diff options
Diffstat (limited to 'drivers/staging/rtl8192u/r8192U_hw.h')
-rw-r--r-- | drivers/staging/rtl8192u/r8192U_hw.h | 246 |
1 files changed, 0 insertions, 246 deletions
diff --git a/drivers/staging/rtl8192u/r8192U_hw.h b/drivers/staging/rtl8192u/r8192U_hw.h deleted file mode 100644 index 217e777664..0000000000 --- a/drivers/staging/rtl8192u/r8192U_hw.h +++ /dev/null @@ -1,246 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * This is part of rtl8187 OpenSource driver. - * Copyright (C) Andrea Merello 2004-2005 <andrea.merello@gmail.com> - * - * Parts of this driver are based on the GPL part of the - * official Realtek driver. - * Parts of this driver are based on the rtl8180 driver skeleton - * from Patric Schenke & Andres Salomon. - * Parts of this driver are based on the Intel Pro Wireless - * 2100 GPL driver. - * - * We want to thank the Authors of those projects - * and the Ndiswrapper project Authors. - */ - -/* Mariusz Matuszek added full registers definition with Realtek's name */ - -/* this file contains register definitions for the rtl8187 MAC controller */ -#ifndef R8192_HW -#define R8192_HW - -#define RTL8187_REQT_READ 0xc0 -#define RTL8187_REQT_WRITE 0x40 -#define RTL8187_REQ_GET_REGS 0x05 -#define RTL8187_REQ_SET_REGS 0x05 - -#define MAX_TX_URB 5 -#define MAX_RX_URB 16 - -#define R8180_MAX_RETRY 255 - -#define RX_URB_SIZE 9100 - -#define RTL8190_EEPROM_ID 0x8129 -#define EEPROM_VID 0x02 -#define EEPROM_PID 0x04 -#define EEPROM_NODE_ADDRESS_BYTE_0 0x0C - -#define EEPROM_TX_POWER_DIFF 0x1F -#define EEPROM_THERMAL_METER 0x20 -#define EEPROM_PW_DIFF 0x21 //0x21 -#define EEPROM_CRYSTAL_CAP 0x22 //0x22 - -#define EEPROM_TX_PW_INDEX_CCK 0x23 //0x23 -#define EEPROM_TX_PW_INDEX_OFDM_24G 0x24 //0x24~0x26 -#define EEPROM_TX_PW_INDEX_CCK_V1 0x29 //0x29~0x2B -#define EEPROM_TX_PW_INDEX_OFDM_24G_V1 0x2C //0x2C~0x2E -#define EEPROM_TX_PW_INDEX_VER 0x27 //0x27 - -#define EEPROM_DEFAULT_THERNAL_METER 0x7 -#define EEPROM_DEFAULT_PW_DIFF 0x4 -#define EEPROM_DEFAULT_CRYSTAL_CAP 0x5 -#define EEPROM_DEFAULT_TX_POWER 0x1010 -#define EEPROM_CUSTOMER_ID 0x7B //0x7B:CustomerID -#define EEPROM_CHANNEL_PLAN 0x16 //0x7C - -#define EEPROM_CID_RUNTOP 0x2 -#define EEPROM_CID_DLINK 0x8 - -#define AC_PARAM_TXOP_LIMIT_OFFSET 16 -#define AC_PARAM_ECW_MAX_OFFSET 12 -#define AC_PARAM_ECW_MIN_OFFSET 8 -#define AC_PARAM_AIFS_OFFSET 0 - -//#endif -enum _RTL8192Usb_HW { - MAC0 = 0x000, - MAC4 = 0x004, - -#define BB_GLOBAL_RESET_BIT 0x1 - BB_GLOBAL_RESET = 0x020, // BasebandGlobal Reset Register - BSSIDR = 0x02E, // BSSID Register - CMDR = 0x037, // Command register -#define CR_RE 0x08 -#define CR_TE 0x04 - SIFS = 0x03E, // SIFS register - -#define TCR_MXDMA_2048 7 -#define TCR_LRL_OFFSET 0 -#define TCR_SRL_OFFSET 8 -#define TCR_MXDMA_OFFSET 21 -#define TCR_SAT BIT(24) // Enable Rate depedent ack timeout timer - RCR = 0x044, // Receive Configuration Register -#define MAC_FILTER_MASK (BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(5) | \ - BIT(12) | BIT(18) | BIT(19) | BIT(20) | BIT(21) | \ - BIT(22) | BIT(23)) -#define RX_FIFO_THRESHOLD_MASK (BIT(13) | BIT(14) | BIT(15)) -#define RX_FIFO_THRESHOLD_SHIFT 13 -#define RX_FIFO_THRESHOLD_NONE 7 -#define MAX_RX_DMA_MASK (BIT(8) | BIT(9) | BIT(10)) -#define RCR_MXDMA_OFFSET 8 -#define RCR_FIFO_OFFSET 13 -#define RCR_ONLYERLPKT BIT(31) // Early Receiving based on Packet Size. -#define RCR_CBSSID BIT(23) // Accept BSSID match packet -#define RCR_APWRMGT BIT(22) // Accept power management packet -#define RCR_AMF BIT(20) // Accept management type frame -#define RCR_ACF BIT(19) // Accept control type frame -#define RCR_ADF BIT(18) // Accept data type frame -#define RCR_AICV BIT(12) // Accept ICV error packet -#define RCR_ACRC32 BIT(5) // Accept CRC32 error packet -#define RCR_AB BIT(3) // Accept broadcast packet -#define RCR_AM BIT(2) // Accept multicast packet -#define RCR_APM BIT(1) // Accept physical match packet -#define RCR_AAP BIT(0) // Accept all unicast packet - SLOT_TIME = 0x049, // Slot Time Register - ACK_TIMEOUT = 0x04c, // Ack Timeout Register - EDCAPARA_BE = 0x050, // EDCA Parameter of AC BE - EDCAPARA_BK = 0x054, // EDCA Parameter of AC BK - EDCAPARA_VO = 0x058, // EDCA Parameter of AC VO - EDCAPARA_VI = 0x05C, // EDCA Parameter of AC VI - BCN_TCFG = 0x062, // Beacon Time Configuration -#define BCN_TCFG_CW_SHIFT 8 -#define BCN_TCFG_IFS 0 - BCN_INTERVAL = 0x070, // Beacon Interval (TU) - ATIMWND = 0x072, // ATIM Window Size (TU) - BCN_DRV_EARLY_INT = 0x074, // Driver Early Interrupt Time (TU). Time to send interrupt to notify to change beacon content before TBTT - BCN_DMATIME = 0x076, // Beacon DMA and ATIM interrupt time (US). Indicates the time before TBTT to perform beacon queue DMA - BCN_ERR_THRESH = 0x078, // Beacon Error Threshold - RWCAM = 0x0A0, //IN 8190 Data Sheet is called CAMcmd - WCAMI = 0x0A4, // Software write CAM input content - SECR = 0x0B0, //Security Configuration Register -#define SCR_TxUseDK BIT(0) //Force Tx Use Default Key -#define SCR_RxUseDK BIT(1) //Force Rx Use Default Key -#define SCR_TxEncEnable BIT(2) //Enable Tx Encryption -#define SCR_RxDecEnable BIT(3) //Enable Rx Decryption -#define SCR_SKByA2 BIT(4) //Search kEY BY A2 -#define SCR_NoSKMC BIT(5) //No Key Search for Multicast - -//---------------------------------------------------------------------------- -// 8190 CPU General Register (offset 0x100, 4 byte) -//---------------------------------------------------------------------------- -#define CPU_CCK_LOOPBACK 0x00030000 -#define CPU_GEN_SYSTEM_RESET 0x00000001 -#define CPU_GEN_FIRMWARE_RESET 0x00000008 -#define CPU_GEN_BOOT_RDY 0x00000010 -#define CPU_GEN_FIRM_RDY 0x00000020 -#define CPU_GEN_PUT_CODE_OK 0x00000080 -#define CPU_GEN_BB_RST 0x00000100 -#define CPU_GEN_PWR_STB_CPU 0x00000004 -#define CPU_GEN_NO_LOOPBACK_MSK 0xFFF8FFFF // Set bit18,17,16 to 0. Set bit19 -#define CPU_GEN_NO_LOOPBACK_SET 0x00080000 // Set BIT19 to 1 - CPU_GEN = 0x100, // CPU Reset Register - - AcmHwCtrl = 0x171, // ACM Hardware Control Register -//---------------------------------------------------------------------------- -//// -//// 8190 AcmHwCtrl bits (offset 0x171, 1 byte) -////---------------------------------------------------------------------------- -// -#define AcmHw_BeqEn BIT(1) - - RQPN1 = 0x180, // Reserved Queue Page Number , Vo Vi, Be, Bk - RQPN2 = 0x184, // Reserved Queue Page Number, HCCA, Cmd, Mgnt, High - RQPN3 = 0x188, // Reserved Queue Page Number, Bcn, Public, - QPNR = 0x1D0, //0x1F0, // Queue Packet Number report per TID - -#define BW_OPMODE_5G BIT(1) -#define BW_OPMODE_20MHZ BIT(2) - BW_OPMODE = 0x300, // Bandwidth operation mode - MSR = 0x303, // Media Status register -#define MSR_LINK_MASK (BIT(0) | BIT(1)) -#define MSR_LINK_MANAGED 2 -#define MSR_LINK_NONE 0 -#define MSR_LINK_SHIFT 0 -#define MSR_LINK_ADHOC 1 -#define MSR_LINK_MASTER 3 - RETRY_LIMIT = 0x304, // Retry Limit [15:8]-short, [7:0]-long -#define RETRY_LIMIT_SHORT_SHIFT 8 -#define RETRY_LIMIT_LONG_SHIFT 0 - RRSR = 0x310, // Response Rate Set -#define RRSR_1M BIT(0) -#define RRSR_2M BIT(1) -#define RRSR_5_5M BIT(2) -#define RRSR_11M BIT(3) -#define RRSR_6M BIT(4) -#define RRSR_9M BIT(5) -#define RRSR_12M BIT(6) -#define RRSR_18M BIT(7) -#define RRSR_24M BIT(8) -#define RRSR_36M BIT(9) -#define RRSR_48M BIT(10) -#define RRSR_54M BIT(11) -#define BRSR_AckShortPmb BIT(23) // CCK ACK: use Short Preamble or not. - UFWP = 0x318, - RATR0 = 0x320, // Rate Adaptive Table register1 - DRIVER_RSSI = 0x32c, // Driver tell Firmware current RSSI -//---------------------------------------------------------------------------- -// 8190 Rate Adaptive Table Register (offset 0x320, 4 byte) -//---------------------------------------------------------------------------- -//CCK -#define RATR_1M 0x00000001 -#define RATR_2M 0x00000002 -#define RATR_55M 0x00000004 -#define RATR_11M 0x00000008 -//OFDM -#define RATR_6M 0x00000010 -#define RATR_9M 0x00000020 -#define RATR_12M 0x00000040 -#define RATR_18M 0x00000080 -#define RATR_24M 0x00000100 -#define RATR_36M 0x00000200 -#define RATR_48M 0x00000400 -#define RATR_54M 0x00000800 -//MCS 1 Spatial Stream -#define RATR_MCS0 0x00001000 -#define RATR_MCS1 0x00002000 -#define RATR_MCS2 0x00004000 -#define RATR_MCS3 0x00008000 -#define RATR_MCS4 0x00010000 -#define RATR_MCS5 0x00020000 -#define RATR_MCS6 0x00040000 -#define RATR_MCS7 0x00080000 -//MCS 2 Spatial Stream -#define RATR_MCS8 0x00100000 -#define RATR_MCS9 0x00200000 -#define RATR_MCS10 0x00400000 -#define RATR_MCS11 0x00800000 -#define RATR_MCS12 0x01000000 -#define RATR_MCS13 0x02000000 -#define RATR_MCS14 0x04000000 -#define RATR_MCS15 0x08000000 -// ALL CCK Rate -#define RATE_ALL_CCK (RATR_1M | RATR_2M | RATR_55M | RATR_11M) -#define RATE_ALL_OFDM_AG (RATR_6M | RATR_9M | RATR_12M | RATR_18M |\ - RATR_24M | RATR_36M | RATR_48M | RATR_54M) -#define RATE_ALL_OFDM_1SS (RATR_MCS0 | RATR_MCS1 | RATR_MCS2 | RATR_MCS3 |\ - RATR_MCS4 | RATR_MCS5 | RATR_MCS6 | RATR_MCS7) -#define RATE_ALL_OFDM_2SS (RATR_MCS8 | RATR_MCS9 | RATR_MCS10 | RATR_MCS11 |\ - RATR_MCS12 | RATR_MCS13 | RATR_MCS14 | RATR_MCS15) - EPROM_CMD = 0xfe58, -#define Cmd9346CR_9356SEL BIT(4) -#define EPROM_CMD_OPERATING_MODE_SHIFT 6 -#define EPROM_CMD_NORMAL 0 -#define EPROM_CMD_PROGRAM 2 -#define EPROM_CS_BIT BIT(3) -#define EPROM_CK_BIT BIT(2) -#define EPROM_W_BIT BIT(1) -#define EPROM_R_BIT BIT(0) -}; - -//---------------------------------------------------------------------------- -// 818xB AnaParm & AnaParm2 Register -//---------------------------------------------------------------------------- -#define GPI 0x108 -#endif |