diff options
Diffstat (limited to 'drivers/scsi/pm8001/pm8001_sas.c')
| -rw-r--r-- | drivers/scsi/pm8001/pm8001_sas.c | 1195 |
1 files changed, 1195 insertions, 0 deletions
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c new file mode 100644 index 000000000..a5a31dfa4 --- /dev/null +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -0,0 +1,1195 @@ +/* + * PMC-Sierra PM8001/8081/8088/8089 SAS/SATA based host adapters driver + * + * Copyright (c) 2008-2009 USI Co., Ltd. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + * + */ + +#include <linux/slab.h> +#include "pm8001_sas.h" +#include "pm80xx_tracepoints.h" + +/** + * pm8001_find_tag - from sas task to find out tag that belongs to this task + * @task: the task sent to the LLDD + * @tag: the found tag associated with the task + */ +static int pm8001_find_tag(struct sas_task *task, u32 *tag) +{ + if (task->lldd_task) { + struct pm8001_ccb_info *ccb; + ccb = task->lldd_task; + *tag = ccb->ccb_tag; + return 1; + } + return 0; +} + +/** + * pm8001_tag_free - free the no more needed tag + * @pm8001_ha: our hba struct + * @tag: the found tag associated with the task + */ +void pm8001_tag_free(struct pm8001_hba_info *pm8001_ha, u32 tag) +{ + void *bitmap = pm8001_ha->rsvd_tags; + unsigned long flags; + + if (tag >= PM8001_RESERVE_SLOT) + return; + + spin_lock_irqsave(&pm8001_ha->bitmap_lock, flags); + __clear_bit(tag, bitmap); + spin_unlock_irqrestore(&pm8001_ha->bitmap_lock, flags); +} + +/** + * pm8001_tag_alloc - allocate a empty tag for task used. + * @pm8001_ha: our hba struct + * @tag_out: the found empty tag . + */ +int pm8001_tag_alloc(struct pm8001_hba_info *pm8001_ha, u32 *tag_out) +{ + void *bitmap = pm8001_ha->rsvd_tags; + unsigned long flags; + unsigned int tag; + + spin_lock_irqsave(&pm8001_ha->bitmap_lock, flags); + tag = find_first_zero_bit(bitmap, PM8001_RESERVE_SLOT); + if (tag >= PM8001_RESERVE_SLOT) { + spin_unlock_irqrestore(&pm8001_ha->bitmap_lock, flags); + return -SAS_QUEUE_FULL; + } + __set_bit(tag, bitmap); + spin_unlock_irqrestore(&pm8001_ha->bitmap_lock, flags); + + /* reserved tags are in the lower region of the tagset */ + *tag_out = tag; + return 0; +} + +/** + * pm8001_mem_alloc - allocate memory for pm8001. + * @pdev: pci device. + * @virt_addr: the allocated virtual address + * @pphys_addr: DMA address for this device + * @pphys_addr_hi: the physical address high byte address. + * @pphys_addr_lo: the physical address low byte address. + * @mem_size: memory size. + * @align: requested byte alignment + */ +int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr, + dma_addr_t *pphys_addr, u32 *pphys_addr_hi, + u32 *pphys_addr_lo, u32 mem_size, u32 align) +{ + caddr_t mem_virt_alloc; + dma_addr_t mem_dma_handle; + u64 phys_align; + u64 align_offset = 0; + if (align) + align_offset = (dma_addr_t)align - 1; + mem_virt_alloc = dma_alloc_coherent(&pdev->dev, mem_size + align, + &mem_dma_handle, GFP_KERNEL); + if (!mem_virt_alloc) + return -ENOMEM; + *pphys_addr = mem_dma_handle; + phys_align = (*pphys_addr + align_offset) & ~align_offset; + *virt_addr = (void *)mem_virt_alloc + phys_align - *pphys_addr; + *pphys_addr_hi = upper_32_bits(phys_align); + *pphys_addr_lo = lower_32_bits(phys_align); + return 0; +} + +/** + * pm8001_find_ha_by_dev - from domain device which come from sas layer to + * find out our hba struct. + * @dev: the domain device which from sas layer. + */ +static +struct pm8001_hba_info *pm8001_find_ha_by_dev(struct domain_device *dev) +{ + struct sas_ha_struct *sha = dev->port->ha; + struct pm8001_hba_info *pm8001_ha = sha->lldd_ha; + return pm8001_ha; +} + +/** + * pm8001_phy_control - this function should be registered to + * sas_domain_function_template to provide libsas used, note: this is just + * control the HBA phy rather than other expander phy if you want control + * other phy, you should use SMP command. + * @sas_phy: which phy in HBA phys. + * @func: the operation. + * @funcdata: always NULL. + */ +int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func, + void *funcdata) +{ + int rc = 0, phy_id = sas_phy->id; + struct pm8001_hba_info *pm8001_ha = NULL; + struct sas_phy_linkrates *rates; + struct pm8001_phy *phy; + DECLARE_COMPLETION_ONSTACK(completion); + unsigned long flags; + pm8001_ha = sas_phy->ha->lldd_ha; + phy = &pm8001_ha->phy[phy_id]; + pm8001_ha->phy[phy_id].enable_completion = &completion; + + if (PM8001_CHIP_DISP->fatal_errors(pm8001_ha)) { + /* + * If the controller is in fatal error state, + * we will not get a response from the controller + */ + pm8001_dbg(pm8001_ha, FAIL, + "Phy control failed due to fatal errors\n"); + return -EFAULT; + } + + switch (func) { + case PHY_FUNC_SET_LINK_RATE: + rates = funcdata; + if (rates->minimum_linkrate) { + pm8001_ha->phy[phy_id].minimum_linkrate = + rates->minimum_linkrate; + } + if (rates->maximum_linkrate) { + pm8001_ha->phy[phy_id].maximum_linkrate = + rates->maximum_linkrate; + } + if (pm8001_ha->phy[phy_id].phy_state == PHY_LINK_DISABLE) { + PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id); + wait_for_completion(&completion); + } + PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id, + PHY_LINK_RESET); + break; + case PHY_FUNC_HARD_RESET: + if (pm8001_ha->phy[phy_id].phy_state == PHY_LINK_DISABLE) { + PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id); + wait_for_completion(&completion); + } + PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id, + PHY_HARD_RESET); + break; + case PHY_FUNC_LINK_RESET: + if (pm8001_ha->phy[phy_id].phy_state == PHY_LINK_DISABLE) { + PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id); + wait_for_completion(&completion); + } + PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id, + PHY_LINK_RESET); + break; + case PHY_FUNC_RELEASE_SPINUP_HOLD: + PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id, + PHY_LINK_RESET); + break; + case PHY_FUNC_DISABLE: + if (pm8001_ha->chip_id != chip_8001) { + if (pm8001_ha->phy[phy_id].phy_state == + PHY_STATE_LINK_UP_SPCV) { + sas_phy_disconnected(&phy->sas_phy); + sas_notify_phy_event(&phy->sas_phy, + PHYE_LOSS_OF_SIGNAL, GFP_KERNEL); + phy->phy_attached = 0; + } + } else { + if (pm8001_ha->phy[phy_id].phy_state == + PHY_STATE_LINK_UP_SPC) { + sas_phy_disconnected(&phy->sas_phy); + sas_notify_phy_event(&phy->sas_phy, + PHYE_LOSS_OF_SIGNAL, GFP_KERNEL); + phy->phy_attached = 0; + } + } + PM8001_CHIP_DISP->phy_stop_req(pm8001_ha, phy_id); + break; + case PHY_FUNC_GET_EVENTS: + spin_lock_irqsave(&pm8001_ha->lock, flags); + if (pm8001_ha->chip_id == chip_8001) { + if (-1 == pm8001_bar4_shift(pm8001_ha, + (phy_id < 4) ? 0x30000 : 0x40000)) { + spin_unlock_irqrestore(&pm8001_ha->lock, flags); + return -EINVAL; + } + } + { + struct sas_phy *phy = sas_phy->phy; + u32 __iomem *qp = pm8001_ha->io_mem[2].memvirtaddr + + 0x1034 + (0x4000 * (phy_id & 3)); + + phy->invalid_dword_count = readl(qp); + phy->running_disparity_error_count = readl(&qp[1]); + phy->loss_of_dword_sync_count = readl(&qp[3]); + phy->phy_reset_problem_count = readl(&qp[4]); + } + if (pm8001_ha->chip_id == chip_8001) + pm8001_bar4_shift(pm8001_ha, 0); + spin_unlock_irqrestore(&pm8001_ha->lock, flags); + return 0; + default: + pm8001_dbg(pm8001_ha, DEVIO, "func 0x%x\n", func); + rc = -EOPNOTSUPP; + } + msleep(300); + return rc; +} + +/** + * pm8001_scan_start - we should enable all HBA phys by sending the phy_start + * command to HBA. + * @shost: the scsi host data. + */ +void pm8001_scan_start(struct Scsi_Host *shost) +{ + int i; + struct pm8001_hba_info *pm8001_ha; + struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost); + DECLARE_COMPLETION_ONSTACK(completion); + pm8001_ha = sha->lldd_ha; + /* SAS_RE_INITIALIZATION not available in SPCv/ve */ + if (pm8001_ha->chip_id == chip_8001) + PM8001_CHIP_DISP->sas_re_init_req(pm8001_ha); + for (i = 0; i < pm8001_ha->chip->n_phy; ++i) { + pm8001_ha->phy[i].enable_completion = &completion; + PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i); + wait_for_completion(&completion); + msleep(300); + } +} + +int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time) +{ + struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost); + + /* give the phy enabling interrupt event time to come in (1s + * is empirically about all it takes) */ + if (time < HZ) + return 0; + /* Wait for discovery to finish */ + sas_drain_work(ha); + return 1; +} + +/** + * pm8001_task_prep_smp - the dispatcher function, prepare data for smp task + * @pm8001_ha: our hba card information + * @ccb: the ccb which attached to smp task + */ +static int pm8001_task_prep_smp(struct pm8001_hba_info *pm8001_ha, + struct pm8001_ccb_info *ccb) +{ + return PM8001_CHIP_DISP->smp_req(pm8001_ha, ccb); +} + +u32 pm8001_get_ncq_tag(struct sas_task *task, u32 *tag) +{ + struct ata_queued_cmd *qc = task->uldd_task; + + if (qc && ata_is_ncq(qc->tf.protocol)) { + *tag = qc->tag; + return 1; + } + + return 0; +} + +/** + * pm8001_task_prep_ata - the dispatcher function, prepare data for sata task + * @pm8001_ha: our hba card information + * @ccb: the ccb which attached to sata task + */ +static int pm8001_task_prep_ata(struct pm8001_hba_info *pm8001_ha, + struct pm8001_ccb_info *ccb) +{ + return PM8001_CHIP_DISP->sata_req(pm8001_ha, ccb); +} + +/** + * pm8001_task_prep_internal_abort - the dispatcher function, prepare data + * for internal abort task + * @pm8001_ha: our hba card information + * @ccb: the ccb which attached to sata task + */ +static int pm8001_task_prep_internal_abort(struct pm8001_hba_info *pm8001_ha, + struct pm8001_ccb_info *ccb) +{ + return PM8001_CHIP_DISP->task_abort(pm8001_ha, ccb); +} + +/** + * pm8001_task_prep_ssp_tm - the dispatcher function, prepare task management data + * @pm8001_ha: our hba card information + * @ccb: the ccb which attached to TM + * @tmf: the task management IU + */ +static int pm8001_task_prep_ssp_tm(struct pm8001_hba_info *pm8001_ha, + struct pm8001_ccb_info *ccb, struct sas_tmf_task *tmf) +{ + return PM8001_CHIP_DISP->ssp_tm_req(pm8001_ha, ccb, tmf); +} + +/** + * pm8001_task_prep_ssp - the dispatcher function, prepare ssp data for ssp task + * @pm8001_ha: our hba card information + * @ccb: the ccb which attached to ssp task + */ +static int pm8001_task_prep_ssp(struct pm8001_hba_info *pm8001_ha, + struct pm8001_ccb_info *ccb) +{ + return PM8001_CHIP_DISP->ssp_io_req(pm8001_ha, ccb); +} + + /* Find the local port id that's attached to this device */ +static int sas_find_local_port_id(struct domain_device *dev) +{ + struct domain_device *pdev = dev->parent; + + /* Directly attached device */ + if (!pdev) + return dev->port->id; + while (pdev) { + struct domain_device *pdev_p = pdev->parent; + if (!pdev_p) + return pdev->port->id; + pdev = pdev->parent; + } + return 0; +} + +#define DEV_IS_GONE(pm8001_dev) \ + ((!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED))) + + +static int pm8001_deliver_command(struct pm8001_hba_info *pm8001_ha, + struct pm8001_ccb_info *ccb) +{ + struct sas_task *task = ccb->task; + enum sas_protocol task_proto = task->task_proto; + struct sas_tmf_task *tmf = task->tmf; + int is_tmf = !!tmf; + + switch (task_proto) { + case SAS_PROTOCOL_SMP: + return pm8001_task_prep_smp(pm8001_ha, ccb); + case SAS_PROTOCOL_SSP: + if (is_tmf) + return pm8001_task_prep_ssp_tm(pm8001_ha, ccb, tmf); + return pm8001_task_prep_ssp(pm8001_ha, ccb); + case SAS_PROTOCOL_SATA: + case SAS_PROTOCOL_STP: + return pm8001_task_prep_ata(pm8001_ha, ccb); + case SAS_PROTOCOL_INTERNAL_ABORT: + return pm8001_task_prep_internal_abort(pm8001_ha, ccb); + default: + dev_err(pm8001_ha->dev, "unknown sas_task proto: 0x%x\n", + task_proto); + } + + return -EINVAL; +} + +/** + * pm8001_queue_command - register for upper layer used, all IO commands sent + * to HBA are from this interface. + * @task: the task to be execute. + * @gfp_flags: gfp_flags + */ +int pm8001_queue_command(struct sas_task *task, gfp_t gfp_flags) +{ + struct task_status_struct *ts = &task->task_status; + enum sas_protocol task_proto = task->task_proto; + struct domain_device *dev = task->dev; + struct pm8001_device *pm8001_dev = dev->lldd_dev; + bool internal_abort = sas_is_internal_abort(task); + struct pm8001_hba_info *pm8001_ha; + struct pm8001_port *port = NULL; + struct pm8001_ccb_info *ccb; + unsigned long flags; + u32 n_elem = 0; + int rc = 0; + + if (!internal_abort && !dev->port) { + ts->resp = SAS_TASK_UNDELIVERED; + ts->stat = SAS_PHY_DOWN; + if (dev->dev_type != SAS_SATA_DEV) + task->task_done(task); + return 0; + } + + pm8001_ha = pm8001_find_ha_by_dev(dev); + if (pm8001_ha->controller_fatal_error) { + ts->resp = SAS_TASK_UNDELIVERED; + task->task_done(task); + return 0; + } + + pm8001_dbg(pm8001_ha, IO, "pm8001_task_exec device\n"); + + spin_lock_irqsave(&pm8001_ha->lock, flags); + + pm8001_dev = dev->lldd_dev; + port = &pm8001_ha->port[sas_find_local_port_id(dev)]; + + if (!internal_abort && + (DEV_IS_GONE(pm8001_dev) || !port->port_attached)) { + ts->resp = SAS_TASK_UNDELIVERED; + ts->stat = SAS_PHY_DOWN; + if (sas_protocol_ata(task_proto)) { + spin_unlock_irqrestore(&pm8001_ha->lock, flags); + task->task_done(task); + spin_lock_irqsave(&pm8001_ha->lock, flags); + } else { + task->task_done(task); + } + rc = -ENODEV; + goto err_out; + } + + ccb = pm8001_ccb_alloc(pm8001_ha, pm8001_dev, task); + if (!ccb) { + rc = -SAS_QUEUE_FULL; + goto err_out; + } + + if (!sas_protocol_ata(task_proto)) { + if (task->num_scatter) { + n_elem = dma_map_sg(pm8001_ha->dev, task->scatter, + task->num_scatter, task->data_dir); + if (!n_elem) { + rc = -ENOMEM; + goto err_out_ccb; + } + } + } else { + n_elem = task->num_scatter; + } + + task->lldd_task = ccb; + ccb->n_elem = n_elem; + + atomic_inc(&pm8001_dev->running_req); + + rc = pm8001_deliver_command(pm8001_ha, ccb); + if (rc) { + atomic_dec(&pm8001_dev->running_req); + if (!sas_protocol_ata(task_proto) && n_elem) + dma_unmap_sg(pm8001_ha->dev, task->scatter, + task->num_scatter, task->data_dir); +err_out_ccb: + pm8001_ccb_free(pm8001_ha, ccb); + +err_out: + pm8001_dbg(pm8001_ha, IO, "pm8001_task_exec failed[%d]!\n", rc); + } + + spin_unlock_irqrestore(&pm8001_ha->lock, flags); + + return rc; +} + +/** + * pm8001_ccb_task_free - free the sg for ssp and smp command, free the ccb. + * @pm8001_ha: our hba card information + * @ccb: the ccb which attached to ssp task to free + */ +void pm8001_ccb_task_free(struct pm8001_hba_info *pm8001_ha, + struct pm8001_ccb_info *ccb) +{ + struct sas_task *task = ccb->task; + struct ata_queued_cmd *qc; + struct pm8001_device *pm8001_dev; + + if (!task) + return; + + if (!sas_protocol_ata(task->task_proto) && ccb->n_elem) + dma_unmap_sg(pm8001_ha->dev, task->scatter, + task->num_scatter, task->data_dir); + + switch (task->task_proto) { + case SAS_PROTOCOL_SMP: + dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_resp, 1, + DMA_FROM_DEVICE); + dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_req, 1, + DMA_TO_DEVICE); + break; + + case SAS_PROTOCOL_SATA: + case SAS_PROTOCOL_STP: + case SAS_PROTOCOL_SSP: + default: + /* do nothing */ + break; + } + + if (sas_protocol_ata(task->task_proto)) { + /* For SCSI/ATA commands uldd_task points to ata_queued_cmd */ + qc = task->uldd_task; + pm8001_dev = ccb->device; + trace_pm80xx_request_complete(pm8001_ha->id, + pm8001_dev ? pm8001_dev->attached_phy : PM8001_MAX_PHYS, + ccb->ccb_tag, 0 /* ctlr_opcode not known */, + qc ? qc->tf.command : 0, // ata opcode + pm8001_dev ? atomic_read(&pm8001_dev->running_req) : -1); + } + + task->lldd_task = NULL; + pm8001_ccb_free(pm8001_ha, ccb); +} + +/** + * pm8001_alloc_dev - find a empty pm8001_device + * @pm8001_ha: our hba card information + */ +static struct pm8001_device *pm8001_alloc_dev(struct pm8001_hba_info *pm8001_ha) +{ + u32 dev; + for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) { + if (pm8001_ha->devices[dev].dev_type == SAS_PHY_UNUSED) { + pm8001_ha->devices[dev].id = dev; + return &pm8001_ha->devices[dev]; + } + } + if (dev == PM8001_MAX_DEVICES) { + pm8001_dbg(pm8001_ha, FAIL, + "max support %d devices, ignore ..\n", + PM8001_MAX_DEVICES); + } + return NULL; +} +/** + * pm8001_find_dev - find a matching pm8001_device + * @pm8001_ha: our hba card information + * @device_id: device ID to match against + */ +struct pm8001_device *pm8001_find_dev(struct pm8001_hba_info *pm8001_ha, + u32 device_id) +{ + u32 dev; + for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) { + if (pm8001_ha->devices[dev].device_id == device_id) + return &pm8001_ha->devices[dev]; + } + if (dev == PM8001_MAX_DEVICES) { + pm8001_dbg(pm8001_ha, FAIL, "NO MATCHING DEVICE FOUND !!!\n"); + } + return NULL; +} + +void pm8001_free_dev(struct pm8001_device *pm8001_dev) +{ + u32 id = pm8001_dev->id; + memset(pm8001_dev, 0, sizeof(*pm8001_dev)); + pm8001_dev->id = id; + pm8001_dev->dev_type = SAS_PHY_UNUSED; + pm8001_dev->device_id = PM8001_MAX_DEVICES; + pm8001_dev->sas_device = NULL; +} + +/** + * pm8001_dev_found_notify - libsas notify a device is found. + * @dev: the device structure which sas layer used. + * + * when libsas find a sas domain device, it should tell the LLDD that + * device is found, and then LLDD register this device to HBA firmware + * by the command "OPC_INB_REG_DEV", after that the HBA will assign a + * device ID(according to device's sas address) and returned it to LLDD. From + * now on, we communicate with HBA FW with the device ID which HBA assigned + * rather than sas address. it is the necessary step for our HBA but it is + * the optional for other HBA driver. + */ +static int pm8001_dev_found_notify(struct domain_device *dev) +{ + unsigned long flags = 0; + int res = 0; + struct pm8001_hba_info *pm8001_ha = NULL; + struct domain_device *parent_dev = dev->parent; + struct pm8001_device *pm8001_device; + DECLARE_COMPLETION_ONSTACK(completion); + u32 flag = 0; + pm8001_ha = pm8001_find_ha_by_dev(dev); + spin_lock_irqsave(&pm8001_ha->lock, flags); + + pm8001_device = pm8001_alloc_dev(pm8001_ha); + if (!pm8001_device) { + res = -1; + goto found_out; + } + pm8001_device->sas_device = dev; + dev->lldd_dev = pm8001_device; + pm8001_device->dev_type = dev->dev_type; + pm8001_device->dcompletion = &completion; + if (parent_dev && dev_is_expander(parent_dev->dev_type)) { + int phy_id; + + phy_id = sas_find_attached_phy_id(&parent_dev->ex_dev, dev); + if (phy_id < 0) { + pm8001_dbg(pm8001_ha, FAIL, + "Error: no attached dev:%016llx at ex:%016llx.\n", + SAS_ADDR(dev->sas_addr), + SAS_ADDR(parent_dev->sas_addr)); + res = phy_id; + } else { + pm8001_device->attached_phy = phy_id; + } + } else { + if (dev->dev_type == SAS_SATA_DEV) { + pm8001_device->attached_phy = + dev->rphy->identify.phy_identifier; + flag = 1; /* directly sata */ + } + } /*register this device to HBA*/ + pm8001_dbg(pm8001_ha, DISC, "Found device\n"); + PM8001_CHIP_DISP->reg_dev_req(pm8001_ha, pm8001_device, flag); + spin_unlock_irqrestore(&pm8001_ha->lock, flags); + wait_for_completion(&completion); + if (dev->dev_type == SAS_END_DEVICE) + msleep(50); + pm8001_ha->flags = PM8001F_RUN_TIME; + return 0; +found_out: + spin_unlock_irqrestore(&pm8001_ha->lock, flags); + return res; +} + +int pm8001_dev_found(struct domain_device *dev) +{ + return pm8001_dev_found_notify(dev); +} + +#define PM8001_TASK_TIMEOUT 20 + +/** + * pm8001_dev_gone_notify - see the comments for "pm8001_dev_found_notify" + * @dev: the device structure which sas layer used. + */ +static void pm8001_dev_gone_notify(struct domain_device *dev) +{ + unsigned long flags = 0; + struct pm8001_hba_info *pm8001_ha; + struct pm8001_device *pm8001_dev = dev->lldd_dev; + + pm8001_ha = pm8001_find_ha_by_dev(dev); + spin_lock_irqsave(&pm8001_ha->lock, flags); + if (pm8001_dev) { + u32 device_id = pm8001_dev->device_id; + + pm8001_dbg(pm8001_ha, DISC, "found dev[%d:%x] is gone.\n", + pm8001_dev->device_id, pm8001_dev->dev_type); + if (atomic_read(&pm8001_dev->running_req)) { + spin_unlock_irqrestore(&pm8001_ha->lock, flags); + sas_execute_internal_abort_dev(dev, 0, NULL); + while (atomic_read(&pm8001_dev->running_req)) + msleep(20); + spin_lock_irqsave(&pm8001_ha->lock, flags); + } + PM8001_CHIP_DISP->dereg_dev_req(pm8001_ha, device_id); + pm8001_free_dev(pm8001_dev); + } else { + pm8001_dbg(pm8001_ha, DISC, "Found dev has gone.\n"); + } + dev->lldd_dev = NULL; + spin_unlock_irqrestore(&pm8001_ha->lock, flags); +} + +void pm8001_dev_gone(struct domain_device *dev) +{ + pm8001_dev_gone_notify(dev); +} + +/* retry commands by ha, by task and/or by device */ +void pm8001_open_reject_retry( + struct pm8001_hba_info *pm8001_ha, + struct sas_task *task_to_close, + struct pm8001_device *device_to_close) +{ + int i; + unsigned long flags; + + if (pm8001_ha == NULL) + return; + + spin_lock_irqsave(&pm8001_ha->lock, flags); + + for (i = 0; i < PM8001_MAX_CCB; i++) { + struct sas_task *task; + struct task_status_struct *ts; + struct pm8001_device *pm8001_dev; + unsigned long flags1; + struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[i]; + + if (ccb->ccb_tag == PM8001_INVALID_TAG) + continue; + + pm8001_dev = ccb->device; + if (!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED)) + continue; + if (!device_to_close) { + uintptr_t d = (uintptr_t)pm8001_dev + - (uintptr_t)&pm8001_ha->devices; + if (((d % sizeof(*pm8001_dev)) != 0) + || ((d / sizeof(*pm8001_dev)) >= PM8001_MAX_DEVICES)) + continue; + } else if (pm8001_dev != device_to_close) + continue; + task = ccb->task; + if (!task || !task->task_done) + continue; + if (task_to_close && (task != task_to_close)) + continue; + ts = &task->task_status; + ts->resp = SAS_TASK_COMPLETE; + /* Force the midlayer to retry */ + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; + if (pm8001_dev) + atomic_dec(&pm8001_dev->running_req); + spin_lock_irqsave(&task->task_state_lock, flags1); + task->task_state_flags &= ~SAS_TASK_STATE_PENDING; + task->task_state_flags |= SAS_TASK_STATE_DONE; + if (unlikely((task->task_state_flags + & SAS_TASK_STATE_ABORTED))) { + spin_unlock_irqrestore(&task->task_state_lock, + flags1); + pm8001_ccb_task_free(pm8001_ha, ccb); + } else { + spin_unlock_irqrestore(&task->task_state_lock, + flags1); + pm8001_ccb_task_free(pm8001_ha, ccb); + mb();/* in order to force CPU ordering */ + spin_unlock_irqrestore(&pm8001_ha->lock, flags); + task->task_done(task); + spin_lock_irqsave(&pm8001_ha->lock, flags); + } + } + + spin_unlock_irqrestore(&pm8001_ha->lock, flags); +} + +/** + * pm8001_I_T_nexus_reset() - reset the initiator/target connection + * @dev: the device structure for the device to reset. + * + * Standard mandates link reset for ATA (type 0) and hard reset for + * SSP (type 1), only for RECOVERY + */ +int pm8001_I_T_nexus_reset(struct domain_device *dev) +{ + int rc = TMF_RESP_FUNC_FAILED; + struct pm8001_device *pm8001_dev; + struct pm8001_hba_info *pm8001_ha; + struct sas_phy *phy; + + if (!dev || !dev->lldd_dev) + return -ENODEV; + + pm8001_dev = dev->lldd_dev; + pm8001_ha = pm8001_find_ha_by_dev(dev); + phy = sas_get_local_phy(dev); + + if (dev_is_sata(dev)) { + if (scsi_is_sas_phy_local(phy)) { + rc = 0; + goto out; + } + rc = sas_phy_reset(phy, 1); + if (rc) { + pm8001_dbg(pm8001_ha, EH, + "phy reset failed for device %x\n" + "with rc %d\n", pm8001_dev->device_id, rc); + rc = TMF_RESP_FUNC_FAILED; + goto out; + } + msleep(2000); + rc = sas_execute_internal_abort_dev(dev, 0, NULL); + if (rc) { + pm8001_dbg(pm8001_ha, EH, "task abort failed %x\n" + "with rc %d\n", pm8001_dev->device_id, rc); + rc = TMF_RESP_FUNC_FAILED; + } + } else { + rc = sas_phy_reset(phy, 1); + msleep(2000); + } + pm8001_dbg(pm8001_ha, EH, " for device[%x]:rc=%d\n", + pm8001_dev->device_id, rc); + out: + sas_put_local_phy(phy); + return rc; +} + +/* +* This function handle the IT_NEXUS_XXX event or completion +* status code for SSP/SATA/SMP I/O request. +*/ +int pm8001_I_T_nexus_event_handler(struct domain_device *dev) +{ + int rc = TMF_RESP_FUNC_FAILED; + struct pm8001_device *pm8001_dev; + struct pm8001_hba_info *pm8001_ha; + struct sas_phy *phy; + + if (!dev || !dev->lldd_dev) + return -1; + + pm8001_dev = dev->lldd_dev; + pm8001_ha = pm8001_find_ha_by_dev(dev); + + pm8001_dbg(pm8001_ha, EH, "I_T_Nexus handler invoked !!\n"); + + phy = sas_get_local_phy(dev); + + if (dev_is_sata(dev)) { + DECLARE_COMPLETION_ONSTACK(completion_setstate); + if (scsi_is_sas_phy_local(phy)) { + rc = 0; + goto out; + } + /* send internal ssp/sata/smp abort command to FW */ + sas_execute_internal_abort_dev(dev, 0, NULL); + msleep(100); + + /* deregister the target device */ + pm8001_dev_gone_notify(dev); + msleep(200); + + /*send phy reset to hard reset target */ + rc = sas_phy_reset(phy, 1); + msleep(2000); + pm8001_dev->setds_completion = &completion_setstate; + + wait_for_completion(&completion_setstate); + } else { + /* send internal ssp/sata/smp abort command to FW */ + sas_execute_internal_abort_dev(dev, 0, NULL); + msleep(100); + + /* deregister the target device */ + pm8001_dev_gone_notify(dev); + msleep(200); + + /*send phy reset to hard reset target */ + rc = sas_phy_reset(phy, 1); + msleep(2000); + } + pm8001_dbg(pm8001_ha, EH, " for device[%x]:rc=%d\n", + pm8001_dev->device_id, rc); +out: + sas_put_local_phy(phy); + + return rc; +} +/* mandatory SAM-3, the task reset the specified LUN*/ +int pm8001_lu_reset(struct domain_device *dev, u8 *lun) +{ + int rc = TMF_RESP_FUNC_FAILED; + struct pm8001_device *pm8001_dev = dev->lldd_dev; + struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev); + DECLARE_COMPLETION_ONSTACK(completion_setstate); + + if (PM8001_CHIP_DISP->fatal_errors(pm8001_ha)) { + /* + * If the controller is in fatal error state, + * we will not get a response from the controller + */ + pm8001_dbg(pm8001_ha, FAIL, + "LUN reset failed due to fatal errors\n"); + return rc; + } + + if (dev_is_sata(dev)) { + struct sas_phy *phy = sas_get_local_phy(dev); + sas_execute_internal_abort_dev(dev, 0, NULL); + rc = sas_phy_reset(phy, 1); + sas_put_local_phy(phy); + pm8001_dev->setds_completion = &completion_setstate; + rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha, + pm8001_dev, DS_OPERATIONAL); + wait_for_completion(&completion_setstate); + } else { + rc = sas_lu_reset(dev, lun); + } + /* If failed, fall-through I_T_Nexus reset */ + pm8001_dbg(pm8001_ha, EH, "for device[%x]:rc=%d\n", + pm8001_dev->device_id, rc); + return rc; +} + +/* optional SAM-3 */ +int pm8001_query_task(struct sas_task *task) +{ + u32 tag = 0xdeadbeef; + int rc = TMF_RESP_FUNC_FAILED; + if (unlikely(!task || !task->lldd_task || !task->dev)) + return rc; + + if (task->task_proto & SAS_PROTOCOL_SSP) { + struct scsi_cmnd *cmnd = task->uldd_task; + struct domain_device *dev = task->dev; + struct pm8001_hba_info *pm8001_ha = + pm8001_find_ha_by_dev(dev); + + rc = pm8001_find_tag(task, &tag); + if (rc == 0) { + rc = TMF_RESP_FUNC_FAILED; + return rc; + } + pm8001_dbg(pm8001_ha, EH, "Query:[%16ph]\n", cmnd->cmnd); + + rc = sas_query_task(task, tag); + switch (rc) { + /* The task is still in Lun, release it then */ + case TMF_RESP_FUNC_SUCC: + pm8001_dbg(pm8001_ha, EH, + "The task is still in Lun\n"); + break; + /* The task is not in Lun or failed, reset the phy */ + case TMF_RESP_FUNC_FAILED: + case TMF_RESP_FUNC_COMPLETE: + pm8001_dbg(pm8001_ha, EH, + "The task is not in Lun or failed, reset the phy\n"); + break; + } + } + pr_err("pm80xx: rc= %d\n", rc); + return rc; +} + +/* mandatory SAM-3, still need free task/ccb info, abort the specified task */ +int pm8001_abort_task(struct sas_task *task) +{ + struct pm8001_ccb_info *ccb = task->lldd_task; + unsigned long flags; + u32 tag; + struct domain_device *dev ; + struct pm8001_hba_info *pm8001_ha; + struct pm8001_device *pm8001_dev; + int rc = TMF_RESP_FUNC_FAILED, ret; + u32 phy_id, port_id; + struct sas_task_slow slow_task; + + if (!task->lldd_task || !task->dev) + return TMF_RESP_FUNC_FAILED; + + dev = task->dev; + pm8001_dev = dev->lldd_dev; + pm8001_ha = pm8001_find_ha_by_dev(dev); + phy_id = pm8001_dev->attached_phy; + + if (PM8001_CHIP_DISP->fatal_errors(pm8001_ha)) { + // If the controller is seeing fatal errors + // abort task will not get a response from the controller + return TMF_RESP_FUNC_FAILED; + } + + ret = pm8001_find_tag(task, &tag); + if (ret == 0) { + pm8001_info(pm8001_ha, "no tag for task:%p\n", task); + return TMF_RESP_FUNC_FAILED; + } + spin_lock_irqsave(&task->task_state_lock, flags); + if (task->task_state_flags & SAS_TASK_STATE_DONE) { + spin_unlock_irqrestore(&task->task_state_lock, flags); + return TMF_RESP_FUNC_COMPLETE; + } + task->task_state_flags |= SAS_TASK_STATE_ABORTED; + if (task->slow_task == NULL) { + init_completion(&slow_task.completion); + task->slow_task = &slow_task; + } + spin_unlock_irqrestore(&task->task_state_lock, flags); + if (task->task_proto & SAS_PROTOCOL_SSP) { + rc = sas_abort_task(task, tag); + sas_execute_internal_abort_single(dev, tag, 0, NULL); + } else if (task->task_proto & SAS_PROTOCOL_SATA || + task->task_proto & SAS_PROTOCOL_STP) { + if (pm8001_ha->chip_id == chip_8006) { + DECLARE_COMPLETION_ONSTACK(completion_reset); + DECLARE_COMPLETION_ONSTACK(completion); + struct pm8001_phy *phy = pm8001_ha->phy + phy_id; + port_id = phy->port->port_id; + + /* 1. Set Device state as Recovery */ + pm8001_dev->setds_completion = &completion; + PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha, + pm8001_dev, DS_IN_RECOVERY); + wait_for_completion(&completion); + + /* 2. Send Phy Control Hard Reset */ + reinit_completion(&completion); + phy->port_reset_status = PORT_RESET_TMO; + phy->reset_success = false; + phy->enable_completion = &completion; + phy->reset_completion = &completion_reset; + ret = PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id, + PHY_HARD_RESET); + if (ret) { + phy->enable_completion = NULL; + phy->reset_completion = NULL; + goto out; + } + + /* In the case of the reset timeout/fail we still + * abort the command at the firmware. The assumption + * here is that the drive is off doing something so + * that it's not processing requests, and we want to + * avoid getting a completion for this and either + * leaking the task in libsas or losing the race and + * getting a double free. + */ + pm8001_dbg(pm8001_ha, MSG, + "Waiting for local phy ctl\n"); + ret = wait_for_completion_timeout(&completion, + PM8001_TASK_TIMEOUT * HZ); + if (!ret || !phy->reset_success) { + phy->enable_completion = NULL; + phy->reset_completion = NULL; + } else { + /* 3. Wait for Port Reset complete or + * Port reset TMO + */ + pm8001_dbg(pm8001_ha, MSG, + "Waiting for Port reset\n"); + ret = wait_for_completion_timeout( + &completion_reset, + PM8001_TASK_TIMEOUT * HZ); + if (!ret) + phy->reset_completion = NULL; + WARN_ON(phy->port_reset_status == + PORT_RESET_TMO); + if (phy->port_reset_status == PORT_RESET_TMO) { + pm8001_dev_gone_notify(dev); + PM8001_CHIP_DISP->hw_event_ack_req( + pm8001_ha, 0, + 0x07, /*HW_EVENT_PHY_DOWN ack*/ + port_id, phy_id, 0, 0); + goto out; + } + } + + /* + * 4. SATA Abort ALL + * we wait for the task to be aborted so that the task + * is removed from the ccb. on success the caller is + * going to free the task. + */ + ret = sas_execute_internal_abort_dev(dev, 0, NULL); + if (ret) + goto out; + ret = wait_for_completion_timeout( + &task->slow_task->completion, + PM8001_TASK_TIMEOUT * HZ); + if (!ret) + goto out; + + /* 5. Set Device State as Operational */ + reinit_completion(&completion); + pm8001_dev->setds_completion = &completion; + PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha, + pm8001_dev, DS_OPERATIONAL); + wait_for_completion(&completion); + } else { + /* + * Ensure that if we see a completion for the ccb + * associated with the task which we are trying to + * abort then we should not touch the sas_task as it + * may race with libsas freeing it when return here. + */ + ccb->task = NULL; + ret = sas_execute_internal_abort_single(dev, tag, 0, NULL); + } + rc = TMF_RESP_FUNC_COMPLETE; + } else if (task->task_proto & SAS_PROTOCOL_SMP) { + /* SMP */ + rc = sas_execute_internal_abort_single(dev, tag, 0, NULL); + + } +out: + spin_lock_irqsave(&task->task_state_lock, flags); + if (task->slow_task == &slow_task) + task->slow_task = NULL; + spin_unlock_irqrestore(&task->task_state_lock, flags); + if (rc != TMF_RESP_FUNC_COMPLETE) + pm8001_info(pm8001_ha, "rc= %d\n", rc); + return rc; +} + +int pm8001_clear_task_set(struct domain_device *dev, u8 *lun) +{ + struct pm8001_device *pm8001_dev = dev->lldd_dev; + struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev); + + pm8001_dbg(pm8001_ha, EH, "I_T_L_Q clear task set[%x]\n", + pm8001_dev->device_id); + return sas_clear_task_set(dev, lun); +} + +void pm8001_port_formed(struct asd_sas_phy *sas_phy) +{ + struct sas_ha_struct *sas_ha = sas_phy->ha; + struct pm8001_hba_info *pm8001_ha = sas_ha->lldd_ha; + struct pm8001_phy *phy = sas_phy->lldd_phy; + struct asd_sas_port *sas_port = sas_phy->port; + struct pm8001_port *port = phy->port; + + if (!sas_port) { + pm8001_dbg(pm8001_ha, FAIL, "Received null port\n"); + return; + } + sas_port->lldd_port = port; +} + +void pm8001_setds_completion(struct domain_device *dev) +{ + struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev); + struct pm8001_device *pm8001_dev = dev->lldd_dev; + DECLARE_COMPLETION_ONSTACK(completion_setstate); + + if (pm8001_ha->chip_id != chip_8001) { + pm8001_dev->setds_completion = &completion_setstate; + PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha, + pm8001_dev, DS_OPERATIONAL); + wait_for_completion(&completion_setstate); + } +} + +void pm8001_tmf_aborted(struct sas_task *task) +{ + struct pm8001_ccb_info *ccb = task->lldd_task; + + if (ccb) + ccb->task = NULL; +} |