diff options
Diffstat (limited to 'drivers/thermal/qcom/Kconfig')
| -rw-r--r-- | drivers/thermal/qcom/Kconfig | 43 |
1 files changed, 43 insertions, 0 deletions
diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig new file mode 100644 index 0000000000..2c7f3f9a26 --- /dev/null +++ b/drivers/thermal/qcom/Kconfig @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0-only +config QCOM_TSENS + tristate "Qualcomm TSENS Temperature Alarm" + depends on NVMEM_QCOM_QFPROM + depends on ARCH_QCOM || COMPILE_TEST + help + This enables the thermal sysfs driver for the TSENS device. It shows + up in Sysfs as a thermal zone with multiple trip points. Disabling the + thermal zone device via the mode file results in disabling the sensor. + Also able to set threshold temperature for both hot and cold and update + when a threshold is reached. + +config QCOM_SPMI_ADC_TM5 + tristate "Qualcomm SPMI PMIC Thermal Monitor ADC5" + depends on OF && SPMI && IIO + select REGMAP_SPMI + select QCOM_VADC_COMMON + help + This enables the thermal driver for the ADC thermal monitoring + device. It shows up as a thermal zone with multiple trip points. + Thermal client sets threshold temperature for both warm and cool and + gets updated when a threshold is reached. + +config QCOM_SPMI_TEMP_ALARM + tristate "Qualcomm SPMI PMIC Temperature Alarm" + depends on OF && SPMI && IIO + select REGMAP_SPMI + help + This enables a thermal sysfs driver for Qualcomm plug-and-play (QPNP) + PMIC devices. It shows up in sysfs as a thermal sensor with multiple + trip points. The temperature reported by the thermal sensor reflects the + real time die temperature if an ADC is present or an estimate of the + temperature based upon the over temperature stage value. + +config QCOM_LMH + tristate "Qualcomm Limits Management Hardware" + depends on ARCH_QCOM && QCOM_SCM + help + This enables initialization of Qualcomm limits management + hardware(LMh). LMh allows for hardware-enforced mitigation for cpus based on + input from temperature and current sensors. On many newer Qualcomm SoCs + LMh is configured in the firmware and this feature need not be enabled. + However, on certain SoCs like sdm845 LMh has to be configured from kernel. |