summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/snic/snic_fwint.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/snic/snic_fwint.h')
-rw-r--r--drivers/scsi/snic/snic_fwint.h513
1 files changed, 513 insertions, 0 deletions
diff --git a/drivers/scsi/snic/snic_fwint.h b/drivers/scsi/snic/snic_fwint.h
new file mode 100644
index 000000000..2550ba964
--- /dev/null
+++ b/drivers/scsi/snic/snic_fwint.h
@@ -0,0 +1,513 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright 2014 Cisco Systems, Inc. All rights reserved. */
+
+#ifndef __SNIC_FWINT_H
+#define __SNIC_FWINT_H
+
+#define SNIC_CDB_LEN 32 /* SCSI CDB size 32, can be used for 16 bytes */
+#define LUN_ADDR_LEN 8
+
+/*
+ * Command entry type
+ */
+enum snic_io_type {
+ /*
+ * Initiator request types
+ */
+ SNIC_REQ_REPORT_TGTS = 0x2, /* Report Targets */
+ SNIC_REQ_ICMND, /* Initiator command for SCSI IO */
+ SNIC_REQ_ITMF, /* Initiator command for Task Mgmt */
+ SNIC_REQ_HBA_RESET, /* SNIC Reset */
+ SNIC_REQ_EXCH_VER, /* Exchange Version Information */
+ SNIC_REQ_TGT_INFO, /* Backend/Target Information */
+ SNIC_REQ_BOOT_LUNS,
+
+ /*
+ * Response type
+ */
+ SNIC_RSP_REPORT_TGTS_CMPL = 0x12,/* Report Targets Completion */
+ SNIC_RSP_ICMND_CMPL, /* SCSI IO Completion */
+ SNIC_RSP_ITMF_CMPL, /* Task Management Completion */
+ SNIC_RSP_HBA_RESET_CMPL, /* SNIC Reset Completion */
+ SNIC_RSP_EXCH_VER_CMPL, /* Exchange Version Completion*/
+ SNIC_RSP_BOOT_LUNS_CMPL,
+
+ /*
+ * Misc Request types
+ */
+ SNIC_MSG_ACK = 0x80, /* Ack: snic_notify_msg */
+ SNIC_MSG_ASYNC_EVNOTIFY, /* Asynchronous Event Notification */
+}; /* end of enum snic_io_type */
+
+
+/*
+ * Header status codes from firmware
+ */
+enum snic_io_status {
+ SNIC_STAT_IO_SUCCESS = 0, /* request was successful */
+
+ /*
+ * If a request to the fw is rejected, the original request header
+ * will be returned with the status set to one of the following:
+ */
+ SNIC_STAT_INVALID_HDR, /* header contains invalid data */
+ SNIC_STAT_OUT_OF_RES, /* out of resources to complete request */
+ SNIC_STAT_INVALID_PARM, /* some parameter in request is not valid */
+ SNIC_STAT_REQ_NOT_SUP, /* req type is not supported */
+ SNIC_STAT_IO_NOT_FOUND, /* requested IO was not found */
+
+ /*
+ * Once a request is processed, the fw will usually return
+ * a cmpl message type. In cases where errors occurred,
+ * the header status would be filled in with one of the following:
+ */
+ SNIC_STAT_ABORTED, /* req was aborted */
+ SNIC_STAT_TIMEOUT, /* req was timed out */
+ SNIC_STAT_SGL_INVALID, /* req was aborted due to sgl error */
+ SNIC_STAT_DATA_CNT_MISMATCH, /*recv/sent more/less data than expec */
+ SNIC_STAT_FW_ERR, /* req was terminated due to fw error */
+ SNIC_STAT_ITMF_REJECT, /* itmf req was rejected by target */
+ SNIC_STAT_ITMF_FAIL, /* itmf req was failed */
+ SNIC_STAT_ITMF_INCORRECT_LUN, /* itmf req has incorrect LUN id*/
+ SNIC_STAT_CMND_REJECT, /* req was invalid and rejected */
+ SNIC_STAT_DEV_OFFLINE, /* req sent to offline device */
+ SNIC_STAT_NO_BOOTLUN,
+ SNIC_STAT_SCSI_ERR, /* SCSI error returned by Target. */
+ SNIC_STAT_NOT_READY, /* sNIC Subsystem is not ready */
+ SNIC_STAT_FATAL_ERROR, /* sNIC is in unrecoverable state */
+}; /* end of enum snic_io_status */
+
+/*
+ * snic_io_hdr : host <--> firmware
+ *
+ * for any other message that will be queued to firmware should
+ * have the following request header
+ */
+struct snic_io_hdr {
+ __le32 hid;
+ __le32 cmnd_id; /* tag here */
+ ulong init_ctx; /* initiator context */
+ u8 type; /* request/response type */
+ u8 status; /* header status entry */
+ u8 protocol; /* Protocol specific, may needed for RoCE*/
+ u8 flags;
+ __le16 sg_cnt;
+ u16 resvd;
+};
+
+/* auxillary funciton for encoding the snic_io_hdr */
+static inline void
+snic_io_hdr_enc(struct snic_io_hdr *hdr, u8 typ, u8 status, u32 id, u32 hid,
+ u16 sg_cnt, ulong ctx)
+{
+ hdr->type = typ;
+ hdr->status = status;
+ hdr->protocol = 0;
+ hdr->hid = cpu_to_le32(hid);
+ hdr->cmnd_id = cpu_to_le32(id);
+ hdr->sg_cnt = cpu_to_le16(sg_cnt);
+ hdr->init_ctx = ctx;
+ hdr->flags = 0;
+}
+
+/* auxillary funciton for decoding the snic_io_hdr */
+static inline void
+snic_io_hdr_dec(struct snic_io_hdr *hdr, u8 *typ, u8 *stat, u32 *cmnd_id,
+ u32 *hid, ulong *ctx)
+{
+ *typ = hdr->type;
+ *stat = hdr->status;
+ *hid = le32_to_cpu(hdr->hid);
+ *cmnd_id = le32_to_cpu(hdr->cmnd_id);
+ *ctx = hdr->init_ctx;
+}
+
+/*
+ * snic_host_info: host -> firmware
+ *
+ * Used for sending host information to firmware, and request fw version
+ */
+struct snic_exch_ver_req {
+ __le32 drvr_ver; /* for debugging, when fw dump captured */
+ __le32 os_type; /* for OS specific features */
+};
+
+/*
+ * os_type flags
+ * Bit 0-7 : OS information
+ * Bit 8-31: Feature/Capability Information
+ */
+#define SNIC_OS_LINUX 0x1
+#define SNIC_OS_WIN 0x2
+#define SNIC_OS_ESX 0x3
+
+/*
+ * HBA Capabilities
+ * Bit 1: Reserved.
+ * Bit 2: Dynamic Discovery of LUNs.
+ * Bit 3: Async event notifications on tgt online/offline events.
+ * Bit 4: IO timeout support in FW.
+ * Bit 5-31: Reserved.
+ */
+#define SNIC_HBA_CAP_DDL 0x02 /* Supports Dynamic Discovery of LUNs */
+#define SNIC_HBA_CAP_AEN 0x04 /* Supports Async Event Noitifcation */
+#define SNIC_HBA_CAP_TMO 0x08 /* Supports IO timeout in FW */
+
+/*
+ * snic_exch_ver_rsp : firmware -> host
+ *
+ * Used by firmware to send response to version request
+ */
+struct snic_exch_ver_rsp {
+ __le32 version;
+ __le32 hid;
+ __le32 max_concur_ios; /* max concurrent ios */
+ __le32 max_sgs_per_cmd; /* max sgls per IO */
+ __le32 max_io_sz; /* max io size supported */
+ __le32 hba_cap; /* hba capabilities */
+ __le32 max_tgts; /* max tgts supported */
+ __le16 io_timeout; /* FW extended timeout */
+ u16 rsvd;
+};
+
+
+/*
+ * snic_report_tgts : host -> firmware request
+ *
+ * Used by the host to request list of targets
+ */
+struct snic_report_tgts {
+ __le16 sg_cnt;
+ __le16 flags; /* specific flags from fw */
+ u8 _resvd[4];
+ __le64 sg_addr; /* Points to SGL */
+ __le64 sense_addr;
+};
+
+enum snic_type {
+ SNIC_NONE = 0x0,
+ SNIC_DAS,
+ SNIC_SAN,
+};
+
+
+/* Report Target Response */
+enum snic_tgt_type {
+ SNIC_TGT_NONE = 0x0,
+ SNIC_TGT_DAS, /* DAS Target */
+ SNIC_TGT_SAN, /* SAN Target */
+};
+
+/* target id format */
+struct snic_tgt_id {
+ __le32 tgt_id; /* target id */
+ __le16 tgt_type; /* tgt type */
+ __le16 vnic_id; /* corresponding vnic id */
+};
+
+/*
+ * snic_report_tgts_cmpl : firmware -> host response
+ *
+ * Used by firmware to send response to Report Targets request
+ */
+struct snic_report_tgts_cmpl {
+ __le32 tgt_cnt; /* Number of Targets accessible */
+ u32 _resvd;
+};
+
+/*
+ * Command flags
+ *
+ * Bit 0: Read flags
+ * Bit 1: Write flag
+ * Bit 2: ESGL - sg/esg array contains extended sg
+ * ESGE - is a host buffer contains sg elements
+ * Bit 3-4: Task Attributes
+ * 00b - simple
+ * 01b - head of queue
+ * 10b - ordered
+ * Bit 5-7: Priority - future use
+ * Bit 8-15: Reserved
+ */
+
+#define SNIC_ICMND_WR 0x01 /* write command */
+#define SNIC_ICMND_RD 0x02 /* read command */
+#define SNIC_ICMND_ESGL 0x04 /* SGE/ESGE array contains valid data*/
+
+/*
+ * Priority/Task Attribute settings
+ */
+#define SNIC_ICMND_TSK_SHIFT 2 /* task attr starts at bit 2 */
+#define SNIC_ICMND_TSK_MASK(x) ((x>>SNIC_ICMND_TSK_SHIFT) & ~(0xffff))
+#define SNIC_ICMND_TSK_SIMPLE 0 /* simple task attr */
+#define SNIC_ICMND_TSK_HEAD_OF_QUEUE 1 /* head of qeuue task attr */
+#define SNIC_ICMND_TSK_ORDERED 2 /* ordered task attr */
+
+#define SNIC_ICMND_PRI_SHIFT 5 /* prio val starts at bit 5 */
+
+/*
+ * snic_icmnd : host-> firmware request
+ *
+ * used for sending out an initiator SCSI 16/32-byte command
+ */
+struct snic_icmnd {
+ __le16 sg_cnt; /* Number of SG Elements */
+ __le16 flags; /* flags */
+ __le32 sense_len; /* Sense buffer length */
+ __le64 tgt_id; /* Destination Target ID */
+ __le64 lun_id; /* Destination LUN ID */
+ u8 cdb_len;
+ u8 _resvd;
+ __le16 time_out; /* ms time for Res allocations fw to handle io*/
+ __le32 data_len; /* Total number of bytes to be transferred */
+ u8 cdb[SNIC_CDB_LEN];
+ __le64 sg_addr; /* Points to SG List */
+ __le64 sense_addr; /* Sense buffer address */
+};
+
+
+/* Response flags */
+/* Bit 0: Under run
+ * Bit 1: Over Run
+ * Bit 2-7: Reserved
+ */
+#define SNIC_ICMND_CMPL_UNDR_RUN 0x01 /* resid under and valid */
+#define SNIC_ICMND_CMPL_OVER_RUN 0x02 /* resid over and valid */
+
+/*
+ * snic_icmnd_cmpl: firmware -> host response
+ *
+ * Used for sending the host a response to an icmnd (initiator command)
+ */
+struct snic_icmnd_cmpl {
+ u8 scsi_status; /* value as per SAM */
+ u8 flags;
+ __le16 sense_len; /* Sense Length */
+ __le32 resid; /* Residue : # bytes under or over run */
+};
+
+/*
+ * snic_itmf: host->firmware request
+ *
+ * used for requesting the firmware to abort a request and/or send out
+ * a task management function
+ *
+ * the req_id field is valid in case of abort task and clear task
+ */
+struct snic_itmf {
+ u8 tm_type; /* SCSI Task Management request */
+ u8 resvd;
+ __le16 flags; /* flags */
+ __le32 req_id; /* Command id of snic req to be aborted */
+ __le64 tgt_id; /* Target ID */
+ __le64 lun_id; /* Destination LUN ID */
+ __le16 timeout; /* in sec */
+};
+
+/*
+ * Task Management Request
+ */
+enum snic_itmf_tm_type {
+ SNIC_ITMF_ABTS_TASK = 0x01, /* Abort Task */
+ SNIC_ITMF_ABTS_TASK_SET, /* Abort Task Set */
+ SNIC_ITMF_CLR_TASK, /* Clear Task */
+ SNIC_ITMF_CLR_TASKSET, /* Clear Task Set */
+ SNIC_ITMF_LUN_RESET, /* Lun Reset */
+ SNIC_ITMF_ABTS_TASK_TERM, /* Supported for SAN Targets */
+};
+
+/*
+ * snic_itmf_cmpl: firmware -> host resposne
+ *
+ * used for sending the host a response for a itmf request
+ */
+struct snic_itmf_cmpl {
+ __le32 nterminated; /* # IOs terminated as a result of tmf */
+ u8 flags; /* flags */
+ u8 _resvd[3];
+};
+
+/*
+ * itmfl_cmpl flags
+ * Bit 0 : 1 - Num terminated field valid
+ * Bit 1 - 7 : Reserved
+ */
+#define SNIC_NUM_TERM_VALID 0x01 /* Number of IOs terminated */
+
+/*
+ * snic_hba_reset: host -> firmware request
+ *
+ * used for requesting firmware to reset snic
+ */
+struct snic_hba_reset {
+ __le16 flags; /* flags */
+ u8 _resvd[6];
+};
+
+/*
+ * snic_hba_reset_cmpl: firmware -> host response
+ *
+ * Used by firmware to respond to the host's hba reset request
+ */
+struct snic_hba_reset_cmpl {
+ u8 flags; /* flags : more info needs to be added*/
+ u8 _resvd[7];
+};
+
+/*
+ * snic_notify_msg: firmware -> host response
+ *
+ * Used by firmware to notify host of the last work queue entry received
+ */
+struct snic_notify_msg {
+ __le32 wqe_num; /* wq entry number */
+ u8 flags; /* flags, macros */
+ u8 _resvd[4];
+};
+
+
+#define SNIC_EVDATA_LEN 24 /* in bytes */
+/* snic_async_evnotify: firmware -> host notification
+ *
+ * Used by firmware to notify the host about configuration/state changes
+ */
+struct snic_async_evnotify {
+ u8 FLS_EVENT_DESC;
+ u8 vnic; /* vnic id */
+ u8 _resvd[2];
+ __le32 ev_id; /* Event ID */
+ u8 ev_data[SNIC_EVDATA_LEN]; /* Event Data */
+ u8 _resvd2[4];
+};
+
+/* async event flags */
+enum snic_ev_type {
+ SNIC_EV_TGT_OFFLINE = 0x01, /* Target Offline, PL contains TGT ID */
+ SNIC_EV_TGT_ONLINE, /* Target Online, PL contains TGT ID */
+ SNIC_EV_LUN_OFFLINE, /* LUN Offline, PL contains LUN ID */
+ SNIC_EV_LUN_ONLINE, /* LUN Online, PL contains LUN ID */
+ SNIC_EV_CONF_CHG, /* Dev Config/Attr Change Event */
+ SNIC_EV_TGT_ADDED, /* Target Added */
+ SNIC_EV_TGT_DELTD, /* Target Del'd, PL contains TGT ID */
+ SNIC_EV_LUN_ADDED, /* LUN Added */
+ SNIC_EV_LUN_DELTD, /* LUN Del'd, PL cont. TGT & LUN ID */
+
+ SNIC_EV_DISC_CMPL = 0x10, /* Discovery Completed Event */
+};
+
+
+#define SNIC_HOST_REQ_LEN 128 /*Exp length of host req, wq desc sz*/
+/* Payload 88 bytes = 128 - 24 - 16 */
+#define SNIC_HOST_REQ_PAYLOAD ((int)(SNIC_HOST_REQ_LEN - \
+ sizeof(struct snic_io_hdr) - \
+ (2 * sizeof(u64)) - sizeof(ulong)))
+
+/*
+ * snic_host_req: host -> firmware request
+ *
+ * Basic structure for all snic requests that are sent from the host to
+ * firmware. They are 128 bytes in size.
+ */
+struct snic_host_req {
+ u64 ctrl_data[2]; /*16 bytes - Control Data */
+ struct snic_io_hdr hdr;
+ union {
+ /*
+ * Entry specific space, last byte contains color
+ */
+ u8 buf[SNIC_HOST_REQ_PAYLOAD];
+
+ /*
+ * Exchange firmware version
+ */
+ struct snic_exch_ver_req exch_ver;
+
+ /* report targets */
+ struct snic_report_tgts rpt_tgts;
+
+ /* io request */
+ struct snic_icmnd icmnd;
+
+ /* task management request */
+ struct snic_itmf itmf;
+
+ /* hba reset */
+ struct snic_hba_reset reset;
+ } u;
+
+ ulong req_pa;
+}; /* end of snic_host_req structure */
+
+
+#define SNIC_FW_REQ_LEN 64 /* Expected length of fw req */
+struct snic_fw_req {
+ struct snic_io_hdr hdr;
+ union {
+ /*
+ * Entry specific space, last byte contains color
+ */
+ u8 buf[SNIC_FW_REQ_LEN - sizeof(struct snic_io_hdr)];
+
+ /* Exchange Version Response */
+ struct snic_exch_ver_rsp exch_ver_cmpl;
+
+ /* Report Targets Response */
+ struct snic_report_tgts_cmpl rpt_tgts_cmpl;
+
+ /* scsi response */
+ struct snic_icmnd_cmpl icmnd_cmpl;
+
+ /* task management response */
+ struct snic_itmf_cmpl itmf_cmpl;
+
+ /* hba reset response */
+ struct snic_hba_reset_cmpl reset_cmpl;
+
+ /* notify message */
+ struct snic_notify_msg ack;
+
+ /* async notification event */
+ struct snic_async_evnotify async_ev;
+
+ } u;
+}; /* end of snic_fw_req structure */
+
+/*
+ * Auxillary macro to verify specific snic req/cmpl structures
+ * to ensure that it will be aligned to 64 bit, and not using
+ * color bit field
+ */
+#define VERIFY_REQ_SZ(x)
+#define VERIFY_CMPL_SZ(x)
+
+/*
+ * Access routines to encode and decode the color bit, which is the most
+ * significant bit of the structure.
+ */
+static inline void
+snic_color_enc(struct snic_fw_req *req, u8 color)
+{
+ u8 *c = ((u8 *) req) + sizeof(struct snic_fw_req) - 1;
+
+ if (color)
+ *c |= 0x80;
+ else
+ *c &= ~0x80;
+}
+
+static inline void
+snic_color_dec(struct snic_fw_req *req, u8 *color)
+{
+ u8 *c = ((u8 *) req) + sizeof(struct snic_fw_req) - 1;
+
+ *color = *c >> 7;
+
+ /* Make sure color bit is read from desc *before* other fields
+ * are read from desc. Hardware guarantees color bit is last
+ * bit (byte) written. Adding the rmb() prevents the compiler
+ * and/or CPU from reordering the reads which would potentially
+ * result in reading stale values.
+ */
+ rmb();
+}
+#endif /* end of __SNIC_FWINT_H */