summaryrefslogtreecommitdiffstats
path: root/drivers/spi/spi-davinci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi/spi-davinci.c')
-rw-r--r--drivers/spi/spi-davinci.c1042
1 files changed, 1042 insertions, 0 deletions
diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c
new file mode 100644
index 0000000000..c457b550d3
--- /dev/null
+++ b/drivers/spi/spi-davinci.c
@@ -0,0 +1,1042 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2009 Texas Instruments.
+ * Copyright (C) 2010 EF Johnson Technologies
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/of.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+#include <linux/slab.h>
+
+#include <linux/platform_data/spi-davinci.h>
+
+#define CS_DEFAULT 0xFF
+
+#define SPIFMT_PHASE_MASK BIT(16)
+#define SPIFMT_POLARITY_MASK BIT(17)
+#define SPIFMT_DISTIMER_MASK BIT(18)
+#define SPIFMT_SHIFTDIR_MASK BIT(20)
+#define SPIFMT_WAITENA_MASK BIT(21)
+#define SPIFMT_PARITYENA_MASK BIT(22)
+#define SPIFMT_ODD_PARITY_MASK BIT(23)
+#define SPIFMT_WDELAY_MASK 0x3f000000u
+#define SPIFMT_WDELAY_SHIFT 24
+#define SPIFMT_PRESCALE_SHIFT 8
+
+/* SPIPC0 */
+#define SPIPC0_DIFUN_MASK BIT(11) /* MISO */
+#define SPIPC0_DOFUN_MASK BIT(10) /* MOSI */
+#define SPIPC0_CLKFUN_MASK BIT(9) /* CLK */
+#define SPIPC0_SPIENA_MASK BIT(8) /* nREADY */
+
+#define SPIINT_MASKALL 0x0101035F
+#define SPIINT_MASKINT 0x0000015F
+#define SPI_INTLVL_1 0x000001FF
+#define SPI_INTLVL_0 0x00000000
+
+/* SPIDAT1 (upper 16 bit defines) */
+#define SPIDAT1_CSHOLD_MASK BIT(12)
+#define SPIDAT1_WDEL BIT(10)
+
+/* SPIGCR1 */
+#define SPIGCR1_CLKMOD_MASK BIT(1)
+#define SPIGCR1_MASTER_MASK BIT(0)
+#define SPIGCR1_POWERDOWN_MASK BIT(8)
+#define SPIGCR1_LOOPBACK_MASK BIT(16)
+#define SPIGCR1_SPIENA_MASK BIT(24)
+
+/* SPIBUF */
+#define SPIBUF_TXFULL_MASK BIT(29)
+#define SPIBUF_RXEMPTY_MASK BIT(31)
+
+/* SPIDELAY */
+#define SPIDELAY_C2TDELAY_SHIFT 24
+#define SPIDELAY_C2TDELAY_MASK (0xFF << SPIDELAY_C2TDELAY_SHIFT)
+#define SPIDELAY_T2CDELAY_SHIFT 16
+#define SPIDELAY_T2CDELAY_MASK (0xFF << SPIDELAY_T2CDELAY_SHIFT)
+#define SPIDELAY_T2EDELAY_SHIFT 8
+#define SPIDELAY_T2EDELAY_MASK (0xFF << SPIDELAY_T2EDELAY_SHIFT)
+#define SPIDELAY_C2EDELAY_SHIFT 0
+#define SPIDELAY_C2EDELAY_MASK 0xFF
+
+/* Error Masks */
+#define SPIFLG_DLEN_ERR_MASK BIT(0)
+#define SPIFLG_TIMEOUT_MASK BIT(1)
+#define SPIFLG_PARERR_MASK BIT(2)
+#define SPIFLG_DESYNC_MASK BIT(3)
+#define SPIFLG_BITERR_MASK BIT(4)
+#define SPIFLG_OVRRUN_MASK BIT(6)
+#define SPIFLG_BUF_INIT_ACTIVE_MASK BIT(24)
+#define SPIFLG_ERROR_MASK (SPIFLG_DLEN_ERR_MASK \
+ | SPIFLG_TIMEOUT_MASK | SPIFLG_PARERR_MASK \
+ | SPIFLG_DESYNC_MASK | SPIFLG_BITERR_MASK \
+ | SPIFLG_OVRRUN_MASK)
+
+#define SPIINT_DMA_REQ_EN BIT(16)
+
+/* SPI Controller registers */
+#define SPIGCR0 0x00
+#define SPIGCR1 0x04
+#define SPIINT 0x08
+#define SPILVL 0x0c
+#define SPIFLG 0x10
+#define SPIPC0 0x14
+#define SPIDAT1 0x3c
+#define SPIBUF 0x40
+#define SPIDELAY 0x48
+#define SPIDEF 0x4c
+#define SPIFMT0 0x50
+
+#define DMA_MIN_BYTES 16
+
+/* SPI Controller driver's private data. */
+struct davinci_spi {
+ struct spi_bitbang bitbang;
+ struct clk *clk;
+
+ u8 version;
+ resource_size_t pbase;
+ void __iomem *base;
+ u32 irq;
+ struct completion done;
+
+ const void *tx;
+ void *rx;
+ int rcount;
+ int wcount;
+
+ struct dma_chan *dma_rx;
+ struct dma_chan *dma_tx;
+
+ struct davinci_spi_platform_data pdata;
+
+ void (*get_rx)(u32 rx_data, struct davinci_spi *);
+ u32 (*get_tx)(struct davinci_spi *);
+
+ u8 *bytes_per_word;
+
+ u8 prescaler_limit;
+};
+
+static struct davinci_spi_config davinci_spi_default_cfg;
+
+static void davinci_spi_rx_buf_u8(u32 data, struct davinci_spi *dspi)
+{
+ if (dspi->rx) {
+ u8 *rx = dspi->rx;
+ *rx++ = (u8)data;
+ dspi->rx = rx;
+ }
+}
+
+static void davinci_spi_rx_buf_u16(u32 data, struct davinci_spi *dspi)
+{
+ if (dspi->rx) {
+ u16 *rx = dspi->rx;
+ *rx++ = (u16)data;
+ dspi->rx = rx;
+ }
+}
+
+static u32 davinci_spi_tx_buf_u8(struct davinci_spi *dspi)
+{
+ u32 data = 0;
+
+ if (dspi->tx) {
+ const u8 *tx = dspi->tx;
+
+ data = *tx++;
+ dspi->tx = tx;
+ }
+ return data;
+}
+
+static u32 davinci_spi_tx_buf_u16(struct davinci_spi *dspi)
+{
+ u32 data = 0;
+
+ if (dspi->tx) {
+ const u16 *tx = dspi->tx;
+
+ data = *tx++;
+ dspi->tx = tx;
+ }
+ return data;
+}
+
+static inline void set_io_bits(void __iomem *addr, u32 bits)
+{
+ u32 v = ioread32(addr);
+
+ v |= bits;
+ iowrite32(v, addr);
+}
+
+static inline void clear_io_bits(void __iomem *addr, u32 bits)
+{
+ u32 v = ioread32(addr);
+
+ v &= ~bits;
+ iowrite32(v, addr);
+}
+
+/*
+ * Interface to control the chip select signal
+ */
+static void davinci_spi_chipselect(struct spi_device *spi, int value)
+{
+ struct davinci_spi *dspi;
+ struct davinci_spi_config *spicfg = spi->controller_data;
+ u8 chip_sel = spi_get_chipselect(spi, 0);
+ u16 spidat1 = CS_DEFAULT;
+
+ dspi = spi_controller_get_devdata(spi->controller);
+
+ /* program delay transfers if tx_delay is non zero */
+ if (spicfg && spicfg->wdelay)
+ spidat1 |= SPIDAT1_WDEL;
+
+ /*
+ * Board specific chip select logic decides the polarity and cs
+ * line for the controller
+ */
+ if (spi_get_csgpiod(spi, 0)) {
+ if (value == BITBANG_CS_ACTIVE)
+ gpiod_set_value(spi_get_csgpiod(spi, 0), 1);
+ else
+ gpiod_set_value(spi_get_csgpiod(spi, 0), 0);
+ } else {
+ if (value == BITBANG_CS_ACTIVE) {
+ if (!(spi->mode & SPI_CS_WORD))
+ spidat1 |= SPIDAT1_CSHOLD_MASK;
+ spidat1 &= ~(0x1 << chip_sel);
+ }
+ }
+
+ iowrite16(spidat1, dspi->base + SPIDAT1 + 2);
+}
+
+/**
+ * davinci_spi_get_prescale - Calculates the correct prescale value
+ * @dspi: the controller data
+ * @max_speed_hz: the maximum rate the SPI clock can run at
+ *
+ * This function calculates the prescale value that generates a clock rate
+ * less than or equal to the specified maximum.
+ *
+ * Returns: calculated prescale value for easy programming into SPI registers
+ * or negative error number if valid prescalar cannot be updated.
+ */
+static inline int davinci_spi_get_prescale(struct davinci_spi *dspi,
+ u32 max_speed_hz)
+{
+ int ret;
+
+ /* Subtract 1 to match what will be programmed into SPI register. */
+ ret = DIV_ROUND_UP(clk_get_rate(dspi->clk), max_speed_hz) - 1;
+
+ if (ret < dspi->prescaler_limit || ret > 255)
+ return -EINVAL;
+
+ return ret;
+}
+
+/**
+ * davinci_spi_setup_transfer - This functions will determine transfer method
+ * @spi: spi device on which data transfer to be done
+ * @t: spi transfer in which transfer info is filled
+ *
+ * This function determines data transfer method (8/16/32 bit transfer).
+ * It will also set the SPI Clock Control register according to
+ * SPI slave device freq.
+ */
+static int davinci_spi_setup_transfer(struct spi_device *spi,
+ struct spi_transfer *t)
+{
+
+ struct davinci_spi *dspi;
+ struct davinci_spi_config *spicfg;
+ u8 bits_per_word = 0;
+ u32 hz = 0, spifmt = 0;
+ int prescale;
+
+ dspi = spi_controller_get_devdata(spi->controller);
+ spicfg = spi->controller_data;
+ if (!spicfg)
+ spicfg = &davinci_spi_default_cfg;
+
+ if (t) {
+ bits_per_word = t->bits_per_word;
+ hz = t->speed_hz;
+ }
+
+ /* if bits_per_word is not set then set it default */
+ if (!bits_per_word)
+ bits_per_word = spi->bits_per_word;
+
+ /*
+ * Assign function pointer to appropriate transfer method
+ * 8bit, 16bit or 32bit transfer
+ */
+ if (bits_per_word <= 8) {
+ dspi->get_rx = davinci_spi_rx_buf_u8;
+ dspi->get_tx = davinci_spi_tx_buf_u8;
+ dspi->bytes_per_word[spi_get_chipselect(spi, 0)] = 1;
+ } else {
+ dspi->get_rx = davinci_spi_rx_buf_u16;
+ dspi->get_tx = davinci_spi_tx_buf_u16;
+ dspi->bytes_per_word[spi_get_chipselect(spi, 0)] = 2;
+ }
+
+ if (!hz)
+ hz = spi->max_speed_hz;
+
+ /* Set up SPIFMTn register, unique to this chipselect. */
+
+ prescale = davinci_spi_get_prescale(dspi, hz);
+ if (prescale < 0)
+ return prescale;
+
+ spifmt = (prescale << SPIFMT_PRESCALE_SHIFT) | (bits_per_word & 0x1f);
+
+ if (spi->mode & SPI_LSB_FIRST)
+ spifmt |= SPIFMT_SHIFTDIR_MASK;
+
+ if (spi->mode & SPI_CPOL)
+ spifmt |= SPIFMT_POLARITY_MASK;
+
+ if (!(spi->mode & SPI_CPHA))
+ spifmt |= SPIFMT_PHASE_MASK;
+
+ /*
+ * Assume wdelay is used only on SPI peripherals that has this field
+ * in SPIFMTn register and when it's configured from board file or DT.
+ */
+ if (spicfg->wdelay)
+ spifmt |= ((spicfg->wdelay << SPIFMT_WDELAY_SHIFT)
+ & SPIFMT_WDELAY_MASK);
+
+ /*
+ * Version 1 hardware supports two basic SPI modes:
+ * - Standard SPI mode uses 4 pins, with chipselect
+ * - 3 pin SPI is a 4 pin variant without CS (SPI_NO_CS)
+ * (distinct from SPI_3WIRE, with just one data wire;
+ * or similar variants without MOSI or without MISO)
+ *
+ * Version 2 hardware supports an optional handshaking signal,
+ * so it can support two more modes:
+ * - 5 pin SPI variant is standard SPI plus SPI_READY
+ * - 4 pin with enable is (SPI_READY | SPI_NO_CS)
+ */
+
+ if (dspi->version == SPI_VERSION_2) {
+
+ u32 delay = 0;
+
+ if (spicfg->odd_parity)
+ spifmt |= SPIFMT_ODD_PARITY_MASK;
+
+ if (spicfg->parity_enable)
+ spifmt |= SPIFMT_PARITYENA_MASK;
+
+ if (spicfg->timer_disable) {
+ spifmt |= SPIFMT_DISTIMER_MASK;
+ } else {
+ delay |= (spicfg->c2tdelay << SPIDELAY_C2TDELAY_SHIFT)
+ & SPIDELAY_C2TDELAY_MASK;
+ delay |= (spicfg->t2cdelay << SPIDELAY_T2CDELAY_SHIFT)
+ & SPIDELAY_T2CDELAY_MASK;
+ }
+
+ if (spi->mode & SPI_READY) {
+ spifmt |= SPIFMT_WAITENA_MASK;
+ delay |= (spicfg->t2edelay << SPIDELAY_T2EDELAY_SHIFT)
+ & SPIDELAY_T2EDELAY_MASK;
+ delay |= (spicfg->c2edelay << SPIDELAY_C2EDELAY_SHIFT)
+ & SPIDELAY_C2EDELAY_MASK;
+ }
+
+ iowrite32(delay, dspi->base + SPIDELAY);
+ }
+
+ iowrite32(spifmt, dspi->base + SPIFMT0);
+
+ return 0;
+}
+
+static int davinci_spi_of_setup(struct spi_device *spi)
+{
+ struct davinci_spi_config *spicfg = spi->controller_data;
+ struct device_node *np = spi->dev.of_node;
+ struct davinci_spi *dspi = spi_controller_get_devdata(spi->controller);
+ u32 prop;
+
+ if (spicfg == NULL && np) {
+ spicfg = kzalloc(sizeof(*spicfg), GFP_KERNEL);
+ if (!spicfg)
+ return -ENOMEM;
+ *spicfg = davinci_spi_default_cfg;
+ /* override with dt configured values */
+ if (!of_property_read_u32(np, "ti,spi-wdelay", &prop))
+ spicfg->wdelay = (u8)prop;
+ spi->controller_data = spicfg;
+
+ if (dspi->dma_rx && dspi->dma_tx)
+ spicfg->io_type = SPI_IO_TYPE_DMA;
+ }
+
+ return 0;
+}
+
+/**
+ * davinci_spi_setup - This functions will set default transfer method
+ * @spi: spi device on which data transfer to be done
+ *
+ * This functions sets the default transfer method.
+ */
+static int davinci_spi_setup(struct spi_device *spi)
+{
+ struct davinci_spi *dspi;
+ struct device_node *np = spi->dev.of_node;
+ bool internal_cs = true;
+
+ dspi = spi_controller_get_devdata(spi->controller);
+
+ if (!(spi->mode & SPI_NO_CS)) {
+ if (np && spi_get_csgpiod(spi, 0))
+ internal_cs = false;
+
+ if (internal_cs)
+ set_io_bits(dspi->base + SPIPC0, 1 << spi_get_chipselect(spi, 0));
+ }
+
+ if (spi->mode & SPI_READY)
+ set_io_bits(dspi->base + SPIPC0, SPIPC0_SPIENA_MASK);
+
+ if (spi->mode & SPI_LOOP)
+ set_io_bits(dspi->base + SPIGCR1, SPIGCR1_LOOPBACK_MASK);
+ else
+ clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_LOOPBACK_MASK);
+
+ return davinci_spi_of_setup(spi);
+}
+
+static void davinci_spi_cleanup(struct spi_device *spi)
+{
+ struct davinci_spi_config *spicfg = spi->controller_data;
+
+ spi->controller_data = NULL;
+ if (spi->dev.of_node)
+ kfree(spicfg);
+}
+
+static bool davinci_spi_can_dma(struct spi_controller *host,
+ struct spi_device *spi,
+ struct spi_transfer *xfer)
+{
+ struct davinci_spi_config *spicfg = spi->controller_data;
+ bool can_dma = false;
+
+ if (spicfg)
+ can_dma = (spicfg->io_type == SPI_IO_TYPE_DMA) &&
+ (xfer->len >= DMA_MIN_BYTES) &&
+ !is_vmalloc_addr(xfer->rx_buf) &&
+ !is_vmalloc_addr(xfer->tx_buf);
+
+ return can_dma;
+}
+
+static int davinci_spi_check_error(struct davinci_spi *dspi, int int_status)
+{
+ struct device *sdev = dspi->bitbang.master->dev.parent;
+
+ if (int_status & SPIFLG_TIMEOUT_MASK) {
+ dev_err(sdev, "SPI Time-out Error\n");
+ return -ETIMEDOUT;
+ }
+ if (int_status & SPIFLG_DESYNC_MASK) {
+ dev_err(sdev, "SPI Desynchronization Error\n");
+ return -EIO;
+ }
+ if (int_status & SPIFLG_BITERR_MASK) {
+ dev_err(sdev, "SPI Bit error\n");
+ return -EIO;
+ }
+
+ if (dspi->version == SPI_VERSION_2) {
+ if (int_status & SPIFLG_DLEN_ERR_MASK) {
+ dev_err(sdev, "SPI Data Length Error\n");
+ return -EIO;
+ }
+ if (int_status & SPIFLG_PARERR_MASK) {
+ dev_err(sdev, "SPI Parity Error\n");
+ return -EIO;
+ }
+ if (int_status & SPIFLG_OVRRUN_MASK) {
+ dev_err(sdev, "SPI Data Overrun error\n");
+ return -EIO;
+ }
+ if (int_status & SPIFLG_BUF_INIT_ACTIVE_MASK) {
+ dev_err(sdev, "SPI Buffer Init Active\n");
+ return -EBUSY;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * davinci_spi_process_events - check for and handle any SPI controller events
+ * @dspi: the controller data
+ *
+ * This function will check the SPIFLG register and handle any events that are
+ * detected there
+ */
+static int davinci_spi_process_events(struct davinci_spi *dspi)
+{
+ u32 buf, status, errors = 0, spidat1;
+
+ buf = ioread32(dspi->base + SPIBUF);
+
+ if (dspi->rcount > 0 && !(buf & SPIBUF_RXEMPTY_MASK)) {
+ dspi->get_rx(buf & 0xFFFF, dspi);
+ dspi->rcount--;
+ }
+
+ status = ioread32(dspi->base + SPIFLG);
+
+ if (unlikely(status & SPIFLG_ERROR_MASK)) {
+ errors = status & SPIFLG_ERROR_MASK;
+ goto out;
+ }
+
+ if (dspi->wcount > 0 && !(buf & SPIBUF_TXFULL_MASK)) {
+ spidat1 = ioread32(dspi->base + SPIDAT1);
+ dspi->wcount--;
+ spidat1 &= ~0xFFFF;
+ spidat1 |= 0xFFFF & dspi->get_tx(dspi);
+ iowrite32(spidat1, dspi->base + SPIDAT1);
+ }
+
+out:
+ return errors;
+}
+
+static void davinci_spi_dma_rx_callback(void *data)
+{
+ struct davinci_spi *dspi = (struct davinci_spi *)data;
+
+ dspi->rcount = 0;
+
+ if (!dspi->wcount && !dspi->rcount)
+ complete(&dspi->done);
+}
+
+static void davinci_spi_dma_tx_callback(void *data)
+{
+ struct davinci_spi *dspi = (struct davinci_spi *)data;
+
+ dspi->wcount = 0;
+
+ if (!dspi->wcount && !dspi->rcount)
+ complete(&dspi->done);
+}
+
+/**
+ * davinci_spi_bufs - functions which will handle transfer data
+ * @spi: spi device on which data transfer to be done
+ * @t: spi transfer in which transfer info is filled
+ *
+ * This function will put data to be transferred into data register
+ * of SPI controller and then wait until the completion will be marked
+ * by the IRQ Handler.
+ */
+static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
+{
+ struct davinci_spi *dspi;
+ int data_type, ret = -ENOMEM;
+ u32 tx_data, spidat1;
+ u32 errors = 0;
+ struct davinci_spi_config *spicfg;
+ struct davinci_spi_platform_data *pdata;
+
+ dspi = spi_controller_get_devdata(spi->controller);
+ pdata = &dspi->pdata;
+ spicfg = (struct davinci_spi_config *)spi->controller_data;
+ if (!spicfg)
+ spicfg = &davinci_spi_default_cfg;
+
+ /* convert len to words based on bits_per_word */
+ data_type = dspi->bytes_per_word[spi_get_chipselect(spi, 0)];
+
+ dspi->tx = t->tx_buf;
+ dspi->rx = t->rx_buf;
+ dspi->wcount = t->len / data_type;
+ dspi->rcount = dspi->wcount;
+
+ spidat1 = ioread32(dspi->base + SPIDAT1);
+
+ clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK);
+ set_io_bits(dspi->base + SPIGCR1, SPIGCR1_SPIENA_MASK);
+
+ reinit_completion(&dspi->done);
+
+ if (!davinci_spi_can_dma(spi->controller, spi, t)) {
+ if (spicfg->io_type != SPI_IO_TYPE_POLL)
+ set_io_bits(dspi->base + SPIINT, SPIINT_MASKINT);
+ /* start the transfer */
+ dspi->wcount--;
+ tx_data = dspi->get_tx(dspi);
+ spidat1 &= 0xFFFF0000;
+ spidat1 |= tx_data & 0xFFFF;
+ iowrite32(spidat1, dspi->base + SPIDAT1);
+ } else {
+ struct dma_slave_config dma_rx_conf = {
+ .direction = DMA_DEV_TO_MEM,
+ .src_addr = (unsigned long)dspi->pbase + SPIBUF,
+ .src_addr_width = data_type,
+ .src_maxburst = 1,
+ };
+ struct dma_slave_config dma_tx_conf = {
+ .direction = DMA_MEM_TO_DEV,
+ .dst_addr = (unsigned long)dspi->pbase + SPIDAT1,
+ .dst_addr_width = data_type,
+ .dst_maxburst = 1,
+ };
+ struct dma_async_tx_descriptor *rxdesc;
+ struct dma_async_tx_descriptor *txdesc;
+
+ dmaengine_slave_config(dspi->dma_rx, &dma_rx_conf);
+ dmaengine_slave_config(dspi->dma_tx, &dma_tx_conf);
+
+ rxdesc = dmaengine_prep_slave_sg(dspi->dma_rx,
+ t->rx_sg.sgl, t->rx_sg.nents, DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!rxdesc)
+ goto err_desc;
+
+ if (!t->tx_buf) {
+ /* To avoid errors when doing rx-only transfers with
+ * many SG entries (> 20), use the rx buffer as the
+ * dummy tx buffer so that dma reloads are done at the
+ * same time for rx and tx.
+ */
+ t->tx_sg.sgl = t->rx_sg.sgl;
+ t->tx_sg.nents = t->rx_sg.nents;
+ }
+
+ txdesc = dmaengine_prep_slave_sg(dspi->dma_tx,
+ t->tx_sg.sgl, t->tx_sg.nents, DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!txdesc)
+ goto err_desc;
+
+ rxdesc->callback = davinci_spi_dma_rx_callback;
+ rxdesc->callback_param = (void *)dspi;
+ txdesc->callback = davinci_spi_dma_tx_callback;
+ txdesc->callback_param = (void *)dspi;
+
+ if (pdata->cshold_bug)
+ iowrite16(spidat1 >> 16, dspi->base + SPIDAT1 + 2);
+
+ dmaengine_submit(rxdesc);
+ dmaengine_submit(txdesc);
+
+ dma_async_issue_pending(dspi->dma_rx);
+ dma_async_issue_pending(dspi->dma_tx);
+
+ set_io_bits(dspi->base + SPIINT, SPIINT_DMA_REQ_EN);
+ }
+
+ /* Wait for the transfer to complete */
+ if (spicfg->io_type != SPI_IO_TYPE_POLL) {
+ if (wait_for_completion_timeout(&dspi->done, HZ) == 0)
+ errors = SPIFLG_TIMEOUT_MASK;
+ } else {
+ while (dspi->rcount > 0 || dspi->wcount > 0) {
+ errors = davinci_spi_process_events(dspi);
+ if (errors)
+ break;
+ cpu_relax();
+ }
+ }
+
+ clear_io_bits(dspi->base + SPIINT, SPIINT_MASKALL);
+ if (davinci_spi_can_dma(spi->controller, spi, t))
+ clear_io_bits(dspi->base + SPIINT, SPIINT_DMA_REQ_EN);
+
+ clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_SPIENA_MASK);
+ set_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK);
+
+ /*
+ * Check for bit error, desync error,parity error,timeout error and
+ * receive overflow errors
+ */
+ if (errors) {
+ ret = davinci_spi_check_error(dspi, errors);
+ WARN(!ret, "%s: error reported but no error found!\n",
+ dev_name(&spi->dev));
+ return ret;
+ }
+
+ if (dspi->rcount != 0 || dspi->wcount != 0) {
+ dev_err(&spi->dev, "SPI data transfer error\n");
+ return -EIO;
+ }
+
+ return t->len;
+
+err_desc:
+ return ret;
+}
+
+/**
+ * dummy_thread_fn - dummy thread function
+ * @irq: IRQ number for this SPI Master
+ * @data: structure for SPI Master controller davinci_spi
+ *
+ * This is to satisfy the request_threaded_irq() API so that the irq
+ * handler is called in interrupt context.
+ */
+static irqreturn_t dummy_thread_fn(s32 irq, void *data)
+{
+ return IRQ_HANDLED;
+}
+
+/**
+ * davinci_spi_irq - Interrupt handler for SPI Master Controller
+ * @irq: IRQ number for this SPI Master
+ * @data: structure for SPI Master controller davinci_spi
+ *
+ * ISR will determine that interrupt arrives either for READ or WRITE command.
+ * According to command it will do the appropriate action. It will check
+ * transfer length and if it is not zero then dispatch transfer command again.
+ * If transfer length is zero then it will indicate the COMPLETION so that
+ * davinci_spi_bufs function can go ahead.
+ */
+static irqreturn_t davinci_spi_irq(s32 irq, void *data)
+{
+ struct davinci_spi *dspi = data;
+ int status;
+
+ status = davinci_spi_process_events(dspi);
+ if (unlikely(status != 0))
+ clear_io_bits(dspi->base + SPIINT, SPIINT_MASKINT);
+
+ if ((!dspi->rcount && !dspi->wcount) || status)
+ complete(&dspi->done);
+
+ return IRQ_HANDLED;
+}
+
+static int davinci_spi_request_dma(struct davinci_spi *dspi)
+{
+ struct device *sdev = dspi->bitbang.master->dev.parent;
+
+ dspi->dma_rx = dma_request_chan(sdev, "rx");
+ if (IS_ERR(dspi->dma_rx))
+ return PTR_ERR(dspi->dma_rx);
+
+ dspi->dma_tx = dma_request_chan(sdev, "tx");
+ if (IS_ERR(dspi->dma_tx)) {
+ dma_release_channel(dspi->dma_rx);
+ return PTR_ERR(dspi->dma_tx);
+ }
+
+ return 0;
+}
+
+#if defined(CONFIG_OF)
+
+/* OF SPI data structure */
+struct davinci_spi_of_data {
+ u8 version;
+ u8 prescaler_limit;
+};
+
+static const struct davinci_spi_of_data dm6441_spi_data = {
+ .version = SPI_VERSION_1,
+ .prescaler_limit = 2,
+};
+
+static const struct davinci_spi_of_data da830_spi_data = {
+ .version = SPI_VERSION_2,
+ .prescaler_limit = 2,
+};
+
+static const struct davinci_spi_of_data keystone_spi_data = {
+ .version = SPI_VERSION_1,
+ .prescaler_limit = 0,
+};
+
+static const struct of_device_id davinci_spi_of_match[] = {
+ {
+ .compatible = "ti,dm6441-spi",
+ .data = &dm6441_spi_data,
+ },
+ {
+ .compatible = "ti,da830-spi",
+ .data = &da830_spi_data,
+ },
+ {
+ .compatible = "ti,keystone-spi",
+ .data = &keystone_spi_data,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, davinci_spi_of_match);
+
+/**
+ * spi_davinci_get_pdata - Get platform data from DTS binding
+ * @pdev: ptr to platform data
+ * @dspi: ptr to driver data
+ *
+ * Parses and populates pdata in dspi from device tree bindings.
+ *
+ * NOTE: Not all platform data params are supported currently.
+ */
+static int spi_davinci_get_pdata(struct platform_device *pdev,
+ struct davinci_spi *dspi)
+{
+ struct device_node *node = pdev->dev.of_node;
+ const struct davinci_spi_of_data *spi_data;
+ struct davinci_spi_platform_data *pdata;
+ unsigned int num_cs, intr_line = 0;
+
+ pdata = &dspi->pdata;
+
+ spi_data = device_get_match_data(&pdev->dev);
+
+ pdata->version = spi_data->version;
+ pdata->prescaler_limit = spi_data->prescaler_limit;
+ /*
+ * default num_cs is 1 and all chipsel are internal to the chip
+ * indicated by chip_sel being NULL or cs_gpios being NULL or
+ * set to -ENOENT. num-cs includes internal as well as gpios.
+ * indicated by chip_sel being NULL. GPIO based CS is not
+ * supported yet in DT bindings.
+ */
+ num_cs = 1;
+ of_property_read_u32(node, "num-cs", &num_cs);
+ pdata->num_chipselect = num_cs;
+ of_property_read_u32(node, "ti,davinci-spi-intr-line", &intr_line);
+ pdata->intr_line = intr_line;
+ return 0;
+}
+#else
+static int spi_davinci_get_pdata(struct platform_device *pdev,
+ struct davinci_spi *dspi)
+{
+ return -ENODEV;
+}
+#endif
+
+/**
+ * davinci_spi_probe - probe function for SPI Master Controller
+ * @pdev: platform_device structure which contains plateform specific data
+ *
+ * According to Linux Device Model this function will be invoked by Linux
+ * with platform_device struct which contains the device specific info.
+ * This function will map the SPI controller's memory, register IRQ,
+ * Reset SPI controller and setting its registers to default value.
+ * It will invoke spi_bitbang_start to create work queue so that client driver
+ * can register transfer method to work queue.
+ */
+static int davinci_spi_probe(struct platform_device *pdev)
+{
+ struct spi_controller *host;
+ struct davinci_spi *dspi;
+ struct davinci_spi_platform_data *pdata;
+ struct resource *r;
+ int ret = 0;
+ u32 spipc0;
+
+ host = spi_alloc_host(&pdev->dev, sizeof(struct davinci_spi));
+ if (host == NULL) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ platform_set_drvdata(pdev, host);
+
+ dspi = spi_controller_get_devdata(host);
+
+ if (dev_get_platdata(&pdev->dev)) {
+ pdata = dev_get_platdata(&pdev->dev);
+ dspi->pdata = *pdata;
+ } else {
+ /* update dspi pdata with that from the DT */
+ ret = spi_davinci_get_pdata(pdev, dspi);
+ if (ret < 0)
+ goto free_host;
+ }
+
+ /* pdata in dspi is now updated and point pdata to that */
+ pdata = &dspi->pdata;
+
+ dspi->bytes_per_word = devm_kcalloc(&pdev->dev,
+ pdata->num_chipselect,
+ sizeof(*dspi->bytes_per_word),
+ GFP_KERNEL);
+ if (dspi->bytes_per_word == NULL) {
+ ret = -ENOMEM;
+ goto free_host;
+ }
+
+ dspi->base = devm_platform_get_and_ioremap_resource(pdev, 0, &r);
+ if (IS_ERR(dspi->base)) {
+ ret = PTR_ERR(dspi->base);
+ goto free_host;
+ }
+ dspi->pbase = r->start;
+
+ init_completion(&dspi->done);
+
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ goto free_host;
+ dspi->irq = ret;
+
+ ret = devm_request_threaded_irq(&pdev->dev, dspi->irq, davinci_spi_irq,
+ dummy_thread_fn, 0, dev_name(&pdev->dev), dspi);
+ if (ret)
+ goto free_host;
+
+ dspi->bitbang.master = host;
+
+ dspi->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(dspi->clk)) {
+ ret = -ENODEV;
+ goto free_host;
+ }
+ ret = clk_prepare_enable(dspi->clk);
+ if (ret)
+ goto free_host;
+
+ host->use_gpio_descriptors = true;
+ host->dev.of_node = pdev->dev.of_node;
+ host->bus_num = pdev->id;
+ host->num_chipselect = pdata->num_chipselect;
+ host->bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 16);
+ host->flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_GPIO_SS;
+ host->setup = davinci_spi_setup;
+ host->cleanup = davinci_spi_cleanup;
+ host->can_dma = davinci_spi_can_dma;
+
+ dspi->bitbang.chipselect = davinci_spi_chipselect;
+ dspi->bitbang.setup_transfer = davinci_spi_setup_transfer;
+ dspi->prescaler_limit = pdata->prescaler_limit;
+ dspi->version = pdata->version;
+
+ dspi->bitbang.flags = SPI_NO_CS | SPI_LSB_FIRST | SPI_LOOP | SPI_CS_WORD;
+ if (dspi->version == SPI_VERSION_2)
+ dspi->bitbang.flags |= SPI_READY;
+
+ dspi->bitbang.txrx_bufs = davinci_spi_bufs;
+
+ ret = davinci_spi_request_dma(dspi);
+ if (ret == -EPROBE_DEFER) {
+ goto free_clk;
+ } else if (ret) {
+ dev_info(&pdev->dev, "DMA is not supported (%d)\n", ret);
+ dspi->dma_rx = NULL;
+ dspi->dma_tx = NULL;
+ }
+
+ dspi->get_rx = davinci_spi_rx_buf_u8;
+ dspi->get_tx = davinci_spi_tx_buf_u8;
+
+ /* Reset In/OUT SPI module */
+ iowrite32(0, dspi->base + SPIGCR0);
+ udelay(100);
+ iowrite32(1, dspi->base + SPIGCR0);
+
+ /* Set up SPIPC0. CS and ENA init is done in davinci_spi_setup */
+ spipc0 = SPIPC0_DIFUN_MASK | SPIPC0_DOFUN_MASK | SPIPC0_CLKFUN_MASK;
+ iowrite32(spipc0, dspi->base + SPIPC0);
+
+ if (pdata->intr_line)
+ iowrite32(SPI_INTLVL_1, dspi->base + SPILVL);
+ else
+ iowrite32(SPI_INTLVL_0, dspi->base + SPILVL);
+
+ iowrite32(CS_DEFAULT, dspi->base + SPIDEF);
+
+ /* host mode default */
+ set_io_bits(dspi->base + SPIGCR1, SPIGCR1_CLKMOD_MASK);
+ set_io_bits(dspi->base + SPIGCR1, SPIGCR1_MASTER_MASK);
+ set_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK);
+
+ ret = spi_bitbang_start(&dspi->bitbang);
+ if (ret)
+ goto free_dma;
+
+ dev_info(&pdev->dev, "Controller at 0x%p\n", dspi->base);
+
+ return ret;
+
+free_dma:
+ if (dspi->dma_rx) {
+ dma_release_channel(dspi->dma_rx);
+ dma_release_channel(dspi->dma_tx);
+ }
+free_clk:
+ clk_disable_unprepare(dspi->clk);
+free_host:
+ spi_controller_put(host);
+err:
+ return ret;
+}
+
+/**
+ * davinci_spi_remove - remove function for SPI Master Controller
+ * @pdev: platform_device structure which contains plateform specific data
+ *
+ * This function will do the reverse action of davinci_spi_probe function
+ * It will free the IRQ and SPI controller's memory region.
+ * It will also call spi_bitbang_stop to destroy the work queue which was
+ * created by spi_bitbang_start.
+ */
+static void davinci_spi_remove(struct platform_device *pdev)
+{
+ struct davinci_spi *dspi;
+ struct spi_controller *host;
+
+ host = platform_get_drvdata(pdev);
+ dspi = spi_controller_get_devdata(host);
+
+ spi_bitbang_stop(&dspi->bitbang);
+
+ clk_disable_unprepare(dspi->clk);
+
+ if (dspi->dma_rx) {
+ dma_release_channel(dspi->dma_rx);
+ dma_release_channel(dspi->dma_tx);
+ }
+
+ spi_controller_put(host);
+}
+
+static struct platform_driver davinci_spi_driver = {
+ .driver = {
+ .name = "spi_davinci",
+ .of_match_table = of_match_ptr(davinci_spi_of_match),
+ },
+ .probe = davinci_spi_probe,
+ .remove_new = davinci_spi_remove,
+};
+module_platform_driver(davinci_spi_driver);
+
+MODULE_DESCRIPTION("TI DaVinci SPI Master Controller Driver");
+MODULE_LICENSE("GPL");