diff options
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_fw.h')
| -rw-r--r-- | drivers/scsi/qla2xxx/qla_fw.h | 2287 |
1 files changed, 2287 insertions, 0 deletions
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h new file mode 100644 index 0000000000..f307beed9d --- /dev/null +++ b/drivers/scsi/qla2xxx/qla_fw.h @@ -0,0 +1,2287 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * QLogic Fibre Channel HBA Driver + * Copyright (c) 2003-2014 QLogic Corporation + */ +#ifndef __QLA_FW_H +#define __QLA_FW_H + +#include <linux/nvme.h> +#include <linux/nvme-fc.h> + +#include "qla_dsd.h" + +#define MBS_CHECKSUM_ERROR 0x4010 +#define MBS_INVALID_PRODUCT_KEY 0x4020 + +/* + * Firmware Options. + */ +#define FO1_ENABLE_PUREX BIT_10 +#define FO1_DISABLE_LED_CTRL BIT_6 +#define FO1_ENABLE_8016 BIT_0 +#define FO2_ENABLE_SEL_CLASS2 BIT_5 +#define FO3_NO_ABTS_ON_LINKDOWN BIT_14 +#define FO3_HOLD_STS_IOCB BIT_12 + +/* + * Port Database structure definition for ISP 24xx. + */ +#define PDO_FORCE_ADISC BIT_1 +#define PDO_FORCE_PLOGI BIT_0 + +struct buffer_credit_24xx { + u32 parameter[28]; +}; + +#define PORT_DATABASE_24XX_SIZE 64 +struct port_database_24xx { + uint16_t flags; +#define PDF_TASK_RETRY_ID BIT_14 +#define PDF_FC_TAPE BIT_7 +#define PDF_ACK0_CAPABLE BIT_6 +#define PDF_FCP2_CONF BIT_5 +#define PDF_CLASS_2 BIT_4 +#define PDF_HARD_ADDR BIT_1 + + /* + * for NVMe, the login_state field has been + * split into nibbles. + * The lower nibble is for FCP. + * The upper nibble is for NVMe. + */ + uint8_t current_login_state; + uint8_t last_login_state; +#define PDS_PLOGI_PENDING 0x03 +#define PDS_PLOGI_COMPLETE 0x04 +#define PDS_PRLI_PENDING 0x05 +#define PDS_PRLI_COMPLETE 0x06 +#define PDS_PORT_UNAVAILABLE 0x07 +#define PDS_PRLO_PENDING 0x09 +#define PDS_LOGO_PENDING 0x11 +#define PDS_PRLI2_PENDING 0x12 + + uint8_t hard_address[3]; + uint8_t reserved_1; + + uint8_t port_id[3]; + uint8_t sequence_id; + + uint16_t port_timer; + + uint16_t nport_handle; /* N_PORT handle. */ + + uint16_t receive_data_size; + uint16_t reserved_2; + + uint8_t prli_svc_param_word_0[2]; /* Big endian */ + /* Bits 15-0 of word 0 */ + uint8_t prli_svc_param_word_3[2]; /* Big endian */ + /* Bits 15-0 of word 3 */ + + uint8_t port_name[WWN_SIZE]; + uint8_t node_name[WWN_SIZE]; + + uint8_t reserved_3[2]; + uint16_t nvme_first_burst_size; + uint16_t prli_nvme_svc_param_word_0; /* Bits 15-0 of word 0 */ + uint16_t prli_nvme_svc_param_word_3; /* Bits 15-0 of word 3 */ + uint8_t secure_login; + uint8_t reserved_4[14]; +}; + +/* + * MB 75h returns a list of DB entries similar to port_database_24xx(64B). + * However, in this case it returns 1st 40 bytes. + */ +struct get_name_list_extended { + __le16 flags; + u8 current_login_state; + u8 last_login_state; + u8 hard_address[3]; + u8 reserved_1; + u8 port_id[3]; + u8 sequence_id; + __le16 port_timer; + __le16 nport_handle; /* N_PORT handle. */ + __le16 receive_data_size; + __le16 reserved_2; + + /* PRLI SVC Param are Big endian */ + u8 prli_svc_param_word_0[2]; /* Bits 15-0 of word 0 */ + u8 prli_svc_param_word_3[2]; /* Bits 15-0 of word 3 */ + u8 port_name[WWN_SIZE]; + u8 node_name[WWN_SIZE]; +}; + +/* MB 75h: This is the short version of the database */ +struct get_name_list { + u8 port_node_name[WWN_SIZE]; /* B7 most sig, B0 least sig */ + __le16 nport_handle; + u8 reserved; +}; + +struct vp_database_24xx { + uint16_t vp_status; + uint8_t options; + uint8_t id; + uint8_t port_name[WWN_SIZE]; + uint8_t node_name[WWN_SIZE]; + uint16_t port_id_low; + uint16_t port_id_high; +}; + +struct nvram_24xx { + /* NVRAM header. */ + uint8_t id[4]; + __le16 nvram_version; + uint16_t reserved_0; + + /* Firmware Initialization Control Block. */ + __le16 version; + uint16_t reserved_1; + __le16 frame_payload_size; + __le16 execution_throttle; + __le16 exchange_count; + __le16 hard_address; + + uint8_t port_name[WWN_SIZE]; + uint8_t node_name[WWN_SIZE]; + + __le16 login_retry_count; + __le16 link_down_on_nos; + __le16 interrupt_delay_timer; + __le16 login_timeout; + + __le32 firmware_options_1; + __le32 firmware_options_2; + __le32 firmware_options_3; + + /* Offset 56. */ + + /* + * BIT 0 = Control Enable + * BIT 1-15 = + * + * BIT 0-7 = Reserved + * BIT 8-10 = Output Swing 1G + * BIT 11-13 = Output Emphasis 1G + * BIT 14-15 = Reserved + * + * BIT 0-7 = Reserved + * BIT 8-10 = Output Swing 2G + * BIT 11-13 = Output Emphasis 2G + * BIT 14-15 = Reserved + * + * BIT 0-7 = Reserved + * BIT 8-10 = Output Swing 4G + * BIT 11-13 = Output Emphasis 4G + * BIT 14-15 = Reserved + */ + __le16 seriallink_options[4]; + + uint16_t reserved_2[16]; + + /* Offset 96. */ + uint16_t reserved_3[16]; + + /* PCIe table entries. */ + uint16_t reserved_4[16]; + + /* Offset 160. */ + uint16_t reserved_5[16]; + + /* Offset 192. */ + uint16_t reserved_6[16]; + + /* Offset 224. */ + uint16_t reserved_7[16]; + + /* + * BIT 0 = Enable spinup delay + * BIT 1 = Disable BIOS + * BIT 2 = Enable Memory Map BIOS + * BIT 3 = Enable Selectable Boot + * BIT 4 = Disable RISC code load + * BIT 5 = Disable Serdes + * BIT 6 = + * BIT 7 = + * + * BIT 8 = + * BIT 9 = + * BIT 10 = Enable lip full login + * BIT 11 = Enable target reset + * BIT 12 = + * BIT 13 = + * BIT 14 = + * BIT 15 = Enable alternate WWN + * + * BIT 16-31 = + */ + __le32 host_p; + + uint8_t alternate_port_name[WWN_SIZE]; + uint8_t alternate_node_name[WWN_SIZE]; + + uint8_t boot_port_name[WWN_SIZE]; + __le16 boot_lun_number; + uint16_t reserved_8; + + uint8_t alt1_boot_port_name[WWN_SIZE]; + __le16 alt1_boot_lun_number; + uint16_t reserved_9; + + uint8_t alt2_boot_port_name[WWN_SIZE]; + __le16 alt2_boot_lun_number; + uint16_t reserved_10; + + uint8_t alt3_boot_port_name[WWN_SIZE]; + __le16 alt3_boot_lun_number; + uint16_t reserved_11; + + /* + * BIT 0 = Selective Login + * BIT 1 = Alt-Boot Enable + * BIT 2 = Reserved + * BIT 3 = Boot Order List + * BIT 4 = Reserved + * BIT 5 = Selective LUN + * BIT 6 = Reserved + * BIT 7-31 = + */ + __le32 efi_parameters; + + uint8_t reset_delay; + uint8_t reserved_12; + uint16_t reserved_13; + + __le16 boot_id_number; + uint16_t reserved_14; + + __le16 max_luns_per_target; + uint16_t reserved_15; + + __le16 port_down_retry_count; + __le16 link_down_timeout; + + /* FCode parameters. */ + __le16 fcode_parameter; + + uint16_t reserved_16[3]; + + /* Offset 352. */ + uint8_t prev_drv_ver_major; + uint8_t prev_drv_ver_submajob; + uint8_t prev_drv_ver_minor; + uint8_t prev_drv_ver_subminor; + + __le16 prev_bios_ver_major; + __le16 prev_bios_ver_minor; + + __le16 prev_efi_ver_major; + __le16 prev_efi_ver_minor; + + __le16 prev_fw_ver_major; + uint8_t prev_fw_ver_minor; + uint8_t prev_fw_ver_subminor; + + uint16_t reserved_17[8]; + + /* Offset 384. */ + uint16_t reserved_18[16]; + + /* Offset 416. */ + uint16_t reserved_19[16]; + + /* Offset 448. */ + uint16_t reserved_20[16]; + + /* Offset 480. */ + uint8_t model_name[16]; + + uint16_t reserved_21[2]; + + /* Offset 500. */ + /* HW Parameter Block. */ + uint16_t pcie_table_sig; + uint16_t pcie_table_offset; + + uint16_t subsystem_vendor_id; + uint16_t subsystem_device_id; + + __le32 checksum; +}; + +/* + * ISP Initialization Control Block. + * Little endian except where noted. + */ +#define ICB_VERSION 1 +struct init_cb_24xx { + __le16 version; + uint16_t reserved_1; + + __le16 frame_payload_size; + __le16 execution_throttle; + __le16 exchange_count; + + __le16 hard_address; + + uint8_t port_name[WWN_SIZE]; /* Big endian. */ + uint8_t node_name[WWN_SIZE]; /* Big endian. */ + + __le16 response_q_inpointer; + __le16 request_q_outpointer; + + __le16 login_retry_count; + + __le16 prio_request_q_outpointer; + + __le16 response_q_length; + __le16 request_q_length; + + __le16 link_down_on_nos; /* Milliseconds. */ + + __le16 prio_request_q_length; + + __le64 request_q_address __packed; + __le64 response_q_address __packed; + __le64 prio_request_q_address __packed; + + __le16 msix; + __le16 msix_atio; + uint8_t reserved_2[4]; + + __le16 atio_q_inpointer; + __le16 atio_q_length; + __le64 atio_q_address __packed; + + __le16 interrupt_delay_timer; /* 100us increments. */ + __le16 login_timeout; + + /* + * BIT 0 = Enable Hard Loop Id + * BIT 1 = Enable Fairness + * BIT 2 = Enable Full-Duplex + * BIT 3 = Reserved + * BIT 4 = Enable Target Mode + * BIT 5 = Disable Initiator Mode + * BIT 6 = Acquire FA-WWN + * BIT 7 = Enable D-port Diagnostics + * + * BIT 8 = Reserved + * BIT 9 = Non Participating LIP + * BIT 10 = Descending Loop ID Search + * BIT 11 = Acquire Loop ID in LIPA + * BIT 12 = Reserved + * BIT 13 = Full Login after LIP + * BIT 14 = Node Name Option + * BIT 15-31 = Reserved + */ + __le32 firmware_options_1; + + /* + * BIT 0 = Operation Mode bit 0 + * BIT 1 = Operation Mode bit 1 + * BIT 2 = Operation Mode bit 2 + * BIT 3 = Operation Mode bit 3 + * BIT 4 = Connection Options bit 0 + * BIT 5 = Connection Options bit 1 + * BIT 6 = Connection Options bit 2 + * BIT 7 = Enable Non part on LIHA failure + * + * BIT 8 = Enable Class 2 + * BIT 9 = Enable ACK0 + * BIT 10 = Reserved + * BIT 11 = Enable FC-SP Security + * BIT 12 = FC Tape Enable + * BIT 13 = Reserved + * BIT 14 = Enable Target PRLI Control + * BIT 15-31 = Reserved + */ + __le32 firmware_options_2; + + /* + * BIT 0 = Reserved + * BIT 1 = Soft ID only + * BIT 2 = Reserved + * BIT 3 = Reserved + * BIT 4 = FCP RSP Payload bit 0 + * BIT 5 = FCP RSP Payload bit 1 + * BIT 6 = Enable Receive Out-of-Order data frame handling + * BIT 7 = Disable Automatic PLOGI on Local Loop + * + * BIT 8 = Reserved + * BIT 9 = Enable Out-of-Order FCP_XFER_RDY relative offset handling + * BIT 10 = Reserved + * BIT 11 = Reserved + * BIT 12 = Reserved + * BIT 13 = Data Rate bit 0 + * BIT 14 = Data Rate bit 1 + * BIT 15 = Data Rate bit 2 + * BIT 16 = Enable 75 ohm Termination Select + * BIT 17-28 = Reserved + * BIT 29 = Enable response queue 0 in index shadowing + * BIT 30 = Enable request queue 0 out index shadowing + * BIT 31 = Reserved + */ + __le32 firmware_options_3; + __le16 qos; + __le16 rid; + uint8_t reserved_3[20]; +}; + +/* + * ISP queue - command entry structure definition. + */ +#define COMMAND_BIDIRECTIONAL 0x75 +struct cmd_bidir { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t sys_define; /* System defined */ + uint8_t entry_status; /* Entry status. */ + + uint32_t handle; /* System handle. */ + + __le16 nport_handle; /* N_PORT handle. */ + + __le16 timeout; /* Command timeout. */ + + __le16 wr_dseg_count; /* Write Data segment count. */ + __le16 rd_dseg_count; /* Read Data segment count. */ + + struct scsi_lun lun; /* FCP LUN (BE). */ + + __le16 control_flags; /* Control flags. */ +#define BD_WRAP_BACK BIT_3 +#define BD_READ_DATA BIT_1 +#define BD_WRITE_DATA BIT_0 + + __le16 fcp_cmnd_dseg_len; /* Data segment length. */ + __le64 fcp_cmnd_dseg_address __packed;/* Data segment address. */ + + uint16_t reserved[2]; /* Reserved */ + + __le32 rd_byte_count; /* Total Byte count Read. */ + __le32 wr_byte_count; /* Total Byte count write. */ + + uint8_t port_id[3]; /* PortID of destination port.*/ + uint8_t vp_index; + + struct dsd64 fcp_dsd; +}; + +#define COMMAND_TYPE_6 0x48 /* Command Type 6 entry */ +struct cmd_type_6 { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t sys_define; /* System defined. */ + uint8_t entry_status; /* Entry Status. */ + + uint32_t handle; /* System handle. */ + + __le16 nport_handle; /* N_PORT handle. */ + __le16 timeout; /* Command timeout. */ + + __le16 dseg_count; /* Data segment count. */ + + __le16 fcp_rsp_dsd_len; /* FCP_RSP DSD length. */ + + struct scsi_lun lun; /* FCP LUN (BE). */ + + __le16 control_flags; /* Control flags. */ +#define CF_NEW_SA BIT_12 +#define CF_EN_EDIF BIT_9 +#define CF_ADDITIONAL_PARAM_BLK BIT_8 +#define CF_DIF_SEG_DESCR_ENABLE BIT_3 +#define CF_DATA_SEG_DESCR_ENABLE BIT_2 +#define CF_READ_DATA BIT_1 +#define CF_WRITE_DATA BIT_0 + + __le16 fcp_cmnd_dseg_len; /* Data segment length. */ + /* Data segment address. */ + __le64 fcp_cmnd_dseg_address __packed; + /* Data segment address. */ + __le64 fcp_rsp_dseg_address __packed; + + __le32 byte_count; /* Total byte count. */ + + uint8_t port_id[3]; /* PortID of destination port. */ + uint8_t vp_index; + + struct dsd64 fcp_dsd; +}; + +#define COMMAND_TYPE_7 0x18 /* Command Type 7 entry */ +struct cmd_type_7 { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t sys_define; /* System defined. */ + uint8_t entry_status; /* Entry Status. */ + + uint32_t handle; /* System handle. */ + + __le16 nport_handle; /* N_PORT handle. */ + __le16 timeout; /* Command timeout. */ +#define FW_MAX_TIMEOUT 0x1999 + + __le16 dseg_count; /* Data segment count. */ + uint16_t reserved_1; + + struct scsi_lun lun; /* FCP LUN (BE). */ + + __le16 task_mgmt_flags; /* Task management flags. */ +#define TMF_CLEAR_ACA BIT_14 +#define TMF_TARGET_RESET BIT_13 +#define TMF_LUN_RESET BIT_12 +#define TMF_CLEAR_TASK_SET BIT_10 +#define TMF_ABORT_TASK_SET BIT_9 +#define TMF_DSD_LIST_ENABLE BIT_2 +#define TMF_READ_DATA BIT_1 +#define TMF_WRITE_DATA BIT_0 + + uint8_t task; +#define TSK_SIMPLE 0 +#define TSK_HEAD_OF_QUEUE 1 +#define TSK_ORDERED 2 +#define TSK_ACA 4 +#define TSK_UNTAGGED 5 + + uint8_t crn; + + uint8_t fcp_cdb[MAX_CMDSZ]; /* SCSI command words. */ + __le32 byte_count; /* Total byte count. */ + + uint8_t port_id[3]; /* PortID of destination port. */ + uint8_t vp_index; + + struct dsd64 dsd; +}; + +#define COMMAND_TYPE_CRC_2 0x6A /* Command Type CRC_2 (Type 6) + * (T10-DIF) */ +struct cmd_type_crc_2 { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t sys_define; /* System defined. */ + uint8_t entry_status; /* Entry Status. */ + + uint32_t handle; /* System handle. */ + + __le16 nport_handle; /* N_PORT handle. */ + __le16 timeout; /* Command timeout. */ + + __le16 dseg_count; /* Data segment count. */ + + __le16 fcp_rsp_dseg_len; /* FCP_RSP DSD length. */ + + struct scsi_lun lun; /* FCP LUN (BE). */ + + __le16 control_flags; /* Control flags. */ + + __le16 fcp_cmnd_dseg_len; /* Data segment length. */ + __le64 fcp_cmnd_dseg_address __packed; + /* Data segment address. */ + __le64 fcp_rsp_dseg_address __packed; + + __le32 byte_count; /* Total byte count. */ + + uint8_t port_id[3]; /* PortID of destination port. */ + uint8_t vp_index; + + __le64 crc_context_address __packed; /* Data segment address. */ + __le16 crc_context_len; /* Data segment length. */ + uint16_t reserved_1; /* MUST be set to 0. */ +}; + + +/* + * ISP queue - status entry structure definition. + */ +#define STATUS_TYPE 0x03 /* Status entry. */ +struct sts_entry_24xx { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t sys_define; /* System defined. */ + uint8_t entry_status; /* Entry Status. */ + + uint32_t handle; /* System handle. */ + + __le16 comp_status; /* Completion status. */ + __le16 ox_id; /* OX_ID used by the firmware. */ + + __le32 residual_len; /* FW calc residual transfer length. */ + + union { + __le16 reserved_1; + __le16 nvme_rsp_pyld_len; + __le16 edif_sa_index; /* edif sa_index used for initiator read data */ + }; + + __le16 state_flags; /* State flags. */ +#define SF_TRANSFERRED_DATA BIT_11 +#define SF_NVME_ERSP BIT_6 +#define SF_FCP_RSP_DMA BIT_0 + + __le16 status_qualifier; + __le16 scsi_status; /* SCSI status. */ +#define SS_CONFIRMATION_REQ BIT_12 + + __le32 rsp_residual_count; /* FCP RSP residual count. */ + + __le32 sense_len; /* FCP SENSE length. */ + + union { + struct { + __le32 rsp_data_len; /* FCP response data length */ + uint8_t data[28]; /* FCP rsp/sense information */ + }; + struct nvme_fc_ersp_iu nvme_ersp; + uint8_t nvme_ersp_data[32]; + }; + + /* + * If DIF Error is set in comp_status, these additional fields are + * defined: + * + * !!! NOTE: Firmware sends expected/actual DIF data in big endian + * format; but all of the "data" field gets swab32-d in the beginning + * of qla2x00_status_entry(). + * + * &data[10] : uint8_t report_runt_bg[2]; - computed guard + * &data[12] : uint8_t actual_dif[8]; - DIF Data received + * &data[20] : uint8_t expected_dif[8]; - DIF Data computed + */ +}; + + +/* + * Status entry completion status + */ +#define CS_DATA_REASSEMBLY_ERROR 0x11 /* Data Reassembly Error.. */ +#define CS_ABTS_BY_TARGET 0x13 /* Target send ABTS to abort IOCB. */ +#define CS_FW_RESOURCE 0x2C /* Firmware Resource Unavailable. */ +#define CS_TASK_MGMT_OVERRUN 0x30 /* Task management overrun (8+). */ +#define CS_ABORT_BY_TARGET 0x47 /* Abort By Target. */ + +/* + * ISP queue - marker entry structure definition. + */ +#define MARKER_TYPE 0x04 /* Marker entry. */ +struct mrk_entry_24xx { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t handle_count; /* Handle count. */ + uint8_t entry_status; /* Entry Status. */ + + uint32_t handle; /* System handle. */ + + __le16 nport_handle; /* N_PORT handle. */ + + uint8_t modifier; /* Modifier (7-0). */ +#define MK_SYNC_ID_LUN 0 /* Synchronize ID/LUN */ +#define MK_SYNC_ID 1 /* Synchronize ID */ +#define MK_SYNC_ALL 2 /* Synchronize all ID/LUN */ + uint8_t reserved_1; + + uint8_t reserved_2; + uint8_t vp_index; + + uint16_t reserved_3; + + uint8_t lun[8]; /* FCP LUN (BE). */ + uint8_t reserved_4[40]; +}; + +/* + * ISP queue - CT Pass-Through entry structure definition. + */ +#define CT_IOCB_TYPE 0x29 /* CT Pass-Through IOCB entry */ +struct ct_entry_24xx { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t sys_define; /* System Defined. */ + uint8_t entry_status; /* Entry Status. */ + + uint32_t handle; /* System handle. */ + + __le16 comp_status; /* Completion status. */ + + __le16 nport_handle; /* N_PORT handle. */ + + __le16 cmd_dsd_count; + + uint8_t vp_index; + uint8_t reserved_1; + + __le16 timeout; /* Command timeout. */ + uint16_t reserved_2; + + __le16 rsp_dsd_count; + + uint8_t reserved_3[10]; + + __le32 rsp_byte_count; + __le32 cmd_byte_count; + + struct dsd64 dsd[2]; +}; + +#define PURX_ELS_HEADER_SIZE 0x18 + +/* + * ISP queue - PUREX IOCB entry structure definition + */ +#define PUREX_IOCB_TYPE 0x51 /* CT Pass Through IOCB entry */ +struct purex_entry_24xx { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t sys_define; /* System defined. */ + uint8_t entry_status; /* Entry Status. */ + + __le16 reserved1; + uint8_t vp_idx; + uint8_t reserved2; + + __le16 status_flags; + __le16 nport_handle; + + __le16 frame_size; + __le16 trunc_frame_size; + + __le32 rx_xchg_addr; + + uint8_t d_id[3]; + uint8_t r_ctl; + + uint8_t s_id[3]; + uint8_t cs_ctl; + + uint8_t f_ctl[3]; + uint8_t type; + + __le16 seq_cnt; + uint8_t df_ctl; + uint8_t seq_id; + + __le16 rx_id; + __le16 ox_id; + __le32 param; + + uint8_t els_frame_payload[20]; +}; + +/* + * ISP queue - ELS Pass-Through entry structure definition. + */ +#define ELS_IOCB_TYPE 0x53 /* ELS Pass-Through IOCB entry */ +struct els_entry_24xx { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t sys_define; /* System Defined. */ + uint8_t entry_status; /* Entry Status. */ + + uint32_t handle; /* System handle. */ + + __le16 comp_status; /* response only */ + __le16 nport_handle; + + __le16 tx_dsd_count; + + uint8_t vp_index; + uint8_t sof_type; +#define EST_SOFI3 (1 << 4) +#define EST_SOFI2 (3 << 4) + + __le32 rx_xchg_address; /* Receive exchange address. */ + __le16 rx_dsd_count; + + uint8_t opcode; + uint8_t reserved_2; + + uint8_t d_id[3]; + uint8_t s_id[3]; + + __le16 control_flags; /* Control flags. */ +#define ECF_PAYLOAD_DESCR_MASK (BIT_15|BIT_14|BIT_13) +#define EPD_ELS_COMMAND (0 << 13) +#define EPD_ELS_ACC (1 << 13) +#define EPD_ELS_RJT (2 << 13) +#define EPD_RX_XCHG (3 << 13) /* terminate exchange */ +#define ECF_CLR_PASSTHRU_PEND BIT_12 +#define ECF_INCL_FRAME_HDR BIT_11 +#define ECF_SEC_LOGIN BIT_3 + + union { + struct { + __le32 rx_byte_count; + __le32 tx_byte_count; + + __le64 tx_address __packed; /* DSD 0 address. */ + __le32 tx_len; /* DSD 0 length. */ + + __le64 rx_address __packed; /* DSD 1 address. */ + __le32 rx_len; /* DSD 1 length. */ + }; + struct { + __le32 total_byte_count; + __le32 error_subcode_1; + __le32 error_subcode_2; + __le32 error_subcode_3; + }; + }; +}; + +struct els_sts_entry_24xx { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t sys_define; /* System Defined. */ + uint8_t entry_status; /* Entry Status. */ + + __le32 handle; /* System handle. */ + + __le16 comp_status; + + __le16 nport_handle; /* N_PORT handle. */ + + __le16 reserved_1; + + uint8_t vp_index; + uint8_t sof_type; + + __le32 rx_xchg_address; /* Receive exchange address. */ + __le16 reserved_2; + + uint8_t opcode; + uint8_t reserved_3; + + uint8_t d_id[3]; + uint8_t s_id[3]; + + __le16 control_flags; /* Control flags. */ + __le32 total_byte_count; + __le32 error_subcode_1; + __le32 error_subcode_2; + __le32 error_subcode_3; + + __le32 reserved_4[4]; +}; +/* + * ISP queue - Mailbox Command entry structure definition. + */ +#define MBX_IOCB_TYPE 0x39 +struct mbx_entry_24xx { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t handle_count; /* Handle count. */ + uint8_t entry_status; /* Entry Status. */ + + uint32_t handle; /* System handle. */ + + uint16_t mbx[28]; +}; + + +#define LOGINOUT_PORT_IOCB_TYPE 0x52 /* Login/Logout Port entry. */ +struct logio_entry_24xx { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t sys_define; /* System defined. */ + uint8_t entry_status; /* Entry Status. */ + + uint32_t handle; /* System handle. */ + + __le16 comp_status; /* Completion status. */ +#define CS_LOGIO_ERROR 0x31 /* Login/Logout IOCB error. */ + + __le16 nport_handle; /* N_PORT handle. */ + + __le16 control_flags; /* Control flags. */ + /* Modifiers. */ +#define LCF_INCLUDE_SNS BIT_10 /* Include SNS (FFFFFC) during LOGO. */ +#define LCF_FCP2_OVERRIDE BIT_9 /* Set/Reset word 3 of PRLI. */ +#define LCF_CLASS_2 BIT_8 /* Enable class 2 during PLOGI. */ +#define LCF_FREE_NPORT BIT_7 /* Release NPORT handle after LOGO. */ +#define LCF_COMMON_FEAT BIT_7 /* PLOGI - Set Common Features Field */ +#define LCF_EXPL_LOGO BIT_6 /* Perform an explicit LOGO. */ +#define LCF_NVME_PRLI BIT_6 /* Perform NVME FC4 PRLI */ +#define LCF_SKIP_PRLI BIT_5 /* Skip PRLI after PLOGI. */ +#define LCF_IMPL_LOGO_ALL BIT_5 /* Implicit LOGO to all ports. */ +#define LCF_COND_PLOGI BIT_4 /* PLOGI only if not logged-in. */ +#define LCF_IMPL_LOGO BIT_4 /* Perform an implicit LOGO. */ +#define LCF_IMPL_PRLO BIT_4 /* Perform an implicit PRLO. */ + /* Commands. */ +#define LCF_COMMAND_PLOGI 0x00 /* PLOGI. */ +#define LCF_COMMAND_PRLI 0x01 /* PRLI. */ +#define LCF_COMMAND_PDISC 0x02 /* PDISC. */ +#define LCF_COMMAND_ADISC 0x03 /* ADISC. */ +#define LCF_COMMAND_LOGO 0x08 /* LOGO. */ +#define LCF_COMMAND_PRLO 0x09 /* PRLO. */ +#define LCF_COMMAND_TPRLO 0x0A /* TPRLO. */ + + uint8_t vp_index; + uint8_t reserved_1; + + uint8_t port_id[3]; /* PortID of destination port. */ + + uint8_t rsp_size; /* Response size in 32bit words. */ + + __le32 io_parameter[11]; /* General I/O parameters. */ +#define LIO_COMM_FEAT_FCSP BIT_21 +#define LIO_COMM_FEAT_CIO BIT_31 +#define LSC_SCODE_NOLINK 0x01 +#define LSC_SCODE_NOIOCB 0x02 +#define LSC_SCODE_NOXCB 0x03 +#define LSC_SCODE_CMD_FAILED 0x04 +#define LSC_SCODE_NOFABRIC 0x05 +#define LSC_SCODE_FW_NOT_READY 0x07 +#define LSC_SCODE_NOT_LOGGED_IN 0x09 +#define LSC_SCODE_NOPCB 0x0A + +#define LSC_SCODE_ELS_REJECT 0x18 +#define LSC_SCODE_CMD_PARAM_ERR 0x19 +#define LSC_SCODE_PORTID_USED 0x1A +#define LSC_SCODE_NPORT_USED 0x1B +#define LSC_SCODE_NONPORT 0x1C +#define LSC_SCODE_LOGGED_IN 0x1D +#define LSC_SCODE_NOFLOGI_ACC 0x1F +}; + +#define TSK_MGMT_IOCB_TYPE 0x14 +struct tsk_mgmt_entry { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t handle_count; /* Handle count. */ + uint8_t entry_status; /* Entry Status. */ + + uint32_t handle; /* System handle. */ + + __le16 nport_handle; /* N_PORT handle. */ + + uint16_t reserved_1; + + __le16 delay; /* Activity delay in seconds. */ + + __le16 timeout; /* Command timeout. */ + + struct scsi_lun lun; /* FCP LUN (BE). */ + + __le32 control_flags; /* Control Flags. */ +#define TCF_NOTMCMD_TO_TARGET BIT_31 +#define TCF_LUN_RESET BIT_4 +#define TCF_ABORT_TASK_SET BIT_3 +#define TCF_CLEAR_TASK_SET BIT_2 +#define TCF_TARGET_RESET BIT_1 +#define TCF_CLEAR_ACA BIT_0 + + uint8_t reserved_2[20]; + + uint8_t port_id[3]; /* PortID of destination port. */ + uint8_t vp_index; + + uint8_t reserved_3[12]; +}; + +#define ABORT_IOCB_TYPE 0x33 +struct abort_entry_24xx { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t handle_count; /* Handle count. */ + uint8_t entry_status; /* Entry Status. */ + + uint32_t handle; /* System handle. */ + + union { + __le16 nport_handle; /* N_PORT handle. */ + __le16 comp_status; /* Completion status. */ + }; + + __le16 options; /* Options. */ +#define AOF_NO_ABTS BIT_0 /* Do not send any ABTS. */ +#define AOF_NO_RRQ BIT_1 /* Do not send RRQ. */ +#define AOF_ABTS_TIMEOUT BIT_2 /* Disable logout on ABTS timeout. */ +#define AOF_ABTS_RTY_CNT BIT_3 /* Use driver specified retry count. */ +#define AOF_RSP_TIMEOUT BIT_4 /* Use specified response timeout. */ + + + uint32_t handle_to_abort; /* System handle to abort. */ + + __le16 req_que_no; + uint8_t reserved_1[30]; + + uint8_t port_id[3]; /* PortID of destination port. */ + uint8_t vp_index; + u8 reserved_2[4]; + union { + struct { + __le16 abts_rty_cnt; + __le16 rsp_timeout; + } drv; + struct { + u8 ba_rjt_vendorUnique; + u8 ba_rjt_reasonCodeExpl; + u8 ba_rjt_reasonCode; + u8 reserved_3; + } fw; + }; + u8 reserved_4[4]; +}; + +#define ABTS_RCV_TYPE 0x54 +#define ABTS_RSP_TYPE 0x55 +struct abts_entry_24xx { + uint8_t entry_type; + uint8_t entry_count; + uint8_t handle_count; + uint8_t entry_status; + + __le32 handle; /* type 0x55 only */ + + __le16 comp_status; /* type 0x55 only */ + __le16 nport_handle; /* type 0x54 only */ + + __le16 control_flags; /* type 0x55 only */ + uint8_t vp_idx; + uint8_t sof_type; /* sof_type is upper nibble */ + + __le32 rx_xch_addr; + + uint8_t d_id[3]; + uint8_t r_ctl; + + uint8_t s_id[3]; + uint8_t cs_ctl; + + uint8_t f_ctl[3]; + uint8_t type; + + __le16 seq_cnt; + uint8_t df_ctl; + uint8_t seq_id; + + __le16 rx_id; + __le16 ox_id; + + __le32 param; + + union { + struct { + __le32 subcode3; + __le32 rsvd; + __le32 subcode1; + __le32 subcode2; + } error; + struct { + __le16 rsrvd1; + uint8_t last_seq_id; + uint8_t seq_id_valid; + __le16 aborted_rx_id; + __le16 aborted_ox_id; + __le16 high_seq_cnt; + __le16 low_seq_cnt; + } ba_acc; + struct { + uint8_t vendor_unique; + uint8_t explanation; + uint8_t reason; + } ba_rjt; + } payload; + + __le32 rx_xch_addr_to_abort; +} __packed; + +/* ABTS payload explanation values */ +#define BA_RJT_EXP_NO_ADDITIONAL 0 +#define BA_RJT_EXP_INV_OX_RX_ID 3 +#define BA_RJT_EXP_SEQ_ABORTED 5 + +/* ABTS payload reason values */ +#define BA_RJT_RSN_INV_CMD_CODE 1 +#define BA_RJT_RSN_LOGICAL_ERROR 3 +#define BA_RJT_RSN_LOGICAL_BUSY 5 +#define BA_RJT_RSN_PROTOCOL_ERROR 7 +#define BA_RJT_RSN_UNABLE_TO_PERFORM 9 +#define BA_RJT_RSN_VENDOR_SPECIFIC 0xff + +/* FC_F values */ +#define FC_TYPE_BLD 0x000 /* Basic link data */ +#define FC_F_CTL_RSP_CNTXT 0x800000 /* Responder of exchange */ +#define FC_F_CTL_LAST_SEQ 0x100000 /* Last sequence */ +#define FC_F_CTL_END_SEQ 0x80000 /* Last sequence */ +#define FC_F_CTL_SEQ_INIT 0x010000 /* Sequence initiative */ +#define FC_ROUTING_BLD 0x80 /* Basic link data frame */ +#define FC_R_CTL_BLD_BA_ACC 0x04 /* BA_ACC (basic accept) */ + +/* + * ISP I/O Register Set structure definitions. + */ +struct device_reg_24xx { + __le32 flash_addr; /* Flash/NVRAM BIOS address. */ +#define FARX_DATA_FLAG BIT_31 +#define FARX_ACCESS_FLASH_CONF 0x7FFD0000 +#define FARX_ACCESS_FLASH_DATA 0x7FF00000 +#define FARX_ACCESS_NVRAM_CONF 0x7FFF0000 +#define FARX_ACCESS_NVRAM_DATA 0x7FFE0000 + +#define FA_NVRAM_FUNC0_ADDR 0x80 +#define FA_NVRAM_FUNC1_ADDR 0x180 + +#define FA_NVRAM_VPD_SIZE 0x200 +#define FA_NVRAM_VPD0_ADDR 0x00 +#define FA_NVRAM_VPD1_ADDR 0x100 + +#define FA_BOOT_CODE_ADDR 0x00000 + /* + * RISC code begins at offset 512KB + * within flash. Consisting of two + * contiguous RISC code segments. + */ +#define FA_RISC_CODE_ADDR 0x20000 +#define FA_RISC_CODE_SEGMENTS 2 + +#define FA_FLASH_DESCR_ADDR_24 0x11000 +#define FA_FLASH_LAYOUT_ADDR_24 0x11400 +#define FA_NPIV_CONF0_ADDR_24 0x16000 +#define FA_NPIV_CONF1_ADDR_24 0x17000 + +#define FA_FW_AREA_ADDR 0x40000 +#define FA_VPD_NVRAM_ADDR 0x48000 +#define FA_FEATURE_ADDR 0x4C000 +#define FA_FLASH_DESCR_ADDR 0x50000 +#define FA_FLASH_LAYOUT_ADDR 0x50400 +#define FA_HW_EVENT0_ADDR 0x54000 +#define FA_HW_EVENT1_ADDR 0x54400 +#define FA_HW_EVENT_SIZE 0x200 +#define FA_HW_EVENT_ENTRY_SIZE 4 +#define FA_NPIV_CONF0_ADDR 0x5C000 +#define FA_NPIV_CONF1_ADDR 0x5D000 +#define FA_FCP_PRIO0_ADDR 0x10000 +#define FA_FCP_PRIO1_ADDR 0x12000 + +/* + * Flash Error Log Event Codes. + */ +#define HW_EVENT_RESET_ERR 0xF00B +#define HW_EVENT_ISP_ERR 0xF020 +#define HW_EVENT_PARITY_ERR 0xF022 +#define HW_EVENT_NVRAM_CHKSUM_ERR 0xF023 +#define HW_EVENT_FLASH_FW_ERR 0xF024 + + __le32 flash_data; /* Flash/NVRAM BIOS data. */ + + __le32 ctrl_status; /* Control/Status. */ +#define CSRX_FLASH_ACCESS_ERROR BIT_18 /* Flash/NVRAM Access Error. */ +#define CSRX_DMA_ACTIVE BIT_17 /* DMA Active status. */ +#define CSRX_DMA_SHUTDOWN BIT_16 /* DMA Shutdown control status. */ +#define CSRX_FUNCTION BIT_15 /* Function number. */ + /* PCI-X Bus Mode. */ +#define CSRX_PCIX_BUS_MODE_MASK (BIT_11|BIT_10|BIT_9|BIT_8) +#define PBM_PCI_33MHZ (0 << 8) +#define PBM_PCIX_M1_66MHZ (1 << 8) +#define PBM_PCIX_M1_100MHZ (2 << 8) +#define PBM_PCIX_M1_133MHZ (3 << 8) +#define PBM_PCIX_M2_66MHZ (5 << 8) +#define PBM_PCIX_M2_100MHZ (6 << 8) +#define PBM_PCIX_M2_133MHZ (7 << 8) +#define PBM_PCI_66MHZ (8 << 8) + /* Max Write Burst byte count. */ +#define CSRX_MAX_WRT_BURST_MASK (BIT_5|BIT_4) +#define MWB_512_BYTES (0 << 4) +#define MWB_1024_BYTES (1 << 4) +#define MWB_2048_BYTES (2 << 4) +#define MWB_4096_BYTES (3 << 4) + +#define CSRX_64BIT_SLOT BIT_2 /* PCI 64-Bit Bus Slot. */ +#define CSRX_FLASH_ENABLE BIT_1 /* Flash BIOS Read/Write enable. */ +#define CSRX_ISP_SOFT_RESET BIT_0 /* ISP soft reset. */ + + __le32 ictrl; /* Interrupt control. */ +#define ICRX_EN_RISC_INT BIT_3 /* Enable RISC interrupts on PCI. */ + + __le32 istatus; /* Interrupt status. */ +#define ISRX_RISC_INT BIT_3 /* RISC interrupt. */ + + __le32 unused_1[2]; /* Gap. */ + + /* Request Queue. */ + __le32 req_q_in; /* In-Pointer. */ + __le32 req_q_out; /* Out-Pointer. */ + /* Response Queue. */ + __le32 rsp_q_in; /* In-Pointer. */ + __le32 rsp_q_out; /* Out-Pointer. */ + /* Priority Request Queue. */ + __le32 preq_q_in; /* In-Pointer. */ + __le32 preq_q_out; /* Out-Pointer. */ + + __le32 unused_2[2]; /* Gap. */ + + /* ATIO Queue. */ + __le32 atio_q_in; /* In-Pointer. */ + __le32 atio_q_out; /* Out-Pointer. */ + + __le32 host_status; +#define HSRX_RISC_INT BIT_15 /* RISC to Host interrupt. */ +#define HSRX_RISC_PAUSED BIT_8 /* RISC Paused. */ + + __le32 hccr; /* Host command & control register. */ + /* HCCR statuses. */ +#define HCCRX_HOST_INT BIT_6 /* Host to RISC interrupt bit. */ +#define HCCRX_RISC_RESET BIT_5 /* RISC Reset mode bit. */ + /* HCCR commands. */ + /* NOOP. */ +#define HCCRX_NOOP 0x00000000 + /* Set RISC Reset. */ +#define HCCRX_SET_RISC_RESET 0x10000000 + /* Clear RISC Reset. */ +#define HCCRX_CLR_RISC_RESET 0x20000000 + /* Set RISC Pause. */ +#define HCCRX_SET_RISC_PAUSE 0x30000000 + /* Releases RISC Pause. */ +#define HCCRX_REL_RISC_PAUSE 0x40000000 + /* Set HOST to RISC interrupt. */ +#define HCCRX_SET_HOST_INT 0x50000000 + /* Clear HOST to RISC interrupt. */ +#define HCCRX_CLR_HOST_INT 0x60000000 + /* Clear RISC to PCI interrupt. */ +#define HCCRX_CLR_RISC_INT 0xA0000000 + + __le32 gpiod; /* GPIO Data register. */ + + /* LED update mask. */ +#define GPDX_LED_UPDATE_MASK (BIT_20|BIT_19|BIT_18) + /* Data update mask. */ +#define GPDX_DATA_UPDATE_MASK (BIT_17|BIT_16) + /* Data update mask. */ +#define GPDX_DATA_UPDATE_2_MASK (BIT_28|BIT_27|BIT_26|BIT_17|BIT_16) + /* LED control mask. */ +#define GPDX_LED_COLOR_MASK (BIT_4|BIT_3|BIT_2) + /* LED bit values. Color names as + * referenced in fw spec. + */ +#define GPDX_LED_YELLOW_ON BIT_2 +#define GPDX_LED_GREEN_ON BIT_3 +#define GPDX_LED_AMBER_ON BIT_4 + /* Data in/out. */ +#define GPDX_DATA_INOUT (BIT_1|BIT_0) + + __le32 gpioe; /* GPIO Enable register. */ + /* Enable update mask. */ +#define GPEX_ENABLE_UPDATE_MASK (BIT_17|BIT_16) + /* Enable update mask. */ +#define GPEX_ENABLE_UPDATE_2_MASK (BIT_28|BIT_27|BIT_26|BIT_17|BIT_16) + /* Enable. */ +#define GPEX_ENABLE (BIT_1|BIT_0) + + __le32 iobase_addr; /* I/O Bus Base Address register. */ + + __le32 unused_3[10]; /* Gap. */ + + __le16 mailbox0; + __le16 mailbox1; + __le16 mailbox2; + __le16 mailbox3; + __le16 mailbox4; + __le16 mailbox5; + __le16 mailbox6; + __le16 mailbox7; + __le16 mailbox8; + __le16 mailbox9; + __le16 mailbox10; + __le16 mailbox11; + __le16 mailbox12; + __le16 mailbox13; + __le16 mailbox14; + __le16 mailbox15; + __le16 mailbox16; + __le16 mailbox17; + __le16 mailbox18; + __le16 mailbox19; + __le16 mailbox20; + __le16 mailbox21; + __le16 mailbox22; + __le16 mailbox23; + __le16 mailbox24; + __le16 mailbox25; + __le16 mailbox26; + __le16 mailbox27; + __le16 mailbox28; + __le16 mailbox29; + __le16 mailbox30; + __le16 mailbox31; + + __le32 iobase_window; + __le32 iobase_c4; + __le32 iobase_c8; + __le32 unused_4_1[6]; /* Gap. */ + __le32 iobase_q; + __le32 unused_5[2]; /* Gap. */ + __le32 iobase_select; + __le32 unused_6[2]; /* Gap. */ + __le32 iobase_sdata; +}; +/* RISC-RISC semaphore register PCI offet */ +#define RISC_REGISTER_BASE_OFFSET 0x7010 +#define RISC_REGISTER_WINDOW_OFFSET 0x6 + +/* RISC-RISC semaphore/flag register (risc address 0x7016) */ + +#define RISC_SEMAPHORE 0x1UL +#define RISC_SEMAPHORE_WE (RISC_SEMAPHORE << 16) +#define RISC_SEMAPHORE_CLR (RISC_SEMAPHORE_WE | 0x0UL) +#define RISC_SEMAPHORE_SET (RISC_SEMAPHORE_WE | RISC_SEMAPHORE) + +#define RISC_SEMAPHORE_FORCE 0x8000UL +#define RISC_SEMAPHORE_FORCE_WE (RISC_SEMAPHORE_FORCE << 16) +#define RISC_SEMAPHORE_FORCE_CLR (RISC_SEMAPHORE_FORCE_WE | 0x0UL) +#define RISC_SEMAPHORE_FORCE_SET \ + (RISC_SEMAPHORE_FORCE_WE | RISC_SEMAPHORE_FORCE) + +/* RISC semaphore timeouts (ms) */ +#define TIMEOUT_SEMAPHORE 2500 +#define TIMEOUT_SEMAPHORE_FORCE 2000 +#define TIMEOUT_TOTAL_ELAPSED 4500 + +/* Trace Control *************************************************************/ + +#define TC_AEN_DISABLE 0 + +#define TC_EFT_ENABLE 4 +#define TC_EFT_DISABLE 5 + +#define TC_FCE_ENABLE 8 +#define TC_FCE_OPTIONS 0 +#define TC_FCE_DEFAULT_RX_SIZE 2112 +#define TC_FCE_DEFAULT_TX_SIZE 2112 +#define TC_FCE_DISABLE 9 +#define TC_FCE_DISABLE_TRACE BIT_0 + +/* MID Support ***************************************************************/ + +#define MIN_MULTI_ID_FABRIC 64 /* Must be power-of-2. */ +#define MAX_MULTI_ID_FABRIC 256 /* ... */ + +struct mid_conf_entry_24xx { + uint16_t reserved_1; + + /* + * BIT 0 = Enable Hard Loop Id + * BIT 1 = Acquire Loop ID in LIPA + * BIT 2 = ID not Acquired + * BIT 3 = Enable VP + * BIT 4 = Enable Initiator Mode + * BIT 5 = Disable Target Mode + * BIT 6-7 = Reserved + */ + uint8_t options; + + uint8_t hard_address; + + uint8_t port_name[WWN_SIZE]; + uint8_t node_name[WWN_SIZE]; +}; + +struct mid_init_cb_24xx { + struct init_cb_24xx init_cb; + + __le16 count; + __le16 options; + + struct mid_conf_entry_24xx entries[MAX_MULTI_ID_FABRIC]; +}; + + +struct mid_db_entry_24xx { + uint16_t status; +#define MDBS_NON_PARTIC BIT_3 +#define MDBS_ID_ACQUIRED BIT_1 +#define MDBS_ENABLED BIT_0 + + uint8_t options; + uint8_t hard_address; + + uint8_t port_name[WWN_SIZE]; + uint8_t node_name[WWN_SIZE]; + + uint8_t port_id[3]; + uint8_t reserved_1; +}; + +/* + * Virtual Port Control IOCB + */ +#define VP_CTRL_IOCB_TYPE 0x30 /* Virtual Port Control entry. */ +struct vp_ctrl_entry_24xx { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t sys_define; /* System defined. */ + uint8_t entry_status; /* Entry Status. */ + + uint32_t handle; /* System handle. */ + + __le16 vp_idx_failed; + + __le16 comp_status; /* Completion status. */ +#define CS_VCE_IOCB_ERROR 0x01 /* Error processing IOCB */ +#define CS_VCE_ACQ_ID_ERROR 0x02 /* Error while acquireing ID. */ +#define CS_VCE_BUSY 0x05 /* Firmware not ready to accept cmd. */ + + __le16 command; +#define VCE_COMMAND_ENABLE_VPS 0x00 /* Enable VPs. */ +#define VCE_COMMAND_DISABLE_VPS 0x08 /* Disable VPs. */ +#define VCE_COMMAND_DISABLE_VPS_REINIT 0x09 /* Disable VPs and reinit link. */ +#define VCE_COMMAND_DISABLE_VPS_LOGO 0x0a /* Disable VPs and LOGO ports. */ +#define VCE_COMMAND_DISABLE_VPS_LOGO_ALL 0x0b /* Disable VPs and LOGO ports. */ + + __le16 vp_count; + + uint8_t vp_idx_map[16]; + __le16 flags; + __le16 id; + uint16_t reserved_4; + __le16 hopct; + uint8_t reserved_5[24]; +}; + +/* + * Modify Virtual Port Configuration IOCB + */ +#define VP_CONFIG_IOCB_TYPE 0x31 /* Virtual Port Config entry. */ +struct vp_config_entry_24xx { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t handle_count; + uint8_t entry_status; /* Entry Status. */ + + uint32_t handle; /* System handle. */ + + __le16 flags; +#define CS_VF_BIND_VPORTS_TO_VF BIT_0 +#define CS_VF_SET_QOS_OF_VPORTS BIT_1 +#define CS_VF_SET_HOPS_OF_VPORTS BIT_2 + + __le16 comp_status; /* Completion status. */ +#define CS_VCT_STS_ERROR 0x01 /* Specified VPs were not disabled. */ +#define CS_VCT_CNT_ERROR 0x02 /* Invalid VP count. */ +#define CS_VCT_ERROR 0x03 /* Unknown error. */ +#define CS_VCT_IDX_ERROR 0x02 /* Invalid VP index. */ +#define CS_VCT_BUSY 0x05 /* Firmware not ready to accept cmd. */ + + uint8_t command; +#define VCT_COMMAND_MOD_VPS 0x00 /* Modify VP configurations. */ +#define VCT_COMMAND_MOD_ENABLE_VPS 0x01 /* Modify configuration & enable VPs. */ + + uint8_t vp_count; + + uint8_t vp_index1; + uint8_t vp_index2; + + uint8_t options_idx1; + uint8_t hard_address_idx1; + uint16_t reserved_vp1; + uint8_t port_name_idx1[WWN_SIZE]; + uint8_t node_name_idx1[WWN_SIZE]; + + uint8_t options_idx2; + uint8_t hard_address_idx2; + uint16_t reserved_vp2; + uint8_t port_name_idx2[WWN_SIZE]; + uint8_t node_name_idx2[WWN_SIZE]; + __le16 id; + uint16_t reserved_4; + __le16 hopct; + uint8_t reserved_5[2]; +}; + +#define VP_RPT_ID_IOCB_TYPE 0x32 /* Report ID Acquisition entry. */ +enum VP_STATUS { + VP_STAT_COMPL, + VP_STAT_FAIL, + VP_STAT_ID_CHG, + VP_STAT_SNS_TO, /* timeout */ + VP_STAT_SNS_RJT, + VP_STAT_SCR_TO, /* timeout */ + VP_STAT_SCR_RJT, +}; + +enum VP_FLAGS { + VP_FLAGS_CON_FLOOP = 1, + VP_FLAGS_CON_P2P = 2, + VP_FLAGS_CON_FABRIC = 3, + VP_FLAGS_NAME_VALID = BIT_5, +}; + +struct vp_rpt_id_entry_24xx { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t sys_define; /* System defined. */ + uint8_t entry_status; /* Entry Status. */ + __le32 resv1; + uint8_t vp_acquired; + uint8_t vp_setup; + uint8_t vp_idx; /* Format 0=reserved */ + uint8_t vp_status; /* Format 0=reserved */ + + uint8_t port_id[3]; + uint8_t format; + union { + struct _f0 { + /* format 0 loop */ + uint8_t vp_idx_map[16]; + uint8_t reserved_4[32]; + } f0; + struct _f1 { + /* format 1 fabric */ + uint8_t vpstat1_subcode; /* vp_status=1 subcode */ + uint8_t flags; +#define TOPO_MASK 0xE +#define TOPO_FL 0x2 +#define TOPO_N2N 0x4 +#define TOPO_F 0x6 + + uint16_t fip_flags; + uint8_t rsv2[12]; + + uint8_t ls_rjt_vendor; + uint8_t ls_rjt_explanation; + uint8_t ls_rjt_reason; + uint8_t rsv3[5]; + + uint8_t port_name[8]; + uint8_t node_name[8]; + uint16_t bbcr; + uint8_t reserved_5[6]; + } f1; + struct _f2 { /* format 2: N2N direct connect */ + uint8_t vpstat1_subcode; + uint8_t flags; + uint16_t fip_flags; + uint8_t rsv2[12]; + + uint8_t ls_rjt_vendor; + uint8_t ls_rjt_explanation; + uint8_t ls_rjt_reason; + uint8_t rsv3[5]; + + uint8_t port_name[8]; + uint8_t node_name[8]; + uint16_t bbcr; + uint8_t reserved_5[2]; + uint8_t remote_nport_id[4]; + } f2; + } u; +}; + +#define VF_EVFP_IOCB_TYPE 0x26 /* Exchange Virtual Fabric Parameters entry. */ +struct vf_evfp_entry_24xx { + uint8_t entry_type; /* Entry type. */ + uint8_t entry_count; /* Entry count. */ + uint8_t sys_define; /* System defined. */ + uint8_t entry_status; /* Entry Status. */ + + uint32_t handle; /* System handle. */ + __le16 comp_status; /* Completion status. */ + __le16 timeout; /* timeout */ + __le16 adim_tagging_mode; + + __le16 vfport_id; + uint32_t exch_addr; + + __le16 nport_handle; /* N_PORT handle. */ + __le16 control_flags; + uint32_t io_parameter_0; + uint32_t io_parameter_1; + __le64 tx_address __packed; /* Data segment 0 address. */ + uint32_t tx_len; /* Data segment 0 length. */ + __le64 rx_address __packed; /* Data segment 1 address. */ + uint32_t rx_len; /* Data segment 1 length. */ +}; + +/* END MID Support ***********************************************************/ + +/* Flash Description Table ***************************************************/ + +struct qla_fdt_layout { + uint8_t sig[4]; + __le16 version; + __le16 len; + __le16 checksum; + uint8_t unused1[2]; + uint8_t model[16]; + __le16 man_id; + __le16 id; + uint8_t flags; + uint8_t erase_cmd; + uint8_t alt_erase_cmd; + uint8_t wrt_enable_cmd; + uint8_t wrt_enable_bits; + uint8_t wrt_sts_reg_cmd; + uint8_t unprotect_sec_cmd; + uint8_t read_man_id_cmd; + __le32 block_size; + __le32 alt_block_size; + __le32 flash_size; + __le32 wrt_enable_data; + uint8_t read_id_addr_len; + uint8_t wrt_disable_bits; + uint8_t read_dev_id_len; + uint8_t chip_erase_cmd; + __le16 read_timeout; + uint8_t protect_sec_cmd; + uint8_t unused2[65]; +}; + +/* Flash Layout Table ********************************************************/ + +struct qla_flt_location { + uint8_t sig[4]; + __le16 start_lo; + __le16 start_hi; + uint8_t version; + uint8_t unused[5]; + __le16 checksum; +}; + +#define FLT_REG_FW 0x01 +#define FLT_REG_BOOT_CODE 0x07 +#define FLT_REG_VPD_0 0x14 +#define FLT_REG_NVRAM_0 0x15 +#define FLT_REG_VPD_1 0x16 +#define FLT_REG_NVRAM_1 0x17 +#define FLT_REG_VPD_2 0xD4 +#define FLT_REG_NVRAM_2 0xD5 +#define FLT_REG_VPD_3 0xD6 +#define FLT_REG_NVRAM_3 0xD7 +#define FLT_REG_FDT 0x1a +#define FLT_REG_FLT 0x1c +#define FLT_REG_HW_EVENT_0 0x1d +#define FLT_REG_HW_EVENT_1 0x1f +#define FLT_REG_NPIV_CONF_0 0x29 +#define FLT_REG_NPIV_CONF_1 0x2a +#define FLT_REG_GOLD_FW 0x2f +#define FLT_REG_FCP_PRIO_0 0x87 +#define FLT_REG_FCP_PRIO_1 0x88 +#define FLT_REG_CNA_FW 0x97 +#define FLT_REG_BOOT_CODE_8044 0xA2 +#define FLT_REG_FCOE_FW 0xA4 +#define FLT_REG_FCOE_NVRAM_0 0xAA +#define FLT_REG_FCOE_NVRAM_1 0xAC + +/* 27xx */ +#define FLT_REG_IMG_PRI_27XX 0x95 +#define FLT_REG_IMG_SEC_27XX 0x96 +#define FLT_REG_FW_SEC_27XX 0x02 +#define FLT_REG_BOOTLOAD_SEC_27XX 0x9 +#define FLT_REG_VPD_SEC_27XX_0 0x50 +#define FLT_REG_VPD_SEC_27XX_1 0x52 +#define FLT_REG_VPD_SEC_27XX_2 0xD8 +#define FLT_REG_VPD_SEC_27XX_3 0xDA +#define FLT_REG_NVME_PARAMS_27XX 0x21 + +/* 28xx */ +#define FLT_REG_AUX_IMG_PRI_28XX 0x125 +#define FLT_REG_AUX_IMG_SEC_28XX 0x126 +#define FLT_REG_VPD_SEC_28XX_0 0x10C +#define FLT_REG_VPD_SEC_28XX_1 0x10E +#define FLT_REG_VPD_SEC_28XX_2 0x110 +#define FLT_REG_VPD_SEC_28XX_3 0x112 +#define FLT_REG_NVRAM_SEC_28XX_0 0x10D +#define FLT_REG_NVRAM_SEC_28XX_1 0x10F +#define FLT_REG_NVRAM_SEC_28XX_2 0x111 +#define FLT_REG_NVRAM_SEC_28XX_3 0x113 +#define FLT_REG_MPI_PRI_28XX 0xD3 +#define FLT_REG_MPI_SEC_28XX 0xF0 +#define FLT_REG_PEP_PRI_28XX 0xD1 +#define FLT_REG_PEP_SEC_28XX 0xF1 +#define FLT_REG_NVME_PARAMS_PRI_28XX 0x14E +#define FLT_REG_NVME_PARAMS_SEC_28XX 0x179 + +struct qla_flt_region { + __le16 code; + uint8_t attribute; + uint8_t reserved; + __le32 size; + __le32 start; + __le32 end; +}; + +struct qla_flt_header { + __le16 version; + __le16 length; + __le16 checksum; + __le16 unused; + struct qla_flt_region region[]; +}; + +#define FLT_REGION_SIZE 16 +#define FLT_MAX_REGIONS 0xFF +#define FLT_REGIONS_SIZE (FLT_REGION_SIZE * FLT_MAX_REGIONS) + +/* Flash NPIV Configuration Table ********************************************/ + +struct qla_npiv_header { + uint8_t sig[2]; + __le16 version; + __le16 entries; + __le16 unused[4]; + __le16 checksum; +}; + +struct qla_npiv_entry { + __le16 flags; + __le16 vf_id; + uint8_t q_qos; + uint8_t f_qos; + __le16 unused1; + uint8_t port_name[WWN_SIZE]; + uint8_t node_name[WWN_SIZE]; +}; + +/* 84XX Support **************************************************************/ + +#define MBA_ISP84XX_ALERT 0x800f /* Alert Notification. */ +#define A84_PANIC_RECOVERY 0x1 +#define A84_OP_LOGIN_COMPLETE 0x2 +#define A84_DIAG_LOGIN_COMPLETE 0x3 +#define A84_GOLD_LOGIN_COMPLETE 0x4 + +#define MBC_ISP84XX_RESET 0x3a /* Reset. */ + +#define FSTATE_REMOTE_FC_DOWN BIT_0 +#define FSTATE_NSL_LINK_DOWN BIT_1 +#define FSTATE_IS_DIAG_FW BIT_2 +#define FSTATE_LOGGED_IN BIT_3 +#define FSTATE_WAITING_FOR_VERIFY BIT_4 + +#define VERIFY_CHIP_IOCB_TYPE 0x1B +struct verify_chip_entry_84xx { + uint8_t entry_type; + uint8_t entry_count; + uint8_t sys_defined; + uint8_t entry_status; + + uint32_t handle; + + __le16 options; +#define VCO_DONT_UPDATE_FW BIT_0 +#define VCO_FORCE_UPDATE BIT_1 +#define VCO_DONT_RESET_UPDATE BIT_2 +#define VCO_DIAG_FW BIT_3 +#define VCO_END_OF_DATA BIT_14 +#define VCO_ENABLE_DSD BIT_15 + + __le16 reserved_1; + + __le16 data_seg_cnt; + __le16 reserved_2[3]; + + __le32 fw_ver; + __le32 exchange_address; + + __le32 reserved_3[3]; + __le32 fw_size; + __le32 fw_seq_size; + __le32 relative_offset; + + struct dsd64 dsd; +}; + +struct verify_chip_rsp_84xx { + uint8_t entry_type; + uint8_t entry_count; + uint8_t sys_defined; + uint8_t entry_status; + + uint32_t handle; + + __le16 comp_status; +#define CS_VCS_CHIP_FAILURE 0x3 +#define CS_VCS_BAD_EXCHANGE 0x8 +#define CS_VCS_SEQ_COMPLETEi 0x40 + + __le16 failure_code; +#define VFC_CHECKSUM_ERROR 0x1 +#define VFC_INVALID_LEN 0x2 +#define VFC_ALREADY_IN_PROGRESS 0x8 + + __le16 reserved_1[4]; + + __le32 fw_ver; + __le32 exchange_address; + + __le32 reserved_2[6]; +}; + +#define ACCESS_CHIP_IOCB_TYPE 0x2B +struct access_chip_84xx { + uint8_t entry_type; + uint8_t entry_count; + uint8_t sys_defined; + uint8_t entry_status; + + uint32_t handle; + + __le16 options; +#define ACO_DUMP_MEMORY 0x0 +#define ACO_LOAD_MEMORY 0x1 +#define ACO_CHANGE_CONFIG_PARAM 0x2 +#define ACO_REQUEST_INFO 0x3 + + __le16 reserved1; + + __le16 dseg_count; + __le16 reserved2[3]; + + __le32 parameter1; + __le32 parameter2; + __le32 parameter3; + + __le32 reserved3[3]; + __le32 total_byte_cnt; + __le32 reserved4; + + struct dsd64 dsd; +}; + +struct access_chip_rsp_84xx { + uint8_t entry_type; + uint8_t entry_count; + uint8_t sys_defined; + uint8_t entry_status; + + uint32_t handle; + + __le16 comp_status; + __le16 failure_code; + __le32 residual_count; + + __le32 reserved[12]; +}; + +/* 81XX Support **************************************************************/ + +#define MBA_DCBX_START 0x8016 +#define MBA_DCBX_COMPLETE 0x8030 +#define MBA_FCF_CONF_ERR 0x8031 +#define MBA_DCBX_PARAM_UPDATE 0x8032 +#define MBA_IDC_COMPLETE 0x8100 +#define MBA_IDC_NOTIFY 0x8101 +#define MBA_IDC_TIME_EXT 0x8102 + +#define MBC_IDC_ACK 0x101 +#define MBC_RESTART_MPI_FW 0x3d +#define MBC_FLASH_ACCESS_CTRL 0x3e /* Control flash access. */ +#define MBC_GET_XGMAC_STATS 0x7a +#define MBC_GET_DCBX_PARAMS 0x51 + +/* + * ISP83xx mailbox commands + */ +#define MBC_WRITE_REMOTE_REG 0x0001 /* Write remote register */ +#define MBC_READ_REMOTE_REG 0x0009 /* Read remote register */ +#define MBC_RESTART_NIC_FIRMWARE 0x003d /* Restart NIC firmware */ +#define MBC_SET_ACCESS_CONTROL 0x003e /* Access control command */ + +/* Flash access control option field bit definitions */ +#define FAC_OPT_FORCE_SEMAPHORE BIT_15 +#define FAC_OPT_REQUESTOR_ID BIT_14 +#define FAC_OPT_CMD_SUBCODE 0xff + +/* Flash access control command subcodes */ +#define FAC_OPT_CMD_WRITE_PROTECT 0x00 +#define FAC_OPT_CMD_WRITE_ENABLE 0x01 +#define FAC_OPT_CMD_ERASE_SECTOR 0x02 +#define FAC_OPT_CMD_LOCK_SEMAPHORE 0x03 +#define FAC_OPT_CMD_UNLOCK_SEMAPHORE 0x04 +#define FAC_OPT_CMD_GET_SECTOR_SIZE 0x05 + +/* enhanced features bit definitions */ +#define NEF_LR_DIST_ENABLE BIT_0 + +/* LR Distance bit positions */ +#define LR_DIST_NV_POS 2 +#define LR_DIST_NV_MASK 0xf +#define LR_DIST_FW_POS 12 + +/* FAC semaphore defines */ +#define FAC_SEMAPHORE_UNLOCK 0 +#define FAC_SEMAPHORE_LOCK 1 + +struct nvram_81xx { + /* NVRAM header. */ + uint8_t id[4]; + __le16 nvram_version; + __le16 reserved_0; + + /* Firmware Initialization Control Block. */ + __le16 version; + __le16 reserved_1; + __le16 frame_payload_size; + __le16 execution_throttle; + __le16 exchange_count; + __le16 reserved_2; + + uint8_t port_name[WWN_SIZE]; + uint8_t node_name[WWN_SIZE]; + + __le16 login_retry_count; + __le16 reserved_3; + __le16 interrupt_delay_timer; + __le16 login_timeout; + + __le32 firmware_options_1; + __le32 firmware_options_2; + __le32 firmware_options_3; + + __le16 reserved_4[4]; + + /* Offset 64. */ + uint8_t enode_mac[6]; + __le16 reserved_5[5]; + + /* Offset 80. */ + __le16 reserved_6[24]; + + /* Offset 128. */ + __le16 ex_version; + uint8_t prio_fcf_matching_flags; + uint8_t reserved_6_1[3]; + __le16 pri_fcf_vlan_id; + uint8_t pri_fcf_fabric_name[8]; + __le16 reserved_6_2[7]; + uint8_t spma_mac_addr[6]; + __le16 reserved_6_3[14]; + + /* Offset 192. */ + uint8_t min_supported_speed; + uint8_t reserved_7_0; + __le16 reserved_7[31]; + + /* + * BIT 0 = Enable spinup delay + * BIT 1 = Disable BIOS + * BIT 2 = Enable Memory Map BIOS + * BIT 3 = Enable Selectable Boot + * BIT 4 = Disable RISC code load + * BIT 5 = Disable Serdes + * BIT 6 = Opt boot mode + * BIT 7 = Interrupt enable + * + * BIT 8 = EV Control enable + * BIT 9 = Enable lip reset + * BIT 10 = Enable lip full login + * BIT 11 = Enable target reset + * BIT 12 = Stop firmware + * BIT 13 = Enable nodename option + * BIT 14 = Default WWPN valid + * BIT 15 = Enable alternate WWN + * + * BIT 16 = CLP LUN string + * BIT 17 = CLP Target string + * BIT 18 = CLP BIOS enable string + * BIT 19 = CLP Serdes string + * BIT 20 = CLP WWPN string + * BIT 21 = CLP WWNN string + * BIT 22 = + * BIT 23 = + * BIT 24 = Keep WWPN + * BIT 25 = Temp WWPN + * BIT 26-31 = + */ + __le32 host_p; + + uint8_t alternate_port_name[WWN_SIZE]; + uint8_t alternate_node_name[WWN_SIZE]; + + uint8_t boot_port_name[WWN_SIZE]; + __le16 boot_lun_number; + __le16 reserved_8; + + uint8_t alt1_boot_port_name[WWN_SIZE]; + __le16 alt1_boot_lun_number; + __le16 reserved_9; + + uint8_t alt2_boot_port_name[WWN_SIZE]; + __le16 alt2_boot_lun_number; + __le16 reserved_10; + + uint8_t alt3_boot_port_name[WWN_SIZE]; + __le16 alt3_boot_lun_number; + __le16 reserved_11; + + /* + * BIT 0 = Selective Login + * BIT 1 = Alt-Boot Enable + * BIT 2 = Reserved + * BIT 3 = Boot Order List + * BIT 4 = Reserved + * BIT 5 = Selective LUN + * BIT 6 = Reserved + * BIT 7-31 = + */ + __le32 efi_parameters; + + uint8_t reset_delay; + uint8_t reserved_12; + __le16 reserved_13; + + __le16 boot_id_number; + __le16 reserved_14; + + __le16 max_luns_per_target; + __le16 reserved_15; + + __le16 port_down_retry_count; + __le16 link_down_timeout; + + /* FCode parameters. */ + __le16 fcode_parameter; + + __le16 reserved_16[3]; + + /* Offset 352. */ + uint8_t reserved_17[4]; + __le16 reserved_18[5]; + uint8_t reserved_19[2]; + __le16 reserved_20[8]; + + /* Offset 384. */ + uint8_t reserved_21[16]; + __le16 reserved_22[3]; + + /* Offset 406 (0x196) Enhanced Features + * BIT 0 = Extended BB credits for LR + * BIT 1 = Virtual Fabric Enable + * BIT 2-5 = Distance Support if BIT 0 is on + * BIT 6 = Prefer FCP + * BIT 7 = SCM Disabled if BIT is set (1) + * BIT 8-15 = Unused + */ + uint16_t enhanced_features; + + uint16_t reserved_24[4]; + + /* Offset 416. */ + __le16 reserved_25[32]; + + /* Offset 480. */ + uint8_t model_name[16]; + + /* Offset 496. */ + __le16 feature_mask_l; + __le16 feature_mask_h; + __le16 reserved_26[2]; + + __le16 subsystem_vendor_id; + __le16 subsystem_device_id; + + __le32 checksum; +}; + +/* + * ISP Initialization Control Block. + * Little endian except where noted. + */ +#define ICB_VERSION 1 +struct init_cb_81xx { + __le16 version; + __le16 reserved_1; + + __le16 frame_payload_size; + __le16 execution_throttle; + __le16 exchange_count; + + __le16 reserved_2; + + uint8_t port_name[WWN_SIZE]; /* Big endian. */ + uint8_t node_name[WWN_SIZE]; /* Big endian. */ + + __le16 response_q_inpointer; + __le16 request_q_outpointer; + + __le16 login_retry_count; + + __le16 prio_request_q_outpointer; + + __le16 response_q_length; + __le16 request_q_length; + + __le16 reserved_3; + + __le16 prio_request_q_length; + + __le64 request_q_address __packed; + __le64 response_q_address __packed; + __le64 prio_request_q_address __packed; + + uint8_t reserved_4[8]; + + __le16 atio_q_inpointer; + __le16 atio_q_length; + __le64 atio_q_address __packed; + + __le16 interrupt_delay_timer; /* 100us increments. */ + __le16 login_timeout; + + /* + * BIT 0-3 = Reserved + * BIT 4 = Enable Target Mode + * BIT 5 = Disable Initiator Mode + * BIT 6 = Reserved + * BIT 7 = Reserved + * + * BIT 8-13 = Reserved + * BIT 14 = Node Name Option + * BIT 15-31 = Reserved + */ + __le32 firmware_options_1; + + /* + * BIT 0 = Operation Mode bit 0 + * BIT 1 = Operation Mode bit 1 + * BIT 2 = Operation Mode bit 2 + * BIT 3 = Operation Mode bit 3 + * BIT 4-7 = Reserved + * + * BIT 8 = Enable Class 2 + * BIT 9 = Enable ACK0 + * BIT 10 = Reserved + * BIT 11 = Enable FC-SP Security + * BIT 12 = FC Tape Enable + * BIT 13 = Reserved + * BIT 14 = Enable Target PRLI Control + * BIT 15-31 = Reserved + */ + __le32 firmware_options_2; + + /* + * BIT 0-3 = Reserved + * BIT 4 = FCP RSP Payload bit 0 + * BIT 5 = FCP RSP Payload bit 1 + * BIT 6 = Enable Receive Out-of-Order data frame handling + * BIT 7 = Reserved + * + * BIT 8 = Reserved + * BIT 9 = Enable Out-of-Order FCP_XFER_RDY relative offset handling + * BIT 10-16 = Reserved + * BIT 17 = Enable multiple FCFs + * BIT 18-20 = MAC addressing mode + * BIT 21-25 = Ethernet data rate + * BIT 26 = Enable ethernet header rx IOCB for ATIO q + * BIT 27 = Enable ethernet header rx IOCB for response q + * BIT 28 = SPMA selection bit 0 + * BIT 28 = SPMA selection bit 1 + * BIT 30-31 = Reserved + */ + __le32 firmware_options_3; + + uint8_t reserved_5[8]; + + uint8_t enode_mac[6]; + + uint8_t reserved_6[10]; +}; + +struct mid_init_cb_81xx { + struct init_cb_81xx init_cb; + + uint16_t count; + uint16_t options; + + struct mid_conf_entry_24xx entries[MAX_MULTI_ID_FABRIC]; +}; + +struct ex_init_cb_81xx { + uint16_t ex_version; + uint8_t prio_fcf_matching_flags; + uint8_t reserved_1[3]; + uint16_t pri_fcf_vlan_id; + uint8_t pri_fcf_fabric_name[8]; + uint16_t reserved_2[7]; + uint8_t spma_mac_addr[6]; + uint16_t reserved_3[14]; +}; + +#define FARX_ACCESS_FLASH_CONF_81XX 0x7FFD0000 +#define FARX_ACCESS_FLASH_DATA_81XX 0x7F800000 +#define FARX_ACCESS_FLASH_CONF_28XX 0x7FFD0000 +#define FARX_ACCESS_FLASH_DATA_28XX 0x7F7D0000 + +/* FCP priority config defines *************************************/ +/* operations */ +#define QLFC_FCP_PRIO_DISABLE 0x0 +#define QLFC_FCP_PRIO_ENABLE 0x1 +#define QLFC_FCP_PRIO_GET_CONFIG 0x2 +#define QLFC_FCP_PRIO_SET_CONFIG 0x3 + +struct qla_fcp_prio_entry { + uint16_t flags; /* Describes parameter(s) in FCP */ + /* priority entry that are valid */ +#define FCP_PRIO_ENTRY_VALID 0x1 +#define FCP_PRIO_ENTRY_TAG_VALID 0x2 +#define FCP_PRIO_ENTRY_SPID_VALID 0x4 +#define FCP_PRIO_ENTRY_DPID_VALID 0x8 +#define FCP_PRIO_ENTRY_LUNB_VALID 0x10 +#define FCP_PRIO_ENTRY_LUNE_VALID 0x20 +#define FCP_PRIO_ENTRY_SWWN_VALID 0x40 +#define FCP_PRIO_ENTRY_DWWN_VALID 0x80 + uint8_t tag; /* Priority value */ + uint8_t reserved; /* Reserved for future use */ + uint32_t src_pid; /* Src port id. high order byte */ + /* unused; -1 (wild card) */ + uint32_t dst_pid; /* Src port id. high order byte */ + /* unused; -1 (wild card) */ + uint16_t lun_beg; /* 1st lun num of lun range. */ + /* -1 (wild card) */ + uint16_t lun_end; /* 2nd lun num of lun range. */ + /* -1 (wild card) */ + uint8_t src_wwpn[8]; /* Source WWPN: -1 (wild card) */ + uint8_t dst_wwpn[8]; /* Destination WWPN: -1 (wild card) */ +}; + +struct qla_fcp_prio_cfg { + uint8_t signature[4]; /* "HQOS" signature of config data */ + uint16_t version; /* 1: Initial version */ + uint16_t length; /* config data size in num bytes */ + uint16_t checksum; /* config data bytes checksum */ + uint16_t num_entries; /* Number of entries */ + uint16_t size_of_entry; /* Size of each entry in num bytes */ + uint8_t attributes; /* enable/disable, persistence */ +#define FCP_PRIO_ATTR_DISABLE 0x0 +#define FCP_PRIO_ATTR_ENABLE 0x1 +#define FCP_PRIO_ATTR_PERSIST 0x2 + uint8_t reserved; /* Reserved for future use */ +#define FCP_PRIO_CFG_HDR_SIZE offsetof(struct qla_fcp_prio_cfg, entry) + struct qla_fcp_prio_entry entry[1023]; /* fcp priority entries */ + uint8_t reserved2[16]; +}; + +#define FCP_PRIO_CFG_SIZE (32*1024) /* fcp prio data per port*/ + +/* 25XX Support ****************************************************/ +#define FA_FCP_PRIO0_ADDR_25 0x3C000 +#define FA_FCP_PRIO1_ADDR_25 0x3E000 + +/* 81XX Flash locations -- occupies second 2MB region. */ +#define FA_BOOT_CODE_ADDR_81 0x80000 +#define FA_RISC_CODE_ADDR_81 0xA0000 +#define FA_FW_AREA_ADDR_81 0xC0000 +#define FA_VPD_NVRAM_ADDR_81 0xD0000 +#define FA_VPD0_ADDR_81 0xD0000 +#define FA_VPD1_ADDR_81 0xD0400 +#define FA_NVRAM0_ADDR_81 0xD0080 +#define FA_NVRAM1_ADDR_81 0xD0180 +#define FA_FEATURE_ADDR_81 0xD4000 +#define FA_FLASH_DESCR_ADDR_81 0xD8000 +#define FA_FLASH_LAYOUT_ADDR_81 0xD8400 +#define FA_HW_EVENT0_ADDR_81 0xDC000 +#define FA_HW_EVENT1_ADDR_81 0xDC400 +#define FA_NPIV_CONF0_ADDR_81 0xD1000 +#define FA_NPIV_CONF1_ADDR_81 0xD2000 + +/* 83XX Flash locations -- occupies second 8MB region. */ +#define FA_FLASH_LAYOUT_ADDR_83 (0x3F1000/4) +#define FA_FLASH_LAYOUT_ADDR_28 (0x11000/4) + +#define NVRAM_DUAL_FCP_NVME_FLAG_OFFSET 0x196 + +#endif |