diff options
Diffstat (limited to 'drivers/spi/spi-pxa2xx.c')
| -rw-r--r-- | drivers/spi/spi-pxa2xx.c | 1786 |
1 files changed, 1786 insertions, 0 deletions
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c new file mode 100644 index 0000000000..f2a856f6a9 --- /dev/null +++ b/drivers/spi/spi-pxa2xx.c @@ -0,0 +1,1786 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs + * Copyright (C) 2013, 2021 Intel Corporation + */ + +#include <linux/acpi.h> +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/dmaengine.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/gpio/consumer.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/property.h> +#include <linux/slab.h> + +#include <linux/spi/pxa2xx_spi.h> +#include <linux/spi/spi.h> + +#include "spi-pxa2xx.h" + +MODULE_AUTHOR("Stephen Street"); +MODULE_DESCRIPTION("PXA2xx SSP SPI Controller"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pxa2xx-spi"); + +#define TIMOUT_DFLT 1000 + +/* + * For testing SSCR1 changes that require SSP restart, basically + * everything except the service and interrupt enables, the PXA270 developer + * manual says only SSCR1_SCFR, SSCR1_SPH, SSCR1_SPO need to be in this + * list, but the PXA255 developer manual says all bits without really meaning + * the service and interrupt enables. + */ +#define SSCR1_CHANGE_MASK (SSCR1_TTELP | SSCR1_TTE | SSCR1_SCFR \ + | SSCR1_ECRA | SSCR1_ECRB | SSCR1_SCLKDIR \ + | SSCR1_SFRMDIR | SSCR1_RWOT | SSCR1_TRAIL \ + | SSCR1_IFS | SSCR1_STRF | SSCR1_EFWR \ + | SSCR1_RFT | SSCR1_TFT | SSCR1_MWDS \ + | SSCR1_SPH | SSCR1_SPO | SSCR1_LBM) + +#define QUARK_X1000_SSCR1_CHANGE_MASK (QUARK_X1000_SSCR1_STRF \ + | QUARK_X1000_SSCR1_EFWR \ + | QUARK_X1000_SSCR1_RFT \ + | QUARK_X1000_SSCR1_TFT \ + | SSCR1_SPH | SSCR1_SPO | SSCR1_LBM) + +#define CE4100_SSCR1_CHANGE_MASK (SSCR1_TTELP | SSCR1_TTE | SSCR1_SCFR \ + | SSCR1_ECRA | SSCR1_ECRB | SSCR1_SCLKDIR \ + | SSCR1_SFRMDIR | SSCR1_RWOT | SSCR1_TRAIL \ + | SSCR1_IFS | SSCR1_STRF | SSCR1_EFWR \ + | CE4100_SSCR1_RFT | CE4100_SSCR1_TFT | SSCR1_MWDS \ + | SSCR1_SPH | SSCR1_SPO | SSCR1_LBM) + +#define LPSS_GENERAL_REG_RXTO_HOLDOFF_DISABLE BIT(24) +#define LPSS_CS_CONTROL_SW_MODE BIT(0) +#define LPSS_CS_CONTROL_CS_HIGH BIT(1) +#define LPSS_CAPS_CS_EN_SHIFT 9 +#define LPSS_CAPS_CS_EN_MASK (0xf << LPSS_CAPS_CS_EN_SHIFT) + +#define LPSS_PRIV_CLOCK_GATE 0x38 +#define LPSS_PRIV_CLOCK_GATE_CLK_CTL_MASK 0x3 +#define LPSS_PRIV_CLOCK_GATE_CLK_CTL_FORCE_ON 0x3 + +struct lpss_config { + /* LPSS offset from drv_data->ioaddr */ + unsigned offset; + /* Register offsets from drv_data->lpss_base or -1 */ + int reg_general; + int reg_ssp; + int reg_cs_ctrl; + int reg_capabilities; + /* FIFO thresholds */ + u32 rx_threshold; + u32 tx_threshold_lo; + u32 tx_threshold_hi; + /* Chip select control */ + unsigned cs_sel_shift; + unsigned cs_sel_mask; + unsigned cs_num; + /* Quirks */ + unsigned cs_clk_stays_gated : 1; +}; + +/* Keep these sorted with enum pxa_ssp_type */ +static const struct lpss_config lpss_platforms[] = { + { /* LPSS_LPT_SSP */ + .offset = 0x800, + .reg_general = 0x08, + .reg_ssp = 0x0c, + .reg_cs_ctrl = 0x18, + .reg_capabilities = -1, + .rx_threshold = 64, + .tx_threshold_lo = 160, + .tx_threshold_hi = 224, + }, + { /* LPSS_BYT_SSP */ + .offset = 0x400, + .reg_general = 0x08, + .reg_ssp = 0x0c, + .reg_cs_ctrl = 0x18, + .reg_capabilities = -1, + .rx_threshold = 64, + .tx_threshold_lo = 160, + .tx_threshold_hi = 224, + }, + { /* LPSS_BSW_SSP */ + .offset = 0x400, + .reg_general = 0x08, + .reg_ssp = 0x0c, + .reg_cs_ctrl = 0x18, + .reg_capabilities = -1, + .rx_threshold = 64, + .tx_threshold_lo = 160, + .tx_threshold_hi = 224, + .cs_sel_shift = 2, + .cs_sel_mask = 1 << 2, + .cs_num = 2, + }, + { /* LPSS_SPT_SSP */ + .offset = 0x200, + .reg_general = -1, + .reg_ssp = 0x20, + .reg_cs_ctrl = 0x24, + .reg_capabilities = -1, + .rx_threshold = 1, + .tx_threshold_lo = 32, + .tx_threshold_hi = 56, + }, + { /* LPSS_BXT_SSP */ + .offset = 0x200, + .reg_general = -1, + .reg_ssp = 0x20, + .reg_cs_ctrl = 0x24, + .reg_capabilities = 0xfc, + .rx_threshold = 1, + .tx_threshold_lo = 16, + .tx_threshold_hi = 48, + .cs_sel_shift = 8, + .cs_sel_mask = 3 << 8, + .cs_clk_stays_gated = true, + }, + { /* LPSS_CNL_SSP */ + .offset = 0x200, + .reg_general = -1, + .reg_ssp = 0x20, + .reg_cs_ctrl = 0x24, + .reg_capabilities = 0xfc, + .rx_threshold = 1, + .tx_threshold_lo = 32, + .tx_threshold_hi = 56, + .cs_sel_shift = 8, + .cs_sel_mask = 3 << 8, + .cs_clk_stays_gated = true, + }, +}; + +static inline const struct lpss_config +*lpss_get_config(const struct driver_data *drv_data) +{ + return &lpss_platforms[drv_data->ssp_type - LPSS_LPT_SSP]; +} + +static bool is_lpss_ssp(const struct driver_data *drv_data) +{ + switch (drv_data->ssp_type) { + case LPSS_LPT_SSP: + case LPSS_BYT_SSP: + case LPSS_BSW_SSP: + case LPSS_SPT_SSP: + case LPSS_BXT_SSP: + case LPSS_CNL_SSP: + return true; + default: + return false; + } +} + +static bool is_quark_x1000_ssp(const struct driver_data *drv_data) +{ + return drv_data->ssp_type == QUARK_X1000_SSP; +} + +static bool is_mmp2_ssp(const struct driver_data *drv_data) +{ + return drv_data->ssp_type == MMP2_SSP; +} + +static bool is_mrfld_ssp(const struct driver_data *drv_data) +{ + return drv_data->ssp_type == MRFLD_SSP; +} + +static void pxa2xx_spi_update(const struct driver_data *drv_data, u32 reg, u32 mask, u32 value) +{ + if ((pxa2xx_spi_read(drv_data, reg) & mask) != value) + pxa2xx_spi_write(drv_data, reg, value & mask); +} + +static u32 pxa2xx_spi_get_ssrc1_change_mask(const struct driver_data *drv_data) +{ + switch (drv_data->ssp_type) { + case QUARK_X1000_SSP: + return QUARK_X1000_SSCR1_CHANGE_MASK; + case CE4100_SSP: + return CE4100_SSCR1_CHANGE_MASK; + default: + return SSCR1_CHANGE_MASK; + } +} + +static u32 +pxa2xx_spi_get_rx_default_thre(const struct driver_data *drv_data) +{ + switch (drv_data->ssp_type) { + case QUARK_X1000_SSP: + return RX_THRESH_QUARK_X1000_DFLT; + case CE4100_SSP: + return RX_THRESH_CE4100_DFLT; + default: + return RX_THRESH_DFLT; + } +} + +static bool pxa2xx_spi_txfifo_full(const struct driver_data *drv_data) +{ + u32 mask; + + switch (drv_data->ssp_type) { + case QUARK_X1000_SSP: + mask = QUARK_X1000_SSSR_TFL_MASK; + break; + case CE4100_SSP: + mask = CE4100_SSSR_TFL_MASK; + break; + default: + mask = SSSR_TFL_MASK; + break; + } + + return read_SSSR_bits(drv_data, mask) == mask; +} + +static void pxa2xx_spi_clear_rx_thre(const struct driver_data *drv_data, + u32 *sccr1_reg) +{ + u32 mask; + + switch (drv_data->ssp_type) { + case QUARK_X1000_SSP: + mask = QUARK_X1000_SSCR1_RFT; + break; + case CE4100_SSP: + mask = CE4100_SSCR1_RFT; + break; + default: + mask = SSCR1_RFT; + break; + } + *sccr1_reg &= ~mask; +} + +static void pxa2xx_spi_set_rx_thre(const struct driver_data *drv_data, + u32 *sccr1_reg, u32 threshold) +{ + switch (drv_data->ssp_type) { + case QUARK_X1000_SSP: + *sccr1_reg |= QUARK_X1000_SSCR1_RxTresh(threshold); + break; + case CE4100_SSP: + *sccr1_reg |= CE4100_SSCR1_RxTresh(threshold); + break; + default: + *sccr1_reg |= SSCR1_RxTresh(threshold); + break; + } +} + +static u32 pxa2xx_configure_sscr0(const struct driver_data *drv_data, + u32 clk_div, u8 bits) +{ + switch (drv_data->ssp_type) { + case QUARK_X1000_SSP: + return clk_div + | QUARK_X1000_SSCR0_Motorola + | QUARK_X1000_SSCR0_DataSize(bits > 32 ? 8 : bits); + default: + return clk_div + | SSCR0_Motorola + | SSCR0_DataSize(bits > 16 ? bits - 16 : bits) + | (bits > 16 ? SSCR0_EDSS : 0); + } +} + +/* + * Read and write LPSS SSP private registers. Caller must first check that + * is_lpss_ssp() returns true before these can be called. + */ +static u32 __lpss_ssp_read_priv(struct driver_data *drv_data, unsigned offset) +{ + WARN_ON(!drv_data->lpss_base); + return readl(drv_data->lpss_base + offset); +} + +static void __lpss_ssp_write_priv(struct driver_data *drv_data, + unsigned offset, u32 value) +{ + WARN_ON(!drv_data->lpss_base); + writel(value, drv_data->lpss_base + offset); +} + +/* + * lpss_ssp_setup - perform LPSS SSP specific setup + * @drv_data: pointer to the driver private data + * + * Perform LPSS SSP specific setup. This function must be called first if + * one is going to use LPSS SSP private registers. + */ +static void lpss_ssp_setup(struct driver_data *drv_data) +{ + const struct lpss_config *config; + u32 value; + + config = lpss_get_config(drv_data); + drv_data->lpss_base = drv_data->ssp->mmio_base + config->offset; + + /* Enable software chip select control */ + value = __lpss_ssp_read_priv(drv_data, config->reg_cs_ctrl); + value &= ~(LPSS_CS_CONTROL_SW_MODE | LPSS_CS_CONTROL_CS_HIGH); + value |= LPSS_CS_CONTROL_SW_MODE | LPSS_CS_CONTROL_CS_HIGH; + __lpss_ssp_write_priv(drv_data, config->reg_cs_ctrl, value); + + /* Enable multiblock DMA transfers */ + if (drv_data->controller_info->enable_dma) { + __lpss_ssp_write_priv(drv_data, config->reg_ssp, 1); + + if (config->reg_general >= 0) { + value = __lpss_ssp_read_priv(drv_data, + config->reg_general); + value |= LPSS_GENERAL_REG_RXTO_HOLDOFF_DISABLE; + __lpss_ssp_write_priv(drv_data, + config->reg_general, value); + } + } +} + +static void lpss_ssp_select_cs(struct spi_device *spi, + const struct lpss_config *config) +{ + struct driver_data *drv_data = + spi_controller_get_devdata(spi->controller); + u32 value, cs; + + if (!config->cs_sel_mask) + return; + + value = __lpss_ssp_read_priv(drv_data, config->reg_cs_ctrl); + + cs = spi_get_chipselect(spi, 0); + cs <<= config->cs_sel_shift; + if (cs != (value & config->cs_sel_mask)) { + /* + * When switching another chip select output active the + * output must be selected first and wait 2 ssp_clk cycles + * before changing state to active. Otherwise a short + * glitch will occur on the previous chip select since + * output select is latched but state control is not. + */ + value &= ~config->cs_sel_mask; + value |= cs; + __lpss_ssp_write_priv(drv_data, + config->reg_cs_ctrl, value); + ndelay(1000000000 / + (drv_data->controller->max_speed_hz / 2)); + } +} + +static void lpss_ssp_cs_control(struct spi_device *spi, bool enable) +{ + struct driver_data *drv_data = + spi_controller_get_devdata(spi->controller); + const struct lpss_config *config; + u32 value; + + config = lpss_get_config(drv_data); + + if (enable) + lpss_ssp_select_cs(spi, config); + + value = __lpss_ssp_read_priv(drv_data, config->reg_cs_ctrl); + if (enable) + value &= ~LPSS_CS_CONTROL_CS_HIGH; + else + value |= LPSS_CS_CONTROL_CS_HIGH; + __lpss_ssp_write_priv(drv_data, config->reg_cs_ctrl, value); + if (config->cs_clk_stays_gated) { + u32 clkgate; + + /* + * Changing CS alone when dynamic clock gating is on won't + * actually flip CS at that time. This ruins SPI transfers + * that specify delays, or have no data. Toggle the clock mode + * to force on briefly to poke the CS pin to move. + */ + clkgate = __lpss_ssp_read_priv(drv_data, LPSS_PRIV_CLOCK_GATE); + value = (clkgate & ~LPSS_PRIV_CLOCK_GATE_CLK_CTL_MASK) | + LPSS_PRIV_CLOCK_GATE_CLK_CTL_FORCE_ON; + + __lpss_ssp_write_priv(drv_data, LPSS_PRIV_CLOCK_GATE, value); + __lpss_ssp_write_priv(drv_data, LPSS_PRIV_CLOCK_GATE, clkgate); + } +} + +static void cs_assert(struct spi_device *spi) +{ + struct driver_data *drv_data = + spi_controller_get_devdata(spi->controller); + + if (drv_data->ssp_type == CE4100_SSP) { + pxa2xx_spi_write(drv_data, SSSR, spi_get_chipselect(spi, 0)); + return; + } + + if (is_lpss_ssp(drv_data)) + lpss_ssp_cs_control(spi, true); +} + +static void cs_deassert(struct spi_device *spi) +{ + struct driver_data *drv_data = + spi_controller_get_devdata(spi->controller); + unsigned long timeout; + + if (drv_data->ssp_type == CE4100_SSP) + return; + + /* Wait until SSP becomes idle before deasserting the CS */ + timeout = jiffies + msecs_to_jiffies(10); + while (pxa2xx_spi_read(drv_data, SSSR) & SSSR_BSY && + !time_after(jiffies, timeout)) + cpu_relax(); + + if (is_lpss_ssp(drv_data)) + lpss_ssp_cs_control(spi, false); +} + +static void pxa2xx_spi_set_cs(struct spi_device *spi, bool level) +{ + if (level) + cs_deassert(spi); + else + cs_assert(spi); +} + +int pxa2xx_spi_flush(struct driver_data *drv_data) +{ + unsigned long limit = loops_per_jiffy << 1; + + do { + while (read_SSSR_bits(drv_data, SSSR_RNE)) + pxa2xx_spi_read(drv_data, SSDR); + } while ((pxa2xx_spi_read(drv_data, SSSR) & SSSR_BSY) && --limit); + write_SSSR_CS(drv_data, SSSR_ROR); + + return limit; +} + +static void pxa2xx_spi_off(struct driver_data *drv_data) +{ + /* On MMP, disabling SSE seems to corrupt the Rx FIFO */ + if (is_mmp2_ssp(drv_data)) + return; + + pxa_ssp_disable(drv_data->ssp); +} + +static int null_writer(struct driver_data *drv_data) +{ + u8 n_bytes = drv_data->n_bytes; + + if (pxa2xx_spi_txfifo_full(drv_data) + || (drv_data->tx == drv_data->tx_end)) + return 0; + + pxa2xx_spi_write(drv_data, SSDR, 0); + drv_data->tx += n_bytes; + + return 1; +} + +static int null_reader(struct driver_data *drv_data) +{ + u8 n_bytes = drv_data->n_bytes; + + while (read_SSSR_bits(drv_data, SSSR_RNE) && drv_data->rx < drv_data->rx_end) { + pxa2xx_spi_read(drv_data, SSDR); + drv_data->rx += n_bytes; + } + + return drv_data->rx == drv_data->rx_end; +} + +static int u8_writer(struct driver_data *drv_data) +{ + if (pxa2xx_spi_txfifo_full(drv_data) + || (drv_data->tx == drv_data->tx_end)) + return 0; + + pxa2xx_spi_write(drv_data, SSDR, *(u8 *)(drv_data->tx)); + ++drv_data->tx; + + return 1; +} + +static int u8_reader(struct driver_data *drv_data) +{ + while (read_SSSR_bits(drv_data, SSSR_RNE) && drv_data->rx < drv_data->rx_end) { + *(u8 *)(drv_data->rx) = pxa2xx_spi_read(drv_data, SSDR); + ++drv_data->rx; + } + + return drv_data->rx == drv_data->rx_end; +} + +static int u16_writer(struct driver_data *drv_data) +{ + if (pxa2xx_spi_txfifo_full(drv_data) + || (drv_data->tx == drv_data->tx_end)) + return 0; + + pxa2xx_spi_write(drv_data, SSDR, *(u16 *)(drv_data->tx)); + drv_data->tx += 2; + + return 1; +} + +static int u16_reader(struct driver_data *drv_data) +{ + while (read_SSSR_bits(drv_data, SSSR_RNE) && drv_data->rx < drv_data->rx_end) { + *(u16 *)(drv_data->rx) = pxa2xx_spi_read(drv_data, SSDR); + drv_data->rx += 2; + } + + return drv_data->rx == drv_data->rx_end; +} + +static int u32_writer(struct driver_data *drv_data) +{ + if (pxa2xx_spi_txfifo_full(drv_data) + || (drv_data->tx == drv_data->tx_end)) + return 0; + + pxa2xx_spi_write(drv_data, SSDR, *(u32 *)(drv_data->tx)); + drv_data->tx += 4; + + return 1; +} + +static int u32_reader(struct driver_data *drv_data) +{ + while (read_SSSR_bits(drv_data, SSSR_RNE) && drv_data->rx < drv_data->rx_end) { + *(u32 *)(drv_data->rx) = pxa2xx_spi_read(drv_data, SSDR); + drv_data->rx += 4; + } + + return drv_data->rx == drv_data->rx_end; +} + +static void reset_sccr1(struct driver_data *drv_data) +{ + u32 mask = drv_data->int_cr1 | drv_data->dma_cr1, threshold; + struct chip_data *chip; + + if (drv_data->controller->cur_msg) { + chip = spi_get_ctldata(drv_data->controller->cur_msg->spi); + threshold = chip->threshold; + } else { + threshold = 0; + } + + switch (drv_data->ssp_type) { + case QUARK_X1000_SSP: + mask |= QUARK_X1000_SSCR1_RFT; + break; + case CE4100_SSP: + mask |= CE4100_SSCR1_RFT; + break; + default: + mask |= SSCR1_RFT; + break; + } + + pxa2xx_spi_update(drv_data, SSCR1, mask, threshold); +} + +static void int_stop_and_reset(struct driver_data *drv_data) +{ + /* Clear and disable interrupts */ + write_SSSR_CS(drv_data, drv_data->clear_sr); + reset_sccr1(drv_data); + if (pxa25x_ssp_comp(drv_data)) + return; + + pxa2xx_spi_write(drv_data, SSTO, 0); +} + +static void int_error_stop(struct driver_data *drv_data, const char *msg, int err) +{ + int_stop_and_reset(drv_data); + pxa2xx_spi_flush(drv_data); + pxa2xx_spi_off(drv_data); + + dev_err(drv_data->ssp->dev, "%s\n", msg); + + drv_data->controller->cur_msg->status = err; + spi_finalize_current_transfer(drv_data->controller); +} + +static void int_transfer_complete(struct driver_data *drv_data) +{ + int_stop_and_reset(drv_data); + + spi_finalize_current_transfer(drv_data->controller); +} + +static irqreturn_t interrupt_transfer(struct driver_data *drv_data) +{ + u32 irq_status; + + irq_status = read_SSSR_bits(drv_data, drv_data->mask_sr); + if (!(pxa2xx_spi_read(drv_data, SSCR1) & SSCR1_TIE)) + irq_status &= ~SSSR_TFS; + + if (irq_status & SSSR_ROR) { + int_error_stop(drv_data, "interrupt_transfer: FIFO overrun", -EIO); + return IRQ_HANDLED; + } + + if (irq_status & SSSR_TUR) { + int_error_stop(drv_data, "interrupt_transfer: FIFO underrun", -EIO); + return IRQ_HANDLED; + } + + if (irq_status & SSSR_TINT) { + pxa2xx_spi_write(drv_data, SSSR, SSSR_TINT); + if (drv_data->read(drv_data)) { + int_transfer_complete(drv_data); + return IRQ_HANDLED; + } + } + + /* Drain Rx FIFO, Fill Tx FIFO and prevent overruns */ + do { + if (drv_data->read(drv_data)) { + int_transfer_complete(drv_data); + return IRQ_HANDLED; + } + } while (drv_data->write(drv_data)); + + if (drv_data->read(drv_data)) { + int_transfer_complete(drv_data); + return IRQ_HANDLED; + } + + if (drv_data->tx == drv_data->tx_end) { + u32 bytes_left; + u32 sccr1_reg; + + sccr1_reg = pxa2xx_spi_read(drv_data, SSCR1); + sccr1_reg &= ~SSCR1_TIE; + + /* + * PXA25x_SSP has no timeout, set up Rx threshold for + * the remaining Rx bytes. + */ + if (pxa25x_ssp_comp(drv_data)) { + u32 rx_thre; + + pxa2xx_spi_clear_rx_thre(drv_data, &sccr1_reg); + + bytes_left = drv_data->rx_end - drv_data->rx; + switch (drv_data->n_bytes) { + case 4: + bytes_left >>= 2; + break; + case 2: + bytes_left >>= 1; + break; + } + + rx_thre = pxa2xx_spi_get_rx_default_thre(drv_data); + if (rx_thre > bytes_left) + rx_thre = bytes_left; + + pxa2xx_spi_set_rx_thre(drv_data, &sccr1_reg, rx_thre); + } + pxa2xx_spi_write(drv_data, SSCR1, sccr1_reg); + } + + /* We did something */ + return IRQ_HANDLED; +} + +static void handle_bad_msg(struct driver_data *drv_data) +{ + int_stop_and_reset(drv_data); + pxa2xx_spi_off(drv_data); + + dev_err(drv_data->ssp->dev, "bad message state in interrupt handler\n"); +} + +static irqreturn_t ssp_int(int irq, void *dev_id) +{ + struct driver_data *drv_data = dev_id; + u32 sccr1_reg; + u32 mask = drv_data->mask_sr; + u32 status; + + /* + * The IRQ might be shared with other peripherals so we must first + * check that are we RPM suspended or not. If we are we assume that + * the IRQ was not for us (we shouldn't be RPM suspended when the + * interrupt is enabled). + */ + if (pm_runtime_suspended(drv_data->ssp->dev)) + return IRQ_NONE; + + /* + * If the device is not yet in RPM suspended state and we get an + * interrupt that is meant for another device, check if status bits + * are all set to one. That means that the device is already + * powered off. + */ + status = pxa2xx_spi_read(drv_data, SSSR); + if (status == ~0) + return IRQ_NONE; + + sccr1_reg = pxa2xx_spi_read(drv_data, SSCR1); + + /* Ignore possible writes if we don't need to write */ + if (!(sccr1_reg & SSCR1_TIE)) + mask &= ~SSSR_TFS; + + /* Ignore RX timeout interrupt if it is disabled */ + if (!(sccr1_reg & SSCR1_TINTE)) + mask &= ~SSSR_TINT; + + if (!(status & mask)) + return IRQ_NONE; + + pxa2xx_spi_write(drv_data, SSCR1, sccr1_reg & ~drv_data->int_cr1); + pxa2xx_spi_write(drv_data, SSCR1, sccr1_reg); + + if (!drv_data->controller->cur_msg) { + handle_bad_msg(drv_data); + /* Never fail */ + return IRQ_HANDLED; + } + + return drv_data->transfer_handler(drv_data); +} + +/* + * The Quark SPI has an additional 24 bit register (DDS_CLK_RATE) to multiply + * input frequency by fractions of 2^24. It also has a divider by 5. + * + * There are formulas to get baud rate value for given input frequency and + * divider parameters, such as DDS_CLK_RATE and SCR: + * + * Fsys = 200MHz + * + * Fssp = Fsys * DDS_CLK_RATE / 2^24 (1) + * Baud rate = Fsclk = Fssp / (2 * (SCR + 1)) (2) + * + * DDS_CLK_RATE either 2^n or 2^n / 5. + * SCR is in range 0 .. 255 + * + * Divisor = 5^i * 2^j * 2 * k + * i = [0, 1] i = 1 iff j = 0 or j > 3 + * j = [0, 23] j = 0 iff i = 1 + * k = [1, 256] + * Special case: j = 0, i = 1: Divisor = 2 / 5 + * + * Accordingly to the specification the recommended values for DDS_CLK_RATE + * are: + * Case 1: 2^n, n = [0, 23] + * Case 2: 2^24 * 2 / 5 (0x666666) + * Case 3: less than or equal to 2^24 / 5 / 16 (0x33333) + * + * In all cases the lowest possible value is better. + * + * The function calculates parameters for all cases and chooses the one closest + * to the asked baud rate. + */ +static unsigned int quark_x1000_get_clk_div(int rate, u32 *dds) +{ + unsigned long xtal = 200000000; + unsigned long fref = xtal / 2; /* mandatory division by 2, + see (2) */ + /* case 3 */ + unsigned long fref1 = fref / 2; /* case 1 */ + unsigned long fref2 = fref * 2 / 5; /* case 2 */ + unsigned long scale; + unsigned long q, q1, q2; + long r, r1, r2; + u32 mul; + + /* Case 1 */ + + /* Set initial value for DDS_CLK_RATE */ + mul = (1 << 24) >> 1; + + /* Calculate initial quot */ + q1 = DIV_ROUND_UP(fref1, rate); + + /* Scale q1 if it's too big */ + if (q1 > 256) { + /* Scale q1 to range [1, 512] */ + scale = fls_long(q1 - 1); + if (scale > 9) { + q1 >>= scale - 9; + mul >>= scale - 9; + } + + /* Round the result if we have a remainder */ + q1 += q1 & 1; + } + + /* Decrease DDS_CLK_RATE as much as we can without loss in precision */ + scale = __ffs(q1); + q1 >>= scale; + mul >>= scale; + + /* Get the remainder */ + r1 = abs(fref1 / (1 << (24 - fls_long(mul))) / q1 - rate); + + /* Case 2 */ + + q2 = DIV_ROUND_UP(fref2, rate); + r2 = abs(fref2 / q2 - rate); + + /* + * Choose the best between two: less remainder we have the better. We + * can't go case 2 if q2 is greater than 256 since SCR register can + * hold only values 0 .. 255. + */ + if (r2 >= r1 || q2 > 256) { + /* case 1 is better */ + r = r1; + q = q1; + } else { + /* case 2 is better */ + r = r2; + q = q2; + mul = (1 << 24) * 2 / 5; + } + + /* Check case 3 only if the divisor is big enough */ + if (fref / rate >= 80) { + u64 fssp; + u32 m; + + /* Calculate initial quot */ + q1 = DIV_ROUND_UP(fref, rate); + m = (1 << 24) / q1; + + /* Get the remainder */ + fssp = (u64)fref * m; + do_div(fssp, 1 << 24); + r1 = abs(fssp - rate); + + /* Choose this one if it suits better */ + if (r1 < r) { + /* case 3 is better */ + q = 1; + mul = m; + } + } + + *dds = mul; + return q - 1; +} + +static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate) +{ + unsigned long ssp_clk = drv_data->controller->max_speed_hz; + const struct ssp_device *ssp = drv_data->ssp; + + rate = min_t(int, ssp_clk, rate); + + /* + * Calculate the divisor for the SCR (Serial Clock Rate), avoiding + * that the SSP transmission rate can be greater than the device rate. + */ + if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP) + return (DIV_ROUND_UP(ssp_clk, 2 * rate) - 1) & 0xff; + else + return (DIV_ROUND_UP(ssp_clk, rate) - 1) & 0xfff; +} + +static unsigned int pxa2xx_ssp_get_clk_div(struct driver_data *drv_data, + int rate) +{ + struct chip_data *chip = + spi_get_ctldata(drv_data->controller->cur_msg->spi); + unsigned int clk_div; + + switch (drv_data->ssp_type) { + case QUARK_X1000_SSP: + clk_div = quark_x1000_get_clk_div(rate, &chip->dds_rate); + break; + default: + clk_div = ssp_get_clk_div(drv_data, rate); + break; + } + return clk_div << 8; +} + +static bool pxa2xx_spi_can_dma(struct spi_controller *controller, + struct spi_device *spi, + struct spi_transfer *xfer) +{ + struct chip_data *chip = spi_get_ctldata(spi); + + return chip->enable_dma && + xfer->len <= MAX_DMA_LEN && + xfer->len >= chip->dma_burst_size; +} + +static int pxa2xx_spi_transfer_one(struct spi_controller *controller, + struct spi_device *spi, + struct spi_transfer *transfer) +{ + struct driver_data *drv_data = spi_controller_get_devdata(controller); + struct spi_message *message = controller->cur_msg; + struct chip_data *chip = spi_get_ctldata(spi); + u32 dma_thresh = chip->dma_threshold; + u32 dma_burst = chip->dma_burst_size; + u32 change_mask = pxa2xx_spi_get_ssrc1_change_mask(drv_data); + u32 clk_div; + u8 bits; + u32 speed; + u32 cr0; + u32 cr1; + int err; + int dma_mapped; + + /* Check if we can DMA this transfer */ + if (transfer->len > MAX_DMA_LEN && chip->enable_dma) { + + /* Reject already-mapped transfers; PIO won't always work */ + if (message->is_dma_mapped + || transfer->rx_dma || transfer->tx_dma) { + dev_err(&spi->dev, + "Mapped transfer length of %u is greater than %d\n", + transfer->len, MAX_DMA_LEN); + return -EINVAL; + } + + /* Warn ... we force this to PIO mode */ + dev_warn_ratelimited(&spi->dev, + "DMA disabled for transfer length %u greater than %d\n", + transfer->len, MAX_DMA_LEN); + } + + /* Setup the transfer state based on the type of transfer */ + if (pxa2xx_spi_flush(drv_data) == 0) { + dev_err(&spi->dev, "Flush failed\n"); + return -EIO; + } + drv_data->tx = (void *)transfer->tx_buf; + drv_data->tx_end = drv_data->tx + transfer->len; + drv_data->rx = transfer->rx_buf; + drv_data->rx_end = drv_data->rx + transfer->len; + + /* Change speed and bit per word on a per transfer */ + bits = transfer->bits_per_word; + speed = transfer->speed_hz; + + clk_div = pxa2xx_ssp_get_clk_div(drv_data, speed); + + if (bits <= 8) { + drv_data->n_bytes = 1; + drv_data->read = drv_data->rx ? u8_reader : null_reader; + drv_data->write = drv_data->tx ? u8_writer : null_writer; + } else if (bits <= 16) { + drv_data->n_bytes = 2; + drv_data->read = drv_data->rx ? u16_reader : null_reader; + drv_data->write = drv_data->tx ? u16_writer : null_writer; + } else if (bits <= 32) { + drv_data->n_bytes = 4; + drv_data->read = drv_data->rx ? u32_reader : null_reader; + drv_data->write = drv_data->tx ? u32_writer : null_writer; + } + /* + * If bits per word is changed in DMA mode, then must check + * the thresholds and burst also. + */ + if (chip->enable_dma) { + if (pxa2xx_spi_set_dma_burst_and_threshold(chip, + spi, + bits, &dma_burst, + &dma_thresh)) + dev_warn_ratelimited(&spi->dev, + "DMA burst size reduced to match bits_per_word\n"); + } + + dma_mapped = controller->can_dma && + controller->can_dma(controller, spi, transfer) && + controller->cur_msg_mapped; + if (dma_mapped) { + + /* Ensure we have the correct interrupt handler */ + drv_data->transfer_handler = pxa2xx_spi_dma_transfer; + + err = pxa2xx_spi_dma_prepare(drv_data, transfer); + if (err) + return err; + + /* Clear status and start DMA engine */ + cr1 = chip->cr1 | dma_thresh | drv_data->dma_cr1; + pxa2xx_spi_write(drv_data, SSSR, drv_data->clear_sr); + + pxa2xx_spi_dma_start(drv_data); + } else { + /* Ensure we have the correct interrupt handler */ + drv_data->transfer_handler = interrupt_transfer; + + /* Clear status */ + cr1 = chip->cr1 | chip->threshold | drv_data->int_cr1; + write_SSSR_CS(drv_data, drv_data->clear_sr); + } + + /* NOTE: PXA25x_SSP _could_ use external clocking ... */ + cr0 = pxa2xx_configure_sscr0(drv_data, clk_div, bits); + if (!pxa25x_ssp_comp(drv_data)) + dev_dbg(&spi->dev, "%u Hz actual, %s\n", + controller->max_speed_hz + / (1 + ((cr0 & SSCR0_SCR(0xfff)) >> 8)), + dma_mapped ? "DMA" : "PIO"); + else + dev_dbg(&spi->dev, "%u Hz actual, %s\n", + controller->max_speed_hz / 2 + / (1 + ((cr0 & SSCR0_SCR(0x0ff)) >> 8)), + dma_mapped ? "DMA" : "PIO"); + + if (is_lpss_ssp(drv_data)) { + pxa2xx_spi_update(drv_data, SSIRF, GENMASK(7, 0), chip->lpss_rx_threshold); + pxa2xx_spi_update(drv_data, SSITF, GENMASK(15, 0), chip->lpss_tx_threshold); + } + + if (is_mrfld_ssp(drv_data)) { + u32 mask = SFIFOTT_RFT | SFIFOTT_TFT; + u32 thresh = 0; + + thresh |= SFIFOTT_RxThresh(chip->lpss_rx_threshold); + thresh |= SFIFOTT_TxThresh(chip->lpss_tx_threshold); + + pxa2xx_spi_update(drv_data, SFIFOTT, mask, thresh); + } + + if (is_quark_x1000_ssp(drv_data)) + pxa2xx_spi_update(drv_data, DDS_RATE, GENMASK(23, 0), chip->dds_rate); + + /* Stop the SSP */ + if (!is_mmp2_ssp(drv_data)) + pxa_ssp_disable(drv_data->ssp); + + if (!pxa25x_ssp_comp(drv_data)) + pxa2xx_spi_write(drv_data, SSTO, chip->timeout); + + /* First set CR1 without interrupt and service enables */ + pxa2xx_spi_update(drv_data, SSCR1, change_mask, cr1); + + /* See if we need to reload the configuration registers */ + pxa2xx_spi_update(drv_data, SSCR0, GENMASK(31, 0), cr0); + + /* Restart the SSP */ + pxa_ssp_enable(drv_data->ssp); + + if (is_mmp2_ssp(drv_data)) { + u8 tx_level = read_SSSR_bits(drv_data, SSSR_TFL_MASK) >> 8; + + if (tx_level) { + /* On MMP2, flipping SSE doesn't to empty Tx FIFO. */ + dev_warn(&spi->dev, "%u bytes of garbage in Tx FIFO!\n", tx_level); + if (tx_level > transfer->len) + tx_level = transfer->len; + drv_data->tx += tx_level; + } + } + + if (spi_controller_is_target(controller)) { + while (drv_data->write(drv_data)) + ; + if (drv_data->gpiod_ready) { + gpiod_set_value(drv_data->gpiod_ready, 1); + udelay(1); + gpiod_set_value(drv_data->gpiod_ready, 0); + } + } + + /* + * Release the data by enabling service requests and interrupts, + * without changing any mode bits. + */ + pxa2xx_spi_write(drv_data, SSCR1, cr1); + + return 1; +} + +static int pxa2xx_spi_target_abort(struct spi_controller *controller) +{ + struct driver_data *drv_data = spi_controller_get_devdata(controller); + + int_error_stop(drv_data, "transfer aborted", -EINTR); + + return 0; +} + +static void pxa2xx_spi_handle_err(struct spi_controller *controller, + struct spi_message *msg) +{ + struct driver_data *drv_data = spi_controller_get_devdata(controller); + + int_stop_and_reset(drv_data); + + /* Disable the SSP */ + pxa2xx_spi_off(drv_data); + + /* + * Stop the DMA if running. Note DMA callback handler may have unset + * the dma_running already, which is fine as stopping is not needed + * then but we shouldn't rely this flag for anything else than + * stopping. For instance to differentiate between PIO and DMA + * transfers. + */ + if (atomic_read(&drv_data->dma_running)) + pxa2xx_spi_dma_stop(drv_data); +} + +static int pxa2xx_spi_unprepare_transfer(struct spi_controller *controller) +{ + struct driver_data *drv_data = spi_controller_get_devdata(controller); + + /* Disable the SSP now */ + pxa2xx_spi_off(drv_data); + + return 0; +} + +static int setup(struct spi_device *spi) +{ + struct pxa2xx_spi_chip *chip_info; + struct chip_data *chip; + const struct lpss_config *config; + struct driver_data *drv_data = + spi_controller_get_devdata(spi->controller); + uint tx_thres, tx_hi_thres, rx_thres; + + switch (drv_data->ssp_type) { + case QUARK_X1000_SSP: + tx_thres = TX_THRESH_QUARK_X1000_DFLT; + tx_hi_thres = 0; + rx_thres = RX_THRESH_QUARK_X1000_DFLT; + break; + case MRFLD_SSP: + tx_thres = TX_THRESH_MRFLD_DFLT; + tx_hi_thres = 0; + rx_thres = RX_THRESH_MRFLD_DFLT; + break; + case CE4100_SSP: + tx_thres = TX_THRESH_CE4100_DFLT; + tx_hi_thres = 0; + rx_thres = RX_THRESH_CE4100_DFLT; + break; + case LPSS_LPT_SSP: + case LPSS_BYT_SSP: + case LPSS_BSW_SSP: + case LPSS_SPT_SSP: + case LPSS_BXT_SSP: + case LPSS_CNL_SSP: + config = lpss_get_config(drv_data); + tx_thres = config->tx_threshold_lo; + tx_hi_thres = config->tx_threshold_hi; + rx_thres = config->rx_threshold; + break; + default: + tx_hi_thres = 0; + if (spi_controller_is_target(drv_data->controller)) { + tx_thres = 1; + rx_thres = 2; + } else { + tx_thres = TX_THRESH_DFLT; + rx_thres = RX_THRESH_DFLT; + } + break; + } + + /* Only allocate on the first setup */ + chip = spi_get_ctldata(spi); + if (!chip) { + chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + if (drv_data->ssp_type == CE4100_SSP) { + if (spi_get_chipselect(spi, 0) > 4) { + dev_err(&spi->dev, + "failed setup: cs number must not be > 4.\n"); + kfree(chip); + return -EINVAL; + } + } + chip->enable_dma = drv_data->controller_info->enable_dma; + chip->timeout = TIMOUT_DFLT; + } + + /* + * Protocol drivers may change the chip settings, so... + * if chip_info exists, use it. + */ + chip_info = spi->controller_data; + + /* chip_info isn't always needed */ + if (chip_info) { + if (chip_info->timeout) + chip->timeout = chip_info->timeout; + if (chip_info->tx_threshold) + tx_thres = chip_info->tx_threshold; + if (chip_info->tx_hi_threshold) + tx_hi_thres = chip_info->tx_hi_threshold; + if (chip_info->rx_threshold) + rx_thres = chip_info->rx_threshold; + chip->dma_threshold = 0; + } + + chip->cr1 = 0; + if (spi_controller_is_target(drv_data->controller)) { + chip->cr1 |= SSCR1_SCFR; + chip->cr1 |= SSCR1_SCLKDIR; + chip->cr1 |= SSCR1_SFRMDIR; + chip->cr1 |= SSCR1_SPH; + } + + if (is_lpss_ssp(drv_data)) { + chip->lpss_rx_threshold = SSIRF_RxThresh(rx_thres); + chip->lpss_tx_threshold = SSITF_TxLoThresh(tx_thres) | + SSITF_TxHiThresh(tx_hi_thres); + } + + if (is_mrfld_ssp(drv_data)) { + chip->lpss_rx_threshold = rx_thres; + chip->lpss_tx_threshold = tx_thres; + } + + /* + * Set DMA burst and threshold outside of chip_info path so that if + * chip_info goes away after setting chip->enable_dma, the burst and + * threshold can still respond to changes in bits_per_word. + */ + if (chip->enable_dma) { + /* Set up legal burst and threshold for DMA */ + if (pxa2xx_spi_set_dma_burst_and_threshold(chip, spi, + spi->bits_per_word, + &chip->dma_burst_size, + &chip->dma_threshold)) { + dev_warn(&spi->dev, + "in setup: DMA burst size reduced to match bits_per_word\n"); + } + dev_dbg(&spi->dev, + "in setup: DMA burst size set to %u\n", + chip->dma_burst_size); + } + + switch (drv_data->ssp_type) { + case QUARK_X1000_SSP: + chip->threshold = (QUARK_X1000_SSCR1_RxTresh(rx_thres) + & QUARK_X1000_SSCR1_RFT) + | (QUARK_X1000_SSCR1_TxTresh(tx_thres) + & QUARK_X1000_SSCR1_TFT); + break; + case CE4100_SSP: + chip->threshold = (CE4100_SSCR1_RxTresh(rx_thres) & CE4100_SSCR1_RFT) | + (CE4100_SSCR1_TxTresh(tx_thres) & CE4100_SSCR1_TFT); + break; + default: + chip->threshold = (SSCR1_RxTresh(rx_thres) & SSCR1_RFT) | + (SSCR1_TxTresh(tx_thres) & SSCR1_TFT); + break; + } + + chip->cr1 &= ~(SSCR1_SPO | SSCR1_SPH); + chip->cr1 |= ((spi->mode & SPI_CPHA) ? SSCR1_SPH : 0) | + ((spi->mode & SPI_CPOL) ? SSCR1_SPO : 0); + + if (spi->mode & SPI_LOOP) + chip->cr1 |= SSCR1_LBM; + + spi_set_ctldata(spi, chip); + + return 0; +} + +static void cleanup(struct spi_device *spi) +{ + struct chip_data *chip = spi_get_ctldata(spi); + + kfree(chip); +} + +static bool pxa2xx_spi_idma_filter(struct dma_chan *chan, void *param) +{ + return param == chan->device->dev; +} + +static struct pxa2xx_spi_controller * +pxa2xx_spi_init_pdata(struct platform_device *pdev) +{ + struct pxa2xx_spi_controller *pdata; + struct device *dev = &pdev->dev; + struct device *parent = dev->parent; + struct ssp_device *ssp; + struct resource *res; + enum pxa_ssp_type type = SSP_UNDEFINED; + const void *match; + bool is_lpss_priv; + int status; + u64 uid; + + is_lpss_priv = platform_get_resource_byname(pdev, IORESOURCE_MEM, "lpss_priv"); + + match = device_get_match_data(dev); + if (match) + type = (uintptr_t)match; + else if (is_lpss_priv) { + u32 value; + + status = device_property_read_u32(dev, "intel,spi-pxa2xx-type", &value); + if (status) + return ERR_PTR(status); + + type = (enum pxa_ssp_type)value; + } + + /* Validate the SSP type correctness */ + if (!(type > SSP_UNDEFINED && type < SSP_MAX)) + return ERR_PTR(-EINVAL); + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return ERR_PTR(-ENOMEM); + + ssp = &pdata->ssp; + + ssp->mmio_base = devm_platform_get_and_ioremap_resource(pdev, 0, &res); + if (IS_ERR(ssp->mmio_base)) + return ERR_CAST(ssp->mmio_base); + + ssp->phys_base = res->start; + + /* Platforms with iDMA 64-bit */ + if (is_lpss_priv) { + pdata->tx_param = parent; + pdata->rx_param = parent; + pdata->dma_filter = pxa2xx_spi_idma_filter; + } + + ssp->clk = devm_clk_get(dev, NULL); + if (IS_ERR(ssp->clk)) + return ERR_CAST(ssp->clk); + + ssp->irq = platform_get_irq(pdev, 0); + if (ssp->irq < 0) + return ERR_PTR(ssp->irq); + + ssp->type = type; + ssp->dev = dev; + + status = acpi_dev_uid_to_integer(ACPI_COMPANION(dev), &uid); + if (status) + ssp->port_id = -1; + else + ssp->port_id = uid; + + pdata->is_target = device_property_read_bool(dev, "spi-slave"); + pdata->num_chipselect = 1; + pdata->enable_dma = true; + pdata->dma_burst_size = 1; + + return pdata; +} + +static int pxa2xx_spi_fw_translate_cs(struct spi_controller *controller, + unsigned int cs) +{ + struct driver_data *drv_data = spi_controller_get_devdata(controller); + + if (has_acpi_companion(drv_data->ssp->dev)) { + switch (drv_data->ssp_type) { + /* + * For Atoms the ACPI DeviceSelection used by the Windows + * driver starts from 1 instead of 0 so translate it here + * to match what Linux expects. + */ + case LPSS_BYT_SSP: + case LPSS_BSW_SSP: + return cs - 1; + + default: + break; + } + } + + return cs; +} + +static size_t pxa2xx_spi_max_dma_transfer_size(struct spi_device *spi) +{ + return MAX_DMA_LEN; +} + +static int pxa2xx_spi_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct pxa2xx_spi_controller *platform_info; + struct spi_controller *controller; + struct driver_data *drv_data; + struct ssp_device *ssp; + const struct lpss_config *config; + int status; + u32 tmp; + + platform_info = dev_get_platdata(dev); + if (!platform_info) { + platform_info = pxa2xx_spi_init_pdata(pdev); + if (IS_ERR(platform_info)) { + dev_err(&pdev->dev, "missing platform data\n"); + return PTR_ERR(platform_info); + } + } + + ssp = pxa_ssp_request(pdev->id, pdev->name); + if (!ssp) + ssp = &platform_info->ssp; + + if (!ssp->mmio_base) { + dev_err(&pdev->dev, "failed to get SSP\n"); + return -ENODEV; + } + + if (platform_info->is_target) + controller = devm_spi_alloc_target(dev, sizeof(*drv_data)); + else + controller = devm_spi_alloc_host(dev, sizeof(*drv_data)); + + if (!controller) { + dev_err(&pdev->dev, "cannot alloc spi_controller\n"); + status = -ENOMEM; + goto out_error_controller_alloc; + } + drv_data = spi_controller_get_devdata(controller); + drv_data->controller = controller; + drv_data->controller_info = platform_info; + drv_data->ssp = ssp; + + device_set_node(&controller->dev, dev_fwnode(dev)); + + /* The spi->mode bits understood by this driver: */ + controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP; + + controller->bus_num = ssp->port_id; + controller->dma_alignment = DMA_ALIGNMENT; + controller->cleanup = cleanup; + controller->setup = setup; + controller->set_cs = pxa2xx_spi_set_cs; + controller->transfer_one = pxa2xx_spi_transfer_one; + controller->target_abort = pxa2xx_spi_target_abort; + controller->handle_err = pxa2xx_spi_handle_err; + controller->unprepare_transfer_hardware = pxa2xx_spi_unprepare_transfer; + controller->fw_translate_cs = pxa2xx_spi_fw_translate_cs; + controller->auto_runtime_pm = true; + controller->flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX; + + drv_data->ssp_type = ssp->type; + + if (pxa25x_ssp_comp(drv_data)) { + switch (drv_data->ssp_type) { + case QUARK_X1000_SSP: + controller->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32); + break; + default: + controller->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16); + break; + } + + drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE; + drv_data->dma_cr1 = 0; + drv_data->clear_sr = SSSR_ROR; + drv_data->mask_sr = SSSR_RFS | SSSR_TFS | SSSR_ROR; + } else { + controller->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32); + drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE | SSCR1_TINTE; + drv_data->dma_cr1 = DEFAULT_DMA_CR1; + drv_data->clear_sr = SSSR_ROR | SSSR_TINT; + drv_data->mask_sr = SSSR_TINT | SSSR_RFS | SSSR_TFS + | SSSR_ROR | SSSR_TUR; + } + + status = request_irq(ssp->irq, ssp_int, IRQF_SHARED, dev_name(dev), + drv_data); + if (status < 0) { + dev_err(&pdev->dev, "cannot get IRQ %d\n", ssp->irq); + goto out_error_controller_alloc; + } + + /* Setup DMA if requested */ + if (platform_info->enable_dma) { + status = pxa2xx_spi_dma_setup(drv_data); + if (status) { + dev_warn(dev, "no DMA channels available, using PIO\n"); + platform_info->enable_dma = false; + } else { + controller->can_dma = pxa2xx_spi_can_dma; + controller->max_dma_len = MAX_DMA_LEN; + controller->max_transfer_size = + pxa2xx_spi_max_dma_transfer_size; + } + } + + /* Enable SOC clock */ + status = clk_prepare_enable(ssp->clk); + if (status) + goto out_error_dma_irq_alloc; + + controller->max_speed_hz = clk_get_rate(ssp->clk); + /* + * Set minimum speed for all other platforms than Intel Quark which is + * able do under 1 Hz transfers. + */ + if (!pxa25x_ssp_comp(drv_data)) + controller->min_speed_hz = + DIV_ROUND_UP(controller->max_speed_hz, 4096); + else if (!is_quark_x1000_ssp(drv_data)) + controller->min_speed_hz = + DIV_ROUND_UP(controller->max_speed_hz, 512); + + pxa_ssp_disable(ssp); + + /* Load default SSP configuration */ + switch (drv_data->ssp_type) { + case QUARK_X1000_SSP: + tmp = QUARK_X1000_SSCR1_RxTresh(RX_THRESH_QUARK_X1000_DFLT) | + QUARK_X1000_SSCR1_TxTresh(TX_THRESH_QUARK_X1000_DFLT); + pxa2xx_spi_write(drv_data, SSCR1, tmp); + + /* Using the Motorola SPI protocol and use 8 bit frame */ + tmp = QUARK_X1000_SSCR0_Motorola | QUARK_X1000_SSCR0_DataSize(8); + pxa2xx_spi_write(drv_data, SSCR0, tmp); + break; + case CE4100_SSP: + tmp = CE4100_SSCR1_RxTresh(RX_THRESH_CE4100_DFLT) | + CE4100_SSCR1_TxTresh(TX_THRESH_CE4100_DFLT); + pxa2xx_spi_write(drv_data, SSCR1, tmp); + tmp = SSCR0_SCR(2) | SSCR0_Motorola | SSCR0_DataSize(8); + pxa2xx_spi_write(drv_data, SSCR0, tmp); + break; + default: + + if (spi_controller_is_target(controller)) { + tmp = SSCR1_SCFR | + SSCR1_SCLKDIR | + SSCR1_SFRMDIR | + SSCR1_RxTresh(2) | + SSCR1_TxTresh(1) | + SSCR1_SPH; + } else { + tmp = SSCR1_RxTresh(RX_THRESH_DFLT) | + SSCR1_TxTresh(TX_THRESH_DFLT); + } + pxa2xx_spi_write(drv_data, SSCR1, tmp); + tmp = SSCR0_Motorola | SSCR0_DataSize(8); + if (!spi_controller_is_target(controller)) + tmp |= SSCR0_SCR(2); + pxa2xx_spi_write(drv_data, SSCR0, tmp); + break; + } + + if (!pxa25x_ssp_comp(drv_data)) + pxa2xx_spi_write(drv_data, SSTO, 0); + + if (!is_quark_x1000_ssp(drv_data)) + pxa2xx_spi_write(drv_data, SSPSP, 0); + + if (is_lpss_ssp(drv_data)) { + lpss_ssp_setup(drv_data); + config = lpss_get_config(drv_data); + if (config->reg_capabilities >= 0) { + tmp = __lpss_ssp_read_priv(drv_data, + config->reg_capabilities); + tmp &= LPSS_CAPS_CS_EN_MASK; + tmp >>= LPSS_CAPS_CS_EN_SHIFT; + platform_info->num_chipselect = ffz(tmp); + } else if (config->cs_num) { + platform_info->num_chipselect = config->cs_num; + } + } + controller->num_chipselect = platform_info->num_chipselect; + controller->use_gpio_descriptors = true; + + if (platform_info->is_target) { + drv_data->gpiod_ready = devm_gpiod_get_optional(dev, + "ready", GPIOD_OUT_LOW); + if (IS_ERR(drv_data->gpiod_ready)) { + status = PTR_ERR(drv_data->gpiod_ready); + goto out_error_clock_enabled; + } + } + + pm_runtime_set_autosuspend_delay(&pdev->dev, 50); + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + + /* Register with the SPI framework */ + platform_set_drvdata(pdev, drv_data); + status = spi_register_controller(controller); + if (status) { + dev_err(&pdev->dev, "problem registering SPI controller\n"); + goto out_error_pm_runtime_enabled; + } + + return status; + +out_error_pm_runtime_enabled: + pm_runtime_disable(&pdev->dev); + +out_error_clock_enabled: + clk_disable_unprepare(ssp->clk); + +out_error_dma_irq_alloc: + pxa2xx_spi_dma_release(drv_data); + free_irq(ssp->irq, drv_data); + +out_error_controller_alloc: + pxa_ssp_free(ssp); + return status; +} + +static void pxa2xx_spi_remove(struct platform_device *pdev) +{ + struct driver_data *drv_data = platform_get_drvdata(pdev); + struct ssp_device *ssp = drv_data->ssp; + + pm_runtime_get_sync(&pdev->dev); + + spi_unregister_controller(drv_data->controller); + + /* Disable the SSP at the peripheral and SOC level */ + pxa_ssp_disable(ssp); + clk_disable_unprepare(ssp->clk); + + /* Release DMA */ + if (drv_data->controller_info->enable_dma) + pxa2xx_spi_dma_release(drv_data); + + pm_runtime_put_noidle(&pdev->dev); + pm_runtime_disable(&pdev->dev); + + /* Release IRQ */ + free_irq(ssp->irq, drv_data); + + /* Release SSP */ + pxa_ssp_free(ssp); +} + +static int pxa2xx_spi_suspend(struct device *dev) +{ + struct driver_data *drv_data = dev_get_drvdata(dev); + struct ssp_device *ssp = drv_data->ssp; + int status; + + status = spi_controller_suspend(drv_data->controller); + if (status) + return status; + + pxa_ssp_disable(ssp); + + if (!pm_runtime_suspended(dev)) + clk_disable_unprepare(ssp->clk); + + return 0; +} + +static int pxa2xx_spi_resume(struct device *dev) +{ + struct driver_data *drv_data = dev_get_drvdata(dev); + struct ssp_device *ssp = drv_data->ssp; + int status; + + /* Enable the SSP clock */ + if (!pm_runtime_suspended(dev)) { + status = clk_prepare_enable(ssp->clk); + if (status) + return status; + } + + /* Start the queue running */ + return spi_controller_resume(drv_data->controller); +} + +static int pxa2xx_spi_runtime_suspend(struct device *dev) +{ + struct driver_data *drv_data = dev_get_drvdata(dev); + + clk_disable_unprepare(drv_data->ssp->clk); + return 0; +} + +static int pxa2xx_spi_runtime_resume(struct device *dev) +{ + struct driver_data *drv_data = dev_get_drvdata(dev); + + return clk_prepare_enable(drv_data->ssp->clk); +} + +static const struct dev_pm_ops pxa2xx_spi_pm_ops = { + SYSTEM_SLEEP_PM_OPS(pxa2xx_spi_suspend, pxa2xx_spi_resume) + RUNTIME_PM_OPS(pxa2xx_spi_runtime_suspend, pxa2xx_spi_runtime_resume, NULL) +}; + +#ifdef CONFIG_ACPI +static const struct acpi_device_id pxa2xx_spi_acpi_match[] = { + { "80860F0E", LPSS_BYT_SSP }, + { "8086228E", LPSS_BSW_SSP }, + { "INT33C0", LPSS_LPT_SSP }, + { "INT33C1", LPSS_LPT_SSP }, + { "INT3430", LPSS_LPT_SSP }, + { "INT3431", LPSS_LPT_SSP }, + {} +}; +MODULE_DEVICE_TABLE(acpi, pxa2xx_spi_acpi_match); +#endif + +static const struct of_device_id pxa2xx_spi_of_match[] __maybe_unused = { + { .compatible = "marvell,mmp2-ssp", .data = (void *)MMP2_SSP }, + {} +}; +MODULE_DEVICE_TABLE(of, pxa2xx_spi_of_match); + +static struct platform_driver driver = { + .driver = { + .name = "pxa2xx-spi", + .pm = pm_ptr(&pxa2xx_spi_pm_ops), + .acpi_match_table = ACPI_PTR(pxa2xx_spi_acpi_match), + .of_match_table = of_match_ptr(pxa2xx_spi_of_match), + }, + .probe = pxa2xx_spi_probe, + .remove_new = pxa2xx_spi_remove, +}; + +static int __init pxa2xx_spi_init(void) +{ + return platform_driver_register(&driver); +} +subsys_initcall(pxa2xx_spi_init); + +static void __exit pxa2xx_spi_exit(void) +{ + platform_driver_unregister(&driver); +} +module_exit(pxa2xx_spi_exit); + +MODULE_SOFTDEP("pre: dw_dmac"); |