summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/pm8001
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/pm8001')
-rw-r--r--drivers/scsi/pm8001/Makefile17
-rw-r--r--drivers/scsi/pm8001/pm8001_chips.h89
-rw-r--r--drivers/scsi/pm8001/pm8001_ctl.c1041
-rw-r--r--drivers/scsi/pm8001/pm8001_ctl.h68
-rw-r--r--drivers/scsi/pm8001/pm8001_defs.h143
-rw-r--r--drivers/scsi/pm8001/pm8001_hwi.c4838
-rw-r--r--drivers/scsi/pm8001/pm8001_hwi.h1030
-rw-r--r--drivers/scsi/pm8001/pm8001_init.c1569
-rw-r--r--drivers/scsi/pm8001/pm8001_sas.c1195
-rw-r--r--drivers/scsi/pm8001/pm8001_sas.h794
-rw-r--r--drivers/scsi/pm8001/pm80xx_hwi.c4940
-rw-r--r--drivers/scsi/pm8001/pm80xx_hwi.h1665
-rw-r--r--drivers/scsi/pm8001/pm80xx_tracepoints.c10
-rw-r--r--drivers/scsi/pm8001/pm80xx_tracepoints.h113
14 files changed, 17512 insertions, 0 deletions
diff --git a/drivers/scsi/pm8001/Makefile b/drivers/scsi/pm8001/Makefile
new file mode 100644
index 0000000000..bbb51b7312
--- /dev/null
+++ b/drivers/scsi/pm8001/Makefile
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Kernel configuration file for the PM8001 SAS/SATA 8x6G based HBA driver
+#
+# Copyright (C) 2008-2009 USI Co., Ltd.
+
+
+obj-$(CONFIG_SCSI_PM8001) += pm80xx.o
+
+CFLAGS_pm80xx_tracepoints.o := -I$(src)
+
+pm80xx-y += pm8001_init.o \
+ pm8001_sas.o \
+ pm8001_ctl.o \
+ pm8001_hwi.o \
+ pm80xx_hwi.o \
+ pm80xx_tracepoints.o
diff --git a/drivers/scsi/pm8001/pm8001_chips.h b/drivers/scsi/pm8001/pm8001_chips.h
new file mode 100644
index 0000000000..9241c78260
--- /dev/null
+++ b/drivers/scsi/pm8001/pm8001_chips.h
@@ -0,0 +1,89 @@
+/*
+ * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#ifndef _PM8001_CHIPS_H_
+#define _PM8001_CHIPS_H_
+
+static inline u32 pm8001_read_32(void *virt_addr)
+{
+ return *((u32 *)virt_addr);
+}
+
+static inline void pm8001_write_32(void *addr, u32 offset, __le32 val)
+{
+ *((__le32 *)(addr + offset)) = val;
+}
+
+static inline u32 pm8001_cr32(struct pm8001_hba_info *pm8001_ha, u32 bar,
+ u32 offset)
+{
+ return readl(pm8001_ha->io_mem[bar].memvirtaddr + offset);
+}
+
+static inline void pm8001_cw32(struct pm8001_hba_info *pm8001_ha, u32 bar,
+ u32 addr, u32 val)
+{
+ writel(val, pm8001_ha->io_mem[bar].memvirtaddr + addr);
+}
+static inline u32 pm8001_mr32(void __iomem *addr, u32 offset)
+{
+ return readl(addr + offset);
+}
+static inline void pm8001_mw32(void __iomem *addr, u32 offset, u32 val)
+{
+ writel(val, addr + offset);
+}
+static inline u32 get_pci_bar_index(u32 pcibar)
+{
+ switch (pcibar) {
+ case 0x18:
+ case 0x1C:
+ return 1;
+ case 0x20:
+ return 2;
+ case 0x24:
+ return 3;
+ default:
+ return 0;
+ }
+}
+
+#endif /* _PM8001_CHIPS_H_ */
+
diff --git a/drivers/scsi/pm8001/pm8001_ctl.c b/drivers/scsi/pm8001/pm8001_ctl.c
new file mode 100644
index 0000000000..5c26a13ffb
--- /dev/null
+++ b/drivers/scsi/pm8001/pm8001_ctl.c
@@ -0,0 +1,1041 @@
+/*
+ * PMC-Sierra 8001/8081/8088/8089 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+#include <linux/firmware.h>
+#include <linux/slab.h>
+#include "pm8001_sas.h"
+#include "pm8001_ctl.h"
+#include "pm8001_chips.h"
+
+/* scsi host attributes */
+
+/**
+ * pm8001_ctl_mpi_interface_rev_show - MPI interface revision number
+ * @cdev: pointer to embedded class device
+ * @attr: device attribute (unused)
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_mpi_interface_rev_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+ if (pm8001_ha->chip_id == chip_8001) {
+ return sysfs_emit(buf, "%d\n",
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.interface_rev);
+ } else {
+ return sysfs_emit(buf, "%d\n",
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.interface_rev);
+ }
+}
+static
+DEVICE_ATTR(interface_rev, S_IRUGO, pm8001_ctl_mpi_interface_rev_show, NULL);
+
+/**
+ * controller_fatal_error_show - check controller is under fatal err
+ * @cdev: pointer to embedded class device
+ * @attr: device attribute (unused)
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t controller_fatal_error_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+ return sysfs_emit(buf, "%d\n",
+ pm8001_ha->controller_fatal_error);
+}
+static DEVICE_ATTR_RO(controller_fatal_error);
+
+/**
+ * pm8001_ctl_fw_version_show - firmware version
+ * @cdev: pointer to embedded class device
+ * @attr: device attribute (unused)
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_fw_version_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+ if (pm8001_ha->chip_id == chip_8001) {
+ return sysfs_emit(buf, "%02x.%02x.%02x.%02x\n",
+ (u8)(pm8001_ha->main_cfg_tbl.pm8001_tbl.firmware_rev >> 24),
+ (u8)(pm8001_ha->main_cfg_tbl.pm8001_tbl.firmware_rev >> 16),
+ (u8)(pm8001_ha->main_cfg_tbl.pm8001_tbl.firmware_rev >> 8),
+ (u8)(pm8001_ha->main_cfg_tbl.pm8001_tbl.firmware_rev));
+ } else {
+ return sysfs_emit(buf, "%02x.%02x.%02x.%02x\n",
+ (u8)(pm8001_ha->main_cfg_tbl.pm80xx_tbl.firmware_rev >> 24),
+ (u8)(pm8001_ha->main_cfg_tbl.pm80xx_tbl.firmware_rev >> 16),
+ (u8)(pm8001_ha->main_cfg_tbl.pm80xx_tbl.firmware_rev >> 8),
+ (u8)(pm8001_ha->main_cfg_tbl.pm80xx_tbl.firmware_rev));
+ }
+}
+static DEVICE_ATTR(fw_version, S_IRUGO, pm8001_ctl_fw_version_show, NULL);
+
+/**
+ * pm8001_ctl_ila_version_show - ila version
+ * @cdev: pointer to embedded class device
+ * @attr: device attribute (unused)
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_ila_version_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+ if (pm8001_ha->chip_id != chip_8001) {
+ return sysfs_emit(buf, "%02x.%02x.%02x.%02x\n",
+ (u8)(pm8001_ha->main_cfg_tbl.pm80xx_tbl.ila_version >> 24),
+ (u8)(pm8001_ha->main_cfg_tbl.pm80xx_tbl.ila_version >> 16),
+ (u8)(pm8001_ha->main_cfg_tbl.pm80xx_tbl.ila_version >> 8),
+ (u8)(pm8001_ha->main_cfg_tbl.pm80xx_tbl.ila_version));
+ }
+ return 0;
+}
+static DEVICE_ATTR(ila_version, 0444, pm8001_ctl_ila_version_show, NULL);
+
+/**
+ * pm8001_ctl_inactive_fw_version_show - Inactive firmware version number
+ * @cdev: pointer to embedded class device
+ * @attr: device attribute (unused)
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_inactive_fw_version_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+ if (pm8001_ha->chip_id != chip_8001) {
+ return sysfs_emit(buf, "%02x.%02x.%02x.%02x\n",
+ (u8)(pm8001_ha->main_cfg_tbl.pm80xx_tbl.inc_fw_version >> 24),
+ (u8)(pm8001_ha->main_cfg_tbl.pm80xx_tbl.inc_fw_version >> 16),
+ (u8)(pm8001_ha->main_cfg_tbl.pm80xx_tbl.inc_fw_version >> 8),
+ (u8)(pm8001_ha->main_cfg_tbl.pm80xx_tbl.inc_fw_version));
+ }
+ return 0;
+}
+static
+DEVICE_ATTR(inc_fw_ver, 0444, pm8001_ctl_inactive_fw_version_show, NULL);
+
+/**
+ * pm8001_ctl_max_out_io_show - max outstanding io supported
+ * @cdev: pointer to embedded class device
+ * @attr: device attribute (unused)
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_max_out_io_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+ if (pm8001_ha->chip_id == chip_8001) {
+ return sysfs_emit(buf, "%d\n",
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.max_out_io);
+ } else {
+ return sysfs_emit(buf, "%d\n",
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.max_out_io);
+ }
+}
+static DEVICE_ATTR(max_out_io, S_IRUGO, pm8001_ctl_max_out_io_show, NULL);
+/**
+ * pm8001_ctl_max_devices_show - max devices support
+ * @cdev: pointer to embedded class device
+ * @attr: device attribute (unused)
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_max_devices_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+ if (pm8001_ha->chip_id == chip_8001) {
+ return sysfs_emit(buf, "%04d\n",
+ (u16)(pm8001_ha->main_cfg_tbl.pm8001_tbl.max_sgl >> 16));
+ } else {
+ return sysfs_emit(buf, "%04d\n",
+ (u16)(pm8001_ha->main_cfg_tbl.pm80xx_tbl.max_sgl >> 16));
+ }
+}
+static DEVICE_ATTR(max_devices, S_IRUGO, pm8001_ctl_max_devices_show, NULL);
+/**
+ * pm8001_ctl_max_sg_list_show - max sg list supported iff not 0.0 for no
+ * hardware limitation
+ * @cdev: pointer to embedded class device
+ * @attr: device attribute (unused)
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_max_sg_list_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+ if (pm8001_ha->chip_id == chip_8001) {
+ return sysfs_emit(buf, "%04d\n",
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.max_sgl & 0x0000FFFF);
+ } else {
+ return sysfs_emit(buf, "%04d\n",
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.max_sgl & 0x0000FFFF);
+ }
+}
+static DEVICE_ATTR(max_sg_list, S_IRUGO, pm8001_ctl_max_sg_list_show, NULL);
+
+#define SAS_1_0 0x1
+#define SAS_1_1 0x2
+#define SAS_2_0 0x4
+
+static ssize_t
+show_sas_spec_support_status(unsigned int mode, char *buf)
+{
+ ssize_t len = 0;
+
+ if (mode & SAS_1_1)
+ len = sprintf(buf, "%s", "SAS1.1");
+ if (mode & SAS_2_0)
+ len += sprintf(buf + len, "%s%s", len ? ", " : "", "SAS2.0");
+ len += sprintf(buf + len, "\n");
+
+ return len;
+}
+
+/**
+ * pm8001_ctl_sas_spec_support_show - sas spec supported
+ * @cdev: pointer to embedded class device
+ * @attr: device attribute (unused)
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_sas_spec_support_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ unsigned int mode;
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+ /* fe000000 means supports SAS2.1 */
+ if (pm8001_ha->chip_id == chip_8001)
+ mode = (pm8001_ha->main_cfg_tbl.pm8001_tbl.ctrl_cap_flag &
+ 0xfe000000)>>25;
+ else
+ /* fe000000 means supports SAS2.1 */
+ mode = (pm8001_ha->main_cfg_tbl.pm80xx_tbl.ctrl_cap_flag &
+ 0xfe000000)>>25;
+ return show_sas_spec_support_status(mode, buf);
+}
+static DEVICE_ATTR(sas_spec_support, S_IRUGO,
+ pm8001_ctl_sas_spec_support_show, NULL);
+
+/**
+ * pm8001_ctl_host_sas_address_show - sas address
+ * @cdev: pointer to embedded class device
+ * @attr: device attribute (unused)
+ * @buf: the buffer returned
+ *
+ * This is the controller sas address
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_host_sas_address_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+ return sysfs_emit(buf, "0x%016llx\n",
+ be64_to_cpu(*(__be64 *)pm8001_ha->sas_addr));
+}
+static DEVICE_ATTR(host_sas_address, S_IRUGO,
+ pm8001_ctl_host_sas_address_show, NULL);
+
+/**
+ * pm8001_ctl_logging_level_show - logging level
+ * @cdev: pointer to embedded class device
+ * @attr: device attribute (unused)
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read/write' shost attribute.
+ */
+static ssize_t pm8001_ctl_logging_level_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+ return sysfs_emit(buf, "%08xh\n", pm8001_ha->logging_level);
+}
+
+static ssize_t pm8001_ctl_logging_level_store(struct device *cdev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+ int val = 0;
+
+ if (sscanf(buf, "%x", &val) != 1)
+ return -EINVAL;
+
+ pm8001_ha->logging_level = val;
+ return strlen(buf);
+}
+
+static DEVICE_ATTR(logging_level, S_IRUGO | S_IWUSR,
+ pm8001_ctl_logging_level_show, pm8001_ctl_logging_level_store);
+/**
+ * pm8001_ctl_aap_log_show - aap1 event log
+ * @cdev: pointer to embedded class device
+ * @attr: device attribute (unused)
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_aap_log_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+ u8 *ptr = (u8 *)pm8001_ha->memoryMap.region[AAP1].virt_ptr;
+ int i;
+
+ char *str = buf;
+ int max = 2;
+ for (i = 0; i < max; i++) {
+ str += sprintf(str, "0x%08x 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x"
+ "0x%08x 0x%08x\n",
+ pm8001_ctl_aap1_memmap(ptr, i, 0),
+ pm8001_ctl_aap1_memmap(ptr, i, 4),
+ pm8001_ctl_aap1_memmap(ptr, i, 8),
+ pm8001_ctl_aap1_memmap(ptr, i, 12),
+ pm8001_ctl_aap1_memmap(ptr, i, 16),
+ pm8001_ctl_aap1_memmap(ptr, i, 20),
+ pm8001_ctl_aap1_memmap(ptr, i, 24),
+ pm8001_ctl_aap1_memmap(ptr, i, 28));
+ }
+
+ return str - buf;
+}
+static DEVICE_ATTR(aap_log, S_IRUGO, pm8001_ctl_aap_log_show, NULL);
+/**
+ * pm8001_ctl_ib_queue_log_show - Out bound Queue log
+ * @cdev:pointer to embedded class device
+ * @attr: device attribute (unused)
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_ib_queue_log_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+ int offset;
+ char *str = buf;
+ int start = 0;
+ u32 ib_offset = pm8001_ha->ib_offset;
+ u32 queue_size = pm8001_ha->max_q_num * PM8001_MPI_QUEUE * 128;
+#define IB_MEMMAP(c) \
+ (*(u32 *)((u8 *)pm8001_ha-> \
+ memoryMap.region[ib_offset].virt_ptr + \
+ pm8001_ha->evtlog_ib_offset + (c)))
+
+ for (offset = 0; offset < IB_OB_READ_TIMES; offset++) {
+ str += sprintf(str, "0x%08x\n", IB_MEMMAP(start));
+ start = start + 4;
+ }
+ pm8001_ha->evtlog_ib_offset += SYSFS_OFFSET;
+ if (((pm8001_ha->evtlog_ib_offset) % queue_size) == 0)
+ pm8001_ha->evtlog_ib_offset = 0;
+
+ return str - buf;
+}
+
+static DEVICE_ATTR(ib_log, S_IRUGO, pm8001_ctl_ib_queue_log_show, NULL);
+/**
+ * pm8001_ctl_ob_queue_log_show - Out bound Queue log
+ * @cdev:pointer to embedded class device
+ * @attr: device attribute (unused)
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+
+static ssize_t pm8001_ctl_ob_queue_log_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+ int offset;
+ char *str = buf;
+ int start = 0;
+ u32 ob_offset = pm8001_ha->ob_offset;
+ u32 queue_size = pm8001_ha->max_q_num * PM8001_MPI_QUEUE * 128;
+#define OB_MEMMAP(c) \
+ (*(u32 *)((u8 *)pm8001_ha-> \
+ memoryMap.region[ob_offset].virt_ptr + \
+ pm8001_ha->evtlog_ob_offset + (c)))
+
+ for (offset = 0; offset < IB_OB_READ_TIMES; offset++) {
+ str += sprintf(str, "0x%08x\n", OB_MEMMAP(start));
+ start = start + 4;
+ }
+ pm8001_ha->evtlog_ob_offset += SYSFS_OFFSET;
+ if (((pm8001_ha->evtlog_ob_offset) % queue_size) == 0)
+ pm8001_ha->evtlog_ob_offset = 0;
+
+ return str - buf;
+}
+static DEVICE_ATTR(ob_log, S_IRUGO, pm8001_ctl_ob_queue_log_show, NULL);
+/**
+ * pm8001_ctl_bios_version_show - Bios version Display
+ * @cdev:pointer to embedded class device
+ * @attr: device attribute (unused)
+ * @buf:the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_bios_version_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+ char *str = buf;
+ int bios_index;
+ DECLARE_COMPLETION_ONSTACK(completion);
+ struct pm8001_ioctl_payload payload;
+
+ pm8001_ha->nvmd_completion = &completion;
+ payload.minor_function = 7;
+ payload.offset = 0;
+ payload.rd_length = 4096;
+ payload.func_specific = kzalloc(4096, GFP_KERNEL);
+ if (!payload.func_specific)
+ return -ENOMEM;
+ if (PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload)) {
+ kfree(payload.func_specific);
+ return -ENOMEM;
+ }
+ wait_for_completion(&completion);
+ for (bios_index = BIOSOFFSET; bios_index < BIOS_OFFSET_LIMIT;
+ bios_index++)
+ str += sprintf(str, "%c",
+ *(payload.func_specific+bios_index));
+ kfree(payload.func_specific);
+ return str - buf;
+}
+static DEVICE_ATTR(bios_version, S_IRUGO, pm8001_ctl_bios_version_show, NULL);
+/**
+ * event_log_size_show - event log size
+ * @cdev: pointer to embedded class device
+ * @attr: device attribute (unused)
+ * @buf: the buffer returned
+ *
+ * A sysfs read shost attribute.
+ */
+static ssize_t event_log_size_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+ return sysfs_emit(buf, "%d\n",
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.event_log_size);
+}
+static DEVICE_ATTR_RO(event_log_size);
+/**
+ * pm8001_ctl_iop_log_show - IOP event log
+ * @cdev: pointer to embedded class device
+ * @attr: device attribute (unused)
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_iop_log_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+ char *str = buf;
+ u32 read_size =
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.event_log_size / 1024;
+ static u32 start, end, count;
+ u32 max_read_times = 32;
+ u32 max_count = (read_size * 1024) / (max_read_times * 4);
+ u32 *temp = (u32 *)pm8001_ha->memoryMap.region[IOP].virt_ptr;
+
+ if ((count % max_count) == 0) {
+ start = 0;
+ end = max_read_times;
+ count = 0;
+ } else {
+ start = end;
+ end = end + max_read_times;
+ }
+
+ for (; start < end; start++)
+ str += sprintf(str, "%08x ", *(temp+start));
+ count++;
+ return str - buf;
+}
+static DEVICE_ATTR(iop_log, S_IRUGO, pm8001_ctl_iop_log_show, NULL);
+
+/**
+ * pm8001_ctl_fatal_log_show - fatal error logging
+ * @cdev:pointer to embedded class device
+ * @attr: device attribute
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+
+static ssize_t pm8001_ctl_fatal_log_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ ssize_t count;
+
+ count = pm80xx_get_fatal_dump(cdev, attr, buf);
+ return count;
+}
+
+static DEVICE_ATTR(fatal_log, S_IRUGO, pm8001_ctl_fatal_log_show, NULL);
+
+/**
+ * non_fatal_log_show - non fatal error logging
+ * @cdev:pointer to embedded class device
+ * @attr: device attribute
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t non_fatal_log_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ u32 count;
+
+ count = pm80xx_get_non_fatal_dump(cdev, attr, buf);
+ return count;
+}
+static DEVICE_ATTR_RO(non_fatal_log);
+
+static ssize_t non_fatal_count_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+ return sysfs_emit(buf, "%08x\n",
+ pm8001_ha->non_fatal_count);
+}
+
+static ssize_t non_fatal_count_store(struct device *cdev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+ int val = 0;
+
+ if (kstrtoint(buf, 16, &val) != 0)
+ return -EINVAL;
+
+ pm8001_ha->non_fatal_count = val;
+ return strlen(buf);
+}
+static DEVICE_ATTR_RW(non_fatal_count);
+
+/**
+ * pm8001_ctl_gsm_log_show - gsm dump collection
+ * @cdev:pointer to embedded class device
+ * @attr: device attribute (unused)
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_gsm_log_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ ssize_t count;
+
+ count = pm8001_get_gsm_dump(cdev, SYSFS_OFFSET, buf);
+ return count;
+}
+
+static DEVICE_ATTR(gsm_log, S_IRUGO, pm8001_ctl_gsm_log_show, NULL);
+
+#define FLASH_CMD_NONE 0x00
+#define FLASH_CMD_UPDATE 0x01
+#define FLASH_CMD_SET_NVMD 0x02
+
+struct flash_command {
+ u8 command[8];
+ int code;
+};
+
+static const struct flash_command flash_command_table[] = {
+ {"set_nvmd", FLASH_CMD_SET_NVMD},
+ {"update", FLASH_CMD_UPDATE},
+ {"", FLASH_CMD_NONE} /* Last entry should be NULL. */
+};
+
+struct error_fw {
+ char *reason;
+ int err_code;
+};
+
+static const struct error_fw flash_error_table[] = {
+ {"Failed to open fw image file", FAIL_OPEN_BIOS_FILE},
+ {"image header mismatch", FLASH_UPDATE_HDR_ERR},
+ {"image offset mismatch", FLASH_UPDATE_OFFSET_ERR},
+ {"image CRC Error", FLASH_UPDATE_CRC_ERR},
+ {"image length Error.", FLASH_UPDATE_LENGTH_ERR},
+ {"Failed to program flash chip", FLASH_UPDATE_HW_ERR},
+ {"Flash chip not supported.", FLASH_UPDATE_DNLD_NOT_SUPPORTED},
+ {"Flash update disabled.", FLASH_UPDATE_DISABLED},
+ {"Flash in progress", FLASH_IN_PROGRESS},
+ {"Image file size Error", FAIL_FILE_SIZE},
+ {"Input parameter error", FAIL_PARAMETERS},
+ {"Out of memory", FAIL_OUT_MEMORY},
+ {"OK", 0} /* Last entry err_code = 0. */
+};
+
+static int pm8001_set_nvmd(struct pm8001_hba_info *pm8001_ha)
+{
+ struct pm8001_ioctl_payload *payload;
+ DECLARE_COMPLETION_ONSTACK(completion);
+ u8 *ioctlbuffer;
+ u32 ret;
+ u32 length = 1024 * 5 + sizeof(*payload) - 1;
+
+ if (pm8001_ha->fw_image->size > 4096) {
+ pm8001_ha->fw_status = FAIL_FILE_SIZE;
+ return -EFAULT;
+ }
+
+ ioctlbuffer = kzalloc(length, GFP_KERNEL);
+ if (!ioctlbuffer) {
+ pm8001_ha->fw_status = FAIL_OUT_MEMORY;
+ return -ENOMEM;
+ }
+ payload = (struct pm8001_ioctl_payload *)ioctlbuffer;
+ memcpy((u8 *)&payload->func_specific, (u8 *)pm8001_ha->fw_image->data,
+ pm8001_ha->fw_image->size);
+ payload->wr_length = pm8001_ha->fw_image->size;
+ payload->id = 0;
+ payload->minor_function = 0x1;
+ pm8001_ha->nvmd_completion = &completion;
+ ret = PM8001_CHIP_DISP->set_nvmd_req(pm8001_ha, payload);
+ if (ret) {
+ pm8001_ha->fw_status = FAIL_OUT_MEMORY;
+ goto out;
+ }
+ wait_for_completion(&completion);
+out:
+ kfree(ioctlbuffer);
+ return ret;
+}
+
+static int pm8001_update_flash(struct pm8001_hba_info *pm8001_ha)
+{
+ struct pm8001_ioctl_payload *payload;
+ DECLARE_COMPLETION_ONSTACK(completion);
+ u8 *ioctlbuffer;
+ struct fw_control_info *fwControl;
+ __be32 partitionSizeTmp;
+ u32 partitionSize;
+ u32 loopNumber, loopcount;
+ struct pm8001_fw_image_header *image_hdr;
+ u32 sizeRead = 0;
+ u32 ret = 0;
+ u32 length = 1024 * 16 + sizeof(*payload) - 1;
+ u32 fc_len;
+ u8 *read_buf;
+
+ if (pm8001_ha->fw_image->size < 28) {
+ pm8001_ha->fw_status = FAIL_FILE_SIZE;
+ return -EFAULT;
+ }
+ ioctlbuffer = kzalloc(length, GFP_KERNEL);
+ if (!ioctlbuffer) {
+ pm8001_ha->fw_status = FAIL_OUT_MEMORY;
+ return -ENOMEM;
+ }
+ image_hdr = (struct pm8001_fw_image_header *)pm8001_ha->fw_image->data;
+ while (sizeRead < pm8001_ha->fw_image->size) {
+ partitionSizeTmp =
+ *(__be32 *)((u8 *)&image_hdr->image_length + sizeRead);
+ partitionSize = be32_to_cpu(partitionSizeTmp);
+ loopcount = DIV_ROUND_UP(partitionSize + HEADER_LEN,
+ IOCTL_BUF_SIZE);
+ for (loopNumber = 0; loopNumber < loopcount; loopNumber++) {
+ payload = (struct pm8001_ioctl_payload *)ioctlbuffer;
+ payload->wr_length = 1024*16;
+ payload->id = 0;
+ fwControl =
+ (struct fw_control_info *)&payload->func_specific;
+ fwControl->len = IOCTL_BUF_SIZE; /* IN */
+ fwControl->size = partitionSize + HEADER_LEN;/* IN */
+ fwControl->retcode = 0;/* OUT */
+ fwControl->offset = loopNumber * IOCTL_BUF_SIZE;/*OUT */
+
+ /*
+ * for the last chunk of data in case file size is
+ * not even with 4k, load only the rest
+ */
+
+ read_buf = (u8 *)pm8001_ha->fw_image->data + sizeRead;
+ fc_len = (partitionSize + HEADER_LEN) % IOCTL_BUF_SIZE;
+
+ if (loopcount - loopNumber == 1 && fc_len) {
+ fwControl->len = fc_len;
+ memcpy((u8 *)fwControl->buffer, read_buf, fc_len);
+ sizeRead += fc_len;
+ } else {
+ memcpy((u8 *)fwControl->buffer, read_buf, IOCTL_BUF_SIZE);
+ sizeRead += IOCTL_BUF_SIZE;
+ }
+
+ pm8001_ha->nvmd_completion = &completion;
+ ret = PM8001_CHIP_DISP->fw_flash_update_req(pm8001_ha, payload);
+ if (ret) {
+ pm8001_ha->fw_status = FAIL_OUT_MEMORY;
+ goto out;
+ }
+ wait_for_completion(&completion);
+ if (fwControl->retcode > FLASH_UPDATE_IN_PROGRESS) {
+ pm8001_ha->fw_status = fwControl->retcode;
+ ret = -EFAULT;
+ goto out;
+ }
+ }
+ }
+out:
+ kfree(ioctlbuffer);
+ return ret;
+}
+static ssize_t pm8001_store_update_fw(struct device *cdev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+ char *cmd_ptr, *filename_ptr;
+ int res, i;
+ int flash_command = FLASH_CMD_NONE;
+ int ret;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+
+ /* this test protects us from running two flash processes at once,
+ * so we should start with this test */
+ if (pm8001_ha->fw_status == FLASH_IN_PROGRESS)
+ return -EINPROGRESS;
+ pm8001_ha->fw_status = FLASH_IN_PROGRESS;
+
+ cmd_ptr = kcalloc(count, 2, GFP_KERNEL);
+ if (!cmd_ptr) {
+ pm8001_ha->fw_status = FAIL_OUT_MEMORY;
+ return -ENOMEM;
+ }
+
+ filename_ptr = cmd_ptr + count;
+ res = sscanf(buf, "%s %s", cmd_ptr, filename_ptr);
+ if (res != 2) {
+ pm8001_ha->fw_status = FAIL_PARAMETERS;
+ ret = -EINVAL;
+ goto out;
+ }
+
+ for (i = 0; flash_command_table[i].code != FLASH_CMD_NONE; i++) {
+ if (!memcmp(flash_command_table[i].command,
+ cmd_ptr, strlen(cmd_ptr))) {
+ flash_command = flash_command_table[i].code;
+ break;
+ }
+ }
+ if (flash_command == FLASH_CMD_NONE) {
+ pm8001_ha->fw_status = FAIL_PARAMETERS;
+ ret = -EINVAL;
+ goto out;
+ }
+
+ ret = request_firmware(&pm8001_ha->fw_image,
+ filename_ptr,
+ pm8001_ha->dev);
+
+ if (ret) {
+ pm8001_dbg(pm8001_ha, FAIL,
+ "Failed to load firmware image file %s, error %d\n",
+ filename_ptr, ret);
+ pm8001_ha->fw_status = FAIL_OPEN_BIOS_FILE;
+ goto out;
+ }
+
+ if (FLASH_CMD_UPDATE == flash_command)
+ ret = pm8001_update_flash(pm8001_ha);
+ else
+ ret = pm8001_set_nvmd(pm8001_ha);
+
+ release_firmware(pm8001_ha->fw_image);
+out:
+ kfree(cmd_ptr);
+
+ if (ret)
+ return ret;
+
+ pm8001_ha->fw_status = FLASH_OK;
+ return count;
+}
+
+static ssize_t pm8001_show_update_fw(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ int i;
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+ for (i = 0; flash_error_table[i].err_code != 0; i++) {
+ if (flash_error_table[i].err_code == pm8001_ha->fw_status)
+ break;
+ }
+ if (pm8001_ha->fw_status != FLASH_IN_PROGRESS)
+ pm8001_ha->fw_status = FLASH_OK;
+
+ return snprintf(buf, PAGE_SIZE, "status=%x %s\n",
+ flash_error_table[i].err_code,
+ flash_error_table[i].reason);
+}
+static DEVICE_ATTR(update_fw, S_IRUGO|S_IWUSR|S_IWGRP,
+ pm8001_show_update_fw, pm8001_store_update_fw);
+
+static const char *const mpiStateText[] = {
+ "MPI is not initialized",
+ "MPI is successfully initialized",
+ "MPI termination is in progress",
+ "MPI initialization failed with error in [31:16]"
+};
+
+/**
+ * ctl_mpi_state_show - controller MPI state check
+ * @cdev: pointer to embedded class device
+ * @attr: device attribute (unused)
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t ctl_mpi_state_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+ unsigned int mpidw0;
+
+ mpidw0 = pm8001_mr32(pm8001_ha->general_stat_tbl_addr, 0);
+ return sysfs_emit(buf, "%s\n", mpiStateText[mpidw0 & 0x0003]);
+}
+static DEVICE_ATTR_RO(ctl_mpi_state);
+
+/**
+ * ctl_hmi_error_show - controller MPI initialization fails
+ * @cdev: pointer to embedded class device
+ * @attr: device attribute (unused)
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t ctl_hmi_error_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+ unsigned int mpidw0;
+
+ mpidw0 = pm8001_mr32(pm8001_ha->general_stat_tbl_addr, 0);
+ return sysfs_emit(buf, "0x%08x\n", (mpidw0 >> 16));
+}
+static DEVICE_ATTR_RO(ctl_hmi_error);
+
+/**
+ * ctl_raae_count_show - controller raae count check
+ * @cdev: pointer to embedded class device
+ * @attr: device attribute (unused)
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t ctl_raae_count_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+ unsigned int raaecnt;
+
+ raaecnt = pm8001_mr32(pm8001_ha->general_stat_tbl_addr, 12);
+ return sysfs_emit(buf, "0x%08x\n", raaecnt);
+}
+static DEVICE_ATTR_RO(ctl_raae_count);
+
+/**
+ * ctl_iop0_count_show - controller iop0 count check
+ * @cdev: pointer to embedded class device
+ * @attr: device attribute (unused)
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t ctl_iop0_count_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+ unsigned int iop0cnt;
+
+ iop0cnt = pm8001_mr32(pm8001_ha->general_stat_tbl_addr, 16);
+ return sysfs_emit(buf, "0x%08x\n", iop0cnt);
+}
+static DEVICE_ATTR_RO(ctl_iop0_count);
+
+/**
+ * ctl_iop1_count_show - controller iop1 count check
+ * @cdev: pointer to embedded class device
+ * @attr: device attribute (unused)
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t ctl_iop1_count_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+ unsigned int iop1cnt;
+
+ iop1cnt = pm8001_mr32(pm8001_ha->general_stat_tbl_addr, 20);
+ return sysfs_emit(buf, "0x%08x\n", iop1cnt);
+
+}
+static DEVICE_ATTR_RO(ctl_iop1_count);
+
+static struct attribute *pm8001_host_attrs[] = {
+ &dev_attr_interface_rev.attr,
+ &dev_attr_controller_fatal_error.attr,
+ &dev_attr_fw_version.attr,
+ &dev_attr_update_fw.attr,
+ &dev_attr_aap_log.attr,
+ &dev_attr_iop_log.attr,
+ &dev_attr_fatal_log.attr,
+ &dev_attr_non_fatal_log.attr,
+ &dev_attr_non_fatal_count.attr,
+ &dev_attr_gsm_log.attr,
+ &dev_attr_max_out_io.attr,
+ &dev_attr_max_devices.attr,
+ &dev_attr_max_sg_list.attr,
+ &dev_attr_sas_spec_support.attr,
+ &dev_attr_logging_level.attr,
+ &dev_attr_event_log_size.attr,
+ &dev_attr_host_sas_address.attr,
+ &dev_attr_bios_version.attr,
+ &dev_attr_ib_log.attr,
+ &dev_attr_ob_log.attr,
+ &dev_attr_ila_version.attr,
+ &dev_attr_inc_fw_ver.attr,
+ &dev_attr_ctl_mpi_state.attr,
+ &dev_attr_ctl_hmi_error.attr,
+ &dev_attr_ctl_raae_count.attr,
+ &dev_attr_ctl_iop0_count.attr,
+ &dev_attr_ctl_iop1_count.attr,
+ NULL,
+};
+
+static const struct attribute_group pm8001_host_attr_group = {
+ .attrs = pm8001_host_attrs
+};
+
+const struct attribute_group *pm8001_host_groups[] = {
+ &pm8001_host_attr_group,
+ NULL
+};
diff --git a/drivers/scsi/pm8001/pm8001_ctl.h b/drivers/scsi/pm8001/pm8001_ctl.h
new file mode 100644
index 0000000000..4743f0de22
--- /dev/null
+++ b/drivers/scsi/pm8001/pm8001_ctl.h
@@ -0,0 +1,68 @@
+ /*
+ * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#ifndef PM8001_CTL_H_INCLUDED
+#define PM8001_CTL_H_INCLUDED
+
+#define IOCTL_BUF_SIZE 4096
+#define HEADER_LEN 28
+#define SIZE_OFFSET 16
+
+#define BIOSOFFSET 56
+#define BIOS_OFFSET_LIMIT 61
+
+#define FLASH_OK 0x000000
+#define FAIL_OPEN_BIOS_FILE 0x000100
+#define FAIL_FILE_SIZE 0x000a00
+#define FAIL_PARAMETERS 0x000b00
+#define FAIL_OUT_MEMORY 0x000c00
+#define FLASH_IN_PROGRESS 0x001000
+
+#define IB_OB_READ_TIMES 256
+#define SYSFS_OFFSET 1024
+#define PM80XX_IB_OB_QUEUE_SIZE (32 * 1024)
+#define PM8001_IB_OB_QUEUE_SIZE (16 * 1024)
+
+static inline u32 pm8001_ctl_aap1_memmap(u8 *ptr, int idx, int off)
+{
+ return *(u32 *)(ptr + idx * 32 + off);
+}
+#endif /* PM8001_CTL_H_INCLUDED */
+
diff --git a/drivers/scsi/pm8001/pm8001_defs.h b/drivers/scsi/pm8001/pm8001_defs.h
new file mode 100644
index 0000000000..501b574239
--- /dev/null
+++ b/drivers/scsi/pm8001/pm8001_defs.h
@@ -0,0 +1,143 @@
+/*
+ * PMC-Sierra 8001/8081/8088/8089 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#ifndef _PM8001_DEFS_H_
+#define _PM8001_DEFS_H_
+
+enum chip_flavors {
+ chip_8001,
+ chip_8008,
+ chip_8009,
+ chip_8018,
+ chip_8019,
+ chip_8074,
+ chip_8076,
+ chip_8077,
+ chip_8006,
+ chip_8070,
+ chip_8072
+};
+
+enum phy_speed {
+ PHY_SPEED_15 = 0x01,
+ PHY_SPEED_30 = 0x02,
+ PHY_SPEED_60 = 0x04,
+ PHY_SPEED_120 = 0x08,
+};
+
+enum data_direction {
+ DATA_DIR_NONE = 0x0, /* NO TRANSFER */
+ DATA_DIR_IN = 0x01, /* INBOUND */
+ DATA_DIR_OUT = 0x02, /* OUTBOUND */
+ DATA_DIR_BYRECIPIENT = 0x04, /* UNSPECIFIED */
+};
+
+enum port_type {
+ PORT_TYPE_SAS = (1L << 1),
+ PORT_TYPE_SATA = (1L << 0),
+};
+
+/* driver compile-time configuration */
+#define PM8001_MAX_CCB 1024 /* max ccbs supported */
+#define PM8001_MPI_QUEUE 1024 /* maximum mpi queue entries */
+#define PM8001_MAX_INB_NUM 64
+#define PM8001_MAX_OUTB_NUM 64
+#define PM8001_CAN_QUEUE 508 /* SCSI Queue depth */
+
+/* Inbound/Outbound queue size */
+#define IOMB_SIZE_SPC 64
+#define IOMB_SIZE_SPCV 128
+
+/* unchangeable hardware details */
+#define PM8001_MAX_PHYS 16 /* max. possible phys */
+#define PM8001_MAX_PORTS 16 /* max. possible ports */
+#define PM8001_MAX_DEVICES 2048 /* max supported device */
+#define PM8001_MAX_MSIX_VEC 64 /* max msi-x int for spcv/ve */
+#define PM8001_RESERVE_SLOT 8
+
+#define CONFIG_SCSI_PM8001_MAX_DMA_SG 528
+#define PM8001_MAX_DMA_SG CONFIG_SCSI_PM8001_MAX_DMA_SG
+
+enum memory_region_num {
+ AAP1 = 0x0, /* application acceleration processor */
+ IOP, /* IO processor */
+ NVMD, /* NVM device */
+ FW_FLASH, /* memory for fw flash update */
+ FORENSIC_MEM, /* memory for fw forensic data */
+ USI_MAX_MEMCNT_BASE
+};
+#define PM8001_EVENT_LOG_SIZE (128 * 1024)
+
+/**
+ * maximum DMA memory regions(number of IBQ + number of IBQ CI
+ * + number of OBQ + number of OBQ PI)
+ */
+#define USI_MAX_MEMCNT (USI_MAX_MEMCNT_BASE + ((2 * PM8001_MAX_INB_NUM) \
+ + (2 * PM8001_MAX_OUTB_NUM)))
+/*error code*/
+enum mpi_err {
+ MPI_IO_STATUS_SUCCESS = 0x0,
+ MPI_IO_STATUS_BUSY = 0x01,
+ MPI_IO_STATUS_FAIL = 0x02,
+};
+
+/**
+ * Phy Control constants
+ */
+enum phy_control_type {
+ PHY_LINK_RESET = 0x01,
+ PHY_HARD_RESET = 0x02,
+ PHY_NOTIFY_ENABLE_SPINUP = 0x10,
+};
+
+enum pm8001_hba_info_flags {
+ PM8001F_INIT_TIME = (1U << 0),
+ PM8001F_RUN_TIME = (1U << 1),
+};
+
+/**
+ * Phy Status
+ */
+#define PHY_LINK_DISABLE 0x00
+#define PHY_LINK_DOWN 0x01
+#define PHY_STATE_LINK_UP_SPCV 0x2
+#define PHY_STATE_LINK_UP_SPC 0x1
+
+#endif
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
new file mode 100644
index 0000000000..90069c7b16
--- /dev/null
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -0,0 +1,4838 @@
+/*
+ * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+ #include <linux/slab.h>
+ #include "pm8001_sas.h"
+ #include "pm8001_hwi.h"
+ #include "pm8001_chips.h"
+ #include "pm8001_ctl.h"
+ #include "pm80xx_tracepoints.h"
+
+/**
+ * read_main_config_table - read the configure table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void read_main_config_table(struct pm8001_hba_info *pm8001_ha)
+{
+ void __iomem *address = pm8001_ha->main_cfg_tbl_addr;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.signature =
+ pm8001_mr32(address, 0x00);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.interface_rev =
+ pm8001_mr32(address, 0x04);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.firmware_rev =
+ pm8001_mr32(address, 0x08);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.max_out_io =
+ pm8001_mr32(address, 0x0C);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.max_sgl =
+ pm8001_mr32(address, 0x10);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.ctrl_cap_flag =
+ pm8001_mr32(address, 0x14);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.gst_offset =
+ pm8001_mr32(address, 0x18);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.inbound_queue_offset =
+ pm8001_mr32(address, MAIN_IBQ_OFFSET);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_queue_offset =
+ pm8001_mr32(address, MAIN_OBQ_OFFSET);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.hda_mode_flag =
+ pm8001_mr32(address, MAIN_HDA_FLAGS_OFFSET);
+
+ /* read analog Setting offset from the configuration table */
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.anolog_setup_table_offset =
+ pm8001_mr32(address, MAIN_ANALOG_SETUP_OFFSET);
+
+ /* read Error Dump Offset and Length */
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.fatal_err_dump_offset0 =
+ pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP0_OFFSET);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.fatal_err_dump_length0 =
+ pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP0_LENGTH);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.fatal_err_dump_offset1 =
+ pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP1_OFFSET);
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.fatal_err_dump_length1 =
+ pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP1_LENGTH);
+}
+
+/**
+ * read_general_status_table - read the general status table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void read_general_status_table(struct pm8001_hba_info *pm8001_ha)
+{
+ void __iomem *address = pm8001_ha->general_stat_tbl_addr;
+ pm8001_ha->gs_tbl.pm8001_tbl.gst_len_mpistate =
+ pm8001_mr32(address, 0x00);
+ pm8001_ha->gs_tbl.pm8001_tbl.iq_freeze_state0 =
+ pm8001_mr32(address, 0x04);
+ pm8001_ha->gs_tbl.pm8001_tbl.iq_freeze_state1 =
+ pm8001_mr32(address, 0x08);
+ pm8001_ha->gs_tbl.pm8001_tbl.msgu_tcnt =
+ pm8001_mr32(address, 0x0C);
+ pm8001_ha->gs_tbl.pm8001_tbl.iop_tcnt =
+ pm8001_mr32(address, 0x10);
+ pm8001_ha->gs_tbl.pm8001_tbl.rsvd =
+ pm8001_mr32(address, 0x14);
+ pm8001_ha->gs_tbl.pm8001_tbl.phy_state[0] =
+ pm8001_mr32(address, 0x18);
+ pm8001_ha->gs_tbl.pm8001_tbl.phy_state[1] =
+ pm8001_mr32(address, 0x1C);
+ pm8001_ha->gs_tbl.pm8001_tbl.phy_state[2] =
+ pm8001_mr32(address, 0x20);
+ pm8001_ha->gs_tbl.pm8001_tbl.phy_state[3] =
+ pm8001_mr32(address, 0x24);
+ pm8001_ha->gs_tbl.pm8001_tbl.phy_state[4] =
+ pm8001_mr32(address, 0x28);
+ pm8001_ha->gs_tbl.pm8001_tbl.phy_state[5] =
+ pm8001_mr32(address, 0x2C);
+ pm8001_ha->gs_tbl.pm8001_tbl.phy_state[6] =
+ pm8001_mr32(address, 0x30);
+ pm8001_ha->gs_tbl.pm8001_tbl.phy_state[7] =
+ pm8001_mr32(address, 0x34);
+ pm8001_ha->gs_tbl.pm8001_tbl.gpio_input_val =
+ pm8001_mr32(address, 0x38);
+ pm8001_ha->gs_tbl.pm8001_tbl.rsvd1[0] =
+ pm8001_mr32(address, 0x3C);
+ pm8001_ha->gs_tbl.pm8001_tbl.rsvd1[1] =
+ pm8001_mr32(address, 0x40);
+ pm8001_ha->gs_tbl.pm8001_tbl.recover_err_info[0] =
+ pm8001_mr32(address, 0x44);
+ pm8001_ha->gs_tbl.pm8001_tbl.recover_err_info[1] =
+ pm8001_mr32(address, 0x48);
+ pm8001_ha->gs_tbl.pm8001_tbl.recover_err_info[2] =
+ pm8001_mr32(address, 0x4C);
+ pm8001_ha->gs_tbl.pm8001_tbl.recover_err_info[3] =
+ pm8001_mr32(address, 0x50);
+ pm8001_ha->gs_tbl.pm8001_tbl.recover_err_info[4] =
+ pm8001_mr32(address, 0x54);
+ pm8001_ha->gs_tbl.pm8001_tbl.recover_err_info[5] =
+ pm8001_mr32(address, 0x58);
+ pm8001_ha->gs_tbl.pm8001_tbl.recover_err_info[6] =
+ pm8001_mr32(address, 0x5C);
+ pm8001_ha->gs_tbl.pm8001_tbl.recover_err_info[7] =
+ pm8001_mr32(address, 0x60);
+}
+
+/**
+ * read_inbnd_queue_table - read the inbound queue table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void read_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
+{
+ int i;
+ void __iomem *address = pm8001_ha->inbnd_q_tbl_addr;
+ for (i = 0; i < PM8001_MAX_INB_NUM; i++) {
+ u32 offset = i * 0x20;
+ pm8001_ha->inbnd_q_tbl[i].pi_pci_bar =
+ get_pci_bar_index(pm8001_mr32(address, (offset + 0x14)));
+ pm8001_ha->inbnd_q_tbl[i].pi_offset =
+ pm8001_mr32(address, (offset + 0x18));
+ }
+}
+
+/**
+ * read_outbnd_queue_table - read the outbound queue table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void read_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
+{
+ int i;
+ void __iomem *address = pm8001_ha->outbnd_q_tbl_addr;
+ for (i = 0; i < PM8001_MAX_OUTB_NUM; i++) {
+ u32 offset = i * 0x24;
+ pm8001_ha->outbnd_q_tbl[i].ci_pci_bar =
+ get_pci_bar_index(pm8001_mr32(address, (offset + 0x14)));
+ pm8001_ha->outbnd_q_tbl[i].ci_offset =
+ pm8001_mr32(address, (offset + 0x18));
+ }
+}
+
+/**
+ * init_default_table_values - init the default table.
+ * @pm8001_ha: our hba card information
+ */
+static void init_default_table_values(struct pm8001_hba_info *pm8001_ha)
+{
+ int i;
+ u32 offsetib, offsetob;
+ void __iomem *addressib = pm8001_ha->inbnd_q_tbl_addr;
+ void __iomem *addressob = pm8001_ha->outbnd_q_tbl_addr;
+ u32 ib_offset = pm8001_ha->ib_offset;
+ u32 ob_offset = pm8001_ha->ob_offset;
+ u32 ci_offset = pm8001_ha->ci_offset;
+ u32 pi_offset = pm8001_ha->pi_offset;
+
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.inbound_q_nppd_hppd = 0;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_hw_event_pid0_3 = 0;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_hw_event_pid4_7 = 0;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_ncq_event_pid0_3 = 0;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_ncq_event_pid4_7 = 0;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_tgt_ITNexus_event_pid0_3 =
+ 0;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_tgt_ITNexus_event_pid4_7 =
+ 0;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_tgt_ssp_event_pid0_3 = 0;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_tgt_ssp_event_pid4_7 = 0;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_tgt_smp_event_pid0_3 = 0;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_tgt_smp_event_pid4_7 = 0;
+
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.upper_event_log_addr =
+ pm8001_ha->memoryMap.region[AAP1].phys_addr_hi;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.lower_event_log_addr =
+ pm8001_ha->memoryMap.region[AAP1].phys_addr_lo;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.event_log_size =
+ PM8001_EVENT_LOG_SIZE;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.event_log_option = 0x01;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.upper_iop_event_log_addr =
+ pm8001_ha->memoryMap.region[IOP].phys_addr_hi;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.lower_iop_event_log_addr =
+ pm8001_ha->memoryMap.region[IOP].phys_addr_lo;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.iop_event_log_size =
+ PM8001_EVENT_LOG_SIZE;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.iop_event_log_option = 0x01;
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.fatal_err_interrupt = 0x01;
+ for (i = 0; i < pm8001_ha->max_q_num; i++) {
+ pm8001_ha->inbnd_q_tbl[i].element_pri_size_cnt =
+ PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x00<<30);
+ pm8001_ha->inbnd_q_tbl[i].upper_base_addr =
+ pm8001_ha->memoryMap.region[ib_offset + i].phys_addr_hi;
+ pm8001_ha->inbnd_q_tbl[i].lower_base_addr =
+ pm8001_ha->memoryMap.region[ib_offset + i].phys_addr_lo;
+ pm8001_ha->inbnd_q_tbl[i].base_virt =
+ (u8 *)pm8001_ha->memoryMap.region[ib_offset + i].virt_ptr;
+ pm8001_ha->inbnd_q_tbl[i].total_length =
+ pm8001_ha->memoryMap.region[ib_offset + i].total_len;
+ pm8001_ha->inbnd_q_tbl[i].ci_upper_base_addr =
+ pm8001_ha->memoryMap.region[ci_offset + i].phys_addr_hi;
+ pm8001_ha->inbnd_q_tbl[i].ci_lower_base_addr =
+ pm8001_ha->memoryMap.region[ci_offset + i].phys_addr_lo;
+ pm8001_ha->inbnd_q_tbl[i].ci_virt =
+ pm8001_ha->memoryMap.region[ci_offset + i].virt_ptr;
+ pm8001_write_32(pm8001_ha->inbnd_q_tbl[i].ci_virt, 0, 0);
+ offsetib = i * 0x20;
+ pm8001_ha->inbnd_q_tbl[i].pi_pci_bar =
+ get_pci_bar_index(pm8001_mr32(addressib,
+ (offsetib + 0x14)));
+ pm8001_ha->inbnd_q_tbl[i].pi_offset =
+ pm8001_mr32(addressib, (offsetib + 0x18));
+ pm8001_ha->inbnd_q_tbl[i].producer_idx = 0;
+ pm8001_ha->inbnd_q_tbl[i].consumer_index = 0;
+ }
+ for (i = 0; i < pm8001_ha->max_q_num; i++) {
+ pm8001_ha->outbnd_q_tbl[i].element_size_cnt =
+ PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x01<<30);
+ pm8001_ha->outbnd_q_tbl[i].upper_base_addr =
+ pm8001_ha->memoryMap.region[ob_offset + i].phys_addr_hi;
+ pm8001_ha->outbnd_q_tbl[i].lower_base_addr =
+ pm8001_ha->memoryMap.region[ob_offset + i].phys_addr_lo;
+ pm8001_ha->outbnd_q_tbl[i].base_virt =
+ (u8 *)pm8001_ha->memoryMap.region[ob_offset + i].virt_ptr;
+ pm8001_ha->outbnd_q_tbl[i].total_length =
+ pm8001_ha->memoryMap.region[ob_offset + i].total_len;
+ pm8001_ha->outbnd_q_tbl[i].pi_upper_base_addr =
+ pm8001_ha->memoryMap.region[pi_offset + i].phys_addr_hi;
+ pm8001_ha->outbnd_q_tbl[i].pi_lower_base_addr =
+ pm8001_ha->memoryMap.region[pi_offset + i].phys_addr_lo;
+ pm8001_ha->outbnd_q_tbl[i].interrup_vec_cnt_delay =
+ 0 | (10 << 16) | (i << 24);
+ pm8001_ha->outbnd_q_tbl[i].pi_virt =
+ pm8001_ha->memoryMap.region[pi_offset + i].virt_ptr;
+ pm8001_write_32(pm8001_ha->outbnd_q_tbl[i].pi_virt, 0, 0);
+ offsetob = i * 0x24;
+ pm8001_ha->outbnd_q_tbl[i].ci_pci_bar =
+ get_pci_bar_index(pm8001_mr32(addressob,
+ offsetob + 0x14));
+ pm8001_ha->outbnd_q_tbl[i].ci_offset =
+ pm8001_mr32(addressob, (offsetob + 0x18));
+ pm8001_ha->outbnd_q_tbl[i].consumer_idx = 0;
+ pm8001_ha->outbnd_q_tbl[i].producer_index = 0;
+ }
+}
+
+/**
+ * update_main_config_table - update the main default table to the HBA.
+ * @pm8001_ha: our hba card information
+ */
+static void update_main_config_table(struct pm8001_hba_info *pm8001_ha)
+{
+ void __iomem *address = pm8001_ha->main_cfg_tbl_addr;
+ pm8001_mw32(address, 0x24,
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.inbound_q_nppd_hppd);
+ pm8001_mw32(address, 0x28,
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_hw_event_pid0_3);
+ pm8001_mw32(address, 0x2C,
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_hw_event_pid4_7);
+ pm8001_mw32(address, 0x30,
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_ncq_event_pid0_3);
+ pm8001_mw32(address, 0x34,
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.outbound_ncq_event_pid4_7);
+ pm8001_mw32(address, 0x38,
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.
+ outbound_tgt_ITNexus_event_pid0_3);
+ pm8001_mw32(address, 0x3C,
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.
+ outbound_tgt_ITNexus_event_pid4_7);
+ pm8001_mw32(address, 0x40,
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.
+ outbound_tgt_ssp_event_pid0_3);
+ pm8001_mw32(address, 0x44,
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.
+ outbound_tgt_ssp_event_pid4_7);
+ pm8001_mw32(address, 0x48,
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.
+ outbound_tgt_smp_event_pid0_3);
+ pm8001_mw32(address, 0x4C,
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.
+ outbound_tgt_smp_event_pid4_7);
+ pm8001_mw32(address, 0x50,
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.upper_event_log_addr);
+ pm8001_mw32(address, 0x54,
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.lower_event_log_addr);
+ pm8001_mw32(address, 0x58,
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.event_log_size);
+ pm8001_mw32(address, 0x5C,
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.event_log_option);
+ pm8001_mw32(address, 0x60,
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.upper_iop_event_log_addr);
+ pm8001_mw32(address, 0x64,
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.lower_iop_event_log_addr);
+ pm8001_mw32(address, 0x68,
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.iop_event_log_size);
+ pm8001_mw32(address, 0x6C,
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.iop_event_log_option);
+ pm8001_mw32(address, 0x70,
+ pm8001_ha->main_cfg_tbl.pm8001_tbl.fatal_err_interrupt);
+}
+
+/**
+ * update_inbnd_queue_table - update the inbound queue table to the HBA.
+ * @pm8001_ha: our hba card information
+ * @number: entry in the queue
+ */
+static void update_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha,
+ int number)
+{
+ void __iomem *address = pm8001_ha->inbnd_q_tbl_addr;
+ u16 offset = number * 0x20;
+ pm8001_mw32(address, offset + 0x00,
+ pm8001_ha->inbnd_q_tbl[number].element_pri_size_cnt);
+ pm8001_mw32(address, offset + 0x04,
+ pm8001_ha->inbnd_q_tbl[number].upper_base_addr);
+ pm8001_mw32(address, offset + 0x08,
+ pm8001_ha->inbnd_q_tbl[number].lower_base_addr);
+ pm8001_mw32(address, offset + 0x0C,
+ pm8001_ha->inbnd_q_tbl[number].ci_upper_base_addr);
+ pm8001_mw32(address, offset + 0x10,
+ pm8001_ha->inbnd_q_tbl[number].ci_lower_base_addr);
+}
+
+/**
+ * update_outbnd_queue_table - update the outbound queue table to the HBA.
+ * @pm8001_ha: our hba card information
+ * @number: entry in the queue
+ */
+static void update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha,
+ int number)
+{
+ void __iomem *address = pm8001_ha->outbnd_q_tbl_addr;
+ u16 offset = number * 0x24;
+ pm8001_mw32(address, offset + 0x00,
+ pm8001_ha->outbnd_q_tbl[number].element_size_cnt);
+ pm8001_mw32(address, offset + 0x04,
+ pm8001_ha->outbnd_q_tbl[number].upper_base_addr);
+ pm8001_mw32(address, offset + 0x08,
+ pm8001_ha->outbnd_q_tbl[number].lower_base_addr);
+ pm8001_mw32(address, offset + 0x0C,
+ pm8001_ha->outbnd_q_tbl[number].pi_upper_base_addr);
+ pm8001_mw32(address, offset + 0x10,
+ pm8001_ha->outbnd_q_tbl[number].pi_lower_base_addr);
+ pm8001_mw32(address, offset + 0x1C,
+ pm8001_ha->outbnd_q_tbl[number].interrup_vec_cnt_delay);
+}
+
+/**
+ * pm8001_bar4_shift - function is called to shift BAR base address
+ * @pm8001_ha : our hba card information
+ * @shiftValue : shifting value in memory bar.
+ */
+int pm8001_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue)
+{
+ u32 regVal;
+ unsigned long start;
+
+ /* program the inbound AXI translation Lower Address */
+ pm8001_cw32(pm8001_ha, 1, SPC_IBW_AXI_TRANSLATION_LOW, shiftValue);
+
+ /* confirm the setting is written */
+ start = jiffies + HZ; /* 1 sec */
+ do {
+ regVal = pm8001_cr32(pm8001_ha, 1, SPC_IBW_AXI_TRANSLATION_LOW);
+ } while ((regVal != shiftValue) && time_before(jiffies, start));
+
+ if (regVal != shiftValue) {
+ pm8001_dbg(pm8001_ha, INIT,
+ "TIMEOUT:SPC_IBW_AXI_TRANSLATION_LOW = 0x%x\n",
+ regVal);
+ return -1;
+ }
+ return 0;
+}
+
+/**
+ * mpi_set_phys_g3_with_ssc
+ * @pm8001_ha: our hba card information
+ * @SSCbit: set SSCbit to 0 to disable all phys ssc; 1 to enable all phys ssc.
+ */
+static void mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha,
+ u32 SSCbit)
+{
+ u32 offset, i;
+ unsigned long flags;
+
+#define SAS2_SETTINGS_LOCAL_PHY_0_3_SHIFT_ADDR 0x00030000
+#define SAS2_SETTINGS_LOCAL_PHY_4_7_SHIFT_ADDR 0x00040000
+#define SAS2_SETTINGS_LOCAL_PHY_0_3_OFFSET 0x1074
+#define SAS2_SETTINGS_LOCAL_PHY_4_7_OFFSET 0x1074
+#define PHY_G3_WITHOUT_SSC_BIT_SHIFT 12
+#define PHY_G3_WITH_SSC_BIT_SHIFT 13
+#define SNW3_PHY_CAPABILITIES_PARITY 31
+
+ /*
+ * Using shifted destination address 0x3_0000:0x1074 + 0x4000*N (N=0:3)
+ * Using shifted destination address 0x4_0000:0x1074 + 0x4000*(N-4) (N=4:7)
+ */
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+ if (-1 == pm8001_bar4_shift(pm8001_ha,
+ SAS2_SETTINGS_LOCAL_PHY_0_3_SHIFT_ADDR)) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ return;
+ }
+
+ for (i = 0; i < 4; i++) {
+ offset = SAS2_SETTINGS_LOCAL_PHY_0_3_OFFSET + 0x4000 * i;
+ pm8001_cw32(pm8001_ha, 2, offset, 0x80001501);
+ }
+ /* shift membase 3 for SAS2_SETTINGS_LOCAL_PHY 4 - 7 */
+ if (-1 == pm8001_bar4_shift(pm8001_ha,
+ SAS2_SETTINGS_LOCAL_PHY_4_7_SHIFT_ADDR)) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ return;
+ }
+ for (i = 4; i < 8; i++) {
+ offset = SAS2_SETTINGS_LOCAL_PHY_4_7_OFFSET + 0x4000 * (i-4);
+ pm8001_cw32(pm8001_ha, 2, offset, 0x80001501);
+ }
+ /*************************************************************
+ Change the SSC upspreading value to 0x0 so that upspreading is disabled.
+ Device MABC SMOD0 Controls
+ Address: (via MEMBASE-III):
+ Using shifted destination address 0x0_0000: with Offset 0xD8
+
+ 31:28 R/W Reserved Do not change
+ 27:24 R/W SAS_SMOD_SPRDUP 0000
+ 23:20 R/W SAS_SMOD_SPRDDN 0000
+ 19:0 R/W Reserved Do not change
+ Upon power-up this register will read as 0x8990c016,
+ and I would like you to change the SAS_SMOD_SPRDUP bits to 0b0000
+ so that the written value will be 0x8090c016.
+ This will ensure only down-spreading SSC is enabled on the SPC.
+ *************************************************************/
+ pm8001_cr32(pm8001_ha, 2, 0xd8);
+ pm8001_cw32(pm8001_ha, 2, 0xd8, 0x8000C016);
+
+ /*set the shifted destination address to 0x0 to avoid error operation */
+ pm8001_bar4_shift(pm8001_ha, 0x0);
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ return;
+}
+
+/**
+ * mpi_set_open_retry_interval_reg
+ * @pm8001_ha: our hba card information
+ * @interval: interval time for each OPEN_REJECT (RETRY). The units are in 1us.
+ */
+static void mpi_set_open_retry_interval_reg(struct pm8001_hba_info *pm8001_ha,
+ u32 interval)
+{
+ u32 offset;
+ u32 value;
+ u32 i;
+ unsigned long flags;
+
+#define OPEN_RETRY_INTERVAL_PHY_0_3_SHIFT_ADDR 0x00030000
+#define OPEN_RETRY_INTERVAL_PHY_4_7_SHIFT_ADDR 0x00040000
+#define OPEN_RETRY_INTERVAL_PHY_0_3_OFFSET 0x30B4
+#define OPEN_RETRY_INTERVAL_PHY_4_7_OFFSET 0x30B4
+#define OPEN_RETRY_INTERVAL_REG_MASK 0x0000FFFF
+
+ value = interval & OPEN_RETRY_INTERVAL_REG_MASK;
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+ /* shift bar and set the OPEN_REJECT(RETRY) interval time of PHY 0 -3.*/
+ if (-1 == pm8001_bar4_shift(pm8001_ha,
+ OPEN_RETRY_INTERVAL_PHY_0_3_SHIFT_ADDR)) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ return;
+ }
+ for (i = 0; i < 4; i++) {
+ offset = OPEN_RETRY_INTERVAL_PHY_0_3_OFFSET + 0x4000 * i;
+ pm8001_cw32(pm8001_ha, 2, offset, value);
+ }
+
+ if (-1 == pm8001_bar4_shift(pm8001_ha,
+ OPEN_RETRY_INTERVAL_PHY_4_7_SHIFT_ADDR)) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ return;
+ }
+ for (i = 4; i < 8; i++) {
+ offset = OPEN_RETRY_INTERVAL_PHY_4_7_OFFSET + 0x4000 * (i-4);
+ pm8001_cw32(pm8001_ha, 2, offset, value);
+ }
+ /*set the shifted destination address to 0x0 to avoid error operation */
+ pm8001_bar4_shift(pm8001_ha, 0x0);
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ return;
+}
+
+/**
+ * mpi_init_check - check firmware initialization status.
+ * @pm8001_ha: our hba card information
+ */
+static int mpi_init_check(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 max_wait_count;
+ u32 value;
+ u32 gst_len_mpistate;
+ /* Write bit0=1 to Inbound DoorBell Register to tell the SPC FW the
+ table is updated */
+ pm8001_cw32(pm8001_ha, 0, MSGU_IBDB_SET, SPC_MSGU_CFG_TABLE_UPDATE);
+ /* wait until Inbound DoorBell Clear Register toggled */
+ max_wait_count = 1 * 1000 * 1000;/* 1 sec */
+ do {
+ udelay(1);
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_IBDB_SET);
+ value &= SPC_MSGU_CFG_TABLE_UPDATE;
+ } while ((value != 0) && (--max_wait_count));
+
+ if (!max_wait_count)
+ return -1;
+ /* check the MPI-State for initialization */
+ gst_len_mpistate =
+ pm8001_mr32(pm8001_ha->general_stat_tbl_addr,
+ GST_GSTLEN_MPIS_OFFSET);
+ if (GST_MPI_STATE_INIT != (gst_len_mpistate & GST_MPI_STATE_MASK))
+ return -1;
+ /* check MPI Initialization error */
+ gst_len_mpistate = gst_len_mpistate >> 16;
+ if (0x0000 != gst_len_mpistate)
+ return -1;
+ return 0;
+}
+
+/**
+ * check_fw_ready - The LLDD check if the FW is ready, if not, return error.
+ * @pm8001_ha: our hba card information
+ */
+static int check_fw_ready(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 value, value1;
+ u32 max_wait_count;
+ /* check error state */
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+ value1 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2);
+ /* check AAP error */
+ if (SCRATCH_PAD1_ERR == (value & SCRATCH_PAD_STATE_MASK)) {
+ /* error state */
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0);
+ return -1;
+ }
+
+ /* check IOP error */
+ if (SCRATCH_PAD2_ERR == (value1 & SCRATCH_PAD_STATE_MASK)) {
+ /* error state */
+ value1 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3);
+ return -1;
+ }
+
+ /* bit 4-31 of scratch pad1 should be zeros if it is not
+ in error state*/
+ if (value & SCRATCH_PAD1_STATE_MASK) {
+ /* error case */
+ pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0);
+ return -1;
+ }
+
+ /* bit 2, 4-31 of scratch pad2 should be zeros if it is not
+ in error state */
+ if (value1 & SCRATCH_PAD2_STATE_MASK) {
+ /* error case */
+ return -1;
+ }
+
+ max_wait_count = 1 * 1000 * 1000;/* 1 sec timeout */
+
+ /* wait until scratch pad 1 and 2 registers in ready state */
+ do {
+ udelay(1);
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1)
+ & SCRATCH_PAD1_RDY;
+ value1 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2)
+ & SCRATCH_PAD2_RDY;
+ if ((--max_wait_count) == 0)
+ return -1;
+ } while ((value != SCRATCH_PAD1_RDY) || (value1 != SCRATCH_PAD2_RDY));
+ return 0;
+}
+
+static void init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha)
+{
+ void __iomem *base_addr;
+ u32 value;
+ u32 offset;
+ u32 pcibar;
+ u32 pcilogic;
+
+ value = pm8001_cr32(pm8001_ha, 0, 0x44);
+ offset = value & 0x03FFFFFF;
+ pm8001_dbg(pm8001_ha, INIT, "Scratchpad 0 Offset: %x\n", offset);
+ pcilogic = (value & 0xFC000000) >> 26;
+ pcibar = get_pci_bar_index(pcilogic);
+ pm8001_dbg(pm8001_ha, INIT, "Scratchpad 0 PCI BAR: %d\n", pcibar);
+ pm8001_ha->main_cfg_tbl_addr = base_addr =
+ pm8001_ha->io_mem[pcibar].memvirtaddr + offset;
+ pm8001_ha->general_stat_tbl_addr =
+ base_addr + pm8001_cr32(pm8001_ha, pcibar, offset + 0x18);
+ pm8001_ha->inbnd_q_tbl_addr =
+ base_addr + pm8001_cr32(pm8001_ha, pcibar, offset + 0x1C);
+ pm8001_ha->outbnd_q_tbl_addr =
+ base_addr + pm8001_cr32(pm8001_ha, pcibar, offset + 0x20);
+}
+
+/**
+ * pm8001_chip_init - the main init function that initialize whole PM8001 chip.
+ * @pm8001_ha: our hba card information
+ */
+static int pm8001_chip_init(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 i = 0;
+ u16 deviceid;
+ pci_read_config_word(pm8001_ha->pdev, PCI_DEVICE_ID, &deviceid);
+ /* 8081 controllers need BAR shift to access MPI space
+ * as this is shared with BIOS data */
+ if (deviceid == 0x8081 || deviceid == 0x0042) {
+ if (-1 == pm8001_bar4_shift(pm8001_ha, GSM_SM_BASE)) {
+ pm8001_dbg(pm8001_ha, FAIL,
+ "Shift Bar4 to 0x%x failed\n",
+ GSM_SM_BASE);
+ return -1;
+ }
+ }
+ /* check the firmware status */
+ if (-1 == check_fw_ready(pm8001_ha)) {
+ pm8001_dbg(pm8001_ha, FAIL, "Firmware is not ready!\n");
+ return -EBUSY;
+ }
+
+ /* Initialize pci space address eg: mpi offset */
+ init_pci_device_addresses(pm8001_ha);
+ init_default_table_values(pm8001_ha);
+ read_main_config_table(pm8001_ha);
+ read_general_status_table(pm8001_ha);
+ read_inbnd_queue_table(pm8001_ha);
+ read_outbnd_queue_table(pm8001_ha);
+ /* update main config table ,inbound table and outbound table */
+ update_main_config_table(pm8001_ha);
+ for (i = 0; i < pm8001_ha->max_q_num; i++)
+ update_inbnd_queue_table(pm8001_ha, i);
+ for (i = 0; i < pm8001_ha->max_q_num; i++)
+ update_outbnd_queue_table(pm8001_ha, i);
+ /* 8081 controller donot require these operations */
+ if (deviceid != 0x8081 && deviceid != 0x0042) {
+ mpi_set_phys_g3_with_ssc(pm8001_ha, 0);
+ /* 7->130ms, 34->500ms, 119->1.5s */
+ mpi_set_open_retry_interval_reg(pm8001_ha, 119);
+ }
+ /* notify firmware update finished and check initialization status */
+ if (0 == mpi_init_check(pm8001_ha)) {
+ pm8001_dbg(pm8001_ha, INIT, "MPI initialize successful!\n");
+ } else
+ return -EBUSY;
+ /*This register is a 16-bit timer with a resolution of 1us. This is the
+ timer used for interrupt delay/coalescing in the PCIe Application Layer.
+ Zero is not a valid value. A value of 1 in the register will cause the
+ interrupts to be normal. A value greater than 1 will cause coalescing
+ delays.*/
+ pm8001_cw32(pm8001_ha, 1, 0x0033c0, 0x1);
+ pm8001_cw32(pm8001_ha, 1, 0x0033c4, 0x0);
+ return 0;
+}
+
+static void pm8001_chip_post_init(struct pm8001_hba_info *pm8001_ha)
+{
+}
+
+static int mpi_uninit_check(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 max_wait_count;
+ u32 value;
+ u32 gst_len_mpistate;
+ u16 deviceid;
+ pci_read_config_word(pm8001_ha->pdev, PCI_DEVICE_ID, &deviceid);
+ if (deviceid == 0x8081 || deviceid == 0x0042) {
+ if (-1 == pm8001_bar4_shift(pm8001_ha, GSM_SM_BASE)) {
+ pm8001_dbg(pm8001_ha, FAIL,
+ "Shift Bar4 to 0x%x failed\n",
+ GSM_SM_BASE);
+ return -1;
+ }
+ }
+ init_pci_device_addresses(pm8001_ha);
+ /* Write bit1=1 to Inbound DoorBell Register to tell the SPC FW the
+ table is stop */
+ pm8001_cw32(pm8001_ha, 0, MSGU_IBDB_SET, SPC_MSGU_CFG_TABLE_RESET);
+
+ /* wait until Inbound DoorBell Clear Register toggled */
+ max_wait_count = 1 * 1000 * 1000;/* 1 sec */
+ do {
+ udelay(1);
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_IBDB_SET);
+ value &= SPC_MSGU_CFG_TABLE_RESET;
+ } while ((value != 0) && (--max_wait_count));
+
+ if (!max_wait_count) {
+ pm8001_dbg(pm8001_ha, FAIL, "TIMEOUT:IBDB value/=0x%x\n",
+ value);
+ return -1;
+ }
+
+ /* check the MPI-State for termination in progress */
+ /* wait until Inbound DoorBell Clear Register toggled */
+ max_wait_count = 1 * 1000 * 1000; /* 1 sec */
+ do {
+ udelay(1);
+ gst_len_mpistate =
+ pm8001_mr32(pm8001_ha->general_stat_tbl_addr,
+ GST_GSTLEN_MPIS_OFFSET);
+ if (GST_MPI_STATE_UNINIT ==
+ (gst_len_mpistate & GST_MPI_STATE_MASK))
+ break;
+ } while (--max_wait_count);
+ if (!max_wait_count) {
+ pm8001_dbg(pm8001_ha, FAIL, " TIME OUT MPI State = 0x%x\n",
+ gst_len_mpistate & GST_MPI_STATE_MASK);
+ return -1;
+ }
+ return 0;
+}
+
+/**
+ * soft_reset_ready_check - Function to check FW is ready for soft reset.
+ * @pm8001_ha: our hba card information
+ */
+static u32 soft_reset_ready_check(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 regVal, regVal1, regVal2;
+ if (mpi_uninit_check(pm8001_ha) != 0) {
+ pm8001_dbg(pm8001_ha, FAIL, "MPI state is not ready\n");
+ return -1;
+ }
+ /* read the scratch pad 2 register bit 2 */
+ regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2)
+ & SCRATCH_PAD2_FWRDY_RST;
+ if (regVal == SCRATCH_PAD2_FWRDY_RST) {
+ pm8001_dbg(pm8001_ha, INIT, "Firmware is ready for reset.\n");
+ } else {
+ unsigned long flags;
+ /* Trigger NMI twice via RB6 */
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+ if (-1 == pm8001_bar4_shift(pm8001_ha, RB6_ACCESS_REG)) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ pm8001_dbg(pm8001_ha, FAIL,
+ "Shift Bar4 to 0x%x failed\n",
+ RB6_ACCESS_REG);
+ return -1;
+ }
+ pm8001_cw32(pm8001_ha, 2, SPC_RB6_OFFSET,
+ RB6_MAGIC_NUMBER_RST);
+ pm8001_cw32(pm8001_ha, 2, SPC_RB6_OFFSET, RB6_MAGIC_NUMBER_RST);
+ /* wait for 100 ms */
+ mdelay(100);
+ regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2) &
+ SCRATCH_PAD2_FWRDY_RST;
+ if (regVal != SCRATCH_PAD2_FWRDY_RST) {
+ regVal1 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+ regVal2 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2);
+ pm8001_dbg(pm8001_ha, FAIL, "TIMEOUT:MSGU_SCRATCH_PAD1=0x%x, MSGU_SCRATCH_PAD2=0x%x\n",
+ regVal1, regVal2);
+ pm8001_dbg(pm8001_ha, FAIL,
+ "SCRATCH_PAD0 value = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "SCRATCH_PAD3 value = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3));
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ return -1;
+ }
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ }
+ return 0;
+}
+
+/**
+ * pm8001_chip_soft_rst - soft reset the PM8001 chip, so that the clear all
+ * the FW register status to the originated status.
+ * @pm8001_ha: our hba card information
+ */
+static int
+pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 regVal, toggleVal;
+ u32 max_wait_count;
+ u32 regVal1, regVal2, regVal3;
+ u32 signature = 0x252acbcd; /* for host scratch pad0 */
+ unsigned long flags;
+
+ /* step1: Check FW is ready for soft reset */
+ if (soft_reset_ready_check(pm8001_ha) != 0) {
+ pm8001_dbg(pm8001_ha, FAIL, "FW is not ready\n");
+ return -1;
+ }
+
+ /* step 2: clear NMI status register on AAP1 and IOP, write the same
+ value to clear */
+ /* map 0x60000 to BAR4(0x20), BAR2(win) */
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+ if (-1 == pm8001_bar4_shift(pm8001_ha, MBIC_AAP1_ADDR_BASE)) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ pm8001_dbg(pm8001_ha, FAIL, "Shift Bar4 to 0x%x failed\n",
+ MBIC_AAP1_ADDR_BASE);
+ return -1;
+ }
+ regVal = pm8001_cr32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_IOP);
+ pm8001_dbg(pm8001_ha, INIT, "MBIC - NMI Enable VPE0 (IOP)= 0x%x\n",
+ regVal);
+ pm8001_cw32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_IOP, 0x0);
+ /* map 0x70000 to BAR4(0x20), BAR2(win) */
+ if (-1 == pm8001_bar4_shift(pm8001_ha, MBIC_IOP_ADDR_BASE)) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ pm8001_dbg(pm8001_ha, FAIL, "Shift Bar4 to 0x%x failed\n",
+ MBIC_IOP_ADDR_BASE);
+ return -1;
+ }
+ regVal = pm8001_cr32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_AAP1);
+ pm8001_dbg(pm8001_ha, INIT, "MBIC - NMI Enable VPE0 (AAP1)= 0x%x\n",
+ regVal);
+ pm8001_cw32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_AAP1, 0x0);
+
+ regVal = pm8001_cr32(pm8001_ha, 1, PCIE_EVENT_INTERRUPT_ENABLE);
+ pm8001_dbg(pm8001_ha, INIT, "PCIE -Event Interrupt Enable = 0x%x\n",
+ regVal);
+ pm8001_cw32(pm8001_ha, 1, PCIE_EVENT_INTERRUPT_ENABLE, 0x0);
+
+ regVal = pm8001_cr32(pm8001_ha, 1, PCIE_EVENT_INTERRUPT);
+ pm8001_dbg(pm8001_ha, INIT, "PCIE - Event Interrupt = 0x%x\n",
+ regVal);
+ pm8001_cw32(pm8001_ha, 1, PCIE_EVENT_INTERRUPT, regVal);
+
+ regVal = pm8001_cr32(pm8001_ha, 1, PCIE_ERROR_INTERRUPT_ENABLE);
+ pm8001_dbg(pm8001_ha, INIT, "PCIE -Error Interrupt Enable = 0x%x\n",
+ regVal);
+ pm8001_cw32(pm8001_ha, 1, PCIE_ERROR_INTERRUPT_ENABLE, 0x0);
+
+ regVal = pm8001_cr32(pm8001_ha, 1, PCIE_ERROR_INTERRUPT);
+ pm8001_dbg(pm8001_ha, INIT, "PCIE - Error Interrupt = 0x%x\n", regVal);
+ pm8001_cw32(pm8001_ha, 1, PCIE_ERROR_INTERRUPT, regVal);
+
+ /* read the scratch pad 1 register bit 2 */
+ regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1)
+ & SCRATCH_PAD1_RST;
+ toggleVal = regVal ^ SCRATCH_PAD1_RST;
+
+ /* set signature in host scratch pad0 register to tell SPC that the
+ host performs the soft reset */
+ pm8001_cw32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_0, signature);
+
+ /* read required registers for confirmming */
+ /* map 0x0700000 to BAR4(0x20), BAR2(win) */
+ if (-1 == pm8001_bar4_shift(pm8001_ha, GSM_ADDR_BASE)) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ pm8001_dbg(pm8001_ha, FAIL, "Shift Bar4 to 0x%x failed\n",
+ GSM_ADDR_BASE);
+ return -1;
+ }
+ pm8001_dbg(pm8001_ha, INIT,
+ "GSM 0x0(0x00007b88)-GSM Configuration and Reset = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET));
+
+ /* step 3: host read GSM Configuration and Reset register */
+ regVal = pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET);
+ /* Put those bits to low */
+ /* GSM XCBI offset = 0x70 0000
+ 0x00 Bit 13 COM_SLV_SW_RSTB 1
+ 0x00 Bit 12 QSSP_SW_RSTB 1
+ 0x00 Bit 11 RAAE_SW_RSTB 1
+ 0x00 Bit 9 RB_1_SW_RSTB 1
+ 0x00 Bit 8 SM_SW_RSTB 1
+ */
+ regVal &= ~(0x00003b00);
+ /* host write GSM Configuration and Reset register */
+ pm8001_cw32(pm8001_ha, 2, GSM_CONFIG_RESET, regVal);
+ pm8001_dbg(pm8001_ha, INIT,
+ "GSM 0x0 (0x00007b88 ==> 0x00004088) - GSM Configuration and Reset is set to = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET));
+
+ /* step 4: */
+ /* disable GSM - Read Address Parity Check */
+ regVal1 = pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK);
+ pm8001_dbg(pm8001_ha, INIT,
+ "GSM 0x700038 - Read Address Parity Check Enable = 0x%x\n",
+ regVal1);
+ pm8001_cw32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK, 0x0);
+ pm8001_dbg(pm8001_ha, INIT,
+ "GSM 0x700038 - Read Address Parity Check Enable is set to = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK));
+
+ /* disable GSM - Write Address Parity Check */
+ regVal2 = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK);
+ pm8001_dbg(pm8001_ha, INIT,
+ "GSM 0x700040 - Write Address Parity Check Enable = 0x%x\n",
+ regVal2);
+ pm8001_cw32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK, 0x0);
+ pm8001_dbg(pm8001_ha, INIT,
+ "GSM 0x700040 - Write Address Parity Check Enable is set to = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK));
+
+ /* disable GSM - Write Data Parity Check */
+ regVal3 = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK);
+ pm8001_dbg(pm8001_ha, INIT, "GSM 0x300048 - Write Data Parity Check Enable = 0x%x\n",
+ regVal3);
+ pm8001_cw32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK, 0x0);
+ pm8001_dbg(pm8001_ha, INIT,
+ "GSM 0x300048 - Write Data Parity Check Enable is set to = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK));
+
+ /* step 5: delay 10 usec */
+ udelay(10);
+ /* step 5-b: set GPIO-0 output control to tristate anyway */
+ if (-1 == pm8001_bar4_shift(pm8001_ha, GPIO_ADDR_BASE)) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ pm8001_dbg(pm8001_ha, INIT, "Shift Bar4 to 0x%x failed\n",
+ GPIO_ADDR_BASE);
+ return -1;
+ }
+ regVal = pm8001_cr32(pm8001_ha, 2, GPIO_GPIO_0_0UTPUT_CTL_OFFSET);
+ pm8001_dbg(pm8001_ha, INIT, "GPIO Output Control Register: = 0x%x\n",
+ regVal);
+ /* set GPIO-0 output control to tri-state */
+ regVal &= 0xFFFFFFFC;
+ pm8001_cw32(pm8001_ha, 2, GPIO_GPIO_0_0UTPUT_CTL_OFFSET, regVal);
+
+ /* Step 6: Reset the IOP and AAP1 */
+ /* map 0x00000 to BAR4(0x20), BAR2(win) */
+ if (-1 == pm8001_bar4_shift(pm8001_ha, SPC_TOP_LEVEL_ADDR_BASE)) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ pm8001_dbg(pm8001_ha, FAIL, "SPC Shift Bar4 to 0x%x failed\n",
+ SPC_TOP_LEVEL_ADDR_BASE);
+ return -1;
+ }
+ regVal = pm8001_cr32(pm8001_ha, 2, SPC_REG_RESET);
+ pm8001_dbg(pm8001_ha, INIT, "Top Register before resetting IOP/AAP1:= 0x%x\n",
+ regVal);
+ regVal &= ~(SPC_REG_RESET_PCS_IOP_SS | SPC_REG_RESET_PCS_AAP1_SS);
+ pm8001_cw32(pm8001_ha, 2, SPC_REG_RESET, regVal);
+
+ /* step 7: Reset the BDMA/OSSP */
+ regVal = pm8001_cr32(pm8001_ha, 2, SPC_REG_RESET);
+ pm8001_dbg(pm8001_ha, INIT, "Top Register before resetting BDMA/OSSP: = 0x%x\n",
+ regVal);
+ regVal &= ~(SPC_REG_RESET_BDMA_CORE | SPC_REG_RESET_OSSP);
+ pm8001_cw32(pm8001_ha, 2, SPC_REG_RESET, regVal);
+
+ /* step 8: delay 10 usec */
+ udelay(10);
+
+ /* step 9: bring the BDMA and OSSP out of reset */
+ regVal = pm8001_cr32(pm8001_ha, 2, SPC_REG_RESET);
+ pm8001_dbg(pm8001_ha, INIT,
+ "Top Register before bringing up BDMA/OSSP:= 0x%x\n",
+ regVal);
+ regVal |= (SPC_REG_RESET_BDMA_CORE | SPC_REG_RESET_OSSP);
+ pm8001_cw32(pm8001_ha, 2, SPC_REG_RESET, regVal);
+
+ /* step 10: delay 10 usec */
+ udelay(10);
+
+ /* step 11: reads and sets the GSM Configuration and Reset Register */
+ /* map 0x0700000 to BAR4(0x20), BAR2(win) */
+ if (-1 == pm8001_bar4_shift(pm8001_ha, GSM_ADDR_BASE)) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ pm8001_dbg(pm8001_ha, FAIL, "SPC Shift Bar4 to 0x%x failed\n",
+ GSM_ADDR_BASE);
+ return -1;
+ }
+ pm8001_dbg(pm8001_ha, INIT,
+ "GSM 0x0 (0x00007b88)-GSM Configuration and Reset = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET));
+ regVal = pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET);
+ /* Put those bits to high */
+ /* GSM XCBI offset = 0x70 0000
+ 0x00 Bit 13 COM_SLV_SW_RSTB 1
+ 0x00 Bit 12 QSSP_SW_RSTB 1
+ 0x00 Bit 11 RAAE_SW_RSTB 1
+ 0x00 Bit 9 RB_1_SW_RSTB 1
+ 0x00 Bit 8 SM_SW_RSTB 1
+ */
+ regVal |= (GSM_CONFIG_RESET_VALUE);
+ pm8001_cw32(pm8001_ha, 2, GSM_CONFIG_RESET, regVal);
+ pm8001_dbg(pm8001_ha, INIT, "GSM (0x00004088 ==> 0x00007b88) - GSM Configuration and Reset is set to = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET));
+
+ /* step 12: Restore GSM - Read Address Parity Check */
+ regVal = pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK);
+ /* just for debugging */
+ pm8001_dbg(pm8001_ha, INIT,
+ "GSM 0x700038 - Read Address Parity Check Enable = 0x%x\n",
+ regVal);
+ pm8001_cw32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK, regVal1);
+ pm8001_dbg(pm8001_ha, INIT, "GSM 0x700038 - Read Address Parity Check Enable is set to = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK));
+ /* Restore GSM - Write Address Parity Check */
+ regVal = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK);
+ pm8001_cw32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK, regVal2);
+ pm8001_dbg(pm8001_ha, INIT,
+ "GSM 0x700040 - Write Address Parity Check Enable is set to = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK));
+ /* Restore GSM - Write Data Parity Check */
+ regVal = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK);
+ pm8001_cw32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK, regVal3);
+ pm8001_dbg(pm8001_ha, INIT,
+ "GSM 0x700048 - Write Data Parity Check Enable is set to = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK));
+
+ /* step 13: bring the IOP and AAP1 out of reset */
+ /* map 0x00000 to BAR4(0x20), BAR2(win) */
+ if (-1 == pm8001_bar4_shift(pm8001_ha, SPC_TOP_LEVEL_ADDR_BASE)) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ pm8001_dbg(pm8001_ha, FAIL, "Shift Bar4 to 0x%x failed\n",
+ SPC_TOP_LEVEL_ADDR_BASE);
+ return -1;
+ }
+ regVal = pm8001_cr32(pm8001_ha, 2, SPC_REG_RESET);
+ regVal |= (SPC_REG_RESET_PCS_IOP_SS | SPC_REG_RESET_PCS_AAP1_SS);
+ pm8001_cw32(pm8001_ha, 2, SPC_REG_RESET, regVal);
+
+ /* step 14: delay 10 usec - Normal Mode */
+ udelay(10);
+ /* check Soft Reset Normal mode or Soft Reset HDA mode */
+ if (signature == SPC_SOFT_RESET_SIGNATURE) {
+ /* step 15 (Normal Mode): wait until scratch pad1 register
+ bit 2 toggled */
+ max_wait_count = 2 * 1000 * 1000;/* 2 sec */
+ do {
+ udelay(1);
+ regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1) &
+ SCRATCH_PAD1_RST;
+ } while ((regVal != toggleVal) && (--max_wait_count));
+
+ if (!max_wait_count) {
+ regVal = pm8001_cr32(pm8001_ha, 0,
+ MSGU_SCRATCH_PAD_1);
+ pm8001_dbg(pm8001_ha, FAIL, "TIMEOUT : ToggleVal 0x%x,MSGU_SCRATCH_PAD1 = 0x%x\n",
+ toggleVal, regVal);
+ pm8001_dbg(pm8001_ha, FAIL,
+ "SCRATCH_PAD0 value = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0,
+ MSGU_SCRATCH_PAD_0));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "SCRATCH_PAD2 value = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0,
+ MSGU_SCRATCH_PAD_2));
+ pm8001_dbg(pm8001_ha, FAIL,
+ "SCRATCH_PAD3 value = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0,
+ MSGU_SCRATCH_PAD_3));
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ return -1;
+ }
+
+ /* step 16 (Normal) - Clear ODMR and ODCR */
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, ODCR_CLEAR_ALL);
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_CLEAR_ALL);
+
+ /* step 17 (Normal Mode): wait for the FW and IOP to get
+ ready - 1 sec timeout */
+ /* Wait for the SPC Configuration Table to be ready */
+ if (check_fw_ready(pm8001_ha) == -1) {
+ regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+ /* return error if MPI Configuration Table not ready */
+ pm8001_dbg(pm8001_ha, INIT,
+ "FW not ready SCRATCH_PAD1 = 0x%x\n",
+ regVal);
+ regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2);
+ /* return error if MPI Configuration Table not ready */
+ pm8001_dbg(pm8001_ha, INIT,
+ "FW not ready SCRATCH_PAD2 = 0x%x\n",
+ regVal);
+ pm8001_dbg(pm8001_ha, INIT,
+ "SCRATCH_PAD0 value = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0,
+ MSGU_SCRATCH_PAD_0));
+ pm8001_dbg(pm8001_ha, INIT,
+ "SCRATCH_PAD3 value = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0,
+ MSGU_SCRATCH_PAD_3));
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ return -1;
+ }
+ }
+ pm8001_bar4_shift(pm8001_ha, 0);
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+
+ pm8001_dbg(pm8001_ha, INIT, "SPC soft reset Complete\n");
+ return 0;
+}
+
+static void pm8001_hw_chip_rst(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 i;
+ u32 regVal;
+ pm8001_dbg(pm8001_ha, INIT, "chip reset start\n");
+
+ /* do SPC chip reset. */
+ regVal = pm8001_cr32(pm8001_ha, 1, SPC_REG_RESET);
+ regVal &= ~(SPC_REG_RESET_DEVICE);
+ pm8001_cw32(pm8001_ha, 1, SPC_REG_RESET, regVal);
+
+ /* delay 10 usec */
+ udelay(10);
+
+ /* bring chip reset out of reset */
+ regVal = pm8001_cr32(pm8001_ha, 1, SPC_REG_RESET);
+ regVal |= SPC_REG_RESET_DEVICE;
+ pm8001_cw32(pm8001_ha, 1, SPC_REG_RESET, regVal);
+
+ /* delay 10 usec */
+ udelay(10);
+
+ /* wait for 20 msec until the firmware gets reloaded */
+ i = 20;
+ do {
+ mdelay(1);
+ } while ((--i) != 0);
+
+ pm8001_dbg(pm8001_ha, INIT, "chip reset finished\n");
+}
+
+/**
+ * pm8001_chip_iounmap - which mapped when initialized.
+ * @pm8001_ha: our hba card information
+ */
+void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha)
+{
+ s8 bar, logical = 0;
+ for (bar = 0; bar < PCI_STD_NUM_BARS; bar++) {
+ /*
+ ** logical BARs for SPC:
+ ** bar 0 and 1 - logical BAR0
+ ** bar 2 and 3 - logical BAR1
+ ** bar4 - logical BAR2
+ ** bar5 - logical BAR3
+ ** Skip the appropriate assignments:
+ */
+ if ((bar == 1) || (bar == 3))
+ continue;
+ if (pm8001_ha->io_mem[logical].memvirtaddr) {
+ iounmap(pm8001_ha->io_mem[logical].memvirtaddr);
+ logical++;
+ }
+ }
+}
+
+#ifndef PM8001_USE_MSIX
+/**
+ * pm8001_chip_intx_interrupt_enable - enable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
+static void
+pm8001_chip_intx_interrupt_enable(struct pm8001_hba_info *pm8001_ha)
+{
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_CLEAR_ALL);
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, ODCR_CLEAR_ALL);
+}
+
+/**
+ * pm8001_chip_intx_interrupt_disable - disable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
+static void
+pm8001_chip_intx_interrupt_disable(struct pm8001_hba_info *pm8001_ha)
+{
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_MASK_ALL);
+}
+
+#else
+
+/**
+ * pm8001_chip_msix_interrupt_enable - enable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ * @int_vec_idx: interrupt number to enable
+ */
+static void
+pm8001_chip_msix_interrupt_enable(struct pm8001_hba_info *pm8001_ha,
+ u32 int_vec_idx)
+{
+ u32 msi_index;
+ u32 value;
+ msi_index = int_vec_idx * MSIX_TABLE_ELEMENT_SIZE;
+ msi_index += MSIX_TABLE_BASE;
+ pm8001_cw32(pm8001_ha, 0, msi_index, MSIX_INTERRUPT_ENABLE);
+ value = (1 << int_vec_idx);
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, value);
+
+}
+
+/**
+ * pm8001_chip_msix_interrupt_disable - disable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ * @int_vec_idx: interrupt number to disable
+ */
+static void
+pm8001_chip_msix_interrupt_disable(struct pm8001_hba_info *pm8001_ha,
+ u32 int_vec_idx)
+{
+ u32 msi_index;
+ msi_index = int_vec_idx * MSIX_TABLE_ELEMENT_SIZE;
+ msi_index += MSIX_TABLE_BASE;
+ pm8001_cw32(pm8001_ha, 0, msi_index, MSIX_INTERRUPT_DISABLE);
+}
+#endif
+
+/**
+ * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ * @vec: unused
+ */
+static void
+pm8001_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec)
+{
+#ifdef PM8001_USE_MSIX
+ pm8001_chip_msix_interrupt_enable(pm8001_ha, 0);
+#else
+ pm8001_chip_intx_interrupt_enable(pm8001_ha);
+#endif
+}
+
+/**
+ * pm8001_chip_interrupt_disable - disable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ * @vec: unused
+ */
+static void
+pm8001_chip_interrupt_disable(struct pm8001_hba_info *pm8001_ha, u8 vec)
+{
+#ifdef PM8001_USE_MSIX
+ pm8001_chip_msix_interrupt_disable(pm8001_ha, 0);
+#else
+ pm8001_chip_intx_interrupt_disable(pm8001_ha);
+#endif
+}
+
+/**
+ * pm8001_mpi_msg_free_get - get the free message buffer for transfer
+ * inbound queue.
+ * @circularQ: the inbound queue we want to transfer to HBA.
+ * @messageSize: the message size of this transfer, normally it is 64 bytes
+ * @messagePtr: the pointer to message.
+ */
+int pm8001_mpi_msg_free_get(struct inbound_queue_table *circularQ,
+ u16 messageSize, void **messagePtr)
+{
+ u32 offset, consumer_index;
+ struct mpi_msg_hdr *msgHeader;
+ u8 bcCount = 1; /* only support single buffer */
+
+ /* Checks is the requested message size can be allocated in this queue*/
+ if (messageSize > IOMB_SIZE_SPCV) {
+ *messagePtr = NULL;
+ return -1;
+ }
+
+ /* Stores the new consumer index */
+ consumer_index = pm8001_read_32(circularQ->ci_virt);
+ circularQ->consumer_index = cpu_to_le32(consumer_index);
+ if (((circularQ->producer_idx + bcCount) % PM8001_MPI_QUEUE) ==
+ le32_to_cpu(circularQ->consumer_index)) {
+ *messagePtr = NULL;
+ return -1;
+ }
+ /* get memory IOMB buffer address */
+ offset = circularQ->producer_idx * messageSize;
+ /* increment to next bcCount element */
+ circularQ->producer_idx = (circularQ->producer_idx + bcCount)
+ % PM8001_MPI_QUEUE;
+ /* Adds that distance to the base of the region virtual address plus
+ the message header size*/
+ msgHeader = (struct mpi_msg_hdr *)(circularQ->base_virt + offset);
+ *messagePtr = ((void *)msgHeader) + sizeof(struct mpi_msg_hdr);
+ return 0;
+}
+
+/**
+ * pm8001_mpi_build_cmd- build the message queue for transfer, update the PI to
+ * FW to tell the fw to get this message from IOMB.
+ * @pm8001_ha: our hba card information
+ * @q_index: the index in the inbound queue we want to transfer to HBA.
+ * @opCode: the operation code represents commands which LLDD and fw recognized.
+ * @payload: the command payload of each operation command.
+ * @nb: size in bytes of the command payload
+ * @responseQueue: queue to interrupt on w/ command response (if any)
+ */
+int pm8001_mpi_build_cmd(struct pm8001_hba_info *pm8001_ha,
+ u32 q_index, u32 opCode, void *payload, size_t nb,
+ u32 responseQueue)
+{
+ u32 Header = 0, hpriority = 0, bc = 1, category = 0x02;
+ void *pMessage;
+ unsigned long flags;
+ struct inbound_queue_table *circularQ = &pm8001_ha->inbnd_q_tbl[q_index];
+ int rv;
+ u32 htag = le32_to_cpu(*(__le32 *)payload);
+
+ trace_pm80xx_mpi_build_cmd(pm8001_ha->id, opCode, htag, q_index,
+ circularQ->producer_idx, le32_to_cpu(circularQ->consumer_index));
+
+ if (WARN_ON(q_index >= pm8001_ha->max_q_num))
+ return -EINVAL;
+
+ spin_lock_irqsave(&circularQ->iq_lock, flags);
+ rv = pm8001_mpi_msg_free_get(circularQ, pm8001_ha->iomb_size,
+ &pMessage);
+ if (rv < 0) {
+ pm8001_dbg(pm8001_ha, IO, "No free mpi buffer\n");
+ rv = -ENOMEM;
+ goto done;
+ }
+
+ if (nb > (pm8001_ha->iomb_size - sizeof(struct mpi_msg_hdr)))
+ nb = pm8001_ha->iomb_size - sizeof(struct mpi_msg_hdr);
+ memcpy(pMessage, payload, nb);
+ if (nb + sizeof(struct mpi_msg_hdr) < pm8001_ha->iomb_size)
+ memset(pMessage + nb, 0, pm8001_ha->iomb_size -
+ (nb + sizeof(struct mpi_msg_hdr)));
+
+ /*Build the header*/
+ Header = ((1 << 31) | (hpriority << 30) | ((bc & 0x1f) << 24)
+ | ((responseQueue & 0x3F) << 16)
+ | ((category & 0xF) << 12) | (opCode & 0xFFF));
+
+ pm8001_write_32((pMessage - 4), 0, cpu_to_le32(Header));
+ /*Update the PI to the firmware*/
+ pm8001_cw32(pm8001_ha, circularQ->pi_pci_bar,
+ circularQ->pi_offset, circularQ->producer_idx);
+ pm8001_dbg(pm8001_ha, DEVIO,
+ "INB Q %x OPCODE:%x , UPDATED PI=%d CI=%d\n",
+ responseQueue, opCode, circularQ->producer_idx,
+ circularQ->consumer_index);
+done:
+ spin_unlock_irqrestore(&circularQ->iq_lock, flags);
+ return rv;
+}
+
+u32 pm8001_mpi_msg_free_set(struct pm8001_hba_info *pm8001_ha, void *pMsg,
+ struct outbound_queue_table *circularQ, u8 bc)
+{
+ u32 producer_index;
+ struct mpi_msg_hdr *msgHeader;
+ struct mpi_msg_hdr *pOutBoundMsgHeader;
+
+ msgHeader = (struct mpi_msg_hdr *)(pMsg - sizeof(struct mpi_msg_hdr));
+ pOutBoundMsgHeader = (struct mpi_msg_hdr *)(circularQ->base_virt +
+ circularQ->consumer_idx * pm8001_ha->iomb_size);
+ if (pOutBoundMsgHeader != msgHeader) {
+ pm8001_dbg(pm8001_ha, FAIL,
+ "consumer_idx = %d msgHeader = %p\n",
+ circularQ->consumer_idx, msgHeader);
+
+ /* Update the producer index from SPC */
+ producer_index = pm8001_read_32(circularQ->pi_virt);
+ circularQ->producer_index = cpu_to_le32(producer_index);
+ pm8001_dbg(pm8001_ha, FAIL,
+ "consumer_idx = %d producer_index = %dmsgHeader = %p\n",
+ circularQ->consumer_idx,
+ circularQ->producer_index, msgHeader);
+ return 0;
+ }
+ /* free the circular queue buffer elements associated with the message*/
+ circularQ->consumer_idx = (circularQ->consumer_idx + bc)
+ % PM8001_MPI_QUEUE;
+ /* update the CI of outbound queue */
+ pm8001_cw32(pm8001_ha, circularQ->ci_pci_bar, circularQ->ci_offset,
+ circularQ->consumer_idx);
+ /* Update the producer index from SPC*/
+ producer_index = pm8001_read_32(circularQ->pi_virt);
+ circularQ->producer_index = cpu_to_le32(producer_index);
+ pm8001_dbg(pm8001_ha, IO, " CI=%d PI=%d\n",
+ circularQ->consumer_idx, circularQ->producer_index);
+ return 0;
+}
+
+/**
+ * pm8001_mpi_msg_consume- get the MPI message from outbound queue
+ * message table.
+ * @pm8001_ha: our hba card information
+ * @circularQ: the outbound queue table.
+ * @messagePtr1: the message contents of this outbound message.
+ * @pBC: the message size.
+ */
+u32 pm8001_mpi_msg_consume(struct pm8001_hba_info *pm8001_ha,
+ struct outbound_queue_table *circularQ,
+ void **messagePtr1, u8 *pBC)
+{
+ struct mpi_msg_hdr *msgHeader;
+ __le32 msgHeader_tmp;
+ u32 header_tmp;
+ do {
+ /* If there are not-yet-delivered messages ... */
+ if (le32_to_cpu(circularQ->producer_index)
+ != circularQ->consumer_idx) {
+ /*Get the pointer to the circular queue buffer element*/
+ msgHeader = (struct mpi_msg_hdr *)
+ (circularQ->base_virt +
+ circularQ->consumer_idx * pm8001_ha->iomb_size);
+ /* read header */
+ header_tmp = pm8001_read_32(msgHeader);
+ msgHeader_tmp = cpu_to_le32(header_tmp);
+ pm8001_dbg(pm8001_ha, DEVIO,
+ "outbound opcode msgheader:%x ci=%d pi=%d\n",
+ msgHeader_tmp, circularQ->consumer_idx,
+ circularQ->producer_index);
+ if (0 != (le32_to_cpu(msgHeader_tmp) & 0x80000000)) {
+ if (OPC_OUB_SKIP_ENTRY !=
+ (le32_to_cpu(msgHeader_tmp) & 0xfff)) {
+ *messagePtr1 =
+ ((u8 *)msgHeader) +
+ sizeof(struct mpi_msg_hdr);
+ *pBC = (u8)((le32_to_cpu(msgHeader_tmp)
+ >> 24) & 0x1f);
+ pm8001_dbg(pm8001_ha, IO,
+ ": CI=%d PI=%d msgHeader=%x\n",
+ circularQ->consumer_idx,
+ circularQ->producer_index,
+ msgHeader_tmp);
+ return MPI_IO_STATUS_SUCCESS;
+ } else {
+ circularQ->consumer_idx =
+ (circularQ->consumer_idx +
+ ((le32_to_cpu(msgHeader_tmp)
+ >> 24) & 0x1f))
+ % PM8001_MPI_QUEUE;
+ msgHeader_tmp = 0;
+ pm8001_write_32(msgHeader, 0, 0);
+ /* update the CI of outbound queue */
+ pm8001_cw32(pm8001_ha,
+ circularQ->ci_pci_bar,
+ circularQ->ci_offset,
+ circularQ->consumer_idx);
+ }
+ } else {
+ circularQ->consumer_idx =
+ (circularQ->consumer_idx +
+ ((le32_to_cpu(msgHeader_tmp) >> 24) &
+ 0x1f)) % PM8001_MPI_QUEUE;
+ msgHeader_tmp = 0;
+ pm8001_write_32(msgHeader, 0, 0);
+ /* update the CI of outbound queue */
+ pm8001_cw32(pm8001_ha, circularQ->ci_pci_bar,
+ circularQ->ci_offset,
+ circularQ->consumer_idx);
+ return MPI_IO_STATUS_FAIL;
+ }
+ } else {
+ u32 producer_index;
+ void *pi_virt = circularQ->pi_virt;
+ /* spurious interrupt during setup if
+ * kexec-ing and driver doing a doorbell access
+ * with the pre-kexec oq interrupt setup
+ */
+ if (!pi_virt)
+ break;
+ /* Update the producer index from SPC */
+ producer_index = pm8001_read_32(pi_virt);
+ circularQ->producer_index = cpu_to_le32(producer_index);
+ }
+ } while (le32_to_cpu(circularQ->producer_index) !=
+ circularQ->consumer_idx);
+ /* while we don't have any more not-yet-delivered message */
+ /* report empty */
+ return MPI_IO_STATUS_BUSY;
+}
+
+void pm8001_work_fn(struct work_struct *work)
+{
+ struct pm8001_work *pw = container_of(work, struct pm8001_work, work);
+ struct pm8001_device *pm8001_dev;
+ struct domain_device *dev;
+
+ /*
+ * So far, all users of this stash an associated structure here.
+ * If we get here, and this pointer is null, then the action
+ * was cancelled. This nullification happens when the device
+ * goes away.
+ */
+ if (pw->handler != IO_FATAL_ERROR) {
+ pm8001_dev = pw->data; /* Most stash device structure */
+ if ((pm8001_dev == NULL)
+ || ((pw->handler != IO_XFER_ERROR_BREAK)
+ && (pm8001_dev->dev_type == SAS_PHY_UNUSED))) {
+ kfree(pw);
+ return;
+ }
+ }
+
+ switch (pw->handler) {
+ case IO_XFER_ERROR_BREAK:
+ { /* This one stashes the sas_task instead */
+ struct sas_task *t = (struct sas_task *)pm8001_dev;
+ struct pm8001_ccb_info *ccb;
+ struct pm8001_hba_info *pm8001_ha = pw->pm8001_ha;
+ unsigned long flags, flags1;
+ struct task_status_struct *ts;
+ int i;
+
+ if (pm8001_query_task(t) == TMF_RESP_FUNC_SUCC)
+ break; /* Task still on lu */
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+
+ spin_lock_irqsave(&t->task_state_lock, flags1);
+ if (unlikely((t->task_state_flags & SAS_TASK_STATE_DONE))) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags1);
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ break; /* Task got completed by another */
+ }
+ spin_unlock_irqrestore(&t->task_state_lock, flags1);
+
+ /* Search for a possible ccb that matches the task */
+ for (i = 0; ccb = NULL, i < PM8001_MAX_CCB; i++) {
+ ccb = &pm8001_ha->ccb_info[i];
+ if ((ccb->ccb_tag != PM8001_INVALID_TAG) &&
+ (ccb->task == t))
+ break;
+ }
+ if (!ccb) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ break; /* Task got freed by another */
+ }
+ ts = &t->task_status;
+ ts->resp = SAS_TASK_COMPLETE;
+ /* Force the midlayer to retry */
+ ts->stat = SAS_QUEUE_FULL;
+ pm8001_dev = ccb->device;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ spin_lock_irqsave(&t->task_state_lock, flags1);
+ t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ t->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags1);
+ pm8001_dbg(pm8001_ha, FAIL, "task 0x%p done with event 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
+ t, pw->handler, ts->resp, ts->stat);
+ pm8001_ccb_task_free(pm8001_ha, ccb);
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ } else {
+ spin_unlock_irqrestore(&t->task_state_lock, flags1);
+ pm8001_ccb_task_free(pm8001_ha, ccb);
+ mb();/* in order to force CPU ordering */
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ t->task_done(t);
+ }
+ } break;
+ case IO_XFER_OPEN_RETRY_TIMEOUT:
+ { /* This one stashes the sas_task instead */
+ struct sas_task *t = (struct sas_task *)pm8001_dev;
+ struct pm8001_ccb_info *ccb;
+ struct pm8001_hba_info *pm8001_ha = pw->pm8001_ha;
+ unsigned long flags, flags1;
+ int i, ret = 0;
+
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
+
+ ret = pm8001_query_task(t);
+
+ if (ret == TMF_RESP_FUNC_SUCC)
+ pm8001_dbg(pm8001_ha, IO, "...Task on lu\n");
+ else if (ret == TMF_RESP_FUNC_COMPLETE)
+ pm8001_dbg(pm8001_ha, IO, "...Task NOT on lu\n");
+ else
+ pm8001_dbg(pm8001_ha, DEVIO, "...query task failed!!!\n");
+
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+
+ spin_lock_irqsave(&t->task_state_lock, flags1);
+
+ if (unlikely((t->task_state_flags & SAS_TASK_STATE_DONE))) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags1);
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ if (ret == TMF_RESP_FUNC_SUCC) /* task on lu */
+ (void)pm8001_abort_task(t);
+ break; /* Task got completed by another */
+ }
+
+ spin_unlock_irqrestore(&t->task_state_lock, flags1);
+
+ /* Search for a possible ccb that matches the task */
+ for (i = 0; ccb = NULL, i < PM8001_MAX_CCB; i++) {
+ ccb = &pm8001_ha->ccb_info[i];
+ if ((ccb->ccb_tag != PM8001_INVALID_TAG) &&
+ (ccb->task == t))
+ break;
+ }
+ if (!ccb) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ if (ret == TMF_RESP_FUNC_SUCC) /* task on lu */
+ (void)pm8001_abort_task(t);
+ break; /* Task got freed by another */
+ }
+
+ pm8001_dev = ccb->device;
+ dev = pm8001_dev->sas_device;
+
+ switch (ret) {
+ case TMF_RESP_FUNC_SUCC: /* task on lu */
+ ccb->open_retry = 1; /* Snub completion */
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ ret = pm8001_abort_task(t);
+ ccb->open_retry = 0;
+ switch (ret) {
+ case TMF_RESP_FUNC_SUCC:
+ case TMF_RESP_FUNC_COMPLETE:
+ break;
+ default: /* device misbehavior */
+ ret = TMF_RESP_FUNC_FAILED;
+ pm8001_dbg(pm8001_ha, IO, "...Reset phy\n");
+ pm8001_I_T_nexus_reset(dev);
+ break;
+ }
+ break;
+
+ case TMF_RESP_FUNC_COMPLETE: /* task not on lu */
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ /* Do we need to abort the task locally? */
+ break;
+
+ default: /* device misbehavior */
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ ret = TMF_RESP_FUNC_FAILED;
+ pm8001_dbg(pm8001_ha, IO, "...Reset phy\n");
+ pm8001_I_T_nexus_reset(dev);
+ }
+
+ if (ret == TMF_RESP_FUNC_FAILED)
+ t = NULL;
+ pm8001_open_reject_retry(pm8001_ha, t, pm8001_dev);
+ pm8001_dbg(pm8001_ha, IO, "...Complete\n");
+ } break;
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+ dev = pm8001_dev->sas_device;
+ pm8001_I_T_nexus_event_handler(dev);
+ break;
+ case IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY:
+ dev = pm8001_dev->sas_device;
+ pm8001_I_T_nexus_reset(dev);
+ break;
+ case IO_DS_IN_ERROR:
+ dev = pm8001_dev->sas_device;
+ pm8001_I_T_nexus_reset(dev);
+ break;
+ case IO_DS_NON_OPERATIONAL:
+ dev = pm8001_dev->sas_device;
+ pm8001_I_T_nexus_reset(dev);
+ break;
+ case IO_FATAL_ERROR:
+ {
+ struct pm8001_hba_info *pm8001_ha = pw->pm8001_ha;
+ struct pm8001_ccb_info *ccb;
+ struct task_status_struct *ts;
+ struct sas_task *task;
+ int i;
+ u32 device_id;
+
+ for (i = 0; ccb = NULL, i < PM8001_MAX_CCB; i++) {
+ ccb = &pm8001_ha->ccb_info[i];
+ task = ccb->task;
+ ts = &task->task_status;
+
+ if (task != NULL) {
+ dev = task->dev;
+ if (!dev) {
+ pm8001_dbg(pm8001_ha, FAIL,
+ "dev is NULL\n");
+ continue;
+ }
+ /*complete sas task and update to top layer */
+ pm8001_ccb_task_free(pm8001_ha, ccb);
+ ts->resp = SAS_TASK_COMPLETE;
+ task->task_done(task);
+ } else if (ccb->ccb_tag != PM8001_INVALID_TAG) {
+ /* complete the internal commands/non-sas task */
+ pm8001_dev = ccb->device;
+ if (pm8001_dev->dcompletion) {
+ complete(pm8001_dev->dcompletion);
+ pm8001_dev->dcompletion = NULL;
+ }
+ complete(pm8001_ha->nvmd_completion);
+ pm8001_ccb_free(pm8001_ha, ccb);
+ }
+ }
+ /* Deregister all the device ids */
+ for (i = 0; i < PM8001_MAX_DEVICES; i++) {
+ pm8001_dev = &pm8001_ha->devices[i];
+ device_id = pm8001_dev->device_id;
+ if (device_id) {
+ PM8001_CHIP_DISP->dereg_dev_req(pm8001_ha, device_id);
+ pm8001_free_dev(pm8001_dev);
+ }
+ }
+ }
+ break;
+ case IO_XFER_ERROR_ABORTED_NCQ_MODE:
+ {
+ dev = pm8001_dev->sas_device;
+ sas_ata_device_link_abort(dev, false);
+ }
+ break;
+ }
+ kfree(pw);
+}
+
+int pm8001_handle_event(struct pm8001_hba_info *pm8001_ha, void *data,
+ int handler)
+{
+ struct pm8001_work *pw;
+ int ret = 0;
+
+ pw = kmalloc(sizeof(struct pm8001_work), GFP_ATOMIC);
+ if (pw) {
+ pw->pm8001_ha = pm8001_ha;
+ pw->data = data;
+ pw->handler = handler;
+ INIT_WORK(&pw->work, pm8001_work_fn);
+ queue_work(pm8001_wq, &pw->work);
+ } else
+ ret = -ENOMEM;
+
+ return ret;
+}
+
+/**
+ * mpi_ssp_completion- process the event that FW response to the SSP request.
+ * @pm8001_ha: our hba card information
+ * @piomb: the message contents of this outbound message.
+ *
+ * When FW has completed a ssp request for example a IO request, after it has
+ * filled the SG data with the data, it will trigger this event representing
+ * that he has finished the job; please check the corresponding buffer.
+ * So we will tell the caller who maybe waiting the result to tell upper layer
+ * that the task has been finished.
+ */
+static void
+mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct sas_task *t;
+ struct pm8001_ccb_info *ccb;
+ unsigned long flags;
+ u32 status;
+ u32 param;
+ u32 tag;
+ struct ssp_completion_resp *psspPayload;
+ struct task_status_struct *ts;
+ struct ssp_response_iu *iu;
+ struct pm8001_device *pm8001_dev;
+ psspPayload = (struct ssp_completion_resp *)(piomb + 4);
+ status = le32_to_cpu(psspPayload->status);
+ tag = le32_to_cpu(psspPayload->tag);
+ ccb = &pm8001_ha->ccb_info[tag];
+ if ((status == IO_ABORTED) && ccb->open_retry) {
+ /* Being completed by another */
+ ccb->open_retry = 0;
+ return;
+ }
+ pm8001_dev = ccb->device;
+ param = le32_to_cpu(psspPayload->param);
+
+ t = ccb->task;
+
+ if (status && status != IO_UNDERFLOW)
+ pm8001_dbg(pm8001_ha, FAIL, "sas IO status 0x%x\n", status);
+ if (unlikely(!t || !t->lldd_task || !t->dev))
+ return;
+ ts = &t->task_status;
+ /* Print sas address of IO failed device */
+ if ((status != IO_SUCCESS) && (status != IO_OVERFLOW) &&
+ (status != IO_UNDERFLOW))
+ pm8001_dbg(pm8001_ha, FAIL, "SAS Address of IO Failure Drive:%016llx\n",
+ SAS_ADDR(t->dev->sas_addr));
+
+ if (status)
+ pm8001_dbg(pm8001_ha, IOERR,
+ "status:0x%x, tag:0x%x, task:0x%p\n",
+ status, tag, t);
+
+ switch (status) {
+ case IO_SUCCESS:
+ pm8001_dbg(pm8001_ha, IO, "IO_SUCCESS,param = %d\n",
+ param);
+ if (param == 0) {
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_SAM_STAT_GOOD;
+ } else {
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_PROTO_RESPONSE;
+ ts->residual = param;
+ iu = &psspPayload->ssp_resp_iu;
+ sas_ssp_task_response(pm8001_ha->dev, t, iu);
+ }
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_ABORTED:
+ pm8001_dbg(pm8001_ha, IO, "IO_ABORTED IOMB Tag\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_ABORTED_TASK;
+ break;
+ case IO_UNDERFLOW:
+ /* SSP Completion with error */
+ pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW,param = %d\n",
+ param);
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_UNDERRUN;
+ ts->residual = param;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_NO_DEVICE:
+ pm8001_dbg(pm8001_ha, IO, "IO_NO_DEVICE\n");
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_PHY_DOWN;
+ break;
+ case IO_XFER_ERROR_BREAK:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ /* Force the midlayer to retry */
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_XFER_ERROR_PHY_NOT_READY:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_EPROTO;
+ break;
+ case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ break;
+ case IO_OPEN_CNX_ERROR_BREAK:
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ if (!t->uldd_task)
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+ break;
+ case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+ break;
+ case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+ break;
+ case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n");
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+ break;
+ case IO_XFER_ERROR_NAK_RECEIVED:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_NAK_RECEIVED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_ACK_NAK_TIMEOUT\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_NAK_R_ERR;
+ break;
+ case IO_XFER_ERROR_DMA:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_DMA\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ break;
+ case IO_XFER_OPEN_RETRY_TIMEOUT:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_XFER_ERROR_OFFSET_MISMATCH:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_OFFSET_MISMATCH\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ break;
+ case IO_PORT_IN_RESET:
+ pm8001_dbg(pm8001_ha, IO, "IO_PORT_IN_RESET\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ break;
+ case IO_DS_NON_OPERATIONAL:
+ pm8001_dbg(pm8001_ha, IO, "IO_DS_NON_OPERATIONAL\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ if (!t->uldd_task)
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_DS_NON_OPERATIONAL);
+ break;
+ case IO_DS_IN_RECOVERY:
+ pm8001_dbg(pm8001_ha, IO, "IO_DS_IN_RECOVERY\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ break;
+ case IO_TM_TAG_NOT_FOUND:
+ pm8001_dbg(pm8001_ha, IO, "IO_TM_TAG_NOT_FOUND\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ break;
+ case IO_SSP_EXT_IU_ZERO_LEN_ERROR:
+ pm8001_dbg(pm8001_ha, IO, "IO_SSP_EXT_IU_ZERO_LEN_ERROR\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ break;
+ case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ default:
+ pm8001_dbg(pm8001_ha, DEVIO, "Unknown status 0x%x\n", status);
+ /* not allowed case. Therefore, return failed status */
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ break;
+ }
+ pm8001_dbg(pm8001_ha, IO, "scsi_status = %x\n",
+ psspPayload->ssp_resp_iu.status);
+ spin_lock_irqsave(&t->task_state_lock, flags);
+ t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ t->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_dbg(pm8001_ha, FAIL, "task 0x%p done with io_status 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
+ t, status, ts->resp, ts->stat);
+ pm8001_ccb_task_free(pm8001_ha, ccb);
+ } else {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_ccb_task_free(pm8001_ha, ccb);
+ mb();/* in order to force CPU ordering */
+ t->task_done(t);
+ }
+}
+
+/*See the comments for mpi_ssp_completion */
+static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct sas_task *t;
+ unsigned long flags;
+ struct task_status_struct *ts;
+ struct pm8001_ccb_info *ccb;
+ struct pm8001_device *pm8001_dev;
+ struct ssp_event_resp *psspPayload =
+ (struct ssp_event_resp *)(piomb + 4);
+ u32 event = le32_to_cpu(psspPayload->event);
+ u32 tag = le32_to_cpu(psspPayload->tag);
+ u32 port_id = le32_to_cpu(psspPayload->port_id);
+ u32 dev_id = le32_to_cpu(psspPayload->device_id);
+
+ ccb = &pm8001_ha->ccb_info[tag];
+ t = ccb->task;
+ pm8001_dev = ccb->device;
+ if (event)
+ pm8001_dbg(pm8001_ha, FAIL, "sas IO status 0x%x\n", event);
+ if (unlikely(!t || !t->lldd_task || !t->dev))
+ return;
+ ts = &t->task_status;
+ pm8001_dbg(pm8001_ha, DEVIO, "port_id = %x,device_id = %x\n",
+ port_id, dev_id);
+ switch (event) {
+ case IO_OVERFLOW:
+ pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ ts->residual = 0;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_XFER_ERROR_BREAK:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
+ pm8001_handle_event(pm8001_ha, t, IO_XFER_ERROR_BREAK);
+ return;
+ case IO_XFER_ERROR_PHY_NOT_READY:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_EPROTO;
+ break;
+ case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ break;
+ case IO_OPEN_CNX_ERROR_BREAK:
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ if (!t->uldd_task)
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+ break;
+ case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+ break;
+ case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+ break;
+ case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+ break;
+ case IO_XFER_ERROR_NAK_RECEIVED:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_NAK_RECEIVED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_ACK_NAK_TIMEOUT\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_NAK_R_ERR;
+ break;
+ case IO_XFER_OPEN_RETRY_TIMEOUT:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
+ pm8001_handle_event(pm8001_ha, t, IO_XFER_OPEN_RETRY_TIMEOUT);
+ return;
+ case IO_XFER_ERROR_UNEXPECTED_PHASE:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_UNEXPECTED_PHASE\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_ERROR_XFER_RDY_OVERRUN:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_XFER_RDY_OVERRUN\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_ERROR_OFFSET_MISMATCH:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_OFFSET_MISMATCH\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_ERROR_XFER_ZERO_DATA_LEN:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_CMD_FRAME_ISSUED:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_CMD_FRAME_ISSUED\n");
+ return;
+ default:
+ pm8001_dbg(pm8001_ha, DEVIO, "Unknown status 0x%x\n", event);
+ /* not allowed case. Therefore, return failed status */
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ }
+ spin_lock_irqsave(&t->task_state_lock, flags);
+ t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ t->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_dbg(pm8001_ha, FAIL, "task 0x%p done with event 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
+ t, event, ts->resp, ts->stat);
+ pm8001_ccb_task_free(pm8001_ha, ccb);
+ } else {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_ccb_task_free(pm8001_ha, ccb);
+ mb();/* in order to force CPU ordering */
+ t->task_done(t);
+ }
+}
+
+/*See the comments for mpi_ssp_completion */
+static void
+mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct sas_task *t;
+ struct pm8001_ccb_info *ccb;
+ u32 param;
+ u32 status;
+ u32 tag;
+ int i, j;
+ u8 sata_addr_low[4];
+ u32 temp_sata_addr_low;
+ u8 sata_addr_hi[4];
+ u32 temp_sata_addr_hi;
+ struct sata_completion_resp *psataPayload;
+ struct task_status_struct *ts;
+ struct ata_task_resp *resp ;
+ u32 *sata_resp;
+ struct pm8001_device *pm8001_dev;
+ unsigned long flags;
+
+ psataPayload = (struct sata_completion_resp *)(piomb + 4);
+ status = le32_to_cpu(psataPayload->status);
+ param = le32_to_cpu(psataPayload->param);
+ tag = le32_to_cpu(psataPayload->tag);
+
+ ccb = &pm8001_ha->ccb_info[tag];
+ t = ccb->task;
+ pm8001_dev = ccb->device;
+
+ if (t) {
+ if (t->dev && (t->dev->lldd_dev))
+ pm8001_dev = t->dev->lldd_dev;
+ } else {
+ pm8001_dbg(pm8001_ha, FAIL, "task null, freeing CCB tag %d\n",
+ ccb->ccb_tag);
+ pm8001_ccb_free(pm8001_ha, ccb);
+ return;
+ }
+
+ if (pm8001_dev && unlikely(!t || !t->lldd_task || !t->dev)) {
+ pm8001_dbg(pm8001_ha, FAIL, "task or dev null\n");
+ return;
+ }
+
+ ts = &t->task_status;
+
+ if (status)
+ pm8001_dbg(pm8001_ha, IOERR,
+ "status:0x%x, tag:0x%x, task::0x%p\n",
+ status, tag, t);
+
+ /* Print sas address of IO failed device */
+ if ((status != IO_SUCCESS) && (status != IO_OVERFLOW) &&
+ (status != IO_UNDERFLOW)) {
+ if (!((t->dev->parent) &&
+ (dev_is_expander(t->dev->parent->dev_type)))) {
+ for (i = 0, j = 4; j <= 7 && i <= 3; i++, j++)
+ sata_addr_low[i] = pm8001_ha->sas_addr[j];
+ for (i = 0, j = 0; j <= 3 && i <= 3; i++, j++)
+ sata_addr_hi[i] = pm8001_ha->sas_addr[j];
+ memcpy(&temp_sata_addr_low, sata_addr_low,
+ sizeof(sata_addr_low));
+ memcpy(&temp_sata_addr_hi, sata_addr_hi,
+ sizeof(sata_addr_hi));
+ temp_sata_addr_hi = (((temp_sata_addr_hi >> 24) & 0xff)
+ |((temp_sata_addr_hi << 8) &
+ 0xff0000) |
+ ((temp_sata_addr_hi >> 8)
+ & 0xff00) |
+ ((temp_sata_addr_hi << 24) &
+ 0xff000000));
+ temp_sata_addr_low = ((((temp_sata_addr_low >> 24)
+ & 0xff) |
+ ((temp_sata_addr_low << 8)
+ & 0xff0000) |
+ ((temp_sata_addr_low >> 8)
+ & 0xff00) |
+ ((temp_sata_addr_low << 24)
+ & 0xff000000)) +
+ pm8001_dev->attached_phy +
+ 0x10);
+ pm8001_dbg(pm8001_ha, FAIL,
+ "SAS Address of IO Failure Drive:%08x%08x\n",
+ temp_sata_addr_hi,
+ temp_sata_addr_low);
+ } else {
+ pm8001_dbg(pm8001_ha, FAIL,
+ "SAS Address of IO Failure Drive:%016llx\n",
+ SAS_ADDR(t->dev->sas_addr));
+ }
+ }
+ switch (status) {
+ case IO_SUCCESS:
+ pm8001_dbg(pm8001_ha, IO, "IO_SUCCESS\n");
+ if (param == 0) {
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_SAM_STAT_GOOD;
+ } else {
+ u8 len;
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_PROTO_RESPONSE;
+ ts->residual = param;
+ pm8001_dbg(pm8001_ha, IO,
+ "SAS_PROTO_RESPONSE len = %d\n",
+ param);
+ sata_resp = &psataPayload->sata_resp[0];
+ resp = (struct ata_task_resp *)ts->buf;
+ if (t->ata_task.dma_xfer == 0 &&
+ t->data_dir == DMA_FROM_DEVICE) {
+ len = sizeof(struct pio_setup_fis);
+ pm8001_dbg(pm8001_ha, IO,
+ "PIO read len = %d\n", len);
+ } else if (t->ata_task.use_ncq &&
+ t->data_dir != DMA_NONE) {
+ len = sizeof(struct set_dev_bits_fis);
+ pm8001_dbg(pm8001_ha, IO, "FPDMA len = %d\n",
+ len);
+ } else {
+ len = sizeof(struct dev_to_host_fis);
+ pm8001_dbg(pm8001_ha, IO, "other len = %d\n",
+ len);
+ }
+ if (SAS_STATUS_BUF_SIZE >= sizeof(*resp)) {
+ resp->frame_len = len;
+ memcpy(&resp->ending_fis[0], sata_resp, len);
+ ts->buf_valid_size = sizeof(*resp);
+ } else
+ pm8001_dbg(pm8001_ha, IO,
+ "response too large\n");
+ }
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_ABORTED:
+ pm8001_dbg(pm8001_ha, IO, "IO_ABORTED IOMB Tag\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_ABORTED_TASK;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ /* following cases are to do cases */
+ case IO_UNDERFLOW:
+ /* SATA Completion with error */
+ pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW param = %d\n", param);
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_UNDERRUN;
+ ts->residual = param;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_NO_DEVICE:
+ pm8001_dbg(pm8001_ha, IO, "IO_NO_DEVICE\n");
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_PHY_DOWN;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_XFER_ERROR_BREAK:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_INTERRUPTED;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_XFER_ERROR_PHY_NOT_READY:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_EPROTO;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_OPEN_CNX_ERROR_BREAK:
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (!t->uldd_task) {
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_QUEUE_FULL;
+ pm8001_ccb_task_free_done(pm8001_ha, ccb);
+ return;
+ }
+ break;
+ case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n");
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+ if (!t->uldd_task) {
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_QUEUE_FULL;
+ pm8001_ccb_task_free_done(pm8001_ha, ccb);
+ return;
+ }
+ break;
+ case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY:
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (!t->uldd_task) {
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY);
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_QUEUE_FULL;
+ pm8001_ccb_task_free_done(pm8001_ha, ccb);
+ return;
+ }
+ break;
+ case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_XFER_ERROR_NAK_RECEIVED:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_NAK_RECEIVED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_NAK_R_ERR;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_ACK_NAK_TIMEOUT\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_NAK_R_ERR;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_XFER_ERROR_DMA:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_DMA\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_ABORTED_TASK;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_XFER_ERROR_SATA_LINK_TIMEOUT:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_SATA_LINK_TIMEOUT\n");
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_XFER_ERROR_REJECTED_NCQ_MODE:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_REJECTED_NCQ_MODE\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_UNDERRUN;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_XFER_OPEN_RETRY_TIMEOUT:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_PORT_IN_RESET:
+ pm8001_dbg(pm8001_ha, IO, "IO_PORT_IN_RESET\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_DS_NON_OPERATIONAL:
+ pm8001_dbg(pm8001_ha, IO, "IO_DS_NON_OPERATIONAL\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (!t->uldd_task) {
+ pm8001_handle_event(pm8001_ha, pm8001_dev,
+ IO_DS_NON_OPERATIONAL);
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_QUEUE_FULL;
+ pm8001_ccb_task_free_done(pm8001_ha, ccb);
+ return;
+ }
+ break;
+ case IO_DS_IN_RECOVERY:
+ pm8001_dbg(pm8001_ha, IO, " IO_DS_IN_RECOVERY\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_DS_IN_ERROR:
+ pm8001_dbg(pm8001_ha, IO, "IO_DS_IN_ERROR\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (!t->uldd_task) {
+ pm8001_handle_event(pm8001_ha, pm8001_dev,
+ IO_DS_IN_ERROR);
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_QUEUE_FULL;
+ pm8001_ccb_task_free_done(pm8001_ha, ccb);
+ return;
+ }
+ break;
+ case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ default:
+ pm8001_dbg(pm8001_ha, DEVIO, "Unknown status 0x%x\n", status);
+ /* not allowed case. Therefore, return failed status */
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ }
+ spin_lock_irqsave(&t->task_state_lock, flags);
+ t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ t->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_dbg(pm8001_ha, FAIL,
+ "task 0x%p done with io_status 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
+ t, status, ts->resp, ts->stat);
+ pm8001_ccb_task_free(pm8001_ha, ccb);
+ } else {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_ccb_task_free_done(pm8001_ha, ccb);
+ }
+}
+
+/*See the comments for mpi_ssp_completion */
+static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct sas_task *t;
+ struct task_status_struct *ts;
+ struct pm8001_ccb_info *ccb;
+ struct pm8001_device *pm8001_dev;
+ struct sata_event_resp *psataPayload =
+ (struct sata_event_resp *)(piomb + 4);
+ u32 event = le32_to_cpu(psataPayload->event);
+ u32 tag = le32_to_cpu(psataPayload->tag);
+ u32 port_id = le32_to_cpu(psataPayload->port_id);
+ u32 dev_id = le32_to_cpu(psataPayload->device_id);
+
+ if (event)
+ pm8001_dbg(pm8001_ha, FAIL, "SATA EVENT 0x%x\n", event);
+
+ /* Check if this is NCQ error */
+ if (event == IO_XFER_ERROR_ABORTED_NCQ_MODE) {
+ /* find device using device id */
+ pm8001_dev = pm8001_find_dev(pm8001_ha, dev_id);
+ if (pm8001_dev)
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_XFER_ERROR_ABORTED_NCQ_MODE);
+ return;
+ }
+
+ ccb = &pm8001_ha->ccb_info[tag];
+ t = ccb->task;
+ pm8001_dev = ccb->device;
+ if (event)
+ pm8001_dbg(pm8001_ha, FAIL, "sata IO status 0x%x\n", event);
+
+ if (unlikely(!t)) {
+ pm8001_dbg(pm8001_ha, FAIL, "task null, freeing CCB tag %d\n",
+ ccb->ccb_tag);
+ pm8001_ccb_free(pm8001_ha, ccb);
+ return;
+ }
+
+ if (unlikely(!t->lldd_task || !t->dev))
+ return;
+
+ ts = &t->task_status;
+ pm8001_dbg(pm8001_ha, DEVIO,
+ "port_id:0x%x, device_id:0x%x, tag:0x%x, event:0x%x\n",
+ port_id, dev_id, tag, event);
+ switch (event) {
+ case IO_OVERFLOW:
+ pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ ts->residual = 0;
+ break;
+ case IO_XFER_ERROR_BREAK:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_INTERRUPTED;
+ break;
+ case IO_XFER_ERROR_PHY_NOT_READY:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_EPROTO;
+ break;
+ case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ break;
+ case IO_OPEN_CNX_ERROR_BREAK:
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
+ break;
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n");
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (!t->uldd_task) {
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_QUEUE_FULL;
+ return;
+ }
+ break;
+ case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n");
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+ break;
+ case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+ break;
+ case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+ break;
+ case IO_XFER_ERROR_NAK_RECEIVED:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_NAK_RECEIVED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_NAK_R_ERR;
+ break;
+ case IO_XFER_ERROR_PEER_ABORTED:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PEER_ABORTED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_NAK_R_ERR;
+ break;
+ case IO_XFER_ERROR_REJECTED_NCQ_MODE:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_REJECTED_NCQ_MODE\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_UNDERRUN;
+ break;
+ case IO_XFER_OPEN_RETRY_TIMEOUT:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_ERROR_UNEXPECTED_PHASE:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_UNEXPECTED_PHASE\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_ERROR_XFER_RDY_OVERRUN:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_XFER_RDY_OVERRUN\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_ERROR_OFFSET_MISMATCH:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_OFFSET_MISMATCH\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_ERROR_XFER_ZERO_DATA_LEN:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_CMD_FRAME_ISSUED:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_CMD_FRAME_ISSUED\n");
+ break;
+ case IO_XFER_PIO_SETUP_ERROR:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_PIO_SETUP_ERROR\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ default:
+ pm8001_dbg(pm8001_ha, DEVIO, "Unknown status 0x%x\n", event);
+ /* not allowed case. Therefore, return failed status */
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ }
+}
+
+/*See the comments for mpi_ssp_completion */
+static void
+mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct sas_task *t;
+ struct pm8001_ccb_info *ccb;
+ unsigned long flags;
+ u32 status;
+ u32 tag;
+ struct smp_completion_resp *psmpPayload;
+ struct task_status_struct *ts;
+ struct pm8001_device *pm8001_dev;
+
+ psmpPayload = (struct smp_completion_resp *)(piomb + 4);
+ status = le32_to_cpu(psmpPayload->status);
+ tag = le32_to_cpu(psmpPayload->tag);
+
+ ccb = &pm8001_ha->ccb_info[tag];
+ t = ccb->task;
+ ts = &t->task_status;
+ pm8001_dev = ccb->device;
+ if (status) {
+ pm8001_dbg(pm8001_ha, FAIL, "smp IO status 0x%x\n", status);
+ pm8001_dbg(pm8001_ha, IOERR,
+ "status:0x%x, tag:0x%x, task:0x%p\n",
+ status, tag, t);
+ }
+ if (unlikely(!t || !t->lldd_task || !t->dev))
+ return;
+
+ switch (status) {
+ case IO_SUCCESS:
+ pm8001_dbg(pm8001_ha, IO, "IO_SUCCESS\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_SAM_STAT_GOOD;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_ABORTED:
+ pm8001_dbg(pm8001_ha, IO, "IO_ABORTED IOMB\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_ABORTED_TASK;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_OVERFLOW:
+ pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ ts->residual = 0;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_NO_DEVICE:
+ pm8001_dbg(pm8001_ha, IO, "IO_NO_DEVICE\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_PHY_DOWN;
+ break;
+ case IO_ERROR_HW_TIMEOUT:
+ pm8001_dbg(pm8001_ha, IO, "IO_ERROR_HW_TIMEOUT\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_SAM_STAT_BUSY;
+ break;
+ case IO_XFER_ERROR_BREAK:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_SAM_STAT_BUSY;
+ break;
+ case IO_XFER_ERROR_PHY_NOT_READY:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_SAM_STAT_BUSY;
+ break;
+ case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ break;
+ case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ break;
+ case IO_OPEN_CNX_ERROR_BREAK:
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
+ break;
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+ break;
+ case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+ break;
+ case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+ break;
+ case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+ break;
+ case IO_XFER_ERROR_RX_FRAME:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_RX_FRAME\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ break;
+ case IO_XFER_OPEN_RETRY_TIMEOUT:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_ERROR_INTERNAL_SMP_RESOURCE:
+ pm8001_dbg(pm8001_ha, IO, "IO_ERROR_INTERNAL_SMP_RESOURCE\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_QUEUE_FULL;
+ break;
+ case IO_PORT_IN_RESET:
+ pm8001_dbg(pm8001_ha, IO, "IO_PORT_IN_RESET\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_DS_NON_OPERATIONAL:
+ pm8001_dbg(pm8001_ha, IO, "IO_DS_NON_OPERATIONAL\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ break;
+ case IO_DS_IN_RECOVERY:
+ pm8001_dbg(pm8001_ha, IO, "IO_DS_IN_RECOVERY\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ default:
+ pm8001_dbg(pm8001_ha, DEVIO, "Unknown status 0x%x\n", status);
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ /* not allowed case. Therefore, return failed status */
+ break;
+ }
+ spin_lock_irqsave(&t->task_state_lock, flags);
+ t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ t->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_dbg(pm8001_ha, FAIL, "task 0x%p done with io_status 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
+ t, status, ts->resp, ts->stat);
+ pm8001_ccb_task_free(pm8001_ha, ccb);
+ } else {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_ccb_task_free_done(pm8001_ha, ccb);
+ }
+}
+
+void pm8001_mpi_set_dev_state_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb)
+{
+ struct set_dev_state_resp *pPayload =
+ (struct set_dev_state_resp *)(piomb + 4);
+ u32 tag = le32_to_cpu(pPayload->tag);
+ struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[tag];
+ struct pm8001_device *pm8001_dev = ccb->device;
+ u32 status = le32_to_cpu(pPayload->status);
+ u32 device_id = le32_to_cpu(pPayload->device_id);
+ u8 pds = le32_to_cpu(pPayload->pds_nds) & PDS_BITS;
+ u8 nds = le32_to_cpu(pPayload->pds_nds) & NDS_BITS;
+
+ pm8001_dbg(pm8001_ha, MSG,
+ "Set device id = 0x%x state from 0x%x to 0x%x status = 0x%x!\n",
+ device_id, pds, nds, status);
+ complete(pm8001_dev->setds_completion);
+ pm8001_ccb_free(pm8001_ha, ccb);
+}
+
+void pm8001_mpi_set_nvmd_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct get_nvm_data_resp *pPayload =
+ (struct get_nvm_data_resp *)(piomb + 4);
+ u32 tag = le32_to_cpu(pPayload->tag);
+ struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[tag];
+ u32 dlen_status = le32_to_cpu(pPayload->dlen_status);
+
+ complete(pm8001_ha->nvmd_completion);
+ pm8001_dbg(pm8001_ha, MSG, "Set nvm data complete!\n");
+ if ((dlen_status & NVMD_STAT) != 0) {
+ pm8001_dbg(pm8001_ha, FAIL, "Set nvm data error %x\n",
+ dlen_status);
+ }
+ pm8001_ccb_free(pm8001_ha, ccb);
+}
+
+void
+pm8001_mpi_get_nvmd_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct fw_control_ex *fw_control_context;
+ struct get_nvm_data_resp *pPayload =
+ (struct get_nvm_data_resp *)(piomb + 4);
+ u32 tag = le32_to_cpu(pPayload->tag);
+ struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[tag];
+ u32 dlen_status = le32_to_cpu(pPayload->dlen_status);
+ u32 ir_tds_bn_dps_das_nvm =
+ le32_to_cpu(pPayload->ir_tda_bn_dps_das_nvm);
+ void *virt_addr = pm8001_ha->memoryMap.region[NVMD].virt_ptr;
+ fw_control_context = ccb->fw_control_context;
+
+ pm8001_dbg(pm8001_ha, MSG, "Get nvm data complete!\n");
+ if ((dlen_status & NVMD_STAT) != 0) {
+ pm8001_dbg(pm8001_ha, FAIL, "Get nvm data error %x\n",
+ dlen_status);
+ complete(pm8001_ha->nvmd_completion);
+ /* We should free tag during failure also, the tag is not being
+ * freed by requesting path anywhere.
+ */
+ pm8001_ccb_free(pm8001_ha, ccb);
+ return;
+ }
+ if (ir_tds_bn_dps_das_nvm & IPMode) {
+ /* indirect mode - IR bit set */
+ pm8001_dbg(pm8001_ha, MSG, "Get NVMD success, IR=1\n");
+ if ((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == TWI_DEVICE) {
+ if (ir_tds_bn_dps_das_nvm == 0x80a80200) {
+ memcpy(pm8001_ha->sas_addr,
+ ((u8 *)virt_addr + 4),
+ SAS_ADDR_SIZE);
+ pm8001_dbg(pm8001_ha, MSG, "Get SAS address from VPD successfully!\n");
+ }
+ } else if (((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == C_SEEPROM)
+ || ((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == VPD_FLASH) ||
+ ((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == EXPAN_ROM)) {
+ ;
+ } else if (((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == AAP1_RDUMP)
+ || ((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == IOP_RDUMP)) {
+ ;
+ } else {
+ /* Should not be happened*/
+ pm8001_dbg(pm8001_ha, MSG,
+ "(IR=1)Wrong Device type 0x%x\n",
+ ir_tds_bn_dps_das_nvm);
+ }
+ } else /* direct mode */{
+ pm8001_dbg(pm8001_ha, MSG,
+ "Get NVMD success, IR=0, dataLen=%d\n",
+ (dlen_status & NVMD_LEN) >> 24);
+ }
+ /* Though fw_control_context is freed below, usrAddr still needs
+ * to be updated as this holds the response to the request function
+ */
+ memcpy(fw_control_context->usrAddr,
+ pm8001_ha->memoryMap.region[NVMD].virt_ptr,
+ fw_control_context->len);
+ kfree(ccb->fw_control_context);
+ /* To avoid race condition, complete should be
+ * called after the message is copied to
+ * fw_control_context->usrAddr
+ */
+ complete(pm8001_ha->nvmd_completion);
+ pm8001_dbg(pm8001_ha, MSG, "Get nvmd data complete!\n");
+ pm8001_ccb_free(pm8001_ha, ccb);
+}
+
+int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ u32 tag;
+ struct local_phy_ctl_resp *pPayload =
+ (struct local_phy_ctl_resp *)(piomb + 4);
+ u32 status = le32_to_cpu(pPayload->status);
+ u32 phy_id = le32_to_cpu(pPayload->phyop_phyid) & ID_BITS;
+ u32 phy_op = le32_to_cpu(pPayload->phyop_phyid) & OP_BITS;
+ tag = le32_to_cpu(pPayload->tag);
+ if (status != 0) {
+ pm8001_dbg(pm8001_ha, MSG,
+ "%x phy execute %x phy op failed!\n",
+ phy_id, phy_op);
+ } else {
+ pm8001_dbg(pm8001_ha, MSG,
+ "%x phy execute %x phy op success!\n",
+ phy_id, phy_op);
+ pm8001_ha->phy[phy_id].reset_success = true;
+ }
+ if (pm8001_ha->phy[phy_id].enable_completion) {
+ complete(pm8001_ha->phy[phy_id].enable_completion);
+ pm8001_ha->phy[phy_id].enable_completion = NULL;
+ }
+ pm8001_tag_free(pm8001_ha, tag);
+ return 0;
+}
+
+/**
+ * pm8001_bytes_dmaed - one of the interface function communication with libsas
+ * @pm8001_ha: our hba card information
+ * @i: which phy that received the event.
+ *
+ * when HBA driver received the identify done event or initiate FIS received
+ * event(for SATA), it will invoke this function to notify the sas layer that
+ * the sas toplogy has formed, please discover the whole sas domain,
+ * while receive a broadcast(change) primitive just tell the sas
+ * layer to discover the changed domain rather than the whole domain.
+ */
+void pm8001_bytes_dmaed(struct pm8001_hba_info *pm8001_ha, int i)
+{
+ struct pm8001_phy *phy = &pm8001_ha->phy[i];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ if (!phy->phy_attached)
+ return;
+
+ if (phy->phy_type & PORT_TYPE_SAS) {
+ struct sas_identify_frame *id;
+ id = (struct sas_identify_frame *)phy->frame_rcvd;
+ id->dev_type = phy->identify.device_type;
+ id->initiator_bits = SAS_PROTOCOL_ALL;
+ id->target_bits = phy->identify.target_port_protocols;
+ } else if (phy->phy_type & PORT_TYPE_SATA) {
+ /*Nothing*/
+ }
+ pm8001_dbg(pm8001_ha, MSG, "phy %d byte dmaded.\n", i);
+
+ sas_phy->frame_rcvd_size = phy->frame_rcvd_size;
+ sas_notify_port_event(sas_phy, PORTE_BYTES_DMAED, GFP_ATOMIC);
+}
+
+/* Get the link rate speed */
+void pm8001_get_lrate_mode(struct pm8001_phy *phy, u8 link_rate)
+{
+ struct sas_phy *sas_phy = phy->sas_phy.phy;
+
+ switch (link_rate) {
+ case PHY_SPEED_120:
+ phy->sas_phy.linkrate = SAS_LINK_RATE_12_0_GBPS;
+ break;
+ case PHY_SPEED_60:
+ phy->sas_phy.linkrate = SAS_LINK_RATE_6_0_GBPS;
+ break;
+ case PHY_SPEED_30:
+ phy->sas_phy.linkrate = SAS_LINK_RATE_3_0_GBPS;
+ break;
+ case PHY_SPEED_15:
+ phy->sas_phy.linkrate = SAS_LINK_RATE_1_5_GBPS;
+ break;
+ }
+ sas_phy->negotiated_linkrate = phy->sas_phy.linkrate;
+ sas_phy->maximum_linkrate_hw = phy->maximum_linkrate;
+ sas_phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
+ sas_phy->maximum_linkrate = phy->maximum_linkrate;
+ sas_phy->minimum_linkrate = phy->minimum_linkrate;
+}
+
+/**
+ * pm8001_get_attached_sas_addr - extract/generate attached SAS address
+ * @phy: pointer to asd_phy
+ * @sas_addr: pointer to buffer where the SAS address is to be written
+ *
+ * This function extracts the SAS address from an IDENTIFY frame
+ * received. If OOB is SATA, then a SAS address is generated from the
+ * HA tables.
+ *
+ * LOCKING: the frame_rcvd_lock needs to be held since this parses the frame
+ * buffer.
+ */
+void pm8001_get_attached_sas_addr(struct pm8001_phy *phy,
+ u8 *sas_addr)
+{
+ if (phy->sas_phy.frame_rcvd[0] == 0x34
+ && phy->sas_phy.oob_mode == SATA_OOB_MODE) {
+ struct pm8001_hba_info *pm8001_ha = phy->sas_phy.ha->lldd_ha;
+ /* FIS device-to-host */
+ u64 addr = be64_to_cpu(*(__be64 *)pm8001_ha->sas_addr);
+ addr += phy->sas_phy.id;
+ *(__be64 *)sas_addr = cpu_to_be64(addr);
+ } else {
+ struct sas_identify_frame *idframe =
+ (void *) phy->sas_phy.frame_rcvd;
+ memcpy(sas_addr, idframe->sas_addr, SAS_ADDR_SIZE);
+ }
+}
+
+/**
+ * pm8001_hw_event_ack_req- For PM8001,some events need to acknowage to FW.
+ * @pm8001_ha: our hba card information
+ * @Qnum: the outbound queue message number.
+ * @SEA: source of event to ack
+ * @port_id: port id.
+ * @phyId: phy id.
+ * @param0: parameter 0.
+ * @param1: parameter 1.
+ */
+static void pm8001_hw_event_ack_req(struct pm8001_hba_info *pm8001_ha,
+ u32 Qnum, u32 SEA, u32 port_id, u32 phyId, u32 param0, u32 param1)
+{
+ struct hw_event_ack_req payload;
+ u32 opc = OPC_INB_SAS_HW_EVENT_ACK;
+
+ memset((u8 *)&payload, 0, sizeof(payload));
+ payload.tag = cpu_to_le32(1);
+ payload.sea_phyid_portid = cpu_to_le32(((SEA & 0xFFFF) << 8) |
+ ((phyId & 0x0F) << 4) | (port_id & 0x0F));
+ payload.param0 = cpu_to_le32(param0);
+ payload.param1 = cpu_to_le32(param1);
+
+ pm8001_mpi_build_cmd(pm8001_ha, Qnum, opc, &payload, sizeof(payload), 0);
+}
+
+static int pm8001_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha,
+ u32 phyId, u32 phy_op);
+
+/**
+ * hw_event_sas_phy_up -FW tells me a SAS phy up event.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static void
+hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct hw_event_resp *pPayload =
+ (struct hw_event_resp *)(piomb + 4);
+ u32 lr_evt_status_phyid_portid =
+ le32_to_cpu(pPayload->lr_evt_status_phyid_portid);
+ u8 link_rate =
+ (u8)((lr_evt_status_phyid_portid & 0xF0000000) >> 28);
+ u8 port_id = (u8)(lr_evt_status_phyid_portid & 0x0000000F);
+ u8 phy_id =
+ (u8)((lr_evt_status_phyid_portid & 0x000000F0) >> 4);
+ u32 npip_portstate = le32_to_cpu(pPayload->npip_portstate);
+ u8 portstate = (u8)(npip_portstate & 0x0000000F);
+ struct pm8001_port *port = &pm8001_ha->port[port_id];
+ struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+ unsigned long flags;
+ u8 deviceType = pPayload->sas_identify.dev_type;
+ phy->port = port;
+ port->port_id = port_id;
+ port->port_state = portstate;
+ phy->phy_state = PHY_STATE_LINK_UP_SPC;
+ pm8001_dbg(pm8001_ha, MSG,
+ "HW_EVENT_SAS_PHY_UP port id = %d, phy id = %d\n",
+ port_id, phy_id);
+
+ switch (deviceType) {
+ case SAS_PHY_UNUSED:
+ pm8001_dbg(pm8001_ha, MSG, "device type no device.\n");
+ break;
+ case SAS_END_DEVICE:
+ pm8001_dbg(pm8001_ha, MSG, "end device.\n");
+ pm8001_chip_phy_ctl_req(pm8001_ha, phy_id,
+ PHY_NOTIFY_ENABLE_SPINUP);
+ port->port_attached = 1;
+ pm8001_get_lrate_mode(phy, link_rate);
+ break;
+ case SAS_EDGE_EXPANDER_DEVICE:
+ pm8001_dbg(pm8001_ha, MSG, "expander device.\n");
+ port->port_attached = 1;
+ pm8001_get_lrate_mode(phy, link_rate);
+ break;
+ case SAS_FANOUT_EXPANDER_DEVICE:
+ pm8001_dbg(pm8001_ha, MSG, "fanout expander device.\n");
+ port->port_attached = 1;
+ pm8001_get_lrate_mode(phy, link_rate);
+ break;
+ default:
+ pm8001_dbg(pm8001_ha, DEVIO, "unknown device type(%x)\n",
+ deviceType);
+ break;
+ }
+ phy->phy_type |= PORT_TYPE_SAS;
+ phy->identify.device_type = deviceType;
+ phy->phy_attached = 1;
+ if (phy->identify.device_type == SAS_END_DEVICE)
+ phy->identify.target_port_protocols = SAS_PROTOCOL_SSP;
+ else if (phy->identify.device_type != SAS_PHY_UNUSED)
+ phy->identify.target_port_protocols = SAS_PROTOCOL_SMP;
+ phy->sas_phy.oob_mode = SAS_OOB_MODE;
+ sas_notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE, GFP_ATOMIC);
+ spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags);
+ memcpy(phy->frame_rcvd, &pPayload->sas_identify,
+ sizeof(struct sas_identify_frame)-4);
+ phy->frame_rcvd_size = sizeof(struct sas_identify_frame) - 4;
+ pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
+ spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
+ if (pm8001_ha->flags == PM8001F_RUN_TIME)
+ mdelay(200);/*delay a moment to wait disk to spinup*/
+ pm8001_bytes_dmaed(pm8001_ha, phy_id);
+}
+
+/**
+ * hw_event_sata_phy_up -FW tells me a SATA phy up event.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static void
+hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct hw_event_resp *pPayload =
+ (struct hw_event_resp *)(piomb + 4);
+ u32 lr_evt_status_phyid_portid =
+ le32_to_cpu(pPayload->lr_evt_status_phyid_portid);
+ u8 link_rate =
+ (u8)((lr_evt_status_phyid_portid & 0xF0000000) >> 28);
+ u8 port_id = (u8)(lr_evt_status_phyid_portid & 0x0000000F);
+ u8 phy_id =
+ (u8)((lr_evt_status_phyid_portid & 0x000000F0) >> 4);
+ u32 npip_portstate = le32_to_cpu(pPayload->npip_portstate);
+ u8 portstate = (u8)(npip_portstate & 0x0000000F);
+ struct pm8001_port *port = &pm8001_ha->port[port_id];
+ struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+ unsigned long flags;
+ pm8001_dbg(pm8001_ha, DEVIO, "HW_EVENT_SATA_PHY_UP port id = %d, phy id = %d\n",
+ port_id, phy_id);
+ phy->port = port;
+ port->port_id = port_id;
+ port->port_state = portstate;
+ phy->phy_state = PHY_STATE_LINK_UP_SPC;
+ port->port_attached = 1;
+ pm8001_get_lrate_mode(phy, link_rate);
+ phy->phy_type |= PORT_TYPE_SATA;
+ phy->phy_attached = 1;
+ phy->sas_phy.oob_mode = SATA_OOB_MODE;
+ sas_notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE, GFP_ATOMIC);
+ spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags);
+ memcpy(phy->frame_rcvd, ((u8 *)&pPayload->sata_fis - 4),
+ sizeof(struct dev_to_host_fis));
+ phy->frame_rcvd_size = sizeof(struct dev_to_host_fis);
+ phy->identify.target_port_protocols = SAS_PROTOCOL_SATA;
+ phy->identify.device_type = SAS_SATA_DEV;
+ pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
+ spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
+ pm8001_bytes_dmaed(pm8001_ha, phy_id);
+}
+
+/**
+ * hw_event_phy_down -we should notify the libsas the phy is down.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static void
+hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct hw_event_resp *pPayload =
+ (struct hw_event_resp *)(piomb + 4);
+ u32 lr_evt_status_phyid_portid =
+ le32_to_cpu(pPayload->lr_evt_status_phyid_portid);
+ u8 port_id = (u8)(lr_evt_status_phyid_portid & 0x0000000F);
+ u8 phy_id =
+ (u8)((lr_evt_status_phyid_portid & 0x000000F0) >> 4);
+ u32 npip_portstate = le32_to_cpu(pPayload->npip_portstate);
+ u8 portstate = (u8)(npip_portstate & 0x0000000F);
+ struct pm8001_port *port = &pm8001_ha->port[port_id];
+ struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+ port->port_state = portstate;
+ phy->phy_type = 0;
+ phy->identify.device_type = 0;
+ phy->phy_attached = 0;
+ memset(&phy->dev_sas_addr, 0, SAS_ADDR_SIZE);
+ switch (portstate) {
+ case PORT_VALID:
+ break;
+ case PORT_INVALID:
+ pm8001_dbg(pm8001_ha, MSG, " PortInvalid portID %d\n",
+ port_id);
+ pm8001_dbg(pm8001_ha, MSG,
+ " Last phy Down and port invalid\n");
+ port->port_attached = 0;
+ pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
+ port_id, phy_id, 0, 0);
+ break;
+ case PORT_IN_RESET:
+ pm8001_dbg(pm8001_ha, MSG, " Port In Reset portID %d\n",
+ port_id);
+ break;
+ case PORT_NOT_ESTABLISHED:
+ pm8001_dbg(pm8001_ha, MSG,
+ " phy Down and PORT_NOT_ESTABLISHED\n");
+ port->port_attached = 0;
+ break;
+ case PORT_LOSTCOMM:
+ pm8001_dbg(pm8001_ha, MSG, " phy Down and PORT_LOSTCOMM\n");
+ pm8001_dbg(pm8001_ha, MSG,
+ " Last phy Down and port invalid\n");
+ port->port_attached = 0;
+ pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
+ port_id, phy_id, 0, 0);
+ break;
+ default:
+ port->port_attached = 0;
+ pm8001_dbg(pm8001_ha, DEVIO, " phy Down and(default) = %x\n",
+ portstate);
+ break;
+
+ }
+}
+
+/**
+ * pm8001_mpi_reg_resp -process register device ID response.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ *
+ * when sas layer find a device it will notify LLDD, then the driver register
+ * the domain device to FW, this event is the return device ID which the FW
+ * has assigned, from now, inter-communication with FW is no longer using the
+ * SAS address, use device ID which FW assigned.
+ */
+int pm8001_mpi_reg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ u32 status;
+ u32 device_id;
+ u32 htag;
+ struct pm8001_ccb_info *ccb;
+ struct pm8001_device *pm8001_dev;
+ struct dev_reg_resp *registerRespPayload =
+ (struct dev_reg_resp *)(piomb + 4);
+
+ htag = le32_to_cpu(registerRespPayload->tag);
+ ccb = &pm8001_ha->ccb_info[htag];
+ pm8001_dev = ccb->device;
+ status = le32_to_cpu(registerRespPayload->status);
+ device_id = le32_to_cpu(registerRespPayload->device_id);
+ pm8001_dbg(pm8001_ha, INIT,
+ "register device status %d phy_id 0x%x device_id %d\n",
+ status, pm8001_dev->attached_phy, device_id);
+ switch (status) {
+ case DEVREG_SUCCESS:
+ pm8001_dbg(pm8001_ha, MSG, "DEVREG_SUCCESS\n");
+ pm8001_dev->device_id = device_id;
+ break;
+ case DEVREG_FAILURE_OUT_OF_RESOURCE:
+ pm8001_dbg(pm8001_ha, MSG, "DEVREG_FAILURE_OUT_OF_RESOURCE\n");
+ break;
+ case DEVREG_FAILURE_DEVICE_ALREADY_REGISTERED:
+ pm8001_dbg(pm8001_ha, MSG,
+ "DEVREG_FAILURE_DEVICE_ALREADY_REGISTERED\n");
+ break;
+ case DEVREG_FAILURE_INVALID_PHY_ID:
+ pm8001_dbg(pm8001_ha, MSG, "DEVREG_FAILURE_INVALID_PHY_ID\n");
+ break;
+ case DEVREG_FAILURE_PHY_ID_ALREADY_REGISTERED:
+ pm8001_dbg(pm8001_ha, MSG,
+ "DEVREG_FAILURE_PHY_ID_ALREADY_REGISTERED\n");
+ break;
+ case DEVREG_FAILURE_PORT_ID_OUT_OF_RANGE:
+ pm8001_dbg(pm8001_ha, MSG,
+ "DEVREG_FAILURE_PORT_ID_OUT_OF_RANGE\n");
+ break;
+ case DEVREG_FAILURE_PORT_NOT_VALID_STATE:
+ pm8001_dbg(pm8001_ha, MSG,
+ "DEVREG_FAILURE_PORT_NOT_VALID_STATE\n");
+ break;
+ case DEVREG_FAILURE_DEVICE_TYPE_NOT_VALID:
+ pm8001_dbg(pm8001_ha, MSG,
+ "DEVREG_FAILURE_DEVICE_TYPE_NOT_VALID\n");
+ break;
+ default:
+ pm8001_dbg(pm8001_ha, MSG,
+ "DEVREG_FAILURE_DEVICE_TYPE_NOT_SUPPORTED\n");
+ break;
+ }
+ complete(pm8001_dev->dcompletion);
+ pm8001_ccb_free(pm8001_ha, ccb);
+ return 0;
+}
+
+int pm8001_mpi_dereg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ u32 status;
+ u32 device_id;
+ struct dev_reg_resp *registerRespPayload =
+ (struct dev_reg_resp *)(piomb + 4);
+
+ status = le32_to_cpu(registerRespPayload->status);
+ device_id = le32_to_cpu(registerRespPayload->device_id);
+ if (status != 0)
+ pm8001_dbg(pm8001_ha, MSG,
+ " deregister device failed ,status = %x, device_id = %x\n",
+ status, device_id);
+ return 0;
+}
+
+/**
+ * pm8001_mpi_fw_flash_update_resp - Response from FW for flash update command.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+int pm8001_mpi_fw_flash_update_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb)
+{
+ u32 status;
+ struct fw_flash_Update_resp *ppayload =
+ (struct fw_flash_Update_resp *)(piomb + 4);
+ u32 tag = le32_to_cpu(ppayload->tag);
+ struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[tag];
+
+ status = le32_to_cpu(ppayload->status);
+ switch (status) {
+ case FLASH_UPDATE_COMPLETE_PENDING_REBOOT:
+ pm8001_dbg(pm8001_ha, MSG,
+ ": FLASH_UPDATE_COMPLETE_PENDING_REBOOT\n");
+ break;
+ case FLASH_UPDATE_IN_PROGRESS:
+ pm8001_dbg(pm8001_ha, MSG, ": FLASH_UPDATE_IN_PROGRESS\n");
+ break;
+ case FLASH_UPDATE_HDR_ERR:
+ pm8001_dbg(pm8001_ha, MSG, ": FLASH_UPDATE_HDR_ERR\n");
+ break;
+ case FLASH_UPDATE_OFFSET_ERR:
+ pm8001_dbg(pm8001_ha, MSG, ": FLASH_UPDATE_OFFSET_ERR\n");
+ break;
+ case FLASH_UPDATE_CRC_ERR:
+ pm8001_dbg(pm8001_ha, MSG, ": FLASH_UPDATE_CRC_ERR\n");
+ break;
+ case FLASH_UPDATE_LENGTH_ERR:
+ pm8001_dbg(pm8001_ha, MSG, ": FLASH_UPDATE_LENGTH_ERR\n");
+ break;
+ case FLASH_UPDATE_HW_ERR:
+ pm8001_dbg(pm8001_ha, MSG, ": FLASH_UPDATE_HW_ERR\n");
+ break;
+ case FLASH_UPDATE_DNLD_NOT_SUPPORTED:
+ pm8001_dbg(pm8001_ha, MSG,
+ ": FLASH_UPDATE_DNLD_NOT_SUPPORTED\n");
+ break;
+ case FLASH_UPDATE_DISABLED:
+ pm8001_dbg(pm8001_ha, MSG, ": FLASH_UPDATE_DISABLED\n");
+ break;
+ default:
+ pm8001_dbg(pm8001_ha, DEVIO, "No matched status = %d\n",
+ status);
+ break;
+ }
+ kfree(ccb->fw_control_context);
+ pm8001_ccb_free(pm8001_ha, ccb);
+ complete(pm8001_ha->nvmd_completion);
+ return 0;
+}
+
+int pm8001_mpi_general_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ u32 status;
+ int i;
+ struct general_event_resp *pPayload =
+ (struct general_event_resp *)(piomb + 4);
+ status = le32_to_cpu(pPayload->status);
+ pm8001_dbg(pm8001_ha, MSG, " status = 0x%x\n", status);
+ for (i = 0; i < GENERAL_EVENT_PAYLOAD; i++)
+ pm8001_dbg(pm8001_ha, MSG, "inb_IOMB_payload[0x%x] 0x%x,\n",
+ i,
+ pPayload->inb_IOMB_payload[i]);
+ return 0;
+}
+
+int pm8001_mpi_task_abort_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct sas_task *t;
+ struct pm8001_ccb_info *ccb;
+ unsigned long flags;
+ u32 status ;
+ u32 tag, scp;
+ struct task_status_struct *ts;
+ struct pm8001_device *pm8001_dev;
+
+ struct task_abort_resp *pPayload =
+ (struct task_abort_resp *)(piomb + 4);
+
+ status = le32_to_cpu(pPayload->status);
+ tag = le32_to_cpu(pPayload->tag);
+
+ scp = le32_to_cpu(pPayload->scp);
+ ccb = &pm8001_ha->ccb_info[tag];
+ t = ccb->task;
+ pm8001_dev = ccb->device; /* retrieve device */
+
+ if (!t) {
+ pm8001_dbg(pm8001_ha, FAIL, " TASK NULL. RETURNING !!!\n");
+ return -1;
+ }
+
+ if (t->task_proto == SAS_PROTOCOL_INTERNAL_ABORT)
+ atomic_dec(&pm8001_dev->running_req);
+
+ ts = &t->task_status;
+ if (status != 0)
+ pm8001_dbg(pm8001_ha, FAIL, "task abort failed status 0x%x ,tag = 0x%x, scp= 0x%x\n",
+ status, tag, scp);
+ switch (status) {
+ case IO_SUCCESS:
+ pm8001_dbg(pm8001_ha, EH, "IO_SUCCESS\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_SAM_STAT_GOOD;
+ break;
+ case IO_NOT_VALID:
+ pm8001_dbg(pm8001_ha, EH, "IO_NOT_VALID\n");
+ ts->resp = TMF_RESP_FUNC_FAILED;
+ break;
+ }
+ spin_lock_irqsave(&t->task_state_lock, flags);
+ t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ t->task_state_flags |= SAS_TASK_STATE_DONE;
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_ccb_task_free(pm8001_ha, ccb);
+ mb();
+
+ t->task_done(t);
+
+ return 0;
+}
+
+/**
+ * mpi_hw_event -The hw event has come.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ unsigned long flags;
+ struct hw_event_resp *pPayload =
+ (struct hw_event_resp *)(piomb + 4);
+ u32 lr_evt_status_phyid_portid =
+ le32_to_cpu(pPayload->lr_evt_status_phyid_portid);
+ u8 port_id = (u8)(lr_evt_status_phyid_portid & 0x0000000F);
+ u8 phy_id =
+ (u8)((lr_evt_status_phyid_portid & 0x000000F0) >> 4);
+ u16 eventType =
+ (u16)((lr_evt_status_phyid_portid & 0x00FFFF00) >> 8);
+ u8 status =
+ (u8)((lr_evt_status_phyid_portid & 0x0F000000) >> 24);
+ struct sas_ha_struct *sas_ha = pm8001_ha->sas;
+ struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+ struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
+ pm8001_dbg(pm8001_ha, DEVIO,
+ "SPC HW event for portid:%d, phyid:%d, event:%x, status:%x\n",
+ port_id, phy_id, eventType, status);
+ switch (eventType) {
+ case HW_EVENT_PHY_START_STATUS:
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PHY_START_STATUS status = %x\n",
+ status);
+ if (status == 0)
+ phy->phy_state = 1;
+
+ if (pm8001_ha->flags == PM8001F_RUN_TIME &&
+ phy->enable_completion != NULL) {
+ complete(phy->enable_completion);
+ phy->enable_completion = NULL;
+ }
+ break;
+ case HW_EVENT_SAS_PHY_UP:
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PHY_START_STATUS\n");
+ hw_event_sas_phy_up(pm8001_ha, piomb);
+ break;
+ case HW_EVENT_SATA_PHY_UP:
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_SATA_PHY_UP\n");
+ hw_event_sata_phy_up(pm8001_ha, piomb);
+ break;
+ case HW_EVENT_PHY_STOP_STATUS:
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PHY_STOP_STATUS status = %x\n",
+ status);
+ if (status == 0)
+ phy->phy_state = 0;
+ break;
+ case HW_EVENT_SATA_SPINUP_HOLD:
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_SATA_SPINUP_HOLD\n");
+ sas_notify_phy_event(&phy->sas_phy, PHYE_SPINUP_HOLD,
+ GFP_ATOMIC);
+ break;
+ case HW_EVENT_PHY_DOWN:
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PHY_DOWN\n");
+ sas_notify_phy_event(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL,
+ GFP_ATOMIC);
+ phy->phy_attached = 0;
+ phy->phy_state = 0;
+ hw_event_phy_down(pm8001_ha, piomb);
+ break;
+ case HW_EVENT_PORT_INVALID:
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PORT_INVALID\n");
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_notify_port_event(sas_phy, PORTE_LINK_RESET_ERR,
+ GFP_ATOMIC);
+ break;
+ /* the broadcast change primitive received, tell the LIBSAS this event
+ to revalidate the sas domain*/
+ case HW_EVENT_BROADCAST_CHANGE:
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_BROADCAST_CHANGE\n");
+ pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_BROADCAST_CHANGE,
+ port_id, phy_id, 1, 0);
+ spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
+ sas_phy->sas_prim = HW_EVENT_BROADCAST_CHANGE;
+ spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
+ sas_notify_port_event(sas_phy, PORTE_BROADCAST_RCVD,
+ GFP_ATOMIC);
+ break;
+ case HW_EVENT_PHY_ERROR:
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PHY_ERROR\n");
+ sas_phy_disconnected(&phy->sas_phy);
+ phy->phy_attached = 0;
+ sas_notify_phy_event(&phy->sas_phy, PHYE_OOB_ERROR, GFP_ATOMIC);
+ break;
+ case HW_EVENT_BROADCAST_EXP:
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_BROADCAST_EXP\n");
+ spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
+ sas_phy->sas_prim = HW_EVENT_BROADCAST_EXP;
+ spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
+ sas_notify_port_event(sas_phy, PORTE_BROADCAST_RCVD,
+ GFP_ATOMIC);
+ break;
+ case HW_EVENT_LINK_ERR_INVALID_DWORD:
+ pm8001_dbg(pm8001_ha, MSG,
+ "HW_EVENT_LINK_ERR_INVALID_DWORD\n");
+ pm8001_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_LINK_ERR_INVALID_DWORD, port_id, phy_id, 0, 0);
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_notify_port_event(sas_phy, PORTE_LINK_RESET_ERR,
+ GFP_ATOMIC);
+ break;
+ case HW_EVENT_LINK_ERR_DISPARITY_ERROR:
+ pm8001_dbg(pm8001_ha, MSG,
+ "HW_EVENT_LINK_ERR_DISPARITY_ERROR\n");
+ pm8001_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_LINK_ERR_DISPARITY_ERROR,
+ port_id, phy_id, 0, 0);
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_notify_port_event(sas_phy, PORTE_LINK_RESET_ERR,
+ GFP_ATOMIC);
+ break;
+ case HW_EVENT_LINK_ERR_CODE_VIOLATION:
+ pm8001_dbg(pm8001_ha, MSG,
+ "HW_EVENT_LINK_ERR_CODE_VIOLATION\n");
+ pm8001_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_LINK_ERR_CODE_VIOLATION,
+ port_id, phy_id, 0, 0);
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_notify_port_event(sas_phy, PORTE_LINK_RESET_ERR,
+ GFP_ATOMIC);
+ break;
+ case HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH:
+ pm8001_dbg(pm8001_ha, MSG,
+ "HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH\n");
+ pm8001_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH,
+ port_id, phy_id, 0, 0);
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_notify_port_event(sas_phy, PORTE_LINK_RESET_ERR,
+ GFP_ATOMIC);
+ break;
+ case HW_EVENT_MALFUNCTION:
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_MALFUNCTION\n");
+ break;
+ case HW_EVENT_BROADCAST_SES:
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_BROADCAST_SES\n");
+ spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
+ sas_phy->sas_prim = HW_EVENT_BROADCAST_SES;
+ spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
+ sas_notify_port_event(sas_phy, PORTE_BROADCAST_RCVD,
+ GFP_ATOMIC);
+ break;
+ case HW_EVENT_INBOUND_CRC_ERROR:
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_INBOUND_CRC_ERROR\n");
+ pm8001_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_INBOUND_CRC_ERROR,
+ port_id, phy_id, 0, 0);
+ break;
+ case HW_EVENT_HARD_RESET_RECEIVED:
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_HARD_RESET_RECEIVED\n");
+ sas_notify_port_event(sas_phy, PORTE_HARD_RESET, GFP_ATOMIC);
+ break;
+ case HW_EVENT_ID_FRAME_TIMEOUT:
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_ID_FRAME_TIMEOUT\n");
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_notify_port_event(sas_phy, PORTE_LINK_RESET_ERR,
+ GFP_ATOMIC);
+ break;
+ case HW_EVENT_LINK_ERR_PHY_RESET_FAILED:
+ pm8001_dbg(pm8001_ha, MSG,
+ "HW_EVENT_LINK_ERR_PHY_RESET_FAILED\n");
+ pm8001_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_LINK_ERR_PHY_RESET_FAILED,
+ port_id, phy_id, 0, 0);
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_notify_port_event(sas_phy, PORTE_LINK_RESET_ERR,
+ GFP_ATOMIC);
+ break;
+ case HW_EVENT_PORT_RESET_TIMER_TMO:
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PORT_RESET_TIMER_TMO\n");
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_notify_port_event(sas_phy, PORTE_LINK_RESET_ERR,
+ GFP_ATOMIC);
+ break;
+ case HW_EVENT_PORT_RECOVERY_TIMER_TMO:
+ pm8001_dbg(pm8001_ha, MSG,
+ "HW_EVENT_PORT_RECOVERY_TIMER_TMO\n");
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_notify_port_event(sas_phy, PORTE_LINK_RESET_ERR,
+ GFP_ATOMIC);
+ break;
+ case HW_EVENT_PORT_RECOVER:
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PORT_RECOVER\n");
+ break;
+ case HW_EVENT_PORT_RESET_COMPLETE:
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PORT_RESET_COMPLETE\n");
+ break;
+ case EVENT_BROADCAST_ASYNCH_EVENT:
+ pm8001_dbg(pm8001_ha, MSG, "EVENT_BROADCAST_ASYNCH_EVENT\n");
+ break;
+ default:
+ pm8001_dbg(pm8001_ha, DEVIO, "Unknown event type = %x\n",
+ eventType);
+ break;
+ }
+ return 0;
+}
+
+/**
+ * process_one_iomb - process one outbound Queue memory block
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static void process_one_iomb(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ __le32 pHeader = *(__le32 *)piomb;
+ u8 opc = (u8)((le32_to_cpu(pHeader)) & 0xFFF);
+
+ pm8001_dbg(pm8001_ha, MSG, "process_one_iomb:\n");
+
+ switch (opc) {
+ case OPC_OUB_ECHO:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_ECHO\n");
+ break;
+ case OPC_OUB_HW_EVENT:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_HW_EVENT\n");
+ mpi_hw_event(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SSP_COMP:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SSP_COMP\n");
+ mpi_ssp_completion(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SMP_COMP:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SMP_COMP\n");
+ mpi_smp_completion(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_LOCAL_PHY_CNTRL:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_LOCAL_PHY_CNTRL\n");
+ pm8001_mpi_local_phy_ctl(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_DEV_REGIST:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_DEV_REGIST\n");
+ pm8001_mpi_reg_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_DEREG_DEV:
+ pm8001_dbg(pm8001_ha, MSG, "unregister the device\n");
+ pm8001_mpi_dereg_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_GET_DEV_HANDLE:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GET_DEV_HANDLE\n");
+ break;
+ case OPC_OUB_SATA_COMP:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SATA_COMP\n");
+ mpi_sata_completion(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SATA_EVENT:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SATA_EVENT\n");
+ mpi_sata_event(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SSP_EVENT:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SSP_EVENT\n");
+ mpi_ssp_event(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_DEV_HANDLE_ARRIV:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_DEV_HANDLE_ARRIV\n");
+ /*This is for target*/
+ break;
+ case OPC_OUB_SSP_RECV_EVENT:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SSP_RECV_EVENT\n");
+ /*This is for target*/
+ break;
+ case OPC_OUB_DEV_INFO:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_DEV_INFO\n");
+ break;
+ case OPC_OUB_FW_FLASH_UPDATE:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_FW_FLASH_UPDATE\n");
+ pm8001_mpi_fw_flash_update_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_GPIO_RESPONSE:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GPIO_RESPONSE\n");
+ break;
+ case OPC_OUB_GPIO_EVENT:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GPIO_EVENT\n");
+ break;
+ case OPC_OUB_GENERAL_EVENT:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GENERAL_EVENT\n");
+ pm8001_mpi_general_event(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SSP_ABORT_RSP:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SSP_ABORT_RSP\n");
+ pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SATA_ABORT_RSP:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SATA_ABORT_RSP\n");
+ pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SAS_DIAG_MODE_START_END:
+ pm8001_dbg(pm8001_ha, MSG,
+ "OPC_OUB_SAS_DIAG_MODE_START_END\n");
+ break;
+ case OPC_OUB_SAS_DIAG_EXECUTE:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SAS_DIAG_EXECUTE\n");
+ break;
+ case OPC_OUB_GET_TIME_STAMP:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GET_TIME_STAMP\n");
+ break;
+ case OPC_OUB_SAS_HW_EVENT_ACK:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SAS_HW_EVENT_ACK\n");
+ break;
+ case OPC_OUB_PORT_CONTROL:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_PORT_CONTROL\n");
+ break;
+ case OPC_OUB_SMP_ABORT_RSP:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SMP_ABORT_RSP\n");
+ pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_GET_NVMD_DATA:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GET_NVMD_DATA\n");
+ pm8001_mpi_get_nvmd_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SET_NVMD_DATA:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SET_NVMD_DATA\n");
+ pm8001_mpi_set_nvmd_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_DEVICE_HANDLE_REMOVAL:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_DEVICE_HANDLE_REMOVAL\n");
+ break;
+ case OPC_OUB_SET_DEVICE_STATE:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SET_DEVICE_STATE\n");
+ pm8001_mpi_set_dev_state_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_GET_DEVICE_STATE:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GET_DEVICE_STATE\n");
+ break;
+ case OPC_OUB_SET_DEV_INFO:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SET_DEV_INFO\n");
+ break;
+ case OPC_OUB_SAS_RE_INITIALIZE:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SAS_RE_INITIALIZE\n");
+ break;
+ default:
+ pm8001_dbg(pm8001_ha, DEVIO,
+ "Unknown outbound Queue IOMB OPC = %x\n",
+ opc);
+ break;
+ }
+}
+
+static int process_oq(struct pm8001_hba_info *pm8001_ha, u8 vec)
+{
+ struct outbound_queue_table *circularQ;
+ void *pMsg1 = NULL;
+ u8 bc;
+ u32 ret = MPI_IO_STATUS_FAIL;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+ circularQ = &pm8001_ha->outbnd_q_tbl[vec];
+ do {
+ ret = pm8001_mpi_msg_consume(pm8001_ha, circularQ, &pMsg1, &bc);
+ if (MPI_IO_STATUS_SUCCESS == ret) {
+ /* process the outbound message */
+ process_one_iomb(pm8001_ha, (void *)(pMsg1 - 4));
+ /* free the message from the outbound circular buffer */
+ pm8001_mpi_msg_free_set(pm8001_ha, pMsg1,
+ circularQ, bc);
+ }
+ if (MPI_IO_STATUS_BUSY == ret) {
+ /* Update the producer index from SPC */
+ circularQ->producer_index =
+ cpu_to_le32(pm8001_read_32(circularQ->pi_virt));
+ if (le32_to_cpu(circularQ->producer_index) ==
+ circularQ->consumer_idx)
+ /* OQ is empty */
+ break;
+ }
+ } while (1);
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ return ret;
+}
+
+/* DMA_... to our direction translation. */
+static const u8 data_dir_flags[] = {
+ [DMA_BIDIRECTIONAL] = DATA_DIR_BYRECIPIENT, /* UNSPECIFIED */
+ [DMA_TO_DEVICE] = DATA_DIR_OUT, /* OUTBOUND */
+ [DMA_FROM_DEVICE] = DATA_DIR_IN, /* INBOUND */
+ [DMA_NONE] = DATA_DIR_NONE, /* NO TRANSFER */
+};
+void
+pm8001_chip_make_sg(struct scatterlist *scatter, int nr, void *prd)
+{
+ int i;
+ struct scatterlist *sg;
+ struct pm8001_prd *buf_prd = prd;
+
+ for_each_sg(scatter, sg, nr, i) {
+ buf_prd->addr = cpu_to_le64(sg_dma_address(sg));
+ buf_prd->im_len.len = cpu_to_le32(sg_dma_len(sg));
+ buf_prd->im_len.e = 0;
+ buf_prd++;
+ }
+}
+
+static void build_smp_cmd(u32 deviceID, __le32 hTag, struct smp_req *psmp_cmd)
+{
+ psmp_cmd->tag = hTag;
+ psmp_cmd->device_id = cpu_to_le32(deviceID);
+ psmp_cmd->len_ip_ir = cpu_to_le32(1|(1 << 1));
+}
+
+/**
+ * pm8001_chip_smp_req - send a SMP task to FW
+ * @pm8001_ha: our hba card information.
+ * @ccb: the ccb information this request used.
+ */
+static int pm8001_chip_smp_req(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb)
+{
+ int elem, rc;
+ struct sas_task *task = ccb->task;
+ struct domain_device *dev = task->dev;
+ struct pm8001_device *pm8001_dev = dev->lldd_dev;
+ struct scatterlist *sg_req, *sg_resp;
+ u32 req_len, resp_len;
+ struct smp_req smp_cmd;
+ u32 opc;
+
+ memset(&smp_cmd, 0, sizeof(smp_cmd));
+ /*
+ * DMA-map SMP request, response buffers
+ */
+ sg_req = &task->smp_task.smp_req;
+ elem = dma_map_sg(pm8001_ha->dev, sg_req, 1, DMA_TO_DEVICE);
+ if (!elem)
+ return -ENOMEM;
+ req_len = sg_dma_len(sg_req);
+
+ sg_resp = &task->smp_task.smp_resp;
+ elem = dma_map_sg(pm8001_ha->dev, sg_resp, 1, DMA_FROM_DEVICE);
+ if (!elem) {
+ rc = -ENOMEM;
+ goto err_out;
+ }
+ resp_len = sg_dma_len(sg_resp);
+ /* must be in dwords */
+ if ((req_len & 0x3) || (resp_len & 0x3)) {
+ rc = -EINVAL;
+ goto err_out_2;
+ }
+
+ opc = OPC_INB_SMP_REQUEST;
+ smp_cmd.tag = cpu_to_le32(ccb->ccb_tag);
+ smp_cmd.long_smp_req.long_req_addr =
+ cpu_to_le64((u64)sg_dma_address(&task->smp_task.smp_req));
+ smp_cmd.long_smp_req.long_req_size =
+ cpu_to_le32((u32)sg_dma_len(&task->smp_task.smp_req)-4);
+ smp_cmd.long_smp_req.long_resp_addr =
+ cpu_to_le64((u64)sg_dma_address(&task->smp_task.smp_resp));
+ smp_cmd.long_smp_req.long_resp_size =
+ cpu_to_le32((u32)sg_dma_len(&task->smp_task.smp_resp)-4);
+ build_smp_cmd(pm8001_dev->device_id, smp_cmd.tag, &smp_cmd);
+ rc = pm8001_mpi_build_cmd(pm8001_ha, 0, opc,
+ &smp_cmd, sizeof(smp_cmd), 0);
+ if (rc)
+ goto err_out_2;
+
+ return 0;
+
+err_out_2:
+ dma_unmap_sg(pm8001_ha->dev, &ccb->task->smp_task.smp_resp, 1,
+ DMA_FROM_DEVICE);
+err_out:
+ dma_unmap_sg(pm8001_ha->dev, &ccb->task->smp_task.smp_req, 1,
+ DMA_TO_DEVICE);
+ return rc;
+}
+
+/**
+ * pm8001_chip_ssp_io_req - send a SSP task to FW
+ * @pm8001_ha: our hba card information.
+ * @ccb: the ccb information this request used.
+ */
+static int pm8001_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb)
+{
+ struct sas_task *task = ccb->task;
+ struct domain_device *dev = task->dev;
+ struct pm8001_device *pm8001_dev = dev->lldd_dev;
+ struct ssp_ini_io_start_req ssp_cmd;
+ u32 tag = ccb->ccb_tag;
+ u64 phys_addr;
+ u32 opc = OPC_INB_SSPINIIOSTART;
+ memset(&ssp_cmd, 0, sizeof(ssp_cmd));
+ memcpy(ssp_cmd.ssp_iu.lun, task->ssp_task.LUN, 8);
+ ssp_cmd.dir_m_tlr =
+ cpu_to_le32(data_dir_flags[task->data_dir] << 8 | 0x0);/*0 for
+ SAS 1.1 compatible TLR*/
+ ssp_cmd.data_len = cpu_to_le32(task->total_xfer_len);
+ ssp_cmd.device_id = cpu_to_le32(pm8001_dev->device_id);
+ ssp_cmd.tag = cpu_to_le32(tag);
+ ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_attr & 7);
+ memcpy(ssp_cmd.ssp_iu.cdb, task->ssp_task.cmd->cmnd,
+ task->ssp_task.cmd->cmd_len);
+
+ /* fill in PRD (scatter/gather) table, if any */
+ if (task->num_scatter > 1) {
+ pm8001_chip_make_sg(task->scatter, ccb->n_elem, ccb->buf_prd);
+ phys_addr = ccb->ccb_dma_handle;
+ ssp_cmd.addr_low = cpu_to_le32(lower_32_bits(phys_addr));
+ ssp_cmd.addr_high = cpu_to_le32(upper_32_bits(phys_addr));
+ ssp_cmd.esgl = cpu_to_le32(1<<31);
+ } else if (task->num_scatter == 1) {
+ u64 dma_addr = sg_dma_address(task->scatter);
+ ssp_cmd.addr_low = cpu_to_le32(lower_32_bits(dma_addr));
+ ssp_cmd.addr_high = cpu_to_le32(upper_32_bits(dma_addr));
+ ssp_cmd.len = cpu_to_le32(task->total_xfer_len);
+ ssp_cmd.esgl = 0;
+ } else if (task->num_scatter == 0) {
+ ssp_cmd.addr_low = 0;
+ ssp_cmd.addr_high = 0;
+ ssp_cmd.len = cpu_to_le32(task->total_xfer_len);
+ ssp_cmd.esgl = 0;
+ }
+
+ return pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &ssp_cmd,
+ sizeof(ssp_cmd), 0);
+}
+
+static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb)
+{
+ struct sas_task *task = ccb->task;
+ struct domain_device *dev = task->dev;
+ struct pm8001_device *pm8001_ha_dev = dev->lldd_dev;
+ u32 tag = ccb->ccb_tag;
+ struct sata_start_req sata_cmd;
+ u32 hdr_tag, ncg_tag = 0;
+ u64 phys_addr;
+ u32 ATAP = 0x0;
+ u32 dir, retfis = 0;
+ u32 opc = OPC_INB_SATA_HOST_OPSTART;
+
+ memset(&sata_cmd, 0, sizeof(sata_cmd));
+
+ if (task->data_dir == DMA_NONE && !task->ata_task.use_ncq) {
+ ATAP = 0x04; /* no data*/
+ pm8001_dbg(pm8001_ha, IO, "no data\n");
+ } else if (likely(!task->ata_task.device_control_reg_update)) {
+ if (task->ata_task.use_ncq &&
+ dev->sata_dev.class != ATA_DEV_ATAPI) {
+ ATAP = 0x07; /* FPDMA */
+ pm8001_dbg(pm8001_ha, IO, "FPDMA\n");
+ } else if (task->ata_task.dma_xfer) {
+ ATAP = 0x06; /* DMA */
+ pm8001_dbg(pm8001_ha, IO, "DMA\n");
+ } else {
+ ATAP = 0x05; /* PIO*/
+ pm8001_dbg(pm8001_ha, IO, "PIO\n");
+ }
+ }
+ if (task->ata_task.use_ncq && pm8001_get_ncq_tag(task, &hdr_tag)) {
+ task->ata_task.fis.sector_count |= (u8) (hdr_tag << 3);
+ ncg_tag = hdr_tag;
+ }
+ dir = data_dir_flags[task->data_dir] << 8;
+ sata_cmd.tag = cpu_to_le32(tag);
+ sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
+ sata_cmd.data_len = cpu_to_le32(task->total_xfer_len);
+ if (task->ata_task.return_fis_on_success)
+ retfis = 1;
+ sata_cmd.retfis_ncqtag_atap_dir_m =
+ cpu_to_le32((retfis << 24) | ((ncg_tag & 0xff) << 16) |
+ ((ATAP & 0x3f) << 10) | dir);
+ sata_cmd.sata_fis = task->ata_task.fis;
+ if (likely(!task->ata_task.device_control_reg_update))
+ sata_cmd.sata_fis.flags |= 0x80;/* C=1: update ATA cmd reg */
+ sata_cmd.sata_fis.flags &= 0xF0;/* PM_PORT field shall be 0 */
+ /* fill in PRD (scatter/gather) table, if any */
+ if (task->num_scatter > 1) {
+ pm8001_chip_make_sg(task->scatter, ccb->n_elem, ccb->buf_prd);
+ phys_addr = ccb->ccb_dma_handle;
+ sata_cmd.addr_low = lower_32_bits(phys_addr);
+ sata_cmd.addr_high = upper_32_bits(phys_addr);
+ sata_cmd.esgl = cpu_to_le32(1 << 31);
+ } else if (task->num_scatter == 1) {
+ u64 dma_addr = sg_dma_address(task->scatter);
+ sata_cmd.addr_low = lower_32_bits(dma_addr);
+ sata_cmd.addr_high = upper_32_bits(dma_addr);
+ sata_cmd.len = cpu_to_le32(task->total_xfer_len);
+ sata_cmd.esgl = 0;
+ } else if (task->num_scatter == 0) {
+ sata_cmd.addr_low = 0;
+ sata_cmd.addr_high = 0;
+ sata_cmd.len = cpu_to_le32(task->total_xfer_len);
+ sata_cmd.esgl = 0;
+ }
+
+ return pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &sata_cmd,
+ sizeof(sata_cmd), 0);
+}
+
+/**
+ * pm8001_chip_phy_start_req - start phy via PHY_START COMMAND
+ * @pm8001_ha: our hba card information.
+ * @phy_id: the phy id which we wanted to start up.
+ */
+static int
+pm8001_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id)
+{
+ struct phy_start_req payload;
+ u32 tag = 0x01;
+ u32 opcode = OPC_INB_PHYSTART;
+
+ memset(&payload, 0, sizeof(payload));
+ payload.tag = cpu_to_le32(tag);
+ /*
+ ** [0:7] PHY Identifier
+ ** [8:11] link rate 1.5G, 3G, 6G
+ ** [12:13] link mode 01b SAS mode; 10b SATA mode; 11b both
+ ** [14] 0b disable spin up hold; 1b enable spin up hold
+ */
+ payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE |
+ LINKMODE_AUTO | LINKRATE_15 |
+ LINKRATE_30 | LINKRATE_60 | phy_id);
+ payload.sas_identify.dev_type = SAS_END_DEVICE;
+ payload.sas_identify.initiator_bits = SAS_PROTOCOL_ALL;
+ memcpy(payload.sas_identify.sas_addr,
+ &pm8001_ha->phy[phy_id].dev_sas_addr, SAS_ADDR_SIZE);
+ payload.sas_identify.phy_id = phy_id;
+
+ return pm8001_mpi_build_cmd(pm8001_ha, 0, opcode, &payload,
+ sizeof(payload), 0);
+}
+
+/**
+ * pm8001_chip_phy_stop_req - start phy via PHY_STOP COMMAND
+ * @pm8001_ha: our hba card information.
+ * @phy_id: the phy id which we wanted to start up.
+ */
+static int pm8001_chip_phy_stop_req(struct pm8001_hba_info *pm8001_ha,
+ u8 phy_id)
+{
+ struct phy_stop_req payload;
+ u32 tag = 0x01;
+ u32 opcode = OPC_INB_PHYSTOP;
+
+ memset(&payload, 0, sizeof(payload));
+ payload.tag = cpu_to_le32(tag);
+ payload.phy_id = cpu_to_le32(phy_id);
+
+ return pm8001_mpi_build_cmd(pm8001_ha, 0, opcode, &payload,
+ sizeof(payload), 0);
+}
+
+/*
+ * see comments on pm8001_mpi_reg_resp.
+ */
+static int pm8001_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_device *pm8001_dev, u32 flag)
+{
+ struct reg_dev_req payload;
+ u32 opc;
+ u32 stp_sspsmp_sata = 0x4;
+ u32 linkrate, phy_id;
+ int rc;
+ struct pm8001_ccb_info *ccb;
+ u8 retryFlag = 0x1;
+ u16 firstBurstSize = 0;
+ u16 ITNT = 2000;
+ struct domain_device *dev = pm8001_dev->sas_device;
+ struct domain_device *parent_dev = dev->parent;
+ struct pm8001_port *port = dev->port->lldd_port;
+
+ memset(&payload, 0, sizeof(payload));
+ ccb = pm8001_ccb_alloc(pm8001_ha, pm8001_dev, NULL);
+ if (!ccb)
+ return -SAS_QUEUE_FULL;
+
+ payload.tag = cpu_to_le32(ccb->ccb_tag);
+ if (flag == 1)
+ stp_sspsmp_sata = 0x02; /*direct attached sata */
+ else {
+ if (pm8001_dev->dev_type == SAS_SATA_DEV)
+ stp_sspsmp_sata = 0x00; /* stp*/
+ else if (pm8001_dev->dev_type == SAS_END_DEVICE ||
+ dev_is_expander(pm8001_dev->dev_type))
+ stp_sspsmp_sata = 0x01; /*ssp or smp*/
+ }
+ if (parent_dev && dev_is_expander(parent_dev->dev_type))
+ phy_id = parent_dev->ex_dev.ex_phy->phy_id;
+ else
+ phy_id = pm8001_dev->attached_phy;
+ opc = OPC_INB_REG_DEV;
+ linkrate = (pm8001_dev->sas_device->linkrate < dev->port->linkrate) ?
+ pm8001_dev->sas_device->linkrate : dev->port->linkrate;
+ payload.phyid_portid =
+ cpu_to_le32(((port->port_id) & 0x0F) |
+ ((phy_id & 0x0F) << 4));
+ payload.dtype_dlr_retry = cpu_to_le32((retryFlag & 0x01) |
+ ((linkrate & 0x0F) * 0x1000000) |
+ ((stp_sspsmp_sata & 0x03) * 0x10000000));
+ payload.firstburstsize_ITNexustimeout =
+ cpu_to_le32(ITNT | (firstBurstSize * 0x10000));
+ memcpy(payload.sas_addr, pm8001_dev->sas_device->sas_addr,
+ SAS_ADDR_SIZE);
+
+ rc = pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &payload,
+ sizeof(payload), 0);
+ if (rc)
+ pm8001_ccb_free(pm8001_ha, ccb);
+
+ return rc;
+}
+
+/*
+ * see comments on pm8001_mpi_reg_resp.
+ */
+int pm8001_chip_dereg_dev_req(struct pm8001_hba_info *pm8001_ha,
+ u32 device_id)
+{
+ struct dereg_dev_req payload;
+ u32 opc = OPC_INB_DEREG_DEV_HANDLE;
+
+ memset(&payload, 0, sizeof(payload));
+ payload.tag = cpu_to_le32(1);
+ payload.device_id = cpu_to_le32(device_id);
+ pm8001_dbg(pm8001_ha, INIT, "unregister device device_id %d\n",
+ device_id);
+
+ return pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &payload,
+ sizeof(payload), 0);
+}
+
+/**
+ * pm8001_chip_phy_ctl_req - support the local phy operation
+ * @pm8001_ha: our hba card information.
+ * @phyId: the phy id which we wanted to operate
+ * @phy_op: the phy operation to request
+ */
+static int pm8001_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha,
+ u32 phyId, u32 phy_op)
+{
+ struct local_phy_ctl_req payload;
+ u32 opc = OPC_INB_LOCAL_PHY_CONTROL;
+
+ memset(&payload, 0, sizeof(payload));
+ payload.tag = cpu_to_le32(1);
+ payload.phyop_phyid =
+ cpu_to_le32(((phy_op & 0xff) << 8) | (phyId & 0x0F));
+
+ return pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &payload,
+ sizeof(payload), 0);
+}
+
+static u32 pm8001_chip_is_our_interrupt(struct pm8001_hba_info *pm8001_ha)
+{
+#ifdef PM8001_USE_MSIX
+ return 1;
+#else
+ u32 value;
+
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_ODR);
+ if (value)
+ return 1;
+ return 0;
+#endif
+}
+
+/**
+ * pm8001_chip_isr - PM8001 isr handler.
+ * @pm8001_ha: our hba card information.
+ * @vec: IRQ number
+ */
+static irqreturn_t
+pm8001_chip_isr(struct pm8001_hba_info *pm8001_ha, u8 vec)
+{
+ pm8001_chip_interrupt_disable(pm8001_ha, vec);
+ pm8001_dbg(pm8001_ha, DEVIO,
+ "irq vec %d, ODMR:0x%x\n",
+ vec, pm8001_cr32(pm8001_ha, 0, 0x30));
+ process_oq(pm8001_ha, vec);
+ pm8001_chip_interrupt_enable(pm8001_ha, vec);
+ return IRQ_HANDLED;
+}
+
+static int send_task_abort(struct pm8001_hba_info *pm8001_ha, u32 opc,
+ u32 dev_id, enum sas_internal_abort type, u32 task_tag, u32 cmd_tag)
+{
+ struct task_abort_req task_abort;
+
+ memset(&task_abort, 0, sizeof(task_abort));
+ if (type == SAS_INTERNAL_ABORT_SINGLE) {
+ task_abort.abort_all = 0;
+ task_abort.device_id = cpu_to_le32(dev_id);
+ task_abort.tag_to_abort = cpu_to_le32(task_tag);
+ } else if (type == SAS_INTERNAL_ABORT_DEV) {
+ task_abort.abort_all = cpu_to_le32(1);
+ task_abort.device_id = cpu_to_le32(dev_id);
+ } else {
+ pm8001_dbg(pm8001_ha, EH, "unknown type (%d)\n", type);
+ return -EIO;
+ }
+
+ task_abort.tag = cpu_to_le32(cmd_tag);
+
+ return pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &task_abort,
+ sizeof(task_abort), 0);
+}
+
+/*
+ * pm8001_chip_abort_task - SAS abort task when error or exception happened.
+ */
+int pm8001_chip_abort_task(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb)
+{
+ struct sas_task *task = ccb->task;
+ struct sas_internal_abort_task *abort = &task->abort_task;
+ struct pm8001_device *pm8001_dev = ccb->device;
+ int rc = TMF_RESP_FUNC_FAILED;
+ u32 opc, device_id;
+
+ pm8001_dbg(pm8001_ha, EH, "cmd_tag = %x, abort task tag = 0x%x\n",
+ ccb->ccb_tag, abort->tag);
+ if (pm8001_dev->dev_type == SAS_END_DEVICE)
+ opc = OPC_INB_SSP_ABORT;
+ else if (pm8001_dev->dev_type == SAS_SATA_DEV)
+ opc = OPC_INB_SATA_ABORT;
+ else
+ opc = OPC_INB_SMP_ABORT;/* SMP */
+ device_id = pm8001_dev->device_id;
+ rc = send_task_abort(pm8001_ha, opc, device_id, abort->type,
+ abort->tag, ccb->ccb_tag);
+ if (rc != TMF_RESP_FUNC_COMPLETE)
+ pm8001_dbg(pm8001_ha, EH, "rc= %d\n", rc);
+ return rc;
+}
+
+/**
+ * pm8001_chip_ssp_tm_req - built the task management command.
+ * @pm8001_ha: our hba card information.
+ * @ccb: the ccb information.
+ * @tmf: task management function.
+ */
+int pm8001_chip_ssp_tm_req(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb, struct sas_tmf_task *tmf)
+{
+ struct sas_task *task = ccb->task;
+ struct domain_device *dev = task->dev;
+ struct pm8001_device *pm8001_dev = dev->lldd_dev;
+ u32 opc = OPC_INB_SSPINITMSTART;
+ struct ssp_ini_tm_start_req sspTMCmd;
+
+ memset(&sspTMCmd, 0, sizeof(sspTMCmd));
+ sspTMCmd.device_id = cpu_to_le32(pm8001_dev->device_id);
+ sspTMCmd.relate_tag = cpu_to_le32((u32)tmf->tag_of_task_to_be_managed);
+ sspTMCmd.tmf = cpu_to_le32(tmf->tmf);
+ memcpy(sspTMCmd.lun, task->ssp_task.LUN, 8);
+ sspTMCmd.tag = cpu_to_le32(ccb->ccb_tag);
+ if (pm8001_ha->chip_id != chip_8001)
+ sspTMCmd.ds_ads_m = cpu_to_le32(0x08);
+
+ return pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &sspTMCmd,
+ sizeof(sspTMCmd), 0);
+}
+
+int pm8001_chip_get_nvmd_req(struct pm8001_hba_info *pm8001_ha,
+ void *payload)
+{
+ u32 opc = OPC_INB_GET_NVMD_DATA;
+ u32 nvmd_type;
+ int rc;
+ struct pm8001_ccb_info *ccb;
+ struct get_nvm_data_req nvmd_req;
+ struct fw_control_ex *fw_control_context;
+ struct pm8001_ioctl_payload *ioctl_payload = payload;
+
+ nvmd_type = ioctl_payload->minor_function;
+ fw_control_context = kzalloc(sizeof(struct fw_control_ex), GFP_KERNEL);
+ if (!fw_control_context)
+ return -ENOMEM;
+ fw_control_context->usrAddr = (u8 *)ioctl_payload->func_specific;
+ fw_control_context->len = ioctl_payload->rd_length;
+ memset(&nvmd_req, 0, sizeof(nvmd_req));
+
+ ccb = pm8001_ccb_alloc(pm8001_ha, NULL, NULL);
+ if (!ccb) {
+ kfree(fw_control_context);
+ return -SAS_QUEUE_FULL;
+ }
+ ccb->fw_control_context = fw_control_context;
+
+ nvmd_req.tag = cpu_to_le32(ccb->ccb_tag);
+
+ switch (nvmd_type) {
+ case TWI_DEVICE: {
+ u32 twi_addr, twi_page_size;
+ twi_addr = 0xa8;
+ twi_page_size = 2;
+
+ nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | twi_addr << 16 |
+ twi_page_size << 8 | TWI_DEVICE);
+ nvmd_req.resp_len = cpu_to_le32(ioctl_payload->rd_length);
+ nvmd_req.resp_addr_hi =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+ nvmd_req.resp_addr_lo =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+ break;
+ }
+ case C_SEEPROM: {
+ nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | C_SEEPROM);
+ nvmd_req.resp_len = cpu_to_le32(ioctl_payload->rd_length);
+ nvmd_req.resp_addr_hi =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+ nvmd_req.resp_addr_lo =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+ break;
+ }
+ case VPD_FLASH: {
+ nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | VPD_FLASH);
+ nvmd_req.resp_len = cpu_to_le32(ioctl_payload->rd_length);
+ nvmd_req.resp_addr_hi =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+ nvmd_req.resp_addr_lo =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+ break;
+ }
+ case EXPAN_ROM: {
+ nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | EXPAN_ROM);
+ nvmd_req.resp_len = cpu_to_le32(ioctl_payload->rd_length);
+ nvmd_req.resp_addr_hi =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+ nvmd_req.resp_addr_lo =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+ break;
+ }
+ case IOP_RDUMP: {
+ nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | IOP_RDUMP);
+ nvmd_req.resp_len = cpu_to_le32(ioctl_payload->rd_length);
+ nvmd_req.vpd_offset = cpu_to_le32(ioctl_payload->offset);
+ nvmd_req.resp_addr_hi =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+ nvmd_req.resp_addr_lo =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+ break;
+ }
+ default:
+ break;
+ }
+
+ rc = pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &nvmd_req,
+ sizeof(nvmd_req), 0);
+ if (rc) {
+ kfree(fw_control_context);
+ pm8001_ccb_free(pm8001_ha, ccb);
+ }
+ return rc;
+}
+
+int pm8001_chip_set_nvmd_req(struct pm8001_hba_info *pm8001_ha,
+ void *payload)
+{
+ u32 opc = OPC_INB_SET_NVMD_DATA;
+ u32 nvmd_type;
+ int rc;
+ struct pm8001_ccb_info *ccb;
+ struct set_nvm_data_req nvmd_req;
+ struct fw_control_ex *fw_control_context;
+ struct pm8001_ioctl_payload *ioctl_payload = payload;
+
+ nvmd_type = ioctl_payload->minor_function;
+ fw_control_context = kzalloc(sizeof(struct fw_control_ex), GFP_KERNEL);
+ if (!fw_control_context)
+ return -ENOMEM;
+
+ memcpy(pm8001_ha->memoryMap.region[NVMD].virt_ptr,
+ &ioctl_payload->func_specific,
+ ioctl_payload->wr_length);
+ memset(&nvmd_req, 0, sizeof(nvmd_req));
+
+ ccb = pm8001_ccb_alloc(pm8001_ha, NULL, NULL);
+ if (!ccb) {
+ kfree(fw_control_context);
+ return -SAS_QUEUE_FULL;
+ }
+ ccb->fw_control_context = fw_control_context;
+
+ nvmd_req.tag = cpu_to_le32(ccb->ccb_tag);
+ switch (nvmd_type) {
+ case TWI_DEVICE: {
+ u32 twi_addr, twi_page_size;
+ twi_addr = 0xa8;
+ twi_page_size = 2;
+ nvmd_req.reserved[0] = cpu_to_le32(0xFEDCBA98);
+ nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | twi_addr << 16 |
+ twi_page_size << 8 | TWI_DEVICE);
+ nvmd_req.resp_len = cpu_to_le32(ioctl_payload->wr_length);
+ nvmd_req.resp_addr_hi =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+ nvmd_req.resp_addr_lo =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+ break;
+ }
+ case C_SEEPROM:
+ nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | C_SEEPROM);
+ nvmd_req.resp_len = cpu_to_le32(ioctl_payload->wr_length);
+ nvmd_req.reserved[0] = cpu_to_le32(0xFEDCBA98);
+ nvmd_req.resp_addr_hi =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+ nvmd_req.resp_addr_lo =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+ break;
+ case VPD_FLASH:
+ nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | VPD_FLASH);
+ nvmd_req.resp_len = cpu_to_le32(ioctl_payload->wr_length);
+ nvmd_req.reserved[0] = cpu_to_le32(0xFEDCBA98);
+ nvmd_req.resp_addr_hi =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+ nvmd_req.resp_addr_lo =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+ break;
+ case EXPAN_ROM:
+ nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | EXPAN_ROM);
+ nvmd_req.resp_len = cpu_to_le32(ioctl_payload->wr_length);
+ nvmd_req.reserved[0] = cpu_to_le32(0xFEDCBA98);
+ nvmd_req.resp_addr_hi =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+ nvmd_req.resp_addr_lo =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+ break;
+ default:
+ break;
+ }
+
+ rc = pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &nvmd_req,
+ sizeof(nvmd_req), 0);
+ if (rc) {
+ kfree(fw_control_context);
+ pm8001_ccb_free(pm8001_ha, ccb);
+ }
+ return rc;
+}
+
+/**
+ * pm8001_chip_fw_flash_update_build - support the firmware update operation
+ * @pm8001_ha: our hba card information.
+ * @fw_flash_updata_info: firmware flash update param
+ * @tag: Tag to apply to the payload
+ */
+int
+pm8001_chip_fw_flash_update_build(struct pm8001_hba_info *pm8001_ha,
+ void *fw_flash_updata_info, u32 tag)
+{
+ struct fw_flash_Update_req payload;
+ struct fw_flash_updata_info *info;
+ u32 opc = OPC_INB_FW_FLASH_UPDATE;
+
+ memset(&payload, 0, sizeof(struct fw_flash_Update_req));
+ info = fw_flash_updata_info;
+ payload.tag = cpu_to_le32(tag);
+ payload.cur_image_len = cpu_to_le32(info->cur_image_len);
+ payload.cur_image_offset = cpu_to_le32(info->cur_image_offset);
+ payload.total_image_len = cpu_to_le32(info->total_image_len);
+ payload.len = info->sgl.im_len.len ;
+ payload.sgl_addr_lo =
+ cpu_to_le32(lower_32_bits(le64_to_cpu(info->sgl.addr)));
+ payload.sgl_addr_hi =
+ cpu_to_le32(upper_32_bits(le64_to_cpu(info->sgl.addr)));
+
+ return pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &payload,
+ sizeof(payload), 0);
+}
+
+int
+pm8001_chip_fw_flash_update_req(struct pm8001_hba_info *pm8001_ha,
+ void *payload)
+{
+ struct fw_flash_updata_info flash_update_info;
+ struct fw_control_info *fw_control;
+ struct fw_control_ex *fw_control_context;
+ int rc;
+ struct pm8001_ccb_info *ccb;
+ void *buffer = pm8001_ha->memoryMap.region[FW_FLASH].virt_ptr;
+ dma_addr_t phys_addr = pm8001_ha->memoryMap.region[FW_FLASH].phys_addr;
+ struct pm8001_ioctl_payload *ioctl_payload = payload;
+
+ fw_control_context = kzalloc(sizeof(struct fw_control_ex), GFP_KERNEL);
+ if (!fw_control_context)
+ return -ENOMEM;
+ fw_control = (struct fw_control_info *)&ioctl_payload->func_specific;
+ pm8001_dbg(pm8001_ha, DEVIO,
+ "dma fw_control context input length :%x\n",
+ fw_control->len);
+ memcpy(buffer, fw_control->buffer, fw_control->len);
+ flash_update_info.sgl.addr = cpu_to_le64(phys_addr);
+ flash_update_info.sgl.im_len.len = cpu_to_le32(fw_control->len);
+ flash_update_info.sgl.im_len.e = 0;
+ flash_update_info.cur_image_offset = fw_control->offset;
+ flash_update_info.cur_image_len = fw_control->len;
+ flash_update_info.total_image_len = fw_control->size;
+ fw_control_context->fw_control = fw_control;
+ fw_control_context->virtAddr = buffer;
+ fw_control_context->phys_addr = phys_addr;
+ fw_control_context->len = fw_control->len;
+
+ ccb = pm8001_ccb_alloc(pm8001_ha, NULL, NULL);
+ if (!ccb) {
+ kfree(fw_control_context);
+ return -SAS_QUEUE_FULL;
+ }
+ ccb->fw_control_context = fw_control_context;
+
+ rc = pm8001_chip_fw_flash_update_build(pm8001_ha, &flash_update_info,
+ ccb->ccb_tag);
+ if (rc) {
+ kfree(fw_control_context);
+ pm8001_ccb_free(pm8001_ha, ccb);
+ }
+
+ return rc;
+}
+
+ssize_t
+pm8001_get_gsm_dump(struct device *cdev, u32 length, char *buf)
+{
+ u32 value, rem, offset = 0, bar = 0;
+ u32 index, work_offset, dw_length;
+ u32 shift_value, gsm_base, gsm_dump_offset;
+ char *direct_data;
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+ direct_data = buf;
+ gsm_dump_offset = pm8001_ha->fatal_forensic_shift_offset;
+
+ /* check max is 1 Mbytes */
+ if ((length > 0x100000) || (gsm_dump_offset & 3) ||
+ ((gsm_dump_offset + length) > 0x1000000))
+ return -EINVAL;
+
+ if (pm8001_ha->chip_id == chip_8001)
+ bar = 2;
+ else
+ bar = 1;
+
+ work_offset = gsm_dump_offset & 0xFFFF0000;
+ offset = gsm_dump_offset & 0x0000FFFF;
+ gsm_dump_offset = work_offset;
+ /* adjust length to dword boundary */
+ rem = length & 3;
+ dw_length = length >> 2;
+
+ for (index = 0; index < dw_length; index++) {
+ if ((work_offset + offset) & 0xFFFF0000) {
+ if (pm8001_ha->chip_id == chip_8001)
+ shift_value = ((gsm_dump_offset + offset) &
+ SHIFT_REG_64K_MASK);
+ else
+ shift_value = (((gsm_dump_offset + offset) &
+ SHIFT_REG_64K_MASK) >>
+ SHIFT_REG_BIT_SHIFT);
+
+ if (pm8001_ha->chip_id == chip_8001) {
+ gsm_base = GSM_BASE;
+ if (-1 == pm8001_bar4_shift(pm8001_ha,
+ (gsm_base + shift_value)))
+ return -EIO;
+ } else {
+ gsm_base = 0;
+ if (-1 == pm80xx_bar4_shift(pm8001_ha,
+ (gsm_base + shift_value)))
+ return -EIO;
+ }
+ gsm_dump_offset = (gsm_dump_offset + offset) &
+ 0xFFFF0000;
+ work_offset = 0;
+ offset = offset & 0x0000FFFF;
+ }
+ value = pm8001_cr32(pm8001_ha, bar, (work_offset + offset) &
+ 0x0000FFFF);
+ direct_data += sprintf(direct_data, "%08x ", value);
+ offset += 4;
+ }
+ if (rem != 0) {
+ value = pm8001_cr32(pm8001_ha, bar, (work_offset + offset) &
+ 0x0000FFFF);
+ /* xfr for non_dw */
+ direct_data += sprintf(direct_data, "%08x ", value);
+ }
+ /* Shift back to BAR4 original address */
+ if (-1 == pm8001_bar4_shift(pm8001_ha, 0))
+ return -EIO;
+ pm8001_ha->fatal_forensic_shift_offset += 1024;
+
+ if (pm8001_ha->fatal_forensic_shift_offset >= 0x100000)
+ pm8001_ha->fatal_forensic_shift_offset = 0;
+ return direct_data - buf;
+}
+
+int
+pm8001_chip_set_dev_state_req(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_device *pm8001_dev, u32 state)
+{
+ struct set_dev_state_req payload;
+ struct pm8001_ccb_info *ccb;
+ int rc;
+ u32 opc = OPC_INB_SET_DEVICE_STATE;
+
+ memset(&payload, 0, sizeof(payload));
+
+ ccb = pm8001_ccb_alloc(pm8001_ha, pm8001_dev, NULL);
+ if (!ccb)
+ return -SAS_QUEUE_FULL;
+
+ payload.tag = cpu_to_le32(ccb->ccb_tag);
+ payload.device_id = cpu_to_le32(pm8001_dev->device_id);
+ payload.nds = cpu_to_le32(state);
+
+ rc = pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &payload,
+ sizeof(payload), 0);
+ if (rc)
+ pm8001_ccb_free(pm8001_ha, ccb);
+
+ return rc;
+}
+
+static int
+pm8001_chip_sas_re_initialization(struct pm8001_hba_info *pm8001_ha)
+{
+ struct sas_re_initialization_req payload;
+ struct pm8001_ccb_info *ccb;
+ int rc;
+ u32 opc = OPC_INB_SAS_RE_INITIALIZE;
+
+ memset(&payload, 0, sizeof(payload));
+
+ ccb = pm8001_ccb_alloc(pm8001_ha, NULL, NULL);
+ if (!ccb)
+ return -SAS_QUEUE_FULL;
+
+ payload.tag = cpu_to_le32(ccb->ccb_tag);
+ payload.SSAHOLT = cpu_to_le32(0xd << 25);
+ payload.sata_hol_tmo = cpu_to_le32(80);
+ payload.open_reject_cmdretries_data_retries = cpu_to_le32(0xff00ff);
+
+ rc = pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &payload,
+ sizeof(payload), 0);
+ if (rc)
+ pm8001_ccb_free(pm8001_ha, ccb);
+
+ return rc;
+}
+
+const struct pm8001_dispatch pm8001_8001_dispatch = {
+ .name = "pmc8001",
+ .chip_init = pm8001_chip_init,
+ .chip_post_init = pm8001_chip_post_init,
+ .chip_soft_rst = pm8001_chip_soft_rst,
+ .chip_rst = pm8001_hw_chip_rst,
+ .chip_iounmap = pm8001_chip_iounmap,
+ .isr = pm8001_chip_isr,
+ .is_our_interrupt = pm8001_chip_is_our_interrupt,
+ .isr_process_oq = process_oq,
+ .interrupt_enable = pm8001_chip_interrupt_enable,
+ .interrupt_disable = pm8001_chip_interrupt_disable,
+ .make_prd = pm8001_chip_make_sg,
+ .smp_req = pm8001_chip_smp_req,
+ .ssp_io_req = pm8001_chip_ssp_io_req,
+ .sata_req = pm8001_chip_sata_req,
+ .phy_start_req = pm8001_chip_phy_start_req,
+ .phy_stop_req = pm8001_chip_phy_stop_req,
+ .reg_dev_req = pm8001_chip_reg_dev_req,
+ .dereg_dev_req = pm8001_chip_dereg_dev_req,
+ .phy_ctl_req = pm8001_chip_phy_ctl_req,
+ .task_abort = pm8001_chip_abort_task,
+ .ssp_tm_req = pm8001_chip_ssp_tm_req,
+ .get_nvmd_req = pm8001_chip_get_nvmd_req,
+ .set_nvmd_req = pm8001_chip_set_nvmd_req,
+ .fw_flash_update_req = pm8001_chip_fw_flash_update_req,
+ .set_dev_state_req = pm8001_chip_set_dev_state_req,
+ .sas_re_init_req = pm8001_chip_sas_re_initialization,
+ .fatal_errors = pm80xx_fatal_errors,
+};
diff --git a/drivers/scsi/pm8001/pm8001_hwi.h b/drivers/scsi/pm8001/pm8001_hwi.h
new file mode 100644
index 0000000000..fc2127dcb5
--- /dev/null
+++ b/drivers/scsi/pm8001/pm8001_hwi.h
@@ -0,0 +1,1030 @@
+/*
+ * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+#ifndef _PMC8001_REG_H_
+#define _PMC8001_REG_H_
+
+#include <linux/types.h>
+#include <scsi/libsas.h>
+
+
+/* for Request Opcode of IOMB */
+#define OPC_INB_ECHO 1 /* 0x000 */
+#define OPC_INB_PHYSTART 4 /* 0x004 */
+#define OPC_INB_PHYSTOP 5 /* 0x005 */
+#define OPC_INB_SSPINIIOSTART 6 /* 0x006 */
+#define OPC_INB_SSPINITMSTART 7 /* 0x007 */
+#define OPC_INB_SSPINIEXTIOSTART 8 /* 0x008 */
+#define OPC_INB_DEV_HANDLE_ACCEPT 9 /* 0x009 */
+#define OPC_INB_SSPTGTIOSTART 10 /* 0x00A */
+#define OPC_INB_SSPTGTRSPSTART 11 /* 0x00B */
+#define OPC_INB_SSPINIEDCIOSTART 12 /* 0x00C */
+#define OPC_INB_SSPINIEXTEDCIOSTART 13 /* 0x00D */
+#define OPC_INB_SSPTGTEDCIOSTART 14 /* 0x00E */
+#define OPC_INB_SSP_ABORT 15 /* 0x00F */
+#define OPC_INB_DEREG_DEV_HANDLE 16 /* 0x010 */
+#define OPC_INB_GET_DEV_HANDLE 17 /* 0x011 */
+#define OPC_INB_SMP_REQUEST 18 /* 0x012 */
+/* SMP_RESPONSE is removed */
+#define OPC_INB_SMP_RESPONSE 19 /* 0x013 */
+#define OPC_INB_SMP_ABORT 20 /* 0x014 */
+#define OPC_INB_REG_DEV 22 /* 0x016 */
+#define OPC_INB_SATA_HOST_OPSTART 23 /* 0x017 */
+#define OPC_INB_SATA_ABORT 24 /* 0x018 */
+#define OPC_INB_LOCAL_PHY_CONTROL 25 /* 0x019 */
+#define OPC_INB_GET_DEV_INFO 26 /* 0x01A */
+#define OPC_INB_FW_FLASH_UPDATE 32 /* 0x020 */
+#define OPC_INB_GPIO 34 /* 0x022 */
+#define OPC_INB_SAS_DIAG_MODE_START_END 35 /* 0x023 */
+#define OPC_INB_SAS_DIAG_EXECUTE 36 /* 0x024 */
+#define OPC_INB_SAS_HW_EVENT_ACK 37 /* 0x025 */
+#define OPC_INB_GET_TIME_STAMP 38 /* 0x026 */
+#define OPC_INB_PORT_CONTROL 39 /* 0x027 */
+#define OPC_INB_GET_NVMD_DATA 40 /* 0x028 */
+#define OPC_INB_SET_NVMD_DATA 41 /* 0x029 */
+#define OPC_INB_SET_DEVICE_STATE 42 /* 0x02A */
+#define OPC_INB_GET_DEVICE_STATE 43 /* 0x02B */
+#define OPC_INB_SET_DEV_INFO 44 /* 0x02C */
+#define OPC_INB_SAS_RE_INITIALIZE 45 /* 0x02D */
+
+/* for Response Opcode of IOMB */
+#define OPC_OUB_ECHO 1 /* 0x001 */
+#define OPC_OUB_HW_EVENT 4 /* 0x004 */
+#define OPC_OUB_SSP_COMP 5 /* 0x005 */
+#define OPC_OUB_SMP_COMP 6 /* 0x006 */
+#define OPC_OUB_LOCAL_PHY_CNTRL 7 /* 0x007 */
+#define OPC_OUB_DEV_REGIST 10 /* 0x00A */
+#define OPC_OUB_DEREG_DEV 11 /* 0x00B */
+#define OPC_OUB_GET_DEV_HANDLE 12 /* 0x00C */
+#define OPC_OUB_SATA_COMP 13 /* 0x00D */
+#define OPC_OUB_SATA_EVENT 14 /* 0x00E */
+#define OPC_OUB_SSP_EVENT 15 /* 0x00F */
+#define OPC_OUB_DEV_HANDLE_ARRIV 16 /* 0x010 */
+/* SMP_RECEIVED Notification is removed */
+#define OPC_OUB_SMP_RECV_EVENT 17 /* 0x011 */
+#define OPC_OUB_SSP_RECV_EVENT 18 /* 0x012 */
+#define OPC_OUB_DEV_INFO 19 /* 0x013 */
+#define OPC_OUB_FW_FLASH_UPDATE 20 /* 0x014 */
+#define OPC_OUB_GPIO_RESPONSE 22 /* 0x016 */
+#define OPC_OUB_GPIO_EVENT 23 /* 0x017 */
+#define OPC_OUB_GENERAL_EVENT 24 /* 0x018 */
+#define OPC_OUB_SSP_ABORT_RSP 26 /* 0x01A */
+#define OPC_OUB_SATA_ABORT_RSP 27 /* 0x01B */
+#define OPC_OUB_SAS_DIAG_MODE_START_END 28 /* 0x01C */
+#define OPC_OUB_SAS_DIAG_EXECUTE 29 /* 0x01D */
+#define OPC_OUB_GET_TIME_STAMP 30 /* 0x01E */
+#define OPC_OUB_SAS_HW_EVENT_ACK 31 /* 0x01F */
+#define OPC_OUB_PORT_CONTROL 32 /* 0x020 */
+#define OPC_OUB_SKIP_ENTRY 33 /* 0x021 */
+#define OPC_OUB_SMP_ABORT_RSP 34 /* 0x022 */
+#define OPC_OUB_GET_NVMD_DATA 35 /* 0x023 */
+#define OPC_OUB_SET_NVMD_DATA 36 /* 0x024 */
+#define OPC_OUB_DEVICE_HANDLE_REMOVAL 37 /* 0x025 */
+#define OPC_OUB_SET_DEVICE_STATE 38 /* 0x026 */
+#define OPC_OUB_GET_DEVICE_STATE 39 /* 0x027 */
+#define OPC_OUB_SET_DEV_INFO 40 /* 0x028 */
+#define OPC_OUB_SAS_RE_INITIALIZE 41 /* 0x029 */
+
+/* for phy start*/
+#define SPINHOLD_DISABLE (0x00 << 14)
+#define SPINHOLD_ENABLE (0x01 << 14)
+#define LINKMODE_SAS (0x01 << 12)
+#define LINKMODE_DSATA (0x02 << 12)
+#define LINKMODE_AUTO (0x03 << 12)
+#define LINKRATE_15 (0x01 << 8)
+#define LINKRATE_30 (0x02 << 8)
+#define LINKRATE_60 (0x04 << 8)
+
+/* for new SPC controllers MEMBASE III is shared between BIOS and DATA */
+#define GSM_SM_BASE 0x4F0000
+struct mpi_msg_hdr{
+ __le32 header; /* Bits [11:0] - Message operation code */
+ /* Bits [15:12] - Message Category */
+ /* Bits [21:16] - Outboundqueue ID for the
+ operation completion message */
+ /* Bits [23:22] - Reserved */
+ /* Bits [28:24] - Buffer Count, indicates how
+ many buffer are allocated for the massage */
+ /* Bits [30:29] - Reserved */
+ /* Bits [31] - Message Valid bit */
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of PHY Start Command
+ * use to describe enable the phy (64 bytes)
+ */
+struct phy_start_req {
+ __le32 tag;
+ __le32 ase_sh_lm_slr_phyid;
+ struct sas_identify_frame sas_identify;
+ u32 reserved[5];
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of PHY Start Command
+ * use to disable the phy (64 bytes)
+ */
+struct phy_stop_req {
+ __le32 tag;
+ __le32 phy_id;
+ u32 reserved[13];
+} __attribute__((packed, aligned(4)));
+
+
+/* set device bits fis - device to host */
+struct set_dev_bits_fis {
+ u8 fis_type; /* 0xA1*/
+ u8 n_i_pmport;
+ /* b7 : n Bit. Notification bit. If set device needs attention. */
+ /* b6 : i Bit. Interrupt Bit */
+ /* b5-b4: reserved2 */
+ /* b3-b0: PM Port */
+ u8 status;
+ u8 error;
+ u32 _r_a;
+} __attribute__ ((packed));
+/* PIO setup FIS - device to host */
+struct pio_setup_fis {
+ u8 fis_type; /* 0x5f */
+ u8 i_d_pmPort;
+ /* b7 : reserved */
+ /* b6 : i bit. Interrupt bit */
+ /* b5 : d bit. data transfer direction. set to 1 for device to host
+ xfer */
+ /* b4 : reserved */
+ /* b3-b0: PM Port */
+ u8 status;
+ u8 error;
+ u8 lbal;
+ u8 lbam;
+ u8 lbah;
+ u8 device;
+ u8 lbal_exp;
+ u8 lbam_exp;
+ u8 lbah_exp;
+ u8 _r_a;
+ u8 sector_count;
+ u8 sector_count_exp;
+ u8 _r_b;
+ u8 e_status;
+ u8 _r_c[2];
+ u8 transfer_count;
+} __attribute__ ((packed));
+
+/*
+ * brief the data structure of SATA Completion Response
+ * use to describe the sata task response (64 bytes)
+ */
+struct sata_completion_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 param;
+ u32 sata_resp[12];
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of SAS HW Event Notification
+ * use to alert the host about the hardware event(64 bytes)
+ */
+struct hw_event_resp {
+ __le32 lr_evt_status_phyid_portid;
+ __le32 evt_param;
+ __le32 npip_portstate;
+ struct sas_identify_frame sas_identify;
+ struct dev_to_host_fis sata_fis;
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of REGISTER DEVICE Command
+ * use to describe MPI REGISTER DEVICE Command (64 bytes)
+ */
+
+struct reg_dev_req {
+ __le32 tag;
+ __le32 phyid_portid;
+ __le32 dtype_dlr_retry;
+ __le32 firstburstsize_ITNexustimeout;
+ u8 sas_addr[SAS_ADDR_SIZE];
+ __le32 upper_device_id;
+ u32 reserved[8];
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of DEREGISTER DEVICE Command
+ * use to request spc to remove all internal resources associated
+ * with the device id (64 bytes)
+ */
+
+struct dereg_dev_req {
+ __le32 tag;
+ __le32 device_id;
+ u32 reserved[13];
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of DEVICE_REGISTRATION Response
+ * use to notify the completion of the device registration (64 bytes)
+ */
+
+struct dev_reg_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 device_id;
+ u32 reserved[12];
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of Local PHY Control Command
+ * use to issue PHY CONTROL to local phy (64 bytes)
+ */
+struct local_phy_ctl_req {
+ __le32 tag;
+ __le32 phyop_phyid;
+ u32 reserved1[13];
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of Local Phy Control Response
+ * use to describe MPI Local Phy Control Response (64 bytes)
+ */
+struct local_phy_ctl_resp {
+ __le32 tag;
+ __le32 phyop_phyid;
+ __le32 status;
+ u32 reserved[12];
+} __attribute__((packed, aligned(4)));
+
+
+#define OP_BITS 0x0000FF00
+#define ID_BITS 0x000000FF
+
+/*
+ * brief the data structure of PORT Control Command
+ * use to control port properties (64 bytes)
+ */
+
+struct port_ctl_req {
+ __le32 tag;
+ __le32 portop_portid;
+ __le32 param0;
+ __le32 param1;
+ u32 reserved1[11];
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of HW Event Ack Command
+ * use to acknowledge receive HW event (64 bytes)
+ */
+
+struct hw_event_ack_req {
+ __le32 tag;
+ __le32 sea_phyid_portid;
+ __le32 param0;
+ __le32 param1;
+ u32 reserved1[11];
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of SSP Completion Response
+ * use to indicate a SSP Completion (n bytes)
+ */
+struct ssp_completion_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 param;
+ __le32 ssptag_rescv_rescpad;
+ struct ssp_response_iu ssp_resp_iu;
+ __le32 residual_count;
+} __attribute__((packed, aligned(4)));
+
+
+#define SSP_RESCV_BIT 0x00010000
+
+/*
+ * brief the data structure of SATA EVNET esponse
+ * use to indicate a SATA Completion (64 bytes)
+ */
+
+struct sata_event_resp {
+ __le32 tag;
+ __le32 event;
+ __le32 port_id;
+ __le32 device_id;
+ u32 reserved[11];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of SSP EVNET esponse
+ * use to indicate a SSP Completion (64 bytes)
+ */
+
+struct ssp_event_resp {
+ __le32 tag;
+ __le32 event;
+ __le32 port_id;
+ __le32 device_id;
+ u32 reserved[11];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of General Event Notification Response
+ * use to describe MPI General Event Notification Response (64 bytes)
+ */
+struct general_event_resp {
+ __le32 status;
+ __le32 inb_IOMB_payload[14];
+} __attribute__((packed, aligned(4)));
+
+
+#define GENERAL_EVENT_PAYLOAD 14
+#define OPCODE_BITS 0x00000fff
+
+/*
+ * brief the data structure of SMP Request Command
+ * use to describe MPI SMP REQUEST Command (64 bytes)
+ */
+struct smp_req {
+ __le32 tag;
+ __le32 device_id;
+ __le32 len_ip_ir;
+ /* Bits [0] - Indirect response */
+ /* Bits [1] - Indirect Payload */
+ /* Bits [15:2] - Reserved */
+ /* Bits [23:16] - direct payload Len */
+ /* Bits [31:24] - Reserved */
+ u8 smp_req16[16];
+ union {
+ u8 smp_req[32];
+ struct {
+ __le64 long_req_addr;/* sg dma address, LE */
+ __le32 long_req_size;/* LE */
+ u32 _r_a;
+ __le64 long_resp_addr;/* sg dma address, LE */
+ __le32 long_resp_size;/* LE */
+ u32 _r_b;
+ } long_smp_req;/* sequencer extension */
+ };
+} __attribute__((packed, aligned(4)));
+/*
+ * brief the data structure of SMP Completion Response
+ * use to describe MPI SMP Completion Response (64 bytes)
+ */
+struct smp_completion_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 param;
+ __le32 _r_a[12];
+} __attribute__((packed, aligned(4)));
+
+/*
+ *brief the data structure of SSP SMP SATA Abort Command
+ * use to describe MPI SSP SMP & SATA Abort Command (64 bytes)
+ */
+struct task_abort_req {
+ __le32 tag;
+ __le32 device_id;
+ __le32 tag_to_abort;
+ __le32 abort_all;
+ u32 reserved[11];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of SSP SATA SMP Abort Response
+ * use to describe SSP SMP & SATA Abort Response ( 64 bytes)
+ */
+struct task_abort_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 scp;
+ u32 reserved[12];
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of SAS Diagnostic Start/End Command
+ * use to describe MPI SAS Diagnostic Start/End Command (64 bytes)
+ */
+struct sas_diag_start_end_req {
+ __le32 tag;
+ __le32 operation_phyid;
+ u32 reserved[13];
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of SAS Diagnostic Execute Command
+ * use to describe MPI SAS Diagnostic Execute Command (64 bytes)
+ */
+struct sas_diag_execute_req{
+ __le32 tag;
+ __le32 cmdtype_cmddesc_phyid;
+ __le32 pat1_pat2;
+ __le32 threshold;
+ __le32 codepat_errmsk;
+ __le32 pmon;
+ __le32 pERF1CTL;
+ u32 reserved[8];
+} __attribute__((packed, aligned(4)));
+
+
+#define SAS_DIAG_PARAM_BYTES 24
+
+/*
+ * brief the data structure of Set Device State Command
+ * use to describe MPI Set Device State Command (64 bytes)
+ */
+struct set_dev_state_req {
+ __le32 tag;
+ __le32 device_id;
+ __le32 nds;
+ u32 reserved[12];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of sas_re_initialization
+ */
+struct sas_re_initialization_req {
+
+ __le32 tag;
+ __le32 SSAHOLT;/* bit29-set max port;
+ ** bit28-set open reject cmd retries.
+ ** bit27-set open reject data retries.
+ ** bit26-set open reject option, remap:1 or not:0.
+ ** bit25-set sata head of line time out.
+ */
+ __le32 reserved_maxPorts;
+ __le32 open_reject_cmdretries_data_retries;/* cmd retries: 31-bit16;
+ * data retries: bit15-bit0.
+ */
+ __le32 sata_hol_tmo;
+ u32 reserved1[10];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of SATA Start Command
+ * use to describe MPI SATA IO Start Command (64 bytes)
+ */
+
+struct sata_start_req {
+ __le32 tag;
+ __le32 device_id;
+ __le32 data_len;
+ __le32 retfis_ncqtag_atap_dir_m;
+ struct host_to_dev_fis sata_fis;
+ u32 reserved1;
+ u32 reserved2;
+ u32 addr_low;
+ u32 addr_high;
+ __le32 len;
+ __le32 esgl;
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of SSP INI TM Start Command
+ * use to describe MPI SSP INI TM Start Command (64 bytes)
+ */
+struct ssp_ini_tm_start_req {
+ __le32 tag;
+ __le32 device_id;
+ __le32 relate_tag;
+ __le32 tmf;
+ u8 lun[8];
+ __le32 ds_ads_m;
+ u32 reserved[8];
+} __attribute__((packed, aligned(4)));
+
+
+struct ssp_info_unit {
+ u8 lun[8];/* SCSI Logical Unit Number */
+ u8 reserved1;/* reserved */
+ u8 efb_prio_attr;
+ /* B7 : enabledFirstBurst */
+ /* B6-3 : taskPriority */
+ /* B2-0 : taskAttribute */
+ u8 reserved2; /* reserved */
+ u8 additional_cdb_len;
+ /* B7-2 : additional_cdb_len */
+ /* B1-0 : reserved */
+ u8 cdb[16];/* The SCSI CDB up to 16 bytes length */
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of SSP INI IO Start Command
+ * use to describe MPI SSP INI IO Start Command (64 bytes)
+ */
+struct ssp_ini_io_start_req {
+ __le32 tag;
+ __le32 device_id;
+ __le32 data_len;
+ __le32 dir_m_tlr;
+ struct ssp_info_unit ssp_iu;
+ __le32 addr_low;
+ __le32 addr_high;
+ __le32 len;
+ __le32 esgl;
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of Firmware download
+ * use to describe MPI FW DOWNLOAD Command (64 bytes)
+ */
+struct fw_flash_Update_req {
+ __le32 tag;
+ __le32 cur_image_offset;
+ __le32 cur_image_len;
+ __le32 total_image_len;
+ u32 reserved0[7];
+ __le32 sgl_addr_lo;
+ __le32 sgl_addr_hi;
+ __le32 len;
+ __le32 ext_reserved;
+} __attribute__((packed, aligned(4)));
+
+
+#define FWFLASH_IOMB_RESERVED_LEN 0x07
+/**
+ * brief the data structure of FW_FLASH_UPDATE Response
+ * use to describe MPI FW_FLASH_UPDATE Response (64 bytes)
+ *
+ */
+struct fw_flash_Update_resp {
+ __le32 tag;
+ __le32 status;
+ u32 reserved[13];
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of Get NVM Data Command
+ * use to get data from NVM in HBA(64 bytes)
+ */
+struct get_nvm_data_req {
+ __le32 tag;
+ __le32 len_ir_vpdd;
+ __le32 vpd_offset;
+ u32 reserved[8];
+ __le32 resp_addr_lo;
+ __le32 resp_addr_hi;
+ __le32 resp_len;
+ u32 reserved1;
+} __attribute__((packed, aligned(4)));
+
+
+struct set_nvm_data_req {
+ __le32 tag;
+ __le32 len_ir_vpdd;
+ __le32 vpd_offset;
+ __le32 reserved[8];
+ __le32 resp_addr_lo;
+ __le32 resp_addr_hi;
+ __le32 resp_len;
+ u32 reserved1;
+} __attribute__((packed, aligned(4)));
+
+
+#define TWI_DEVICE 0x0
+#define C_SEEPROM 0x1
+#define VPD_FLASH 0x4
+#define AAP1_RDUMP 0x5
+#define IOP_RDUMP 0x6
+#define EXPAN_ROM 0x7
+
+#define IPMode 0x80000000
+#define NVMD_TYPE 0x0000000F
+#define NVMD_STAT 0x0000FFFF
+#define NVMD_LEN 0xFF000000
+/**
+ * brief the data structure of Get NVMD Data Response
+ * use to describe MPI Get NVMD Data Response (64 bytes)
+ */
+struct get_nvm_data_resp {
+ __le32 tag;
+ __le32 ir_tda_bn_dps_das_nvm;
+ __le32 dlen_status;
+ __le32 nvm_data[12];
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of SAS Diagnostic Start/End Response
+ * use to describe MPI SAS Diagnostic Start/End Response (64 bytes)
+ *
+ */
+struct sas_diag_start_end_resp {
+ __le32 tag;
+ __le32 status;
+ u32 reserved[13];
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of SAS Diagnostic Execute Response
+ * use to describe MPI SAS Diagnostic Execute Response (64 bytes)
+ *
+ */
+struct sas_diag_execute_resp {
+ __le32 tag;
+ __le32 cmdtype_cmddesc_phyid;
+ __le32 Status;
+ __le32 ReportData;
+ u32 reserved[11];
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of Set Device State Response
+ * use to describe MPI Set Device State Response (64 bytes)
+ *
+ */
+struct set_dev_state_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 device_id;
+ __le32 pds_nds;
+ u32 reserved[11];
+} __attribute__((packed, aligned(4)));
+
+
+#define NDS_BITS 0x0F
+#define PDS_BITS 0xF0
+
+/*
+ * HW Events type
+ */
+
+#define HW_EVENT_RESET_START 0x01
+#define HW_EVENT_CHIP_RESET_COMPLETE 0x02
+#define HW_EVENT_PHY_STOP_STATUS 0x03
+#define HW_EVENT_SAS_PHY_UP 0x04
+#define HW_EVENT_SATA_PHY_UP 0x05
+#define HW_EVENT_SATA_SPINUP_HOLD 0x06
+#define HW_EVENT_PHY_DOWN 0x07
+#define HW_EVENT_PORT_INVALID 0x08
+#define HW_EVENT_BROADCAST_CHANGE 0x09
+#define HW_EVENT_PHY_ERROR 0x0A
+#define HW_EVENT_BROADCAST_SES 0x0B
+#define HW_EVENT_INBOUND_CRC_ERROR 0x0C
+#define HW_EVENT_HARD_RESET_RECEIVED 0x0D
+#define HW_EVENT_MALFUNCTION 0x0E
+#define HW_EVENT_ID_FRAME_TIMEOUT 0x0F
+#define HW_EVENT_BROADCAST_EXP 0x10
+#define HW_EVENT_PHY_START_STATUS 0x11
+#define HW_EVENT_LINK_ERR_INVALID_DWORD 0x12
+#define HW_EVENT_LINK_ERR_DISPARITY_ERROR 0x13
+#define HW_EVENT_LINK_ERR_CODE_VIOLATION 0x14
+#define HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH 0x15
+#define HW_EVENT_LINK_ERR_PHY_RESET_FAILED 0x16
+#define HW_EVENT_PORT_RECOVERY_TIMER_TMO 0x17
+#define HW_EVENT_PORT_RECOVER 0x18
+#define HW_EVENT_PORT_RESET_TIMER_TMO 0x19
+#define HW_EVENT_PORT_RESET_COMPLETE 0x20
+#define EVENT_BROADCAST_ASYNCH_EVENT 0x21
+
+/* port state */
+#define PORT_NOT_ESTABLISHED 0x00
+#define PORT_VALID 0x01
+#define PORT_LOSTCOMM 0x02
+#define PORT_IN_RESET 0x04
+#define PORT_INVALID 0x08
+
+/*
+ * SSP/SMP/SATA IO Completion Status values
+ */
+
+#define IO_SUCCESS 0x00
+#define IO_ABORTED 0x01
+#define IO_OVERFLOW 0x02
+#define IO_UNDERFLOW 0x03
+#define IO_FAILED 0x04
+#define IO_ABORT_RESET 0x05
+#define IO_NOT_VALID 0x06
+#define IO_NO_DEVICE 0x07
+#define IO_ILLEGAL_PARAMETER 0x08
+#define IO_LINK_FAILURE 0x09
+#define IO_PROG_ERROR 0x0A
+#define IO_EDC_IN_ERROR 0x0B
+#define IO_EDC_OUT_ERROR 0x0C
+#define IO_ERROR_HW_TIMEOUT 0x0D
+#define IO_XFER_ERROR_BREAK 0x0E
+#define IO_XFER_ERROR_PHY_NOT_READY 0x0F
+#define IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED 0x10
+#define IO_OPEN_CNX_ERROR_ZONE_VIOLATION 0x11
+#define IO_OPEN_CNX_ERROR_BREAK 0x12
+#define IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS 0x13
+#define IO_OPEN_CNX_ERROR_BAD_DESTINATION 0x14
+#define IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED 0x15
+#define IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY 0x16
+#define IO_OPEN_CNX_ERROR_WRONG_DESTINATION 0x17
+#define IO_OPEN_CNX_ERROR_UNKNOWN_ERROR 0x18
+#define IO_XFER_ERROR_NAK_RECEIVED 0x19
+#define IO_XFER_ERROR_ACK_NAK_TIMEOUT 0x1A
+#define IO_XFER_ERROR_PEER_ABORTED 0x1B
+#define IO_XFER_ERROR_RX_FRAME 0x1C
+#define IO_XFER_ERROR_DMA 0x1D
+#define IO_XFER_ERROR_CREDIT_TIMEOUT 0x1E
+#define IO_XFER_ERROR_SATA_LINK_TIMEOUT 0x1F
+#define IO_XFER_ERROR_SATA 0x20
+#define IO_XFER_ERROR_ABORTED_DUE_TO_SRST 0x22
+#define IO_XFER_ERROR_REJECTED_NCQ_MODE 0x21
+#define IO_XFER_ERROR_ABORTED_NCQ_MODE 0x23
+#define IO_XFER_OPEN_RETRY_TIMEOUT 0x24
+#define IO_XFER_SMP_RESP_CONNECTION_ERROR 0x25
+#define IO_XFER_ERROR_UNEXPECTED_PHASE 0x26
+#define IO_XFER_ERROR_XFER_RDY_OVERRUN 0x27
+#define IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED 0x28
+
+#define IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT 0x30
+#define IO_XFER_ERROR_CMD_ISSUE_BREAK_BEFORE_ACK_NAK 0x31
+#define IO_XFER_ERROR_CMD_ISSUE_PHY_DOWN_BEFORE_ACK_NAK 0x32
+
+#define IO_XFER_ERROR_OFFSET_MISMATCH 0x34
+#define IO_XFER_ERROR_XFER_ZERO_DATA_LEN 0x35
+#define IO_XFER_CMD_FRAME_ISSUED 0x36
+#define IO_ERROR_INTERNAL_SMP_RESOURCE 0x37
+#define IO_PORT_IN_RESET 0x38
+#define IO_DS_NON_OPERATIONAL 0x39
+#define IO_DS_IN_RECOVERY 0x3A
+#define IO_TM_TAG_NOT_FOUND 0x3B
+#define IO_XFER_PIO_SETUP_ERROR 0x3C
+#define IO_SSP_EXT_IU_ZERO_LEN_ERROR 0x3D
+#define IO_DS_IN_ERROR 0x3E
+#define IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY 0x3F
+#define IO_ABORT_IN_PROGRESS 0x40
+#define IO_ABORT_DELAYED 0x41
+#define IO_INVALID_LENGTH 0x42
+#define IO_FATAL_ERROR 0x51
+
+/* WARNING: This error code must always be the last number.
+ * If you add error code, modify this code also
+ * It is used as an index
+ */
+#define IO_ERROR_UNKNOWN_GENERIC 0x43
+
+/* MSGU CONFIGURATION TABLE*/
+
+#define SPC_MSGU_CFG_TABLE_UPDATE 0x01/* Inbound doorbell bit0 */
+#define SPC_MSGU_CFG_TABLE_RESET 0x02/* Inbound doorbell bit1 */
+#define SPC_MSGU_CFG_TABLE_FREEZE 0x04/* Inbound doorbell bit2 */
+#define SPC_MSGU_CFG_TABLE_UNFREEZE 0x08/* Inbound doorbell bit4 */
+#define MSGU_IBDB_SET 0x04
+#define MSGU_HOST_INT_STATUS 0x08
+#define MSGU_HOST_INT_MASK 0x0C
+#define MSGU_IOPIB_INT_STATUS 0x18
+#define MSGU_IOPIB_INT_MASK 0x1C
+#define MSGU_IBDB_CLEAR 0x20/* RevB - Host not use */
+#define MSGU_MSGU_CONTROL 0x24
+#define MSGU_ODR 0x3C/* RevB */
+#define MSGU_ODCR 0x40/* RevB */
+#define MSGU_SCRATCH_PAD_0 0x44
+#define MSGU_SCRATCH_PAD_1 0x48
+#define MSGU_SCRATCH_PAD_2 0x4C
+#define MSGU_SCRATCH_PAD_3 0x50
+#define MSGU_HOST_SCRATCH_PAD_0 0x54
+#define MSGU_HOST_SCRATCH_PAD_1 0x58
+#define MSGU_HOST_SCRATCH_PAD_2 0x5C
+#define MSGU_HOST_SCRATCH_PAD_3 0x60
+#define MSGU_HOST_SCRATCH_PAD_4 0x64
+#define MSGU_HOST_SCRATCH_PAD_5 0x68
+#define MSGU_HOST_SCRATCH_PAD_6 0x6C
+#define MSGU_HOST_SCRATCH_PAD_7 0x70
+#define MSGU_ODMR 0x74/* RevB */
+
+/* bit definition for ODMR register */
+#define ODMR_MASK_ALL 0xFFFFFFFF/* mask all
+ interrupt vector */
+#define ODMR_CLEAR_ALL 0/* clear all
+ interrupt vector */
+/* bit definition for ODCR register */
+#define ODCR_CLEAR_ALL 0xFFFFFFFF /* mask all
+ interrupt vector*/
+/* MSIX Interupts */
+#define MSIX_TABLE_OFFSET 0x2000
+#define MSIX_TABLE_ELEMENT_SIZE 0x10
+#define MSIX_INTERRUPT_CONTROL_OFFSET 0xC
+#define MSIX_TABLE_BASE (MSIX_TABLE_OFFSET + MSIX_INTERRUPT_CONTROL_OFFSET)
+#define MSIX_INTERRUPT_DISABLE 0x1
+#define MSIX_INTERRUPT_ENABLE 0x0
+
+
+/* state definition for Scratch Pad1 register */
+#define SCRATCH_PAD1_POR 0x00 /* power on reset state */
+#define SCRATCH_PAD1_SFR 0x01 /* soft reset state */
+#define SCRATCH_PAD1_ERR 0x02 /* error state */
+#define SCRATCH_PAD1_RDY 0x03 /* ready state */
+#define SCRATCH_PAD1_RST 0x04 /* soft reset toggle flag */
+#define SCRATCH_PAD1_AAP1RDY_RST 0x08 /* AAP1 ready for soft reset */
+#define SCRATCH_PAD1_STATE_MASK 0xFFFFFFF0 /* ScratchPad1
+ Mask, bit1-0 State, bit2 Soft Reset, bit3 FW RDY for Soft Reset */
+#define SCRATCH_PAD1_RESERVED 0x000003F8 /* Scratch Pad1
+ Reserved bit 3 to 9 */
+
+ /* state definition for Scratch Pad2 register */
+#define SCRATCH_PAD2_POR 0x00 /* power on state */
+#define SCRATCH_PAD2_SFR 0x01 /* soft reset state */
+#define SCRATCH_PAD2_ERR 0x02 /* error state */
+#define SCRATCH_PAD2_RDY 0x03 /* ready state */
+#define SCRATCH_PAD2_FWRDY_RST 0x04 /* FW ready for soft reset flag*/
+#define SCRATCH_PAD2_IOPRDY_RST 0x08 /* IOP ready for soft reset */
+#define SCRATCH_PAD2_STATE_MASK 0xFFFFFFF4 /* ScratchPad 2
+ Mask, bit1-0 State */
+#define SCRATCH_PAD2_RESERVED 0x000003FC /* Scratch Pad1
+ Reserved bit 2 to 9 */
+
+#define SCRATCH_PAD_ERROR_MASK 0xFFFFFC00 /* Error mask bits */
+#define SCRATCH_PAD_STATE_MASK 0x00000003 /* State Mask bits */
+
+/* main configuration offset - byte offset */
+#define MAIN_SIGNATURE_OFFSET 0x00/* DWORD 0x00 */
+#define MAIN_INTERFACE_REVISION 0x04/* DWORD 0x01 */
+#define MAIN_FW_REVISION 0x08/* DWORD 0x02 */
+#define MAIN_MAX_OUTSTANDING_IO_OFFSET 0x0C/* DWORD 0x03 */
+#define MAIN_MAX_SGL_OFFSET 0x10/* DWORD 0x04 */
+#define MAIN_CNTRL_CAP_OFFSET 0x14/* DWORD 0x05 */
+#define MAIN_GST_OFFSET 0x18/* DWORD 0x06 */
+#define MAIN_IBQ_OFFSET 0x1C/* DWORD 0x07 */
+#define MAIN_OBQ_OFFSET 0x20/* DWORD 0x08 */
+#define MAIN_IQNPPD_HPPD_OFFSET 0x24/* DWORD 0x09 */
+#define MAIN_OB_HW_EVENT_PID03_OFFSET 0x28/* DWORD 0x0A */
+#define MAIN_OB_HW_EVENT_PID47_OFFSET 0x2C/* DWORD 0x0B */
+#define MAIN_OB_NCQ_EVENT_PID03_OFFSET 0x30/* DWORD 0x0C */
+#define MAIN_OB_NCQ_EVENT_PID47_OFFSET 0x34/* DWORD 0x0D */
+#define MAIN_TITNX_EVENT_PID03_OFFSET 0x38/* DWORD 0x0E */
+#define MAIN_TITNX_EVENT_PID47_OFFSET 0x3C/* DWORD 0x0F */
+#define MAIN_OB_SSP_EVENT_PID03_OFFSET 0x40/* DWORD 0x10 */
+#define MAIN_OB_SSP_EVENT_PID47_OFFSET 0x44/* DWORD 0x11 */
+#define MAIN_OB_SMP_EVENT_PID03_OFFSET 0x48/* DWORD 0x12 */
+#define MAIN_OB_SMP_EVENT_PID47_OFFSET 0x4C/* DWORD 0x13 */
+#define MAIN_EVENT_LOG_ADDR_HI 0x50/* DWORD 0x14 */
+#define MAIN_EVENT_LOG_ADDR_LO 0x54/* DWORD 0x15 */
+#define MAIN_EVENT_LOG_BUFF_SIZE 0x58/* DWORD 0x16 */
+#define MAIN_EVENT_LOG_OPTION 0x5C/* DWORD 0x17 */
+#define MAIN_IOP_EVENT_LOG_ADDR_HI 0x60/* DWORD 0x18 */
+#define MAIN_IOP_EVENT_LOG_ADDR_LO 0x64/* DWORD 0x19 */
+#define MAIN_IOP_EVENT_LOG_BUFF_SIZE 0x68/* DWORD 0x1A */
+#define MAIN_IOP_EVENT_LOG_OPTION 0x6C/* DWORD 0x1B */
+#define MAIN_FATAL_ERROR_INTERRUPT 0x70/* DWORD 0x1C */
+#define MAIN_FATAL_ERROR_RDUMP0_OFFSET 0x74/* DWORD 0x1D */
+#define MAIN_FATAL_ERROR_RDUMP0_LENGTH 0x78/* DWORD 0x1E */
+#define MAIN_FATAL_ERROR_RDUMP1_OFFSET 0x7C/* DWORD 0x1F */
+#define MAIN_FATAL_ERROR_RDUMP1_LENGTH 0x80/* DWORD 0x20 */
+#define MAIN_HDA_FLAGS_OFFSET 0x84/* DWORD 0x21 */
+#define MAIN_ANALOG_SETUP_OFFSET 0x88/* DWORD 0x22 */
+
+/* Gereral Status Table offset - byte offset */
+#define GST_GSTLEN_MPIS_OFFSET 0x00
+#define GST_IQ_FREEZE_STATE0_OFFSET 0x04
+#define GST_IQ_FREEZE_STATE1_OFFSET 0x08
+#define GST_MSGUTCNT_OFFSET 0x0C
+#define GST_IOPTCNT_OFFSET 0x10
+#define GST_PHYSTATE_OFFSET 0x18
+#define GST_PHYSTATE0_OFFSET 0x18
+#define GST_PHYSTATE1_OFFSET 0x1C
+#define GST_PHYSTATE2_OFFSET 0x20
+#define GST_PHYSTATE3_OFFSET 0x24
+#define GST_PHYSTATE4_OFFSET 0x28
+#define GST_PHYSTATE5_OFFSET 0x2C
+#define GST_PHYSTATE6_OFFSET 0x30
+#define GST_PHYSTATE7_OFFSET 0x34
+#define GST_RERRINFO_OFFSET 0x44
+
+/* General Status Table - MPI state */
+#define GST_MPI_STATE_UNINIT 0x00
+#define GST_MPI_STATE_INIT 0x01
+#define GST_MPI_STATE_TERMINATION 0x02
+#define GST_MPI_STATE_ERROR 0x03
+#define GST_MPI_STATE_MASK 0x07
+
+#define MBIC_NMI_ENABLE_VPE0_IOP 0x000418
+#define MBIC_NMI_ENABLE_VPE0_AAP1 0x000418
+/* PCIE registers - BAR2(0x18), BAR1(win) 0x010000 */
+#define PCIE_EVENT_INTERRUPT_ENABLE 0x003040
+#define PCIE_EVENT_INTERRUPT 0x003044
+#define PCIE_ERROR_INTERRUPT_ENABLE 0x003048
+#define PCIE_ERROR_INTERRUPT 0x00304C
+/* signature definition for host scratch pad0 register */
+#define SPC_SOFT_RESET_SIGNATURE 0x252acbcd
+/* Signature for Soft Reset */
+
+/* SPC Reset register - BAR4(0x20), BAR2(win) (need dynamic mapping) */
+#define SPC_REG_RESET 0x000000/* reset register */
+
+/* bit difination for SPC_RESET register */
+#define SPC_REG_RESET_OSSP 0x00000001
+#define SPC_REG_RESET_RAAE 0x00000002
+#define SPC_REG_RESET_PCS_SPBC 0x00000004
+#define SPC_REG_RESET_PCS_IOP_SS 0x00000008
+#define SPC_REG_RESET_PCS_AAP1_SS 0x00000010
+#define SPC_REG_RESET_PCS_AAP2_SS 0x00000020
+#define SPC_REG_RESET_PCS_LM 0x00000040
+#define SPC_REG_RESET_PCS 0x00000080
+#define SPC_REG_RESET_GSM 0x00000100
+#define SPC_REG_RESET_DDR2 0x00010000
+#define SPC_REG_RESET_BDMA_CORE 0x00020000
+#define SPC_REG_RESET_BDMA_SXCBI 0x00040000
+#define SPC_REG_RESET_PCIE_AL_SXCBI 0x00080000
+#define SPC_REG_RESET_PCIE_PWR 0x00100000
+#define SPC_REG_RESET_PCIE_SFT 0x00200000
+#define SPC_REG_RESET_PCS_SXCBI 0x00400000
+#define SPC_REG_RESET_LMS_SXCBI 0x00800000
+#define SPC_REG_RESET_PMIC_SXCBI 0x01000000
+#define SPC_REG_RESET_PMIC_CORE 0x02000000
+#define SPC_REG_RESET_PCIE_PC_SXCBI 0x04000000
+#define SPC_REG_RESET_DEVICE 0x80000000
+
+/* registers for BAR Shifting - BAR2(0x18), BAR1(win) */
+#define SPC_IBW_AXI_TRANSLATION_LOW 0x003258
+
+#define MBIC_AAP1_ADDR_BASE 0x060000
+#define MBIC_IOP_ADDR_BASE 0x070000
+#define GSM_ADDR_BASE 0x0700000
+/* Dynamic map through Bar4 - 0x00700000 */
+#define GSM_CONFIG_RESET 0x00000000
+#define RAM_ECC_DB_ERR 0x00000018
+#define GSM_READ_ADDR_PARITY_INDIC 0x00000058
+#define GSM_WRITE_ADDR_PARITY_INDIC 0x00000060
+#define GSM_WRITE_DATA_PARITY_INDIC 0x00000068
+#define GSM_READ_ADDR_PARITY_CHECK 0x00000038
+#define GSM_WRITE_ADDR_PARITY_CHECK 0x00000040
+#define GSM_WRITE_DATA_PARITY_CHECK 0x00000048
+
+#define RB6_ACCESS_REG 0x6A0000
+#define HDAC_EXEC_CMD 0x0002
+#define HDA_C_PA 0xcb
+#define HDA_SEQ_ID_BITS 0x00ff0000
+#define HDA_GSM_OFFSET_BITS 0x00FFFFFF
+#define MBIC_AAP1_ADDR_BASE 0x060000
+#define MBIC_IOP_ADDR_BASE 0x070000
+#define GSM_ADDR_BASE 0x0700000
+#define SPC_TOP_LEVEL_ADDR_BASE 0x000000
+#define GSM_CONFIG_RESET_VALUE 0x00003b00
+#define GPIO_ADDR_BASE 0x00090000
+#define GPIO_GPIO_0_0UTPUT_CTL_OFFSET 0x0000010c
+
+/* RB6 offset */
+#define SPC_RB6_OFFSET 0x80C0
+/* Magic number of soft reset for RB6 */
+#define RB6_MAGIC_NUMBER_RST 0x1234
+
+/* Device Register status */
+#define DEVREG_SUCCESS 0x00
+#define DEVREG_FAILURE_OUT_OF_RESOURCE 0x01
+#define DEVREG_FAILURE_DEVICE_ALREADY_REGISTERED 0x02
+#define DEVREG_FAILURE_INVALID_PHY_ID 0x03
+#define DEVREG_FAILURE_PHY_ID_ALREADY_REGISTERED 0x04
+#define DEVREG_FAILURE_PORT_ID_OUT_OF_RANGE 0x05
+#define DEVREG_FAILURE_PORT_NOT_VALID_STATE 0x06
+#define DEVREG_FAILURE_DEVICE_TYPE_NOT_VALID 0x07
+
+#define GSM_BASE 0x4F0000
+#define SHIFT_REG_64K_MASK 0xffff0000
+#define SHIFT_REG_BIT_SHIFT 8
+#endif
+
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
new file mode 100644
index 0000000000..443a3176c6
--- /dev/null
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -0,0 +1,1569 @@
+/*
+ * PMC-Sierra PM8001/8081/8088/8089 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#include <linux/slab.h>
+#include "pm8001_sas.h"
+#include "pm8001_chips.h"
+#include "pm80xx_hwi.h"
+
+static ulong logging_level = PM8001_FAIL_LOGGING | PM8001_IOERR_LOGGING |
+ PM8001_EVENT_LOGGING | PM8001_INIT_LOGGING;
+module_param(logging_level, ulong, 0644);
+MODULE_PARM_DESC(logging_level, " bits for enabling logging info.");
+
+static ulong link_rate = LINKRATE_15 | LINKRATE_30 | LINKRATE_60 | LINKRATE_120;
+module_param(link_rate, ulong, 0644);
+MODULE_PARM_DESC(link_rate, "Enable link rate.\n"
+ " 1: Link rate 1.5G\n"
+ " 2: Link rate 3.0G\n"
+ " 4: Link rate 6.0G\n"
+ " 8: Link rate 12.0G\n");
+
+static struct scsi_transport_template *pm8001_stt;
+static int pm8001_init_ccb_tag(struct pm8001_hba_info *);
+
+/*
+ * chip info structure to identify chip key functionality as
+ * encryption available/not, no of ports, hw specific function ref
+ */
+static const struct pm8001_chip_info pm8001_chips[] = {
+ [chip_8001] = {0, 8, &pm8001_8001_dispatch,},
+ [chip_8008] = {0, 8, &pm8001_80xx_dispatch,},
+ [chip_8009] = {1, 8, &pm8001_80xx_dispatch,},
+ [chip_8018] = {0, 16, &pm8001_80xx_dispatch,},
+ [chip_8019] = {1, 16, &pm8001_80xx_dispatch,},
+ [chip_8074] = {0, 8, &pm8001_80xx_dispatch,},
+ [chip_8076] = {0, 16, &pm8001_80xx_dispatch,},
+ [chip_8077] = {0, 16, &pm8001_80xx_dispatch,},
+ [chip_8006] = {0, 16, &pm8001_80xx_dispatch,},
+ [chip_8070] = {0, 8, &pm8001_80xx_dispatch,},
+ [chip_8072] = {0, 16, &pm8001_80xx_dispatch,},
+};
+static int pm8001_id;
+
+LIST_HEAD(hba_list);
+
+struct workqueue_struct *pm8001_wq;
+
+static void pm8001_map_queues(struct Scsi_Host *shost)
+{
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+ struct blk_mq_queue_map *qmap = &shost->tag_set.map[HCTX_TYPE_DEFAULT];
+
+ if (pm8001_ha->number_of_intr > 1)
+ blk_mq_pci_map_queues(qmap, pm8001_ha->pdev, 1);
+
+ return blk_mq_map_queues(qmap);
+}
+
+/*
+ * The main structure which LLDD must register for scsi core.
+ */
+static const struct scsi_host_template pm8001_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .proc_name = DRV_NAME,
+ .queuecommand = sas_queuecommand,
+ .dma_need_drain = ata_scsi_dma_need_drain,
+ .target_alloc = sas_target_alloc,
+ .slave_configure = sas_slave_configure,
+ .scan_finished = pm8001_scan_finished,
+ .scan_start = pm8001_scan_start,
+ .change_queue_depth = sas_change_queue_depth,
+ .bios_param = sas_bios_param,
+ .can_queue = 1,
+ .this_id = -1,
+ .sg_tablesize = PM8001_MAX_DMA_SG,
+ .max_sectors = SCSI_DEFAULT_MAX_SECTORS,
+ .eh_device_reset_handler = sas_eh_device_reset_handler,
+ .eh_target_reset_handler = sas_eh_target_reset_handler,
+ .slave_alloc = sas_slave_alloc,
+ .target_destroy = sas_target_destroy,
+ .ioctl = sas_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = sas_ioctl,
+#endif
+ .shost_groups = pm8001_host_groups,
+ .track_queue_depth = 1,
+ .cmd_per_lun = 32,
+ .map_queues = pm8001_map_queues,
+};
+
+/*
+ * Sas layer call this function to execute specific task.
+ */
+static struct sas_domain_function_template pm8001_transport_ops = {
+ .lldd_dev_found = pm8001_dev_found,
+ .lldd_dev_gone = pm8001_dev_gone,
+
+ .lldd_execute_task = pm8001_queue_command,
+ .lldd_control_phy = pm8001_phy_control,
+
+ .lldd_abort_task = pm8001_abort_task,
+ .lldd_abort_task_set = sas_abort_task_set,
+ .lldd_clear_task_set = pm8001_clear_task_set,
+ .lldd_I_T_nexus_reset = pm8001_I_T_nexus_reset,
+ .lldd_lu_reset = pm8001_lu_reset,
+ .lldd_query_task = pm8001_query_task,
+ .lldd_port_formed = pm8001_port_formed,
+ .lldd_tmf_exec_complete = pm8001_setds_completion,
+ .lldd_tmf_aborted = pm8001_tmf_aborted,
+};
+
+/**
+ * pm8001_phy_init - initiate our adapter phys
+ * @pm8001_ha: our hba structure.
+ * @phy_id: phy id.
+ */
+static void pm8001_phy_init(struct pm8001_hba_info *pm8001_ha, int phy_id)
+{
+ struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ phy->phy_state = PHY_LINK_DISABLE;
+ phy->pm8001_ha = pm8001_ha;
+ phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
+ phy->maximum_linkrate = SAS_LINK_RATE_6_0_GBPS;
+ sas_phy->enabled = (phy_id < pm8001_ha->chip->n_phy) ? 1 : 0;
+ sas_phy->iproto = SAS_PROTOCOL_ALL;
+ sas_phy->tproto = 0;
+ sas_phy->role = PHY_ROLE_INITIATOR;
+ sas_phy->oob_mode = OOB_NOT_CONNECTED;
+ sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN;
+ sas_phy->id = phy_id;
+ sas_phy->sas_addr = (u8 *)&phy->dev_sas_addr;
+ sas_phy->frame_rcvd = &phy->frame_rcvd[0];
+ sas_phy->ha = (struct sas_ha_struct *)pm8001_ha->shost->hostdata;
+ sas_phy->lldd_phy = phy;
+}
+
+/**
+ * pm8001_free - free hba
+ * @pm8001_ha: our hba structure.
+ */
+static void pm8001_free(struct pm8001_hba_info *pm8001_ha)
+{
+ int i;
+
+ if (!pm8001_ha)
+ return;
+
+ for (i = 0; i < USI_MAX_MEMCNT; i++) {
+ if (pm8001_ha->memoryMap.region[i].virt_ptr != NULL) {
+ dma_free_coherent(&pm8001_ha->pdev->dev,
+ (pm8001_ha->memoryMap.region[i].total_len +
+ pm8001_ha->memoryMap.region[i].alignment),
+ pm8001_ha->memoryMap.region[i].virt_ptr,
+ pm8001_ha->memoryMap.region[i].phys_addr);
+ }
+ }
+ PM8001_CHIP_DISP->chip_iounmap(pm8001_ha);
+ flush_workqueue(pm8001_wq);
+ bitmap_free(pm8001_ha->rsvd_tags);
+ kfree(pm8001_ha);
+}
+
+#ifdef PM8001_USE_TASKLET
+
+/**
+ * pm8001_tasklet() - tasklet for 64 msi-x interrupt handler
+ * @opaque: the passed general host adapter struct
+ * Note: pm8001_tasklet is common for pm8001 & pm80xx
+ */
+static void pm8001_tasklet(unsigned long opaque)
+{
+ struct pm8001_hba_info *pm8001_ha;
+ struct isr_param *irq_vector;
+
+ irq_vector = (struct isr_param *)opaque;
+ pm8001_ha = irq_vector->drv_inst;
+ if (unlikely(!pm8001_ha))
+ BUG_ON(1);
+ PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id);
+}
+#endif
+
+/**
+ * pm8001_interrupt_handler_msix - main MSIX interrupt handler.
+ * It obtains the vector number and calls the equivalent bottom
+ * half or services directly.
+ * @irq: interrupt number
+ * @opaque: the passed outbound queue/vector. Host structure is
+ * retrieved from the same.
+ */
+static irqreturn_t pm8001_interrupt_handler_msix(int irq, void *opaque)
+{
+ struct isr_param *irq_vector;
+ struct pm8001_hba_info *pm8001_ha;
+ irqreturn_t ret = IRQ_HANDLED;
+ irq_vector = (struct isr_param *)opaque;
+ pm8001_ha = irq_vector->drv_inst;
+
+ if (unlikely(!pm8001_ha))
+ return IRQ_NONE;
+ if (!PM8001_CHIP_DISP->is_our_interrupt(pm8001_ha))
+ return IRQ_NONE;
+#ifdef PM8001_USE_TASKLET
+ tasklet_schedule(&pm8001_ha->tasklet[irq_vector->irq_id]);
+#else
+ ret = PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id);
+#endif
+ return ret;
+}
+
+/**
+ * pm8001_interrupt_handler_intx - main INTx interrupt handler.
+ * @irq: interrupt number
+ * @dev_id: sas_ha structure. The HBA is retrieved from sas_ha structure.
+ */
+
+static irqreturn_t pm8001_interrupt_handler_intx(int irq, void *dev_id)
+{
+ struct pm8001_hba_info *pm8001_ha;
+ irqreturn_t ret = IRQ_HANDLED;
+ struct sas_ha_struct *sha = dev_id;
+ pm8001_ha = sha->lldd_ha;
+ if (unlikely(!pm8001_ha))
+ return IRQ_NONE;
+ if (!PM8001_CHIP_DISP->is_our_interrupt(pm8001_ha))
+ return IRQ_NONE;
+
+#ifdef PM8001_USE_TASKLET
+ tasklet_schedule(&pm8001_ha->tasklet[0]);
+#else
+ ret = PM8001_CHIP_DISP->isr(pm8001_ha, 0);
+#endif
+ return ret;
+}
+
+static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha);
+
+/**
+ * pm8001_alloc - initiate our hba structure and 6 DMAs area.
+ * @pm8001_ha: our hba structure.
+ * @ent: PCI device ID structure to match on
+ */
+static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha,
+ const struct pci_device_id *ent)
+{
+ int i, count = 0, rc = 0;
+ u32 ci_offset, ib_offset, ob_offset, pi_offset;
+ struct inbound_queue_table *ibq;
+ struct outbound_queue_table *obq;
+
+ spin_lock_init(&pm8001_ha->lock);
+ spin_lock_init(&pm8001_ha->bitmap_lock);
+ pm8001_dbg(pm8001_ha, INIT, "pm8001_alloc: PHY:%x\n",
+ pm8001_ha->chip->n_phy);
+
+ /* Request Interrupt */
+ rc = pm8001_request_irq(pm8001_ha);
+ if (rc)
+ goto err_out;
+
+ count = pm8001_ha->max_q_num;
+ /* Queues are chosen based on the number of cores/msix availability */
+ ib_offset = pm8001_ha->ib_offset = USI_MAX_MEMCNT_BASE;
+ ci_offset = pm8001_ha->ci_offset = ib_offset + count;
+ ob_offset = pm8001_ha->ob_offset = ci_offset + count;
+ pi_offset = pm8001_ha->pi_offset = ob_offset + count;
+ pm8001_ha->max_memcnt = pi_offset + count;
+
+ for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
+ pm8001_phy_init(pm8001_ha, i);
+ pm8001_ha->port[i].wide_port_phymap = 0;
+ pm8001_ha->port[i].port_attached = 0;
+ pm8001_ha->port[i].port_state = 0;
+ INIT_LIST_HEAD(&pm8001_ha->port[i].list);
+ }
+
+ /* MPI Memory region 1 for AAP Event Log for fw */
+ pm8001_ha->memoryMap.region[AAP1].num_elements = 1;
+ pm8001_ha->memoryMap.region[AAP1].element_size = PM8001_EVENT_LOG_SIZE;
+ pm8001_ha->memoryMap.region[AAP1].total_len = PM8001_EVENT_LOG_SIZE;
+ pm8001_ha->memoryMap.region[AAP1].alignment = 32;
+
+ /* MPI Memory region 2 for IOP Event Log for fw */
+ pm8001_ha->memoryMap.region[IOP].num_elements = 1;
+ pm8001_ha->memoryMap.region[IOP].element_size = PM8001_EVENT_LOG_SIZE;
+ pm8001_ha->memoryMap.region[IOP].total_len = PM8001_EVENT_LOG_SIZE;
+ pm8001_ha->memoryMap.region[IOP].alignment = 32;
+
+ for (i = 0; i < count; i++) {
+ ibq = &pm8001_ha->inbnd_q_tbl[i];
+ spin_lock_init(&ibq->iq_lock);
+ /* MPI Memory region 3 for consumer Index of inbound queues */
+ pm8001_ha->memoryMap.region[ci_offset+i].num_elements = 1;
+ pm8001_ha->memoryMap.region[ci_offset+i].element_size = 4;
+ pm8001_ha->memoryMap.region[ci_offset+i].total_len = 4;
+ pm8001_ha->memoryMap.region[ci_offset+i].alignment = 4;
+
+ if ((ent->driver_data) != chip_8001) {
+ /* MPI Memory region 5 inbound queues */
+ pm8001_ha->memoryMap.region[ib_offset+i].num_elements =
+ PM8001_MPI_QUEUE;
+ pm8001_ha->memoryMap.region[ib_offset+i].element_size
+ = 128;
+ pm8001_ha->memoryMap.region[ib_offset+i].total_len =
+ PM8001_MPI_QUEUE * 128;
+ pm8001_ha->memoryMap.region[ib_offset+i].alignment
+ = 128;
+ } else {
+ pm8001_ha->memoryMap.region[ib_offset+i].num_elements =
+ PM8001_MPI_QUEUE;
+ pm8001_ha->memoryMap.region[ib_offset+i].element_size
+ = 64;
+ pm8001_ha->memoryMap.region[ib_offset+i].total_len =
+ PM8001_MPI_QUEUE * 64;
+ pm8001_ha->memoryMap.region[ib_offset+i].alignment = 64;
+ }
+ }
+
+ for (i = 0; i < count; i++) {
+ obq = &pm8001_ha->outbnd_q_tbl[i];
+ spin_lock_init(&obq->oq_lock);
+ /* MPI Memory region 4 for producer Index of outbound queues */
+ pm8001_ha->memoryMap.region[pi_offset+i].num_elements = 1;
+ pm8001_ha->memoryMap.region[pi_offset+i].element_size = 4;
+ pm8001_ha->memoryMap.region[pi_offset+i].total_len = 4;
+ pm8001_ha->memoryMap.region[pi_offset+i].alignment = 4;
+
+ if (ent->driver_data != chip_8001) {
+ /* MPI Memory region 6 Outbound queues */
+ pm8001_ha->memoryMap.region[ob_offset+i].num_elements =
+ PM8001_MPI_QUEUE;
+ pm8001_ha->memoryMap.region[ob_offset+i].element_size
+ = 128;
+ pm8001_ha->memoryMap.region[ob_offset+i].total_len =
+ PM8001_MPI_QUEUE * 128;
+ pm8001_ha->memoryMap.region[ob_offset+i].alignment
+ = 128;
+ } else {
+ /* MPI Memory region 6 Outbound queues */
+ pm8001_ha->memoryMap.region[ob_offset+i].num_elements =
+ PM8001_MPI_QUEUE;
+ pm8001_ha->memoryMap.region[ob_offset+i].element_size
+ = 64;
+ pm8001_ha->memoryMap.region[ob_offset+i].total_len =
+ PM8001_MPI_QUEUE * 64;
+ pm8001_ha->memoryMap.region[ob_offset+i].alignment = 64;
+ }
+
+ }
+ /* Memory region write DMA*/
+ pm8001_ha->memoryMap.region[NVMD].num_elements = 1;
+ pm8001_ha->memoryMap.region[NVMD].element_size = 4096;
+ pm8001_ha->memoryMap.region[NVMD].total_len = 4096;
+
+ /* Memory region for fw flash */
+ pm8001_ha->memoryMap.region[FW_FLASH].total_len = 4096;
+
+ pm8001_ha->memoryMap.region[FORENSIC_MEM].num_elements = 1;
+ pm8001_ha->memoryMap.region[FORENSIC_MEM].total_len = 0x10000;
+ pm8001_ha->memoryMap.region[FORENSIC_MEM].element_size = 0x10000;
+ pm8001_ha->memoryMap.region[FORENSIC_MEM].alignment = 0x10000;
+ for (i = 0; i < pm8001_ha->max_memcnt; i++) {
+ struct mpi_mem *region = &pm8001_ha->memoryMap.region[i];
+
+ if (pm8001_mem_alloc(pm8001_ha->pdev,
+ &region->virt_ptr,
+ &region->phys_addr,
+ &region->phys_addr_hi,
+ &region->phys_addr_lo,
+ region->total_len,
+ region->alignment) != 0) {
+ pm8001_dbg(pm8001_ha, FAIL, "Mem%d alloc failed\n", i);
+ goto err_out;
+ }
+ }
+
+ /* Memory region for devices*/
+ pm8001_ha->devices = kzalloc(PM8001_MAX_DEVICES
+ * sizeof(struct pm8001_device), GFP_KERNEL);
+ if (!pm8001_ha->devices) {
+ rc = -ENOMEM;
+ goto err_out_nodev;
+ }
+ for (i = 0; i < PM8001_MAX_DEVICES; i++) {
+ pm8001_ha->devices[i].dev_type = SAS_PHY_UNUSED;
+ pm8001_ha->devices[i].id = i;
+ pm8001_ha->devices[i].device_id = PM8001_MAX_DEVICES;
+ atomic_set(&pm8001_ha->devices[i].running_req, 0);
+ }
+ pm8001_ha->flags = PM8001F_INIT_TIME;
+ return 0;
+
+err_out_nodev:
+ for (i = 0; i < pm8001_ha->max_memcnt; i++) {
+ if (pm8001_ha->memoryMap.region[i].virt_ptr != NULL) {
+ dma_free_coherent(&pm8001_ha->pdev->dev,
+ (pm8001_ha->memoryMap.region[i].total_len +
+ pm8001_ha->memoryMap.region[i].alignment),
+ pm8001_ha->memoryMap.region[i].virt_ptr,
+ pm8001_ha->memoryMap.region[i].phys_addr);
+ }
+ }
+err_out:
+ return 1;
+}
+
+/**
+ * pm8001_ioremap - remap the pci high physical address to kernel virtual
+ * address so that we can access them.
+ * @pm8001_ha: our hba structure.
+ */
+static int pm8001_ioremap(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 bar;
+ u32 logicalBar = 0;
+ struct pci_dev *pdev;
+
+ pdev = pm8001_ha->pdev;
+ /* map pci mem (PMC pci base 0-3)*/
+ for (bar = 0; bar < PCI_STD_NUM_BARS; bar++) {
+ /*
+ ** logical BARs for SPC:
+ ** bar 0 and 1 - logical BAR0
+ ** bar 2 and 3 - logical BAR1
+ ** bar4 - logical BAR2
+ ** bar5 - logical BAR3
+ ** Skip the appropriate assignments:
+ */
+ if ((bar == 1) || (bar == 3))
+ continue;
+ if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) {
+ pm8001_ha->io_mem[logicalBar].membase =
+ pci_resource_start(pdev, bar);
+ pm8001_ha->io_mem[logicalBar].memsize =
+ pci_resource_len(pdev, bar);
+ pm8001_ha->io_mem[logicalBar].memvirtaddr =
+ ioremap(pm8001_ha->io_mem[logicalBar].membase,
+ pm8001_ha->io_mem[logicalBar].memsize);
+ if (!pm8001_ha->io_mem[logicalBar].memvirtaddr) {
+ pm8001_dbg(pm8001_ha, INIT,
+ "Failed to ioremap bar %d, logicalBar %d",
+ bar, logicalBar);
+ return -ENOMEM;
+ }
+ pm8001_dbg(pm8001_ha, INIT,
+ "base addr %llx virt_addr=%llx len=%d\n",
+ (u64)pm8001_ha->io_mem[logicalBar].membase,
+ (u64)(unsigned long)
+ pm8001_ha->io_mem[logicalBar].memvirtaddr,
+ pm8001_ha->io_mem[logicalBar].memsize);
+ } else {
+ pm8001_ha->io_mem[logicalBar].membase = 0;
+ pm8001_ha->io_mem[logicalBar].memsize = 0;
+ pm8001_ha->io_mem[logicalBar].memvirtaddr = NULL;
+ }
+ logicalBar++;
+ }
+ return 0;
+}
+
+/**
+ * pm8001_pci_alloc - initialize our ha card structure
+ * @pdev: pci device.
+ * @ent: ent
+ * @shost: scsi host struct which has been initialized before.
+ */
+static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev,
+ const struct pci_device_id *ent,
+ struct Scsi_Host *shost)
+
+{
+ struct pm8001_hba_info *pm8001_ha;
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ int j;
+
+ pm8001_ha = sha->lldd_ha;
+ if (!pm8001_ha)
+ return NULL;
+
+ pm8001_ha->pdev = pdev;
+ pm8001_ha->dev = &pdev->dev;
+ pm8001_ha->chip_id = ent->driver_data;
+ pm8001_ha->chip = &pm8001_chips[pm8001_ha->chip_id];
+ pm8001_ha->irq = pdev->irq;
+ pm8001_ha->sas = sha;
+ pm8001_ha->shost = shost;
+ pm8001_ha->id = pm8001_id++;
+ pm8001_ha->logging_level = logging_level;
+ pm8001_ha->non_fatal_count = 0;
+ if (link_rate >= 1 && link_rate <= 15)
+ pm8001_ha->link_rate = (link_rate << 8);
+ else {
+ pm8001_ha->link_rate = LINKRATE_15 | LINKRATE_30 |
+ LINKRATE_60 | LINKRATE_120;
+ pm8001_dbg(pm8001_ha, FAIL,
+ "Setting link rate to default value\n");
+ }
+ sprintf(pm8001_ha->name, "%s%d", DRV_NAME, pm8001_ha->id);
+ /* IOMB size is 128 for 8088/89 controllers */
+ if (pm8001_ha->chip_id != chip_8001)
+ pm8001_ha->iomb_size = IOMB_SIZE_SPCV;
+ else
+ pm8001_ha->iomb_size = IOMB_SIZE_SPC;
+
+#ifdef PM8001_USE_TASKLET
+ /* Tasklet for non msi-x interrupt handler */
+ if ((!pdev->msix_cap || !pci_msi_enabled())
+ || (pm8001_ha->chip_id == chip_8001))
+ tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet,
+ (unsigned long)&(pm8001_ha->irq_vector[0]));
+ else
+ for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
+ tasklet_init(&pm8001_ha->tasklet[j], pm8001_tasklet,
+ (unsigned long)&(pm8001_ha->irq_vector[j]));
+#endif
+ if (pm8001_ioremap(pm8001_ha))
+ goto failed_pci_alloc;
+ if (!pm8001_alloc(pm8001_ha, ent))
+ return pm8001_ha;
+failed_pci_alloc:
+ pm8001_free(pm8001_ha);
+ return NULL;
+}
+
+/**
+ * pci_go_44 - pm8001 specified, its DMA is 44 bit rather than 64 bit
+ * @pdev: pci device.
+ */
+static int pci_go_44(struct pci_dev *pdev)
+{
+ int rc;
+
+ rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(44));
+ if (rc) {
+ rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+ if (rc)
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit DMA enable failed\n");
+ }
+ return rc;
+}
+
+/**
+ * pm8001_prep_sas_ha_init - allocate memory in general hba struct && init them.
+ * @shost: scsi host which has been allocated outside.
+ * @chip_info: our ha struct.
+ */
+static int pm8001_prep_sas_ha_init(struct Scsi_Host *shost,
+ const struct pm8001_chip_info *chip_info)
+{
+ int phy_nr, port_nr;
+ struct asd_sas_phy **arr_phy;
+ struct asd_sas_port **arr_port;
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+
+ phy_nr = chip_info->n_phy;
+ port_nr = phy_nr;
+ memset(sha, 0x00, sizeof(*sha));
+ arr_phy = kcalloc(phy_nr, sizeof(void *), GFP_KERNEL);
+ if (!arr_phy)
+ goto exit;
+ arr_port = kcalloc(port_nr, sizeof(void *), GFP_KERNEL);
+ if (!arr_port)
+ goto exit_free2;
+
+ sha->sas_phy = arr_phy;
+ sha->sas_port = arr_port;
+ sha->lldd_ha = kzalloc(sizeof(struct pm8001_hba_info), GFP_KERNEL);
+ if (!sha->lldd_ha)
+ goto exit_free1;
+
+ shost->transportt = pm8001_stt;
+ shost->max_id = PM8001_MAX_DEVICES;
+ shost->unique_id = pm8001_id;
+ shost->max_cmd_len = 16;
+ return 0;
+exit_free1:
+ kfree(arr_port);
+exit_free2:
+ kfree(arr_phy);
+exit:
+ return -1;
+}
+
+/**
+ * pm8001_post_sas_ha_init - initialize general hba struct defined in libsas
+ * @shost: scsi host which has been allocated outside
+ * @chip_info: our ha struct.
+ */
+static void pm8001_post_sas_ha_init(struct Scsi_Host *shost,
+ const struct pm8001_chip_info *chip_info)
+{
+ int i = 0;
+ struct pm8001_hba_info *pm8001_ha;
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+
+ pm8001_ha = sha->lldd_ha;
+ for (i = 0; i < chip_info->n_phy; i++) {
+ sha->sas_phy[i] = &pm8001_ha->phy[i].sas_phy;
+ sha->sas_port[i] = &pm8001_ha->port[i].sas_port;
+ sha->sas_phy[i]->sas_addr =
+ (u8 *)&pm8001_ha->phy[i].dev_sas_addr;
+ }
+ sha->sas_ha_name = DRV_NAME;
+ sha->dev = pm8001_ha->dev;
+ sha->strict_wide_ports = 1;
+ sha->sas_addr = &pm8001_ha->sas_addr[0];
+ sha->num_phys = chip_info->n_phy;
+ sha->shost = shost;
+}
+
+/**
+ * pm8001_init_sas_add - initialize sas address
+ * @pm8001_ha: our ha struct.
+ *
+ * Currently we just set the fixed SAS address to our HBA, for manufacture,
+ * it should read from the EEPROM
+ */
+static int pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
+{
+ u8 i, j;
+ u8 sas_add[8];
+#ifdef PM8001_READ_VPD
+ /* For new SPC controllers WWN is stored in flash vpd
+ * For SPC/SPCve controllers WWN is stored in EEPROM
+ * For Older SPC WWN is stored in NVMD
+ */
+ DECLARE_COMPLETION_ONSTACK(completion);
+ struct pm8001_ioctl_payload payload;
+ u16 deviceid;
+ int rc;
+ unsigned long time_remaining;
+
+ if (PM8001_CHIP_DISP->fatal_errors(pm8001_ha)) {
+ pm8001_dbg(pm8001_ha, FAIL, "controller is in fatal error state\n");
+ return -EIO;
+ }
+
+ pci_read_config_word(pm8001_ha->pdev, PCI_DEVICE_ID, &deviceid);
+ pm8001_ha->nvmd_completion = &completion;
+
+ if (pm8001_ha->chip_id == chip_8001) {
+ if (deviceid == 0x8081 || deviceid == 0x0042) {
+ payload.minor_function = 4;
+ payload.rd_length = 4096;
+ } else {
+ payload.minor_function = 0;
+ payload.rd_length = 128;
+ }
+ } else if ((pm8001_ha->chip_id == chip_8070 ||
+ pm8001_ha->chip_id == chip_8072) &&
+ pm8001_ha->pdev->subsystem_vendor == PCI_VENDOR_ID_ATTO) {
+ payload.minor_function = 4;
+ payload.rd_length = 4096;
+ } else {
+ payload.minor_function = 1;
+ payload.rd_length = 4096;
+ }
+ payload.offset = 0;
+ payload.func_specific = kzalloc(payload.rd_length, GFP_KERNEL);
+ if (!payload.func_specific) {
+ pm8001_dbg(pm8001_ha, FAIL, "mem alloc fail\n");
+ return -ENOMEM;
+ }
+ rc = PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
+ if (rc) {
+ kfree(payload.func_specific);
+ pm8001_dbg(pm8001_ha, FAIL, "nvmd failed\n");
+ return -EIO;
+ }
+ time_remaining = wait_for_completion_timeout(&completion,
+ msecs_to_jiffies(60*1000)); // 1 min
+ if (!time_remaining) {
+ kfree(payload.func_specific);
+ pm8001_dbg(pm8001_ha, FAIL, "get_nvmd_req timeout\n");
+ return -EIO;
+ }
+
+
+ for (i = 0, j = 0; i <= 7; i++, j++) {
+ if (pm8001_ha->chip_id == chip_8001) {
+ if (deviceid == 0x8081)
+ pm8001_ha->sas_addr[j] =
+ payload.func_specific[0x704 + i];
+ else if (deviceid == 0x0042)
+ pm8001_ha->sas_addr[j] =
+ payload.func_specific[0x010 + i];
+ } else if ((pm8001_ha->chip_id == chip_8070 ||
+ pm8001_ha->chip_id == chip_8072) &&
+ pm8001_ha->pdev->subsystem_vendor == PCI_VENDOR_ID_ATTO) {
+ pm8001_ha->sas_addr[j] =
+ payload.func_specific[0x010 + i];
+ } else
+ pm8001_ha->sas_addr[j] =
+ payload.func_specific[0x804 + i];
+ }
+ memcpy(sas_add, pm8001_ha->sas_addr, SAS_ADDR_SIZE);
+ for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
+ if (i && ((i % 4) == 0))
+ sas_add[7] = sas_add[7] + 4;
+ memcpy(&pm8001_ha->phy[i].dev_sas_addr,
+ sas_add, SAS_ADDR_SIZE);
+ pm8001_dbg(pm8001_ha, INIT, "phy %d sas_addr = %016llx\n", i,
+ pm8001_ha->phy[i].dev_sas_addr);
+ }
+ kfree(payload.func_specific);
+#else
+ for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
+ pm8001_ha->phy[i].dev_sas_addr = 0x50010c600047f9d0ULL;
+ pm8001_ha->phy[i].dev_sas_addr =
+ cpu_to_be64((u64)
+ (*(u64 *)&pm8001_ha->phy[i].dev_sas_addr));
+ }
+ memcpy(pm8001_ha->sas_addr, &pm8001_ha->phy[0].dev_sas_addr,
+ SAS_ADDR_SIZE);
+#endif
+ return 0;
+}
+
+/*
+ * pm8001_get_phy_settings_info : Read phy setting values.
+ * @pm8001_ha : our hba.
+ */
+static int pm8001_get_phy_settings_info(struct pm8001_hba_info *pm8001_ha)
+{
+
+#ifdef PM8001_READ_VPD
+ /*OPTION ROM FLASH read for the SPC cards */
+ DECLARE_COMPLETION_ONSTACK(completion);
+ struct pm8001_ioctl_payload payload;
+ int rc;
+
+ pm8001_ha->nvmd_completion = &completion;
+ /* SAS ADDRESS read from flash / EEPROM */
+ payload.minor_function = 6;
+ payload.offset = 0;
+ payload.rd_length = 4096;
+ payload.func_specific = kzalloc(4096, GFP_KERNEL);
+ if (!payload.func_specific)
+ return -ENOMEM;
+ /* Read phy setting values from flash */
+ rc = PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
+ if (rc) {
+ kfree(payload.func_specific);
+ pm8001_dbg(pm8001_ha, INIT, "nvmd failed\n");
+ return -ENOMEM;
+ }
+ wait_for_completion(&completion);
+ pm8001_set_phy_profile(pm8001_ha, sizeof(u8), payload.func_specific);
+ kfree(payload.func_specific);
+#endif
+ return 0;
+}
+
+struct pm8001_mpi3_phy_pg_trx_config {
+ u32 LaneLosCfg;
+ u32 LanePgaCfg1;
+ u32 LanePisoCfg1;
+ u32 LanePisoCfg2;
+ u32 LanePisoCfg3;
+ u32 LanePisoCfg4;
+ u32 LanePisoCfg5;
+ u32 LanePisoCfg6;
+ u32 LaneBctCtrl;
+};
+
+/**
+ * pm8001_get_internal_phy_settings - Retrieves the internal PHY settings
+ * @pm8001_ha : our adapter
+ * @phycfg : PHY config page to populate
+ */
+static
+void pm8001_get_internal_phy_settings(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_mpi3_phy_pg_trx_config *phycfg)
+{
+ phycfg->LaneLosCfg = 0x00000132;
+ phycfg->LanePgaCfg1 = 0x00203949;
+ phycfg->LanePisoCfg1 = 0x000000FF;
+ phycfg->LanePisoCfg2 = 0xFF000001;
+ phycfg->LanePisoCfg3 = 0xE7011300;
+ phycfg->LanePisoCfg4 = 0x631C40C0;
+ phycfg->LanePisoCfg5 = 0xF8102036;
+ phycfg->LanePisoCfg6 = 0xF74A1000;
+ phycfg->LaneBctCtrl = 0x00FB33F8;
+}
+
+/**
+ * pm8001_get_external_phy_settings - Retrieves the external PHY settings
+ * @pm8001_ha : our adapter
+ * @phycfg : PHY config page to populate
+ */
+static
+void pm8001_get_external_phy_settings(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_mpi3_phy_pg_trx_config *phycfg)
+{
+ phycfg->LaneLosCfg = 0x00000132;
+ phycfg->LanePgaCfg1 = 0x00203949;
+ phycfg->LanePisoCfg1 = 0x000000FF;
+ phycfg->LanePisoCfg2 = 0xFF000001;
+ phycfg->LanePisoCfg3 = 0xE7011300;
+ phycfg->LanePisoCfg4 = 0x63349140;
+ phycfg->LanePisoCfg5 = 0xF8102036;
+ phycfg->LanePisoCfg6 = 0xF80D9300;
+ phycfg->LaneBctCtrl = 0x00FB33F8;
+}
+
+/**
+ * pm8001_get_phy_mask - Retrieves the mask that denotes if a PHY is int/ext
+ * @pm8001_ha : our adapter
+ * @phymask : The PHY mask
+ */
+static
+void pm8001_get_phy_mask(struct pm8001_hba_info *pm8001_ha, int *phymask)
+{
+ switch (pm8001_ha->pdev->subsystem_device) {
+ case 0x0070: /* H1280 - 8 external 0 internal */
+ case 0x0072: /* H12F0 - 16 external 0 internal */
+ *phymask = 0x0000;
+ break;
+
+ case 0x0071: /* H1208 - 0 external 8 internal */
+ case 0x0073: /* H120F - 0 external 16 internal */
+ *phymask = 0xFFFF;
+ break;
+
+ case 0x0080: /* H1244 - 4 external 4 internal */
+ *phymask = 0x00F0;
+ break;
+
+ case 0x0081: /* H1248 - 4 external 8 internal */
+ *phymask = 0x0FF0;
+ break;
+
+ case 0x0082: /* H1288 - 8 external 8 internal */
+ *phymask = 0xFF00;
+ break;
+
+ default:
+ pm8001_dbg(pm8001_ha, INIT,
+ "Unknown subsystem device=0x%.04x\n",
+ pm8001_ha->pdev->subsystem_device);
+ }
+}
+
+/**
+ * pm8001_set_phy_settings_ven_117c_12G() - Configure ATTO 12Gb PHY settings
+ * @pm8001_ha : our adapter
+ */
+static
+int pm8001_set_phy_settings_ven_117c_12G(struct pm8001_hba_info *pm8001_ha)
+{
+ struct pm8001_mpi3_phy_pg_trx_config phycfg_int;
+ struct pm8001_mpi3_phy_pg_trx_config phycfg_ext;
+ int phymask = 0;
+ int i = 0;
+
+ memset(&phycfg_int, 0, sizeof(phycfg_int));
+ memset(&phycfg_ext, 0, sizeof(phycfg_ext));
+
+ pm8001_get_internal_phy_settings(pm8001_ha, &phycfg_int);
+ pm8001_get_external_phy_settings(pm8001_ha, &phycfg_ext);
+ pm8001_get_phy_mask(pm8001_ha, &phymask);
+
+ for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
+ if (phymask & (1 << i)) {/* Internal PHY */
+ pm8001_set_phy_profile_single(pm8001_ha, i,
+ sizeof(phycfg_int) / sizeof(u32),
+ (u32 *)&phycfg_int);
+
+ } else { /* External PHY */
+ pm8001_set_phy_profile_single(pm8001_ha, i,
+ sizeof(phycfg_ext) / sizeof(u32),
+ (u32 *)&phycfg_ext);
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * pm8001_configure_phy_settings - Configures PHY settings based on vendor ID.
+ * @pm8001_ha : our hba.
+ */
+static int pm8001_configure_phy_settings(struct pm8001_hba_info *pm8001_ha)
+{
+ switch (pm8001_ha->pdev->subsystem_vendor) {
+ case PCI_VENDOR_ID_ATTO:
+ if (pm8001_ha->pdev->device == 0x0042) /* 6Gb */
+ return 0;
+ else
+ return pm8001_set_phy_settings_ven_117c_12G(pm8001_ha);
+
+ case PCI_VENDOR_ID_ADAPTEC2:
+ case 0:
+ return 0;
+
+ default:
+ return pm8001_get_phy_settings_info(pm8001_ha);
+ }
+}
+
+#ifdef PM8001_USE_MSIX
+/**
+ * pm8001_setup_msix - enable MSI-X interrupt
+ * @pm8001_ha: our ha struct.
+ */
+static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha)
+{
+ unsigned int allocated_irq_vectors;
+ int rc;
+
+ /* SPCv controllers supports 64 msi-x */
+ if (pm8001_ha->chip_id == chip_8001) {
+ rc = pci_alloc_irq_vectors(pm8001_ha->pdev, 1, 1,
+ PCI_IRQ_MSIX);
+ } else {
+ /*
+ * Queue index #0 is used always for housekeeping, so don't
+ * include in the affinity spreading.
+ */
+ struct irq_affinity desc = {
+ .pre_vectors = 1,
+ };
+ rc = pci_alloc_irq_vectors_affinity(
+ pm8001_ha->pdev, 2, PM8001_MAX_MSIX_VEC,
+ PCI_IRQ_MSIX | PCI_IRQ_AFFINITY, &desc);
+ }
+
+ allocated_irq_vectors = rc;
+ if (rc < 0)
+ return rc;
+
+ /* Assigns the number of interrupts */
+ pm8001_ha->number_of_intr = allocated_irq_vectors;
+
+ /* Maximum queue number updating in HBA structure */
+ pm8001_ha->max_q_num = allocated_irq_vectors;
+
+ pm8001_dbg(pm8001_ha, INIT,
+ "pci_alloc_irq_vectors request ret:%d no of intr %d\n",
+ rc, pm8001_ha->number_of_intr);
+ return 0;
+}
+
+static u32 pm8001_request_msix(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 i = 0, j = 0;
+ int flag = 0, rc = 0;
+ int nr_irqs = pm8001_ha->number_of_intr;
+
+ if (pm8001_ha->chip_id != chip_8001)
+ flag &= ~IRQF_SHARED;
+
+ pm8001_dbg(pm8001_ha, INIT,
+ "pci_enable_msix request number of intr %d\n",
+ pm8001_ha->number_of_intr);
+
+ if (nr_irqs > ARRAY_SIZE(pm8001_ha->intr_drvname))
+ nr_irqs = ARRAY_SIZE(pm8001_ha->intr_drvname);
+
+ for (i = 0; i < nr_irqs; i++) {
+ snprintf(pm8001_ha->intr_drvname[i],
+ sizeof(pm8001_ha->intr_drvname[0]),
+ "%s-%d", pm8001_ha->name, i);
+ pm8001_ha->irq_vector[i].irq_id = i;
+ pm8001_ha->irq_vector[i].drv_inst = pm8001_ha;
+
+ rc = request_irq(pci_irq_vector(pm8001_ha->pdev, i),
+ pm8001_interrupt_handler_msix, flag,
+ pm8001_ha->intr_drvname[i],
+ &(pm8001_ha->irq_vector[i]));
+ if (rc) {
+ for (j = 0; j < i; j++) {
+ free_irq(pci_irq_vector(pm8001_ha->pdev, i),
+ &(pm8001_ha->irq_vector[i]));
+ }
+ pci_free_irq_vectors(pm8001_ha->pdev);
+ break;
+ }
+ }
+
+ return rc;
+}
+#endif
+
+/**
+ * pm8001_request_irq - register interrupt
+ * @pm8001_ha: our ha struct.
+ */
+static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha)
+{
+ struct pci_dev *pdev = pm8001_ha->pdev;
+#ifdef PM8001_USE_MSIX
+ int rc;
+
+ if (pci_find_capability(pdev, PCI_CAP_ID_MSIX)) {
+ rc = pm8001_setup_msix(pm8001_ha);
+ if (rc) {
+ pm8001_dbg(pm8001_ha, FAIL,
+ "pm8001_setup_irq failed [ret: %d]\n", rc);
+ return rc;
+ }
+
+ if (pdev->msix_cap && pci_msi_enabled())
+ return pm8001_request_msix(pm8001_ha);
+ }
+
+ pm8001_dbg(pm8001_ha, INIT, "MSIX not supported!!!\n");
+#endif
+
+ /* initialize the INT-X interrupt */
+ pm8001_ha->irq_vector[0].irq_id = 0;
+ pm8001_ha->irq_vector[0].drv_inst = pm8001_ha;
+
+ return request_irq(pdev->irq, pm8001_interrupt_handler_intx,
+ IRQF_SHARED, pm8001_ha->name,
+ SHOST_TO_SAS_HA(pm8001_ha->shost));
+}
+
+/**
+ * pm8001_pci_probe - probe supported device
+ * @pdev: pci device which kernel has been prepared for.
+ * @ent: pci device id
+ *
+ * This function is the main initialization function, when register a new
+ * pci driver it is invoked, all struct and hardware initialization should be
+ * done here, also, register interrupt.
+ */
+static int pm8001_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ unsigned int rc;
+ u32 pci_reg;
+ u8 i = 0;
+ struct pm8001_hba_info *pm8001_ha;
+ struct Scsi_Host *shost = NULL;
+ const struct pm8001_chip_info *chip;
+ struct sas_ha_struct *sha;
+
+ dev_printk(KERN_INFO, &pdev->dev,
+ "pm80xx: driver version %s\n", DRV_VERSION);
+ rc = pci_enable_device(pdev);
+ if (rc)
+ goto err_out_enable;
+ pci_set_master(pdev);
+ /*
+ * Enable pci slot busmaster by setting pci command register.
+ * This is required by FW for Cyclone card.
+ */
+
+ pci_read_config_dword(pdev, PCI_COMMAND, &pci_reg);
+ pci_reg |= 0x157;
+ pci_write_config_dword(pdev, PCI_COMMAND, pci_reg);
+ rc = pci_request_regions(pdev, DRV_NAME);
+ if (rc)
+ goto err_out_disable;
+ rc = pci_go_44(pdev);
+ if (rc)
+ goto err_out_regions;
+
+ shost = scsi_host_alloc(&pm8001_sht, sizeof(void *));
+ if (!shost) {
+ rc = -ENOMEM;
+ goto err_out_regions;
+ }
+ chip = &pm8001_chips[ent->driver_data];
+ sha = kzalloc(sizeof(struct sas_ha_struct), GFP_KERNEL);
+ if (!sha) {
+ rc = -ENOMEM;
+ goto err_out_free_host;
+ }
+ SHOST_TO_SAS_HA(shost) = sha;
+
+ rc = pm8001_prep_sas_ha_init(shost, chip);
+ if (rc) {
+ rc = -ENOMEM;
+ goto err_out_free;
+ }
+ pci_set_drvdata(pdev, SHOST_TO_SAS_HA(shost));
+ /* ent->driver variable is used to differentiate between controllers */
+ pm8001_ha = pm8001_pci_alloc(pdev, ent, shost);
+ if (!pm8001_ha) {
+ rc = -ENOMEM;
+ goto err_out_free;
+ }
+
+ PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
+ rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
+ if (rc) {
+ pm8001_dbg(pm8001_ha, FAIL,
+ "chip_init failed [ret: %d]\n", rc);
+ goto err_out_ha_free;
+ }
+
+ rc = pm8001_init_ccb_tag(pm8001_ha);
+ if (rc)
+ goto err_out_enable;
+
+
+ PM8001_CHIP_DISP->chip_post_init(pm8001_ha);
+
+ if (pm8001_ha->number_of_intr > 1) {
+ shost->nr_hw_queues = pm8001_ha->number_of_intr - 1;
+ /*
+ * For now, ensure we're not sent too many commands by setting
+ * host_tagset. This is also required if we start using request
+ * tag.
+ */
+ shost->host_tagset = 1;
+ }
+
+ rc = scsi_add_host(shost, &pdev->dev);
+ if (rc)
+ goto err_out_ha_free;
+
+ PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, 0);
+ if (pm8001_ha->chip_id != chip_8001) {
+ for (i = 1; i < pm8001_ha->number_of_intr; i++)
+ PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, i);
+ /* setup thermal configuration. */
+ pm80xx_set_thermal_config(pm8001_ha);
+ }
+
+ rc = pm8001_init_sas_add(pm8001_ha);
+ if (rc)
+ goto err_out_shost;
+ /* phy setting support for motherboard controller */
+ rc = pm8001_configure_phy_settings(pm8001_ha);
+ if (rc)
+ goto err_out_shost;
+
+ pm8001_post_sas_ha_init(shost, chip);
+ rc = sas_register_ha(SHOST_TO_SAS_HA(shost));
+ if (rc) {
+ pm8001_dbg(pm8001_ha, FAIL,
+ "sas_register_ha failed [ret: %d]\n", rc);
+ goto err_out_shost;
+ }
+ list_add_tail(&pm8001_ha->list, &hba_list);
+ pm8001_ha->flags = PM8001F_RUN_TIME;
+ scsi_scan_host(pm8001_ha->shost);
+ return 0;
+
+err_out_shost:
+ scsi_remove_host(pm8001_ha->shost);
+err_out_ha_free:
+ pm8001_free(pm8001_ha);
+err_out_free:
+ kfree(sha);
+err_out_free_host:
+ scsi_host_put(shost);
+err_out_regions:
+ pci_release_regions(pdev);
+err_out_disable:
+ pci_disable_device(pdev);
+err_out_enable:
+ return rc;
+}
+
+/**
+ * pm8001_init_ccb_tag - allocate memory to CCB and tag.
+ * @pm8001_ha: our hba card information.
+ */
+static int pm8001_init_ccb_tag(struct pm8001_hba_info *pm8001_ha)
+{
+ struct Scsi_Host *shost = pm8001_ha->shost;
+ struct device *dev = pm8001_ha->dev;
+ u32 max_out_io, ccb_count;
+ int i;
+
+ max_out_io = pm8001_ha->main_cfg_tbl.pm80xx_tbl.max_out_io;
+ ccb_count = min_t(int, PM8001_MAX_CCB, max_out_io);
+
+ shost->can_queue = ccb_count - PM8001_RESERVE_SLOT;
+
+ pm8001_ha->rsvd_tags = bitmap_zalloc(PM8001_RESERVE_SLOT, GFP_KERNEL);
+ if (!pm8001_ha->rsvd_tags)
+ goto err_out;
+
+ /* Memory region for ccb_info*/
+ pm8001_ha->ccb_count = ccb_count;
+ pm8001_ha->ccb_info =
+ kcalloc(ccb_count, sizeof(struct pm8001_ccb_info), GFP_KERNEL);
+ if (!pm8001_ha->ccb_info) {
+ pm8001_dbg(pm8001_ha, FAIL,
+ "Unable to allocate memory for ccb\n");
+ goto err_out_noccb;
+ }
+ for (i = 0; i < ccb_count; i++) {
+ pm8001_ha->ccb_info[i].buf_prd = dma_alloc_coherent(dev,
+ sizeof(struct pm8001_prd) * PM8001_MAX_DMA_SG,
+ &pm8001_ha->ccb_info[i].ccb_dma_handle,
+ GFP_KERNEL);
+ if (!pm8001_ha->ccb_info[i].buf_prd) {
+ pm8001_dbg(pm8001_ha, FAIL,
+ "ccb prd memory allocation error\n");
+ goto err_out;
+ }
+ pm8001_ha->ccb_info[i].task = NULL;
+ pm8001_ha->ccb_info[i].ccb_tag = PM8001_INVALID_TAG;
+ pm8001_ha->ccb_info[i].device = NULL;
+ }
+
+ return 0;
+
+err_out_noccb:
+ kfree(pm8001_ha->devices);
+err_out:
+ return -ENOMEM;
+}
+
+static void pm8001_pci_remove(struct pci_dev *pdev)
+{
+ struct sas_ha_struct *sha = pci_get_drvdata(pdev);
+ struct pm8001_hba_info *pm8001_ha;
+ int i, j;
+ pm8001_ha = sha->lldd_ha;
+ sas_unregister_ha(sha);
+ sas_remove_host(pm8001_ha->shost);
+ list_del(&pm8001_ha->list);
+ PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
+ PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
+
+#ifdef PM8001_USE_MSIX
+ for (i = 0; i < pm8001_ha->number_of_intr; i++)
+ synchronize_irq(pci_irq_vector(pdev, i));
+ for (i = 0; i < pm8001_ha->number_of_intr; i++)
+ free_irq(pci_irq_vector(pdev, i), &pm8001_ha->irq_vector[i]);
+ pci_free_irq_vectors(pdev);
+#else
+ free_irq(pm8001_ha->irq, sha);
+#endif
+#ifdef PM8001_USE_TASKLET
+ /* For non-msix and msix interrupts */
+ if ((!pdev->msix_cap || !pci_msi_enabled()) ||
+ (pm8001_ha->chip_id == chip_8001))
+ tasklet_kill(&pm8001_ha->tasklet[0]);
+ else
+ for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
+ tasklet_kill(&pm8001_ha->tasklet[j]);
+#endif
+ scsi_host_put(pm8001_ha->shost);
+
+ for (i = 0; i < pm8001_ha->ccb_count; i++) {
+ dma_free_coherent(&pm8001_ha->pdev->dev,
+ sizeof(struct pm8001_prd) * PM8001_MAX_DMA_SG,
+ pm8001_ha->ccb_info[i].buf_prd,
+ pm8001_ha->ccb_info[i].ccb_dma_handle);
+ }
+ kfree(pm8001_ha->ccb_info);
+ kfree(pm8001_ha->devices);
+
+ pm8001_free(pm8001_ha);
+ kfree(sha->sas_phy);
+ kfree(sha->sas_port);
+ kfree(sha);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+}
+
+/**
+ * pm8001_pci_suspend - power management suspend main entry point
+ * @dev: Device struct
+ *
+ * Return: 0 on success, anything else on error.
+ */
+static int __maybe_unused pm8001_pci_suspend(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct sas_ha_struct *sha = pci_get_drvdata(pdev);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+ int i, j;
+ sas_suspend_ha(sha);
+ flush_workqueue(pm8001_wq);
+ scsi_block_requests(pm8001_ha->shost);
+ if (!pdev->pm_cap) {
+ dev_err(dev, " PCI PM not supported\n");
+ return -ENODEV;
+ }
+ PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
+ PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
+#ifdef PM8001_USE_MSIX
+ for (i = 0; i < pm8001_ha->number_of_intr; i++)
+ synchronize_irq(pci_irq_vector(pdev, i));
+ for (i = 0; i < pm8001_ha->number_of_intr; i++)
+ free_irq(pci_irq_vector(pdev, i), &pm8001_ha->irq_vector[i]);
+ pci_free_irq_vectors(pdev);
+#else
+ free_irq(pm8001_ha->irq, sha);
+#endif
+#ifdef PM8001_USE_TASKLET
+ /* For non-msix and msix interrupts */
+ if ((!pdev->msix_cap || !pci_msi_enabled()) ||
+ (pm8001_ha->chip_id == chip_8001))
+ tasklet_kill(&pm8001_ha->tasklet[0]);
+ else
+ for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
+ tasklet_kill(&pm8001_ha->tasklet[j]);
+#endif
+ pm8001_info(pm8001_ha, "pdev=0x%p, slot=%s, entering "
+ "suspended state\n", pdev,
+ pm8001_ha->name);
+ return 0;
+}
+
+/**
+ * pm8001_pci_resume - power management resume main entry point
+ * @dev: Device struct
+ *
+ * Return: 0 on success, anything else on error.
+ */
+static int __maybe_unused pm8001_pci_resume(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct sas_ha_struct *sha = pci_get_drvdata(pdev);
+ struct pm8001_hba_info *pm8001_ha;
+ int rc;
+ u8 i = 0, j;
+ DECLARE_COMPLETION_ONSTACK(completion);
+
+ pm8001_ha = sha->lldd_ha;
+
+ pm8001_info(pm8001_ha,
+ "pdev=0x%p, slot=%s, resuming from previous operating state [D%d]\n",
+ pdev, pm8001_ha->name, pdev->current_state);
+
+ rc = pci_go_44(pdev);
+ if (rc)
+ goto err_out_disable;
+ sas_prep_resume_ha(sha);
+ /* chip soft rst only for spc */
+ if (pm8001_ha->chip_id == chip_8001) {
+ PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
+ pm8001_dbg(pm8001_ha, INIT, "chip soft reset successful\n");
+ }
+ rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
+ if (rc)
+ goto err_out_disable;
+
+ /* disable all the interrupt bits */
+ PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
+
+ rc = pm8001_request_irq(pm8001_ha);
+ if (rc)
+ goto err_out_disable;
+#ifdef PM8001_USE_TASKLET
+ /* Tasklet for non msi-x interrupt handler */
+ if ((!pdev->msix_cap || !pci_msi_enabled()) ||
+ (pm8001_ha->chip_id == chip_8001))
+ tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet,
+ (unsigned long)&(pm8001_ha->irq_vector[0]));
+ else
+ for (j = 0; j < PM8001_MAX_MSIX_VEC; j++)
+ tasklet_init(&pm8001_ha->tasklet[j], pm8001_tasklet,
+ (unsigned long)&(pm8001_ha->irq_vector[j]));
+#endif
+ PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, 0);
+ if (pm8001_ha->chip_id != chip_8001) {
+ for (i = 1; i < pm8001_ha->number_of_intr; i++)
+ PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, i);
+ }
+
+ /* Chip documentation for the 8070 and 8072 SPCv */
+ /* states that a 500ms minimum delay is required */
+ /* before issuing commands. Otherwise, the firmware */
+ /* will enter an unrecoverable state. */
+
+ if (pm8001_ha->chip_id == chip_8070 ||
+ pm8001_ha->chip_id == chip_8072) {
+ mdelay(500);
+ }
+
+ /* Spin up the PHYs */
+
+ pm8001_ha->flags = PM8001F_RUN_TIME;
+ for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
+ pm8001_ha->phy[i].enable_completion = &completion;
+ PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i);
+ wait_for_completion(&completion);
+ }
+ sas_resume_ha(sha);
+ return 0;
+
+err_out_disable:
+ scsi_remove_host(pm8001_ha->shost);
+
+ return rc;
+}
+
+/* update of pci device, vendor id and driver data with
+ * unique value for each of the controller
+ */
+static struct pci_device_id pm8001_pci_table[] = {
+ { PCI_VDEVICE(PMC_Sierra, 0x8001), chip_8001 },
+ { PCI_VDEVICE(PMC_Sierra, 0x8006), chip_8006 },
+ { PCI_VDEVICE(ADAPTEC2, 0x8006), chip_8006 },
+ { PCI_VDEVICE(ATTO, 0x0042), chip_8001 },
+ /* Support for SPC/SPCv/SPCve controllers */
+ { PCI_VDEVICE(ADAPTEC2, 0x8001), chip_8001 },
+ { PCI_VDEVICE(PMC_Sierra, 0x8008), chip_8008 },
+ { PCI_VDEVICE(ADAPTEC2, 0x8008), chip_8008 },
+ { PCI_VDEVICE(PMC_Sierra, 0x8018), chip_8018 },
+ { PCI_VDEVICE(ADAPTEC2, 0x8018), chip_8018 },
+ { PCI_VDEVICE(PMC_Sierra, 0x8009), chip_8009 },
+ { PCI_VDEVICE(ADAPTEC2, 0x8009), chip_8009 },
+ { PCI_VDEVICE(PMC_Sierra, 0x8019), chip_8019 },
+ { PCI_VDEVICE(ADAPTEC2, 0x8019), chip_8019 },
+ { PCI_VDEVICE(PMC_Sierra, 0x8074), chip_8074 },
+ { PCI_VDEVICE(ADAPTEC2, 0x8074), chip_8074 },
+ { PCI_VDEVICE(PMC_Sierra, 0x8076), chip_8076 },
+ { PCI_VDEVICE(ADAPTEC2, 0x8076), chip_8076 },
+ { PCI_VDEVICE(PMC_Sierra, 0x8077), chip_8077 },
+ { PCI_VDEVICE(ADAPTEC2, 0x8077), chip_8077 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8081,
+ PCI_VENDOR_ID_ADAPTEC2, 0x0400, 0, 0, chip_8001 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8081,
+ PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8001 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
+ PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8008 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
+ PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8008 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
+ PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8009 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
+ PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8009 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
+ PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8018 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
+ PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8018 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
+ PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8019 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
+ PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8019 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8074,
+ PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8074 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8076,
+ PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8076 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8077,
+ PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8077 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8074,
+ PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8074 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8076,
+ PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8076 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8077,
+ PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8077 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8076,
+ PCI_VENDOR_ID_ADAPTEC2, 0x0808, 0, 0, chip_8076 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8077,
+ PCI_VENDOR_ID_ADAPTEC2, 0x0808, 0, 0, chip_8077 },
+ { PCI_VENDOR_ID_ADAPTEC2, 0x8074,
+ PCI_VENDOR_ID_ADAPTEC2, 0x0404, 0, 0, chip_8074 },
+ { PCI_VENDOR_ID_ATTO, 0x8070,
+ PCI_VENDOR_ID_ATTO, 0x0070, 0, 0, chip_8070 },
+ { PCI_VENDOR_ID_ATTO, 0x8070,
+ PCI_VENDOR_ID_ATTO, 0x0071, 0, 0, chip_8070 },
+ { PCI_VENDOR_ID_ATTO, 0x8072,
+ PCI_VENDOR_ID_ATTO, 0x0072, 0, 0, chip_8072 },
+ { PCI_VENDOR_ID_ATTO, 0x8072,
+ PCI_VENDOR_ID_ATTO, 0x0073, 0, 0, chip_8072 },
+ { PCI_VENDOR_ID_ATTO, 0x8070,
+ PCI_VENDOR_ID_ATTO, 0x0080, 0, 0, chip_8070 },
+ { PCI_VENDOR_ID_ATTO, 0x8072,
+ PCI_VENDOR_ID_ATTO, 0x0081, 0, 0, chip_8072 },
+ { PCI_VENDOR_ID_ATTO, 0x8072,
+ PCI_VENDOR_ID_ATTO, 0x0082, 0, 0, chip_8072 },
+ {} /* terminate list */
+};
+
+static SIMPLE_DEV_PM_OPS(pm8001_pci_pm_ops,
+ pm8001_pci_suspend,
+ pm8001_pci_resume);
+
+static struct pci_driver pm8001_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = pm8001_pci_table,
+ .probe = pm8001_pci_probe,
+ .remove = pm8001_pci_remove,
+ .driver.pm = &pm8001_pci_pm_ops,
+};
+
+/**
+ * pm8001_init - initialize scsi transport template
+ */
+static int __init pm8001_init(void)
+{
+ int rc = -ENOMEM;
+
+ pm8001_wq = alloc_workqueue("pm80xx", 0, 0);
+ if (!pm8001_wq)
+ goto err;
+
+ pm8001_id = 0;
+ pm8001_stt = sas_domain_attach_transport(&pm8001_transport_ops);
+ if (!pm8001_stt)
+ goto err_wq;
+ rc = pci_register_driver(&pm8001_pci_driver);
+ if (rc)
+ goto err_tp;
+ return 0;
+
+err_tp:
+ sas_release_transport(pm8001_stt);
+err_wq:
+ destroy_workqueue(pm8001_wq);
+err:
+ return rc;
+}
+
+static void __exit pm8001_exit(void)
+{
+ pci_unregister_driver(&pm8001_pci_driver);
+ sas_release_transport(pm8001_stt);
+ destroy_workqueue(pm8001_wq);
+}
+
+module_init(pm8001_init);
+module_exit(pm8001_exit);
+
+MODULE_AUTHOR("Jack Wang <jack_wang@usish.com>");
+MODULE_AUTHOR("Anand Kumar Santhanam <AnandKumar.Santhanam@pmcs.com>");
+MODULE_AUTHOR("Sangeetha Gnanasekaran <Sangeetha.Gnanasekaran@pmcs.com>");
+MODULE_AUTHOR("Nikith Ganigarakoppal <Nikith.Ganigarakoppal@pmcs.com>");
+MODULE_DESCRIPTION(
+ "PMC-Sierra PM8001/8006/8081/8088/8089/8074/8076/8077/8070/8072 "
+ "SAS/SATA controller driver");
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, pm8001_pci_table);
+
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
new file mode 100644
index 0000000000..a5a31dfa45
--- /dev/null
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -0,0 +1,1195 @@
+/*
+ * PMC-Sierra PM8001/8081/8088/8089 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#include <linux/slab.h>
+#include "pm8001_sas.h"
+#include "pm80xx_tracepoints.h"
+
+/**
+ * pm8001_find_tag - from sas task to find out tag that belongs to this task
+ * @task: the task sent to the LLDD
+ * @tag: the found tag associated with the task
+ */
+static int pm8001_find_tag(struct sas_task *task, u32 *tag)
+{
+ if (task->lldd_task) {
+ struct pm8001_ccb_info *ccb;
+ ccb = task->lldd_task;
+ *tag = ccb->ccb_tag;
+ return 1;
+ }
+ return 0;
+}
+
+/**
+ * pm8001_tag_free - free the no more needed tag
+ * @pm8001_ha: our hba struct
+ * @tag: the found tag associated with the task
+ */
+void pm8001_tag_free(struct pm8001_hba_info *pm8001_ha, u32 tag)
+{
+ void *bitmap = pm8001_ha->rsvd_tags;
+ unsigned long flags;
+
+ if (tag >= PM8001_RESERVE_SLOT)
+ return;
+
+ spin_lock_irqsave(&pm8001_ha->bitmap_lock, flags);
+ __clear_bit(tag, bitmap);
+ spin_unlock_irqrestore(&pm8001_ha->bitmap_lock, flags);
+}
+
+/**
+ * pm8001_tag_alloc - allocate a empty tag for task used.
+ * @pm8001_ha: our hba struct
+ * @tag_out: the found empty tag .
+ */
+int pm8001_tag_alloc(struct pm8001_hba_info *pm8001_ha, u32 *tag_out)
+{
+ void *bitmap = pm8001_ha->rsvd_tags;
+ unsigned long flags;
+ unsigned int tag;
+
+ spin_lock_irqsave(&pm8001_ha->bitmap_lock, flags);
+ tag = find_first_zero_bit(bitmap, PM8001_RESERVE_SLOT);
+ if (tag >= PM8001_RESERVE_SLOT) {
+ spin_unlock_irqrestore(&pm8001_ha->bitmap_lock, flags);
+ return -SAS_QUEUE_FULL;
+ }
+ __set_bit(tag, bitmap);
+ spin_unlock_irqrestore(&pm8001_ha->bitmap_lock, flags);
+
+ /* reserved tags are in the lower region of the tagset */
+ *tag_out = tag;
+ return 0;
+}
+
+/**
+ * pm8001_mem_alloc - allocate memory for pm8001.
+ * @pdev: pci device.
+ * @virt_addr: the allocated virtual address
+ * @pphys_addr: DMA address for this device
+ * @pphys_addr_hi: the physical address high byte address.
+ * @pphys_addr_lo: the physical address low byte address.
+ * @mem_size: memory size.
+ * @align: requested byte alignment
+ */
+int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr,
+ dma_addr_t *pphys_addr, u32 *pphys_addr_hi,
+ u32 *pphys_addr_lo, u32 mem_size, u32 align)
+{
+ caddr_t mem_virt_alloc;
+ dma_addr_t mem_dma_handle;
+ u64 phys_align;
+ u64 align_offset = 0;
+ if (align)
+ align_offset = (dma_addr_t)align - 1;
+ mem_virt_alloc = dma_alloc_coherent(&pdev->dev, mem_size + align,
+ &mem_dma_handle, GFP_KERNEL);
+ if (!mem_virt_alloc)
+ return -ENOMEM;
+ *pphys_addr = mem_dma_handle;
+ phys_align = (*pphys_addr + align_offset) & ~align_offset;
+ *virt_addr = (void *)mem_virt_alloc + phys_align - *pphys_addr;
+ *pphys_addr_hi = upper_32_bits(phys_align);
+ *pphys_addr_lo = lower_32_bits(phys_align);
+ return 0;
+}
+
+/**
+ * pm8001_find_ha_by_dev - from domain device which come from sas layer to
+ * find out our hba struct.
+ * @dev: the domain device which from sas layer.
+ */
+static
+struct pm8001_hba_info *pm8001_find_ha_by_dev(struct domain_device *dev)
+{
+ struct sas_ha_struct *sha = dev->port->ha;
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+ return pm8001_ha;
+}
+
+/**
+ * pm8001_phy_control - this function should be registered to
+ * sas_domain_function_template to provide libsas used, note: this is just
+ * control the HBA phy rather than other expander phy if you want control
+ * other phy, you should use SMP command.
+ * @sas_phy: which phy in HBA phys.
+ * @func: the operation.
+ * @funcdata: always NULL.
+ */
+int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
+ void *funcdata)
+{
+ int rc = 0, phy_id = sas_phy->id;
+ struct pm8001_hba_info *pm8001_ha = NULL;
+ struct sas_phy_linkrates *rates;
+ struct pm8001_phy *phy;
+ DECLARE_COMPLETION_ONSTACK(completion);
+ unsigned long flags;
+ pm8001_ha = sas_phy->ha->lldd_ha;
+ phy = &pm8001_ha->phy[phy_id];
+ pm8001_ha->phy[phy_id].enable_completion = &completion;
+
+ if (PM8001_CHIP_DISP->fatal_errors(pm8001_ha)) {
+ /*
+ * If the controller is in fatal error state,
+ * we will not get a response from the controller
+ */
+ pm8001_dbg(pm8001_ha, FAIL,
+ "Phy control failed due to fatal errors\n");
+ return -EFAULT;
+ }
+
+ switch (func) {
+ case PHY_FUNC_SET_LINK_RATE:
+ rates = funcdata;
+ if (rates->minimum_linkrate) {
+ pm8001_ha->phy[phy_id].minimum_linkrate =
+ rates->minimum_linkrate;
+ }
+ if (rates->maximum_linkrate) {
+ pm8001_ha->phy[phy_id].maximum_linkrate =
+ rates->maximum_linkrate;
+ }
+ if (pm8001_ha->phy[phy_id].phy_state == PHY_LINK_DISABLE) {
+ PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
+ wait_for_completion(&completion);
+ }
+ PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
+ PHY_LINK_RESET);
+ break;
+ case PHY_FUNC_HARD_RESET:
+ if (pm8001_ha->phy[phy_id].phy_state == PHY_LINK_DISABLE) {
+ PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
+ wait_for_completion(&completion);
+ }
+ PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
+ PHY_HARD_RESET);
+ break;
+ case PHY_FUNC_LINK_RESET:
+ if (pm8001_ha->phy[phy_id].phy_state == PHY_LINK_DISABLE) {
+ PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
+ wait_for_completion(&completion);
+ }
+ PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
+ PHY_LINK_RESET);
+ break;
+ case PHY_FUNC_RELEASE_SPINUP_HOLD:
+ PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
+ PHY_LINK_RESET);
+ break;
+ case PHY_FUNC_DISABLE:
+ if (pm8001_ha->chip_id != chip_8001) {
+ if (pm8001_ha->phy[phy_id].phy_state ==
+ PHY_STATE_LINK_UP_SPCV) {
+ sas_phy_disconnected(&phy->sas_phy);
+ sas_notify_phy_event(&phy->sas_phy,
+ PHYE_LOSS_OF_SIGNAL, GFP_KERNEL);
+ phy->phy_attached = 0;
+ }
+ } else {
+ if (pm8001_ha->phy[phy_id].phy_state ==
+ PHY_STATE_LINK_UP_SPC) {
+ sas_phy_disconnected(&phy->sas_phy);
+ sas_notify_phy_event(&phy->sas_phy,
+ PHYE_LOSS_OF_SIGNAL, GFP_KERNEL);
+ phy->phy_attached = 0;
+ }
+ }
+ PM8001_CHIP_DISP->phy_stop_req(pm8001_ha, phy_id);
+ break;
+ case PHY_FUNC_GET_EVENTS:
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+ if (pm8001_ha->chip_id == chip_8001) {
+ if (-1 == pm8001_bar4_shift(pm8001_ha,
+ (phy_id < 4) ? 0x30000 : 0x40000)) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ return -EINVAL;
+ }
+ }
+ {
+ struct sas_phy *phy = sas_phy->phy;
+ u32 __iomem *qp = pm8001_ha->io_mem[2].memvirtaddr
+ + 0x1034 + (0x4000 * (phy_id & 3));
+
+ phy->invalid_dword_count = readl(qp);
+ phy->running_disparity_error_count = readl(&qp[1]);
+ phy->loss_of_dword_sync_count = readl(&qp[3]);
+ phy->phy_reset_problem_count = readl(&qp[4]);
+ }
+ if (pm8001_ha->chip_id == chip_8001)
+ pm8001_bar4_shift(pm8001_ha, 0);
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ return 0;
+ default:
+ pm8001_dbg(pm8001_ha, DEVIO, "func 0x%x\n", func);
+ rc = -EOPNOTSUPP;
+ }
+ msleep(300);
+ return rc;
+}
+
+/**
+ * pm8001_scan_start - we should enable all HBA phys by sending the phy_start
+ * command to HBA.
+ * @shost: the scsi host data.
+ */
+void pm8001_scan_start(struct Scsi_Host *shost)
+{
+ int i;
+ struct pm8001_hba_info *pm8001_ha;
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ DECLARE_COMPLETION_ONSTACK(completion);
+ pm8001_ha = sha->lldd_ha;
+ /* SAS_RE_INITIALIZATION not available in SPCv/ve */
+ if (pm8001_ha->chip_id == chip_8001)
+ PM8001_CHIP_DISP->sas_re_init_req(pm8001_ha);
+ for (i = 0; i < pm8001_ha->chip->n_phy; ++i) {
+ pm8001_ha->phy[i].enable_completion = &completion;
+ PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i);
+ wait_for_completion(&completion);
+ msleep(300);
+ }
+}
+
+int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time)
+{
+ struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
+
+ /* give the phy enabling interrupt event time to come in (1s
+ * is empirically about all it takes) */
+ if (time < HZ)
+ return 0;
+ /* Wait for discovery to finish */
+ sas_drain_work(ha);
+ return 1;
+}
+
+/**
+ * pm8001_task_prep_smp - the dispatcher function, prepare data for smp task
+ * @pm8001_ha: our hba card information
+ * @ccb: the ccb which attached to smp task
+ */
+static int pm8001_task_prep_smp(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb)
+{
+ return PM8001_CHIP_DISP->smp_req(pm8001_ha, ccb);
+}
+
+u32 pm8001_get_ncq_tag(struct sas_task *task, u32 *tag)
+{
+ struct ata_queued_cmd *qc = task->uldd_task;
+
+ if (qc && ata_is_ncq(qc->tf.protocol)) {
+ *tag = qc->tag;
+ return 1;
+ }
+
+ return 0;
+}
+
+/**
+ * pm8001_task_prep_ata - the dispatcher function, prepare data for sata task
+ * @pm8001_ha: our hba card information
+ * @ccb: the ccb which attached to sata task
+ */
+static int pm8001_task_prep_ata(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb)
+{
+ return PM8001_CHIP_DISP->sata_req(pm8001_ha, ccb);
+}
+
+/**
+ * pm8001_task_prep_internal_abort - the dispatcher function, prepare data
+ * for internal abort task
+ * @pm8001_ha: our hba card information
+ * @ccb: the ccb which attached to sata task
+ */
+static int pm8001_task_prep_internal_abort(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb)
+{
+ return PM8001_CHIP_DISP->task_abort(pm8001_ha, ccb);
+}
+
+/**
+ * pm8001_task_prep_ssp_tm - the dispatcher function, prepare task management data
+ * @pm8001_ha: our hba card information
+ * @ccb: the ccb which attached to TM
+ * @tmf: the task management IU
+ */
+static int pm8001_task_prep_ssp_tm(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb, struct sas_tmf_task *tmf)
+{
+ return PM8001_CHIP_DISP->ssp_tm_req(pm8001_ha, ccb, tmf);
+}
+
+/**
+ * pm8001_task_prep_ssp - the dispatcher function, prepare ssp data for ssp task
+ * @pm8001_ha: our hba card information
+ * @ccb: the ccb which attached to ssp task
+ */
+static int pm8001_task_prep_ssp(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb)
+{
+ return PM8001_CHIP_DISP->ssp_io_req(pm8001_ha, ccb);
+}
+
+ /* Find the local port id that's attached to this device */
+static int sas_find_local_port_id(struct domain_device *dev)
+{
+ struct domain_device *pdev = dev->parent;
+
+ /* Directly attached device */
+ if (!pdev)
+ return dev->port->id;
+ while (pdev) {
+ struct domain_device *pdev_p = pdev->parent;
+ if (!pdev_p)
+ return pdev->port->id;
+ pdev = pdev->parent;
+ }
+ return 0;
+}
+
+#define DEV_IS_GONE(pm8001_dev) \
+ ((!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED)))
+
+
+static int pm8001_deliver_command(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb)
+{
+ struct sas_task *task = ccb->task;
+ enum sas_protocol task_proto = task->task_proto;
+ struct sas_tmf_task *tmf = task->tmf;
+ int is_tmf = !!tmf;
+
+ switch (task_proto) {
+ case SAS_PROTOCOL_SMP:
+ return pm8001_task_prep_smp(pm8001_ha, ccb);
+ case SAS_PROTOCOL_SSP:
+ if (is_tmf)
+ return pm8001_task_prep_ssp_tm(pm8001_ha, ccb, tmf);
+ return pm8001_task_prep_ssp(pm8001_ha, ccb);
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
+ return pm8001_task_prep_ata(pm8001_ha, ccb);
+ case SAS_PROTOCOL_INTERNAL_ABORT:
+ return pm8001_task_prep_internal_abort(pm8001_ha, ccb);
+ default:
+ dev_err(pm8001_ha->dev, "unknown sas_task proto: 0x%x\n",
+ task_proto);
+ }
+
+ return -EINVAL;
+}
+
+/**
+ * pm8001_queue_command - register for upper layer used, all IO commands sent
+ * to HBA are from this interface.
+ * @task: the task to be execute.
+ * @gfp_flags: gfp_flags
+ */
+int pm8001_queue_command(struct sas_task *task, gfp_t gfp_flags)
+{
+ struct task_status_struct *ts = &task->task_status;
+ enum sas_protocol task_proto = task->task_proto;
+ struct domain_device *dev = task->dev;
+ struct pm8001_device *pm8001_dev = dev->lldd_dev;
+ bool internal_abort = sas_is_internal_abort(task);
+ struct pm8001_hba_info *pm8001_ha;
+ struct pm8001_port *port = NULL;
+ struct pm8001_ccb_info *ccb;
+ unsigned long flags;
+ u32 n_elem = 0;
+ int rc = 0;
+
+ if (!internal_abort && !dev->port) {
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_PHY_DOWN;
+ if (dev->dev_type != SAS_SATA_DEV)
+ task->task_done(task);
+ return 0;
+ }
+
+ pm8001_ha = pm8001_find_ha_by_dev(dev);
+ if (pm8001_ha->controller_fatal_error) {
+ ts->resp = SAS_TASK_UNDELIVERED;
+ task->task_done(task);
+ return 0;
+ }
+
+ pm8001_dbg(pm8001_ha, IO, "pm8001_task_exec device\n");
+
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+
+ pm8001_dev = dev->lldd_dev;
+ port = &pm8001_ha->port[sas_find_local_port_id(dev)];
+
+ if (!internal_abort &&
+ (DEV_IS_GONE(pm8001_dev) || !port->port_attached)) {
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_PHY_DOWN;
+ if (sas_protocol_ata(task_proto)) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ task->task_done(task);
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+ } else {
+ task->task_done(task);
+ }
+ rc = -ENODEV;
+ goto err_out;
+ }
+
+ ccb = pm8001_ccb_alloc(pm8001_ha, pm8001_dev, task);
+ if (!ccb) {
+ rc = -SAS_QUEUE_FULL;
+ goto err_out;
+ }
+
+ if (!sas_protocol_ata(task_proto)) {
+ if (task->num_scatter) {
+ n_elem = dma_map_sg(pm8001_ha->dev, task->scatter,
+ task->num_scatter, task->data_dir);
+ if (!n_elem) {
+ rc = -ENOMEM;
+ goto err_out_ccb;
+ }
+ }
+ } else {
+ n_elem = task->num_scatter;
+ }
+
+ task->lldd_task = ccb;
+ ccb->n_elem = n_elem;
+
+ atomic_inc(&pm8001_dev->running_req);
+
+ rc = pm8001_deliver_command(pm8001_ha, ccb);
+ if (rc) {
+ atomic_dec(&pm8001_dev->running_req);
+ if (!sas_protocol_ata(task_proto) && n_elem)
+ dma_unmap_sg(pm8001_ha->dev, task->scatter,
+ task->num_scatter, task->data_dir);
+err_out_ccb:
+ pm8001_ccb_free(pm8001_ha, ccb);
+
+err_out:
+ pm8001_dbg(pm8001_ha, IO, "pm8001_task_exec failed[%d]!\n", rc);
+ }
+
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+
+ return rc;
+}
+
+/**
+ * pm8001_ccb_task_free - free the sg for ssp and smp command, free the ccb.
+ * @pm8001_ha: our hba card information
+ * @ccb: the ccb which attached to ssp task to free
+ */
+void pm8001_ccb_task_free(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb)
+{
+ struct sas_task *task = ccb->task;
+ struct ata_queued_cmd *qc;
+ struct pm8001_device *pm8001_dev;
+
+ if (!task)
+ return;
+
+ if (!sas_protocol_ata(task->task_proto) && ccb->n_elem)
+ dma_unmap_sg(pm8001_ha->dev, task->scatter,
+ task->num_scatter, task->data_dir);
+
+ switch (task->task_proto) {
+ case SAS_PROTOCOL_SMP:
+ dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_resp, 1,
+ DMA_FROM_DEVICE);
+ dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_req, 1,
+ DMA_TO_DEVICE);
+ break;
+
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
+ case SAS_PROTOCOL_SSP:
+ default:
+ /* do nothing */
+ break;
+ }
+
+ if (sas_protocol_ata(task->task_proto)) {
+ /* For SCSI/ATA commands uldd_task points to ata_queued_cmd */
+ qc = task->uldd_task;
+ pm8001_dev = ccb->device;
+ trace_pm80xx_request_complete(pm8001_ha->id,
+ pm8001_dev ? pm8001_dev->attached_phy : PM8001_MAX_PHYS,
+ ccb->ccb_tag, 0 /* ctlr_opcode not known */,
+ qc ? qc->tf.command : 0, // ata opcode
+ pm8001_dev ? atomic_read(&pm8001_dev->running_req) : -1);
+ }
+
+ task->lldd_task = NULL;
+ pm8001_ccb_free(pm8001_ha, ccb);
+}
+
+/**
+ * pm8001_alloc_dev - find a empty pm8001_device
+ * @pm8001_ha: our hba card information
+ */
+static struct pm8001_device *pm8001_alloc_dev(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 dev;
+ for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) {
+ if (pm8001_ha->devices[dev].dev_type == SAS_PHY_UNUSED) {
+ pm8001_ha->devices[dev].id = dev;
+ return &pm8001_ha->devices[dev];
+ }
+ }
+ if (dev == PM8001_MAX_DEVICES) {
+ pm8001_dbg(pm8001_ha, FAIL,
+ "max support %d devices, ignore ..\n",
+ PM8001_MAX_DEVICES);
+ }
+ return NULL;
+}
+/**
+ * pm8001_find_dev - find a matching pm8001_device
+ * @pm8001_ha: our hba card information
+ * @device_id: device ID to match against
+ */
+struct pm8001_device *pm8001_find_dev(struct pm8001_hba_info *pm8001_ha,
+ u32 device_id)
+{
+ u32 dev;
+ for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) {
+ if (pm8001_ha->devices[dev].device_id == device_id)
+ return &pm8001_ha->devices[dev];
+ }
+ if (dev == PM8001_MAX_DEVICES) {
+ pm8001_dbg(pm8001_ha, FAIL, "NO MATCHING DEVICE FOUND !!!\n");
+ }
+ return NULL;
+}
+
+void pm8001_free_dev(struct pm8001_device *pm8001_dev)
+{
+ u32 id = pm8001_dev->id;
+ memset(pm8001_dev, 0, sizeof(*pm8001_dev));
+ pm8001_dev->id = id;
+ pm8001_dev->dev_type = SAS_PHY_UNUSED;
+ pm8001_dev->device_id = PM8001_MAX_DEVICES;
+ pm8001_dev->sas_device = NULL;
+}
+
+/**
+ * pm8001_dev_found_notify - libsas notify a device is found.
+ * @dev: the device structure which sas layer used.
+ *
+ * when libsas find a sas domain device, it should tell the LLDD that
+ * device is found, and then LLDD register this device to HBA firmware
+ * by the command "OPC_INB_REG_DEV", after that the HBA will assign a
+ * device ID(according to device's sas address) and returned it to LLDD. From
+ * now on, we communicate with HBA FW with the device ID which HBA assigned
+ * rather than sas address. it is the necessary step for our HBA but it is
+ * the optional for other HBA driver.
+ */
+static int pm8001_dev_found_notify(struct domain_device *dev)
+{
+ unsigned long flags = 0;
+ int res = 0;
+ struct pm8001_hba_info *pm8001_ha = NULL;
+ struct domain_device *parent_dev = dev->parent;
+ struct pm8001_device *pm8001_device;
+ DECLARE_COMPLETION_ONSTACK(completion);
+ u32 flag = 0;
+ pm8001_ha = pm8001_find_ha_by_dev(dev);
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+
+ pm8001_device = pm8001_alloc_dev(pm8001_ha);
+ if (!pm8001_device) {
+ res = -1;
+ goto found_out;
+ }
+ pm8001_device->sas_device = dev;
+ dev->lldd_dev = pm8001_device;
+ pm8001_device->dev_type = dev->dev_type;
+ pm8001_device->dcompletion = &completion;
+ if (parent_dev && dev_is_expander(parent_dev->dev_type)) {
+ int phy_id;
+
+ phy_id = sas_find_attached_phy_id(&parent_dev->ex_dev, dev);
+ if (phy_id < 0) {
+ pm8001_dbg(pm8001_ha, FAIL,
+ "Error: no attached dev:%016llx at ex:%016llx.\n",
+ SAS_ADDR(dev->sas_addr),
+ SAS_ADDR(parent_dev->sas_addr));
+ res = phy_id;
+ } else {
+ pm8001_device->attached_phy = phy_id;
+ }
+ } else {
+ if (dev->dev_type == SAS_SATA_DEV) {
+ pm8001_device->attached_phy =
+ dev->rphy->identify.phy_identifier;
+ flag = 1; /* directly sata */
+ }
+ } /*register this device to HBA*/
+ pm8001_dbg(pm8001_ha, DISC, "Found device\n");
+ PM8001_CHIP_DISP->reg_dev_req(pm8001_ha, pm8001_device, flag);
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ wait_for_completion(&completion);
+ if (dev->dev_type == SAS_END_DEVICE)
+ msleep(50);
+ pm8001_ha->flags = PM8001F_RUN_TIME;
+ return 0;
+found_out:
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ return res;
+}
+
+int pm8001_dev_found(struct domain_device *dev)
+{
+ return pm8001_dev_found_notify(dev);
+}
+
+#define PM8001_TASK_TIMEOUT 20
+
+/**
+ * pm8001_dev_gone_notify - see the comments for "pm8001_dev_found_notify"
+ * @dev: the device structure which sas layer used.
+ */
+static void pm8001_dev_gone_notify(struct domain_device *dev)
+{
+ unsigned long flags = 0;
+ struct pm8001_hba_info *pm8001_ha;
+ struct pm8001_device *pm8001_dev = dev->lldd_dev;
+
+ pm8001_ha = pm8001_find_ha_by_dev(dev);
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+ if (pm8001_dev) {
+ u32 device_id = pm8001_dev->device_id;
+
+ pm8001_dbg(pm8001_ha, DISC, "found dev[%d:%x] is gone.\n",
+ pm8001_dev->device_id, pm8001_dev->dev_type);
+ if (atomic_read(&pm8001_dev->running_req)) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ sas_execute_internal_abort_dev(dev, 0, NULL);
+ while (atomic_read(&pm8001_dev->running_req))
+ msleep(20);
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+ }
+ PM8001_CHIP_DISP->dereg_dev_req(pm8001_ha, device_id);
+ pm8001_free_dev(pm8001_dev);
+ } else {
+ pm8001_dbg(pm8001_ha, DISC, "Found dev has gone.\n");
+ }
+ dev->lldd_dev = NULL;
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+}
+
+void pm8001_dev_gone(struct domain_device *dev)
+{
+ pm8001_dev_gone_notify(dev);
+}
+
+/* retry commands by ha, by task and/or by device */
+void pm8001_open_reject_retry(
+ struct pm8001_hba_info *pm8001_ha,
+ struct sas_task *task_to_close,
+ struct pm8001_device *device_to_close)
+{
+ int i;
+ unsigned long flags;
+
+ if (pm8001_ha == NULL)
+ return;
+
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+
+ for (i = 0; i < PM8001_MAX_CCB; i++) {
+ struct sas_task *task;
+ struct task_status_struct *ts;
+ struct pm8001_device *pm8001_dev;
+ unsigned long flags1;
+ struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[i];
+
+ if (ccb->ccb_tag == PM8001_INVALID_TAG)
+ continue;
+
+ pm8001_dev = ccb->device;
+ if (!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED))
+ continue;
+ if (!device_to_close) {
+ uintptr_t d = (uintptr_t)pm8001_dev
+ - (uintptr_t)&pm8001_ha->devices;
+ if (((d % sizeof(*pm8001_dev)) != 0)
+ || ((d / sizeof(*pm8001_dev)) >= PM8001_MAX_DEVICES))
+ continue;
+ } else if (pm8001_dev != device_to_close)
+ continue;
+ task = ccb->task;
+ if (!task || !task->task_done)
+ continue;
+ if (task_to_close && (task != task_to_close))
+ continue;
+ ts = &task->task_status;
+ ts->resp = SAS_TASK_COMPLETE;
+ /* Force the midlayer to retry */
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ spin_lock_irqsave(&task->task_state_lock, flags1);
+ task->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ task->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (unlikely((task->task_state_flags
+ & SAS_TASK_STATE_ABORTED))) {
+ spin_unlock_irqrestore(&task->task_state_lock,
+ flags1);
+ pm8001_ccb_task_free(pm8001_ha, ccb);
+ } else {
+ spin_unlock_irqrestore(&task->task_state_lock,
+ flags1);
+ pm8001_ccb_task_free(pm8001_ha, ccb);
+ mb();/* in order to force CPU ordering */
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ task->task_done(task);
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+ }
+ }
+
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+}
+
+/**
+ * pm8001_I_T_nexus_reset() - reset the initiator/target connection
+ * @dev: the device structure for the device to reset.
+ *
+ * Standard mandates link reset for ATA (type 0) and hard reset for
+ * SSP (type 1), only for RECOVERY
+ */
+int pm8001_I_T_nexus_reset(struct domain_device *dev)
+{
+ int rc = TMF_RESP_FUNC_FAILED;
+ struct pm8001_device *pm8001_dev;
+ struct pm8001_hba_info *pm8001_ha;
+ struct sas_phy *phy;
+
+ if (!dev || !dev->lldd_dev)
+ return -ENODEV;
+
+ pm8001_dev = dev->lldd_dev;
+ pm8001_ha = pm8001_find_ha_by_dev(dev);
+ phy = sas_get_local_phy(dev);
+
+ if (dev_is_sata(dev)) {
+ if (scsi_is_sas_phy_local(phy)) {
+ rc = 0;
+ goto out;
+ }
+ rc = sas_phy_reset(phy, 1);
+ if (rc) {
+ pm8001_dbg(pm8001_ha, EH,
+ "phy reset failed for device %x\n"
+ "with rc %d\n", pm8001_dev->device_id, rc);
+ rc = TMF_RESP_FUNC_FAILED;
+ goto out;
+ }
+ msleep(2000);
+ rc = sas_execute_internal_abort_dev(dev, 0, NULL);
+ if (rc) {
+ pm8001_dbg(pm8001_ha, EH, "task abort failed %x\n"
+ "with rc %d\n", pm8001_dev->device_id, rc);
+ rc = TMF_RESP_FUNC_FAILED;
+ }
+ } else {
+ rc = sas_phy_reset(phy, 1);
+ msleep(2000);
+ }
+ pm8001_dbg(pm8001_ha, EH, " for device[%x]:rc=%d\n",
+ pm8001_dev->device_id, rc);
+ out:
+ sas_put_local_phy(phy);
+ return rc;
+}
+
+/*
+* This function handle the IT_NEXUS_XXX event or completion
+* status code for SSP/SATA/SMP I/O request.
+*/
+int pm8001_I_T_nexus_event_handler(struct domain_device *dev)
+{
+ int rc = TMF_RESP_FUNC_FAILED;
+ struct pm8001_device *pm8001_dev;
+ struct pm8001_hba_info *pm8001_ha;
+ struct sas_phy *phy;
+
+ if (!dev || !dev->lldd_dev)
+ return -1;
+
+ pm8001_dev = dev->lldd_dev;
+ pm8001_ha = pm8001_find_ha_by_dev(dev);
+
+ pm8001_dbg(pm8001_ha, EH, "I_T_Nexus handler invoked !!\n");
+
+ phy = sas_get_local_phy(dev);
+
+ if (dev_is_sata(dev)) {
+ DECLARE_COMPLETION_ONSTACK(completion_setstate);
+ if (scsi_is_sas_phy_local(phy)) {
+ rc = 0;
+ goto out;
+ }
+ /* send internal ssp/sata/smp abort command to FW */
+ sas_execute_internal_abort_dev(dev, 0, NULL);
+ msleep(100);
+
+ /* deregister the target device */
+ pm8001_dev_gone_notify(dev);
+ msleep(200);
+
+ /*send phy reset to hard reset target */
+ rc = sas_phy_reset(phy, 1);
+ msleep(2000);
+ pm8001_dev->setds_completion = &completion_setstate;
+
+ wait_for_completion(&completion_setstate);
+ } else {
+ /* send internal ssp/sata/smp abort command to FW */
+ sas_execute_internal_abort_dev(dev, 0, NULL);
+ msleep(100);
+
+ /* deregister the target device */
+ pm8001_dev_gone_notify(dev);
+ msleep(200);
+
+ /*send phy reset to hard reset target */
+ rc = sas_phy_reset(phy, 1);
+ msleep(2000);
+ }
+ pm8001_dbg(pm8001_ha, EH, " for device[%x]:rc=%d\n",
+ pm8001_dev->device_id, rc);
+out:
+ sas_put_local_phy(phy);
+
+ return rc;
+}
+/* mandatory SAM-3, the task reset the specified LUN*/
+int pm8001_lu_reset(struct domain_device *dev, u8 *lun)
+{
+ int rc = TMF_RESP_FUNC_FAILED;
+ struct pm8001_device *pm8001_dev = dev->lldd_dev;
+ struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
+ DECLARE_COMPLETION_ONSTACK(completion_setstate);
+
+ if (PM8001_CHIP_DISP->fatal_errors(pm8001_ha)) {
+ /*
+ * If the controller is in fatal error state,
+ * we will not get a response from the controller
+ */
+ pm8001_dbg(pm8001_ha, FAIL,
+ "LUN reset failed due to fatal errors\n");
+ return rc;
+ }
+
+ if (dev_is_sata(dev)) {
+ struct sas_phy *phy = sas_get_local_phy(dev);
+ sas_execute_internal_abort_dev(dev, 0, NULL);
+ rc = sas_phy_reset(phy, 1);
+ sas_put_local_phy(phy);
+ pm8001_dev->setds_completion = &completion_setstate;
+ rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
+ pm8001_dev, DS_OPERATIONAL);
+ wait_for_completion(&completion_setstate);
+ } else {
+ rc = sas_lu_reset(dev, lun);
+ }
+ /* If failed, fall-through I_T_Nexus reset */
+ pm8001_dbg(pm8001_ha, EH, "for device[%x]:rc=%d\n",
+ pm8001_dev->device_id, rc);
+ return rc;
+}
+
+/* optional SAM-3 */
+int pm8001_query_task(struct sas_task *task)
+{
+ u32 tag = 0xdeadbeef;
+ int rc = TMF_RESP_FUNC_FAILED;
+ if (unlikely(!task || !task->lldd_task || !task->dev))
+ return rc;
+
+ if (task->task_proto & SAS_PROTOCOL_SSP) {
+ struct scsi_cmnd *cmnd = task->uldd_task;
+ struct domain_device *dev = task->dev;
+ struct pm8001_hba_info *pm8001_ha =
+ pm8001_find_ha_by_dev(dev);
+
+ rc = pm8001_find_tag(task, &tag);
+ if (rc == 0) {
+ rc = TMF_RESP_FUNC_FAILED;
+ return rc;
+ }
+ pm8001_dbg(pm8001_ha, EH, "Query:[%16ph]\n", cmnd->cmnd);
+
+ rc = sas_query_task(task, tag);
+ switch (rc) {
+ /* The task is still in Lun, release it then */
+ case TMF_RESP_FUNC_SUCC:
+ pm8001_dbg(pm8001_ha, EH,
+ "The task is still in Lun\n");
+ break;
+ /* The task is not in Lun or failed, reset the phy */
+ case TMF_RESP_FUNC_FAILED:
+ case TMF_RESP_FUNC_COMPLETE:
+ pm8001_dbg(pm8001_ha, EH,
+ "The task is not in Lun or failed, reset the phy\n");
+ break;
+ }
+ }
+ pr_err("pm80xx: rc= %d\n", rc);
+ return rc;
+}
+
+/* mandatory SAM-3, still need free task/ccb info, abort the specified task */
+int pm8001_abort_task(struct sas_task *task)
+{
+ struct pm8001_ccb_info *ccb = task->lldd_task;
+ unsigned long flags;
+ u32 tag;
+ struct domain_device *dev ;
+ struct pm8001_hba_info *pm8001_ha;
+ struct pm8001_device *pm8001_dev;
+ int rc = TMF_RESP_FUNC_FAILED, ret;
+ u32 phy_id, port_id;
+ struct sas_task_slow slow_task;
+
+ if (!task->lldd_task || !task->dev)
+ return TMF_RESP_FUNC_FAILED;
+
+ dev = task->dev;
+ pm8001_dev = dev->lldd_dev;
+ pm8001_ha = pm8001_find_ha_by_dev(dev);
+ phy_id = pm8001_dev->attached_phy;
+
+ if (PM8001_CHIP_DISP->fatal_errors(pm8001_ha)) {
+ // If the controller is seeing fatal errors
+ // abort task will not get a response from the controller
+ return TMF_RESP_FUNC_FAILED;
+ }
+
+ ret = pm8001_find_tag(task, &tag);
+ if (ret == 0) {
+ pm8001_info(pm8001_ha, "no tag for task:%p\n", task);
+ return TMF_RESP_FUNC_FAILED;
+ }
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (task->task_state_flags & SAS_TASK_STATE_DONE) {
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ return TMF_RESP_FUNC_COMPLETE;
+ }
+ task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+ if (task->slow_task == NULL) {
+ init_completion(&slow_task.completion);
+ task->slow_task = &slow_task;
+ }
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ if (task->task_proto & SAS_PROTOCOL_SSP) {
+ rc = sas_abort_task(task, tag);
+ sas_execute_internal_abort_single(dev, tag, 0, NULL);
+ } else if (task->task_proto & SAS_PROTOCOL_SATA ||
+ task->task_proto & SAS_PROTOCOL_STP) {
+ if (pm8001_ha->chip_id == chip_8006) {
+ DECLARE_COMPLETION_ONSTACK(completion_reset);
+ DECLARE_COMPLETION_ONSTACK(completion);
+ struct pm8001_phy *phy = pm8001_ha->phy + phy_id;
+ port_id = phy->port->port_id;
+
+ /* 1. Set Device state as Recovery */
+ pm8001_dev->setds_completion = &completion;
+ PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
+ pm8001_dev, DS_IN_RECOVERY);
+ wait_for_completion(&completion);
+
+ /* 2. Send Phy Control Hard Reset */
+ reinit_completion(&completion);
+ phy->port_reset_status = PORT_RESET_TMO;
+ phy->reset_success = false;
+ phy->enable_completion = &completion;
+ phy->reset_completion = &completion_reset;
+ ret = PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
+ PHY_HARD_RESET);
+ if (ret) {
+ phy->enable_completion = NULL;
+ phy->reset_completion = NULL;
+ goto out;
+ }
+
+ /* In the case of the reset timeout/fail we still
+ * abort the command at the firmware. The assumption
+ * here is that the drive is off doing something so
+ * that it's not processing requests, and we want to
+ * avoid getting a completion for this and either
+ * leaking the task in libsas or losing the race and
+ * getting a double free.
+ */
+ pm8001_dbg(pm8001_ha, MSG,
+ "Waiting for local phy ctl\n");
+ ret = wait_for_completion_timeout(&completion,
+ PM8001_TASK_TIMEOUT * HZ);
+ if (!ret || !phy->reset_success) {
+ phy->enable_completion = NULL;
+ phy->reset_completion = NULL;
+ } else {
+ /* 3. Wait for Port Reset complete or
+ * Port reset TMO
+ */
+ pm8001_dbg(pm8001_ha, MSG,
+ "Waiting for Port reset\n");
+ ret = wait_for_completion_timeout(
+ &completion_reset,
+ PM8001_TASK_TIMEOUT * HZ);
+ if (!ret)
+ phy->reset_completion = NULL;
+ WARN_ON(phy->port_reset_status ==
+ PORT_RESET_TMO);
+ if (phy->port_reset_status == PORT_RESET_TMO) {
+ pm8001_dev_gone_notify(dev);
+ PM8001_CHIP_DISP->hw_event_ack_req(
+ pm8001_ha, 0,
+ 0x07, /*HW_EVENT_PHY_DOWN ack*/
+ port_id, phy_id, 0, 0);
+ goto out;
+ }
+ }
+
+ /*
+ * 4. SATA Abort ALL
+ * we wait for the task to be aborted so that the task
+ * is removed from the ccb. on success the caller is
+ * going to free the task.
+ */
+ ret = sas_execute_internal_abort_dev(dev, 0, NULL);
+ if (ret)
+ goto out;
+ ret = wait_for_completion_timeout(
+ &task->slow_task->completion,
+ PM8001_TASK_TIMEOUT * HZ);
+ if (!ret)
+ goto out;
+
+ /* 5. Set Device State as Operational */
+ reinit_completion(&completion);
+ pm8001_dev->setds_completion = &completion;
+ PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
+ pm8001_dev, DS_OPERATIONAL);
+ wait_for_completion(&completion);
+ } else {
+ /*
+ * Ensure that if we see a completion for the ccb
+ * associated with the task which we are trying to
+ * abort then we should not touch the sas_task as it
+ * may race with libsas freeing it when return here.
+ */
+ ccb->task = NULL;
+ ret = sas_execute_internal_abort_single(dev, tag, 0, NULL);
+ }
+ rc = TMF_RESP_FUNC_COMPLETE;
+ } else if (task->task_proto & SAS_PROTOCOL_SMP) {
+ /* SMP */
+ rc = sas_execute_internal_abort_single(dev, tag, 0, NULL);
+
+ }
+out:
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (task->slow_task == &slow_task)
+ task->slow_task = NULL;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ if (rc != TMF_RESP_FUNC_COMPLETE)
+ pm8001_info(pm8001_ha, "rc= %d\n", rc);
+ return rc;
+}
+
+int pm8001_clear_task_set(struct domain_device *dev, u8 *lun)
+{
+ struct pm8001_device *pm8001_dev = dev->lldd_dev;
+ struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
+
+ pm8001_dbg(pm8001_ha, EH, "I_T_L_Q clear task set[%x]\n",
+ pm8001_dev->device_id);
+ return sas_clear_task_set(dev, lun);
+}
+
+void pm8001_port_formed(struct asd_sas_phy *sas_phy)
+{
+ struct sas_ha_struct *sas_ha = sas_phy->ha;
+ struct pm8001_hba_info *pm8001_ha = sas_ha->lldd_ha;
+ struct pm8001_phy *phy = sas_phy->lldd_phy;
+ struct asd_sas_port *sas_port = sas_phy->port;
+ struct pm8001_port *port = phy->port;
+
+ if (!sas_port) {
+ pm8001_dbg(pm8001_ha, FAIL, "Received null port\n");
+ return;
+ }
+ sas_port->lldd_port = port;
+}
+
+void pm8001_setds_completion(struct domain_device *dev)
+{
+ struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
+ struct pm8001_device *pm8001_dev = dev->lldd_dev;
+ DECLARE_COMPLETION_ONSTACK(completion_setstate);
+
+ if (pm8001_ha->chip_id != chip_8001) {
+ pm8001_dev->setds_completion = &completion_setstate;
+ PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
+ pm8001_dev, DS_OPERATIONAL);
+ wait_for_completion(&completion_setstate);
+ }
+}
+
+void pm8001_tmf_aborted(struct sas_task *task)
+{
+ struct pm8001_ccb_info *ccb = task->lldd_task;
+
+ if (ccb)
+ ccb->task = NULL;
+}
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
new file mode 100644
index 0000000000..2fadd353f1
--- /dev/null
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -0,0 +1,794 @@
+/*
+ * PMC-Sierra PM8001/8081/8088/8089 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#ifndef _PM8001_SAS_H_
+#define _PM8001_SAS_H_
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/ctype.h>
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <scsi/libsas.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/sas_ata.h>
+#include <linux/atomic.h>
+#include <linux/blk-mq.h>
+#include <linux/blk-mq-pci.h>
+#include "pm8001_defs.h"
+
+#define DRV_NAME "pm80xx"
+#define DRV_VERSION "0.1.40"
+#define PM8001_FAIL_LOGGING 0x01 /* Error message logging */
+#define PM8001_INIT_LOGGING 0x02 /* driver init logging */
+#define PM8001_DISC_LOGGING 0x04 /* discovery layer logging */
+#define PM8001_IO_LOGGING 0x08 /* I/O path logging */
+#define PM8001_EH_LOGGING 0x10 /* libsas EH function logging*/
+#define PM8001_IOCTL_LOGGING 0x20 /* IOCTL message logging */
+#define PM8001_MSG_LOGGING 0x40 /* misc message logging */
+#define PM8001_DEV_LOGGING 0x80 /* development message logging */
+#define PM8001_DEVIO_LOGGING 0x100 /* development io message logging */
+#define PM8001_IOERR_LOGGING 0x200 /* development io err message logging */
+#define PM8001_EVENT_LOGGING 0x400 /* HW event logging */
+
+#define pm8001_info(HBA, fmt, ...) \
+ pr_info("%s:: %s %d: " fmt, \
+ (HBA)->name, __func__, __LINE__, ##__VA_ARGS__)
+
+#define pm8001_dbg(HBA, level, fmt, ...) \
+do { \
+ if (unlikely((HBA)->logging_level & PM8001_##level##_LOGGING)) \
+ pm8001_info(HBA, fmt, ##__VA_ARGS__); \
+} while (0)
+
+#define PM8001_USE_TASKLET
+#define PM8001_USE_MSIX
+#define PM8001_READ_VPD
+
+
+#define IS_SPCV_12G(dev) ((dev->device == 0X8074) \
+ || (dev->device == 0X8076) \
+ || (dev->device == 0X8077) \
+ || (dev->device == 0X8070) \
+ || (dev->device == 0X8072))
+
+#define PM8001_NAME_LENGTH 32/* generic length of strings */
+extern struct list_head hba_list;
+extern const struct pm8001_dispatch pm8001_8001_dispatch;
+extern const struct pm8001_dispatch pm8001_80xx_dispatch;
+
+struct pm8001_hba_info;
+struct pm8001_ccb_info;
+struct pm8001_device;
+
+struct pm8001_ioctl_payload {
+ u32 signature;
+ u16 major_function;
+ u16 minor_function;
+ u16 status;
+ u16 offset;
+ u16 id;
+ u32 wr_length;
+ u32 rd_length;
+ u8 *func_specific;
+};
+
+#define MPI_FATAL_ERROR_TABLE_OFFSET_MASK 0xFFFFFF
+#define MPI_FATAL_ERROR_TABLE_SIZE(value) ((0xFF000000 & value) >> SHIFT24)
+#define MPI_FATAL_EDUMP_TABLE_LO_OFFSET 0x00 /* HNFBUFL */
+#define MPI_FATAL_EDUMP_TABLE_HI_OFFSET 0x04 /* HNFBUFH */
+#define MPI_FATAL_EDUMP_TABLE_LENGTH 0x08 /* HNFBLEN */
+#define MPI_FATAL_EDUMP_TABLE_HANDSHAKE 0x0C /* FDDHSHK */
+#define MPI_FATAL_EDUMP_TABLE_STATUS 0x10 /* FDDTSTAT */
+#define MPI_FATAL_EDUMP_TABLE_ACCUM_LEN 0x14 /* ACCDDLEN */
+#define MPI_FATAL_EDUMP_TABLE_TOTAL_LEN 0x18 /* TOTALLEN */
+#define MPI_FATAL_EDUMP_TABLE_SIGNATURE 0x1C /* SIGNITURE */
+#define MPI_FATAL_EDUMP_HANDSHAKE_RDY 0x1
+#define MPI_FATAL_EDUMP_HANDSHAKE_BUSY 0x0
+#define MPI_FATAL_EDUMP_TABLE_STAT_RSVD 0x0
+#define MPI_FATAL_EDUMP_TABLE_STAT_DMA_FAILED 0x1
+#define MPI_FATAL_EDUMP_TABLE_STAT_NF_SUCCESS_MORE_DATA 0x2
+#define MPI_FATAL_EDUMP_TABLE_STAT_NF_SUCCESS_DONE 0x3
+#define TYPE_GSM_SPACE 1
+#define TYPE_QUEUE 2
+#define TYPE_FATAL 3
+#define TYPE_NON_FATAL 4
+#define TYPE_INBOUND 1
+#define TYPE_OUTBOUND 2
+struct forensic_data {
+ u32 data_type;
+ union {
+ struct {
+ u32 direct_len;
+ u32 direct_offset;
+ void *direct_data;
+ } gsm_buf;
+ struct {
+ u16 queue_type;
+ u16 queue_index;
+ u32 direct_len;
+ void *direct_data;
+ } queue_buf;
+ struct {
+ u32 direct_len;
+ u32 direct_offset;
+ u32 read_len;
+ void *direct_data;
+ } data_buf;
+ };
+};
+
+/* bit31-26 - mask bar */
+#define SCRATCH_PAD0_BAR_MASK 0xFC000000
+/* bit25-0 - offset mask */
+#define SCRATCH_PAD0_OFFSET_MASK 0x03FFFFFF
+/* if AAP error state */
+#define SCRATCH_PAD0_AAPERR_MASK 0xFFFFFFFF
+/* Inbound doorbell bit7 */
+#define SPCv_MSGU_CFG_TABLE_NONFATAL_DUMP 0x80
+/* Inbound doorbell bit7 SPCV */
+#define SPCV_MSGU_CFG_TABLE_TRANSFER_DEBUG_INFO 0x80
+#define MAIN_MERRDCTO_MERRDCES 0xA0/* DWORD 0x28) */
+
+struct pm8001_dispatch {
+ char *name;
+ int (*chip_init)(struct pm8001_hba_info *pm8001_ha);
+ void (*chip_post_init)(struct pm8001_hba_info *pm8001_ha);
+ int (*chip_soft_rst)(struct pm8001_hba_info *pm8001_ha);
+ void (*chip_rst)(struct pm8001_hba_info *pm8001_ha);
+ int (*chip_ioremap)(struct pm8001_hba_info *pm8001_ha);
+ void (*chip_iounmap)(struct pm8001_hba_info *pm8001_ha);
+ irqreturn_t (*isr)(struct pm8001_hba_info *pm8001_ha, u8 vec);
+ u32 (*is_our_interrupt)(struct pm8001_hba_info *pm8001_ha);
+ int (*isr_process_oq)(struct pm8001_hba_info *pm8001_ha, u8 vec);
+ void (*interrupt_enable)(struct pm8001_hba_info *pm8001_ha, u8 vec);
+ void (*interrupt_disable)(struct pm8001_hba_info *pm8001_ha, u8 vec);
+ void (*make_prd)(struct scatterlist *scatter, int nr, void *prd);
+ int (*smp_req)(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb);
+ int (*ssp_io_req)(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb);
+ int (*sata_req)(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb);
+ int (*phy_start_req)(struct pm8001_hba_info *pm8001_ha, u8 phy_id);
+ int (*phy_stop_req)(struct pm8001_hba_info *pm8001_ha, u8 phy_id);
+ int (*reg_dev_req)(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_device *pm8001_dev, u32 flag);
+ int (*dereg_dev_req)(struct pm8001_hba_info *pm8001_ha, u32 device_id);
+ int (*phy_ctl_req)(struct pm8001_hba_info *pm8001_ha,
+ u32 phy_id, u32 phy_op);
+ int (*task_abort)(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb);
+ int (*ssp_tm_req)(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb, struct sas_tmf_task *tmf);
+ int (*get_nvmd_req)(struct pm8001_hba_info *pm8001_ha, void *payload);
+ int (*set_nvmd_req)(struct pm8001_hba_info *pm8001_ha, void *payload);
+ int (*fw_flash_update_req)(struct pm8001_hba_info *pm8001_ha,
+ void *payload);
+ int (*set_dev_state_req)(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_device *pm8001_dev, u32 state);
+ int (*sas_diag_start_end_req)(struct pm8001_hba_info *pm8001_ha,
+ u32 state);
+ int (*sas_diag_execute_req)(struct pm8001_hba_info *pm8001_ha,
+ u32 state);
+ int (*sas_re_init_req)(struct pm8001_hba_info *pm8001_ha);
+ int (*fatal_errors)(struct pm8001_hba_info *pm8001_ha);
+ void (*hw_event_ack_req)(struct pm8001_hba_info *pm8001_ha,
+ u32 Qnum, u32 SEA, u32 port_id, u32 phyId, u32 param0,
+ u32 param1);
+};
+
+struct pm8001_chip_info {
+ u32 encrypt;
+ u32 n_phy;
+ const struct pm8001_dispatch *dispatch;
+};
+#define PM8001_CHIP_DISP (pm8001_ha->chip->dispatch)
+
+struct pm8001_port {
+ struct asd_sas_port sas_port;
+ u8 port_attached;
+ u16 wide_port_phymap;
+ u8 port_state;
+ u8 port_id;
+ struct list_head list;
+};
+
+struct pm8001_phy {
+ struct pm8001_hba_info *pm8001_ha;
+ struct pm8001_port *port;
+ struct asd_sas_phy sas_phy;
+ struct sas_identify identify;
+ struct scsi_device *sdev;
+ u64 dev_sas_addr;
+ u32 phy_type;
+ struct completion *enable_completion;
+ u32 frame_rcvd_size;
+ u8 frame_rcvd[32];
+ u8 phy_attached;
+ u8 phy_state;
+ enum sas_linkrate minimum_linkrate;
+ enum sas_linkrate maximum_linkrate;
+ struct completion *reset_completion;
+ bool port_reset_status;
+ bool reset_success;
+};
+
+/* port reset status */
+#define PORT_RESET_SUCCESS 0x00
+#define PORT_RESET_TMO 0x01
+
+struct pm8001_device {
+ enum sas_device_type dev_type;
+ struct domain_device *sas_device;
+ u32 attached_phy;
+ u32 id;
+ struct completion *dcompletion;
+ struct completion *setds_completion;
+ u32 device_id;
+ atomic_t running_req;
+};
+
+struct pm8001_prd_imt {
+ __le32 len;
+ __le32 e;
+};
+
+struct pm8001_prd {
+ __le64 addr; /* 64-bit buffer address */
+ struct pm8001_prd_imt im_len; /* 64-bit length */
+} __attribute__ ((packed));
+/*
+ * CCB(Command Control Block)
+ */
+struct pm8001_ccb_info {
+ struct sas_task *task;
+ u32 n_elem;
+ u32 ccb_tag;
+ dma_addr_t ccb_dma_handle;
+ struct pm8001_device *device;
+ struct pm8001_prd *buf_prd;
+ struct fw_control_ex *fw_control_context;
+ u8 open_retry;
+};
+
+struct mpi_mem {
+ void *virt_ptr;
+ dma_addr_t phys_addr;
+ u32 phys_addr_hi;
+ u32 phys_addr_lo;
+ u32 total_len;
+ u32 num_elements;
+ u32 element_size;
+ u32 alignment;
+};
+
+struct mpi_mem_req {
+ /* The number of element in the mpiMemory array */
+ u32 count;
+ /* The array of structures that define memroy regions*/
+ struct mpi_mem region[USI_MAX_MEMCNT];
+};
+
+struct encrypt {
+ u32 cipher_mode;
+ u32 sec_mode;
+ u32 status;
+ u32 flag;
+};
+
+struct sas_phy_attribute_table {
+ u32 phystart1_16[16];
+ u32 outbound_hw_event_pid1_16[16];
+};
+
+union main_cfg_table {
+ struct {
+ u32 signature;
+ u32 interface_rev;
+ u32 firmware_rev;
+ u32 max_out_io;
+ u32 max_sgl;
+ u32 ctrl_cap_flag;
+ u32 gst_offset;
+ u32 inbound_queue_offset;
+ u32 outbound_queue_offset;
+ u32 inbound_q_nppd_hppd;
+ u32 outbound_hw_event_pid0_3;
+ u32 outbound_hw_event_pid4_7;
+ u32 outbound_ncq_event_pid0_3;
+ u32 outbound_ncq_event_pid4_7;
+ u32 outbound_tgt_ITNexus_event_pid0_3;
+ u32 outbound_tgt_ITNexus_event_pid4_7;
+ u32 outbound_tgt_ssp_event_pid0_3;
+ u32 outbound_tgt_ssp_event_pid4_7;
+ u32 outbound_tgt_smp_event_pid0_3;
+ u32 outbound_tgt_smp_event_pid4_7;
+ u32 upper_event_log_addr;
+ u32 lower_event_log_addr;
+ u32 event_log_size;
+ u32 event_log_option;
+ u32 upper_iop_event_log_addr;
+ u32 lower_iop_event_log_addr;
+ u32 iop_event_log_size;
+ u32 iop_event_log_option;
+ u32 fatal_err_interrupt;
+ u32 fatal_err_dump_offset0;
+ u32 fatal_err_dump_length0;
+ u32 fatal_err_dump_offset1;
+ u32 fatal_err_dump_length1;
+ u32 hda_mode_flag;
+ u32 anolog_setup_table_offset;
+ u32 rsvd[4];
+ } pm8001_tbl;
+
+ struct {
+ u32 signature;
+ u32 interface_rev;
+ u32 firmware_rev;
+ u32 max_out_io;
+ u32 max_sgl;
+ u32 ctrl_cap_flag;
+ u32 gst_offset;
+ u32 inbound_queue_offset;
+ u32 outbound_queue_offset;
+ u32 inbound_q_nppd_hppd;
+ u32 rsvd[8];
+ u32 crc_core_dump;
+ u32 rsvd1;
+ u32 upper_event_log_addr;
+ u32 lower_event_log_addr;
+ u32 event_log_size;
+ u32 event_log_severity;
+ u32 upper_pcs_event_log_addr;
+ u32 lower_pcs_event_log_addr;
+ u32 pcs_event_log_size;
+ u32 pcs_event_log_severity;
+ u32 fatal_err_interrupt;
+ u32 fatal_err_dump_offset0;
+ u32 fatal_err_dump_length0;
+ u32 fatal_err_dump_offset1;
+ u32 fatal_err_dump_length1;
+ u32 gpio_led_mapping;
+ u32 analog_setup_table_offset;
+ u32 int_vec_table_offset;
+ u32 phy_attr_table_offset;
+ u32 port_recovery_timer;
+ u32 interrupt_reassertion_delay;
+ u32 fatal_n_non_fatal_dump; /* 0x28 */
+ u32 ila_version;
+ u32 inc_fw_version;
+ } pm80xx_tbl;
+};
+
+union general_status_table {
+ struct {
+ u32 gst_len_mpistate;
+ u32 iq_freeze_state0;
+ u32 iq_freeze_state1;
+ u32 msgu_tcnt;
+ u32 iop_tcnt;
+ u32 rsvd;
+ u32 phy_state[8];
+ u32 gpio_input_val;
+ u32 rsvd1[2];
+ u32 recover_err_info[8];
+ } pm8001_tbl;
+ struct {
+ u32 gst_len_mpistate;
+ u32 iq_freeze_state0;
+ u32 iq_freeze_state1;
+ u32 msgu_tcnt;
+ u32 iop_tcnt;
+ u32 rsvd[9];
+ u32 gpio_input_val;
+ u32 rsvd1[2];
+ u32 recover_err_info[8];
+ } pm80xx_tbl;
+};
+struct inbound_queue_table {
+ u32 element_pri_size_cnt;
+ u32 upper_base_addr;
+ u32 lower_base_addr;
+ u32 ci_upper_base_addr;
+ u32 ci_lower_base_addr;
+ u32 pi_pci_bar;
+ u32 pi_offset;
+ u32 total_length;
+ void *base_virt;
+ void *ci_virt;
+ u32 reserved;
+ __le32 consumer_index;
+ u32 producer_idx;
+ spinlock_t iq_lock;
+};
+struct outbound_queue_table {
+ u32 element_size_cnt;
+ u32 upper_base_addr;
+ u32 lower_base_addr;
+ void *base_virt;
+ u32 pi_upper_base_addr;
+ u32 pi_lower_base_addr;
+ u32 ci_pci_bar;
+ u32 ci_offset;
+ u32 total_length;
+ void *pi_virt;
+ u32 interrup_vec_cnt_delay;
+ u32 dinterrup_to_pci_offset;
+ __le32 producer_index;
+ u32 consumer_idx;
+ spinlock_t oq_lock;
+ unsigned long lock_flags;
+};
+struct pm8001_hba_memspace {
+ void __iomem *memvirtaddr;
+ u64 membase;
+ u32 memsize;
+};
+struct isr_param {
+ struct pm8001_hba_info *drv_inst;
+ u32 irq_id;
+};
+struct pm8001_hba_info {
+ char name[PM8001_NAME_LENGTH];
+ struct list_head list;
+ unsigned long flags;
+ spinlock_t lock;/* host-wide lock */
+ spinlock_t bitmap_lock;
+ struct pci_dev *pdev;/* our device */
+ struct device *dev;
+ struct pm8001_hba_memspace io_mem[6];
+ struct mpi_mem_req memoryMap;
+ struct encrypt encrypt_info; /* support encryption */
+ struct forensic_data forensic_info;
+ u32 fatal_bar_loc;
+ u32 forensic_last_offset;
+ u32 fatal_forensic_shift_offset;
+ u32 forensic_fatal_step;
+ u32 forensic_preserved_accumulated_transfer;
+ u32 evtlog_ib_offset;
+ u32 evtlog_ob_offset;
+ void __iomem *msg_unit_tbl_addr;/*Message Unit Table Addr*/
+ void __iomem *main_cfg_tbl_addr;/*Main Config Table Addr*/
+ void __iomem *general_stat_tbl_addr;/*General Status Table Addr*/
+ void __iomem *inbnd_q_tbl_addr;/*Inbound Queue Config Table Addr*/
+ void __iomem *outbnd_q_tbl_addr;/*Outbound Queue Config Table Addr*/
+ void __iomem *pspa_q_tbl_addr;
+ /*MPI SAS PHY attributes Queue Config Table Addr*/
+ void __iomem *ivt_tbl_addr; /*MPI IVT Table Addr */
+ void __iomem *fatal_tbl_addr; /*MPI IVT Table Addr */
+ union main_cfg_table main_cfg_tbl;
+ union general_status_table gs_tbl;
+ struct inbound_queue_table inbnd_q_tbl[PM8001_MAX_INB_NUM];
+ struct outbound_queue_table outbnd_q_tbl[PM8001_MAX_OUTB_NUM];
+ struct sas_phy_attribute_table phy_attr_table;
+ /* MPI SAS PHY attributes */
+ u8 sas_addr[SAS_ADDR_SIZE];
+ struct sas_ha_struct *sas;/* SCSI/SAS glue */
+ struct Scsi_Host *shost;
+ u32 chip_id;
+ const struct pm8001_chip_info *chip;
+ struct completion *nvmd_completion;
+ unsigned long *rsvd_tags;
+ struct pm8001_phy phy[PM8001_MAX_PHYS];
+ struct pm8001_port port[PM8001_MAX_PHYS];
+ u32 id;
+ u32 irq;
+ u32 iomb_size; /* SPC and SPCV IOMB size */
+ struct pm8001_device *devices;
+ struct pm8001_ccb_info *ccb_info;
+ u32 ccb_count;
+#ifdef PM8001_USE_MSIX
+ int number_of_intr;/*will be used in remove()*/
+ char intr_drvname[PM8001_MAX_MSIX_VEC]
+ [PM8001_NAME_LENGTH+1+3+1];
+#endif
+#ifdef PM8001_USE_TASKLET
+ struct tasklet_struct tasklet[PM8001_MAX_MSIX_VEC];
+#endif
+ u32 logging_level;
+ u32 link_rate;
+ u32 fw_status;
+ u32 smp_exp_mode;
+ bool controller_fatal_error;
+ const struct firmware *fw_image;
+ struct isr_param irq_vector[PM8001_MAX_MSIX_VEC];
+ u32 non_fatal_count;
+ u32 non_fatal_read_length;
+ u32 max_q_num;
+ u32 ib_offset;
+ u32 ob_offset;
+ u32 ci_offset;
+ u32 pi_offset;
+ u32 max_memcnt;
+};
+
+struct pm8001_work {
+ struct work_struct work;
+ struct pm8001_hba_info *pm8001_ha;
+ void *data;
+ int handler;
+};
+
+struct pm8001_fw_image_header {
+ u8 vender_id[8];
+ u8 product_id;
+ u8 hardware_rev;
+ u8 dest_partition;
+ u8 reserved;
+ u8 fw_rev[4];
+ __be32 image_length;
+ __be32 image_crc;
+ __be32 startup_entry;
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * FW Flash Update status values
+ */
+#define FLASH_UPDATE_COMPLETE_PENDING_REBOOT 0x00
+#define FLASH_UPDATE_IN_PROGRESS 0x01
+#define FLASH_UPDATE_HDR_ERR 0x02
+#define FLASH_UPDATE_OFFSET_ERR 0x03
+#define FLASH_UPDATE_CRC_ERR 0x04
+#define FLASH_UPDATE_LENGTH_ERR 0x05
+#define FLASH_UPDATE_HW_ERR 0x06
+#define FLASH_UPDATE_DNLD_NOT_SUPPORTED 0x10
+#define FLASH_UPDATE_DISABLED 0x11
+
+/* Device states */
+#define DS_OPERATIONAL 0x01
+#define DS_PORT_IN_RESET 0x02
+#define DS_IN_RECOVERY 0x03
+#define DS_IN_ERROR 0x04
+#define DS_NON_OPERATIONAL 0x07
+
+/**
+ * brief param structure for firmware flash update.
+ */
+struct fw_flash_updata_info {
+ u32 cur_image_offset;
+ u32 cur_image_len;
+ u32 total_image_len;
+ struct pm8001_prd sgl;
+};
+
+struct fw_control_info {
+ u32 retcode;/*ret code (status)*/
+ u32 phase;/*ret code phase*/
+ u32 phaseCmplt;/*percent complete for the current
+ update phase */
+ u32 version;/*Hex encoded firmware version number*/
+ u32 offset;/*Used for downloading firmware */
+ u32 len; /*len of buffer*/
+ u32 size;/* Used in OS VPD and Trace get size
+ operations.*/
+ u32 reserved;/* padding required for 64 bit
+ alignment */
+ u8 buffer[];/* Start of buffer */
+};
+struct fw_control_ex {
+ struct fw_control_info *fw_control;
+ void *buffer;/* keep buffer pointer to be
+ freed when the response comes*/
+ void *virtAddr;/* keep virtual address of the data */
+ void *usrAddr;/* keep virtual address of the
+ user data */
+ dma_addr_t phys_addr;
+ u32 len; /* len of buffer */
+ void *payload; /* pointer to IOCTL Payload */
+ u8 inProgress;/*if 1 - the IOCTL request is in
+ progress */
+ void *param1;
+ void *param2;
+ void *param3;
+};
+
+/* pm8001 workqueue */
+extern struct workqueue_struct *pm8001_wq;
+
+/******************** function prototype *********************/
+int pm8001_tag_alloc(struct pm8001_hba_info *pm8001_ha, u32 *tag_out);
+u32 pm8001_get_ncq_tag(struct sas_task *task, u32 *tag);
+void pm8001_ccb_task_free(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb);
+int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
+ void *funcdata);
+void pm8001_scan_start(struct Scsi_Host *shost);
+int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time);
+int pm8001_queue_command(struct sas_task *task, gfp_t gfp_flags);
+int pm8001_abort_task(struct sas_task *task);
+int pm8001_clear_task_set(struct domain_device *dev, u8 *lun);
+int pm8001_dev_found(struct domain_device *dev);
+void pm8001_dev_gone(struct domain_device *dev);
+int pm8001_lu_reset(struct domain_device *dev, u8 *lun);
+int pm8001_I_T_nexus_reset(struct domain_device *dev);
+int pm8001_I_T_nexus_event_handler(struct domain_device *dev);
+int pm8001_query_task(struct sas_task *task);
+void pm8001_port_formed(struct asd_sas_phy *sas_phy);
+void pm8001_open_reject_retry(
+ struct pm8001_hba_info *pm8001_ha,
+ struct sas_task *task_to_close,
+ struct pm8001_device *device_to_close);
+int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr,
+ dma_addr_t *pphys_addr, u32 *pphys_addr_hi, u32 *pphys_addr_lo,
+ u32 mem_size, u32 align);
+
+void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha);
+int pm8001_mpi_build_cmd(struct pm8001_hba_info *pm8001_ha,
+ u32 q_index, u32 opCode, void *payload, size_t nb,
+ u32 responseQueue);
+int pm8001_mpi_msg_free_get(struct inbound_queue_table *circularQ,
+ u16 messageSize, void **messagePtr);
+u32 pm8001_mpi_msg_free_set(struct pm8001_hba_info *pm8001_ha, void *pMsg,
+ struct outbound_queue_table *circularQ, u8 bc);
+u32 pm8001_mpi_msg_consume(struct pm8001_hba_info *pm8001_ha,
+ struct outbound_queue_table *circularQ,
+ void **messagePtr1, u8 *pBC);
+int pm8001_chip_set_dev_state_req(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_device *pm8001_dev, u32 state);
+int pm8001_chip_fw_flash_update_req(struct pm8001_hba_info *pm8001_ha,
+ void *payload);
+int pm8001_chip_fw_flash_update_build(struct pm8001_hba_info *pm8001_ha,
+ void *fw_flash_updata_info, u32 tag);
+int pm8001_chip_set_nvmd_req(struct pm8001_hba_info *pm8001_ha, void *payload);
+int pm8001_chip_get_nvmd_req(struct pm8001_hba_info *pm8001_ha, void *payload);
+int pm8001_chip_ssp_tm_req(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb,
+ struct sas_tmf_task *tmf);
+int pm8001_chip_abort_task(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb);
+int pm8001_chip_dereg_dev_req(struct pm8001_hba_info *pm8001_ha, u32 device_id);
+void pm8001_chip_make_sg(struct scatterlist *scatter, int nr, void *prd);
+void pm8001_work_fn(struct work_struct *work);
+int pm8001_handle_event(struct pm8001_hba_info *pm8001_ha,
+ void *data, int handler);
+void pm8001_mpi_set_dev_state_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb);
+void pm8001_mpi_set_nvmd_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb);
+void pm8001_mpi_get_nvmd_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb);
+int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha,
+ void *piomb);
+void pm8001_get_lrate_mode(struct pm8001_phy *phy, u8 link_rate);
+void pm8001_get_attached_sas_addr(struct pm8001_phy *phy, u8 *sas_addr);
+void pm8001_bytes_dmaed(struct pm8001_hba_info *pm8001_ha, int i);
+int pm8001_mpi_reg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb);
+int pm8001_mpi_dereg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb);
+int pm8001_mpi_fw_flash_update_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb);
+int pm8001_mpi_general_event(struct pm8001_hba_info *pm8001_ha, void *piomb);
+int pm8001_mpi_task_abort_resp(struct pm8001_hba_info *pm8001_ha, void *piomb);
+void pm8001_tag_free(struct pm8001_hba_info *pm8001_ha, u32 tag);
+struct pm8001_device *pm8001_find_dev(struct pm8001_hba_info *pm8001_ha,
+ u32 device_id);
+int pm80xx_set_thermal_config(struct pm8001_hba_info *pm8001_ha);
+
+int pm8001_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue);
+void pm8001_set_phy_profile(struct pm8001_hba_info *pm8001_ha,
+ u32 length, u8 *buf);
+void pm8001_set_phy_profile_single(struct pm8001_hba_info *pm8001_ha,
+ u32 phy, u32 length, u32 *buf);
+int pm80xx_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue);
+ssize_t pm80xx_get_fatal_dump(struct device *cdev,
+ struct device_attribute *attr, char *buf);
+ssize_t pm80xx_get_non_fatal_dump(struct device *cdev,
+ struct device_attribute *attr, char *buf);
+ssize_t pm8001_get_gsm_dump(struct device *cdev, u32, char *buf);
+int pm80xx_fatal_errors(struct pm8001_hba_info *pm8001_ha);
+void pm8001_free_dev(struct pm8001_device *pm8001_dev);
+/* ctl shared API */
+extern const struct attribute_group *pm8001_host_groups[];
+
+#define PM8001_INVALID_TAG ((u32)-1)
+
+/*
+ * Allocate a new tag and return the corresponding ccb after initializing it.
+ */
+static inline struct pm8001_ccb_info *
+pm8001_ccb_alloc(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_device *dev, struct sas_task *task)
+{
+ struct pm8001_ccb_info *ccb;
+ struct request *rq = NULL;
+ u32 tag;
+
+ if (task)
+ rq = sas_task_find_rq(task);
+
+ if (rq) {
+ tag = rq->tag + PM8001_RESERVE_SLOT;
+ } else if (pm8001_tag_alloc(pm8001_ha, &tag)) {
+ pm8001_dbg(pm8001_ha, FAIL, "Failed to allocate a tag\n");
+ return NULL;
+ }
+
+ ccb = &pm8001_ha->ccb_info[tag];
+ ccb->task = task;
+ ccb->n_elem = 0;
+ ccb->ccb_tag = tag;
+ ccb->device = dev;
+ ccb->fw_control_context = NULL;
+ ccb->open_retry = 0;
+
+ return ccb;
+}
+
+/*
+ * Free the tag of an initialized ccb.
+ */
+static inline void pm8001_ccb_free(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb)
+{
+ u32 tag = ccb->ccb_tag;
+
+ /*
+ * Cleanup the ccb to make sure that a manual scan of the adapter
+ * ccb_info array can detect ccb's that are in use.
+ * C.f. pm8001_open_reject_retry()
+ */
+ ccb->task = NULL;
+ ccb->ccb_tag = PM8001_INVALID_TAG;
+ ccb->device = NULL;
+ ccb->fw_control_context = NULL;
+
+ pm8001_tag_free(pm8001_ha, tag);
+}
+
+static inline void pm8001_ccb_task_free_done(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb)
+{
+ struct sas_task *task = ccb->task;
+
+ pm8001_ccb_task_free(pm8001_ha, ccb);
+ smp_mb(); /*in order to force CPU ordering*/
+ task->task_done(task);
+}
+void pm8001_setds_completion(struct domain_device *dev);
+void pm8001_tmf_aborted(struct sas_task *task);
+
+#endif
+
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
new file mode 100644
index 0000000000..3afd9443c4
--- /dev/null
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -0,0 +1,4940 @@
+/*
+ * PMC-Sierra SPCv/ve 8088/8089 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 PMC-Sierra, Inc.,
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+ #include <linux/slab.h>
+ #include "pm8001_sas.h"
+ #include "pm80xx_hwi.h"
+ #include "pm8001_chips.h"
+ #include "pm8001_ctl.h"
+#include "pm80xx_tracepoints.h"
+
+#define SMP_DIRECT 1
+#define SMP_INDIRECT 2
+
+
+int pm80xx_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shift_value)
+{
+ u32 reg_val;
+ unsigned long start;
+ pm8001_cw32(pm8001_ha, 0, MEMBASE_II_SHIFT_REGISTER, shift_value);
+ /* confirm the setting is written */
+ start = jiffies + HZ; /* 1 sec */
+ do {
+ reg_val = pm8001_cr32(pm8001_ha, 0, MEMBASE_II_SHIFT_REGISTER);
+ } while ((reg_val != shift_value) && time_before(jiffies, start));
+ if (reg_val != shift_value) {
+ pm8001_dbg(pm8001_ha, FAIL, "TIMEOUT:MEMBASE_II_SHIFT_REGISTER = 0x%x\n",
+ reg_val);
+ return -1;
+ }
+ return 0;
+}
+
+static void pm80xx_pci_mem_copy(struct pm8001_hba_info *pm8001_ha, u32 soffset,
+ __le32 *destination,
+ u32 dw_count, u32 bus_base_number)
+{
+ u32 index, value, offset;
+
+ for (index = 0; index < dw_count; index += 4, destination++) {
+ offset = (soffset + index);
+ if (offset < (64 * 1024)) {
+ value = pm8001_cr32(pm8001_ha, bus_base_number, offset);
+ *destination = cpu_to_le32(value);
+ }
+ }
+ return;
+}
+
+ssize_t pm80xx_get_fatal_dump(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+ void __iomem *fatal_table_address = pm8001_ha->fatal_tbl_addr;
+ u32 accum_len, reg_val, index, *temp;
+ u32 status = 1;
+ unsigned long start;
+ u8 *direct_data;
+ char *fatal_error_data = buf;
+ u32 length_to_read;
+ u32 offset;
+
+ pm8001_ha->forensic_info.data_buf.direct_data = buf;
+ if (pm8001_ha->chip_id == chip_8001) {
+ pm8001_ha->forensic_info.data_buf.direct_data +=
+ sprintf(pm8001_ha->forensic_info.data_buf.direct_data,
+ "Not supported for SPC controller");
+ return (char *)pm8001_ha->forensic_info.data_buf.direct_data -
+ (char *)buf;
+ }
+ /* initialize variables for very first call from host application */
+ if (pm8001_ha->forensic_info.data_buf.direct_offset == 0) {
+ pm8001_dbg(pm8001_ha, IO,
+ "forensic_info TYPE_NON_FATAL..............\n");
+ direct_data = (u8 *)fatal_error_data;
+ pm8001_ha->forensic_info.data_type = TYPE_NON_FATAL;
+ pm8001_ha->forensic_info.data_buf.direct_len = SYSFS_OFFSET;
+ pm8001_ha->forensic_info.data_buf.direct_offset = 0;
+ pm8001_ha->forensic_info.data_buf.read_len = 0;
+ pm8001_ha->forensic_preserved_accumulated_transfer = 0;
+
+ /* Write signature to fatal dump table */
+ pm8001_mw32(fatal_table_address,
+ MPI_FATAL_EDUMP_TABLE_SIGNATURE, 0x1234abcd);
+
+ pm8001_ha->forensic_info.data_buf.direct_data = direct_data;
+ pm8001_dbg(pm8001_ha, IO, "ossaHwCB: status1 %d\n", status);
+ pm8001_dbg(pm8001_ha, IO, "ossaHwCB: read_len 0x%x\n",
+ pm8001_ha->forensic_info.data_buf.read_len);
+ pm8001_dbg(pm8001_ha, IO, "ossaHwCB: direct_len 0x%x\n",
+ pm8001_ha->forensic_info.data_buf.direct_len);
+ pm8001_dbg(pm8001_ha, IO, "ossaHwCB: direct_offset 0x%x\n",
+ pm8001_ha->forensic_info.data_buf.direct_offset);
+ }
+ if (pm8001_ha->forensic_info.data_buf.direct_offset == 0) {
+ /* start to get data */
+ /* Program the MEMBASE II Shifting Register with 0x00.*/
+ pm8001_cw32(pm8001_ha, 0, MEMBASE_II_SHIFT_REGISTER,
+ pm8001_ha->fatal_forensic_shift_offset);
+ pm8001_ha->forensic_last_offset = 0;
+ pm8001_ha->forensic_fatal_step = 0;
+ pm8001_ha->fatal_bar_loc = 0;
+ }
+
+ /* Read until accum_len is retrieved */
+ accum_len = pm8001_mr32(fatal_table_address,
+ MPI_FATAL_EDUMP_TABLE_ACCUM_LEN);
+ /* Determine length of data between previously stored transfer length
+ * and current accumulated transfer length
+ */
+ length_to_read =
+ accum_len - pm8001_ha->forensic_preserved_accumulated_transfer;
+ pm8001_dbg(pm8001_ha, IO, "get_fatal_spcv: accum_len 0x%x\n",
+ accum_len);
+ pm8001_dbg(pm8001_ha, IO, "get_fatal_spcv: length_to_read 0x%x\n",
+ length_to_read);
+ pm8001_dbg(pm8001_ha, IO, "get_fatal_spcv: last_offset 0x%x\n",
+ pm8001_ha->forensic_last_offset);
+ pm8001_dbg(pm8001_ha, IO, "get_fatal_spcv: read_len 0x%x\n",
+ pm8001_ha->forensic_info.data_buf.read_len);
+ pm8001_dbg(pm8001_ha, IO, "get_fatal_spcv:: direct_len 0x%x\n",
+ pm8001_ha->forensic_info.data_buf.direct_len);
+ pm8001_dbg(pm8001_ha, IO, "get_fatal_spcv:: direct_offset 0x%x\n",
+ pm8001_ha->forensic_info.data_buf.direct_offset);
+
+ /* If accumulated length failed to read correctly fail the attempt.*/
+ if (accum_len == 0xFFFFFFFF) {
+ pm8001_dbg(pm8001_ha, IO,
+ "Possible PCI issue 0x%x not expected\n",
+ accum_len);
+ return status;
+ }
+ /* If accumulated length is zero fail the attempt */
+ if (accum_len == 0) {
+ pm8001_ha->forensic_info.data_buf.direct_data +=
+ sprintf(pm8001_ha->forensic_info.data_buf.direct_data,
+ "%08x ", 0xFFFFFFFF);
+ return (char *)pm8001_ha->forensic_info.data_buf.direct_data -
+ (char *)buf;
+ }
+ /* Accumulated length is good so start capturing the first data */
+ temp = (u32 *)pm8001_ha->memoryMap.region[FORENSIC_MEM].virt_ptr;
+ if (pm8001_ha->forensic_fatal_step == 0) {
+moreData:
+ /* If data to read is less than SYSFS_OFFSET then reduce the
+ * length of dataLen
+ */
+ if (pm8001_ha->forensic_last_offset + SYSFS_OFFSET
+ > length_to_read) {
+ pm8001_ha->forensic_info.data_buf.direct_len =
+ length_to_read -
+ pm8001_ha->forensic_last_offset;
+ } else {
+ pm8001_ha->forensic_info.data_buf.direct_len =
+ SYSFS_OFFSET;
+ }
+ if (pm8001_ha->forensic_info.data_buf.direct_data) {
+ /* Data is in bar, copy to host memory */
+ pm80xx_pci_mem_copy(pm8001_ha,
+ pm8001_ha->fatal_bar_loc,
+ pm8001_ha->memoryMap.region[FORENSIC_MEM].virt_ptr,
+ pm8001_ha->forensic_info.data_buf.direct_len, 1);
+ }
+ pm8001_ha->fatal_bar_loc +=
+ pm8001_ha->forensic_info.data_buf.direct_len;
+ pm8001_ha->forensic_info.data_buf.direct_offset +=
+ pm8001_ha->forensic_info.data_buf.direct_len;
+ pm8001_ha->forensic_last_offset +=
+ pm8001_ha->forensic_info.data_buf.direct_len;
+ pm8001_ha->forensic_info.data_buf.read_len =
+ pm8001_ha->forensic_info.data_buf.direct_len;
+
+ if (pm8001_ha->forensic_last_offset >= length_to_read) {
+ pm8001_ha->forensic_info.data_buf.direct_data +=
+ sprintf(pm8001_ha->forensic_info.data_buf.direct_data,
+ "%08x ", 3);
+ for (index = 0; index <
+ (pm8001_ha->forensic_info.data_buf.direct_len
+ / 4); index++) {
+ pm8001_ha->forensic_info.data_buf.direct_data +=
+ sprintf(
+ pm8001_ha->forensic_info.data_buf.direct_data,
+ "%08x ", *(temp + index));
+ }
+
+ pm8001_ha->fatal_bar_loc = 0;
+ pm8001_ha->forensic_fatal_step = 1;
+ pm8001_ha->fatal_forensic_shift_offset = 0;
+ pm8001_ha->forensic_last_offset = 0;
+ status = 0;
+ offset = (int)
+ ((char *)pm8001_ha->forensic_info.data_buf.direct_data
+ - (char *)buf);
+ pm8001_dbg(pm8001_ha, IO,
+ "get_fatal_spcv:return1 0x%x\n", offset);
+ return (char *)pm8001_ha->
+ forensic_info.data_buf.direct_data -
+ (char *)buf;
+ }
+ if (pm8001_ha->fatal_bar_loc < (64 * 1024)) {
+ pm8001_ha->forensic_info.data_buf.direct_data +=
+ sprintf(pm8001_ha->
+ forensic_info.data_buf.direct_data,
+ "%08x ", 2);
+ for (index = 0; index <
+ (pm8001_ha->forensic_info.data_buf.direct_len
+ / 4); index++) {
+ pm8001_ha->forensic_info.data_buf.direct_data
+ += sprintf(pm8001_ha->
+ forensic_info.data_buf.direct_data,
+ "%08x ", *(temp + index));
+ }
+ status = 0;
+ offset = (int)
+ ((char *)pm8001_ha->forensic_info.data_buf.direct_data
+ - (char *)buf);
+ pm8001_dbg(pm8001_ha, IO,
+ "get_fatal_spcv:return2 0x%x\n", offset);
+ return (char *)pm8001_ha->
+ forensic_info.data_buf.direct_data -
+ (char *)buf;
+ }
+
+ /* Increment the MEMBASE II Shifting Register value by 0x100.*/
+ pm8001_ha->forensic_info.data_buf.direct_data +=
+ sprintf(pm8001_ha->forensic_info.data_buf.direct_data,
+ "%08x ", 2);
+ for (index = 0; index <
+ (pm8001_ha->forensic_info.data_buf.direct_len
+ / 4) ; index++) {
+ pm8001_ha->forensic_info.data_buf.direct_data +=
+ sprintf(pm8001_ha->
+ forensic_info.data_buf.direct_data,
+ "%08x ", *(temp + index));
+ }
+ pm8001_ha->fatal_forensic_shift_offset += 0x100;
+ pm8001_cw32(pm8001_ha, 0, MEMBASE_II_SHIFT_REGISTER,
+ pm8001_ha->fatal_forensic_shift_offset);
+ pm8001_ha->fatal_bar_loc = 0;
+ status = 0;
+ offset = (int)
+ ((char *)pm8001_ha->forensic_info.data_buf.direct_data
+ - (char *)buf);
+ pm8001_dbg(pm8001_ha, IO, "get_fatal_spcv: return3 0x%x\n",
+ offset);
+ return (char *)pm8001_ha->forensic_info.data_buf.direct_data -
+ (char *)buf;
+ }
+ if (pm8001_ha->forensic_fatal_step == 1) {
+ /* store previous accumulated length before triggering next
+ * accumulated length update
+ */
+ pm8001_ha->forensic_preserved_accumulated_transfer =
+ pm8001_mr32(fatal_table_address,
+ MPI_FATAL_EDUMP_TABLE_ACCUM_LEN);
+
+ /* continue capturing the fatal log until Dump status is 0x3 */
+ if (pm8001_mr32(fatal_table_address,
+ MPI_FATAL_EDUMP_TABLE_STATUS) <
+ MPI_FATAL_EDUMP_TABLE_STAT_NF_SUCCESS_DONE) {
+
+ /* reset fddstat bit by writing to zero*/
+ pm8001_mw32(fatal_table_address,
+ MPI_FATAL_EDUMP_TABLE_STATUS, 0x0);
+
+ /* set dump control value to '1' so that new data will
+ * be transferred to shared memory
+ */
+ pm8001_mw32(fatal_table_address,
+ MPI_FATAL_EDUMP_TABLE_HANDSHAKE,
+ MPI_FATAL_EDUMP_HANDSHAKE_RDY);
+
+ /*Poll FDDHSHK until clear */
+ start = jiffies + (2 * HZ); /* 2 sec */
+
+ do {
+ reg_val = pm8001_mr32(fatal_table_address,
+ MPI_FATAL_EDUMP_TABLE_HANDSHAKE);
+ } while ((reg_val) && time_before(jiffies, start));
+
+ if (reg_val != 0) {
+ pm8001_dbg(pm8001_ha, FAIL,
+ "TIMEOUT:MPI_FATAL_EDUMP_TABLE_HDSHAKE 0x%x\n",
+ reg_val);
+ /* Fail the dump if a timeout occurs */
+ pm8001_ha->forensic_info.data_buf.direct_data +=
+ sprintf(
+ pm8001_ha->forensic_info.data_buf.direct_data,
+ "%08x ", 0xFFFFFFFF);
+ return((char *)
+ pm8001_ha->forensic_info.data_buf.direct_data
+ - (char *)buf);
+ }
+ /* Poll status register until set to 2 or
+ * 3 for up to 2 seconds
+ */
+ start = jiffies + (2 * HZ); /* 2 sec */
+
+ do {
+ reg_val = pm8001_mr32(fatal_table_address,
+ MPI_FATAL_EDUMP_TABLE_STATUS);
+ } while (((reg_val != 2) && (reg_val != 3)) &&
+ time_before(jiffies, start));
+
+ if (reg_val < 2) {
+ pm8001_dbg(pm8001_ha, FAIL,
+ "TIMEOUT:MPI_FATAL_EDUMP_TABLE_STATUS = 0x%x\n",
+ reg_val);
+ /* Fail the dump if a timeout occurs */
+ pm8001_ha->forensic_info.data_buf.direct_data +=
+ sprintf(
+ pm8001_ha->forensic_info.data_buf.direct_data,
+ "%08x ", 0xFFFFFFFF);
+ return((char *)pm8001_ha->forensic_info.data_buf.direct_data -
+ (char *)buf);
+ }
+ /* reset fatal_forensic_shift_offset back to zero and reset MEMBASE 2 register to zero */
+ pm8001_ha->fatal_forensic_shift_offset = 0; /* location in 64k region */
+ pm8001_cw32(pm8001_ha, 0,
+ MEMBASE_II_SHIFT_REGISTER,
+ pm8001_ha->fatal_forensic_shift_offset);
+ }
+ /* Read the next block of the debug data.*/
+ length_to_read = pm8001_mr32(fatal_table_address,
+ MPI_FATAL_EDUMP_TABLE_ACCUM_LEN) -
+ pm8001_ha->forensic_preserved_accumulated_transfer;
+ if (length_to_read != 0x0) {
+ pm8001_ha->forensic_fatal_step = 0;
+ goto moreData;
+ } else {
+ pm8001_ha->forensic_info.data_buf.direct_data +=
+ sprintf(pm8001_ha->forensic_info.data_buf.direct_data,
+ "%08x ", 4);
+ pm8001_ha->forensic_info.data_buf.read_len = 0xFFFFFFFF;
+ pm8001_ha->forensic_info.data_buf.direct_len = 0;
+ pm8001_ha->forensic_info.data_buf.direct_offset = 0;
+ pm8001_ha->forensic_info.data_buf.read_len = 0;
+ }
+ }
+ offset = (int)((char *)pm8001_ha->forensic_info.data_buf.direct_data
+ - (char *)buf);
+ pm8001_dbg(pm8001_ha, IO, "get_fatal_spcv: return4 0x%x\n", offset);
+ return ((char *)pm8001_ha->forensic_info.data_buf.direct_data -
+ (char *)buf);
+}
+
+/* pm80xx_get_non_fatal_dump - dump the nonfatal data from the dma
+ * location by the firmware.
+ */
+ssize_t pm80xx_get_non_fatal_dump(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+ void __iomem *nonfatal_table_address = pm8001_ha->fatal_tbl_addr;
+ u32 accum_len = 0;
+ u32 total_len = 0;
+ u32 reg_val = 0;
+ u32 *temp = NULL;
+ u32 index = 0;
+ u32 output_length;
+ unsigned long start = 0;
+ char *buf_copy = buf;
+
+ temp = (u32 *)pm8001_ha->memoryMap.region[FORENSIC_MEM].virt_ptr;
+ if (++pm8001_ha->non_fatal_count == 1) {
+ if (pm8001_ha->chip_id == chip_8001) {
+ snprintf(pm8001_ha->forensic_info.data_buf.direct_data,
+ PAGE_SIZE, "Not supported for SPC controller");
+ return 0;
+ }
+ pm8001_dbg(pm8001_ha, IO, "forensic_info TYPE_NON_FATAL...\n");
+ /*
+ * Step 1: Write the host buffer parameters in the MPI Fatal and
+ * Non-Fatal Error Dump Capture Table.This is the buffer
+ * where debug data will be DMAed to.
+ */
+ pm8001_mw32(nonfatal_table_address,
+ MPI_FATAL_EDUMP_TABLE_LO_OFFSET,
+ pm8001_ha->memoryMap.region[FORENSIC_MEM].phys_addr_lo);
+
+ pm8001_mw32(nonfatal_table_address,
+ MPI_FATAL_EDUMP_TABLE_HI_OFFSET,
+ pm8001_ha->memoryMap.region[FORENSIC_MEM].phys_addr_hi);
+
+ pm8001_mw32(nonfatal_table_address,
+ MPI_FATAL_EDUMP_TABLE_LENGTH, SYSFS_OFFSET);
+
+ /* Optionally, set the DUMPCTRL bit to 1 if the host
+ * keeps sending active I/Os while capturing the non-fatal
+ * debug data. Otherwise, leave this bit set to zero
+ */
+ pm8001_mw32(nonfatal_table_address,
+ MPI_FATAL_EDUMP_TABLE_HANDSHAKE, MPI_FATAL_EDUMP_HANDSHAKE_RDY);
+
+ /*
+ * Step 2: Clear Accumulative Length of Debug Data Transferred
+ * [ACCDDLEN] field in the MPI Fatal and Non-Fatal Error Dump
+ * Capture Table to zero.
+ */
+ pm8001_mw32(nonfatal_table_address,
+ MPI_FATAL_EDUMP_TABLE_ACCUM_LEN, 0);
+
+ /* initiallize previous accumulated length to 0 */
+ pm8001_ha->forensic_preserved_accumulated_transfer = 0;
+ pm8001_ha->non_fatal_read_length = 0;
+ }
+
+ total_len = pm8001_mr32(nonfatal_table_address,
+ MPI_FATAL_EDUMP_TABLE_TOTAL_LEN);
+ /*
+ * Step 3:Clear Fatal/Non-Fatal Debug Data Transfer Status [FDDTSTAT]
+ * field and then request that the SPCv controller transfer the debug
+ * data by setting bit 7 of the Inbound Doorbell Set Register.
+ */
+ pm8001_mw32(nonfatal_table_address, MPI_FATAL_EDUMP_TABLE_STATUS, 0);
+ pm8001_cw32(pm8001_ha, 0, MSGU_IBDB_SET,
+ SPCv_MSGU_CFG_TABLE_NONFATAL_DUMP);
+
+ /*
+ * Step 4.1: Read back the Inbound Doorbell Set Register (by polling for
+ * 2 seconds) until register bit 7 is cleared.
+ * This step only indicates the request is accepted by the controller.
+ */
+ start = jiffies + (2 * HZ); /* 2 sec */
+ do {
+ reg_val = pm8001_cr32(pm8001_ha, 0, MSGU_IBDB_SET) &
+ SPCv_MSGU_CFG_TABLE_NONFATAL_DUMP;
+ } while ((reg_val != 0) && time_before(jiffies, start));
+
+ /* Step 4.2: To check the completion of the transfer, poll the Fatal/Non
+ * Fatal Debug Data Transfer Status [FDDTSTAT] field for 2 seconds in
+ * the MPI Fatal and Non-Fatal Error Dump Capture Table.
+ */
+ start = jiffies + (2 * HZ); /* 2 sec */
+ do {
+ reg_val = pm8001_mr32(nonfatal_table_address,
+ MPI_FATAL_EDUMP_TABLE_STATUS);
+ } while ((!reg_val) && time_before(jiffies, start));
+
+ if ((reg_val == 0x00) ||
+ (reg_val == MPI_FATAL_EDUMP_TABLE_STAT_DMA_FAILED) ||
+ (reg_val > MPI_FATAL_EDUMP_TABLE_STAT_NF_SUCCESS_DONE)) {
+ pm8001_ha->non_fatal_read_length = 0;
+ buf_copy += snprintf(buf_copy, PAGE_SIZE, "%08x ", 0xFFFFFFFF);
+ pm8001_ha->non_fatal_count = 0;
+ return (buf_copy - buf);
+ } else if (reg_val ==
+ MPI_FATAL_EDUMP_TABLE_STAT_NF_SUCCESS_MORE_DATA) {
+ buf_copy += snprintf(buf_copy, PAGE_SIZE, "%08x ", 2);
+ } else if ((reg_val == MPI_FATAL_EDUMP_TABLE_STAT_NF_SUCCESS_DONE) ||
+ (pm8001_ha->non_fatal_read_length >= total_len)) {
+ pm8001_ha->non_fatal_read_length = 0;
+ buf_copy += snprintf(buf_copy, PAGE_SIZE, "%08x ", 4);
+ pm8001_ha->non_fatal_count = 0;
+ }
+ accum_len = pm8001_mr32(nonfatal_table_address,
+ MPI_FATAL_EDUMP_TABLE_ACCUM_LEN);
+ output_length = accum_len -
+ pm8001_ha->forensic_preserved_accumulated_transfer;
+
+ for (index = 0; index < output_length/4; index++)
+ buf_copy += snprintf(buf_copy, PAGE_SIZE,
+ "%08x ", *(temp+index));
+
+ pm8001_ha->non_fatal_read_length += output_length;
+
+ /* store current accumulated length to use in next iteration as
+ * the previous accumulated length
+ */
+ pm8001_ha->forensic_preserved_accumulated_transfer = accum_len;
+ return (buf_copy - buf);
+}
+
+/**
+ * read_main_config_table - read the configure table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void read_main_config_table(struct pm8001_hba_info *pm8001_ha)
+{
+ void __iomem *address = pm8001_ha->main_cfg_tbl_addr;
+
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.signature =
+ pm8001_mr32(address, MAIN_SIGNATURE_OFFSET);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.interface_rev =
+ pm8001_mr32(address, MAIN_INTERFACE_REVISION);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.firmware_rev =
+ pm8001_mr32(address, MAIN_FW_REVISION);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.max_out_io =
+ pm8001_mr32(address, MAIN_MAX_OUTSTANDING_IO_OFFSET);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.max_sgl =
+ pm8001_mr32(address, MAIN_MAX_SGL_OFFSET);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.ctrl_cap_flag =
+ pm8001_mr32(address, MAIN_CNTRL_CAP_OFFSET);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.gst_offset =
+ pm8001_mr32(address, MAIN_GST_OFFSET);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.inbound_queue_offset =
+ pm8001_mr32(address, MAIN_IBQ_OFFSET);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.outbound_queue_offset =
+ pm8001_mr32(address, MAIN_OBQ_OFFSET);
+
+ /* read Error Dump Offset and Length */
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_dump_offset0 =
+ pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP0_OFFSET);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_dump_length0 =
+ pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP0_LENGTH);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_dump_offset1 =
+ pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP1_OFFSET);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_dump_length1 =
+ pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP1_LENGTH);
+
+ /* read GPIO LED settings from the configuration table */
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.gpio_led_mapping =
+ pm8001_mr32(address, MAIN_GPIO_LED_FLAGS_OFFSET);
+
+ /* read analog Setting offset from the configuration table */
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.analog_setup_table_offset =
+ pm8001_mr32(address, MAIN_ANALOG_SETUP_OFFSET);
+
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.int_vec_table_offset =
+ pm8001_mr32(address, MAIN_INT_VECTOR_TABLE_OFFSET);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.phy_attr_table_offset =
+ pm8001_mr32(address, MAIN_SAS_PHY_ATTR_TABLE_OFFSET);
+ /* read port recover and reset timeout */
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer =
+ pm8001_mr32(address, MAIN_PORT_RECOVERY_TIMER);
+ /* read ILA and inactive firmware version */
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.ila_version =
+ pm8001_mr32(address, MAIN_MPI_ILA_RELEASE_TYPE);
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.inc_fw_version =
+ pm8001_mr32(address, MAIN_MPI_INACTIVE_FW_VERSION);
+
+ pm8001_dbg(pm8001_ha, DEV,
+ "Main cfg table: sign:%x interface rev:%x fw_rev:%x\n",
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.signature,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.interface_rev,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.firmware_rev);
+
+ pm8001_dbg(pm8001_ha, DEV,
+ "table offset: gst:%x iq:%x oq:%x int vec:%x phy attr:%x\n",
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.gst_offset,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.inbound_queue_offset,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.outbound_queue_offset,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.int_vec_table_offset,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.phy_attr_table_offset);
+
+ pm8001_dbg(pm8001_ha, DEV,
+ "Main cfg table; ila rev:%x Inactive fw rev:%x\n",
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.ila_version,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.inc_fw_version);
+}
+
+/**
+ * read_general_status_table - read the general status table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void read_general_status_table(struct pm8001_hba_info *pm8001_ha)
+{
+ void __iomem *address = pm8001_ha->general_stat_tbl_addr;
+ pm8001_ha->gs_tbl.pm80xx_tbl.gst_len_mpistate =
+ pm8001_mr32(address, GST_GSTLEN_MPIS_OFFSET);
+ pm8001_ha->gs_tbl.pm80xx_tbl.iq_freeze_state0 =
+ pm8001_mr32(address, GST_IQ_FREEZE_STATE0_OFFSET);
+ pm8001_ha->gs_tbl.pm80xx_tbl.iq_freeze_state1 =
+ pm8001_mr32(address, GST_IQ_FREEZE_STATE1_OFFSET);
+ pm8001_ha->gs_tbl.pm80xx_tbl.msgu_tcnt =
+ pm8001_mr32(address, GST_MSGUTCNT_OFFSET);
+ pm8001_ha->gs_tbl.pm80xx_tbl.iop_tcnt =
+ pm8001_mr32(address, GST_IOPTCNT_OFFSET);
+ pm8001_ha->gs_tbl.pm80xx_tbl.gpio_input_val =
+ pm8001_mr32(address, GST_GPIO_INPUT_VAL);
+ pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[0] =
+ pm8001_mr32(address, GST_RERRINFO_OFFSET0);
+ pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[1] =
+ pm8001_mr32(address, GST_RERRINFO_OFFSET1);
+ pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[2] =
+ pm8001_mr32(address, GST_RERRINFO_OFFSET2);
+ pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[3] =
+ pm8001_mr32(address, GST_RERRINFO_OFFSET3);
+ pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[4] =
+ pm8001_mr32(address, GST_RERRINFO_OFFSET4);
+ pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[5] =
+ pm8001_mr32(address, GST_RERRINFO_OFFSET5);
+ pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[6] =
+ pm8001_mr32(address, GST_RERRINFO_OFFSET6);
+ pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[7] =
+ pm8001_mr32(address, GST_RERRINFO_OFFSET7);
+}
+/**
+ * read_phy_attr_table - read the phy attribute table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void read_phy_attr_table(struct pm8001_hba_info *pm8001_ha)
+{
+ void __iomem *address = pm8001_ha->pspa_q_tbl_addr;
+ pm8001_ha->phy_attr_table.phystart1_16[0] =
+ pm8001_mr32(address, PSPA_PHYSTATE0_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[1] =
+ pm8001_mr32(address, PSPA_PHYSTATE1_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[2] =
+ pm8001_mr32(address, PSPA_PHYSTATE2_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[3] =
+ pm8001_mr32(address, PSPA_PHYSTATE3_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[4] =
+ pm8001_mr32(address, PSPA_PHYSTATE4_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[5] =
+ pm8001_mr32(address, PSPA_PHYSTATE5_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[6] =
+ pm8001_mr32(address, PSPA_PHYSTATE6_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[7] =
+ pm8001_mr32(address, PSPA_PHYSTATE7_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[8] =
+ pm8001_mr32(address, PSPA_PHYSTATE8_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[9] =
+ pm8001_mr32(address, PSPA_PHYSTATE9_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[10] =
+ pm8001_mr32(address, PSPA_PHYSTATE10_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[11] =
+ pm8001_mr32(address, PSPA_PHYSTATE11_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[12] =
+ pm8001_mr32(address, PSPA_PHYSTATE12_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[13] =
+ pm8001_mr32(address, PSPA_PHYSTATE13_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[14] =
+ pm8001_mr32(address, PSPA_PHYSTATE14_OFFSET);
+ pm8001_ha->phy_attr_table.phystart1_16[15] =
+ pm8001_mr32(address, PSPA_PHYSTATE15_OFFSET);
+
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[0] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID0_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[1] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID1_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[2] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID2_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[3] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID3_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[4] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID4_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[5] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID5_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[6] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID6_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[7] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID7_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[8] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID8_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[9] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID9_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[10] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID10_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[11] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID11_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[12] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID12_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[13] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID13_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[14] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID14_OFFSET);
+ pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[15] =
+ pm8001_mr32(address, PSPA_OB_HW_EVENT_PID15_OFFSET);
+
+}
+
+/**
+ * read_inbnd_queue_table - read the inbound queue table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void read_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
+{
+ int i;
+ void __iomem *address = pm8001_ha->inbnd_q_tbl_addr;
+ for (i = 0; i < PM8001_MAX_INB_NUM; i++) {
+ u32 offset = i * 0x20;
+ pm8001_ha->inbnd_q_tbl[i].pi_pci_bar =
+ get_pci_bar_index(pm8001_mr32(address,
+ (offset + IB_PIPCI_BAR)));
+ pm8001_ha->inbnd_q_tbl[i].pi_offset =
+ pm8001_mr32(address, (offset + IB_PIPCI_BAR_OFFSET));
+ }
+}
+
+/**
+ * read_outbnd_queue_table - read the outbound queue table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void read_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
+{
+ int i;
+ void __iomem *address = pm8001_ha->outbnd_q_tbl_addr;
+ for (i = 0; i < PM8001_MAX_OUTB_NUM; i++) {
+ u32 offset = i * 0x24;
+ pm8001_ha->outbnd_q_tbl[i].ci_pci_bar =
+ get_pci_bar_index(pm8001_mr32(address,
+ (offset + OB_CIPCI_BAR)));
+ pm8001_ha->outbnd_q_tbl[i].ci_offset =
+ pm8001_mr32(address, (offset + OB_CIPCI_BAR_OFFSET));
+ }
+}
+
+/**
+ * init_default_table_values - init the default table.
+ * @pm8001_ha: our hba card information
+ */
+static void init_default_table_values(struct pm8001_hba_info *pm8001_ha)
+{
+ int i;
+ u32 offsetib, offsetob;
+ void __iomem *addressib = pm8001_ha->inbnd_q_tbl_addr;
+ void __iomem *addressob = pm8001_ha->outbnd_q_tbl_addr;
+ u32 ib_offset = pm8001_ha->ib_offset;
+ u32 ob_offset = pm8001_ha->ob_offset;
+ u32 ci_offset = pm8001_ha->ci_offset;
+ u32 pi_offset = pm8001_ha->pi_offset;
+
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.upper_event_log_addr =
+ pm8001_ha->memoryMap.region[AAP1].phys_addr_hi;
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.lower_event_log_addr =
+ pm8001_ha->memoryMap.region[AAP1].phys_addr_lo;
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.event_log_size =
+ PM8001_EVENT_LOG_SIZE;
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.event_log_severity = 0x01;
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.upper_pcs_event_log_addr =
+ pm8001_ha->memoryMap.region[IOP].phys_addr_hi;
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.lower_pcs_event_log_addr =
+ pm8001_ha->memoryMap.region[IOP].phys_addr_lo;
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_size =
+ PM8001_EVENT_LOG_SIZE;
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_severity = 0x01;
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt = 0x01;
+
+ /* Enable higher IQs and OQs, 32 to 63, bit 16 */
+ if (pm8001_ha->max_q_num > 32)
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt |=
+ 1 << 16;
+ /* Disable end to end CRC checking */
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.crc_core_dump = (0x1 << 16);
+
+ for (i = 0; i < pm8001_ha->max_q_num; i++) {
+ pm8001_ha->inbnd_q_tbl[i].element_pri_size_cnt =
+ PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x00<<30);
+ pm8001_ha->inbnd_q_tbl[i].upper_base_addr =
+ pm8001_ha->memoryMap.region[ib_offset + i].phys_addr_hi;
+ pm8001_ha->inbnd_q_tbl[i].lower_base_addr =
+ pm8001_ha->memoryMap.region[ib_offset + i].phys_addr_lo;
+ pm8001_ha->inbnd_q_tbl[i].base_virt =
+ (u8 *)pm8001_ha->memoryMap.region[ib_offset + i].virt_ptr;
+ pm8001_ha->inbnd_q_tbl[i].total_length =
+ pm8001_ha->memoryMap.region[ib_offset + i].total_len;
+ pm8001_ha->inbnd_q_tbl[i].ci_upper_base_addr =
+ pm8001_ha->memoryMap.region[ci_offset + i].phys_addr_hi;
+ pm8001_ha->inbnd_q_tbl[i].ci_lower_base_addr =
+ pm8001_ha->memoryMap.region[ci_offset + i].phys_addr_lo;
+ pm8001_ha->inbnd_q_tbl[i].ci_virt =
+ pm8001_ha->memoryMap.region[ci_offset + i].virt_ptr;
+ pm8001_write_32(pm8001_ha->inbnd_q_tbl[i].ci_virt, 0, 0);
+ offsetib = i * 0x20;
+ pm8001_ha->inbnd_q_tbl[i].pi_pci_bar =
+ get_pci_bar_index(pm8001_mr32(addressib,
+ (offsetib + 0x14)));
+ pm8001_ha->inbnd_q_tbl[i].pi_offset =
+ pm8001_mr32(addressib, (offsetib + 0x18));
+ pm8001_ha->inbnd_q_tbl[i].producer_idx = 0;
+ pm8001_ha->inbnd_q_tbl[i].consumer_index = 0;
+
+ pm8001_dbg(pm8001_ha, DEV,
+ "IQ %d pi_bar 0x%x pi_offset 0x%x\n", i,
+ pm8001_ha->inbnd_q_tbl[i].pi_pci_bar,
+ pm8001_ha->inbnd_q_tbl[i].pi_offset);
+ }
+ for (i = 0; i < pm8001_ha->max_q_num; i++) {
+ pm8001_ha->outbnd_q_tbl[i].element_size_cnt =
+ PM8001_MPI_QUEUE | (pm8001_ha->iomb_size << 16) | (0x01<<30);
+ pm8001_ha->outbnd_q_tbl[i].upper_base_addr =
+ pm8001_ha->memoryMap.region[ob_offset + i].phys_addr_hi;
+ pm8001_ha->outbnd_q_tbl[i].lower_base_addr =
+ pm8001_ha->memoryMap.region[ob_offset + i].phys_addr_lo;
+ pm8001_ha->outbnd_q_tbl[i].base_virt =
+ (u8 *)pm8001_ha->memoryMap.region[ob_offset + i].virt_ptr;
+ pm8001_ha->outbnd_q_tbl[i].total_length =
+ pm8001_ha->memoryMap.region[ob_offset + i].total_len;
+ pm8001_ha->outbnd_q_tbl[i].pi_upper_base_addr =
+ pm8001_ha->memoryMap.region[pi_offset + i].phys_addr_hi;
+ pm8001_ha->outbnd_q_tbl[i].pi_lower_base_addr =
+ pm8001_ha->memoryMap.region[pi_offset + i].phys_addr_lo;
+ /* interrupt vector based on oq */
+ pm8001_ha->outbnd_q_tbl[i].interrup_vec_cnt_delay = (i << 24);
+ pm8001_ha->outbnd_q_tbl[i].pi_virt =
+ pm8001_ha->memoryMap.region[pi_offset + i].virt_ptr;
+ pm8001_write_32(pm8001_ha->outbnd_q_tbl[i].pi_virt, 0, 0);
+ offsetob = i * 0x24;
+ pm8001_ha->outbnd_q_tbl[i].ci_pci_bar =
+ get_pci_bar_index(pm8001_mr32(addressob,
+ offsetob + 0x14));
+ pm8001_ha->outbnd_q_tbl[i].ci_offset =
+ pm8001_mr32(addressob, (offsetob + 0x18));
+ pm8001_ha->outbnd_q_tbl[i].consumer_idx = 0;
+ pm8001_ha->outbnd_q_tbl[i].producer_index = 0;
+
+ pm8001_dbg(pm8001_ha, DEV,
+ "OQ %d ci_bar 0x%x ci_offset 0x%x\n", i,
+ pm8001_ha->outbnd_q_tbl[i].ci_pci_bar,
+ pm8001_ha->outbnd_q_tbl[i].ci_offset);
+ }
+}
+
+/**
+ * update_main_config_table - update the main default table to the HBA.
+ * @pm8001_ha: our hba card information
+ */
+static void update_main_config_table(struct pm8001_hba_info *pm8001_ha)
+{
+ void __iomem *address = pm8001_ha->main_cfg_tbl_addr;
+ pm8001_mw32(address, MAIN_IQNPPD_HPPD_OFFSET,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.inbound_q_nppd_hppd);
+ pm8001_mw32(address, MAIN_EVENT_LOG_ADDR_HI,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.upper_event_log_addr);
+ pm8001_mw32(address, MAIN_EVENT_LOG_ADDR_LO,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.lower_event_log_addr);
+ pm8001_mw32(address, MAIN_EVENT_LOG_BUFF_SIZE,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.event_log_size);
+ pm8001_mw32(address, MAIN_EVENT_LOG_OPTION,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.event_log_severity);
+ pm8001_mw32(address, MAIN_PCS_EVENT_LOG_ADDR_HI,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.upper_pcs_event_log_addr);
+ pm8001_mw32(address, MAIN_PCS_EVENT_LOG_ADDR_LO,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.lower_pcs_event_log_addr);
+ pm8001_mw32(address, MAIN_PCS_EVENT_LOG_BUFF_SIZE,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_size);
+ pm8001_mw32(address, MAIN_PCS_EVENT_LOG_OPTION,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_severity);
+ /* Update Fatal error interrupt vector */
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt |=
+ ((pm8001_ha->max_q_num - 1) << 8);
+ pm8001_mw32(address, MAIN_FATAL_ERROR_INTERRUPT,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt);
+ pm8001_dbg(pm8001_ha, DEV,
+ "Updated Fatal error interrupt vector 0x%x\n",
+ pm8001_mr32(address, MAIN_FATAL_ERROR_INTERRUPT));
+
+ pm8001_mw32(address, MAIN_EVENT_CRC_CHECK,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.crc_core_dump);
+
+ /* SPCv specific */
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.gpio_led_mapping &= 0xCFFFFFFF;
+ /* Set GPIOLED to 0x2 for LED indicator */
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.gpio_led_mapping |= 0x20000000;
+ pm8001_mw32(address, MAIN_GPIO_LED_FLAGS_OFFSET,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.gpio_led_mapping);
+ pm8001_dbg(pm8001_ha, DEV,
+ "Programming DW 0x21 in main cfg table with 0x%x\n",
+ pm8001_mr32(address, MAIN_GPIO_LED_FLAGS_OFFSET));
+
+ pm8001_mw32(address, MAIN_PORT_RECOVERY_TIMER,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer);
+ pm8001_mw32(address, MAIN_INT_REASSERTION_DELAY,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.interrupt_reassertion_delay);
+
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer &= 0xffff0000;
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer |=
+ PORT_RECOVERY_TIMEOUT;
+ if (pm8001_ha->chip_id == chip_8006) {
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer &=
+ 0x0000ffff;
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer |=
+ CHIP_8006_PORT_RECOVERY_TIMEOUT;
+ }
+ pm8001_mw32(address, MAIN_PORT_RECOVERY_TIMER,
+ pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer);
+}
+
+/**
+ * update_inbnd_queue_table - update the inbound queue table to the HBA.
+ * @pm8001_ha: our hba card information
+ * @number: entry in the queue
+ */
+static void update_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha,
+ int number)
+{
+ void __iomem *address = pm8001_ha->inbnd_q_tbl_addr;
+ u16 offset = number * 0x20;
+ pm8001_mw32(address, offset + IB_PROPERITY_OFFSET,
+ pm8001_ha->inbnd_q_tbl[number].element_pri_size_cnt);
+ pm8001_mw32(address, offset + IB_BASE_ADDR_HI_OFFSET,
+ pm8001_ha->inbnd_q_tbl[number].upper_base_addr);
+ pm8001_mw32(address, offset + IB_BASE_ADDR_LO_OFFSET,
+ pm8001_ha->inbnd_q_tbl[number].lower_base_addr);
+ pm8001_mw32(address, offset + IB_CI_BASE_ADDR_HI_OFFSET,
+ pm8001_ha->inbnd_q_tbl[number].ci_upper_base_addr);
+ pm8001_mw32(address, offset + IB_CI_BASE_ADDR_LO_OFFSET,
+ pm8001_ha->inbnd_q_tbl[number].ci_lower_base_addr);
+
+ pm8001_dbg(pm8001_ha, DEV,
+ "IQ %d: Element pri size 0x%x\n",
+ number,
+ pm8001_ha->inbnd_q_tbl[number].element_pri_size_cnt);
+
+ pm8001_dbg(pm8001_ha, DEV,
+ "IQ upr base addr 0x%x IQ lwr base addr 0x%x\n",
+ pm8001_ha->inbnd_q_tbl[number].upper_base_addr,
+ pm8001_ha->inbnd_q_tbl[number].lower_base_addr);
+
+ pm8001_dbg(pm8001_ha, DEV,
+ "CI upper base addr 0x%x CI lower base addr 0x%x\n",
+ pm8001_ha->inbnd_q_tbl[number].ci_upper_base_addr,
+ pm8001_ha->inbnd_q_tbl[number].ci_lower_base_addr);
+}
+
+/**
+ * update_outbnd_queue_table - update the outbound queue table to the HBA.
+ * @pm8001_ha: our hba card information
+ * @number: entry in the queue
+ */
+static void update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha,
+ int number)
+{
+ void __iomem *address = pm8001_ha->outbnd_q_tbl_addr;
+ u16 offset = number * 0x24;
+ pm8001_mw32(address, offset + OB_PROPERITY_OFFSET,
+ pm8001_ha->outbnd_q_tbl[number].element_size_cnt);
+ pm8001_mw32(address, offset + OB_BASE_ADDR_HI_OFFSET,
+ pm8001_ha->outbnd_q_tbl[number].upper_base_addr);
+ pm8001_mw32(address, offset + OB_BASE_ADDR_LO_OFFSET,
+ pm8001_ha->outbnd_q_tbl[number].lower_base_addr);
+ pm8001_mw32(address, offset + OB_PI_BASE_ADDR_HI_OFFSET,
+ pm8001_ha->outbnd_q_tbl[number].pi_upper_base_addr);
+ pm8001_mw32(address, offset + OB_PI_BASE_ADDR_LO_OFFSET,
+ pm8001_ha->outbnd_q_tbl[number].pi_lower_base_addr);
+ pm8001_mw32(address, offset + OB_INTERRUPT_COALES_OFFSET,
+ pm8001_ha->outbnd_q_tbl[number].interrup_vec_cnt_delay);
+
+ pm8001_dbg(pm8001_ha, DEV,
+ "OQ %d: Element pri size 0x%x\n",
+ number,
+ pm8001_ha->outbnd_q_tbl[number].element_size_cnt);
+
+ pm8001_dbg(pm8001_ha, DEV,
+ "OQ upr base addr 0x%x OQ lwr base addr 0x%x\n",
+ pm8001_ha->outbnd_q_tbl[number].upper_base_addr,
+ pm8001_ha->outbnd_q_tbl[number].lower_base_addr);
+
+ pm8001_dbg(pm8001_ha, DEV,
+ "PI upper base addr 0x%x PI lower base addr 0x%x\n",
+ pm8001_ha->outbnd_q_tbl[number].pi_upper_base_addr,
+ pm8001_ha->outbnd_q_tbl[number].pi_lower_base_addr);
+}
+
+/**
+ * mpi_init_check - check firmware initialization status.
+ * @pm8001_ha: our hba card information
+ */
+static int mpi_init_check(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 max_wait_count;
+ u32 value;
+ u32 gst_len_mpistate;
+
+ /* Write bit0=1 to Inbound DoorBell Register to tell the SPC FW the
+ table is updated */
+ pm8001_cw32(pm8001_ha, 0, MSGU_IBDB_SET, SPCv_MSGU_CFG_TABLE_UPDATE);
+ /* wait until Inbound DoorBell Clear Register toggled */
+ if (IS_SPCV_12G(pm8001_ha->pdev)) {
+ max_wait_count = SPCV_DOORBELL_CLEAR_TIMEOUT;
+ } else {
+ max_wait_count = SPC_DOORBELL_CLEAR_TIMEOUT;
+ }
+ do {
+ msleep(FW_READY_INTERVAL);
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_IBDB_SET);
+ value &= SPCv_MSGU_CFG_TABLE_UPDATE;
+ } while ((value != 0) && (--max_wait_count));
+
+ if (!max_wait_count) {
+ /* additional check */
+ pm8001_dbg(pm8001_ha, FAIL,
+ "Inb doorbell clear not toggled[value:%x]\n",
+ value);
+ return -EBUSY;
+ }
+ /* check the MPI-State for initialization up to 100ms*/
+ max_wait_count = 5;/* 100 msec */
+ do {
+ msleep(FW_READY_INTERVAL);
+ gst_len_mpistate =
+ pm8001_mr32(pm8001_ha->general_stat_tbl_addr,
+ GST_GSTLEN_MPIS_OFFSET);
+ } while ((GST_MPI_STATE_INIT !=
+ (gst_len_mpistate & GST_MPI_STATE_MASK)) && (--max_wait_count));
+ if (!max_wait_count)
+ return -EBUSY;
+
+ /* check MPI Initialization error */
+ gst_len_mpistate = gst_len_mpistate >> 16;
+ if (0x0000 != gst_len_mpistate)
+ return -EBUSY;
+
+ /*
+ * As per controller datasheet, after successful MPI
+ * initialization minimum 500ms delay is required before
+ * issuing commands.
+ */
+ msleep(500);
+
+ return 0;
+}
+
+/**
+ * check_fw_ready - The LLDD check if the FW is ready, if not, return error.
+ * This function sleeps hence it must not be used in atomic context.
+ * @pm8001_ha: our hba card information
+ */
+static int check_fw_ready(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 value;
+ u32 max_wait_count;
+ u32 max_wait_time;
+ u32 expected_mask;
+ int ret = 0;
+
+ /* reset / PCIe ready */
+ max_wait_time = max_wait_count = 5; /* 100 milli sec */
+ do {
+ msleep(FW_READY_INTERVAL);
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+ } while ((value == 0xFFFFFFFF) && (--max_wait_count));
+
+ /* check ila, RAAE and iops status */
+ if ((pm8001_ha->chip_id != chip_8008) &&
+ (pm8001_ha->chip_id != chip_8009)) {
+ max_wait_time = max_wait_count = 180; /* 3600 milli sec */
+ expected_mask = SCRATCH_PAD_ILA_READY |
+ SCRATCH_PAD_RAAE_READY |
+ SCRATCH_PAD_IOP0_READY |
+ SCRATCH_PAD_IOP1_READY;
+ } else {
+ max_wait_time = max_wait_count = 170; /* 3400 milli sec */
+ expected_mask = SCRATCH_PAD_ILA_READY |
+ SCRATCH_PAD_RAAE_READY |
+ SCRATCH_PAD_IOP0_READY;
+ }
+ do {
+ msleep(FW_READY_INTERVAL);
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+ } while (((value & expected_mask) !=
+ expected_mask) && (--max_wait_count));
+ if (!max_wait_count) {
+ pm8001_dbg(pm8001_ha, INIT,
+ "At least one FW component failed to load within %d millisec: Scratchpad1: 0x%x\n",
+ max_wait_time * FW_READY_INTERVAL, value);
+ ret = -1;
+ } else {
+ pm8001_dbg(pm8001_ha, MSG,
+ "All FW components ready by %d ms\n",
+ (max_wait_time - max_wait_count) * FW_READY_INTERVAL);
+ }
+ return ret;
+}
+
+static int init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha)
+{
+ void __iomem *base_addr;
+ u32 value;
+ u32 offset;
+ u32 pcibar;
+ u32 pcilogic;
+
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0);
+
+ /*
+ * lower 26 bits of SCRATCHPAD0 register describes offset within the
+ * PCIe BAR where the MPI configuration table is present
+ */
+ offset = value & 0x03FFFFFF; /* scratch pad 0 TBL address */
+
+ pm8001_dbg(pm8001_ha, DEV, "Scratchpad 0 Offset: 0x%x value 0x%x\n",
+ offset, value);
+ /*
+ * Upper 6 bits describe the offset within PCI config space where BAR
+ * is located.
+ */
+ pcilogic = (value & 0xFC000000) >> 26;
+ pcibar = get_pci_bar_index(pcilogic);
+ pm8001_dbg(pm8001_ha, INIT, "Scratchpad 0 PCI BAR: %d\n", pcibar);
+
+ /*
+ * Make sure the offset falls inside the ioremapped PCI BAR
+ */
+ if (offset > pm8001_ha->io_mem[pcibar].memsize) {
+ pm8001_dbg(pm8001_ha, FAIL,
+ "Main cfg tbl offset outside %u > %u\n",
+ offset, pm8001_ha->io_mem[pcibar].memsize);
+ return -EBUSY;
+ }
+ pm8001_ha->main_cfg_tbl_addr = base_addr =
+ pm8001_ha->io_mem[pcibar].memvirtaddr + offset;
+
+ /*
+ * Validate main configuration table address: first DWord should read
+ * "PMCS"
+ */
+ value = pm8001_mr32(pm8001_ha->main_cfg_tbl_addr, 0);
+ if (memcmp(&value, "PMCS", 4) != 0) {
+ pm8001_dbg(pm8001_ha, FAIL,
+ "BAD main config signature 0x%x\n",
+ value);
+ return -EBUSY;
+ }
+ pm8001_dbg(pm8001_ha, INIT,
+ "VALID main config signature 0x%x\n", value);
+ pm8001_ha->general_stat_tbl_addr =
+ base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0x18) &
+ 0xFFFFFF);
+ pm8001_ha->inbnd_q_tbl_addr =
+ base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0x1C) &
+ 0xFFFFFF);
+ pm8001_ha->outbnd_q_tbl_addr =
+ base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0x20) &
+ 0xFFFFFF);
+ pm8001_ha->ivt_tbl_addr =
+ base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0x8C) &
+ 0xFFFFFF);
+ pm8001_ha->pspa_q_tbl_addr =
+ base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0x90) &
+ 0xFFFFFF);
+ pm8001_ha->fatal_tbl_addr =
+ base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0xA0) &
+ 0xFFFFFF);
+
+ pm8001_dbg(pm8001_ha, INIT, "GST OFFSET 0x%x\n",
+ pm8001_cr32(pm8001_ha, pcibar, offset + 0x18));
+ pm8001_dbg(pm8001_ha, INIT, "INBND OFFSET 0x%x\n",
+ pm8001_cr32(pm8001_ha, pcibar, offset + 0x1C));
+ pm8001_dbg(pm8001_ha, INIT, "OBND OFFSET 0x%x\n",
+ pm8001_cr32(pm8001_ha, pcibar, offset + 0x20));
+ pm8001_dbg(pm8001_ha, INIT, "IVT OFFSET 0x%x\n",
+ pm8001_cr32(pm8001_ha, pcibar, offset + 0x8C));
+ pm8001_dbg(pm8001_ha, INIT, "PSPA OFFSET 0x%x\n",
+ pm8001_cr32(pm8001_ha, pcibar, offset + 0x90));
+ pm8001_dbg(pm8001_ha, INIT, "addr - main cfg %p general status %p\n",
+ pm8001_ha->main_cfg_tbl_addr,
+ pm8001_ha->general_stat_tbl_addr);
+ pm8001_dbg(pm8001_ha, INIT, "addr - inbnd %p obnd %p\n",
+ pm8001_ha->inbnd_q_tbl_addr,
+ pm8001_ha->outbnd_q_tbl_addr);
+ pm8001_dbg(pm8001_ha, INIT, "addr - pspa %p ivt %p\n",
+ pm8001_ha->pspa_q_tbl_addr,
+ pm8001_ha->ivt_tbl_addr);
+ return 0;
+}
+
+/**
+ * pm80xx_set_thermal_config - support the thermal configuration
+ * @pm8001_ha: our hba card information.
+ */
+int
+pm80xx_set_thermal_config(struct pm8001_hba_info *pm8001_ha)
+{
+ struct set_ctrl_cfg_req payload;
+ int rc;
+ u32 tag;
+ u32 opc = OPC_INB_SET_CONTROLLER_CONFIG;
+ u32 page_code;
+
+ memset(&payload, 0, sizeof(struct set_ctrl_cfg_req));
+ rc = pm8001_tag_alloc(pm8001_ha, &tag);
+ if (rc)
+ return rc;
+
+ payload.tag = cpu_to_le32(tag);
+
+ if (IS_SPCV_12G(pm8001_ha->pdev))
+ page_code = THERMAL_PAGE_CODE_7H;
+ else
+ page_code = THERMAL_PAGE_CODE_8H;
+
+ payload.cfg_pg[0] =
+ cpu_to_le32((THERMAL_LOG_ENABLE << 9) |
+ (THERMAL_ENABLE << 8) | page_code);
+ payload.cfg_pg[1] =
+ cpu_to_le32((LTEMPHIL << 24) | (RTEMPHIL << 8));
+
+ pm8001_dbg(pm8001_ha, DEV,
+ "Setting up thermal config. cfg_pg 0 0x%x cfg_pg 1 0x%x\n",
+ payload.cfg_pg[0], payload.cfg_pg[1]);
+
+ rc = pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &payload,
+ sizeof(payload), 0);
+ if (rc)
+ pm8001_tag_free(pm8001_ha, tag);
+ return rc;
+
+}
+
+/**
+* pm80xx_set_sas_protocol_timer_config - support the SAS Protocol
+* Timer configuration page
+* @pm8001_ha: our hba card information.
+*/
+static int
+pm80xx_set_sas_protocol_timer_config(struct pm8001_hba_info *pm8001_ha)
+{
+ struct set_ctrl_cfg_req payload;
+ SASProtocolTimerConfig_t SASConfigPage;
+ int rc;
+ u32 tag;
+ u32 opc = OPC_INB_SET_CONTROLLER_CONFIG;
+
+ memset(&payload, 0, sizeof(struct set_ctrl_cfg_req));
+ memset(&SASConfigPage, 0, sizeof(SASProtocolTimerConfig_t));
+
+ rc = pm8001_tag_alloc(pm8001_ha, &tag);
+ if (rc)
+ return rc;
+
+ payload.tag = cpu_to_le32(tag);
+
+ SASConfigPage.pageCode = cpu_to_le32(SAS_PROTOCOL_TIMER_CONFIG_PAGE);
+ SASConfigPage.MST_MSI = cpu_to_le32(3 << 15);
+ SASConfigPage.STP_SSP_MCT_TMO =
+ cpu_to_le32((STP_MCT_TMO << 16) | SSP_MCT_TMO);
+ SASConfigPage.STP_FRM_TMO =
+ cpu_to_le32((SAS_MAX_OPEN_TIME << 24) |
+ (SMP_MAX_CONN_TIMER << 16) | STP_FRM_TIMER);
+ SASConfigPage.STP_IDLE_TMO = cpu_to_le32(STP_IDLE_TIME);
+
+ SASConfigPage.OPNRJT_RTRY_INTVL =
+ cpu_to_le32((SAS_MFD << 16) | SAS_OPNRJT_RTRY_INTVL);
+ SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO =
+ cpu_to_le32((SAS_DOPNRJT_RTRY_TMO << 16) | SAS_COPNRJT_RTRY_TMO);
+ SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR =
+ cpu_to_le32((SAS_DOPNRJT_RTRY_THR << 16) | SAS_COPNRJT_RTRY_THR);
+ SASConfigPage.MAX_AIP = cpu_to_le32(SAS_MAX_AIP);
+
+ pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.pageCode 0x%08x\n",
+ le32_to_cpu(SASConfigPage.pageCode));
+ pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.MST_MSI 0x%08x\n",
+ le32_to_cpu(SASConfigPage.MST_MSI));
+ pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.STP_SSP_MCT_TMO 0x%08x\n",
+ le32_to_cpu(SASConfigPage.STP_SSP_MCT_TMO));
+ pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.STP_FRM_TMO 0x%08x\n",
+ le32_to_cpu(SASConfigPage.STP_FRM_TMO));
+ pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.STP_IDLE_TMO 0x%08x\n",
+ le32_to_cpu(SASConfigPage.STP_IDLE_TMO));
+ pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.OPNRJT_RTRY_INTVL 0x%08x\n",
+ le32_to_cpu(SASConfigPage.OPNRJT_RTRY_INTVL));
+ pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO 0x%08x\n",
+ le32_to_cpu(SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO));
+ pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR 0x%08x\n",
+ le32_to_cpu(SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR));
+ pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.MAX_AIP 0x%08x\n",
+ le32_to_cpu(SASConfigPage.MAX_AIP));
+
+ memcpy(&payload.cfg_pg, &SASConfigPage,
+ sizeof(SASProtocolTimerConfig_t));
+
+ rc = pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &payload,
+ sizeof(payload), 0);
+ if (rc)
+ pm8001_tag_free(pm8001_ha, tag);
+
+ return rc;
+}
+
+/**
+ * pm80xx_get_encrypt_info - Check for encryption
+ * @pm8001_ha: our hba card information.
+ */
+static int
+pm80xx_get_encrypt_info(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 scratch3_value;
+ int ret = -1;
+
+ /* Read encryption status from SCRATCH PAD 3 */
+ scratch3_value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3);
+
+ if ((scratch3_value & SCRATCH_PAD3_ENC_MASK) ==
+ SCRATCH_PAD3_ENC_READY) {
+ if (scratch3_value & SCRATCH_PAD3_XTS_ENABLED)
+ pm8001_ha->encrypt_info.cipher_mode = CIPHER_MODE_XTS;
+ if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+ SCRATCH_PAD3_SMF_ENABLED)
+ pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMF;
+ if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+ SCRATCH_PAD3_SMA_ENABLED)
+ pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMA;
+ if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+ SCRATCH_PAD3_SMB_ENABLED)
+ pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMB;
+ pm8001_ha->encrypt_info.status = 0;
+ pm8001_dbg(pm8001_ha, INIT,
+ "Encryption: SCRATCH_PAD3_ENC_READY 0x%08X.Cipher mode 0x%x Sec mode 0x%x status 0x%x\n",
+ scratch3_value,
+ pm8001_ha->encrypt_info.cipher_mode,
+ pm8001_ha->encrypt_info.sec_mode,
+ pm8001_ha->encrypt_info.status);
+ ret = 0;
+ } else if ((scratch3_value & SCRATCH_PAD3_ENC_READY) ==
+ SCRATCH_PAD3_ENC_DISABLED) {
+ pm8001_dbg(pm8001_ha, INIT,
+ "Encryption: SCRATCH_PAD3_ENC_DISABLED 0x%08X\n",
+ scratch3_value);
+ pm8001_ha->encrypt_info.status = 0xFFFFFFFF;
+ pm8001_ha->encrypt_info.cipher_mode = 0;
+ pm8001_ha->encrypt_info.sec_mode = 0;
+ ret = 0;
+ } else if ((scratch3_value & SCRATCH_PAD3_ENC_MASK) ==
+ SCRATCH_PAD3_ENC_DIS_ERR) {
+ pm8001_ha->encrypt_info.status =
+ (scratch3_value & SCRATCH_PAD3_ERR_CODE) >> 16;
+ if (scratch3_value & SCRATCH_PAD3_XTS_ENABLED)
+ pm8001_ha->encrypt_info.cipher_mode = CIPHER_MODE_XTS;
+ if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+ SCRATCH_PAD3_SMF_ENABLED)
+ pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMF;
+ if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+ SCRATCH_PAD3_SMA_ENABLED)
+ pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMA;
+ if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+ SCRATCH_PAD3_SMB_ENABLED)
+ pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMB;
+ pm8001_dbg(pm8001_ha, INIT,
+ "Encryption: SCRATCH_PAD3_DIS_ERR 0x%08X.Cipher mode 0x%x sec mode 0x%x status 0x%x\n",
+ scratch3_value,
+ pm8001_ha->encrypt_info.cipher_mode,
+ pm8001_ha->encrypt_info.sec_mode,
+ pm8001_ha->encrypt_info.status);
+ } else if ((scratch3_value & SCRATCH_PAD3_ENC_MASK) ==
+ SCRATCH_PAD3_ENC_ENA_ERR) {
+
+ pm8001_ha->encrypt_info.status =
+ (scratch3_value & SCRATCH_PAD3_ERR_CODE) >> 16;
+ if (scratch3_value & SCRATCH_PAD3_XTS_ENABLED)
+ pm8001_ha->encrypt_info.cipher_mode = CIPHER_MODE_XTS;
+ if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+ SCRATCH_PAD3_SMF_ENABLED)
+ pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMF;
+ if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+ SCRATCH_PAD3_SMA_ENABLED)
+ pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMA;
+ if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
+ SCRATCH_PAD3_SMB_ENABLED)
+ pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMB;
+
+ pm8001_dbg(pm8001_ha, INIT,
+ "Encryption: SCRATCH_PAD3_ENA_ERR 0x%08X.Cipher mode 0x%x sec mode 0x%x status 0x%x\n",
+ scratch3_value,
+ pm8001_ha->encrypt_info.cipher_mode,
+ pm8001_ha->encrypt_info.sec_mode,
+ pm8001_ha->encrypt_info.status);
+ }
+ return ret;
+}
+
+/**
+ * pm80xx_encrypt_update - update flash with encryption information
+ * @pm8001_ha: our hba card information.
+ */
+static int pm80xx_encrypt_update(struct pm8001_hba_info *pm8001_ha)
+{
+ struct kek_mgmt_req payload;
+ int rc;
+ u32 tag;
+ u32 opc = OPC_INB_KEK_MANAGEMENT;
+
+ memset(&payload, 0, sizeof(struct kek_mgmt_req));
+ rc = pm8001_tag_alloc(pm8001_ha, &tag);
+ if (rc)
+ return rc;
+
+ payload.tag = cpu_to_le32(tag);
+ /* Currently only one key is used. New KEK index is 1.
+ * Current KEK index is 1. Store KEK to NVRAM is 1.
+ */
+ payload.new_curidx_ksop =
+ cpu_to_le32(((1 << 24) | (1 << 16) | (1 << 8) |
+ KEK_MGMT_SUBOP_KEYCARDUPDATE));
+
+ pm8001_dbg(pm8001_ha, DEV,
+ "Saving Encryption info to flash. payload 0x%x\n",
+ le32_to_cpu(payload.new_curidx_ksop));
+
+ rc = pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &payload,
+ sizeof(payload), 0);
+ if (rc)
+ pm8001_tag_free(pm8001_ha, tag);
+
+ return rc;
+}
+
+/**
+ * pm80xx_chip_init - the main init function that initializes whole PM8001 chip.
+ * @pm8001_ha: our hba card information
+ */
+static int pm80xx_chip_init(struct pm8001_hba_info *pm8001_ha)
+{
+ int ret;
+ u8 i = 0;
+
+ /* check the firmware status */
+ if (-1 == check_fw_ready(pm8001_ha)) {
+ pm8001_dbg(pm8001_ha, FAIL, "Firmware is not ready!\n");
+ return -EBUSY;
+ }
+
+ /* Initialize the controller fatal error flag */
+ pm8001_ha->controller_fatal_error = false;
+
+ /* Initialize pci space address eg: mpi offset */
+ ret = init_pci_device_addresses(pm8001_ha);
+ if (ret) {
+ pm8001_dbg(pm8001_ha, FAIL,
+ "Failed to init pci addresses");
+ return ret;
+ }
+ init_default_table_values(pm8001_ha);
+ read_main_config_table(pm8001_ha);
+ read_general_status_table(pm8001_ha);
+ read_inbnd_queue_table(pm8001_ha);
+ read_outbnd_queue_table(pm8001_ha);
+ read_phy_attr_table(pm8001_ha);
+
+ /* update main config table ,inbound table and outbound table */
+ update_main_config_table(pm8001_ha);
+ for (i = 0; i < pm8001_ha->max_q_num; i++) {
+ update_inbnd_queue_table(pm8001_ha, i);
+ update_outbnd_queue_table(pm8001_ha, i);
+ }
+ /* notify firmware update finished and check initialization status */
+ if (0 == mpi_init_check(pm8001_ha)) {
+ pm8001_dbg(pm8001_ha, INIT, "MPI initialize successful!\n");
+ } else
+ return -EBUSY;
+
+ return 0;
+}
+
+static void pm80xx_chip_post_init(struct pm8001_hba_info *pm8001_ha)
+{
+ /* send SAS protocol timer configuration page to FW */
+ pm80xx_set_sas_protocol_timer_config(pm8001_ha);
+
+ /* Check for encryption */
+ if (pm8001_ha->chip->encrypt) {
+ int ret;
+
+ pm8001_dbg(pm8001_ha, INIT, "Checking for encryption\n");
+ ret = pm80xx_get_encrypt_info(pm8001_ha);
+ if (ret == -1) {
+ pm8001_dbg(pm8001_ha, INIT, "Encryption error !!\n");
+ if (pm8001_ha->encrypt_info.status == 0x81) {
+ pm8001_dbg(pm8001_ha, INIT,
+ "Encryption enabled with error.Saving encryption key to flash\n");
+ pm80xx_encrypt_update(pm8001_ha);
+ }
+ }
+ }
+}
+
+static int mpi_uninit_check(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 max_wait_count;
+ u32 value;
+ u32 gst_len_mpistate;
+ int ret;
+
+ ret = init_pci_device_addresses(pm8001_ha);
+ if (ret) {
+ pm8001_dbg(pm8001_ha, FAIL,
+ "Failed to init pci addresses");
+ return ret;
+ }
+
+ /* Write bit1=1 to Inbound DoorBell Register to tell the SPC FW the
+ table is stop */
+ pm8001_cw32(pm8001_ha, 0, MSGU_IBDB_SET, SPCv_MSGU_CFG_TABLE_RESET);
+
+ /* wait until Inbound DoorBell Clear Register toggled */
+ if (IS_SPCV_12G(pm8001_ha->pdev)) {
+ max_wait_count = SPCV_DOORBELL_CLEAR_TIMEOUT;
+ } else {
+ max_wait_count = SPC_DOORBELL_CLEAR_TIMEOUT;
+ }
+ do {
+ msleep(FW_READY_INTERVAL);
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_IBDB_SET);
+ value &= SPCv_MSGU_CFG_TABLE_RESET;
+ } while ((value != 0) && (--max_wait_count));
+
+ if (!max_wait_count) {
+ pm8001_dbg(pm8001_ha, FAIL, "TIMEOUT:IBDB value/=%x\n", value);
+ return -1;
+ }
+
+ /* check the MPI-State for termination in progress */
+ /* wait until Inbound DoorBell Clear Register toggled */
+ max_wait_count = 100; /* 2 sec for spcv/ve */
+ do {
+ msleep(FW_READY_INTERVAL);
+ gst_len_mpistate =
+ pm8001_mr32(pm8001_ha->general_stat_tbl_addr,
+ GST_GSTLEN_MPIS_OFFSET);
+ if (GST_MPI_STATE_UNINIT ==
+ (gst_len_mpistate & GST_MPI_STATE_MASK))
+ break;
+ } while (--max_wait_count);
+ if (!max_wait_count) {
+ pm8001_dbg(pm8001_ha, FAIL, " TIME OUT MPI State = 0x%x\n",
+ gst_len_mpistate & GST_MPI_STATE_MASK);
+ return -1;
+ }
+
+ return 0;
+}
+
+/**
+ * pm80xx_fatal_errors - returns non-zero *ONLY* when fatal errors
+ * @pm8001_ha: our hba card information
+ *
+ * Fatal errors are recoverable only after a host reboot.
+ */
+int
+pm80xx_fatal_errors(struct pm8001_hba_info *pm8001_ha)
+{
+ int ret = 0;
+ u32 scratch_pad_rsvd0 = pm8001_cr32(pm8001_ha, 0,
+ MSGU_SCRATCH_PAD_RSVD_0);
+ u32 scratch_pad_rsvd1 = pm8001_cr32(pm8001_ha, 0,
+ MSGU_SCRATCH_PAD_RSVD_1);
+ u32 scratch_pad1 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+ u32 scratch_pad2 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2);
+ u32 scratch_pad3 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3);
+
+ if (pm8001_ha->chip_id != chip_8006 &&
+ pm8001_ha->chip_id != chip_8074 &&
+ pm8001_ha->chip_id != chip_8076) {
+ return 0;
+ }
+
+ if (MSGU_SCRATCHPAD1_STATE_FATAL_ERROR(scratch_pad1)) {
+ pm8001_dbg(pm8001_ha, FAIL,
+ "Fatal error SCRATCHPAD1 = 0x%x SCRATCHPAD2 = 0x%x SCRATCHPAD3 = 0x%x SCRATCHPAD_RSVD0 = 0x%x SCRATCHPAD_RSVD1 = 0x%x\n",
+ scratch_pad1, scratch_pad2, scratch_pad3,
+ scratch_pad_rsvd0, scratch_pad_rsvd1);
+ ret = 1;
+ }
+
+ return ret;
+}
+
+/**
+ * pm80xx_chip_soft_rst - soft reset the PM8001 chip, so that all
+ * FW register status are reset to the originated status.
+ * @pm8001_ha: our hba card information
+ */
+
+static int
+pm80xx_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 regval;
+ u32 bootloader_state;
+ u32 ibutton0, ibutton1;
+
+ /* Process MPI table uninitialization only if FW is ready */
+ if (!pm8001_ha->controller_fatal_error) {
+ /* Check if MPI is in ready state to reset */
+ if (mpi_uninit_check(pm8001_ha) != 0) {
+ u32 r0 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0);
+ u32 r1 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+ u32 r2 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2);
+ u32 r3 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3);
+ pm8001_dbg(pm8001_ha, FAIL,
+ "MPI state is not ready scratch: %x:%x:%x:%x\n",
+ r0, r1, r2, r3);
+ /* if things aren't ready but the bootloader is ok then
+ * try the reset anyway.
+ */
+ if (r1 & SCRATCH_PAD1_BOOTSTATE_MASK)
+ return -1;
+ }
+ }
+ /* checked for reset register normal state; 0x0 */
+ regval = pm8001_cr32(pm8001_ha, 0, SPC_REG_SOFT_RESET);
+ pm8001_dbg(pm8001_ha, INIT, "reset register before write : 0x%x\n",
+ regval);
+
+ pm8001_cw32(pm8001_ha, 0, SPC_REG_SOFT_RESET, SPCv_NORMAL_RESET_VALUE);
+ msleep(500);
+
+ regval = pm8001_cr32(pm8001_ha, 0, SPC_REG_SOFT_RESET);
+ pm8001_dbg(pm8001_ha, INIT, "reset register after write 0x%x\n",
+ regval);
+
+ if ((regval & SPCv_SOFT_RESET_READ_MASK) ==
+ SPCv_SOFT_RESET_NORMAL_RESET_OCCURED) {
+ pm8001_dbg(pm8001_ha, MSG,
+ " soft reset successful [regval: 0x%x]\n",
+ regval);
+ } else {
+ pm8001_dbg(pm8001_ha, MSG,
+ " soft reset failed [regval: 0x%x]\n",
+ regval);
+
+ /* check bootloader is successfully executed or in HDA mode */
+ bootloader_state =
+ pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1) &
+ SCRATCH_PAD1_BOOTSTATE_MASK;
+
+ if (bootloader_state == SCRATCH_PAD1_BOOTSTATE_HDA_SEEPROM) {
+ pm8001_dbg(pm8001_ha, MSG,
+ "Bootloader state - HDA mode SEEPROM\n");
+ } else if (bootloader_state ==
+ SCRATCH_PAD1_BOOTSTATE_HDA_BOOTSTRAP) {
+ pm8001_dbg(pm8001_ha, MSG,
+ "Bootloader state - HDA mode Bootstrap Pin\n");
+ } else if (bootloader_state ==
+ SCRATCH_PAD1_BOOTSTATE_HDA_SOFTRESET) {
+ pm8001_dbg(pm8001_ha, MSG,
+ "Bootloader state - HDA mode soft reset\n");
+ } else if (bootloader_state ==
+ SCRATCH_PAD1_BOOTSTATE_CRIT_ERROR) {
+ pm8001_dbg(pm8001_ha, MSG,
+ "Bootloader state-HDA mode critical error\n");
+ }
+ return -EBUSY;
+ }
+
+ /* check the firmware status after reset */
+ if (-1 == check_fw_ready(pm8001_ha)) {
+ pm8001_dbg(pm8001_ha, FAIL, "Firmware is not ready!\n");
+ /* check iButton feature support for motherboard controller */
+ if (pm8001_ha->pdev->subsystem_vendor !=
+ PCI_VENDOR_ID_ADAPTEC2 &&
+ pm8001_ha->pdev->subsystem_vendor !=
+ PCI_VENDOR_ID_ATTO &&
+ pm8001_ha->pdev->subsystem_vendor != 0) {
+ ibutton0 = pm8001_cr32(pm8001_ha, 0,
+ MSGU_SCRATCH_PAD_RSVD_0);
+ ibutton1 = pm8001_cr32(pm8001_ha, 0,
+ MSGU_SCRATCH_PAD_RSVD_1);
+ if (!ibutton0 && !ibutton1) {
+ pm8001_dbg(pm8001_ha, FAIL,
+ "iButton Feature is not Available!!!\n");
+ return -EBUSY;
+ }
+ if (ibutton0 == 0xdeadbeef && ibutton1 == 0xdeadbeef) {
+ pm8001_dbg(pm8001_ha, FAIL,
+ "CRC Check for iButton Feature Failed!!!\n");
+ return -EBUSY;
+ }
+ }
+ }
+ pm8001_dbg(pm8001_ha, INIT, "SPCv soft reset Complete\n");
+ return 0;
+}
+
+static void pm80xx_hw_chip_rst(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 i;
+
+ pm8001_dbg(pm8001_ha, INIT, "chip reset start\n");
+
+ /* do SPCv chip reset. */
+ pm8001_cw32(pm8001_ha, 0, SPC_REG_SOFT_RESET, 0x11);
+ pm8001_dbg(pm8001_ha, INIT, "SPC soft reset Complete\n");
+
+ /* Check this ..whether delay is required or no */
+ /* delay 10 usec */
+ udelay(10);
+
+ /* wait for 20 msec until the firmware gets reloaded */
+ i = 20;
+ do {
+ mdelay(1);
+ } while ((--i) != 0);
+
+ pm8001_dbg(pm8001_ha, INIT, "chip reset finished\n");
+}
+
+/**
+ * pm80xx_chip_intx_interrupt_enable - enable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
+static void
+pm80xx_chip_intx_interrupt_enable(struct pm8001_hba_info *pm8001_ha)
+{
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_CLEAR_ALL);
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, ODCR_CLEAR_ALL);
+}
+
+/**
+ * pm80xx_chip_intx_interrupt_disable - disable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
+static void
+pm80xx_chip_intx_interrupt_disable(struct pm8001_hba_info *pm8001_ha)
+{
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_CLR, ODMR_MASK_ALL);
+}
+
+/**
+ * pm80xx_chip_interrupt_enable - enable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ * @vec: interrupt number to enable
+ */
+static void
+pm80xx_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec)
+{
+#ifdef PM8001_USE_MSIX
+ if (vec < 32)
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_CLR, 1U << vec);
+ else
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_CLR_U,
+ 1U << (vec - 32));
+ return;
+#endif
+ pm80xx_chip_intx_interrupt_enable(pm8001_ha);
+
+}
+
+/**
+ * pm80xx_chip_interrupt_disable - disable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ * @vec: interrupt number to disable
+ */
+static void
+pm80xx_chip_interrupt_disable(struct pm8001_hba_info *pm8001_ha, u8 vec)
+{
+#ifdef PM8001_USE_MSIX
+ if (vec == 0xFF) {
+ /* disable all vectors 0-31, 32-63 */
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, 0xFFFFFFFF);
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_U, 0xFFFFFFFF);
+ } else if (vec < 32)
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, 1U << vec);
+ else
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_U,
+ 1U << (vec - 32));
+ return;
+#endif
+ pm80xx_chip_intx_interrupt_disable(pm8001_ha);
+}
+
+/**
+ * mpi_ssp_completion - process the event that FW response to the SSP request.
+ * @pm8001_ha: our hba card information
+ * @piomb: the message contents of this outbound message.
+ *
+ * When FW has completed a ssp request for example a IO request, after it has
+ * filled the SG data with the data, it will trigger this event representing
+ * that he has finished the job; please check the corresponding buffer.
+ * So we will tell the caller who maybe waiting the result to tell upper layer
+ * that the task has been finished.
+ */
+static void
+mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct sas_task *t;
+ struct pm8001_ccb_info *ccb;
+ unsigned long flags;
+ u32 status;
+ u32 param;
+ u32 tag;
+ struct ssp_completion_resp *psspPayload;
+ struct task_status_struct *ts;
+ struct ssp_response_iu *iu;
+ struct pm8001_device *pm8001_dev;
+ psspPayload = (struct ssp_completion_resp *)(piomb + 4);
+ status = le32_to_cpu(psspPayload->status);
+ tag = le32_to_cpu(psspPayload->tag);
+ ccb = &pm8001_ha->ccb_info[tag];
+ if ((status == IO_ABORTED) && ccb->open_retry) {
+ /* Being completed by another */
+ ccb->open_retry = 0;
+ return;
+ }
+ pm8001_dev = ccb->device;
+ param = le32_to_cpu(psspPayload->param);
+ t = ccb->task;
+
+ if (status && status != IO_UNDERFLOW)
+ pm8001_dbg(pm8001_ha, FAIL, "sas IO status 0x%x\n", status);
+ if (unlikely(!t || !t->lldd_task || !t->dev))
+ return;
+ ts = &t->task_status;
+
+ pm8001_dbg(pm8001_ha, DEV,
+ "tag::0x%x, status::0x%x task::0x%p\n", tag, status, t);
+
+ /* Print sas address of IO failed device */
+ if ((status != IO_SUCCESS) && (status != IO_OVERFLOW) &&
+ (status != IO_UNDERFLOW))
+ pm8001_dbg(pm8001_ha, FAIL, "SAS Address of IO Failure Drive:%016llx\n",
+ SAS_ADDR(t->dev->sas_addr));
+
+ switch (status) {
+ case IO_SUCCESS:
+ pm8001_dbg(pm8001_ha, IO, "IO_SUCCESS ,param = 0x%x\n",
+ param);
+ if (param == 0) {
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_SAM_STAT_GOOD;
+ } else {
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_PROTO_RESPONSE;
+ ts->residual = param;
+ iu = &psspPayload->ssp_resp_iu;
+ sas_ssp_task_response(pm8001_ha->dev, t, iu);
+ }
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_ABORTED:
+ pm8001_dbg(pm8001_ha, IO, "IO_ABORTED IOMB Tag\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_ABORTED_TASK;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_UNDERFLOW:
+ /* SSP Completion with error */
+ pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW ,param = 0x%x\n",
+ param);
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_UNDERRUN;
+ ts->residual = param;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_NO_DEVICE:
+ pm8001_dbg(pm8001_ha, IO, "IO_NO_DEVICE\n");
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_PHY_DOWN;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_XFER_ERROR_BREAK:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ /* Force the midlayer to retry */
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_XFER_ERROR_PHY_NOT_READY:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_XFER_ERROR_INVALID_SSP_RSP_FRAME:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_XFER_ERROR_INVALID_SSP_RSP_FRAME\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_EPROTO;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_OPEN_CNX_ERROR_BREAK:
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+ case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ if (!t->uldd_task)
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+ break;
+ case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n");
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_XFER_ERROR_NAK_RECEIVED:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_NAK_RECEIVED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_ACK_NAK_TIMEOUT\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_NAK_R_ERR;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_XFER_ERROR_DMA:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_DMA\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_XFER_OPEN_RETRY_TIMEOUT:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_XFER_ERROR_OFFSET_MISMATCH:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_OFFSET_MISMATCH\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_PORT_IN_RESET:
+ pm8001_dbg(pm8001_ha, IO, "IO_PORT_IN_RESET\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_DS_NON_OPERATIONAL:
+ pm8001_dbg(pm8001_ha, IO, "IO_DS_NON_OPERATIONAL\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ if (!t->uldd_task)
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_DS_NON_OPERATIONAL);
+ break;
+ case IO_DS_IN_RECOVERY:
+ pm8001_dbg(pm8001_ha, IO, "IO_DS_IN_RECOVERY\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_TM_TAG_NOT_FOUND:
+ pm8001_dbg(pm8001_ha, IO, "IO_TM_TAG_NOT_FOUND\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_SSP_EXT_IU_ZERO_LEN_ERROR:
+ pm8001_dbg(pm8001_ha, IO, "IO_SSP_EXT_IU_ZERO_LEN_ERROR\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ default:
+ pm8001_dbg(pm8001_ha, DEVIO, "Unknown status 0x%x\n", status);
+ /* not allowed case. Therefore, return failed status */
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ }
+ pm8001_dbg(pm8001_ha, IO, "scsi_status = 0x%x\n ",
+ psspPayload->ssp_resp_iu.status);
+ spin_lock_irqsave(&t->task_state_lock, flags);
+ t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ t->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_dbg(pm8001_ha, FAIL,
+ "task 0x%p done with io_status 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
+ t, status, ts->resp, ts->stat);
+ pm8001_ccb_task_free(pm8001_ha, ccb);
+ if (t->slow_task)
+ complete(&t->slow_task->completion);
+ } else {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_ccb_task_free_done(pm8001_ha, ccb);
+ }
+}
+
+/*See the comments for mpi_ssp_completion */
+static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct sas_task *t;
+ unsigned long flags;
+ struct task_status_struct *ts;
+ struct pm8001_ccb_info *ccb;
+ struct pm8001_device *pm8001_dev;
+ struct ssp_event_resp *psspPayload =
+ (struct ssp_event_resp *)(piomb + 4);
+ u32 event = le32_to_cpu(psspPayload->event);
+ u32 tag = le32_to_cpu(psspPayload->tag);
+ u32 port_id = le32_to_cpu(psspPayload->port_id);
+
+ ccb = &pm8001_ha->ccb_info[tag];
+ t = ccb->task;
+ pm8001_dev = ccb->device;
+ if (event)
+ pm8001_dbg(pm8001_ha, FAIL, "sas IO status 0x%x\n", event);
+ if (unlikely(!t || !t->lldd_task || !t->dev))
+ return;
+ ts = &t->task_status;
+ pm8001_dbg(pm8001_ha, IOERR, "port_id:0x%x, tag:0x%x, event:0x%x\n",
+ port_id, tag, event);
+ switch (event) {
+ case IO_OVERFLOW:
+ pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ ts->residual = 0;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_XFER_ERROR_BREAK:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
+ pm8001_handle_event(pm8001_ha, t, IO_XFER_ERROR_BREAK);
+ return;
+ case IO_XFER_ERROR_PHY_NOT_READY:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_EPROTO;
+ break;
+ case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ break;
+ case IO_OPEN_CNX_ERROR_BREAK:
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+ case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ if (!t->uldd_task)
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+ break;
+ case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+ break;
+ case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+ break;
+ case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+ break;
+ case IO_XFER_ERROR_NAK_RECEIVED:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_NAK_RECEIVED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_ACK_NAK_TIMEOUT\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_NAK_R_ERR;
+ break;
+ case IO_XFER_OPEN_RETRY_TIMEOUT:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
+ pm8001_handle_event(pm8001_ha, t, IO_XFER_OPEN_RETRY_TIMEOUT);
+ return;
+ case IO_XFER_ERROR_UNEXPECTED_PHASE:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_UNEXPECTED_PHASE\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_ERROR_XFER_RDY_OVERRUN:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_XFER_RDY_OVERRUN\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_ERROR_OFFSET_MISMATCH:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_OFFSET_MISMATCH\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_ERROR_XFER_ZERO_DATA_LEN:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_ERROR_INTERNAL_CRC_ERROR:
+ pm8001_dbg(pm8001_ha, IOERR,
+ "IO_XFR_ERROR_INTERNAL_CRC_ERROR\n");
+ /* TBC: used default set values */
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_CMD_FRAME_ISSUED:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_CMD_FRAME_ISSUED\n");
+ return;
+ default:
+ pm8001_dbg(pm8001_ha, DEVIO, "Unknown status 0x%x\n", event);
+ /* not allowed case. Therefore, return failed status */
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ }
+ spin_lock_irqsave(&t->task_state_lock, flags);
+ t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ t->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_dbg(pm8001_ha, FAIL,
+ "task 0x%p done with event 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
+ t, event, ts->resp, ts->stat);
+ pm8001_ccb_task_free(pm8001_ha, ccb);
+ } else {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_ccb_task_free_done(pm8001_ha, ccb);
+ }
+}
+
+/*See the comments for mpi_ssp_completion */
+static void
+mpi_sata_completion(struct pm8001_hba_info *pm8001_ha,
+ struct outbound_queue_table *circularQ, void *piomb)
+{
+ struct sas_task *t;
+ struct pm8001_ccb_info *ccb;
+ u32 param;
+ u32 status;
+ u32 tag;
+ int i, j;
+ u8 sata_addr_low[4];
+ u32 temp_sata_addr_low, temp_sata_addr_hi;
+ u8 sata_addr_hi[4];
+ struct sata_completion_resp *psataPayload;
+ struct task_status_struct *ts;
+ struct ata_task_resp *resp ;
+ u32 *sata_resp;
+ struct pm8001_device *pm8001_dev;
+ unsigned long flags;
+
+ psataPayload = (struct sata_completion_resp *)(piomb + 4);
+ status = le32_to_cpu(psataPayload->status);
+ param = le32_to_cpu(psataPayload->param);
+ tag = le32_to_cpu(psataPayload->tag);
+
+ ccb = &pm8001_ha->ccb_info[tag];
+ t = ccb->task;
+ pm8001_dev = ccb->device;
+
+ if (t) {
+ if (t->dev && (t->dev->lldd_dev))
+ pm8001_dev = t->dev->lldd_dev;
+ } else {
+ pm8001_dbg(pm8001_ha, FAIL, "task null, freeing CCB tag %d\n",
+ ccb->ccb_tag);
+ pm8001_ccb_free(pm8001_ha, ccb);
+ return;
+ }
+
+
+ if (pm8001_dev && unlikely(!t->lldd_task || !t->dev))
+ return;
+
+ ts = &t->task_status;
+
+ if (status != IO_SUCCESS) {
+ pm8001_dbg(pm8001_ha, FAIL,
+ "IO failed device_id %u status 0x%x tag %d\n",
+ pm8001_dev->device_id, status, tag);
+ }
+
+ /* Print sas address of IO failed device */
+ if ((status != IO_SUCCESS) && (status != IO_OVERFLOW) &&
+ (status != IO_UNDERFLOW)) {
+ if (!((t->dev->parent) &&
+ (dev_is_expander(t->dev->parent->dev_type)))) {
+ for (i = 0, j = 4; i <= 3 && j <= 7; i++, j++)
+ sata_addr_low[i] = pm8001_ha->sas_addr[j];
+ for (i = 0, j = 0; i <= 3 && j <= 3; i++, j++)
+ sata_addr_hi[i] = pm8001_ha->sas_addr[j];
+ memcpy(&temp_sata_addr_low, sata_addr_low,
+ sizeof(sata_addr_low));
+ memcpy(&temp_sata_addr_hi, sata_addr_hi,
+ sizeof(sata_addr_hi));
+ temp_sata_addr_hi = (((temp_sata_addr_hi >> 24) & 0xff)
+ |((temp_sata_addr_hi << 8) &
+ 0xff0000) |
+ ((temp_sata_addr_hi >> 8)
+ & 0xff00) |
+ ((temp_sata_addr_hi << 24) &
+ 0xff000000));
+ temp_sata_addr_low = ((((temp_sata_addr_low >> 24)
+ & 0xff) |
+ ((temp_sata_addr_low << 8)
+ & 0xff0000) |
+ ((temp_sata_addr_low >> 8)
+ & 0xff00) |
+ ((temp_sata_addr_low << 24)
+ & 0xff000000)) +
+ pm8001_dev->attached_phy +
+ 0x10);
+ pm8001_dbg(pm8001_ha, FAIL,
+ "SAS Address of IO Failure Drive:%08x%08x\n",
+ temp_sata_addr_hi,
+ temp_sata_addr_low);
+
+ } else {
+ pm8001_dbg(pm8001_ha, FAIL,
+ "SAS Address of IO Failure Drive:%016llx\n",
+ SAS_ADDR(t->dev->sas_addr));
+ }
+ }
+ switch (status) {
+ case IO_SUCCESS:
+ pm8001_dbg(pm8001_ha, IO, "IO_SUCCESS\n");
+ if (param == 0) {
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_SAM_STAT_GOOD;
+ } else {
+ u8 len;
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_PROTO_RESPONSE;
+ ts->residual = param;
+ pm8001_dbg(pm8001_ha, IO,
+ "SAS_PROTO_RESPONSE len = %d\n",
+ param);
+ sata_resp = &psataPayload->sata_resp[0];
+ resp = (struct ata_task_resp *)ts->buf;
+ if (t->ata_task.dma_xfer == 0 &&
+ t->data_dir == DMA_FROM_DEVICE) {
+ len = sizeof(struct pio_setup_fis);
+ pm8001_dbg(pm8001_ha, IO,
+ "PIO read len = %d\n", len);
+ } else if (t->ata_task.use_ncq &&
+ t->data_dir != DMA_NONE) {
+ len = sizeof(struct set_dev_bits_fis);
+ pm8001_dbg(pm8001_ha, IO, "FPDMA len = %d\n",
+ len);
+ } else {
+ len = sizeof(struct dev_to_host_fis);
+ pm8001_dbg(pm8001_ha, IO, "other len = %d\n",
+ len);
+ }
+ if (SAS_STATUS_BUF_SIZE >= sizeof(*resp)) {
+ resp->frame_len = len;
+ memcpy(&resp->ending_fis[0], sata_resp, len);
+ ts->buf_valid_size = sizeof(*resp);
+ } else
+ pm8001_dbg(pm8001_ha, IO,
+ "response too large\n");
+ }
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_ABORTED:
+ pm8001_dbg(pm8001_ha, IO, "IO_ABORTED IOMB Tag\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_ABORTED_TASK;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ /* following cases are to do cases */
+ case IO_UNDERFLOW:
+ /* SATA Completion with error */
+ pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW param = %d\n", param);
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_UNDERRUN;
+ ts->residual = param;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_NO_DEVICE:
+ pm8001_dbg(pm8001_ha, IO, "IO_NO_DEVICE\n");
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_PHY_DOWN;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_XFER_ERROR_BREAK:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_INTERRUPTED;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_XFER_ERROR_PHY_NOT_READY:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_EPROTO;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_OPEN_CNX_ERROR_BREAK:
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+ case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (!t->uldd_task) {
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_QUEUE_FULL;
+ spin_unlock_irqrestore(&circularQ->oq_lock,
+ circularQ->lock_flags);
+ pm8001_ccb_task_free_done(pm8001_ha, ccb);
+ spin_lock_irqsave(&circularQ->oq_lock,
+ circularQ->lock_flags);
+ return;
+ }
+ break;
+ case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n");
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+ if (!t->uldd_task) {
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_QUEUE_FULL;
+ spin_unlock_irqrestore(&circularQ->oq_lock,
+ circularQ->lock_flags);
+ pm8001_ccb_task_free_done(pm8001_ha, ccb);
+ spin_lock_irqsave(&circularQ->oq_lock,
+ circularQ->lock_flags);
+ return;
+ }
+ break;
+ case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (!t->uldd_task) {
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY);
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_QUEUE_FULL;
+ spin_unlock_irqrestore(&circularQ->oq_lock,
+ circularQ->lock_flags);
+ pm8001_ccb_task_free_done(pm8001_ha, ccb);
+ spin_lock_irqsave(&circularQ->oq_lock,
+ circularQ->lock_flags);
+ return;
+ }
+ break;
+ case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_XFER_ERROR_NAK_RECEIVED:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_NAK_RECEIVED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_NAK_R_ERR;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_ACK_NAK_TIMEOUT\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_NAK_R_ERR;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_XFER_ERROR_DMA:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_DMA\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_ABORTED_TASK;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_XFER_ERROR_SATA_LINK_TIMEOUT:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_SATA_LINK_TIMEOUT\n");
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_XFER_ERROR_REJECTED_NCQ_MODE:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_REJECTED_NCQ_MODE\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_UNDERRUN;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_XFER_OPEN_RETRY_TIMEOUT:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_PORT_IN_RESET:
+ pm8001_dbg(pm8001_ha, IO, "IO_PORT_IN_RESET\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_DS_NON_OPERATIONAL:
+ pm8001_dbg(pm8001_ha, IO, "IO_DS_NON_OPERATIONAL\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (!t->uldd_task) {
+ pm8001_handle_event(pm8001_ha, pm8001_dev,
+ IO_DS_NON_OPERATIONAL);
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_QUEUE_FULL;
+ spin_unlock_irqrestore(&circularQ->oq_lock,
+ circularQ->lock_flags);
+ pm8001_ccb_task_free_done(pm8001_ha, ccb);
+ spin_lock_irqsave(&circularQ->oq_lock,
+ circularQ->lock_flags);
+ return;
+ }
+ break;
+ case IO_DS_IN_RECOVERY:
+ pm8001_dbg(pm8001_ha, IO, "IO_DS_IN_RECOVERY\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_DS_IN_ERROR:
+ pm8001_dbg(pm8001_ha, IO, "IO_DS_IN_ERROR\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (!t->uldd_task) {
+ pm8001_handle_event(pm8001_ha, pm8001_dev,
+ IO_DS_IN_ERROR);
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_QUEUE_FULL;
+ spin_unlock_irqrestore(&circularQ->oq_lock,
+ circularQ->lock_flags);
+ pm8001_ccb_task_free_done(pm8001_ha, ccb);
+ spin_lock_irqsave(&circularQ->oq_lock,
+ circularQ->lock_flags);
+ return;
+ }
+ break;
+ case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ default:
+ pm8001_dbg(pm8001_ha, DEVIO,
+ "Unknown status device_id %u status 0x%x tag %d\n",
+ pm8001_dev->device_id, status, tag);
+ /* not allowed case. Therefore, return failed status */
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ }
+ spin_lock_irqsave(&t->task_state_lock, flags);
+ t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ t->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_dbg(pm8001_ha, FAIL,
+ "task 0x%p done with io_status 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
+ t, status, ts->resp, ts->stat);
+ pm8001_ccb_task_free(pm8001_ha, ccb);
+ if (t->slow_task)
+ complete(&t->slow_task->completion);
+ } else {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ spin_unlock_irqrestore(&circularQ->oq_lock,
+ circularQ->lock_flags);
+ pm8001_ccb_task_free_done(pm8001_ha, ccb);
+ spin_lock_irqsave(&circularQ->oq_lock,
+ circularQ->lock_flags);
+ }
+}
+
+/*See the comments for mpi_ssp_completion */
+static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha,
+ struct outbound_queue_table *circularQ, void *piomb)
+{
+ struct sas_task *t;
+ struct task_status_struct *ts;
+ struct pm8001_ccb_info *ccb;
+ struct pm8001_device *pm8001_dev;
+ struct sata_event_resp *psataPayload =
+ (struct sata_event_resp *)(piomb + 4);
+ u32 event = le32_to_cpu(psataPayload->event);
+ u32 tag = le32_to_cpu(psataPayload->tag);
+ u32 port_id = le32_to_cpu(psataPayload->port_id);
+ u32 dev_id = le32_to_cpu(psataPayload->device_id);
+
+ if (event)
+ pm8001_dbg(pm8001_ha, FAIL, "SATA EVENT 0x%x\n", event);
+
+ /* Check if this is NCQ error */
+ if (event == IO_XFER_ERROR_ABORTED_NCQ_MODE) {
+ /* find device using device id */
+ pm8001_dev = pm8001_find_dev(pm8001_ha, dev_id);
+ /* send read log extension by aborting the link - libata does what we want */
+ if (pm8001_dev)
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_XFER_ERROR_ABORTED_NCQ_MODE);
+ return;
+ }
+
+ ccb = &pm8001_ha->ccb_info[tag];
+ t = ccb->task;
+ pm8001_dev = ccb->device;
+ if (unlikely(!t)) {
+ pm8001_dbg(pm8001_ha, FAIL, "task null, freeing CCB tag %d\n",
+ ccb->ccb_tag);
+ pm8001_ccb_free(pm8001_ha, ccb);
+ return;
+ }
+
+ if (unlikely(!t->lldd_task || !t->dev))
+ return;
+
+ ts = &t->task_status;
+ pm8001_dbg(pm8001_ha, IOERR, "port_id:0x%x, tag:0x%x, event:0x%x\n",
+ port_id, tag, event);
+ switch (event) {
+ case IO_OVERFLOW:
+ pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ ts->residual = 0;
+ break;
+ case IO_XFER_ERROR_BREAK:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_INTERRUPTED;
+ break;
+ case IO_XFER_ERROR_PHY_NOT_READY:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_EPROTO;
+ break;
+ case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ break;
+ case IO_OPEN_CNX_ERROR_BREAK:
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
+ break;
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+ case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
+ pm8001_dbg(pm8001_ha, FAIL,
+ "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n");
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (!t->uldd_task) {
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_QUEUE_FULL;
+ return;
+ }
+ break;
+ case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n");
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+ break;
+ case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+ break;
+ case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+ break;
+ case IO_XFER_ERROR_NAK_RECEIVED:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_NAK_RECEIVED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_NAK_R_ERR;
+ break;
+ case IO_XFER_ERROR_PEER_ABORTED:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PEER_ABORTED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_NAK_R_ERR;
+ break;
+ case IO_XFER_ERROR_REJECTED_NCQ_MODE:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_REJECTED_NCQ_MODE\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_UNDERRUN;
+ break;
+ case IO_XFER_OPEN_RETRY_TIMEOUT:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_ERROR_UNEXPECTED_PHASE:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_UNEXPECTED_PHASE\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_ERROR_XFER_RDY_OVERRUN:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_XFER_RDY_OVERRUN\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_ERROR_OFFSET_MISMATCH:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_OFFSET_MISMATCH\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_ERROR_XFER_ZERO_DATA_LEN:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_CMD_FRAME_ISSUED:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_CMD_FRAME_ISSUED\n");
+ break;
+ case IO_XFER_PIO_SETUP_ERROR:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_PIO_SETUP_ERROR\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_ERROR_INTERNAL_CRC_ERROR:
+ pm8001_dbg(pm8001_ha, FAIL,
+ "IO_XFR_ERROR_INTERNAL_CRC_ERROR\n");
+ /* TBC: used default set values */
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_DMA_ACTIVATE_TIMEOUT:
+ pm8001_dbg(pm8001_ha, FAIL, "IO_XFR_DMA_ACTIVATE_TIMEOUT\n");
+ /* TBC: used default set values */
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ default:
+ pm8001_dbg(pm8001_ha, IO, "Unknown status 0x%x\n", event);
+ /* not allowed case. Therefore, return failed status */
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ }
+}
+
+/*See the comments for mpi_ssp_completion */
+static void
+mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ u32 param, i;
+ struct sas_task *t;
+ struct pm8001_ccb_info *ccb;
+ unsigned long flags;
+ u32 status;
+ u32 tag;
+ struct smp_completion_resp *psmpPayload;
+ struct task_status_struct *ts;
+ struct pm8001_device *pm8001_dev;
+
+ psmpPayload = (struct smp_completion_resp *)(piomb + 4);
+ status = le32_to_cpu(psmpPayload->status);
+ tag = le32_to_cpu(psmpPayload->tag);
+
+ ccb = &pm8001_ha->ccb_info[tag];
+ param = le32_to_cpu(psmpPayload->param);
+ t = ccb->task;
+ ts = &t->task_status;
+ pm8001_dev = ccb->device;
+ if (status)
+ pm8001_dbg(pm8001_ha, FAIL, "smp IO status 0x%x\n", status);
+ if (unlikely(!t || !t->lldd_task || !t->dev))
+ return;
+
+ pm8001_dbg(pm8001_ha, DEV, "tag::0x%x status::0x%x\n", tag, status);
+
+ switch (status) {
+
+ case IO_SUCCESS:
+ pm8001_dbg(pm8001_ha, IO, "IO_SUCCESS\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_SAM_STAT_GOOD;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ if (pm8001_ha->smp_exp_mode == SMP_DIRECT) {
+ struct scatterlist *sg_resp = &t->smp_task.smp_resp;
+ u8 *payload;
+ void *to;
+
+ pm8001_dbg(pm8001_ha, IO,
+ "DIRECT RESPONSE Length:%d\n",
+ param);
+ to = kmap_atomic(sg_page(sg_resp));
+ payload = to + sg_resp->offset;
+ for (i = 0; i < param; i++) {
+ *(payload + i) = psmpPayload->_r_a[i];
+ pm8001_dbg(pm8001_ha, IO,
+ "SMP Byte%d DMA data 0x%x psmp 0x%x\n",
+ i, *(payload + i),
+ psmpPayload->_r_a[i]);
+ }
+ kunmap_atomic(to);
+ }
+ break;
+ case IO_ABORTED:
+ pm8001_dbg(pm8001_ha, IO, "IO_ABORTED IOMB\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_ABORTED_TASK;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_OVERFLOW:
+ pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ ts->residual = 0;
+ if (pm8001_dev)
+ atomic_dec(&pm8001_dev->running_req);
+ break;
+ case IO_NO_DEVICE:
+ pm8001_dbg(pm8001_ha, IO, "IO_NO_DEVICE\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_PHY_DOWN;
+ break;
+ case IO_ERROR_HW_TIMEOUT:
+ pm8001_dbg(pm8001_ha, IO, "IO_ERROR_HW_TIMEOUT\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_SAM_STAT_BUSY;
+ break;
+ case IO_XFER_ERROR_BREAK:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_SAM_STAT_BUSY;
+ break;
+ case IO_XFER_ERROR_PHY_NOT_READY:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_SAM_STAT_BUSY;
+ break;
+ case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ break;
+ case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ break;
+ case IO_OPEN_CNX_ERROR_BREAK:
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
+ break;
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+ case IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
+ pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+ break;
+ case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+ break;
+ case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+ break;
+ case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+ break;
+ case IO_XFER_ERROR_RX_FRAME:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_RX_FRAME\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ break;
+ case IO_XFER_OPEN_RETRY_TIMEOUT:
+ pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_ERROR_INTERNAL_SMP_RESOURCE:
+ pm8001_dbg(pm8001_ha, IO, "IO_ERROR_INTERNAL_SMP_RESOURCE\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_QUEUE_FULL;
+ break;
+ case IO_PORT_IN_RESET:
+ pm8001_dbg(pm8001_ha, IO, "IO_PORT_IN_RESET\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_DS_NON_OPERATIONAL:
+ pm8001_dbg(pm8001_ha, IO, "IO_DS_NON_OPERATIONAL\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ break;
+ case IO_DS_IN_RECOVERY:
+ pm8001_dbg(pm8001_ha, IO, "IO_DS_IN_RECOVERY\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
+ pm8001_dbg(pm8001_ha, IO,
+ "IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n");
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ default:
+ pm8001_dbg(pm8001_ha, DEVIO, "Unknown status 0x%x\n", status);
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ /* not allowed case. Therefore, return failed status */
+ break;
+ }
+ spin_lock_irqsave(&t->task_state_lock, flags);
+ t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ t->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_dbg(pm8001_ha, FAIL,
+ "task 0x%p done with io_status 0x%x resp 0x%xstat 0x%x but aborted by upper layer!\n",
+ t, status, ts->resp, ts->stat);
+ pm8001_ccb_task_free(pm8001_ha, ccb);
+ } else {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_ccb_task_free(pm8001_ha, ccb);
+ mb();/* in order to force CPU ordering */
+ t->task_done(t);
+ }
+}
+
+/**
+ * pm80xx_hw_event_ack_req- For PM8001, some events need to acknowledge to FW.
+ * @pm8001_ha: our hba card information
+ * @Qnum: the outbound queue message number.
+ * @SEA: source of event to ack
+ * @port_id: port id.
+ * @phyId: phy id.
+ * @param0: parameter 0.
+ * @param1: parameter 1.
+ */
+static void pm80xx_hw_event_ack_req(struct pm8001_hba_info *pm8001_ha,
+ u32 Qnum, u32 SEA, u32 port_id, u32 phyId, u32 param0, u32 param1)
+{
+ struct hw_event_ack_req payload;
+ u32 opc = OPC_INB_SAS_HW_EVENT_ACK;
+
+ memset((u8 *)&payload, 0, sizeof(payload));
+ payload.tag = cpu_to_le32(1);
+ payload.phyid_sea_portid = cpu_to_le32(((SEA & 0xFFFF) << 8) |
+ ((phyId & 0xFF) << 24) | (port_id & 0xFF));
+ payload.param0 = cpu_to_le32(param0);
+ payload.param1 = cpu_to_le32(param1);
+
+ pm8001_mpi_build_cmd(pm8001_ha, Qnum, opc, &payload,
+ sizeof(payload), 0);
+}
+
+static int pm80xx_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha,
+ u32 phyId, u32 phy_op);
+
+static void hw_event_port_recover(struct pm8001_hba_info *pm8001_ha,
+ void *piomb)
+{
+ struct hw_event_resp *pPayload = (struct hw_event_resp *)(piomb + 4);
+ u32 phyid_npip_portstate = le32_to_cpu(pPayload->phyid_npip_portstate);
+ u8 phy_id = (u8)((phyid_npip_portstate & 0xFF0000) >> 16);
+ u32 lr_status_evt_portid =
+ le32_to_cpu(pPayload->lr_status_evt_portid);
+ u8 deviceType = pPayload->sas_identify.dev_type;
+ u8 link_rate = (u8)((lr_status_evt_portid & 0xF0000000) >> 28);
+ struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+ u8 port_id = (u8)(lr_status_evt_portid & 0x000000FF);
+ struct pm8001_port *port = &pm8001_ha->port[port_id];
+
+ if (deviceType == SAS_END_DEVICE) {
+ pm80xx_chip_phy_ctl_req(pm8001_ha, phy_id,
+ PHY_NOTIFY_ENABLE_SPINUP);
+ }
+
+ port->wide_port_phymap |= (1U << phy_id);
+ pm8001_get_lrate_mode(phy, link_rate);
+ phy->sas_phy.oob_mode = SAS_OOB_MODE;
+ phy->phy_state = PHY_STATE_LINK_UP_SPCV;
+ phy->phy_attached = 1;
+}
+
+/**
+ * hw_event_sas_phy_up - FW tells me a SAS phy up event.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static void
+hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct hw_event_resp *pPayload =
+ (struct hw_event_resp *)(piomb + 4);
+ u32 lr_status_evt_portid =
+ le32_to_cpu(pPayload->lr_status_evt_portid);
+ u32 phyid_npip_portstate = le32_to_cpu(pPayload->phyid_npip_portstate);
+
+ u8 link_rate =
+ (u8)((lr_status_evt_portid & 0xF0000000) >> 28);
+ u8 port_id = (u8)(lr_status_evt_portid & 0x000000FF);
+ u8 phy_id =
+ (u8)((phyid_npip_portstate & 0xFF0000) >> 16);
+ u8 portstate = (u8)(phyid_npip_portstate & 0x0000000F);
+
+ struct pm8001_port *port = &pm8001_ha->port[port_id];
+ struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+ unsigned long flags;
+ u8 deviceType = pPayload->sas_identify.dev_type;
+ phy->port = port;
+ port->port_id = port_id;
+ port->port_state = portstate;
+ port->wide_port_phymap |= (1U << phy_id);
+ phy->phy_state = PHY_STATE_LINK_UP_SPCV;
+ pm8001_dbg(pm8001_ha, MSG,
+ "portid:%d; phyid:%d; linkrate:%d; portstate:%x; devicetype:%x\n",
+ port_id, phy_id, link_rate, portstate, deviceType);
+
+ switch (deviceType) {
+ case SAS_PHY_UNUSED:
+ pm8001_dbg(pm8001_ha, MSG, "device type no device.\n");
+ break;
+ case SAS_END_DEVICE:
+ pm8001_dbg(pm8001_ha, MSG, "end device.\n");
+ pm80xx_chip_phy_ctl_req(pm8001_ha, phy_id,
+ PHY_NOTIFY_ENABLE_SPINUP);
+ port->port_attached = 1;
+ pm8001_get_lrate_mode(phy, link_rate);
+ break;
+ case SAS_EDGE_EXPANDER_DEVICE:
+ pm8001_dbg(pm8001_ha, MSG, "expander device.\n");
+ port->port_attached = 1;
+ pm8001_get_lrate_mode(phy, link_rate);
+ break;
+ case SAS_FANOUT_EXPANDER_DEVICE:
+ pm8001_dbg(pm8001_ha, MSG, "fanout expander device.\n");
+ port->port_attached = 1;
+ pm8001_get_lrate_mode(phy, link_rate);
+ break;
+ default:
+ pm8001_dbg(pm8001_ha, DEVIO, "unknown device type(%x)\n",
+ deviceType);
+ break;
+ }
+ phy->phy_type |= PORT_TYPE_SAS;
+ phy->identify.device_type = deviceType;
+ phy->phy_attached = 1;
+ if (phy->identify.device_type == SAS_END_DEVICE)
+ phy->identify.target_port_protocols = SAS_PROTOCOL_SSP;
+ else if (phy->identify.device_type != SAS_PHY_UNUSED)
+ phy->identify.target_port_protocols = SAS_PROTOCOL_SMP;
+ phy->sas_phy.oob_mode = SAS_OOB_MODE;
+ sas_notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE, GFP_ATOMIC);
+ spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags);
+ memcpy(phy->frame_rcvd, &pPayload->sas_identify,
+ sizeof(struct sas_identify_frame)-4);
+ phy->frame_rcvd_size = sizeof(struct sas_identify_frame) - 4;
+ pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
+ spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
+ if (pm8001_ha->flags == PM8001F_RUN_TIME)
+ mdelay(200); /* delay a moment to wait for disk to spin up */
+ pm8001_bytes_dmaed(pm8001_ha, phy_id);
+}
+
+/**
+ * hw_event_sata_phy_up - FW tells me a SATA phy up event.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static void
+hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct hw_event_resp *pPayload =
+ (struct hw_event_resp *)(piomb + 4);
+ u32 phyid_npip_portstate = le32_to_cpu(pPayload->phyid_npip_portstate);
+ u32 lr_status_evt_portid =
+ le32_to_cpu(pPayload->lr_status_evt_portid);
+ u8 link_rate =
+ (u8)((lr_status_evt_portid & 0xF0000000) >> 28);
+ u8 port_id = (u8)(lr_status_evt_portid & 0x000000FF);
+ u8 phy_id =
+ (u8)((phyid_npip_portstate & 0xFF0000) >> 16);
+
+ u8 portstate = (u8)(phyid_npip_portstate & 0x0000000F);
+
+ struct pm8001_port *port = &pm8001_ha->port[port_id];
+ struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+ unsigned long flags;
+ pm8001_dbg(pm8001_ha, EVENT,
+ "HW_EVENT_SATA_PHY_UP phyid:%#x port_id:%#x link_rate:%d portstate:%#x\n",
+ phy_id, port_id, link_rate, portstate);
+
+ phy->port = port;
+ port->port_id = port_id;
+ port->port_state = portstate;
+ phy->phy_state = PHY_STATE_LINK_UP_SPCV;
+ port->port_attached = 1;
+ pm8001_get_lrate_mode(phy, link_rate);
+ phy->phy_type |= PORT_TYPE_SATA;
+ phy->phy_attached = 1;
+ phy->sas_phy.oob_mode = SATA_OOB_MODE;
+ sas_notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE, GFP_ATOMIC);
+ spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags);
+ memcpy(phy->frame_rcvd, ((u8 *)&pPayload->sata_fis - 4),
+ sizeof(struct dev_to_host_fis));
+ phy->frame_rcvd_size = sizeof(struct dev_to_host_fis);
+ phy->identify.target_port_protocols = SAS_PROTOCOL_SATA;
+ phy->identify.device_type = SAS_SATA_DEV;
+ pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
+ spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
+ pm8001_bytes_dmaed(pm8001_ha, phy_id);
+}
+
+/**
+ * hw_event_phy_down - we should notify the libsas the phy is down.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static void
+hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct hw_event_resp *pPayload =
+ (struct hw_event_resp *)(piomb + 4);
+
+ u32 lr_status_evt_portid =
+ le32_to_cpu(pPayload->lr_status_evt_portid);
+ u8 port_id = (u8)(lr_status_evt_portid & 0x000000FF);
+ u32 phyid_npip_portstate = le32_to_cpu(pPayload->phyid_npip_portstate);
+ u8 phy_id =
+ (u8)((phyid_npip_portstate & 0xFF0000) >> 16);
+ u8 portstate = (u8)(phyid_npip_portstate & 0x0000000F);
+
+ struct pm8001_port *port = &pm8001_ha->port[port_id];
+ struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+ u32 port_sata = (phy->phy_type & PORT_TYPE_SATA);
+ port->port_state = portstate;
+ phy->identify.device_type = 0;
+ phy->phy_attached = 0;
+ switch (portstate) {
+ case PORT_VALID:
+ pm8001_dbg(pm8001_ha, EVENT,
+ "HW_EVENT_PHY_DOWN phyid:%#x port_id:%#x portstate: PORT_VALID\n",
+ phy_id, port_id);
+ break;
+ case PORT_INVALID:
+ pm8001_dbg(pm8001_ha, EVENT,
+ "HW_EVENT_PHY_DOWN phyid:%#x port_id:%#x portstate: PORT_INVALID\n",
+ phy_id, port_id);
+ pm8001_dbg(pm8001_ha, MSG,
+ " Last phy Down and port invalid\n");
+ if (port_sata) {
+ phy->phy_type = 0;
+ port->port_attached = 0;
+ pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
+ port_id, phy_id, 0, 0);
+ }
+ sas_phy_disconnected(&phy->sas_phy);
+ break;
+ case PORT_IN_RESET:
+ pm8001_dbg(pm8001_ha, EVENT,
+ "HW_EVENT_PHY_DOWN phyid:%#x port_id:%#x portstate: PORT_IN_RESET\n",
+ phy_id, port_id);
+ break;
+ case PORT_NOT_ESTABLISHED:
+ pm8001_dbg(pm8001_ha, EVENT,
+ "HW_EVENT_PHY_DOWN phyid:%#x port_id:%#x portstate: PORT_NOT_ESTABLISHED\n",
+ phy_id, port_id);
+ port->port_attached = 0;
+ break;
+ case PORT_LOSTCOMM:
+ pm8001_dbg(pm8001_ha, EVENT,
+ "HW_EVENT_PHY_DOWN phyid:%#x port_id:%#x portstate: PORT_LOSTCOMM\n",
+ phy_id, port_id);
+ pm8001_dbg(pm8001_ha, MSG, " Last phy Down and port invalid\n");
+ if (port_sata) {
+ port->port_attached = 0;
+ phy->phy_type = 0;
+ pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
+ port_id, phy_id, 0, 0);
+ }
+ sas_phy_disconnected(&phy->sas_phy);
+ break;
+ default:
+ port->port_attached = 0;
+ pm8001_dbg(pm8001_ha, EVENT,
+ "HW_EVENT_PHY_DOWN phyid:%#x port_id:%#x portstate:%#x\n",
+ phy_id, port_id, portstate);
+ break;
+
+ }
+ if (port_sata && (portstate != PORT_IN_RESET))
+ sas_notify_phy_event(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL,
+ GFP_ATOMIC);
+}
+
+static int mpi_phy_start_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct phy_start_resp *pPayload =
+ (struct phy_start_resp *)(piomb + 4);
+ u32 status =
+ le32_to_cpu(pPayload->status);
+ u32 phy_id =
+ le32_to_cpu(pPayload->phyid) & 0xFF;
+ struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+
+ pm8001_dbg(pm8001_ha, INIT,
+ "phy start resp status:0x%x, phyid:0x%x\n",
+ status, phy_id);
+ if (status == 0)
+ phy->phy_state = PHY_LINK_DOWN;
+
+ if (pm8001_ha->flags == PM8001F_RUN_TIME &&
+ phy->enable_completion != NULL) {
+ complete(phy->enable_completion);
+ phy->enable_completion = NULL;
+ }
+ return 0;
+
+}
+
+/**
+ * mpi_thermal_hw_event - a thermal hw event has come.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_thermal_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct thermal_hw_event *pPayload =
+ (struct thermal_hw_event *)(piomb + 4);
+
+ u32 thermal_event = le32_to_cpu(pPayload->thermal_event);
+ u32 rht_lht = le32_to_cpu(pPayload->rht_lht);
+
+ if (thermal_event & 0x40) {
+ pm8001_dbg(pm8001_ha, IO,
+ "Thermal Event: Local high temperature violated!\n");
+ pm8001_dbg(pm8001_ha, IO,
+ "Thermal Event: Measured local high temperature %d\n",
+ ((rht_lht & 0xFF00) >> 8));
+ }
+ if (thermal_event & 0x10) {
+ pm8001_dbg(pm8001_ha, IO,
+ "Thermal Event: Remote high temperature violated!\n");
+ pm8001_dbg(pm8001_ha, IO,
+ "Thermal Event: Measured remote high temperature %d\n",
+ ((rht_lht & 0xFF000000) >> 24));
+ }
+ return 0;
+}
+
+/**
+ * mpi_hw_event - The hw event has come.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ unsigned long flags, i;
+ struct hw_event_resp *pPayload =
+ (struct hw_event_resp *)(piomb + 4);
+ u32 lr_status_evt_portid =
+ le32_to_cpu(pPayload->lr_status_evt_portid);
+ u32 phyid_npip_portstate = le32_to_cpu(pPayload->phyid_npip_portstate);
+ u8 port_id = (u8)(lr_status_evt_portid & 0x000000FF);
+ u8 phy_id =
+ (u8)((phyid_npip_portstate & 0xFF0000) >> 16);
+ u8 portstate = (u8)(phyid_npip_portstate & 0x0000000F);
+ u16 eventType =
+ (u16)((lr_status_evt_portid & 0x00FFFF00) >> 8);
+ u8 status =
+ (u8)((lr_status_evt_portid & 0x0F000000) >> 24);
+ struct sas_ha_struct *sas_ha = pm8001_ha->sas;
+ struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+ struct pm8001_port *port = &pm8001_ha->port[port_id];
+ struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
+ pm8001_dbg(pm8001_ha, DEV,
+ "portid:%d phyid:%d event:0x%x status:0x%x\n",
+ port_id, phy_id, eventType, status);
+
+ switch (eventType) {
+
+ case HW_EVENT_SAS_PHY_UP:
+ pm8001_dbg(pm8001_ha, EVENT,
+ "HW_EVENT_SAS_PHY_UP phyid:%#x port_id:%#x\n",
+ phy_id, port_id);
+ hw_event_sas_phy_up(pm8001_ha, piomb);
+ break;
+ case HW_EVENT_SATA_PHY_UP:
+ hw_event_sata_phy_up(pm8001_ha, piomb);
+ break;
+ case HW_EVENT_SATA_SPINUP_HOLD:
+ pm8001_dbg(pm8001_ha, EVENT,
+ "HW_EVENT_SATA_SPINUP_HOLD phyid:%#x port_id:%#x\n",
+ phy_id, port_id);
+ sas_notify_phy_event(&phy->sas_phy, PHYE_SPINUP_HOLD,
+ GFP_ATOMIC);
+ break;
+ case HW_EVENT_PHY_DOWN:
+ hw_event_phy_down(pm8001_ha, piomb);
+ phy->phy_state = PHY_LINK_DISABLE;
+ break;
+ case HW_EVENT_PORT_INVALID:
+ pm8001_dbg(pm8001_ha, EVENT,
+ "HW_EVENT_PORT_INVALID phyid:%#x port_id:%#x\n",
+ phy_id, port_id);
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_notify_port_event(sas_phy, PORTE_LINK_RESET_ERR,
+ GFP_ATOMIC);
+ break;
+ /* the broadcast change primitive received, tell the LIBSAS this event
+ to revalidate the sas domain*/
+ case HW_EVENT_BROADCAST_CHANGE:
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_BROADCAST_CHANGE\n");
+ pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_BROADCAST_CHANGE,
+ port_id, phy_id, 1, 0);
+ spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
+ sas_phy->sas_prim = HW_EVENT_BROADCAST_CHANGE;
+ spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
+ sas_notify_port_event(sas_phy, PORTE_BROADCAST_RCVD,
+ GFP_ATOMIC);
+ break;
+ case HW_EVENT_PHY_ERROR:
+ pm8001_dbg(pm8001_ha, EVENT,
+ "HW_EVENT_PHY_ERROR phyid:%#x port_id:%#x\n",
+ phy_id, port_id);
+ sas_phy_disconnected(&phy->sas_phy);
+ phy->phy_attached = 0;
+ sas_notify_phy_event(&phy->sas_phy, PHYE_OOB_ERROR, GFP_ATOMIC);
+ break;
+ case HW_EVENT_BROADCAST_EXP:
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_BROADCAST_EXP\n");
+ spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
+ sas_phy->sas_prim = HW_EVENT_BROADCAST_EXP;
+ spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
+ sas_notify_port_event(sas_phy, PORTE_BROADCAST_RCVD,
+ GFP_ATOMIC);
+ break;
+ case HW_EVENT_LINK_ERR_INVALID_DWORD:
+ pm8001_dbg(pm8001_ha, EVENT,
+ "HW_EVENT_LINK_ERR_INVALID_DWORD phyid:%#x port_id:%#x\n",
+ phy_id, port_id);
+ pm80xx_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_LINK_ERR_INVALID_DWORD, port_id, phy_id, 0, 0);
+ break;
+ case HW_EVENT_LINK_ERR_DISPARITY_ERROR:
+ pm8001_dbg(pm8001_ha, EVENT,
+ "HW_EVENT_LINK_ERR_DISPARITY_ERROR phyid:%#x port_id:%#x\n",
+ phy_id, port_id);
+ pm80xx_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_LINK_ERR_DISPARITY_ERROR,
+ port_id, phy_id, 0, 0);
+ break;
+ case HW_EVENT_LINK_ERR_CODE_VIOLATION:
+ pm8001_dbg(pm8001_ha, EVENT,
+ "HW_EVENT_LINK_ERR_CODE_VIOLATION phyid:%#x port_id:%#x\n",
+ phy_id, port_id);
+ pm80xx_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_LINK_ERR_CODE_VIOLATION,
+ port_id, phy_id, 0, 0);
+ break;
+ case HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH:
+ pm8001_dbg(pm8001_ha, EVENT,
+ "HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH phyid:%#x port_id:%#x\n",
+ phy_id, port_id);
+ pm80xx_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH,
+ port_id, phy_id, 0, 0);
+ break;
+ case HW_EVENT_MALFUNCTION:
+ pm8001_dbg(pm8001_ha, EVENT,
+ "HW_EVENT_MALFUNCTION phyid:%#x\n", phy_id);
+ break;
+ case HW_EVENT_BROADCAST_SES:
+ pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_BROADCAST_SES\n");
+ spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
+ sas_phy->sas_prim = HW_EVENT_BROADCAST_SES;
+ spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
+ sas_notify_port_event(sas_phy, PORTE_BROADCAST_RCVD,
+ GFP_ATOMIC);
+ break;
+ case HW_EVENT_INBOUND_CRC_ERROR:
+ pm8001_dbg(pm8001_ha, EVENT,
+ "HW_EVENT_INBOUND_CRC_ERROR phyid:%#x port_id:%#x\n",
+ phy_id, port_id);
+ pm80xx_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_INBOUND_CRC_ERROR,
+ port_id, phy_id, 0, 0);
+ break;
+ case HW_EVENT_HARD_RESET_RECEIVED:
+ pm8001_dbg(pm8001_ha, EVENT,
+ "HW_EVENT_HARD_RESET_RECEIVED phyid:%#x\n", phy_id);
+ sas_notify_port_event(sas_phy, PORTE_HARD_RESET, GFP_ATOMIC);
+ break;
+ case HW_EVENT_ID_FRAME_TIMEOUT:
+ pm8001_dbg(pm8001_ha, EVENT,
+ "HW_EVENT_ID_FRAME_TIMEOUT phyid:%#x\n", phy_id);
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_notify_port_event(sas_phy, PORTE_LINK_RESET_ERR,
+ GFP_ATOMIC);
+ break;
+ case HW_EVENT_LINK_ERR_PHY_RESET_FAILED:
+ pm8001_dbg(pm8001_ha, EVENT,
+ "HW_EVENT_LINK_ERR_PHY_RESET_FAILED phyid:%#x port_id:%#x\n",
+ phy_id, port_id);
+ pm80xx_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_LINK_ERR_PHY_RESET_FAILED,
+ port_id, phy_id, 0, 0);
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_notify_port_event(sas_phy, PORTE_LINK_RESET_ERR,
+ GFP_ATOMIC);
+ break;
+ case HW_EVENT_PORT_RESET_TIMER_TMO:
+ pm8001_dbg(pm8001_ha, EVENT,
+ "HW_EVENT_PORT_RESET_TIMER_TMO phyid:%#x port_id:%#x portstate:%#x\n",
+ phy_id, port_id, portstate);
+ if (!pm8001_ha->phy[phy_id].reset_completion) {
+ pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
+ port_id, phy_id, 0, 0);
+ }
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ port->port_state = portstate;
+ sas_notify_port_event(sas_phy, PORTE_LINK_RESET_ERR,
+ GFP_ATOMIC);
+ if (pm8001_ha->phy[phy_id].reset_completion) {
+ pm8001_ha->phy[phy_id].port_reset_status =
+ PORT_RESET_TMO;
+ complete(pm8001_ha->phy[phy_id].reset_completion);
+ pm8001_ha->phy[phy_id].reset_completion = NULL;
+ }
+ break;
+ case HW_EVENT_PORT_RECOVERY_TIMER_TMO:
+ pm8001_dbg(pm8001_ha, EVENT,
+ "HW_EVENT_PORT_RECOVERY_TIMER_TMO phyid:%#x port_id:%#x\n",
+ phy_id, port_id);
+ pm80xx_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_PORT_RECOVERY_TIMER_TMO,
+ port_id, phy_id, 0, 0);
+ for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
+ if (port->wide_port_phymap & (1 << i)) {
+ phy = &pm8001_ha->phy[i];
+ sas_notify_phy_event(&phy->sas_phy,
+ PHYE_LOSS_OF_SIGNAL, GFP_ATOMIC);
+ port->wide_port_phymap &= ~(1 << i);
+ }
+ }
+ break;
+ case HW_EVENT_PORT_RECOVER:
+ pm8001_dbg(pm8001_ha, EVENT,
+ "HW_EVENT_PORT_RECOVER phyid:%#x port_id:%#x\n",
+ phy_id, port_id);
+ hw_event_port_recover(pm8001_ha, piomb);
+ break;
+ case HW_EVENT_PORT_RESET_COMPLETE:
+ pm8001_dbg(pm8001_ha, EVENT,
+ "HW_EVENT_PORT_RESET_COMPLETE phyid:%#x port_id:%#x portstate:%#x\n",
+ phy_id, port_id, portstate);
+ if (pm8001_ha->phy[phy_id].reset_completion) {
+ pm8001_ha->phy[phy_id].port_reset_status =
+ PORT_RESET_SUCCESS;
+ complete(pm8001_ha->phy[phy_id].reset_completion);
+ pm8001_ha->phy[phy_id].reset_completion = NULL;
+ }
+ phy->phy_attached = 1;
+ phy->phy_state = PHY_STATE_LINK_UP_SPCV;
+ port->port_state = portstate;
+ break;
+ case EVENT_BROADCAST_ASYNCH_EVENT:
+ pm8001_dbg(pm8001_ha, MSG, "EVENT_BROADCAST_ASYNCH_EVENT\n");
+ break;
+ default:
+ pm8001_dbg(pm8001_ha, DEVIO,
+ "Unknown event portid:%d phyid:%d event:0x%x status:0x%x\n",
+ port_id, phy_id, eventType, status);
+ break;
+ }
+ return 0;
+}
+
+/**
+ * mpi_phy_stop_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_phy_stop_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct phy_stop_resp *pPayload =
+ (struct phy_stop_resp *)(piomb + 4);
+ u32 status =
+ le32_to_cpu(pPayload->status);
+ u32 phyid =
+ le32_to_cpu(pPayload->phyid) & 0xFF;
+ struct pm8001_phy *phy = &pm8001_ha->phy[phyid];
+ pm8001_dbg(pm8001_ha, MSG, "phy:0x%x status:0x%x\n",
+ phyid, status);
+ if (status == PHY_STOP_SUCCESS ||
+ status == PHY_STOP_ERR_DEVICE_ATTACHED) {
+ phy->phy_state = PHY_LINK_DISABLE;
+ phy->sas_phy.phy->negotiated_linkrate = SAS_PHY_DISABLED;
+ phy->sas_phy.linkrate = SAS_PHY_DISABLED;
+ }
+
+ return 0;
+}
+
+/**
+ * mpi_set_controller_config_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_set_controller_config_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb)
+{
+ struct set_ctrl_cfg_resp *pPayload =
+ (struct set_ctrl_cfg_resp *)(piomb + 4);
+ u32 status = le32_to_cpu(pPayload->status);
+ u32 err_qlfr_pgcd = le32_to_cpu(pPayload->err_qlfr_pgcd);
+ u32 tag = le32_to_cpu(pPayload->tag);
+
+ pm8001_dbg(pm8001_ha, MSG,
+ "SET CONTROLLER RESP: status 0x%x qlfr_pgcd 0x%x\n",
+ status, err_qlfr_pgcd);
+ pm8001_tag_free(pm8001_ha, tag);
+
+ return 0;
+}
+
+/**
+ * mpi_get_controller_config_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_get_controller_config_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb)
+{
+ pm8001_dbg(pm8001_ha, MSG, " pm80xx_addition_functionality\n");
+
+ return 0;
+}
+
+/**
+ * mpi_get_phy_profile_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_get_phy_profile_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb)
+{
+ pm8001_dbg(pm8001_ha, MSG, " pm80xx_addition_functionality\n");
+
+ return 0;
+}
+
+/**
+ * mpi_flash_op_ext_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_flash_op_ext_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ pm8001_dbg(pm8001_ha, MSG, " pm80xx_addition_functionality\n");
+
+ return 0;
+}
+
+/**
+ * mpi_set_phy_profile_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_set_phy_profile_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb)
+{
+ u32 tag;
+ u8 page_code;
+ int rc = 0;
+ struct set_phy_profile_resp *pPayload =
+ (struct set_phy_profile_resp *)(piomb + 4);
+ u32 ppc_phyid = le32_to_cpu(pPayload->ppc_phyid);
+ u32 status = le32_to_cpu(pPayload->status);
+
+ tag = le32_to_cpu(pPayload->tag);
+ page_code = (u8)((ppc_phyid & 0xFF00) >> 8);
+ if (status) {
+ /* status is FAILED */
+ pm8001_dbg(pm8001_ha, FAIL,
+ "PhyProfile command failed with status 0x%08X\n",
+ status);
+ rc = -1;
+ } else {
+ if (page_code != SAS_PHY_ANALOG_SETTINGS_PAGE) {
+ pm8001_dbg(pm8001_ha, FAIL, "Invalid page code 0x%X\n",
+ page_code);
+ rc = -1;
+ }
+ }
+ pm8001_tag_free(pm8001_ha, tag);
+ return rc;
+}
+
+/**
+ * mpi_kek_management_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_kek_management_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb)
+{
+ struct kek_mgmt_resp *pPayload = (struct kek_mgmt_resp *)(piomb + 4);
+
+ u32 status = le32_to_cpu(pPayload->status);
+ u32 kidx_new_curr_ksop = le32_to_cpu(pPayload->kidx_new_curr_ksop);
+ u32 err_qlfr = le32_to_cpu(pPayload->err_qlfr);
+
+ pm8001_dbg(pm8001_ha, MSG,
+ "KEK MGMT RESP. Status 0x%x idx_ksop 0x%x err_qlfr 0x%x\n",
+ status, kidx_new_curr_ksop, err_qlfr);
+
+ return 0;
+}
+
+/**
+ * mpi_dek_management_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_dek_management_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb)
+{
+ pm8001_dbg(pm8001_ha, MSG, " pm80xx_addition_functionality\n");
+
+ return 0;
+}
+
+/**
+ * ssp_coalesced_comp_resp - SPCv specific
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int ssp_coalesced_comp_resp(struct pm8001_hba_info *pm8001_ha,
+ void *piomb)
+{
+ pm8001_dbg(pm8001_ha, MSG, " pm80xx_addition_functionality\n");
+
+ return 0;
+}
+
+/**
+ * process_one_iomb - process one outbound Queue memory block
+ * @pm8001_ha: our hba card information
+ * @circularQ: outbound circular queue
+ * @piomb: IO message buffer
+ */
+static void process_one_iomb(struct pm8001_hba_info *pm8001_ha,
+ struct outbound_queue_table *circularQ, void *piomb)
+{
+ __le32 pHeader = *(__le32 *)piomb;
+ u32 opc = (u32)((le32_to_cpu(pHeader)) & 0xFFF);
+
+ switch (opc) {
+ case OPC_OUB_ECHO:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_ECHO\n");
+ break;
+ case OPC_OUB_HW_EVENT:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_HW_EVENT\n");
+ mpi_hw_event(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_THERM_HW_EVENT:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_THERMAL_EVENT\n");
+ mpi_thermal_hw_event(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SSP_COMP:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SSP_COMP\n");
+ mpi_ssp_completion(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SMP_COMP:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SMP_COMP\n");
+ mpi_smp_completion(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_LOCAL_PHY_CNTRL:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_LOCAL_PHY_CNTRL\n");
+ pm8001_mpi_local_phy_ctl(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_DEV_REGIST:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_DEV_REGIST\n");
+ pm8001_mpi_reg_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_DEREG_DEV:
+ pm8001_dbg(pm8001_ha, MSG, "unregister the device\n");
+ pm8001_mpi_dereg_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_GET_DEV_HANDLE:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GET_DEV_HANDLE\n");
+ break;
+ case OPC_OUB_SATA_COMP:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SATA_COMP\n");
+ mpi_sata_completion(pm8001_ha, circularQ, piomb);
+ break;
+ case OPC_OUB_SATA_EVENT:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SATA_EVENT\n");
+ mpi_sata_event(pm8001_ha, circularQ, piomb);
+ break;
+ case OPC_OUB_SSP_EVENT:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SSP_EVENT\n");
+ mpi_ssp_event(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_DEV_HANDLE_ARRIV:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_DEV_HANDLE_ARRIV\n");
+ /*This is for target*/
+ break;
+ case OPC_OUB_SSP_RECV_EVENT:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SSP_RECV_EVENT\n");
+ /*This is for target*/
+ break;
+ case OPC_OUB_FW_FLASH_UPDATE:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_FW_FLASH_UPDATE\n");
+ pm8001_mpi_fw_flash_update_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_GPIO_RESPONSE:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GPIO_RESPONSE\n");
+ break;
+ case OPC_OUB_GPIO_EVENT:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GPIO_EVENT\n");
+ break;
+ case OPC_OUB_GENERAL_EVENT:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GENERAL_EVENT\n");
+ pm8001_mpi_general_event(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SSP_ABORT_RSP:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SSP_ABORT_RSP\n");
+ pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SATA_ABORT_RSP:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SATA_ABORT_RSP\n");
+ pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SAS_DIAG_MODE_START_END:
+ pm8001_dbg(pm8001_ha, MSG,
+ "OPC_OUB_SAS_DIAG_MODE_START_END\n");
+ break;
+ case OPC_OUB_SAS_DIAG_EXECUTE:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SAS_DIAG_EXECUTE\n");
+ break;
+ case OPC_OUB_GET_TIME_STAMP:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GET_TIME_STAMP\n");
+ break;
+ case OPC_OUB_SAS_HW_EVENT_ACK:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SAS_HW_EVENT_ACK\n");
+ break;
+ case OPC_OUB_PORT_CONTROL:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_PORT_CONTROL\n");
+ break;
+ case OPC_OUB_SMP_ABORT_RSP:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SMP_ABORT_RSP\n");
+ pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_GET_NVMD_DATA:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GET_NVMD_DATA\n");
+ pm8001_mpi_get_nvmd_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SET_NVMD_DATA:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SET_NVMD_DATA\n");
+ pm8001_mpi_set_nvmd_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_DEVICE_HANDLE_REMOVAL:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_DEVICE_HANDLE_REMOVAL\n");
+ break;
+ case OPC_OUB_SET_DEVICE_STATE:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SET_DEVICE_STATE\n");
+ pm8001_mpi_set_dev_state_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_GET_DEVICE_STATE:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GET_DEVICE_STATE\n");
+ break;
+ case OPC_OUB_SET_DEV_INFO:
+ pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SET_DEV_INFO\n");
+ break;
+ /* spcv specific commands */
+ case OPC_OUB_PHY_START_RESP:
+ pm8001_dbg(pm8001_ha, MSG,
+ "OPC_OUB_PHY_START_RESP opcode:%x\n", opc);
+ mpi_phy_start_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_PHY_STOP_RESP:
+ pm8001_dbg(pm8001_ha, MSG,
+ "OPC_OUB_PHY_STOP_RESP opcode:%x\n", opc);
+ mpi_phy_stop_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SET_CONTROLLER_CONFIG:
+ pm8001_dbg(pm8001_ha, MSG,
+ "OPC_OUB_SET_CONTROLLER_CONFIG opcode:%x\n", opc);
+ mpi_set_controller_config_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_GET_CONTROLLER_CONFIG:
+ pm8001_dbg(pm8001_ha, MSG,
+ "OPC_OUB_GET_CONTROLLER_CONFIG opcode:%x\n", opc);
+ mpi_get_controller_config_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_GET_PHY_PROFILE:
+ pm8001_dbg(pm8001_ha, MSG,
+ "OPC_OUB_GET_PHY_PROFILE opcode:%x\n", opc);
+ mpi_get_phy_profile_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_FLASH_OP_EXT:
+ pm8001_dbg(pm8001_ha, MSG,
+ "OPC_OUB_FLASH_OP_EXT opcode:%x\n", opc);
+ mpi_flash_op_ext_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SET_PHY_PROFILE:
+ pm8001_dbg(pm8001_ha, MSG,
+ "OPC_OUB_SET_PHY_PROFILE opcode:%x\n", opc);
+ mpi_set_phy_profile_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_KEK_MANAGEMENT_RESP:
+ pm8001_dbg(pm8001_ha, MSG,
+ "OPC_OUB_KEK_MANAGEMENT_RESP opcode:%x\n", opc);
+ mpi_kek_management_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_DEK_MANAGEMENT_RESP:
+ pm8001_dbg(pm8001_ha, MSG,
+ "OPC_OUB_DEK_MANAGEMENT_RESP opcode:%x\n", opc);
+ mpi_dek_management_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SSP_COALESCED_COMP_RESP:
+ pm8001_dbg(pm8001_ha, MSG,
+ "OPC_OUB_SSP_COALESCED_COMP_RESP opcode:%x\n", opc);
+ ssp_coalesced_comp_resp(pm8001_ha, piomb);
+ break;
+ default:
+ pm8001_dbg(pm8001_ha, DEVIO,
+ "Unknown outbound Queue IOMB OPC = 0x%x\n", opc);
+ break;
+ }
+}
+
+static void print_scratchpad_registers(struct pm8001_hba_info *pm8001_ha)
+{
+ pm8001_dbg(pm8001_ha, FAIL, "MSGU_SCRATCH_PAD_0: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0));
+ pm8001_dbg(pm8001_ha, FAIL, "MSGU_SCRATCH_PAD_1:0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1));
+ pm8001_dbg(pm8001_ha, FAIL, "MSGU_SCRATCH_PAD_2: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2));
+ pm8001_dbg(pm8001_ha, FAIL, "MSGU_SCRATCH_PAD_3: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3));
+ pm8001_dbg(pm8001_ha, FAIL, "MSGU_HOST_SCRATCH_PAD_0: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_0));
+ pm8001_dbg(pm8001_ha, FAIL, "MSGU_HOST_SCRATCH_PAD_1: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_1));
+ pm8001_dbg(pm8001_ha, FAIL, "MSGU_HOST_SCRATCH_PAD_2: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_2));
+ pm8001_dbg(pm8001_ha, FAIL, "MSGU_HOST_SCRATCH_PAD_3: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_3));
+ pm8001_dbg(pm8001_ha, FAIL, "MSGU_HOST_SCRATCH_PAD_4: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_4));
+ pm8001_dbg(pm8001_ha, FAIL, "MSGU_HOST_SCRATCH_PAD_5: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_5));
+ pm8001_dbg(pm8001_ha, FAIL, "MSGU_RSVD_SCRATCH_PAD_0: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_RSVD_0));
+ pm8001_dbg(pm8001_ha, FAIL, "MSGU_RSVD_SCRATCH_PAD_1: 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_RSVD_1));
+}
+
+static int process_oq(struct pm8001_hba_info *pm8001_ha, u8 vec)
+{
+ struct outbound_queue_table *circularQ;
+ void *pMsg1 = NULL;
+ u8 bc;
+ u32 ret = MPI_IO_STATUS_FAIL;
+ u32 regval;
+
+ /*
+ * Fatal errors are programmed to be signalled in irq vector
+ * pm8001_ha->max_q_num - 1 through pm8001_ha->main_cfg_tbl.pm80xx_tbl.
+ * fatal_err_interrupt
+ */
+ if (vec == (pm8001_ha->max_q_num - 1)) {
+ u32 mipsall_ready;
+
+ if (pm8001_ha->chip_id == chip_8008 ||
+ pm8001_ha->chip_id == chip_8009)
+ mipsall_ready = SCRATCH_PAD_MIPSALL_READY_8PORT;
+ else
+ mipsall_ready = SCRATCH_PAD_MIPSALL_READY_16PORT;
+
+ regval = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+ if ((regval & mipsall_ready) != mipsall_ready) {
+ pm8001_ha->controller_fatal_error = true;
+ pm8001_dbg(pm8001_ha, FAIL,
+ "Firmware Fatal error! Regval:0x%x\n",
+ regval);
+ pm8001_handle_event(pm8001_ha, NULL, IO_FATAL_ERROR);
+ print_scratchpad_registers(pm8001_ha);
+ return ret;
+ } else {
+ /*read scratchpad rsvd 0 register*/
+ regval = pm8001_cr32(pm8001_ha, 0,
+ MSGU_SCRATCH_PAD_RSVD_0);
+ switch (regval) {
+ case NON_FATAL_SPBC_LBUS_ECC_ERR:
+ case NON_FATAL_BDMA_ERR:
+ case NON_FATAL_THERM_OVERTEMP_ERR:
+ /*Clear the register*/
+ pm8001_cw32(pm8001_ha, 0,
+ MSGU_SCRATCH_PAD_RSVD_0,
+ 0x00000000);
+ break;
+ default:
+ break;
+ }
+ }
+ }
+ circularQ = &pm8001_ha->outbnd_q_tbl[vec];
+ spin_lock_irqsave(&circularQ->oq_lock, circularQ->lock_flags);
+ do {
+ /* spurious interrupt during setup if kexec-ing and
+ * driver doing a doorbell access w/ the pre-kexec oq
+ * interrupt setup.
+ */
+ if (!circularQ->pi_virt)
+ break;
+ ret = pm8001_mpi_msg_consume(pm8001_ha, circularQ, &pMsg1, &bc);
+ if (MPI_IO_STATUS_SUCCESS == ret) {
+ /* process the outbound message */
+ process_one_iomb(pm8001_ha, circularQ,
+ (void *)(pMsg1 - 4));
+ /* free the message from the outbound circular buffer */
+ pm8001_mpi_msg_free_set(pm8001_ha, pMsg1,
+ circularQ, bc);
+ }
+ if (MPI_IO_STATUS_BUSY == ret) {
+ /* Update the producer index from SPC */
+ circularQ->producer_index =
+ cpu_to_le32(pm8001_read_32(circularQ->pi_virt));
+ if (le32_to_cpu(circularQ->producer_index) ==
+ circularQ->consumer_idx)
+ /* OQ is empty */
+ break;
+ }
+ } while (1);
+ spin_unlock_irqrestore(&circularQ->oq_lock, circularQ->lock_flags);
+ return ret;
+}
+
+/* DMA_... to our direction translation. */
+static const u8 data_dir_flags[] = {
+ [DMA_BIDIRECTIONAL] = DATA_DIR_BYRECIPIENT, /* UNSPECIFIED */
+ [DMA_TO_DEVICE] = DATA_DIR_OUT, /* OUTBOUND */
+ [DMA_FROM_DEVICE] = DATA_DIR_IN, /* INBOUND */
+ [DMA_NONE] = DATA_DIR_NONE, /* NO TRANSFER */
+};
+
+static void build_smp_cmd(u32 deviceID, __le32 hTag,
+ struct smp_req *psmp_cmd, int mode, int length)
+{
+ psmp_cmd->tag = hTag;
+ psmp_cmd->device_id = cpu_to_le32(deviceID);
+ if (mode == SMP_DIRECT) {
+ length = length - 4; /* subtract crc */
+ psmp_cmd->len_ip_ir = cpu_to_le32(length << 16);
+ } else {
+ psmp_cmd->len_ip_ir = cpu_to_le32(1|(1 << 1));
+ }
+}
+
+/**
+ * pm80xx_chip_smp_req - send an SMP task to FW
+ * @pm8001_ha: our hba card information.
+ * @ccb: the ccb information this request used.
+ */
+static int pm80xx_chip_smp_req(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb)
+{
+ int elem, rc;
+ struct sas_task *task = ccb->task;
+ struct domain_device *dev = task->dev;
+ struct pm8001_device *pm8001_dev = dev->lldd_dev;
+ struct scatterlist *sg_req, *sg_resp, *smp_req;
+ u32 req_len, resp_len;
+ struct smp_req smp_cmd;
+ u32 opc;
+ u32 i, length;
+ u8 *payload;
+ u8 *to;
+
+ memset(&smp_cmd, 0, sizeof(smp_cmd));
+ /*
+ * DMA-map SMP request, response buffers
+ */
+ sg_req = &task->smp_task.smp_req;
+ elem = dma_map_sg(pm8001_ha->dev, sg_req, 1, DMA_TO_DEVICE);
+ if (!elem)
+ return -ENOMEM;
+ req_len = sg_dma_len(sg_req);
+
+ sg_resp = &task->smp_task.smp_resp;
+ elem = dma_map_sg(pm8001_ha->dev, sg_resp, 1, DMA_FROM_DEVICE);
+ if (!elem) {
+ rc = -ENOMEM;
+ goto err_out;
+ }
+ resp_len = sg_dma_len(sg_resp);
+ /* must be in dwords */
+ if ((req_len & 0x3) || (resp_len & 0x3)) {
+ rc = -EINVAL;
+ goto err_out_2;
+ }
+
+ opc = OPC_INB_SMP_REQUEST;
+ smp_cmd.tag = cpu_to_le32(ccb->ccb_tag);
+
+ length = sg_req->length;
+ pm8001_dbg(pm8001_ha, IO, "SMP Frame Length %d\n", sg_req->length);
+ if (!(length - 8))
+ pm8001_ha->smp_exp_mode = SMP_DIRECT;
+ else
+ pm8001_ha->smp_exp_mode = SMP_INDIRECT;
+
+
+ smp_req = &task->smp_task.smp_req;
+ to = kmap_atomic(sg_page(smp_req));
+ payload = to + smp_req->offset;
+
+ /* INDIRECT MODE command settings. Use DMA */
+ if (pm8001_ha->smp_exp_mode == SMP_INDIRECT) {
+ pm8001_dbg(pm8001_ha, IO, "SMP REQUEST INDIRECT MODE\n");
+ /* for SPCv indirect mode. Place the top 4 bytes of
+ * SMP Request header here. */
+ for (i = 0; i < 4; i++)
+ smp_cmd.smp_req16[i] = *(payload + i);
+ /* exclude top 4 bytes for SMP req header */
+ smp_cmd.long_smp_req.long_req_addr =
+ cpu_to_le64((u64)sg_dma_address
+ (&task->smp_task.smp_req) + 4);
+ /* exclude 4 bytes for SMP req header and CRC */
+ smp_cmd.long_smp_req.long_req_size =
+ cpu_to_le32((u32)sg_dma_len(&task->smp_task.smp_req)-8);
+ smp_cmd.long_smp_req.long_resp_addr =
+ cpu_to_le64((u64)sg_dma_address
+ (&task->smp_task.smp_resp));
+ smp_cmd.long_smp_req.long_resp_size =
+ cpu_to_le32((u32)sg_dma_len
+ (&task->smp_task.smp_resp)-4);
+ } else { /* DIRECT MODE */
+ smp_cmd.long_smp_req.long_req_addr =
+ cpu_to_le64((u64)sg_dma_address
+ (&task->smp_task.smp_req));
+ smp_cmd.long_smp_req.long_req_size =
+ cpu_to_le32((u32)sg_dma_len(&task->smp_task.smp_req)-4);
+ smp_cmd.long_smp_req.long_resp_addr =
+ cpu_to_le64((u64)sg_dma_address
+ (&task->smp_task.smp_resp));
+ smp_cmd.long_smp_req.long_resp_size =
+ cpu_to_le32
+ ((u32)sg_dma_len(&task->smp_task.smp_resp)-4);
+ }
+ if (pm8001_ha->smp_exp_mode == SMP_DIRECT) {
+ pm8001_dbg(pm8001_ha, IO, "SMP REQUEST DIRECT MODE\n");
+ for (i = 0; i < length; i++)
+ if (i < 16) {
+ smp_cmd.smp_req16[i] = *(payload + i);
+ pm8001_dbg(pm8001_ha, IO,
+ "Byte[%d]:%x (DMA data:%x)\n",
+ i, smp_cmd.smp_req16[i],
+ *(payload));
+ } else {
+ smp_cmd.smp_req[i] = *(payload + i);
+ pm8001_dbg(pm8001_ha, IO,
+ "Byte[%d]:%x (DMA data:%x)\n",
+ i, smp_cmd.smp_req[i],
+ *(payload));
+ }
+ }
+ kunmap_atomic(to);
+ build_smp_cmd(pm8001_dev->device_id, smp_cmd.tag,
+ &smp_cmd, pm8001_ha->smp_exp_mode, length);
+ rc = pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &smp_cmd,
+ sizeof(smp_cmd), 0);
+ if (rc)
+ goto err_out_2;
+ return 0;
+
+err_out_2:
+ dma_unmap_sg(pm8001_ha->dev, &ccb->task->smp_task.smp_resp, 1,
+ DMA_FROM_DEVICE);
+err_out:
+ dma_unmap_sg(pm8001_ha->dev, &ccb->task->smp_task.smp_req, 1,
+ DMA_TO_DEVICE);
+ return rc;
+}
+
+static int check_enc_sas_cmd(struct sas_task *task)
+{
+ u8 cmd = task->ssp_task.cmd->cmnd[0];
+
+ if (cmd == READ_10 || cmd == WRITE_10 || cmd == WRITE_VERIFY)
+ return 1;
+ else
+ return 0;
+}
+
+static int check_enc_sat_cmd(struct sas_task *task)
+{
+ int ret = 0;
+ switch (task->ata_task.fis.command) {
+ case ATA_CMD_FPDMA_READ:
+ case ATA_CMD_READ_EXT:
+ case ATA_CMD_READ:
+ case ATA_CMD_FPDMA_WRITE:
+ case ATA_CMD_WRITE_EXT:
+ case ATA_CMD_WRITE:
+ case ATA_CMD_PIO_READ:
+ case ATA_CMD_PIO_READ_EXT:
+ case ATA_CMD_PIO_WRITE:
+ case ATA_CMD_PIO_WRITE_EXT:
+ ret = 1;
+ break;
+ default:
+ ret = 0;
+ break;
+ }
+ return ret;
+}
+
+static u32 pm80xx_chip_get_q_index(struct sas_task *task)
+{
+ struct request *rq = sas_task_find_rq(task);
+
+ if (!rq)
+ return 0;
+
+ return blk_mq_unique_tag_to_hwq(blk_mq_unique_tag(rq));
+}
+
+/**
+ * pm80xx_chip_ssp_io_req - send an SSP task to FW
+ * @pm8001_ha: our hba card information.
+ * @ccb: the ccb information this request used.
+ */
+static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb)
+{
+ struct sas_task *task = ccb->task;
+ struct domain_device *dev = task->dev;
+ struct pm8001_device *pm8001_dev = dev->lldd_dev;
+ struct ssp_ini_io_start_req ssp_cmd;
+ u32 tag = ccb->ccb_tag;
+ u64 phys_addr, end_addr;
+ u32 end_addr_high, end_addr_low;
+ u32 q_index;
+ u32 opc = OPC_INB_SSPINIIOSTART;
+
+ memset(&ssp_cmd, 0, sizeof(ssp_cmd));
+ memcpy(ssp_cmd.ssp_iu.lun, task->ssp_task.LUN, 8);
+
+ /* data address domain added for spcv; set to 0 by host,
+ * used internally by controller
+ * 0 for SAS 1.1 and SAS 2.0 compatible TLR
+ */
+ ssp_cmd.dad_dir_m_tlr =
+ cpu_to_le32(data_dir_flags[task->data_dir] << 8 | 0x0);
+ ssp_cmd.data_len = cpu_to_le32(task->total_xfer_len);
+ ssp_cmd.device_id = cpu_to_le32(pm8001_dev->device_id);
+ ssp_cmd.tag = cpu_to_le32(tag);
+ ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_attr & 7);
+ memcpy(ssp_cmd.ssp_iu.cdb, task->ssp_task.cmd->cmnd,
+ task->ssp_task.cmd->cmd_len);
+ q_index = pm80xx_chip_get_q_index(task);
+
+ /* Check if encryption is set */
+ if (pm8001_ha->chip->encrypt &&
+ !(pm8001_ha->encrypt_info.status) && check_enc_sas_cmd(task)) {
+ pm8001_dbg(pm8001_ha, IO,
+ "Encryption enabled.Sending Encrypt SAS command 0x%x\n",
+ task->ssp_task.cmd->cmnd[0]);
+ opc = OPC_INB_SSP_INI_DIF_ENC_IO;
+ /* enable encryption. 0 for SAS 1.1 and SAS 2.0 compatible TLR*/
+ ssp_cmd.dad_dir_m_tlr = cpu_to_le32
+ ((data_dir_flags[task->data_dir] << 8) | 0x20 | 0x0);
+
+ /* fill in PRD (scatter/gather) table, if any */
+ if (task->num_scatter > 1) {
+ pm8001_chip_make_sg(task->scatter,
+ ccb->n_elem, ccb->buf_prd);
+ phys_addr = ccb->ccb_dma_handle;
+ ssp_cmd.enc_addr_low =
+ cpu_to_le32(lower_32_bits(phys_addr));
+ ssp_cmd.enc_addr_high =
+ cpu_to_le32(upper_32_bits(phys_addr));
+ ssp_cmd.enc_esgl = cpu_to_le32(1<<31);
+ } else if (task->num_scatter == 1) {
+ u64 dma_addr = sg_dma_address(task->scatter);
+
+ ssp_cmd.enc_addr_low =
+ cpu_to_le32(lower_32_bits(dma_addr));
+ ssp_cmd.enc_addr_high =
+ cpu_to_le32(upper_32_bits(dma_addr));
+ ssp_cmd.enc_len = cpu_to_le32(task->total_xfer_len);
+ ssp_cmd.enc_esgl = 0;
+
+ /* Check 4G Boundary */
+ end_addr = dma_addr + le32_to_cpu(ssp_cmd.enc_len) - 1;
+ end_addr_low = lower_32_bits(end_addr);
+ end_addr_high = upper_32_bits(end_addr);
+
+ if (end_addr_high != le32_to_cpu(ssp_cmd.enc_addr_high)) {
+ pm8001_dbg(pm8001_ha, FAIL,
+ "The sg list address start_addr=0x%016llx data_len=0x%x end_addr_high=0x%08x end_addr_low=0x%08x has crossed 4G boundary\n",
+ dma_addr,
+ le32_to_cpu(ssp_cmd.enc_len),
+ end_addr_high, end_addr_low);
+ pm8001_chip_make_sg(task->scatter, 1,
+ ccb->buf_prd);
+ phys_addr = ccb->ccb_dma_handle;
+ ssp_cmd.enc_addr_low =
+ cpu_to_le32(lower_32_bits(phys_addr));
+ ssp_cmd.enc_addr_high =
+ cpu_to_le32(upper_32_bits(phys_addr));
+ ssp_cmd.enc_esgl = cpu_to_le32(1U<<31);
+ }
+ } else if (task->num_scatter == 0) {
+ ssp_cmd.enc_addr_low = 0;
+ ssp_cmd.enc_addr_high = 0;
+ ssp_cmd.enc_len = cpu_to_le32(task->total_xfer_len);
+ ssp_cmd.enc_esgl = 0;
+ }
+
+ /* XTS mode. All other fields are 0 */
+ ssp_cmd.key_cmode = cpu_to_le32(0x6 << 4);
+
+ /* set tweak values. Should be the start lba */
+ ssp_cmd.twk_val0 = cpu_to_le32((task->ssp_task.cmd->cmnd[2] << 24) |
+ (task->ssp_task.cmd->cmnd[3] << 16) |
+ (task->ssp_task.cmd->cmnd[4] << 8) |
+ (task->ssp_task.cmd->cmnd[5]));
+ } else {
+ pm8001_dbg(pm8001_ha, IO,
+ "Sending Normal SAS command 0x%x inb q %x\n",
+ task->ssp_task.cmd->cmnd[0], q_index);
+ /* fill in PRD (scatter/gather) table, if any */
+ if (task->num_scatter > 1) {
+ pm8001_chip_make_sg(task->scatter, ccb->n_elem,
+ ccb->buf_prd);
+ phys_addr = ccb->ccb_dma_handle;
+ ssp_cmd.addr_low =
+ cpu_to_le32(lower_32_bits(phys_addr));
+ ssp_cmd.addr_high =
+ cpu_to_le32(upper_32_bits(phys_addr));
+ ssp_cmd.esgl = cpu_to_le32(1<<31);
+ } else if (task->num_scatter == 1) {
+ u64 dma_addr = sg_dma_address(task->scatter);
+
+ ssp_cmd.addr_low = cpu_to_le32(lower_32_bits(dma_addr));
+ ssp_cmd.addr_high =
+ cpu_to_le32(upper_32_bits(dma_addr));
+ ssp_cmd.len = cpu_to_le32(task->total_xfer_len);
+ ssp_cmd.esgl = 0;
+
+ /* Check 4G Boundary */
+ end_addr = dma_addr + le32_to_cpu(ssp_cmd.len) - 1;
+ end_addr_low = lower_32_bits(end_addr);
+ end_addr_high = upper_32_bits(end_addr);
+ if (end_addr_high != le32_to_cpu(ssp_cmd.addr_high)) {
+ pm8001_dbg(pm8001_ha, FAIL,
+ "The sg list address start_addr=0x%016llx data_len=0x%x end_addr_high=0x%08x end_addr_low=0x%08x has crossed 4G boundary\n",
+ dma_addr,
+ le32_to_cpu(ssp_cmd.len),
+ end_addr_high, end_addr_low);
+ pm8001_chip_make_sg(task->scatter, 1,
+ ccb->buf_prd);
+ phys_addr = ccb->ccb_dma_handle;
+ ssp_cmd.addr_low =
+ cpu_to_le32(lower_32_bits(phys_addr));
+ ssp_cmd.addr_high =
+ cpu_to_le32(upper_32_bits(phys_addr));
+ ssp_cmd.esgl = cpu_to_le32(1<<31);
+ }
+ } else if (task->num_scatter == 0) {
+ ssp_cmd.addr_low = 0;
+ ssp_cmd.addr_high = 0;
+ ssp_cmd.len = cpu_to_le32(task->total_xfer_len);
+ ssp_cmd.esgl = 0;
+ }
+ }
+
+ return pm8001_mpi_build_cmd(pm8001_ha, q_index, opc, &ssp_cmd,
+ sizeof(ssp_cmd), q_index);
+}
+
+static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb)
+{
+ struct sas_task *task = ccb->task;
+ struct domain_device *dev = task->dev;
+ struct pm8001_device *pm8001_ha_dev = dev->lldd_dev;
+ struct ata_queued_cmd *qc = task->uldd_task;
+ u32 tag = ccb->ccb_tag, q_index;
+ struct sata_start_req sata_cmd;
+ u32 hdr_tag, ncg_tag = 0;
+ u64 phys_addr, end_addr;
+ u32 end_addr_high, end_addr_low;
+ u32 ATAP = 0x0;
+ u32 dir, retfis = 0;
+ u32 opc = OPC_INB_SATA_HOST_OPSTART;
+ memset(&sata_cmd, 0, sizeof(sata_cmd));
+
+ q_index = pm80xx_chip_get_q_index(task);
+
+ if (task->data_dir == DMA_NONE && !task->ata_task.use_ncq) {
+ ATAP = 0x04; /* no data*/
+ pm8001_dbg(pm8001_ha, IO, "no data\n");
+ } else if (likely(!task->ata_task.device_control_reg_update)) {
+ if (task->ata_task.use_ncq &&
+ dev->sata_dev.class != ATA_DEV_ATAPI) {
+ ATAP = 0x07; /* FPDMA */
+ pm8001_dbg(pm8001_ha, IO, "FPDMA\n");
+ } else if (task->ata_task.dma_xfer) {
+ ATAP = 0x06; /* DMA */
+ pm8001_dbg(pm8001_ha, IO, "DMA\n");
+ } else {
+ ATAP = 0x05; /* PIO*/
+ pm8001_dbg(pm8001_ha, IO, "PIO\n");
+ }
+ }
+ if (task->ata_task.use_ncq && pm8001_get_ncq_tag(task, &hdr_tag)) {
+ task->ata_task.fis.sector_count |= (u8) (hdr_tag << 3);
+ ncg_tag = hdr_tag;
+ }
+ dir = data_dir_flags[task->data_dir] << 8;
+ sata_cmd.tag = cpu_to_le32(tag);
+ sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
+ sata_cmd.data_len = cpu_to_le32(task->total_xfer_len);
+ if (task->ata_task.return_fis_on_success)
+ retfis = 1;
+ sata_cmd.sata_fis = task->ata_task.fis;
+ if (likely(!task->ata_task.device_control_reg_update))
+ sata_cmd.sata_fis.flags |= 0x80;/* C=1: update ATA cmd reg */
+ sata_cmd.sata_fis.flags &= 0xF0;/* PM_PORT field shall be 0 */
+
+ /* Check if encryption is set */
+ if (pm8001_ha->chip->encrypt &&
+ !(pm8001_ha->encrypt_info.status) && check_enc_sat_cmd(task)) {
+ pm8001_dbg(pm8001_ha, IO,
+ "Encryption enabled.Sending Encrypt SATA cmd 0x%x\n",
+ sata_cmd.sata_fis.command);
+ opc = OPC_INB_SATA_DIF_ENC_IO;
+ /* set encryption bit; dad (bits 0-1) is 0 */
+ sata_cmd.retfis_ncqtag_atap_dir_m_dad =
+ cpu_to_le32((retfis << 24) | ((ncg_tag & 0xff) << 16) |
+ ((ATAP & 0x3f) << 10) | 0x20 | dir);
+ /* fill in PRD (scatter/gather) table, if any */
+ if (task->num_scatter > 1) {
+ pm8001_chip_make_sg(task->scatter,
+ ccb->n_elem, ccb->buf_prd);
+ phys_addr = ccb->ccb_dma_handle;
+ sata_cmd.enc_addr_low =
+ cpu_to_le32(lower_32_bits(phys_addr));
+ sata_cmd.enc_addr_high =
+ cpu_to_le32(upper_32_bits(phys_addr));
+ sata_cmd.enc_esgl = cpu_to_le32(1 << 31);
+ } else if (task->num_scatter == 1) {
+ u64 dma_addr = sg_dma_address(task->scatter);
+
+ sata_cmd.enc_addr_low =
+ cpu_to_le32(lower_32_bits(dma_addr));
+ sata_cmd.enc_addr_high =
+ cpu_to_le32(upper_32_bits(dma_addr));
+ sata_cmd.enc_len = cpu_to_le32(task->total_xfer_len);
+ sata_cmd.enc_esgl = 0;
+
+ /* Check 4G Boundary */
+ end_addr = dma_addr + le32_to_cpu(sata_cmd.enc_len) - 1;
+ end_addr_low = lower_32_bits(end_addr);
+ end_addr_high = upper_32_bits(end_addr);
+ if (end_addr_high != le32_to_cpu(sata_cmd.enc_addr_high)) {
+ pm8001_dbg(pm8001_ha, FAIL,
+ "The sg list address start_addr=0x%016llx data_len=0x%x end_addr_high=0x%08x end_addr_low=0x%08x has crossed 4G boundary\n",
+ dma_addr,
+ le32_to_cpu(sata_cmd.enc_len),
+ end_addr_high, end_addr_low);
+ pm8001_chip_make_sg(task->scatter, 1,
+ ccb->buf_prd);
+ phys_addr = ccb->ccb_dma_handle;
+ sata_cmd.enc_addr_low =
+ cpu_to_le32(lower_32_bits(phys_addr));
+ sata_cmd.enc_addr_high =
+ cpu_to_le32(upper_32_bits(phys_addr));
+ sata_cmd.enc_esgl =
+ cpu_to_le32(1 << 31);
+ }
+ } else if (task->num_scatter == 0) {
+ sata_cmd.enc_addr_low = 0;
+ sata_cmd.enc_addr_high = 0;
+ sata_cmd.enc_len = cpu_to_le32(task->total_xfer_len);
+ sata_cmd.enc_esgl = 0;
+ }
+ /* XTS mode. All other fields are 0 */
+ sata_cmd.key_index_mode = cpu_to_le32(0x6 << 4);
+
+ /* set tweak values. Should be the start lba */
+ sata_cmd.twk_val0 =
+ cpu_to_le32((sata_cmd.sata_fis.lbal_exp << 24) |
+ (sata_cmd.sata_fis.lbah << 16) |
+ (sata_cmd.sata_fis.lbam << 8) |
+ (sata_cmd.sata_fis.lbal));
+ sata_cmd.twk_val1 =
+ cpu_to_le32((sata_cmd.sata_fis.lbah_exp << 8) |
+ (sata_cmd.sata_fis.lbam_exp));
+ } else {
+ pm8001_dbg(pm8001_ha, IO,
+ "Sending Normal SATA command 0x%x inb %x\n",
+ sata_cmd.sata_fis.command, q_index);
+ /* dad (bits 0-1) is 0 */
+ sata_cmd.retfis_ncqtag_atap_dir_m_dad =
+ cpu_to_le32((retfis << 24) | ((ncg_tag & 0xff) << 16) |
+ ((ATAP & 0x3f) << 10) | dir);
+ /* fill in PRD (scatter/gather) table, if any */
+ if (task->num_scatter > 1) {
+ pm8001_chip_make_sg(task->scatter,
+ ccb->n_elem, ccb->buf_prd);
+ phys_addr = ccb->ccb_dma_handle;
+ sata_cmd.addr_low = lower_32_bits(phys_addr);
+ sata_cmd.addr_high = upper_32_bits(phys_addr);
+ sata_cmd.esgl = cpu_to_le32(1U << 31);
+ } else if (task->num_scatter == 1) {
+ u64 dma_addr = sg_dma_address(task->scatter);
+
+ sata_cmd.addr_low = lower_32_bits(dma_addr);
+ sata_cmd.addr_high = upper_32_bits(dma_addr);
+ sata_cmd.len = cpu_to_le32(task->total_xfer_len);
+ sata_cmd.esgl = 0;
+
+ /* Check 4G Boundary */
+ end_addr = dma_addr + le32_to_cpu(sata_cmd.len) - 1;
+ end_addr_low = lower_32_bits(end_addr);
+ end_addr_high = upper_32_bits(end_addr);
+ if (end_addr_high != sata_cmd.addr_high) {
+ pm8001_dbg(pm8001_ha, FAIL,
+ "The sg list address start_addr=0x%016llx data_len=0x%xend_addr_high=0x%08x end_addr_low=0x%08x has crossed 4G boundary\n",
+ dma_addr,
+ le32_to_cpu(sata_cmd.len),
+ end_addr_high, end_addr_low);
+ pm8001_chip_make_sg(task->scatter, 1,
+ ccb->buf_prd);
+ phys_addr = ccb->ccb_dma_handle;
+ sata_cmd.addr_low = lower_32_bits(phys_addr);
+ sata_cmd.addr_high = upper_32_bits(phys_addr);
+ sata_cmd.esgl = cpu_to_le32(1U << 31);
+ }
+ } else if (task->num_scatter == 0) {
+ sata_cmd.addr_low = 0;
+ sata_cmd.addr_high = 0;
+ sata_cmd.len = cpu_to_le32(task->total_xfer_len);
+ sata_cmd.esgl = 0;
+ }
+
+ /* scsi cdb */
+ sata_cmd.atapi_scsi_cdb[0] =
+ cpu_to_le32(((task->ata_task.atapi_packet[0]) |
+ (task->ata_task.atapi_packet[1] << 8) |
+ (task->ata_task.atapi_packet[2] << 16) |
+ (task->ata_task.atapi_packet[3] << 24)));
+ sata_cmd.atapi_scsi_cdb[1] =
+ cpu_to_le32(((task->ata_task.atapi_packet[4]) |
+ (task->ata_task.atapi_packet[5] << 8) |
+ (task->ata_task.atapi_packet[6] << 16) |
+ (task->ata_task.atapi_packet[7] << 24)));
+ sata_cmd.atapi_scsi_cdb[2] =
+ cpu_to_le32(((task->ata_task.atapi_packet[8]) |
+ (task->ata_task.atapi_packet[9] << 8) |
+ (task->ata_task.atapi_packet[10] << 16) |
+ (task->ata_task.atapi_packet[11] << 24)));
+ sata_cmd.atapi_scsi_cdb[3] =
+ cpu_to_le32(((task->ata_task.atapi_packet[12]) |
+ (task->ata_task.atapi_packet[13] << 8) |
+ (task->ata_task.atapi_packet[14] << 16) |
+ (task->ata_task.atapi_packet[15] << 24)));
+ }
+
+ trace_pm80xx_request_issue(pm8001_ha->id,
+ ccb->device ? ccb->device->attached_phy : PM8001_MAX_PHYS,
+ ccb->ccb_tag, opc,
+ qc ? qc->tf.command : 0, // ata opcode
+ ccb->device ? atomic_read(&ccb->device->running_req) : 0);
+ return pm8001_mpi_build_cmd(pm8001_ha, q_index, opc, &sata_cmd,
+ sizeof(sata_cmd), q_index);
+}
+
+/**
+ * pm80xx_chip_phy_start_req - start phy via PHY_START COMMAND
+ * @pm8001_ha: our hba card information.
+ * @phy_id: the phy id which we wanted to start up.
+ */
+static int
+pm80xx_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id)
+{
+ struct phy_start_req payload;
+ u32 tag = 0x01;
+ u32 opcode = OPC_INB_PHYSTART;
+
+ memset(&payload, 0, sizeof(payload));
+ payload.tag = cpu_to_le32(tag);
+
+ pm8001_dbg(pm8001_ha, INIT, "PHY START REQ for phy_id %d\n", phy_id);
+
+ payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE |
+ LINKMODE_AUTO | pm8001_ha->link_rate | phy_id);
+ /* SSC Disable and SAS Analog ST configuration */
+ /*
+ payload.ase_sh_lm_slr_phyid =
+ cpu_to_le32(SSC_DISABLE_30 | SAS_ASE | SPINHOLD_DISABLE |
+ LINKMODE_AUTO | LINKRATE_15 | LINKRATE_30 | LINKRATE_60 |
+ phy_id);
+ Have to add "SAS PHY Analog Setup SPASTI 1 Byte" Based on need
+ */
+
+ payload.sas_identify.dev_type = SAS_END_DEVICE;
+ payload.sas_identify.initiator_bits = SAS_PROTOCOL_ALL;
+ memcpy(payload.sas_identify.sas_addr,
+ &pm8001_ha->phy[phy_id].dev_sas_addr, SAS_ADDR_SIZE);
+ payload.sas_identify.phy_id = phy_id;
+
+ return pm8001_mpi_build_cmd(pm8001_ha, 0, opcode, &payload,
+ sizeof(payload), 0);
+}
+
+/**
+ * pm80xx_chip_phy_stop_req - start phy via PHY_STOP COMMAND
+ * @pm8001_ha: our hba card information.
+ * @phy_id: the phy id which we wanted to start up.
+ */
+static int pm80xx_chip_phy_stop_req(struct pm8001_hba_info *pm8001_ha,
+ u8 phy_id)
+{
+ struct phy_stop_req payload;
+ u32 tag = 0x01;
+ u32 opcode = OPC_INB_PHYSTOP;
+
+ memset(&payload, 0, sizeof(payload));
+ payload.tag = cpu_to_le32(tag);
+ payload.phy_id = cpu_to_le32(phy_id);
+
+ return pm8001_mpi_build_cmd(pm8001_ha, 0, opcode, &payload,
+ sizeof(payload), 0);
+}
+
+/*
+ * see comments on pm8001_mpi_reg_resp.
+ */
+static int pm80xx_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_device *pm8001_dev, u32 flag)
+{
+ struct reg_dev_req payload;
+ u32 opc;
+ u32 stp_sspsmp_sata = 0x4;
+ u32 linkrate, phy_id;
+ int rc;
+ struct pm8001_ccb_info *ccb;
+ u8 retryFlag = 0x1;
+ u16 firstBurstSize = 0;
+ u16 ITNT = 2000;
+ struct domain_device *dev = pm8001_dev->sas_device;
+ struct domain_device *parent_dev = dev->parent;
+ struct pm8001_port *port = dev->port->lldd_port;
+
+ memset(&payload, 0, sizeof(payload));
+ ccb = pm8001_ccb_alloc(pm8001_ha, pm8001_dev, NULL);
+ if (!ccb)
+ return -SAS_QUEUE_FULL;
+
+ payload.tag = cpu_to_le32(ccb->ccb_tag);
+
+ if (flag == 1) {
+ stp_sspsmp_sata = 0x02; /*direct attached sata */
+ } else {
+ if (pm8001_dev->dev_type == SAS_SATA_DEV)
+ stp_sspsmp_sata = 0x00; /* stp*/
+ else if (pm8001_dev->dev_type == SAS_END_DEVICE ||
+ dev_is_expander(pm8001_dev->dev_type))
+ stp_sspsmp_sata = 0x01; /*ssp or smp*/
+ }
+ if (parent_dev && dev_is_expander(parent_dev->dev_type))
+ phy_id = parent_dev->ex_dev.ex_phy->phy_id;
+ else
+ phy_id = pm8001_dev->attached_phy;
+
+ opc = OPC_INB_REG_DEV;
+
+ linkrate = (pm8001_dev->sas_device->linkrate < dev->port->linkrate) ?
+ pm8001_dev->sas_device->linkrate : dev->port->linkrate;
+
+ payload.phyid_portid =
+ cpu_to_le32(((port->port_id) & 0xFF) |
+ ((phy_id & 0xFF) << 8));
+
+ payload.dtype_dlr_mcn_ir_retry = cpu_to_le32((retryFlag & 0x01) |
+ ((linkrate & 0x0F) << 24) |
+ ((stp_sspsmp_sata & 0x03) << 28));
+ payload.firstburstsize_ITNexustimeout =
+ cpu_to_le32(ITNT | (firstBurstSize * 0x10000));
+
+ memcpy(payload.sas_addr, pm8001_dev->sas_device->sas_addr,
+ SAS_ADDR_SIZE);
+
+ pm8001_dbg(pm8001_ha, INIT,
+ "register device req phy_id 0x%x port_id 0x%x\n", phy_id,
+ (port->port_id & 0xFF));
+ rc = pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &payload,
+ sizeof(payload), 0);
+ if (rc)
+ pm8001_ccb_free(pm8001_ha, ccb);
+
+ return rc;
+}
+
+/**
+ * pm80xx_chip_phy_ctl_req - support the local phy operation
+ * @pm8001_ha: our hba card information.
+ * @phyId: the phy id which we wanted to operate
+ * @phy_op: phy operation to request
+ */
+static int pm80xx_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha,
+ u32 phyId, u32 phy_op)
+{
+ u32 tag;
+ int rc;
+ struct local_phy_ctl_req payload;
+ u32 opc = OPC_INB_LOCAL_PHY_CONTROL;
+
+ memset(&payload, 0, sizeof(payload));
+ rc = pm8001_tag_alloc(pm8001_ha, &tag);
+ if (rc)
+ return rc;
+
+ payload.tag = cpu_to_le32(tag);
+ payload.phyop_phyid =
+ cpu_to_le32(((phy_op & 0xFF) << 8) | (phyId & 0xFF));
+
+ rc = pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &payload,
+ sizeof(payload), 0);
+ if (rc)
+ pm8001_tag_free(pm8001_ha, tag);
+
+ return rc;
+}
+
+static u32 pm80xx_chip_is_our_interrupt(struct pm8001_hba_info *pm8001_ha)
+{
+#ifdef PM8001_USE_MSIX
+ return 1;
+#else
+ u32 value;
+
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_ODR);
+ if (value)
+ return 1;
+ return 0;
+#endif
+}
+
+/**
+ * pm80xx_chip_isr - PM8001 isr handler.
+ * @pm8001_ha: our hba card information.
+ * @vec: irq number.
+ */
+static irqreturn_t
+pm80xx_chip_isr(struct pm8001_hba_info *pm8001_ha, u8 vec)
+{
+ pm80xx_chip_interrupt_disable(pm8001_ha, vec);
+ pm8001_dbg(pm8001_ha, DEVIO,
+ "irq vec %d, ODMR:0x%x\n",
+ vec, pm8001_cr32(pm8001_ha, 0, 0x30));
+ process_oq(pm8001_ha, vec);
+ pm80xx_chip_interrupt_enable(pm8001_ha, vec);
+ return IRQ_HANDLED;
+}
+
+static void mpi_set_phy_profile_req(struct pm8001_hba_info *pm8001_ha,
+ u32 operation, u32 phyid,
+ u32 length, u32 *buf)
+{
+ u32 tag, i, j = 0;
+ int rc;
+ struct set_phy_profile_req payload;
+ u32 opc = OPC_INB_SET_PHY_PROFILE;
+
+ memset(&payload, 0, sizeof(payload));
+ rc = pm8001_tag_alloc(pm8001_ha, &tag);
+ if (rc) {
+ pm8001_dbg(pm8001_ha, FAIL, "Invalid tag\n");
+ return;
+ }
+
+ payload.tag = cpu_to_le32(tag);
+ payload.ppc_phyid =
+ cpu_to_le32(((operation & 0xF) << 8) | (phyid & 0xFF));
+ pm8001_dbg(pm8001_ha, DISC,
+ " phy profile command for phy %x ,length is %d\n",
+ le32_to_cpu(payload.ppc_phyid), length);
+ for (i = length; i < (length + PHY_DWORD_LENGTH - 1); i++) {
+ payload.reserved[j] = cpu_to_le32(*((u32 *)buf + i));
+ j++;
+ }
+ rc = pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &payload,
+ sizeof(payload), 0);
+ if (rc)
+ pm8001_tag_free(pm8001_ha, tag);
+}
+
+void pm8001_set_phy_profile(struct pm8001_hba_info *pm8001_ha,
+ u32 length, u8 *buf)
+{
+ u32 i;
+
+ for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
+ mpi_set_phy_profile_req(pm8001_ha,
+ SAS_PHY_ANALOG_SETTINGS_PAGE, i, length, (u32 *)buf);
+ length = length + PHY_DWORD_LENGTH;
+ }
+ pm8001_dbg(pm8001_ha, INIT, "phy settings completed\n");
+}
+
+void pm8001_set_phy_profile_single(struct pm8001_hba_info *pm8001_ha,
+ u32 phy, u32 length, u32 *buf)
+{
+ u32 tag, opc;
+ int rc, i;
+ struct set_phy_profile_req payload;
+
+ memset(&payload, 0, sizeof(payload));
+
+ rc = pm8001_tag_alloc(pm8001_ha, &tag);
+ if (rc) {
+ pm8001_dbg(pm8001_ha, INIT, "Invalid tag\n");
+ return;
+ }
+
+ opc = OPC_INB_SET_PHY_PROFILE;
+
+ payload.tag = cpu_to_le32(tag);
+ payload.ppc_phyid =
+ cpu_to_le32(((SAS_PHY_ANALOG_SETTINGS_PAGE & 0xF) << 8)
+ | (phy & 0xFF));
+
+ for (i = 0; i < length; i++)
+ payload.reserved[i] = cpu_to_le32(*(buf + i));
+
+ rc = pm8001_mpi_build_cmd(pm8001_ha, 0, opc, &payload,
+ sizeof(payload), 0);
+ if (rc)
+ pm8001_tag_free(pm8001_ha, tag);
+
+ pm8001_dbg(pm8001_ha, INIT, "PHY %d settings applied\n", phy);
+}
+const struct pm8001_dispatch pm8001_80xx_dispatch = {
+ .name = "pmc80xx",
+ .chip_init = pm80xx_chip_init,
+ .chip_post_init = pm80xx_chip_post_init,
+ .chip_soft_rst = pm80xx_chip_soft_rst,
+ .chip_rst = pm80xx_hw_chip_rst,
+ .chip_iounmap = pm8001_chip_iounmap,
+ .isr = pm80xx_chip_isr,
+ .is_our_interrupt = pm80xx_chip_is_our_interrupt,
+ .isr_process_oq = process_oq,
+ .interrupt_enable = pm80xx_chip_interrupt_enable,
+ .interrupt_disable = pm80xx_chip_interrupt_disable,
+ .make_prd = pm8001_chip_make_sg,
+ .smp_req = pm80xx_chip_smp_req,
+ .ssp_io_req = pm80xx_chip_ssp_io_req,
+ .sata_req = pm80xx_chip_sata_req,
+ .phy_start_req = pm80xx_chip_phy_start_req,
+ .phy_stop_req = pm80xx_chip_phy_stop_req,
+ .reg_dev_req = pm80xx_chip_reg_dev_req,
+ .dereg_dev_req = pm8001_chip_dereg_dev_req,
+ .phy_ctl_req = pm80xx_chip_phy_ctl_req,
+ .task_abort = pm8001_chip_abort_task,
+ .ssp_tm_req = pm8001_chip_ssp_tm_req,
+ .get_nvmd_req = pm8001_chip_get_nvmd_req,
+ .set_nvmd_req = pm8001_chip_set_nvmd_req,
+ .fw_flash_update_req = pm8001_chip_fw_flash_update_req,
+ .set_dev_state_req = pm8001_chip_set_dev_state_req,
+ .fatal_errors = pm80xx_fatal_errors,
+ .hw_event_ack_req = pm80xx_hw_event_ack_req,
+};
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h b/drivers/scsi/pm8001/pm80xx_hwi.h
new file mode 100644
index 0000000000..eb8fd37b20
--- /dev/null
+++ b/drivers/scsi/pm8001/pm80xx_hwi.h
@@ -0,0 +1,1665 @@
+/*
+ * PMC-Sierra SPCv/ve 8088/8089 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#ifndef _PMC8001_REG_H_
+#define _PMC8001_REG_H_
+
+#include <linux/types.h>
+#include <scsi/libsas.h>
+
+/* for Request Opcode of IOMB */
+#define OPC_INB_ECHO 1 /* 0x000 */
+#define OPC_INB_PHYSTART 4 /* 0x004 */
+#define OPC_INB_PHYSTOP 5 /* 0x005 */
+#define OPC_INB_SSPINIIOSTART 6 /* 0x006 */
+#define OPC_INB_SSPINITMSTART 7 /* 0x007 */
+/* 0x8 RESV IN SPCv */
+#define OPC_INB_RSVD 8 /* 0x008 */
+#define OPC_INB_DEV_HANDLE_ACCEPT 9 /* 0x009 */
+#define OPC_INB_SSPTGTIOSTART 10 /* 0x00A */
+#define OPC_INB_SSPTGTRSPSTART 11 /* 0x00B */
+/* 0xC, 0xD, 0xE removed in SPCv */
+#define OPC_INB_SSP_ABORT 15 /* 0x00F */
+#define OPC_INB_DEREG_DEV_HANDLE 16 /* 0x010 */
+#define OPC_INB_GET_DEV_HANDLE 17 /* 0x011 */
+#define OPC_INB_SMP_REQUEST 18 /* 0x012 */
+/* 0x13 SMP_RESPONSE is removed in SPCv */
+#define OPC_INB_SMP_ABORT 20 /* 0x014 */
+/* 0x16 RESV IN SPCv */
+#define OPC_INB_RSVD1 22 /* 0x016 */
+#define OPC_INB_SATA_HOST_OPSTART 23 /* 0x017 */
+#define OPC_INB_SATA_ABORT 24 /* 0x018 */
+#define OPC_INB_LOCAL_PHY_CONTROL 25 /* 0x019 */
+/* 0x1A RESV IN SPCv */
+#define OPC_INB_RSVD2 26 /* 0x01A */
+#define OPC_INB_FW_FLASH_UPDATE 32 /* 0x020 */
+#define OPC_INB_GPIO 34 /* 0x022 */
+#define OPC_INB_SAS_DIAG_MODE_START_END 35 /* 0x023 */
+#define OPC_INB_SAS_DIAG_EXECUTE 36 /* 0x024 */
+/* 0x25 RESV IN SPCv */
+#define OPC_INB_RSVD3 37 /* 0x025 */
+#define OPC_INB_GET_TIME_STAMP 38 /* 0x026 */
+#define OPC_INB_PORT_CONTROL 39 /* 0x027 */
+#define OPC_INB_GET_NVMD_DATA 40 /* 0x028 */
+#define OPC_INB_SET_NVMD_DATA 41 /* 0x029 */
+#define OPC_INB_SET_DEVICE_STATE 42 /* 0x02A */
+#define OPC_INB_GET_DEVICE_STATE 43 /* 0x02B */
+#define OPC_INB_SET_DEV_INFO 44 /* 0x02C */
+/* 0x2D RESV IN SPCv */
+#define OPC_INB_RSVD4 45 /* 0x02D */
+#define OPC_INB_SGPIO_REGISTER 46 /* 0x02E */
+#define OPC_INB_PCIE_DIAG_EXEC 47 /* 0x02F */
+#define OPC_INB_SET_CONTROLLER_CONFIG 48 /* 0x030 */
+#define OPC_INB_GET_CONTROLLER_CONFIG 49 /* 0x031 */
+#define OPC_INB_REG_DEV 50 /* 0x032 */
+#define OPC_INB_SAS_HW_EVENT_ACK 51 /* 0x033 */
+#define OPC_INB_GET_DEVICE_INFO 52 /* 0x034 */
+#define OPC_INB_GET_PHY_PROFILE 53 /* 0x035 */
+#define OPC_INB_FLASH_OP_EXT 54 /* 0x036 */
+#define OPC_INB_SET_PHY_PROFILE 55 /* 0x037 */
+#define OPC_INB_KEK_MANAGEMENT 256 /* 0x100 */
+#define OPC_INB_DEK_MANAGEMENT 257 /* 0x101 */
+#define OPC_INB_SSP_INI_DIF_ENC_IO 258 /* 0x102 */
+#define OPC_INB_SATA_DIF_ENC_IO 259 /* 0x103 */
+
+/* for Response Opcode of IOMB */
+#define OPC_OUB_ECHO 1 /* 0x001 */
+#define OPC_OUB_RSVD 4 /* 0x004 */
+#define OPC_OUB_SSP_COMP 5 /* 0x005 */
+#define OPC_OUB_SMP_COMP 6 /* 0x006 */
+#define OPC_OUB_LOCAL_PHY_CNTRL 7 /* 0x007 */
+#define OPC_OUB_RSVD1 10 /* 0x00A */
+#define OPC_OUB_DEREG_DEV 11 /* 0x00B */
+#define OPC_OUB_GET_DEV_HANDLE 12 /* 0x00C */
+#define OPC_OUB_SATA_COMP 13 /* 0x00D */
+#define OPC_OUB_SATA_EVENT 14 /* 0x00E */
+#define OPC_OUB_SSP_EVENT 15 /* 0x00F */
+#define OPC_OUB_RSVD2 16 /* 0x010 */
+/* 0x11 - SMP_RECEIVED Notification removed in SPCv*/
+#define OPC_OUB_SSP_RECV_EVENT 18 /* 0x012 */
+#define OPC_OUB_RSVD3 19 /* 0x013 */
+#define OPC_OUB_FW_FLASH_UPDATE 20 /* 0x014 */
+#define OPC_OUB_GPIO_RESPONSE 22 /* 0x016 */
+#define OPC_OUB_GPIO_EVENT 23 /* 0x017 */
+#define OPC_OUB_GENERAL_EVENT 24 /* 0x018 */
+#define OPC_OUB_SSP_ABORT_RSP 26 /* 0x01A */
+#define OPC_OUB_SATA_ABORT_RSP 27 /* 0x01B */
+#define OPC_OUB_SAS_DIAG_MODE_START_END 28 /* 0x01C */
+#define OPC_OUB_SAS_DIAG_EXECUTE 29 /* 0x01D */
+#define OPC_OUB_GET_TIME_STAMP 30 /* 0x01E */
+#define OPC_OUB_RSVD4 31 /* 0x01F */
+#define OPC_OUB_PORT_CONTROL 32 /* 0x020 */
+#define OPC_OUB_SKIP_ENTRY 33 /* 0x021 */
+#define OPC_OUB_SMP_ABORT_RSP 34 /* 0x022 */
+#define OPC_OUB_GET_NVMD_DATA 35 /* 0x023 */
+#define OPC_OUB_SET_NVMD_DATA 36 /* 0x024 */
+#define OPC_OUB_DEVICE_HANDLE_REMOVAL 37 /* 0x025 */
+#define OPC_OUB_SET_DEVICE_STATE 38 /* 0x026 */
+#define OPC_OUB_GET_DEVICE_STATE 39 /* 0x027 */
+#define OPC_OUB_SET_DEV_INFO 40 /* 0x028 */
+#define OPC_OUB_RSVD5 41 /* 0x029 */
+#define OPC_OUB_HW_EVENT 1792 /* 0x700 */
+#define OPC_OUB_DEV_HANDLE_ARRIV 1824 /* 0x720 */
+#define OPC_OUB_THERM_HW_EVENT 1840 /* 0x730 */
+#define OPC_OUB_SGPIO_RESP 2094 /* 0x82E */
+#define OPC_OUB_PCIE_DIAG_EXECUTE 2095 /* 0x82F */
+#define OPC_OUB_DEV_REGIST 2098 /* 0x832 */
+#define OPC_OUB_SAS_HW_EVENT_ACK 2099 /* 0x833 */
+#define OPC_OUB_GET_DEVICE_INFO 2100 /* 0x834 */
+/* spcv specific commands */
+#define OPC_OUB_PHY_START_RESP 2052 /* 0x804 */
+#define OPC_OUB_PHY_STOP_RESP 2053 /* 0x805 */
+#define OPC_OUB_SET_CONTROLLER_CONFIG 2096 /* 0x830 */
+#define OPC_OUB_GET_CONTROLLER_CONFIG 2097 /* 0x831 */
+#define OPC_OUB_GET_PHY_PROFILE 2101 /* 0x835 */
+#define OPC_OUB_FLASH_OP_EXT 2102 /* 0x836 */
+#define OPC_OUB_SET_PHY_PROFILE 2103 /* 0x837 */
+#define OPC_OUB_KEK_MANAGEMENT_RESP 2304 /* 0x900 */
+#define OPC_OUB_DEK_MANAGEMENT_RESP 2305 /* 0x901 */
+#define OPC_OUB_SSP_COALESCED_COMP_RESP 2306 /* 0x902 */
+
+/* for phy start*/
+#define SSC_DISABLE_15 (0x01 << 16)
+#define SSC_DISABLE_30 (0x02 << 16)
+#define SSC_DISABLE_60 (0x04 << 16)
+#define SAS_ASE (0x01 << 15)
+#define SPINHOLD_DISABLE (0x00 << 14)
+#define SPINHOLD_ENABLE (0x01 << 14)
+#define LINKMODE_SAS (0x01 << 12)
+#define LINKMODE_DSATA (0x02 << 12)
+#define LINKMODE_AUTO (0x03 << 12)
+#define LINKRATE_15 (0x01 << 8)
+#define LINKRATE_30 (0x02 << 8)
+#define LINKRATE_60 (0x04 << 8)
+#define LINKRATE_120 (0x08 << 8)
+
+/*phy_stop*/
+#define PHY_STOP_SUCCESS 0x00
+#define PHY_STOP_ERR_DEVICE_ATTACHED 0x1046
+
+/* phy_profile */
+#define SAS_PHY_ANALOG_SETTINGS_PAGE 0x04
+#define PHY_DWORD_LENGTH 0xC
+
+/* Thermal related */
+#define THERMAL_ENABLE 0x1
+#define THERMAL_LOG_ENABLE 0x1
+#define THERMAL_PAGE_CODE_7H 0x6
+#define THERMAL_PAGE_CODE_8H 0x7
+#define LTEMPHIL 70
+#define RTEMPHIL 100
+
+/* Encryption info */
+#define SCRATCH_PAD3_ENC_DISABLED 0x00000000
+#define SCRATCH_PAD3_ENC_DIS_ERR 0x00000001
+#define SCRATCH_PAD3_ENC_ENA_ERR 0x00000002
+#define SCRATCH_PAD3_ENC_READY 0x00000003
+#define SCRATCH_PAD3_ENC_MASK SCRATCH_PAD3_ENC_READY
+
+#define SCRATCH_PAD3_XTS_ENABLED (1 << 14)
+#define SCRATCH_PAD3_SMA_ENABLED (1 << 4)
+#define SCRATCH_PAD3_SMB_ENABLED (1 << 5)
+#define SCRATCH_PAD3_SMF_ENABLED 0
+#define SCRATCH_PAD3_SM_MASK 0x000000F0
+#define SCRATCH_PAD3_ERR_CODE 0x00FF0000
+
+#define SEC_MODE_SMF 0x0
+#define SEC_MODE_SMA 0x100
+#define SEC_MODE_SMB 0x200
+#define CIPHER_MODE_ECB 0x00000001
+#define CIPHER_MODE_XTS 0x00000002
+#define KEK_MGMT_SUBOP_KEYCARDUPDATE 0x4
+
+/* SAS protocol timer configuration page */
+#define SAS_PROTOCOL_TIMER_CONFIG_PAGE 0x04
+#define STP_MCT_TMO 32
+#define SSP_MCT_TMO 32
+#define SAS_MAX_OPEN_TIME 5
+#define SMP_MAX_CONN_TIMER 0xFF
+#define STP_FRM_TIMER 0
+#define STP_IDLE_TIME 5 /* 5 us; controller default */
+#define SAS_MFD 0
+#define SAS_OPNRJT_RTRY_INTVL 2
+#define SAS_DOPNRJT_RTRY_TMO 128
+#define SAS_COPNRJT_RTRY_TMO 128
+
+#define SPCV_DOORBELL_CLEAR_TIMEOUT (30 * 50) /* 30 sec */
+#define SPC_DOORBELL_CLEAR_TIMEOUT (15 * 50) /* 15 sec */
+
+/*
+ Making ORR bigger than IT NEXUS LOSS which is 2000000us = 2 second.
+ Assuming a bigger value 3 second, 3000000/128 = 23437.5 where 128
+ is DOPNRJT_RTRY_TMO
+*/
+#define SAS_DOPNRJT_RTRY_THR 23438
+#define SAS_COPNRJT_RTRY_THR 23438
+#define SAS_MAX_AIP 0x200000
+#define IT_NEXUS_TIMEOUT 0x7D0
+#define PORT_RECOVERY_TIMEOUT ((IT_NEXUS_TIMEOUT/100) + 30)
+/* Port recovery timeout, 10000 ms for PM8006 controller */
+#define CHIP_8006_PORT_RECOVERY_TIMEOUT 0x640000
+
+#ifdef __LITTLE_ENDIAN_BITFIELD
+struct sas_identify_frame_local {
+ /* Byte 0 */
+ u8 frame_type:4;
+ u8 dev_type:3;
+ u8 _un0:1;
+
+ /* Byte 1 */
+ u8 _un1;
+
+ /* Byte 2 */
+ union {
+ struct {
+ u8 _un20:1;
+ u8 smp_iport:1;
+ u8 stp_iport:1;
+ u8 ssp_iport:1;
+ u8 _un247:4;
+ };
+ u8 initiator_bits;
+ };
+
+ /* Byte 3 */
+ union {
+ struct {
+ u8 _un30:1;
+ u8 smp_tport:1;
+ u8 stp_tport:1;
+ u8 ssp_tport:1;
+ u8 _un347:4;
+ };
+ u8 target_bits;
+ };
+
+ /* Byte 4 - 11 */
+ u8 _un4_11[8];
+
+ /* Byte 12 - 19 */
+ u8 sas_addr[SAS_ADDR_SIZE];
+
+ /* Byte 20 */
+ u8 phy_id;
+
+ u8 _un21_27[7];
+
+} __packed;
+
+#elif defined(__BIG_ENDIAN_BITFIELD)
+struct sas_identify_frame_local {
+ /* Byte 0 */
+ u8 _un0:1;
+ u8 dev_type:3;
+ u8 frame_type:4;
+
+ /* Byte 1 */
+ u8 _un1;
+
+ /* Byte 2 */
+ union {
+ struct {
+ u8 _un247:4;
+ u8 ssp_iport:1;
+ u8 stp_iport:1;
+ u8 smp_iport:1;
+ u8 _un20:1;
+ };
+ u8 initiator_bits;
+ };
+
+ /* Byte 3 */
+ union {
+ struct {
+ u8 _un347:4;
+ u8 ssp_tport:1;
+ u8 stp_tport:1;
+ u8 smp_tport:1;
+ u8 _un30:1;
+ };
+ u8 target_bits;
+ };
+
+ /* Byte 4 - 11 */
+ u8 _un4_11[8];
+
+ /* Byte 12 - 19 */
+ u8 sas_addr[SAS_ADDR_SIZE];
+
+ /* Byte 20 */
+ u8 phy_id;
+
+ u8 _un21_27[7];
+} __packed;
+#else
+#error "Bitfield order not defined!"
+#endif
+
+struct mpi_msg_hdr {
+ __le32 header; /* Bits [11:0] - Message operation code */
+ /* Bits [15:12] - Message Category */
+ /* Bits [21:16] - Outboundqueue ID for the
+ operation completion message */
+ /* Bits [23:22] - Reserved */
+ /* Bits [28:24] - Buffer Count, indicates how
+ many buffer are allocated for the massage */
+ /* Bits [30:29] - Reserved */
+ /* Bits [31] - Message Valid bit */
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of PHY Start Command
+ * use to describe enable the phy (128 bytes)
+ */
+struct phy_start_req {
+ __le32 tag;
+ __le32 ase_sh_lm_slr_phyid;
+ struct sas_identify_frame_local sas_identify; /* 28 Bytes */
+ __le32 spasti;
+ u32 reserved[21];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of PHY Start Command
+ * use to disable the phy (128 bytes)
+ */
+struct phy_stop_req {
+ __le32 tag;
+ __le32 phy_id;
+ u32 reserved[29];
+} __attribute__((packed, aligned(4)));
+
+/* set device bits fis - device to host */
+struct set_dev_bits_fis {
+ u8 fis_type; /* 0xA1*/
+ u8 n_i_pmport;
+ /* b7 : n Bit. Notification bit. If set device needs attention. */
+ /* b6 : i Bit. Interrupt Bit */
+ /* b5-b4: reserved2 */
+ /* b3-b0: PM Port */
+ u8 status;
+ u8 error;
+ u32 _r_a;
+} __attribute__ ((packed));
+/* PIO setup FIS - device to host */
+struct pio_setup_fis {
+ u8 fis_type; /* 0x5f */
+ u8 i_d_pmPort;
+ /* b7 : reserved */
+ /* b6 : i bit. Interrupt bit */
+ /* b5 : d bit. data transfer direction. set to 1 for device to host
+ xfer */
+ /* b4 : reserved */
+ /* b3-b0: PM Port */
+ u8 status;
+ u8 error;
+ u8 lbal;
+ u8 lbam;
+ u8 lbah;
+ u8 device;
+ u8 lbal_exp;
+ u8 lbam_exp;
+ u8 lbah_exp;
+ u8 _r_a;
+ u8 sector_count;
+ u8 sector_count_exp;
+ u8 _r_b;
+ u8 e_status;
+ u8 _r_c[2];
+ u8 transfer_count;
+} __attribute__ ((packed));
+
+/*
+ * brief the data structure of SATA Completion Response
+ * use to describe the sata task response (64 bytes)
+ */
+struct sata_completion_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 param;
+ u32 sata_resp[12];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of SAS HW Event Notification
+ * use to alert the host about the hardware event(64 bytes)
+ */
+/* updated outbound struct for spcv */
+
+struct hw_event_resp {
+ __le32 lr_status_evt_portid;
+ __le32 evt_param;
+ __le32 phyid_npip_portstate;
+ struct sas_identify_frame sas_identify;
+ struct dev_to_host_fis sata_fis;
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure for thermal event notification
+ */
+
+struct thermal_hw_event {
+ __le32 thermal_event;
+ __le32 rht_lht;
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of REGISTER DEVICE Command
+ * use to describe MPI REGISTER DEVICE Command (64 bytes)
+ */
+
+struct reg_dev_req {
+ __le32 tag;
+ __le32 phyid_portid;
+ __le32 dtype_dlr_mcn_ir_retry;
+ __le32 firstburstsize_ITNexustimeout;
+ u8 sas_addr[SAS_ADDR_SIZE];
+ __le32 upper_device_id;
+ u32 reserved[24];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of DEREGISTER DEVICE Command
+ * use to request spc to remove all internal resources associated
+ * with the device id (64 bytes)
+ */
+
+struct dereg_dev_req {
+ __le32 tag;
+ __le32 device_id;
+ u32 reserved[29];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of DEVICE_REGISTRATION Response
+ * use to notify the completion of the device registration (64 bytes)
+ */
+struct dev_reg_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 device_id;
+ u32 reserved[12];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of Local PHY Control Command
+ * use to issue PHY CONTROL to local phy (64 bytes)
+ */
+struct local_phy_ctl_req {
+ __le32 tag;
+ __le32 phyop_phyid;
+ u32 reserved1[29];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of Local Phy Control Response
+ * use to describe MPI Local Phy Control Response (64 bytes)
+ */
+ struct local_phy_ctl_resp {
+ __le32 tag;
+ __le32 phyop_phyid;
+ __le32 status;
+ u32 reserved[12];
+} __attribute__((packed, aligned(4)));
+
+#define OP_BITS 0x0000FF00
+#define ID_BITS 0x000000FF
+
+/*
+ * brief the data structure of PORT Control Command
+ * use to control port properties (64 bytes)
+ */
+
+struct port_ctl_req {
+ __le32 tag;
+ __le32 portop_portid;
+ __le32 param0;
+ __le32 param1;
+ u32 reserved1[27];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of HW Event Ack Command
+ * use to acknowledge receive HW event (64 bytes)
+ */
+struct hw_event_ack_req {
+ __le32 tag;
+ __le32 phyid_sea_portid;
+ __le32 param0;
+ __le32 param1;
+ u32 reserved1[27];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of PHY_START Response Command
+ * indicates the completion of PHY_START command (64 bytes)
+ */
+struct phy_start_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 phyid;
+ u32 reserved[12];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of PHY_STOP Response Command
+ * indicates the completion of PHY_STOP command (64 bytes)
+ */
+struct phy_stop_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 phyid;
+ u32 reserved[12];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of SSP Completion Response
+ * use to indicate a SSP Completion (n bytes)
+ */
+struct ssp_completion_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 param;
+ __le32 ssptag_rescv_rescpad;
+ struct ssp_response_iu ssp_resp_iu;
+ __le32 residual_count;
+} __attribute__((packed, aligned(4)));
+
+#define SSP_RESCV_BIT 0x00010000
+
+/*
+ * brief the data structure of SATA EVNET response
+ * use to indicate a SATA Completion (64 bytes)
+ */
+struct sata_event_resp {
+ __le32 tag;
+ __le32 event;
+ __le32 port_id;
+ __le32 device_id;
+ u32 reserved;
+ __le32 event_param0;
+ __le32 event_param1;
+ __le32 sata_addr_h32;
+ __le32 sata_addr_l32;
+ __le32 e_udt1_udt0_crc;
+ __le32 e_udt5_udt4_udt3_udt2;
+ __le32 a_udt1_udt0_crc;
+ __le32 a_udt5_udt4_udt3_udt2;
+ __le32 hwdevid_diferr;
+ __le32 err_framelen_byteoffset;
+ __le32 err_dataframe;
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of SSP EVNET esponse
+ * use to indicate a SSP Completion (64 bytes)
+ */
+struct ssp_event_resp {
+ __le32 tag;
+ __le32 event;
+ __le32 port_id;
+ __le32 device_id;
+ __le32 ssp_tag;
+ __le32 event_param0;
+ __le32 event_param1;
+ __le32 sas_addr_h32;
+ __le32 sas_addr_l32;
+ __le32 e_udt1_udt0_crc;
+ __le32 e_udt5_udt4_udt3_udt2;
+ __le32 a_udt1_udt0_crc;
+ __le32 a_udt5_udt4_udt3_udt2;
+ __le32 hwdevid_diferr;
+ __le32 err_framelen_byteoffset;
+ __le32 err_dataframe;
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of General Event Notification Response
+ * use to describe MPI General Event Notification Response (64 bytes)
+ */
+struct general_event_resp {
+ __le32 status;
+ __le32 inb_IOMB_payload[14];
+} __attribute__((packed, aligned(4)));
+
+#define GENERAL_EVENT_PAYLOAD 14
+#define OPCODE_BITS 0x00000fff
+
+/*
+ * brief the data structure of SMP Request Command
+ * use to describe MPI SMP REQUEST Command (64 bytes)
+ */
+struct smp_req {
+ __le32 tag;
+ __le32 device_id;
+ __le32 len_ip_ir;
+ /* Bits [0] - Indirect response */
+ /* Bits [1] - Indirect Payload */
+ /* Bits [15:2] - Reserved */
+ /* Bits [23:16] - direct payload Len */
+ /* Bits [31:24] - Reserved */
+ u8 smp_req16[16];
+ union {
+ u8 smp_req[32];
+ struct {
+ __le64 long_req_addr;/* sg dma address, LE */
+ __le32 long_req_size;/* LE */
+ u32 _r_a;
+ __le64 long_resp_addr;/* sg dma address, LE */
+ __le32 long_resp_size;/* LE */
+ u32 _r_b;
+ } long_smp_req;/* sequencer extension */
+ };
+ __le32 rsvd[16];
+} __attribute__((packed, aligned(4)));
+/*
+ * brief the data structure of SMP Completion Response
+ * use to describe MPI SMP Completion Response (64 bytes)
+ */
+struct smp_completion_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 param;
+ u8 _r_a[252];
+} __attribute__((packed, aligned(4)));
+
+/*
+ *brief the data structure of SSP SMP SATA Abort Command
+ * use to describe MPI SSP SMP & SATA Abort Command (64 bytes)
+ */
+struct task_abort_req {
+ __le32 tag;
+ __le32 device_id;
+ __le32 tag_to_abort;
+ __le32 abort_all;
+ u32 reserved[27];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of SSP SATA SMP Abort Response
+ * use to describe SSP SMP & SATA Abort Response ( 64 bytes)
+ */
+struct task_abort_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 scp;
+ u32 reserved[12];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of SAS Diagnostic Start/End Command
+ * use to describe MPI SAS Diagnostic Start/End Command (64 bytes)
+ */
+struct sas_diag_start_end_req {
+ __le32 tag;
+ __le32 operation_phyid;
+ u32 reserved[29];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of SAS Diagnostic Execute Command
+ * use to describe MPI SAS Diagnostic Execute Command (64 bytes)
+ */
+struct sas_diag_execute_req {
+ __le32 tag;
+ __le32 cmdtype_cmddesc_phyid;
+ __le32 pat1_pat2;
+ __le32 threshold;
+ __le32 codepat_errmsk;
+ __le32 pmon;
+ __le32 pERF1CTL;
+ u32 reserved[24];
+} __attribute__((packed, aligned(4)));
+
+#define SAS_DIAG_PARAM_BYTES 24
+
+/*
+ * brief the data structure of Set Device State Command
+ * use to describe MPI Set Device State Command (64 bytes)
+ */
+struct set_dev_state_req {
+ __le32 tag;
+ __le32 device_id;
+ __le32 nds;
+ u32 reserved[28];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of SATA Start Command
+ * use to describe MPI SATA IO Start Command (64 bytes)
+ * Note: This structure is common for normal / encryption I/O
+ */
+
+struct sata_start_req {
+ __le32 tag;
+ __le32 device_id;
+ __le32 data_len;
+ __le32 retfis_ncqtag_atap_dir_m_dad;
+ struct host_to_dev_fis sata_fis;
+ u32 reserved1;
+ u32 reserved2; /* dword 11. rsvd for normal I/O. */
+ /* EPLE Descl for enc I/O */
+ u32 addr_low; /* dword 12. rsvd for enc I/O */
+ u32 addr_high; /* dword 13. reserved for enc I/O */
+ __le32 len; /* dword 14: length for normal I/O. */
+ /* EPLE Desch for enc I/O */
+ __le32 esgl; /* dword 15. rsvd for enc I/O */
+ __le32 atapi_scsi_cdb[4]; /* dword 16-19. rsvd for enc I/O */
+ /* The below fields are reserved for normal I/O */
+ __le32 key_index_mode; /* dword 20 */
+ __le32 sector_cnt_enss;/* dword 21 */
+ __le32 keytagl; /* dword 22 */
+ __le32 keytagh; /* dword 23 */
+ __le32 twk_val0; /* dword 24 */
+ __le32 twk_val1; /* dword 25 */
+ __le32 twk_val2; /* dword 26 */
+ __le32 twk_val3; /* dword 27 */
+ __le32 enc_addr_low; /* dword 28. Encryption SGL address high */
+ __le32 enc_addr_high; /* dword 29. Encryption SGL address low */
+ __le32 enc_len; /* dword 30. Encryption length */
+ __le32 enc_esgl; /* dword 31. Encryption esgl bit */
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of SSP INI TM Start Command
+ * use to describe MPI SSP INI TM Start Command (64 bytes)
+ */
+struct ssp_ini_tm_start_req {
+ __le32 tag;
+ __le32 device_id;
+ __le32 relate_tag;
+ __le32 tmf;
+ u8 lun[8];
+ __le32 ds_ads_m;
+ u32 reserved[24];
+} __attribute__((packed, aligned(4)));
+
+struct ssp_info_unit {
+ u8 lun[8];/* SCSI Logical Unit Number */
+ u8 reserved1;/* reserved */
+ u8 efb_prio_attr;
+ /* B7 : enabledFirstBurst */
+ /* B6-3 : taskPriority */
+ /* B2-0 : taskAttribute */
+ u8 reserved2; /* reserved */
+ u8 additional_cdb_len;
+ /* B7-2 : additional_cdb_len */
+ /* B1-0 : reserved */
+ u8 cdb[16];/* The SCSI CDB up to 16 bytes length */
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of SSP INI IO Start Command
+ * use to describe MPI SSP INI IO Start Command (64 bytes)
+ * Note: This structure is common for normal / encryption I/O
+ */
+struct ssp_ini_io_start_req {
+ __le32 tag;
+ __le32 device_id;
+ __le32 data_len;
+ __le32 dad_dir_m_tlr;
+ struct ssp_info_unit ssp_iu;
+ __le32 addr_low; /* dword 12: sgl low for normal I/O. */
+ /* epl_descl for encryption I/O */
+ __le32 addr_high; /* dword 13: sgl hi for normal I/O */
+ /* dpl_descl for encryption I/O */
+ __le32 len; /* dword 14: len for normal I/O. */
+ /* edpl_desch for encryption I/O */
+ __le32 esgl; /* dword 15: ESGL bit for normal I/O. */
+ /* user defined tag mask for enc I/O */
+ /* The below fields are reserved for normal I/O */
+ u8 udt[12]; /* dword 16-18 */
+ __le32 sectcnt_ios; /* dword 19 */
+ __le32 key_cmode; /* dword 20 */
+ __le32 ks_enss; /* dword 21 */
+ __le32 keytagl; /* dword 22 */
+ __le32 keytagh; /* dword 23 */
+ __le32 twk_val0; /* dword 24 */
+ __le32 twk_val1; /* dword 25 */
+ __le32 twk_val2; /* dword 26 */
+ __le32 twk_val3; /* dword 27 */
+ __le32 enc_addr_low; /* dword 28: Encryption sgl addr low */
+ __le32 enc_addr_high; /* dword 29: Encryption sgl addr hi */
+ __le32 enc_len; /* dword 30: Encryption length */
+ __le32 enc_esgl; /* dword 31: ESGL bit for encryption */
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure for SSP_INI_DIF_ENC_IO COMMAND
+ * use to initiate SSP I/O operation with optional DIF/ENC
+ */
+struct ssp_dif_enc_io_req {
+ __le32 tag;
+ __le32 device_id;
+ __le32 data_len;
+ __le32 dirMTlr;
+ __le32 sspiu0;
+ __le32 sspiu1;
+ __le32 sspiu2;
+ __le32 sspiu3;
+ __le32 sspiu4;
+ __le32 sspiu5;
+ __le32 sspiu6;
+ __le32 epl_des;
+ __le32 dpl_desl_ndplr;
+ __le32 dpl_desh;
+ __le32 uum_uuv_bss_difbits;
+ u8 udt[12];
+ __le32 sectcnt_ios;
+ __le32 key_cmode;
+ __le32 ks_enss;
+ __le32 keytagl;
+ __le32 keytagh;
+ __le32 twk_val0;
+ __le32 twk_val1;
+ __le32 twk_val2;
+ __le32 twk_val3;
+ __le32 addr_low;
+ __le32 addr_high;
+ __le32 len;
+ __le32 esgl;
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of Firmware download
+ * use to describe MPI FW DOWNLOAD Command (64 bytes)
+ */
+struct fw_flash_Update_req {
+ __le32 tag;
+ __le32 cur_image_offset;
+ __le32 cur_image_len;
+ __le32 total_image_len;
+ u32 reserved0[7];
+ __le32 sgl_addr_lo;
+ __le32 sgl_addr_hi;
+ __le32 len;
+ __le32 ext_reserved;
+ u32 reserved1[16];
+} __attribute__((packed, aligned(4)));
+
+#define FWFLASH_IOMB_RESERVED_LEN 0x07
+/**
+ * brief the data structure of FW_FLASH_UPDATE Response
+ * use to describe MPI FW_FLASH_UPDATE Response (64 bytes)
+ *
+ */
+ struct fw_flash_Update_resp {
+ __le32 tag;
+ __le32 status;
+ u32 reserved[13];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of Get NVM Data Command
+ * use to get data from NVM in HBA(64 bytes)
+ */
+struct get_nvm_data_req {
+ __le32 tag;
+ __le32 len_ir_vpdd;
+ __le32 vpd_offset;
+ u32 reserved[8];
+ __le32 resp_addr_lo;
+ __le32 resp_addr_hi;
+ __le32 resp_len;
+ u32 reserved1[17];
+} __attribute__((packed, aligned(4)));
+
+struct set_nvm_data_req {
+ __le32 tag;
+ __le32 len_ir_vpdd;
+ __le32 vpd_offset;
+ u32 reserved[8];
+ __le32 resp_addr_lo;
+ __le32 resp_addr_hi;
+ __le32 resp_len;
+ u32 reserved1[17];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure for SET CONTROLLER CONFIG COMMAND
+ * use to modify controller configuration
+ */
+struct set_ctrl_cfg_req {
+ __le32 tag;
+ __le32 cfg_pg[14];
+ u32 reserved[16];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure for GET CONTROLLER CONFIG COMMAND
+ * use to get controller configuration page
+ */
+struct get_ctrl_cfg_req {
+ __le32 tag;
+ __le32 pgcd;
+ __le32 int_vec;
+ u32 reserved[28];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure for KEK_MANAGEMENT COMMAND
+ * use for KEK management
+ */
+struct kek_mgmt_req {
+ __le32 tag;
+ __le32 new_curidx_ksop;
+ u32 reserved;
+ __le32 kblob[12];
+ u32 reserved1[16];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure for DEK_MANAGEMENT COMMAND
+ * use for DEK management
+ */
+struct dek_mgmt_req {
+ __le32 tag;
+ __le32 kidx_dsop;
+ __le32 dekidx;
+ __le32 addr_l;
+ __le32 addr_h;
+ __le32 nent;
+ __le32 dbf_tblsize;
+ u32 reserved[24];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure for SET PHY PROFILE COMMAND
+ * use to retrive phy specific information
+ */
+struct set_phy_profile_req {
+ __le32 tag;
+ __le32 ppc_phyid;
+ __le32 reserved[29];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure for GET PHY PROFILE COMMAND
+ * use to retrive phy specific information
+ */
+struct get_phy_profile_req {
+ __le32 tag;
+ __le32 ppc_phyid;
+ __le32 profile[29];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure for EXT FLASH PARTITION
+ * use to manage ext flash partition
+ */
+struct ext_flash_partition_req {
+ __le32 tag;
+ __le32 cmd;
+ __le32 offset;
+ __le32 len;
+ u32 reserved[7];
+ __le32 addr_low;
+ __le32 addr_high;
+ __le32 len1;
+ __le32 ext;
+ u32 reserved1[16];
+} __attribute__((packed, aligned(4)));
+
+#define TWI_DEVICE 0x0
+#define C_SEEPROM 0x1
+#define VPD_FLASH 0x4
+#define AAP1_RDUMP 0x5
+#define IOP_RDUMP 0x6
+#define EXPAN_ROM 0x7
+
+#define IPMode 0x80000000
+#define NVMD_TYPE 0x0000000F
+#define NVMD_STAT 0x0000FFFF
+#define NVMD_LEN 0xFF000000
+/**
+ * brief the data structure of Get NVMD Data Response
+ * use to describe MPI Get NVMD Data Response (64 bytes)
+ */
+struct get_nvm_data_resp {
+ __le32 tag;
+ __le32 ir_tda_bn_dps_das_nvm;
+ __le32 dlen_status;
+ __le32 nvm_data[12];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of SAS Diagnostic Start/End Response
+ * use to describe MPI SAS Diagnostic Start/End Response (64 bytes)
+ *
+ */
+struct sas_diag_start_end_resp {
+ __le32 tag;
+ __le32 status;
+ u32 reserved[13];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of SAS Diagnostic Execute Response
+ * use to describe MPI SAS Diagnostic Execute Response (64 bytes)
+ *
+ */
+struct sas_diag_execute_resp {
+ __le32 tag;
+ __le32 cmdtype_cmddesc_phyid;
+ __le32 Status;
+ __le32 ReportData;
+ u32 reserved[11];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of Set Device State Response
+ * use to describe MPI Set Device State Response (64 bytes)
+ *
+ */
+struct set_dev_state_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 device_id;
+ __le32 pds_nds;
+ u32 reserved[11];
+} __attribute__((packed, aligned(4)));
+
+/* new outbound structure for spcv - begins */
+/**
+ * brief the data structure for SET CONTROLLER CONFIG COMMAND
+ * use to modify controller configuration
+ */
+struct set_ctrl_cfg_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 err_qlfr_pgcd;
+ u32 reserved[12];
+} __attribute__((packed, aligned(4)));
+
+struct get_ctrl_cfg_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 err_qlfr;
+ __le32 confg_page[12];
+} __attribute__((packed, aligned(4)));
+
+struct kek_mgmt_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 kidx_new_curr_ksop;
+ __le32 err_qlfr;
+ u32 reserved[11];
+} __attribute__((packed, aligned(4)));
+
+struct dek_mgmt_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 kekidx_tbls_dsop;
+ __le32 dekidx;
+ __le32 err_qlfr;
+ u32 reserved[10];
+} __attribute__((packed, aligned(4)));
+
+struct get_phy_profile_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 ppc_phyid;
+ __le32 ppc_specific_rsp[12];
+} __attribute__((packed, aligned(4)));
+
+struct flash_op_ext_resp {
+ __le32 tag;
+ __le32 cmd;
+ __le32 status;
+ __le32 epart_size;
+ __le32 epart_sect_size;
+ u32 reserved[10];
+} __attribute__((packed, aligned(4)));
+
+struct set_phy_profile_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 ppc_phyid;
+ __le32 ppc_specific_rsp[12];
+} __attribute__((packed, aligned(4)));
+
+struct ssp_coalesced_comp_resp {
+ __le32 coal_cnt;
+ __le32 tag0;
+ __le32 ssp_tag0;
+ __le32 tag1;
+ __le32 ssp_tag1;
+ __le32 add_tag_ssp_tag[10];
+} __attribute__((packed, aligned(4)));
+
+/* new outbound structure for spcv - ends */
+
+/* brief data structure for SAS protocol timer configuration page.
+ *
+ */
+struct SASProtocolTimerConfig {
+ __le32 pageCode; /* 0 */
+ __le32 MST_MSI; /* 1 */
+ __le32 STP_SSP_MCT_TMO; /* 2 */
+ __le32 STP_FRM_TMO; /* 3 */
+ __le32 STP_IDLE_TMO; /* 4 */
+ __le32 OPNRJT_RTRY_INTVL; /* 5 */
+ __le32 Data_Cmd_OPNRJT_RTRY_TMO; /* 6 */
+ __le32 Data_Cmd_OPNRJT_RTRY_THR; /* 7 */
+ __le32 MAX_AIP; /* 8 */
+} __attribute__((packed, aligned(4)));
+
+typedef struct SASProtocolTimerConfig SASProtocolTimerConfig_t;
+
+#define NDS_BITS 0x0F
+#define PDS_BITS 0xF0
+
+/*
+ * HW Events type
+ */
+
+#define HW_EVENT_RESET_START 0x01
+#define HW_EVENT_CHIP_RESET_COMPLETE 0x02
+#define HW_EVENT_PHY_STOP_STATUS 0x03
+#define HW_EVENT_SAS_PHY_UP 0x04
+#define HW_EVENT_SATA_PHY_UP 0x05
+#define HW_EVENT_SATA_SPINUP_HOLD 0x06
+#define HW_EVENT_PHY_DOWN 0x07
+#define HW_EVENT_PORT_INVALID 0x08
+#define HW_EVENT_BROADCAST_CHANGE 0x09
+#define HW_EVENT_PHY_ERROR 0x0A
+#define HW_EVENT_BROADCAST_SES 0x0B
+#define HW_EVENT_INBOUND_CRC_ERROR 0x0C
+#define HW_EVENT_HARD_RESET_RECEIVED 0x0D
+#define HW_EVENT_MALFUNCTION 0x0E
+#define HW_EVENT_ID_FRAME_TIMEOUT 0x0F
+#define HW_EVENT_BROADCAST_EXP 0x10
+#define HW_EVENT_PHY_START_STATUS 0x11
+#define HW_EVENT_LINK_ERR_INVALID_DWORD 0x12
+#define HW_EVENT_LINK_ERR_DISPARITY_ERROR 0x13
+#define HW_EVENT_LINK_ERR_CODE_VIOLATION 0x14
+#define HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH 0x15
+#define HW_EVENT_LINK_ERR_PHY_RESET_FAILED 0x16
+#define HW_EVENT_PORT_RECOVERY_TIMER_TMO 0x17
+#define HW_EVENT_PORT_RECOVER 0x18
+#define HW_EVENT_PORT_RESET_TIMER_TMO 0x19
+#define HW_EVENT_PORT_RESET_COMPLETE 0x20
+#define EVENT_BROADCAST_ASYNCH_EVENT 0x21
+
+/* port state */
+#define PORT_NOT_ESTABLISHED 0x00
+#define PORT_VALID 0x01
+#define PORT_LOSTCOMM 0x02
+#define PORT_IN_RESET 0x04
+#define PORT_3RD_PARTY_RESET 0x07
+#define PORT_INVALID 0x08
+
+/*
+ * SSP/SMP/SATA IO Completion Status values
+ */
+
+#define IO_SUCCESS 0x00
+#define IO_ABORTED 0x01
+#define IO_OVERFLOW 0x02
+#define IO_UNDERFLOW 0x03
+#define IO_FAILED 0x04
+#define IO_ABORT_RESET 0x05
+#define IO_NOT_VALID 0x06
+#define IO_NO_DEVICE 0x07
+#define IO_ILLEGAL_PARAMETER 0x08
+#define IO_LINK_FAILURE 0x09
+#define IO_PROG_ERROR 0x0A
+
+#define IO_EDC_IN_ERROR 0x0B
+#define IO_EDC_OUT_ERROR 0x0C
+#define IO_ERROR_HW_TIMEOUT 0x0D
+#define IO_XFER_ERROR_BREAK 0x0E
+#define IO_XFER_ERROR_PHY_NOT_READY 0x0F
+#define IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED 0x10
+#define IO_OPEN_CNX_ERROR_ZONE_VIOLATION 0x11
+#define IO_OPEN_CNX_ERROR_BREAK 0x12
+#define IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS 0x13
+#define IO_OPEN_CNX_ERROR_BAD_DESTINATION 0x14
+#define IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED 0x15
+#define IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY 0x16
+#define IO_OPEN_CNX_ERROR_WRONG_DESTINATION 0x17
+/* This error code 0x18 is not used on SPCv */
+#define IO_OPEN_CNX_ERROR_UNKNOWN_ERROR 0x18
+#define IO_XFER_ERROR_NAK_RECEIVED 0x19
+#define IO_XFER_ERROR_ACK_NAK_TIMEOUT 0x1A
+#define IO_XFER_ERROR_PEER_ABORTED 0x1B
+#define IO_XFER_ERROR_RX_FRAME 0x1C
+#define IO_XFER_ERROR_DMA 0x1D
+#define IO_XFER_ERROR_CREDIT_TIMEOUT 0x1E
+#define IO_XFER_ERROR_SATA_LINK_TIMEOUT 0x1F
+#define IO_XFER_ERROR_SATA 0x20
+
+/* This error code 0x22 is not used on SPCv */
+#define IO_XFER_ERROR_ABORTED_DUE_TO_SRST 0x22
+#define IO_XFER_ERROR_REJECTED_NCQ_MODE 0x21
+#define IO_XFER_ERROR_ABORTED_NCQ_MODE 0x23
+#define IO_XFER_OPEN_RETRY_TIMEOUT 0x24
+/* This error code 0x25 is not used on SPCv */
+#define IO_XFER_SMP_RESP_CONNECTION_ERROR 0x25
+#define IO_XFER_ERROR_UNEXPECTED_PHASE 0x26
+#define IO_XFER_ERROR_XFER_RDY_OVERRUN 0x27
+#define IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED 0x28
+#define IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT 0x30
+
+/* The following error code 0x31 and 0x32 are not using (obsolete) */
+#define IO_XFER_ERROR_CMD_ISSUE_BREAK_BEFORE_ACK_NAK 0x31
+#define IO_XFER_ERROR_CMD_ISSUE_PHY_DOWN_BEFORE_ACK_NAK 0x32
+
+#define IO_XFER_ERROR_OFFSET_MISMATCH 0x34
+#define IO_XFER_ERROR_XFER_ZERO_DATA_LEN 0x35
+#define IO_XFER_CMD_FRAME_ISSUED 0x36
+#define IO_ERROR_INTERNAL_SMP_RESOURCE 0x37
+#define IO_PORT_IN_RESET 0x38
+#define IO_DS_NON_OPERATIONAL 0x39
+#define IO_DS_IN_RECOVERY 0x3A
+#define IO_TM_TAG_NOT_FOUND 0x3B
+#define IO_XFER_PIO_SETUP_ERROR 0x3C
+#define IO_SSP_EXT_IU_ZERO_LEN_ERROR 0x3D
+#define IO_DS_IN_ERROR 0x3E
+#define IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY 0x3F
+#define IO_ABORT_IN_PROGRESS 0x40
+#define IO_ABORT_DELAYED 0x41
+#define IO_INVALID_LENGTH 0x42
+
+/********** additional response event values *****************/
+
+#define IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY_ALT 0x43
+#define IO_XFER_OPEN_RETRY_BACKOFF_THRESHOLD_REACHED 0x44
+#define IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_TMO 0x45
+#define IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST 0x46
+#define IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE 0x47
+#define IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED 0x48
+#define IO_DS_INVALID 0x49
+#define IO_FATAL_ERROR 0x51
+/* WARNING: the value is not contiguous from here */
+#define IO_XFER_ERR_LAST_PIO_DATAIN_CRC_ERR 0x52
+#define IO_XFER_DMA_ACTIVATE_TIMEOUT 0x53
+#define IO_XFER_ERROR_INTERNAL_CRC_ERROR 0x54
+#define MPI_IO_RQE_BUSY_FULL 0x55
+#define IO_XFER_ERR_EOB_DATA_OVERRUN 0x56
+#define IO_XFER_ERROR_INVALID_SSP_RSP_FRAME 0x57
+#define IO_OPEN_CNX_ERROR_OPEN_PREEMPTED 0x58
+
+#define MPI_ERR_IO_RESOURCE_UNAVAILABLE 0x1004
+#define MPI_ERR_ATAPI_DEVICE_BUSY 0x1024
+
+#define IO_XFR_ERROR_DEK_KEY_CACHE_MISS 0x2040
+/*
+ * An encryption IO request failed due to DEK Key Tag mismatch.
+ * The key tag supplied in the encryption IOMB does not match with
+ * the Key Tag in the referenced DEK Entry.
+ */
+#define IO_XFR_ERROR_DEK_KEY_TAG_MISMATCH 0x2041
+#define IO_XFR_ERROR_CIPHER_MODE_INVALID 0x2042
+/*
+ * An encryption I/O request failed because the initial value (IV)
+ * in the unwrapped DEK blob didn't match the IV used to unwrap it.
+ */
+#define IO_XFR_ERROR_DEK_IV_MISMATCH 0x2043
+/* An encryption I/O request failed due to an internal RAM ECC or
+ * interface error while unwrapping the DEK. */
+#define IO_XFR_ERROR_DEK_RAM_INTERFACE_ERROR 0x2044
+/* An encryption I/O request failed due to an internal RAM ECC or
+ * interface error while unwrapping the DEK. */
+#define IO_XFR_ERROR_INTERNAL_RAM 0x2045
+/*
+ * An encryption I/O request failed
+ * because the DEK index specified in the I/O was outside the bounds of
+ * the total number of entries in the host DEK table.
+ */
+#define IO_XFR_ERROR_DEK_INDEX_OUT_OF_BOUNDS0x2046
+
+/* define DIF IO response error status code */
+#define IO_XFR_ERROR_DIF_MISMATCH 0x3000
+#define IO_XFR_ERROR_DIF_APPLICATION_TAG_MISMATCH 0x3001
+#define IO_XFR_ERROR_DIF_REFERENCE_TAG_MISMATCH 0x3002
+#define IO_XFR_ERROR_DIF_CRC_MISMATCH 0x3003
+
+/* define operator management response status and error qualifier code */
+#define OPR_MGMT_OP_NOT_SUPPORTED 0x2060
+#define OPR_MGMT_MPI_ENC_ERR_OPR_PARAM_ILLEGAL 0x2061
+#define OPR_MGMT_MPI_ENC_ERR_OPR_ID_NOT_FOUND 0x2062
+#define OPR_MGMT_MPI_ENC_ERR_OPR_ROLE_NOT_MATCH 0x2063
+#define OPR_MGMT_MPI_ENC_ERR_OPR_MAX_NUM_EXCEEDED 0x2064
+#define OPR_MGMT_MPI_ENC_ERR_KEK_UNWRAP_FAIL 0x2022
+#define OPR_MGMT_MPI_ENC_ERR_NVRAM_OPERATION_FAILURE 0x2023
+/***************** additional response event values ***************/
+
+/* WARNING: This error code must always be the last number.
+ * If you add error code, modify this code also
+ * It is used as an index
+ */
+#define IO_ERROR_UNKNOWN_GENERIC 0x2023
+
+/* MSGU CONFIGURATION TABLE*/
+
+#define SPCv_MSGU_CFG_TABLE_UPDATE 0x001
+#define SPCv_MSGU_CFG_TABLE_RESET 0x002
+#define SPCv_MSGU_CFG_TABLE_FREEZE 0x004
+#define SPCv_MSGU_CFG_TABLE_UNFREEZE 0x008
+#define MSGU_IBDB_SET 0x00
+#define MSGU_HOST_INT_STATUS 0x08
+#define MSGU_HOST_INT_MASK 0x0C
+#define MSGU_IOPIB_INT_STATUS 0x18
+#define MSGU_IOPIB_INT_MASK 0x1C
+#define MSGU_IBDB_CLEAR 0x20
+
+#define MSGU_MSGU_CONTROL 0x24
+#define MSGU_ODR 0x20
+#define MSGU_ODCR 0x28
+
+#define MSGU_ODMR 0x30
+#define MSGU_ODMR_U 0x34
+#define MSGU_ODMR_CLR 0x38
+#define MSGU_ODMR_CLR_U 0x3C
+#define MSGU_OD_RSVD 0x40
+
+#define MSGU_SCRATCH_PAD_0 0x44
+#define MSGU_SCRATCH_PAD_1 0x48
+#define MSGU_SCRATCH_PAD_2 0x4C
+#define MSGU_SCRATCH_PAD_3 0x50
+#define MSGU_HOST_SCRATCH_PAD_0 0x54
+#define MSGU_HOST_SCRATCH_PAD_1 0x58
+#define MSGU_HOST_SCRATCH_PAD_2 0x5C
+#define MSGU_HOST_SCRATCH_PAD_3 0x60
+#define MSGU_HOST_SCRATCH_PAD_4 0x64
+#define MSGU_HOST_SCRATCH_PAD_5 0x68
+#define MSGU_SCRATCH_PAD_RSVD_0 0x6C
+#define MSGU_SCRATCH_PAD_RSVD_1 0x70
+
+#define MSGU_SCRATCHPAD1_RAAE_STATE_ERR(x) ((x & 0x3) == 0x2)
+#define MSGU_SCRATCHPAD1_ILA_STATE_ERR(x) (((x >> 2) & 0x3) == 0x2)
+#define MSGU_SCRATCHPAD1_BOOTLDR_STATE_ERR(x) ((((x >> 4) & 0x7) == 0x7) || \
+ (((x >> 4) & 0x7) == 0x4))
+#define MSGU_SCRATCHPAD1_IOP0_STATE_ERR(x) (((x >> 10) & 0x3) == 0x2)
+#define MSGU_SCRATCHPAD1_IOP1_STATE_ERR(x) (((x >> 12) & 0x3) == 0x2)
+#define MSGU_SCRATCHPAD1_STATE_FATAL_ERROR(x) \
+ (MSGU_SCRATCHPAD1_RAAE_STATE_ERR(x) || \
+ MSGU_SCRATCHPAD1_ILA_STATE_ERR(x) || \
+ MSGU_SCRATCHPAD1_BOOTLDR_STATE_ERR(x) || \
+ MSGU_SCRATCHPAD1_IOP0_STATE_ERR(x) || \
+ MSGU_SCRATCHPAD1_IOP1_STATE_ERR(x))
+
+/* bit definition for ODMR register */
+#define ODMR_MASK_ALL 0xFFFFFFFF/* mask all
+ interrupt vector */
+#define ODMR_CLEAR_ALL 0 /* clear all
+ interrupt vector */
+/* bit definition for ODCR register */
+#define ODCR_CLEAR_ALL 0xFFFFFFFF /* mask all
+ interrupt vector*/
+/* MSIX Interupts */
+#define MSIX_TABLE_OFFSET 0x2000
+#define MSIX_TABLE_ELEMENT_SIZE 0x10
+#define MSIX_INTERRUPT_CONTROL_OFFSET 0xC
+#define MSIX_TABLE_BASE (MSIX_TABLE_OFFSET + \
+ MSIX_INTERRUPT_CONTROL_OFFSET)
+#define MSIX_INTERRUPT_DISABLE 0x1
+#define MSIX_INTERRUPT_ENABLE 0x0
+
+/* state definition for Scratch Pad1 register */
+#define SCRATCH_PAD_RAAE_READY 0x3
+#define SCRATCH_PAD_ILA_READY 0xC
+#define SCRATCH_PAD_BOOT_LOAD_SUCCESS 0x0
+#define SCRATCH_PAD_IOP0_READY 0xC00
+#define SCRATCH_PAD_IOP1_READY 0x3000
+#define SCRATCH_PAD_MIPSALL_READY_16PORT (SCRATCH_PAD_IOP1_READY | \
+ SCRATCH_PAD_IOP0_READY | \
+ SCRATCH_PAD_ILA_READY | \
+ SCRATCH_PAD_RAAE_READY)
+#define SCRATCH_PAD_MIPSALL_READY_8PORT (SCRATCH_PAD_IOP0_READY | \
+ SCRATCH_PAD_ILA_READY | \
+ SCRATCH_PAD_RAAE_READY)
+
+/* boot loader state */
+#define SCRATCH_PAD1_BOOTSTATE_MASK 0x70 /* Bit 4-6 */
+#define SCRATCH_PAD1_BOOTSTATE_SUCESS 0x0 /* Load successful */
+#define SCRATCH_PAD1_BOOTSTATE_HDA_SEEPROM 0x10 /* HDA SEEPROM */
+#define SCRATCH_PAD1_BOOTSTATE_HDA_BOOTSTRAP 0x20 /* HDA BootStrap Pins */
+#define SCRATCH_PAD1_BOOTSTATE_HDA_SOFTRESET 0x30 /* HDA Soft Reset */
+#define SCRATCH_PAD1_BOOTSTATE_CRIT_ERROR 0x40 /* HDA critical error */
+#define SCRATCH_PAD1_BOOTSTATE_R1 0x50 /* Reserved */
+#define SCRATCH_PAD1_BOOTSTATE_R2 0x60 /* Reserved */
+#define SCRATCH_PAD1_BOOTSTATE_FATAL 0x70 /* Fatal Error */
+
+ /* state definition for Scratch Pad2 register */
+#define SCRATCH_PAD2_POR 0x00 /* power on state */
+#define SCRATCH_PAD2_SFR 0x01 /* soft reset state */
+#define SCRATCH_PAD2_ERR 0x02 /* error state */
+#define SCRATCH_PAD2_RDY 0x03 /* ready state */
+#define SCRATCH_PAD2_FWRDY_RST 0x04 /* FW rdy for soft reset flag */
+#define SCRATCH_PAD2_IOPRDY_RST 0x08 /* IOP ready for soft reset */
+#define SCRATCH_PAD2_STATE_MASK 0xFFFFFFF4 /* ScratchPad 2
+ Mask, bit1-0 State */
+#define SCRATCH_PAD2_RESERVED 0x000003FC/* Scratch Pad1
+ Reserved bit 2 to 9 */
+
+#define SCRATCH_PAD_ERROR_MASK 0xFFFFFC00 /* Error mask bits */
+#define SCRATCH_PAD_STATE_MASK 0x00000003 /* State Mask bits */
+
+/*state definition for Scratchpad Rsvd 0, Offset 0x6C, Non-fatal*/
+#define NON_FATAL_SPBC_LBUS_ECC_ERR 0x70000001
+#define NON_FATAL_BDMA_ERR 0xE0000001
+#define NON_FATAL_THERM_OVERTEMP_ERR 0x80000001
+
+/* main configuration offset - byte offset */
+#define MAIN_SIGNATURE_OFFSET 0x00 /* DWORD 0x00 */
+#define MAIN_INTERFACE_REVISION 0x04 /* DWORD 0x01 */
+#define MAIN_FW_REVISION 0x08 /* DWORD 0x02 */
+#define MAIN_MAX_OUTSTANDING_IO_OFFSET 0x0C /* DWORD 0x03 */
+#define MAIN_MAX_SGL_OFFSET 0x10 /* DWORD 0x04 */
+#define MAIN_CNTRL_CAP_OFFSET 0x14 /* DWORD 0x05 */
+#define MAIN_GST_OFFSET 0x18 /* DWORD 0x06 */
+#define MAIN_IBQ_OFFSET 0x1C /* DWORD 0x07 */
+#define MAIN_OBQ_OFFSET 0x20 /* DWORD 0x08 */
+#define MAIN_IQNPPD_HPPD_OFFSET 0x24 /* DWORD 0x09 */
+
+/* 0x28 - 0x4C - RSVD */
+#define MAIN_EVENT_CRC_CHECK 0x48 /* DWORD 0x12 */
+#define MAIN_EVENT_LOG_ADDR_HI 0x50 /* DWORD 0x14 */
+#define MAIN_EVENT_LOG_ADDR_LO 0x54 /* DWORD 0x15 */
+#define MAIN_EVENT_LOG_BUFF_SIZE 0x58 /* DWORD 0x16 */
+#define MAIN_EVENT_LOG_OPTION 0x5C /* DWORD 0x17 */
+#define MAIN_PCS_EVENT_LOG_ADDR_HI 0x60 /* DWORD 0x18 */
+#define MAIN_PCS_EVENT_LOG_ADDR_LO 0x64 /* DWORD 0x19 */
+#define MAIN_PCS_EVENT_LOG_BUFF_SIZE 0x68 /* DWORD 0x1A */
+#define MAIN_PCS_EVENT_LOG_OPTION 0x6C /* DWORD 0x1B */
+#define MAIN_FATAL_ERROR_INTERRUPT 0x70 /* DWORD 0x1C */
+#define MAIN_FATAL_ERROR_RDUMP0_OFFSET 0x74 /* DWORD 0x1D */
+#define MAIN_FATAL_ERROR_RDUMP0_LENGTH 0x78 /* DWORD 0x1E */
+#define MAIN_FATAL_ERROR_RDUMP1_OFFSET 0x7C /* DWORD 0x1F */
+#define MAIN_FATAL_ERROR_RDUMP1_LENGTH 0x80 /* DWORD 0x20 */
+#define MAIN_GPIO_LED_FLAGS_OFFSET 0x84 /* DWORD 0x21 */
+#define MAIN_ANALOG_SETUP_OFFSET 0x88 /* DWORD 0x22 */
+
+#define MAIN_INT_VECTOR_TABLE_OFFSET 0x8C /* DWORD 0x23 */
+#define MAIN_SAS_PHY_ATTR_TABLE_OFFSET 0x90 /* DWORD 0x24 */
+#define MAIN_PORT_RECOVERY_TIMER 0x94 /* DWORD 0x25 */
+#define MAIN_INT_REASSERTION_DELAY 0x98 /* DWORD 0x26 */
+#define MAIN_MPI_ILA_RELEASE_TYPE 0xA4 /* DWORD 0x29 */
+#define MAIN_MPI_INACTIVE_FW_VERSION 0XB0 /* DWORD 0x2C */
+
+/* Gereral Status Table offset - byte offset */
+#define GST_GSTLEN_MPIS_OFFSET 0x00
+#define GST_IQ_FREEZE_STATE0_OFFSET 0x04
+#define GST_IQ_FREEZE_STATE1_OFFSET 0x08
+#define GST_MSGUTCNT_OFFSET 0x0C
+#define GST_IOPTCNT_OFFSET 0x10
+/* 0x14 - 0x34 - RSVD */
+#define GST_GPIO_INPUT_VAL 0x38
+/* 0x3c - 0x40 - RSVD */
+#define GST_RERRINFO_OFFSET0 0x44
+#define GST_RERRINFO_OFFSET1 0x48
+#define GST_RERRINFO_OFFSET2 0x4c
+#define GST_RERRINFO_OFFSET3 0x50
+#define GST_RERRINFO_OFFSET4 0x54
+#define GST_RERRINFO_OFFSET5 0x58
+#define GST_RERRINFO_OFFSET6 0x5c
+#define GST_RERRINFO_OFFSET7 0x60
+
+/* General Status Table - MPI state */
+#define GST_MPI_STATE_UNINIT 0x00
+#define GST_MPI_STATE_INIT 0x01
+#define GST_MPI_STATE_TERMINATION 0x02
+#define GST_MPI_STATE_ERROR 0x03
+#define GST_MPI_STATE_MASK 0x07
+
+/* Per SAS PHY Attributes */
+
+#define PSPA_PHYSTATE0_OFFSET 0x00 /* Dword V */
+#define PSPA_OB_HW_EVENT_PID0_OFFSET 0x04 /* DWORD V+1 */
+#define PSPA_PHYSTATE1_OFFSET 0x08 /* Dword V+2 */
+#define PSPA_OB_HW_EVENT_PID1_OFFSET 0x0C /* DWORD V+3 */
+#define PSPA_PHYSTATE2_OFFSET 0x10 /* Dword V+4 */
+#define PSPA_OB_HW_EVENT_PID2_OFFSET 0x14 /* DWORD V+5 */
+#define PSPA_PHYSTATE3_OFFSET 0x18 /* Dword V+6 */
+#define PSPA_OB_HW_EVENT_PID3_OFFSET 0x1C /* DWORD V+7 */
+#define PSPA_PHYSTATE4_OFFSET 0x20 /* Dword V+8 */
+#define PSPA_OB_HW_EVENT_PID4_OFFSET 0x24 /* DWORD V+9 */
+#define PSPA_PHYSTATE5_OFFSET 0x28 /* Dword V+10 */
+#define PSPA_OB_HW_EVENT_PID5_OFFSET 0x2C /* DWORD V+11 */
+#define PSPA_PHYSTATE6_OFFSET 0x30 /* Dword V+12 */
+#define PSPA_OB_HW_EVENT_PID6_OFFSET 0x34 /* DWORD V+13 */
+#define PSPA_PHYSTATE7_OFFSET 0x38 /* Dword V+14 */
+#define PSPA_OB_HW_EVENT_PID7_OFFSET 0x3C /* DWORD V+15 */
+#define PSPA_PHYSTATE8_OFFSET 0x40 /* DWORD V+16 */
+#define PSPA_OB_HW_EVENT_PID8_OFFSET 0x44 /* DWORD V+17 */
+#define PSPA_PHYSTATE9_OFFSET 0x48 /* DWORD V+18 */
+#define PSPA_OB_HW_EVENT_PID9_OFFSET 0x4C /* DWORD V+19 */
+#define PSPA_PHYSTATE10_OFFSET 0x50 /* DWORD V+20 */
+#define PSPA_OB_HW_EVENT_PID10_OFFSET 0x54 /* DWORD V+21 */
+#define PSPA_PHYSTATE11_OFFSET 0x58 /* DWORD V+22 */
+#define PSPA_OB_HW_EVENT_PID11_OFFSET 0x5C /* DWORD V+23 */
+#define PSPA_PHYSTATE12_OFFSET 0x60 /* DWORD V+24 */
+#define PSPA_OB_HW_EVENT_PID12_OFFSET 0x64 /* DWORD V+25 */
+#define PSPA_PHYSTATE13_OFFSET 0x68 /* DWORD V+26 */
+#define PSPA_OB_HW_EVENT_PID13_OFFSET 0x6c /* DWORD V+27 */
+#define PSPA_PHYSTATE14_OFFSET 0x70 /* DWORD V+28 */
+#define PSPA_OB_HW_EVENT_PID14_OFFSET 0x74 /* DWORD V+29 */
+#define PSPA_PHYSTATE15_OFFSET 0x78 /* DWORD V+30 */
+#define PSPA_OB_HW_EVENT_PID15_OFFSET 0x7c /* DWORD V+31 */
+/* end PSPA */
+
+/* inbound queue configuration offset - byte offset */
+#define IB_PROPERITY_OFFSET 0x00
+#define IB_BASE_ADDR_HI_OFFSET 0x04
+#define IB_BASE_ADDR_LO_OFFSET 0x08
+#define IB_CI_BASE_ADDR_HI_OFFSET 0x0C
+#define IB_CI_BASE_ADDR_LO_OFFSET 0x10
+#define IB_PIPCI_BAR 0x14
+#define IB_PIPCI_BAR_OFFSET 0x18
+#define IB_RESERVED_OFFSET 0x1C
+
+/* outbound queue configuration offset - byte offset */
+#define OB_PROPERITY_OFFSET 0x00
+#define OB_BASE_ADDR_HI_OFFSET 0x04
+#define OB_BASE_ADDR_LO_OFFSET 0x08
+#define OB_PI_BASE_ADDR_HI_OFFSET 0x0C
+#define OB_PI_BASE_ADDR_LO_OFFSET 0x10
+#define OB_CIPCI_BAR 0x14
+#define OB_CIPCI_BAR_OFFSET 0x18
+#define OB_INTERRUPT_COALES_OFFSET 0x1C
+#define OB_DYNAMIC_COALES_OFFSET 0x20
+#define OB_PROPERTY_INT_ENABLE 0x40000000
+
+#define MBIC_NMI_ENABLE_VPE0_IOP 0x000418
+#define MBIC_NMI_ENABLE_VPE0_AAP1 0x000418
+/* PCIE registers - BAR2(0x18), BAR1(win) 0x010000 */
+#define PCIE_EVENT_INTERRUPT_ENABLE 0x003040
+#define PCIE_EVENT_INTERRUPT 0x003044
+#define PCIE_ERROR_INTERRUPT_ENABLE 0x003048
+#define PCIE_ERROR_INTERRUPT 0x00304C
+
+/* SPCV soft reset */
+#define SPC_REG_SOFT_RESET 0x00001000
+#define SPCv_NORMAL_RESET_VALUE 0x1
+
+#define SPCv_SOFT_RESET_READ_MASK 0xC0
+#define SPCv_SOFT_RESET_NO_RESET 0x0
+#define SPCv_SOFT_RESET_NORMAL_RESET_OCCURED 0x40
+#define SPCv_SOFT_RESET_HDA_MODE_OCCURED 0x80
+#define SPCv_SOFT_RESET_CHIP_RESET_OCCURED 0xC0
+
+/* signature definition for host scratch pad0 register */
+#define SPC_SOFT_RESET_SIGNATURE 0x252acbcd
+/* Signature for Soft Reset */
+
+/* SPC Reset register - BAR4(0x20), BAR2(win) (need dynamic mapping) */
+#define SPC_REG_RESET 0x000000/* reset register */
+
+/* bit definition for SPC_RESET register */
+#define SPC_REG_RESET_OSSP 0x00000001
+#define SPC_REG_RESET_RAAE 0x00000002
+#define SPC_REG_RESET_PCS_SPBC 0x00000004
+#define SPC_REG_RESET_PCS_IOP_SS 0x00000008
+#define SPC_REG_RESET_PCS_AAP1_SS 0x00000010
+#define SPC_REG_RESET_PCS_AAP2_SS 0x00000020
+#define SPC_REG_RESET_PCS_LM 0x00000040
+#define SPC_REG_RESET_PCS 0x00000080
+#define SPC_REG_RESET_GSM 0x00000100
+#define SPC_REG_RESET_DDR2 0x00010000
+#define SPC_REG_RESET_BDMA_CORE 0x00020000
+#define SPC_REG_RESET_BDMA_SXCBI 0x00040000
+#define SPC_REG_RESET_PCIE_AL_SXCBI 0x00080000
+#define SPC_REG_RESET_PCIE_PWR 0x00100000
+#define SPC_REG_RESET_PCIE_SFT 0x00200000
+#define SPC_REG_RESET_PCS_SXCBI 0x00400000
+#define SPC_REG_RESET_LMS_SXCBI 0x00800000
+#define SPC_REG_RESET_PMIC_SXCBI 0x01000000
+#define SPC_REG_RESET_PMIC_CORE 0x02000000
+#define SPC_REG_RESET_PCIE_PC_SXCBI 0x04000000
+#define SPC_REG_RESET_DEVICE 0x80000000
+
+/* registers for BAR Shifting - BAR2(0x18), BAR1(win) */
+#define SPCV_IBW_AXI_TRANSLATION_LOW 0x001010
+
+#define MBIC_AAP1_ADDR_BASE 0x060000
+#define MBIC_IOP_ADDR_BASE 0x070000
+#define GSM_ADDR_BASE 0x0700000
+/* Dynamic map through Bar4 - 0x00700000 */
+#define GSM_CONFIG_RESET 0x00000000
+#define RAM_ECC_DB_ERR 0x00000018
+#define GSM_READ_ADDR_PARITY_INDIC 0x00000058
+#define GSM_WRITE_ADDR_PARITY_INDIC 0x00000060
+#define GSM_WRITE_DATA_PARITY_INDIC 0x00000068
+#define GSM_READ_ADDR_PARITY_CHECK 0x00000038
+#define GSM_WRITE_ADDR_PARITY_CHECK 0x00000040
+#define GSM_WRITE_DATA_PARITY_CHECK 0x00000048
+
+#define RB6_ACCESS_REG 0x6A0000
+#define HDAC_EXEC_CMD 0x0002
+#define HDA_C_PA 0xcb
+#define HDA_SEQ_ID_BITS 0x00ff0000
+#define HDA_GSM_OFFSET_BITS 0x00FFFFFF
+#define HDA_GSM_CMD_OFFSET_BITS 0x42C0
+#define HDA_GSM_RSP_OFFSET_BITS 0x42E0
+
+#define MBIC_AAP1_ADDR_BASE 0x060000
+#define MBIC_IOP_ADDR_BASE 0x070000
+#define GSM_ADDR_BASE 0x0700000
+#define SPC_TOP_LEVEL_ADDR_BASE 0x000000
+#define GSM_CONFIG_RESET_VALUE 0x00003b00
+#define GPIO_ADDR_BASE 0x00090000
+#define GPIO_GPIO_0_0UTPUT_CTL_OFFSET 0x0000010c
+
+/* RB6 offset */
+#define SPC_RB6_OFFSET 0x80C0
+/* Magic number of soft reset for RB6 */
+#define RB6_MAGIC_NUMBER_RST 0x1234
+
+/* Device Register status */
+#define DEVREG_SUCCESS 0x00
+#define DEVREG_FAILURE_OUT_OF_RESOURCE 0x01
+#define DEVREG_FAILURE_DEVICE_ALREADY_REGISTERED 0x02
+#define DEVREG_FAILURE_INVALID_PHY_ID 0x03
+#define DEVREG_FAILURE_PHY_ID_ALREADY_REGISTERED 0x04
+#define DEVREG_FAILURE_PORT_ID_OUT_OF_RANGE 0x05
+#define DEVREG_FAILURE_PORT_NOT_VALID_STATE 0x06
+#define DEVREG_FAILURE_DEVICE_TYPE_NOT_VALID 0x07
+
+
+#define MEMBASE_II_SHIFT_REGISTER 0x1010
+#endif
+
+/**
+ * As we know sleep (1~20) ms may result in sleep longer than ~20 ms, hence we
+ * choose 20 ms interval.
+ */
+#define FW_READY_INTERVAL 20
diff --git a/drivers/scsi/pm8001/pm80xx_tracepoints.c b/drivers/scsi/pm8001/pm80xx_tracepoints.c
new file mode 100644
index 0000000000..344aface9c
--- /dev/null
+++ b/drivers/scsi/pm8001/pm80xx_tracepoints.c
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Trace events in pm8001 driver.
+ *
+ * Copyright 2020 Google LLC
+ * Author: Akshat Jain <akshatzen@google.com>
+ */
+
+#define CREATE_TRACE_POINTS
+#include "pm80xx_tracepoints.h"
diff --git a/drivers/scsi/pm8001/pm80xx_tracepoints.h b/drivers/scsi/pm8001/pm80xx_tracepoints.h
new file mode 100644
index 0000000000..5e669a8a93
--- /dev/null
+++ b/drivers/scsi/pm8001/pm80xx_tracepoints.h
@@ -0,0 +1,113 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Trace events in pm8001 driver.
+ *
+ * Copyright 2020 Google LLC
+ * Author: Akshat Jain <akshatzen@google.com>
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM pm80xx
+
+#if !defined(_TRACE_PM80XX_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_PM80XX_H
+
+#include <linux/tracepoint.h>
+#include "pm8001_sas.h"
+
+TRACE_EVENT(pm80xx_request_issue,
+ TP_PROTO(u32 id, u32 phy_id, u32 htag, u32 ctlr_opcode,
+ u16 ata_opcode, int running_req),
+
+ TP_ARGS(id, phy_id, htag, ctlr_opcode, ata_opcode, running_req),
+
+ TP_STRUCT__entry(
+ __field(u32, id)
+ __field(u32, phy_id)
+ __field(u32, htag)
+ __field(u32, ctlr_opcode)
+ __field(u16, ata_opcode)
+ __field(int, running_req)
+ ),
+
+ TP_fast_assign(
+ __entry->id = id;
+ __entry->phy_id = phy_id;
+ __entry->htag = htag;
+ __entry->ctlr_opcode = ctlr_opcode;
+ __entry->ata_opcode = ata_opcode;
+ __entry->running_req = running_req;
+ ),
+
+ TP_printk("ctlr_id = %u phy_id = %u htag = %#x, ctlr_opcode = %#x ata_opcode = %#x running_req = %d",
+ __entry->id, __entry->phy_id, __entry->htag,
+ __entry->ctlr_opcode, __entry->ata_opcode,
+ __entry->running_req)
+);
+
+TRACE_EVENT(pm80xx_request_complete,
+ TP_PROTO(u32 id, u32 phy_id, u32 htag, u32 ctlr_opcode,
+ u16 ata_opcode, int running_req),
+
+ TP_ARGS(id, phy_id, htag, ctlr_opcode, ata_opcode, running_req),
+
+ TP_STRUCT__entry(
+ __field(u32, id)
+ __field(u32, phy_id)
+ __field(u32, htag)
+ __field(u32, ctlr_opcode)
+ __field(u16, ata_opcode)
+ __field(int, running_req)
+ ),
+
+ TP_fast_assign(
+ __entry->id = id;
+ __entry->phy_id = phy_id;
+ __entry->htag = htag;
+ __entry->ctlr_opcode = ctlr_opcode;
+ __entry->ata_opcode = ata_opcode;
+ __entry->running_req = running_req;
+ ),
+
+ TP_printk("ctlr_id = %u phy_id = %u htag = %#x, ctlr_opcode = %#x ata_opcode = %#x running_req = %d",
+ __entry->id, __entry->phy_id, __entry->htag,
+ __entry->ctlr_opcode, __entry->ata_opcode,
+ __entry->running_req)
+);
+
+TRACE_EVENT(pm80xx_mpi_build_cmd,
+ TP_PROTO(u32 id, u32 opc, u32 htag, u32 qi, u32 pi, u32 ci),
+
+ TP_ARGS(id, opc, htag, qi, pi, ci),
+
+ TP_STRUCT__entry(
+ __field(u32, id)
+ __field(u32, opc)
+ __field(u32, htag)
+ __field(u32, qi)
+ __field(u32, pi)
+ __field(u32, ci)
+ ),
+
+ TP_fast_assign(
+ __entry->id = id;
+ __entry->opc = opc;
+ __entry->htag = htag;
+ __entry->qi = qi;
+ __entry->pi = pi;
+ __entry->ci = ci;
+ ),
+
+ TP_printk("ctlr_id = %u opc = %#x htag = %#x QI = %u PI = %u CI = %u",
+ __entry->id, __entry->opc, __entry->htag, __entry->qi,
+ __entry->pi, __entry->ci)
+);
+
+#endif /* _TRACE_PM80XX_H_ */
+
+#undef TRACE_INCLUDE_PATH
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE pm80xx_tracepoints
+
+#include <trace/define_trace.h>