summaryrefslogtreecommitdiffstats
path: root/drivers/spi/spi-bcm2835.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi/spi-bcm2835.c')
-rw-r--r--drivers/spi/spi-bcm2835.c69
1 files changed, 36 insertions, 33 deletions
diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c
index e7bb271467..e709887eb2 100644
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -11,6 +11,7 @@
* spi-atmel.c, Copyright (C) 2006 Atmel Corporation
*/
+#include <linux/cleanup.h>
#include <linux/clk.h>
#include <linux/completion.h>
#include <linux/debugfs.h>
@@ -26,9 +27,10 @@
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/gpio/consumer.h>
-#include <linux/gpio/machine.h> /* FIXME: using chip internals */
-#include <linux/gpio/driver.h> /* FIXME: using chip internals */
+#include <linux/gpio/machine.h> /* FIXME: using GPIO lookup tables */
#include <linux/of_irq.h>
+#include <linux/overflow.h>
+#include <linux/slab.h>
#include <linux/spi/spi.h>
/* SPI register offsets */
@@ -83,6 +85,7 @@ MODULE_PARM_DESC(polling_limit_us,
* struct bcm2835_spi - BCM2835 SPI controller
* @regs: base address of register map
* @clk: core clock, divided to calculate serial clock
+ * @cs_gpio: chip-select GPIO descriptor
* @clk_hz: core clock cached speed
* @irq: interrupt, signals TX FIFO empty or RX FIFO ¾ full
* @tfr: SPI transfer currently processed
@@ -117,6 +120,7 @@ MODULE_PARM_DESC(polling_limit_us,
struct bcm2835_spi {
void __iomem *regs;
struct clk *clk;
+ struct gpio_desc *cs_gpio;
unsigned long clk_hz;
int irq;
struct spi_transfer *tfr;
@@ -1156,15 +1160,11 @@ static void bcm2835_spi_handle_err(struct spi_controller *ctlr,
bcm2835_spi_reset_hw(bs);
}
-static int chip_match_name(struct gpio_chip *chip, void *data)
-{
- return !strcmp(chip->label, data);
-}
-
static void bcm2835_spi_cleanup(struct spi_device *spi)
{
struct bcm2835_spidev *target = spi_get_ctldata(spi);
struct spi_controller *ctlr = spi->controller;
+ struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr);
if (target->clear_rx_desc)
dmaengine_desc_free(target->clear_rx_desc);
@@ -1175,6 +1175,9 @@ static void bcm2835_spi_cleanup(struct spi_device *spi)
sizeof(u32),
DMA_TO_DEVICE);
+ gpiod_put(bs->cs_gpio);
+ spi_set_csgpiod(spi, 0, NULL);
+
kfree(target);
}
@@ -1221,7 +1224,7 @@ static int bcm2835_spi_setup(struct spi_device *spi)
struct spi_controller *ctlr = spi->controller;
struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr);
struct bcm2835_spidev *target = spi_get_ctldata(spi);
- struct gpio_chip *chip;
+ struct gpiod_lookup_table *lookup __free(kfree) = NULL;
int ret;
u32 cs;
@@ -1288,29 +1291,36 @@ static int bcm2835_spi_setup(struct spi_device *spi)
}
/*
- * Translate native CS to GPIO
+ * TODO: The code below is a slightly better alternative to the utter
+ * abuse of the GPIO API that I found here before. It creates a
+ * temporary lookup table, assigns it to the SPI device, gets the GPIO
+ * descriptor and then releases the lookup table.
*
- * FIXME: poking around in the gpiolib internals like this is
- * not very good practice. Find a way to locate the real problem
- * and fix it. Why is the GPIO descriptor in spi->cs_gpiod
- * sometimes not assigned correctly? Erroneous device trees?
+ * More on the problem that it addresses:
+ * https://www.spinics.net/lists/linux-gpio/msg36218.html
*/
+ lookup = kzalloc(struct_size(lookup, table, 2), GFP_KERNEL);
+ if (!lookup) {
+ ret = -ENOMEM;
+ goto err_cleanup;
+ }
- /* get the gpio chip for the base */
- chip = gpiochip_find("pinctrl-bcm2835", chip_match_name);
- if (!chip)
- return 0;
+ lookup->dev_id = dev_name(&spi->dev);
+ lookup->table[0] = GPIO_LOOKUP("pinctrl-bcm2835",
+ 8 - (spi_get_chipselect(spi, 0)),
+ "cs", GPIO_LOOKUP_FLAGS_DEFAULT);
+
+ gpiod_add_lookup_table(lookup);
- spi_set_csgpiod(spi, 0, gpiochip_request_own_desc(chip,
- 8 - (spi_get_chipselect(spi, 0)),
- DRV_NAME,
- GPIO_LOOKUP_FLAGS_DEFAULT,
- GPIOD_OUT_LOW));
- if (IS_ERR(spi_get_csgpiod(spi, 0))) {
- ret = PTR_ERR(spi_get_csgpiod(spi, 0));
+ bs->cs_gpio = gpiod_get(&spi->dev, "cs", GPIOD_OUT_LOW);
+ gpiod_remove_lookup_table(lookup);
+ if (IS_ERR(bs->cs_gpio)) {
+ ret = PTR_ERR(bs->cs_gpio);
goto err_cleanup;
}
+ spi_set_csgpiod(spi, 0, bs->cs_gpio);
+
/* and set up the "mode" and level */
dev_info(&spi->dev, "setting up native-CS%i to use GPIO\n",
spi_get_chipselect(spi, 0));
@@ -1352,7 +1362,7 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
if (IS_ERR(bs->regs))
return PTR_ERR(bs->regs);
- bs->clk = devm_clk_get(&pdev->dev, NULL);
+ bs->clk = devm_clk_get_enabled(&pdev->dev, NULL);
if (IS_ERR(bs->clk))
return dev_err_probe(&pdev->dev, PTR_ERR(bs->clk),
"could not get clk\n");
@@ -1363,14 +1373,11 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
if (bs->irq < 0)
return bs->irq;
- err = clk_prepare_enable(bs->clk);
- if (err)
- return err;
bs->clk_hz = clk_get_rate(bs->clk);
err = bcm2835_dma_init(ctlr, &pdev->dev, bs);
if (err)
- goto out_clk_disable;
+ return err;
/* initialise the hardware with the default polarities */
bcm2835_wr(bs, BCM2835_SPI_CS,
@@ -1396,8 +1403,6 @@ static int bcm2835_spi_probe(struct platform_device *pdev)
out_dma_release:
bcm2835_dma_release(ctlr, bs);
-out_clk_disable:
- clk_disable_unprepare(bs->clk);
return err;
}
@@ -1415,8 +1420,6 @@ static void bcm2835_spi_remove(struct platform_device *pdev)
/* Clear FIFOs, and disable the HW block */
bcm2835_wr(bs, BCM2835_SPI_CS,
BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX);
-
- clk_disable_unprepare(bs->clk);
}
static const struct of_device_id bcm2835_spi_match[] = {