diff options
Diffstat (limited to 'drivers/spmi/hisi-spmi-controller.c')
-rw-r--r-- | drivers/spmi/hisi-spmi-controller.c | 366 |
1 files changed, 366 insertions, 0 deletions
diff --git a/drivers/spmi/hisi-spmi-controller.c b/drivers/spmi/hisi-spmi-controller.c new file mode 100644 index 0000000000..9cbd473487 --- /dev/null +++ b/drivers/spmi/hisi-spmi-controller.c @@ -0,0 +1,366 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/seq_file.h> +#include <linux/slab.h> +#include <linux/spmi.h> + +/* + * SPMI register addr + */ +#define SPMI_CHANNEL_OFFSET 0x0300 +#define SPMI_SLAVE_OFFSET 0x20 + +#define SPMI_APB_SPMI_CMD_BASE_ADDR 0x0100 + +#define SPMI_APB_SPMI_WDATA0_BASE_ADDR 0x0104 +#define SPMI_APB_SPMI_WDATA1_BASE_ADDR 0x0108 +#define SPMI_APB_SPMI_WDATA2_BASE_ADDR 0x010c +#define SPMI_APB_SPMI_WDATA3_BASE_ADDR 0x0110 + +#define SPMI_APB_SPMI_STATUS_BASE_ADDR 0x0200 + +#define SPMI_APB_SPMI_RDATA0_BASE_ADDR 0x0204 +#define SPMI_APB_SPMI_RDATA1_BASE_ADDR 0x0208 +#define SPMI_APB_SPMI_RDATA2_BASE_ADDR 0x020c +#define SPMI_APB_SPMI_RDATA3_BASE_ADDR 0x0210 + +#define SPMI_PER_DATAREG_BYTE 4 +/* + * SPMI cmd register + */ +#define SPMI_APB_SPMI_CMD_EN BIT(31) +#define SPMI_APB_SPMI_CMD_TYPE_OFFSET 24 +#define SPMI_APB_SPMI_CMD_LENGTH_OFFSET 20 +#define SPMI_APB_SPMI_CMD_SLAVEID_OFFSET 16 +#define SPMI_APB_SPMI_CMD_ADDR_OFFSET 0 + +/* Command Opcodes */ + +enum spmi_controller_cmd_op_code { + SPMI_CMD_REG_ZERO_WRITE = 0, + SPMI_CMD_REG_WRITE = 1, + SPMI_CMD_REG_READ = 2, + SPMI_CMD_EXT_REG_WRITE = 3, + SPMI_CMD_EXT_REG_READ = 4, + SPMI_CMD_EXT_REG_WRITE_L = 5, + SPMI_CMD_EXT_REG_READ_L = 6, + SPMI_CMD_REG_RESET = 7, + SPMI_CMD_REG_SLEEP = 8, + SPMI_CMD_REG_SHUTDOWN = 9, + SPMI_CMD_REG_WAKEUP = 10, +}; + +/* + * SPMI status register + */ +#define SPMI_APB_TRANS_DONE BIT(0) +#define SPMI_APB_TRANS_FAIL BIT(2) + +/* Command register fields */ +#define SPMI_CONTROLLER_CMD_MAX_BYTE_COUNT 16 + +/* Maximum number of support PMIC peripherals */ +#define SPMI_CONTROLLER_TIMEOUT_US 1000 +#define SPMI_CONTROLLER_MAX_TRANS_BYTES 16 + +struct spmi_controller_dev { + struct spmi_controller *controller; + struct device *dev; + void __iomem *base; + spinlock_t lock; + u32 channel; +}; + +static int spmi_controller_wait_for_done(struct device *dev, + struct spmi_controller_dev *ctrl_dev, + void __iomem *base, u8 sid, u16 addr) +{ + u32 timeout = SPMI_CONTROLLER_TIMEOUT_US; + u32 status, offset; + + offset = SPMI_APB_SPMI_STATUS_BASE_ADDR; + offset += SPMI_CHANNEL_OFFSET * ctrl_dev->channel + SPMI_SLAVE_OFFSET * sid; + + do { + status = readl(base + offset); + + if (status & SPMI_APB_TRANS_DONE) { + if (status & SPMI_APB_TRANS_FAIL) { + dev_err(dev, "%s: transaction failed (0x%x)\n", + __func__, status); + return -EIO; + } + dev_dbg(dev, "%s: status 0x%x\n", __func__, status); + return 0; + } + udelay(1); + } while (timeout--); + + dev_err(dev, "%s: timeout, status 0x%x\n", __func__, status); + return -ETIMEDOUT; +} + +static int spmi_read_cmd(struct spmi_controller *ctrl, + u8 opc, u8 slave_id, u16 slave_addr, u8 *__buf, size_t bc) +{ + struct spmi_controller_dev *spmi_controller = dev_get_drvdata(&ctrl->dev); + u32 chnl_ofst = SPMI_CHANNEL_OFFSET * spmi_controller->channel; + unsigned long flags; + u8 *buf = __buf; + u32 cmd, data; + int rc; + u8 op_code, i; + + if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) { + dev_err(&ctrl->dev, + "spmi_controller supports 1..%d bytes per trans, but:%zu requested\n", + SPMI_CONTROLLER_MAX_TRANS_BYTES, bc); + return -EINVAL; + } + + switch (opc) { + case SPMI_CMD_READ: + op_code = SPMI_CMD_REG_READ; + break; + case SPMI_CMD_EXT_READ: + op_code = SPMI_CMD_EXT_REG_READ; + break; + case SPMI_CMD_EXT_READL: + op_code = SPMI_CMD_EXT_REG_READ_L; + break; + default: + dev_err(&ctrl->dev, "invalid read cmd 0x%x\n", opc); + return -EINVAL; + } + + cmd = SPMI_APB_SPMI_CMD_EN | + (op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) | + ((bc - 1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) | + ((slave_id & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) | /* slvid */ + ((slave_addr & 0xffff) << SPMI_APB_SPMI_CMD_ADDR_OFFSET); /* slave_addr */ + + spin_lock_irqsave(&spmi_controller->lock, flags); + + writel(cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR); + + rc = spmi_controller_wait_for_done(&ctrl->dev, spmi_controller, + spmi_controller->base, slave_id, slave_addr); + if (rc) + goto done; + + for (i = 0; bc > i * SPMI_PER_DATAREG_BYTE; i++) { + data = readl(spmi_controller->base + chnl_ofst + + SPMI_SLAVE_OFFSET * slave_id + + SPMI_APB_SPMI_RDATA0_BASE_ADDR + + i * SPMI_PER_DATAREG_BYTE); + data = be32_to_cpu((__be32 __force)data); + if ((bc - i * SPMI_PER_DATAREG_BYTE) >> 2) { + memcpy(buf, &data, sizeof(data)); + buf += sizeof(data); + } else { + memcpy(buf, &data, bc % SPMI_PER_DATAREG_BYTE); + buf += (bc % SPMI_PER_DATAREG_BYTE); + } + } + +done: + spin_unlock_irqrestore(&spmi_controller->lock, flags); + if (rc) + dev_err(&ctrl->dev, + "spmi read wait timeout op:0x%x slave_id:%d slave_addr:0x%x bc:%zu\n", + opc, slave_id, slave_addr, bc + 1); + else + dev_dbg(&ctrl->dev, "%s: id:%d slave_addr:0x%x, read value: %*ph\n", + __func__, slave_id, slave_addr, (int)bc, __buf); + + return rc; +} + +static int spmi_write_cmd(struct spmi_controller *ctrl, + u8 opc, u8 slave_id, u16 slave_addr, const u8 *__buf, size_t bc) +{ + struct spmi_controller_dev *spmi_controller = dev_get_drvdata(&ctrl->dev); + u32 chnl_ofst = SPMI_CHANNEL_OFFSET * spmi_controller->channel; + const u8 *buf = __buf; + unsigned long flags; + u32 cmd, data; + int rc; + u8 op_code, i; + + if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) { + dev_err(&ctrl->dev, + "spmi_controller supports 1..%d bytes per trans, but:%zu requested\n", + SPMI_CONTROLLER_MAX_TRANS_BYTES, bc); + return -EINVAL; + } + + switch (opc) { + case SPMI_CMD_WRITE: + op_code = SPMI_CMD_REG_WRITE; + break; + case SPMI_CMD_EXT_WRITE: + op_code = SPMI_CMD_EXT_REG_WRITE; + break; + case SPMI_CMD_EXT_WRITEL: + op_code = SPMI_CMD_EXT_REG_WRITE_L; + break; + default: + dev_err(&ctrl->dev, "invalid write cmd 0x%x\n", opc); + return -EINVAL; + } + + cmd = SPMI_APB_SPMI_CMD_EN | + (op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) | + ((bc - 1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) | + ((slave_id & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) | + ((slave_addr & 0xffff) << SPMI_APB_SPMI_CMD_ADDR_OFFSET); + + /* Write data to FIFOs */ + spin_lock_irqsave(&spmi_controller->lock, flags); + + for (i = 0; bc > i * SPMI_PER_DATAREG_BYTE; i++) { + data = 0; + if ((bc - i * SPMI_PER_DATAREG_BYTE) >> 2) { + memcpy(&data, buf, sizeof(data)); + buf += sizeof(data); + } else { + memcpy(&data, buf, bc % SPMI_PER_DATAREG_BYTE); + buf += (bc % SPMI_PER_DATAREG_BYTE); + } + + writel((u32 __force)cpu_to_be32(data), + spmi_controller->base + chnl_ofst + + SPMI_APB_SPMI_WDATA0_BASE_ADDR + + SPMI_PER_DATAREG_BYTE * i); + } + + /* Start the transaction */ + writel(cmd, spmi_controller->base + chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR); + + rc = spmi_controller_wait_for_done(&ctrl->dev, spmi_controller, + spmi_controller->base, slave_id, + slave_addr); + spin_unlock_irqrestore(&spmi_controller->lock, flags); + + if (rc) + dev_err(&ctrl->dev, "spmi write wait timeout op:0x%x slave_id:%d slave_addr:0x%x bc:%zu\n", + opc, slave_id, slave_addr, bc); + else + dev_dbg(&ctrl->dev, "%s: id:%d slave_addr:0x%x, wrote value: %*ph\n", + __func__, slave_id, slave_addr, (int)bc, __buf); + + return rc; +} + +static int spmi_controller_probe(struct platform_device *pdev) +{ + struct spmi_controller_dev *spmi_controller; + struct spmi_controller *ctrl; + struct resource *iores; + int ret; + + ctrl = spmi_controller_alloc(&pdev->dev, sizeof(*spmi_controller)); + if (!ctrl) { + dev_err(&pdev->dev, "can not allocate spmi_controller data\n"); + return -ENOMEM; + } + spmi_controller = spmi_controller_get_drvdata(ctrl); + spmi_controller->controller = ctrl; + + iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!iores) { + dev_err(&pdev->dev, "can not get resource!\n"); + ret = -EINVAL; + goto err_put_controller; + } + + spmi_controller->base = devm_ioremap(&pdev->dev, iores->start, + resource_size(iores)); + if (!spmi_controller->base) { + dev_err(&pdev->dev, "can not remap base addr!\n"); + ret = -EADDRNOTAVAIL; + goto err_put_controller; + } + + ret = of_property_read_u32(pdev->dev.of_node, "hisilicon,spmi-channel", + &spmi_controller->channel); + if (ret) { + dev_err(&pdev->dev, "can not get channel\n"); + ret = -ENODEV; + goto err_put_controller; + } + + platform_set_drvdata(pdev, spmi_controller); + dev_set_drvdata(&ctrl->dev, spmi_controller); + + spin_lock_init(&spmi_controller->lock); + + ctrl->nr = spmi_controller->channel; + ctrl->dev.parent = pdev->dev.parent; + ctrl->dev.of_node = of_node_get(pdev->dev.of_node); + + /* Callbacks */ + ctrl->read_cmd = spmi_read_cmd; + ctrl->write_cmd = spmi_write_cmd; + + ret = spmi_controller_add(ctrl); + if (ret) { + dev_err(&pdev->dev, "spmi_controller_add failed with error %d!\n", ret); + goto err_put_controller; + } + + return 0; + +err_put_controller: + spmi_controller_put(ctrl); + return ret; +} + +static void spmi_del_controller(struct platform_device *pdev) +{ + struct spmi_controller *ctrl = platform_get_drvdata(pdev); + + spmi_controller_remove(ctrl); + spmi_controller_put(ctrl); +} + +static const struct of_device_id spmi_controller_match_table[] = { + { + .compatible = "hisilicon,kirin970-spmi-controller", + }, + {} +}; +MODULE_DEVICE_TABLE(of, spmi_controller_match_table); + +static struct platform_driver spmi_controller_driver = { + .probe = spmi_controller_probe, + .remove_new = spmi_del_controller, + .driver = { + .name = "hisi_spmi_controller", + .of_match_table = spmi_controller_match_table, + }, +}; + +static int __init spmi_controller_init(void) +{ + return platform_driver_register(&spmi_controller_driver); +} +postcore_initcall(spmi_controller_init); + +static void __exit spmi_controller_exit(void) +{ + platform_driver_unregister(&spmi_controller_driver); +} +module_exit(spmi_controller_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_VERSION("1.0"); +MODULE_ALIAS("platform:spmi_controller"); |