summaryrefslogtreecommitdiffstats
path: root/drivers/soc/samsung
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/soc/samsung')
-rw-r--r--drivers/soc/samsung/Kconfig81
-rw-r--r--drivers/soc/samsung/Makefile15
-rw-r--r--drivers/soc/samsung/exynos-asv.c160
-rw-r--r--drivers/soc/samsung/exynos-asv.h73
-rw-r--r--drivers/soc/samsung/exynos-chipid.c209
-rw-r--r--drivers/soc/samsung/exynos-pmu.c173
-rw-r--r--drivers/soc/samsung/exynos-pmu.h44
-rw-r--r--drivers/soc/samsung/exynos-regulator-coupler.c221
-rw-r--r--drivers/soc/samsung/exynos-usi.c285
-rw-r--r--drivers/soc/samsung/exynos3250-pmu.c171
-rw-r--r--drivers/soc/samsung/exynos4-pmu.c218
-rw-r--r--drivers/soc/samsung/exynos5250-pmu.c191
-rw-r--r--drivers/soc/samsung/exynos5420-pmu.c276
-rw-r--r--drivers/soc/samsung/exynos5422-asv.c506
-rw-r--r--drivers/soc/samsung/exynos5422-asv.h31
-rw-r--r--drivers/soc/samsung/s3c-pm-check.c233
16 files changed, 2887 insertions, 0 deletions
diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig
new file mode 100644
index 0000000000..7a8f291e77
--- /dev/null
+++ b/drivers/soc/samsung/Kconfig
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Samsung SoC drivers
+#
+menuconfig SOC_SAMSUNG
+ bool "Samsung SoC driver support" if COMPILE_TEST
+
+if SOC_SAMSUNG
+
+# There is no need to enable these drivers for ARMv8
+config EXYNOS_ASV_ARM
+ bool "Exynos ASV ARMv7-specific driver extensions" if COMPILE_TEST
+ depends on EXYNOS_CHIPID
+
+config EXYNOS_CHIPID
+ tristate "Exynos ChipID controller and ASV driver"
+ depends on ARCH_EXYNOS || COMPILE_TEST
+ default ARCH_EXYNOS
+ select EXYNOS_ASV_ARM if ARM && ARCH_EXYNOS
+ select MFD_SYSCON
+ select SOC_BUS
+ help
+ Support for Samsung Exynos SoC ChipID and Adaptive Supply Voltage.
+ This driver can also be built as module (exynos_chipid).
+
+config EXYNOS_USI
+ tristate "Exynos USI (Universal Serial Interface) driver"
+ default ARCH_EXYNOS && ARM64
+ depends on ARCH_EXYNOS || COMPILE_TEST
+ select MFD_SYSCON
+ help
+ Enable support for USI block. USI (Universal Serial Interface) is an
+ IP-core found in modern Samsung Exynos SoCs, like Exynos850 and
+ ExynosAutoV9. USI block can be configured to provide one of the
+ following serial protocols: UART, SPI or High Speed I2C.
+
+ This driver allows one to configure USI for desired protocol, which
+ is usually done in USI node in Device Tree.
+
+config EXYNOS_PMU
+ bool "Exynos PMU controller driver" if COMPILE_TEST
+ depends on ARCH_EXYNOS || ((ARM || ARM64) && COMPILE_TEST)
+ select EXYNOS_PMU_ARM_DRIVERS if ARM && ARCH_EXYNOS
+ select MFD_CORE
+
+# There is no need to enable these drivers for ARMv8
+config EXYNOS_PMU_ARM_DRIVERS
+ bool "Exynos PMU ARMv7-specific driver extensions" if COMPILE_TEST
+ depends on EXYNOS_PMU
+
+config EXYNOS_PM_DOMAINS
+ bool "Exynos PM domains" if COMPILE_TEST
+ depends on (ARCH_EXYNOS && PM_GENERIC_DOMAINS) || COMPILE_TEST
+
+config SAMSUNG_PM_CHECK
+ bool "S3C2410 PM Suspend Memory CRC"
+ depends on PM && (ARCH_S3C64XX || ARCH_S5PV210)
+ select CRC32
+ help
+ Enable the PM code's memory area checksum over sleep. This option
+ will generate CRCs of all blocks of memory, and store them before
+ going to sleep. The blocks are then checked on resume for any
+ errors.
+
+ Note, this can take several seconds depending on memory size
+ and CPU speed.
+
+config SAMSUNG_PM_CHECK_CHUNKSIZE
+ int "S3C2410 PM Suspend CRC Chunksize (KiB)"
+ depends on PM && SAMSUNG_PM_CHECK
+ default 64
+ help
+ Set the chunksize in Kilobytes of the CRC for checking memory
+ corruption over suspend and resume. A smaller value will mean that
+ the CRC data block will take more memory, but will identify any
+ faults with better precision.
+
+config EXYNOS_REGULATOR_COUPLER
+ bool "Exynos SoC Regulator Coupler" if COMPILE_TEST
+ depends on ARCH_EXYNOS || COMPILE_TEST
+endif
diff --git a/drivers/soc/samsung/Makefile b/drivers/soc/samsung/Makefile
new file mode 100644
index 0000000000..248a33d775
--- /dev/null
+++ b/drivers/soc/samsung/Makefile
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_EXYNOS_ASV_ARM) += exynos5422-asv.o
+obj-$(CONFIG_EXYNOS_CHIPID) += exynos_chipid.o
+exynos_chipid-y += exynos-chipid.o exynos-asv.o
+
+obj-$(CONFIG_EXYNOS_USI) += exynos-usi.o
+
+obj-$(CONFIG_EXYNOS_PMU) += exynos-pmu.o
+
+obj-$(CONFIG_EXYNOS_PMU_ARM_DRIVERS) += exynos3250-pmu.o exynos4-pmu.o \
+ exynos5250-pmu.o exynos5420-pmu.o
+obj-$(CONFIG_EXYNOS_REGULATOR_COUPLER) += exynos-regulator-coupler.o
+
+obj-$(CONFIG_SAMSUNG_PM_CHECK) += s3c-pm-check.o
diff --git a/drivers/soc/samsung/exynos-asv.c b/drivers/soc/samsung/exynos-asv.c
new file mode 100644
index 0000000000..d60af8acc3
--- /dev/null
+++ b/drivers/soc/samsung/exynos-asv.c
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ * Copyright (c) 2020 Krzysztof Kozlowski <krzk@kernel.org>
+ * Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
+ * Author: Krzysztof Kozlowski <krzk@kernel.org>
+ *
+ * Samsung Exynos SoC Adaptive Supply Voltage support
+ */
+
+#include <linux/cpu.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/of.h>
+#include <linux/pm_opp.h>
+#include <linux/regmap.h>
+#include <linux/soc/samsung/exynos-chipid.h>
+
+#include "exynos-asv.h"
+#include "exynos5422-asv.h"
+
+#define MHZ 1000000U
+
+static int exynos_asv_update_cpu_opps(struct exynos_asv *asv,
+ struct device *cpu)
+{
+ struct exynos_asv_subsys *subsys = NULL;
+ struct dev_pm_opp *opp;
+ unsigned int opp_freq;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(asv->subsys); i++) {
+ if (of_device_is_compatible(cpu->of_node,
+ asv->subsys[i].cpu_dt_compat)) {
+ subsys = &asv->subsys[i];
+ break;
+ }
+ }
+ if (!subsys)
+ return -EINVAL;
+
+ for (i = 0; i < subsys->table.num_rows; i++) {
+ unsigned int new_volt, volt;
+ int ret;
+
+ opp_freq = exynos_asv_opp_get_frequency(subsys, i);
+
+ opp = dev_pm_opp_find_freq_exact(cpu, opp_freq * MHZ, true);
+ if (IS_ERR(opp)) {
+ dev_info(asv->dev, "cpu%d opp%d, freq: %u missing\n",
+ cpu->id, i, opp_freq);
+
+ continue;
+ }
+
+ volt = dev_pm_opp_get_voltage(opp);
+ new_volt = asv->opp_get_voltage(subsys, i, volt);
+ dev_pm_opp_put(opp);
+
+ if (new_volt == volt)
+ continue;
+
+ ret = dev_pm_opp_adjust_voltage(cpu, opp_freq * MHZ,
+ new_volt, new_volt, new_volt);
+ if (ret < 0)
+ dev_err(asv->dev,
+ "Failed to adjust OPP %u Hz/%u uV for cpu%d\n",
+ opp_freq, new_volt, cpu->id);
+ else
+ dev_dbg(asv->dev,
+ "Adjusted OPP %u Hz/%u -> %u uV, cpu%d\n",
+ opp_freq, volt, new_volt, cpu->id);
+ }
+
+ return 0;
+}
+
+static int exynos_asv_update_opps(struct exynos_asv *asv)
+{
+ struct opp_table *last_opp_table = NULL;
+ struct device *cpu;
+ int ret, cpuid;
+
+ for_each_possible_cpu(cpuid) {
+ struct opp_table *opp_table;
+
+ cpu = get_cpu_device(cpuid);
+ if (!cpu)
+ continue;
+
+ opp_table = dev_pm_opp_get_opp_table(cpu);
+ if (IS_ERR(opp_table))
+ continue;
+
+ if (!last_opp_table || opp_table != last_opp_table) {
+ last_opp_table = opp_table;
+
+ ret = exynos_asv_update_cpu_opps(asv, cpu);
+ if (ret < 0)
+ dev_err(asv->dev, "Couldn't udate OPPs for cpu%d\n",
+ cpuid);
+ }
+
+ dev_pm_opp_put_opp_table(opp_table);
+ }
+
+ return 0;
+}
+
+int exynos_asv_init(struct device *dev, struct regmap *regmap)
+{
+ int (*probe_func)(struct exynos_asv *asv);
+ struct exynos_asv *asv;
+ struct device *cpu_dev;
+ u32 product_id = 0;
+ int ret, i;
+
+ asv = devm_kzalloc(dev, sizeof(*asv), GFP_KERNEL);
+ if (!asv)
+ return -ENOMEM;
+
+ asv->chipid_regmap = regmap;
+ asv->dev = dev;
+ ret = regmap_read(asv->chipid_regmap, EXYNOS_CHIPID_REG_PRO_ID,
+ &product_id);
+ if (ret < 0) {
+ dev_err(dev, "Cannot read revision from ChipID: %d\n", ret);
+ return -ENODEV;
+ }
+
+ switch (product_id & EXYNOS_MASK) {
+ case 0xE5422000:
+ probe_func = exynos5422_asv_init;
+ break;
+ default:
+ dev_dbg(dev, "No ASV support for this SoC\n");
+ devm_kfree(dev, asv);
+ return 0;
+ }
+
+ cpu_dev = get_cpu_device(0);
+ ret = dev_pm_opp_get_opp_count(cpu_dev);
+ if (ret < 0)
+ return -EPROBE_DEFER;
+
+ ret = of_property_read_u32(dev->of_node, "samsung,asv-bin",
+ &asv->of_bin);
+ if (ret < 0)
+ asv->of_bin = -EINVAL;
+
+ for (i = 0; i < ARRAY_SIZE(asv->subsys); i++)
+ asv->subsys[i].asv = asv;
+
+ ret = probe_func(asv);
+ if (ret < 0)
+ return ret;
+
+ return exynos_asv_update_opps(asv);
+}
diff --git a/drivers/soc/samsung/exynos-asv.h b/drivers/soc/samsung/exynos-asv.h
new file mode 100644
index 0000000000..dcbe154db3
--- /dev/null
+++ b/drivers/soc/samsung/exynos-asv.h
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2019 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ * Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
+ *
+ * Samsung Exynos SoC Adaptive Supply Voltage support
+ */
+#ifndef __LINUX_SOC_EXYNOS_ASV_H
+#define __LINUX_SOC_EXYNOS_ASV_H
+
+struct regmap;
+
+/* HPM, IDS values to select target group */
+struct asv_limit_entry {
+ unsigned int hpm;
+ unsigned int ids;
+};
+
+struct exynos_asv_table {
+ unsigned int num_rows;
+ unsigned int num_cols;
+ u32 *buf;
+};
+
+struct exynos_asv_subsys {
+ struct exynos_asv *asv;
+ const char *cpu_dt_compat;
+ int id;
+ struct exynos_asv_table table;
+
+ unsigned int base_volt;
+ unsigned int offset_volt_h;
+ unsigned int offset_volt_l;
+};
+
+struct exynos_asv {
+ struct device *dev;
+ struct regmap *chipid_regmap;
+ struct exynos_asv_subsys subsys[2];
+
+ int (*opp_get_voltage)(const struct exynos_asv_subsys *subs,
+ int level, unsigned int voltage);
+ unsigned int group;
+ unsigned int table;
+
+ /* True if SG fields from PKG_ID register should be used */
+ bool use_sg;
+ /* ASV bin read from DT */
+ int of_bin;
+};
+
+static inline u32 __asv_get_table_entry(const struct exynos_asv_table *table,
+ unsigned int row, unsigned int col)
+{
+ return table->buf[row * (table->num_cols) + col];
+}
+
+static inline u32 exynos_asv_opp_get_voltage(const struct exynos_asv_subsys *subsys,
+ unsigned int level, unsigned int group)
+{
+ return __asv_get_table_entry(&subsys->table, level, group + 1);
+}
+
+static inline u32 exynos_asv_opp_get_frequency(const struct exynos_asv_subsys *subsys,
+ unsigned int level)
+{
+ return __asv_get_table_entry(&subsys->table, level, 0);
+}
+
+int exynos_asv_init(struct device *dev, struct regmap *regmap);
+
+#endif /* __LINUX_SOC_EXYNOS_ASV_H */
diff --git a/drivers/soc/samsung/exynos-chipid.c b/drivers/soc/samsung/exynos-chipid.c
new file mode 100644
index 0000000000..7ba45c4aff
--- /dev/null
+++ b/drivers/soc/samsung/exynos-chipid.c
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ * Copyright (c) 2020 Krzysztof Kozlowski <krzk@kernel.org>
+ *
+ * Exynos - CHIP ID support
+ * Author: Pankaj Dubey <pankaj.dubey@samsung.com>
+ * Author: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
+ * Author: Krzysztof Kozlowski <krzk@kernel.org>
+ *
+ * Samsung Exynos SoC Adaptive Supply Voltage and Chip ID support
+ */
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/soc/samsung/exynos-chipid.h>
+#include <linux/sys_soc.h>
+
+#include "exynos-asv.h"
+
+struct exynos_chipid_variant {
+ unsigned int rev_reg; /* revision register offset */
+ unsigned int main_rev_shift; /* main revision offset in rev_reg */
+ unsigned int sub_rev_shift; /* sub revision offset in rev_reg */
+};
+
+struct exynos_chipid_info {
+ u32 product_id;
+ u32 revision;
+};
+
+static const struct exynos_soc_id {
+ const char *name;
+ unsigned int id;
+} soc_ids[] = {
+ /* List ordered by SoC name */
+ /* Compatible with: samsung,exynos4210-chipid */
+ { "EXYNOS3250", 0xE3472000 },
+ { "EXYNOS4210", 0x43200000 }, /* EVT0 revision */
+ { "EXYNOS4210", 0x43210000 },
+ { "EXYNOS4212", 0x43220000 },
+ { "EXYNOS4412", 0xE4412000 },
+ { "EXYNOS5250", 0x43520000 },
+ { "EXYNOS5260", 0xE5260000 },
+ { "EXYNOS5410", 0xE5410000 },
+ { "EXYNOS5420", 0xE5420000 },
+ { "EXYNOS5433", 0xE5433000 },
+ { "EXYNOS5440", 0xE5440000 },
+ { "EXYNOS5800", 0xE5422000 },
+ { "EXYNOS7420", 0xE7420000 },
+ /* Compatible with: samsung,exynos850-chipid */
+ { "EXYNOS7885", 0xE7885000 },
+ { "EXYNOS850", 0xE3830000 },
+ { "EXYNOSAUTOV9", 0xAAA80000 },
+};
+
+static const char *product_id_to_soc_id(unsigned int product_id)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(soc_ids); i++)
+ if (product_id == soc_ids[i].id)
+ return soc_ids[i].name;
+ return NULL;
+}
+
+static int exynos_chipid_get_chipid_info(struct regmap *regmap,
+ const struct exynos_chipid_variant *data,
+ struct exynos_chipid_info *soc_info)
+{
+ int ret;
+ unsigned int val, main_rev, sub_rev;
+
+ ret = regmap_read(regmap, EXYNOS_CHIPID_REG_PRO_ID, &val);
+ if (ret < 0)
+ return ret;
+ soc_info->product_id = val & EXYNOS_MASK;
+
+ if (data->rev_reg != EXYNOS_CHIPID_REG_PRO_ID) {
+ ret = regmap_read(regmap, data->rev_reg, &val);
+ if (ret < 0)
+ return ret;
+ }
+ main_rev = (val >> data->main_rev_shift) & EXYNOS_REV_PART_MASK;
+ sub_rev = (val >> data->sub_rev_shift) & EXYNOS_REV_PART_MASK;
+ soc_info->revision = (main_rev << EXYNOS_REV_PART_SHIFT) | sub_rev;
+
+ return 0;
+}
+
+static int exynos_chipid_probe(struct platform_device *pdev)
+{
+ const struct exynos_chipid_variant *drv_data;
+ struct exynos_chipid_info soc_info;
+ struct soc_device_attribute *soc_dev_attr;
+ struct soc_device *soc_dev;
+ struct device_node *root;
+ struct regmap *regmap;
+ int ret;
+
+ drv_data = of_device_get_match_data(&pdev->dev);
+ if (!drv_data)
+ return -EINVAL;
+
+ regmap = device_node_to_regmap(pdev->dev.of_node);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ ret = exynos_chipid_get_chipid_info(regmap, drv_data, &soc_info);
+ if (ret < 0)
+ return ret;
+
+ soc_dev_attr = devm_kzalloc(&pdev->dev, sizeof(*soc_dev_attr),
+ GFP_KERNEL);
+ if (!soc_dev_attr)
+ return -ENOMEM;
+
+ soc_dev_attr->family = "Samsung Exynos";
+
+ root = of_find_node_by_path("/");
+ of_property_read_string(root, "model", &soc_dev_attr->machine);
+ of_node_put(root);
+
+ soc_dev_attr->revision = devm_kasprintf(&pdev->dev, GFP_KERNEL,
+ "%x", soc_info.revision);
+ soc_dev_attr->soc_id = product_id_to_soc_id(soc_info.product_id);
+ if (!soc_dev_attr->soc_id) {
+ pr_err("Unknown SoC\n");
+ return -ENODEV;
+ }
+
+ /* please note that the actual registration will be deferred */
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev))
+ return PTR_ERR(soc_dev);
+
+ ret = exynos_asv_init(&pdev->dev, regmap);
+ if (ret)
+ goto err;
+
+ platform_set_drvdata(pdev, soc_dev);
+
+ dev_info(&pdev->dev, "Exynos: CPU[%s] PRO_ID[0x%x] REV[0x%x] Detected\n",
+ soc_dev_attr->soc_id, soc_info.product_id, soc_info.revision);
+
+ return 0;
+
+err:
+ soc_device_unregister(soc_dev);
+
+ return ret;
+}
+
+static int exynos_chipid_remove(struct platform_device *pdev)
+{
+ struct soc_device *soc_dev = platform_get_drvdata(pdev);
+
+ soc_device_unregister(soc_dev);
+
+ return 0;
+}
+
+static const struct exynos_chipid_variant exynos4210_chipid_drv_data = {
+ .rev_reg = 0x0,
+ .main_rev_shift = 4,
+ .sub_rev_shift = 0,
+};
+
+static const struct exynos_chipid_variant exynos850_chipid_drv_data = {
+ .rev_reg = 0x10,
+ .main_rev_shift = 20,
+ .sub_rev_shift = 16,
+};
+
+static const struct of_device_id exynos_chipid_of_device_ids[] = {
+ {
+ .compatible = "samsung,exynos4210-chipid",
+ .data = &exynos4210_chipid_drv_data,
+ }, {
+ .compatible = "samsung,exynos850-chipid",
+ .data = &exynos850_chipid_drv_data,
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(of, exynos_chipid_of_device_ids);
+
+static struct platform_driver exynos_chipid_driver = {
+ .driver = {
+ .name = "exynos-chipid",
+ .of_match_table = exynos_chipid_of_device_ids,
+ },
+ .probe = exynos_chipid_probe,
+ .remove = exynos_chipid_remove,
+};
+module_platform_driver(exynos_chipid_driver);
+
+MODULE_DESCRIPTION("Samsung Exynos ChipID controller and ASV driver");
+MODULE_AUTHOR("Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>");
+MODULE_AUTHOR("Krzysztof Kozlowski <krzk@kernel.org>");
+MODULE_AUTHOR("Pankaj Dubey <pankaj.dubey@samsung.com>");
+MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/soc/samsung/exynos-pmu.c b/drivers/soc/samsung/exynos-pmu.c
new file mode 100644
index 0000000000..250537d7cf
--- /dev/null
+++ b/drivers/soc/samsung/exynos-pmu.c
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2011-2014 Samsung Electronics Co., Ltd.
+// http://www.samsung.com/
+//
+// Exynos - CPU PMU(Power Management Unit) support
+
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+#include <linux/soc/samsung/exynos-regs-pmu.h>
+#include <linux/soc/samsung/exynos-pmu.h>
+
+#include "exynos-pmu.h"
+
+struct exynos_pmu_context {
+ struct device *dev;
+ const struct exynos_pmu_data *pmu_data;
+};
+
+void __iomem *pmu_base_addr;
+static struct exynos_pmu_context *pmu_context;
+
+void pmu_raw_writel(u32 val, u32 offset)
+{
+ writel_relaxed(val, pmu_base_addr + offset);
+}
+
+u32 pmu_raw_readl(u32 offset)
+{
+ return readl_relaxed(pmu_base_addr + offset);
+}
+
+void exynos_sys_powerdown_conf(enum sys_powerdown mode)
+{
+ unsigned int i;
+ const struct exynos_pmu_data *pmu_data;
+
+ if (!pmu_context || !pmu_context->pmu_data)
+ return;
+
+ pmu_data = pmu_context->pmu_data;
+
+ if (pmu_data->powerdown_conf)
+ pmu_data->powerdown_conf(mode);
+
+ if (pmu_data->pmu_config) {
+ for (i = 0; (pmu_data->pmu_config[i].offset != PMU_TABLE_END); i++)
+ pmu_raw_writel(pmu_data->pmu_config[i].val[mode],
+ pmu_data->pmu_config[i].offset);
+ }
+
+ if (pmu_data->powerdown_conf_extra)
+ pmu_data->powerdown_conf_extra(mode);
+
+ if (pmu_data->pmu_config_extra) {
+ for (i = 0; pmu_data->pmu_config_extra[i].offset != PMU_TABLE_END; i++)
+ pmu_raw_writel(pmu_data->pmu_config_extra[i].val[mode],
+ pmu_data->pmu_config_extra[i].offset);
+ }
+}
+
+/*
+ * Split the data between ARM architectures because it is relatively big
+ * and useless on other arch.
+ */
+#ifdef CONFIG_EXYNOS_PMU_ARM_DRIVERS
+#define exynos_pmu_data_arm_ptr(data) (&data)
+#else
+#define exynos_pmu_data_arm_ptr(data) NULL
+#endif
+
+/*
+ * PMU platform driver and devicetree bindings.
+ */
+static const struct of_device_id exynos_pmu_of_device_ids[] = {
+ {
+ .compatible = "samsung,exynos3250-pmu",
+ .data = exynos_pmu_data_arm_ptr(exynos3250_pmu_data),
+ }, {
+ .compatible = "samsung,exynos4210-pmu",
+ .data = exynos_pmu_data_arm_ptr(exynos4210_pmu_data),
+ }, {
+ .compatible = "samsung,exynos4212-pmu",
+ .data = exynos_pmu_data_arm_ptr(exynos4212_pmu_data),
+ }, {
+ .compatible = "samsung,exynos4412-pmu",
+ .data = exynos_pmu_data_arm_ptr(exynos4412_pmu_data),
+ }, {
+ .compatible = "samsung,exynos5250-pmu",
+ .data = exynos_pmu_data_arm_ptr(exynos5250_pmu_data),
+ }, {
+ .compatible = "samsung,exynos5410-pmu",
+ }, {
+ .compatible = "samsung,exynos5420-pmu",
+ .data = exynos_pmu_data_arm_ptr(exynos5420_pmu_data),
+ }, {
+ .compatible = "samsung,exynos5433-pmu",
+ }, {
+ .compatible = "samsung,exynos7-pmu",
+ }, {
+ .compatible = "samsung,exynos850-pmu",
+ },
+ { /*sentinel*/ },
+};
+
+static const struct mfd_cell exynos_pmu_devs[] = {
+ { .name = "exynos-clkout", },
+};
+
+struct regmap *exynos_get_pmu_regmap(void)
+{
+ struct device_node *np = of_find_matching_node(NULL,
+ exynos_pmu_of_device_ids);
+ if (np)
+ return syscon_node_to_regmap(np);
+ return ERR_PTR(-ENODEV);
+}
+EXPORT_SYMBOL_GPL(exynos_get_pmu_regmap);
+
+static int exynos_pmu_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ int ret;
+
+ pmu_base_addr = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(pmu_base_addr))
+ return PTR_ERR(pmu_base_addr);
+
+ pmu_context = devm_kzalloc(&pdev->dev,
+ sizeof(struct exynos_pmu_context),
+ GFP_KERNEL);
+ if (!pmu_context)
+ return -ENOMEM;
+ pmu_context->dev = dev;
+ pmu_context->pmu_data = of_device_get_match_data(dev);
+
+ if (pmu_context->pmu_data && pmu_context->pmu_data->pmu_init)
+ pmu_context->pmu_data->pmu_init();
+
+ platform_set_drvdata(pdev, pmu_context);
+
+ ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, exynos_pmu_devs,
+ ARRAY_SIZE(exynos_pmu_devs), NULL, 0, NULL);
+ if (ret)
+ return ret;
+
+ if (devm_of_platform_populate(dev))
+ dev_err(dev, "Error populating children, reboot and poweroff might not work properly\n");
+
+ dev_dbg(dev, "Exynos PMU Driver probe done\n");
+ return 0;
+}
+
+static struct platform_driver exynos_pmu_driver = {
+ .driver = {
+ .name = "exynos-pmu",
+ .of_match_table = exynos_pmu_of_device_ids,
+ },
+ .probe = exynos_pmu_probe,
+};
+
+static int __init exynos_pmu_init(void)
+{
+ return platform_driver_register(&exynos_pmu_driver);
+
+}
+postcore_initcall(exynos_pmu_init);
diff --git a/drivers/soc/samsung/exynos-pmu.h b/drivers/soc/samsung/exynos-pmu.h
new file mode 100644
index 0000000000..1c652ffd79
--- /dev/null
+++ b/drivers/soc/samsung/exynos-pmu.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Header for Exynos PMU Driver support
+ */
+
+#ifndef __EXYNOS_PMU_H
+#define __EXYNOS_PMU_H
+
+#include <linux/io.h>
+
+#define PMU_TABLE_END (-1U)
+
+struct exynos_pmu_conf {
+ unsigned int offset;
+ u8 val[NUM_SYS_POWERDOWN];
+};
+
+struct exynos_pmu_data {
+ const struct exynos_pmu_conf *pmu_config;
+ const struct exynos_pmu_conf *pmu_config_extra;
+
+ void (*pmu_init)(void);
+ void (*powerdown_conf)(enum sys_powerdown);
+ void (*powerdown_conf_extra)(enum sys_powerdown);
+};
+
+extern void __iomem *pmu_base_addr;
+
+#ifdef CONFIG_EXYNOS_PMU_ARM_DRIVERS
+/* list of all exported SoC specific data */
+extern const struct exynos_pmu_data exynos3250_pmu_data;
+extern const struct exynos_pmu_data exynos4210_pmu_data;
+extern const struct exynos_pmu_data exynos4212_pmu_data;
+extern const struct exynos_pmu_data exynos4412_pmu_data;
+extern const struct exynos_pmu_data exynos5250_pmu_data;
+extern const struct exynos_pmu_data exynos5420_pmu_data;
+#endif
+
+extern void pmu_raw_writel(u32 val, u32 offset);
+extern u32 pmu_raw_readl(u32 offset);
+#endif /* __EXYNOS_PMU_H */
diff --git a/drivers/soc/samsung/exynos-regulator-coupler.c b/drivers/soc/samsung/exynos-regulator-coupler.c
new file mode 100644
index 0000000000..61a156b44a
--- /dev/null
+++ b/drivers/soc/samsung/exynos-regulator-coupler.c
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ * Author: Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * Simplified generic voltage coupler from regulator core.c
+ * The main difference is that it keeps current regulator voltage
+ * if consumers didn't apply their constraints yet.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/regulator/coupler.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+static int regulator_get_optimal_voltage(struct regulator_dev *rdev,
+ int *current_uV,
+ int *min_uV, int *max_uV,
+ suspend_state_t state)
+{
+ struct coupling_desc *c_desc = &rdev->coupling_desc;
+ struct regulator_dev **c_rdevs = c_desc->coupled_rdevs;
+ struct regulation_constraints *constraints = rdev->constraints;
+ int desired_min_uV = 0, desired_max_uV = INT_MAX;
+ int max_current_uV = 0, min_current_uV = INT_MAX;
+ int highest_min_uV = 0, target_uV, possible_uV;
+ int i, ret, max_spread, n_coupled = c_desc->n_coupled;
+ bool done;
+
+ *current_uV = -1;
+
+ /* Find highest min desired voltage */
+ for (i = 0; i < n_coupled; i++) {
+ int tmp_min = 0;
+ int tmp_max = INT_MAX;
+
+ lockdep_assert_held_once(&c_rdevs[i]->mutex.base);
+
+ ret = regulator_check_consumers(c_rdevs[i],
+ &tmp_min,
+ &tmp_max, state);
+ if (ret < 0)
+ return ret;
+
+ if (tmp_min == 0) {
+ ret = regulator_get_voltage_rdev(c_rdevs[i]);
+ if (ret < 0)
+ return ret;
+ tmp_min = ret;
+ }
+
+ /* apply constraints */
+ ret = regulator_check_voltage(c_rdevs[i], &tmp_min, &tmp_max);
+ if (ret < 0)
+ return ret;
+
+ highest_min_uV = max(highest_min_uV, tmp_min);
+
+ if (i == 0) {
+ desired_min_uV = tmp_min;
+ desired_max_uV = tmp_max;
+ }
+ }
+
+ max_spread = constraints->max_spread[0];
+
+ /*
+ * Let target_uV be equal to the desired one if possible.
+ * If not, set it to minimum voltage, allowed by other coupled
+ * regulators.
+ */
+ target_uV = max(desired_min_uV, highest_min_uV - max_spread);
+
+ /*
+ * Find min and max voltages, which currently aren't violating
+ * max_spread.
+ */
+ for (i = 1; i < n_coupled; i++) {
+ int tmp_act;
+
+ tmp_act = regulator_get_voltage_rdev(c_rdevs[i]);
+ if (tmp_act < 0)
+ return tmp_act;
+
+ min_current_uV = min(tmp_act, min_current_uV);
+ max_current_uV = max(tmp_act, max_current_uV);
+ }
+
+ /*
+ * Correct target voltage, so as it currently isn't
+ * violating max_spread
+ */
+ possible_uV = max(target_uV, max_current_uV - max_spread);
+ possible_uV = min(possible_uV, min_current_uV + max_spread);
+
+ if (possible_uV > desired_max_uV)
+ return -EINVAL;
+
+ done = (possible_uV == target_uV);
+ desired_min_uV = possible_uV;
+
+ /* Set current_uV if wasn't done earlier in the code and if necessary */
+ if (*current_uV == -1) {
+ ret = regulator_get_voltage_rdev(rdev);
+ if (ret < 0)
+ return ret;
+ *current_uV = ret;
+ }
+
+ *min_uV = desired_min_uV;
+ *max_uV = desired_max_uV;
+
+ return done;
+}
+
+static int exynos_coupler_balance_voltage(struct regulator_coupler *coupler,
+ struct regulator_dev *rdev,
+ suspend_state_t state)
+{
+ struct regulator_dev **c_rdevs;
+ struct regulator_dev *best_rdev;
+ struct coupling_desc *c_desc = &rdev->coupling_desc;
+ int i, ret, n_coupled, best_min_uV, best_max_uV, best_c_rdev;
+ unsigned int delta, best_delta;
+ unsigned long c_rdev_done = 0;
+ bool best_c_rdev_done;
+
+ c_rdevs = c_desc->coupled_rdevs;
+ n_coupled = c_desc->n_coupled;
+
+ /*
+ * Find the best possible voltage change on each loop. Leave the loop
+ * if there isn't any possible change.
+ */
+ do {
+ best_c_rdev_done = false;
+ best_delta = 0;
+ best_min_uV = 0;
+ best_max_uV = 0;
+ best_c_rdev = 0;
+ best_rdev = NULL;
+
+ /*
+ * Find highest difference between optimal voltage
+ * and current voltage.
+ */
+ for (i = 0; i < n_coupled; i++) {
+ /*
+ * optimal_uV is the best voltage that can be set for
+ * i-th regulator at the moment without violating
+ * max_spread constraint in order to balance
+ * the coupled voltages.
+ */
+ int optimal_uV = 0, optimal_max_uV = 0, current_uV = 0;
+
+ if (test_bit(i, &c_rdev_done))
+ continue;
+
+ ret = regulator_get_optimal_voltage(c_rdevs[i],
+ &current_uV,
+ &optimal_uV,
+ &optimal_max_uV,
+ state);
+ if (ret < 0)
+ goto out;
+
+ delta = abs(optimal_uV - current_uV);
+
+ if (delta && best_delta <= delta) {
+ best_c_rdev_done = ret;
+ best_delta = delta;
+ best_rdev = c_rdevs[i];
+ best_min_uV = optimal_uV;
+ best_max_uV = optimal_max_uV;
+ best_c_rdev = i;
+ }
+ }
+
+ /* Nothing to change, return successfully */
+ if (!best_rdev) {
+ ret = 0;
+ goto out;
+ }
+
+ ret = regulator_set_voltage_rdev(best_rdev, best_min_uV,
+ best_max_uV, state);
+
+ if (ret < 0)
+ goto out;
+
+ if (best_c_rdev_done)
+ set_bit(best_c_rdev, &c_rdev_done);
+
+ } while (n_coupled > 1);
+
+out:
+ return ret;
+}
+
+static int exynos_coupler_attach(struct regulator_coupler *coupler,
+ struct regulator_dev *rdev)
+{
+ return 0;
+}
+
+static struct regulator_coupler exynos_coupler = {
+ .attach_regulator = exynos_coupler_attach,
+ .balance_voltage = exynos_coupler_balance_voltage,
+};
+
+static int __init exynos_coupler_init(void)
+{
+ if (!of_machine_is_compatible("samsung,exynos5800"))
+ return 0;
+
+ return regulator_coupler_register(&exynos_coupler);
+}
+arch_initcall(exynos_coupler_init);
diff --git a/drivers/soc/samsung/exynos-usi.c b/drivers/soc/samsung/exynos-usi.c
new file mode 100644
index 0000000000..114352695a
--- /dev/null
+++ b/drivers/soc/samsung/exynos-usi.c
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021 Linaro Ltd.
+ * Author: Sam Protsenko <semen.protsenko@linaro.org>
+ *
+ * Samsung Exynos USI driver (Universal Serial Interface).
+ */
+
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/soc/samsung,exynos-usi.h>
+
+/* USIv2: System Register: SW_CONF register bits */
+#define USI_V2_SW_CONF_NONE 0x0
+#define USI_V2_SW_CONF_UART BIT(0)
+#define USI_V2_SW_CONF_SPI BIT(1)
+#define USI_V2_SW_CONF_I2C BIT(2)
+#define USI_V2_SW_CONF_MASK (USI_V2_SW_CONF_UART | USI_V2_SW_CONF_SPI | \
+ USI_V2_SW_CONF_I2C)
+
+/* USIv2: USI register offsets */
+#define USI_CON 0x04
+#define USI_OPTION 0x08
+
+/* USIv2: USI register bits */
+#define USI_CON_RESET BIT(0)
+#define USI_OPTION_CLKREQ_ON BIT(1)
+#define USI_OPTION_CLKSTOP_ON BIT(2)
+
+enum exynos_usi_ver {
+ USI_VER2 = 2,
+};
+
+struct exynos_usi_variant {
+ enum exynos_usi_ver ver; /* USI IP-core version */
+ unsigned int sw_conf_mask; /* SW_CONF mask for all protocols */
+ size_t min_mode; /* first index in exynos_usi_modes[] */
+ size_t max_mode; /* last index in exynos_usi_modes[] */
+ size_t num_clks; /* number of clocks to assert */
+ const char * const *clk_names; /* clock names to assert */
+};
+
+struct exynos_usi {
+ struct device *dev;
+ void __iomem *regs; /* USI register map */
+ struct clk_bulk_data *clks; /* USI clocks */
+
+ size_t mode; /* current USI SW_CONF mode index */
+ bool clkreq_on; /* always provide clock to IP */
+
+ /* System Register */
+ struct regmap *sysreg; /* System Register map */
+ unsigned int sw_conf; /* SW_CONF register offset in sysreg */
+
+ const struct exynos_usi_variant *data;
+};
+
+struct exynos_usi_mode {
+ const char *name; /* mode name */
+ unsigned int val; /* mode register value */
+};
+
+static const struct exynos_usi_mode exynos_usi_modes[] = {
+ [USI_V2_NONE] = { .name = "none", .val = USI_V2_SW_CONF_NONE },
+ [USI_V2_UART] = { .name = "uart", .val = USI_V2_SW_CONF_UART },
+ [USI_V2_SPI] = { .name = "spi", .val = USI_V2_SW_CONF_SPI },
+ [USI_V2_I2C] = { .name = "i2c", .val = USI_V2_SW_CONF_I2C },
+};
+
+static const char * const exynos850_usi_clk_names[] = { "pclk", "ipclk" };
+static const struct exynos_usi_variant exynos850_usi_data = {
+ .ver = USI_VER2,
+ .sw_conf_mask = USI_V2_SW_CONF_MASK,
+ .min_mode = USI_V2_NONE,
+ .max_mode = USI_V2_I2C,
+ .num_clks = ARRAY_SIZE(exynos850_usi_clk_names),
+ .clk_names = exynos850_usi_clk_names,
+};
+
+static const struct of_device_id exynos_usi_dt_match[] = {
+ {
+ .compatible = "samsung,exynos850-usi",
+ .data = &exynos850_usi_data,
+ },
+ { } /* sentinel */
+};
+MODULE_DEVICE_TABLE(of, exynos_usi_dt_match);
+
+/**
+ * exynos_usi_set_sw_conf - Set USI block configuration mode
+ * @usi: USI driver object
+ * @mode: Mode index
+ *
+ * Select underlying serial protocol (UART/SPI/I2C) in USI IP-core.
+ *
+ * Return: 0 on success, or negative error code on failure.
+ */
+static int exynos_usi_set_sw_conf(struct exynos_usi *usi, size_t mode)
+{
+ unsigned int val;
+ int ret;
+
+ if (mode < usi->data->min_mode || mode > usi->data->max_mode)
+ return -EINVAL;
+
+ val = exynos_usi_modes[mode].val;
+ ret = regmap_update_bits(usi->sysreg, usi->sw_conf,
+ usi->data->sw_conf_mask, val);
+ if (ret)
+ return ret;
+
+ usi->mode = mode;
+ dev_dbg(usi->dev, "protocol: %s\n", exynos_usi_modes[usi->mode].name);
+
+ return 0;
+}
+
+/**
+ * exynos_usi_enable - Initialize USI block
+ * @usi: USI driver object
+ *
+ * USI IP-core start state is "reset" (on startup and after CPU resume). This
+ * routine enables the USI block by clearing the reset flag. It also configures
+ * HWACG behavior (needed e.g. for UART Rx). It should be performed before
+ * underlying protocol becomes functional.
+ *
+ * Return: 0 on success, or negative error code on failure.
+ */
+static int exynos_usi_enable(const struct exynos_usi *usi)
+{
+ u32 val;
+ int ret;
+
+ ret = clk_bulk_prepare_enable(usi->data->num_clks, usi->clks);
+ if (ret)
+ return ret;
+
+ /* Enable USI block */
+ val = readl(usi->regs + USI_CON);
+ val &= ~USI_CON_RESET;
+ writel(val, usi->regs + USI_CON);
+ udelay(1);
+
+ /* Continuously provide the clock to USI IP w/o gating */
+ if (usi->clkreq_on) {
+ val = readl(usi->regs + USI_OPTION);
+ val &= ~USI_OPTION_CLKSTOP_ON;
+ val |= USI_OPTION_CLKREQ_ON;
+ writel(val, usi->regs + USI_OPTION);
+ }
+
+ clk_bulk_disable_unprepare(usi->data->num_clks, usi->clks);
+
+ return ret;
+}
+
+static int exynos_usi_configure(struct exynos_usi *usi)
+{
+ int ret;
+
+ ret = exynos_usi_set_sw_conf(usi, usi->mode);
+ if (ret)
+ return ret;
+
+ if (usi->data->ver == USI_VER2)
+ return exynos_usi_enable(usi);
+
+ return 0;
+}
+
+static int exynos_usi_parse_dt(struct device_node *np, struct exynos_usi *usi)
+{
+ int ret;
+ u32 mode;
+
+ ret = of_property_read_u32(np, "samsung,mode", &mode);
+ if (ret)
+ return ret;
+ if (mode < usi->data->min_mode || mode > usi->data->max_mode)
+ return -EINVAL;
+ usi->mode = mode;
+
+ usi->sysreg = syscon_regmap_lookup_by_phandle(np, "samsung,sysreg");
+ if (IS_ERR(usi->sysreg))
+ return PTR_ERR(usi->sysreg);
+
+ ret = of_property_read_u32_index(np, "samsung,sysreg", 1,
+ &usi->sw_conf);
+ if (ret)
+ return ret;
+
+ usi->clkreq_on = of_property_read_bool(np, "samsung,clkreq-on");
+
+ return 0;
+}
+
+static int exynos_usi_get_clocks(struct exynos_usi *usi)
+{
+ const size_t num = usi->data->num_clks;
+ struct device *dev = usi->dev;
+ size_t i;
+
+ if (num == 0)
+ return 0;
+
+ usi->clks = devm_kcalloc(dev, num, sizeof(*usi->clks), GFP_KERNEL);
+ if (!usi->clks)
+ return -ENOMEM;
+
+ for (i = 0; i < num; ++i)
+ usi->clks[i].id = usi->data->clk_names[i];
+
+ return devm_clk_bulk_get(dev, num, usi->clks);
+}
+
+static int exynos_usi_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct exynos_usi *usi;
+ int ret;
+
+ usi = devm_kzalloc(dev, sizeof(*usi), GFP_KERNEL);
+ if (!usi)
+ return -ENOMEM;
+
+ usi->dev = dev;
+ platform_set_drvdata(pdev, usi);
+
+ usi->data = of_device_get_match_data(dev);
+ if (!usi->data)
+ return -EINVAL;
+
+ ret = exynos_usi_parse_dt(np, usi);
+ if (ret)
+ return ret;
+
+ ret = exynos_usi_get_clocks(usi);
+ if (ret)
+ return ret;
+
+ if (usi->data->ver == USI_VER2) {
+ usi->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(usi->regs))
+ return PTR_ERR(usi->regs);
+ }
+
+ ret = exynos_usi_configure(usi);
+ if (ret)
+ return ret;
+
+ /* Make it possible to embed protocol nodes into USI np */
+ return of_platform_populate(np, NULL, NULL, dev);
+}
+
+static int __maybe_unused exynos_usi_resume_noirq(struct device *dev)
+{
+ struct exynos_usi *usi = dev_get_drvdata(dev);
+
+ return exynos_usi_configure(usi);
+}
+
+static const struct dev_pm_ops exynos_usi_pm = {
+ SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(NULL, exynos_usi_resume_noirq)
+};
+
+static struct platform_driver exynos_usi_driver = {
+ .driver = {
+ .name = "exynos-usi",
+ .pm = &exynos_usi_pm,
+ .of_match_table = exynos_usi_dt_match,
+ },
+ .probe = exynos_usi_probe,
+};
+module_platform_driver(exynos_usi_driver);
+
+MODULE_DESCRIPTION("Samsung USI driver");
+MODULE_AUTHOR("Sam Protsenko <semen.protsenko@linaro.org>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/soc/samsung/exynos3250-pmu.c b/drivers/soc/samsung/exynos3250-pmu.c
new file mode 100644
index 0000000000..30f230ed17
--- /dev/null
+++ b/drivers/soc/samsung/exynos3250-pmu.c
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2011-2015 Samsung Electronics Co., Ltd.
+// http://www.samsung.com/
+//
+// Exynos3250 - CPU PMU (Power Management Unit) support
+
+#include <linux/soc/samsung/exynos-regs-pmu.h>
+#include <linux/soc/samsung/exynos-pmu.h>
+
+#include "exynos-pmu.h"
+
+static const struct exynos_pmu_conf exynos3250_pmu_config[] = {
+ /* { .offset = offset, .val = { AFTR, W-AFTR, SLEEP } */
+ { EXYNOS3_ARM_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
+ { EXYNOS3_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS3_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS3_ARM_CORE1_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
+ { EXYNOS3_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS3_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS3_ISP_ARM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS3_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS3_ARM_COMMON_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
+ { EXYNOS3_ARM_L2_SYS_PWR_REG, { 0x0, 0x0, 0x3} },
+ { EXYNOS3_CMU_ACLKSTOP_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_CMU_SCLKSTOP_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_CMU_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_DRAM_FREQ_DOWN_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS3_DDRPHY_DLLOFF_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS3_LPDDR_PHY_DLL_LOCK_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS3_CMU_ACLKSTOP_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_SCLKSTOP_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_RESET_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_APLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_MPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_BPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_VPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_EPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_UPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS3_EPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_MPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_BPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_CLKSTOP_CAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_CLKSTOP_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_CLKSTOP_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_CLKSTOP_LCD0_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_CLKSTOP_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_CLKSTOP_MAUDIO_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_RESET_CAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_RESET_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_RESET_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_RESET_LCD0_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_RESET_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_RESET_MAUDIO_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_TOP_BUS_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
+ { EXYNOS3_TOP_RETENTION_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS3_TOP_PWR_SYS_PWR_REG, { 0x3, 0x3, 0x3} },
+ { EXYNOS3_TOP_BUS_COREBLK_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
+ { EXYNOS3_TOP_RETENTION_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS3_TOP_PWR_COREBLK_SYS_PWR_REG, { 0x3, 0x3, 0x3} },
+ { EXYNOS3_LOGIC_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_OSCCLK_GATE_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS3_LOGIC_RESET_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_OSCCLK_GATE_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
+ { EXYNOS3_PAD_RETENTION_DRAM_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_MAUDIO_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_GPIO_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_UART_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_MMC0_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_MMC1_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_MMC2_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_SPI_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_EBIA_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_EBIB_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_JTAG_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_ISOLATION_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_ALV_SEL_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_XUSBXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_XXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_EXT_REGULATOR_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_EXT_REGULATOR_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_GPIO_MODE_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_GPIO_MODE_MAUDIO_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_TOP_ASB_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_TOP_ASB_ISOLATION_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_TOP_ASB_RESET_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_TOP_ASB_ISOLATION_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_CAM_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS3_MFC_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS3_G3D_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS3_LCD0_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS3_ISP_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS3_MAUDIO_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS3_CMU_SYSCLK_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { PMU_TABLE_END,},
+};
+
+static unsigned int const exynos3250_list_feed[] = {
+ EXYNOS3_ARM_CORE_OPTION(0),
+ EXYNOS3_ARM_CORE_OPTION(1),
+ EXYNOS3_ARM_CORE_OPTION(2),
+ EXYNOS3_ARM_CORE_OPTION(3),
+ EXYNOS3_ARM_COMMON_OPTION,
+ EXYNOS3_TOP_PWR_OPTION,
+ EXYNOS3_CORE_TOP_PWR_OPTION,
+ S5P_CAM_OPTION,
+ S5P_MFC_OPTION,
+ S5P_G3D_OPTION,
+ S5P_LCD0_OPTION,
+ S5P_ISP_OPTION,
+};
+
+static void exynos3250_powerdown_conf_extra(enum sys_powerdown mode)
+{
+ unsigned int i;
+ unsigned int tmp;
+
+ /* Enable only SC_FEEDBACK */
+ for (i = 0; i < ARRAY_SIZE(exynos3250_list_feed); i++) {
+ tmp = pmu_raw_readl(exynos3250_list_feed[i]);
+ tmp &= ~(EXYNOS3_OPTION_USE_SC_COUNTER);
+ tmp |= EXYNOS3_OPTION_USE_SC_FEEDBACK;
+ pmu_raw_writel(tmp, exynos3250_list_feed[i]);
+ }
+
+ if (mode != SYS_SLEEP)
+ return;
+
+ pmu_raw_writel(XUSBXTI_DURATION, EXYNOS3_XUSBXTI_DURATION);
+ pmu_raw_writel(XXTI_DURATION, EXYNOS3_XXTI_DURATION);
+ pmu_raw_writel(EXT_REGULATOR_DURATION, EXYNOS3_EXT_REGULATOR_DURATION);
+ pmu_raw_writel(EXT_REGULATOR_COREBLK_DURATION,
+ EXYNOS3_EXT_REGULATOR_COREBLK_DURATION);
+}
+
+static void exynos3250_pmu_init(void)
+{
+ unsigned int value;
+
+ /*
+ * To prevent from issuing new bus request form L2 memory system
+ * If core status is power down, should be set '1' to L2 power down
+ */
+ value = pmu_raw_readl(EXYNOS3_ARM_COMMON_OPTION);
+ value |= EXYNOS3_OPTION_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
+ pmu_raw_writel(value, EXYNOS3_ARM_COMMON_OPTION);
+
+ /* Enable USE_STANDBY_WFI for all CORE */
+ pmu_raw_writel(S5P_USE_STANDBY_WFI_ALL, S5P_CENTRAL_SEQ_OPTION);
+
+ /*
+ * Set PSHOLD port for output high
+ */
+ value = pmu_raw_readl(S5P_PS_HOLD_CONTROL);
+ value |= S5P_PS_HOLD_OUTPUT_HIGH;
+ pmu_raw_writel(value, S5P_PS_HOLD_CONTROL);
+
+ /*
+ * Enable signal for PSHOLD port
+ */
+ value = pmu_raw_readl(S5P_PS_HOLD_CONTROL);
+ value |= S5P_PS_HOLD_EN;
+ pmu_raw_writel(value, S5P_PS_HOLD_CONTROL);
+}
+
+const struct exynos_pmu_data exynos3250_pmu_data = {
+ .pmu_config = exynos3250_pmu_config,
+ .pmu_init = exynos3250_pmu_init,
+ .powerdown_conf_extra = exynos3250_powerdown_conf_extra,
+};
diff --git a/drivers/soc/samsung/exynos4-pmu.c b/drivers/soc/samsung/exynos4-pmu.c
new file mode 100644
index 0000000000..f8092190b9
--- /dev/null
+++ b/drivers/soc/samsung/exynos4-pmu.c
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2011-2015 Samsung Electronics Co., Ltd.
+// http://www.samsung.com/
+//
+// Exynos4 - CPU PMU(Power Management Unit) support
+
+#include <linux/soc/samsung/exynos-regs-pmu.h>
+#include <linux/soc/samsung/exynos-pmu.h>
+
+#include "exynos-pmu.h"
+
+static const struct exynos_pmu_conf exynos4210_pmu_config[] = {
+ /* { .offset = offset, .val = { AFTR, LPA, SLEEP } */
+ { S5P_ARM_CORE0_LOWPWR, { 0x0, 0x0, 0x2 } },
+ { S5P_DIS_IRQ_CORE0, { 0x0, 0x0, 0x0 } },
+ { S5P_DIS_IRQ_CENTRAL0, { 0x0, 0x0, 0x0 } },
+ { S5P_ARM_CORE1_LOWPWR, { 0x0, 0x0, 0x2 } },
+ { S5P_DIS_IRQ_CORE1, { 0x0, 0x0, 0x0 } },
+ { S5P_DIS_IRQ_CENTRAL1, { 0x0, 0x0, 0x0 } },
+ { S5P_ARM_COMMON_LOWPWR, { 0x0, 0x0, 0x2 } },
+ { S5P_L2_0_LOWPWR, { 0x2, 0x2, 0x3 } },
+ { S5P_L2_1_LOWPWR, { 0x2, 0x2, 0x3 } },
+ { S5P_CMU_ACLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_SCLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_APLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_MPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_VPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_EPLL_SYSCLK_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_GPSALIVE_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_CAM_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_TV_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_MFC_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_G3D_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_LCD0_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_LCD1_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_CLKSTOP_GPS_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_CAM_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_TV_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_MFC_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_G3D_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_LCD0_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_LCD1_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_GPS_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_TOP_BUS_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_TOP_RETENTION_LOWPWR, { 0x1, 0x0, 0x1 } },
+ { S5P_TOP_PWR_LOWPWR, { 0x3, 0x0, 0x3 } },
+ { S5P_LOGIC_RESET_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_ONENAND_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_MODIMIF_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_G2D_ACP_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_USBOTG_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_HSMMC_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_CSSYS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_SECSS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_PCIE_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_SATA_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_DRAM_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_PAD_RETENTION_GPIO_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_UART_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_MMCA_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_MMCB_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_EBIA_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_EBIB_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_ISOLATION_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_ALV_SEL_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_XUSBXTI_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_XXTI_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_EXT_REGULATOR_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_GPIO_MODE_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_GPIO_MODE_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CAM_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_TV_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_MFC_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_G3D_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_LCD0_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_LCD1_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_MAUDIO_LOWPWR, { 0x7, 0x7, 0x0 } },
+ { S5P_GPS_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_GPS_ALIVE_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { PMU_TABLE_END,},
+};
+
+static const struct exynos_pmu_conf exynos4x12_pmu_config[] = {
+ { S5P_ARM_CORE0_LOWPWR, { 0x0, 0x0, 0x2 } },
+ { S5P_DIS_IRQ_CORE0, { 0x0, 0x0, 0x0 } },
+ { S5P_DIS_IRQ_CENTRAL0, { 0x0, 0x0, 0x0 } },
+ { S5P_ARM_CORE1_LOWPWR, { 0x0, 0x0, 0x2 } },
+ { S5P_DIS_IRQ_CORE1, { 0x0, 0x0, 0x0 } },
+ { S5P_DIS_IRQ_CENTRAL1, { 0x0, 0x0, 0x0 } },
+ { S5P_ISP_ARM_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR, { 0x0, 0x0, 0x0 } },
+ { S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR, { 0x0, 0x0, 0x0 } },
+ { S5P_ARM_COMMON_LOWPWR, { 0x0, 0x0, 0x2 } },
+ { S5P_L2_0_LOWPWR, { 0x0, 0x0, 0x3 } },
+ /* XXX_OPTION register should be set other field */
+ { S5P_ARM_L2_0_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_L2_1_LOWPWR, { 0x0, 0x0, 0x3 } },
+ { S5P_ARM_L2_1_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_CMU_ACLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_SCLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_DRAM_FREQ_DOWN_LOWPWR, { 0x1, 0x1, 0x1 } },
+ { S5P_DDRPHY_DLLOFF_LOWPWR, { 0x1, 0x1, 0x1 } },
+ { S5P_LPDDR_PHY_DLL_LOCK_LOWPWR, { 0x1, 0x1, 0x1 } },
+ { S5P_CMU_ACLKSTOP_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_SCLKSTOP_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_COREBLK_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_APLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_MPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_VPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_EPLL_SYSCLK_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_MPLLUSER_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_GPSALIVE_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_CAM_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_TV_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_MFC_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_G3D_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_LCD0_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_ISP_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_MAUDIO_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_CLKSTOP_GPS_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_CAM_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_TV_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_MFC_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_G3D_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_LCD0_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_ISP_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_RESET_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_CMU_RESET_GPS_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_TOP_BUS_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_TOP_RETENTION_LOWPWR, { 0x1, 0x0, 0x1 } },
+ { S5P_TOP_PWR_LOWPWR, { 0x3, 0x0, 0x3 } },
+ { S5P_TOP_BUS_COREBLK_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_TOP_RETENTION_COREBLK_LOWPWR, { 0x1, 0x0, 0x1 } },
+ { S5P_TOP_PWR_COREBLK_LOWPWR, { 0x3, 0x0, 0x3 } },
+ { S5P_LOGIC_RESET_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_OSCCLK_GATE_LOWPWR, { 0x1, 0x0, 0x1 } },
+ { S5P_LOGIC_RESET_COREBLK_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_OSCCLK_GATE_COREBLK_LOWPWR, { 0x1, 0x0, 0x1 } },
+ { S5P_ONENAND_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_ONENAND_MEM_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_HSI_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_HSI_MEM_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_G2D_ACP_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_G2D_ACP_MEM_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_USBOTG_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_USBOTG_MEM_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_HSMMC_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_HSMMC_MEM_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_CSSYS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_CSSYS_MEM_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_SECSS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_SECSS_MEM_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_ROTATOR_MEM_LOWPWR, { 0x3, 0x0, 0x0 } },
+ { S5P_ROTATOR_MEM_OPTION, { 0x10, 0x10, 0x0 } },
+ { S5P_PAD_RETENTION_DRAM_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_PAD_RETENTION_GPIO_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_UART_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_MMCA_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_MMCB_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_EBIA_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_EBIB_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_ISOLATION_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_ISOLATION_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_PAD_RETENTION_ALV_SEL_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_XUSBXTI_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_XXTI_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_EXT_REGULATOR_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_GPIO_MODE_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_GPIO_MODE_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_GPIO_MODE_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } },
+ { S5P_TOP_ASB_RESET_LOWPWR, { 0x1, 0x1, 0x1 } },
+ { S5P_TOP_ASB_ISOLATION_LOWPWR, { 0x1, 0x0, 0x1 } },
+ { S5P_CAM_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_TV_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_MFC_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_G3D_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_LCD0_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_ISP_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_MAUDIO_LOWPWR, { 0x7, 0x7, 0x0 } },
+ { S5P_GPS_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_GPS_ALIVE_LOWPWR, { 0x7, 0x0, 0x0 } },
+ { S5P_CMU_SYSCLK_ISP_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { S5P_CMU_SYSCLK_GPS_LOWPWR, { 0x1, 0x0, 0x0 } },
+ { PMU_TABLE_END,},
+};
+
+static const struct exynos_pmu_conf exynos4412_pmu_config[] = {
+ { S5P_ARM_CORE2_LOWPWR, { 0x0, 0x0, 0x2 } },
+ { S5P_DIS_IRQ_CORE2, { 0x0, 0x0, 0x0 } },
+ { S5P_DIS_IRQ_CENTRAL2, { 0x0, 0x0, 0x0 } },
+ { S5P_ARM_CORE3_LOWPWR, { 0x0, 0x0, 0x2 } },
+ { S5P_DIS_IRQ_CORE3, { 0x0, 0x0, 0x0 } },
+ { S5P_DIS_IRQ_CENTRAL3, { 0x0, 0x0, 0x0 } },
+ { PMU_TABLE_END,},
+};
+
+const struct exynos_pmu_data exynos4210_pmu_data = {
+ .pmu_config = exynos4210_pmu_config,
+};
+
+const struct exynos_pmu_data exynos4212_pmu_data = {
+ .pmu_config = exynos4x12_pmu_config,
+};
+
+const struct exynos_pmu_data exynos4412_pmu_data = {
+ .pmu_config = exynos4x12_pmu_config,
+ .pmu_config_extra = exynos4412_pmu_config,
+};
diff --git a/drivers/soc/samsung/exynos5250-pmu.c b/drivers/soc/samsung/exynos5250-pmu.c
new file mode 100644
index 0000000000..7a2d50be6b
--- /dev/null
+++ b/drivers/soc/samsung/exynos5250-pmu.c
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2011-2015 Samsung Electronics Co., Ltd.
+// http://www.samsung.com/
+//
+// Exynos5250 - CPU PMU (Power Management Unit) support
+
+#include <linux/soc/samsung/exynos-regs-pmu.h>
+#include <linux/soc/samsung/exynos-pmu.h>
+
+#include "exynos-pmu.h"
+
+static const struct exynos_pmu_conf exynos5250_pmu_config[] = {
+ /* { .offset = offset, .val = { AFTR, LPA, SLEEP } */
+ { EXYNOS5_ARM_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
+ { EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_ARM_CORE1_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
+ { EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_FSYS_ARM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_DIS_IRQ_FSYS_ARM_CENTRAL_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS5_ISP_ARM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_ARM_COMMON_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
+ { EXYNOS5_ARM_L2_SYS_PWR_REG, { 0x3, 0x3, 0x3} },
+ { EXYNOS_L2_OPTION(0), { 0x10, 0x10, 0x0 } },
+ { EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
+ { EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
+ { EXYNOS5_CMU_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
+ { EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
+ { EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS5_APLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_MPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_BPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_TOP_BUS_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
+ { EXYNOS5_TOP_RETENTION_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
+ { EXYNOS5_TOP_PWR_SYS_PWR_REG, { 0x3, 0x0, 0x3} },
+ { EXYNOS5_TOP_BUS_SYSMEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
+ { EXYNOS5_TOP_RETENTION_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
+ { EXYNOS5_TOP_PWR_SYSMEM_SYS_PWR_REG, { 0x3, 0x0, 0x3} },
+ { EXYNOS5_LOGIC_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_OSCCLK_GATE_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
+ { EXYNOS5_LOGIC_RESET_SYSMEM_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_OSCCLK_GATE_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
+ { EXYNOS5_USBOTG_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
+ { EXYNOS5_G2D_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
+ { EXYNOS5_USBDRD_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
+ { EXYNOS5_SDMMC_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
+ { EXYNOS5_CSSYS_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
+ { EXYNOS5_SECSS_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
+ { EXYNOS5_ROTATOR_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
+ { EXYNOS5_INTRAM_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
+ { EXYNOS5_INTROM_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
+ { EXYNOS5_JPEG_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
+ { EXYNOS5_JPEG_MEM_OPTION, { 0x10, 0x10, 0x0} },
+ { EXYNOS5_HSI_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
+ { EXYNOS5_MCUIOP_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
+ { EXYNOS5_SATA_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
+ { EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_PAD_RETENTION_GPIO_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_PAD_RETENTION_UART_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_PAD_RETENTION_MMCA_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_PAD_RETENTION_MMCB_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_PAD_RETENTION_EBIA_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_PAD_RETENTION_EBIB_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_PAD_RETENTION_SPI_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_PAD_RETENTION_GPIO_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_PAD_ISOLATION_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_PAD_ISOLATION_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_PAD_ALV_SEL_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_XUSBXTI_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS5_XXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_EXT_REGULATOR_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_GPIO_MODE_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_GPIO_MODE_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_GPIO_MODE_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_TOP_ASB_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS5_TOP_ASB_ISOLATION_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
+ { EXYNOS5_GSCL_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS5_ISP_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS5_MFC_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS5_G3D_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS5_DISP1_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS5_MAU_SYS_PWR_REG, { 0x7, 0x7, 0x0} },
+ { EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_CMU_CLKSTOP_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_CMU_CLKSTOP_DISP1_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_CMU_CLKSTOP_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_CMU_SYSCLK_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_CMU_SYSCLK_DISP1_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_CMU_SYSCLK_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_CMU_RESET_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_CMU_RESET_DISP1_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_CMU_RESET_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { PMU_TABLE_END,},
+};
+
+static unsigned int const exynos5_list_both_cnt_feed[] = {
+ EXYNOS5_ARM_CORE0_OPTION,
+ EXYNOS5_ARM_CORE1_OPTION,
+ EXYNOS5_ARM_COMMON_OPTION,
+ EXYNOS5_GSCL_OPTION,
+ EXYNOS5_ISP_OPTION,
+ EXYNOS5_MFC_OPTION,
+ EXYNOS5_G3D_OPTION,
+ EXYNOS5_DISP1_OPTION,
+ EXYNOS5_MAU_OPTION,
+ EXYNOS5_TOP_PWR_OPTION,
+ EXYNOS5_TOP_PWR_SYSMEM_OPTION,
+};
+
+static unsigned int const exynos5_list_disable_wfi_wfe[] = {
+ EXYNOS5_ARM_CORE1_OPTION,
+ EXYNOS5_FSYS_ARM_OPTION,
+ EXYNOS5_ISP_ARM_OPTION,
+};
+
+static void exynos5250_pmu_init(void)
+{
+ unsigned int value;
+ /*
+ * When SYS_WDTRESET is set, watchdog timer reset request
+ * is ignored by power management unit.
+ */
+ value = pmu_raw_readl(EXYNOS5_AUTO_WDTRESET_DISABLE);
+ value &= ~EXYNOS5_SYS_WDTRESET;
+ pmu_raw_writel(value, EXYNOS5_AUTO_WDTRESET_DISABLE);
+
+ value = pmu_raw_readl(EXYNOS5_MASK_WDTRESET_REQUEST);
+ value &= ~EXYNOS5_SYS_WDTRESET;
+ pmu_raw_writel(value, EXYNOS5_MASK_WDTRESET_REQUEST);
+}
+
+static void exynos5_powerdown_conf(enum sys_powerdown mode)
+{
+ unsigned int i;
+ unsigned int tmp;
+
+ /*
+ * Enable both SC_FEEDBACK and SC_COUNTER
+ */
+ for (i = 0; i < ARRAY_SIZE(exynos5_list_both_cnt_feed); i++) {
+ tmp = pmu_raw_readl(exynos5_list_both_cnt_feed[i]);
+ tmp |= (EXYNOS5_USE_SC_FEEDBACK |
+ EXYNOS5_USE_SC_COUNTER);
+ pmu_raw_writel(tmp, exynos5_list_both_cnt_feed[i]);
+ }
+
+ /*
+ * SKIP_DEACTIVATE_ACEACP_IN_PWDN_BITFIELD Enable
+ */
+ tmp = pmu_raw_readl(EXYNOS5_ARM_COMMON_OPTION);
+ tmp |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
+ pmu_raw_writel(tmp, EXYNOS5_ARM_COMMON_OPTION);
+
+ /*
+ * Disable WFI/WFE on XXX_OPTION
+ */
+ for (i = 0; i < ARRAY_SIZE(exynos5_list_disable_wfi_wfe); i++) {
+ tmp = pmu_raw_readl(exynos5_list_disable_wfi_wfe[i]);
+ tmp &= ~(EXYNOS5_OPTION_USE_STANDBYWFE |
+ EXYNOS5_OPTION_USE_STANDBYWFI);
+ pmu_raw_writel(tmp, exynos5_list_disable_wfi_wfe[i]);
+ }
+}
+
+const struct exynos_pmu_data exynos5250_pmu_data = {
+ .pmu_config = exynos5250_pmu_config,
+ .pmu_init = exynos5250_pmu_init,
+ .powerdown_conf = exynos5_powerdown_conf,
+};
diff --git a/drivers/soc/samsung/exynos5420-pmu.c b/drivers/soc/samsung/exynos5420-pmu.c
new file mode 100644
index 0000000000..6fedcd78cb
--- /dev/null
+++ b/drivers/soc/samsung/exynos5420-pmu.c
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2011-2015 Samsung Electronics Co., Ltd.
+// http://www.samsung.com/
+//
+// Exynos5420 - CPU PMU (Power Management Unit) support
+
+#include <linux/pm.h>
+#include <linux/soc/samsung/exynos-regs-pmu.h>
+#include <linux/soc/samsung/exynos-pmu.h>
+
+#include <asm/cputype.h>
+
+#include "exynos-pmu.h"
+
+static const struct exynos_pmu_conf exynos5420_pmu_config[] = {
+ /* { .offset = offset, .val = { AFTR, LPA, SLEEP } */
+ { EXYNOS5_ARM_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_ARM_CORE1_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_ARM_CORE2_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_DIS_IRQ_ARM_CORE2_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_DIS_IRQ_ARM_CORE2_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_ARM_CORE3_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_DIS_IRQ_ARM_CORE3_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_DIS_IRQ_ARM_CORE3_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_KFC_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_DIS_IRQ_KFC_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_DIS_IRQ_KFC_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_KFC_CORE1_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_DIS_IRQ_KFC_CORE1_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_DIS_IRQ_KFC_CORE1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_KFC_CORE2_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_DIS_IRQ_KFC_CORE2_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_DIS_IRQ_KFC_CORE2_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_KFC_CORE3_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_DIS_IRQ_KFC_CORE3_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_DIS_IRQ_KFC_CORE3_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_ISP_ARM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5420_ARM_COMMON_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_KFC_COMMON_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_ARM_L2_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_KFC_L2_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
+ { EXYNOS5_CMU_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
+ { EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
+ { EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
+ { EXYNOS5_APLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5420_DPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5420_IPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5420_KPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_MPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_BPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5420_RPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5420_SPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_TOP_BUS_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
+ { EXYNOS5_TOP_RETENTION_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS5_TOP_PWR_SYS_PWR_REG, { 0x3, 0x3, 0x0} },
+ { EXYNOS5_TOP_BUS_SYSMEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
+ { EXYNOS5_TOP_RETENTION_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
+ { EXYNOS5_TOP_PWR_SYSMEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
+ { EXYNOS5_LOGIC_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_OSCCLK_GATE_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
+ { EXYNOS5_LOGIC_RESET_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_OSCCLK_GATE_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5420_INTRAM_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x3} },
+ { EXYNOS5420_INTROM_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x3} },
+ { EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5420_PAD_RETENTION_JTAG_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5420_PAD_RETENTION_DRAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5420_PAD_RETENTION_UART_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5420_PAD_RETENTION_MMC0_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5420_PAD_RETENTION_MMC1_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5420_PAD_RETENTION_MMC2_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5420_PAD_RETENTION_HSI_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5420_PAD_RETENTION_EBIA_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5420_PAD_RETENTION_EBIB_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5420_PAD_RETENTION_SPI_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5420_PAD_RETENTION_DRAM_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_PAD_ISOLATION_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_PAD_ISOLATION_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_PAD_ALV_SEL_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_XUSBXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_XXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_EXT_REGULATOR_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_GPIO_MODE_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_GPIO_MODE_SYSMEM_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_GPIO_MODE_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_TOP_ASB_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_TOP_ASB_ISOLATION_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_GSCL_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS5_ISP_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS5_MFC_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS5_G3D_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS5420_DISP1_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS5420_MAU_SYS_PWR_REG, { 0x7, 0x7, 0x0} },
+ { EXYNOS5420_G2D_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS5420_MSC_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS5420_FSYS_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS5420_FSYS2_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS5420_PSGEN_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS5420_PERIC_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS5420_WCORE_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_CMU_CLKSTOP_MFC_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_CLKSTOP_DISP1_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_CLKSTOP_MAU_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_CLKSTOP_G2D_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_CLKSTOP_MSC_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_CLKSTOP_FSYS_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_CLKSTOP_PSGEN_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_CLKSTOP_PERIC_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_CLKSTOP_WCORE_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_CMU_SYSCLK_MFC_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_SYSCLK_DISP1_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_SYSCLK_MAU_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_SYSCLK_G2D_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_SYSCLK_MSC_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_SYSCLK_FSYS_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_SYSCLK_FSYS2_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_SYSCLK_PSGEN_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_SYSCLK_PERIC_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_SYSCLK_WCORE_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_RESET_FSYS2_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_RESET_PSGEN_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_RESET_PERIC_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_RESET_WCORE_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_CMU_RESET_MFC_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_RESET_DISP1_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_RESET_MAU_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_RESET_G2D_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_RESET_MSC_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { PMU_TABLE_END,},
+};
+
+static unsigned int const exynos5420_list_disable_pmu_reg[] = {
+ EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG,
+ EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG,
+ EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG,
+ EXYNOS5420_CMU_CLKSTOP_DISP1_SYS_PWR_REG,
+ EXYNOS5420_CMU_CLKSTOP_MAU_SYS_PWR_REG,
+ EXYNOS5420_CMU_CLKSTOP_G2D_SYS_PWR_REG,
+ EXYNOS5420_CMU_CLKSTOP_MSC_SYS_PWR_REG,
+ EXYNOS5420_CMU_CLKSTOP_FSYS_SYS_PWR_REG,
+ EXYNOS5420_CMU_CLKSTOP_PSGEN_SYS_PWR_REG,
+ EXYNOS5420_CMU_CLKSTOP_PERIC_SYS_PWR_REG,
+ EXYNOS5420_CMU_CLKSTOP_WCORE_SYS_PWR_REG,
+ EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG,
+ EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG,
+ EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG,
+ EXYNOS5420_CMU_SYSCLK_DISP1_SYS_PWR_REG,
+ EXYNOS5420_CMU_SYSCLK_MAU_SYS_PWR_REG,
+ EXYNOS5420_CMU_SYSCLK_G2D_SYS_PWR_REG,
+ EXYNOS5420_CMU_SYSCLK_MSC_SYS_PWR_REG,
+ EXYNOS5420_CMU_SYSCLK_FSYS_SYS_PWR_REG,
+ EXYNOS5420_CMU_SYSCLK_FSYS2_SYS_PWR_REG,
+ EXYNOS5420_CMU_SYSCLK_PSGEN_SYS_PWR_REG,
+ EXYNOS5420_CMU_SYSCLK_PERIC_SYS_PWR_REG,
+ EXYNOS5420_CMU_SYSCLK_WCORE_SYS_PWR_REG,
+ EXYNOS5420_CMU_RESET_FSYS2_SYS_PWR_REG,
+ EXYNOS5420_CMU_RESET_PSGEN_SYS_PWR_REG,
+ EXYNOS5420_CMU_RESET_PERIC_SYS_PWR_REG,
+ EXYNOS5420_CMU_RESET_WCORE_SYS_PWR_REG,
+ EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG,
+ EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG,
+ EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG,
+ EXYNOS5420_CMU_RESET_DISP1_SYS_PWR_REG,
+ EXYNOS5420_CMU_RESET_MAU_SYS_PWR_REG,
+ EXYNOS5420_CMU_RESET_G2D_SYS_PWR_REG,
+ EXYNOS5420_CMU_RESET_MSC_SYS_PWR_REG,
+ EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG,
+};
+
+static void exynos5420_powerdown_conf(enum sys_powerdown mode)
+{
+ u32 this_cluster;
+
+ this_cluster = MPIDR_AFFINITY_LEVEL(read_cpuid_mpidr(), 1);
+
+ /*
+ * set the cluster id to IROM register to ensure that we wake
+ * up with the current cluster.
+ */
+ pmu_raw_writel(this_cluster, EXYNOS_IROM_DATA2);
+}
+
+static void exynos5420_pmu_init(void)
+{
+ unsigned int value;
+ int i;
+
+ /*
+ * Set the CMU_RESET, CMU_SYSCLK and CMU_CLKSTOP registers
+ * for local power blocks to Low initially as per Table 8-4:
+ * "System-Level Power-Down Configuration Registers".
+ */
+ for (i = 0; i < ARRAY_SIZE(exynos5420_list_disable_pmu_reg); i++)
+ pmu_raw_writel(0, exynos5420_list_disable_pmu_reg[i]);
+
+ /* Enable USE_STANDBY_WFI for all CORE */
+ pmu_raw_writel(EXYNOS5420_USE_STANDBY_WFI_ALL, S5P_CENTRAL_SEQ_OPTION);
+
+ value = pmu_raw_readl(EXYNOS_L2_OPTION(0));
+ value &= ~EXYNOS_L2_USE_RETENTION;
+ pmu_raw_writel(value, EXYNOS_L2_OPTION(0));
+
+ value = pmu_raw_readl(EXYNOS_L2_OPTION(1));
+ value &= ~EXYNOS_L2_USE_RETENTION;
+ pmu_raw_writel(value, EXYNOS_L2_OPTION(1));
+
+ /*
+ * If L2_COMMON is turned off, clocks related to ATB async
+ * bridge are gated. Thus, when ISP power is gated, LPI
+ * may get stuck.
+ */
+ value = pmu_raw_readl(EXYNOS5420_LPI_MASK);
+ value |= EXYNOS5420_ATB_ISP_ARM;
+ pmu_raw_writel(value, EXYNOS5420_LPI_MASK);
+
+ value = pmu_raw_readl(EXYNOS5420_LPI_MASK1);
+ value |= EXYNOS5420_ATB_KFC;
+ pmu_raw_writel(value, EXYNOS5420_LPI_MASK1);
+
+ /* Prevent issue of new bus request from L2 memory */
+ value = pmu_raw_readl(EXYNOS5420_ARM_COMMON_OPTION);
+ value |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
+ pmu_raw_writel(value, EXYNOS5420_ARM_COMMON_OPTION);
+
+ value = pmu_raw_readl(EXYNOS5420_KFC_COMMON_OPTION);
+ value |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
+ pmu_raw_writel(value, EXYNOS5420_KFC_COMMON_OPTION);
+
+ /* This setting is to reduce suspend/resume time */
+ pmu_raw_writel(DUR_WAIT_RESET, EXYNOS5420_LOGIC_RESET_DURATION3);
+
+ /* Serialized CPU wakeup of Eagle */
+ pmu_raw_writel(SPREAD_ENABLE, EXYNOS5420_ARM_INTR_SPREAD_ENABLE);
+
+ pmu_raw_writel(SPREAD_USE_STANDWFI,
+ EXYNOS5420_ARM_INTR_SPREAD_USE_STANDBYWFI);
+
+ pmu_raw_writel(0x1, EXYNOS5420_UP_SCHEDULER);
+
+ pr_info("EXYNOS5420 PMU initialized\n");
+}
+
+const struct exynos_pmu_data exynos5420_pmu_data = {
+ .pmu_config = exynos5420_pmu_config,
+ .pmu_init = exynos5420_pmu_init,
+ .powerdown_conf = exynos5420_powerdown_conf,
+};
diff --git a/drivers/soc/samsung/exynos5422-asv.c b/drivers/soc/samsung/exynos5422-asv.c
new file mode 100644
index 0000000000..475ae52765
--- /dev/null
+++ b/drivers/soc/samsung/exynos5422-asv.c
@@ -0,0 +1,506 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Samsung Exynos 5422 SoC Adaptive Supply Voltage support
+ */
+
+#include <linux/bitrev.h>
+#include <linux/errno.h>
+#include <linux/regmap.h>
+#include <linux/soc/samsung/exynos-chipid.h>
+#include <linux/slab.h>
+
+#include "exynos-asv.h"
+#include "exynos5422-asv.h"
+
+#define ASV_GROUPS_NUM 14
+#define ASV_ARM_DVFS_NUM 20
+#define ASV_ARM_BIN2_DVFS_NUM 17
+#define ASV_KFC_DVFS_NUM 14
+#define ASV_KFC_BIN2_DVFS_NUM 12
+
+/*
+ * This array is a set of 4 ASV data tables, first column of each ASV table
+ * contains frequency value in MHz and subsequent columns contain the CPU
+ * cluster's supply voltage values in uV.
+ * In order to create a set of OPPs for specific SoC revision one of the voltage
+ * columns (1...14) from one of the tables (0...3) is selected during
+ * initialization. There are separate ASV tables for the big (ARM) and little
+ * (KFC) CPU cluster. Only OPPs which are already defined in devicetree
+ * will be updated.
+ */
+
+static const u32 asv_arm_table[][ASV_ARM_DVFS_NUM][ASV_GROUPS_NUM + 1] = {
+{
+ /* ARM 0, 1 */
+ { 2100, 1362500, 1362500, 1350000, 1337500, 1325000, 1312500, 1300000,
+ 1275000, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000 },
+ { 2000, 1312500, 1312500, 1300000, 1287500, 1275000, 1262500, 1250000,
+ 1237500, 1225000, 1237500, 1225000, 1212500, 1200000, 1187500 },
+ { 1900, 1250000, 1237500, 1225000, 1212500, 1200000, 1187500, 1175000,
+ 1162500, 1150000, 1162500, 1150000, 1137500, 1125000, 1112500 },
+ { 1800, 1200000, 1187500, 1175000, 1162500, 1150000, 1137500, 1125000,
+ 1112500, 1100000, 1112500, 1100000, 1087500, 1075000, 1062500 },
+ { 1700, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000, 1087500,
+ 1075000, 1062500, 1075000, 1062500, 1050000, 1037500, 1025000 },
+ { 1600, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500, 1050000,
+ 1037500, 1025000, 1037500, 1025000, 1012500, 1000000, 987500 },
+ { 1500, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500,
+ 1000000, 987500, 1000000, 987500, 975000, 962500, 950000 },
+ { 1400, 1062500, 1050000, 1037500, 1025000, 1012500, 1000000, 987500,
+ 975000, 962500, 975000, 962500, 950000, 937500, 925000 },
+ { 1300, 1050000, 1037500, 1025000, 1012500, 1000000, 987500, 975000,
+ 962500, 950000, 962500, 950000, 937500, 925000, 912500 },
+ { 1200, 1025000, 1012500, 1000000, 987500, 975000, 962500, 950000,
+ 937500, 925000, 937500, 925000, 912500, 900000, 900000 },
+ { 1100, 1000000, 987500, 975000, 962500, 950000, 937500, 925000,
+ 912500, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 1000, 975000, 962500, 950000, 937500, 925000, 912500, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 900, 950000, 937500, 925000, 912500, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 800, 925000, 912500, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 700, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 600, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 500, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 400, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 300, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 200, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+}, {
+ /* ARM 2 */
+ { 2100, 1362500, 1362500, 1350000, 1337500, 1325000, 1312500, 1300000,
+ 1275000, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000 },
+ { 2000, 1312500, 1312500, 1312500, 1300000, 1275000, 1262500, 1250000,
+ 1237500, 1225000, 1237500, 1225000, 1212500, 1200000, 1187500 },
+ { 1900, 1262500, 1250000, 1250000, 1237500, 1212500, 1200000, 1187500,
+ 1175000, 1162500, 1175000, 1162500, 1150000, 1137500, 1125000 },
+ { 1800, 1212500, 1200000, 1187500, 1175000, 1162500, 1150000, 1137500,
+ 1125000, 1112500, 1125000, 1112500, 1100000, 1087500, 1075000 },
+ { 1700, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000,
+ 1087500, 1075000, 1087500, 1075000, 1062500, 1050000, 1037500 },
+ { 1600, 1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500,
+ 1050000, 1037500, 1050000, 1037500, 1025000, 1012500, 1000000 },
+ { 1500, 1100000, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000,
+ 1012500, 1000000, 1012500, 1000000, 987500, 975000, 962500 },
+ { 1400, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500, 1000000,
+ 987500, 975000, 987500, 975000, 962500, 950000, 937500 },
+ { 1300, 1050000, 1037500, 1025000, 1012500, 1000000, 987500, 975000,
+ 962500, 950000, 962500, 950000, 937500, 925000, 912500 },
+ { 1200, 1025000, 1012500, 1000000, 987500, 975000, 962500, 950000,
+ 937500, 925000, 937500, 925000, 912500, 900000, 900000 },
+ { 1100, 1000000, 987500, 975000, 962500, 950000, 937500, 925000,
+ 912500, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 1000, 975000, 962500, 950000, 937500, 925000, 912500, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 900, 950000, 937500, 925000, 912500, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 800, 925000, 912500, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 700, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 600, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 500, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 400, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 300, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 200, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+}, {
+ /* ARM 3 */
+ { 2100, 1362500, 1362500, 1350000, 1337500, 1325000, 1312500, 1300000,
+ 1275000, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000 },
+ { 2000, 1312500, 1312500, 1300000, 1287500, 1275000, 1262500, 1250000,
+ 1237500, 1225000, 1237500, 1225000, 1212500, 1200000, 1187500 },
+ { 1900, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000, 1187500,
+ 1175000, 1162500, 1175000, 1162500, 1150000, 1137500, 1125000 },
+ { 1800, 1212500, 1200000, 1187500, 1175000, 1162500, 1150000, 1137500,
+ 1125000, 1112500, 1125000, 1112500, 1100000, 1087500, 1075000 },
+ { 1700, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000,
+ 1087500, 1075000, 1087500, 1075000, 1062500, 1050000, 1037500 },
+ { 1600, 1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500,
+ 1050000, 1037500, 1050000, 1037500, 1025000, 1012500, 1000000 },
+ { 1500, 1100000, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000,
+ 1012500, 1000000, 1012500, 1000000, 987500, 975000, 962500 },
+ { 1400, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500, 1000000,
+ 987500, 975000, 987500, 975000, 962500, 950000, 937500 },
+ { 1300, 1050000, 1037500, 1025000, 1012500, 1000000, 987500, 975000,
+ 962500, 950000, 962500, 950000, 937500, 925000, 912500 },
+ { 1200, 1025000, 1012500, 1000000, 987500, 975000, 962500, 950000,
+ 937500, 925000, 937500, 925000, 912500, 900000, 900000 },
+ { 1100, 1000000, 987500, 975000, 962500, 950000, 937500, 925000,
+ 912500, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 1000, 975000, 962500, 950000, 937500, 925000, 912500, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 900, 950000, 937500, 925000, 912500, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 800, 925000, 912500, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 700, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 600, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 500, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 400, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 300, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 200, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+}, {
+ /* ARM bin 2 */
+ { 1800, 1237500, 1225000, 1212500, 1200000, 1187500, 1175000, 1162500,
+ 1150000, 1137500, 1150000, 1137500, 1125000, 1112500, 1100000 },
+ { 1700, 1200000, 1187500, 1175000, 1162500, 1150000, 1137500, 1125000,
+ 1112500, 1100000, 1112500, 1100000, 1087500, 1075000, 1062500 },
+ { 1600, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000, 1087500,
+ 1075000, 1062500, 1075000, 1062500, 1050000, 1037500, 1025000 },
+ { 1500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500, 1050000,
+ 1037500, 1025000, 1037500, 1025000, 1012500, 1000000, 987500 },
+ { 1400, 1100000, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000,
+ 1012500, 1000000, 1012500, 1000000, 987500, 975000, 962500 },
+ { 1300, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500,
+ 1000000, 987500, 1000000, 987500, 975000, 962500, 950000 },
+ { 1200, 1062500, 1050000, 1037500, 1025000, 1012500, 1000000, 987500,
+ 975000, 962500, 975000, 962500, 950000, 937500, 925000 },
+ { 1100, 1037500, 1025000, 1012500, 1000000, 987500, 975000, 962500,
+ 950000, 937500, 950000, 937500, 925000, 912500, 900000 },
+ { 1000, 1012500, 1000000, 987500, 975000, 962500, 950000, 937500,
+ 925000, 912500, 925000, 912500, 900000, 900000, 900000 },
+ { 900, 987500, 975000, 962500, 950000, 937500, 925000, 912500,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 800, 962500, 950000, 937500, 925000, 912500, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 700, 937500, 925000, 912500, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 600, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 500, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 400, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 300, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 200, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+}
+};
+
+static const u32 asv_kfc_table[][ASV_KFC_DVFS_NUM][ASV_GROUPS_NUM + 1] = {
+{
+ /* KFC 0, 1 */
+ { 1500000, 1300000, 1300000, 1300000, 1287500, 1287500, 1287500, 1275000,
+ 1262500, 1250000, 1237500, 1225000, 1212500, 1200000, 1187500 },
+ { 1400000, 1275000, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000,
+ 1187500, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500 },
+ { 1300000, 1225000, 1212500, 1200000, 1187500, 1175000, 1162500, 1150000,
+ 1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500 },
+ { 1200000, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000,
+ 1087500, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500 },
+ { 1100000, 1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500,
+ 1050000, 1037500, 1025000, 1012500, 1000000, 987500, 975000 },
+ { 1000000, 1100000, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000,
+ 1012500, 1000000, 987500, 975000, 962500, 950000, 937500 },
+ { 900000, 1062500, 1050000, 1037500, 1025000, 1012500, 1000000, 987500,
+ 975000, 962500, 950000, 937500, 925000, 912500, 900000 },
+ { 800000, 1025000, 1012500, 1000000, 987500, 975000, 962500, 950000,
+ 937500, 925000, 912500, 900000, 900000, 900000, 900000 },
+ { 700000, 987500, 975000, 962500, 950000, 937500, 925000, 912500,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 600000, 950000, 937500, 925000, 912500, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 500000, 912500, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 400000, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 300000, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 200000, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+}, {
+ /* KFC 2 */
+ { 1500, 1300000, 1300000, 1300000, 1287500, 1287500, 1287500, 1275000,
+ 1262500, 1250000, 1237500, 1225000, 1212500, 1200000, 1187500 },
+ { 1400, 1275000, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000,
+ 1187500, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500 },
+ { 1300, 1225000, 1212500, 1200000, 1187500, 1175000, 1162500, 1150000,
+ 1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500 },
+ { 1200, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000,
+ 1087500, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500 },
+ { 1100, 1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500,
+ 1050000, 1037500, 1025000, 1012500, 1000000, 987500, 975000 },
+ { 1000, 1100000, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000,
+ 1012500, 1000000, 987500, 975000, 962500, 950000, 937500 },
+ { 900, 1062500, 1050000, 1037500, 1025000, 1012500, 1000000, 987500,
+ 975000, 962500, 950000, 937500, 925000, 912500, 900000 },
+ { 800, 1025000, 1012500, 1000000, 987500, 975000, 962500, 950000,
+ 937500, 925000, 912500, 900000, 900000, 900000, 900000 },
+ { 700, 987500, 975000, 962500, 950000, 937500, 925000, 912500,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 600, 950000, 937500, 925000, 912500, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 500, 912500, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 400, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 300, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 200, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+}, {
+ /* KFC 3 */
+ { 1500, 1300000, 1300000, 1300000, 1287500, 1287500, 1287500, 1275000,
+ 1262500, 1250000, 1237500, 1225000, 1212500, 1200000, 1187500 },
+ { 1400, 1275000, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000,
+ 1187500, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500 },
+ { 1300, 1225000, 1212500, 1200000, 1187500, 1175000, 1162500, 1150000,
+ 1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500 },
+ { 1200, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000,
+ 1087500, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500 },
+ { 1100, 1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500,
+ 1050000, 1037500, 1025000, 1012500, 1000000, 987500, 975000 },
+ { 1000, 1100000, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000,
+ 1012500, 1000000, 987500, 975000, 962500, 950000, 937500 },
+ { 900, 1062500, 1050000, 1037500, 1025000, 1012500, 1000000, 987500,
+ 975000, 962500, 950000, 937500, 925000, 912500, 900000 },
+ { 800, 1025000, 1012500, 1000000, 987500, 975000, 962500, 950000,
+ 937500, 925000, 912500, 900000, 900000, 900000, 900000 },
+ { 700, 987500, 975000, 962500, 950000, 937500, 925000, 912500,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 600, 950000, 937500, 925000, 912500, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 500, 912500, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 400, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 300, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 200, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+}, {
+ /* KFC bin 2 */
+ { 1300, 1250000, 1237500, 1225000, 1212500, 1200000, 1187500, 1175000,
+ 1162500, 1150000, 1137500, 1125000, 1112500, 1100000, 1087500 },
+ { 1200, 1200000, 1187500, 1175000, 1162500, 1150000, 1137500, 1125000,
+ 1112500, 1100000, 1087500, 1075000, 1062500, 1050000, 1037500 },
+ { 1100, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000, 1087500,
+ 1075000, 1062500, 1050000, 1037500, 1025000, 1012500, 1000000 },
+ { 1000, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500, 1050000,
+ 1037500, 1025000, 1012500, 1000000, 987500, 975000, 962500 },
+ { 900, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500,
+ 1000000, 987500, 975000, 962500, 950000, 937500, 925000 },
+ { 800, 1050000, 1037500, 1025000, 1012500, 1000000, 987500, 975000,
+ 962500, 950000, 937500, 925000, 912500, 900000, 900000 },
+ { 700, 1012500, 1000000, 987500, 975000, 962500, 950000, 937500,
+ 925000, 912500, 900000, 900000, 900000, 900000, 900000 },
+ { 600, 975000, 962500, 950000, 937500, 925000, 912500, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 500, 937500, 925000, 912500, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 400, 925000, 912500, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 300, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+ { 200, 900000, 900000, 900000, 900000, 900000, 900000, 900000,
+ 900000, 900000, 900000, 900000, 900000, 900000, 900000 },
+}
+};
+
+static const struct asv_limit_entry __asv_limits[ASV_GROUPS_NUM] = {
+ { 13, 55 },
+ { 21, 65 },
+ { 25, 69 },
+ { 30, 72 },
+ { 36, 74 },
+ { 43, 76 },
+ { 51, 78 },
+ { 65, 80 },
+ { 81, 82 },
+ { 98, 84 },
+ { 119, 87 },
+ { 135, 89 },
+ { 150, 92 },
+ { 999, 999 },
+};
+
+static int exynos5422_asv_get_group(struct exynos_asv *asv)
+{
+ unsigned int pkgid_reg, auxi_reg;
+ int hpm, ids, i;
+
+ regmap_read(asv->chipid_regmap, EXYNOS_CHIPID_REG_PKG_ID, &pkgid_reg);
+ regmap_read(asv->chipid_regmap, EXYNOS_CHIPID_REG_AUX_INFO, &auxi_reg);
+
+ if (asv->use_sg) {
+ u32 sga = (pkgid_reg >> EXYNOS5422_SG_A_OFFSET) &
+ EXYNOS5422_SG_A_MASK;
+
+ u32 sgb = (pkgid_reg >> EXYNOS5422_SG_B_OFFSET) &
+ EXYNOS5422_SG_B_MASK;
+
+ if ((pkgid_reg >> EXYNOS5422_SG_BSIGN_OFFSET) &
+ EXYNOS5422_SG_BSIGN_MASK)
+ return sga + sgb;
+ else
+ return sga - sgb;
+ }
+
+ hpm = (auxi_reg >> EXYNOS5422_TMCB_OFFSET) & EXYNOS5422_TMCB_MASK;
+ ids = (pkgid_reg >> EXYNOS5422_IDS_OFFSET) & EXYNOS5422_IDS_MASK;
+
+ for (i = 0; i < ASV_GROUPS_NUM; i++) {
+ if (ids <= __asv_limits[i].ids)
+ break;
+ if (hpm <= __asv_limits[i].hpm)
+ break;
+ }
+ if (i < ASV_GROUPS_NUM)
+ return i;
+
+ return 0;
+}
+
+static int __asv_offset_voltage(unsigned int index)
+{
+ switch (index) {
+ case 1:
+ return 12500;
+ case 2:
+ return 50000;
+ case 3:
+ return 25000;
+ default:
+ return 0;
+ }
+}
+
+static void exynos5422_asv_offset_voltage_setup(struct exynos_asv *asv)
+{
+ struct exynos_asv_subsys *subsys;
+ unsigned int reg, value;
+
+ regmap_read(asv->chipid_regmap, EXYNOS_CHIPID_REG_AUX_INFO, &reg);
+
+ /* ARM offset voltage setup */
+ subsys = &asv->subsys[EXYNOS_ASV_SUBSYS_ID_ARM];
+
+ subsys->base_volt = 1000000;
+
+ value = (reg >> EXYNOS5422_ARM_UP_OFFSET) & EXYNOS5422_ARM_UP_MASK;
+ subsys->offset_volt_h = __asv_offset_voltage(value);
+
+ value = (reg >> EXYNOS5422_ARM_DN_OFFSET) & EXYNOS5422_ARM_DN_MASK;
+ subsys->offset_volt_l = __asv_offset_voltage(value);
+
+ /* KFC offset voltage setup */
+ subsys = &asv->subsys[EXYNOS_ASV_SUBSYS_ID_KFC];
+
+ subsys->base_volt = 1000000;
+
+ value = (reg >> EXYNOS5422_KFC_UP_OFFSET) & EXYNOS5422_KFC_UP_MASK;
+ subsys->offset_volt_h = __asv_offset_voltage(value);
+
+ value = (reg >> EXYNOS5422_KFC_DN_OFFSET) & EXYNOS5422_KFC_DN_MASK;
+ subsys->offset_volt_l = __asv_offset_voltage(value);
+}
+
+static int exynos5422_asv_opp_get_voltage(const struct exynos_asv_subsys *subsys,
+ int level, unsigned int volt)
+{
+ unsigned int asv_volt;
+
+ if (level >= subsys->table.num_rows)
+ return volt;
+
+ asv_volt = exynos_asv_opp_get_voltage(subsys, level,
+ subsys->asv->group);
+
+ if (volt > subsys->base_volt)
+ asv_volt += subsys->offset_volt_h;
+ else
+ asv_volt += subsys->offset_volt_l;
+
+ return asv_volt;
+}
+
+static unsigned int exynos5422_asv_parse_table(unsigned int pkg_id)
+{
+ return (pkg_id >> EXYNOS5422_TABLE_OFFSET) & EXYNOS5422_TABLE_MASK;
+}
+
+static bool exynos5422_asv_parse_bin2(unsigned int pkg_id)
+{
+ return (pkg_id >> EXYNOS5422_BIN2_OFFSET) & EXYNOS5422_BIN2_MASK;
+}
+
+static bool exynos5422_asv_parse_sg(unsigned int pkg_id)
+{
+ return (pkg_id >> EXYNOS5422_USESG_OFFSET) & EXYNOS5422_USESG_MASK;
+}
+
+int exynos5422_asv_init(struct exynos_asv *asv)
+{
+ struct exynos_asv_subsys *subsys;
+ unsigned int table_index;
+ unsigned int pkg_id;
+ bool bin2;
+
+ regmap_read(asv->chipid_regmap, EXYNOS_CHIPID_REG_PKG_ID, &pkg_id);
+
+ if (asv->of_bin == 2) {
+ bin2 = true;
+ asv->use_sg = false;
+ } else {
+ asv->use_sg = exynos5422_asv_parse_sg(pkg_id);
+ bin2 = exynos5422_asv_parse_bin2(pkg_id);
+ }
+
+ asv->group = exynos5422_asv_get_group(asv);
+ asv->table = exynos5422_asv_parse_table(pkg_id);
+
+ exynos5422_asv_offset_voltage_setup(asv);
+
+ if (bin2) {
+ table_index = 3;
+ } else {
+ if (asv->table == 2 || asv->table == 3)
+ table_index = asv->table - 1;
+ else
+ table_index = 0;
+ }
+
+ subsys = &asv->subsys[EXYNOS_ASV_SUBSYS_ID_ARM];
+ subsys->cpu_dt_compat = "arm,cortex-a15";
+ if (bin2)
+ subsys->table.num_rows = ASV_ARM_BIN2_DVFS_NUM;
+ else
+ subsys->table.num_rows = ASV_ARM_DVFS_NUM;
+ subsys->table.num_cols = ASV_GROUPS_NUM + 1;
+ subsys->table.buf = (u32 *)asv_arm_table[table_index];
+
+ subsys = &asv->subsys[EXYNOS_ASV_SUBSYS_ID_KFC];
+ subsys->cpu_dt_compat = "arm,cortex-a7";
+ if (bin2)
+ subsys->table.num_rows = ASV_KFC_BIN2_DVFS_NUM;
+ else
+ subsys->table.num_rows = ASV_KFC_DVFS_NUM;
+ subsys->table.num_cols = ASV_GROUPS_NUM + 1;
+ subsys->table.buf = (u32 *)asv_kfc_table[table_index];
+
+ asv->opp_get_voltage = exynos5422_asv_opp_get_voltage;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(exynos5422_asv_init);
diff --git a/drivers/soc/samsung/exynos5422-asv.h b/drivers/soc/samsung/exynos5422-asv.h
new file mode 100644
index 0000000000..95a5fb1a75
--- /dev/null
+++ b/drivers/soc/samsung/exynos5422-asv.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2019 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Samsung Exynos 5422 SoC Adaptive Supply Voltage support
+ */
+
+#ifndef __LINUX_SOC_EXYNOS5422_ASV_H
+#define __LINUX_SOC_EXYNOS5422_ASV_H
+
+#include <linux/errno.h>
+
+enum {
+ EXYNOS_ASV_SUBSYS_ID_ARM,
+ EXYNOS_ASV_SUBSYS_ID_KFC,
+ EXYNOS_ASV_SUBSYS_ID_MAX
+};
+
+struct exynos_asv;
+
+#ifdef CONFIG_EXYNOS_ASV_ARM
+int exynos5422_asv_init(struct exynos_asv *asv);
+#else
+static inline int exynos5422_asv_init(struct exynos_asv *asv)
+{
+ return -ENOTSUPP;
+}
+#endif
+
+#endif /* __LINUX_SOC_EXYNOS5422_ASV_H */
diff --git a/drivers/soc/samsung/s3c-pm-check.c b/drivers/soc/samsung/s3c-pm-check.c
new file mode 100644
index 0000000000..439d5c3725
--- /dev/null
+++ b/drivers/soc/samsung/s3c-pm-check.c
@@ -0,0 +1,233 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// originally in linux/arch/arm/plat-s3c24xx/pm.c
+//
+// Copyright (c) 2004-2008 Simtec Electronics
+// http://armlinux.simtec.co.uk
+// Ben Dooks <ben@simtec.co.uk>
+//
+// S3C Power Mangament - suspend/resume memory corruption check.
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+#include <linux/init.h>
+#include <linux/crc32.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+
+#include <linux/soc/samsung/s3c-pm.h>
+
+#if CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE < 1
+#error CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE must be a positive non-zero value
+#endif
+
+/* suspend checking code...
+ *
+ * this next area does a set of crc checks over all the installed
+ * memory, so the system can verify if the resume was ok.
+ *
+ * CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
+ * increasing it will mean that the area corrupted will be less easy to spot,
+ * and reducing the size will cause the CRC save area to grow
+*/
+
+#define CHECK_CHUNKSIZE (CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE * 1024)
+
+static u32 crc_size; /* size needed for the crc block */
+static u32 *crcs; /* allocated over suspend/resume */
+
+typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg);
+
+/* s3c_pm_run_res
+ *
+ * go through the given resource list, and look for system ram
+*/
+
+static void s3c_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg)
+{
+ while (ptr != NULL) {
+ if (ptr->child != NULL)
+ s3c_pm_run_res(ptr->child, fn, arg);
+
+ if ((ptr->flags & IORESOURCE_SYSTEM_RAM)
+ == IORESOURCE_SYSTEM_RAM) {
+ S3C_PMDBG("Found system RAM at %08lx..%08lx\n",
+ (unsigned long)ptr->start,
+ (unsigned long)ptr->end);
+ arg = (fn)(ptr, arg);
+ }
+
+ ptr = ptr->sibling;
+ }
+}
+
+static void s3c_pm_run_sysram(run_fn_t fn, u32 *arg)
+{
+ s3c_pm_run_res(&iomem_resource, fn, arg);
+}
+
+static u32 *s3c_pm_countram(struct resource *res, u32 *val)
+{
+ u32 size = (u32)resource_size(res);
+
+ size += CHECK_CHUNKSIZE-1;
+ size /= CHECK_CHUNKSIZE;
+
+ S3C_PMDBG("Area %08lx..%08lx, %d blocks\n",
+ (unsigned long)res->start, (unsigned long)res->end, size);
+
+ *val += size * sizeof(u32);
+ return val;
+}
+
+/* s3c_pm_prepare_check
+ *
+ * prepare the necessary information for creating the CRCs. This
+ * must be done before the final save, as it will require memory
+ * allocating, and thus touching bits of the kernel we do not
+ * know about.
+*/
+
+void s3c_pm_check_prepare(void)
+{
+ crc_size = 0;
+
+ s3c_pm_run_sysram(s3c_pm_countram, &crc_size);
+
+ S3C_PMDBG("s3c_pm_prepare_check: %u checks needed\n", crc_size);
+
+ crcs = kmalloc(crc_size+4, GFP_KERNEL);
+ if (crcs == NULL)
+ printk(KERN_ERR "Cannot allocated CRC save area\n");
+}
+
+static u32 *s3c_pm_makecheck(struct resource *res, u32 *val)
+{
+ unsigned long addr, left;
+
+ for (addr = res->start; addr < res->end;
+ addr += CHECK_CHUNKSIZE) {
+ left = res->end - addr;
+
+ if (left > CHECK_CHUNKSIZE)
+ left = CHECK_CHUNKSIZE;
+
+ *val = crc32_le(~0, phys_to_virt(addr), left);
+ val++;
+ }
+
+ return val;
+}
+
+/* s3c_pm_check_store
+ *
+ * compute the CRC values for the memory blocks before the final
+ * sleep.
+*/
+
+void s3c_pm_check_store(void)
+{
+ if (crcs != NULL)
+ s3c_pm_run_sysram(s3c_pm_makecheck, crcs);
+}
+
+/* in_region
+ *
+ * return TRUE if the area defined by ptr..ptr+size contains the
+ * what..what+whatsz
+*/
+
+static inline int in_region(void *ptr, int size, void *what, size_t whatsz)
+{
+ if ((what+whatsz) < ptr)
+ return 0;
+
+ if (what > (ptr+size))
+ return 0;
+
+ return 1;
+}
+
+/**
+ * s3c_pm_runcheck() - helper to check a resource on restore.
+ * @res: The resource to check
+ * @val: Pointer to list of CRC32 values to check.
+ *
+ * Called from the s3c_pm_check_restore() via s3c_pm_run_sysram(), this
+ * function runs the given memory resource checking it against the stored
+ * CRC to ensure that memory is restored. The function tries to skip as
+ * many of the areas used during the suspend process.
+ */
+static u32 *s3c_pm_runcheck(struct resource *res, u32 *val)
+{
+ unsigned long addr;
+ unsigned long left;
+ void *stkpage;
+ void *ptr;
+ u32 calc;
+
+ stkpage = (void *)((u32)&calc & ~PAGE_MASK);
+
+ for (addr = res->start; addr < res->end;
+ addr += CHECK_CHUNKSIZE) {
+ left = res->end - addr;
+
+ if (left > CHECK_CHUNKSIZE)
+ left = CHECK_CHUNKSIZE;
+
+ ptr = phys_to_virt(addr);
+
+ if (in_region(ptr, left, stkpage, 4096)) {
+ S3C_PMDBG("skipping %08lx, has stack in\n", addr);
+ goto skip_check;
+ }
+
+ if (in_region(ptr, left, crcs, crc_size)) {
+ S3C_PMDBG("skipping %08lx, has crc block in\n", addr);
+ goto skip_check;
+ }
+
+ /* calculate and check the checksum */
+
+ calc = crc32_le(~0, ptr, left);
+ if (calc != *val) {
+ printk(KERN_ERR "Restore CRC error at "
+ "%08lx (%08x vs %08x)\n", addr, calc, *val);
+
+ S3C_PMDBG("Restore CRC error at %08lx (%08x vs %08x)\n",
+ addr, calc, *val);
+ }
+
+ skip_check:
+ val++;
+ }
+
+ return val;
+}
+
+/**
+ * s3c_pm_check_restore() - memory check called on resume
+ *
+ * check the CRCs after the restore event and free the memory used
+ * to hold them
+*/
+void s3c_pm_check_restore(void)
+{
+ if (crcs != NULL)
+ s3c_pm_run_sysram(s3c_pm_runcheck, crcs);
+}
+
+/**
+ * s3c_pm_check_cleanup() - free memory resources
+ *
+ * Free the resources that where allocated by the suspend
+ * memory check code. We do this separately from the
+ * s3c_pm_check_restore() function as we cannot call any
+ * functions that might sleep during that resume.
+ */
+void s3c_pm_check_cleanup(void)
+{
+ kfree(crcs);
+ crcs = NULL;
+}
+
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 03:00:09 +0000