; /*0x10 */ } MPI26_CONFIG_PAGE_PCIELINK_3, *PTR_MPI26_CONFIG_PAGE_PCIELINK_3, Mpi26PcieLinkPage3_t, *pMpi26PcieLinkPage3_t; diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_image.h b/drivers/scsi/mpt3sas/mpi/mpi2_image.h index 33b9c3a6fd..798ab6e33e 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_image.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_image.h @@ -295,20 +295,9 @@ typedef struct _MPI2_EXT_IMAGE_HEADER { /*FLASH Layout Extended Image Data */ /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check RegionsPerLayout at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check NumberOfLayouts and + *RegionsPerLayout at runtime before using Layout[] and Region[]. */ -#ifndef MPI2_FLASH_NUMBER_OF_REGIONS -#define MPI2_FLASH_NUMBER_OF_REGIONS (1) -#endif - -/* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check NumberOfLayouts at runtime. - */ -#ifndef MPI2_FLASH_NUMBER_OF_LAYOUTS -#define MPI2_FLASH_NUMBER_OF_LAYOUTS (1) -#endif typedef struct _MPI2_FLASH_REGION { U8 RegionType; /*0x00 */ @@ -325,7 +314,7 @@ typedef struct _MPI2_FLASH_LAYOUT { U32 Reserved1; /*0x04 */ U32 Reserved2; /*0x08 */ U32 Reserved3; /*0x0C */ - MPI2_FLASH_REGION Region[MPI2_FLASH_NUMBER_OF_REGIONS]; /*0x10 */ + MPI2_FLASH_REGION Region[]; /*0x10 */ } MPI2_FLASH_LAYOUT, *PTR_MPI2_FLASH_LAYOUT, Mpi2FlashLayout_t, *pMpi2FlashLayout_t; @@ -339,7 +328,7 @@ typedef struct _MPI2_FLASH_LAYOUT_DATA { U16 MinimumSectorAlignment; /*0x08 */ U16 Reserved3; /*0x0A */ U32 Reserved4; /*0x0C */ - MPI2_FLASH_LAYOUT Layout[MPI2_FLASH_NUMBER_OF_LAYOUTS]; /*0x10 */ + MPI2_FLASH_LAYOUT Layout[]; /*0x10 */ } MPI2_FLASH_LAYOUT_DATA, *PTR_MPI2_FLASH_LAYOUT_DATA, Mpi2FlashLayoutData_t, *pMpi2FlashLayoutData_t; @@ -373,12 +362,9 @@ typedef struct _MPI2_FLASH_LAYOUT_DATA { /*Supported Devices Extended Image Data */ /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check NumberOfDevices at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check NumberOfDevices at + *runtime before using SupportedDevice[]. */ -#ifndef MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES -#define MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES (1) -#endif typedef struct _MPI2_SUPPORTED_DEVICE { U16 DeviceID; /*0x00 */ @@ -399,7 +385,7 @@ typedef struct _MPI2_SUPPORTED_DEVICES_DATA { U8 Reserved2; /*0x03 */ U32 Reserved3; /*0x04 */ MPI2_SUPPORTED_DEVICE - SupportedDevice[MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES];/*0x08 */ + SupportedDevice[]; /*0x08 */ } MPI2_SUPPORTED_DEVICES_DATA, *PTR_MPI2_SUPPORTED_DEVICES_DATA, Mpi2SupportedDevicesData_t, *pMpi2SupportedDevicesData_t; @@ -464,7 +450,7 @@ typedef struct _MPI25_ENCRYPTED_HASH_ENTRY { U8 EncryptionAlgorithm; /*0x02 */ U8 Reserved1; /*0x03 */ U32 Reserved2; /*0x04 */ - U32 EncryptedHash[1]; /*0x08 */ /* variable length */ + U32 EncryptedHash[]; /*0x08 */ } MPI25_ENCRYPTED_HASH_ENTRY, *PTR_MPI25_ENCRYPTED_HASH_ENTRY, Mpi25EncryptedHashEntry_t, *pMpi25EncryptedHashEntry_t; @@ -508,7 +494,7 @@ typedef struct _MPI25_ENCRYPTED_HASH_DATA { U8 NumHash; /*0x01 */ U16 Reserved1; /*0x02 */ U32 Reserved2; /*0x04 */ - MPI25_ENCRYPTED_HASH_ENTRY EncryptedHashEntry[1]; /*0x08 */ + MPI25_ENCRYPTED_HASH_ENTRY EncryptedHashEntry[]; /*0x08 */ } MPI25_ENCRYPTED_HASH_DATA, *PTR_MPI25_ENCRYPTED_HASH_DATA, Mpi25EncryptedHashData_t, *pMpi25EncryptedHashData_t; diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h index 2c57115172..d928525911 100644 --- a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h +++ b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h @@ -808,12 +808,9 @@ typedef struct _MPI2_EVENT_DATA_IR_PHYSICAL_DISK { /*Integrated RAID Configuration Change List Event data */ /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check NumElements at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check NumElements at + *runtime before using ConfigElement[]. */ -#ifndef MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT -#define MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT (1) -#endif typedef struct _MPI2_EVENT_IR_CONFIG_ELEMENT { U16 ElementFlags; /*0x00 */ @@ -848,7 +845,7 @@ typedef struct _MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST { U8 ConfigNum; /*0x03 */ U32 Flags; /*0x04 */ MPI2_EVENT_IR_CONFIG_ELEMENT - ConfigElement[MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT];/*0x08 */ + ConfigElement[];/*0x08 */ } MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST, *PTR_MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST, Mpi2EventDataIrConfigChangeList_t, @@ -969,12 +966,9 @@ typedef struct _MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW { /*SAS Topology Change List Event data */ /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check NumEntries at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check NumEntries at + *runtime before using PHY[]. */ -#ifndef MPI2_EVENT_SAS_TOPO_PHY_COUNT -#define MPI2_EVENT_SAS_TOPO_PHY_COUNT (1) -#endif typedef struct _MPI2_EVENT_SAS_TOPO_PHY_ENTRY { U16 AttachedDevHandle; /*0x00 */ @@ -994,7 +988,7 @@ typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST { U8 ExpStatus; /*0x0A */ U8 PhysicalPort; /*0x0B */ MPI2_EVENT_SAS_TOPO_PHY_ENTRY - PHY[MPI2_EVENT_SAS_TOPO_PHY_COUNT]; /*0x0C */ + PHY[]; /*0x0C */ } MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, *PTR_MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, Mpi2EventDataSasTopologyChangeList_t, @@ -1229,12 +1223,9 @@ typedef struct _MPI26_EVENT_DATA_PCIE_ENUMERATION { /*PCIe Topology Change List Event data (MPI v2.6 and later) */ /* - *Host code (drivers, BIOS, utilities, etc.) should leave this define set to - *one and check NumEntries at runtime. + *Host code (drivers, BIOS, utilities, etc.) should check NumEntries at + *runtime before using PortEntry[]. */ -#ifndef MPI26_EVENT_PCIE_TOPO_PORT_COUNT -#define MPI26_EVENT_PCIE_TOPO_PORT_COUNT (1) -#endif typedef struct _MPI26_EVENT_PCIE_TOPO_PORT_ENTRY { U16 AttachedDevHandle; /*0x00 */ @@ -1286,7 +1277,7 @@ typedef struct _MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST { U8 SwitchStatus; /*0x0A */ U8 PhysicalPort; /*0x0B */ MPI26_EVENT_PCIE_TOPO_PORT_ENTRY - PortEntry[MPI26_EVENT_PCIE_TOPO_PORT_COUNT]; /*0x0C */ + PortEntry[]; /*0x0C */ } MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST, *PTR_MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST, Mpi26EventDataPCIeTopologyChangeList_t, diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index aa29e250cf..b8120ca93c 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -4893,8 +4893,7 @@ mpt3sas_base_update_missing_delay(struct MPT3SAS_ADAPTER *ioc, if (!num_phys) return; - sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (num_phys * - sizeof(Mpi2SasIOUnit1PhyData_t)); + sz = struct_size(sas_iounit_pg1, PhyData, num_phys); sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); if (!sas_iounit_pg1) { ioc_err(ioc, "failure at %s:%d/%s()!\n", @@ -5044,7 +5043,7 @@ _base_get_event_diag_triggers(struct MPT3SAS_ADAPTER *ioc) { Mpi26DriverTriggerPage2_t trigger_pg2; struct SL_WH_EVENT_TRIGGER_T *event_tg; - MPI26_DRIVER_MPI_EVENT_TIGGER_ENTRY *mpi_event_tg; + MPI26_DRIVER_MPI_EVENT_TRIGGER_ENTRY *mpi_event_tg; Mpi2ConfigReply_t mpi_reply; int r = 0, i = 0; u16 count = 0; @@ -5096,7 +5095,7 @@ _base_get_scsi_diag_triggers(struct MPT3SAS_ADAPTER *ioc) { Mpi26DriverTriggerPage3_t trigger_pg3; struct SL_WH_SCSI_TRIGGER_T *scsi_tg; - MPI26_DRIVER_SCSI_SENSE_TIGGER_ENTRY *mpi_scsi_tg; + MPI26_DRIVER_SCSI_SENSE_TRIGGER_ENTRY *mpi_scsi_tg; Mpi2ConfigReply_t mpi_reply; int r = 0, i = 0; u16 count = 0; @@ -5148,7 +5147,7 @@ _base_get_mpi_diag_triggers(struct MPT3SAS_ADAPTER *ioc) { Mpi26DriverTriggerPage4_t trigger_pg4; struct SL_WH_MPI_TRIGGER_T *status_tg; - MPI26_DRIVER_IOCSTATUS_LOGINFO_TIGGER_ENTRY *mpi_status_tg; + MPI26_DRIVER_IOCSTATUS_LOGINFO_TRIGGER_ENTRY *mpi_status_tg; Mpi2ConfigReply_t mpi_reply; int r = 0, i = 0; u16 count = 0; @@ -5379,10 +5378,9 @@ _base_update_diag_trigger_pages(struct MPT3SAS_ADAPTER *ioc) static int _base_assign_fw_reported_qd(struct MPT3SAS_ADAPTER *ioc) { Mpi2ConfigReply_t mpi_reply; - Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL; + Mpi2SasIOUnitPage1_t sas_iounit_pg1; Mpi26PCIeIOUnitPage1_t pcie_iounit_pg1; u16 depth; - int sz; int rc = 0; ioc->max_wideport_qd = MPT3SAS_SAS_QUEUE_DEPTH; @@ -5392,28 +5390,21 @@ static int _base_assign_fw_reported_qd(struct MPT3SAS_ADAPTER *ioc) if (!ioc->is_gen35_ioc) goto out; /* sas iounit page 1 */ - sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData); - sas_iounit_pg1 = kzalloc(sizeof(Mpi2SasIOUnitPage1_t), GFP_KERNEL); - if (!sas_iounit_pg1) { - pr_err("%s: failure at %s:%d/%s()!\n", - ioc->name, __FILE__, __LINE__, __func__); - return rc; - } rc = mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply, - sas_iounit_pg1, sz); + &sas_iounit_pg1, sizeof(Mpi2SasIOUnitPage1_t)); if (rc) { pr_err("%s: failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); goto out; } - depth = le16_to_cpu(sas_iounit_pg1->SASWideMaxQueueDepth); + depth = le16_to_cpu(sas_iounit_pg1.SASWideMaxQueueDepth); ioc->max_wideport_qd = (depth ? depth : MPT3SAS_SAS_QUEUE_DEPTH); - depth = le16_to_cpu(sas_iounit_pg1->SASNarrowMaxQueueDepth); + depth = le16_to_cpu(sas_iounit_pg1.SASNarrowMaxQueueDepth); ioc->max_narrowport_qd = (depth ? depth : MPT3SAS_SAS_QUEUE_DEPTH); - depth = sas_iounit_pg1->SATAMaxQDepth; + depth = sas_iounit_pg1.SATAMaxQDepth; ioc->max_sata_qd = (depth ? depth : MPT3SAS_SATA_QUEUE_DEPTH); /* pcie iounit page 1 */ @@ -5432,7 +5423,6 @@ out: "MaxWidePortQD: 0x%x MaxNarrowPortQD: 0x%x MaxSataQD: 0x%x MaxNvmeQD: 0x%x\n", ioc->max_wideport_qd, ioc->max_narrowport_qd, ioc->max_sata_qd, ioc->max_nvme_qd)); - kfree(sas_iounit_pg1); return rc; } @@ -5588,6 +5578,7 @@ out: static int _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc) { + Mpi2IOUnitPage8_t iounit_pg8; Mpi2ConfigReply_t mpi_reply; u32 iounit_pg1_flags; int tg_flags = 0; @@ -5684,7 +5675,7 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc) rc = mpt3sas_config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1); if (rc) return rc; - rc = mpt3sas_config_get_iounit_pg8(ioc, &mpi_reply, &ioc->iounit_pg8); + rc = mpt3sas_config_get_iounit_pg8(ioc, &mpi_reply, &iounit_pg8); if (rc) return rc; _base_display_ioc_capabilities(ioc); @@ -5706,8 +5697,8 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc) if (rc) return rc; - if (ioc->iounit_pg8.NumSensors) - ioc->temp_sensors_count = ioc->iounit_pg8.NumSensors; + if (iounit_pg8.NumSensors) + ioc->temp_sensors_count = iounit_pg8.NumSensors; if (ioc->is_aero_ioc) { rc = _base_update_ioc_page1_inlinewith_perf_mode(ioc); if (rc) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h index 1be0850ca1..6d0bc8c667 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.h +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h @@ -1237,7 +1237,6 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc); * @ioc_pg8: static ioc page 8 * @iounit_pg0: static iounit page 0 * @iounit_pg1: static iounit page 1 - * @iounit_pg8: static iounit page 8 * @sas_hba: sas host object * @sas_expander_list: expander object list * @enclosure_list: enclosure object list @@ -1465,7 +1464,6 @@ struct MPT3SAS_ADAPTER { Mpi2IOCPage8_t ioc_pg8; Mpi2IOUnitPage0_t iounit_pg0; Mpi2IOUnitPage1_t iounit_pg1; - Mpi2IOUnitPage8_t iounit_pg8; Mpi2IOCPage1_t ioc_pg1_copy; struct _boot_device req_boot_device; @@ -1983,6 +1981,7 @@ extern const struct attribute_group *mpt3sas_host_groups[]; extern const struct attribute_group *mpt3sas_dev_groups[]; void mpt3sas_ctl_init(ushort hbas_to_enumerate); void mpt3sas_ctl_exit(ushort hbas_to_enumerate); +void mpt3sas_ctl_release(struct MPT3SAS_ADAPTER *ioc); u8 mpt3sas_ctl_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply); void mpt3sas_ctl_pre_reset_handler(struct MPT3SAS_ADAPTER *ioc); diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c index d114ef381c..2e88f456fc 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_config.c +++ b/drivers/scsi/mpt3sas/mpt3sas_config.c @@ -2334,7 +2334,7 @@ mpt3sas_config_update_driver_trigger_pg2(struct MPT3SAS_ADAPTER *ioc, tg_pg2.NumMPIEventTrigger = 0; memset(&tg_pg2.MPIEventTriggers[0], 0, NUM_VALID_ENTRIES * sizeof( - MPI26_DRIVER_MPI_EVENT_TIGGER_ENTRY)); + MPI26_DRIVER_MPI_EVENT_TRIGGER_ENTRY)); } rc = _config_set_driver_trigger_pg2(ioc, &mpi_reply, &tg_pg2); @@ -2493,7 +2493,7 @@ mpt3sas_config_update_driver_trigger_pg3(struct MPT3SAS_ADAPTER *ioc, tg_pg3.NumSCSISenseTrigger = 0; memset(&tg_pg3.SCSISenseTriggers[0], 0, NUM_VALID_ENTRIES * sizeof( - MPI26_DRIVER_SCSI_SENSE_TIGGER_ENTRY)); + MPI26_DRIVER_SCSI_SENSE_TRIGGER_ENTRY)); } rc = _config_set_driver_trigger_pg3(ioc, &mpi_reply, &tg_pg3); @@ -2649,7 +2649,7 @@ mpt3sas_config_update_driver_trigger_pg4(struct MPT3SAS_ADAPTER *ioc, tg_pg4.NumIOCStatusLogInfoTrigger = 0; memset(&tg_pg4.IOCStatusLoginfoTriggers[0], 0, NUM_VALID_ENTRIES * sizeof( - MPI26_DRIVER_IOCSTATUS_LOGINFO_TIGGER_ENTRY)); + MPI26_DRIVER_IOCSTATUS_LOGINFO_TRIGGER_ENTRY)); } rc = _config_set_driver_trigger_pg4(ioc, &mpi_reply, &tg_pg4); diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c index efdb8178db..147cb7088d 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c @@ -4157,31 +4157,37 @@ mpt3sas_ctl_init(ushort hbas_to_enumerate) } /** - * mpt3sas_ctl_exit - exit point for ctl - * @hbas_to_enumerate: ? + * mpt3sas_ctl_release - release dma for ctl + * @ioc: per adapter object */ void -mpt3sas_ctl_exit(ushort hbas_to_enumerate) +mpt3sas_ctl_release(struct MPT3SAS_ADAPTER *ioc) { - struct MPT3SAS_ADAPTER *ioc; int i; - list_for_each_entry(ioc, &mpt3sas_ioc_list, list) { + /* free memory associated to diag buffers */ + for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) { + if (!ioc->diag_buffer[i]) + continue; + dma_free_coherent(&ioc->pdev->dev, + ioc->diag_buffer_sz[i], + ioc->diag_buffer[i], + ioc->diag_buffer_dma[i]); + ioc->diag_buffer[i] = NULL; + ioc->diag_buffer_status[i] = 0; + } - /* free memory associated to diag buffers */ - for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) { - if (!ioc->diag_buffer[i]) - continue; - dma_free_coherent(&ioc->pdev->dev, - ioc->diag_buffer_sz[i], - ioc->diag_buffer[i], - ioc->diag_buffer_dma[i]); - ioc->diag_buffer[i] = NULL; - ioc->diag_buffer_status[i] = 0; - } + kfree(ioc->event_log); +} + +/** + * mpt3sas_ctl_exit - exit point for ctl + * @hbas_to_enumerate: ? + */ +void +mpt3sas_ctl_exit(ushort hbas_to_enumerate) +{ - kfree(ioc->event_log); - } if (hbas_to_enumerate != 1) misc_deregister(&ctl_dev); if (hbas_to_enumerate != 2) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 605013d3ee..51b5788da0 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -2431,8 +2431,7 @@ _scsih_get_volume_capabilities(struct MPT3SAS_ADAPTER *ioc, } raid_device->num_pds = num_pds; - sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds * - sizeof(Mpi2RaidVol0PhysDisk_t)); + sz = struct_size(vol_pg0, PhysDisk, num_pds); vol_pg0 = kzalloc(sz, GFP_KERNEL); if (!vol_pg0) { dfailprintk(ioc, @@ -5966,8 +5965,7 @@ _scsih_update_vphys_after_reset(struct MPT3SAS_ADAPTER *ioc) /* * Read SASIOUnitPage0 to get each HBA Phy's data. */ - sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + - (ioc->sas_hba.num_phys * sizeof(Mpi2SasIOUnit0PhyData_t)); + sz = struct_size(sas_iounit_pg0, PhyData, ioc->sas_hba.num_phys); sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL); if (!sas_iounit_pg0) { ioc_err(ioc, "failure at %s:%d/%s()!\n", @@ -6145,8 +6143,7 @@ _scsih_get_port_table_after_reset(struct MPT3SAS_ADAPTER *ioc, u64 attached_sas_addr; u8 found = 0, port_count = 0, port_id; - sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys - * sizeof(Mpi2SasIOUnit0PhyData_t)); + sz = struct_size(sas_iounit_pg0, PhyData, ioc->sas_hba.num_phys); sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL); if (!sas_iounit_pg0) { ioc_err(ioc, "failure at %s:%d/%s()!\n", @@ -6579,8 +6576,7 @@ _scsih_sas_host_refresh(struct MPT3SAS_ADAPTER *ioc) ioc_info(ioc, "updating handles for sas_host(0x%016llx)\n", (u64)ioc->sas_hba.sas_address)); - sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys - * sizeof(Mpi2SasIOUnit0PhyData_t)); + sz = struct_size(sas_iounit_pg0, PhyData, ioc->sas_hba.num_phys); sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL); if (!sas_iounit_pg0) { ioc_err(ioc, "failure at %s:%d/%s()!\n", @@ -6731,8 +6727,7 @@ _scsih_sas_host_add(struct MPT3SAS_ADAPTER *ioc) ioc->sas_hba.num_phys = num_phys; /* sas_iounit page 0 */ - sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys * - sizeof(Mpi2SasIOUnit0PhyData_t)); + sz = struct_size(sas_iounit_pg0, PhyData, ioc->sas_hba.num_phys); sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL); if (!sas_iounit_pg0) { ioc_err(ioc, "failure at %s:%d/%s()!\n", @@ -6754,8 +6749,7 @@ _scsih_sas_host_add(struct MPT3SAS_ADAPTER *ioc) } /* sas_iounit page 1 */ - sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys * - sizeof(Mpi2SasIOUnit1PhyData_t)); + sz = struct_size(sas_iounit_pg1, PhyData, ioc->sas_hba.num_phys); sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); if (!sas_iounit_pg1) { ioc_err(ioc, "failure at %s:%d/%s()!\n", @@ -10376,8 +10370,8 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc) Mpi2ExpanderPage0_t expander_pg0; Mpi2SasDevicePage0_t sas_device_pg0; Mpi26PCIeDevicePage0_t pcie_device_pg0; - Mpi2RaidVolPage1_t *volume_pg1; - Mpi2RaidVolPage0_t *volume_pg0; + Mpi2RaidVolPage1_t volume_pg1; + Mpi2RaidVolPage0_t volume_pg0; Mpi2RaidPhysDiskPage0_t pd_pg0; Mpi2EventIrConfigElement_t element; Mpi2ConfigReply_t mpi_reply; @@ -10392,16 +10386,6 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc) u8 retry_count; unsigned long flags; - volume_pg0 = kzalloc(sizeof(*volume_pg0), GFP_KERNEL); - if (!volume_pg0) - return; - - volume_pg1 = kzalloc(sizeof(*volume_pg1), GFP_KERNEL); - if (!volume_pg1) { - kfree(volume_pg0); - return; - } - ioc_info(ioc, "scan devices: start\n"); _scsih_sas_host_refresh(ioc); @@ -10511,7 +10495,7 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc) /* volumes */ handle = 0xFFFF; while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply, - volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) { + &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) { ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { @@ -10519,15 +10503,15 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc) ioc_status, le32_to_cpu(mpi_reply.IOCLogInfo)); break; } - handle = le16_to_cpu(volume_pg1->DevHandle); + handle = le16_to_cpu(volume_pg1.DevHandle); spin_lock_irqsave(&ioc->raid_device_lock, flags); raid_device = _scsih_raid_device_find_by_wwid(ioc, - le64_to_cpu(volume_pg1->WWID)); + le64_to_cpu(volume_pg1.WWID)); spin_unlock_irqrestore(&ioc->raid_device_lock, flags); if (raid_device) continue; if (mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply, - volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle, + &volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle, sizeof(Mpi2RaidVolPage0_t))) continue; ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & @@ -10537,17 +10521,17 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc) ioc_status, le32_to_cpu(mpi_reply.IOCLogInfo)); break; } - if (volume_pg0->VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL || - volume_pg0->VolumeState == MPI2_RAID_VOL_STATE_ONLINE || - volume_pg0->VolumeState == MPI2_RAID_VOL_STATE_DEGRADED) { + if (volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL || + volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_ONLINE || + volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_DEGRADED) { memset(&element, 0, sizeof(Mpi2EventIrConfigElement_t)); element.ReasonCode = MPI2_EVENT_IR_CHANGE_RC_ADDED; - element.VolDevHandle = volume_pg1->DevHandle; + element.VolDevHandle = volume_pg1.DevHandle; ioc_info(ioc, "\tBEFORE adding volume: handle (0x%04x)\n", - volume_pg1->DevHandle); + volume_pg1.DevHandle); _scsih_sas_volume_add(ioc, &element); ioc_info(ioc, "\tAFTER adding volume: handle (0x%04x)\n", - volume_pg1->DevHandle); + volume_pg1.DevHandle); } } @@ -10636,9 +10620,6 @@ _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc) handle, (u64)le64_to_cpu(pcie_device_pg0.WWID)); } - kfree(volume_pg0); - kfree(volume_pg1); - ioc_info(ioc, "\tpcie devices: pcie end devices complete\n"); ioc_info(ioc, "scan devices: complete\n"); } @@ -11350,6 +11331,7 @@ static void scsih_remove(struct pci_dev *pdev) } mpt3sas_base_detach(ioc); + mpt3sas_ctl_release(ioc); spin_lock(&gioc_lock); list_del(&ioc->list); spin_unlock(&gioc_lock); diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c index e8a4750f6e..421ea511b6 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_transport.c +++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c @@ -1792,8 +1792,7 @@ _transport_phy_enable(struct sas_phy *phy, int enable) /* handle hba phys */ /* read sas_iounit page 0 */ - sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys * - sizeof(Mpi2SasIOUnit0PhyData_t)); + sz = struct_size(sas_iounit_pg0, PhyData, ioc->sas_hba.num_phys); sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL); if (!sas_iounit_pg0) { ioc_err(ioc, "failure at %s:%d/%s()!\n", @@ -1833,8 +1832,7 @@ _transport_phy_enable(struct sas_phy *phy, int enable) } /* read sas_iounit page 1 */ - sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys * - sizeof(Mpi2SasIOUnit1PhyData_t)); + sz = struct_size(sas_iounit_pg1, PhyData, ioc->sas_hba.num_phys); sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); if (!sas_iounit_pg1) { ioc_err(ioc, "failure at %s:%d/%s()!\n", @@ -1944,8 +1942,7 @@ _transport_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates) /* handle hba phys */ /* sas_iounit page 1 */ - sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys * - sizeof(Mpi2SasIOUnit1PhyData_t)); + sz = struct_size(sas_iounit_pg1, PhyData, ioc->sas_hba.num_phys); sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); if (!sas_iounit_pg1) { ioc_err(ioc, "failure at %s:%d/%s()!\n", diff --git a/drivers/scsi/mpt3sas/mpt3sas_trigger_pages.h b/drivers/scsi/mpt3sas/mpt3sas_trigger_pages.h index 5f3328f011..edb8fe7090 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_trigger_pages.h +++ b/drivers/scsi/mpt3sas/mpt3sas_trigger_pages.h @@ -20,12 +20,12 @@ #define MPI2_CONFIG_EXTPAGETYPE_DRIVER_PERSISTENT_TRIGGER (0xE0) #define MPI26_DRIVER_TRIGGER_PAGE0_PAGEVERSION (0x01) -typedef struct _MPI26_CONFIG_PAGE_DRIVER_TIGGER_0 { +typedef struct _MPI26_CONFIG_PAGE_DRIVER_TRIGGER_0 { MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ U16 TriggerFlags; /* 0x08 */ U16 Reserved0xA; /* 0x0A */ U32 Reserved0xC[61]; /* 0x0C */ -} _MPI26_CONFIG_PAGE_DRIVER_TIGGER_0, Mpi26DriverTriggerPage0_t; +} _MPI26_CONFIG_PAGE_DRIVER_TRIGGER_0, Mpi26DriverTriggerPage0_t; /* Trigger Flags */ #define MPI26_DRIVER_TRIGGER0_FLAG_MASTER_TRIGGER_VALID (0x0001) @@ -34,61 +34,61 @@ typedef struct _MPI26_CONFIG_PAGE_DRIVER_TIGGER_0 { #define MPI26_DRIVER_TRIGGER0_FLAG_LOGINFO_TRIGGER_VALID (0x0008) #define MPI26_DRIVER_TRIGGER_PAGE1_PAGEVERSION (0x01) -typedef struct _MPI26_DRIVER_MASTER_TIGGER_ENTRY { +typedef struct _MPI26_DRIVER_MASTER_TRIGGER_ENTRY { U32 MasterTriggerFlags; -} MPI26_DRIVER_MASTER_TIGGER_ENTRY; +} MPI26_DRIVER_MASTER_TRIGGER_ENTRY; #define MPI26_MAX_MASTER_TRIGGERS (1) -typedef struct _MPI26_CONFIG_PAGE_DRIVER_TIGGER_1 { +typedef struct _MPI26_CONFIG_PAGE_DRIVER_TRIGGER_1 { MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ U16 NumMasterTrigger; /* 0x08 */ U16 Reserved0xA; /* 0x0A */ - MPI26_DRIVER_MASTER_TIGGER_ENTRY MasterTriggers[MPI26_MAX_MASTER_TRIGGERS]; /* 0x0C */ -} MPI26_CONFIG_PAGE_DRIVER_TIGGER_1, Mpi26DriverTriggerPage1_t; + MPI26_DRIVER_MASTER_TRIGGER_ENTRY MasterTriggers[MPI26_MAX_MASTER_TRIGGERS]; /* 0x0C */ +} MPI26_CONFIG_PAGE_DRIVER_TRIGGER_1, Mpi26DriverTriggerPage1_t; #define MPI26_DRIVER_TRIGGER_PAGE2_PAGEVERSION (0x01) -typedef struct _MPI26_DRIVER_MPI_EVENT_TIGGER_ENTRY { +typedef struct _MPI26_DRIVER_MPI_EVENT_TRIGGER_ENTRY { U16 MPIEventCode; /* 0x00 */ U16 MPIEventCodeSpecific; /* 0x02 */ -} MPI26_DRIVER_MPI_EVENT_TIGGER_ENTRY; +} MPI26_DRIVER_MPI_EVENT_TRIGGER_ENTRY; #define MPI26_MAX_MPI_EVENT_TRIGGERS (20) -typedef struct _MPI26_CONFIG_PAGE_DRIVER_TIGGER_2 { +typedef struct _MPI26_CONFIG_PAGE_DRIVER_TRIGGER_2 { MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ U16 NumMPIEventTrigger; /* 0x08 */ U16 Reserved0xA; /* 0x0A */ - MPI26_DRIVER_MPI_EVENT_TIGGER_ENTRY MPIEventTriggers[MPI26_MAX_MPI_EVENT_TRIGGERS]; /* 0x0C */ -} MPI26_CONFIG_PAGE_DRIVER_TIGGER_2, Mpi26DriverTriggerPage2_t; + MPI26_DRIVER_MPI_EVENT_TRIGGER_ENTRY MPIEventTriggers[MPI26_MAX_MPI_EVENT_TRIGGERS]; /* 0x0C */ +} MPI26_CONFIG_PAGE_DRIVER_TRIGGER_2, Mpi26DriverTriggerPage2_t; #define MPI26_DRIVER_TRIGGER_PAGE3_PAGEVERSION (0x01) -typedef struct _MPI26_DRIVER_SCSI_SENSE_TIGGER_ENTRY { +typedef struct _MPI26_DRIVER_SCSI_SENSE_TRIGGER_ENTRY { U8 ASCQ; /* 0x00 */ U8 ASC; /* 0x01 */ U8 SenseKey; /* 0x02 */ U8 Reserved; /* 0x03 */ -} MPI26_DRIVER_SCSI_SENSE_TIGGER_ENTRY; +} MPI26_DRIVER_SCSI_SENSE_TRIGGER_ENTRY; #define MPI26_MAX_SCSI_SENSE_TRIGGERS (20) -typedef struct _MPI26_CONFIG_PAGE_DRIVER_TIGGER_3 { +typedef struct _MPI26_CONFIG_PAGE_DRIVER_TRIGGER_3 { MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ U16 NumSCSISenseTrigger; /* 0x08 */ U16 Reserved0xA; /* 0x0A */ - MPI26_DRIVER_SCSI_SENSE_TIGGER_ENTRY SCSISenseTriggers[MPI26_MAX_SCSI_SENSE_TRIGGERS]; /* 0x0C */ -} MPI26_CONFIG_PAGE_DRIVER_TIGGER_3, Mpi26DriverTriggerPage3_t; + MPI26_DRIVER_SCSI_SENSE_TRIGGER_ENTRY SCSISenseTriggers[MPI26_MAX_SCSI_SENSE_TRIGGERS]; /* 0x0C */ +} MPI26_CONFIG_PAGE_DRIVER_TRIGGER_3, Mpi26DriverTriggerPage3_t; #define MPI26_DRIVER_TRIGGER_PAGE4_PAGEVERSION (0x01) -typedef struct _MPI26_DRIVER_IOCSTATUS_LOGINFO_TIGGER_ENTRY { +typedef struct _MPI26_DRIVER_IOCSTATUS_LOGINFO_TRIGGER_ENTRY { U16 IOCStatus; /* 0x00 */ U16 Reserved; /* 0x02 */ U32 LogInfo; /* 0x04 */ -} MPI26_DRIVER_IOCSTATUS_LOGINFO_TIGGER_ENTRY; +} MPI26_DRIVER_IOCSTATUS_LOGINFO_TRIGGER_ENTRY; #define MPI26_MAX_LOGINFO_TRIGGERS (20) -typedef struct _MPI26_CONFIG_PAGE_DRIVER_TIGGER_4 { +typedef struct _MPI26_CONFIG_PAGE_DRIVER_TRIGGER_4 { MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ U16 NumIOCStatusLogInfoTrigger; /* 0x08 */ U16 Reserved0xA; /* 0x0A */ - MPI26_DRIVER_IOCSTATUS_LOGINFO_TIGGER_ENTRY IOCStatusLoginfoTriggers[MPI26_MAX_LOGINFO_TRIGGERS]; /* 0x0C */ -} MPI26_CONFIG_PAGE_DRIVER_TIGGER_4, Mpi26DriverTriggerPage4_t; + MPI26_DRIVER_IOCSTATUS_LOGINFO_TRIGGER_ENTRY IOCStatusLoginfoTriggers[MPI26_MAX_LOGINFO_TRIGGERS]; /* 0x0C */ +} MPI26_CONFIG_PAGE_DRIVER_TRIGGER_4, Mpi26DriverTriggerPage4_t; #endif diff --git a/drivers/scsi/mpt3sas/mpt3sas_warpdrive.c b/drivers/scsi/mpt3sas/mpt3sas_warpdrive.c index cc07ba41f5..1d64e5056a 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_warpdrive.c +++ b/drivers/scsi/mpt3sas/mpt3sas_warpdrive.c @@ -141,8 +141,7 @@ mpt3sas_init_warpdrive_properties(struct MPT3SAS_ADAPTER *ioc, return; } - sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds * - sizeof(Mpi2RaidVol0PhysDisk_t)); + sz = struct_size(vol_pg0, PhysDisk, num_pds); vol_pg0 = kzalloc(sz, GFP_KERNEL); if (!vol_pg0) { ioc_info(ioc, "WarpDrive : Direct IO is disabled Memory allocation failure for RVPG0\n"); |