diff options
Diffstat (limited to 'drivers/thermal/qcom/tsens-8960.c')
| -rw-r--r-- | drivers/thermal/qcom/tsens-8960.c | 285 |
1 files changed, 285 insertions, 0 deletions
diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c new file mode 100644 index 0000000000..4585904fb3 --- /dev/null +++ b/drivers/thermal/qcom/tsens-8960.c @@ -0,0 +1,285 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + */ + +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/bitops.h> +#include <linux/regmap.h> +#include <linux/thermal.h> +#include "tsens.h" + +#define CONFIG_ADDR 0x3640 +#define CONFIG_ADDR_8660 0x3620 +/* CONFIG_ADDR bitmasks */ +#define CONFIG 0x9b +#define CONFIG_MASK 0xf +#define CONFIG_8660 1 +#define CONFIG_SHIFT_8660 28 +#define CONFIG_MASK_8660 (3 << CONFIG_SHIFT_8660) + +#define CNTL_ADDR 0x3620 +/* CNTL_ADDR bitmasks */ +#define EN BIT(0) +#define SW_RST BIT(1) + +#define MEASURE_PERIOD BIT(18) +#define SLP_CLK_ENA BIT(26) +#define SLP_CLK_ENA_8660 BIT(24) +#define SENSOR0_SHIFT 3 + +#define THRESHOLD_ADDR 0x3624 + +#define INT_STATUS_ADDR 0x363c + +#define S0_STATUS_OFF 0x3628 +#define S1_STATUS_OFF 0x362c +#define S2_STATUS_OFF 0x3630 +#define S3_STATUS_OFF 0x3634 +#define S4_STATUS_OFF 0x3638 +#define S5_STATUS_OFF 0x3664 /* Sensors 5-10 found on apq8064/msm8960 */ +#define S6_STATUS_OFF 0x3668 +#define S7_STATUS_OFF 0x366c +#define S8_STATUS_OFF 0x3670 +#define S9_STATUS_OFF 0x3674 +#define S10_STATUS_OFF 0x3678 + +/* Original slope - 350 to compensate mC to C inaccuracy */ +static u32 tsens_msm8960_slope[] = { + 826, 826, 804, 826, + 761, 782, 782, 849, + 782, 849, 782 + }; + +static int suspend_8960(struct tsens_priv *priv) +{ + int ret; + unsigned int mask; + struct regmap *map = priv->tm_map; + + ret = regmap_read(map, THRESHOLD_ADDR, &priv->ctx.threshold); + if (ret) + return ret; + + ret = regmap_read(map, CNTL_ADDR, &priv->ctx.control); + if (ret) + return ret; + + if (priv->num_sensors > 1) + mask = SLP_CLK_ENA | EN; + else + mask = SLP_CLK_ENA_8660 | EN; + + ret = regmap_update_bits(map, CNTL_ADDR, mask, 0); + if (ret) + return ret; + + return 0; +} + +static int resume_8960(struct tsens_priv *priv) +{ + int ret; + struct regmap *map = priv->tm_map; + + ret = regmap_update_bits(map, CNTL_ADDR, SW_RST, SW_RST); + if (ret) + return ret; + + /* + * Separate CONFIG restore is not needed only for 8660 as + * config is part of CTRL Addr and its restored as such + */ + if (priv->num_sensors > 1) { + ret = regmap_update_bits(map, CONFIG_ADDR, CONFIG_MASK, CONFIG); + if (ret) + return ret; + } + + ret = regmap_write(map, THRESHOLD_ADDR, priv->ctx.threshold); + if (ret) + return ret; + + ret = regmap_write(map, CNTL_ADDR, priv->ctx.control); + if (ret) + return ret; + + return 0; +} + +static int enable_8960(struct tsens_priv *priv, int id) +{ + int ret; + u32 reg, mask = BIT(id); + + ret = regmap_read(priv->tm_map, CNTL_ADDR, ®); + if (ret) + return ret; + + /* HARDWARE BUG: + * On platforms with more than 6 sensors, all remaining sensors + * must be enabled together, otherwise undefined results are expected. + * (Sensor 6-7 disabled, Sensor 3 disabled...) In the original driver, + * all the sensors are enabled in one step hence this bug is not + * triggered. + */ + if (id > 5) + mask = GENMASK(10, 6); + + mask <<= SENSOR0_SHIFT; + + /* Sensors already enabled. Skip. */ + if ((reg & mask) == mask) + return 0; + + ret = regmap_write(priv->tm_map, CNTL_ADDR, reg | SW_RST); + if (ret) + return ret; + + reg |= MEASURE_PERIOD; + + if (priv->num_sensors > 1) + reg |= mask | SLP_CLK_ENA | EN; + else + reg |= mask | SLP_CLK_ENA_8660 | EN; + + ret = regmap_write(priv->tm_map, CNTL_ADDR, reg); + if (ret) + return ret; + + return 0; +} + +static void disable_8960(struct tsens_priv *priv) +{ + int ret; + u32 reg_cntl; + u32 mask; + + mask = GENMASK(priv->num_sensors - 1, 0); + mask <<= SENSOR0_SHIFT; + mask |= EN; + + ret = regmap_read(priv->tm_map, CNTL_ADDR, ®_cntl); + if (ret) + return; + + reg_cntl &= ~mask; + + if (priv->num_sensors > 1) + reg_cntl &= ~SLP_CLK_ENA; + else + reg_cntl &= ~SLP_CLK_ENA_8660; + + regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl); +} + +static int calibrate_8960(struct tsens_priv *priv) +{ + int i; + char *data; + u32 p1[11]; + + data = qfprom_read(priv->dev, "calib"); + if (IS_ERR(data)) + data = qfprom_read(priv->dev, "calib_backup"); + if (IS_ERR(data)) + return PTR_ERR(data); + + for (i = 0; i < priv->num_sensors; i++) { + p1[i] = data[i]; + priv->sensor[i].slope = tsens_msm8960_slope[i]; + } + + compute_intercept_slope(priv, p1, NULL, ONE_PT_CALIB); + + kfree(data); + + return 0; +} + +static const struct reg_field tsens_8960_regfields[MAX_REGFIELDS] = { + /* ----- SROT ------ */ + /* No VERSION information */ + + /* CNTL */ + [TSENS_EN] = REG_FIELD(CNTL_ADDR, 0, 0), + [TSENS_SW_RST] = REG_FIELD(CNTL_ADDR, 1, 1), + /* 8960 has 5 sensors, 8660 has 11, we only handle 5 */ + [SENSOR_EN] = REG_FIELD(CNTL_ADDR, 3, 7), + + /* ----- TM ------ */ + /* INTERRUPT ENABLE */ + /* NO INTERRUPT ENABLE */ + + /* Single UPPER/LOWER TEMPERATURE THRESHOLD for all sensors */ + [LOW_THRESH_0] = REG_FIELD(THRESHOLD_ADDR, 0, 7), + [UP_THRESH_0] = REG_FIELD(THRESHOLD_ADDR, 8, 15), + /* MIN_THRESH_0 and MAX_THRESH_0 are not present in the regfield + * Recycle CRIT_THRESH_0 and 1 to set the required regs to hardcoded temp + * MIN_THRESH_0 -> CRIT_THRESH_1 + * MAX_THRESH_0 -> CRIT_THRESH_0 + */ + [CRIT_THRESH_1] = REG_FIELD(THRESHOLD_ADDR, 16, 23), + [CRIT_THRESH_0] = REG_FIELD(THRESHOLD_ADDR, 24, 31), + + /* UPPER/LOWER INTERRUPT [CLEAR/STATUS] */ + /* 1 == clear, 0 == normal operation */ + [LOW_INT_CLEAR_0] = REG_FIELD(CNTL_ADDR, 9, 9), + [UP_INT_CLEAR_0] = REG_FIELD(CNTL_ADDR, 10, 10), + + /* NO CRITICAL INTERRUPT SUPPORT on 8960 */ + + /* Sn_STATUS */ + [LAST_TEMP_0] = REG_FIELD(S0_STATUS_OFF, 0, 7), + [LAST_TEMP_1] = REG_FIELD(S1_STATUS_OFF, 0, 7), + [LAST_TEMP_2] = REG_FIELD(S2_STATUS_OFF, 0, 7), + [LAST_TEMP_3] = REG_FIELD(S3_STATUS_OFF, 0, 7), + [LAST_TEMP_4] = REG_FIELD(S4_STATUS_OFF, 0, 7), + [LAST_TEMP_5] = REG_FIELD(S5_STATUS_OFF, 0, 7), + [LAST_TEMP_6] = REG_FIELD(S6_STATUS_OFF, 0, 7), + [LAST_TEMP_7] = REG_FIELD(S7_STATUS_OFF, 0, 7), + [LAST_TEMP_8] = REG_FIELD(S8_STATUS_OFF, 0, 7), + [LAST_TEMP_9] = REG_FIELD(S9_STATUS_OFF, 0, 7), + [LAST_TEMP_10] = REG_FIELD(S10_STATUS_OFF, 0, 7), + + /* No VALID field on 8960 */ + /* TSENS_INT_STATUS bits: 1 == threshold violated */ + [MIN_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 0, 0), + [LOWER_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 1, 1), + [UPPER_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 2, 2), + /* No CRITICAL field on 8960 */ + [MAX_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 3, 3), + + /* TRDY: 1=ready, 0=in progress */ + [TRDY] = REG_FIELD(INT_STATUS_ADDR, 7, 7), +}; + +static const struct tsens_ops ops_8960 = { + .init = init_common, + .calibrate = calibrate_8960, + .get_temp = get_temp_common, + .enable = enable_8960, + .disable = disable_8960, + .suspend = suspend_8960, + .resume = resume_8960, +}; + +static struct tsens_features tsens_8960_feat = { + .ver_major = VER_0, + .crit_int = 0, + .combo_int = 0, + .adc = 1, + .srot_split = 0, + .max_sensors = 11, + .trip_min_temp = -40000, + .trip_max_temp = 120000, +}; + +struct tsens_plat_data data_8960 = { + .num_sensors = 11, + .ops = &ops_8960, + .feat = &tsens_8960_feat, + .fields = tsens_8960_regfields, +}; |