diff options
Diffstat (limited to 'drivers/tty/serial/max310x.c')
| -rw-r--r-- | drivers/tty/serial/max310x.c | 1702 |
1 files changed, 1702 insertions, 0 deletions
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c new file mode 100644 index 0000000000..db3204d2a3 --- /dev/null +++ b/drivers/tty/serial/max310x.c @@ -0,0 +1,1702 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Maxim (Dallas) MAX3107/8/9, MAX14830 serial driver + * + * Copyright (C) 2012-2016 Alexander Shiyan <shc_work@mail.ru> + * + * Based on max3100.c, by Christian Pellegrin <chripell@evolware.org> + * Based on max3110.c, by Feng Tang <feng.tang@intel.com> + * Based on max3107.c, by Aavamobile + */ + +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/gpio/driver.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/property.h> +#include <linux/regmap.h> +#include <linux/serial_core.h> +#include <linux/serial.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/spi/spi.h> +#include <linux/uaccess.h> + +#define MAX310X_NAME "max310x" +#define MAX310X_MAJOR 204 +#define MAX310X_MINOR 209 +#define MAX310X_UART_NRMAX 16 + +/* MAX310X register definitions */ +#define MAX310X_RHR_REG (0x00) /* RX FIFO */ +#define MAX310X_THR_REG (0x00) /* TX FIFO */ +#define MAX310X_IRQEN_REG (0x01) /* IRQ enable */ +#define MAX310X_IRQSTS_REG (0x02) /* IRQ status */ +#define MAX310X_LSR_IRQEN_REG (0x03) /* LSR IRQ enable */ +#define MAX310X_LSR_IRQSTS_REG (0x04) /* LSR IRQ status */ +#define MAX310X_REG_05 (0x05) +#define MAX310X_SPCHR_IRQEN_REG MAX310X_REG_05 /* Special char IRQ en */ +#define MAX310X_SPCHR_IRQSTS_REG (0x06) /* Special char IRQ status */ +#define MAX310X_STS_IRQEN_REG (0x07) /* Status IRQ enable */ +#define MAX310X_STS_IRQSTS_REG (0x08) /* Status IRQ status */ +#define MAX310X_MODE1_REG (0x09) /* MODE1 */ +#define MAX310X_MODE2_REG (0x0a) /* MODE2 */ +#define MAX310X_LCR_REG (0x0b) /* LCR */ +#define MAX310X_RXTO_REG (0x0c) /* RX timeout */ +#define MAX310X_HDPIXDELAY_REG (0x0d) /* Auto transceiver delays */ +#define MAX310X_IRDA_REG (0x0e) /* IRDA settings */ +#define MAX310X_FLOWLVL_REG (0x0f) /* Flow control levels */ +#define MAX310X_FIFOTRIGLVL_REG (0x10) /* FIFO IRQ trigger levels */ +#define MAX310X_TXFIFOLVL_REG (0x11) /* TX FIFO level */ +#define MAX310X_RXFIFOLVL_REG (0x12) /* RX FIFO level */ +#define MAX310X_FLOWCTRL_REG (0x13) /* Flow control */ +#define MAX310X_XON1_REG (0x14) /* XON1 character */ +#define MAX310X_XON2_REG (0x15) /* XON2 character */ +#define MAX310X_XOFF1_REG (0x16) /* XOFF1 character */ +#define MAX310X_XOFF2_REG (0x17) /* XOFF2 character */ +#define MAX310X_GPIOCFG_REG (0x18) /* GPIO config */ +#define MAX310X_GPIODATA_REG (0x19) /* GPIO data */ +#define MAX310X_PLLCFG_REG (0x1a) /* PLL config */ +#define MAX310X_BRGCFG_REG (0x1b) /* Baud rate generator conf */ +#define MAX310X_BRGDIVLSB_REG (0x1c) /* Baud rate divisor LSB */ +#define MAX310X_BRGDIVMSB_REG (0x1d) /* Baud rate divisor MSB */ +#define MAX310X_CLKSRC_REG (0x1e) /* Clock source */ +#define MAX310X_REG_1F (0x1f) + +#define MAX310X_REVID_REG MAX310X_REG_1F /* Revision ID */ + +#define MAX310X_GLOBALIRQ_REG MAX310X_REG_1F /* Global IRQ (RO) */ +#define MAX310X_GLOBALCMD_REG MAX310X_REG_1F /* Global Command (WO) */ + +/* Extended registers */ +#define MAX310X_SPI_REVID_EXTREG MAX310X_REG_05 /* Revision ID */ +#define MAX310X_I2C_REVID_EXTREG (0x25) /* Revision ID */ + +/* IRQ register bits */ +#define MAX310X_IRQ_LSR_BIT (1 << 0) /* LSR interrupt */ +#define MAX310X_IRQ_SPCHR_BIT (1 << 1) /* Special char interrupt */ +#define MAX310X_IRQ_STS_BIT (1 << 2) /* Status interrupt */ +#define MAX310X_IRQ_RXFIFO_BIT (1 << 3) /* RX FIFO interrupt */ +#define MAX310X_IRQ_TXFIFO_BIT (1 << 4) /* TX FIFO interrupt */ +#define MAX310X_IRQ_TXEMPTY_BIT (1 << 5) /* TX FIFO empty interrupt */ +#define MAX310X_IRQ_RXEMPTY_BIT (1 << 6) /* RX FIFO empty interrupt */ +#define MAX310X_IRQ_CTS_BIT (1 << 7) /* CTS interrupt */ + +/* LSR register bits */ +#define MAX310X_LSR_RXTO_BIT (1 << 0) /* RX timeout */ +#define MAX310X_LSR_RXOVR_BIT (1 << 1) /* RX overrun */ +#define MAX310X_LSR_RXPAR_BIT (1 << 2) /* RX parity error */ +#define MAX310X_LSR_FRERR_BIT (1 << 3) /* Frame error */ +#define MAX310X_LSR_RXBRK_BIT (1 << 4) /* RX break */ +#define MAX310X_LSR_RXNOISE_BIT (1 << 5) /* RX noise */ +#define MAX310X_LSR_CTS_BIT (1 << 7) /* CTS pin state */ + +/* Special character register bits */ +#define MAX310X_SPCHR_XON1_BIT (1 << 0) /* XON1 character */ +#define MAX310X_SPCHR_XON2_BIT (1 << 1) /* XON2 character */ +#define MAX310X_SPCHR_XOFF1_BIT (1 << 2) /* XOFF1 character */ +#define MAX310X_SPCHR_XOFF2_BIT (1 << 3) /* XOFF2 character */ +#define MAX310X_SPCHR_BREAK_BIT (1 << 4) /* RX break */ +#define MAX310X_SPCHR_MULTIDROP_BIT (1 << 5) /* 9-bit multidrop addr char */ + +/* Status register bits */ +#define MAX310X_STS_GPIO0_BIT (1 << 0) /* GPIO 0 interrupt */ +#define MAX310X_STS_GPIO1_BIT (1 << 1) /* GPIO 1 interrupt */ +#define MAX310X_STS_GPIO2_BIT (1 << 2) /* GPIO 2 interrupt */ +#define MAX310X_STS_GPIO3_BIT (1 << 3) /* GPIO 3 interrupt */ +#define MAX310X_STS_CLKREADY_BIT (1 << 5) /* Clock ready */ +#define MAX310X_STS_SLEEP_BIT (1 << 6) /* Sleep interrupt */ + +/* MODE1 register bits */ +#define MAX310X_MODE1_RXDIS_BIT (1 << 0) /* RX disable */ +#define MAX310X_MODE1_TXDIS_BIT (1 << 1) /* TX disable */ +#define MAX310X_MODE1_TXHIZ_BIT (1 << 2) /* TX pin three-state */ +#define MAX310X_MODE1_RTSHIZ_BIT (1 << 3) /* RTS pin three-state */ +#define MAX310X_MODE1_TRNSCVCTRL_BIT (1 << 4) /* Transceiver ctrl enable */ +#define MAX310X_MODE1_FORCESLEEP_BIT (1 << 5) /* Force sleep mode */ +#define MAX310X_MODE1_AUTOSLEEP_BIT (1 << 6) /* Auto sleep enable */ +#define MAX310X_MODE1_IRQSEL_BIT (1 << 7) /* IRQ pin enable */ + +/* MODE2 register bits */ +#define MAX310X_MODE2_RST_BIT (1 << 0) /* Chip reset */ +#define MAX310X_MODE2_FIFORST_BIT (1 << 1) /* FIFO reset */ +#define MAX310X_MODE2_RXTRIGINV_BIT (1 << 2) /* RX FIFO INT invert */ +#define MAX310X_MODE2_RXEMPTINV_BIT (1 << 3) /* RX FIFO empty INT invert */ +#define MAX310X_MODE2_SPCHR_BIT (1 << 4) /* Special chr detect enable */ +#define MAX310X_MODE2_LOOPBACK_BIT (1 << 5) /* Internal loopback enable */ +#define MAX310X_MODE2_MULTIDROP_BIT (1 << 6) /* 9-bit multidrop enable */ +#define MAX310X_MODE2_ECHOSUPR_BIT (1 << 7) /* ECHO suppression enable */ + +/* LCR register bits */ +#define MAX310X_LCR_LENGTH0_BIT (1 << 0) /* Word length bit 0 */ +#define MAX310X_LCR_LENGTH1_BIT (1 << 1) /* Word length bit 1 + * + * Word length bits table: + * 00 -> 5 bit words + * 01 -> 6 bit words + * 10 -> 7 bit words + * 11 -> 8 bit words + */ +#define MAX310X_LCR_STOPLEN_BIT (1 << 2) /* STOP length bit + * + * STOP length bit table: + * 0 -> 1 stop bit + * 1 -> 1-1.5 stop bits if + * word length is 5, + * 2 stop bits otherwise + */ +#define MAX310X_LCR_PARITY_BIT (1 << 3) /* Parity bit enable */ +#define MAX310X_LCR_EVENPARITY_BIT (1 << 4) /* Even parity bit enable */ +#define MAX310X_LCR_FORCEPARITY_BIT (1 << 5) /* 9-bit multidrop parity */ +#define MAX310X_LCR_TXBREAK_BIT (1 << 6) /* TX break enable */ +#define MAX310X_LCR_RTS_BIT (1 << 7) /* RTS pin control */ + +/* IRDA register bits */ +#define MAX310X_IRDA_IRDAEN_BIT (1 << 0) /* IRDA mode enable */ +#define MAX310X_IRDA_SIR_BIT (1 << 1) /* SIR mode enable */ + +/* Flow control trigger level register masks */ +#define MAX310X_FLOWLVL_HALT_MASK (0x000f) /* Flow control halt level */ +#define MAX310X_FLOWLVL_RES_MASK (0x00f0) /* Flow control resume level */ +#define MAX310X_FLOWLVL_HALT(words) ((words / 8) & 0x0f) +#define MAX310X_FLOWLVL_RES(words) (((words / 8) & 0x0f) << 4) + +/* FIFO interrupt trigger level register masks */ +#define MAX310X_FIFOTRIGLVL_TX_MASK (0x0f) /* TX FIFO trigger level */ +#define MAX310X_FIFOTRIGLVL_RX_MASK (0xf0) /* RX FIFO trigger level */ +#define MAX310X_FIFOTRIGLVL_TX(words) ((words / 8) & 0x0f) +#define MAX310X_FIFOTRIGLVL_RX(words) (((words / 8) & 0x0f) << 4) + +/* Flow control register bits */ +#define MAX310X_FLOWCTRL_AUTORTS_BIT (1 << 0) /* Auto RTS flow ctrl enable */ +#define MAX310X_FLOWCTRL_AUTOCTS_BIT (1 << 1) /* Auto CTS flow ctrl enable */ +#define MAX310X_FLOWCTRL_GPIADDR_BIT (1 << 2) /* Enables that GPIO inputs + * are used in conjunction with + * XOFF2 for definition of + * special character */ +#define MAX310X_FLOWCTRL_SWFLOWEN_BIT (1 << 3) /* Auto SW flow ctrl enable */ +#define MAX310X_FLOWCTRL_SWFLOW0_BIT (1 << 4) /* SWFLOW bit 0 */ +#define MAX310X_FLOWCTRL_SWFLOW1_BIT (1 << 5) /* SWFLOW bit 1 + * + * SWFLOW bits 1 & 0 table: + * 00 -> no transmitter flow + * control + * 01 -> receiver compares + * XON2 and XOFF2 + * and controls + * transmitter + * 10 -> receiver compares + * XON1 and XOFF1 + * and controls + * transmitter + * 11 -> receiver compares + * XON1, XON2, XOFF1 and + * XOFF2 and controls + * transmitter + */ +#define MAX310X_FLOWCTRL_SWFLOW2_BIT (1 << 6) /* SWFLOW bit 2 */ +#define MAX310X_FLOWCTRL_SWFLOW3_BIT (1 << 7) /* SWFLOW bit 3 + * + * SWFLOW bits 3 & 2 table: + * 00 -> no received flow + * control + * 01 -> transmitter generates + * XON2 and XOFF2 + * 10 -> transmitter generates + * XON1 and XOFF1 + * 11 -> transmitter generates + * XON1, XON2, XOFF1 and + * XOFF2 + */ + +/* PLL configuration register masks */ +#define MAX310X_PLLCFG_PREDIV_MASK (0x3f) /* PLL predivision value */ +#define MAX310X_PLLCFG_PLLFACTOR_MASK (0xc0) /* PLL multiplication factor */ + +/* Baud rate generator configuration register bits */ +#define MAX310X_BRGCFG_2XMODE_BIT (1 << 4) /* Double baud rate */ +#define MAX310X_BRGCFG_4XMODE_BIT (1 << 5) /* Quadruple baud rate */ + +/* Clock source register bits */ +#define MAX310X_CLKSRC_CRYST_BIT (1 << 1) /* Crystal osc enable */ +#define MAX310X_CLKSRC_PLL_BIT (1 << 2) /* PLL enable */ +#define MAX310X_CLKSRC_PLLBYP_BIT (1 << 3) /* PLL bypass */ +#define MAX310X_CLKSRC_EXTCLK_BIT (1 << 4) /* External clock enable */ +#define MAX310X_CLKSRC_CLK2RTS_BIT (1 << 7) /* Baud clk to RTS pin */ + +/* Global commands */ +#define MAX310X_EXTREG_ENBL (0xce) +#define MAX310X_EXTREG_DSBL (0xcd) + +/* Misc definitions */ +#define MAX310X_FIFO_SIZE (128) +#define MAX310x_REV_MASK (0xf8) +#define MAX310X_WRITE_BIT 0x80 + +/* MAX3107 specific */ +#define MAX3107_REV_ID (0xa0) + +/* MAX3109 specific */ +#define MAX3109_REV_ID (0xc0) + +/* MAX14830 specific */ +#define MAX14830_BRGCFG_CLKDIS_BIT (1 << 6) /* Clock Disable */ +#define MAX14830_REV_ID (0xb0) + +struct max310x_if_cfg { + int (*extended_reg_enable)(struct device *dev, bool enable); + + unsigned int rev_id_reg; +}; + +struct max310x_devtype { + struct { + unsigned short min; + unsigned short max; + } slave_addr; + char name[9]; + int nr; + u8 mode1; + int (*detect)(struct device *); + void (*power)(struct uart_port *, int); +}; + +struct max310x_one { + struct uart_port port; + struct work_struct tx_work; + struct work_struct md_work; + struct work_struct rs_work; + struct regmap *regmap; + + u8 rx_buf[MAX310X_FIFO_SIZE]; +}; +#define to_max310x_port(_port) \ + container_of(_port, struct max310x_one, port) + +struct max310x_port { + const struct max310x_devtype *devtype; + const struct max310x_if_cfg *if_cfg; + struct regmap *regmap; + struct clk *clk; +#ifdef CONFIG_GPIOLIB + struct gpio_chip gpio; +#endif + struct max310x_one p[]; +}; + +static struct uart_driver max310x_uart = { + .owner = THIS_MODULE, + .driver_name = MAX310X_NAME, + .dev_name = "ttyMAX", + .major = MAX310X_MAJOR, + .minor = MAX310X_MINOR, + .nr = MAX310X_UART_NRMAX, +}; + +static DECLARE_BITMAP(max310x_lines, MAX310X_UART_NRMAX); + +static u8 max310x_port_read(struct uart_port *port, u8 reg) +{ + struct max310x_one *one = to_max310x_port(port); + unsigned int val = 0; + + regmap_read(one->regmap, reg, &val); + + return val; +} + +static void max310x_port_write(struct uart_port *port, u8 reg, u8 val) +{ + struct max310x_one *one = to_max310x_port(port); + + regmap_write(one->regmap, reg, val); +} + +static void max310x_port_update(struct uart_port *port, u8 reg, u8 mask, u8 val) +{ + struct max310x_one *one = to_max310x_port(port); + + regmap_update_bits(one->regmap, reg, mask, val); +} + +static int max3107_detect(struct device *dev) +{ + struct max310x_port *s = dev_get_drvdata(dev); + unsigned int val = 0; + int ret; + + ret = regmap_read(s->regmap, MAX310X_REVID_REG, &val); + if (ret) + return ret; + + if (((val & MAX310x_REV_MASK) != MAX3107_REV_ID)) { + dev_err(dev, + "%s ID 0x%02x does not match\n", s->devtype->name, val); + return -ENODEV; + } + + return 0; +} + +static int max3108_detect(struct device *dev) +{ + struct max310x_port *s = dev_get_drvdata(dev); + unsigned int val = 0; + int ret; + + /* MAX3108 have not REV ID register, we just check default value + * from clocksource register to make sure everything works. + */ + ret = regmap_read(s->regmap, MAX310X_CLKSRC_REG, &val); + if (ret) + return ret; + + if (val != (MAX310X_CLKSRC_EXTCLK_BIT | MAX310X_CLKSRC_PLLBYP_BIT)) { + dev_err(dev, "%s not present\n", s->devtype->name); + return -ENODEV; + } + + return 0; +} + +static int max3109_detect(struct device *dev) +{ + struct max310x_port *s = dev_get_drvdata(dev); + unsigned int val = 0; + int ret; + + ret = s->if_cfg->extended_reg_enable(dev, true); + if (ret) + return ret; + + regmap_read(s->regmap, s->if_cfg->rev_id_reg, &val); + s->if_cfg->extended_reg_enable(dev, false); + if (((val & MAX310x_REV_MASK) != MAX3109_REV_ID)) { + dev_err(dev, + "%s ID 0x%02x does not match\n", s->devtype->name, val); + return -ENODEV; + } + + return 0; +} + +static void max310x_power(struct uart_port *port, int on) +{ + max310x_port_update(port, MAX310X_MODE1_REG, + MAX310X_MODE1_FORCESLEEP_BIT, + on ? 0 : MAX310X_MODE1_FORCESLEEP_BIT); + if (on) + msleep(50); +} + +static int max14830_detect(struct device *dev) +{ + struct max310x_port *s = dev_get_drvdata(dev); + unsigned int val = 0; + int ret; + + ret = s->if_cfg->extended_reg_enable(dev, true); + if (ret) + return ret; + + regmap_read(s->regmap, s->if_cfg->rev_id_reg, &val); + s->if_cfg->extended_reg_enable(dev, false); + if (((val & MAX310x_REV_MASK) != MAX14830_REV_ID)) { + dev_err(dev, + "%s ID 0x%02x does not match\n", s->devtype->name, val); + return -ENODEV; + } + + return 0; +} + +static void max14830_power(struct uart_port *port, int on) +{ + max310x_port_update(port, MAX310X_BRGCFG_REG, + MAX14830_BRGCFG_CLKDIS_BIT, + on ? 0 : MAX14830_BRGCFG_CLKDIS_BIT); + if (on) + msleep(50); +} + +static const struct max310x_devtype max3107_devtype = { + .name = "MAX3107", + .nr = 1, + .mode1 = MAX310X_MODE1_AUTOSLEEP_BIT | MAX310X_MODE1_IRQSEL_BIT, + .detect = max3107_detect, + .power = max310x_power, + .slave_addr = { + .min = 0x2c, + .max = 0x2f, + }, +}; + +static const struct max310x_devtype max3108_devtype = { + .name = "MAX3108", + .nr = 1, + .mode1 = MAX310X_MODE1_AUTOSLEEP_BIT, + .detect = max3108_detect, + .power = max310x_power, + .slave_addr = { + .min = 0x60, + .max = 0x6f, + }, +}; + +static const struct max310x_devtype max3109_devtype = { + .name = "MAX3109", + .nr = 2, + .mode1 = MAX310X_MODE1_AUTOSLEEP_BIT, + .detect = max3109_detect, + .power = max310x_power, + .slave_addr = { + .min = 0x60, + .max = 0x6f, + }, +}; + +static const struct max310x_devtype max14830_devtype = { + .name = "MAX14830", + .nr = 4, + .mode1 = MAX310X_MODE1_IRQSEL_BIT, + .detect = max14830_detect, + .power = max14830_power, + .slave_addr = { + .min = 0x60, + .max = 0x6f, + }, +}; + +static bool max310x_reg_writeable(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX310X_IRQSTS_REG: + case MAX310X_LSR_IRQSTS_REG: + case MAX310X_SPCHR_IRQSTS_REG: + case MAX310X_STS_IRQSTS_REG: + case MAX310X_TXFIFOLVL_REG: + case MAX310X_RXFIFOLVL_REG: + return false; + default: + break; + } + + return true; +} + +static bool max310x_reg_volatile(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX310X_RHR_REG: + case MAX310X_IRQSTS_REG: + case MAX310X_LSR_IRQSTS_REG: + case MAX310X_SPCHR_IRQSTS_REG: + case MAX310X_STS_IRQSTS_REG: + case MAX310X_TXFIFOLVL_REG: + case MAX310X_RXFIFOLVL_REG: + case MAX310X_GPIODATA_REG: + case MAX310X_BRGDIVLSB_REG: + case MAX310X_REG_05: + case MAX310X_REG_1F: + return true; + default: + break; + } + + return false; +} + +static bool max310x_reg_precious(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX310X_RHR_REG: + case MAX310X_IRQSTS_REG: + case MAX310X_SPCHR_IRQSTS_REG: + case MAX310X_STS_IRQSTS_REG: + return true; + default: + break; + } + + return false; +} + +static bool max310x_reg_noinc(struct device *dev, unsigned int reg) +{ + return reg == MAX310X_RHR_REG; +} + +static int max310x_set_baud(struct uart_port *port, int baud) +{ + unsigned int mode = 0, div = 0, frac = 0, c = 0, F = 0; + + /* + * Calculate the integer divisor first. Select a proper mode + * in case if the requested baud is too high for the pre-defined + * clocks frequency. + */ + div = port->uartclk / baud; + if (div < 8) { + /* Mode x4 */ + c = 4; + mode = MAX310X_BRGCFG_4XMODE_BIT; + } else if (div < 16) { + /* Mode x2 */ + c = 8; + mode = MAX310X_BRGCFG_2XMODE_BIT; + } else { + c = 16; + } + + /* Calculate the divisor in accordance with the fraction coefficient */ + div /= c; + F = c*baud; + + /* Calculate the baud rate fraction */ + if (div > 0) + frac = (16*(port->uartclk % F)) / F; + else + div = 1; + + max310x_port_write(port, MAX310X_BRGDIVMSB_REG, div >> 8); + max310x_port_write(port, MAX310X_BRGDIVLSB_REG, div); + max310x_port_write(port, MAX310X_BRGCFG_REG, frac | mode); + + /* Return the actual baud rate we just programmed */ + return (16*port->uartclk) / (c*(16*div + frac)); +} + +static int max310x_update_best_err(unsigned long f, long *besterr) +{ + /* Use baudrate 115200 for calculate error */ + long err = f % (460800 * 16); + + if ((*besterr < 0) || (*besterr > err)) { + *besterr = err; + return 0; + } + + return 1; +} + +static u32 max310x_set_ref_clk(struct device *dev, struct max310x_port *s, + unsigned long freq, bool xtal) +{ + unsigned int div, clksrc, pllcfg = 0; + long besterr = -1; + unsigned long fdiv, fmul, bestfreq = freq; + + /* First, update error without PLL */ + max310x_update_best_err(freq, &besterr); + + /* Try all possible PLL dividers */ + for (div = 1; (div <= 63) && besterr; div++) { + fdiv = DIV_ROUND_CLOSEST(freq, div); + + /* Try multiplier 6 */ + fmul = fdiv * 6; + if ((fdiv >= 500000) && (fdiv <= 800000)) + if (!max310x_update_best_err(fmul, &besterr)) { + pllcfg = (0 << 6) | div; + bestfreq = fmul; + } + /* Try multiplier 48 */ + fmul = fdiv * 48; + if ((fdiv >= 850000) && (fdiv <= 1200000)) + if (!max310x_update_best_err(fmul, &besterr)) { + pllcfg = (1 << 6) | div; + bestfreq = fmul; + } + /* Try multiplier 96 */ + fmul = fdiv * 96; + if ((fdiv >= 425000) && (fdiv <= 1000000)) + if (!max310x_update_best_err(fmul, &besterr)) { + pllcfg = (2 << 6) | div; + bestfreq = fmul; + } + /* Try multiplier 144 */ + fmul = fdiv * 144; + if ((fdiv >= 390000) && (fdiv <= 667000)) + if (!max310x_update_best_err(fmul, &besterr)) { + pllcfg = (3 << 6) | div; + bestfreq = fmul; + } + } + + /* Configure clock source */ + clksrc = MAX310X_CLKSRC_EXTCLK_BIT | (xtal ? MAX310X_CLKSRC_CRYST_BIT : 0); + + /* Configure PLL */ + if (pllcfg) { + clksrc |= MAX310X_CLKSRC_PLL_BIT; + regmap_write(s->regmap, MAX310X_PLLCFG_REG, pllcfg); + } else + clksrc |= MAX310X_CLKSRC_PLLBYP_BIT; + + regmap_write(s->regmap, MAX310X_CLKSRC_REG, clksrc); + + /* Wait for crystal */ + if (xtal) { + unsigned int val; + msleep(10); + regmap_read(s->regmap, MAX310X_STS_IRQSTS_REG, &val); + if (!(val & MAX310X_STS_CLKREADY_BIT)) { + dev_warn(dev, "clock is not stable yet\n"); + } + } + + return bestfreq; +} + +static void max310x_batch_write(struct uart_port *port, u8 *txbuf, unsigned int len) +{ + struct max310x_one *one = to_max310x_port(port); + + regmap_noinc_write(one->regmap, MAX310X_THR_REG, txbuf, len); +} + +static void max310x_batch_read(struct uart_port *port, u8 *rxbuf, unsigned int len) +{ + struct max310x_one *one = to_max310x_port(port); + + regmap_noinc_read(one->regmap, MAX310X_RHR_REG, rxbuf, len); +} + +static void max310x_handle_rx(struct uart_port *port, unsigned int rxlen) +{ + struct max310x_one *one = to_max310x_port(port); + unsigned int sts, i; + u8 ch, flag; + + if (port->read_status_mask == MAX310X_LSR_RXOVR_BIT) { + /* We are just reading, happily ignoring any error conditions. + * Break condition, parity checking, framing errors -- they + * are all ignored. That means that we can do a batch-read. + * + * There is a small opportunity for race if the RX FIFO + * overruns while we're reading the buffer; the datasheets says + * that the LSR register applies to the "current" character. + * That's also the reason why we cannot do batched reads when + * asked to check the individual statuses. + * */ + + sts = max310x_port_read(port, MAX310X_LSR_IRQSTS_REG); + max310x_batch_read(port, one->rx_buf, rxlen); + + port->icount.rx += rxlen; + flag = TTY_NORMAL; + sts &= port->read_status_mask; + + if (sts & MAX310X_LSR_RXOVR_BIT) { + dev_warn_ratelimited(port->dev, "Hardware RX FIFO overrun\n"); + port->icount.overrun++; + } + + for (i = 0; i < (rxlen - 1); ++i) + uart_insert_char(port, sts, 0, one->rx_buf[i], flag); + + /* + * Handle the overrun case for the last character only, since + * the RxFIFO overflow happens after it is pushed to the FIFO + * tail. + */ + uart_insert_char(port, sts, MAX310X_LSR_RXOVR_BIT, + one->rx_buf[rxlen-1], flag); + + } else { + if (unlikely(rxlen >= port->fifosize)) { + dev_warn_ratelimited(port->dev, "Possible RX FIFO overrun\n"); + port->icount.buf_overrun++; + /* Ensure sanity of RX level */ + rxlen = port->fifosize; + } + + while (rxlen--) { + ch = max310x_port_read(port, MAX310X_RHR_REG); + sts = max310x_port_read(port, MAX310X_LSR_IRQSTS_REG); + + sts &= MAX310X_LSR_RXPAR_BIT | MAX310X_LSR_FRERR_BIT | + MAX310X_LSR_RXOVR_BIT | MAX310X_LSR_RXBRK_BIT; + + port->icount.rx++; + flag = TTY_NORMAL; + + if (unlikely(sts)) { + if (sts & MAX310X_LSR_RXBRK_BIT) { + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } else if (sts & MAX310X_LSR_RXPAR_BIT) + port->icount.parity++; + else if (sts & MAX310X_LSR_FRERR_BIT) + port->icount.frame++; + else if (sts & MAX310X_LSR_RXOVR_BIT) + port->icount.overrun++; + + sts &= port->read_status_mask; + if (sts & MAX310X_LSR_RXBRK_BIT) + flag = TTY_BREAK; + else if (sts & MAX310X_LSR_RXPAR_BIT) + flag = TTY_PARITY; + else if (sts & MAX310X_LSR_FRERR_BIT) + flag = TTY_FRAME; + else if (sts & MAX310X_LSR_RXOVR_BIT) + flag = TTY_OVERRUN; + } + + if (uart_handle_sysrq_char(port, ch)) + continue; + + if (sts & port->ignore_status_mask) + continue; + + uart_insert_char(port, sts, MAX310X_LSR_RXOVR_BIT, ch, flag); + } + } + + tty_flip_buffer_push(&port->state->port); +} + +static void max310x_handle_tx(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + unsigned int txlen, to_send, until_end; + + if (unlikely(port->x_char)) { + max310x_port_write(port, MAX310X_THR_REG, port->x_char); + port->icount.tx++; + port->x_char = 0; + return; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) + return; + + /* Get length of data pending in circular buffer */ + to_send = uart_circ_chars_pending(xmit); + until_end = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + if (likely(to_send)) { + /* Limit to size of TX FIFO */ + txlen = max310x_port_read(port, MAX310X_TXFIFOLVL_REG); + txlen = port->fifosize - txlen; + to_send = (to_send > txlen) ? txlen : to_send; + + if (until_end < to_send) { + /* It's a circ buffer -- wrap around. + * We could do that in one SPI transaction, but meh. */ + max310x_batch_write(port, xmit->buf + xmit->tail, until_end); + max310x_batch_write(port, xmit->buf, to_send - until_end); + } else { + max310x_batch_write(port, xmit->buf + xmit->tail, to_send); + } + uart_xmit_advance(port, to_send); + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); +} + +static void max310x_start_tx(struct uart_port *port) +{ + struct max310x_one *one = to_max310x_port(port); + + schedule_work(&one->tx_work); +} + +static irqreturn_t max310x_port_irq(struct max310x_port *s, int portno) +{ + struct uart_port *port = &s->p[portno].port; + irqreturn_t res = IRQ_NONE; + + do { + unsigned int ists, lsr, rxlen; + + /* Read IRQ status & RX FIFO level */ + ists = max310x_port_read(port, MAX310X_IRQSTS_REG); + rxlen = max310x_port_read(port, MAX310X_RXFIFOLVL_REG); + if (!ists && !rxlen) + break; + + res = IRQ_HANDLED; + + if (ists & MAX310X_IRQ_CTS_BIT) { + lsr = max310x_port_read(port, MAX310X_LSR_IRQSTS_REG); + uart_handle_cts_change(port, lsr & MAX310X_LSR_CTS_BIT); + } + if (rxlen) + max310x_handle_rx(port, rxlen); + if (ists & MAX310X_IRQ_TXEMPTY_BIT) + max310x_start_tx(port); + } while (1); + return res; +} + +static irqreturn_t max310x_ist(int irq, void *dev_id) +{ + struct max310x_port *s = (struct max310x_port *)dev_id; + bool handled = false; + + if (s->devtype->nr > 1) { + do { + unsigned int val = ~0; + + WARN_ON_ONCE(regmap_read(s->regmap, + MAX310X_GLOBALIRQ_REG, &val)); + val = ((1 << s->devtype->nr) - 1) & ~val; + if (!val) + break; + if (max310x_port_irq(s, fls(val) - 1) == IRQ_HANDLED) + handled = true; + } while (1); + } else { + if (max310x_port_irq(s, 0) == IRQ_HANDLED) + handled = true; + } + + return IRQ_RETVAL(handled); +} + +static void max310x_tx_proc(struct work_struct *ws) +{ + struct max310x_one *one = container_of(ws, struct max310x_one, tx_work); + + max310x_handle_tx(&one->port); +} + +static unsigned int max310x_tx_empty(struct uart_port *port) +{ + u8 lvl = max310x_port_read(port, MAX310X_TXFIFOLVL_REG); + + return lvl ? 0 : TIOCSER_TEMT; +} + +static unsigned int max310x_get_mctrl(struct uart_port *port) +{ + /* DCD and DSR are not wired and CTS/RTS is handled automatically + * so just indicate DSR and CAR asserted + */ + return TIOCM_DSR | TIOCM_CAR; +} + +static void max310x_md_proc(struct work_struct *ws) +{ + struct max310x_one *one = container_of(ws, struct max310x_one, md_work); + + max310x_port_update(&one->port, MAX310X_MODE2_REG, + MAX310X_MODE2_LOOPBACK_BIT, + (one->port.mctrl & TIOCM_LOOP) ? + MAX310X_MODE2_LOOPBACK_BIT : 0); +} + +static void max310x_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct max310x_one *one = to_max310x_port(port); + + schedule_work(&one->md_work); +} + +static void max310x_break_ctl(struct uart_port *port, int break_state) +{ + max310x_port_update(port, MAX310X_LCR_REG, + MAX310X_LCR_TXBREAK_BIT, + break_state ? MAX310X_LCR_TXBREAK_BIT : 0); +} + +static void max310x_set_termios(struct uart_port *port, + struct ktermios *termios, + const struct ktermios *old) +{ + unsigned int lcr = 0, flow = 0; + int baud; + + /* Mask termios capabilities we don't support */ + termios->c_cflag &= ~CMSPAR; + + /* Word size */ + switch (termios->c_cflag & CSIZE) { + case CS5: + break; + case CS6: + lcr = MAX310X_LCR_LENGTH0_BIT; + break; + case CS7: + lcr = MAX310X_LCR_LENGTH1_BIT; + break; + case CS8: + default: + lcr = MAX310X_LCR_LENGTH1_BIT | MAX310X_LCR_LENGTH0_BIT; + break; + } + + /* Parity */ + if (termios->c_cflag & PARENB) { + lcr |= MAX310X_LCR_PARITY_BIT; + if (!(termios->c_cflag & PARODD)) + lcr |= MAX310X_LCR_EVENPARITY_BIT; + } + + /* Stop bits */ + if (termios->c_cflag & CSTOPB) + lcr |= MAX310X_LCR_STOPLEN_BIT; /* 2 stops */ + + /* Update LCR register */ + max310x_port_write(port, MAX310X_LCR_REG, lcr); + + /* Set read status mask */ + port->read_status_mask = MAX310X_LSR_RXOVR_BIT; + if (termios->c_iflag & INPCK) + port->read_status_mask |= MAX310X_LSR_RXPAR_BIT | + MAX310X_LSR_FRERR_BIT; + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + port->read_status_mask |= MAX310X_LSR_RXBRK_BIT; + + /* Set status ignore mask */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNBRK) + port->ignore_status_mask |= MAX310X_LSR_RXBRK_BIT; + if (!(termios->c_cflag & CREAD)) + port->ignore_status_mask |= MAX310X_LSR_RXPAR_BIT | + MAX310X_LSR_RXOVR_BIT | + MAX310X_LSR_FRERR_BIT | + MAX310X_LSR_RXBRK_BIT; + + /* Configure flow control */ + max310x_port_write(port, MAX310X_XON1_REG, termios->c_cc[VSTART]); + max310x_port_write(port, MAX310X_XOFF1_REG, termios->c_cc[VSTOP]); + + /* Disable transmitter before enabling AutoCTS or auto transmitter + * flow control + */ + if (termios->c_cflag & CRTSCTS || termios->c_iflag & IXOFF) { + max310x_port_update(port, MAX310X_MODE1_REG, + MAX310X_MODE1_TXDIS_BIT, + MAX310X_MODE1_TXDIS_BIT); + } + + port->status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF); + + if (termios->c_cflag & CRTSCTS) { + /* Enable AUTORTS and AUTOCTS */ + port->status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS; + flow |= MAX310X_FLOWCTRL_AUTOCTS_BIT | + MAX310X_FLOWCTRL_AUTORTS_BIT; + } + if (termios->c_iflag & IXON) + flow |= MAX310X_FLOWCTRL_SWFLOW3_BIT | + MAX310X_FLOWCTRL_SWFLOWEN_BIT; + if (termios->c_iflag & IXOFF) { + port->status |= UPSTAT_AUTOXOFF; + flow |= MAX310X_FLOWCTRL_SWFLOW1_BIT | + MAX310X_FLOWCTRL_SWFLOWEN_BIT; + } + max310x_port_write(port, MAX310X_FLOWCTRL_REG, flow); + + /* Enable transmitter after disabling AutoCTS and auto transmitter + * flow control + */ + if (!(termios->c_cflag & CRTSCTS) && !(termios->c_iflag & IXOFF)) { + max310x_port_update(port, MAX310X_MODE1_REG, + MAX310X_MODE1_TXDIS_BIT, + 0); + } + + /* Get baud rate generator configuration */ + baud = uart_get_baud_rate(port, termios, old, + port->uartclk / 16 / 0xffff, + port->uartclk / 4); + + /* Setup baudrate generator */ + baud = max310x_set_baud(port, baud); + + /* Update timeout according to new baud rate */ + uart_update_timeout(port, termios->c_cflag, baud); +} + +static void max310x_rs_proc(struct work_struct *ws) +{ + struct max310x_one *one = container_of(ws, struct max310x_one, rs_work); + unsigned int delay, mode1 = 0, mode2 = 0; + + delay = (one->port.rs485.delay_rts_before_send << 4) | + one->port.rs485.delay_rts_after_send; + max310x_port_write(&one->port, MAX310X_HDPIXDELAY_REG, delay); + + if (one->port.rs485.flags & SER_RS485_ENABLED) { + mode1 = MAX310X_MODE1_TRNSCVCTRL_BIT; + + if (!(one->port.rs485.flags & SER_RS485_RX_DURING_TX)) + mode2 = MAX310X_MODE2_ECHOSUPR_BIT; + } + + max310x_port_update(&one->port, MAX310X_MODE1_REG, + MAX310X_MODE1_TRNSCVCTRL_BIT, mode1); + max310x_port_update(&one->port, MAX310X_MODE2_REG, + MAX310X_MODE2_ECHOSUPR_BIT, mode2); +} + +static int max310x_rs485_config(struct uart_port *port, struct ktermios *termios, + struct serial_rs485 *rs485) +{ + struct max310x_one *one = to_max310x_port(port); + + if ((rs485->delay_rts_before_send > 0x0f) || + (rs485->delay_rts_after_send > 0x0f)) + return -ERANGE; + + port->rs485 = *rs485; + + schedule_work(&one->rs_work); + + return 0; +} + +static int max310x_startup(struct uart_port *port) +{ + struct max310x_port *s = dev_get_drvdata(port->dev); + unsigned int val; + + s->devtype->power(port, 1); + + /* Configure MODE1 register */ + max310x_port_update(port, MAX310X_MODE1_REG, + MAX310X_MODE1_TRNSCVCTRL_BIT, 0); + + /* Configure MODE2 register & Reset FIFOs*/ + val = MAX310X_MODE2_RXEMPTINV_BIT | MAX310X_MODE2_FIFORST_BIT; + max310x_port_write(port, MAX310X_MODE2_REG, val); + max310x_port_update(port, MAX310X_MODE2_REG, + MAX310X_MODE2_FIFORST_BIT, 0); + + /* Configure mode1/mode2 to have rs485/rs232 enabled at startup */ + val = (clamp(port->rs485.delay_rts_before_send, 0U, 15U) << 4) | + clamp(port->rs485.delay_rts_after_send, 0U, 15U); + max310x_port_write(port, MAX310X_HDPIXDELAY_REG, val); + + if (port->rs485.flags & SER_RS485_ENABLED) { + max310x_port_update(port, MAX310X_MODE1_REG, + MAX310X_MODE1_TRNSCVCTRL_BIT, + MAX310X_MODE1_TRNSCVCTRL_BIT); + + if (!(port->rs485.flags & SER_RS485_RX_DURING_TX)) + max310x_port_update(port, MAX310X_MODE2_REG, + MAX310X_MODE2_ECHOSUPR_BIT, + MAX310X_MODE2_ECHOSUPR_BIT); + } + + /* Configure flow control levels */ + /* Flow control halt level 96, resume level 48 */ + max310x_port_write(port, MAX310X_FLOWLVL_REG, + MAX310X_FLOWLVL_RES(48) | MAX310X_FLOWLVL_HALT(96)); + + /* Clear IRQ status register */ + max310x_port_read(port, MAX310X_IRQSTS_REG); + + /* Enable RX, TX, CTS change interrupts */ + val = MAX310X_IRQ_RXEMPTY_BIT | MAX310X_IRQ_TXEMPTY_BIT; + max310x_port_write(port, MAX310X_IRQEN_REG, val | MAX310X_IRQ_CTS_BIT); + + return 0; +} + +static void max310x_shutdown(struct uart_port *port) +{ + struct max310x_port *s = dev_get_drvdata(port->dev); + + /* Disable all interrupts */ + max310x_port_write(port, MAX310X_IRQEN_REG, 0); + + s->devtype->power(port, 0); +} + +static const char *max310x_type(struct uart_port *port) +{ + struct max310x_port *s = dev_get_drvdata(port->dev); + + return (port->type == PORT_MAX310X) ? s->devtype->name : NULL; +} + +static int max310x_request_port(struct uart_port *port) +{ + /* Do nothing */ + return 0; +} + +static void max310x_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_MAX310X; +} + +static int max310x_verify_port(struct uart_port *port, struct serial_struct *s) +{ + if ((s->type != PORT_UNKNOWN) && (s->type != PORT_MAX310X)) + return -EINVAL; + if (s->irq != port->irq) + return -EINVAL; + + return 0; +} + +static void max310x_null_void(struct uart_port *port) +{ + /* Do nothing */ +} + +static const struct uart_ops max310x_ops = { + .tx_empty = max310x_tx_empty, + .set_mctrl = max310x_set_mctrl, + .get_mctrl = max310x_get_mctrl, + .stop_tx = max310x_null_void, + .start_tx = max310x_start_tx, + .stop_rx = max310x_null_void, + .break_ctl = max310x_break_ctl, + .startup = max310x_startup, + .shutdown = max310x_shutdown, + .set_termios = max310x_set_termios, + .type = max310x_type, + .request_port = max310x_request_port, + .release_port = max310x_null_void, + .config_port = max310x_config_port, + .verify_port = max310x_verify_port, +}; + +static int __maybe_unused max310x_suspend(struct device *dev) +{ + struct max310x_port *s = dev_get_drvdata(dev); + int i; + + for (i = 0; i < s->devtype->nr; i++) { + uart_suspend_port(&max310x_uart, &s->p[i].port); + s->devtype->power(&s->p[i].port, 0); + } + + return 0; +} + +static int __maybe_unused max310x_resume(struct device *dev) +{ + struct max310x_port *s = dev_get_drvdata(dev); + int i; + + for (i = 0; i < s->devtype->nr; i++) { + s->devtype->power(&s->p[i].port, 1); + uart_resume_port(&max310x_uart, &s->p[i].port); + } + + return 0; +} + +static SIMPLE_DEV_PM_OPS(max310x_pm_ops, max310x_suspend, max310x_resume); + +#ifdef CONFIG_GPIOLIB +static int max310x_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + unsigned int val; + struct max310x_port *s = gpiochip_get_data(chip); + struct uart_port *port = &s->p[offset / 4].port; + + val = max310x_port_read(port, MAX310X_GPIODATA_REG); + + return !!((val >> 4) & (1 << (offset % 4))); +} + +static void max310x_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct max310x_port *s = gpiochip_get_data(chip); + struct uart_port *port = &s->p[offset / 4].port; + + max310x_port_update(port, MAX310X_GPIODATA_REG, 1 << (offset % 4), + value ? 1 << (offset % 4) : 0); +} + +static int max310x_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct max310x_port *s = gpiochip_get_data(chip); + struct uart_port *port = &s->p[offset / 4].port; + + max310x_port_update(port, MAX310X_GPIOCFG_REG, 1 << (offset % 4), 0); + + return 0; +} + +static int max310x_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct max310x_port *s = gpiochip_get_data(chip); + struct uart_port *port = &s->p[offset / 4].port; + + max310x_port_update(port, MAX310X_GPIODATA_REG, 1 << (offset % 4), + value ? 1 << (offset % 4) : 0); + max310x_port_update(port, MAX310X_GPIOCFG_REG, 1 << (offset % 4), + 1 << (offset % 4)); + + return 0; +} + +static int max310x_gpio_set_config(struct gpio_chip *chip, unsigned int offset, + unsigned long config) +{ + struct max310x_port *s = gpiochip_get_data(chip); + struct uart_port *port = &s->p[offset / 4].port; + + switch (pinconf_to_config_param(config)) { + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + max310x_port_update(port, MAX310X_GPIOCFG_REG, + 1 << ((offset % 4) + 4), + 1 << ((offset % 4) + 4)); + return 0; + case PIN_CONFIG_DRIVE_PUSH_PULL: + max310x_port_update(port, MAX310X_GPIOCFG_REG, + 1 << ((offset % 4) + 4), 0); + return 0; + default: + return -ENOTSUPP; + } +} +#endif + +static const struct serial_rs485 max310x_rs485_supported = { + .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RX_DURING_TX, + .delay_rts_before_send = 1, + .delay_rts_after_send = 1, +}; + +static int max310x_probe(struct device *dev, const struct max310x_devtype *devtype, + const struct max310x_if_cfg *if_cfg, + struct regmap *regmaps[], int irq) +{ + int i, ret, fmin, fmax, freq; + struct max310x_port *s; + u32 uartclk = 0; + bool xtal; + + for (i = 0; i < devtype->nr; i++) + if (IS_ERR(regmaps[i])) + return PTR_ERR(regmaps[i]); + + /* Alloc port structure */ + s = devm_kzalloc(dev, struct_size(s, p, devtype->nr), GFP_KERNEL); + if (!s) { + dev_err(dev, "Error allocating port structure\n"); + return -ENOMEM; + } + + /* Always ask for fixed clock rate from a property. */ + device_property_read_u32(dev, "clock-frequency", &uartclk); + + xtal = device_property_match_string(dev, "clock-names", "osc") < 0; + if (xtal) + s->clk = devm_clk_get_optional(dev, "xtal"); + else + s->clk = devm_clk_get_optional(dev, "osc"); + if (IS_ERR(s->clk)) + return PTR_ERR(s->clk); + + ret = clk_prepare_enable(s->clk); + if (ret) + return ret; + + freq = clk_get_rate(s->clk); + if (freq == 0) + freq = uartclk; + if (freq == 0) { + dev_err(dev, "Cannot get clock rate\n"); + ret = -EINVAL; + goto out_clk; + } + + if (xtal) { + fmin = 1000000; + fmax = 4000000; + } else { + fmin = 500000; + fmax = 35000000; + } + + /* Check frequency limits */ + if (freq < fmin || freq > fmax) { + ret = -ERANGE; + goto out_clk; + } + + s->regmap = regmaps[0]; + s->devtype = devtype; + s->if_cfg = if_cfg; + dev_set_drvdata(dev, s); + + /* Check device to ensure we are talking to what we expect */ + ret = devtype->detect(dev); + if (ret) + goto out_clk; + + for (i = 0; i < devtype->nr; i++) { + /* Reset port */ + regmap_write(regmaps[i], MAX310X_MODE2_REG, + MAX310X_MODE2_RST_BIT); + /* Clear port reset */ + regmap_write(regmaps[i], MAX310X_MODE2_REG, 0); + + /* Wait for port startup */ + do { + regmap_read(regmaps[i], MAX310X_BRGDIVLSB_REG, &ret); + } while (ret != 0x01); + + regmap_write(regmaps[i], MAX310X_MODE1_REG, devtype->mode1); + } + + uartclk = max310x_set_ref_clk(dev, s, freq, xtal); + dev_dbg(dev, "Reference clock set to %i Hz\n", uartclk); + + for (i = 0; i < devtype->nr; i++) { + unsigned int line; + + line = find_first_zero_bit(max310x_lines, MAX310X_UART_NRMAX); + if (line == MAX310X_UART_NRMAX) { + ret = -ERANGE; + goto out_uart; + } + + /* Initialize port data */ + s->p[i].port.line = line; + s->p[i].port.dev = dev; + s->p[i].port.irq = irq; + s->p[i].port.type = PORT_MAX310X; + s->p[i].port.fifosize = MAX310X_FIFO_SIZE; + s->p[i].port.flags = UPF_FIXED_TYPE | UPF_LOW_LATENCY; + s->p[i].port.iotype = UPIO_PORT; + s->p[i].port.iobase = i; + /* + * Use all ones as membase to make sure uart_configure_port() in + * serial_core.c does not abort for SPI/I2C devices where the + * membase address is not applicable. + */ + s->p[i].port.membase = (void __iomem *)~0; + s->p[i].port.uartclk = uartclk; + s->p[i].port.rs485_config = max310x_rs485_config; + s->p[i].port.rs485_supported = max310x_rs485_supported; + s->p[i].port.ops = &max310x_ops; + s->p[i].regmap = regmaps[i]; + + /* Disable all interrupts */ + max310x_port_write(&s->p[i].port, MAX310X_IRQEN_REG, 0); + /* Clear IRQ status register */ + max310x_port_read(&s->p[i].port, MAX310X_IRQSTS_REG); + /* Initialize queue for start TX */ + INIT_WORK(&s->p[i].tx_work, max310x_tx_proc); + /* Initialize queue for changing LOOPBACK mode */ + INIT_WORK(&s->p[i].md_work, max310x_md_proc); + /* Initialize queue for changing RS485 mode */ + INIT_WORK(&s->p[i].rs_work, max310x_rs_proc); + + /* Register port */ + ret = uart_add_one_port(&max310x_uart, &s->p[i].port); + if (ret) { + s->p[i].port.dev = NULL; + goto out_uart; + } + set_bit(line, max310x_lines); + + /* Go to suspend mode */ + devtype->power(&s->p[i].port, 0); + } + +#ifdef CONFIG_GPIOLIB + /* Setup GPIO controller */ + s->gpio.owner = THIS_MODULE; + s->gpio.parent = dev; + s->gpio.label = devtype->name; + s->gpio.direction_input = max310x_gpio_direction_input; + s->gpio.get = max310x_gpio_get; + s->gpio.direction_output= max310x_gpio_direction_output; + s->gpio.set = max310x_gpio_set; + s->gpio.set_config = max310x_gpio_set_config; + s->gpio.base = -1; + s->gpio.ngpio = devtype->nr * 4; + s->gpio.can_sleep = 1; + ret = devm_gpiochip_add_data(dev, &s->gpio, s); + if (ret) + goto out_uart; +#endif + + /* Setup interrupt */ + ret = devm_request_threaded_irq(dev, irq, NULL, max310x_ist, + IRQF_ONESHOT | IRQF_SHARED, dev_name(dev), s); + if (!ret) + return 0; + + dev_err(dev, "Unable to reguest IRQ %i\n", irq); + +out_uart: + for (i = 0; i < devtype->nr; i++) { + if (s->p[i].port.dev) { + uart_remove_one_port(&max310x_uart, &s->p[i].port); + clear_bit(s->p[i].port.line, max310x_lines); + } + } + +out_clk: + clk_disable_unprepare(s->clk); + + return ret; +} + +static void max310x_remove(struct device *dev) +{ + struct max310x_port *s = dev_get_drvdata(dev); + int i; + + for (i = 0; i < s->devtype->nr; i++) { + cancel_work_sync(&s->p[i].tx_work); + cancel_work_sync(&s->p[i].md_work); + cancel_work_sync(&s->p[i].rs_work); + uart_remove_one_port(&max310x_uart, &s->p[i].port); + clear_bit(s->p[i].port.line, max310x_lines); + s->devtype->power(&s->p[i].port, 0); + } + + clk_disable_unprepare(s->clk); +} + +static const struct of_device_id __maybe_unused max310x_dt_ids[] = { + { .compatible = "maxim,max3107", .data = &max3107_devtype, }, + { .compatible = "maxim,max3108", .data = &max3108_devtype, }, + { .compatible = "maxim,max3109", .data = &max3109_devtype, }, + { .compatible = "maxim,max14830", .data = &max14830_devtype }, + { } +}; +MODULE_DEVICE_TABLE(of, max310x_dt_ids); + +static struct regmap_config regcfg = { + .reg_bits = 8, + .val_bits = 8, + .write_flag_mask = MAX310X_WRITE_BIT, + .cache_type = REGCACHE_RBTREE, + .max_register = MAX310X_REG_1F, + .writeable_reg = max310x_reg_writeable, + .volatile_reg = max310x_reg_volatile, + .precious_reg = max310x_reg_precious, + .writeable_noinc_reg = max310x_reg_noinc, + .readable_noinc_reg = max310x_reg_noinc, + .max_raw_read = MAX310X_FIFO_SIZE, + .max_raw_write = MAX310X_FIFO_SIZE, +}; + +#ifdef CONFIG_SPI_MASTER +static int max310x_spi_extended_reg_enable(struct device *dev, bool enable) +{ + struct max310x_port *s = dev_get_drvdata(dev); + + return regmap_write(s->regmap, MAX310X_GLOBALCMD_REG, + enable ? MAX310X_EXTREG_ENBL : MAX310X_EXTREG_DSBL); +} + +static const struct max310x_if_cfg __maybe_unused max310x_spi_if_cfg = { + .extended_reg_enable = max310x_spi_extended_reg_enable, + .rev_id_reg = MAX310X_SPI_REVID_EXTREG, +}; + +static int max310x_spi_probe(struct spi_device *spi) +{ + const struct max310x_devtype *devtype; + struct regmap *regmaps[4]; + unsigned int i; + int ret; + + /* Setup SPI bus */ + spi->bits_per_word = 8; + spi->mode = spi->mode ? : SPI_MODE_0; + spi->max_speed_hz = spi->max_speed_hz ? : 26000000; + ret = spi_setup(spi); + if (ret) + return ret; + + devtype = device_get_match_data(&spi->dev); + if (!devtype) + devtype = (struct max310x_devtype *)spi_get_device_id(spi)->driver_data; + + for (i = 0; i < devtype->nr; i++) { + u8 port_mask = i * 0x20; + regcfg.read_flag_mask = port_mask; + regcfg.write_flag_mask = port_mask | MAX310X_WRITE_BIT; + regmaps[i] = devm_regmap_init_spi(spi, ®cfg); + } + + return max310x_probe(&spi->dev, devtype, &max310x_spi_if_cfg, regmaps, spi->irq); +} + +static void max310x_spi_remove(struct spi_device *spi) +{ + max310x_remove(&spi->dev); +} + +static const struct spi_device_id max310x_id_table[] = { + { "max3107", (kernel_ulong_t)&max3107_devtype, }, + { "max3108", (kernel_ulong_t)&max3108_devtype, }, + { "max3109", (kernel_ulong_t)&max3109_devtype, }, + { "max14830", (kernel_ulong_t)&max14830_devtype, }, + { } +}; +MODULE_DEVICE_TABLE(spi, max310x_id_table); + +static struct spi_driver max310x_spi_driver = { + .driver = { + .name = MAX310X_NAME, + .of_match_table = max310x_dt_ids, + .pm = &max310x_pm_ops, + }, + .probe = max310x_spi_probe, + .remove = max310x_spi_remove, + .id_table = max310x_id_table, +}; +#endif + +#ifdef CONFIG_I2C +static int max310x_i2c_extended_reg_enable(struct device *dev, bool enable) +{ + return 0; +} + +static struct regmap_config regcfg_i2c = { + .reg_bits = 8, + .val_bits = 8, + .cache_type = REGCACHE_RBTREE, + .writeable_reg = max310x_reg_writeable, + .volatile_reg = max310x_reg_volatile, + .precious_reg = max310x_reg_precious, + .max_register = MAX310X_I2C_REVID_EXTREG, + .writeable_noinc_reg = max310x_reg_noinc, + .readable_noinc_reg = max310x_reg_noinc, + .max_raw_read = MAX310X_FIFO_SIZE, + .max_raw_write = MAX310X_FIFO_SIZE, +}; + +static const struct max310x_if_cfg max310x_i2c_if_cfg = { + .extended_reg_enable = max310x_i2c_extended_reg_enable, + .rev_id_reg = MAX310X_I2C_REVID_EXTREG, +}; + +static unsigned short max310x_i2c_slave_addr(unsigned short addr, + unsigned int nr) +{ + /* + * For MAX14830 and MAX3109, the slave address depends on what the + * A0 and A1 pins are tied to. + * See Table I2C Address Map of the datasheet. + * Based on that table, the following formulas were determined. + * UART1 - UART0 = 0x10 + * UART2 - UART1 = 0x20 + 0x10 + * UART3 - UART2 = 0x10 + */ + + addr -= nr * 0x10; + + if (nr >= 2) + addr -= 0x20; + + return addr; +} + +static int max310x_i2c_probe(struct i2c_client *client) +{ + const struct max310x_devtype *devtype = + device_get_match_data(&client->dev); + struct i2c_client *port_client; + struct regmap *regmaps[4]; + unsigned int i; + u8 port_addr; + + if (client->addr < devtype->slave_addr.min || + client->addr > devtype->slave_addr.max) + return dev_err_probe(&client->dev, -EINVAL, + "Slave addr 0x%x outside of range [0x%x, 0x%x]\n", + client->addr, devtype->slave_addr.min, + devtype->slave_addr.max); + + regmaps[0] = devm_regmap_init_i2c(client, ®cfg_i2c); + + for (i = 1; i < devtype->nr; i++) { + port_addr = max310x_i2c_slave_addr(client->addr, i); + port_client = devm_i2c_new_dummy_device(&client->dev, + client->adapter, + port_addr); + + regmaps[i] = devm_regmap_init_i2c(port_client, ®cfg_i2c); + } + + return max310x_probe(&client->dev, devtype, &max310x_i2c_if_cfg, + regmaps, client->irq); +} + +static void max310x_i2c_remove(struct i2c_client *client) +{ + max310x_remove(&client->dev); +} + +static struct i2c_driver max310x_i2c_driver = { + .driver = { + .name = MAX310X_NAME, + .of_match_table = max310x_dt_ids, + .pm = &max310x_pm_ops, + }, + .probe = max310x_i2c_probe, + .remove = max310x_i2c_remove, +}; +#endif + +static int __init max310x_uart_init(void) +{ + int ret; + + bitmap_zero(max310x_lines, MAX310X_UART_NRMAX); + + ret = uart_register_driver(&max310x_uart); + if (ret) + return ret; + +#ifdef CONFIG_SPI_MASTER + ret = spi_register_driver(&max310x_spi_driver); + if (ret) + goto err_spi_register; +#endif + +#ifdef CONFIG_I2C + ret = i2c_add_driver(&max310x_i2c_driver); + if (ret) + goto err_i2c_register; +#endif + + return 0; + +#ifdef CONFIG_I2C +err_i2c_register: + spi_unregister_driver(&max310x_spi_driver); +#endif + +err_spi_register: + uart_unregister_driver(&max310x_uart); + + return ret; +} +module_init(max310x_uart_init); + +static void __exit max310x_uart_exit(void) +{ +#ifdef CONFIG_I2C + i2c_del_driver(&max310x_i2c_driver); +#endif + +#ifdef CONFIG_SPI_MASTER + spi_unregister_driver(&max310x_spi_driver); +#endif + + uart_unregister_driver(&max310x_uart); +} +module_exit(max310x_uart_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>"); +MODULE_DESCRIPTION("MAX310X serial driver"); |