diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/usb/dwc2/Kconfig | 97 | ||||
| -rw-r--r-- | drivers/usb/dwc2/Makefile | 29 | ||||
| -rw-r--r-- | drivers/usb/dwc2/core.c | 1174 | ||||
| -rw-r--r-- | drivers/usb/dwc2/core.h | 1529 | ||||
| -rw-r--r-- | drivers/usb/dwc2/core_intr.c | 865 | ||||
| -rw-r--r-- | drivers/usb/dwc2/debug.h | 19 | ||||
| -rw-r--r-- | drivers/usb/dwc2/debugfs.c | 811 | ||||
| -rw-r--r-- | drivers/usb/dwc2/drd.c | 250 | ||||
| -rw-r--r-- | drivers/usb/dwc2/gadget.c | 5676 | ||||
| -rw-r--r-- | drivers/usb/dwc2/hcd.c | 5954 | ||||
| -rw-r--r-- | drivers/usb/dwc2/hcd.h | 787 | ||||
| -rw-r--r-- | drivers/usb/dwc2/hcd_ddma.c | 1347 | ||||
| -rw-r--r-- | drivers/usb/dwc2/hcd_intr.c | 2266 | ||||
| -rw-r--r-- | drivers/usb/dwc2/hcd_queue.c | 2069 | ||||
| -rw-r--r-- | drivers/usb/dwc2/hw.h | 875 | ||||
| -rw-r--r-- | drivers/usb/dwc2/params.c | 1001 | ||||
| -rw-r--r-- | drivers/usb/dwc2/pci.c | 136 | ||||
| -rw-r--r-- | drivers/usb/dwc2/platform.c | 761 |
18 files changed, 25646 insertions, 0 deletions
diff --git a/drivers/usb/dwc2/Kconfig b/drivers/usb/dwc2/Kconfig new file mode 100644 index 0000000000..c131719367 --- /dev/null +++ b/drivers/usb/dwc2/Kconfig @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: GPL-2.0 + +config USB_DWC2 + tristate "DesignWare USB2 DRD Core Support" + depends on HAS_DMA + depends on USB || USB_GADGET + depends on HAS_IOMEM + select USB_ROLE_SWITCH + help + Say Y here if your system has a Dual Role Hi-Speed USB + controller based on the DesignWare HSOTG IP Core. + + For host mode, if you choose to build the driver as dynamically + linked modules, the core module will be called dwc2.ko, the PCI + bus interface module (if you have a PCI bus system) will be + called dwc2_pci.ko, and the platform interface module (for + controllers directly connected to the CPU) will be called + dwc2_platform.ko. For all modes(host, gadget and dual-role), there + will be an additional module named dwc2.ko. + +if USB_DWC2 + +choice + bool "DWC2 Mode Selection" + default USB_DWC2_DUAL_ROLE if (USB && USB_GADGET) + default USB_DWC2_HOST if (USB && !USB_GADGET) + default USB_DWC2_PERIPHERAL if (!USB && USB_GADGET) + +config USB_DWC2_HOST + bool "Host only mode" + depends on USB=y || (USB_DWC2=m && USB) + help + The Designware USB2.0 high-speed host controller + integrated into many SoCs. Select this option if you want the + driver to operate in Host-only mode. + +comment "Gadget/Dual-role mode requires USB Gadget support to be enabled" + +config USB_DWC2_PERIPHERAL + bool "Gadget only mode" + depends on USB_GADGET=y || USB_GADGET=USB_DWC2 + help + The Designware USB2.0 high-speed gadget controller + integrated into many SoCs. Select this option if you want the + driver to operate in Peripheral-only mode. This option requires + USB_GADGET to be enabled. + +config USB_DWC2_DUAL_ROLE + bool "Dual Role mode" + depends on (USB=y && USB_GADGET=y) || (USB_DWC2=m && USB && USB_GADGET) + help + Select this option if you want the driver to work in a dual-role + mode. In this mode both host and gadget features are enabled, and + the role will be determined by the cable that gets plugged-in. This + option requires USB_GADGET to be enabled. +endchoice + +config USB_DWC2_PCI + tristate "DWC2 PCI" + depends on USB_PCI + depends on USB_GADGET || !USB_GADGET + select NOP_USB_XCEIV + help + The Designware USB2.0 PCI interface module for controllers + connected to a PCI bus. + +config USB_DWC2_DEBUG + bool "Enable Debugging Messages" + help + Say Y here to enable debugging messages in the DWC2 Driver. + +config USB_DWC2_VERBOSE + bool "Enable Verbose Debugging Messages" + depends on USB_DWC2_DEBUG + help + Say Y here to enable verbose debugging messages in the DWC2 Driver. + WARNING: Enabling this will quickly fill your message log. + If in doubt, say N. + +config USB_DWC2_TRACK_MISSED_SOFS + bool "Enable Missed SOF Tracking" + help + Say Y here to enable logging of missed SOF events to the dmesg log. + WARNING: This feature is still experimental. + If in doubt, say N. + +config USB_DWC2_DEBUG_PERIODIC + bool "Enable Debugging Messages For Periodic Transfers" + depends on USB_DWC2_DEBUG || USB_DWC2_VERBOSE + default y + help + Say N here to disable (verbose) debugging messages to be + logged for periodic transfers. This allows better debugging of + non-periodic transfers, but of course the debug logs will be + incomplete. Note that this also disables some debug messages + for which the transfer type cannot be deduced. +endif diff --git a/drivers/usb/dwc2/Makefile b/drivers/usb/dwc2/Makefile new file mode 100644 index 0000000000..2bcd6945df --- /dev/null +++ b/drivers/usb/dwc2/Makefile @@ -0,0 +1,29 @@ +# SPDX-License-Identifier: GPL-2.0 +ccflags-$(CONFIG_USB_DWC2_DEBUG) += -DDEBUG +ccflags-$(CONFIG_USB_DWC2_VERBOSE) += -DVERBOSE_DEBUG + +obj-$(CONFIG_USB_DWC2) += dwc2.o +dwc2-y := core.o core_intr.o platform.o drd.o +dwc2-y += params.o + +ifneq ($(filter y,$(CONFIG_USB_DWC2_HOST) $(CONFIG_USB_DWC2_DUAL_ROLE)),) + dwc2-y += hcd.o hcd_intr.o + dwc2-y += hcd_queue.o hcd_ddma.o +endif + +ifneq ($(filter y,$(CONFIG_USB_DWC2_PERIPHERAL) $(CONFIG_USB_DWC2_DUAL_ROLE)),) + dwc2-y += gadget.o +endif + +ifneq ($(CONFIG_DEBUG_FS),) + dwc2-y += debugfs.o +endif + +# NOTE: The previous s3c-hsotg peripheral mode only driver has been moved to +# this location and renamed gadget.c. When building for dynamically linked +# modules, dwc2.ko will get built for host mode, peripheral mode, and dual-role +# mode. The PCI bus interface module will called dwc2_pci.ko and the platform +# interface module will be called dwc2_platform.ko. + +obj-$(CONFIG_USB_DWC2_PCI) += dwc2_pci.o +dwc2_pci-y := pci.o diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c new file mode 100644 index 0000000000..5635e4d7ec --- /dev/null +++ b/drivers/usb/dwc2/core.c @@ -0,0 +1,1174 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * core.c - DesignWare HS OTG Controller common routines + * + * Copyright (C) 2004-2013 Synopsys, Inc. + */ + +/* + * The Core code provides basic services for accessing and managing the + * DWC_otg hardware. These services are used by both the Host Controller + * Driver and the Peripheral Controller Driver. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/usb.h> + +#include <linux/usb/hcd.h> +#include <linux/usb/ch11.h> + +#include "core.h" +#include "hcd.h" + +/** + * dwc2_backup_global_registers() - Backup global controller registers. + * When suspending usb bus, registers needs to be backuped + * if controller power is disabled once suspended. + * + * @hsotg: Programming view of the DWC_otg controller + */ +int dwc2_backup_global_registers(struct dwc2_hsotg *hsotg) +{ + struct dwc2_gregs_backup *gr; + + dev_dbg(hsotg->dev, "%s\n", __func__); + + /* Backup global regs */ + gr = &hsotg->gr_backup; + + gr->gotgctl = dwc2_readl(hsotg, GOTGCTL); + gr->gintmsk = dwc2_readl(hsotg, GINTMSK); + gr->gahbcfg = dwc2_readl(hsotg, GAHBCFG); + gr->gusbcfg = dwc2_readl(hsotg, GUSBCFG); + gr->grxfsiz = dwc2_readl(hsotg, GRXFSIZ); + gr->gnptxfsiz = dwc2_readl(hsotg, GNPTXFSIZ); + gr->gdfifocfg = dwc2_readl(hsotg, GDFIFOCFG); + gr->pcgcctl1 = dwc2_readl(hsotg, PCGCCTL1); + gr->glpmcfg = dwc2_readl(hsotg, GLPMCFG); + gr->gi2cctl = dwc2_readl(hsotg, GI2CCTL); + gr->pcgcctl = dwc2_readl(hsotg, PCGCTL); + + gr->valid = true; + return 0; +} + +/** + * dwc2_restore_global_registers() - Restore controller global registers. + * When resuming usb bus, device registers needs to be restored + * if controller power were disabled. + * + * @hsotg: Programming view of the DWC_otg controller + */ +int dwc2_restore_global_registers(struct dwc2_hsotg *hsotg) +{ + struct dwc2_gregs_backup *gr; + + dev_dbg(hsotg->dev, "%s\n", __func__); + + /* Restore global regs */ + gr = &hsotg->gr_backup; + if (!gr->valid) { + dev_err(hsotg->dev, "%s: no global registers to restore\n", + __func__); + return -EINVAL; + } + gr->valid = false; + + dwc2_writel(hsotg, 0xffffffff, GINTSTS); + dwc2_writel(hsotg, gr->gotgctl, GOTGCTL); + dwc2_writel(hsotg, gr->gintmsk, GINTMSK); + dwc2_writel(hsotg, gr->gusbcfg, GUSBCFG); + dwc2_writel(hsotg, gr->gahbcfg, GAHBCFG); + dwc2_writel(hsotg, gr->grxfsiz, GRXFSIZ); + dwc2_writel(hsotg, gr->gnptxfsiz, GNPTXFSIZ); + dwc2_writel(hsotg, gr->gdfifocfg, GDFIFOCFG); + dwc2_writel(hsotg, gr->pcgcctl1, PCGCCTL1); + dwc2_writel(hsotg, gr->glpmcfg, GLPMCFG); + dwc2_writel(hsotg, gr->pcgcctl, PCGCTL); + dwc2_writel(hsotg, gr->gi2cctl, GI2CCTL); + + return 0; +} + +/** + * dwc2_exit_partial_power_down() - Exit controller from Partial Power Down. + * + * @hsotg: Programming view of the DWC_otg controller + * @rem_wakeup: indicates whether resume is initiated by Reset. + * @restore: Controller registers need to be restored + */ +int dwc2_exit_partial_power_down(struct dwc2_hsotg *hsotg, int rem_wakeup, + bool restore) +{ + struct dwc2_gregs_backup *gr; + + gr = &hsotg->gr_backup; + + /* + * Restore host or device regisers with the same mode core enterted + * to partial power down by checking "GOTGCTL_CURMODE_HOST" backup + * value of the "gotgctl" register. + */ + if (gr->gotgctl & GOTGCTL_CURMODE_HOST) + return dwc2_host_exit_partial_power_down(hsotg, rem_wakeup, + restore); + else + return dwc2_gadget_exit_partial_power_down(hsotg, restore); +} + +/** + * dwc2_enter_partial_power_down() - Put controller in Partial Power Down. + * + * @hsotg: Programming view of the DWC_otg controller + */ +int dwc2_enter_partial_power_down(struct dwc2_hsotg *hsotg) +{ + if (dwc2_is_host_mode(hsotg)) + return dwc2_host_enter_partial_power_down(hsotg); + else + return dwc2_gadget_enter_partial_power_down(hsotg); +} + +/** + * dwc2_restore_essential_regs() - Restore essiential regs of core. + * + * @hsotg: Programming view of the DWC_otg controller + * @rmode: Restore mode, enabled in case of remote-wakeup. + * @is_host: Host or device mode. + */ +static void dwc2_restore_essential_regs(struct dwc2_hsotg *hsotg, int rmode, + int is_host) +{ + u32 pcgcctl; + struct dwc2_gregs_backup *gr; + struct dwc2_dregs_backup *dr; + struct dwc2_hregs_backup *hr; + + gr = &hsotg->gr_backup; + dr = &hsotg->dr_backup; + hr = &hsotg->hr_backup; + + dev_dbg(hsotg->dev, "%s: restoring essential regs\n", __func__); + + /* Load restore values for [31:14] bits */ + pcgcctl = (gr->pcgcctl & 0xffffc000); + /* If High Speed */ + if (is_host) { + if (!(pcgcctl & PCGCTL_P2HD_PRT_SPD_MASK)) + pcgcctl |= BIT(17); + } else { + if (!(pcgcctl & PCGCTL_P2HD_DEV_ENUM_SPD_MASK)) + pcgcctl |= BIT(17); + } + dwc2_writel(hsotg, pcgcctl, PCGCTL); + + /* Umnask global Interrupt in GAHBCFG and restore it */ + dwc2_writel(hsotg, gr->gahbcfg | GAHBCFG_GLBL_INTR_EN, GAHBCFG); + + /* Clear all pending interupts */ + dwc2_writel(hsotg, 0xffffffff, GINTSTS); + + /* Unmask restore done interrupt */ + dwc2_writel(hsotg, GINTSTS_RESTOREDONE, GINTMSK); + + /* Restore GUSBCFG and HCFG/DCFG */ + dwc2_writel(hsotg, gr->gusbcfg, GUSBCFG); + + if (is_host) { + dwc2_writel(hsotg, hr->hcfg, HCFG); + if (rmode) + pcgcctl |= PCGCTL_RESTOREMODE; + dwc2_writel(hsotg, pcgcctl, PCGCTL); + udelay(10); + + pcgcctl |= PCGCTL_ESS_REG_RESTORED; + dwc2_writel(hsotg, pcgcctl, PCGCTL); + udelay(10); + } else { + dwc2_writel(hsotg, dr->dcfg, DCFG); + if (!rmode) + pcgcctl |= PCGCTL_RESTOREMODE | PCGCTL_RSTPDWNMODULE; + dwc2_writel(hsotg, pcgcctl, PCGCTL); + udelay(10); + + pcgcctl |= PCGCTL_ESS_REG_RESTORED; + dwc2_writel(hsotg, pcgcctl, PCGCTL); + udelay(10); + } +} + +/** + * dwc2_hib_restore_common() - Common part of restore routine. + * + * @hsotg: Programming view of the DWC_otg controller + * @rem_wakeup: Remote-wakeup, enabled in case of remote-wakeup. + * @is_host: Host or device mode. + */ +void dwc2_hib_restore_common(struct dwc2_hsotg *hsotg, int rem_wakeup, + int is_host) +{ + u32 gpwrdn; + + /* Switch-on voltage to the core */ + gpwrdn = dwc2_readl(hsotg, GPWRDN); + gpwrdn &= ~GPWRDN_PWRDNSWTCH; + dwc2_writel(hsotg, gpwrdn, GPWRDN); + udelay(10); + + /* Reset core */ + gpwrdn = dwc2_readl(hsotg, GPWRDN); + gpwrdn &= ~GPWRDN_PWRDNRSTN; + dwc2_writel(hsotg, gpwrdn, GPWRDN); + udelay(10); + + /* Enable restore from PMU */ + gpwrdn = dwc2_readl(hsotg, GPWRDN); + gpwrdn |= GPWRDN_RESTORE; + dwc2_writel(hsotg, gpwrdn, GPWRDN); + udelay(10); + + /* Disable Power Down Clamp */ + gpwrdn = dwc2_readl(hsotg, GPWRDN); + gpwrdn &= ~GPWRDN_PWRDNCLMP; + dwc2_writel(hsotg, gpwrdn, GPWRDN); + udelay(50); + + if (!is_host && rem_wakeup) + udelay(70); + + /* Deassert reset core */ + gpwrdn = dwc2_readl(hsotg, GPWRDN); + gpwrdn |= GPWRDN_PWRDNRSTN; + dwc2_writel(hsotg, gpwrdn, GPWRDN); + udelay(10); + + /* Disable PMU interrupt */ + gpwrdn = dwc2_readl(hsotg, GPWRDN); + gpwrdn &= ~GPWRDN_PMUINTSEL; + dwc2_writel(hsotg, gpwrdn, GPWRDN); + udelay(10); + + /* Set Restore Essential Regs bit in PCGCCTL register */ + dwc2_restore_essential_regs(hsotg, rem_wakeup, is_host); + + /* + * Wait For Restore_done Interrupt. This mechanism of polling the + * interrupt is introduced to avoid any possible race conditions + */ + if (dwc2_hsotg_wait_bit_set(hsotg, GINTSTS, GINTSTS_RESTOREDONE, + 20000)) { + dev_dbg(hsotg->dev, + "%s: Restore Done wasn't generated here\n", + __func__); + } else { + dev_dbg(hsotg->dev, "restore done generated here\n"); + + /* + * To avoid restore done interrupt storm after restore is + * generated clear GINTSTS_RESTOREDONE bit. + */ + dwc2_writel(hsotg, GINTSTS_RESTOREDONE, GINTSTS); + } +} + +/** + * dwc2_wait_for_mode() - Waits for the controller mode. + * @hsotg: Programming view of the DWC_otg controller. + * @host_mode: If true, waits for host mode, otherwise device mode. + */ +static void dwc2_wait_for_mode(struct dwc2_hsotg *hsotg, + bool host_mode) +{ + ktime_t start; + ktime_t end; + unsigned int timeout = 110; + + dev_vdbg(hsotg->dev, "Waiting for %s mode\n", + host_mode ? "host" : "device"); + + start = ktime_get(); + + while (1) { + s64 ms; + + if (dwc2_is_host_mode(hsotg) == host_mode) { + dev_vdbg(hsotg->dev, "%s mode set\n", + host_mode ? "Host" : "Device"); + break; + } + + end = ktime_get(); + ms = ktime_to_ms(ktime_sub(end, start)); + + if (ms >= (s64)timeout) { + dev_warn(hsotg->dev, "%s: Couldn't set %s mode\n", + __func__, host_mode ? "host" : "device"); + break; + } + + usleep_range(1000, 2000); + } +} + +/** + * dwc2_iddig_filter_enabled() - Returns true if the IDDIG debounce + * filter is enabled. + * + * @hsotg: Programming view of DWC_otg controller + */ +static bool dwc2_iddig_filter_enabled(struct dwc2_hsotg *hsotg) +{ + u32 gsnpsid; + u32 ghwcfg4; + + if (!dwc2_hw_is_otg(hsotg)) + return false; + + /* Check if core configuration includes the IDDIG filter. */ + ghwcfg4 = dwc2_readl(hsotg, GHWCFG4); + if (!(ghwcfg4 & GHWCFG4_IDDIG_FILT_EN)) + return false; + + /* + * Check if the IDDIG debounce filter is bypassed. Available + * in core version >= 3.10a. + */ + gsnpsid = dwc2_readl(hsotg, GSNPSID); + if (gsnpsid >= DWC2_CORE_REV_3_10a) { + u32 gotgctl = dwc2_readl(hsotg, GOTGCTL); + + if (gotgctl & GOTGCTL_DBNCE_FLTR_BYPASS) + return false; + } + + return true; +} + +/* + * dwc2_enter_hibernation() - Common function to enter hibernation. + * + * @hsotg: Programming view of the DWC_otg controller + * @is_host: True if core is in host mode. + * + * Return: 0 if successful, negative error code otherwise + */ +int dwc2_enter_hibernation(struct dwc2_hsotg *hsotg, int is_host) +{ + if (is_host) + return dwc2_host_enter_hibernation(hsotg); + else + return dwc2_gadget_enter_hibernation(hsotg); +} + +/* + * dwc2_exit_hibernation() - Common function to exit from hibernation. + * + * @hsotg: Programming view of the DWC_otg controller + * @rem_wakeup: Remote-wakeup, enabled in case of remote-wakeup. + * @reset: Enabled in case of restore with reset. + * @is_host: True if core is in host mode. + * + * Return: 0 if successful, negative error code otherwise + */ +int dwc2_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup, + int reset, int is_host) +{ + if (is_host) + return dwc2_host_exit_hibernation(hsotg, rem_wakeup, reset); + else + return dwc2_gadget_exit_hibernation(hsotg, rem_wakeup, reset); +} + +/* + * Do core a soft reset of the core. Be careful with this because it + * resets all the internal state machines of the core. + */ +int dwc2_core_reset(struct dwc2_hsotg *hsotg, bool skip_wait) +{ + u32 greset; + bool wait_for_host_mode = false; + + dev_vdbg(hsotg->dev, "%s()\n", __func__); + + /* + * If the current mode is host, either due to the force mode + * bit being set (which persists after core reset) or the + * connector id pin, a core soft reset will temporarily reset + * the mode to device. A delay from the IDDIG debounce filter + * will occur before going back to host mode. + * + * Determine whether we will go back into host mode after a + * reset and account for this delay after the reset. + */ + if (dwc2_iddig_filter_enabled(hsotg)) { + u32 gotgctl = dwc2_readl(hsotg, GOTGCTL); + u32 gusbcfg = dwc2_readl(hsotg, GUSBCFG); + + if (!(gotgctl & GOTGCTL_CONID_B) || + (gusbcfg & GUSBCFG_FORCEHOSTMODE)) { + wait_for_host_mode = true; + } + } + + /* Core Soft Reset */ + greset = dwc2_readl(hsotg, GRSTCTL); + greset |= GRSTCTL_CSFTRST; + dwc2_writel(hsotg, greset, GRSTCTL); + + if ((hsotg->hw_params.snpsid & DWC2_CORE_REV_MASK) < + (DWC2_CORE_REV_4_20a & DWC2_CORE_REV_MASK)) { + if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL, + GRSTCTL_CSFTRST, 10000)) { + dev_warn(hsotg->dev, "%s: HANG! Soft Reset timeout GRSTCTL_CSFTRST\n", + __func__); + return -EBUSY; + } + } else { + if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, + GRSTCTL_CSFTRST_DONE, 10000)) { + dev_warn(hsotg->dev, "%s: HANG! Soft Reset timeout GRSTCTL_CSFTRST_DONE\n", + __func__); + return -EBUSY; + } + greset = dwc2_readl(hsotg, GRSTCTL); + greset &= ~GRSTCTL_CSFTRST; + greset |= GRSTCTL_CSFTRST_DONE; + dwc2_writel(hsotg, greset, GRSTCTL); + } + + /* + * Switching from device mode to host mode by disconnecting + * device cable core enters and exits form hibernation. + * However, the fifo map remains not cleared. It results + * to a WARNING (WARNING: CPU: 5 PID: 0 at drivers/usb/dwc2/ + * gadget.c:307 dwc2_hsotg_init_fifo+0x12/0x152 [dwc2]) + * if in host mode we disconnect the micro a to b host + * cable. Because core reset occurs. + * To avoid the WARNING, fifo_map should be cleared + * in dwc2_core_reset() function by taking into account configs. + * fifo_map must be cleared only if driver is configured in + * "CONFIG_USB_DWC2_PERIPHERAL" or "CONFIG_USB_DWC2_DUAL_ROLE" + * mode. + */ + dwc2_clear_fifo_map(hsotg); + + /* Wait for AHB master IDLE state */ + if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 10000)) { + dev_warn(hsotg->dev, "%s: HANG! AHB Idle timeout GRSTCTL GRSTCTL_AHBIDLE\n", + __func__); + return -EBUSY; + } + + if (wait_for_host_mode && !skip_wait) + dwc2_wait_for_mode(hsotg, true); + + return 0; +} + +/** + * dwc2_force_mode() - Force the mode of the controller. + * + * Forcing the mode is needed for two cases: + * + * 1) If the dr_mode is set to either HOST or PERIPHERAL we force the + * controller to stay in a particular mode regardless of ID pin + * changes. We do this once during probe. + * + * 2) During probe we want to read reset values of the hw + * configuration registers that are only available in either host or + * device mode. We may need to force the mode if the current mode does + * not allow us to access the register in the mode that we want. + * + * In either case it only makes sense to force the mode if the + * controller hardware is OTG capable. + * + * Checks are done in this function to determine whether doing a force + * would be valid or not. + * + * If a force is done, it requires a IDDIG debounce filter delay if + * the filter is configured and enabled. We poll the current mode of + * the controller to account for this delay. + * + * @hsotg: Programming view of DWC_otg controller + * @host: Host mode flag + */ +void dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host) +{ + u32 gusbcfg; + u32 set; + u32 clear; + + dev_dbg(hsotg->dev, "Forcing mode to %s\n", host ? "host" : "device"); + + /* + * Force mode has no effect if the hardware is not OTG. + */ + if (!dwc2_hw_is_otg(hsotg)) + return; + + /* + * If dr_mode is either peripheral or host only, there is no + * need to ever force the mode to the opposite mode. + */ + if (WARN_ON(host && hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)) + return; + + if (WARN_ON(!host && hsotg->dr_mode == USB_DR_MODE_HOST)) + return; + + gusbcfg = dwc2_readl(hsotg, GUSBCFG); + + set = host ? GUSBCFG_FORCEHOSTMODE : GUSBCFG_FORCEDEVMODE; + clear = host ? GUSBCFG_FORCEDEVMODE : GUSBCFG_FORCEHOSTMODE; + + gusbcfg &= ~clear; + gusbcfg |= set; + dwc2_writel(hsotg, gusbcfg, GUSBCFG); + + dwc2_wait_for_mode(hsotg, host); + return; +} + +/** + * dwc2_clear_force_mode() - Clears the force mode bits. + * + * After clearing the bits, wait up to 100 ms to account for any + * potential IDDIG filter delay. We can't know if we expect this delay + * or not because the value of the connector ID status is affected by + * the force mode. We only need to call this once during probe if + * dr_mode == OTG. + * + * @hsotg: Programming view of DWC_otg controller + */ +static void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg) +{ + u32 gusbcfg; + + if (!dwc2_hw_is_otg(hsotg)) + return; + + dev_dbg(hsotg->dev, "Clearing force mode bits\n"); + + gusbcfg = dwc2_readl(hsotg, GUSBCFG); + gusbcfg &= ~GUSBCFG_FORCEHOSTMODE; + gusbcfg &= ~GUSBCFG_FORCEDEVMODE; + dwc2_writel(hsotg, gusbcfg, GUSBCFG); + + if (dwc2_iddig_filter_enabled(hsotg)) + msleep(100); +} + +/* + * Sets or clears force mode based on the dr_mode parameter. + */ +void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg) +{ + switch (hsotg->dr_mode) { + case USB_DR_MODE_HOST: + /* + * NOTE: This is required for some rockchip soc based + * platforms on their host-only dwc2. + */ + if (!dwc2_hw_is_otg(hsotg)) + msleep(50); + + break; + case USB_DR_MODE_PERIPHERAL: + dwc2_force_mode(hsotg, false); + break; + case USB_DR_MODE_OTG: + dwc2_clear_force_mode(hsotg); + break; + default: + dev_warn(hsotg->dev, "%s() Invalid dr_mode=%d\n", + __func__, hsotg->dr_mode); + break; + } +} + +/* + * dwc2_enable_acg - enable active clock gating feature + */ +void dwc2_enable_acg(struct dwc2_hsotg *hsotg) +{ + if (hsotg->params.acg_enable) { + u32 pcgcctl1 = dwc2_readl(hsotg, PCGCCTL1); + + dev_dbg(hsotg->dev, "Enabling Active Clock Gating\n"); + pcgcctl1 |= PCGCCTL1_GATEEN; + dwc2_writel(hsotg, pcgcctl1, PCGCCTL1); + } +} + +/** + * dwc2_dump_host_registers() - Prints the host registers + * + * @hsotg: Programming view of DWC_otg controller + * + * NOTE: This function will be removed once the peripheral controller code + * is integrated and the driver is stable + */ +void dwc2_dump_host_registers(struct dwc2_hsotg *hsotg) +{ +#ifdef DEBUG + u32 __iomem *addr; + int i; + + dev_dbg(hsotg->dev, "Host Global Registers\n"); + addr = hsotg->regs + HCFG; + dev_dbg(hsotg->dev, "HCFG @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, HCFG)); + addr = hsotg->regs + HFIR; + dev_dbg(hsotg->dev, "HFIR @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, HFIR)); + addr = hsotg->regs + HFNUM; + dev_dbg(hsotg->dev, "HFNUM @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, HFNUM)); + addr = hsotg->regs + HPTXSTS; + dev_dbg(hsotg->dev, "HPTXSTS @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, HPTXSTS)); + addr = hsotg->regs + HAINT; + dev_dbg(hsotg->dev, "HAINT @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, HAINT)); + addr = hsotg->regs + HAINTMSK; + dev_dbg(hsotg->dev, "HAINTMSK @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, HAINTMSK)); + if (hsotg->params.dma_desc_enable) { + addr = hsotg->regs + HFLBADDR; + dev_dbg(hsotg->dev, "HFLBADDR @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, HFLBADDR)); + } + + addr = hsotg->regs + HPRT0; + dev_dbg(hsotg->dev, "HPRT0 @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, HPRT0)); + + for (i = 0; i < hsotg->params.host_channels; i++) { + dev_dbg(hsotg->dev, "Host Channel %d Specific Registers\n", i); + addr = hsotg->regs + HCCHAR(i); + dev_dbg(hsotg->dev, "HCCHAR @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, HCCHAR(i))); + addr = hsotg->regs + HCSPLT(i); + dev_dbg(hsotg->dev, "HCSPLT @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, HCSPLT(i))); + addr = hsotg->regs + HCINT(i); + dev_dbg(hsotg->dev, "HCINT @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, HCINT(i))); + addr = hsotg->regs + HCINTMSK(i); + dev_dbg(hsotg->dev, "HCINTMSK @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, HCINTMSK(i))); + addr = hsotg->regs + HCTSIZ(i); + dev_dbg(hsotg->dev, "HCTSIZ @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, HCTSIZ(i))); + addr = hsotg->regs + HCDMA(i); + dev_dbg(hsotg->dev, "HCDMA @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, HCDMA(i))); + if (hsotg->params.dma_desc_enable) { + addr = hsotg->regs + HCDMAB(i); + dev_dbg(hsotg->dev, "HCDMAB @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, + HCDMAB(i))); + } + } +#endif +} + +/** + * dwc2_dump_global_registers() - Prints the core global registers + * + * @hsotg: Programming view of DWC_otg controller + * + * NOTE: This function will be removed once the peripheral controller code + * is integrated and the driver is stable + */ +void dwc2_dump_global_registers(struct dwc2_hsotg *hsotg) +{ +#ifdef DEBUG + u32 __iomem *addr; + + dev_dbg(hsotg->dev, "Core Global Registers\n"); + addr = hsotg->regs + GOTGCTL; + dev_dbg(hsotg->dev, "GOTGCTL @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, GOTGCTL)); + addr = hsotg->regs + GOTGINT; + dev_dbg(hsotg->dev, "GOTGINT @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, GOTGINT)); + addr = hsotg->regs + GAHBCFG; + dev_dbg(hsotg->dev, "GAHBCFG @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, GAHBCFG)); + addr = hsotg->regs + GUSBCFG; + dev_dbg(hsotg->dev, "GUSBCFG @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, GUSBCFG)); + addr = hsotg->regs + GRSTCTL; + dev_dbg(hsotg->dev, "GRSTCTL @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, GRSTCTL)); + addr = hsotg->regs + GINTSTS; + dev_dbg(hsotg->dev, "GINTSTS @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, GINTSTS)); + addr = hsotg->regs + GINTMSK; + dev_dbg(hsotg->dev, "GINTMSK @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, GINTMSK)); + addr = hsotg->regs + GRXSTSR; + dev_dbg(hsotg->dev, "GRXSTSR @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, GRXSTSR)); + addr = hsotg->regs + GRXFSIZ; + dev_dbg(hsotg->dev, "GRXFSIZ @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, GRXFSIZ)); + addr = hsotg->regs + GNPTXFSIZ; + dev_dbg(hsotg->dev, "GNPTXFSIZ @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, GNPTXFSIZ)); + addr = hsotg->regs + GNPTXSTS; + dev_dbg(hsotg->dev, "GNPTXSTS @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, GNPTXSTS)); + addr = hsotg->regs + GI2CCTL; + dev_dbg(hsotg->dev, "GI2CCTL @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, GI2CCTL)); + addr = hsotg->regs + GPVNDCTL; + dev_dbg(hsotg->dev, "GPVNDCTL @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, GPVNDCTL)); + addr = hsotg->regs + GGPIO; + dev_dbg(hsotg->dev, "GGPIO @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, GGPIO)); + addr = hsotg->regs + GUID; + dev_dbg(hsotg->dev, "GUID @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, GUID)); + addr = hsotg->regs + GSNPSID; + dev_dbg(hsotg->dev, "GSNPSID @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, GSNPSID)); + addr = hsotg->regs + GHWCFG1; + dev_dbg(hsotg->dev, "GHWCFG1 @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, GHWCFG1)); + addr = hsotg->regs + GHWCFG2; + dev_dbg(hsotg->dev, "GHWCFG2 @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, GHWCFG2)); + addr = hsotg->regs + GHWCFG3; + dev_dbg(hsotg->dev, "GHWCFG3 @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, GHWCFG3)); + addr = hsotg->regs + GHWCFG4; + dev_dbg(hsotg->dev, "GHWCFG4 @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, GHWCFG4)); + addr = hsotg->regs + GLPMCFG; + dev_dbg(hsotg->dev, "GLPMCFG @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, GLPMCFG)); + addr = hsotg->regs + GPWRDN; + dev_dbg(hsotg->dev, "GPWRDN @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, GPWRDN)); + addr = hsotg->regs + GDFIFOCFG; + dev_dbg(hsotg->dev, "GDFIFOCFG @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, GDFIFOCFG)); + addr = hsotg->regs + HPTXFSIZ; + dev_dbg(hsotg->dev, "HPTXFSIZ @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, HPTXFSIZ)); + + addr = hsotg->regs + PCGCTL; + dev_dbg(hsotg->dev, "PCGCTL @0x%08lX : 0x%08X\n", + (unsigned long)addr, dwc2_readl(hsotg, PCGCTL)); +#endif +} + +/** + * dwc2_flush_tx_fifo() - Flushes a Tx FIFO + * + * @hsotg: Programming view of DWC_otg controller + * @num: Tx FIFO to flush + */ +void dwc2_flush_tx_fifo(struct dwc2_hsotg *hsotg, const int num) +{ + u32 greset; + + dev_vdbg(hsotg->dev, "Flush Tx FIFO %d\n", num); + + /* Wait for AHB master IDLE state */ + if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 10000)) + dev_warn(hsotg->dev, "%s: HANG! AHB Idle GRSCTL\n", + __func__); + + greset = GRSTCTL_TXFFLSH; + greset |= num << GRSTCTL_TXFNUM_SHIFT & GRSTCTL_TXFNUM_MASK; + dwc2_writel(hsotg, greset, GRSTCTL); + + if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL, GRSTCTL_TXFFLSH, 10000)) + dev_warn(hsotg->dev, "%s: HANG! timeout GRSTCTL GRSTCTL_TXFFLSH\n", + __func__); + + /* Wait for at least 3 PHY Clocks */ + udelay(1); +} + +/** + * dwc2_flush_rx_fifo() - Flushes the Rx FIFO + * + * @hsotg: Programming view of DWC_otg controller + */ +void dwc2_flush_rx_fifo(struct dwc2_hsotg *hsotg) +{ + u32 greset; + + dev_vdbg(hsotg->dev, "%s()\n", __func__); + + /* Wait for AHB master IDLE state */ + if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 10000)) + dev_warn(hsotg->dev, "%s: HANG! AHB Idle GRSCTL\n", + __func__); + + greset = GRSTCTL_RXFFLSH; + dwc2_writel(hsotg, greset, GRSTCTL); + + /* Wait for RxFIFO flush done */ + if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL, GRSTCTL_RXFFLSH, 10000)) + dev_warn(hsotg->dev, "%s: HANG! timeout GRSTCTL GRSTCTL_RXFFLSH\n", + __func__); + + /* Wait for at least 3 PHY Clocks */ + udelay(1); +} + +bool dwc2_is_controller_alive(struct dwc2_hsotg *hsotg) +{ + if (dwc2_readl(hsotg, GSNPSID) == 0xffffffff) + return false; + else + return true; +} + +/** + * dwc2_enable_global_interrupts() - Enables the controller's Global + * Interrupt in the AHB Config register + * + * @hsotg: Programming view of DWC_otg controller + */ +void dwc2_enable_global_interrupts(struct dwc2_hsotg *hsotg) +{ + u32 ahbcfg = dwc2_readl(hsotg, GAHBCFG); + + ahbcfg |= GAHBCFG_GLBL_INTR_EN; + dwc2_writel(hsotg, ahbcfg, GAHBCFG); +} + +/** + * dwc2_disable_global_interrupts() - Disables the controller's Global + * Interrupt in the AHB Config register + * + * @hsotg: Programming view of DWC_otg controller + */ +void dwc2_disable_global_interrupts(struct dwc2_hsotg *hsotg) +{ + u32 ahbcfg = dwc2_readl(hsotg, GAHBCFG); + + ahbcfg &= ~GAHBCFG_GLBL_INTR_EN; + dwc2_writel(hsotg, ahbcfg, GAHBCFG); +} + +/* Returns the controller's GHWCFG2.OTG_MODE. */ +unsigned int dwc2_op_mode(struct dwc2_hsotg *hsotg) +{ + u32 ghwcfg2 = dwc2_readl(hsotg, GHWCFG2); + + return (ghwcfg2 & GHWCFG2_OP_MODE_MASK) >> + GHWCFG2_OP_MODE_SHIFT; +} + +/* Returns true if the controller is capable of DRD. */ +bool dwc2_hw_is_otg(struct dwc2_hsotg *hsotg) +{ + unsigned int op_mode = dwc2_op_mode(hsotg); + + return (op_mode == GHWCFG2_OP_MODE_HNP_SRP_CAPABLE) || + (op_mode == GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE) || + (op_mode == GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE); +} + +/* Returns true if the controller is host-only. */ +bool dwc2_hw_is_host(struct dwc2_hsotg *hsotg) +{ + unsigned int op_mode = dwc2_op_mode(hsotg); + + return (op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_HOST) || + (op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST); +} + +/* Returns true if the controller is device-only. */ +bool dwc2_hw_is_device(struct dwc2_hsotg *hsotg) +{ + unsigned int op_mode = dwc2_op_mode(hsotg); + + return (op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) || + (op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE); +} + +/** + * dwc2_hsotg_wait_bit_set - Waits for bit to be set. + * @hsotg: Programming view of DWC_otg controller. + * @offset: Register's offset where bit/bits must be set. + * @mask: Mask of the bit/bits which must be set. + * @timeout: Timeout to wait. + * + * Return: 0 if bit/bits are set or -ETIMEDOUT in case of timeout. + */ +int dwc2_hsotg_wait_bit_set(struct dwc2_hsotg *hsotg, u32 offset, u32 mask, + u32 timeout) +{ + u32 i; + + for (i = 0; i < timeout; i++) { + if (dwc2_readl(hsotg, offset) & mask) + return 0; + udelay(1); + } + + return -ETIMEDOUT; +} + +/** + * dwc2_hsotg_wait_bit_clear - Waits for bit to be clear. + * @hsotg: Programming view of DWC_otg controller. + * @offset: Register's offset where bit/bits must be set. + * @mask: Mask of the bit/bits which must be set. + * @timeout: Timeout to wait. + * + * Return: 0 if bit/bits are set or -ETIMEDOUT in case of timeout. + */ +int dwc2_hsotg_wait_bit_clear(struct dwc2_hsotg *hsotg, u32 offset, u32 mask, + u32 timeout) +{ + u32 i; + + for (i = 0; i < timeout; i++) { + if (!(dwc2_readl(hsotg, offset) & mask)) + return 0; + udelay(1); + } + + return -ETIMEDOUT; +} + +/* + * Initializes the FSLSPClkSel field of the HCFG register depending on the + * PHY type + */ +void dwc2_init_fs_ls_pclk_sel(struct dwc2_hsotg *hsotg) +{ + u32 hcfg, val; + + if ((hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI && + hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED && + hsotg->params.ulpi_fs_ls) || + hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS) { + /* Full speed PHY */ + val = HCFG_FSLSPCLKSEL_48_MHZ; + } else { + /* High speed PHY running at full speed or high speed */ + val = HCFG_FSLSPCLKSEL_30_60_MHZ; + } + + dev_dbg(hsotg->dev, "Initializing HCFG.FSLSPClkSel to %08x\n", val); + hcfg = dwc2_readl(hsotg, HCFG); + hcfg &= ~HCFG_FSLSPCLKSEL_MASK; + hcfg |= val << HCFG_FSLSPCLKSEL_SHIFT; + dwc2_writel(hsotg, hcfg, HCFG); +} + +static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) +{ + u32 usbcfg, ggpio, i2cctl; + int retval = 0; + + /* + * core_init() is now called on every switch so only call the + * following for the first time through + */ + if (select_phy) { + dev_dbg(hsotg->dev, "FS PHY selected\n"); + + usbcfg = dwc2_readl(hsotg, GUSBCFG); + if (!(usbcfg & GUSBCFG_PHYSEL)) { + usbcfg |= GUSBCFG_PHYSEL; + dwc2_writel(hsotg, usbcfg, GUSBCFG); + + /* Reset after a PHY select */ + retval = dwc2_core_reset(hsotg, false); + + if (retval) { + dev_err(hsotg->dev, + "%s: Reset failed, aborting", __func__); + return retval; + } + } + + if (hsotg->params.activate_stm_fs_transceiver) { + ggpio = dwc2_readl(hsotg, GGPIO); + if (!(ggpio & GGPIO_STM32_OTG_GCCFG_PWRDWN)) { + dev_dbg(hsotg->dev, "Activating transceiver\n"); + /* + * STM32F4x9 uses the GGPIO register as general + * core configuration register. + */ + ggpio |= GGPIO_STM32_OTG_GCCFG_PWRDWN; + dwc2_writel(hsotg, ggpio, GGPIO); + } + } + } + + /* + * Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also + * do this on HNP Dev/Host mode switches (done in dev_init and + * host_init). + */ + if (dwc2_is_host_mode(hsotg)) + dwc2_init_fs_ls_pclk_sel(hsotg); + + if (hsotg->params.i2c_enable) { + dev_dbg(hsotg->dev, "FS PHY enabling I2C\n"); + + /* Program GUSBCFG.OtgUtmiFsSel to I2C */ + usbcfg = dwc2_readl(hsotg, GUSBCFG); + usbcfg |= GUSBCFG_OTG_UTMI_FS_SEL; + dwc2_writel(hsotg, usbcfg, GUSBCFG); + + /* Program GI2CCTL.I2CEn */ + i2cctl = dwc2_readl(hsotg, GI2CCTL); + i2cctl &= ~GI2CCTL_I2CDEVADDR_MASK; + i2cctl |= 1 << GI2CCTL_I2CDEVADDR_SHIFT; + i2cctl &= ~GI2CCTL_I2CEN; + dwc2_writel(hsotg, i2cctl, GI2CCTL); + i2cctl |= GI2CCTL_I2CEN; + dwc2_writel(hsotg, i2cctl, GI2CCTL); + } + + return retval; +} + +static int dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) +{ + u32 usbcfg, usbcfg_old; + int retval = 0; + + if (!select_phy) + return 0; + + usbcfg = dwc2_readl(hsotg, GUSBCFG); + usbcfg_old = usbcfg; + + /* + * HS PHY parameters. These parameters are preserved during soft reset + * so only program the first time. Do a soft reset immediately after + * setting phyif. + */ + switch (hsotg->params.phy_type) { + case DWC2_PHY_TYPE_PARAM_ULPI: + /* ULPI interface */ + dev_dbg(hsotg->dev, "HS ULPI PHY selected\n"); + usbcfg |= GUSBCFG_ULPI_UTMI_SEL; + usbcfg &= ~(GUSBCFG_PHYIF16 | GUSBCFG_DDRSEL); + if (hsotg->params.phy_ulpi_ddr) + usbcfg |= GUSBCFG_DDRSEL; + + /* Set external VBUS indicator as needed. */ + if (hsotg->params.oc_disable) + usbcfg |= (GUSBCFG_ULPI_INT_VBUS_IND | + GUSBCFG_INDICATORPASSTHROUGH); + break; + case DWC2_PHY_TYPE_PARAM_UTMI: + /* UTMI+ interface */ + dev_dbg(hsotg->dev, "HS UTMI+ PHY selected\n"); + usbcfg &= ~(GUSBCFG_ULPI_UTMI_SEL | GUSBCFG_PHYIF16); + if (hsotg->params.phy_utmi_width == 16) + usbcfg |= GUSBCFG_PHYIF16; + break; + default: + dev_err(hsotg->dev, "FS PHY selected at HS!\n"); + break; + } + + if (usbcfg != usbcfg_old) { + dwc2_writel(hsotg, usbcfg, GUSBCFG); + + /* Reset after setting the PHY parameters */ + retval = dwc2_core_reset(hsotg, false); + if (retval) { + dev_err(hsotg->dev, + "%s: Reset failed, aborting", __func__); + return retval; + } + } + + return retval; +} + +static void dwc2_set_turnaround_time(struct dwc2_hsotg *hsotg) +{ + u32 usbcfg; + + if (hsotg->params.phy_type != DWC2_PHY_TYPE_PARAM_UTMI) + return; + + usbcfg = dwc2_readl(hsotg, GUSBCFG); + + usbcfg &= ~GUSBCFG_USBTRDTIM_MASK; + if (hsotg->params.phy_utmi_width == 16) + usbcfg |= 5 << GUSBCFG_USBTRDTIM_SHIFT; + else + usbcfg |= 9 << GUSBCFG_USBTRDTIM_SHIFT; + + dwc2_writel(hsotg, usbcfg, GUSBCFG); +} + +int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) +{ + u32 usbcfg; + u32 otgctl; + int retval = 0; + + if ((hsotg->params.speed == DWC2_SPEED_PARAM_FULL || + hsotg->params.speed == DWC2_SPEED_PARAM_LOW) && + hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS) { + /* If FS/LS mode with FS/LS PHY */ + retval = dwc2_fs_phy_init(hsotg, select_phy); + if (retval) + return retval; + } else { + /* High speed PHY */ + retval = dwc2_hs_phy_init(hsotg, select_phy); + if (retval) + return retval; + + if (dwc2_is_device_mode(hsotg)) + dwc2_set_turnaround_time(hsotg); + } + + if (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI && + hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED && + hsotg->params.ulpi_fs_ls) { + dev_dbg(hsotg->dev, "Setting ULPI FSLS\n"); + usbcfg = dwc2_readl(hsotg, GUSBCFG); + usbcfg |= GUSBCFG_ULPI_FS_LS; + usbcfg |= GUSBCFG_ULPI_CLK_SUSP_M; + dwc2_writel(hsotg, usbcfg, GUSBCFG); + } else { + usbcfg = dwc2_readl(hsotg, GUSBCFG); + usbcfg &= ~GUSBCFG_ULPI_FS_LS; + usbcfg &= ~GUSBCFG_ULPI_CLK_SUSP_M; + dwc2_writel(hsotg, usbcfg, GUSBCFG); + } + + if (!hsotg->params.activate_ingenic_overcurrent_detection) { + if (dwc2_is_host_mode(hsotg)) { + otgctl = readl(hsotg->regs + GOTGCTL); + otgctl |= GOTGCTL_VBVALOEN | GOTGCTL_VBVALOVAL; + writel(otgctl, hsotg->regs + GOTGCTL); + } + } + + return retval; +} + +MODULE_DESCRIPTION("DESIGNWARE HS OTG Core"); +MODULE_AUTHOR("Synopsys, Inc."); +MODULE_LICENSE("Dual BSD/GPL"); diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h new file mode 100644 index 0000000000..c92a1da46a --- /dev/null +++ b/drivers/usb/dwc2/core.h @@ -0,0 +1,1529 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* + * core.h - DesignWare HS OTG Controller common declarations + * + * Copyright (C) 2004-2013 Synopsys, Inc. + */ + +#ifndef __DWC2_CORE_H__ +#define __DWC2_CORE_H__ + +#include <linux/acpi.h> +#include <linux/phy/phy.h> +#include <linux/regulator/consumer.h> +#include <linux/usb/gadget.h> +#include <linux/usb/otg.h> +#include <linux/usb/phy.h> +#include "hw.h" + +/* + * Suggested defines for tracers: + * - no_printk: Disable tracing + * - pr_info: Print this info to the console + * - trace_printk: Print this info to trace buffer (good for verbose logging) + */ + +#define DWC2_TRACE_SCHEDULER no_printk +#define DWC2_TRACE_SCHEDULER_VB no_printk + +/* Detailed scheduler tracing, but won't overwhelm console */ +#define dwc2_sch_dbg(hsotg, fmt, ...) \ + DWC2_TRACE_SCHEDULER(pr_fmt("%s: SCH: " fmt), \ + dev_name(hsotg->dev), ##__VA_ARGS__) + +/* Verbose scheduler tracing */ +#define dwc2_sch_vdbg(hsotg, fmt, ...) \ + DWC2_TRACE_SCHEDULER_VB(pr_fmt("%s: SCH: " fmt), \ + dev_name(hsotg->dev), ##__VA_ARGS__) + +/* Maximum number of Endpoints/HostChannels */ +#define MAX_EPS_CHANNELS 16 + +/* dwc2-hsotg declarations */ +static const char * const dwc2_hsotg_supply_names[] = { + "vusb_d", /* digital USB supply, 1.2V */ + "vusb_a", /* analog USB supply, 1.1V */ +}; + +#define DWC2_NUM_SUPPLIES ARRAY_SIZE(dwc2_hsotg_supply_names) + +/* + * EP0_MPS_LIMIT + * + * Unfortunately there seems to be a limit of the amount of data that can + * be transferred by IN transactions on EP0. This is either 127 bytes or 3 + * packets (which practically means 1 packet and 63 bytes of data) when the + * MPS is set to 64. + * + * This means if we are wanting to move >127 bytes of data, we need to + * split the transactions up, but just doing one packet at a time does + * not work (this may be an implicit DATA0 PID on first packet of the + * transaction) and doing 2 packets is outside the controller's limits. + * + * If we try to lower the MPS size for EP0, then no transfers work properly + * for EP0, and the system will fail basic enumeration. As no cause for this + * has currently been found, we cannot support any large IN transfers for + * EP0. + */ +#define EP0_MPS_LIMIT 64 + +struct dwc2_hsotg; +struct dwc2_hsotg_req; + +/** + * struct dwc2_hsotg_ep - driver endpoint definition. + * @ep: The gadget layer representation of the endpoint. + * @name: The driver generated name for the endpoint. + * @queue: Queue of requests for this endpoint. + * @parent: Reference back to the parent device structure. + * @req: The current request that the endpoint is processing. This is + * used to indicate an request has been loaded onto the endpoint + * and has yet to be completed (maybe due to data move, or simply + * awaiting an ack from the core all the data has been completed). + * @debugfs: File entry for debugfs file for this endpoint. + * @dir_in: Set to true if this endpoint is of the IN direction, which + * means that it is sending data to the Host. + * @map_dir: Set to the value of dir_in when the DMA buffer is mapped. + * @index: The index for the endpoint registers. + * @mc: Multi Count - number of transactions per microframe + * @interval: Interval for periodic endpoints, in frames or microframes. + * @name: The name array passed to the USB core. + * @halted: Set if the endpoint has been halted. + * @periodic: Set if this is a periodic ep, such as Interrupt + * @isochronous: Set if this is a isochronous ep + * @send_zlp: Set if we need to send a zero-length packet. + * @wedged: Set if ep is wedged. + * @desc_list_dma: The DMA address of descriptor chain currently in use. + * @desc_list: Pointer to descriptor DMA chain head currently in use. + * @desc_count: Count of entries within the DMA descriptor chain of EP. + * @next_desc: index of next free descriptor in the ISOC chain under SW control. + * @compl_desc: index of next descriptor to be completed by xFerComplete + * @total_data: The total number of data bytes done. + * @fifo_size: The size of the FIFO (for periodic IN endpoints) + * @fifo_index: For Dedicated FIFO operation, only FIFO0 can be used for EP0. + * @fifo_load: The amount of data loaded into the FIFO (periodic IN) + * @last_load: The offset of data for the last start of request. + * @size_loaded: The last loaded size for DxEPTSIZE for periodic IN + * @target_frame: Targeted frame num to setup next ISOC transfer + * @frame_overrun: Indicates SOF number overrun in DSTS + * + * This is the driver's state for each registered endpoint, allowing it + * to keep track of transactions that need doing. Each endpoint has a + * lock to protect the state, to try and avoid using an overall lock + * for the host controller as much as possible. + * + * For periodic IN endpoints, we have fifo_size and fifo_load to try + * and keep track of the amount of data in the periodic FIFO for each + * of these as we don't have a status register that tells us how much + * is in each of them. (note, this may actually be useless information + * as in shared-fifo mode periodic in acts like a single-frame packet + * buffer than a fifo) + */ +struct dwc2_hsotg_ep { + struct usb_ep ep; + struct list_head queue; + struct dwc2_hsotg *parent; + struct dwc2_hsotg_req *req; + struct dentry *debugfs; + + unsigned long total_data; + unsigned int size_loaded; + unsigned int last_load; + unsigned int fifo_load; + unsigned short fifo_size; + unsigned short fifo_index; + + unsigned char dir_in; + unsigned char map_dir; + unsigned char index; + unsigned char mc; + u16 interval; + + unsigned int halted:1; + unsigned int periodic:1; + unsigned int isochronous:1; + unsigned int send_zlp:1; + unsigned int wedged:1; + unsigned int target_frame; +#define TARGET_FRAME_INITIAL 0xFFFFFFFF + bool frame_overrun; + + dma_addr_t desc_list_dma; + struct dwc2_dma_desc *desc_list; + u8 desc_count; + + unsigned int next_desc; + unsigned int compl_desc; + + char name[10]; +}; + +/** + * struct dwc2_hsotg_req - data transfer request + * @req: The USB gadget request + * @queue: The list of requests for the endpoint this is queued for. + * @saved_req_buf: variable to save req.buf when bounce buffers are used. + */ +struct dwc2_hsotg_req { + struct usb_request req; + struct list_head queue; + void *saved_req_buf; +}; + +#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \ + IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) +#define call_gadget(_hs, _entry) \ +do { \ + if ((_hs)->gadget.speed != USB_SPEED_UNKNOWN && \ + (_hs)->driver && (_hs)->driver->_entry) { \ + spin_unlock(&_hs->lock); \ + (_hs)->driver->_entry(&(_hs)->gadget); \ + spin_lock(&_hs->lock); \ + } \ +} while (0) +#else +#define call_gadget(_hs, _entry) do {} while (0) +#endif + +struct dwc2_hsotg; +struct dwc2_host_chan; + +/* Device States */ +enum dwc2_lx_state { + DWC2_L0, /* On state */ + DWC2_L1, /* LPM sleep state */ + DWC2_L2, /* USB suspend state */ + DWC2_L3, /* Off state */ +}; + +/* Gadget ep0 states */ +enum dwc2_ep0_state { + DWC2_EP0_SETUP, + DWC2_EP0_DATA_IN, + DWC2_EP0_DATA_OUT, + DWC2_EP0_STATUS_IN, + DWC2_EP0_STATUS_OUT, +}; + +/** + * struct dwc2_core_params - Parameters for configuring the core + * + * @otg_caps: Specifies the OTG capabilities. OTG caps from the platform parameters, + * used to setup the: + * - HNP and SRP capable + * - SRP Only capable + * - No HNP/SRP capable (always available) + * Defaults to best available option + * - OTG revision number the device is compliant with, in binary-coded + * decimal (i.e. 2.0 is 0200H). (see struct usb_otg_caps) + * @host_dma: Specifies whether to use slave or DMA mode for accessing + * the data FIFOs. The driver will automatically detect the + * value for this parameter if none is specified. + * 0 - Slave (always available) + * 1 - DMA (default, if available) + * @dma_desc_enable: When DMA mode is enabled, specifies whether to use + * address DMA mode or descriptor DMA mode for accessing + * the data FIFOs. The driver will automatically detect the + * value for this if none is specified. + * 0 - Address DMA + * 1 - Descriptor DMA (default, if available) + * @dma_desc_fs_enable: When DMA mode is enabled, specifies whether to use + * address DMA mode or descriptor DMA mode for accessing + * the data FIFOs in Full Speed mode only. The driver + * will automatically detect the value for this if none is + * specified. + * 0 - Address DMA + * 1 - Descriptor DMA in FS (default, if available) + * @speed: Specifies the maximum speed of operation in host and + * device mode. The actual speed depends on the speed of + * the attached device and the value of phy_type. + * 0 - High Speed + * (default when phy_type is UTMI+ or ULPI) + * 1 - Full Speed + * (default when phy_type is Full Speed) + * @enable_dynamic_fifo: 0 - Use coreConsultant-specified FIFO size parameters + * 1 - Allow dynamic FIFO sizing (default, if available) + * @en_multiple_tx_fifo: Specifies whether dedicated per-endpoint transmit FIFOs + * are enabled for non-periodic IN endpoints in device + * mode. + * @host_rx_fifo_size: Number of 4-byte words in the Rx FIFO in host mode when + * dynamic FIFO sizing is enabled + * 16 to 32768 + * Actual maximum value is autodetected and also + * the default. + * @host_nperio_tx_fifo_size: Number of 4-byte words in the non-periodic Tx FIFO + * in host mode when dynamic FIFO sizing is enabled + * 16 to 32768 + * Actual maximum value is autodetected and also + * the default. + * @host_perio_tx_fifo_size: Number of 4-byte words in the periodic Tx FIFO in + * host mode when dynamic FIFO sizing is enabled + * 16 to 32768 + * Actual maximum value is autodetected and also + * the default. + * @max_transfer_size: The maximum transfer size supported, in bytes + * 2047 to 65,535 + * Actual maximum value is autodetected and also + * the default. + * @max_packet_count: The maximum number of packets in a transfer + * 15 to 511 + * Actual maximum value is autodetected and also + * the default. + * @host_channels: The number of host channel registers to use + * 1 to 16 + * Actual maximum value is autodetected and also + * the default. + * @phy_type: Specifies the type of PHY interface to use. By default, + * the driver will automatically detect the phy_type. + * 0 - Full Speed Phy + * 1 - UTMI+ Phy + * 2 - ULPI Phy + * Defaults to best available option (2, 1, then 0) + * @phy_utmi_width: Specifies the UTMI+ Data Width (in bits). This parameter + * is applicable for a phy_type of UTMI+ or ULPI. (For a + * ULPI phy_type, this parameter indicates the data width + * between the MAC and the ULPI Wrapper.) Also, this + * parameter is applicable only if the OTG_HSPHY_WIDTH cC + * parameter was set to "8 and 16 bits", meaning that the + * core has been configured to work at either data path + * width. + * 8 or 16 (default 16 if available) + * @phy_ulpi_ddr: Specifies whether the ULPI operates at double or single + * data rate. This parameter is only applicable if phy_type + * is ULPI. + * 0 - single data rate ULPI interface with 8 bit wide + * data bus (default) + * 1 - double data rate ULPI interface with 4 bit wide + * data bus + * @phy_ulpi_ext_vbus: For a ULPI phy, specifies whether to use the internal or + * external supply to drive the VBus + * 0 - Internal supply (default) + * 1 - External supply + * @i2c_enable: Specifies whether to use the I2Cinterface for a full + * speed PHY. This parameter is only applicable if phy_type + * is FS. + * 0 - No (default) + * 1 - Yes + * @ipg_isoc_en: Indicates the IPG supports is enabled or disabled. + * 0 - Disable (default) + * 1 - Enable + * @acg_enable: For enabling Active Clock Gating in the controller + * 0 - No + * 1 - Yes + * @ulpi_fs_ls: Make ULPI phy operate in FS/LS mode only + * 0 - No (default) + * 1 - Yes + * @host_support_fs_ls_low_power: Specifies whether low power mode is supported + * when attached to a Full Speed or Low Speed device in + * host mode. + * 0 - Don't support low power mode (default) + * 1 - Support low power mode + * @host_ls_low_power_phy_clk: Specifies the PHY clock rate in low power mode + * when connected to a Low Speed device in host + * mode. This parameter is applicable only if + * host_support_fs_ls_low_power is enabled. + * 0 - 48 MHz + * (default when phy_type is UTMI+ or ULPI) + * 1 - 6 MHz + * (default when phy_type is Full Speed) + * @oc_disable: Flag to disable overcurrent condition. + * 0 - Allow overcurrent condition to get detected + * 1 - Disable overcurrent condtion to get detected + * @ts_dline: Enable Term Select Dline pulsing + * 0 - No (default) + * 1 - Yes + * @reload_ctl: Allow dynamic reloading of HFIR register during runtime + * 0 - No (default for core < 2.92a) + * 1 - Yes (default for core >= 2.92a) + * @ahbcfg: This field allows the default value of the GAHBCFG + * register to be overridden + * -1 - GAHBCFG value will be set to 0x06 + * (INCR, default) + * all others - GAHBCFG value will be overridden with + * this value + * Not all bits can be controlled like this, the + * bits defined by GAHBCFG_CTRL_MASK are controlled + * by the driver and are ignored in this + * configuration value. + * @uframe_sched: True to enable the microframe scheduler + * @external_id_pin_ctl: Specifies whether ID pin is handled externally. + * Disable CONIDSTSCHNG controller interrupt in such + * case. + * 0 - No (default) + * 1 - Yes + * @power_down: Specifies whether the controller support power_down. + * If power_down is enabled, the controller will enter + * power_down in both peripheral and host mode when + * needed. + * 0 - No (default) + * 1 - Partial power down + * 2 - Hibernation + * @no_clock_gating: Specifies whether to avoid clock gating feature. + * 0 - No (use clock gating) + * 1 - Yes (avoid it) + * @lpm: Enable LPM support. + * 0 - No + * 1 - Yes + * @lpm_clock_gating: Enable core PHY clock gating. + * 0 - No + * 1 - Yes + * @besl: Enable LPM Errata support. + * 0 - No + * 1 - Yes + * @hird_threshold_en: HIRD or HIRD Threshold enable. + * 0 - No + * 1 - Yes + * @hird_threshold: Value of BESL or HIRD Threshold. + * @ref_clk_per: Indicates in terms of pico seconds the period + * of ref_clk. + * 62500 - 16MHz + * 58823 - 17MHz + * 52083 - 19.2MHz + * 50000 - 20MHz + * 41666 - 24MHz + * 33333 - 30MHz (default) + * 25000 - 40MHz + * @sof_cnt_wkup_alert: Indicates in term of number of SOF's after which + * the controller should generate an interrupt if the + * device had been in L1 state until that period. + * This is used by SW to initiate Remote WakeUp in the + * controller so as to sync to the uF number from the host. + * @activate_stm_fs_transceiver: Activate internal transceiver using GGPIO + * register. + * 0 - Deactivate the transceiver (default) + * 1 - Activate the transceiver + * @activate_stm_id_vb_detection: Activate external ID pin and Vbus level + * detection using GGPIO register. + * 0 - Deactivate the external level detection (default) + * 1 - Activate the external level detection + * @activate_ingenic_overcurrent_detection: Activate Ingenic overcurrent + * detection. + * 0 - Deactivate the overcurrent detection + * 1 - Activate the overcurrent detection (default) + * @g_dma: Enables gadget dma usage (default: autodetect). + * @g_dma_desc: Enables gadget descriptor DMA (default: autodetect). + * @g_rx_fifo_size: The periodic rx fifo size for the device, in + * DWORDS from 16-32768 (default: 2048 if + * possible, otherwise autodetect). + * @g_np_tx_fifo_size: The non-periodic tx fifo size for the device in + * DWORDS from 16-32768 (default: 1024 if + * possible, otherwise autodetect). + * @g_tx_fifo_size: An array of TX fifo sizes in dedicated fifo + * mode. Each value corresponds to one EP + * starting from EP1 (max 15 values). Sizes are + * in DWORDS with possible values from + * 16-32768 (default: 256, 256, 256, 256, 768, + * 768, 768, 768, 0, 0, 0, 0, 0, 0, 0). + * @change_speed_quirk: Change speed configuration to DWC2_SPEED_PARAM_FULL + * while full&low speed device connect. And change speed + * back to DWC2_SPEED_PARAM_HIGH while device is gone. + * 0 - No (default) + * 1 - Yes + * @service_interval: Enable service interval based scheduling. + * 0 - No + * 1 - Yes + * + * The following parameters may be specified when starting the module. These + * parameters define how the DWC_otg controller should be configured. A + * value of -1 (or any other out of range value) for any parameter means + * to read the value from hardware (if possible) or use the builtin + * default described above. + */ +struct dwc2_core_params { + struct usb_otg_caps otg_caps; + u8 phy_type; +#define DWC2_PHY_TYPE_PARAM_FS 0 +#define DWC2_PHY_TYPE_PARAM_UTMI 1 +#define DWC2_PHY_TYPE_PARAM_ULPI 2 + + u8 speed; +#define DWC2_SPEED_PARAM_HIGH 0 +#define DWC2_SPEED_PARAM_FULL 1 +#define DWC2_SPEED_PARAM_LOW 2 + + u8 phy_utmi_width; + bool phy_ulpi_ddr; + bool phy_ulpi_ext_vbus; + bool enable_dynamic_fifo; + bool en_multiple_tx_fifo; + bool i2c_enable; + bool acg_enable; + bool ulpi_fs_ls; + bool ts_dline; + bool reload_ctl; + bool uframe_sched; + bool external_id_pin_ctl; + + int power_down; +#define DWC2_POWER_DOWN_PARAM_NONE 0 +#define DWC2_POWER_DOWN_PARAM_PARTIAL 1 +#define DWC2_POWER_DOWN_PARAM_HIBERNATION 2 + bool no_clock_gating; + + bool lpm; + bool lpm_clock_gating; + bool besl; + bool hird_threshold_en; + bool service_interval; + u8 hird_threshold; + bool activate_stm_fs_transceiver; + bool activate_stm_id_vb_detection; + bool activate_ingenic_overcurrent_detection; + bool ipg_isoc_en; + u16 max_packet_count; + u32 max_transfer_size; + u32 ahbcfg; + + /* GREFCLK parameters */ + u32 ref_clk_per; + u16 sof_cnt_wkup_alert; + + /* Host parameters */ + bool host_dma; + bool dma_desc_enable; + bool dma_desc_fs_enable; + bool host_support_fs_ls_low_power; + bool host_ls_low_power_phy_clk; + bool oc_disable; + + u8 host_channels; + u16 host_rx_fifo_size; + u16 host_nperio_tx_fifo_size; + u16 host_perio_tx_fifo_size; + + /* Gadget parameters */ + bool g_dma; + bool g_dma_desc; + u32 g_rx_fifo_size; + u32 g_np_tx_fifo_size; + u32 g_tx_fifo_size[MAX_EPS_CHANNELS]; + + bool change_speed_quirk; +}; + +/** + * struct dwc2_hw_params - Autodetected parameters. + * + * These parameters are the various parameters read from hardware + * registers during initialization. They typically contain the best + * supported or maximum value that can be configured in the + * corresponding dwc2_core_params value. + * + * The values that are not in dwc2_core_params are documented below. + * + * @op_mode: Mode of Operation + * 0 - HNP- and SRP-Capable OTG (Host & Device) + * 1 - SRP-Capable OTG (Host & Device) + * 2 - Non-HNP and Non-SRP Capable OTG (Host & Device) + * 3 - SRP-Capable Device + * 4 - Non-OTG Device + * 5 - SRP-Capable Host + * 6 - Non-OTG Host + * @arch: Architecture + * 0 - Slave only + * 1 - External DMA + * 2 - Internal DMA + * @ipg_isoc_en: This feature indicates that the controller supports + * the worst-case scenario of Rx followed by Rx + * Interpacket Gap (IPG) (32 bitTimes) as per the utmi + * specification for any token following ISOC OUT token. + * 0 - Don't support + * 1 - Support + * @power_optimized: Are power optimizations enabled? + * @num_dev_ep: Number of device endpoints available + * @num_dev_in_eps: Number of device IN endpoints available + * @num_dev_perio_in_ep: Number of device periodic IN endpoints + * available + * @dev_token_q_depth: Device Mode IN Token Sequence Learning Queue + * Depth + * 0 to 30 + * @host_perio_tx_q_depth: + * Host Mode Periodic Request Queue Depth + * 2, 4 or 8 + * @nperio_tx_q_depth: + * Non-Periodic Request Queue Depth + * 2, 4 or 8 + * @hs_phy_type: High-speed PHY interface type + * 0 - High-speed interface not supported + * 1 - UTMI+ + * 2 - ULPI + * 3 - UTMI+ and ULPI + * @fs_phy_type: Full-speed PHY interface type + * 0 - Full speed interface not supported + * 1 - Dedicated full speed interface + * 2 - FS pins shared with UTMI+ pins + * 3 - FS pins shared with ULPI pins + * @total_fifo_size: Total internal RAM for FIFOs (bytes) + * @hibernation: Is hibernation enabled? + * @utmi_phy_data_width: UTMI+ PHY data width + * 0 - 8 bits + * 1 - 16 bits + * 2 - 8 or 16 bits + * @snpsid: Value from SNPSID register + * @dev_ep_dirs: Direction of device endpoints (GHWCFG1) + * @g_tx_fifo_size: Power-on values of TxFIFO sizes + * @dma_desc_enable: When DMA mode is enabled, specifies whether to use + * address DMA mode or descriptor DMA mode for accessing + * the data FIFOs. The driver will automatically detect the + * value for this if none is specified. + * 0 - Address DMA + * 1 - Descriptor DMA (default, if available) + * @enable_dynamic_fifo: 0 - Use coreConsultant-specified FIFO size parameters + * 1 - Allow dynamic FIFO sizing (default, if available) + * @en_multiple_tx_fifo: Specifies whether dedicated per-endpoint transmit FIFOs + * are enabled for non-periodic IN endpoints in device + * mode. + * @host_nperio_tx_fifo_size: Number of 4-byte words in the non-periodic Tx FIFO + * in host mode when dynamic FIFO sizing is enabled + * 16 to 32768 + * Actual maximum value is autodetected and also + * the default. + * @host_perio_tx_fifo_size: Number of 4-byte words in the periodic Tx FIFO in + * host mode when dynamic FIFO sizing is enabled + * 16 to 32768 + * Actual maximum value is autodetected and also + * the default. + * @max_transfer_size: The maximum transfer size supported, in bytes + * 2047 to 65,535 + * Actual maximum value is autodetected and also + * the default. + * @max_packet_count: The maximum number of packets in a transfer + * 15 to 511 + * Actual maximum value is autodetected and also + * the default. + * @host_channels: The number of host channel registers to use + * 1 to 16 + * Actual maximum value is autodetected and also + * the default. + * @dev_nperio_tx_fifo_size: Number of 4-byte words in the non-periodic Tx FIFO + * in device mode when dynamic FIFO sizing is enabled + * 16 to 32768 + * Actual maximum value is autodetected and also + * the default. + * @i2c_enable: Specifies whether to use the I2Cinterface for a full + * speed PHY. This parameter is only applicable if phy_type + * is FS. + * 0 - No (default) + * 1 - Yes + * @acg_enable: For enabling Active Clock Gating in the controller + * 0 - Disable + * 1 - Enable + * @lpm_mode: For enabling Link Power Management in the controller + * 0 - Disable + * 1 - Enable + * @rx_fifo_size: Number of 4-byte words in the Rx FIFO when dynamic + * FIFO sizing is enabled 16 to 32768 + * Actual maximum value is autodetected and also + * the default. + * @service_interval_mode: For enabling service interval based scheduling in the + * controller. + * 0 - Disable + * 1 - Enable + */ +struct dwc2_hw_params { + unsigned op_mode:3; + unsigned arch:2; + unsigned dma_desc_enable:1; + unsigned enable_dynamic_fifo:1; + unsigned en_multiple_tx_fifo:1; + unsigned rx_fifo_size:16; + unsigned host_nperio_tx_fifo_size:16; + unsigned dev_nperio_tx_fifo_size:16; + unsigned host_perio_tx_fifo_size:16; + unsigned nperio_tx_q_depth:3; + unsigned host_perio_tx_q_depth:3; + unsigned dev_token_q_depth:5; + unsigned max_transfer_size:26; + unsigned max_packet_count:11; + unsigned host_channels:5; + unsigned hs_phy_type:2; + unsigned fs_phy_type:2; + unsigned i2c_enable:1; + unsigned acg_enable:1; + unsigned num_dev_ep:4; + unsigned num_dev_in_eps : 4; + unsigned num_dev_perio_in_ep:4; + unsigned total_fifo_size:16; + unsigned power_optimized:1; + unsigned hibernation:1; + unsigned utmi_phy_data_width:2; + unsigned lpm_mode:1; + unsigned ipg_isoc_en:1; + unsigned service_interval_mode:1; + u32 snpsid; + u32 dev_ep_dirs; + u32 g_tx_fifo_size[MAX_EPS_CHANNELS]; +}; + +/* Size of control and EP0 buffers */ +#define DWC2_CTRL_BUFF_SIZE 8 + +/** + * struct dwc2_gregs_backup - Holds global registers state before + * entering partial power down + * @gotgctl: Backup of GOTGCTL register + * @gintmsk: Backup of GINTMSK register + * @gahbcfg: Backup of GAHBCFG register + * @gusbcfg: Backup of GUSBCFG register + * @grxfsiz: Backup of GRXFSIZ register + * @gnptxfsiz: Backup of GNPTXFSIZ register + * @gi2cctl: Backup of GI2CCTL register + * @glpmcfg: Backup of GLPMCFG register + * @gdfifocfg: Backup of GDFIFOCFG register + * @pcgcctl: Backup of PCGCCTL register + * @pcgcctl1: Backup of PCGCCTL1 register + * @dtxfsiz: Backup of DTXFSIZ registers for each endpoint + * @gpwrdn: Backup of GPWRDN register + * @valid: True if registers values backuped. + */ +struct dwc2_gregs_backup { + u32 gotgctl; + u32 gintmsk; + u32 gahbcfg; + u32 gusbcfg; + u32 grxfsiz; + u32 gnptxfsiz; + u32 gi2cctl; + u32 glpmcfg; + u32 pcgcctl; + u32 pcgcctl1; + u32 gdfifocfg; + u32 gpwrdn; + bool valid; +}; + +/** + * struct dwc2_dregs_backup - Holds device registers state before + * entering partial power down + * @dcfg: Backup of DCFG register + * @dctl: Backup of DCTL register + * @daintmsk: Backup of DAINTMSK register + * @diepmsk: Backup of DIEPMSK register + * @doepmsk: Backup of DOEPMSK register + * @diepctl: Backup of DIEPCTL register + * @dieptsiz: Backup of DIEPTSIZ register + * @diepdma: Backup of DIEPDMA register + * @doepctl: Backup of DOEPCTL register + * @doeptsiz: Backup of DOEPTSIZ register + * @doepdma: Backup of DOEPDMA register + * @dtxfsiz: Backup of DTXFSIZ registers for each endpoint + * @valid: True if registers values backuped. + */ +struct dwc2_dregs_backup { + u32 dcfg; + u32 dctl; + u32 daintmsk; + u32 diepmsk; + u32 doepmsk; + u32 diepctl[MAX_EPS_CHANNELS]; + u32 dieptsiz[MAX_EPS_CHANNELS]; + u32 diepdma[MAX_EPS_CHANNELS]; + u32 doepctl[MAX_EPS_CHANNELS]; + u32 doeptsiz[MAX_EPS_CHANNELS]; + u32 doepdma[MAX_EPS_CHANNELS]; + u32 dtxfsiz[MAX_EPS_CHANNELS]; + bool valid; +}; + +/** + * struct dwc2_hregs_backup - Holds host registers state before + * entering partial power down + * @hcfg: Backup of HCFG register + * @haintmsk: Backup of HAINTMSK register + * @hcintmsk: Backup of HCINTMSK register + * @hprt0: Backup of HPTR0 register + * @hfir: Backup of HFIR register + * @hptxfsiz: Backup of HPTXFSIZ register + * @valid: True if registers values backuped. + */ +struct dwc2_hregs_backup { + u32 hcfg; + u32 haintmsk; + u32 hcintmsk[MAX_EPS_CHANNELS]; + u32 hprt0; + u32 hfir; + u32 hptxfsiz; + bool valid; +}; + +/* + * Constants related to high speed periodic scheduling + * + * We have a periodic schedule that is DWC2_HS_SCHEDULE_UFRAMES long. From a + * reservation point of view it's assumed that the schedule goes right back to + * the beginning after the end of the schedule. + * + * What does that mean for scheduling things with a long interval? It means + * we'll reserve time for them in every possible microframe that they could + * ever be scheduled in. ...but we'll still only actually schedule them as + * often as they were requested. + * + * We keep our schedule in a "bitmap" structure. This simplifies having + * to keep track of and merge intervals: we just let the bitmap code do most + * of the heavy lifting. In a way scheduling is much like memory allocation. + * + * We schedule 100us per uframe or 80% of 125us (the maximum amount you're + * supposed to schedule for periodic transfers). That's according to spec. + * + * Note that though we only schedule 80% of each microframe, the bitmap that we + * keep the schedule in is tightly packed (AKA it doesn't have 100us worth of + * space for each uFrame). + * + * Requirements: + * - DWC2_HS_SCHEDULE_UFRAMES must even divide 0x4000 (HFNUM_MAX_FRNUM + 1) + * - DWC2_HS_SCHEDULE_UFRAMES must be 8 times DWC2_LS_SCHEDULE_FRAMES (probably + * could be any multiple of 8 times DWC2_LS_SCHEDULE_FRAMES, but there might + * be bugs). The 8 comes from the USB spec: number of microframes per frame. + */ +#define DWC2_US_PER_UFRAME 125 +#define DWC2_HS_PERIODIC_US_PER_UFRAME 100 + +#define DWC2_HS_SCHEDULE_UFRAMES 8 +#define DWC2_HS_SCHEDULE_US (DWC2_HS_SCHEDULE_UFRAMES * \ + DWC2_HS_PERIODIC_US_PER_UFRAME) + +/* + * Constants related to low speed scheduling + * + * For high speed we schedule every 1us. For low speed that's a bit overkill, + * so we make up a unit called a "slice" that's worth 25us. There are 40 + * slices in a full frame and we can schedule 36 of those (90%) for periodic + * transfers. + * + * Our low speed schedule can be as short as 1 frame or could be longer. When + * we only schedule 1 frame it means that we'll need to reserve a time every + * frame even for things that only transfer very rarely, so something that runs + * every 2048 frames will get time reserved in every frame. Our low speed + * schedule can be longer and we'll be able to handle more overlap, but that + * will come at increased memory cost and increased time to schedule. + * + * Note: one other advantage of a short low speed schedule is that if we mess + * up and miss scheduling we can jump in and use any of the slots that we + * happened to reserve. + * + * With 25 us per slice and 1 frame in the schedule, we only need 4 bytes for + * the schedule. There will be one schedule per TT. + * + * Requirements: + * - DWC2_US_PER_SLICE must evenly divide DWC2_LS_PERIODIC_US_PER_FRAME. + */ +#define DWC2_US_PER_SLICE 25 +#define DWC2_SLICES_PER_UFRAME (DWC2_US_PER_UFRAME / DWC2_US_PER_SLICE) + +#define DWC2_ROUND_US_TO_SLICE(us) \ + (DIV_ROUND_UP((us), DWC2_US_PER_SLICE) * \ + DWC2_US_PER_SLICE) + +#define DWC2_LS_PERIODIC_US_PER_FRAME \ + 900 +#define DWC2_LS_PERIODIC_SLICES_PER_FRAME \ + (DWC2_LS_PERIODIC_US_PER_FRAME / \ + DWC2_US_PER_SLICE) + +#define DWC2_LS_SCHEDULE_FRAMES 1 +#define DWC2_LS_SCHEDULE_SLICES (DWC2_LS_SCHEDULE_FRAMES * \ + DWC2_LS_PERIODIC_SLICES_PER_FRAME) + +/** + * struct dwc2_hsotg - Holds the state of the driver, including the non-periodic + * and periodic schedules + * + * These are common for both host and peripheral modes: + * + * @dev: The struct device pointer + * @regs: Pointer to controller regs + * @hw_params: Parameters that were autodetected from the + * hardware registers + * @params: Parameters that define how the core should be configured + * @op_state: The operational State, during transitions (a_host=> + * a_peripheral and b_device=>b_host) this may not match + * the core, but allows the software to determine + * transitions + * @dr_mode: Requested mode of operation, one of following: + * - USB_DR_MODE_PERIPHERAL + * - USB_DR_MODE_HOST + * - USB_DR_MODE_OTG + * @role_sw: usb_role_switch handle + * @role_sw_default_mode: default operation mode of controller while usb role + * is USB_ROLE_NONE + * @hcd_enabled: Host mode sub-driver initialization indicator. + * @gadget_enabled: Peripheral mode sub-driver initialization indicator. + * @ll_hw_enabled: Status of low-level hardware resources. + * @hibernated: True if core is hibernated + * @in_ppd: True if core is partial power down mode. + * @bus_suspended: True if bus is suspended + * @reset_phy_on_wake: Quirk saying that we should assert PHY reset on a + * remote wakeup. + * @phy_off_for_suspend: Status of whether we turned the PHY off at suspend. + * @need_phy_for_wake: Quirk saying that we should keep the PHY on at + * suspend if we need USB to wake us up. + * @frame_number: Frame number read from the core. For both device + * and host modes. The value ranges are from 0 + * to HFNUM_MAX_FRNUM. + * @phy: The otg phy transceiver structure for phy control. + * @uphy: The otg phy transceiver structure for old USB phy + * control. + * @plat: The platform specific configuration data. This can be + * removed once all SoCs support usb transceiver. + * @supplies: Definition of USB power supplies + * @vbus_supply: Regulator supplying vbus. + * @usb33d: Optional 3.3v regulator used on some stm32 devices to + * supply ID and VBUS detection hardware. + * @lock: Spinlock that protects all the driver data structures + * @priv: Stores a pointer to the struct usb_hcd + * @queuing_high_bandwidth: True if multiple packets of a high-bandwidth + * transfer are in process of being queued + * @srp_success: Stores status of SRP request in the case of a FS PHY + * with an I2C interface + * @wq_otg: Workqueue object used for handling of some interrupts + * @wf_otg: Work object for handling Connector ID Status Change + * interrupt + * @wkp_timer: Timer object for handling Wakeup Detected interrupt + * @lx_state: Lx state of connected device + * @gr_backup: Backup of global registers during suspend + * @dr_backup: Backup of device registers during suspend + * @hr_backup: Backup of host registers during suspend + * @needs_byte_swap: Specifies whether the opposite endianness. + * + * These are for host mode: + * + * @flags: Flags for handling root port state changes + * @flags.d32: Contain all root port flags + * @flags.b: Separate root port flags from each other + * @flags.b.port_connect_status_change: True if root port connect status + * changed + * @flags.b.port_connect_status: True if device connected to root port + * @flags.b.port_reset_change: True if root port reset status changed + * @flags.b.port_enable_change: True if root port enable status changed + * @flags.b.port_suspend_change: True if root port suspend status changed + * @flags.b.port_over_current_change: True if root port over current state + * changed. + * @flags.b.port_l1_change: True if root port l1 status changed + * @flags.b.reserved: Reserved bits of root port register + * @non_periodic_sched_inactive: Inactive QHs in the non-periodic schedule. + * Transfers associated with these QHs are not currently + * assigned to a host channel. + * @non_periodic_sched_active: Active QHs in the non-periodic schedule. + * Transfers associated with these QHs are currently + * assigned to a host channel. + * @non_periodic_qh_ptr: Pointer to next QH to process in the active + * non-periodic schedule + * @non_periodic_sched_waiting: Waiting QHs in the non-periodic schedule. + * Transfers associated with these QHs are not currently + * assigned to a host channel. + * @periodic_sched_inactive: Inactive QHs in the periodic schedule. This is a + * list of QHs for periodic transfers that are _not_ + * scheduled for the next frame. Each QH in the list has an + * interval counter that determines when it needs to be + * scheduled for execution. This scheduling mechanism + * allows only a simple calculation for periodic bandwidth + * used (i.e. must assume that all periodic transfers may + * need to execute in the same frame). However, it greatly + * simplifies scheduling and should be sufficient for the + * vast majority of OTG hosts, which need to connect to a + * small number of peripherals at one time. Items move from + * this list to periodic_sched_ready when the QH interval + * counter is 0 at SOF. + * @periodic_sched_ready: List of periodic QHs that are ready for execution in + * the next frame, but have not yet been assigned to host + * channels. Items move from this list to + * periodic_sched_assigned as host channels become + * available during the current frame. + * @periodic_sched_assigned: List of periodic QHs to be executed in the next + * frame that are assigned to host channels. Items move + * from this list to periodic_sched_queued as the + * transactions for the QH are queued to the DWC_otg + * controller. + * @periodic_sched_queued: List of periodic QHs that have been queued for + * execution. Items move from this list to either + * periodic_sched_inactive or periodic_sched_ready when the + * channel associated with the transfer is released. If the + * interval for the QH is 1, the item moves to + * periodic_sched_ready because it must be rescheduled for + * the next frame. Otherwise, the item moves to + * periodic_sched_inactive. + * @split_order: List keeping track of channels doing splits, in order. + * @periodic_usecs: Total bandwidth claimed so far for periodic transfers. + * This value is in microseconds per (micro)frame. The + * assumption is that all periodic transfers may occur in + * the same (micro)frame. + * @hs_periodic_bitmap: Bitmap used by the microframe scheduler any time the + * host is in high speed mode; low speed schedules are + * stored elsewhere since we need one per TT. + * @periodic_qh_count: Count of periodic QHs, if using several eps. Used for + * SOF enable/disable. + * @free_hc_list: Free host channels in the controller. This is a list of + * struct dwc2_host_chan items. + * @periodic_channels: Number of host channels assigned to periodic transfers. + * Currently assuming that there is a dedicated host + * channel for each periodic transaction and at least one + * host channel is available for non-periodic transactions. + * @non_periodic_channels: Number of host channels assigned to non-periodic + * transfers + * @available_host_channels: Number of host channels available for the + * microframe scheduler to use + * @hc_ptr_array: Array of pointers to the host channel descriptors. + * Allows accessing a host channel descriptor given the + * host channel number. This is useful in interrupt + * handlers. + * @status_buf: Buffer used for data received during the status phase of + * a control transfer. + * @status_buf_dma: DMA address for status_buf + * @start_work: Delayed work for handling host A-cable connection + * @reset_work: Delayed work for handling a port reset + * @phy_reset_work: Work structure for doing a PHY reset + * @otg_port: OTG port number + * @frame_list: Frame list + * @frame_list_dma: Frame list DMA address + * @frame_list_sz: Frame list size + * @desc_gen_cache: Kmem cache for generic descriptors + * @desc_hsisoc_cache: Kmem cache for hs isochronous descriptors + * @unaligned_cache: Kmem cache for DMA mode to handle non-aligned buf + * + * These are for peripheral mode: + * + * @driver: USB gadget driver + * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos. + * @num_of_eps: Number of available EPs (excluding EP0) + * @debug_root: Root directrory for debugfs. + * @ep0_reply: Request used for ep0 reply. + * @ep0_buff: Buffer for EP0 reply data, if needed. + * @ctrl_buff: Buffer for EP0 control requests. + * @ctrl_req: Request for EP0 control packets. + * @ep0_state: EP0 control transfers state + * @delayed_status: true when gadget driver asks for delayed status + * @test_mode: USB test mode requested by the host + * @remote_wakeup_allowed: True if device is allowed to wake-up host by + * remote-wakeup signalling + * @setup_desc_dma: EP0 setup stage desc chain DMA address + * @setup_desc: EP0 setup stage desc chain pointer + * @ctrl_in_desc_dma: EP0 IN data phase desc chain DMA address + * @ctrl_in_desc: EP0 IN data phase desc chain pointer + * @ctrl_out_desc_dma: EP0 OUT data phase desc chain DMA address + * @ctrl_out_desc: EP0 OUT data phase desc chain pointer + * @irq: Interrupt request line number + * @clk: Pointer to otg clock + * @utmi_clk: Pointer to utmi_clk clock + * @reset: Pointer to dwc2 reset controller + * @reset_ecc: Pointer to dwc2 optional reset controller in Stratix10. + * @regset: A pointer to a struct debugfs_regset32, which contains + * a pointer to an array of register definitions, the + * array size and the base address where the register bank + * is to be found. + * @last_frame_num: Number of last frame. Range from 0 to 32768 + * @frame_num_array: Used only if CONFIG_USB_DWC2_TRACK_MISSED_SOFS is + * defined, for missed SOFs tracking. Array holds that + * frame numbers, which not equal to last_frame_num +1 + * @last_frame_num_array: Used only if CONFIG_USB_DWC2_TRACK_MISSED_SOFS is + * defined, for missed SOFs tracking. + * If current_frame_number != last_frame_num+1 + * then last_frame_num added to this array + * @frame_num_idx: Actual size of frame_num_array and last_frame_num_array + * @dumped_frame_num_array: 1 - if missed SOFs frame numbers dumbed + * 0 - if missed SOFs frame numbers not dumbed + * @fifo_mem: Total internal RAM for FIFOs (bytes) + * @fifo_map: Each bit intend for concrete fifo. If that bit is set, + * then that fifo is used + * @gadget: Represents a usb gadget device + * @connected: Used in slave mode. True if device connected with host + * @eps_in: The IN endpoints being supplied to the gadget framework + * @eps_out: The OUT endpoints being supplied to the gadget framework + * @new_connection: Used in host mode. True if there are new connected + * device + * @enabled: Indicates the enabling state of controller + * + */ +struct dwc2_hsotg { + struct device *dev; + void __iomem *regs; + /** Params detected from hardware */ + struct dwc2_hw_params hw_params; + /** Params to actually use */ + struct dwc2_core_params params; + enum usb_otg_state op_state; + enum usb_dr_mode dr_mode; + struct usb_role_switch *role_sw; + enum usb_dr_mode role_sw_default_mode; + unsigned int hcd_enabled:1; + unsigned int gadget_enabled:1; + unsigned int ll_hw_enabled:1; + unsigned int hibernated:1; + unsigned int in_ppd:1; + bool bus_suspended; + unsigned int reset_phy_on_wake:1; + unsigned int need_phy_for_wake:1; + unsigned int phy_off_for_suspend:1; + u16 frame_number; + + struct phy *phy; + struct usb_phy *uphy; + struct dwc2_hsotg_plat *plat; + struct regulator_bulk_data supplies[DWC2_NUM_SUPPLIES]; + struct regulator *vbus_supply; + struct regulator *usb33d; + + spinlock_t lock; + void *priv; + int irq; + struct clk *clk; + struct clk *utmi_clk; + struct reset_control *reset; + struct reset_control *reset_ecc; + + unsigned int queuing_high_bandwidth:1; + unsigned int srp_success:1; + + struct workqueue_struct *wq_otg; + struct work_struct wf_otg; + struct timer_list wkp_timer; + enum dwc2_lx_state lx_state; + struct dwc2_gregs_backup gr_backup; + struct dwc2_dregs_backup dr_backup; + struct dwc2_hregs_backup hr_backup; + + struct dentry *debug_root; + struct debugfs_regset32 *regset; + bool needs_byte_swap; + + /* DWC OTG HW Release versions */ +#define DWC2_CORE_REV_2_71a 0x4f54271a +#define DWC2_CORE_REV_2_72a 0x4f54272a +#define DWC2_CORE_REV_2_80a 0x4f54280a +#define DWC2_CORE_REV_2_90a 0x4f54290a +#define DWC2_CORE_REV_2_91a 0x4f54291a +#define DWC2_CORE_REV_2_92a 0x4f54292a +#define DWC2_CORE_REV_2_94a 0x4f54294a +#define DWC2_CORE_REV_3_00a 0x4f54300a +#define DWC2_CORE_REV_3_10a 0x4f54310a +#define DWC2_CORE_REV_4_00a 0x4f54400a +#define DWC2_CORE_REV_4_20a 0x4f54420a +#define DWC2_FS_IOT_REV_1_00a 0x5531100a +#define DWC2_HS_IOT_REV_1_00a 0x5532100a +#define DWC2_CORE_REV_MASK 0x0000ffff + + /* DWC OTG HW Core ID */ +#define DWC2_OTG_ID 0x4f540000 +#define DWC2_FS_IOT_ID 0x55310000 +#define DWC2_HS_IOT_ID 0x55320000 + +#if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) + union dwc2_hcd_internal_flags { + u32 d32; + struct { + unsigned port_connect_status_change:1; + unsigned port_connect_status:1; + unsigned port_reset_change:1; + unsigned port_enable_change:1; + unsigned port_suspend_change:1; + unsigned port_over_current_change:1; + unsigned port_l1_change:1; + unsigned reserved:25; + } b; + } flags; + + struct list_head non_periodic_sched_inactive; + struct list_head non_periodic_sched_waiting; + struct list_head non_periodic_sched_active; + struct list_head *non_periodic_qh_ptr; + struct list_head periodic_sched_inactive; + struct list_head periodic_sched_ready; + struct list_head periodic_sched_assigned; + struct list_head periodic_sched_queued; + struct list_head split_order; + u16 periodic_usecs; + DECLARE_BITMAP(hs_periodic_bitmap, DWC2_HS_SCHEDULE_US); + u16 periodic_qh_count; + bool new_connection; + + u16 last_frame_num; + +#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS +#define FRAME_NUM_ARRAY_SIZE 1000 + u16 *frame_num_array; + u16 *last_frame_num_array; + int frame_num_idx; + int dumped_frame_num_array; +#endif + + struct list_head free_hc_list; + int periodic_channels; + int non_periodic_channels; + int available_host_channels; + struct dwc2_host_chan *hc_ptr_array[MAX_EPS_CHANNELS]; + u8 *status_buf; + dma_addr_t status_buf_dma; +#define DWC2_HCD_STATUS_BUF_SIZE 64 + + struct delayed_work start_work; + struct delayed_work reset_work; + struct work_struct phy_reset_work; + u8 otg_port; + u32 *frame_list; + dma_addr_t frame_list_dma; + u32 frame_list_sz; + struct kmem_cache *desc_gen_cache; + struct kmem_cache *desc_hsisoc_cache; + struct kmem_cache *unaligned_cache; +#define DWC2_KMEM_UNALIGNED_BUF_SIZE 1024 + +#endif /* CONFIG_USB_DWC2_HOST || CONFIG_USB_DWC2_DUAL_ROLE */ + +#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \ + IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) + /* Gadget structures */ + struct usb_gadget_driver *driver; + int fifo_mem; + unsigned int dedicated_fifos:1; + unsigned char num_of_eps; + u32 fifo_map; + + struct usb_request *ep0_reply; + struct usb_request *ctrl_req; + void *ep0_buff; + void *ctrl_buff; + enum dwc2_ep0_state ep0_state; + unsigned delayed_status : 1; + u8 test_mode; + + dma_addr_t setup_desc_dma[2]; + struct dwc2_dma_desc *setup_desc[2]; + dma_addr_t ctrl_in_desc_dma; + struct dwc2_dma_desc *ctrl_in_desc; + dma_addr_t ctrl_out_desc_dma; + struct dwc2_dma_desc *ctrl_out_desc; + + struct usb_gadget gadget; + unsigned int enabled:1; + unsigned int connected:1; + unsigned int remote_wakeup_allowed:1; + struct dwc2_hsotg_ep *eps_in[MAX_EPS_CHANNELS]; + struct dwc2_hsotg_ep *eps_out[MAX_EPS_CHANNELS]; +#endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */ +}; + +/* Normal architectures just use readl/write */ +static inline u32 dwc2_readl(struct dwc2_hsotg *hsotg, u32 offset) +{ + u32 val; + + val = readl(hsotg->regs + offset); + if (hsotg->needs_byte_swap) + return swab32(val); + else + return val; +} + +static inline void dwc2_writel(struct dwc2_hsotg *hsotg, u32 value, u32 offset) +{ + if (hsotg->needs_byte_swap) + writel(swab32(value), hsotg->regs + offset); + else + writel(value, hsotg->regs + offset); + +#ifdef DWC2_LOG_WRITES + pr_info("info:: wrote %08x to %p\n", value, hsotg->regs + offset); +#endif +} + +static inline void dwc2_readl_rep(struct dwc2_hsotg *hsotg, u32 offset, + void *buffer, unsigned int count) +{ + if (count) { + u32 *buf = buffer; + + do { + u32 x = dwc2_readl(hsotg, offset); + *buf++ = x; + } while (--count); + } +} + +static inline void dwc2_writel_rep(struct dwc2_hsotg *hsotg, u32 offset, + const void *buffer, unsigned int count) +{ + if (count) { + const u32 *buf = buffer; + + do { + dwc2_writel(hsotg, *buf++, offset); + } while (--count); + } +} + +/* Reasons for halting a host channel */ +enum dwc2_halt_status { + DWC2_HC_XFER_NO_HALT_STATUS, + DWC2_HC_XFER_COMPLETE, + DWC2_HC_XFER_URB_COMPLETE, + DWC2_HC_XFER_ACK, + DWC2_HC_XFER_NAK, + DWC2_HC_XFER_NYET, + DWC2_HC_XFER_STALL, + DWC2_HC_XFER_XACT_ERR, + DWC2_HC_XFER_FRAME_OVERRUN, + DWC2_HC_XFER_BABBLE_ERR, + DWC2_HC_XFER_DATA_TOGGLE_ERR, + DWC2_HC_XFER_AHB_ERR, + DWC2_HC_XFER_PERIODIC_INCOMPLETE, + DWC2_HC_XFER_URB_DEQUEUE, +}; + +/* Core version information */ +static inline bool dwc2_is_iot(struct dwc2_hsotg *hsotg) +{ + return (hsotg->hw_params.snpsid & 0xfff00000) == 0x55300000; +} + +static inline bool dwc2_is_fs_iot(struct dwc2_hsotg *hsotg) +{ + return (hsotg->hw_params.snpsid & 0xffff0000) == 0x55310000; +} + +static inline bool dwc2_is_hs_iot(struct dwc2_hsotg *hsotg) +{ + return (hsotg->hw_params.snpsid & 0xffff0000) == 0x55320000; +} + +/* + * The following functions support initialization of the core driver component + * and the DWC_otg controller + */ +int dwc2_core_reset(struct dwc2_hsotg *hsotg, bool skip_wait); +int dwc2_enter_partial_power_down(struct dwc2_hsotg *hsotg); +int dwc2_exit_partial_power_down(struct dwc2_hsotg *hsotg, int rem_wakeup, + bool restore); +int dwc2_enter_hibernation(struct dwc2_hsotg *hsotg, int is_host); +int dwc2_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup, + int reset, int is_host); +void dwc2_init_fs_ls_pclk_sel(struct dwc2_hsotg *hsotg); +int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy); + +void dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host); +void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg); + +bool dwc2_is_controller_alive(struct dwc2_hsotg *hsotg); + +int dwc2_check_core_version(struct dwc2_hsotg *hsotg); + +/* + * Common core Functions. + * The following functions support managing the DWC_otg controller in either + * device or host mode. + */ +void dwc2_read_packet(struct dwc2_hsotg *hsotg, u8 *dest, u16 bytes); +void dwc2_flush_tx_fifo(struct dwc2_hsotg *hsotg, const int num); +void dwc2_flush_rx_fifo(struct dwc2_hsotg *hsotg); + +void dwc2_enable_global_interrupts(struct dwc2_hsotg *hcd); +void dwc2_disable_global_interrupts(struct dwc2_hsotg *hcd); + +void dwc2_hib_restore_common(struct dwc2_hsotg *hsotg, int rem_wakeup, + int is_host); +int dwc2_backup_global_registers(struct dwc2_hsotg *hsotg); +int dwc2_restore_global_registers(struct dwc2_hsotg *hsotg); + +void dwc2_enable_acg(struct dwc2_hsotg *hsotg); + +/* This function should be called on every hardware interrupt. */ +irqreturn_t dwc2_handle_common_intr(int irq, void *dev); + +/* The device ID match table */ +extern const struct of_device_id dwc2_of_match_table[]; +extern const struct acpi_device_id dwc2_acpi_match[]; +extern const struct pci_device_id dwc2_pci_ids[]; + +int dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg); +int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg); + +/* Common polling functions */ +int dwc2_hsotg_wait_bit_set(struct dwc2_hsotg *hs_otg, u32 reg, u32 bit, + u32 timeout); +int dwc2_hsotg_wait_bit_clear(struct dwc2_hsotg *hs_otg, u32 reg, u32 bit, + u32 timeout); +/* Parameters */ +int dwc2_get_hwparams(struct dwc2_hsotg *hsotg); +int dwc2_init_params(struct dwc2_hsotg *hsotg); + +/* + * The following functions check the controller's OTG operation mode + * capability (GHWCFG2.OTG_MODE). + * + * These functions can be used before the internal hsotg->hw_params + * are read in and cached so they always read directly from the + * GHWCFG2 register. + */ +unsigned int dwc2_op_mode(struct dwc2_hsotg *hsotg); +bool dwc2_hw_is_otg(struct dwc2_hsotg *hsotg); +bool dwc2_hw_is_host(struct dwc2_hsotg *hsotg); +bool dwc2_hw_is_device(struct dwc2_hsotg *hsotg); + +/* + * Returns the mode of operation, host or device + */ +static inline int dwc2_is_host_mode(struct dwc2_hsotg *hsotg) +{ + return (dwc2_readl(hsotg, GINTSTS) & GINTSTS_CURMODE_HOST) != 0; +} + +static inline int dwc2_is_device_mode(struct dwc2_hsotg *hsotg) +{ + return (dwc2_readl(hsotg, GINTSTS) & GINTSTS_CURMODE_HOST) == 0; +} + +int dwc2_drd_init(struct dwc2_hsotg *hsotg); +void dwc2_drd_suspend(struct dwc2_hsotg *hsotg); +void dwc2_drd_resume(struct dwc2_hsotg *hsotg); +void dwc2_drd_exit(struct dwc2_hsotg *hsotg); + +/* + * Dump core registers and SPRAM + */ +void dwc2_dump_dev_registers(struct dwc2_hsotg *hsotg); +void dwc2_dump_host_registers(struct dwc2_hsotg *hsotg); +void dwc2_dump_global_registers(struct dwc2_hsotg *hsotg); + +/* Gadget defines */ +#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \ + IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) +int dwc2_hsotg_remove(struct dwc2_hsotg *hsotg); +int dwc2_hsotg_suspend(struct dwc2_hsotg *dwc2); +int dwc2_hsotg_resume(struct dwc2_hsotg *dwc2); +int dwc2_gadget_init(struct dwc2_hsotg *hsotg); +void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *dwc2, + bool reset); +void dwc2_hsotg_core_disconnect(struct dwc2_hsotg *hsotg); +void dwc2_hsotg_core_connect(struct dwc2_hsotg *hsotg); +void dwc2_hsotg_disconnect(struct dwc2_hsotg *dwc2); +int dwc2_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, int testmode); +#define dwc2_is_device_connected(hsotg) (hsotg->connected) +#define dwc2_is_device_enabled(hsotg) (hsotg->enabled) +int dwc2_backup_device_registers(struct dwc2_hsotg *hsotg); +int dwc2_restore_device_registers(struct dwc2_hsotg *hsotg, int remote_wakeup); +int dwc2_gadget_enter_hibernation(struct dwc2_hsotg *hsotg); +int dwc2_gadget_exit_hibernation(struct dwc2_hsotg *hsotg, + int rem_wakeup, int reset); +int dwc2_gadget_enter_partial_power_down(struct dwc2_hsotg *hsotg); +int dwc2_gadget_exit_partial_power_down(struct dwc2_hsotg *hsotg, + bool restore); +void dwc2_gadget_enter_clock_gating(struct dwc2_hsotg *hsotg); +void dwc2_gadget_exit_clock_gating(struct dwc2_hsotg *hsotg, + int rem_wakeup); +int dwc2_hsotg_tx_fifo_count(struct dwc2_hsotg *hsotg); +int dwc2_hsotg_tx_fifo_total_depth(struct dwc2_hsotg *hsotg); +int dwc2_hsotg_tx_fifo_average_depth(struct dwc2_hsotg *hsotg); +void dwc2_gadget_init_lpm(struct dwc2_hsotg *hsotg); +void dwc2_gadget_program_ref_clk(struct dwc2_hsotg *hsotg); +static inline void dwc2_clear_fifo_map(struct dwc2_hsotg *hsotg) +{ hsotg->fifo_map = 0; } +#else +static inline int dwc2_hsotg_remove(struct dwc2_hsotg *dwc2) +{ return 0; } +static inline int dwc2_hsotg_suspend(struct dwc2_hsotg *dwc2) +{ return 0; } +static inline int dwc2_hsotg_resume(struct dwc2_hsotg *dwc2) +{ return 0; } +static inline int dwc2_gadget_init(struct dwc2_hsotg *hsotg) +{ return 0; } +static inline void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *dwc2, + bool reset) {} +static inline void dwc2_hsotg_core_disconnect(struct dwc2_hsotg *hsotg) {} +static inline void dwc2_hsotg_core_connect(struct dwc2_hsotg *hsotg) {} +static inline void dwc2_hsotg_disconnect(struct dwc2_hsotg *dwc2) {} +static inline int dwc2_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, + int testmode) +{ return 0; } +#define dwc2_is_device_connected(hsotg) (0) +#define dwc2_is_device_enabled(hsotg) (0) +static inline int dwc2_backup_device_registers(struct dwc2_hsotg *hsotg) +{ return 0; } +static inline int dwc2_restore_device_registers(struct dwc2_hsotg *hsotg, + int remote_wakeup) +{ return 0; } +static inline int dwc2_gadget_enter_hibernation(struct dwc2_hsotg *hsotg) +{ return 0; } +static inline int dwc2_gadget_exit_hibernation(struct dwc2_hsotg *hsotg, + int rem_wakeup, int reset) +{ return 0; } +static inline int dwc2_gadget_enter_partial_power_down(struct dwc2_hsotg *hsotg) +{ return 0; } +static inline int dwc2_gadget_exit_partial_power_down(struct dwc2_hsotg *hsotg, + bool restore) +{ return 0; } +static inline void dwc2_gadget_enter_clock_gating(struct dwc2_hsotg *hsotg) {} +static inline void dwc2_gadget_exit_clock_gating(struct dwc2_hsotg *hsotg, + int rem_wakeup) {} +static inline int dwc2_hsotg_tx_fifo_count(struct dwc2_hsotg *hsotg) +{ return 0; } +static inline int dwc2_hsotg_tx_fifo_total_depth(struct dwc2_hsotg *hsotg) +{ return 0; } +static inline int dwc2_hsotg_tx_fifo_average_depth(struct dwc2_hsotg *hsotg) +{ return 0; } +static inline void dwc2_gadget_init_lpm(struct dwc2_hsotg *hsotg) {} +static inline void dwc2_gadget_program_ref_clk(struct dwc2_hsotg *hsotg) {} +static inline void dwc2_clear_fifo_map(struct dwc2_hsotg *hsotg) {} +#endif + +#if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) +int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg); +int dwc2_hcd_get_future_frame_number(struct dwc2_hsotg *hsotg, int us); +void dwc2_hcd_connect(struct dwc2_hsotg *hsotg); +void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg, bool force); +void dwc2_hcd_start(struct dwc2_hsotg *hsotg); +int dwc2_core_init(struct dwc2_hsotg *hsotg, bool initial_setup); +int dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex); +int dwc2_port_resume(struct dwc2_hsotg *hsotg); +int dwc2_backup_host_registers(struct dwc2_hsotg *hsotg); +int dwc2_restore_host_registers(struct dwc2_hsotg *hsotg); +int dwc2_host_enter_hibernation(struct dwc2_hsotg *hsotg); +int dwc2_host_exit_hibernation(struct dwc2_hsotg *hsotg, + int rem_wakeup, int reset); +int dwc2_host_enter_partial_power_down(struct dwc2_hsotg *hsotg); +int dwc2_host_exit_partial_power_down(struct dwc2_hsotg *hsotg, + int rem_wakeup, bool restore); +void dwc2_host_enter_clock_gating(struct dwc2_hsotg *hsotg); +void dwc2_host_exit_clock_gating(struct dwc2_hsotg *hsotg, int rem_wakeup); +bool dwc2_host_can_poweroff_phy(struct dwc2_hsotg *dwc2); +static inline void dwc2_host_schedule_phy_reset(struct dwc2_hsotg *hsotg) +{ schedule_work(&hsotg->phy_reset_work); } +#else +static inline int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg) +{ return 0; } +static inline int dwc2_hcd_get_future_frame_number(struct dwc2_hsotg *hsotg, + int us) +{ return 0; } +static inline void dwc2_hcd_connect(struct dwc2_hsotg *hsotg) {} +static inline void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg, bool force) {} +static inline void dwc2_hcd_start(struct dwc2_hsotg *hsotg) {} +static inline void dwc2_hcd_remove(struct dwc2_hsotg *hsotg) {} +static inline int dwc2_core_init(struct dwc2_hsotg *hsotg, bool initial_setup) +{ return 0; } +static inline int dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex) +{ return 0; } +static inline int dwc2_port_resume(struct dwc2_hsotg *hsotg) +{ return 0; } +static inline int dwc2_hcd_init(struct dwc2_hsotg *hsotg) +{ return 0; } +static inline int dwc2_backup_host_registers(struct dwc2_hsotg *hsotg) +{ return 0; } +static inline int dwc2_restore_host_registers(struct dwc2_hsotg *hsotg) +{ return 0; } +static inline int dwc2_host_enter_hibernation(struct dwc2_hsotg *hsotg) +{ return 0; } +static inline int dwc2_host_exit_hibernation(struct dwc2_hsotg *hsotg, + int rem_wakeup, int reset) +{ return 0; } +static inline int dwc2_host_enter_partial_power_down(struct dwc2_hsotg *hsotg) +{ return 0; } +static inline int dwc2_host_exit_partial_power_down(struct dwc2_hsotg *hsotg, + int rem_wakeup, bool restore) +{ return 0; } +static inline void dwc2_host_enter_clock_gating(struct dwc2_hsotg *hsotg) {} +static inline void dwc2_host_exit_clock_gating(struct dwc2_hsotg *hsotg, + int rem_wakeup) {} +static inline bool dwc2_host_can_poweroff_phy(struct dwc2_hsotg *dwc2) +{ return false; } +static inline void dwc2_host_schedule_phy_reset(struct dwc2_hsotg *hsotg) {} + +#endif + +#endif /* __DWC2_CORE_H__ */ diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c new file mode 100644 index 0000000000..158ede7538 --- /dev/null +++ b/drivers/usb/dwc2/core_intr.c @@ -0,0 +1,865 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * core_intr.c - DesignWare HS OTG Controller common interrupt handling + * + * Copyright (C) 2004-2013 Synopsys, Inc. + */ + +/* + * This file contains the common interrupt handlers + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/usb.h> + +#include <linux/usb/hcd.h> +#include <linux/usb/ch11.h> + +#include "core.h" +#include "hcd.h" + +static const char *dwc2_op_state_str(struct dwc2_hsotg *hsotg) +{ + switch (hsotg->op_state) { + case OTG_STATE_A_HOST: + return "a_host"; + case OTG_STATE_A_SUSPEND: + return "a_suspend"; + case OTG_STATE_A_PERIPHERAL: + return "a_peripheral"; + case OTG_STATE_B_PERIPHERAL: + return "b_peripheral"; + case OTG_STATE_B_HOST: + return "b_host"; + default: + return "unknown"; + } +} + +/** + * dwc2_handle_usb_port_intr - handles OTG PRTINT interrupts. + * When the PRTINT interrupt fires, there are certain status bits in the Host + * Port that needs to get cleared. + * + * @hsotg: Programming view of DWC_otg controller + */ +static void dwc2_handle_usb_port_intr(struct dwc2_hsotg *hsotg) +{ + u32 hprt0 = dwc2_readl(hsotg, HPRT0); + + if (hprt0 & HPRT0_ENACHG) { + hprt0 &= ~HPRT0_ENA; + dwc2_writel(hsotg, hprt0, HPRT0); + } +} + +/** + * dwc2_handle_mode_mismatch_intr() - Logs a mode mismatch warning message + * + * @hsotg: Programming view of DWC_otg controller + */ +static void dwc2_handle_mode_mismatch_intr(struct dwc2_hsotg *hsotg) +{ + /* Clear interrupt */ + dwc2_writel(hsotg, GINTSTS_MODEMIS, GINTSTS); + + dev_warn(hsotg->dev, "Mode Mismatch Interrupt: currently in %s mode\n", + dwc2_is_host_mode(hsotg) ? "Host" : "Device"); +} + +/** + * dwc2_handle_otg_intr() - Handles the OTG Interrupts. It reads the OTG + * Interrupt Register (GOTGINT) to determine what interrupt has occurred. + * + * @hsotg: Programming view of DWC_otg controller + */ +static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg) +{ + u32 gotgint; + u32 gotgctl; + u32 gintmsk; + + gotgint = dwc2_readl(hsotg, GOTGINT); + gotgctl = dwc2_readl(hsotg, GOTGCTL); + dev_dbg(hsotg->dev, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint, + dwc2_op_state_str(hsotg)); + + if (gotgint & GOTGINT_SES_END_DET) { + dev_dbg(hsotg->dev, + " ++OTG Interrupt: Session End Detected++ (%s)\n", + dwc2_op_state_str(hsotg)); + gotgctl = dwc2_readl(hsotg, GOTGCTL); + + if (dwc2_is_device_mode(hsotg)) + dwc2_hsotg_disconnect(hsotg); + + if (hsotg->op_state == OTG_STATE_B_HOST) { + hsotg->op_state = OTG_STATE_B_PERIPHERAL; + } else { + /* + * If not B_HOST and Device HNP still set, HNP did + * not succeed! + */ + if (gotgctl & GOTGCTL_DEVHNPEN) { + dev_dbg(hsotg->dev, "Session End Detected\n"); + dev_err(hsotg->dev, + "Device Not Connected/Responding!\n"); + } + + /* + * If Session End Detected the B-Cable has been + * disconnected + */ + /* Reset to a clean state */ + hsotg->lx_state = DWC2_L0; + } + + gotgctl = dwc2_readl(hsotg, GOTGCTL); + gotgctl &= ~GOTGCTL_DEVHNPEN; + dwc2_writel(hsotg, gotgctl, GOTGCTL); + } + + if (gotgint & GOTGINT_SES_REQ_SUC_STS_CHNG) { + dev_dbg(hsotg->dev, + " ++OTG Interrupt: Session Request Success Status Change++\n"); + gotgctl = dwc2_readl(hsotg, GOTGCTL); + if (gotgctl & GOTGCTL_SESREQSCS) { + if (hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS && + hsotg->params.i2c_enable) { + hsotg->srp_success = 1; + } else { + /* Clear Session Request */ + gotgctl = dwc2_readl(hsotg, GOTGCTL); + gotgctl &= ~GOTGCTL_SESREQ; + dwc2_writel(hsotg, gotgctl, GOTGCTL); + } + } + } + + if (gotgint & GOTGINT_HST_NEG_SUC_STS_CHNG) { + /* + * Print statements during the HNP interrupt handling + * can cause it to fail + */ + gotgctl = dwc2_readl(hsotg, GOTGCTL); + /* + * WA for 3.00a- HW is not setting cur_mode, even sometimes + * this does not help + */ + if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a) + udelay(100); + if (gotgctl & GOTGCTL_HSTNEGSCS) { + if (dwc2_is_host_mode(hsotg)) { + hsotg->op_state = OTG_STATE_B_HOST; + /* + * Need to disable SOF interrupt immediately. + * When switching from device to host, the PCD + * interrupt handler won't handle the interrupt + * if host mode is already set. The HCD + * interrupt handler won't get called if the + * HCD state is HALT. This means that the + * interrupt does not get handled and Linux + * complains loudly. + */ + gintmsk = dwc2_readl(hsotg, GINTMSK); + gintmsk &= ~GINTSTS_SOF; + dwc2_writel(hsotg, gintmsk, GINTMSK); + + /* + * Call callback function with spin lock + * released + */ + spin_unlock(&hsotg->lock); + + /* Initialize the Core for Host mode */ + dwc2_hcd_start(hsotg); + spin_lock(&hsotg->lock); + hsotg->op_state = OTG_STATE_B_HOST; + } + } else { + gotgctl = dwc2_readl(hsotg, GOTGCTL); + gotgctl &= ~(GOTGCTL_HNPREQ | GOTGCTL_DEVHNPEN); + dwc2_writel(hsotg, gotgctl, GOTGCTL); + dev_dbg(hsotg->dev, "HNP Failed\n"); + dev_err(hsotg->dev, + "Device Not Connected/Responding\n"); + } + } + + if (gotgint & GOTGINT_HST_NEG_DET) { + /* + * The disconnect interrupt is set at the same time as + * Host Negotiation Detected. During the mode switch all + * interrupts are cleared so the disconnect interrupt + * handler will not get executed. + */ + dev_dbg(hsotg->dev, + " ++OTG Interrupt: Host Negotiation Detected++ (%s)\n", + (dwc2_is_host_mode(hsotg) ? "Host" : "Device")); + if (dwc2_is_device_mode(hsotg)) { + dev_dbg(hsotg->dev, "a_suspend->a_peripheral (%d)\n", + hsotg->op_state); + spin_unlock(&hsotg->lock); + dwc2_hcd_disconnect(hsotg, false); + spin_lock(&hsotg->lock); + hsotg->op_state = OTG_STATE_A_PERIPHERAL; + } else { + /* Need to disable SOF interrupt immediately */ + gintmsk = dwc2_readl(hsotg, GINTMSK); + gintmsk &= ~GINTSTS_SOF; + dwc2_writel(hsotg, gintmsk, GINTMSK); + spin_unlock(&hsotg->lock); + dwc2_hcd_start(hsotg); + spin_lock(&hsotg->lock); + hsotg->op_state = OTG_STATE_A_HOST; + } + } + + if (gotgint & GOTGINT_A_DEV_TOUT_CHG) + dev_dbg(hsotg->dev, + " ++OTG Interrupt: A-Device Timeout Change++\n"); + if (gotgint & GOTGINT_DBNCE_DONE) + dev_dbg(hsotg->dev, " ++OTG Interrupt: Debounce Done++\n"); + + /* Clear GOTGINT */ + dwc2_writel(hsotg, gotgint, GOTGINT); +} + +/** + * dwc2_handle_conn_id_status_change_intr() - Handles the Connector ID Status + * Change Interrupt + * + * @hsotg: Programming view of DWC_otg controller + * + * Reads the OTG Interrupt Register (GOTCTL) to determine whether this is a + * Device to Host Mode transition or a Host to Device Mode transition. This only + * occurs when the cable is connected/removed from the PHY connector. + */ +static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg) +{ + u32 gintmsk; + + /* Clear interrupt */ + dwc2_writel(hsotg, GINTSTS_CONIDSTSCHNG, GINTSTS); + + /* Need to disable SOF interrupt immediately */ + gintmsk = dwc2_readl(hsotg, GINTMSK); + gintmsk &= ~GINTSTS_SOF; + dwc2_writel(hsotg, gintmsk, GINTMSK); + + dev_dbg(hsotg->dev, " ++Connector ID Status Change Interrupt++ (%s)\n", + dwc2_is_host_mode(hsotg) ? "Host" : "Device"); + + /* + * Need to schedule a work, as there are possible DELAY function calls. + */ + if (hsotg->wq_otg) + queue_work(hsotg->wq_otg, &hsotg->wf_otg); +} + +/** + * dwc2_handle_session_req_intr() - This interrupt indicates that a device is + * initiating the Session Request Protocol to request the host to turn on bus + * power so a new session can begin + * + * @hsotg: Programming view of DWC_otg controller + * + * This handler responds by turning on bus power. If the DWC_otg controller is + * in low power mode, this handler brings the controller out of low power mode + * before turning on bus power. + */ +static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg) +{ + int ret; + u32 hprt0; + + /* Clear interrupt */ + dwc2_writel(hsotg, GINTSTS_SESSREQINT, GINTSTS); + + dev_dbg(hsotg->dev, "Session request interrupt - lx_state=%d\n", + hsotg->lx_state); + + if (dwc2_is_device_mode(hsotg)) { + if (hsotg->lx_state == DWC2_L2) { + if (hsotg->in_ppd) { + ret = dwc2_exit_partial_power_down(hsotg, 0, + true); + if (ret) + dev_err(hsotg->dev, + "exit power_down failed\n"); + } + + /* Exit gadget mode clock gating. */ + if (hsotg->params.power_down == + DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended) + dwc2_gadget_exit_clock_gating(hsotg, 0); + } + + /* + * Report disconnect if there is any previous session + * established + */ + dwc2_hsotg_disconnect(hsotg); + } else { + /* Turn on the port power bit. */ + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 |= HPRT0_PWR; + dwc2_writel(hsotg, hprt0, HPRT0); + /* Connect hcd after port power is set. */ + dwc2_hcd_connect(hsotg); + } +} + +/** + * dwc2_wakeup_from_lpm_l1 - Exit the device from LPM L1 state + * + * @hsotg: Programming view of DWC_otg controller + * + */ +static void dwc2_wakeup_from_lpm_l1(struct dwc2_hsotg *hsotg) +{ + u32 glpmcfg; + u32 i = 0; + + if (hsotg->lx_state != DWC2_L1) { + dev_err(hsotg->dev, "Core isn't in DWC2_L1 state\n"); + return; + } + + glpmcfg = dwc2_readl(hsotg, GLPMCFG); + if (dwc2_is_device_mode(hsotg)) { + dev_dbg(hsotg->dev, "Exit from L1 state\n"); + glpmcfg &= ~GLPMCFG_ENBLSLPM; + glpmcfg &= ~GLPMCFG_HIRD_THRES_EN; + dwc2_writel(hsotg, glpmcfg, GLPMCFG); + + do { + glpmcfg = dwc2_readl(hsotg, GLPMCFG); + + if (!(glpmcfg & (GLPMCFG_COREL1RES_MASK | + GLPMCFG_L1RESUMEOK | GLPMCFG_SLPSTS))) + break; + + udelay(1); + } while (++i < 200); + + if (i == 200) { + dev_err(hsotg->dev, "Failed to exit L1 sleep state in 200us.\n"); + return; + } + dwc2_gadget_init_lpm(hsotg); + } else { + /* TODO */ + dev_err(hsotg->dev, "Host side LPM is not supported.\n"); + return; + } + + /* Change to L0 state */ + hsotg->lx_state = DWC2_L0; + + /* Inform gadget to exit from L1 */ + call_gadget(hsotg, resume); +} + +/* + * This interrupt indicates that the DWC_otg controller has detected a + * resume or remote wakeup sequence. If the DWC_otg controller is in + * low power mode, the handler must brings the controller out of low + * power mode. The controller automatically begins resume signaling. + * The handler schedules a time to stop resume signaling. + */ +static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg) +{ + int ret; + + /* Clear interrupt */ + dwc2_writel(hsotg, GINTSTS_WKUPINT, GINTSTS); + + dev_dbg(hsotg->dev, "++Resume or Remote Wakeup Detected Interrupt++\n"); + dev_dbg(hsotg->dev, "%s lxstate = %d\n", __func__, hsotg->lx_state); + + if (hsotg->lx_state == DWC2_L1) { + dwc2_wakeup_from_lpm_l1(hsotg); + return; + } + + if (dwc2_is_device_mode(hsotg)) { + dev_dbg(hsotg->dev, "DSTS=0x%0x\n", + dwc2_readl(hsotg, DSTS)); + if (hsotg->lx_state == DWC2_L2) { + if (hsotg->in_ppd) { + u32 dctl = dwc2_readl(hsotg, DCTL); + /* Clear Remote Wakeup Signaling */ + dctl &= ~DCTL_RMTWKUPSIG; + dwc2_writel(hsotg, dctl, DCTL); + ret = dwc2_exit_partial_power_down(hsotg, 1, + true); + if (ret) + dev_err(hsotg->dev, + "exit partial_power_down failed\n"); + call_gadget(hsotg, resume); + } + + /* Exit gadget mode clock gating. */ + if (hsotg->params.power_down == + DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended) + dwc2_gadget_exit_clock_gating(hsotg, 0); + } else { + /* Change to L0 state */ + hsotg->lx_state = DWC2_L0; + } + } else { + if (hsotg->lx_state == DWC2_L2) { + if (hsotg->in_ppd) { + ret = dwc2_exit_partial_power_down(hsotg, 1, + true); + if (ret) + dev_err(hsotg->dev, + "exit partial_power_down failed\n"); + } + + if (hsotg->params.power_down == + DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended) + dwc2_host_exit_clock_gating(hsotg, 1); + + /* + * If we've got this quirk then the PHY is stuck upon + * wakeup. Assert reset. This will propagate out and + * eventually we'll re-enumerate the device. Not great + * but the best we can do. We can't call phy_reset() + * at interrupt time but there's no hurry, so we'll + * schedule it for later. + */ + if (hsotg->reset_phy_on_wake) + dwc2_host_schedule_phy_reset(hsotg); + + mod_timer(&hsotg->wkp_timer, + jiffies + msecs_to_jiffies(71)); + } else { + /* Change to L0 state */ + hsotg->lx_state = DWC2_L0; + } + } +} + +/* + * This interrupt indicates that a device has been disconnected from the + * root port + */ +static void dwc2_handle_disconnect_intr(struct dwc2_hsotg *hsotg) +{ + dwc2_writel(hsotg, GINTSTS_DISCONNINT, GINTSTS); + + dev_dbg(hsotg->dev, "++Disconnect Detected Interrupt++ (%s) %s\n", + dwc2_is_host_mode(hsotg) ? "Host" : "Device", + dwc2_op_state_str(hsotg)); + + if (hsotg->op_state == OTG_STATE_A_HOST) + dwc2_hcd_disconnect(hsotg, false); +} + +/* + * This interrupt indicates that SUSPEND state has been detected on the USB. + * + * For HNP the USB Suspend interrupt signals the change from "a_peripheral" + * to "a_host". + * + * When power management is enabled the core will be put in low power mode. + */ +static void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg *hsotg) +{ + u32 dsts; + int ret; + + /* Clear interrupt */ + dwc2_writel(hsotg, GINTSTS_USBSUSP, GINTSTS); + + dev_dbg(hsotg->dev, "USB SUSPEND\n"); + + if (dwc2_is_device_mode(hsotg)) { + /* + * Check the Device status register to determine if the Suspend + * state is active + */ + dsts = dwc2_readl(hsotg, DSTS); + dev_dbg(hsotg->dev, "%s: DSTS=0x%0x\n", __func__, dsts); + dev_dbg(hsotg->dev, + "DSTS.Suspend Status=%d HWCFG4.Power Optimize=%d HWCFG4.Hibernation=%d\n", + !!(dsts & DSTS_SUSPSTS), + hsotg->hw_params.power_optimized, + hsotg->hw_params.hibernation); + + /* Ignore suspend request before enumeration */ + if (!dwc2_is_device_connected(hsotg)) { + dev_dbg(hsotg->dev, + "ignore suspend request before enumeration\n"); + return; + } + if (dsts & DSTS_SUSPSTS) { + switch (hsotg->params.power_down) { + case DWC2_POWER_DOWN_PARAM_PARTIAL: + ret = dwc2_enter_partial_power_down(hsotg); + if (ret) + dev_err(hsotg->dev, + "enter partial_power_down failed\n"); + + udelay(100); + + /* Ask phy to be suspended */ + if (!IS_ERR_OR_NULL(hsotg->uphy)) + usb_phy_set_suspend(hsotg->uphy, true); + break; + case DWC2_POWER_DOWN_PARAM_HIBERNATION: + ret = dwc2_enter_hibernation(hsotg, 0); + if (ret) + dev_err(hsotg->dev, + "enter hibernation failed\n"); + break; + case DWC2_POWER_DOWN_PARAM_NONE: + /* + * If neither hibernation nor partial power down are supported, + * clock gating is used to save power. + */ + if (!hsotg->params.no_clock_gating) + dwc2_gadget_enter_clock_gating(hsotg); + } + + /* + * Change to L2 (suspend) state before releasing + * spinlock + */ + hsotg->lx_state = DWC2_L2; + + /* Call gadget suspend callback */ + call_gadget(hsotg, suspend); + } + } else { + if (hsotg->op_state == OTG_STATE_A_PERIPHERAL) { + dev_dbg(hsotg->dev, "a_peripheral->a_host\n"); + + /* Change to L2 (suspend) state */ + hsotg->lx_state = DWC2_L2; + /* Clear the a_peripheral flag, back to a_host */ + spin_unlock(&hsotg->lock); + dwc2_hcd_start(hsotg); + spin_lock(&hsotg->lock); + hsotg->op_state = OTG_STATE_A_HOST; + } + } +} + +/** + * dwc2_handle_lpm_intr - GINTSTS_LPMTRANRCVD Interrupt handler + * + * @hsotg: Programming view of DWC_otg controller + * + */ +static void dwc2_handle_lpm_intr(struct dwc2_hsotg *hsotg) +{ + u32 glpmcfg; + u32 pcgcctl; + u32 hird; + u32 hird_thres; + u32 hird_thres_en; + u32 enslpm; + + /* Clear interrupt */ + dwc2_writel(hsotg, GINTSTS_LPMTRANRCVD, GINTSTS); + + glpmcfg = dwc2_readl(hsotg, GLPMCFG); + + if (!(glpmcfg & GLPMCFG_LPMCAP)) { + dev_err(hsotg->dev, "Unexpected LPM interrupt\n"); + return; + } + + hird = (glpmcfg & GLPMCFG_HIRD_MASK) >> GLPMCFG_HIRD_SHIFT; + hird_thres = (glpmcfg & GLPMCFG_HIRD_THRES_MASK & + ~GLPMCFG_HIRD_THRES_EN) >> GLPMCFG_HIRD_THRES_SHIFT; + hird_thres_en = glpmcfg & GLPMCFG_HIRD_THRES_EN; + enslpm = glpmcfg & GLPMCFG_ENBLSLPM; + + if (dwc2_is_device_mode(hsotg)) { + dev_dbg(hsotg->dev, "HIRD_THRES_EN = %d\n", hird_thres_en); + + if (hird_thres_en && hird >= hird_thres) { + dev_dbg(hsotg->dev, "L1 with utmi_l1_suspend_n\n"); + } else if (enslpm) { + dev_dbg(hsotg->dev, "L1 with utmi_sleep_n\n"); + } else { + dev_dbg(hsotg->dev, "Entering Sleep with L1 Gating\n"); + + pcgcctl = dwc2_readl(hsotg, PCGCTL); + pcgcctl |= PCGCTL_ENBL_SLEEP_GATING; + dwc2_writel(hsotg, pcgcctl, PCGCTL); + } + /** + * Examine prt_sleep_sts after TL1TokenTetry period max (10 us) + */ + udelay(10); + + glpmcfg = dwc2_readl(hsotg, GLPMCFG); + + if (glpmcfg & GLPMCFG_SLPSTS) { + /* Save the current state */ + hsotg->lx_state = DWC2_L1; + dev_dbg(hsotg->dev, + "Core is in L1 sleep glpmcfg=%08x\n", glpmcfg); + + /* Inform gadget that we are in L1 state */ + call_gadget(hsotg, suspend); + } + } +} + +#define GINTMSK_COMMON (GINTSTS_WKUPINT | GINTSTS_SESSREQINT | \ + GINTSTS_CONIDSTSCHNG | GINTSTS_OTGINT | \ + GINTSTS_MODEMIS | GINTSTS_DISCONNINT | \ + GINTSTS_USBSUSP | GINTSTS_PRTINT | \ + GINTSTS_LPMTRANRCVD) + +/* + * This function returns the Core Interrupt register + */ +static u32 dwc2_read_common_intr(struct dwc2_hsotg *hsotg) +{ + u32 gintsts; + u32 gintmsk; + u32 gahbcfg; + u32 gintmsk_common = GINTMSK_COMMON; + + gintsts = dwc2_readl(hsotg, GINTSTS); + gintmsk = dwc2_readl(hsotg, GINTMSK); + gahbcfg = dwc2_readl(hsotg, GAHBCFG); + + /* If any common interrupts set */ + if (gintsts & gintmsk_common) + dev_dbg(hsotg->dev, "gintsts=%08x gintmsk=%08x\n", + gintsts, gintmsk); + + if (gahbcfg & GAHBCFG_GLBL_INTR_EN) + return gintsts & gintmsk & gintmsk_common; + else + return 0; +} + +/** + * dwc_handle_gpwrdn_disc_det() - Handles the gpwrdn disconnect detect. + * Exits hibernation without restoring registers. + * + * @hsotg: Programming view of DWC_otg controller + * @gpwrdn: GPWRDN register + */ +static inline void dwc_handle_gpwrdn_disc_det(struct dwc2_hsotg *hsotg, + u32 gpwrdn) +{ + u32 gpwrdn_tmp; + + /* Switch-on voltage to the core */ + gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN); + gpwrdn_tmp &= ~GPWRDN_PWRDNSWTCH; + dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN); + udelay(5); + + /* Reset core */ + gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN); + gpwrdn_tmp &= ~GPWRDN_PWRDNRSTN; + dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN); + udelay(5); + + /* Disable Power Down Clamp */ + gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN); + gpwrdn_tmp &= ~GPWRDN_PWRDNCLMP; + dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN); + udelay(5); + + /* Deassert reset core */ + gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN); + gpwrdn_tmp |= GPWRDN_PWRDNRSTN; + dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN); + udelay(5); + + /* Disable PMU interrupt */ + gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN); + gpwrdn_tmp &= ~GPWRDN_PMUINTSEL; + dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN); + + /* De-assert Wakeup Logic */ + gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN); + gpwrdn_tmp &= ~GPWRDN_PMUACTV; + dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN); + + hsotg->hibernated = 0; + hsotg->bus_suspended = 0; + + if (gpwrdn & GPWRDN_IDSTS) { + hsotg->op_state = OTG_STATE_B_PERIPHERAL; + dwc2_core_init(hsotg, false); + dwc2_enable_global_interrupts(hsotg); + dwc2_hsotg_core_init_disconnected(hsotg, false); + dwc2_hsotg_core_connect(hsotg); + } else { + hsotg->op_state = OTG_STATE_A_HOST; + + /* Initialize the Core for Host mode */ + dwc2_core_init(hsotg, false); + dwc2_enable_global_interrupts(hsotg); + dwc2_hcd_start(hsotg); + } +} + +/* + * GPWRDN interrupt handler. + * + * The GPWRDN interrupts are those that occur in both Host and + * Device mode while core is in hibernated state. + */ +static int dwc2_handle_gpwrdn_intr(struct dwc2_hsotg *hsotg) +{ + u32 gpwrdn; + int linestate; + int ret = 0; + + gpwrdn = dwc2_readl(hsotg, GPWRDN); + /* clear all interrupt */ + dwc2_writel(hsotg, gpwrdn, GPWRDN); + linestate = (gpwrdn & GPWRDN_LINESTATE_MASK) >> GPWRDN_LINESTATE_SHIFT; + dev_dbg(hsotg->dev, + "%s: dwc2_handle_gpwrdwn_intr called gpwrdn= %08x\n", __func__, + gpwrdn); + + if ((gpwrdn & GPWRDN_DISCONN_DET) && + (gpwrdn & GPWRDN_DISCONN_DET_MSK) && !linestate) { + dev_dbg(hsotg->dev, "%s: GPWRDN_DISCONN_DET\n", __func__); + /* + * Call disconnect detect function to exit from + * hibernation + */ + dwc_handle_gpwrdn_disc_det(hsotg, gpwrdn); + } else if ((gpwrdn & GPWRDN_LNSTSCHG) && + (gpwrdn & GPWRDN_LNSTSCHG_MSK) && linestate) { + dev_dbg(hsotg->dev, "%s: GPWRDN_LNSTSCHG\n", __func__); + if (hsotg->hw_params.hibernation && + hsotg->hibernated) { + if (gpwrdn & GPWRDN_IDSTS) { + ret = dwc2_exit_hibernation(hsotg, 0, 0, 0); + if (ret) + dev_err(hsotg->dev, + "exit hibernation failed.\n"); + call_gadget(hsotg, resume); + } else { + ret = dwc2_exit_hibernation(hsotg, 1, 0, 1); + if (ret) + dev_err(hsotg->dev, + "exit hibernation failed.\n"); + } + } + } else if ((gpwrdn & GPWRDN_RST_DET) && + (gpwrdn & GPWRDN_RST_DET_MSK)) { + dev_dbg(hsotg->dev, "%s: GPWRDN_RST_DET\n", __func__); + if (!linestate) { + ret = dwc2_exit_hibernation(hsotg, 0, 1, 0); + if (ret) + dev_err(hsotg->dev, + "exit hibernation failed.\n"); + } + } else if ((gpwrdn & GPWRDN_STS_CHGINT) && + (gpwrdn & GPWRDN_STS_CHGINT_MSK)) { + dev_dbg(hsotg->dev, "%s: GPWRDN_STS_CHGINT\n", __func__); + /* + * As GPWRDN_STS_CHGINT exit from hibernation flow is + * the same as in GPWRDN_DISCONN_DET flow. Call + * disconnect detect helper function to exit from + * hibernation. + */ + dwc_handle_gpwrdn_disc_det(hsotg, gpwrdn); + } + + return ret; +} + +/* + * Common interrupt handler + * + * The common interrupts are those that occur in both Host and Device mode. + * This handler handles the following interrupts: + * - Mode Mismatch Interrupt + * - OTG Interrupt + * - Connector ID Status Change Interrupt + * - Disconnect Interrupt + * - Session Request Interrupt + * - Resume / Remote Wakeup Detected Interrupt + * - Suspend Interrupt + */ +irqreturn_t dwc2_handle_common_intr(int irq, void *dev) +{ + struct dwc2_hsotg *hsotg = dev; + u32 gintsts; + irqreturn_t retval = IRQ_NONE; + + spin_lock(&hsotg->lock); + + if (!dwc2_is_controller_alive(hsotg)) { + dev_warn(hsotg->dev, "Controller is dead\n"); + goto out; + } + + /* Reading current frame number value in device or host modes. */ + if (dwc2_is_device_mode(hsotg)) + hsotg->frame_number = (dwc2_readl(hsotg, DSTS) + & DSTS_SOFFN_MASK) >> DSTS_SOFFN_SHIFT; + else + hsotg->frame_number = (dwc2_readl(hsotg, HFNUM) + & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT; + + gintsts = dwc2_read_common_intr(hsotg); + if (gintsts & ~GINTSTS_PRTINT) + retval = IRQ_HANDLED; + + /* In case of hibernated state gintsts must not work */ + if (hsotg->hibernated) { + dwc2_handle_gpwrdn_intr(hsotg); + retval = IRQ_HANDLED; + goto out; + } + + if (gintsts & GINTSTS_MODEMIS) + dwc2_handle_mode_mismatch_intr(hsotg); + if (gintsts & GINTSTS_OTGINT) + dwc2_handle_otg_intr(hsotg); + if (gintsts & GINTSTS_CONIDSTSCHNG) + dwc2_handle_conn_id_status_change_intr(hsotg); + if (gintsts & GINTSTS_DISCONNINT) + dwc2_handle_disconnect_intr(hsotg); + if (gintsts & GINTSTS_SESSREQINT) + dwc2_handle_session_req_intr(hsotg); + if (gintsts & GINTSTS_WKUPINT) + dwc2_handle_wakeup_detected_intr(hsotg); + if (gintsts & GINTSTS_USBSUSP) + dwc2_handle_usb_suspend_intr(hsotg); + if (gintsts & GINTSTS_LPMTRANRCVD) + dwc2_handle_lpm_intr(hsotg); + + if (gintsts & GINTSTS_PRTINT) { + /* + * The port interrupt occurs while in device mode with HPRT0 + * Port Enable/Disable + */ + if (dwc2_is_device_mode(hsotg)) { + dev_dbg(hsotg->dev, + " --Port interrupt received in Device mode--\n"); + dwc2_handle_usb_port_intr(hsotg); + retval = IRQ_HANDLED; + } + } + +out: + spin_unlock(&hsotg->lock); + return retval; +} diff --git a/drivers/usb/dwc2/debug.h b/drivers/usb/dwc2/debug.h new file mode 100644 index 0000000000..47252c56d4 --- /dev/null +++ b/drivers/usb/dwc2/debug.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * debug.h - Designware USB2 DRD controller debug header + * + * Copyright (C) 2015 Intel Corporation + * Mian Yousaf Kaukab <yousaf.kaukab@intel.com> + */ + +#include "core.h" + +#ifdef CONFIG_DEBUG_FS +int dwc2_debugfs_init(struct dwc2_hsotg *hsotg); +void dwc2_debugfs_exit(struct dwc2_hsotg *hsotg); +#else +static inline int dwc2_debugfs_init(struct dwc2_hsotg *hsotg) +{ return 0; } +static inline void dwc2_debugfs_exit(struct dwc2_hsotg *hsotg) +{ } +#endif diff --git a/drivers/usb/dwc2/debugfs.c b/drivers/usb/dwc2/debugfs.c new file mode 100644 index 0000000000..1d72ece9cf --- /dev/null +++ b/drivers/usb/dwc2/debugfs.c @@ -0,0 +1,811 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * debugfs.c - Designware USB2 DRD controller debugfs + * + * Copyright (C) 2015 Intel Corporation + * Mian Yousaf Kaukab <yousaf.kaukab@intel.com> + */ + +#include <linux/spinlock.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/uaccess.h> + +#include "core.h" +#include "debug.h" + +#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \ + IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) + +/** + * testmode_write() - change usb test mode state. + * @file: The file to write to. + * @ubuf: The buffer where user wrote. + * @count: The ubuf size. + * @ppos: Unused parameter. + */ +static ssize_t testmode_write(struct file *file, const char __user *ubuf, size_t + count, loff_t *ppos) +{ + struct seq_file *s = file->private_data; + struct dwc2_hsotg *hsotg = s->private; + unsigned long flags; + u32 testmode = 0; + char buf[32]; + + if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) + return -EFAULT; + + if (!strncmp(buf, "test_j", 6)) + testmode = USB_TEST_J; + else if (!strncmp(buf, "test_k", 6)) + testmode = USB_TEST_K; + else if (!strncmp(buf, "test_se0_nak", 12)) + testmode = USB_TEST_SE0_NAK; + else if (!strncmp(buf, "test_packet", 11)) + testmode = USB_TEST_PACKET; + else if (!strncmp(buf, "test_force_enable", 17)) + testmode = USB_TEST_FORCE_ENABLE; + else + testmode = 0; + + spin_lock_irqsave(&hsotg->lock, flags); + dwc2_hsotg_set_test_mode(hsotg, testmode); + spin_unlock_irqrestore(&hsotg->lock, flags); + return count; +} + +/** + * testmode_show() - debugfs: show usb test mode state + * @s: The seq file to write to. + * @unused: Unused parameter. + * + * This debugfs entry shows which usb test mode is currently enabled. + */ +static int testmode_show(struct seq_file *s, void *unused) +{ + struct dwc2_hsotg *hsotg = s->private; + unsigned long flags; + int dctl; + + spin_lock_irqsave(&hsotg->lock, flags); + dctl = dwc2_readl(hsotg, DCTL); + dctl &= DCTL_TSTCTL_MASK; + dctl >>= DCTL_TSTCTL_SHIFT; + spin_unlock_irqrestore(&hsotg->lock, flags); + + switch (dctl) { + case 0: + seq_puts(s, "no test\n"); + break; + case USB_TEST_J: + seq_puts(s, "test_j\n"); + break; + case USB_TEST_K: + seq_puts(s, "test_k\n"); + break; + case USB_TEST_SE0_NAK: + seq_puts(s, "test_se0_nak\n"); + break; + case USB_TEST_PACKET: + seq_puts(s, "test_packet\n"); + break; + case USB_TEST_FORCE_ENABLE: + seq_puts(s, "test_force_enable\n"); + break; + default: + seq_printf(s, "UNKNOWN %d\n", dctl); + } + + return 0; +} + +static int testmode_open(struct inode *inode, struct file *file) +{ + return single_open(file, testmode_show, inode->i_private); +} + +static const struct file_operations testmode_fops = { + .owner = THIS_MODULE, + .open = testmode_open, + .write = testmode_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +/** + * state_show - debugfs: show overall driver and device state. + * @seq: The seq file to write to. + * @v: Unused parameter. + * + * This debugfs entry shows the overall state of the hardware and + * some general information about each of the endpoints available + * to the system. + */ +static int state_show(struct seq_file *seq, void *v) +{ + struct dwc2_hsotg *hsotg = seq->private; + int idx; + + seq_printf(seq, "DCFG=0x%08x, DCTL=0x%08x, DSTS=0x%08x\n", + dwc2_readl(hsotg, DCFG), + dwc2_readl(hsotg, DCTL), + dwc2_readl(hsotg, DSTS)); + + seq_printf(seq, "DIEPMSK=0x%08x, DOEPMASK=0x%08x\n", + dwc2_readl(hsotg, DIEPMSK), dwc2_readl(hsotg, DOEPMSK)); + + seq_printf(seq, "GINTMSK=0x%08x, GINTSTS=0x%08x\n", + dwc2_readl(hsotg, GINTMSK), + dwc2_readl(hsotg, GINTSTS)); + + seq_printf(seq, "DAINTMSK=0x%08x, DAINT=0x%08x\n", + dwc2_readl(hsotg, DAINTMSK), + dwc2_readl(hsotg, DAINT)); + + seq_printf(seq, "GNPTXSTS=0x%08x, GRXSTSR=%08x\n", + dwc2_readl(hsotg, GNPTXSTS), + dwc2_readl(hsotg, GRXSTSR)); + + seq_puts(seq, "\nEndpoint status:\n"); + + for (idx = 0; idx < hsotg->num_of_eps; idx++) { + u32 in, out; + + in = dwc2_readl(hsotg, DIEPCTL(idx)); + out = dwc2_readl(hsotg, DOEPCTL(idx)); + + seq_printf(seq, "ep%d: DIEPCTL=0x%08x, DOEPCTL=0x%08x", + idx, in, out); + + in = dwc2_readl(hsotg, DIEPTSIZ(idx)); + out = dwc2_readl(hsotg, DOEPTSIZ(idx)); + + seq_printf(seq, ", DIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x", + in, out); + + seq_puts(seq, "\n"); + } + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(state); + +/** + * fifo_show - debugfs: show the fifo information + * @seq: The seq_file to write data to. + * @v: Unused parameter. + * + * Show the FIFO information for the overall fifo and all the + * periodic transmission FIFOs. + */ +static int fifo_show(struct seq_file *seq, void *v) +{ + struct dwc2_hsotg *hsotg = seq->private; + int fifo_count = dwc2_hsotg_tx_fifo_count(hsotg); + u32 val; + int idx; + + seq_puts(seq, "Non-periodic FIFOs:\n"); + seq_printf(seq, "RXFIFO: Size %d\n", dwc2_readl(hsotg, GRXFSIZ)); + + val = dwc2_readl(hsotg, GNPTXFSIZ); + seq_printf(seq, "NPTXFIFO: Size %d, Start 0x%08x\n", + val >> FIFOSIZE_DEPTH_SHIFT, + val & FIFOSIZE_STARTADDR_MASK); + + seq_puts(seq, "\nPeriodic TXFIFOs:\n"); + + for (idx = 1; idx <= fifo_count; idx++) { + val = dwc2_readl(hsotg, DPTXFSIZN(idx)); + + seq_printf(seq, "\tDPTXFIFO%2d: Size %d, Start 0x%08x\n", idx, + val >> FIFOSIZE_DEPTH_SHIFT, + val & FIFOSIZE_STARTADDR_MASK); + } + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(fifo); + +static const char *decode_direction(int is_in) +{ + return is_in ? "in" : "out"; +} + +/** + * ep_show - debugfs: show the state of an endpoint. + * @seq: The seq_file to write data to. + * @v: Unused parameter. + * + * This debugfs entry shows the state of the given endpoint (one is + * registered for each available). + */ +static int ep_show(struct seq_file *seq, void *v) +{ + struct dwc2_hsotg_ep *ep = seq->private; + struct dwc2_hsotg *hsotg = ep->parent; + struct dwc2_hsotg_req *req; + int index = ep->index; + int show_limit = 15; + unsigned long flags; + + seq_printf(seq, "Endpoint index %d, named %s, dir %s:\n", + ep->index, ep->ep.name, decode_direction(ep->dir_in)); + + /* first show the register state */ + + seq_printf(seq, "\tDIEPCTL=0x%08x, DOEPCTL=0x%08x\n", + dwc2_readl(hsotg, DIEPCTL(index)), + dwc2_readl(hsotg, DOEPCTL(index))); + + seq_printf(seq, "\tDIEPDMA=0x%08x, DOEPDMA=0x%08x\n", + dwc2_readl(hsotg, DIEPDMA(index)), + dwc2_readl(hsotg, DOEPDMA(index))); + + seq_printf(seq, "\tDIEPINT=0x%08x, DOEPINT=0x%08x\n", + dwc2_readl(hsotg, DIEPINT(index)), + dwc2_readl(hsotg, DOEPINT(index))); + + seq_printf(seq, "\tDIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x\n", + dwc2_readl(hsotg, DIEPTSIZ(index)), + dwc2_readl(hsotg, DOEPTSIZ(index))); + + seq_puts(seq, "\n"); + seq_printf(seq, "mps %d\n", ep->ep.maxpacket); + seq_printf(seq, "total_data=%ld\n", ep->total_data); + + seq_printf(seq, "request list (%p,%p):\n", + ep->queue.next, ep->queue.prev); + + spin_lock_irqsave(&hsotg->lock, flags); + + list_for_each_entry(req, &ep->queue, queue) { + if (--show_limit < 0) { + seq_puts(seq, "not showing more requests...\n"); + break; + } + + seq_printf(seq, "%c req %p: %d bytes @%p, ", + req == ep->req ? '*' : ' ', + req, req->req.length, req->req.buf); + seq_printf(seq, "%d done, res %d\n", + req->req.actual, req->req.status); + } + + spin_unlock_irqrestore(&hsotg->lock, flags); + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(ep); + +/** + * dwc2_hsotg_create_debug - create debugfs directory and files + * @hsotg: The driver state + * + * Create the debugfs files to allow the user to get information + * about the state of the system. The directory name is created + * with the same name as the device itself, in case we end up + * with multiple blocks in future systems. + */ +static void dwc2_hsotg_create_debug(struct dwc2_hsotg *hsotg) +{ + struct dentry *root; + unsigned int epidx; + + root = hsotg->debug_root; + + /* create general state file */ + debugfs_create_file("state", 0444, root, hsotg, &state_fops); + debugfs_create_file("testmode", 0644, root, hsotg, &testmode_fops); + debugfs_create_file("fifo", 0444, root, hsotg, &fifo_fops); + + /* Create one file for each out endpoint */ + for (epidx = 0; epidx < hsotg->num_of_eps; epidx++) { + struct dwc2_hsotg_ep *ep; + + ep = hsotg->eps_out[epidx]; + if (ep) + debugfs_create_file(ep->name, 0444, root, ep, &ep_fops); + } + /* Create one file for each in endpoint. EP0 is handled with out eps */ + for (epidx = 1; epidx < hsotg->num_of_eps; epidx++) { + struct dwc2_hsotg_ep *ep; + + ep = hsotg->eps_in[epidx]; + if (ep) + debugfs_create_file(ep->name, 0444, root, ep, &ep_fops); + } +} +#else +static inline void dwc2_hsotg_create_debug(struct dwc2_hsotg *hsotg) {} +#endif + +/* dwc2_hsotg_delete_debug is removed as cleanup in done in dwc2_debugfs_exit */ + +#define dump_register(nm) \ +{ \ + .name = #nm, \ + .offset = nm, \ +} + +static const struct debugfs_reg32 dwc2_regs[] = { + /* + * Accessing registers like this can trigger mode mismatch interrupt. + * However, according to dwc2 databook, the register access, in this + * case, is completed on the processor bus but is ignored by the core + * and does not affect its operation. + */ + dump_register(GOTGCTL), + dump_register(GOTGINT), + dump_register(GAHBCFG), + dump_register(GUSBCFG), + dump_register(GRSTCTL), + dump_register(GINTSTS), + dump_register(GINTMSK), + dump_register(GRXSTSR), + /* Omit GRXSTSP */ + dump_register(GRXFSIZ), + dump_register(GNPTXFSIZ), + dump_register(GNPTXSTS), + dump_register(GI2CCTL), + dump_register(GPVNDCTL), + dump_register(GGPIO), + dump_register(GUID), + dump_register(GSNPSID), + dump_register(GHWCFG1), + dump_register(GHWCFG2), + dump_register(GHWCFG3), + dump_register(GHWCFG4), + dump_register(GLPMCFG), + dump_register(GPWRDN), + dump_register(GDFIFOCFG), + dump_register(ADPCTL), + dump_register(HPTXFSIZ), + dump_register(DPTXFSIZN(1)), + dump_register(DPTXFSIZN(2)), + dump_register(DPTXFSIZN(3)), + dump_register(DPTXFSIZN(4)), + dump_register(DPTXFSIZN(5)), + dump_register(DPTXFSIZN(6)), + dump_register(DPTXFSIZN(7)), + dump_register(DPTXFSIZN(8)), + dump_register(DPTXFSIZN(9)), + dump_register(DPTXFSIZN(10)), + dump_register(DPTXFSIZN(11)), + dump_register(DPTXFSIZN(12)), + dump_register(DPTXFSIZN(13)), + dump_register(DPTXFSIZN(14)), + dump_register(DPTXFSIZN(15)), + dump_register(DCFG), + dump_register(DCTL), + dump_register(DSTS), + dump_register(DIEPMSK), + dump_register(DOEPMSK), + dump_register(DAINT), + dump_register(DAINTMSK), + dump_register(DTKNQR1), + dump_register(DTKNQR2), + dump_register(DTKNQR3), + dump_register(DTKNQR4), + dump_register(DVBUSDIS), + dump_register(DVBUSPULSE), + dump_register(DIEPCTL(0)), + dump_register(DIEPCTL(1)), + dump_register(DIEPCTL(2)), + dump_register(DIEPCTL(3)), + dump_register(DIEPCTL(4)), + dump_register(DIEPCTL(5)), + dump_register(DIEPCTL(6)), + dump_register(DIEPCTL(7)), + dump_register(DIEPCTL(8)), + dump_register(DIEPCTL(9)), + dump_register(DIEPCTL(10)), + dump_register(DIEPCTL(11)), + dump_register(DIEPCTL(12)), + dump_register(DIEPCTL(13)), + dump_register(DIEPCTL(14)), + dump_register(DIEPCTL(15)), + dump_register(DOEPCTL(0)), + dump_register(DOEPCTL(1)), + dump_register(DOEPCTL(2)), + dump_register(DOEPCTL(3)), + dump_register(DOEPCTL(4)), + dump_register(DOEPCTL(5)), + dump_register(DOEPCTL(6)), + dump_register(DOEPCTL(7)), + dump_register(DOEPCTL(8)), + dump_register(DOEPCTL(9)), + dump_register(DOEPCTL(10)), + dump_register(DOEPCTL(11)), + dump_register(DOEPCTL(12)), + dump_register(DOEPCTL(13)), + dump_register(DOEPCTL(14)), + dump_register(DOEPCTL(15)), + dump_register(DIEPINT(0)), + dump_register(DIEPINT(1)), + dump_register(DIEPINT(2)), + dump_register(DIEPINT(3)), + dump_register(DIEPINT(4)), + dump_register(DIEPINT(5)), + dump_register(DIEPINT(6)), + dump_register(DIEPINT(7)), + dump_register(DIEPINT(8)), + dump_register(DIEPINT(9)), + dump_register(DIEPINT(10)), + dump_register(DIEPINT(11)), + dump_register(DIEPINT(12)), + dump_register(DIEPINT(13)), + dump_register(DIEPINT(14)), + dump_register(DIEPINT(15)), + dump_register(DOEPINT(0)), + dump_register(DOEPINT(1)), + dump_register(DOEPINT(2)), + dump_register(DOEPINT(3)), + dump_register(DOEPINT(4)), + dump_register(DOEPINT(5)), + dump_register(DOEPINT(6)), + dump_register(DOEPINT(7)), + dump_register(DOEPINT(8)), + dump_register(DOEPINT(9)), + dump_register(DOEPINT(10)), + dump_register(DOEPINT(11)), + dump_register(DOEPINT(12)), + dump_register(DOEPINT(13)), + dump_register(DOEPINT(14)), + dump_register(DOEPINT(15)), + dump_register(DIEPTSIZ(0)), + dump_register(DIEPTSIZ(1)), + dump_register(DIEPTSIZ(2)), + dump_register(DIEPTSIZ(3)), + dump_register(DIEPTSIZ(4)), + dump_register(DIEPTSIZ(5)), + dump_register(DIEPTSIZ(6)), + dump_register(DIEPTSIZ(7)), + dump_register(DIEPTSIZ(8)), + dump_register(DIEPTSIZ(9)), + dump_register(DIEPTSIZ(10)), + dump_register(DIEPTSIZ(11)), + dump_register(DIEPTSIZ(12)), + dump_register(DIEPTSIZ(13)), + dump_register(DIEPTSIZ(14)), + dump_register(DIEPTSIZ(15)), + dump_register(DOEPTSIZ(0)), + dump_register(DOEPTSIZ(1)), + dump_register(DOEPTSIZ(2)), + dump_register(DOEPTSIZ(3)), + dump_register(DOEPTSIZ(4)), + dump_register(DOEPTSIZ(5)), + dump_register(DOEPTSIZ(6)), + dump_register(DOEPTSIZ(7)), + dump_register(DOEPTSIZ(8)), + dump_register(DOEPTSIZ(9)), + dump_register(DOEPTSIZ(10)), + dump_register(DOEPTSIZ(11)), + dump_register(DOEPTSIZ(12)), + dump_register(DOEPTSIZ(13)), + dump_register(DOEPTSIZ(14)), + dump_register(DOEPTSIZ(15)), + dump_register(DIEPDMA(0)), + dump_register(DIEPDMA(1)), + dump_register(DIEPDMA(2)), + dump_register(DIEPDMA(3)), + dump_register(DIEPDMA(4)), + dump_register(DIEPDMA(5)), + dump_register(DIEPDMA(6)), + dump_register(DIEPDMA(7)), + dump_register(DIEPDMA(8)), + dump_register(DIEPDMA(9)), + dump_register(DIEPDMA(10)), + dump_register(DIEPDMA(11)), + dump_register(DIEPDMA(12)), + dump_register(DIEPDMA(13)), + dump_register(DIEPDMA(14)), + dump_register(DIEPDMA(15)), + dump_register(DOEPDMA(0)), + dump_register(DOEPDMA(1)), + dump_register(DOEPDMA(2)), + dump_register(DOEPDMA(3)), + dump_register(DOEPDMA(4)), + dump_register(DOEPDMA(5)), + dump_register(DOEPDMA(6)), + dump_register(DOEPDMA(7)), + dump_register(DOEPDMA(8)), + dump_register(DOEPDMA(9)), + dump_register(DOEPDMA(10)), + dump_register(DOEPDMA(11)), + dump_register(DOEPDMA(12)), + dump_register(DOEPDMA(13)), + dump_register(DOEPDMA(14)), + dump_register(DOEPDMA(15)), + dump_register(DTXFSTS(0)), + dump_register(DTXFSTS(1)), + dump_register(DTXFSTS(2)), + dump_register(DTXFSTS(3)), + dump_register(DTXFSTS(4)), + dump_register(DTXFSTS(5)), + dump_register(DTXFSTS(6)), + dump_register(DTXFSTS(7)), + dump_register(DTXFSTS(8)), + dump_register(DTXFSTS(9)), + dump_register(DTXFSTS(10)), + dump_register(DTXFSTS(11)), + dump_register(DTXFSTS(12)), + dump_register(DTXFSTS(13)), + dump_register(DTXFSTS(14)), + dump_register(DTXFSTS(15)), + dump_register(PCGCTL), + dump_register(HCFG), + dump_register(HFIR), + dump_register(HFNUM), + dump_register(HPTXSTS), + dump_register(HAINT), + dump_register(HAINTMSK), + dump_register(HFLBADDR), + dump_register(HPRT0), + dump_register(HCCHAR(0)), + dump_register(HCCHAR(1)), + dump_register(HCCHAR(2)), + dump_register(HCCHAR(3)), + dump_register(HCCHAR(4)), + dump_register(HCCHAR(5)), + dump_register(HCCHAR(6)), + dump_register(HCCHAR(7)), + dump_register(HCCHAR(8)), + dump_register(HCCHAR(9)), + dump_register(HCCHAR(10)), + dump_register(HCCHAR(11)), + dump_register(HCCHAR(12)), + dump_register(HCCHAR(13)), + dump_register(HCCHAR(14)), + dump_register(HCCHAR(15)), + dump_register(HCSPLT(0)), + dump_register(HCSPLT(1)), + dump_register(HCSPLT(2)), + dump_register(HCSPLT(3)), + dump_register(HCSPLT(4)), + dump_register(HCSPLT(5)), + dump_register(HCSPLT(6)), + dump_register(HCSPLT(7)), + dump_register(HCSPLT(8)), + dump_register(HCSPLT(9)), + dump_register(HCSPLT(10)), + dump_register(HCSPLT(11)), + dump_register(HCSPLT(12)), + dump_register(HCSPLT(13)), + dump_register(HCSPLT(14)), + dump_register(HCSPLT(15)), + dump_register(HCINT(0)), + dump_register(HCINT(1)), + dump_register(HCINT(2)), + dump_register(HCINT(3)), + dump_register(HCINT(4)), + dump_register(HCINT(5)), + dump_register(HCINT(6)), + dump_register(HCINT(7)), + dump_register(HCINT(8)), + dump_register(HCINT(9)), + dump_register(HCINT(10)), + dump_register(HCINT(11)), + dump_register(HCINT(12)), + dump_register(HCINT(13)), + dump_register(HCINT(14)), + dump_register(HCINT(15)), + dump_register(HCINTMSK(0)), + dump_register(HCINTMSK(1)), + dump_register(HCINTMSK(2)), + dump_register(HCINTMSK(3)), + dump_register(HCINTMSK(4)), + dump_register(HCINTMSK(5)), + dump_register(HCINTMSK(6)), + dump_register(HCINTMSK(7)), + dump_register(HCINTMSK(8)), + dump_register(HCINTMSK(9)), + dump_register(HCINTMSK(10)), + dump_register(HCINTMSK(11)), + dump_register(HCINTMSK(12)), + dump_register(HCINTMSK(13)), + dump_register(HCINTMSK(14)), + dump_register(HCINTMSK(15)), + dump_register(HCTSIZ(0)), + dump_register(HCTSIZ(1)), + dump_register(HCTSIZ(2)), + dump_register(HCTSIZ(3)), + dump_register(HCTSIZ(4)), + dump_register(HCTSIZ(5)), + dump_register(HCTSIZ(6)), + dump_register(HCTSIZ(7)), + dump_register(HCTSIZ(8)), + dump_register(HCTSIZ(9)), + dump_register(HCTSIZ(10)), + dump_register(HCTSIZ(11)), + dump_register(HCTSIZ(12)), + dump_register(HCTSIZ(13)), + dump_register(HCTSIZ(14)), + dump_register(HCTSIZ(15)), + dump_register(HCDMA(0)), + dump_register(HCDMA(1)), + dump_register(HCDMA(2)), + dump_register(HCDMA(3)), + dump_register(HCDMA(4)), + dump_register(HCDMA(5)), + dump_register(HCDMA(6)), + dump_register(HCDMA(7)), + dump_register(HCDMA(8)), + dump_register(HCDMA(9)), + dump_register(HCDMA(10)), + dump_register(HCDMA(11)), + dump_register(HCDMA(12)), + dump_register(HCDMA(13)), + dump_register(HCDMA(14)), + dump_register(HCDMA(15)), + dump_register(HCDMAB(0)), + dump_register(HCDMAB(1)), + dump_register(HCDMAB(2)), + dump_register(HCDMAB(3)), + dump_register(HCDMAB(4)), + dump_register(HCDMAB(5)), + dump_register(HCDMAB(6)), + dump_register(HCDMAB(7)), + dump_register(HCDMAB(8)), + dump_register(HCDMAB(9)), + dump_register(HCDMAB(10)), + dump_register(HCDMAB(11)), + dump_register(HCDMAB(12)), + dump_register(HCDMAB(13)), + dump_register(HCDMAB(14)), + dump_register(HCDMAB(15)), +}; + +#define print_param(_seq, _ptr, _param) \ +seq_printf((_seq), "%-30s: %d\n", #_param, (_ptr)->_param) + +#define print_param_hex(_seq, _ptr, _param) \ +seq_printf((_seq), "%-30s: 0x%x\n", #_param, (_ptr)->_param) + +static int params_show(struct seq_file *seq, void *v) +{ + struct dwc2_hsotg *hsotg = seq->private; + struct dwc2_core_params *p = &hsotg->params; + int i; + + print_param(seq, p, otg_caps.hnp_support); + print_param(seq, p, otg_caps.srp_support); + print_param(seq, p, otg_caps.otg_rev); + print_param(seq, p, dma_desc_enable); + print_param(seq, p, dma_desc_fs_enable); + print_param(seq, p, speed); + print_param(seq, p, enable_dynamic_fifo); + print_param(seq, p, en_multiple_tx_fifo); + print_param(seq, p, host_rx_fifo_size); + print_param(seq, p, host_nperio_tx_fifo_size); + print_param(seq, p, host_perio_tx_fifo_size); + print_param(seq, p, max_transfer_size); + print_param(seq, p, max_packet_count); + print_param(seq, p, host_channels); + print_param(seq, p, phy_type); + print_param(seq, p, phy_utmi_width); + print_param(seq, p, phy_ulpi_ddr); + print_param(seq, p, phy_ulpi_ext_vbus); + print_param(seq, p, i2c_enable); + print_param(seq, p, ipg_isoc_en); + print_param(seq, p, ulpi_fs_ls); + print_param(seq, p, host_support_fs_ls_low_power); + print_param(seq, p, host_ls_low_power_phy_clk); + print_param(seq, p, activate_stm_fs_transceiver); + print_param(seq, p, activate_stm_id_vb_detection); + print_param(seq, p, ts_dline); + print_param(seq, p, reload_ctl); + print_param_hex(seq, p, ahbcfg); + print_param(seq, p, uframe_sched); + print_param(seq, p, external_id_pin_ctl); + print_param(seq, p, power_down); + print_param(seq, p, lpm); + print_param(seq, p, lpm_clock_gating); + print_param(seq, p, besl); + print_param(seq, p, hird_threshold_en); + print_param(seq, p, hird_threshold); + print_param(seq, p, service_interval); + print_param(seq, p, host_dma); + print_param(seq, p, g_dma); + print_param(seq, p, g_dma_desc); + print_param(seq, p, g_rx_fifo_size); + print_param(seq, p, g_np_tx_fifo_size); + + for (i = 0; i < MAX_EPS_CHANNELS; i++) { + char str[32]; + + snprintf(str, 32, "g_tx_fifo_size[%d]", i); + seq_printf(seq, "%-30s: %d\n", str, p->g_tx_fifo_size[i]); + } + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(params); + +static int hw_params_show(struct seq_file *seq, void *v) +{ + struct dwc2_hsotg *hsotg = seq->private; + struct dwc2_hw_params *hw = &hsotg->hw_params; + + print_param(seq, hw, op_mode); + print_param(seq, hw, arch); + print_param(seq, hw, dma_desc_enable); + print_param(seq, hw, enable_dynamic_fifo); + print_param(seq, hw, en_multiple_tx_fifo); + print_param(seq, hw, rx_fifo_size); + print_param(seq, hw, host_nperio_tx_fifo_size); + print_param(seq, hw, dev_nperio_tx_fifo_size); + print_param(seq, hw, host_perio_tx_fifo_size); + print_param(seq, hw, nperio_tx_q_depth); + print_param(seq, hw, host_perio_tx_q_depth); + print_param(seq, hw, dev_token_q_depth); + print_param(seq, hw, max_transfer_size); + print_param(seq, hw, max_packet_count); + print_param(seq, hw, host_channels); + print_param(seq, hw, hs_phy_type); + print_param(seq, hw, fs_phy_type); + print_param(seq, hw, i2c_enable); + print_param(seq, hw, num_dev_ep); + print_param(seq, hw, num_dev_perio_in_ep); + print_param(seq, hw, total_fifo_size); + print_param(seq, hw, power_optimized); + print_param(seq, hw, utmi_phy_data_width); + print_param_hex(seq, hw, snpsid); + print_param_hex(seq, hw, dev_ep_dirs); + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(hw_params); + +static int dr_mode_show(struct seq_file *seq, void *v) +{ + struct dwc2_hsotg *hsotg = seq->private; + const char *dr_mode = ""; + + device_property_read_string(hsotg->dev, "dr_mode", &dr_mode); + seq_printf(seq, "%s\n", dr_mode); + return 0; +} +DEFINE_SHOW_ATTRIBUTE(dr_mode); + +int dwc2_debugfs_init(struct dwc2_hsotg *hsotg) +{ + int ret; + struct dentry *root; + + root = debugfs_create_dir(dev_name(hsotg->dev), usb_debug_root); + hsotg->debug_root = root; + + debugfs_create_file("params", 0444, root, hsotg, ¶ms_fops); + debugfs_create_file("hw_params", 0444, root, hsotg, &hw_params_fops); + debugfs_create_file("dr_mode", 0444, root, hsotg, &dr_mode_fops); + + /* Add gadget debugfs nodes */ + dwc2_hsotg_create_debug(hsotg); + + hsotg->regset = devm_kzalloc(hsotg->dev, sizeof(*hsotg->regset), + GFP_KERNEL); + if (!hsotg->regset) { + ret = -ENOMEM; + goto err; + } + + hsotg->regset->regs = dwc2_regs; + hsotg->regset->nregs = ARRAY_SIZE(dwc2_regs); + hsotg->regset->base = hsotg->regs; + + debugfs_create_regset32("regdump", 0444, root, hsotg->regset); + + return 0; +err: + debugfs_remove_recursive(hsotg->debug_root); + return ret; +} + +void dwc2_debugfs_exit(struct dwc2_hsotg *hsotg) +{ + debugfs_remove_recursive(hsotg->debug_root); + hsotg->debug_root = NULL; +} diff --git a/drivers/usb/dwc2/drd.c b/drivers/usb/dwc2/drd.c new file mode 100644 index 0000000000..a8605b0211 --- /dev/null +++ b/drivers/usb/dwc2/drd.c @@ -0,0 +1,250 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * drd.c - DesignWare USB2 DRD Controller Dual-role support + * + * Copyright (C) 2020 STMicroelectronics + * + * Author(s): Amelie Delaunay <amelie.delaunay@st.com> + */ + +#include <linux/clk.h> +#include <linux/iopoll.h> +#include <linux/platform_device.h> +#include <linux/usb/role.h> +#include "core.h" + +#define dwc2_ovr_gotgctl(gotgctl) \ + ((gotgctl) |= GOTGCTL_BVALOEN | GOTGCTL_AVALOEN | GOTGCTL_VBVALOEN | \ + GOTGCTL_DBNCE_FLTR_BYPASS) + +static void dwc2_ovr_init(struct dwc2_hsotg *hsotg) +{ + unsigned long flags; + u32 gotgctl; + + spin_lock_irqsave(&hsotg->lock, flags); + + gotgctl = dwc2_readl(hsotg, GOTGCTL); + dwc2_ovr_gotgctl(gotgctl); + gotgctl &= ~(GOTGCTL_BVALOVAL | GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL); + if (hsotg->role_sw_default_mode == USB_DR_MODE_HOST) + gotgctl |= GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL; + else if (hsotg->role_sw_default_mode == USB_DR_MODE_PERIPHERAL) + gotgctl |= GOTGCTL_BVALOVAL | GOTGCTL_VBVALOVAL; + dwc2_writel(hsotg, gotgctl, GOTGCTL); + + spin_unlock_irqrestore(&hsotg->lock, flags); + + dwc2_force_mode(hsotg, (hsotg->dr_mode == USB_DR_MODE_HOST) || + (hsotg->role_sw_default_mode == USB_DR_MODE_HOST)); +} + +static int dwc2_ovr_avalid(struct dwc2_hsotg *hsotg, bool valid) +{ + u32 gotgctl = dwc2_readl(hsotg, GOTGCTL); + + /* Check if A-Session is already in the right state */ + if ((valid && (gotgctl & GOTGCTL_ASESVLD)) || + (!valid && !(gotgctl & GOTGCTL_ASESVLD))) + return -EALREADY; + + /* Always enable overrides to handle the resume case */ + dwc2_ovr_gotgctl(gotgctl); + + gotgctl &= ~GOTGCTL_BVALOVAL; + if (valid) + gotgctl |= GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL; + else + gotgctl &= ~(GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL); + dwc2_writel(hsotg, gotgctl, GOTGCTL); + + return 0; +} + +static int dwc2_ovr_bvalid(struct dwc2_hsotg *hsotg, bool valid) +{ + u32 gotgctl = dwc2_readl(hsotg, GOTGCTL); + + /* Check if B-Session is already in the right state */ + if ((valid && (gotgctl & GOTGCTL_BSESVLD)) || + (!valid && !(gotgctl & GOTGCTL_BSESVLD))) + return -EALREADY; + + /* Always enable overrides to handle the resume case */ + dwc2_ovr_gotgctl(gotgctl); + + gotgctl &= ~GOTGCTL_AVALOVAL; + if (valid) + gotgctl |= GOTGCTL_BVALOVAL | GOTGCTL_VBVALOVAL; + else + gotgctl &= ~(GOTGCTL_BVALOVAL | GOTGCTL_VBVALOVAL); + dwc2_writel(hsotg, gotgctl, GOTGCTL); + + return 0; +} + +static int dwc2_drd_role_sw_set(struct usb_role_switch *sw, enum usb_role role) +{ + struct dwc2_hsotg *hsotg = usb_role_switch_get_drvdata(sw); + unsigned long flags; + int already = 0; + + /* Skip session not in line with dr_mode */ + if ((role == USB_ROLE_DEVICE && hsotg->dr_mode == USB_DR_MODE_HOST) || + (role == USB_ROLE_HOST && hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)) + return -EINVAL; + +#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \ + IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) + /* Skip session if core is in test mode */ + if (role == USB_ROLE_NONE && hsotg->test_mode) { + dev_dbg(hsotg->dev, "Core is in test mode\n"); + return -EBUSY; + } +#endif + + /* + * In case of USB_DR_MODE_PERIPHERAL, clock is disabled at the end of + * the probe and enabled on udc_start. + * If role-switch set is called before the udc_start, we need to enable + * the clock to read/write GOTGCTL and GUSBCFG registers to override + * mode and sessions. It is the case if cable is plugged at boot. + */ + if (!hsotg->ll_hw_enabled && hsotg->clk) { + int ret = clk_prepare_enable(hsotg->clk); + + if (ret) + return ret; + } + + spin_lock_irqsave(&hsotg->lock, flags); + + if (role == USB_ROLE_NONE) { + /* default operation mode when usb role is USB_ROLE_NONE */ + if (hsotg->role_sw_default_mode == USB_DR_MODE_HOST) + role = USB_ROLE_HOST; + else if (hsotg->role_sw_default_mode == USB_DR_MODE_PERIPHERAL) + role = USB_ROLE_DEVICE; + } + + if (role == USB_ROLE_HOST) { + already = dwc2_ovr_avalid(hsotg, true); + } else if (role == USB_ROLE_DEVICE) { + already = dwc2_ovr_bvalid(hsotg, true); + if (dwc2_is_device_enabled(hsotg)) { + /* This clear DCTL.SFTDISCON bit */ + dwc2_hsotg_core_connect(hsotg); + } + } else { + if (dwc2_is_device_mode(hsotg)) { + if (!dwc2_ovr_bvalid(hsotg, false)) + /* This set DCTL.SFTDISCON bit */ + dwc2_hsotg_core_disconnect(hsotg); + } else { + dwc2_ovr_avalid(hsotg, false); + } + } + + spin_unlock_irqrestore(&hsotg->lock, flags); + + if (!already && hsotg->dr_mode == USB_DR_MODE_OTG) + /* This will raise a Connector ID Status Change Interrupt */ + dwc2_force_mode(hsotg, role == USB_ROLE_HOST); + + if (!hsotg->ll_hw_enabled && hsotg->clk) + clk_disable_unprepare(hsotg->clk); + + dev_dbg(hsotg->dev, "%s-session valid\n", + role == USB_ROLE_NONE ? "No" : + role == USB_ROLE_HOST ? "A" : "B"); + + return 0; +} + +int dwc2_drd_init(struct dwc2_hsotg *hsotg) +{ + struct usb_role_switch_desc role_sw_desc = {0}; + struct usb_role_switch *role_sw; + int ret; + + if (!device_property_read_bool(hsotg->dev, "usb-role-switch")) + return 0; + + hsotg->role_sw_default_mode = usb_get_role_switch_default_mode(hsotg->dev); + role_sw_desc.driver_data = hsotg; + role_sw_desc.fwnode = dev_fwnode(hsotg->dev); + role_sw_desc.set = dwc2_drd_role_sw_set; + role_sw_desc.allow_userspace_control = true; + + role_sw = usb_role_switch_register(hsotg->dev, &role_sw_desc); + if (IS_ERR(role_sw)) { + ret = PTR_ERR(role_sw); + dev_err(hsotg->dev, + "failed to register role switch: %d\n", ret); + return ret; + } + + hsotg->role_sw = role_sw; + + /* Enable override and initialize values */ + dwc2_ovr_init(hsotg); + + return 0; +} + +void dwc2_drd_suspend(struct dwc2_hsotg *hsotg) +{ + u32 gintsts, gintmsk; + + if (hsotg->role_sw && !hsotg->params.external_id_pin_ctl) { + gintmsk = dwc2_readl(hsotg, GINTMSK); + gintmsk &= ~GINTSTS_CONIDSTSCHNG; + dwc2_writel(hsotg, gintmsk, GINTMSK); + gintsts = dwc2_readl(hsotg, GINTSTS); + dwc2_writel(hsotg, gintsts | GINTSTS_CONIDSTSCHNG, GINTSTS); + } +} + +void dwc2_drd_resume(struct dwc2_hsotg *hsotg) +{ + u32 gintsts, gintmsk; + enum usb_role role; + + if (hsotg->role_sw) { + /* get last known role (as the get ops isn't implemented by this driver) */ + role = usb_role_switch_get_role(hsotg->role_sw); + + if (role == USB_ROLE_NONE) { + if (hsotg->role_sw_default_mode == USB_DR_MODE_HOST) + role = USB_ROLE_HOST; + else if (hsotg->role_sw_default_mode == USB_DR_MODE_PERIPHERAL) + role = USB_ROLE_DEVICE; + } + + /* restore last role that may have been lost */ + if (role == USB_ROLE_HOST) + dwc2_ovr_avalid(hsotg, true); + else if (role == USB_ROLE_DEVICE) + dwc2_ovr_bvalid(hsotg, true); + + dwc2_force_mode(hsotg, role == USB_ROLE_HOST); + + dev_dbg(hsotg->dev, "resuming %s-session valid\n", + role == USB_ROLE_NONE ? "No" : + role == USB_ROLE_HOST ? "A" : "B"); + } + + if (hsotg->role_sw && !hsotg->params.external_id_pin_ctl) { + gintsts = dwc2_readl(hsotg, GINTSTS); + dwc2_writel(hsotg, gintsts | GINTSTS_CONIDSTSCHNG, GINTSTS); + gintmsk = dwc2_readl(hsotg, GINTMSK); + gintmsk |= GINTSTS_CONIDSTSCHNG; + dwc2_writel(hsotg, gintmsk, GINTMSK); + } +} + +void dwc2_drd_exit(struct dwc2_hsotg *hsotg) +{ + if (hsotg->role_sw) + usb_role_switch_unregister(hsotg->role_sw); +} diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c new file mode 100644 index 0000000000..b517a7216d --- /dev/null +++ b/drivers/usb/dwc2/gadget.c @@ -0,0 +1,5676 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C USB2.0 High-speed / OtG driver + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/mutex.h> +#include <linux/seq_file.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/slab.h> + +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/usb/phy.h> +#include <linux/usb/composite.h> + + +#include "core.h" +#include "hw.h" + +/* conversion functions */ +static inline struct dwc2_hsotg_req *our_req(struct usb_request *req) +{ + return container_of(req, struct dwc2_hsotg_req, req); +} + +static inline struct dwc2_hsotg_ep *our_ep(struct usb_ep *ep) +{ + return container_of(ep, struct dwc2_hsotg_ep, ep); +} + +static inline struct dwc2_hsotg *to_hsotg(struct usb_gadget *gadget) +{ + return container_of(gadget, struct dwc2_hsotg, gadget); +} + +static inline void dwc2_set_bit(struct dwc2_hsotg *hsotg, u32 offset, u32 val) +{ + dwc2_writel(hsotg, dwc2_readl(hsotg, offset) | val, offset); +} + +static inline void dwc2_clear_bit(struct dwc2_hsotg *hsotg, u32 offset, u32 val) +{ + dwc2_writel(hsotg, dwc2_readl(hsotg, offset) & ~val, offset); +} + +static inline struct dwc2_hsotg_ep *index_to_ep(struct dwc2_hsotg *hsotg, + u32 ep_index, u32 dir_in) +{ + if (dir_in) + return hsotg->eps_in[ep_index]; + else + return hsotg->eps_out[ep_index]; +} + +/* forward declaration of functions */ +static void dwc2_hsotg_dump(struct dwc2_hsotg *hsotg); + +/** + * using_dma - return the DMA status of the driver. + * @hsotg: The driver state. + * + * Return true if we're using DMA. + * + * Currently, we have the DMA support code worked into everywhere + * that needs it, but the AMBA DMA implementation in the hardware can + * only DMA from 32bit aligned addresses. This means that gadgets such + * as the CDC Ethernet cannot work as they often pass packets which are + * not 32bit aligned. + * + * Unfortunately the choice to use DMA or not is global to the controller + * and seems to be only settable when the controller is being put through + * a core reset. This means we either need to fix the gadgets to take + * account of DMA alignment, or add bounce buffers (yuerk). + * + * g_using_dma is set depending on dts flag. + */ +static inline bool using_dma(struct dwc2_hsotg *hsotg) +{ + return hsotg->params.g_dma; +} + +/* + * using_desc_dma - return the descriptor DMA status of the driver. + * @hsotg: The driver state. + * + * Return true if we're using descriptor DMA. + */ +static inline bool using_desc_dma(struct dwc2_hsotg *hsotg) +{ + return hsotg->params.g_dma_desc; +} + +/** + * dwc2_gadget_incr_frame_num - Increments the targeted frame number. + * @hs_ep: The endpoint + * + * This function will also check if the frame number overruns DSTS_SOFFN_LIMIT. + * If an overrun occurs it will wrap the value and set the frame_overrun flag. + */ +static inline void dwc2_gadget_incr_frame_num(struct dwc2_hsotg_ep *hs_ep) +{ + struct dwc2_hsotg *hsotg = hs_ep->parent; + u16 limit = DSTS_SOFFN_LIMIT; + + if (hsotg->gadget.speed != USB_SPEED_HIGH) + limit >>= 3; + + hs_ep->target_frame += hs_ep->interval; + if (hs_ep->target_frame > limit) { + hs_ep->frame_overrun = true; + hs_ep->target_frame &= limit; + } else { + hs_ep->frame_overrun = false; + } +} + +/** + * dwc2_gadget_dec_frame_num_by_one - Decrements the targeted frame number + * by one. + * @hs_ep: The endpoint. + * + * This function used in service interval based scheduling flow to calculate + * descriptor frame number filed value. For service interval mode frame + * number in descriptor should point to last (u)frame in the interval. + * + */ +static inline void dwc2_gadget_dec_frame_num_by_one(struct dwc2_hsotg_ep *hs_ep) +{ + struct dwc2_hsotg *hsotg = hs_ep->parent; + u16 limit = DSTS_SOFFN_LIMIT; + + if (hsotg->gadget.speed != USB_SPEED_HIGH) + limit >>= 3; + + if (hs_ep->target_frame) + hs_ep->target_frame -= 1; + else + hs_ep->target_frame = limit; +} + +/** + * dwc2_hsotg_en_gsint - enable one or more of the general interrupt + * @hsotg: The device state + * @ints: A bitmask of the interrupts to enable + */ +static void dwc2_hsotg_en_gsint(struct dwc2_hsotg *hsotg, u32 ints) +{ + u32 gsintmsk = dwc2_readl(hsotg, GINTMSK); + u32 new_gsintmsk; + + new_gsintmsk = gsintmsk | ints; + + if (new_gsintmsk != gsintmsk) { + dev_dbg(hsotg->dev, "gsintmsk now 0x%08x\n", new_gsintmsk); + dwc2_writel(hsotg, new_gsintmsk, GINTMSK); + } +} + +/** + * dwc2_hsotg_disable_gsint - disable one or more of the general interrupt + * @hsotg: The device state + * @ints: A bitmask of the interrupts to enable + */ +static void dwc2_hsotg_disable_gsint(struct dwc2_hsotg *hsotg, u32 ints) +{ + u32 gsintmsk = dwc2_readl(hsotg, GINTMSK); + u32 new_gsintmsk; + + new_gsintmsk = gsintmsk & ~ints; + + if (new_gsintmsk != gsintmsk) + dwc2_writel(hsotg, new_gsintmsk, GINTMSK); +} + +/** + * dwc2_hsotg_ctrl_epint - enable/disable an endpoint irq + * @hsotg: The device state + * @ep: The endpoint index + * @dir_in: True if direction is in. + * @en: The enable value, true to enable + * + * Set or clear the mask for an individual endpoint's interrupt + * request. + */ +static void dwc2_hsotg_ctrl_epint(struct dwc2_hsotg *hsotg, + unsigned int ep, unsigned int dir_in, + unsigned int en) +{ + unsigned long flags; + u32 bit = 1 << ep; + u32 daint; + + if (!dir_in) + bit <<= 16; + + local_irq_save(flags); + daint = dwc2_readl(hsotg, DAINTMSK); + if (en) + daint |= bit; + else + daint &= ~bit; + dwc2_writel(hsotg, daint, DAINTMSK); + local_irq_restore(flags); +} + +/** + * dwc2_hsotg_tx_fifo_count - return count of TX FIFOs in device mode + * + * @hsotg: Programming view of the DWC_otg controller + */ +int dwc2_hsotg_tx_fifo_count(struct dwc2_hsotg *hsotg) +{ + if (hsotg->hw_params.en_multiple_tx_fifo) + /* In dedicated FIFO mode we need count of IN EPs */ + return hsotg->hw_params.num_dev_in_eps; + else + /* In shared FIFO mode we need count of Periodic IN EPs */ + return hsotg->hw_params.num_dev_perio_in_ep; +} + +/** + * dwc2_hsotg_tx_fifo_total_depth - return total FIFO depth available for + * device mode TX FIFOs + * + * @hsotg: Programming view of the DWC_otg controller + */ +int dwc2_hsotg_tx_fifo_total_depth(struct dwc2_hsotg *hsotg) +{ + int addr; + int tx_addr_max; + u32 np_tx_fifo_size; + + np_tx_fifo_size = min_t(u32, hsotg->hw_params.dev_nperio_tx_fifo_size, + hsotg->params.g_np_tx_fifo_size); + + /* Get Endpoint Info Control block size in DWORDs. */ + tx_addr_max = hsotg->hw_params.total_fifo_size; + + addr = hsotg->params.g_rx_fifo_size + np_tx_fifo_size; + if (tx_addr_max <= addr) + return 0; + + return tx_addr_max - addr; +} + +/** + * dwc2_gadget_wkup_alert_handler - Handler for WKUP_ALERT interrupt + * + * @hsotg: Programming view of the DWC_otg controller + * + */ +static void dwc2_gadget_wkup_alert_handler(struct dwc2_hsotg *hsotg) +{ + u32 gintsts2; + u32 gintmsk2; + + gintsts2 = dwc2_readl(hsotg, GINTSTS2); + gintmsk2 = dwc2_readl(hsotg, GINTMSK2); + gintsts2 &= gintmsk2; + + if (gintsts2 & GINTSTS2_WKUP_ALERT_INT) { + dev_dbg(hsotg->dev, "%s: Wkup_Alert_Int\n", __func__); + dwc2_set_bit(hsotg, GINTSTS2, GINTSTS2_WKUP_ALERT_INT); + dwc2_set_bit(hsotg, DCTL, DCTL_RMTWKUPSIG); + } +} + +/** + * dwc2_hsotg_tx_fifo_average_depth - returns average depth of device mode + * TX FIFOs + * + * @hsotg: Programming view of the DWC_otg controller + */ +int dwc2_hsotg_tx_fifo_average_depth(struct dwc2_hsotg *hsotg) +{ + int tx_fifo_count; + int tx_fifo_depth; + + tx_fifo_depth = dwc2_hsotg_tx_fifo_total_depth(hsotg); + + tx_fifo_count = dwc2_hsotg_tx_fifo_count(hsotg); + + if (!tx_fifo_count) + return tx_fifo_depth; + else + return tx_fifo_depth / tx_fifo_count; +} + +/** + * dwc2_hsotg_init_fifo - initialise non-periodic FIFOs + * @hsotg: The device instance. + */ +static void dwc2_hsotg_init_fifo(struct dwc2_hsotg *hsotg) +{ + unsigned int ep; + unsigned int addr; + int timeout; + + u32 val; + u32 *txfsz = hsotg->params.g_tx_fifo_size; + + /* Reset fifo map if not correctly cleared during previous session */ + WARN_ON(hsotg->fifo_map); + hsotg->fifo_map = 0; + + /* set RX/NPTX FIFO sizes */ + dwc2_writel(hsotg, hsotg->params.g_rx_fifo_size, GRXFSIZ); + dwc2_writel(hsotg, (hsotg->params.g_rx_fifo_size << + FIFOSIZE_STARTADDR_SHIFT) | + (hsotg->params.g_np_tx_fifo_size << FIFOSIZE_DEPTH_SHIFT), + GNPTXFSIZ); + + /* + * arange all the rest of the TX FIFOs, as some versions of this + * block have overlapping default addresses. This also ensures + * that if the settings have been changed, then they are set to + * known values. + */ + + /* start at the end of the GNPTXFSIZ, rounded up */ + addr = hsotg->params.g_rx_fifo_size + hsotg->params.g_np_tx_fifo_size; + + /* + * Configure fifos sizes from provided configuration and assign + * them to endpoints dynamically according to maxpacket size value of + * given endpoint. + */ + for (ep = 1; ep < MAX_EPS_CHANNELS; ep++) { + if (!txfsz[ep]) + continue; + val = addr; + val |= txfsz[ep] << FIFOSIZE_DEPTH_SHIFT; + WARN_ONCE(addr + txfsz[ep] > hsotg->fifo_mem, + "insufficient fifo memory"); + addr += txfsz[ep]; + + dwc2_writel(hsotg, val, DPTXFSIZN(ep)); + val = dwc2_readl(hsotg, DPTXFSIZN(ep)); + } + + dwc2_writel(hsotg, hsotg->hw_params.total_fifo_size | + addr << GDFIFOCFG_EPINFOBASE_SHIFT, + GDFIFOCFG); + /* + * according to p428 of the design guide, we need to ensure that + * all fifos are flushed before continuing + */ + + dwc2_writel(hsotg, GRSTCTL_TXFNUM(0x10) | GRSTCTL_TXFFLSH | + GRSTCTL_RXFFLSH, GRSTCTL); + + /* wait until the fifos are both flushed */ + timeout = 100; + while (1) { + val = dwc2_readl(hsotg, GRSTCTL); + + if ((val & (GRSTCTL_TXFFLSH | GRSTCTL_RXFFLSH)) == 0) + break; + + if (--timeout == 0) { + dev_err(hsotg->dev, + "%s: timeout flushing fifos (GRSTCTL=%08x)\n", + __func__, val); + break; + } + + udelay(1); + } + + dev_dbg(hsotg->dev, "FIFOs reset, timeout at %d\n", timeout); +} + +/** + * dwc2_hsotg_ep_alloc_request - allocate USB rerequest structure + * @ep: USB endpoint to allocate request for. + * @flags: Allocation flags + * + * Allocate a new USB request structure appropriate for the specified endpoint + */ +static struct usb_request *dwc2_hsotg_ep_alloc_request(struct usb_ep *ep, + gfp_t flags) +{ + struct dwc2_hsotg_req *req; + + req = kzalloc(sizeof(*req), flags); + if (!req) + return NULL; + + INIT_LIST_HEAD(&req->queue); + + return &req->req; +} + +/** + * is_ep_periodic - return true if the endpoint is in periodic mode. + * @hs_ep: The endpoint to query. + * + * Returns true if the endpoint is in periodic mode, meaning it is being + * used for an Interrupt or ISO transfer. + */ +static inline int is_ep_periodic(struct dwc2_hsotg_ep *hs_ep) +{ + return hs_ep->periodic; +} + +/** + * dwc2_hsotg_unmap_dma - unmap the DMA memory being used for the request + * @hsotg: The device state. + * @hs_ep: The endpoint for the request + * @hs_req: The request being processed. + * + * This is the reverse of dwc2_hsotg_map_dma(), called for the completion + * of a request to ensure the buffer is ready for access by the caller. + */ +static void dwc2_hsotg_unmap_dma(struct dwc2_hsotg *hsotg, + struct dwc2_hsotg_ep *hs_ep, + struct dwc2_hsotg_req *hs_req) +{ + struct usb_request *req = &hs_req->req; + + usb_gadget_unmap_request(&hsotg->gadget, req, hs_ep->map_dir); +} + +/* + * dwc2_gadget_alloc_ctrl_desc_chains - allocate DMA descriptor chains + * for Control endpoint + * @hsotg: The device state. + * + * This function will allocate 4 descriptor chains for EP 0: 2 for + * Setup stage, per one for IN and OUT data/status transactions. + */ +static int dwc2_gadget_alloc_ctrl_desc_chains(struct dwc2_hsotg *hsotg) +{ + hsotg->setup_desc[0] = + dmam_alloc_coherent(hsotg->dev, + sizeof(struct dwc2_dma_desc), + &hsotg->setup_desc_dma[0], + GFP_KERNEL); + if (!hsotg->setup_desc[0]) + goto fail; + + hsotg->setup_desc[1] = + dmam_alloc_coherent(hsotg->dev, + sizeof(struct dwc2_dma_desc), + &hsotg->setup_desc_dma[1], + GFP_KERNEL); + if (!hsotg->setup_desc[1]) + goto fail; + + hsotg->ctrl_in_desc = + dmam_alloc_coherent(hsotg->dev, + sizeof(struct dwc2_dma_desc), + &hsotg->ctrl_in_desc_dma, + GFP_KERNEL); + if (!hsotg->ctrl_in_desc) + goto fail; + + hsotg->ctrl_out_desc = + dmam_alloc_coherent(hsotg->dev, + sizeof(struct dwc2_dma_desc), + &hsotg->ctrl_out_desc_dma, + GFP_KERNEL); + if (!hsotg->ctrl_out_desc) + goto fail; + + return 0; + +fail: + return -ENOMEM; +} + +/** + * dwc2_hsotg_write_fifo - write packet Data to the TxFIFO + * @hsotg: The controller state. + * @hs_ep: The endpoint we're going to write for. + * @hs_req: The request to write data for. + * + * This is called when the TxFIFO has some space in it to hold a new + * transmission and we have something to give it. The actual setup of + * the data size is done elsewhere, so all we have to do is to actually + * write the data. + * + * The return value is zero if there is more space (or nothing was done) + * otherwise -ENOSPC is returned if the FIFO space was used up. + * + * This routine is only needed for PIO + */ +static int dwc2_hsotg_write_fifo(struct dwc2_hsotg *hsotg, + struct dwc2_hsotg_ep *hs_ep, + struct dwc2_hsotg_req *hs_req) +{ + bool periodic = is_ep_periodic(hs_ep); + u32 gnptxsts = dwc2_readl(hsotg, GNPTXSTS); + int buf_pos = hs_req->req.actual; + int to_write = hs_ep->size_loaded; + void *data; + int can_write; + int pkt_round; + int max_transfer; + + to_write -= (buf_pos - hs_ep->last_load); + + /* if there's nothing to write, get out early */ + if (to_write == 0) + return 0; + + if (periodic && !hsotg->dedicated_fifos) { + u32 epsize = dwc2_readl(hsotg, DIEPTSIZ(hs_ep->index)); + int size_left; + int size_done; + + /* + * work out how much data was loaded so we can calculate + * how much data is left in the fifo. + */ + + size_left = DXEPTSIZ_XFERSIZE_GET(epsize); + + /* + * if shared fifo, we cannot write anything until the + * previous data has been completely sent. + */ + if (hs_ep->fifo_load != 0) { + dwc2_hsotg_en_gsint(hsotg, GINTSTS_PTXFEMP); + return -ENOSPC; + } + + dev_dbg(hsotg->dev, "%s: left=%d, load=%d, fifo=%d, size %d\n", + __func__, size_left, + hs_ep->size_loaded, hs_ep->fifo_load, hs_ep->fifo_size); + + /* how much of the data has moved */ + size_done = hs_ep->size_loaded - size_left; + + /* how much data is left in the fifo */ + can_write = hs_ep->fifo_load - size_done; + dev_dbg(hsotg->dev, "%s: => can_write1=%d\n", + __func__, can_write); + + can_write = hs_ep->fifo_size - can_write; + dev_dbg(hsotg->dev, "%s: => can_write2=%d\n", + __func__, can_write); + + if (can_write <= 0) { + dwc2_hsotg_en_gsint(hsotg, GINTSTS_PTXFEMP); + return -ENOSPC; + } + } else if (hsotg->dedicated_fifos && hs_ep->index != 0) { + can_write = dwc2_readl(hsotg, + DTXFSTS(hs_ep->fifo_index)); + + can_write &= 0xffff; + can_write *= 4; + } else { + if (GNPTXSTS_NP_TXQ_SPC_AVAIL_GET(gnptxsts) == 0) { + dev_dbg(hsotg->dev, + "%s: no queue slots available (0x%08x)\n", + __func__, gnptxsts); + + dwc2_hsotg_en_gsint(hsotg, GINTSTS_NPTXFEMP); + return -ENOSPC; + } + + can_write = GNPTXSTS_NP_TXF_SPC_AVAIL_GET(gnptxsts); + can_write *= 4; /* fifo size is in 32bit quantities. */ + } + + max_transfer = hs_ep->ep.maxpacket * hs_ep->mc; + + dev_dbg(hsotg->dev, "%s: GNPTXSTS=%08x, can=%d, to=%d, max_transfer %d\n", + __func__, gnptxsts, can_write, to_write, max_transfer); + + /* + * limit to 512 bytes of data, it seems at least on the non-periodic + * FIFO, requests of >512 cause the endpoint to get stuck with a + * fragment of the end of the transfer in it. + */ + if (can_write > 512 && !periodic) + can_write = 512; + + /* + * limit the write to one max-packet size worth of data, but allow + * the transfer to return that it did not run out of fifo space + * doing it. + */ + if (to_write > max_transfer) { + to_write = max_transfer; + + /* it's needed only when we do not use dedicated fifos */ + if (!hsotg->dedicated_fifos) + dwc2_hsotg_en_gsint(hsotg, + periodic ? GINTSTS_PTXFEMP : + GINTSTS_NPTXFEMP); + } + + /* see if we can write data */ + + if (to_write > can_write) { + to_write = can_write; + pkt_round = to_write % max_transfer; + + /* + * Round the write down to an + * exact number of packets. + * + * Note, we do not currently check to see if we can ever + * write a full packet or not to the FIFO. + */ + + if (pkt_round) + to_write -= pkt_round; + + /* + * enable correct FIFO interrupt to alert us when there + * is more room left. + */ + + /* it's needed only when we do not use dedicated fifos */ + if (!hsotg->dedicated_fifos) + dwc2_hsotg_en_gsint(hsotg, + periodic ? GINTSTS_PTXFEMP : + GINTSTS_NPTXFEMP); + } + + dev_dbg(hsotg->dev, "write %d/%d, can_write %d, done %d\n", + to_write, hs_req->req.length, can_write, buf_pos); + + if (to_write <= 0) + return -ENOSPC; + + hs_req->req.actual = buf_pos + to_write; + hs_ep->total_data += to_write; + + if (periodic) + hs_ep->fifo_load += to_write; + + to_write = DIV_ROUND_UP(to_write, 4); + data = hs_req->req.buf + buf_pos; + + dwc2_writel_rep(hsotg, EPFIFO(hs_ep->index), data, to_write); + + return (to_write >= can_write) ? -ENOSPC : 0; +} + +/** + * get_ep_limit - get the maximum data legnth for this endpoint + * @hs_ep: The endpoint + * + * Return the maximum data that can be queued in one go on a given endpoint + * so that transfers that are too long can be split. + */ +static unsigned int get_ep_limit(struct dwc2_hsotg_ep *hs_ep) +{ + int index = hs_ep->index; + unsigned int maxsize; + unsigned int maxpkt; + + if (index != 0) { + maxsize = DXEPTSIZ_XFERSIZE_LIMIT + 1; + maxpkt = DXEPTSIZ_PKTCNT_LIMIT + 1; + } else { + maxsize = 64 + 64; + if (hs_ep->dir_in) + maxpkt = DIEPTSIZ0_PKTCNT_LIMIT + 1; + else + maxpkt = 2; + } + + /* we made the constant loading easier above by using +1 */ + maxpkt--; + maxsize--; + + /* + * constrain by packet count if maxpkts*pktsize is greater + * than the length register size. + */ + + if ((maxpkt * hs_ep->ep.maxpacket) < maxsize) + maxsize = maxpkt * hs_ep->ep.maxpacket; + + return maxsize; +} + +/** + * dwc2_hsotg_read_frameno - read current frame number + * @hsotg: The device instance + * + * Return the current frame number + */ +static u32 dwc2_hsotg_read_frameno(struct dwc2_hsotg *hsotg) +{ + u32 dsts; + + dsts = dwc2_readl(hsotg, DSTS); + dsts &= DSTS_SOFFN_MASK; + dsts >>= DSTS_SOFFN_SHIFT; + + return dsts; +} + +/** + * dwc2_gadget_get_chain_limit - get the maximum data payload value of the + * DMA descriptor chain prepared for specific endpoint + * @hs_ep: The endpoint + * + * Return the maximum data that can be queued in one go on a given endpoint + * depending on its descriptor chain capacity so that transfers that + * are too long can be split. + */ +static unsigned int dwc2_gadget_get_chain_limit(struct dwc2_hsotg_ep *hs_ep) +{ + const struct usb_endpoint_descriptor *ep_desc = hs_ep->ep.desc; + int is_isoc = hs_ep->isochronous; + unsigned int maxsize; + u32 mps = hs_ep->ep.maxpacket; + int dir_in = hs_ep->dir_in; + + if (is_isoc) + maxsize = (hs_ep->dir_in ? DEV_DMA_ISOC_TX_NBYTES_LIMIT : + DEV_DMA_ISOC_RX_NBYTES_LIMIT) * + MAX_DMA_DESC_NUM_HS_ISOC; + else + maxsize = DEV_DMA_NBYTES_LIMIT * MAX_DMA_DESC_NUM_GENERIC; + + /* Interrupt OUT EP with mps not multiple of 4 */ + if (hs_ep->index) + if (usb_endpoint_xfer_int(ep_desc) && !dir_in && (mps % 4)) + maxsize = mps * MAX_DMA_DESC_NUM_GENERIC; + + return maxsize; +} + +/* + * dwc2_gadget_get_desc_params - get DMA descriptor parameters. + * @hs_ep: The endpoint + * @mask: RX/TX bytes mask to be defined + * + * Returns maximum data payload for one descriptor after analyzing endpoint + * characteristics. + * DMA descriptor transfer bytes limit depends on EP type: + * Control out - MPS, + * Isochronous - descriptor rx/tx bytes bitfield limit, + * Control In/Bulk/Interrupt - multiple of mps. This will allow to not + * have concatenations from various descriptors within one packet. + * Interrupt OUT - if mps not multiple of 4 then a single packet corresponds + * to a single descriptor. + * + * Selects corresponding mask for RX/TX bytes as well. + */ +static u32 dwc2_gadget_get_desc_params(struct dwc2_hsotg_ep *hs_ep, u32 *mask) +{ + const struct usb_endpoint_descriptor *ep_desc = hs_ep->ep.desc; + u32 mps = hs_ep->ep.maxpacket; + int dir_in = hs_ep->dir_in; + u32 desc_size = 0; + + if (!hs_ep->index && !dir_in) { + desc_size = mps; + *mask = DEV_DMA_NBYTES_MASK; + } else if (hs_ep->isochronous) { + if (dir_in) { + desc_size = DEV_DMA_ISOC_TX_NBYTES_LIMIT; + *mask = DEV_DMA_ISOC_TX_NBYTES_MASK; + } else { + desc_size = DEV_DMA_ISOC_RX_NBYTES_LIMIT; + *mask = DEV_DMA_ISOC_RX_NBYTES_MASK; + } + } else { + desc_size = DEV_DMA_NBYTES_LIMIT; + *mask = DEV_DMA_NBYTES_MASK; + + /* Round down desc_size to be mps multiple */ + desc_size -= desc_size % mps; + } + + /* Interrupt OUT EP with mps not multiple of 4 */ + if (hs_ep->index) + if (usb_endpoint_xfer_int(ep_desc) && !dir_in && (mps % 4)) { + desc_size = mps; + *mask = DEV_DMA_NBYTES_MASK; + } + + return desc_size; +} + +static void dwc2_gadget_fill_nonisoc_xfer_ddma_one(struct dwc2_hsotg_ep *hs_ep, + struct dwc2_dma_desc **desc, + dma_addr_t dma_buff, + unsigned int len, + bool true_last) +{ + int dir_in = hs_ep->dir_in; + u32 mps = hs_ep->ep.maxpacket; + u32 maxsize = 0; + u32 offset = 0; + u32 mask = 0; + int i; + + maxsize = dwc2_gadget_get_desc_params(hs_ep, &mask); + + hs_ep->desc_count = (len / maxsize) + + ((len % maxsize) ? 1 : 0); + if (len == 0) + hs_ep->desc_count = 1; + + for (i = 0; i < hs_ep->desc_count; ++i) { + (*desc)->status = 0; + (*desc)->status |= (DEV_DMA_BUFF_STS_HBUSY + << DEV_DMA_BUFF_STS_SHIFT); + + if (len > maxsize) { + if (!hs_ep->index && !dir_in) + (*desc)->status |= (DEV_DMA_L | DEV_DMA_IOC); + + (*desc)->status |= + maxsize << DEV_DMA_NBYTES_SHIFT & mask; + (*desc)->buf = dma_buff + offset; + + len -= maxsize; + offset += maxsize; + } else { + if (true_last) + (*desc)->status |= (DEV_DMA_L | DEV_DMA_IOC); + + if (dir_in) + (*desc)->status |= (len % mps) ? DEV_DMA_SHORT : + ((hs_ep->send_zlp && true_last) ? + DEV_DMA_SHORT : 0); + + (*desc)->status |= + len << DEV_DMA_NBYTES_SHIFT & mask; + (*desc)->buf = dma_buff + offset; + } + + (*desc)->status &= ~DEV_DMA_BUFF_STS_MASK; + (*desc)->status |= (DEV_DMA_BUFF_STS_HREADY + << DEV_DMA_BUFF_STS_SHIFT); + (*desc)++; + } +} + +/* + * dwc2_gadget_config_nonisoc_xfer_ddma - prepare non ISOC DMA desc chain. + * @hs_ep: The endpoint + * @ureq: Request to transfer + * @offset: offset in bytes + * @len: Length of the transfer + * + * This function will iterate over descriptor chain and fill its entries + * with corresponding information based on transfer data. + */ +static void dwc2_gadget_config_nonisoc_xfer_ddma(struct dwc2_hsotg_ep *hs_ep, + dma_addr_t dma_buff, + unsigned int len) +{ + struct usb_request *ureq = NULL; + struct dwc2_dma_desc *desc = hs_ep->desc_list; + struct scatterlist *sg; + int i; + u8 desc_count = 0; + + if (hs_ep->req) + ureq = &hs_ep->req->req; + + /* non-DMA sg buffer */ + if (!ureq || !ureq->num_sgs) { + dwc2_gadget_fill_nonisoc_xfer_ddma_one(hs_ep, &desc, + dma_buff, len, true); + return; + } + + /* DMA sg buffer */ + for_each_sg(ureq->sg, sg, ureq->num_sgs, i) { + dwc2_gadget_fill_nonisoc_xfer_ddma_one(hs_ep, &desc, + sg_dma_address(sg) + sg->offset, sg_dma_len(sg), + sg_is_last(sg)); + desc_count += hs_ep->desc_count; + } + + hs_ep->desc_count = desc_count; +} + +/* + * dwc2_gadget_fill_isoc_desc - fills next isochronous descriptor in chain. + * @hs_ep: The isochronous endpoint. + * @dma_buff: usb requests dma buffer. + * @len: usb request transfer length. + * + * Fills next free descriptor with the data of the arrived usb request, + * frame info, sets Last and IOC bits increments next_desc. If filled + * descriptor is not the first one, removes L bit from the previous descriptor + * status. + */ +static int dwc2_gadget_fill_isoc_desc(struct dwc2_hsotg_ep *hs_ep, + dma_addr_t dma_buff, unsigned int len) +{ + struct dwc2_dma_desc *desc; + struct dwc2_hsotg *hsotg = hs_ep->parent; + u32 index; + u32 mask = 0; + u8 pid = 0; + + dwc2_gadget_get_desc_params(hs_ep, &mask); + + index = hs_ep->next_desc; + desc = &hs_ep->desc_list[index]; + + /* Check if descriptor chain full */ + if ((desc->status >> DEV_DMA_BUFF_STS_SHIFT) == + DEV_DMA_BUFF_STS_HREADY) { + dev_dbg(hsotg->dev, "%s: desc chain full\n", __func__); + return 1; + } + + /* Clear L bit of previous desc if more than one entries in the chain */ + if (hs_ep->next_desc) + hs_ep->desc_list[index - 1].status &= ~DEV_DMA_L; + + dev_dbg(hsotg->dev, "%s: Filling ep %d, dir %s isoc desc # %d\n", + __func__, hs_ep->index, hs_ep->dir_in ? "in" : "out", index); + + desc->status = 0; + desc->status |= (DEV_DMA_BUFF_STS_HBUSY << DEV_DMA_BUFF_STS_SHIFT); + + desc->buf = dma_buff; + desc->status |= (DEV_DMA_L | DEV_DMA_IOC | + ((len << DEV_DMA_NBYTES_SHIFT) & mask)); + + if (hs_ep->dir_in) { + if (len) + pid = DIV_ROUND_UP(len, hs_ep->ep.maxpacket); + else + pid = 1; + desc->status |= ((pid << DEV_DMA_ISOC_PID_SHIFT) & + DEV_DMA_ISOC_PID_MASK) | + ((len % hs_ep->ep.maxpacket) ? + DEV_DMA_SHORT : 0) | + ((hs_ep->target_frame << + DEV_DMA_ISOC_FRNUM_SHIFT) & + DEV_DMA_ISOC_FRNUM_MASK); + } + + desc->status &= ~DEV_DMA_BUFF_STS_MASK; + desc->status |= (DEV_DMA_BUFF_STS_HREADY << DEV_DMA_BUFF_STS_SHIFT); + + /* Increment frame number by interval for IN */ + if (hs_ep->dir_in) + dwc2_gadget_incr_frame_num(hs_ep); + + /* Update index of last configured entry in the chain */ + hs_ep->next_desc++; + if (hs_ep->next_desc >= MAX_DMA_DESC_NUM_HS_ISOC) + hs_ep->next_desc = 0; + + return 0; +} + +/* + * dwc2_gadget_start_isoc_ddma - start isochronous transfer in DDMA + * @hs_ep: The isochronous endpoint. + * + * Prepare descriptor chain for isochronous endpoints. Afterwards + * write DMA address to HW and enable the endpoint. + */ +static void dwc2_gadget_start_isoc_ddma(struct dwc2_hsotg_ep *hs_ep) +{ + struct dwc2_hsotg *hsotg = hs_ep->parent; + struct dwc2_hsotg_req *hs_req, *treq; + int index = hs_ep->index; + int ret; + int i; + u32 dma_reg; + u32 depctl; + u32 ctrl; + struct dwc2_dma_desc *desc; + + if (list_empty(&hs_ep->queue)) { + hs_ep->target_frame = TARGET_FRAME_INITIAL; + dev_dbg(hsotg->dev, "%s: No requests in queue\n", __func__); + return; + } + + /* Initialize descriptor chain by Host Busy status */ + for (i = 0; i < MAX_DMA_DESC_NUM_HS_ISOC; i++) { + desc = &hs_ep->desc_list[i]; + desc->status = 0; + desc->status |= (DEV_DMA_BUFF_STS_HBUSY + << DEV_DMA_BUFF_STS_SHIFT); + } + + hs_ep->next_desc = 0; + list_for_each_entry_safe(hs_req, treq, &hs_ep->queue, queue) { + dma_addr_t dma_addr = hs_req->req.dma; + + if (hs_req->req.num_sgs) { + WARN_ON(hs_req->req.num_sgs > 1); + dma_addr = sg_dma_address(hs_req->req.sg); + } + ret = dwc2_gadget_fill_isoc_desc(hs_ep, dma_addr, + hs_req->req.length); + if (ret) + break; + } + + hs_ep->compl_desc = 0; + depctl = hs_ep->dir_in ? DIEPCTL(index) : DOEPCTL(index); + dma_reg = hs_ep->dir_in ? DIEPDMA(index) : DOEPDMA(index); + + /* write descriptor chain address to control register */ + dwc2_writel(hsotg, hs_ep->desc_list_dma, dma_reg); + + ctrl = dwc2_readl(hsotg, depctl); + ctrl |= DXEPCTL_EPENA | DXEPCTL_CNAK; + dwc2_writel(hsotg, ctrl, depctl); +} + +static bool dwc2_gadget_target_frame_elapsed(struct dwc2_hsotg_ep *hs_ep); +static void dwc2_hsotg_complete_request(struct dwc2_hsotg *hsotg, + struct dwc2_hsotg_ep *hs_ep, + struct dwc2_hsotg_req *hs_req, + int result); + +/** + * dwc2_hsotg_start_req - start a USB request from an endpoint's queue + * @hsotg: The controller state. + * @hs_ep: The endpoint to process a request for + * @hs_req: The request to start. + * @continuing: True if we are doing more for the current request. + * + * Start the given request running by setting the endpoint registers + * appropriately, and writing any data to the FIFOs. + */ +static void dwc2_hsotg_start_req(struct dwc2_hsotg *hsotg, + struct dwc2_hsotg_ep *hs_ep, + struct dwc2_hsotg_req *hs_req, + bool continuing) +{ + struct usb_request *ureq = &hs_req->req; + int index = hs_ep->index; + int dir_in = hs_ep->dir_in; + u32 epctrl_reg; + u32 epsize_reg; + u32 epsize; + u32 ctrl; + unsigned int length; + unsigned int packets; + unsigned int maxreq; + unsigned int dma_reg; + + if (index != 0) { + if (hs_ep->req && !continuing) { + dev_err(hsotg->dev, "%s: active request\n", __func__); + WARN_ON(1); + return; + } else if (hs_ep->req != hs_req && continuing) { + dev_err(hsotg->dev, + "%s: continue different req\n", __func__); + WARN_ON(1); + return; + } + } + + dma_reg = dir_in ? DIEPDMA(index) : DOEPDMA(index); + epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index); + epsize_reg = dir_in ? DIEPTSIZ(index) : DOEPTSIZ(index); + + dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x, ep %d, dir %s\n", + __func__, dwc2_readl(hsotg, epctrl_reg), index, + hs_ep->dir_in ? "in" : "out"); + + /* If endpoint is stalled, we will restart request later */ + ctrl = dwc2_readl(hsotg, epctrl_reg); + + if (index && ctrl & DXEPCTL_STALL) { + dev_warn(hsotg->dev, "%s: ep%d is stalled\n", __func__, index); + return; + } + + length = ureq->length - ureq->actual; + dev_dbg(hsotg->dev, "ureq->length:%d ureq->actual:%d\n", + ureq->length, ureq->actual); + + if (!using_desc_dma(hsotg)) + maxreq = get_ep_limit(hs_ep); + else + maxreq = dwc2_gadget_get_chain_limit(hs_ep); + + if (length > maxreq) { + int round = maxreq % hs_ep->ep.maxpacket; + + dev_dbg(hsotg->dev, "%s: length %d, max-req %d, r %d\n", + __func__, length, maxreq, round); + + /* round down to multiple of packets */ + if (round) + maxreq -= round; + + length = maxreq; + } + + if (length) + packets = DIV_ROUND_UP(length, hs_ep->ep.maxpacket); + else + packets = 1; /* send one packet if length is zero. */ + + if (dir_in && index != 0) + if (hs_ep->isochronous) + epsize = DXEPTSIZ_MC(packets); + else + epsize = DXEPTSIZ_MC(1); + else + epsize = 0; + + /* + * zero length packet should be programmed on its own and should not + * be counted in DIEPTSIZ.PktCnt with other packets. + */ + if (dir_in && ureq->zero && !continuing) { + /* Test if zlp is actually required. */ + if ((ureq->length >= hs_ep->ep.maxpacket) && + !(ureq->length % hs_ep->ep.maxpacket)) + hs_ep->send_zlp = 1; + } + + epsize |= DXEPTSIZ_PKTCNT(packets); + epsize |= DXEPTSIZ_XFERSIZE(length); + + dev_dbg(hsotg->dev, "%s: %d@%d/%d, 0x%08x => 0x%08x\n", + __func__, packets, length, ureq->length, epsize, epsize_reg); + + /* store the request as the current one we're doing */ + hs_ep->req = hs_req; + + if (using_desc_dma(hsotg)) { + u32 offset = 0; + u32 mps = hs_ep->ep.maxpacket; + + /* Adjust length: EP0 - MPS, other OUT EPs - multiple of MPS */ + if (!dir_in) { + if (!index) + length = mps; + else if (length % mps) + length += (mps - (length % mps)); + } + + if (continuing) + offset = ureq->actual; + + /* Fill DDMA chain entries */ + dwc2_gadget_config_nonisoc_xfer_ddma(hs_ep, ureq->dma + offset, + length); + + /* write descriptor chain address to control register */ + dwc2_writel(hsotg, hs_ep->desc_list_dma, dma_reg); + + dev_dbg(hsotg->dev, "%s: %08x pad => 0x%08x\n", + __func__, (u32)hs_ep->desc_list_dma, dma_reg); + } else { + /* write size / packets */ + dwc2_writel(hsotg, epsize, epsize_reg); + + if (using_dma(hsotg) && !continuing && (length != 0)) { + /* + * write DMA address to control register, buffer + * already synced by dwc2_hsotg_ep_queue(). + */ + + dwc2_writel(hsotg, ureq->dma, dma_reg); + + dev_dbg(hsotg->dev, "%s: %pad => 0x%08x\n", + __func__, &ureq->dma, dma_reg); + } + } + + if (hs_ep->isochronous) { + if (!dwc2_gadget_target_frame_elapsed(hs_ep)) { + if (hs_ep->interval == 1) { + if (hs_ep->target_frame & 0x1) + ctrl |= DXEPCTL_SETODDFR; + else + ctrl |= DXEPCTL_SETEVENFR; + } + ctrl |= DXEPCTL_CNAK; + } else { + hs_req->req.frame_number = hs_ep->target_frame; + hs_req->req.actual = 0; + dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, -ENODATA); + return; + } + } + + ctrl |= DXEPCTL_EPENA; /* ensure ep enabled */ + + dev_dbg(hsotg->dev, "ep0 state:%d\n", hsotg->ep0_state); + + /* For Setup request do not clear NAK */ + if (!(index == 0 && hsotg->ep0_state == DWC2_EP0_SETUP)) + ctrl |= DXEPCTL_CNAK; /* clear NAK set by core */ + + dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl); + dwc2_writel(hsotg, ctrl, epctrl_reg); + + /* + * set these, it seems that DMA support increments past the end + * of the packet buffer so we need to calculate the length from + * this information. + */ + hs_ep->size_loaded = length; + hs_ep->last_load = ureq->actual; + + if (dir_in && !using_dma(hsotg)) { + /* set these anyway, we may need them for non-periodic in */ + hs_ep->fifo_load = 0; + + dwc2_hsotg_write_fifo(hsotg, hs_ep, hs_req); + } + + /* + * Note, trying to clear the NAK here causes problems with transmit + * on the S3C6400 ending up with the TXFIFO becoming full. + */ + + /* check ep is enabled */ + if (!(dwc2_readl(hsotg, epctrl_reg) & DXEPCTL_EPENA)) + dev_dbg(hsotg->dev, + "ep%d: failed to become enabled (DXEPCTL=0x%08x)?\n", + index, dwc2_readl(hsotg, epctrl_reg)); + + dev_dbg(hsotg->dev, "%s: DXEPCTL=0x%08x\n", + __func__, dwc2_readl(hsotg, epctrl_reg)); + + /* enable ep interrupts */ + dwc2_hsotg_ctrl_epint(hsotg, hs_ep->index, hs_ep->dir_in, 1); +} + +/** + * dwc2_hsotg_map_dma - map the DMA memory being used for the request + * @hsotg: The device state. + * @hs_ep: The endpoint the request is on. + * @req: The request being processed. + * + * We've been asked to queue a request, so ensure that the memory buffer + * is correctly setup for DMA. If we've been passed an extant DMA address + * then ensure the buffer has been synced to memory. If our buffer has no + * DMA memory, then we map the memory and mark our request to allow us to + * cleanup on completion. + */ +static int dwc2_hsotg_map_dma(struct dwc2_hsotg *hsotg, + struct dwc2_hsotg_ep *hs_ep, + struct usb_request *req) +{ + int ret; + + hs_ep->map_dir = hs_ep->dir_in; + ret = usb_gadget_map_request(&hsotg->gadget, req, hs_ep->dir_in); + if (ret) + goto dma_error; + + return 0; + +dma_error: + dev_err(hsotg->dev, "%s: failed to map buffer %p, %d bytes\n", + __func__, req->buf, req->length); + + return -EIO; +} + +static int dwc2_hsotg_handle_unaligned_buf_start(struct dwc2_hsotg *hsotg, + struct dwc2_hsotg_ep *hs_ep, + struct dwc2_hsotg_req *hs_req) +{ + void *req_buf = hs_req->req.buf; + + /* If dma is not being used or buffer is aligned */ + if (!using_dma(hsotg) || !((long)req_buf & 3)) + return 0; + + WARN_ON(hs_req->saved_req_buf); + + dev_dbg(hsotg->dev, "%s: %s: buf=%p length=%d\n", __func__, + hs_ep->ep.name, req_buf, hs_req->req.length); + + hs_req->req.buf = kmalloc(hs_req->req.length, GFP_ATOMIC); + if (!hs_req->req.buf) { + hs_req->req.buf = req_buf; + dev_err(hsotg->dev, + "%s: unable to allocate memory for bounce buffer\n", + __func__); + return -ENOMEM; + } + + /* Save actual buffer */ + hs_req->saved_req_buf = req_buf; + + if (hs_ep->dir_in) + memcpy(hs_req->req.buf, req_buf, hs_req->req.length); + return 0; +} + +static void +dwc2_hsotg_handle_unaligned_buf_complete(struct dwc2_hsotg *hsotg, + struct dwc2_hsotg_ep *hs_ep, + struct dwc2_hsotg_req *hs_req) +{ + /* If dma is not being used or buffer was aligned */ + if (!using_dma(hsotg) || !hs_req->saved_req_buf) + return; + + dev_dbg(hsotg->dev, "%s: %s: status=%d actual-length=%d\n", __func__, + hs_ep->ep.name, hs_req->req.status, hs_req->req.actual); + + /* Copy data from bounce buffer on successful out transfer */ + if (!hs_ep->dir_in && !hs_req->req.status) + memcpy(hs_req->saved_req_buf, hs_req->req.buf, + hs_req->req.actual); + + /* Free bounce buffer */ + kfree(hs_req->req.buf); + + hs_req->req.buf = hs_req->saved_req_buf; + hs_req->saved_req_buf = NULL; +} + +/** + * dwc2_gadget_target_frame_elapsed - Checks target frame + * @hs_ep: The driver endpoint to check + * + * Returns 1 if targeted frame elapsed. If returned 1 then we need to drop + * corresponding transfer. + */ +static bool dwc2_gadget_target_frame_elapsed(struct dwc2_hsotg_ep *hs_ep) +{ + struct dwc2_hsotg *hsotg = hs_ep->parent; + u32 target_frame = hs_ep->target_frame; + u32 current_frame = hsotg->frame_number; + bool frame_overrun = hs_ep->frame_overrun; + u16 limit = DSTS_SOFFN_LIMIT; + + if (hsotg->gadget.speed != USB_SPEED_HIGH) + limit >>= 3; + + if (!frame_overrun && current_frame >= target_frame) + return true; + + if (frame_overrun && current_frame >= target_frame && + ((current_frame - target_frame) < limit / 2)) + return true; + + return false; +} + +/* + * dwc2_gadget_set_ep0_desc_chain - Set EP's desc chain pointers + * @hsotg: The driver state + * @hs_ep: the ep descriptor chain is for + * + * Called to update EP0 structure's pointers depend on stage of + * control transfer. + */ +static int dwc2_gadget_set_ep0_desc_chain(struct dwc2_hsotg *hsotg, + struct dwc2_hsotg_ep *hs_ep) +{ + switch (hsotg->ep0_state) { + case DWC2_EP0_SETUP: + case DWC2_EP0_STATUS_OUT: + hs_ep->desc_list = hsotg->setup_desc[0]; + hs_ep->desc_list_dma = hsotg->setup_desc_dma[0]; + break; + case DWC2_EP0_DATA_IN: + case DWC2_EP0_STATUS_IN: + hs_ep->desc_list = hsotg->ctrl_in_desc; + hs_ep->desc_list_dma = hsotg->ctrl_in_desc_dma; + break; + case DWC2_EP0_DATA_OUT: + hs_ep->desc_list = hsotg->ctrl_out_desc; + hs_ep->desc_list_dma = hsotg->ctrl_out_desc_dma; + break; + default: + dev_err(hsotg->dev, "invalid EP 0 state in queue %d\n", + hsotg->ep0_state); + return -EINVAL; + } + + return 0; +} + +static int dwc2_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req, + gfp_t gfp_flags) +{ + struct dwc2_hsotg_req *hs_req = our_req(req); + struct dwc2_hsotg_ep *hs_ep = our_ep(ep); + struct dwc2_hsotg *hs = hs_ep->parent; + bool first; + int ret; + u32 maxsize = 0; + u32 mask = 0; + + + dev_dbg(hs->dev, "%s: req %p: %d@%p, noi=%d, zero=%d, snok=%d\n", + ep->name, req, req->length, req->buf, req->no_interrupt, + req->zero, req->short_not_ok); + + /* Prevent new request submission when controller is suspended */ + if (hs->lx_state != DWC2_L0) { + dev_dbg(hs->dev, "%s: submit request only in active state\n", + __func__); + return -EAGAIN; + } + + /* initialise status of the request */ + INIT_LIST_HEAD(&hs_req->queue); + req->actual = 0; + req->status = -EINPROGRESS; + + /* Don't queue ISOC request if length greater than mps*mc */ + if (hs_ep->isochronous && + req->length > (hs_ep->mc * hs_ep->ep.maxpacket)) { + dev_err(hs->dev, "req length > maxpacket*mc\n"); + return -EINVAL; + } + + /* In DDMA mode for ISOC's don't queue request if length greater + * than descriptor limits. + */ + if (using_desc_dma(hs) && hs_ep->isochronous) { + maxsize = dwc2_gadget_get_desc_params(hs_ep, &mask); + if (hs_ep->dir_in && req->length > maxsize) { + dev_err(hs->dev, "wrong length %d (maxsize=%d)\n", + req->length, maxsize); + return -EINVAL; + } + + if (!hs_ep->dir_in && req->length > hs_ep->ep.maxpacket) { + dev_err(hs->dev, "ISOC OUT: wrong length %d (mps=%d)\n", + req->length, hs_ep->ep.maxpacket); + return -EINVAL; + } + } + + ret = dwc2_hsotg_handle_unaligned_buf_start(hs, hs_ep, hs_req); + if (ret) + return ret; + + /* if we're using DMA, sync the buffers as necessary */ + if (using_dma(hs)) { + ret = dwc2_hsotg_map_dma(hs, hs_ep, req); + if (ret) + return ret; + } + /* If using descriptor DMA configure EP0 descriptor chain pointers */ + if (using_desc_dma(hs) && !hs_ep->index) { + ret = dwc2_gadget_set_ep0_desc_chain(hs, hs_ep); + if (ret) + return ret; + } + + first = list_empty(&hs_ep->queue); + list_add_tail(&hs_req->queue, &hs_ep->queue); + + /* + * Handle DDMA isochronous transfers separately - just add new entry + * to the descriptor chain. + * Transfer will be started once SW gets either one of NAK or + * OutTknEpDis interrupts. + */ + if (using_desc_dma(hs) && hs_ep->isochronous) { + if (hs_ep->target_frame != TARGET_FRAME_INITIAL) { + dma_addr_t dma_addr = hs_req->req.dma; + + if (hs_req->req.num_sgs) { + WARN_ON(hs_req->req.num_sgs > 1); + dma_addr = sg_dma_address(hs_req->req.sg); + } + dwc2_gadget_fill_isoc_desc(hs_ep, dma_addr, + hs_req->req.length); + } + return 0; + } + + /* Change EP direction if status phase request is after data out */ + if (!hs_ep->index && !req->length && !hs_ep->dir_in && + hs->ep0_state == DWC2_EP0_DATA_OUT) + hs_ep->dir_in = 1; + + if (first) { + if (!hs_ep->isochronous) { + dwc2_hsotg_start_req(hs, hs_ep, hs_req, false); + return 0; + } + + /* Update current frame number value. */ + hs->frame_number = dwc2_hsotg_read_frameno(hs); + while (dwc2_gadget_target_frame_elapsed(hs_ep)) { + dwc2_gadget_incr_frame_num(hs_ep); + /* Update current frame number value once more as it + * changes here. + */ + hs->frame_number = dwc2_hsotg_read_frameno(hs); + } + + if (hs_ep->target_frame != TARGET_FRAME_INITIAL) + dwc2_hsotg_start_req(hs, hs_ep, hs_req, false); + } + return 0; +} + +static int dwc2_hsotg_ep_queue_lock(struct usb_ep *ep, struct usb_request *req, + gfp_t gfp_flags) +{ + struct dwc2_hsotg_ep *hs_ep = our_ep(ep); + struct dwc2_hsotg *hs = hs_ep->parent; + unsigned long flags; + int ret; + + spin_lock_irqsave(&hs->lock, flags); + ret = dwc2_hsotg_ep_queue(ep, req, gfp_flags); + spin_unlock_irqrestore(&hs->lock, flags); + + return ret; +} + +static void dwc2_hsotg_ep_free_request(struct usb_ep *ep, + struct usb_request *req) +{ + struct dwc2_hsotg_req *hs_req = our_req(req); + + kfree(hs_req); +} + +/** + * dwc2_hsotg_complete_oursetup - setup completion callback + * @ep: The endpoint the request was on. + * @req: The request completed. + * + * Called on completion of any requests the driver itself + * submitted that need cleaning up. + */ +static void dwc2_hsotg_complete_oursetup(struct usb_ep *ep, + struct usb_request *req) +{ + struct dwc2_hsotg_ep *hs_ep = our_ep(ep); + struct dwc2_hsotg *hsotg = hs_ep->parent; + + dev_dbg(hsotg->dev, "%s: ep %p, req %p\n", __func__, ep, req); + + dwc2_hsotg_ep_free_request(ep, req); +} + +/** + * ep_from_windex - convert control wIndex value to endpoint + * @hsotg: The driver state. + * @windex: The control request wIndex field (in host order). + * + * Convert the given wIndex into a pointer to an driver endpoint + * structure, or return NULL if it is not a valid endpoint. + */ +static struct dwc2_hsotg_ep *ep_from_windex(struct dwc2_hsotg *hsotg, + u32 windex) +{ + int dir = (windex & USB_DIR_IN) ? 1 : 0; + int idx = windex & 0x7F; + + if (windex >= 0x100) + return NULL; + + if (idx > hsotg->num_of_eps) + return NULL; + + return index_to_ep(hsotg, idx, dir); +} + +/** + * dwc2_hsotg_set_test_mode - Enable usb Test Modes + * @hsotg: The driver state. + * @testmode: requested usb test mode + * Enable usb Test Mode requested by the Host. + */ +int dwc2_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, int testmode) +{ + int dctl = dwc2_readl(hsotg, DCTL); + + dctl &= ~DCTL_TSTCTL_MASK; + switch (testmode) { + case USB_TEST_J: + case USB_TEST_K: + case USB_TEST_SE0_NAK: + case USB_TEST_PACKET: + case USB_TEST_FORCE_ENABLE: + dctl |= testmode << DCTL_TSTCTL_SHIFT; + break; + default: + return -EINVAL; + } + dwc2_writel(hsotg, dctl, DCTL); + return 0; +} + +/** + * dwc2_hsotg_send_reply - send reply to control request + * @hsotg: The device state + * @ep: Endpoint 0 + * @buff: Buffer for request + * @length: Length of reply. + * + * Create a request and queue it on the given endpoint. This is useful as + * an internal method of sending replies to certain control requests, etc. + */ +static int dwc2_hsotg_send_reply(struct dwc2_hsotg *hsotg, + struct dwc2_hsotg_ep *ep, + void *buff, + int length) +{ + struct usb_request *req; + int ret; + + dev_dbg(hsotg->dev, "%s: buff %p, len %d\n", __func__, buff, length); + + req = dwc2_hsotg_ep_alloc_request(&ep->ep, GFP_ATOMIC); + hsotg->ep0_reply = req; + if (!req) { + dev_warn(hsotg->dev, "%s: cannot alloc req\n", __func__); + return -ENOMEM; + } + + req->buf = hsotg->ep0_buff; + req->length = length; + /* + * zero flag is for sending zlp in DATA IN stage. It has no impact on + * STATUS stage. + */ + req->zero = 0; + req->complete = dwc2_hsotg_complete_oursetup; + + if (length) + memcpy(req->buf, buff, length); + + ret = dwc2_hsotg_ep_queue(&ep->ep, req, GFP_ATOMIC); + if (ret) { + dev_warn(hsotg->dev, "%s: cannot queue req\n", __func__); + return ret; + } + + return 0; +} + +/** + * dwc2_hsotg_process_req_status - process request GET_STATUS + * @hsotg: The device state + * @ctrl: USB control request + */ +static int dwc2_hsotg_process_req_status(struct dwc2_hsotg *hsotg, + struct usb_ctrlrequest *ctrl) +{ + struct dwc2_hsotg_ep *ep0 = hsotg->eps_out[0]; + struct dwc2_hsotg_ep *ep; + __le16 reply; + u16 status; + int ret; + + dev_dbg(hsotg->dev, "%s: USB_REQ_GET_STATUS\n", __func__); + + if (!ep0->dir_in) { + dev_warn(hsotg->dev, "%s: direction out?\n", __func__); + return -EINVAL; + } + + switch (ctrl->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + status = hsotg->gadget.is_selfpowered << + USB_DEVICE_SELF_POWERED; + status |= hsotg->remote_wakeup_allowed << + USB_DEVICE_REMOTE_WAKEUP; + reply = cpu_to_le16(status); + break; + + case USB_RECIP_INTERFACE: + /* currently, the data result should be zero */ + reply = cpu_to_le16(0); + break; + + case USB_RECIP_ENDPOINT: + ep = ep_from_windex(hsotg, le16_to_cpu(ctrl->wIndex)); + if (!ep) + return -ENOENT; + + reply = cpu_to_le16(ep->halted ? 1 : 0); + break; + + default: + return 0; + } + + if (le16_to_cpu(ctrl->wLength) != 2) + return -EINVAL; + + ret = dwc2_hsotg_send_reply(hsotg, ep0, &reply, 2); + if (ret) { + dev_err(hsotg->dev, "%s: failed to send reply\n", __func__); + return ret; + } + + return 1; +} + +static int dwc2_hsotg_ep_sethalt(struct usb_ep *ep, int value, bool now); + +/** + * get_ep_head - return the first request on the endpoint + * @hs_ep: The controller endpoint to get + * + * Get the first request on the endpoint. + */ +static struct dwc2_hsotg_req *get_ep_head(struct dwc2_hsotg_ep *hs_ep) +{ + return list_first_entry_or_null(&hs_ep->queue, struct dwc2_hsotg_req, + queue); +} + +/** + * dwc2_gadget_start_next_request - Starts next request from ep queue + * @hs_ep: Endpoint structure + * + * If queue is empty and EP is ISOC-OUT - unmasks OUTTKNEPDIS which is masked + * in its handler. Hence we need to unmask it here to be able to do + * resynchronization. + */ +static void dwc2_gadget_start_next_request(struct dwc2_hsotg_ep *hs_ep) +{ + struct dwc2_hsotg *hsotg = hs_ep->parent; + int dir_in = hs_ep->dir_in; + struct dwc2_hsotg_req *hs_req; + + if (!list_empty(&hs_ep->queue)) { + hs_req = get_ep_head(hs_ep); + dwc2_hsotg_start_req(hsotg, hs_ep, hs_req, false); + return; + } + if (!hs_ep->isochronous) + return; + + if (dir_in) { + dev_dbg(hsotg->dev, "%s: No more ISOC-IN requests\n", + __func__); + } else { + dev_dbg(hsotg->dev, "%s: No more ISOC-OUT requests\n", + __func__); + } +} + +/** + * dwc2_hsotg_process_req_feature - process request {SET,CLEAR}_FEATURE + * @hsotg: The device state + * @ctrl: USB control request + */ +static int dwc2_hsotg_process_req_feature(struct dwc2_hsotg *hsotg, + struct usb_ctrlrequest *ctrl) +{ + struct dwc2_hsotg_ep *ep0 = hsotg->eps_out[0]; + struct dwc2_hsotg_req *hs_req; + bool set = (ctrl->bRequest == USB_REQ_SET_FEATURE); + struct dwc2_hsotg_ep *ep; + int ret; + bool halted; + u32 recip; + u32 wValue; + u32 wIndex; + + dev_dbg(hsotg->dev, "%s: %s_FEATURE\n", + __func__, set ? "SET" : "CLEAR"); + + wValue = le16_to_cpu(ctrl->wValue); + wIndex = le16_to_cpu(ctrl->wIndex); + recip = ctrl->bRequestType & USB_RECIP_MASK; + + switch (recip) { + case USB_RECIP_DEVICE: + switch (wValue) { + case USB_DEVICE_REMOTE_WAKEUP: + if (set) + hsotg->remote_wakeup_allowed = 1; + else + hsotg->remote_wakeup_allowed = 0; + break; + + case USB_DEVICE_TEST_MODE: + if ((wIndex & 0xff) != 0) + return -EINVAL; + if (!set) + return -EINVAL; + + hsotg->test_mode = wIndex >> 8; + break; + default: + return -ENOENT; + } + + ret = dwc2_hsotg_send_reply(hsotg, ep0, NULL, 0); + if (ret) { + dev_err(hsotg->dev, + "%s: failed to send reply\n", __func__); + return ret; + } + break; + + case USB_RECIP_ENDPOINT: + ep = ep_from_windex(hsotg, wIndex); + if (!ep) { + dev_dbg(hsotg->dev, "%s: no endpoint for 0x%04x\n", + __func__, wIndex); + return -ENOENT; + } + + switch (wValue) { + case USB_ENDPOINT_HALT: + halted = ep->halted; + + if (!ep->wedged) + dwc2_hsotg_ep_sethalt(&ep->ep, set, true); + + ret = dwc2_hsotg_send_reply(hsotg, ep0, NULL, 0); + if (ret) { + dev_err(hsotg->dev, + "%s: failed to send reply\n", __func__); + return ret; + } + + /* + * we have to complete all requests for ep if it was + * halted, and the halt was cleared by CLEAR_FEATURE + */ + + if (!set && halted) { + /* + * If we have request in progress, + * then complete it + */ + if (ep->req) { + hs_req = ep->req; + ep->req = NULL; + list_del_init(&hs_req->queue); + if (hs_req->req.complete) { + spin_unlock(&hsotg->lock); + usb_gadget_giveback_request( + &ep->ep, &hs_req->req); + spin_lock(&hsotg->lock); + } + } + + /* If we have pending request, then start it */ + if (!ep->req) + dwc2_gadget_start_next_request(ep); + } + + break; + + default: + return -ENOENT; + } + break; + default: + return -ENOENT; + } + return 1; +} + +static void dwc2_hsotg_enqueue_setup(struct dwc2_hsotg *hsotg); + +/** + * dwc2_hsotg_stall_ep0 - stall ep0 + * @hsotg: The device state + * + * Set stall for ep0 as response for setup request. + */ +static void dwc2_hsotg_stall_ep0(struct dwc2_hsotg *hsotg) +{ + struct dwc2_hsotg_ep *ep0 = hsotg->eps_out[0]; + u32 reg; + u32 ctrl; + + dev_dbg(hsotg->dev, "ep0 stall (dir=%d)\n", ep0->dir_in); + reg = (ep0->dir_in) ? DIEPCTL0 : DOEPCTL0; + + /* + * DxEPCTL_Stall will be cleared by EP once it has + * taken effect, so no need to clear later. + */ + + ctrl = dwc2_readl(hsotg, reg); + ctrl |= DXEPCTL_STALL; + ctrl |= DXEPCTL_CNAK; + dwc2_writel(hsotg, ctrl, reg); + + dev_dbg(hsotg->dev, + "written DXEPCTL=0x%08x to %08x (DXEPCTL=0x%08x)\n", + ctrl, reg, dwc2_readl(hsotg, reg)); + + /* + * complete won't be called, so we enqueue + * setup request here + */ + dwc2_hsotg_enqueue_setup(hsotg); +} + +/** + * dwc2_hsotg_process_control - process a control request + * @hsotg: The device state + * @ctrl: The control request received + * + * The controller has received the SETUP phase of a control request, and + * needs to work out what to do next (and whether to pass it on to the + * gadget driver). + */ +static void dwc2_hsotg_process_control(struct dwc2_hsotg *hsotg, + struct usb_ctrlrequest *ctrl) +{ + struct dwc2_hsotg_ep *ep0 = hsotg->eps_out[0]; + int ret = 0; + u32 dcfg; + + dev_dbg(hsotg->dev, + "ctrl Type=%02x, Req=%02x, V=%04x, I=%04x, L=%04x\n", + ctrl->bRequestType, ctrl->bRequest, ctrl->wValue, + ctrl->wIndex, ctrl->wLength); + + if (ctrl->wLength == 0) { + ep0->dir_in = 1; + hsotg->ep0_state = DWC2_EP0_STATUS_IN; + } else if (ctrl->bRequestType & USB_DIR_IN) { + ep0->dir_in = 1; + hsotg->ep0_state = DWC2_EP0_DATA_IN; + } else { + ep0->dir_in = 0; + hsotg->ep0_state = DWC2_EP0_DATA_OUT; + } + + if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { + switch (ctrl->bRequest) { + case USB_REQ_SET_ADDRESS: + hsotg->connected = 1; + dcfg = dwc2_readl(hsotg, DCFG); + dcfg &= ~DCFG_DEVADDR_MASK; + dcfg |= (le16_to_cpu(ctrl->wValue) << + DCFG_DEVADDR_SHIFT) & DCFG_DEVADDR_MASK; + dwc2_writel(hsotg, dcfg, DCFG); + + dev_info(hsotg->dev, "new address %d\n", ctrl->wValue); + + ret = dwc2_hsotg_send_reply(hsotg, ep0, NULL, 0); + return; + + case USB_REQ_GET_STATUS: + ret = dwc2_hsotg_process_req_status(hsotg, ctrl); + break; + + case USB_REQ_CLEAR_FEATURE: + case USB_REQ_SET_FEATURE: + ret = dwc2_hsotg_process_req_feature(hsotg, ctrl); + break; + } + } + + /* as a fallback, try delivering it to the driver to deal with */ + + if (ret == 0 && hsotg->driver) { + spin_unlock(&hsotg->lock); + ret = hsotg->driver->setup(&hsotg->gadget, ctrl); + spin_lock(&hsotg->lock); + if (ret < 0) + dev_dbg(hsotg->dev, "driver->setup() ret %d\n", ret); + } + + hsotg->delayed_status = false; + if (ret == USB_GADGET_DELAYED_STATUS) + hsotg->delayed_status = true; + + /* + * the request is either unhandlable, or is not formatted correctly + * so respond with a STALL for the status stage to indicate failure. + */ + + if (ret < 0) + dwc2_hsotg_stall_ep0(hsotg); +} + +/** + * dwc2_hsotg_complete_setup - completion of a setup transfer + * @ep: The endpoint the request was on. + * @req: The request completed. + * + * Called on completion of any requests the driver itself submitted for + * EP0 setup packets + */ +static void dwc2_hsotg_complete_setup(struct usb_ep *ep, + struct usb_request *req) +{ + struct dwc2_hsotg_ep *hs_ep = our_ep(ep); + struct dwc2_hsotg *hsotg = hs_ep->parent; + + if (req->status < 0) { + dev_dbg(hsotg->dev, "%s: failed %d\n", __func__, req->status); + return; + } + + spin_lock(&hsotg->lock); + if (req->actual == 0) + dwc2_hsotg_enqueue_setup(hsotg); + else + dwc2_hsotg_process_control(hsotg, req->buf); + spin_unlock(&hsotg->lock); +} + +/** + * dwc2_hsotg_enqueue_setup - start a request for EP0 packets + * @hsotg: The device state. + * + * Enqueue a request on EP0 if necessary to received any SETUP packets + * received from the host. + */ +static void dwc2_hsotg_enqueue_setup(struct dwc2_hsotg *hsotg) +{ + struct usb_request *req = hsotg->ctrl_req; + struct dwc2_hsotg_req *hs_req = our_req(req); + int ret; + + dev_dbg(hsotg->dev, "%s: queueing setup request\n", __func__); + + req->zero = 0; + req->length = 8; + req->buf = hsotg->ctrl_buff; + req->complete = dwc2_hsotg_complete_setup; + + if (!list_empty(&hs_req->queue)) { + dev_dbg(hsotg->dev, "%s already queued???\n", __func__); + return; + } + + hsotg->eps_out[0]->dir_in = 0; + hsotg->eps_out[0]->send_zlp = 0; + hsotg->ep0_state = DWC2_EP0_SETUP; + + ret = dwc2_hsotg_ep_queue(&hsotg->eps_out[0]->ep, req, GFP_ATOMIC); + if (ret < 0) { + dev_err(hsotg->dev, "%s: failed queue (%d)\n", __func__, ret); + /* + * Don't think there's much we can do other than watch the + * driver fail. + */ + } +} + +static void dwc2_hsotg_program_zlp(struct dwc2_hsotg *hsotg, + struct dwc2_hsotg_ep *hs_ep) +{ + u32 ctrl; + u8 index = hs_ep->index; + u32 epctl_reg = hs_ep->dir_in ? DIEPCTL(index) : DOEPCTL(index); + u32 epsiz_reg = hs_ep->dir_in ? DIEPTSIZ(index) : DOEPTSIZ(index); + + if (hs_ep->dir_in) + dev_dbg(hsotg->dev, "Sending zero-length packet on ep%d\n", + index); + else + dev_dbg(hsotg->dev, "Receiving zero-length packet on ep%d\n", + index); + if (using_desc_dma(hsotg)) { + /* Not specific buffer needed for ep0 ZLP */ + dma_addr_t dma = hs_ep->desc_list_dma; + + if (!index) + dwc2_gadget_set_ep0_desc_chain(hsotg, hs_ep); + + dwc2_gadget_config_nonisoc_xfer_ddma(hs_ep, dma, 0); + } else { + dwc2_writel(hsotg, DXEPTSIZ_MC(1) | DXEPTSIZ_PKTCNT(1) | + DXEPTSIZ_XFERSIZE(0), + epsiz_reg); + } + + ctrl = dwc2_readl(hsotg, epctl_reg); + ctrl |= DXEPCTL_CNAK; /* clear NAK set by core */ + ctrl |= DXEPCTL_EPENA; /* ensure ep enabled */ + ctrl |= DXEPCTL_USBACTEP; + dwc2_writel(hsotg, ctrl, epctl_reg); +} + +/** + * dwc2_hsotg_complete_request - complete a request given to us + * @hsotg: The device state. + * @hs_ep: The endpoint the request was on. + * @hs_req: The request to complete. + * @result: The result code (0 => Ok, otherwise errno) + * + * The given request has finished, so call the necessary completion + * if it has one and then look to see if we can start a new request + * on the endpoint. + * + * Note, expects the ep to already be locked as appropriate. + */ +static void dwc2_hsotg_complete_request(struct dwc2_hsotg *hsotg, + struct dwc2_hsotg_ep *hs_ep, + struct dwc2_hsotg_req *hs_req, + int result) +{ + if (!hs_req) { + dev_dbg(hsotg->dev, "%s: nothing to complete?\n", __func__); + return; + } + + dev_dbg(hsotg->dev, "complete: ep %p %s, req %p, %d => %p\n", + hs_ep, hs_ep->ep.name, hs_req, result, hs_req->req.complete); + + /* + * only replace the status if we've not already set an error + * from a previous transaction + */ + + if (hs_req->req.status == -EINPROGRESS) + hs_req->req.status = result; + + if (using_dma(hsotg)) + dwc2_hsotg_unmap_dma(hsotg, hs_ep, hs_req); + + dwc2_hsotg_handle_unaligned_buf_complete(hsotg, hs_ep, hs_req); + + hs_ep->req = NULL; + list_del_init(&hs_req->queue); + + /* + * call the complete request with the locks off, just in case the + * request tries to queue more work for this endpoint. + */ + + if (hs_req->req.complete) { + spin_unlock(&hsotg->lock); + usb_gadget_giveback_request(&hs_ep->ep, &hs_req->req); + spin_lock(&hsotg->lock); + } + + /* In DDMA don't need to proceed to starting of next ISOC request */ + if (using_desc_dma(hsotg) && hs_ep->isochronous) + return; + + /* + * Look to see if there is anything else to do. Note, the completion + * of the previous request may have caused a new request to be started + * so be careful when doing this. + */ + + if (!hs_ep->req && result >= 0) + dwc2_gadget_start_next_request(hs_ep); +} + +/* + * dwc2_gadget_complete_isoc_request_ddma - complete an isoc request in DDMA + * @hs_ep: The endpoint the request was on. + * + * Get first request from the ep queue, determine descriptor on which complete + * happened. SW discovers which descriptor currently in use by HW, adjusts + * dma_address and calculates index of completed descriptor based on the value + * of DEPDMA register. Update actual length of request, giveback to gadget. + */ +static void dwc2_gadget_complete_isoc_request_ddma(struct dwc2_hsotg_ep *hs_ep) +{ + struct dwc2_hsotg *hsotg = hs_ep->parent; + struct dwc2_hsotg_req *hs_req; + struct usb_request *ureq; + u32 desc_sts; + u32 mask; + + desc_sts = hs_ep->desc_list[hs_ep->compl_desc].status; + + /* Process only descriptors with buffer status set to DMA done */ + while ((desc_sts & DEV_DMA_BUFF_STS_MASK) >> + DEV_DMA_BUFF_STS_SHIFT == DEV_DMA_BUFF_STS_DMADONE) { + + hs_req = get_ep_head(hs_ep); + if (!hs_req) { + dev_warn(hsotg->dev, "%s: ISOC EP queue empty\n", __func__); + return; + } + ureq = &hs_req->req; + + /* Check completion status */ + if ((desc_sts & DEV_DMA_STS_MASK) >> DEV_DMA_STS_SHIFT == + DEV_DMA_STS_SUCC) { + mask = hs_ep->dir_in ? DEV_DMA_ISOC_TX_NBYTES_MASK : + DEV_DMA_ISOC_RX_NBYTES_MASK; + ureq->actual = ureq->length - ((desc_sts & mask) >> + DEV_DMA_ISOC_NBYTES_SHIFT); + + /* Adjust actual len for ISOC Out if len is + * not align of 4 + */ + if (!hs_ep->dir_in && ureq->length & 0x3) + ureq->actual += 4 - (ureq->length & 0x3); + + /* Set actual frame number for completed transfers */ + ureq->frame_number = + (desc_sts & DEV_DMA_ISOC_FRNUM_MASK) >> + DEV_DMA_ISOC_FRNUM_SHIFT; + } + + dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, 0); + + hs_ep->compl_desc++; + if (hs_ep->compl_desc > (MAX_DMA_DESC_NUM_HS_ISOC - 1)) + hs_ep->compl_desc = 0; + desc_sts = hs_ep->desc_list[hs_ep->compl_desc].status; + } +} + +/* + * dwc2_gadget_handle_isoc_bna - handle BNA interrupt for ISOC. + * @hs_ep: The isochronous endpoint. + * + * If EP ISOC OUT then need to flush RX FIFO to remove source of BNA + * interrupt. Reset target frame and next_desc to allow to start + * ISOC's on NAK interrupt for IN direction or on OUTTKNEPDIS + * interrupt for OUT direction. + */ +static void dwc2_gadget_handle_isoc_bna(struct dwc2_hsotg_ep *hs_ep) +{ + struct dwc2_hsotg *hsotg = hs_ep->parent; + + if (!hs_ep->dir_in) + dwc2_flush_rx_fifo(hsotg); + dwc2_hsotg_complete_request(hsotg, hs_ep, get_ep_head(hs_ep), 0); + + hs_ep->target_frame = TARGET_FRAME_INITIAL; + hs_ep->next_desc = 0; + hs_ep->compl_desc = 0; +} + +/** + * dwc2_hsotg_rx_data - receive data from the FIFO for an endpoint + * @hsotg: The device state. + * @ep_idx: The endpoint index for the data + * @size: The size of data in the fifo, in bytes + * + * The FIFO status shows there is data to read from the FIFO for a given + * endpoint, so sort out whether we need to read the data into a request + * that has been made for that endpoint. + */ +static void dwc2_hsotg_rx_data(struct dwc2_hsotg *hsotg, int ep_idx, int size) +{ + struct dwc2_hsotg_ep *hs_ep = hsotg->eps_out[ep_idx]; + struct dwc2_hsotg_req *hs_req = hs_ep->req; + int to_read; + int max_req; + int read_ptr; + + if (!hs_req) { + u32 epctl = dwc2_readl(hsotg, DOEPCTL(ep_idx)); + int ptr; + + dev_dbg(hsotg->dev, + "%s: FIFO %d bytes on ep%d but no req (DXEPCTl=0x%08x)\n", + __func__, size, ep_idx, epctl); + + /* dump the data from the FIFO, we've nothing we can do */ + for (ptr = 0; ptr < size; ptr += 4) + (void)dwc2_readl(hsotg, EPFIFO(ep_idx)); + + return; + } + + to_read = size; + read_ptr = hs_req->req.actual; + max_req = hs_req->req.length - read_ptr; + + dev_dbg(hsotg->dev, "%s: read %d/%d, done %d/%d\n", + __func__, to_read, max_req, read_ptr, hs_req->req.length); + + if (to_read > max_req) { + /* + * more data appeared than we where willing + * to deal with in this request. + */ + + /* currently we don't deal this */ + WARN_ON_ONCE(1); + } + + hs_ep->total_data += to_read; + hs_req->req.actual += to_read; + to_read = DIV_ROUND_UP(to_read, 4); + + /* + * note, we might over-write the buffer end by 3 bytes depending on + * alignment of the data. + */ + dwc2_readl_rep(hsotg, EPFIFO(ep_idx), + hs_req->req.buf + read_ptr, to_read); +} + +/** + * dwc2_hsotg_ep0_zlp - send/receive zero-length packet on control endpoint + * @hsotg: The device instance + * @dir_in: If IN zlp + * + * Generate a zero-length IN packet request for terminating a SETUP + * transaction. + * + * Note, since we don't write any data to the TxFIFO, then it is + * currently believed that we do not need to wait for any space in + * the TxFIFO. + */ +static void dwc2_hsotg_ep0_zlp(struct dwc2_hsotg *hsotg, bool dir_in) +{ + /* eps_out[0] is used in both directions */ + hsotg->eps_out[0]->dir_in = dir_in; + hsotg->ep0_state = dir_in ? DWC2_EP0_STATUS_IN : DWC2_EP0_STATUS_OUT; + + dwc2_hsotg_program_zlp(hsotg, hsotg->eps_out[0]); +} + +/* + * dwc2_gadget_get_xfersize_ddma - get transferred bytes amount from desc + * @hs_ep - The endpoint on which transfer went + * + * Iterate over endpoints descriptor chain and get info on bytes remained + * in DMA descriptors after transfer has completed. Used for non isoc EPs. + */ +static unsigned int dwc2_gadget_get_xfersize_ddma(struct dwc2_hsotg_ep *hs_ep) +{ + const struct usb_endpoint_descriptor *ep_desc = hs_ep->ep.desc; + struct dwc2_hsotg *hsotg = hs_ep->parent; + unsigned int bytes_rem = 0; + unsigned int bytes_rem_correction = 0; + struct dwc2_dma_desc *desc = hs_ep->desc_list; + int i; + u32 status; + u32 mps = hs_ep->ep.maxpacket; + int dir_in = hs_ep->dir_in; + + if (!desc) + return -EINVAL; + + /* Interrupt OUT EP with mps not multiple of 4 */ + if (hs_ep->index) + if (usb_endpoint_xfer_int(ep_desc) && !dir_in && (mps % 4)) + bytes_rem_correction = 4 - (mps % 4); + + for (i = 0; i < hs_ep->desc_count; ++i) { + status = desc->status; + bytes_rem += status & DEV_DMA_NBYTES_MASK; + bytes_rem -= bytes_rem_correction; + + if (status & DEV_DMA_STS_MASK) + dev_err(hsotg->dev, "descriptor %d closed with %x\n", + i, status & DEV_DMA_STS_MASK); + + if (status & DEV_DMA_L) + break; + + desc++; + } + + return bytes_rem; +} + +/** + * dwc2_hsotg_handle_outdone - handle receiving OutDone/SetupDone from RXFIFO + * @hsotg: The device instance + * @epnum: The endpoint received from + * + * The RXFIFO has delivered an OutDone event, which means that the data + * transfer for an OUT endpoint has been completed, either by a short + * packet or by the finish of a transfer. + */ +static void dwc2_hsotg_handle_outdone(struct dwc2_hsotg *hsotg, int epnum) +{ + u32 epsize = dwc2_readl(hsotg, DOEPTSIZ(epnum)); + struct dwc2_hsotg_ep *hs_ep = hsotg->eps_out[epnum]; + struct dwc2_hsotg_req *hs_req = hs_ep->req; + struct usb_request *req = &hs_req->req; + unsigned int size_left = DXEPTSIZ_XFERSIZE_GET(epsize); + int result = 0; + + if (!hs_req) { + dev_dbg(hsotg->dev, "%s: no request active\n", __func__); + return; + } + + if (epnum == 0 && hsotg->ep0_state == DWC2_EP0_STATUS_OUT) { + dev_dbg(hsotg->dev, "zlp packet received\n"); + dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, 0); + dwc2_hsotg_enqueue_setup(hsotg); + return; + } + + if (using_desc_dma(hsotg)) + size_left = dwc2_gadget_get_xfersize_ddma(hs_ep); + + if (using_dma(hsotg)) { + unsigned int size_done; + + /* + * Calculate the size of the transfer by checking how much + * is left in the endpoint size register and then working it + * out from the amount we loaded for the transfer. + * + * We need to do this as DMA pointers are always 32bit aligned + * so may overshoot/undershoot the transfer. + */ + + size_done = hs_ep->size_loaded - size_left; + size_done += hs_ep->last_load; + + req->actual = size_done; + } + + /* if there is more request to do, schedule new transfer */ + if (req->actual < req->length && size_left == 0) { + dwc2_hsotg_start_req(hsotg, hs_ep, hs_req, true); + return; + } + + if (req->actual < req->length && req->short_not_ok) { + dev_dbg(hsotg->dev, "%s: got %d/%d (short not ok) => error\n", + __func__, req->actual, req->length); + + /* + * todo - what should we return here? there's no one else + * even bothering to check the status. + */ + } + + /* DDMA IN status phase will start from StsPhseRcvd interrupt */ + if (!using_desc_dma(hsotg) && epnum == 0 && + hsotg->ep0_state == DWC2_EP0_DATA_OUT) { + /* Move to STATUS IN */ + if (!hsotg->delayed_status) + dwc2_hsotg_ep0_zlp(hsotg, true); + } + + /* Set actual frame number for completed transfers */ + if (!using_desc_dma(hsotg) && hs_ep->isochronous) { + req->frame_number = hs_ep->target_frame; + dwc2_gadget_incr_frame_num(hs_ep); + } + + dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, result); +} + +/** + * dwc2_hsotg_handle_rx - RX FIFO has data + * @hsotg: The device instance + * + * The IRQ handler has detected that the RX FIFO has some data in it + * that requires processing, so find out what is in there and do the + * appropriate read. + * + * The RXFIFO is a true FIFO, the packets coming out are still in packet + * chunks, so if you have x packets received on an endpoint you'll get x + * FIFO events delivered, each with a packet's worth of data in it. + * + * When using DMA, we should not be processing events from the RXFIFO + * as the actual data should be sent to the memory directly and we turn + * on the completion interrupts to get notifications of transfer completion. + */ +static void dwc2_hsotg_handle_rx(struct dwc2_hsotg *hsotg) +{ + u32 grxstsr = dwc2_readl(hsotg, GRXSTSP); + u32 epnum, status, size; + + WARN_ON(using_dma(hsotg)); + + epnum = grxstsr & GRXSTS_EPNUM_MASK; + status = grxstsr & GRXSTS_PKTSTS_MASK; + + size = grxstsr & GRXSTS_BYTECNT_MASK; + size >>= GRXSTS_BYTECNT_SHIFT; + + dev_dbg(hsotg->dev, "%s: GRXSTSP=0x%08x (%d@%d)\n", + __func__, grxstsr, size, epnum); + + switch ((status & GRXSTS_PKTSTS_MASK) >> GRXSTS_PKTSTS_SHIFT) { + case GRXSTS_PKTSTS_GLOBALOUTNAK: + dev_dbg(hsotg->dev, "GLOBALOUTNAK\n"); + break; + + case GRXSTS_PKTSTS_OUTDONE: + dev_dbg(hsotg->dev, "OutDone (Frame=0x%08x)\n", + dwc2_hsotg_read_frameno(hsotg)); + + if (!using_dma(hsotg)) + dwc2_hsotg_handle_outdone(hsotg, epnum); + break; + + case GRXSTS_PKTSTS_SETUPDONE: + dev_dbg(hsotg->dev, + "SetupDone (Frame=0x%08x, DOPEPCTL=0x%08x)\n", + dwc2_hsotg_read_frameno(hsotg), + dwc2_readl(hsotg, DOEPCTL(0))); + /* + * Call dwc2_hsotg_handle_outdone here if it was not called from + * GRXSTS_PKTSTS_OUTDONE. That is, if the core didn't + * generate GRXSTS_PKTSTS_OUTDONE for setup packet. + */ + if (hsotg->ep0_state == DWC2_EP0_SETUP) + dwc2_hsotg_handle_outdone(hsotg, epnum); + break; + + case GRXSTS_PKTSTS_OUTRX: + dwc2_hsotg_rx_data(hsotg, epnum, size); + break; + + case GRXSTS_PKTSTS_SETUPRX: + dev_dbg(hsotg->dev, + "SetupRX (Frame=0x%08x, DOPEPCTL=0x%08x)\n", + dwc2_hsotg_read_frameno(hsotg), + dwc2_readl(hsotg, DOEPCTL(0))); + + WARN_ON(hsotg->ep0_state != DWC2_EP0_SETUP); + + dwc2_hsotg_rx_data(hsotg, epnum, size); + break; + + default: + dev_warn(hsotg->dev, "%s: unknown status %08x\n", + __func__, grxstsr); + + dwc2_hsotg_dump(hsotg); + break; + } +} + +/** + * dwc2_hsotg_ep0_mps - turn max packet size into register setting + * @mps: The maximum packet size in bytes. + */ +static u32 dwc2_hsotg_ep0_mps(unsigned int mps) +{ + switch (mps) { + case 64: + return D0EPCTL_MPS_64; + case 32: + return D0EPCTL_MPS_32; + case 16: + return D0EPCTL_MPS_16; + case 8: + return D0EPCTL_MPS_8; + } + + /* bad max packet size, warn and return invalid result */ + WARN_ON(1); + return (u32)-1; +} + +/** + * dwc2_hsotg_set_ep_maxpacket - set endpoint's max-packet field + * @hsotg: The driver state. + * @ep: The index number of the endpoint + * @mps: The maximum packet size in bytes + * @mc: The multicount value + * @dir_in: True if direction is in. + * + * Configure the maximum packet size for the given endpoint, updating + * the hardware control registers to reflect this. + */ +static void dwc2_hsotg_set_ep_maxpacket(struct dwc2_hsotg *hsotg, + unsigned int ep, unsigned int mps, + unsigned int mc, unsigned int dir_in) +{ + struct dwc2_hsotg_ep *hs_ep; + u32 reg; + + hs_ep = index_to_ep(hsotg, ep, dir_in); + if (!hs_ep) + return; + + if (ep == 0) { + u32 mps_bytes = mps; + + /* EP0 is a special case */ + mps = dwc2_hsotg_ep0_mps(mps_bytes); + if (mps > 3) + goto bad_mps; + hs_ep->ep.maxpacket = mps_bytes; + hs_ep->mc = 1; + } else { + if (mps > 1024) + goto bad_mps; + hs_ep->mc = mc; + if (mc > 3) + goto bad_mps; + hs_ep->ep.maxpacket = mps; + } + + if (dir_in) { + reg = dwc2_readl(hsotg, DIEPCTL(ep)); + reg &= ~DXEPCTL_MPS_MASK; + reg |= mps; + dwc2_writel(hsotg, reg, DIEPCTL(ep)); + } else { + reg = dwc2_readl(hsotg, DOEPCTL(ep)); + reg &= ~DXEPCTL_MPS_MASK; + reg |= mps; + dwc2_writel(hsotg, reg, DOEPCTL(ep)); + } + + return; + +bad_mps: + dev_err(hsotg->dev, "ep%d: bad mps of %d\n", ep, mps); +} + +/** + * dwc2_hsotg_txfifo_flush - flush Tx FIFO + * @hsotg: The driver state + * @idx: The index for the endpoint (0..15) + */ +static void dwc2_hsotg_txfifo_flush(struct dwc2_hsotg *hsotg, unsigned int idx) +{ + dwc2_writel(hsotg, GRSTCTL_TXFNUM(idx) | GRSTCTL_TXFFLSH, + GRSTCTL); + + /* wait until the fifo is flushed */ + if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL, GRSTCTL_TXFFLSH, 100)) + dev_warn(hsotg->dev, "%s: timeout flushing fifo GRSTCTL_TXFFLSH\n", + __func__); +} + +/** + * dwc2_hsotg_trytx - check to see if anything needs transmitting + * @hsotg: The driver state + * @hs_ep: The driver endpoint to check. + * + * Check to see if there is a request that has data to send, and if so + * make an attempt to write data into the FIFO. + */ +static int dwc2_hsotg_trytx(struct dwc2_hsotg *hsotg, + struct dwc2_hsotg_ep *hs_ep) +{ + struct dwc2_hsotg_req *hs_req = hs_ep->req; + + if (!hs_ep->dir_in || !hs_req) { + /** + * if request is not enqueued, we disable interrupts + * for endpoints, excepting ep0 + */ + if (hs_ep->index != 0) + dwc2_hsotg_ctrl_epint(hsotg, hs_ep->index, + hs_ep->dir_in, 0); + return 0; + } + + if (hs_req->req.actual < hs_req->req.length) { + dev_dbg(hsotg->dev, "trying to write more for ep%d\n", + hs_ep->index); + return dwc2_hsotg_write_fifo(hsotg, hs_ep, hs_req); + } + + return 0; +} + +/** + * dwc2_hsotg_complete_in - complete IN transfer + * @hsotg: The device state. + * @hs_ep: The endpoint that has just completed. + * + * An IN transfer has been completed, update the transfer's state and then + * call the relevant completion routines. + */ +static void dwc2_hsotg_complete_in(struct dwc2_hsotg *hsotg, + struct dwc2_hsotg_ep *hs_ep) +{ + struct dwc2_hsotg_req *hs_req = hs_ep->req; + u32 epsize = dwc2_readl(hsotg, DIEPTSIZ(hs_ep->index)); + int size_left, size_done; + + if (!hs_req) { + dev_dbg(hsotg->dev, "XferCompl but no req\n"); + return; + } + + /* Finish ZLP handling for IN EP0 transactions */ + if (hs_ep->index == 0 && hsotg->ep0_state == DWC2_EP0_STATUS_IN) { + dev_dbg(hsotg->dev, "zlp packet sent\n"); + + /* + * While send zlp for DWC2_EP0_STATUS_IN EP direction was + * changed to IN. Change back to complete OUT transfer request + */ + hs_ep->dir_in = 0; + + dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, 0); + if (hsotg->test_mode) { + int ret; + + ret = dwc2_hsotg_set_test_mode(hsotg, hsotg->test_mode); + if (ret < 0) { + dev_dbg(hsotg->dev, "Invalid Test #%d\n", + hsotg->test_mode); + dwc2_hsotg_stall_ep0(hsotg); + return; + } + } + dwc2_hsotg_enqueue_setup(hsotg); + return; + } + + /* + * Calculate the size of the transfer by checking how much is left + * in the endpoint size register and then working it out from + * the amount we loaded for the transfer. + * + * We do this even for DMA, as the transfer may have incremented + * past the end of the buffer (DMA transfers are always 32bit + * aligned). + */ + if (using_desc_dma(hsotg)) { + size_left = dwc2_gadget_get_xfersize_ddma(hs_ep); + if (size_left < 0) + dev_err(hsotg->dev, "error parsing DDMA results %d\n", + size_left); + } else { + size_left = DXEPTSIZ_XFERSIZE_GET(epsize); + } + + size_done = hs_ep->size_loaded - size_left; + size_done += hs_ep->last_load; + + if (hs_req->req.actual != size_done) + dev_dbg(hsotg->dev, "%s: adjusting size done %d => %d\n", + __func__, hs_req->req.actual, size_done); + + hs_req->req.actual = size_done; + dev_dbg(hsotg->dev, "req->length:%d req->actual:%d req->zero:%d\n", + hs_req->req.length, hs_req->req.actual, hs_req->req.zero); + + if (!size_left && hs_req->req.actual < hs_req->req.length) { + dev_dbg(hsotg->dev, "%s trying more for req...\n", __func__); + dwc2_hsotg_start_req(hsotg, hs_ep, hs_req, true); + return; + } + + /* Zlp for all endpoints in non DDMA, for ep0 only in DATA IN stage */ + if (hs_ep->send_zlp) { + hs_ep->send_zlp = 0; + if (!using_desc_dma(hsotg)) { + dwc2_hsotg_program_zlp(hsotg, hs_ep); + /* transfer will be completed on next complete interrupt */ + return; + } + } + + if (hs_ep->index == 0 && hsotg->ep0_state == DWC2_EP0_DATA_IN) { + /* Move to STATUS OUT */ + dwc2_hsotg_ep0_zlp(hsotg, false); + return; + } + + /* Set actual frame number for completed transfers */ + if (!using_desc_dma(hsotg) && hs_ep->isochronous) { + hs_req->req.frame_number = hs_ep->target_frame; + dwc2_gadget_incr_frame_num(hs_ep); + } + + dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, 0); +} + +/** + * dwc2_gadget_read_ep_interrupts - reads interrupts for given ep + * @hsotg: The device state. + * @idx: Index of ep. + * @dir_in: Endpoint direction 1-in 0-out. + * + * Reads for endpoint with given index and direction, by masking + * epint_reg with coresponding mask. + */ +static u32 dwc2_gadget_read_ep_interrupts(struct dwc2_hsotg *hsotg, + unsigned int idx, int dir_in) +{ + u32 epmsk_reg = dir_in ? DIEPMSK : DOEPMSK; + u32 epint_reg = dir_in ? DIEPINT(idx) : DOEPINT(idx); + u32 ints; + u32 mask; + u32 diepempmsk; + + mask = dwc2_readl(hsotg, epmsk_reg); + diepempmsk = dwc2_readl(hsotg, DIEPEMPMSK); + mask |= ((diepempmsk >> idx) & 0x1) ? DIEPMSK_TXFIFOEMPTY : 0; + mask |= DXEPINT_SETUP_RCVD; + + ints = dwc2_readl(hsotg, epint_reg); + ints &= mask; + return ints; +} + +/** + * dwc2_gadget_handle_ep_disabled - handle DXEPINT_EPDISBLD + * @hs_ep: The endpoint on which interrupt is asserted. + * + * This interrupt indicates that the endpoint has been disabled per the + * application's request. + * + * For IN endpoints flushes txfifo, in case of BULK clears DCTL_CGNPINNAK, + * in case of ISOC completes current request. + * + * For ISOC-OUT endpoints completes expired requests. If there is remaining + * request starts it. + */ +static void dwc2_gadget_handle_ep_disabled(struct dwc2_hsotg_ep *hs_ep) +{ + struct dwc2_hsotg *hsotg = hs_ep->parent; + struct dwc2_hsotg_req *hs_req; + unsigned char idx = hs_ep->index; + int dir_in = hs_ep->dir_in; + u32 epctl_reg = dir_in ? DIEPCTL(idx) : DOEPCTL(idx); + int dctl = dwc2_readl(hsotg, DCTL); + + dev_dbg(hsotg->dev, "%s: EPDisbld\n", __func__); + + if (dir_in) { + int epctl = dwc2_readl(hsotg, epctl_reg); + + dwc2_hsotg_txfifo_flush(hsotg, hs_ep->fifo_index); + + if ((epctl & DXEPCTL_STALL) && (epctl & DXEPCTL_EPTYPE_BULK)) { + int dctl = dwc2_readl(hsotg, DCTL); + + dctl |= DCTL_CGNPINNAK; + dwc2_writel(hsotg, dctl, DCTL); + } + } else { + + if (dctl & DCTL_GOUTNAKSTS) { + dctl |= DCTL_CGOUTNAK; + dwc2_writel(hsotg, dctl, DCTL); + } + } + + if (!hs_ep->isochronous) + return; + + if (list_empty(&hs_ep->queue)) { + dev_dbg(hsotg->dev, "%s: complete_ep 0x%p, ep->queue empty!\n", + __func__, hs_ep); + return; + } + + do { + hs_req = get_ep_head(hs_ep); + if (hs_req) { + hs_req->req.frame_number = hs_ep->target_frame; + hs_req->req.actual = 0; + dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, + -ENODATA); + } + dwc2_gadget_incr_frame_num(hs_ep); + /* Update current frame number value. */ + hsotg->frame_number = dwc2_hsotg_read_frameno(hsotg); + } while (dwc2_gadget_target_frame_elapsed(hs_ep)); +} + +/** + * dwc2_gadget_handle_out_token_ep_disabled - handle DXEPINT_OUTTKNEPDIS + * @ep: The endpoint on which interrupt is asserted. + * + * This is starting point for ISOC-OUT transfer, synchronization done with + * first out token received from host while corresponding EP is disabled. + * + * Device does not know initial frame in which out token will come. For this + * HW generates OUTTKNEPDIS - out token is received while EP is disabled. Upon + * getting this interrupt SW starts calculation for next transfer frame. + */ +static void dwc2_gadget_handle_out_token_ep_disabled(struct dwc2_hsotg_ep *ep) +{ + struct dwc2_hsotg *hsotg = ep->parent; + struct dwc2_hsotg_req *hs_req; + int dir_in = ep->dir_in; + + if (dir_in || !ep->isochronous) + return; + + if (using_desc_dma(hsotg)) { + if (ep->target_frame == TARGET_FRAME_INITIAL) { + /* Start first ISO Out */ + ep->target_frame = hsotg->frame_number; + dwc2_gadget_start_isoc_ddma(ep); + } + return; + } + + if (ep->target_frame == TARGET_FRAME_INITIAL) { + u32 ctrl; + + ep->target_frame = hsotg->frame_number; + if (ep->interval > 1) { + ctrl = dwc2_readl(hsotg, DOEPCTL(ep->index)); + if (ep->target_frame & 0x1) + ctrl |= DXEPCTL_SETODDFR; + else + ctrl |= DXEPCTL_SETEVENFR; + + dwc2_writel(hsotg, ctrl, DOEPCTL(ep->index)); + } + } + + while (dwc2_gadget_target_frame_elapsed(ep)) { + hs_req = get_ep_head(ep); + if (hs_req) { + hs_req->req.frame_number = ep->target_frame; + hs_req->req.actual = 0; + dwc2_hsotg_complete_request(hsotg, ep, hs_req, -ENODATA); + } + + dwc2_gadget_incr_frame_num(ep); + /* Update current frame number value. */ + hsotg->frame_number = dwc2_hsotg_read_frameno(hsotg); + } + + if (!ep->req) + dwc2_gadget_start_next_request(ep); + +} + +static void dwc2_hsotg_ep_stop_xfr(struct dwc2_hsotg *hsotg, + struct dwc2_hsotg_ep *hs_ep); + +/** + * dwc2_gadget_handle_nak - handle NAK interrupt + * @hs_ep: The endpoint on which interrupt is asserted. + * + * This is starting point for ISOC-IN transfer, synchronization done with + * first IN token received from host while corresponding EP is disabled. + * + * Device does not know when first one token will arrive from host. On first + * token arrival HW generates 2 interrupts: 'in token received while FIFO empty' + * and 'NAK'. NAK interrupt for ISOC-IN means that token has arrived and ZLP was + * sent in response to that as there was no data in FIFO. SW is basing on this + * interrupt to obtain frame in which token has come and then based on the + * interval calculates next frame for transfer. + */ +static void dwc2_gadget_handle_nak(struct dwc2_hsotg_ep *hs_ep) +{ + struct dwc2_hsotg *hsotg = hs_ep->parent; + struct dwc2_hsotg_req *hs_req; + int dir_in = hs_ep->dir_in; + u32 ctrl; + + if (!dir_in || !hs_ep->isochronous) + return; + + if (hs_ep->target_frame == TARGET_FRAME_INITIAL) { + + if (using_desc_dma(hsotg)) { + hs_ep->target_frame = hsotg->frame_number; + dwc2_gadget_incr_frame_num(hs_ep); + + /* In service interval mode target_frame must + * be set to last (u)frame of the service interval. + */ + if (hsotg->params.service_interval) { + /* Set target_frame to the first (u)frame of + * the service interval + */ + hs_ep->target_frame &= ~hs_ep->interval + 1; + + /* Set target_frame to the last (u)frame of + * the service interval + */ + dwc2_gadget_incr_frame_num(hs_ep); + dwc2_gadget_dec_frame_num_by_one(hs_ep); + } + + dwc2_gadget_start_isoc_ddma(hs_ep); + return; + } + + hs_ep->target_frame = hsotg->frame_number; + if (hs_ep->interval > 1) { + u32 ctrl = dwc2_readl(hsotg, + DIEPCTL(hs_ep->index)); + if (hs_ep->target_frame & 0x1) + ctrl |= DXEPCTL_SETODDFR; + else + ctrl |= DXEPCTL_SETEVENFR; + + dwc2_writel(hsotg, ctrl, DIEPCTL(hs_ep->index)); + } + } + + if (using_desc_dma(hsotg)) + return; + + ctrl = dwc2_readl(hsotg, DIEPCTL(hs_ep->index)); + if (ctrl & DXEPCTL_EPENA) + dwc2_hsotg_ep_stop_xfr(hsotg, hs_ep); + else + dwc2_hsotg_txfifo_flush(hsotg, hs_ep->fifo_index); + + while (dwc2_gadget_target_frame_elapsed(hs_ep)) { + hs_req = get_ep_head(hs_ep); + if (hs_req) { + hs_req->req.frame_number = hs_ep->target_frame; + hs_req->req.actual = 0; + dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, -ENODATA); + } + + dwc2_gadget_incr_frame_num(hs_ep); + /* Update current frame number value. */ + hsotg->frame_number = dwc2_hsotg_read_frameno(hsotg); + } + + if (!hs_ep->req) + dwc2_gadget_start_next_request(hs_ep); +} + +/** + * dwc2_hsotg_epint - handle an in/out endpoint interrupt + * @hsotg: The driver state + * @idx: The index for the endpoint (0..15) + * @dir_in: Set if this is an IN endpoint + * + * Process and clear any interrupt pending for an individual endpoint + */ +static void dwc2_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx, + int dir_in) +{ + struct dwc2_hsotg_ep *hs_ep = index_to_ep(hsotg, idx, dir_in); + u32 epint_reg = dir_in ? DIEPINT(idx) : DOEPINT(idx); + u32 epctl_reg = dir_in ? DIEPCTL(idx) : DOEPCTL(idx); + u32 epsiz_reg = dir_in ? DIEPTSIZ(idx) : DOEPTSIZ(idx); + u32 ints; + + ints = dwc2_gadget_read_ep_interrupts(hsotg, idx, dir_in); + + /* Clear endpoint interrupts */ + dwc2_writel(hsotg, ints, epint_reg); + + if (!hs_ep) { + dev_err(hsotg->dev, "%s:Interrupt for unconfigured ep%d(%s)\n", + __func__, idx, dir_in ? "in" : "out"); + return; + } + + dev_dbg(hsotg->dev, "%s: ep%d(%s) DxEPINT=0x%08x\n", + __func__, idx, dir_in ? "in" : "out", ints); + + /* Don't process XferCompl interrupt if it is a setup packet */ + if (idx == 0 && (ints & (DXEPINT_SETUP | DXEPINT_SETUP_RCVD))) + ints &= ~DXEPINT_XFERCOMPL; + + /* + * Don't process XferCompl interrupt in DDMA if EP0 is still in SETUP + * stage and xfercomplete was generated without SETUP phase done + * interrupt. SW should parse received setup packet only after host's + * exit from setup phase of control transfer. + */ + if (using_desc_dma(hsotg) && idx == 0 && !hs_ep->dir_in && + hsotg->ep0_state == DWC2_EP0_SETUP && !(ints & DXEPINT_SETUP)) + ints &= ~DXEPINT_XFERCOMPL; + + if (ints & DXEPINT_XFERCOMPL) { + dev_dbg(hsotg->dev, + "%s: XferCompl: DxEPCTL=0x%08x, DXEPTSIZ=%08x\n", + __func__, dwc2_readl(hsotg, epctl_reg), + dwc2_readl(hsotg, epsiz_reg)); + + /* In DDMA handle isochronous requests separately */ + if (using_desc_dma(hsotg) && hs_ep->isochronous) { + dwc2_gadget_complete_isoc_request_ddma(hs_ep); + } else if (dir_in) { + /* + * We get OutDone from the FIFO, so we only + * need to look at completing IN requests here + * if operating slave mode + */ + if (!hs_ep->isochronous || !(ints & DXEPINT_NAKINTRPT)) + dwc2_hsotg_complete_in(hsotg, hs_ep); + + if (idx == 0 && !hs_ep->req) + dwc2_hsotg_enqueue_setup(hsotg); + } else if (using_dma(hsotg)) { + /* + * We're using DMA, we need to fire an OutDone here + * as we ignore the RXFIFO. + */ + if (!hs_ep->isochronous || !(ints & DXEPINT_OUTTKNEPDIS)) + dwc2_hsotg_handle_outdone(hsotg, idx); + } + } + + if (ints & DXEPINT_EPDISBLD) + dwc2_gadget_handle_ep_disabled(hs_ep); + + if (ints & DXEPINT_OUTTKNEPDIS) + dwc2_gadget_handle_out_token_ep_disabled(hs_ep); + + if (ints & DXEPINT_NAKINTRPT) + dwc2_gadget_handle_nak(hs_ep); + + if (ints & DXEPINT_AHBERR) + dev_dbg(hsotg->dev, "%s: AHBErr\n", __func__); + + if (ints & DXEPINT_SETUP) { /* Setup or Timeout */ + dev_dbg(hsotg->dev, "%s: Setup/Timeout\n", __func__); + + if (using_dma(hsotg) && idx == 0) { + /* + * this is the notification we've received a + * setup packet. In non-DMA mode we'd get this + * from the RXFIFO, instead we need to process + * the setup here. + */ + + if (dir_in) + WARN_ON_ONCE(1); + else + dwc2_hsotg_handle_outdone(hsotg, 0); + } + } + + if (ints & DXEPINT_STSPHSERCVD) { + dev_dbg(hsotg->dev, "%s: StsPhseRcvd\n", __func__); + + /* Safety check EP0 state when STSPHSERCVD asserted */ + if (hsotg->ep0_state == DWC2_EP0_DATA_OUT) { + /* Move to STATUS IN for DDMA */ + if (using_desc_dma(hsotg)) { + if (!hsotg->delayed_status) + dwc2_hsotg_ep0_zlp(hsotg, true); + else + /* In case of 3 stage Control Write with delayed + * status, when Status IN transfer started + * before STSPHSERCVD asserted, NAKSTS bit not + * cleared by CNAK in dwc2_hsotg_start_req() + * function. Clear now NAKSTS to allow complete + * transfer. + */ + dwc2_set_bit(hsotg, DIEPCTL(0), + DXEPCTL_CNAK); + } + } + + } + + if (ints & DXEPINT_BACK2BACKSETUP) + dev_dbg(hsotg->dev, "%s: B2BSetup/INEPNakEff\n", __func__); + + if (ints & DXEPINT_BNAINTR) { + dev_dbg(hsotg->dev, "%s: BNA interrupt\n", __func__); + if (hs_ep->isochronous) + dwc2_gadget_handle_isoc_bna(hs_ep); + } + + if (dir_in && !hs_ep->isochronous) { + /* not sure if this is important, but we'll clear it anyway */ + if (ints & DXEPINT_INTKNTXFEMP) { + dev_dbg(hsotg->dev, "%s: ep%d: INTknTXFEmpMsk\n", + __func__, idx); + } + + /* this probably means something bad is happening */ + if (ints & DXEPINT_INTKNEPMIS) { + dev_warn(hsotg->dev, "%s: ep%d: INTknEP\n", + __func__, idx); + } + + /* FIFO has space or is empty (see GAHBCFG) */ + if (hsotg->dedicated_fifos && + ints & DXEPINT_TXFEMP) { + dev_dbg(hsotg->dev, "%s: ep%d: TxFIFOEmpty\n", + __func__, idx); + if (!using_dma(hsotg)) + dwc2_hsotg_trytx(hsotg, hs_ep); + } + } +} + +/** + * dwc2_hsotg_irq_enumdone - Handle EnumDone interrupt (enumeration done) + * @hsotg: The device state. + * + * Handle updating the device settings after the enumeration phase has + * been completed. + */ +static void dwc2_hsotg_irq_enumdone(struct dwc2_hsotg *hsotg) +{ + u32 dsts = dwc2_readl(hsotg, DSTS); + int ep0_mps = 0, ep_mps = 8; + + /* + * This should signal the finish of the enumeration phase + * of the USB handshaking, so we should now know what rate + * we connected at. + */ + + dev_dbg(hsotg->dev, "EnumDone (DSTS=0x%08x)\n", dsts); + + /* + * note, since we're limited by the size of transfer on EP0, and + * it seems IN transfers must be a even number of packets we do + * not advertise a 64byte MPS on EP0. + */ + + /* catch both EnumSpd_FS and EnumSpd_FS48 */ + switch ((dsts & DSTS_ENUMSPD_MASK) >> DSTS_ENUMSPD_SHIFT) { + case DSTS_ENUMSPD_FS: + case DSTS_ENUMSPD_FS48: + hsotg->gadget.speed = USB_SPEED_FULL; + ep0_mps = EP0_MPS_LIMIT; + ep_mps = 1023; + break; + + case DSTS_ENUMSPD_HS: + hsotg->gadget.speed = USB_SPEED_HIGH; + ep0_mps = EP0_MPS_LIMIT; + ep_mps = 1024; + break; + + case DSTS_ENUMSPD_LS: + hsotg->gadget.speed = USB_SPEED_LOW; + ep0_mps = 8; + ep_mps = 8; + /* + * note, we don't actually support LS in this driver at the + * moment, and the documentation seems to imply that it isn't + * supported by the PHYs on some of the devices. + */ + break; + } + dev_info(hsotg->dev, "new device is %s\n", + usb_speed_string(hsotg->gadget.speed)); + + /* + * we should now know the maximum packet size for an + * endpoint, so set the endpoints to a default value. + */ + + if (ep0_mps) { + int i; + /* Initialize ep0 for both in and out directions */ + dwc2_hsotg_set_ep_maxpacket(hsotg, 0, ep0_mps, 0, 1); + dwc2_hsotg_set_ep_maxpacket(hsotg, 0, ep0_mps, 0, 0); + for (i = 1; i < hsotg->num_of_eps; i++) { + if (hsotg->eps_in[i]) + dwc2_hsotg_set_ep_maxpacket(hsotg, i, ep_mps, + 0, 1); + if (hsotg->eps_out[i]) + dwc2_hsotg_set_ep_maxpacket(hsotg, i, ep_mps, + 0, 0); + } + } + + /* ensure after enumeration our EP0 is active */ + + dwc2_hsotg_enqueue_setup(hsotg); + + dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", + dwc2_readl(hsotg, DIEPCTL0), + dwc2_readl(hsotg, DOEPCTL0)); +} + +/** + * kill_all_requests - remove all requests from the endpoint's queue + * @hsotg: The device state. + * @ep: The endpoint the requests may be on. + * @result: The result code to use. + * + * Go through the requests on the given endpoint and mark them + * completed with the given result code. + */ +static void kill_all_requests(struct dwc2_hsotg *hsotg, + struct dwc2_hsotg_ep *ep, + int result) +{ + unsigned int size; + + ep->req = NULL; + + while (!list_empty(&ep->queue)) { + struct dwc2_hsotg_req *req = get_ep_head(ep); + + dwc2_hsotg_complete_request(hsotg, ep, req, result); + } + + if (!hsotg->dedicated_fifos) + return; + size = (dwc2_readl(hsotg, DTXFSTS(ep->fifo_index)) & 0xffff) * 4; + if (size < ep->fifo_size) + dwc2_hsotg_txfifo_flush(hsotg, ep->fifo_index); +} + +/** + * dwc2_hsotg_disconnect - disconnect service + * @hsotg: The device state. + * + * The device has been disconnected. Remove all current + * transactions and signal the gadget driver that this + * has happened. + */ +void dwc2_hsotg_disconnect(struct dwc2_hsotg *hsotg) +{ + unsigned int ep; + + if (!hsotg->connected) + return; + + hsotg->connected = 0; + hsotg->test_mode = 0; + + /* all endpoints should be shutdown */ + for (ep = 0; ep < hsotg->num_of_eps; ep++) { + if (hsotg->eps_in[ep]) + kill_all_requests(hsotg, hsotg->eps_in[ep], + -ESHUTDOWN); + if (hsotg->eps_out[ep]) + kill_all_requests(hsotg, hsotg->eps_out[ep], + -ESHUTDOWN); + } + + call_gadget(hsotg, disconnect); + hsotg->lx_state = DWC2_L3; + + usb_gadget_set_state(&hsotg->gadget, USB_STATE_NOTATTACHED); +} + +/** + * dwc2_hsotg_irq_fifoempty - TX FIFO empty interrupt handler + * @hsotg: The device state: + * @periodic: True if this is a periodic FIFO interrupt + */ +static void dwc2_hsotg_irq_fifoempty(struct dwc2_hsotg *hsotg, bool periodic) +{ + struct dwc2_hsotg_ep *ep; + int epno, ret; + + /* look through for any more data to transmit */ + for (epno = 0; epno < hsotg->num_of_eps; epno++) { + ep = index_to_ep(hsotg, epno, 1); + + if (!ep) + continue; + + if (!ep->dir_in) + continue; + + if ((periodic && !ep->periodic) || + (!periodic && ep->periodic)) + continue; + + ret = dwc2_hsotg_trytx(hsotg, ep); + if (ret < 0) + break; + } +} + +/* IRQ flags which will trigger a retry around the IRQ loop */ +#define IRQ_RETRY_MASK (GINTSTS_NPTXFEMP | \ + GINTSTS_PTXFEMP | \ + GINTSTS_RXFLVL) + +static int dwc2_hsotg_ep_disable(struct usb_ep *ep); +/** + * dwc2_hsotg_core_init_disconnected - issue softreset to the core + * @hsotg: The device state + * @is_usb_reset: Usb resetting flag + * + * Issue a soft reset to the core, and await the core finishing it. + */ +void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg, + bool is_usb_reset) +{ + u32 intmsk; + u32 val; + u32 usbcfg; + u32 dcfg = 0; + int ep; + + /* Kill any ep0 requests as controller will be reinitialized */ + kill_all_requests(hsotg, hsotg->eps_out[0], -ECONNRESET); + + if (!is_usb_reset) { + if (dwc2_core_reset(hsotg, true)) + return; + } else { + /* all endpoints should be shutdown */ + for (ep = 1; ep < hsotg->num_of_eps; ep++) { + if (hsotg->eps_in[ep]) + dwc2_hsotg_ep_disable(&hsotg->eps_in[ep]->ep); + if (hsotg->eps_out[ep]) + dwc2_hsotg_ep_disable(&hsotg->eps_out[ep]->ep); + } + } + + /* + * we must now enable ep0 ready for host detection and then + * set configuration. + */ + + /* keep other bits untouched (so e.g. forced modes are not lost) */ + usbcfg = dwc2_readl(hsotg, GUSBCFG); + usbcfg &= ~GUSBCFG_TOUTCAL_MASK; + usbcfg |= GUSBCFG_TOUTCAL(7); + + /* remove the HNP/SRP and set the PHY */ + usbcfg &= ~(GUSBCFG_SRPCAP | GUSBCFG_HNPCAP); + dwc2_writel(hsotg, usbcfg, GUSBCFG); + + dwc2_phy_init(hsotg, true); + + dwc2_hsotg_init_fifo(hsotg); + + if (!is_usb_reset) + dwc2_set_bit(hsotg, DCTL, DCTL_SFTDISCON); + + dcfg |= DCFG_EPMISCNT(1); + + switch (hsotg->params.speed) { + case DWC2_SPEED_PARAM_LOW: + dcfg |= DCFG_DEVSPD_LS; + break; + case DWC2_SPEED_PARAM_FULL: + if (hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS) + dcfg |= DCFG_DEVSPD_FS48; + else + dcfg |= DCFG_DEVSPD_FS; + break; + default: + dcfg |= DCFG_DEVSPD_HS; + } + + if (hsotg->params.ipg_isoc_en) + dcfg |= DCFG_IPG_ISOC_SUPPORDED; + + dwc2_writel(hsotg, dcfg, DCFG); + + /* Clear any pending OTG interrupts */ + dwc2_writel(hsotg, 0xffffffff, GOTGINT); + + /* Clear any pending interrupts */ + dwc2_writel(hsotg, 0xffffffff, GINTSTS); + intmsk = GINTSTS_ERLYSUSP | GINTSTS_SESSREQINT | + GINTSTS_GOUTNAKEFF | GINTSTS_GINNAKEFF | + GINTSTS_USBRST | GINTSTS_RESETDET | + GINTSTS_ENUMDONE | GINTSTS_OTGINT | + GINTSTS_USBSUSP | GINTSTS_WKUPINT | + GINTSTS_LPMTRANRCVD; + + if (!using_desc_dma(hsotg)) + intmsk |= GINTSTS_INCOMPL_SOIN | GINTSTS_INCOMPL_SOOUT; + + if (!hsotg->params.external_id_pin_ctl) + intmsk |= GINTSTS_CONIDSTSCHNG; + + dwc2_writel(hsotg, intmsk, GINTMSK); + + if (using_dma(hsotg)) { + dwc2_writel(hsotg, GAHBCFG_GLBL_INTR_EN | GAHBCFG_DMA_EN | + hsotg->params.ahbcfg, + GAHBCFG); + + /* Set DDMA mode support in the core if needed */ + if (using_desc_dma(hsotg)) + dwc2_set_bit(hsotg, DCFG, DCFG_DESCDMA_EN); + + } else { + dwc2_writel(hsotg, ((hsotg->dedicated_fifos) ? + (GAHBCFG_NP_TXF_EMP_LVL | + GAHBCFG_P_TXF_EMP_LVL) : 0) | + GAHBCFG_GLBL_INTR_EN, GAHBCFG); + } + + /* + * If INTknTXFEmpMsk is enabled, it's important to disable ep interrupts + * when we have no data to transfer. Otherwise we get being flooded by + * interrupts. + */ + + dwc2_writel(hsotg, ((hsotg->dedicated_fifos && !using_dma(hsotg)) ? + DIEPMSK_TXFIFOEMPTY | DIEPMSK_INTKNTXFEMPMSK : 0) | + DIEPMSK_EPDISBLDMSK | DIEPMSK_XFERCOMPLMSK | + DIEPMSK_TIMEOUTMSK | DIEPMSK_AHBERRMSK, + DIEPMSK); + + /* + * don't need XferCompl, we get that from RXFIFO in slave mode. In + * DMA mode we may need this and StsPhseRcvd. + */ + dwc2_writel(hsotg, (using_dma(hsotg) ? (DIEPMSK_XFERCOMPLMSK | + DOEPMSK_STSPHSERCVDMSK) : 0) | + DOEPMSK_EPDISBLDMSK | DOEPMSK_AHBERRMSK | + DOEPMSK_SETUPMSK, + DOEPMSK); + + /* Enable BNA interrupt for DDMA */ + if (using_desc_dma(hsotg)) { + dwc2_set_bit(hsotg, DOEPMSK, DOEPMSK_BNAMSK); + dwc2_set_bit(hsotg, DIEPMSK, DIEPMSK_BNAININTRMSK); + } + + /* Enable Service Interval mode if supported */ + if (using_desc_dma(hsotg) && hsotg->params.service_interval) + dwc2_set_bit(hsotg, DCTL, DCTL_SERVICE_INTERVAL_SUPPORTED); + + dwc2_writel(hsotg, 0, DAINTMSK); + + dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", + dwc2_readl(hsotg, DIEPCTL0), + dwc2_readl(hsotg, DOEPCTL0)); + + /* enable in and out endpoint interrupts */ + dwc2_hsotg_en_gsint(hsotg, GINTSTS_OEPINT | GINTSTS_IEPINT); + + /* + * Enable the RXFIFO when in slave mode, as this is how we collect + * the data. In DMA mode, we get events from the FIFO but also + * things we cannot process, so do not use it. + */ + if (!using_dma(hsotg)) + dwc2_hsotg_en_gsint(hsotg, GINTSTS_RXFLVL); + + /* Enable interrupts for EP0 in and out */ + dwc2_hsotg_ctrl_epint(hsotg, 0, 0, 1); + dwc2_hsotg_ctrl_epint(hsotg, 0, 1, 1); + + if (!is_usb_reset) { + dwc2_set_bit(hsotg, DCTL, DCTL_PWRONPRGDONE); + udelay(10); /* see openiboot */ + dwc2_clear_bit(hsotg, DCTL, DCTL_PWRONPRGDONE); + } + + dev_dbg(hsotg->dev, "DCTL=0x%08x\n", dwc2_readl(hsotg, DCTL)); + + /* + * DxEPCTL_USBActEp says RO in manual, but seems to be set by + * writing to the EPCTL register.. + */ + + /* set to read 1 8byte packet */ + dwc2_writel(hsotg, DXEPTSIZ_MC(1) | DXEPTSIZ_PKTCNT(1) | + DXEPTSIZ_XFERSIZE(8), DOEPTSIZ0); + + dwc2_writel(hsotg, dwc2_hsotg_ep0_mps(hsotg->eps_out[0]->ep.maxpacket) | + DXEPCTL_CNAK | DXEPCTL_EPENA | + DXEPCTL_USBACTEP, + DOEPCTL0); + + /* enable, but don't activate EP0in */ + dwc2_writel(hsotg, dwc2_hsotg_ep0_mps(hsotg->eps_out[0]->ep.maxpacket) | + DXEPCTL_USBACTEP, DIEPCTL0); + + /* clear global NAKs */ + val = DCTL_CGOUTNAK | DCTL_CGNPINNAK; + if (!is_usb_reset) + val |= DCTL_SFTDISCON; + dwc2_set_bit(hsotg, DCTL, val); + + /* configure the core to support LPM */ + dwc2_gadget_init_lpm(hsotg); + + /* program GREFCLK register if needed */ + if (using_desc_dma(hsotg) && hsotg->params.service_interval) + dwc2_gadget_program_ref_clk(hsotg); + + /* must be at-least 3ms to allow bus to see disconnect */ + mdelay(3); + + hsotg->lx_state = DWC2_L0; + + dwc2_hsotg_enqueue_setup(hsotg); + + dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", + dwc2_readl(hsotg, DIEPCTL0), + dwc2_readl(hsotg, DOEPCTL0)); +} + +void dwc2_hsotg_core_disconnect(struct dwc2_hsotg *hsotg) +{ + /* set the soft-disconnect bit */ + dwc2_set_bit(hsotg, DCTL, DCTL_SFTDISCON); +} + +void dwc2_hsotg_core_connect(struct dwc2_hsotg *hsotg) +{ + /* remove the soft-disconnect and let's go */ + if (!hsotg->role_sw || (dwc2_readl(hsotg, GOTGCTL) & GOTGCTL_BSESVLD)) + dwc2_clear_bit(hsotg, DCTL, DCTL_SFTDISCON); +} + +/** + * dwc2_gadget_handle_incomplete_isoc_in - handle incomplete ISO IN Interrupt. + * @hsotg: The device state: + * + * This interrupt indicates one of the following conditions occurred while + * transmitting an ISOC transaction. + * - Corrupted IN Token for ISOC EP. + * - Packet not complete in FIFO. + * + * The following actions will be taken: + * - Determine the EP + * - Disable EP; when 'Endpoint Disabled' interrupt is received Flush FIFO + */ +static void dwc2_gadget_handle_incomplete_isoc_in(struct dwc2_hsotg *hsotg) +{ + struct dwc2_hsotg_ep *hs_ep; + u32 epctrl; + u32 daintmsk; + u32 idx; + + dev_dbg(hsotg->dev, "Incomplete isoc in interrupt received:\n"); + + daintmsk = dwc2_readl(hsotg, DAINTMSK); + + for (idx = 1; idx < hsotg->num_of_eps; idx++) { + hs_ep = hsotg->eps_in[idx]; + /* Proceed only unmasked ISOC EPs */ + if ((BIT(idx) & ~daintmsk) || !hs_ep->isochronous) + continue; + + epctrl = dwc2_readl(hsotg, DIEPCTL(idx)); + if ((epctrl & DXEPCTL_EPENA) && + dwc2_gadget_target_frame_elapsed(hs_ep)) { + epctrl |= DXEPCTL_SNAK; + epctrl |= DXEPCTL_EPDIS; + dwc2_writel(hsotg, epctrl, DIEPCTL(idx)); + } + } + + /* Clear interrupt */ + dwc2_writel(hsotg, GINTSTS_INCOMPL_SOIN, GINTSTS); +} + +/** + * dwc2_gadget_handle_incomplete_isoc_out - handle incomplete ISO OUT Interrupt + * @hsotg: The device state: + * + * This interrupt indicates one of the following conditions occurred while + * transmitting an ISOC transaction. + * - Corrupted OUT Token for ISOC EP. + * - Packet not complete in FIFO. + * + * The following actions will be taken: + * - Determine the EP + * - Set DCTL_SGOUTNAK and unmask GOUTNAKEFF if target frame elapsed. + */ +static void dwc2_gadget_handle_incomplete_isoc_out(struct dwc2_hsotg *hsotg) +{ + u32 gintsts; + u32 gintmsk; + u32 daintmsk; + u32 epctrl; + struct dwc2_hsotg_ep *hs_ep; + int idx; + + dev_dbg(hsotg->dev, "%s: GINTSTS_INCOMPL_SOOUT\n", __func__); + + daintmsk = dwc2_readl(hsotg, DAINTMSK); + daintmsk >>= DAINT_OUTEP_SHIFT; + + for (idx = 1; idx < hsotg->num_of_eps; idx++) { + hs_ep = hsotg->eps_out[idx]; + /* Proceed only unmasked ISOC EPs */ + if ((BIT(idx) & ~daintmsk) || !hs_ep->isochronous) + continue; + + epctrl = dwc2_readl(hsotg, DOEPCTL(idx)); + if ((epctrl & DXEPCTL_EPENA) && + dwc2_gadget_target_frame_elapsed(hs_ep)) { + /* Unmask GOUTNAKEFF interrupt */ + gintmsk = dwc2_readl(hsotg, GINTMSK); + gintmsk |= GINTSTS_GOUTNAKEFF; + dwc2_writel(hsotg, gintmsk, GINTMSK); + + gintsts = dwc2_readl(hsotg, GINTSTS); + if (!(gintsts & GINTSTS_GOUTNAKEFF)) { + dwc2_set_bit(hsotg, DCTL, DCTL_SGOUTNAK); + break; + } + } + } + + /* Clear interrupt */ + dwc2_writel(hsotg, GINTSTS_INCOMPL_SOOUT, GINTSTS); +} + +/** + * dwc2_hsotg_irq - handle device interrupt + * @irq: The IRQ number triggered + * @pw: The pw value when registered the handler. + */ +static irqreturn_t dwc2_hsotg_irq(int irq, void *pw) +{ + struct dwc2_hsotg *hsotg = pw; + int retry_count = 8; + u32 gintsts; + u32 gintmsk; + + if (!dwc2_is_device_mode(hsotg)) + return IRQ_NONE; + + spin_lock(&hsotg->lock); +irq_retry: + gintsts = dwc2_readl(hsotg, GINTSTS); + gintmsk = dwc2_readl(hsotg, GINTMSK); + + dev_dbg(hsotg->dev, "%s: %08x %08x (%08x) retry %d\n", + __func__, gintsts, gintsts & gintmsk, gintmsk, retry_count); + + gintsts &= gintmsk; + + if (gintsts & GINTSTS_RESETDET) { + dev_dbg(hsotg->dev, "%s: USBRstDet\n", __func__); + + dwc2_writel(hsotg, GINTSTS_RESETDET, GINTSTS); + + /* This event must be used only if controller is suspended */ + if (hsotg->in_ppd && hsotg->lx_state == DWC2_L2) + dwc2_exit_partial_power_down(hsotg, 0, true); + + hsotg->lx_state = DWC2_L0; + } + + if (gintsts & (GINTSTS_USBRST | GINTSTS_RESETDET)) { + u32 usb_status = dwc2_readl(hsotg, GOTGCTL); + u32 connected = hsotg->connected; + + dev_dbg(hsotg->dev, "%s: USBRst\n", __func__); + dev_dbg(hsotg->dev, "GNPTXSTS=%08x\n", + dwc2_readl(hsotg, GNPTXSTS)); + + dwc2_writel(hsotg, GINTSTS_USBRST, GINTSTS); + + /* Report disconnection if it is not already done. */ + dwc2_hsotg_disconnect(hsotg); + + /* Reset device address to zero */ + dwc2_clear_bit(hsotg, DCFG, DCFG_DEVADDR_MASK); + + if (usb_status & GOTGCTL_BSESVLD && connected) + dwc2_hsotg_core_init_disconnected(hsotg, true); + } + + if (gintsts & GINTSTS_ENUMDONE) { + dwc2_writel(hsotg, GINTSTS_ENUMDONE, GINTSTS); + + dwc2_hsotg_irq_enumdone(hsotg); + } + + if (gintsts & (GINTSTS_OEPINT | GINTSTS_IEPINT)) { + u32 daint = dwc2_readl(hsotg, DAINT); + u32 daintmsk = dwc2_readl(hsotg, DAINTMSK); + u32 daint_out, daint_in; + int ep; + + daint &= daintmsk; + daint_out = daint >> DAINT_OUTEP_SHIFT; + daint_in = daint & ~(daint_out << DAINT_OUTEP_SHIFT); + + dev_dbg(hsotg->dev, "%s: daint=%08x\n", __func__, daint); + + for (ep = 0; ep < hsotg->num_of_eps && daint_out; + ep++, daint_out >>= 1) { + if (daint_out & 1) + dwc2_hsotg_epint(hsotg, ep, 0); + } + + for (ep = 0; ep < hsotg->num_of_eps && daint_in; + ep++, daint_in >>= 1) { + if (daint_in & 1) + dwc2_hsotg_epint(hsotg, ep, 1); + } + } + + /* check both FIFOs */ + + if (gintsts & GINTSTS_NPTXFEMP) { + dev_dbg(hsotg->dev, "NPTxFEmp\n"); + + /* + * Disable the interrupt to stop it happening again + * unless one of these endpoint routines decides that + * it needs re-enabling + */ + + dwc2_hsotg_disable_gsint(hsotg, GINTSTS_NPTXFEMP); + dwc2_hsotg_irq_fifoempty(hsotg, false); + } + + if (gintsts & GINTSTS_PTXFEMP) { + dev_dbg(hsotg->dev, "PTxFEmp\n"); + + /* See note in GINTSTS_NPTxFEmp */ + + dwc2_hsotg_disable_gsint(hsotg, GINTSTS_PTXFEMP); + dwc2_hsotg_irq_fifoempty(hsotg, true); + } + + if (gintsts & GINTSTS_RXFLVL) { + /* + * note, since GINTSTS_RxFLvl doubles as FIFO-not-empty, + * we need to retry dwc2_hsotg_handle_rx if this is still + * set. + */ + + dwc2_hsotg_handle_rx(hsotg); + } + + if (gintsts & GINTSTS_ERLYSUSP) { + dev_dbg(hsotg->dev, "GINTSTS_ErlySusp\n"); + dwc2_writel(hsotg, GINTSTS_ERLYSUSP, GINTSTS); + } + + /* + * these next two seem to crop-up occasionally causing the core + * to shutdown the USB transfer, so try clearing them and logging + * the occurrence. + */ + + if (gintsts & GINTSTS_GOUTNAKEFF) { + u8 idx; + u32 epctrl; + u32 gintmsk; + u32 daintmsk; + struct dwc2_hsotg_ep *hs_ep; + + daintmsk = dwc2_readl(hsotg, DAINTMSK); + daintmsk >>= DAINT_OUTEP_SHIFT; + /* Mask this interrupt */ + gintmsk = dwc2_readl(hsotg, GINTMSK); + gintmsk &= ~GINTSTS_GOUTNAKEFF; + dwc2_writel(hsotg, gintmsk, GINTMSK); + + dev_dbg(hsotg->dev, "GOUTNakEff triggered\n"); + for (idx = 1; idx < hsotg->num_of_eps; idx++) { + hs_ep = hsotg->eps_out[idx]; + /* Proceed only unmasked ISOC EPs */ + if (BIT(idx) & ~daintmsk) + continue; + + epctrl = dwc2_readl(hsotg, DOEPCTL(idx)); + + //ISOC Ep's only + if ((epctrl & DXEPCTL_EPENA) && hs_ep->isochronous) { + epctrl |= DXEPCTL_SNAK; + epctrl |= DXEPCTL_EPDIS; + dwc2_writel(hsotg, epctrl, DOEPCTL(idx)); + continue; + } + + //Non-ISOC EP's + if (hs_ep->halted) { + if (!(epctrl & DXEPCTL_EPENA)) + epctrl |= DXEPCTL_EPENA; + epctrl |= DXEPCTL_EPDIS; + epctrl |= DXEPCTL_STALL; + dwc2_writel(hsotg, epctrl, DOEPCTL(idx)); + } + } + + /* This interrupt bit is cleared in DXEPINT_EPDISBLD handler */ + } + + if (gintsts & GINTSTS_GINNAKEFF) { + dev_info(hsotg->dev, "GINNakEff triggered\n"); + + dwc2_set_bit(hsotg, DCTL, DCTL_CGNPINNAK); + + dwc2_hsotg_dump(hsotg); + } + + if (gintsts & GINTSTS_INCOMPL_SOIN) + dwc2_gadget_handle_incomplete_isoc_in(hsotg); + + if (gintsts & GINTSTS_INCOMPL_SOOUT) + dwc2_gadget_handle_incomplete_isoc_out(hsotg); + + /* + * if we've had fifo events, we should try and go around the + * loop again to see if there's any point in returning yet. + */ + + if (gintsts & IRQ_RETRY_MASK && --retry_count > 0) + goto irq_retry; + + /* Check WKUP_ALERT interrupt*/ + if (hsotg->params.service_interval) + dwc2_gadget_wkup_alert_handler(hsotg); + + spin_unlock(&hsotg->lock); + + return IRQ_HANDLED; +} + +static void dwc2_hsotg_ep_stop_xfr(struct dwc2_hsotg *hsotg, + struct dwc2_hsotg_ep *hs_ep) +{ + u32 epctrl_reg; + u32 epint_reg; + + epctrl_reg = hs_ep->dir_in ? DIEPCTL(hs_ep->index) : + DOEPCTL(hs_ep->index); + epint_reg = hs_ep->dir_in ? DIEPINT(hs_ep->index) : + DOEPINT(hs_ep->index); + + dev_dbg(hsotg->dev, "%s: stopping transfer on %s\n", __func__, + hs_ep->name); + + if (hs_ep->dir_in) { + if (hsotg->dedicated_fifos || hs_ep->periodic) { + dwc2_set_bit(hsotg, epctrl_reg, DXEPCTL_SNAK); + /* Wait for Nak effect */ + if (dwc2_hsotg_wait_bit_set(hsotg, epint_reg, + DXEPINT_INEPNAKEFF, 100)) + dev_warn(hsotg->dev, + "%s: timeout DIEPINT.NAKEFF\n", + __func__); + } else { + dwc2_set_bit(hsotg, DCTL, DCTL_SGNPINNAK); + /* Wait for Nak effect */ + if (dwc2_hsotg_wait_bit_set(hsotg, GINTSTS, + GINTSTS_GINNAKEFF, 100)) + dev_warn(hsotg->dev, + "%s: timeout GINTSTS.GINNAKEFF\n", + __func__); + } + } else { + /* Mask GINTSTS_GOUTNAKEFF interrupt */ + dwc2_hsotg_disable_gsint(hsotg, GINTSTS_GOUTNAKEFF); + + if (!(dwc2_readl(hsotg, GINTSTS) & GINTSTS_GOUTNAKEFF)) + dwc2_set_bit(hsotg, DCTL, DCTL_SGOUTNAK); + + if (!using_dma(hsotg)) { + /* Wait for GINTSTS_RXFLVL interrupt */ + if (dwc2_hsotg_wait_bit_set(hsotg, GINTSTS, + GINTSTS_RXFLVL, 100)) { + dev_warn(hsotg->dev, "%s: timeout GINTSTS.RXFLVL\n", + __func__); + } else { + /* + * Pop GLOBAL OUT NAK status packet from RxFIFO + * to assert GOUTNAKEFF interrupt + */ + dwc2_readl(hsotg, GRXSTSP); + } + } + + /* Wait for global nak to take effect */ + if (dwc2_hsotg_wait_bit_set(hsotg, GINTSTS, + GINTSTS_GOUTNAKEFF, 100)) + dev_warn(hsotg->dev, "%s: timeout GINTSTS.GOUTNAKEFF\n", + __func__); + } + + /* Disable ep */ + dwc2_set_bit(hsotg, epctrl_reg, DXEPCTL_EPDIS | DXEPCTL_SNAK); + + /* Wait for ep to be disabled */ + if (dwc2_hsotg_wait_bit_set(hsotg, epint_reg, DXEPINT_EPDISBLD, 100)) + dev_warn(hsotg->dev, + "%s: timeout DOEPCTL.EPDisable\n", __func__); + + /* Clear EPDISBLD interrupt */ + dwc2_set_bit(hsotg, epint_reg, DXEPINT_EPDISBLD); + + if (hs_ep->dir_in) { + unsigned short fifo_index; + + if (hsotg->dedicated_fifos || hs_ep->periodic) + fifo_index = hs_ep->fifo_index; + else + fifo_index = 0; + + /* Flush TX FIFO */ + dwc2_flush_tx_fifo(hsotg, fifo_index); + + /* Clear Global In NP NAK in Shared FIFO for non periodic ep */ + if (!hsotg->dedicated_fifos && !hs_ep->periodic) + dwc2_set_bit(hsotg, DCTL, DCTL_CGNPINNAK); + + } else { + /* Remove global NAKs */ + dwc2_set_bit(hsotg, DCTL, DCTL_CGOUTNAK); + } +} + +/** + * dwc2_hsotg_ep_enable - enable the given endpoint + * @ep: The USB endpint to configure + * @desc: The USB endpoint descriptor to configure with. + * + * This is called from the USB gadget code's usb_ep_enable(). + */ +static int dwc2_hsotg_ep_enable(struct usb_ep *ep, + const struct usb_endpoint_descriptor *desc) +{ + struct dwc2_hsotg_ep *hs_ep = our_ep(ep); + struct dwc2_hsotg *hsotg = hs_ep->parent; + unsigned long flags; + unsigned int index = hs_ep->index; + u32 epctrl_reg; + u32 epctrl; + u32 mps; + u32 mc; + u32 mask; + unsigned int dir_in; + unsigned int i, val, size; + int ret = 0; + unsigned char ep_type; + int desc_num; + + dev_dbg(hsotg->dev, + "%s: ep %s: a 0x%02x, attr 0x%02x, mps 0x%04x, intr %d\n", + __func__, ep->name, desc->bEndpointAddress, desc->bmAttributes, + desc->wMaxPacketSize, desc->bInterval); + + /* not to be called for EP0 */ + if (index == 0) { + dev_err(hsotg->dev, "%s: called for EP 0\n", __func__); + return -EINVAL; + } + + dir_in = (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? 1 : 0; + if (dir_in != hs_ep->dir_in) { + dev_err(hsotg->dev, "%s: direction mismatch!\n", __func__); + return -EINVAL; + } + + ep_type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + mps = usb_endpoint_maxp(desc); + mc = usb_endpoint_maxp_mult(desc); + + /* ISOC IN in DDMA supported bInterval up to 10 */ + if (using_desc_dma(hsotg) && ep_type == USB_ENDPOINT_XFER_ISOC && + dir_in && desc->bInterval > 10) { + dev_err(hsotg->dev, + "%s: ISOC IN, DDMA: bInterval>10 not supported!\n", __func__); + return -EINVAL; + } + + /* High bandwidth ISOC OUT in DDMA not supported */ + if (using_desc_dma(hsotg) && ep_type == USB_ENDPOINT_XFER_ISOC && + !dir_in && mc > 1) { + dev_err(hsotg->dev, + "%s: ISOC OUT, DDMA: HB not supported!\n", __func__); + return -EINVAL; + } + + /* note, we handle this here instead of dwc2_hsotg_set_ep_maxpacket */ + + epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index); + epctrl = dwc2_readl(hsotg, epctrl_reg); + + dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x from 0x%08x\n", + __func__, epctrl, epctrl_reg); + + if (using_desc_dma(hsotg) && ep_type == USB_ENDPOINT_XFER_ISOC) + desc_num = MAX_DMA_DESC_NUM_HS_ISOC; + else + desc_num = MAX_DMA_DESC_NUM_GENERIC; + + /* Allocate DMA descriptor chain for non-ctrl endpoints */ + if (using_desc_dma(hsotg) && !hs_ep->desc_list) { + hs_ep->desc_list = dmam_alloc_coherent(hsotg->dev, + desc_num * sizeof(struct dwc2_dma_desc), + &hs_ep->desc_list_dma, GFP_ATOMIC); + if (!hs_ep->desc_list) { + ret = -ENOMEM; + goto error2; + } + } + + spin_lock_irqsave(&hsotg->lock, flags); + + epctrl &= ~(DXEPCTL_EPTYPE_MASK | DXEPCTL_MPS_MASK); + epctrl |= DXEPCTL_MPS(mps); + + /* + * mark the endpoint as active, otherwise the core may ignore + * transactions entirely for this endpoint + */ + epctrl |= DXEPCTL_USBACTEP; + + /* update the endpoint state */ + dwc2_hsotg_set_ep_maxpacket(hsotg, hs_ep->index, mps, mc, dir_in); + + /* default, set to non-periodic */ + hs_ep->isochronous = 0; + hs_ep->periodic = 0; + hs_ep->halted = 0; + hs_ep->wedged = 0; + hs_ep->interval = desc->bInterval; + + switch (ep_type) { + case USB_ENDPOINT_XFER_ISOC: + epctrl |= DXEPCTL_EPTYPE_ISO; + epctrl |= DXEPCTL_SETEVENFR; + hs_ep->isochronous = 1; + hs_ep->interval = 1 << (desc->bInterval - 1); + hs_ep->target_frame = TARGET_FRAME_INITIAL; + hs_ep->next_desc = 0; + hs_ep->compl_desc = 0; + if (dir_in) { + hs_ep->periodic = 1; + mask = dwc2_readl(hsotg, DIEPMSK); + mask |= DIEPMSK_NAKMSK; + dwc2_writel(hsotg, mask, DIEPMSK); + } else { + epctrl |= DXEPCTL_SNAK; + mask = dwc2_readl(hsotg, DOEPMSK); + mask |= DOEPMSK_OUTTKNEPDISMSK; + dwc2_writel(hsotg, mask, DOEPMSK); + } + break; + + case USB_ENDPOINT_XFER_BULK: + epctrl |= DXEPCTL_EPTYPE_BULK; + break; + + case USB_ENDPOINT_XFER_INT: + if (dir_in) + hs_ep->periodic = 1; + + if (hsotg->gadget.speed == USB_SPEED_HIGH) + hs_ep->interval = 1 << (desc->bInterval - 1); + + epctrl |= DXEPCTL_EPTYPE_INTERRUPT; + break; + + case USB_ENDPOINT_XFER_CONTROL: + epctrl |= DXEPCTL_EPTYPE_CONTROL; + break; + } + + /* + * if the hardware has dedicated fifos, we must give each IN EP + * a unique tx-fifo even if it is non-periodic. + */ + if (dir_in && hsotg->dedicated_fifos) { + unsigned fifo_count = dwc2_hsotg_tx_fifo_count(hsotg); + u32 fifo_index = 0; + u32 fifo_size = UINT_MAX; + + size = hs_ep->ep.maxpacket * hs_ep->mc; + for (i = 1; i <= fifo_count; ++i) { + if (hsotg->fifo_map & (1 << i)) + continue; + val = dwc2_readl(hsotg, DPTXFSIZN(i)); + val = (val >> FIFOSIZE_DEPTH_SHIFT) * 4; + if (val < size) + continue; + /* Search for smallest acceptable fifo */ + if (val < fifo_size) { + fifo_size = val; + fifo_index = i; + } + } + if (!fifo_index) { + dev_err(hsotg->dev, + "%s: No suitable fifo found\n", __func__); + ret = -ENOMEM; + goto error1; + } + epctrl &= ~(DXEPCTL_TXFNUM_LIMIT << DXEPCTL_TXFNUM_SHIFT); + hsotg->fifo_map |= 1 << fifo_index; + epctrl |= DXEPCTL_TXFNUM(fifo_index); + hs_ep->fifo_index = fifo_index; + hs_ep->fifo_size = fifo_size; + } + + /* for non control endpoints, set PID to D0 */ + if (index && !hs_ep->isochronous) + epctrl |= DXEPCTL_SETD0PID; + + /* WA for Full speed ISOC IN in DDMA mode. + * By Clear NAK status of EP, core will send ZLP + * to IN token and assert NAK interrupt relying + * on TxFIFO status only + */ + + if (hsotg->gadget.speed == USB_SPEED_FULL && + hs_ep->isochronous && dir_in) { + /* The WA applies only to core versions from 2.72a + * to 4.00a (including both). Also for FS_IOT_1.00a + * and HS_IOT_1.00a. + */ + u32 gsnpsid = dwc2_readl(hsotg, GSNPSID); + + if ((gsnpsid >= DWC2_CORE_REV_2_72a && + gsnpsid <= DWC2_CORE_REV_4_00a) || + gsnpsid == DWC2_FS_IOT_REV_1_00a || + gsnpsid == DWC2_HS_IOT_REV_1_00a) + epctrl |= DXEPCTL_CNAK; + } + + dev_dbg(hsotg->dev, "%s: write DxEPCTL=0x%08x\n", + __func__, epctrl); + + dwc2_writel(hsotg, epctrl, epctrl_reg); + dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x\n", + __func__, dwc2_readl(hsotg, epctrl_reg)); + + /* enable the endpoint interrupt */ + dwc2_hsotg_ctrl_epint(hsotg, index, dir_in, 1); + +error1: + spin_unlock_irqrestore(&hsotg->lock, flags); + +error2: + if (ret && using_desc_dma(hsotg) && hs_ep->desc_list) { + dmam_free_coherent(hsotg->dev, desc_num * + sizeof(struct dwc2_dma_desc), + hs_ep->desc_list, hs_ep->desc_list_dma); + hs_ep->desc_list = NULL; + } + + return ret; +} + +/** + * dwc2_hsotg_ep_disable - disable given endpoint + * @ep: The endpoint to disable. + */ +static int dwc2_hsotg_ep_disable(struct usb_ep *ep) +{ + struct dwc2_hsotg_ep *hs_ep = our_ep(ep); + struct dwc2_hsotg *hsotg = hs_ep->parent; + int dir_in = hs_ep->dir_in; + int index = hs_ep->index; + u32 epctrl_reg; + u32 ctrl; + + dev_dbg(hsotg->dev, "%s(ep %p)\n", __func__, ep); + + if (ep == &hsotg->eps_out[0]->ep) { + dev_err(hsotg->dev, "%s: called for ep0\n", __func__); + return -EINVAL; + } + + if (hsotg->op_state != OTG_STATE_B_PERIPHERAL) { + dev_err(hsotg->dev, "%s: called in host mode?\n", __func__); + return -EINVAL; + } + + epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index); + + ctrl = dwc2_readl(hsotg, epctrl_reg); + + if (ctrl & DXEPCTL_EPENA) + dwc2_hsotg_ep_stop_xfr(hsotg, hs_ep); + + ctrl &= ~DXEPCTL_EPENA; + ctrl &= ~DXEPCTL_USBACTEP; + ctrl |= DXEPCTL_SNAK; + + dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl); + dwc2_writel(hsotg, ctrl, epctrl_reg); + + /* disable endpoint interrupts */ + dwc2_hsotg_ctrl_epint(hsotg, hs_ep->index, hs_ep->dir_in, 0); + + /* terminate all requests with shutdown */ + kill_all_requests(hsotg, hs_ep, -ESHUTDOWN); + + hsotg->fifo_map &= ~(1 << hs_ep->fifo_index); + hs_ep->fifo_index = 0; + hs_ep->fifo_size = 0; + + return 0; +} + +static int dwc2_hsotg_ep_disable_lock(struct usb_ep *ep) +{ + struct dwc2_hsotg_ep *hs_ep = our_ep(ep); + struct dwc2_hsotg *hsotg = hs_ep->parent; + unsigned long flags; + int ret; + + spin_lock_irqsave(&hsotg->lock, flags); + ret = dwc2_hsotg_ep_disable(ep); + spin_unlock_irqrestore(&hsotg->lock, flags); + return ret; +} + +/** + * on_list - check request is on the given endpoint + * @ep: The endpoint to check. + * @test: The request to test if it is on the endpoint. + */ +static bool on_list(struct dwc2_hsotg_ep *ep, struct dwc2_hsotg_req *test) +{ + struct dwc2_hsotg_req *req, *treq; + + list_for_each_entry_safe(req, treq, &ep->queue, queue) { + if (req == test) + return true; + } + + return false; +} + +/** + * dwc2_hsotg_ep_dequeue - dequeue given endpoint + * @ep: The endpoint to dequeue. + * @req: The request to be removed from a queue. + */ +static int dwc2_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req) +{ + struct dwc2_hsotg_req *hs_req = our_req(req); + struct dwc2_hsotg_ep *hs_ep = our_ep(ep); + struct dwc2_hsotg *hs = hs_ep->parent; + unsigned long flags; + + dev_dbg(hs->dev, "ep_dequeue(%p,%p)\n", ep, req); + + spin_lock_irqsave(&hs->lock, flags); + + if (!on_list(hs_ep, hs_req)) { + spin_unlock_irqrestore(&hs->lock, flags); + return -EINVAL; + } + + /* Dequeue already started request */ + if (req == &hs_ep->req->req) + dwc2_hsotg_ep_stop_xfr(hs, hs_ep); + + dwc2_hsotg_complete_request(hs, hs_ep, hs_req, -ECONNRESET); + spin_unlock_irqrestore(&hs->lock, flags); + + return 0; +} + +/** + * dwc2_gadget_ep_set_wedge - set wedge on a given endpoint + * @ep: The endpoint to be wedged. + * + */ +static int dwc2_gadget_ep_set_wedge(struct usb_ep *ep) +{ + struct dwc2_hsotg_ep *hs_ep = our_ep(ep); + struct dwc2_hsotg *hs = hs_ep->parent; + + unsigned long flags; + int ret; + + spin_lock_irqsave(&hs->lock, flags); + hs_ep->wedged = 1; + ret = dwc2_hsotg_ep_sethalt(ep, 1, false); + spin_unlock_irqrestore(&hs->lock, flags); + + return ret; +} + +/** + * dwc2_hsotg_ep_sethalt - set halt on a given endpoint + * @ep: The endpoint to set halt. + * @value: Set or unset the halt. + * @now: If true, stall the endpoint now. Otherwise return -EAGAIN if + * the endpoint is busy processing requests. + * + * We need to stall the endpoint immediately if request comes from set_feature + * protocol command handler. + */ +static int dwc2_hsotg_ep_sethalt(struct usb_ep *ep, int value, bool now) +{ + struct dwc2_hsotg_ep *hs_ep = our_ep(ep); + struct dwc2_hsotg *hs = hs_ep->parent; + int index = hs_ep->index; + u32 epreg; + u32 epctl; + u32 xfertype; + + dev_info(hs->dev, "%s(ep %p %s, %d)\n", __func__, ep, ep->name, value); + + if (index == 0) { + if (value) + dwc2_hsotg_stall_ep0(hs); + else + dev_warn(hs->dev, + "%s: can't clear halt on ep0\n", __func__); + return 0; + } + + if (hs_ep->isochronous) { + dev_err(hs->dev, "%s is Isochronous Endpoint\n", ep->name); + return -EINVAL; + } + + if (!now && value && !list_empty(&hs_ep->queue)) { + dev_dbg(hs->dev, "%s request is pending, cannot halt\n", + ep->name); + return -EAGAIN; + } + + if (hs_ep->dir_in) { + epreg = DIEPCTL(index); + epctl = dwc2_readl(hs, epreg); + + if (value) { + epctl |= DXEPCTL_STALL | DXEPCTL_SNAK; + if (epctl & DXEPCTL_EPENA) + epctl |= DXEPCTL_EPDIS; + } else { + epctl &= ~DXEPCTL_STALL; + hs_ep->wedged = 0; + xfertype = epctl & DXEPCTL_EPTYPE_MASK; + if (xfertype == DXEPCTL_EPTYPE_BULK || + xfertype == DXEPCTL_EPTYPE_INTERRUPT) + epctl |= DXEPCTL_SETD0PID; + } + dwc2_writel(hs, epctl, epreg); + } else { + epreg = DOEPCTL(index); + epctl = dwc2_readl(hs, epreg); + + if (value) { + /* Unmask GOUTNAKEFF interrupt */ + dwc2_hsotg_en_gsint(hs, GINTSTS_GOUTNAKEFF); + + if (!(dwc2_readl(hs, GINTSTS) & GINTSTS_GOUTNAKEFF)) + dwc2_set_bit(hs, DCTL, DCTL_SGOUTNAK); + // STALL bit will be set in GOUTNAKEFF interrupt handler + } else { + epctl &= ~DXEPCTL_STALL; + hs_ep->wedged = 0; + xfertype = epctl & DXEPCTL_EPTYPE_MASK; + if (xfertype == DXEPCTL_EPTYPE_BULK || + xfertype == DXEPCTL_EPTYPE_INTERRUPT) + epctl |= DXEPCTL_SETD0PID; + dwc2_writel(hs, epctl, epreg); + } + } + + hs_ep->halted = value; + return 0; +} + +/** + * dwc2_hsotg_ep_sethalt_lock - set halt on a given endpoint with lock held + * @ep: The endpoint to set halt. + * @value: Set or unset the halt. + */ +static int dwc2_hsotg_ep_sethalt_lock(struct usb_ep *ep, int value) +{ + struct dwc2_hsotg_ep *hs_ep = our_ep(ep); + struct dwc2_hsotg *hs = hs_ep->parent; + unsigned long flags; + int ret; + + spin_lock_irqsave(&hs->lock, flags); + ret = dwc2_hsotg_ep_sethalt(ep, value, false); + spin_unlock_irqrestore(&hs->lock, flags); + + return ret; +} + +static const struct usb_ep_ops dwc2_hsotg_ep_ops = { + .enable = dwc2_hsotg_ep_enable, + .disable = dwc2_hsotg_ep_disable_lock, + .alloc_request = dwc2_hsotg_ep_alloc_request, + .free_request = dwc2_hsotg_ep_free_request, + .queue = dwc2_hsotg_ep_queue_lock, + .dequeue = dwc2_hsotg_ep_dequeue, + .set_halt = dwc2_hsotg_ep_sethalt_lock, + .set_wedge = dwc2_gadget_ep_set_wedge, + /* note, don't believe we have any call for the fifo routines */ +}; + +/** + * dwc2_hsotg_init - initialize the usb core + * @hsotg: The driver state + */ +static void dwc2_hsotg_init(struct dwc2_hsotg *hsotg) +{ + /* unmask subset of endpoint interrupts */ + + dwc2_writel(hsotg, DIEPMSK_TIMEOUTMSK | DIEPMSK_AHBERRMSK | + DIEPMSK_EPDISBLDMSK | DIEPMSK_XFERCOMPLMSK, + DIEPMSK); + + dwc2_writel(hsotg, DOEPMSK_SETUPMSK | DOEPMSK_AHBERRMSK | + DOEPMSK_EPDISBLDMSK | DOEPMSK_XFERCOMPLMSK, + DOEPMSK); + + dwc2_writel(hsotg, 0, DAINTMSK); + + /* Be in disconnected state until gadget is registered */ + dwc2_set_bit(hsotg, DCTL, DCTL_SFTDISCON); + + /* setup fifos */ + + dev_dbg(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n", + dwc2_readl(hsotg, GRXFSIZ), + dwc2_readl(hsotg, GNPTXFSIZ)); + + dwc2_hsotg_init_fifo(hsotg); + + if (using_dma(hsotg)) + dwc2_set_bit(hsotg, GAHBCFG, GAHBCFG_DMA_EN); +} + +/** + * dwc2_hsotg_udc_start - prepare the udc for work + * @gadget: The usb gadget state + * @driver: The usb gadget driver + * + * Perform initialization to prepare udc device and driver + * to work. + */ +static int dwc2_hsotg_udc_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct dwc2_hsotg *hsotg = to_hsotg(gadget); + unsigned long flags; + int ret; + + if (!hsotg) { + pr_err("%s: called with no device\n", __func__); + return -ENODEV; + } + + if (!driver) { + dev_err(hsotg->dev, "%s: no driver\n", __func__); + return -EINVAL; + } + + if (driver->max_speed < USB_SPEED_FULL) + dev_err(hsotg->dev, "%s: bad speed\n", __func__); + + if (!driver->setup) { + dev_err(hsotg->dev, "%s: missing entry points\n", __func__); + return -EINVAL; + } + + WARN_ON(hsotg->driver); + + hsotg->driver = driver; + hsotg->gadget.dev.of_node = hsotg->dev->of_node; + hsotg->gadget.speed = USB_SPEED_UNKNOWN; + + if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) { + ret = dwc2_lowlevel_hw_enable(hsotg); + if (ret) + goto err; + } + + if (!IS_ERR_OR_NULL(hsotg->uphy)) + otg_set_peripheral(hsotg->uphy->otg, &hsotg->gadget); + + spin_lock_irqsave(&hsotg->lock, flags); + if (dwc2_hw_is_device(hsotg)) { + dwc2_hsotg_init(hsotg); + dwc2_hsotg_core_init_disconnected(hsotg, false); + } + + hsotg->enabled = 0; + spin_unlock_irqrestore(&hsotg->lock, flags); + + gadget->sg_supported = using_desc_dma(hsotg); + dev_info(hsotg->dev, "bound driver %s\n", driver->driver.name); + + return 0; + +err: + hsotg->driver = NULL; + return ret; +} + +/** + * dwc2_hsotg_udc_stop - stop the udc + * @gadget: The usb gadget state + * + * Stop udc hw block and stay tunned for future transmissions + */ +static int dwc2_hsotg_udc_stop(struct usb_gadget *gadget) +{ + struct dwc2_hsotg *hsotg = to_hsotg(gadget); + unsigned long flags; + int ep; + + if (!hsotg) + return -ENODEV; + + /* all endpoints should be shutdown */ + for (ep = 1; ep < hsotg->num_of_eps; ep++) { + if (hsotg->eps_in[ep]) + dwc2_hsotg_ep_disable_lock(&hsotg->eps_in[ep]->ep); + if (hsotg->eps_out[ep]) + dwc2_hsotg_ep_disable_lock(&hsotg->eps_out[ep]->ep); + } + + spin_lock_irqsave(&hsotg->lock, flags); + + hsotg->driver = NULL; + hsotg->gadget.speed = USB_SPEED_UNKNOWN; + hsotg->enabled = 0; + + spin_unlock_irqrestore(&hsotg->lock, flags); + + if (!IS_ERR_OR_NULL(hsotg->uphy)) + otg_set_peripheral(hsotg->uphy->otg, NULL); + + if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) + dwc2_lowlevel_hw_disable(hsotg); + + return 0; +} + +/** + * dwc2_hsotg_gadget_getframe - read the frame number + * @gadget: The usb gadget state + * + * Read the {micro} frame number + */ +static int dwc2_hsotg_gadget_getframe(struct usb_gadget *gadget) +{ + return dwc2_hsotg_read_frameno(to_hsotg(gadget)); +} + +/** + * dwc2_hsotg_set_selfpowered - set if device is self/bus powered + * @gadget: The usb gadget state + * @is_selfpowered: Whether the device is self-powered + * + * Set if the device is self or bus powered. + */ +static int dwc2_hsotg_set_selfpowered(struct usb_gadget *gadget, + int is_selfpowered) +{ + struct dwc2_hsotg *hsotg = to_hsotg(gadget); + unsigned long flags; + + spin_lock_irqsave(&hsotg->lock, flags); + gadget->is_selfpowered = !!is_selfpowered; + spin_unlock_irqrestore(&hsotg->lock, flags); + + return 0; +} + +/** + * dwc2_hsotg_pullup - connect/disconnect the USB PHY + * @gadget: The usb gadget state + * @is_on: Current state of the USB PHY + * + * Connect/Disconnect the USB PHY pullup + */ +static int dwc2_hsotg_pullup(struct usb_gadget *gadget, int is_on) +{ + struct dwc2_hsotg *hsotg = to_hsotg(gadget); + unsigned long flags; + + dev_dbg(hsotg->dev, "%s: is_on: %d op_state: %d\n", __func__, is_on, + hsotg->op_state); + + /* Don't modify pullup state while in host mode */ + if (hsotg->op_state != OTG_STATE_B_PERIPHERAL) { + hsotg->enabled = is_on; + return 0; + } + + spin_lock_irqsave(&hsotg->lock, flags); + if (is_on) { + hsotg->enabled = 1; + dwc2_hsotg_core_init_disconnected(hsotg, false); + /* Enable ACG feature in device mode,if supported */ + dwc2_enable_acg(hsotg); + dwc2_hsotg_core_connect(hsotg); + } else { + dwc2_hsotg_core_disconnect(hsotg); + dwc2_hsotg_disconnect(hsotg); + hsotg->enabled = 0; + } + + hsotg->gadget.speed = USB_SPEED_UNKNOWN; + spin_unlock_irqrestore(&hsotg->lock, flags); + + return 0; +} + +static int dwc2_hsotg_vbus_session(struct usb_gadget *gadget, int is_active) +{ + struct dwc2_hsotg *hsotg = to_hsotg(gadget); + unsigned long flags; + + dev_dbg(hsotg->dev, "%s: is_active: %d\n", __func__, is_active); + spin_lock_irqsave(&hsotg->lock, flags); + + /* + * If controller is in partial power down state, it must exit from + * that state before being initialized / de-initialized + */ + if (hsotg->lx_state == DWC2_L2 && hsotg->in_ppd) + /* + * No need to check the return value as + * registers are not being restored. + */ + dwc2_exit_partial_power_down(hsotg, 0, false); + + if (is_active) { + hsotg->op_state = OTG_STATE_B_PERIPHERAL; + + dwc2_hsotg_core_init_disconnected(hsotg, false); + if (hsotg->enabled) { + /* Enable ACG feature in device mode,if supported */ + dwc2_enable_acg(hsotg); + dwc2_hsotg_core_connect(hsotg); + } + } else { + dwc2_hsotg_core_disconnect(hsotg); + dwc2_hsotg_disconnect(hsotg); + } + + spin_unlock_irqrestore(&hsotg->lock, flags); + return 0; +} + +/** + * dwc2_hsotg_vbus_draw - report bMaxPower field + * @gadget: The usb gadget state + * @mA: Amount of current + * + * Report how much power the device may consume to the phy. + */ +static int dwc2_hsotg_vbus_draw(struct usb_gadget *gadget, unsigned int mA) +{ + struct dwc2_hsotg *hsotg = to_hsotg(gadget); + + if (IS_ERR_OR_NULL(hsotg->uphy)) + return -ENOTSUPP; + return usb_phy_set_power(hsotg->uphy, mA); +} + +static void dwc2_gadget_set_speed(struct usb_gadget *g, enum usb_device_speed speed) +{ + struct dwc2_hsotg *hsotg = to_hsotg(g); + unsigned long flags; + + spin_lock_irqsave(&hsotg->lock, flags); + switch (speed) { + case USB_SPEED_HIGH: + hsotg->params.speed = DWC2_SPEED_PARAM_HIGH; + break; + case USB_SPEED_FULL: + hsotg->params.speed = DWC2_SPEED_PARAM_FULL; + break; + case USB_SPEED_LOW: + hsotg->params.speed = DWC2_SPEED_PARAM_LOW; + break; + default: + dev_err(hsotg->dev, "invalid speed (%d)\n", speed); + } + spin_unlock_irqrestore(&hsotg->lock, flags); +} + +static const struct usb_gadget_ops dwc2_hsotg_gadget_ops = { + .get_frame = dwc2_hsotg_gadget_getframe, + .set_selfpowered = dwc2_hsotg_set_selfpowered, + .udc_start = dwc2_hsotg_udc_start, + .udc_stop = dwc2_hsotg_udc_stop, + .pullup = dwc2_hsotg_pullup, + .udc_set_speed = dwc2_gadget_set_speed, + .vbus_session = dwc2_hsotg_vbus_session, + .vbus_draw = dwc2_hsotg_vbus_draw, +}; + +/** + * dwc2_hsotg_initep - initialise a single endpoint + * @hsotg: The device state. + * @hs_ep: The endpoint to be initialised. + * @epnum: The endpoint number + * @dir_in: True if direction is in. + * + * Initialise the given endpoint (as part of the probe and device state + * creation) to give to the gadget driver. Setup the endpoint name, any + * direction information and other state that may be required. + */ +static void dwc2_hsotg_initep(struct dwc2_hsotg *hsotg, + struct dwc2_hsotg_ep *hs_ep, + int epnum, + bool dir_in) +{ + char *dir; + + if (epnum == 0) + dir = ""; + else if (dir_in) + dir = "in"; + else + dir = "out"; + + hs_ep->dir_in = dir_in; + hs_ep->index = epnum; + + snprintf(hs_ep->name, sizeof(hs_ep->name), "ep%d%s", epnum, dir); + + INIT_LIST_HEAD(&hs_ep->queue); + INIT_LIST_HEAD(&hs_ep->ep.ep_list); + + /* add to the list of endpoints known by the gadget driver */ + if (epnum) + list_add_tail(&hs_ep->ep.ep_list, &hsotg->gadget.ep_list); + + hs_ep->parent = hsotg; + hs_ep->ep.name = hs_ep->name; + + if (hsotg->params.speed == DWC2_SPEED_PARAM_LOW) + usb_ep_set_maxpacket_limit(&hs_ep->ep, 8); + else + usb_ep_set_maxpacket_limit(&hs_ep->ep, + epnum ? 1024 : EP0_MPS_LIMIT); + hs_ep->ep.ops = &dwc2_hsotg_ep_ops; + + if (epnum == 0) { + hs_ep->ep.caps.type_control = true; + } else { + if (hsotg->params.speed != DWC2_SPEED_PARAM_LOW) { + hs_ep->ep.caps.type_iso = true; + hs_ep->ep.caps.type_bulk = true; + } + hs_ep->ep.caps.type_int = true; + } + + if (dir_in) + hs_ep->ep.caps.dir_in = true; + else + hs_ep->ep.caps.dir_out = true; + + /* + * if we're using dma, we need to set the next-endpoint pointer + * to be something valid. + */ + + if (using_dma(hsotg)) { + u32 next = DXEPCTL_NEXTEP((epnum + 1) % 15); + + if (dir_in) + dwc2_writel(hsotg, next, DIEPCTL(epnum)); + else + dwc2_writel(hsotg, next, DOEPCTL(epnum)); + } +} + +/** + * dwc2_hsotg_hw_cfg - read HW configuration registers + * @hsotg: Programming view of the DWC_otg controller + * + * Read the USB core HW configuration registers + */ +static int dwc2_hsotg_hw_cfg(struct dwc2_hsotg *hsotg) +{ + u32 cfg; + u32 ep_type; + u32 i; + + /* check hardware configuration */ + + hsotg->num_of_eps = hsotg->hw_params.num_dev_ep; + + /* Add ep0 */ + hsotg->num_of_eps++; + + hsotg->eps_in[0] = devm_kzalloc(hsotg->dev, + sizeof(struct dwc2_hsotg_ep), + GFP_KERNEL); + if (!hsotg->eps_in[0]) + return -ENOMEM; + /* Same dwc2_hsotg_ep is used in both directions for ep0 */ + hsotg->eps_out[0] = hsotg->eps_in[0]; + + cfg = hsotg->hw_params.dev_ep_dirs; + for (i = 1, cfg >>= 2; i < hsotg->num_of_eps; i++, cfg >>= 2) { + ep_type = cfg & 3; + /* Direction in or both */ + if (!(ep_type & 2)) { + hsotg->eps_in[i] = devm_kzalloc(hsotg->dev, + sizeof(struct dwc2_hsotg_ep), GFP_KERNEL); + if (!hsotg->eps_in[i]) + return -ENOMEM; + } + /* Direction out or both */ + if (!(ep_type & 1)) { + hsotg->eps_out[i] = devm_kzalloc(hsotg->dev, + sizeof(struct dwc2_hsotg_ep), GFP_KERNEL); + if (!hsotg->eps_out[i]) + return -ENOMEM; + } + } + + hsotg->fifo_mem = hsotg->hw_params.total_fifo_size; + hsotg->dedicated_fifos = hsotg->hw_params.en_multiple_tx_fifo; + + dev_info(hsotg->dev, "EPs: %d, %s fifos, %d entries in SPRAM\n", + hsotg->num_of_eps, + hsotg->dedicated_fifos ? "dedicated" : "shared", + hsotg->fifo_mem); + return 0; +} + +/** + * dwc2_hsotg_dump - dump state of the udc + * @hsotg: Programming view of the DWC_otg controller + * + */ +static void dwc2_hsotg_dump(struct dwc2_hsotg *hsotg) +{ +#ifdef DEBUG + struct device *dev = hsotg->dev; + u32 val; + int idx; + + dev_info(dev, "DCFG=0x%08x, DCTL=0x%08x, DIEPMSK=%08x\n", + dwc2_readl(hsotg, DCFG), dwc2_readl(hsotg, DCTL), + dwc2_readl(hsotg, DIEPMSK)); + + dev_info(dev, "GAHBCFG=0x%08x, GHWCFG1=0x%08x\n", + dwc2_readl(hsotg, GAHBCFG), dwc2_readl(hsotg, GHWCFG1)); + + dev_info(dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n", + dwc2_readl(hsotg, GRXFSIZ), dwc2_readl(hsotg, GNPTXFSIZ)); + + /* show periodic fifo settings */ + + for (idx = 1; idx < hsotg->num_of_eps; idx++) { + val = dwc2_readl(hsotg, DPTXFSIZN(idx)); + dev_info(dev, "DPTx[%d] FSize=%d, StAddr=0x%08x\n", idx, + val >> FIFOSIZE_DEPTH_SHIFT, + val & FIFOSIZE_STARTADDR_MASK); + } + + for (idx = 0; idx < hsotg->num_of_eps; idx++) { + dev_info(dev, + "ep%d-in: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n", idx, + dwc2_readl(hsotg, DIEPCTL(idx)), + dwc2_readl(hsotg, DIEPTSIZ(idx)), + dwc2_readl(hsotg, DIEPDMA(idx))); + + val = dwc2_readl(hsotg, DOEPCTL(idx)); + dev_info(dev, + "ep%d-out: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n", + idx, dwc2_readl(hsotg, DOEPCTL(idx)), + dwc2_readl(hsotg, DOEPTSIZ(idx)), + dwc2_readl(hsotg, DOEPDMA(idx))); + } + + dev_info(dev, "DVBUSDIS=0x%08x, DVBUSPULSE=%08x\n", + dwc2_readl(hsotg, DVBUSDIS), dwc2_readl(hsotg, DVBUSPULSE)); +#endif +} + +/** + * dwc2_gadget_init - init function for gadget + * @hsotg: Programming view of the DWC_otg controller + * + */ +int dwc2_gadget_init(struct dwc2_hsotg *hsotg) +{ + struct device *dev = hsotg->dev; + int epnum; + int ret; + + /* Dump fifo information */ + dev_dbg(dev, "NonPeriodic TXFIFO size: %d\n", + hsotg->params.g_np_tx_fifo_size); + dev_dbg(dev, "RXFIFO size: %d\n", hsotg->params.g_rx_fifo_size); + + switch (hsotg->params.speed) { + case DWC2_SPEED_PARAM_LOW: + hsotg->gadget.max_speed = USB_SPEED_LOW; + break; + case DWC2_SPEED_PARAM_FULL: + hsotg->gadget.max_speed = USB_SPEED_FULL; + break; + default: + hsotg->gadget.max_speed = USB_SPEED_HIGH; + break; + } + + hsotg->gadget.ops = &dwc2_hsotg_gadget_ops; + hsotg->gadget.name = dev_name(dev); + hsotg->gadget.otg_caps = &hsotg->params.otg_caps; + hsotg->remote_wakeup_allowed = 0; + + if (hsotg->params.lpm) + hsotg->gadget.lpm_capable = true; + + if (hsotg->dr_mode == USB_DR_MODE_OTG) + hsotg->gadget.is_otg = 1; + else if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) + hsotg->op_state = OTG_STATE_B_PERIPHERAL; + + ret = dwc2_hsotg_hw_cfg(hsotg); + if (ret) { + dev_err(hsotg->dev, "Hardware configuration failed: %d\n", ret); + return ret; + } + + hsotg->ctrl_buff = devm_kzalloc(hsotg->dev, + DWC2_CTRL_BUFF_SIZE, GFP_KERNEL); + if (!hsotg->ctrl_buff) + return -ENOMEM; + + hsotg->ep0_buff = devm_kzalloc(hsotg->dev, + DWC2_CTRL_BUFF_SIZE, GFP_KERNEL); + if (!hsotg->ep0_buff) + return -ENOMEM; + + if (using_desc_dma(hsotg)) { + ret = dwc2_gadget_alloc_ctrl_desc_chains(hsotg); + if (ret < 0) + return ret; + } + + ret = devm_request_irq(hsotg->dev, hsotg->irq, dwc2_hsotg_irq, + IRQF_SHARED, dev_name(hsotg->dev), hsotg); + if (ret < 0) { + dev_err(dev, "cannot claim IRQ for gadget\n"); + return ret; + } + + /* hsotg->num_of_eps holds number of EPs other than ep0 */ + + if (hsotg->num_of_eps == 0) { + dev_err(dev, "wrong number of EPs (zero)\n"); + return -EINVAL; + } + + /* setup endpoint information */ + + INIT_LIST_HEAD(&hsotg->gadget.ep_list); + hsotg->gadget.ep0 = &hsotg->eps_out[0]->ep; + + /* allocate EP0 request */ + + hsotg->ctrl_req = dwc2_hsotg_ep_alloc_request(&hsotg->eps_out[0]->ep, + GFP_KERNEL); + if (!hsotg->ctrl_req) { + dev_err(dev, "failed to allocate ctrl req\n"); + return -ENOMEM; + } + + /* initialise the endpoints now the core has been initialised */ + for (epnum = 0; epnum < hsotg->num_of_eps; epnum++) { + if (hsotg->eps_in[epnum]) + dwc2_hsotg_initep(hsotg, hsotg->eps_in[epnum], + epnum, 1); + if (hsotg->eps_out[epnum]) + dwc2_hsotg_initep(hsotg, hsotg->eps_out[epnum], + epnum, 0); + } + + dwc2_hsotg_dump(hsotg); + + return 0; +} + +/** + * dwc2_hsotg_remove - remove function for hsotg driver + * @hsotg: Programming view of the DWC_otg controller + * + */ +int dwc2_hsotg_remove(struct dwc2_hsotg *hsotg) +{ + usb_del_gadget_udc(&hsotg->gadget); + dwc2_hsotg_ep_free_request(&hsotg->eps_out[0]->ep, hsotg->ctrl_req); + + return 0; +} + +int dwc2_hsotg_suspend(struct dwc2_hsotg *hsotg) +{ + unsigned long flags; + + if (hsotg->lx_state != DWC2_L0) + return 0; + + if (hsotg->driver) { + int ep; + + dev_info(hsotg->dev, "suspending usb gadget %s\n", + hsotg->driver->driver.name); + + spin_lock_irqsave(&hsotg->lock, flags); + if (hsotg->enabled) + dwc2_hsotg_core_disconnect(hsotg); + dwc2_hsotg_disconnect(hsotg); + hsotg->gadget.speed = USB_SPEED_UNKNOWN; + spin_unlock_irqrestore(&hsotg->lock, flags); + + for (ep = 1; ep < hsotg->num_of_eps; ep++) { + if (hsotg->eps_in[ep]) + dwc2_hsotg_ep_disable_lock(&hsotg->eps_in[ep]->ep); + if (hsotg->eps_out[ep]) + dwc2_hsotg_ep_disable_lock(&hsotg->eps_out[ep]->ep); + } + } + + return 0; +} + +int dwc2_hsotg_resume(struct dwc2_hsotg *hsotg) +{ + unsigned long flags; + + if (hsotg->lx_state == DWC2_L2) + return 0; + + if (hsotg->driver) { + dev_info(hsotg->dev, "resuming usb gadget %s\n", + hsotg->driver->driver.name); + + spin_lock_irqsave(&hsotg->lock, flags); + dwc2_hsotg_core_init_disconnected(hsotg, false); + if (hsotg->enabled) { + /* Enable ACG feature in device mode,if supported */ + dwc2_enable_acg(hsotg); + dwc2_hsotg_core_connect(hsotg); + } + spin_unlock_irqrestore(&hsotg->lock, flags); + } + + return 0; +} + +/** + * dwc2_backup_device_registers() - Backup controller device registers. + * When suspending usb bus, registers needs to be backuped + * if controller power is disabled once suspended. + * + * @hsotg: Programming view of the DWC_otg controller + */ +int dwc2_backup_device_registers(struct dwc2_hsotg *hsotg) +{ + struct dwc2_dregs_backup *dr; + int i; + + dev_dbg(hsotg->dev, "%s\n", __func__); + + /* Backup dev regs */ + dr = &hsotg->dr_backup; + + dr->dcfg = dwc2_readl(hsotg, DCFG); + dr->dctl = dwc2_readl(hsotg, DCTL); + dr->daintmsk = dwc2_readl(hsotg, DAINTMSK); + dr->diepmsk = dwc2_readl(hsotg, DIEPMSK); + dr->doepmsk = dwc2_readl(hsotg, DOEPMSK); + + for (i = 0; i < hsotg->num_of_eps; i++) { + /* Backup IN EPs */ + dr->diepctl[i] = dwc2_readl(hsotg, DIEPCTL(i)); + + /* Ensure DATA PID is correctly configured */ + if (dr->diepctl[i] & DXEPCTL_DPID) + dr->diepctl[i] |= DXEPCTL_SETD1PID; + else + dr->diepctl[i] |= DXEPCTL_SETD0PID; + + dr->dieptsiz[i] = dwc2_readl(hsotg, DIEPTSIZ(i)); + dr->diepdma[i] = dwc2_readl(hsotg, DIEPDMA(i)); + + /* Backup OUT EPs */ + dr->doepctl[i] = dwc2_readl(hsotg, DOEPCTL(i)); + + /* Ensure DATA PID is correctly configured */ + if (dr->doepctl[i] & DXEPCTL_DPID) + dr->doepctl[i] |= DXEPCTL_SETD1PID; + else + dr->doepctl[i] |= DXEPCTL_SETD0PID; + + dr->doeptsiz[i] = dwc2_readl(hsotg, DOEPTSIZ(i)); + dr->doepdma[i] = dwc2_readl(hsotg, DOEPDMA(i)); + dr->dtxfsiz[i] = dwc2_readl(hsotg, DPTXFSIZN(i)); + } + dr->valid = true; + return 0; +} + +/** + * dwc2_restore_device_registers() - Restore controller device registers. + * When resuming usb bus, device registers needs to be restored + * if controller power were disabled. + * + * @hsotg: Programming view of the DWC_otg controller + * @remote_wakeup: Indicates whether resume is initiated by Device or Host. + * + * Return: 0 if successful, negative error code otherwise + */ +int dwc2_restore_device_registers(struct dwc2_hsotg *hsotg, int remote_wakeup) +{ + struct dwc2_dregs_backup *dr; + int i; + + dev_dbg(hsotg->dev, "%s\n", __func__); + + /* Restore dev regs */ + dr = &hsotg->dr_backup; + if (!dr->valid) { + dev_err(hsotg->dev, "%s: no device registers to restore\n", + __func__); + return -EINVAL; + } + dr->valid = false; + + if (!remote_wakeup) + dwc2_writel(hsotg, dr->dctl, DCTL); + + dwc2_writel(hsotg, dr->daintmsk, DAINTMSK); + dwc2_writel(hsotg, dr->diepmsk, DIEPMSK); + dwc2_writel(hsotg, dr->doepmsk, DOEPMSK); + + for (i = 0; i < hsotg->num_of_eps; i++) { + /* Restore IN EPs */ + dwc2_writel(hsotg, dr->dieptsiz[i], DIEPTSIZ(i)); + dwc2_writel(hsotg, dr->diepdma[i], DIEPDMA(i)); + dwc2_writel(hsotg, dr->doeptsiz[i], DOEPTSIZ(i)); + /** WA for enabled EPx's IN in DDMA mode. On entering to + * hibernation wrong value read and saved from DIEPDMAx, + * as result BNA interrupt asserted on hibernation exit + * by restoring from saved area. + */ + if (using_desc_dma(hsotg) && + (dr->diepctl[i] & DXEPCTL_EPENA)) + dr->diepdma[i] = hsotg->eps_in[i]->desc_list_dma; + dwc2_writel(hsotg, dr->dtxfsiz[i], DPTXFSIZN(i)); + dwc2_writel(hsotg, dr->diepctl[i], DIEPCTL(i)); + /* Restore OUT EPs */ + dwc2_writel(hsotg, dr->doeptsiz[i], DOEPTSIZ(i)); + /* WA for enabled EPx's OUT in DDMA mode. On entering to + * hibernation wrong value read and saved from DOEPDMAx, + * as result BNA interrupt asserted on hibernation exit + * by restoring from saved area. + */ + if (using_desc_dma(hsotg) && + (dr->doepctl[i] & DXEPCTL_EPENA)) + dr->doepdma[i] = hsotg->eps_out[i]->desc_list_dma; + dwc2_writel(hsotg, dr->doepdma[i], DOEPDMA(i)); + dwc2_writel(hsotg, dr->doepctl[i], DOEPCTL(i)); + } + + return 0; +} + +/** + * dwc2_gadget_init_lpm - Configure the core to support LPM in device mode + * + * @hsotg: Programming view of DWC_otg controller + * + */ +void dwc2_gadget_init_lpm(struct dwc2_hsotg *hsotg) +{ + u32 val; + + if (!hsotg->params.lpm) + return; + + val = GLPMCFG_LPMCAP | GLPMCFG_APPL1RES; + val |= hsotg->params.hird_threshold_en ? GLPMCFG_HIRD_THRES_EN : 0; + val |= hsotg->params.lpm_clock_gating ? GLPMCFG_ENBLSLPM : 0; + val |= hsotg->params.hird_threshold << GLPMCFG_HIRD_THRES_SHIFT; + val |= hsotg->params.besl ? GLPMCFG_ENBESL : 0; + val |= GLPMCFG_LPM_REJECT_CTRL_CONTROL; + val |= GLPMCFG_LPM_ACCEPT_CTRL_ISOC; + dwc2_writel(hsotg, val, GLPMCFG); + dev_dbg(hsotg->dev, "GLPMCFG=0x%08x\n", dwc2_readl(hsotg, GLPMCFG)); + + /* Unmask WKUP_ALERT Interrupt */ + if (hsotg->params.service_interval) + dwc2_set_bit(hsotg, GINTMSK2, GINTMSK2_WKUP_ALERT_INT_MSK); +} + +/** + * dwc2_gadget_program_ref_clk - Program GREFCLK register in device mode + * + * @hsotg: Programming view of DWC_otg controller + * + */ +void dwc2_gadget_program_ref_clk(struct dwc2_hsotg *hsotg) +{ + u32 val = 0; + + val |= GREFCLK_REF_CLK_MODE; + val |= hsotg->params.ref_clk_per << GREFCLK_REFCLKPER_SHIFT; + val |= hsotg->params.sof_cnt_wkup_alert << + GREFCLK_SOF_CNT_WKUP_ALERT_SHIFT; + + dwc2_writel(hsotg, val, GREFCLK); + dev_dbg(hsotg->dev, "GREFCLK=0x%08x\n", dwc2_readl(hsotg, GREFCLK)); +} + +/** + * dwc2_gadget_enter_hibernation() - Put controller in Hibernation. + * + * @hsotg: Programming view of the DWC_otg controller + * + * Return non-zero if failed to enter to hibernation. + */ +int dwc2_gadget_enter_hibernation(struct dwc2_hsotg *hsotg) +{ + u32 gpwrdn; + int ret = 0; + + /* Change to L2(suspend) state */ + hsotg->lx_state = DWC2_L2; + dev_dbg(hsotg->dev, "Start of hibernation completed\n"); + ret = dwc2_backup_global_registers(hsotg); + if (ret) { + dev_err(hsotg->dev, "%s: failed to backup global registers\n", + __func__); + return ret; + } + ret = dwc2_backup_device_registers(hsotg); + if (ret) { + dev_err(hsotg->dev, "%s: failed to backup device registers\n", + __func__); + return ret; + } + + gpwrdn = GPWRDN_PWRDNRSTN; + gpwrdn |= GPWRDN_PMUACTV; + dwc2_writel(hsotg, gpwrdn, GPWRDN); + udelay(10); + + /* Set flag to indicate that we are in hibernation */ + hsotg->hibernated = 1; + + /* Enable interrupts from wake up logic */ + gpwrdn = dwc2_readl(hsotg, GPWRDN); + gpwrdn |= GPWRDN_PMUINTSEL; + dwc2_writel(hsotg, gpwrdn, GPWRDN); + udelay(10); + + /* Unmask device mode interrupts in GPWRDN */ + gpwrdn = dwc2_readl(hsotg, GPWRDN); + gpwrdn |= GPWRDN_RST_DET_MSK; + gpwrdn |= GPWRDN_LNSTSCHG_MSK; + gpwrdn |= GPWRDN_STS_CHGINT_MSK; + dwc2_writel(hsotg, gpwrdn, GPWRDN); + udelay(10); + + /* Enable Power Down Clamp */ + gpwrdn = dwc2_readl(hsotg, GPWRDN); + gpwrdn |= GPWRDN_PWRDNCLMP; + dwc2_writel(hsotg, gpwrdn, GPWRDN); + udelay(10); + + /* Switch off VDD */ + gpwrdn = dwc2_readl(hsotg, GPWRDN); + gpwrdn |= GPWRDN_PWRDNSWTCH; + dwc2_writel(hsotg, gpwrdn, GPWRDN); + udelay(10); + + /* Save gpwrdn register for further usage if stschng interrupt */ + hsotg->gr_backup.gpwrdn = dwc2_readl(hsotg, GPWRDN); + dev_dbg(hsotg->dev, "Hibernation completed\n"); + + return ret; +} + +/** + * dwc2_gadget_exit_hibernation() + * This function is for exiting from Device mode hibernation by host initiated + * resume/reset and device initiated remote-wakeup. + * + * @hsotg: Programming view of the DWC_otg controller + * @rem_wakeup: indicates whether resume is initiated by Device or Host. + * @reset: indicates whether resume is initiated by Reset. + * + * Return non-zero if failed to exit from hibernation. + */ +int dwc2_gadget_exit_hibernation(struct dwc2_hsotg *hsotg, + int rem_wakeup, int reset) +{ + u32 pcgcctl; + u32 gpwrdn; + u32 dctl; + int ret = 0; + struct dwc2_gregs_backup *gr; + struct dwc2_dregs_backup *dr; + + gr = &hsotg->gr_backup; + dr = &hsotg->dr_backup; + + if (!hsotg->hibernated) { + dev_dbg(hsotg->dev, "Already exited from Hibernation\n"); + return 1; + } + dev_dbg(hsotg->dev, + "%s: called with rem_wakeup = %d reset = %d\n", + __func__, rem_wakeup, reset); + + dwc2_hib_restore_common(hsotg, rem_wakeup, 0); + + if (!reset) { + /* Clear all pending interupts */ + dwc2_writel(hsotg, 0xffffffff, GINTSTS); + } + + /* De-assert Restore */ + gpwrdn = dwc2_readl(hsotg, GPWRDN); + gpwrdn &= ~GPWRDN_RESTORE; + dwc2_writel(hsotg, gpwrdn, GPWRDN); + udelay(10); + + if (!rem_wakeup) { + pcgcctl = dwc2_readl(hsotg, PCGCTL); + pcgcctl &= ~PCGCTL_RSTPDWNMODULE; + dwc2_writel(hsotg, pcgcctl, PCGCTL); + } + + /* Restore GUSBCFG, DCFG and DCTL */ + dwc2_writel(hsotg, gr->gusbcfg, GUSBCFG); + dwc2_writel(hsotg, dr->dcfg, DCFG); + dwc2_writel(hsotg, dr->dctl, DCTL); + + /* On USB Reset, reset device address to zero */ + if (reset) + dwc2_clear_bit(hsotg, DCFG, DCFG_DEVADDR_MASK); + + /* De-assert Wakeup Logic */ + gpwrdn = dwc2_readl(hsotg, GPWRDN); + gpwrdn &= ~GPWRDN_PMUACTV; + dwc2_writel(hsotg, gpwrdn, GPWRDN); + + if (rem_wakeup) { + udelay(10); + /* Start Remote Wakeup Signaling */ + dwc2_writel(hsotg, dr->dctl | DCTL_RMTWKUPSIG, DCTL); + } else { + udelay(50); + /* Set Device programming done bit */ + dctl = dwc2_readl(hsotg, DCTL); + dctl |= DCTL_PWRONPRGDONE; + dwc2_writel(hsotg, dctl, DCTL); + } + /* Wait for interrupts which must be cleared */ + mdelay(2); + /* Clear all pending interupts */ + dwc2_writel(hsotg, 0xffffffff, GINTSTS); + + /* Restore global registers */ + ret = dwc2_restore_global_registers(hsotg); + if (ret) { + dev_err(hsotg->dev, "%s: failed to restore registers\n", + __func__); + return ret; + } + + /* Restore device registers */ + ret = dwc2_restore_device_registers(hsotg, rem_wakeup); + if (ret) { + dev_err(hsotg->dev, "%s: failed to restore device registers\n", + __func__); + return ret; + } + + if (rem_wakeup) { + mdelay(10); + dctl = dwc2_readl(hsotg, DCTL); + dctl &= ~DCTL_RMTWKUPSIG; + dwc2_writel(hsotg, dctl, DCTL); + } + + hsotg->hibernated = 0; + hsotg->lx_state = DWC2_L0; + dev_dbg(hsotg->dev, "Hibernation recovery completes here\n"); + + return ret; +} + +/** + * dwc2_gadget_enter_partial_power_down() - Put controller in partial + * power down. + * + * @hsotg: Programming view of the DWC_otg controller + * + * Return: non-zero if failed to enter device partial power down. + * + * This function is for entering device mode partial power down. + */ +int dwc2_gadget_enter_partial_power_down(struct dwc2_hsotg *hsotg) +{ + u32 pcgcctl; + int ret = 0; + + dev_dbg(hsotg->dev, "Entering device partial power down started.\n"); + + /* Backup all registers */ + ret = dwc2_backup_global_registers(hsotg); + if (ret) { + dev_err(hsotg->dev, "%s: failed to backup global registers\n", + __func__); + return ret; + } + + ret = dwc2_backup_device_registers(hsotg); + if (ret) { + dev_err(hsotg->dev, "%s: failed to backup device registers\n", + __func__); + return ret; + } + + /* + * Clear any pending interrupts since dwc2 will not be able to + * clear them after entering partial_power_down. + */ + dwc2_writel(hsotg, 0xffffffff, GINTSTS); + + /* Put the controller in low power state */ + pcgcctl = dwc2_readl(hsotg, PCGCTL); + + pcgcctl |= PCGCTL_PWRCLMP; + dwc2_writel(hsotg, pcgcctl, PCGCTL); + udelay(5); + + pcgcctl |= PCGCTL_RSTPDWNMODULE; + dwc2_writel(hsotg, pcgcctl, PCGCTL); + udelay(5); + + pcgcctl |= PCGCTL_STOPPCLK; + dwc2_writel(hsotg, pcgcctl, PCGCTL); + + /* Set in_ppd flag to 1 as here core enters suspend. */ + hsotg->in_ppd = 1; + hsotg->lx_state = DWC2_L2; + + dev_dbg(hsotg->dev, "Entering device partial power down completed.\n"); + + return ret; +} + +/* + * dwc2_gadget_exit_partial_power_down() - Exit controller from device partial + * power down. + * + * @hsotg: Programming view of the DWC_otg controller + * @restore: indicates whether need to restore the registers or not. + * + * Return: non-zero if failed to exit device partial power down. + * + * This function is for exiting from device mode partial power down. + */ +int dwc2_gadget_exit_partial_power_down(struct dwc2_hsotg *hsotg, + bool restore) +{ + u32 pcgcctl; + u32 dctl; + struct dwc2_dregs_backup *dr; + int ret = 0; + + dr = &hsotg->dr_backup; + + dev_dbg(hsotg->dev, "Exiting device partial Power Down started.\n"); + + pcgcctl = dwc2_readl(hsotg, PCGCTL); + pcgcctl &= ~PCGCTL_STOPPCLK; + dwc2_writel(hsotg, pcgcctl, PCGCTL); + + pcgcctl = dwc2_readl(hsotg, PCGCTL); + pcgcctl &= ~PCGCTL_PWRCLMP; + dwc2_writel(hsotg, pcgcctl, PCGCTL); + + pcgcctl = dwc2_readl(hsotg, PCGCTL); + pcgcctl &= ~PCGCTL_RSTPDWNMODULE; + dwc2_writel(hsotg, pcgcctl, PCGCTL); + + udelay(100); + if (restore) { + ret = dwc2_restore_global_registers(hsotg); + if (ret) { + dev_err(hsotg->dev, "%s: failed to restore registers\n", + __func__); + return ret; + } + /* Restore DCFG */ + dwc2_writel(hsotg, dr->dcfg, DCFG); + + ret = dwc2_restore_device_registers(hsotg, 0); + if (ret) { + dev_err(hsotg->dev, "%s: failed to restore device registers\n", + __func__); + return ret; + } + } + + /* Set the Power-On Programming done bit */ + dctl = dwc2_readl(hsotg, DCTL); + dctl |= DCTL_PWRONPRGDONE; + dwc2_writel(hsotg, dctl, DCTL); + + /* Set in_ppd flag to 0 as here core exits from suspend. */ + hsotg->in_ppd = 0; + hsotg->lx_state = DWC2_L0; + + dev_dbg(hsotg->dev, "Exiting device partial Power Down completed.\n"); + return ret; +} + +/** + * dwc2_gadget_enter_clock_gating() - Put controller in clock gating. + * + * @hsotg: Programming view of the DWC_otg controller + * + * Return: non-zero if failed to enter device partial power down. + * + * This function is for entering device mode clock gating. + */ +void dwc2_gadget_enter_clock_gating(struct dwc2_hsotg *hsotg) +{ + u32 pcgctl; + + dev_dbg(hsotg->dev, "Entering device clock gating.\n"); + + /* Set the Phy Clock bit as suspend is received. */ + pcgctl = dwc2_readl(hsotg, PCGCTL); + pcgctl |= PCGCTL_STOPPCLK; + dwc2_writel(hsotg, pcgctl, PCGCTL); + udelay(5); + + /* Set the Gate hclk as suspend is received. */ + pcgctl = dwc2_readl(hsotg, PCGCTL); + pcgctl |= PCGCTL_GATEHCLK; + dwc2_writel(hsotg, pcgctl, PCGCTL); + udelay(5); + + hsotg->lx_state = DWC2_L2; + hsotg->bus_suspended = true; +} + +/* + * dwc2_gadget_exit_clock_gating() - Exit controller from device clock gating. + * + * @hsotg: Programming view of the DWC_otg controller + * @rem_wakeup: indicates whether remote wake up is enabled. + * + * This function is for exiting from device mode clock gating. + */ +void dwc2_gadget_exit_clock_gating(struct dwc2_hsotg *hsotg, int rem_wakeup) +{ + u32 pcgctl; + u32 dctl; + + dev_dbg(hsotg->dev, "Exiting device clock gating.\n"); + + /* Clear the Gate hclk. */ + pcgctl = dwc2_readl(hsotg, PCGCTL); + pcgctl &= ~PCGCTL_GATEHCLK; + dwc2_writel(hsotg, pcgctl, PCGCTL); + udelay(5); + + /* Phy Clock bit. */ + pcgctl = dwc2_readl(hsotg, PCGCTL); + pcgctl &= ~PCGCTL_STOPPCLK; + dwc2_writel(hsotg, pcgctl, PCGCTL); + udelay(5); + + if (rem_wakeup) { + /* Set Remote Wakeup Signaling */ + dctl = dwc2_readl(hsotg, DCTL); + dctl |= DCTL_RMTWKUPSIG; + dwc2_writel(hsotg, dctl, DCTL); + } + + /* Change to L0 state */ + call_gadget(hsotg, resume); + hsotg->lx_state = DWC2_L0; + hsotg->bus_suspended = false; +} diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c new file mode 100644 index 0000000000..35c7a4df8e --- /dev/null +++ b/drivers/usb/dwc2/hcd.c @@ -0,0 +1,5954 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * hcd.c - DesignWare HS OTG Controller host-mode routines + * + * Copyright (C) 2004-2013 Synopsys, Inc. + */ + +/* + * This file contains the core HCD code, and implements the Linux hc_driver + * API + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/usb.h> + +#include <linux/usb/hcd.h> +#include <linux/usb/ch11.h> +#include <linux/usb/of.h> + +#include "core.h" +#include "hcd.h" + +/* + * ========================================================================= + * Host Core Layer Functions + * ========================================================================= + */ + +/** + * dwc2_enable_common_interrupts() - Initializes the commmon interrupts, + * used in both device and host modes + * + * @hsotg: Programming view of the DWC_otg controller + */ +static void dwc2_enable_common_interrupts(struct dwc2_hsotg *hsotg) +{ + u32 intmsk; + + /* Clear any pending OTG Interrupts */ + dwc2_writel(hsotg, 0xffffffff, GOTGINT); + + /* Clear any pending interrupts */ + dwc2_writel(hsotg, 0xffffffff, GINTSTS); + + /* Enable the interrupts in the GINTMSK */ + intmsk = GINTSTS_MODEMIS | GINTSTS_OTGINT; + + if (!hsotg->params.host_dma) + intmsk |= GINTSTS_RXFLVL; + if (!hsotg->params.external_id_pin_ctl) + intmsk |= GINTSTS_CONIDSTSCHNG; + + intmsk |= GINTSTS_WKUPINT | GINTSTS_USBSUSP | + GINTSTS_SESSREQINT; + + if (dwc2_is_device_mode(hsotg) && hsotg->params.lpm) + intmsk |= GINTSTS_LPMTRANRCVD; + + dwc2_writel(hsotg, intmsk, GINTMSK); +} + +static int dwc2_gahbcfg_init(struct dwc2_hsotg *hsotg) +{ + u32 ahbcfg = dwc2_readl(hsotg, GAHBCFG); + + switch (hsotg->hw_params.arch) { + case GHWCFG2_EXT_DMA_ARCH: + dev_err(hsotg->dev, "External DMA Mode not supported\n"); + return -EINVAL; + + case GHWCFG2_INT_DMA_ARCH: + dev_dbg(hsotg->dev, "Internal DMA Mode\n"); + if (hsotg->params.ahbcfg != -1) { + ahbcfg &= GAHBCFG_CTRL_MASK; + ahbcfg |= hsotg->params.ahbcfg & + ~GAHBCFG_CTRL_MASK; + } + break; + + case GHWCFG2_SLAVE_ONLY_ARCH: + default: + dev_dbg(hsotg->dev, "Slave Only Mode\n"); + break; + } + + if (hsotg->params.host_dma) + ahbcfg |= GAHBCFG_DMA_EN; + else + hsotg->params.dma_desc_enable = false; + + dwc2_writel(hsotg, ahbcfg, GAHBCFG); + + return 0; +} + +static void dwc2_gusbcfg_init(struct dwc2_hsotg *hsotg) +{ + u32 usbcfg; + + usbcfg = dwc2_readl(hsotg, GUSBCFG); + usbcfg &= ~(GUSBCFG_HNPCAP | GUSBCFG_SRPCAP); + + switch (hsotg->hw_params.op_mode) { + case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE: + if (hsotg->params.otg_caps.hnp_support && + hsotg->params.otg_caps.srp_support) + usbcfg |= GUSBCFG_HNPCAP; + fallthrough; + + case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE: + case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE: + case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST: + if (hsotg->params.otg_caps.srp_support) + usbcfg |= GUSBCFG_SRPCAP; + break; + + case GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE: + case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE: + case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST: + default: + break; + } + + dwc2_writel(hsotg, usbcfg, GUSBCFG); +} + +static int dwc2_vbus_supply_init(struct dwc2_hsotg *hsotg) +{ + if (hsotg->vbus_supply) + return regulator_enable(hsotg->vbus_supply); + + return 0; +} + +static int dwc2_vbus_supply_exit(struct dwc2_hsotg *hsotg) +{ + if (hsotg->vbus_supply) + return regulator_disable(hsotg->vbus_supply); + + return 0; +} + +/** + * dwc2_enable_host_interrupts() - Enables the Host mode interrupts + * + * @hsotg: Programming view of DWC_otg controller + */ +static void dwc2_enable_host_interrupts(struct dwc2_hsotg *hsotg) +{ + u32 intmsk; + + dev_dbg(hsotg->dev, "%s()\n", __func__); + + /* Disable all interrupts */ + dwc2_writel(hsotg, 0, GINTMSK); + dwc2_writel(hsotg, 0, HAINTMSK); + + /* Enable the common interrupts */ + dwc2_enable_common_interrupts(hsotg); + + /* Enable host mode interrupts without disturbing common interrupts */ + intmsk = dwc2_readl(hsotg, GINTMSK); + intmsk |= GINTSTS_DISCONNINT | GINTSTS_PRTINT | GINTSTS_HCHINT; + dwc2_writel(hsotg, intmsk, GINTMSK); +} + +/** + * dwc2_disable_host_interrupts() - Disables the Host Mode interrupts + * + * @hsotg: Programming view of DWC_otg controller + */ +static void dwc2_disable_host_interrupts(struct dwc2_hsotg *hsotg) +{ + u32 intmsk = dwc2_readl(hsotg, GINTMSK); + + /* Disable host mode interrupts without disturbing common interrupts */ + intmsk &= ~(GINTSTS_SOF | GINTSTS_PRTINT | GINTSTS_HCHINT | + GINTSTS_PTXFEMP | GINTSTS_NPTXFEMP | GINTSTS_DISCONNINT); + dwc2_writel(hsotg, intmsk, GINTMSK); +} + +/* + * dwc2_calculate_dynamic_fifo() - Calculates the default fifo size + * For system that have a total fifo depth that is smaller than the default + * RX + TX fifo size. + * + * @hsotg: Programming view of DWC_otg controller + */ +static void dwc2_calculate_dynamic_fifo(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *params = &hsotg->params; + struct dwc2_hw_params *hw = &hsotg->hw_params; + u32 rxfsiz, nptxfsiz, ptxfsiz, total_fifo_size; + + total_fifo_size = hw->total_fifo_size; + rxfsiz = params->host_rx_fifo_size; + nptxfsiz = params->host_nperio_tx_fifo_size; + ptxfsiz = params->host_perio_tx_fifo_size; + + /* + * Will use Method 2 defined in the DWC2 spec: minimum FIFO depth + * allocation with support for high bandwidth endpoints. Synopsys + * defines MPS(Max Packet size) for a periodic EP=1024, and for + * non-periodic as 512. + */ + if (total_fifo_size < (rxfsiz + nptxfsiz + ptxfsiz)) { + /* + * For Buffer DMA mode/Scatter Gather DMA mode + * 2 * ((Largest Packet size / 4) + 1 + 1) + n + * with n = number of host channel. + * 2 * ((1024/4) + 2) = 516 + */ + rxfsiz = 516 + hw->host_channels; + + /* + * min non-periodic tx fifo depth + * 2 * (largest non-periodic USB packet used / 4) + * 2 * (512/4) = 256 + */ + nptxfsiz = 256; + + /* + * min periodic tx fifo depth + * (largest packet size*MC)/4 + * (1024 * 3)/4 = 768 + */ + ptxfsiz = 768; + + params->host_rx_fifo_size = rxfsiz; + params->host_nperio_tx_fifo_size = nptxfsiz; + params->host_perio_tx_fifo_size = ptxfsiz; + } + + /* + * If the summation of RX, NPTX and PTX fifo sizes is still + * bigger than the total_fifo_size, then we have a problem. + * + * We won't be able to allocate as many endpoints. Right now, + * we're just printing an error message, but ideally this FIFO + * allocation algorithm would be improved in the future. + * + * FIXME improve this FIFO allocation algorithm. + */ + if (unlikely(total_fifo_size < (rxfsiz + nptxfsiz + ptxfsiz))) + dev_err(hsotg->dev, "invalid fifo sizes\n"); +} + +static void dwc2_config_fifos(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *params = &hsotg->params; + u32 nptxfsiz, hptxfsiz, dfifocfg, grxfsiz; + + if (!params->enable_dynamic_fifo) + return; + + dwc2_calculate_dynamic_fifo(hsotg); + + /* Rx FIFO */ + grxfsiz = dwc2_readl(hsotg, GRXFSIZ); + dev_dbg(hsotg->dev, "initial grxfsiz=%08x\n", grxfsiz); + grxfsiz &= ~GRXFSIZ_DEPTH_MASK; + grxfsiz |= params->host_rx_fifo_size << + GRXFSIZ_DEPTH_SHIFT & GRXFSIZ_DEPTH_MASK; + dwc2_writel(hsotg, grxfsiz, GRXFSIZ); + dev_dbg(hsotg->dev, "new grxfsiz=%08x\n", + dwc2_readl(hsotg, GRXFSIZ)); + + /* Non-periodic Tx FIFO */ + dev_dbg(hsotg->dev, "initial gnptxfsiz=%08x\n", + dwc2_readl(hsotg, GNPTXFSIZ)); + nptxfsiz = params->host_nperio_tx_fifo_size << + FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK; + nptxfsiz |= params->host_rx_fifo_size << + FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK; + dwc2_writel(hsotg, nptxfsiz, GNPTXFSIZ); + dev_dbg(hsotg->dev, "new gnptxfsiz=%08x\n", + dwc2_readl(hsotg, GNPTXFSIZ)); + + /* Periodic Tx FIFO */ + dev_dbg(hsotg->dev, "initial hptxfsiz=%08x\n", + dwc2_readl(hsotg, HPTXFSIZ)); + hptxfsiz = params->host_perio_tx_fifo_size << + FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK; + hptxfsiz |= (params->host_rx_fifo_size + + params->host_nperio_tx_fifo_size) << + FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK; + dwc2_writel(hsotg, hptxfsiz, HPTXFSIZ); + dev_dbg(hsotg->dev, "new hptxfsiz=%08x\n", + dwc2_readl(hsotg, HPTXFSIZ)); + + if (hsotg->params.en_multiple_tx_fifo && + hsotg->hw_params.snpsid >= DWC2_CORE_REV_2_91a) { + /* + * This feature was implemented in 2.91a version + * Global DFIFOCFG calculation for Host mode - + * include RxFIFO, NPTXFIFO and HPTXFIFO + */ + dfifocfg = dwc2_readl(hsotg, GDFIFOCFG); + dfifocfg &= ~GDFIFOCFG_EPINFOBASE_MASK; + dfifocfg |= (params->host_rx_fifo_size + + params->host_nperio_tx_fifo_size + + params->host_perio_tx_fifo_size) << + GDFIFOCFG_EPINFOBASE_SHIFT & + GDFIFOCFG_EPINFOBASE_MASK; + dwc2_writel(hsotg, dfifocfg, GDFIFOCFG); + } +} + +/** + * dwc2_calc_frame_interval() - Calculates the correct frame Interval value for + * the HFIR register according to PHY type and speed + * + * @hsotg: Programming view of DWC_otg controller + * + * NOTE: The caller can modify the value of the HFIR register only after the + * Port Enable bit of the Host Port Control and Status register (HPRT.EnaPort) + * has been set + */ +u32 dwc2_calc_frame_interval(struct dwc2_hsotg *hsotg) +{ + u32 usbcfg; + u32 hprt0; + int clock = 60; /* default value */ + + usbcfg = dwc2_readl(hsotg, GUSBCFG); + hprt0 = dwc2_readl(hsotg, HPRT0); + + if (!(usbcfg & GUSBCFG_PHYSEL) && (usbcfg & GUSBCFG_ULPI_UTMI_SEL) && + !(usbcfg & GUSBCFG_PHYIF16)) + clock = 60; + if ((usbcfg & GUSBCFG_PHYSEL) && hsotg->hw_params.fs_phy_type == + GHWCFG2_FS_PHY_TYPE_SHARED_ULPI) + clock = 48; + if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) && + !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && (usbcfg & GUSBCFG_PHYIF16)) + clock = 30; + if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) && + !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && !(usbcfg & GUSBCFG_PHYIF16)) + clock = 60; + if ((usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) && + !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && (usbcfg & GUSBCFG_PHYIF16)) + clock = 48; + if ((usbcfg & GUSBCFG_PHYSEL) && !(usbcfg & GUSBCFG_PHYIF16) && + hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_SHARED_UTMI) + clock = 48; + if ((usbcfg & GUSBCFG_PHYSEL) && + hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED) + clock = 48; + + if ((hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT == HPRT0_SPD_HIGH_SPEED) + /* High speed case */ + return 125 * clock - 1; + + /* FS/LS case */ + return 1000 * clock - 1; +} + +/** + * dwc2_read_packet() - Reads a packet from the Rx FIFO into the destination + * buffer + * + * @hsotg: Programming view of DWC_otg controller + * @dest: Destination buffer for the packet + * @bytes: Number of bytes to copy to the destination + */ +void dwc2_read_packet(struct dwc2_hsotg *hsotg, u8 *dest, u16 bytes) +{ + u32 *data_buf = (u32 *)dest; + int word_count = (bytes + 3) / 4; + int i; + + /* + * Todo: Account for the case where dest is not dword aligned. This + * requires reading data from the FIFO into a u32 temp buffer, then + * moving it into the data buffer. + */ + + dev_vdbg(hsotg->dev, "%s(%p,%p,%d)\n", __func__, hsotg, dest, bytes); + + for (i = 0; i < word_count; i++, data_buf++) + *data_buf = dwc2_readl(hsotg, HCFIFO(0)); +} + +/** + * dwc2_dump_channel_info() - Prints the state of a host channel + * + * @hsotg: Programming view of DWC_otg controller + * @chan: Pointer to the channel to dump + * + * Must be called with interrupt disabled and spinlock held + * + * NOTE: This function will be removed once the peripheral controller code + * is integrated and the driver is stable + */ +static void dwc2_dump_channel_info(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan) +{ +#ifdef VERBOSE_DEBUG + int num_channels = hsotg->params.host_channels; + struct dwc2_qh *qh; + u32 hcchar; + u32 hcsplt; + u32 hctsiz; + u32 hc_dma; + int i; + + if (!chan) + return; + + hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); + hcsplt = dwc2_readl(hsotg, HCSPLT(chan->hc_num)); + hctsiz = dwc2_readl(hsotg, HCTSIZ(chan->hc_num)); + hc_dma = dwc2_readl(hsotg, HCDMA(chan->hc_num)); + + dev_dbg(hsotg->dev, " Assigned to channel %p:\n", chan); + dev_dbg(hsotg->dev, " hcchar 0x%08x, hcsplt 0x%08x\n", + hcchar, hcsplt); + dev_dbg(hsotg->dev, " hctsiz 0x%08x, hc_dma 0x%08x\n", + hctsiz, hc_dma); + dev_dbg(hsotg->dev, " dev_addr: %d, ep_num: %d, ep_is_in: %d\n", + chan->dev_addr, chan->ep_num, chan->ep_is_in); + dev_dbg(hsotg->dev, " ep_type: %d\n", chan->ep_type); + dev_dbg(hsotg->dev, " max_packet: %d\n", chan->max_packet); + dev_dbg(hsotg->dev, " data_pid_start: %d\n", chan->data_pid_start); + dev_dbg(hsotg->dev, " xfer_started: %d\n", chan->xfer_started); + dev_dbg(hsotg->dev, " halt_status: %d\n", chan->halt_status); + dev_dbg(hsotg->dev, " xfer_buf: %p\n", chan->xfer_buf); + dev_dbg(hsotg->dev, " xfer_dma: %08lx\n", + (unsigned long)chan->xfer_dma); + dev_dbg(hsotg->dev, " xfer_len: %d\n", chan->xfer_len); + dev_dbg(hsotg->dev, " qh: %p\n", chan->qh); + dev_dbg(hsotg->dev, " NP inactive sched:\n"); + list_for_each_entry(qh, &hsotg->non_periodic_sched_inactive, + qh_list_entry) + dev_dbg(hsotg->dev, " %p\n", qh); + dev_dbg(hsotg->dev, " NP waiting sched:\n"); + list_for_each_entry(qh, &hsotg->non_periodic_sched_waiting, + qh_list_entry) + dev_dbg(hsotg->dev, " %p\n", qh); + dev_dbg(hsotg->dev, " NP active sched:\n"); + list_for_each_entry(qh, &hsotg->non_periodic_sched_active, + qh_list_entry) + dev_dbg(hsotg->dev, " %p\n", qh); + dev_dbg(hsotg->dev, " Channels:\n"); + for (i = 0; i < num_channels; i++) { + struct dwc2_host_chan *chan = hsotg->hc_ptr_array[i]; + + dev_dbg(hsotg->dev, " %2d: %p\n", i, chan); + } +#endif /* VERBOSE_DEBUG */ +} + +static int _dwc2_hcd_start(struct usb_hcd *hcd); + +static void dwc2_host_start(struct dwc2_hsotg *hsotg) +{ + struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg); + + hcd->self.is_b_host = dwc2_hcd_is_b_host(hsotg); + _dwc2_hcd_start(hcd); +} + +static void dwc2_host_disconnect(struct dwc2_hsotg *hsotg) +{ + struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg); + + hcd->self.is_b_host = 0; +} + +static void dwc2_host_hub_info(struct dwc2_hsotg *hsotg, void *context, + int *hub_addr, int *hub_port) +{ + struct urb *urb = context; + + if (urb->dev->tt) + *hub_addr = urb->dev->tt->hub->devnum; + else + *hub_addr = 0; + *hub_port = urb->dev->ttport; +} + +/* + * ========================================================================= + * Low Level Host Channel Access Functions + * ========================================================================= + */ + +static void dwc2_hc_enable_slave_ints(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan) +{ + u32 hcintmsk = HCINTMSK_CHHLTD; + + switch (chan->ep_type) { + case USB_ENDPOINT_XFER_CONTROL: + case USB_ENDPOINT_XFER_BULK: + dev_vdbg(hsotg->dev, "control/bulk\n"); + hcintmsk |= HCINTMSK_XFERCOMPL; + hcintmsk |= HCINTMSK_STALL; + hcintmsk |= HCINTMSK_XACTERR; + hcintmsk |= HCINTMSK_DATATGLERR; + if (chan->ep_is_in) { + hcintmsk |= HCINTMSK_BBLERR; + } else { + hcintmsk |= HCINTMSK_NAK; + hcintmsk |= HCINTMSK_NYET; + if (chan->do_ping) + hcintmsk |= HCINTMSK_ACK; + } + + if (chan->do_split) { + hcintmsk |= HCINTMSK_NAK; + if (chan->complete_split) + hcintmsk |= HCINTMSK_NYET; + else + hcintmsk |= HCINTMSK_ACK; + } + + if (chan->error_state) + hcintmsk |= HCINTMSK_ACK; + break; + + case USB_ENDPOINT_XFER_INT: + if (dbg_perio()) + dev_vdbg(hsotg->dev, "intr\n"); + hcintmsk |= HCINTMSK_XFERCOMPL; + hcintmsk |= HCINTMSK_NAK; + hcintmsk |= HCINTMSK_STALL; + hcintmsk |= HCINTMSK_XACTERR; + hcintmsk |= HCINTMSK_DATATGLERR; + hcintmsk |= HCINTMSK_FRMOVRUN; + + if (chan->ep_is_in) + hcintmsk |= HCINTMSK_BBLERR; + if (chan->error_state) + hcintmsk |= HCINTMSK_ACK; + if (chan->do_split) { + if (chan->complete_split) + hcintmsk |= HCINTMSK_NYET; + else + hcintmsk |= HCINTMSK_ACK; + } + break; + + case USB_ENDPOINT_XFER_ISOC: + if (dbg_perio()) + dev_vdbg(hsotg->dev, "isoc\n"); + hcintmsk |= HCINTMSK_XFERCOMPL; + hcintmsk |= HCINTMSK_FRMOVRUN; + hcintmsk |= HCINTMSK_ACK; + + if (chan->ep_is_in) { + hcintmsk |= HCINTMSK_XACTERR; + hcintmsk |= HCINTMSK_BBLERR; + } + break; + default: + dev_err(hsotg->dev, "## Unknown EP type ##\n"); + break; + } + + dwc2_writel(hsotg, hcintmsk, HCINTMSK(chan->hc_num)); + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk); +} + +static void dwc2_hc_enable_dma_ints(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan) +{ + u32 hcintmsk = HCINTMSK_CHHLTD; + + /* + * For Descriptor DMA mode core halts the channel on AHB error. + * Interrupt is not required. + */ + if (!hsotg->params.dma_desc_enable) { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "desc DMA disabled\n"); + hcintmsk |= HCINTMSK_AHBERR; + } else { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "desc DMA enabled\n"); + if (chan->ep_type == USB_ENDPOINT_XFER_ISOC) + hcintmsk |= HCINTMSK_XFERCOMPL; + } + + if (chan->error_state && !chan->do_split && + chan->ep_type != USB_ENDPOINT_XFER_ISOC) { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "setting ACK\n"); + hcintmsk |= HCINTMSK_ACK; + if (chan->ep_is_in) { + hcintmsk |= HCINTMSK_DATATGLERR; + if (chan->ep_type != USB_ENDPOINT_XFER_INT) + hcintmsk |= HCINTMSK_NAK; + } + } + + dwc2_writel(hsotg, hcintmsk, HCINTMSK(chan->hc_num)); + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk); +} + +static void dwc2_hc_enable_ints(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan) +{ + u32 intmsk; + + if (hsotg->params.host_dma) { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "DMA enabled\n"); + dwc2_hc_enable_dma_ints(hsotg, chan); + } else { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "DMA disabled\n"); + dwc2_hc_enable_slave_ints(hsotg, chan); + } + + /* Enable the top level host channel interrupt */ + intmsk = dwc2_readl(hsotg, HAINTMSK); + intmsk |= 1 << chan->hc_num; + dwc2_writel(hsotg, intmsk, HAINTMSK); + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "set HAINTMSK to %08x\n", intmsk); + + /* Make sure host channel interrupts are enabled */ + intmsk = dwc2_readl(hsotg, GINTMSK); + intmsk |= GINTSTS_HCHINT; + dwc2_writel(hsotg, intmsk, GINTMSK); + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "set GINTMSK to %08x\n", intmsk); +} + +/** + * dwc2_hc_init() - Prepares a host channel for transferring packets to/from + * a specific endpoint + * + * @hsotg: Programming view of DWC_otg controller + * @chan: Information needed to initialize the host channel + * + * The HCCHARn register is set up with the characteristics specified in chan. + * Host channel interrupts that may need to be serviced while this transfer is + * in progress are enabled. + */ +static void dwc2_hc_init(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan) +{ + u8 hc_num = chan->hc_num; + u32 hcintmsk; + u32 hcchar; + u32 hcsplt = 0; + + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "%s()\n", __func__); + + /* Clear old interrupt conditions for this host channel */ + hcintmsk = 0xffffffff; + hcintmsk &= ~HCINTMSK_RESERVED14_31; + dwc2_writel(hsotg, hcintmsk, HCINT(hc_num)); + + /* Enable channel interrupts required for this transfer */ + dwc2_hc_enable_ints(hsotg, chan); + + /* + * Program the HCCHARn register with the endpoint characteristics for + * the current transfer + */ + hcchar = chan->dev_addr << HCCHAR_DEVADDR_SHIFT & HCCHAR_DEVADDR_MASK; + hcchar |= chan->ep_num << HCCHAR_EPNUM_SHIFT & HCCHAR_EPNUM_MASK; + if (chan->ep_is_in) + hcchar |= HCCHAR_EPDIR; + if (chan->speed == USB_SPEED_LOW) + hcchar |= HCCHAR_LSPDDEV; + hcchar |= chan->ep_type << HCCHAR_EPTYPE_SHIFT & HCCHAR_EPTYPE_MASK; + hcchar |= chan->max_packet << HCCHAR_MPS_SHIFT & HCCHAR_MPS_MASK; + dwc2_writel(hsotg, hcchar, HCCHAR(hc_num)); + if (dbg_hc(chan)) { + dev_vdbg(hsotg->dev, "set HCCHAR(%d) to %08x\n", + hc_num, hcchar); + + dev_vdbg(hsotg->dev, "%s: Channel %d\n", + __func__, hc_num); + dev_vdbg(hsotg->dev, " Dev Addr: %d\n", + chan->dev_addr); + dev_vdbg(hsotg->dev, " Ep Num: %d\n", + chan->ep_num); + dev_vdbg(hsotg->dev, " Is In: %d\n", + chan->ep_is_in); + dev_vdbg(hsotg->dev, " Is Low Speed: %d\n", + chan->speed == USB_SPEED_LOW); + dev_vdbg(hsotg->dev, " Ep Type: %d\n", + chan->ep_type); + dev_vdbg(hsotg->dev, " Max Pkt: %d\n", + chan->max_packet); + } + + /* Program the HCSPLT register for SPLITs */ + if (chan->do_split) { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, + "Programming HC %d with split --> %s\n", + hc_num, + chan->complete_split ? "CSPLIT" : "SSPLIT"); + if (chan->complete_split) + hcsplt |= HCSPLT_COMPSPLT; + hcsplt |= chan->xact_pos << HCSPLT_XACTPOS_SHIFT & + HCSPLT_XACTPOS_MASK; + hcsplt |= chan->hub_addr << HCSPLT_HUBADDR_SHIFT & + HCSPLT_HUBADDR_MASK; + hcsplt |= chan->hub_port << HCSPLT_PRTADDR_SHIFT & + HCSPLT_PRTADDR_MASK; + if (dbg_hc(chan)) { + dev_vdbg(hsotg->dev, " comp split %d\n", + chan->complete_split); + dev_vdbg(hsotg->dev, " xact pos %d\n", + chan->xact_pos); + dev_vdbg(hsotg->dev, " hub addr %d\n", + chan->hub_addr); + dev_vdbg(hsotg->dev, " hub port %d\n", + chan->hub_port); + dev_vdbg(hsotg->dev, " is_in %d\n", + chan->ep_is_in); + dev_vdbg(hsotg->dev, " Max Pkt %d\n", + chan->max_packet); + dev_vdbg(hsotg->dev, " xferlen %d\n", + chan->xfer_len); + } + } + + dwc2_writel(hsotg, hcsplt, HCSPLT(hc_num)); +} + +/** + * dwc2_hc_halt() - Attempts to halt a host channel + * + * @hsotg: Controller register interface + * @chan: Host channel to halt + * @halt_status: Reason for halting the channel + * + * This function should only be called in Slave mode or to abort a transfer in + * either Slave mode or DMA mode. Under normal circumstances in DMA mode, the + * controller halts the channel when the transfer is complete or a condition + * occurs that requires application intervention. + * + * In slave mode, checks for a free request queue entry, then sets the Channel + * Enable and Channel Disable bits of the Host Channel Characteristics + * register of the specified channel to intiate the halt. If there is no free + * request queue entry, sets only the Channel Disable bit of the HCCHARn + * register to flush requests for this channel. In the latter case, sets a + * flag to indicate that the host channel needs to be halted when a request + * queue slot is open. + * + * In DMA mode, always sets the Channel Enable and Channel Disable bits of the + * HCCHARn register. The controller ensures there is space in the request + * queue before submitting the halt request. + * + * Some time may elapse before the core flushes any posted requests for this + * host channel and halts. The Channel Halted interrupt handler completes the + * deactivation of the host channel. + */ +void dwc2_hc_halt(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan, + enum dwc2_halt_status halt_status) +{ + u32 nptxsts, hptxsts, hcchar; + + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "%s()\n", __func__); + + /* + * In buffer DMA or external DMA mode channel can't be halted + * for non-split periodic channels. At the end of the next + * uframe/frame (in the worst case), the core generates a channel + * halted and disables the channel automatically. + */ + if ((hsotg->params.g_dma && !hsotg->params.g_dma_desc) || + hsotg->hw_params.arch == GHWCFG2_EXT_DMA_ARCH) { + if (!chan->do_split && + (chan->ep_type == USB_ENDPOINT_XFER_ISOC || + chan->ep_type == USB_ENDPOINT_XFER_INT)) { + dev_err(hsotg->dev, "%s() Channel can't be halted\n", + __func__); + return; + } + } + + if (halt_status == DWC2_HC_XFER_NO_HALT_STATUS) + dev_err(hsotg->dev, "!!! halt_status = %d !!!\n", halt_status); + + if (halt_status == DWC2_HC_XFER_URB_DEQUEUE || + halt_status == DWC2_HC_XFER_AHB_ERR) { + /* + * Disable all channel interrupts except Ch Halted. The QTD + * and QH state associated with this transfer has been cleared + * (in the case of URB_DEQUEUE), so the channel needs to be + * shut down carefully to prevent crashes. + */ + u32 hcintmsk = HCINTMSK_CHHLTD; + + dev_vdbg(hsotg->dev, "dequeue/error\n"); + dwc2_writel(hsotg, hcintmsk, HCINTMSK(chan->hc_num)); + + /* + * Make sure no other interrupts besides halt are currently + * pending. Handling another interrupt could cause a crash due + * to the QTD and QH state. + */ + dwc2_writel(hsotg, ~hcintmsk, HCINT(chan->hc_num)); + + /* + * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR + * even if the channel was already halted for some other + * reason + */ + chan->halt_status = halt_status; + + hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); + if (!(hcchar & HCCHAR_CHENA)) { + /* + * The channel is either already halted or it hasn't + * started yet. In DMA mode, the transfer may halt if + * it finishes normally or a condition occurs that + * requires driver intervention. Don't want to halt + * the channel again. In either Slave or DMA mode, + * it's possible that the transfer has been assigned + * to a channel, but not started yet when an URB is + * dequeued. Don't want to halt a channel that hasn't + * started yet. + */ + return; + } + } + if (chan->halt_pending) { + /* + * A halt has already been issued for this channel. This might + * happen when a transfer is aborted by a higher level in + * the stack. + */ + dev_vdbg(hsotg->dev, + "*** %s: Channel %d, chan->halt_pending already set ***\n", + __func__, chan->hc_num); + return; + } + + hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); + + /* No need to set the bit in DDMA for disabling the channel */ + /* TODO check it everywhere channel is disabled */ + if (!hsotg->params.dma_desc_enable) { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "desc DMA disabled\n"); + hcchar |= HCCHAR_CHENA; + } else { + if (dbg_hc(chan)) + dev_dbg(hsotg->dev, "desc DMA enabled\n"); + } + hcchar |= HCCHAR_CHDIS; + + if (!hsotg->params.host_dma) { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "DMA not enabled\n"); + hcchar |= HCCHAR_CHENA; + + /* Check for space in the request queue to issue the halt */ + if (chan->ep_type == USB_ENDPOINT_XFER_CONTROL || + chan->ep_type == USB_ENDPOINT_XFER_BULK) { + dev_vdbg(hsotg->dev, "control/bulk\n"); + nptxsts = dwc2_readl(hsotg, GNPTXSTS); + if ((nptxsts & TXSTS_QSPCAVAIL_MASK) == 0) { + dev_vdbg(hsotg->dev, "Disabling channel\n"); + hcchar &= ~HCCHAR_CHENA; + } + } else { + if (dbg_perio()) + dev_vdbg(hsotg->dev, "isoc/intr\n"); + hptxsts = dwc2_readl(hsotg, HPTXSTS); + if ((hptxsts & TXSTS_QSPCAVAIL_MASK) == 0 || + hsotg->queuing_high_bandwidth) { + if (dbg_perio()) + dev_vdbg(hsotg->dev, "Disabling channel\n"); + hcchar &= ~HCCHAR_CHENA; + } + } + } else { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "DMA enabled\n"); + } + + dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num)); + chan->halt_status = halt_status; + + if (hcchar & HCCHAR_CHENA) { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "Channel enabled\n"); + chan->halt_pending = 1; + chan->halt_on_queue = 0; + } else { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "Channel disabled\n"); + chan->halt_on_queue = 1; + } + + if (dbg_hc(chan)) { + dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, + chan->hc_num); + dev_vdbg(hsotg->dev, " hcchar: 0x%08x\n", + hcchar); + dev_vdbg(hsotg->dev, " halt_pending: %d\n", + chan->halt_pending); + dev_vdbg(hsotg->dev, " halt_on_queue: %d\n", + chan->halt_on_queue); + dev_vdbg(hsotg->dev, " halt_status: %d\n", + chan->halt_status); + } +} + +/** + * dwc2_hc_cleanup() - Clears the transfer state for a host channel + * + * @hsotg: Programming view of DWC_otg controller + * @chan: Identifies the host channel to clean up + * + * This function is normally called after a transfer is done and the host + * channel is being released + */ +void dwc2_hc_cleanup(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan) +{ + u32 hcintmsk; + + chan->xfer_started = 0; + + list_del_init(&chan->split_order_list_entry); + + /* + * Clear channel interrupt enables and any unhandled channel interrupt + * conditions + */ + dwc2_writel(hsotg, 0, HCINTMSK(chan->hc_num)); + hcintmsk = 0xffffffff; + hcintmsk &= ~HCINTMSK_RESERVED14_31; + dwc2_writel(hsotg, hcintmsk, HCINT(chan->hc_num)); +} + +/** + * dwc2_hc_set_even_odd_frame() - Sets the channel property that indicates in + * which frame a periodic transfer should occur + * + * @hsotg: Programming view of DWC_otg controller + * @chan: Identifies the host channel to set up and its properties + * @hcchar: Current value of the HCCHAR register for the specified host channel + * + * This function has no effect on non-periodic transfers + */ +static void dwc2_hc_set_even_odd_frame(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, u32 *hcchar) +{ + if (chan->ep_type == USB_ENDPOINT_XFER_INT || + chan->ep_type == USB_ENDPOINT_XFER_ISOC) { + int host_speed; + int xfer_ns; + int xfer_us; + int bytes_in_fifo; + u16 fifo_space; + u16 frame_number; + u16 wire_frame; + + /* + * Try to figure out if we're an even or odd frame. If we set + * even and the current frame number is even the transfer + * will happen immediately. Similar if both are odd. If one is + * even and the other is odd then the transfer will happen when + * the frame number ticks. + * + * There's a bit of a balancing act to get this right. + * Sometimes we may want to send data in the current frame (AK + * right away). We might want to do this if the frame number + * _just_ ticked, but we might also want to do this in order + * to continue a split transaction that happened late in a + * microframe (so we didn't know to queue the next transfer + * until the frame number had ticked). The problem is that we + * need a lot of knowledge to know if there's actually still + * time to send things or if it would be better to wait until + * the next frame. + * + * We can look at how much time is left in the current frame + * and make a guess about whether we'll have time to transfer. + * We'll do that. + */ + + /* Get speed host is running at */ + host_speed = (chan->speed != USB_SPEED_HIGH && + !chan->do_split) ? chan->speed : USB_SPEED_HIGH; + + /* See how many bytes are in the periodic FIFO right now */ + fifo_space = (dwc2_readl(hsotg, HPTXSTS) & + TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT; + bytes_in_fifo = sizeof(u32) * + (hsotg->params.host_perio_tx_fifo_size - + fifo_space); + + /* + * Roughly estimate bus time for everything in the periodic + * queue + our new transfer. This is "rough" because we're + * using a function that makes takes into account IN/OUT + * and INT/ISO and we're just slamming in one value for all + * transfers. This should be an over-estimate and that should + * be OK, but we can probably tighten it. + */ + xfer_ns = usb_calc_bus_time(host_speed, false, false, + chan->xfer_len + bytes_in_fifo); + xfer_us = NS_TO_US(xfer_ns); + + /* See what frame number we'll be at by the time we finish */ + frame_number = dwc2_hcd_get_future_frame_number(hsotg, xfer_us); + + /* This is when we were scheduled to be on the wire */ + wire_frame = dwc2_frame_num_inc(chan->qh->next_active_frame, 1); + + /* + * If we'd finish _after_ the frame we're scheduled in then + * it's hopeless. Just schedule right away and hope for the + * best. Note that it _might_ be wise to call back into the + * scheduler to pick a better frame, but this is better than + * nothing. + */ + if (dwc2_frame_num_gt(frame_number, wire_frame)) { + dwc2_sch_vdbg(hsotg, + "QH=%p EO MISS fr=%04x=>%04x (%+d)\n", + chan->qh, wire_frame, frame_number, + dwc2_frame_num_dec(frame_number, + wire_frame)); + wire_frame = frame_number; + + /* + * We picked a different frame number; communicate this + * back to the scheduler so it doesn't try to schedule + * another in the same frame. + * + * Remember that next_active_frame is 1 before the wire + * frame. + */ + chan->qh->next_active_frame = + dwc2_frame_num_dec(frame_number, 1); + } + + if (wire_frame & 1) + *hcchar |= HCCHAR_ODDFRM; + else + *hcchar &= ~HCCHAR_ODDFRM; + } +} + +static void dwc2_set_pid_isoc(struct dwc2_host_chan *chan) +{ + /* Set up the initial PID for the transfer */ + if (chan->speed == USB_SPEED_HIGH) { + if (chan->ep_is_in) { + if (chan->multi_count == 1) + chan->data_pid_start = DWC2_HC_PID_DATA0; + else if (chan->multi_count == 2) + chan->data_pid_start = DWC2_HC_PID_DATA1; + else + chan->data_pid_start = DWC2_HC_PID_DATA2; + } else { + if (chan->multi_count == 1) + chan->data_pid_start = DWC2_HC_PID_DATA0; + else + chan->data_pid_start = DWC2_HC_PID_MDATA; + } + } else { + chan->data_pid_start = DWC2_HC_PID_DATA0; + } +} + +/** + * dwc2_hc_write_packet() - Writes a packet into the Tx FIFO associated with + * the Host Channel + * + * @hsotg: Programming view of DWC_otg controller + * @chan: Information needed to initialize the host channel + * + * This function should only be called in Slave mode. For a channel associated + * with a non-periodic EP, the non-periodic Tx FIFO is written. For a channel + * associated with a periodic EP, the periodic Tx FIFO is written. + * + * Upon return the xfer_buf and xfer_count fields in chan are incremented by + * the number of bytes written to the Tx FIFO. + */ +static void dwc2_hc_write_packet(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan) +{ + u32 i; + u32 remaining_count; + u32 byte_count; + u32 dword_count; + u32 *data_buf = (u32 *)chan->xfer_buf; + + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "%s()\n", __func__); + + remaining_count = chan->xfer_len - chan->xfer_count; + if (remaining_count > chan->max_packet) + byte_count = chan->max_packet; + else + byte_count = remaining_count; + + dword_count = (byte_count + 3) / 4; + + if (((unsigned long)data_buf & 0x3) == 0) { + /* xfer_buf is DWORD aligned */ + for (i = 0; i < dword_count; i++, data_buf++) + dwc2_writel(hsotg, *data_buf, HCFIFO(chan->hc_num)); + } else { + /* xfer_buf is not DWORD aligned */ + for (i = 0; i < dword_count; i++, data_buf++) { + u32 data = data_buf[0] | data_buf[1] << 8 | + data_buf[2] << 16 | data_buf[3] << 24; + dwc2_writel(hsotg, data, HCFIFO(chan->hc_num)); + } + } + + chan->xfer_count += byte_count; + chan->xfer_buf += byte_count; +} + +/** + * dwc2_hc_do_ping() - Starts a PING transfer + * + * @hsotg: Programming view of DWC_otg controller + * @chan: Information needed to initialize the host channel + * + * This function should only be called in Slave mode. The Do Ping bit is set in + * the HCTSIZ register, then the channel is enabled. + */ +static void dwc2_hc_do_ping(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan) +{ + u32 hcchar; + u32 hctsiz; + + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, + chan->hc_num); + + hctsiz = TSIZ_DOPNG; + hctsiz |= 1 << TSIZ_PKTCNT_SHIFT; + dwc2_writel(hsotg, hctsiz, HCTSIZ(chan->hc_num)); + + hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); + hcchar |= HCCHAR_CHENA; + hcchar &= ~HCCHAR_CHDIS; + dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num)); +} + +/** + * dwc2_hc_start_transfer() - Does the setup for a data transfer for a host + * channel and starts the transfer + * + * @hsotg: Programming view of DWC_otg controller + * @chan: Information needed to initialize the host channel. The xfer_len value + * may be reduced to accommodate the max widths of the XferSize and + * PktCnt fields in the HCTSIZn register. The multi_count value may be + * changed to reflect the final xfer_len value. + * + * This function may be called in either Slave mode or DMA mode. In Slave mode, + * the caller must ensure that there is sufficient space in the request queue + * and Tx Data FIFO. + * + * For an OUT transfer in Slave mode, it loads a data packet into the + * appropriate FIFO. If necessary, additional data packets are loaded in the + * Host ISR. + * + * For an IN transfer in Slave mode, a data packet is requested. The data + * packets are unloaded from the Rx FIFO in the Host ISR. If necessary, + * additional data packets are requested in the Host ISR. + * + * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ + * register along with a packet count of 1 and the channel is enabled. This + * causes a single PING transaction to occur. Other fields in HCTSIZ are + * simply set to 0 since no data transfer occurs in this case. + * + * For a PING transfer in DMA mode, the HCTSIZ register is initialized with + * all the information required to perform the subsequent data transfer. In + * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the + * controller performs the entire PING protocol, then starts the data + * transfer. + */ +static void dwc2_hc_start_transfer(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan) +{ + u32 max_hc_xfer_size = hsotg->params.max_transfer_size; + u16 max_hc_pkt_count = hsotg->params.max_packet_count; + u32 hcchar; + u32 hctsiz = 0; + u16 num_packets; + u32 ec_mc; + + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "%s()\n", __func__); + + if (chan->do_ping) { + if (!hsotg->params.host_dma) { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "ping, no DMA\n"); + dwc2_hc_do_ping(hsotg, chan); + chan->xfer_started = 1; + return; + } + + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "ping, DMA\n"); + + hctsiz |= TSIZ_DOPNG; + } + + if (chan->do_split) { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "split\n"); + num_packets = 1; + + if (chan->complete_split && !chan->ep_is_in) + /* + * For CSPLIT OUT Transfer, set the size to 0 so the + * core doesn't expect any data written to the FIFO + */ + chan->xfer_len = 0; + else if (chan->ep_is_in || chan->xfer_len > chan->max_packet) + chan->xfer_len = chan->max_packet; + else if (!chan->ep_is_in && chan->xfer_len > 188) + chan->xfer_len = 188; + + hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT & + TSIZ_XFERSIZE_MASK; + + /* For split set ec_mc for immediate retries */ + if (chan->ep_type == USB_ENDPOINT_XFER_INT || + chan->ep_type == USB_ENDPOINT_XFER_ISOC) + ec_mc = 3; + else + ec_mc = 1; + } else { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "no split\n"); + /* + * Ensure that the transfer length and packet count will fit + * in the widths allocated for them in the HCTSIZn register + */ + if (chan->ep_type == USB_ENDPOINT_XFER_INT || + chan->ep_type == USB_ENDPOINT_XFER_ISOC) { + /* + * Make sure the transfer size is no larger than one + * (micro)frame's worth of data. (A check was done + * when the periodic transfer was accepted to ensure + * that a (micro)frame's worth of data can be + * programmed into a channel.) + */ + u32 max_periodic_len = + chan->multi_count * chan->max_packet; + + if (chan->xfer_len > max_periodic_len) + chan->xfer_len = max_periodic_len; + } else if (chan->xfer_len > max_hc_xfer_size) { + /* + * Make sure that xfer_len is a multiple of max packet + * size + */ + chan->xfer_len = + max_hc_xfer_size - chan->max_packet + 1; + } + + if (chan->xfer_len > 0) { + num_packets = (chan->xfer_len + chan->max_packet - 1) / + chan->max_packet; + if (num_packets > max_hc_pkt_count) { + num_packets = max_hc_pkt_count; + chan->xfer_len = num_packets * chan->max_packet; + } else if (chan->ep_is_in) { + /* + * Always program an integral # of max packets + * for IN transfers. + * Note: This assumes that the input buffer is + * aligned and sized accordingly. + */ + chan->xfer_len = num_packets * chan->max_packet; + } + } else { + /* Need 1 packet for transfer length of 0 */ + num_packets = 1; + } + + if (chan->ep_type == USB_ENDPOINT_XFER_INT || + chan->ep_type == USB_ENDPOINT_XFER_ISOC) + /* + * Make sure that the multi_count field matches the + * actual transfer length + */ + chan->multi_count = num_packets; + + if (chan->ep_type == USB_ENDPOINT_XFER_ISOC) + dwc2_set_pid_isoc(chan); + + hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT & + TSIZ_XFERSIZE_MASK; + + /* The ec_mc gets the multi_count for non-split */ + ec_mc = chan->multi_count; + } + + chan->start_pkt_count = num_packets; + hctsiz |= num_packets << TSIZ_PKTCNT_SHIFT & TSIZ_PKTCNT_MASK; + hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT & + TSIZ_SC_MC_PID_MASK; + dwc2_writel(hsotg, hctsiz, HCTSIZ(chan->hc_num)); + if (dbg_hc(chan)) { + dev_vdbg(hsotg->dev, "Wrote %08x to HCTSIZ(%d)\n", + hctsiz, chan->hc_num); + + dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, + chan->hc_num); + dev_vdbg(hsotg->dev, " Xfer Size: %d\n", + (hctsiz & TSIZ_XFERSIZE_MASK) >> + TSIZ_XFERSIZE_SHIFT); + dev_vdbg(hsotg->dev, " Num Pkts: %d\n", + (hctsiz & TSIZ_PKTCNT_MASK) >> + TSIZ_PKTCNT_SHIFT); + dev_vdbg(hsotg->dev, " Start PID: %d\n", + (hctsiz & TSIZ_SC_MC_PID_MASK) >> + TSIZ_SC_MC_PID_SHIFT); + } + + if (hsotg->params.host_dma) { + dma_addr_t dma_addr; + + if (chan->align_buf) { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "align_buf\n"); + dma_addr = chan->align_buf; + } else { + dma_addr = chan->xfer_dma; + } + dwc2_writel(hsotg, (u32)dma_addr, HCDMA(chan->hc_num)); + + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "Wrote %08lx to HCDMA(%d)\n", + (unsigned long)dma_addr, chan->hc_num); + } + + /* Start the split */ + if (chan->do_split) { + u32 hcsplt = dwc2_readl(hsotg, HCSPLT(chan->hc_num)); + + hcsplt |= HCSPLT_SPLTENA; + dwc2_writel(hsotg, hcsplt, HCSPLT(chan->hc_num)); + } + + hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); + hcchar &= ~HCCHAR_MULTICNT_MASK; + hcchar |= (ec_mc << HCCHAR_MULTICNT_SHIFT) & HCCHAR_MULTICNT_MASK; + dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar); + + if (hcchar & HCCHAR_CHDIS) + dev_warn(hsotg->dev, + "%s: chdis set, channel %d, hcchar 0x%08x\n", + __func__, chan->hc_num, hcchar); + + /* Set host channel enable after all other setup is complete */ + hcchar |= HCCHAR_CHENA; + hcchar &= ~HCCHAR_CHDIS; + + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, " Multi Cnt: %d\n", + (hcchar & HCCHAR_MULTICNT_MASK) >> + HCCHAR_MULTICNT_SHIFT); + + dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num)); + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar, + chan->hc_num); + + chan->xfer_started = 1; + chan->requests++; + + if (!hsotg->params.host_dma && + !chan->ep_is_in && chan->xfer_len > 0) + /* Load OUT packet into the appropriate Tx FIFO */ + dwc2_hc_write_packet(hsotg, chan); +} + +/** + * dwc2_hc_start_transfer_ddma() - Does the setup for a data transfer for a + * host channel and starts the transfer in Descriptor DMA mode + * + * @hsotg: Programming view of DWC_otg controller + * @chan: Information needed to initialize the host channel + * + * Initializes HCTSIZ register. For a PING transfer the Do Ping bit is set. + * Sets PID and NTD values. For periodic transfers initializes SCHED_INFO field + * with micro-frame bitmap. + * + * Initializes HCDMA register with descriptor list address and CTD value then + * starts the transfer via enabling the channel. + */ +void dwc2_hc_start_transfer_ddma(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan) +{ + u32 hcchar; + u32 hctsiz = 0; + + if (chan->do_ping) + hctsiz |= TSIZ_DOPNG; + + if (chan->ep_type == USB_ENDPOINT_XFER_ISOC) + dwc2_set_pid_isoc(chan); + + /* Packet Count and Xfer Size are not used in Descriptor DMA mode */ + hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT & + TSIZ_SC_MC_PID_MASK; + + /* 0 - 1 descriptor, 1 - 2 descriptors, etc */ + hctsiz |= (chan->ntd - 1) << TSIZ_NTD_SHIFT & TSIZ_NTD_MASK; + + /* Non-zero only for high-speed interrupt endpoints */ + hctsiz |= chan->schinfo << TSIZ_SCHINFO_SHIFT & TSIZ_SCHINFO_MASK; + + if (dbg_hc(chan)) { + dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, + chan->hc_num); + dev_vdbg(hsotg->dev, " Start PID: %d\n", + chan->data_pid_start); + dev_vdbg(hsotg->dev, " NTD: %d\n", chan->ntd - 1); + } + + dwc2_writel(hsotg, hctsiz, HCTSIZ(chan->hc_num)); + + dma_sync_single_for_device(hsotg->dev, chan->desc_list_addr, + chan->desc_list_sz, DMA_TO_DEVICE); + + dwc2_writel(hsotg, chan->desc_list_addr, HCDMA(chan->hc_num)); + + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "Wrote %pad to HCDMA(%d)\n", + &chan->desc_list_addr, chan->hc_num); + + hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); + hcchar &= ~HCCHAR_MULTICNT_MASK; + hcchar |= chan->multi_count << HCCHAR_MULTICNT_SHIFT & + HCCHAR_MULTICNT_MASK; + + if (hcchar & HCCHAR_CHDIS) + dev_warn(hsotg->dev, + "%s: chdis set, channel %d, hcchar 0x%08x\n", + __func__, chan->hc_num, hcchar); + + /* Set host channel enable after all other setup is complete */ + hcchar |= HCCHAR_CHENA; + hcchar &= ~HCCHAR_CHDIS; + + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, " Multi Cnt: %d\n", + (hcchar & HCCHAR_MULTICNT_MASK) >> + HCCHAR_MULTICNT_SHIFT); + + dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num)); + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar, + chan->hc_num); + + chan->xfer_started = 1; + chan->requests++; +} + +/** + * dwc2_hc_continue_transfer() - Continues a data transfer that was started by + * a previous call to dwc2_hc_start_transfer() + * + * @hsotg: Programming view of DWC_otg controller + * @chan: Information needed to initialize the host channel + * + * The caller must ensure there is sufficient space in the request queue and Tx + * Data FIFO. This function should only be called in Slave mode. In DMA mode, + * the controller acts autonomously to complete transfers programmed to a host + * channel. + * + * For an OUT transfer, a new data packet is loaded into the appropriate FIFO + * if there is any data remaining to be queued. For an IN transfer, another + * data packet is always requested. For the SETUP phase of a control transfer, + * this function does nothing. + * + * Return: 1 if a new request is queued, 0 if no more requests are required + * for this transfer + */ +static int dwc2_hc_continue_transfer(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan) +{ + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, + chan->hc_num); + + if (chan->do_split) + /* SPLITs always queue just once per channel */ + return 0; + + if (chan->data_pid_start == DWC2_HC_PID_SETUP) + /* SETUPs are queued only once since they can't be NAK'd */ + return 0; + + if (chan->ep_is_in) { + /* + * Always queue another request for other IN transfers. If + * back-to-back INs are issued and NAKs are received for both, + * the driver may still be processing the first NAK when the + * second NAK is received. When the interrupt handler clears + * the NAK interrupt for the first NAK, the second NAK will + * not be seen. So we can't depend on the NAK interrupt + * handler to requeue a NAK'd request. Instead, IN requests + * are issued each time this function is called. When the + * transfer completes, the extra requests for the channel will + * be flushed. + */ + u32 hcchar = dwc2_readl(hsotg, HCCHAR(chan->hc_num)); + + dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar); + hcchar |= HCCHAR_CHENA; + hcchar &= ~HCCHAR_CHDIS; + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, " IN xfer: hcchar = 0x%08x\n", + hcchar); + dwc2_writel(hsotg, hcchar, HCCHAR(chan->hc_num)); + chan->requests++; + return 1; + } + + /* OUT transfers */ + + if (chan->xfer_count < chan->xfer_len) { + if (chan->ep_type == USB_ENDPOINT_XFER_INT || + chan->ep_type == USB_ENDPOINT_XFER_ISOC) { + u32 hcchar = dwc2_readl(hsotg, + HCCHAR(chan->hc_num)); + + dwc2_hc_set_even_odd_frame(hsotg, chan, + &hcchar); + } + + /* Load OUT packet into the appropriate Tx FIFO */ + dwc2_hc_write_packet(hsotg, chan); + chan->requests++; + return 1; + } + + return 0; +} + +/* + * ========================================================================= + * HCD + * ========================================================================= + */ + +/* + * Processes all the URBs in a single list of QHs. Completes them with + * -ETIMEDOUT and frees the QTD. + * + * Must be called with interrupt disabled and spinlock held + */ +static void dwc2_kill_urbs_in_qh_list(struct dwc2_hsotg *hsotg, + struct list_head *qh_list) +{ + struct dwc2_qh *qh, *qh_tmp; + struct dwc2_qtd *qtd, *qtd_tmp; + + list_for_each_entry_safe(qh, qh_tmp, qh_list, qh_list_entry) { + list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, + qtd_list_entry) { + dwc2_host_complete(hsotg, qtd, -ECONNRESET); + dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); + } + } +} + +static void dwc2_qh_list_free(struct dwc2_hsotg *hsotg, + struct list_head *qh_list) +{ + struct dwc2_qtd *qtd, *qtd_tmp; + struct dwc2_qh *qh, *qh_tmp; + unsigned long flags; + + if (!qh_list->next) + /* The list hasn't been initialized yet */ + return; + + spin_lock_irqsave(&hsotg->lock, flags); + + /* Ensure there are no QTDs or URBs left */ + dwc2_kill_urbs_in_qh_list(hsotg, qh_list); + + list_for_each_entry_safe(qh, qh_tmp, qh_list, qh_list_entry) { + dwc2_hcd_qh_unlink(hsotg, qh); + + /* Free each QTD in the QH's QTD list */ + list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, + qtd_list_entry) + dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); + + if (qh->channel && qh->channel->qh == qh) + qh->channel->qh = NULL; + + spin_unlock_irqrestore(&hsotg->lock, flags); + dwc2_hcd_qh_free(hsotg, qh); + spin_lock_irqsave(&hsotg->lock, flags); + } + + spin_unlock_irqrestore(&hsotg->lock, flags); +} + +/* + * Responds with an error status of -ETIMEDOUT to all URBs in the non-periodic + * and periodic schedules. The QTD associated with each URB is removed from + * the schedule and freed. This function may be called when a disconnect is + * detected or when the HCD is being stopped. + * + * Must be called with interrupt disabled and spinlock held + */ +static void dwc2_kill_all_urbs(struct dwc2_hsotg *hsotg) +{ + dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_inactive); + dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_waiting); + dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_active); + dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_inactive); + dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_ready); + dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_assigned); + dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_queued); +} + +/** + * dwc2_hcd_start() - Starts the HCD when switching to Host mode + * + * @hsotg: Pointer to struct dwc2_hsotg + */ +void dwc2_hcd_start(struct dwc2_hsotg *hsotg) +{ + u32 hprt0; + + if (hsotg->op_state == OTG_STATE_B_HOST) { + /* + * Reset the port. During a HNP mode switch the reset + * needs to occur within 1ms and have a duration of at + * least 50ms. + */ + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 |= HPRT0_RST; + dwc2_writel(hsotg, hprt0, HPRT0); + } + + queue_delayed_work(hsotg->wq_otg, &hsotg->start_work, + msecs_to_jiffies(50)); +} + +/* Must be called with interrupt disabled and spinlock held */ +static void dwc2_hcd_cleanup_channels(struct dwc2_hsotg *hsotg) +{ + int num_channels = hsotg->params.host_channels; + struct dwc2_host_chan *channel; + u32 hcchar; + int i; + + if (!hsotg->params.host_dma) { + /* Flush out any channel requests in slave mode */ + for (i = 0; i < num_channels; i++) { + channel = hsotg->hc_ptr_array[i]; + if (!list_empty(&channel->hc_list_entry)) + continue; + hcchar = dwc2_readl(hsotg, HCCHAR(i)); + if (hcchar & HCCHAR_CHENA) { + hcchar &= ~(HCCHAR_CHENA | HCCHAR_EPDIR); + hcchar |= HCCHAR_CHDIS; + dwc2_writel(hsotg, hcchar, HCCHAR(i)); + } + } + } + + for (i = 0; i < num_channels; i++) { + channel = hsotg->hc_ptr_array[i]; + if (!list_empty(&channel->hc_list_entry)) + continue; + hcchar = dwc2_readl(hsotg, HCCHAR(i)); + if (hcchar & HCCHAR_CHENA) { + /* Halt the channel */ + hcchar |= HCCHAR_CHDIS; + dwc2_writel(hsotg, hcchar, HCCHAR(i)); + } + + dwc2_hc_cleanup(hsotg, channel); + list_add_tail(&channel->hc_list_entry, &hsotg->free_hc_list); + /* + * Added for Descriptor DMA to prevent channel double cleanup in + * release_channel_ddma(), which is called from ep_disable when + * device disconnects + */ + channel->qh = NULL; + } + /* All channels have been freed, mark them available */ + if (hsotg->params.uframe_sched) { + hsotg->available_host_channels = + hsotg->params.host_channels; + } else { + hsotg->non_periodic_channels = 0; + hsotg->periodic_channels = 0; + } +} + +/** + * dwc2_hcd_connect() - Handles connect of the HCD + * + * @hsotg: Pointer to struct dwc2_hsotg + * + * Must be called with interrupt disabled and spinlock held + */ +void dwc2_hcd_connect(struct dwc2_hsotg *hsotg) +{ + if (hsotg->lx_state != DWC2_L0) + usb_hcd_resume_root_hub(hsotg->priv); + + hsotg->flags.b.port_connect_status_change = 1; + hsotg->flags.b.port_connect_status = 1; +} + +/** + * dwc2_hcd_disconnect() - Handles disconnect of the HCD + * + * @hsotg: Pointer to struct dwc2_hsotg + * @force: If true, we won't try to reconnect even if we see device connected. + * + * Must be called with interrupt disabled and spinlock held + */ +void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg, bool force) +{ + u32 intr; + u32 hprt0; + + /* Set status flags for the hub driver */ + hsotg->flags.b.port_connect_status_change = 1; + hsotg->flags.b.port_connect_status = 0; + + /* + * Shutdown any transfers in process by clearing the Tx FIFO Empty + * interrupt mask and status bits and disabling subsequent host + * channel interrupts. + */ + intr = dwc2_readl(hsotg, GINTMSK); + intr &= ~(GINTSTS_NPTXFEMP | GINTSTS_PTXFEMP | GINTSTS_HCHINT); + dwc2_writel(hsotg, intr, GINTMSK); + intr = GINTSTS_NPTXFEMP | GINTSTS_PTXFEMP | GINTSTS_HCHINT; + dwc2_writel(hsotg, intr, GINTSTS); + + /* + * Turn off the vbus power only if the core has transitioned to device + * mode. If still in host mode, need to keep power on to detect a + * reconnection. + */ + if (dwc2_is_device_mode(hsotg)) { + if (hsotg->op_state != OTG_STATE_A_SUSPEND) { + dev_dbg(hsotg->dev, "Disconnect: PortPower off\n"); + dwc2_writel(hsotg, 0, HPRT0); + } + + dwc2_disable_host_interrupts(hsotg); + } + + /* Respond with an error status to all URBs in the schedule */ + dwc2_kill_all_urbs(hsotg); + + if (dwc2_is_host_mode(hsotg)) + /* Clean up any host channels that were in use */ + dwc2_hcd_cleanup_channels(hsotg); + + dwc2_host_disconnect(hsotg); + + /* + * Add an extra check here to see if we're actually connected but + * we don't have a detection interrupt pending. This can happen if: + * 1. hardware sees connect + * 2. hardware sees disconnect + * 3. hardware sees connect + * 4. dwc2_port_intr() - clears connect interrupt + * 5. dwc2_handle_common_intr() - calls here + * + * Without the extra check here we will end calling disconnect + * and won't get any future interrupts to handle the connect. + */ + if (!force) { + hprt0 = dwc2_readl(hsotg, HPRT0); + if (!(hprt0 & HPRT0_CONNDET) && (hprt0 & HPRT0_CONNSTS)) + dwc2_hcd_connect(hsotg); + } +} + +/** + * dwc2_hcd_rem_wakeup() - Handles Remote Wakeup + * + * @hsotg: Pointer to struct dwc2_hsotg + */ +static void dwc2_hcd_rem_wakeup(struct dwc2_hsotg *hsotg) +{ + if (hsotg->bus_suspended) { + hsotg->flags.b.port_suspend_change = 1; + usb_hcd_resume_root_hub(hsotg->priv); + } + + if (hsotg->lx_state == DWC2_L1) + hsotg->flags.b.port_l1_change = 1; +} + +/** + * dwc2_hcd_stop() - Halts the DWC_otg host mode operations in a clean manner + * + * @hsotg: Pointer to struct dwc2_hsotg + * + * Must be called with interrupt disabled and spinlock held + */ +void dwc2_hcd_stop(struct dwc2_hsotg *hsotg) +{ + dev_dbg(hsotg->dev, "DWC OTG HCD STOP\n"); + + /* + * The root hub should be disconnected before this function is called. + * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue) + * and the QH lists (via ..._hcd_endpoint_disable). + */ + + /* Turn off all host-specific interrupts */ + dwc2_disable_host_interrupts(hsotg); + + /* Turn off the vbus power */ + dev_dbg(hsotg->dev, "PortPower off\n"); + dwc2_writel(hsotg, 0, HPRT0); +} + +/* Caller must hold driver lock */ +static int dwc2_hcd_urb_enqueue(struct dwc2_hsotg *hsotg, + struct dwc2_hcd_urb *urb, struct dwc2_qh *qh, + struct dwc2_qtd *qtd) +{ + u32 intr_mask; + int retval; + int dev_speed; + + if (!hsotg->flags.b.port_connect_status) { + /* No longer connected */ + dev_err(hsotg->dev, "Not connected\n"); + return -ENODEV; + } + + dev_speed = dwc2_host_get_speed(hsotg, urb->priv); + + /* Some configurations cannot support LS traffic on a FS root port */ + if ((dev_speed == USB_SPEED_LOW) && + (hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED) && + (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI)) { + u32 hprt0 = dwc2_readl(hsotg, HPRT0); + u32 prtspd = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT; + + if (prtspd == HPRT0_SPD_FULL_SPEED) + return -ENODEV; + } + + if (!qtd) + return -EINVAL; + + dwc2_hcd_qtd_init(qtd, urb); + retval = dwc2_hcd_qtd_add(hsotg, qtd, qh); + if (retval) { + dev_err(hsotg->dev, + "DWC OTG HCD URB Enqueue failed adding QTD. Error status %d\n", + retval); + return retval; + } + + intr_mask = dwc2_readl(hsotg, GINTMSK); + if (!(intr_mask & GINTSTS_SOF)) { + enum dwc2_transaction_type tr_type; + + if (qtd->qh->ep_type == USB_ENDPOINT_XFER_BULK && + !(qtd->urb->flags & URB_GIVEBACK_ASAP)) + /* + * Do not schedule SG transactions until qtd has + * URB_GIVEBACK_ASAP set + */ + return 0; + + tr_type = dwc2_hcd_select_transactions(hsotg); + if (tr_type != DWC2_TRANSACTION_NONE) + dwc2_hcd_queue_transactions(hsotg, tr_type); + } + + return 0; +} + +/* Must be called with interrupt disabled and spinlock held */ +static int dwc2_hcd_urb_dequeue(struct dwc2_hsotg *hsotg, + struct dwc2_hcd_urb *urb) +{ + struct dwc2_qh *qh; + struct dwc2_qtd *urb_qtd; + + urb_qtd = urb->qtd; + if (!urb_qtd) { + dev_dbg(hsotg->dev, "## Urb QTD is NULL ##\n"); + return -EINVAL; + } + + qh = urb_qtd->qh; + if (!qh) { + dev_dbg(hsotg->dev, "## Urb QTD QH is NULL ##\n"); + return -EINVAL; + } + + urb->priv = NULL; + + if (urb_qtd->in_process && qh->channel) { + dwc2_dump_channel_info(hsotg, qh->channel); + + /* The QTD is in process (it has been assigned to a channel) */ + if (hsotg->flags.b.port_connect_status) + /* + * If still connected (i.e. in host mode), halt the + * channel so it can be used for other transfers. If + * no longer connected, the host registers can't be + * written to halt the channel since the core is in + * device mode. + */ + dwc2_hc_halt(hsotg, qh->channel, + DWC2_HC_XFER_URB_DEQUEUE); + } + + /* + * Free the QTD and clean up the associated QH. Leave the QH in the + * schedule if it has any remaining QTDs. + */ + if (!hsotg->params.dma_desc_enable) { + u8 in_process = urb_qtd->in_process; + + dwc2_hcd_qtd_unlink_and_free(hsotg, urb_qtd, qh); + if (in_process) { + dwc2_hcd_qh_deactivate(hsotg, qh, 0); + qh->channel = NULL; + } else if (list_empty(&qh->qtd_list)) { + dwc2_hcd_qh_unlink(hsotg, qh); + } + } else { + dwc2_hcd_qtd_unlink_and_free(hsotg, urb_qtd, qh); + } + + return 0; +} + +/* Must NOT be called with interrupt disabled or spinlock held */ +static int dwc2_hcd_endpoint_disable(struct dwc2_hsotg *hsotg, + struct usb_host_endpoint *ep, int retry) +{ + struct dwc2_qtd *qtd, *qtd_tmp; + struct dwc2_qh *qh; + unsigned long flags; + int rc; + + spin_lock_irqsave(&hsotg->lock, flags); + + qh = ep->hcpriv; + if (!qh) { + rc = -EINVAL; + goto err; + } + + while (!list_empty(&qh->qtd_list) && retry--) { + if (retry == 0) { + dev_err(hsotg->dev, + "## timeout in dwc2_hcd_endpoint_disable() ##\n"); + rc = -EBUSY; + goto err; + } + + spin_unlock_irqrestore(&hsotg->lock, flags); + msleep(20); + spin_lock_irqsave(&hsotg->lock, flags); + qh = ep->hcpriv; + if (!qh) { + rc = -EINVAL; + goto err; + } + } + + dwc2_hcd_qh_unlink(hsotg, qh); + + /* Free each QTD in the QH's QTD list */ + list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry) + dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); + + ep->hcpriv = NULL; + + if (qh->channel && qh->channel->qh == qh) + qh->channel->qh = NULL; + + spin_unlock_irqrestore(&hsotg->lock, flags); + + dwc2_hcd_qh_free(hsotg, qh); + + return 0; + +err: + ep->hcpriv = NULL; + spin_unlock_irqrestore(&hsotg->lock, flags); + + return rc; +} + +/* Must be called with interrupt disabled and spinlock held */ +static int dwc2_hcd_endpoint_reset(struct dwc2_hsotg *hsotg, + struct usb_host_endpoint *ep) +{ + struct dwc2_qh *qh = ep->hcpriv; + + if (!qh) + return -EINVAL; + + qh->data_toggle = DWC2_HC_PID_DATA0; + + return 0; +} + +/** + * dwc2_core_init() - Initializes the DWC_otg controller registers and + * prepares the core for device mode or host mode operation + * + * @hsotg: Programming view of the DWC_otg controller + * @initial_setup: If true then this is the first init for this instance. + */ +int dwc2_core_init(struct dwc2_hsotg *hsotg, bool initial_setup) +{ + u32 usbcfg, otgctl; + int retval; + + dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg); + + usbcfg = dwc2_readl(hsotg, GUSBCFG); + + /* Set ULPI External VBUS bit if needed */ + usbcfg &= ~GUSBCFG_ULPI_EXT_VBUS_DRV; + if (hsotg->params.phy_ulpi_ext_vbus) + usbcfg |= GUSBCFG_ULPI_EXT_VBUS_DRV; + + /* Set external TS Dline pulsing bit if needed */ + usbcfg &= ~GUSBCFG_TERMSELDLPULSE; + if (hsotg->params.ts_dline) + usbcfg |= GUSBCFG_TERMSELDLPULSE; + + dwc2_writel(hsotg, usbcfg, GUSBCFG); + + /* + * Reset the Controller + * + * We only need to reset the controller if this is a re-init. + * For the first init we know for sure that earlier code reset us (it + * needed to in order to properly detect various parameters). + */ + if (!initial_setup) { + retval = dwc2_core_reset(hsotg, false); + if (retval) { + dev_err(hsotg->dev, "%s(): Reset failed, aborting\n", + __func__); + return retval; + } + } + + /* + * This needs to happen in FS mode before any other programming occurs + */ + retval = dwc2_phy_init(hsotg, initial_setup); + if (retval) + return retval; + + /* Program the GAHBCFG Register */ + retval = dwc2_gahbcfg_init(hsotg); + if (retval) + return retval; + + /* Program the GUSBCFG register */ + dwc2_gusbcfg_init(hsotg); + + /* Program the GOTGCTL register */ + otgctl = dwc2_readl(hsotg, GOTGCTL); + otgctl &= ~GOTGCTL_OTGVER; + dwc2_writel(hsotg, otgctl, GOTGCTL); + + /* Clear the SRP success bit for FS-I2c */ + hsotg->srp_success = 0; + + /* Enable common interrupts */ + dwc2_enable_common_interrupts(hsotg); + + /* + * Do device or host initialization based on mode during PCD and + * HCD initialization + */ + if (dwc2_is_host_mode(hsotg)) { + dev_dbg(hsotg->dev, "Host Mode\n"); + hsotg->op_state = OTG_STATE_A_HOST; + } else { + dev_dbg(hsotg->dev, "Device Mode\n"); + hsotg->op_state = OTG_STATE_B_PERIPHERAL; + } + + return 0; +} + +/** + * dwc2_core_host_init() - Initializes the DWC_otg controller registers for + * Host mode + * + * @hsotg: Programming view of DWC_otg controller + * + * This function flushes the Tx and Rx FIFOs and flushes any entries in the + * request queues. Host channels are reset to ensure that they are ready for + * performing transfers. + */ +static void dwc2_core_host_init(struct dwc2_hsotg *hsotg) +{ + u32 hcfg, hfir, otgctl, usbcfg; + + dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg); + + /* Set HS/FS Timeout Calibration to 7 (max available value). + * The number of PHY clocks that the application programs in + * this field is added to the high/full speed interpacket timeout + * duration in the core to account for any additional delays + * introduced by the PHY. This can be required, because the delay + * introduced by the PHY in generating the linestate condition + * can vary from one PHY to another. + */ + usbcfg = dwc2_readl(hsotg, GUSBCFG); + usbcfg |= GUSBCFG_TOUTCAL(7); + dwc2_writel(hsotg, usbcfg, GUSBCFG); + + /* Restart the Phy Clock */ + dwc2_writel(hsotg, 0, PCGCTL); + + /* Initialize Host Configuration Register */ + dwc2_init_fs_ls_pclk_sel(hsotg); + if (hsotg->params.speed == DWC2_SPEED_PARAM_FULL || + hsotg->params.speed == DWC2_SPEED_PARAM_LOW) { + hcfg = dwc2_readl(hsotg, HCFG); + hcfg |= HCFG_FSLSSUPP; + dwc2_writel(hsotg, hcfg, HCFG); + } + + /* + * This bit allows dynamic reloading of the HFIR register during + * runtime. This bit needs to be programmed during initial configuration + * and its value must not be changed during runtime. + */ + if (hsotg->params.reload_ctl) { + hfir = dwc2_readl(hsotg, HFIR); + hfir |= HFIR_RLDCTRL; + dwc2_writel(hsotg, hfir, HFIR); + } + + if (hsotg->params.dma_desc_enable) { + u32 op_mode = hsotg->hw_params.op_mode; + + if (hsotg->hw_params.snpsid < DWC2_CORE_REV_2_90a || + !hsotg->hw_params.dma_desc_enable || + op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE || + op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE || + op_mode == GHWCFG2_OP_MODE_UNDEFINED) { + dev_err(hsotg->dev, + "Hardware does not support descriptor DMA mode -\n"); + dev_err(hsotg->dev, + "falling back to buffer DMA mode.\n"); + hsotg->params.dma_desc_enable = false; + } else { + hcfg = dwc2_readl(hsotg, HCFG); + hcfg |= HCFG_DESCDMA; + dwc2_writel(hsotg, hcfg, HCFG); + } + } + + /* Configure data FIFO sizes */ + dwc2_config_fifos(hsotg); + + /* TODO - check this */ + /* Clear Host Set HNP Enable in the OTG Control Register */ + otgctl = dwc2_readl(hsotg, GOTGCTL); + otgctl &= ~GOTGCTL_HSTSETHNPEN; + dwc2_writel(hsotg, otgctl, GOTGCTL); + + /* Make sure the FIFOs are flushed */ + dwc2_flush_tx_fifo(hsotg, 0x10 /* all TX FIFOs */); + dwc2_flush_rx_fifo(hsotg); + + /* Clear Host Set HNP Enable in the OTG Control Register */ + otgctl = dwc2_readl(hsotg, GOTGCTL); + otgctl &= ~GOTGCTL_HSTSETHNPEN; + dwc2_writel(hsotg, otgctl, GOTGCTL); + + if (!hsotg->params.dma_desc_enable) { + int num_channels, i; + u32 hcchar; + + /* Flush out any leftover queued requests */ + num_channels = hsotg->params.host_channels; + for (i = 0; i < num_channels; i++) { + hcchar = dwc2_readl(hsotg, HCCHAR(i)); + if (hcchar & HCCHAR_CHENA) { + hcchar &= ~HCCHAR_CHENA; + hcchar |= HCCHAR_CHDIS; + hcchar &= ~HCCHAR_EPDIR; + dwc2_writel(hsotg, hcchar, HCCHAR(i)); + } + } + + /* Halt all channels to put them into a known state */ + for (i = 0; i < num_channels; i++) { + hcchar = dwc2_readl(hsotg, HCCHAR(i)); + if (hcchar & HCCHAR_CHENA) { + hcchar |= HCCHAR_CHENA | HCCHAR_CHDIS; + hcchar &= ~HCCHAR_EPDIR; + dwc2_writel(hsotg, hcchar, HCCHAR(i)); + dev_dbg(hsotg->dev, "%s: Halt channel %d\n", + __func__, i); + + if (dwc2_hsotg_wait_bit_clear(hsotg, HCCHAR(i), + HCCHAR_CHENA, + 1000)) { + dev_warn(hsotg->dev, + "Unable to clear enable on channel %d\n", + i); + } + } + } + } + + /* Enable ACG feature in host mode, if supported */ + dwc2_enable_acg(hsotg); + + /* Turn on the vbus power */ + dev_dbg(hsotg->dev, "Init: Port Power? op_state=%d\n", hsotg->op_state); + if (hsotg->op_state == OTG_STATE_A_HOST) { + u32 hprt0 = dwc2_read_hprt0(hsotg); + + dev_dbg(hsotg->dev, "Init: Power Port (%d)\n", + !!(hprt0 & HPRT0_PWR)); + if (!(hprt0 & HPRT0_PWR)) { + hprt0 |= HPRT0_PWR; + dwc2_writel(hsotg, hprt0, HPRT0); + } + } + + dwc2_enable_host_interrupts(hsotg); +} + +/* + * Initializes dynamic portions of the DWC_otg HCD state + * + * Must be called with interrupt disabled and spinlock held + */ +static void dwc2_hcd_reinit(struct dwc2_hsotg *hsotg) +{ + struct dwc2_host_chan *chan, *chan_tmp; + int num_channels; + int i; + + hsotg->flags.d32 = 0; + hsotg->non_periodic_qh_ptr = &hsotg->non_periodic_sched_active; + + if (hsotg->params.uframe_sched) { + hsotg->available_host_channels = + hsotg->params.host_channels; + } else { + hsotg->non_periodic_channels = 0; + hsotg->periodic_channels = 0; + } + + /* + * Put all channels in the free channel list and clean up channel + * states + */ + list_for_each_entry_safe(chan, chan_tmp, &hsotg->free_hc_list, + hc_list_entry) + list_del_init(&chan->hc_list_entry); + + num_channels = hsotg->params.host_channels; + for (i = 0; i < num_channels; i++) { + chan = hsotg->hc_ptr_array[i]; + list_add_tail(&chan->hc_list_entry, &hsotg->free_hc_list); + dwc2_hc_cleanup(hsotg, chan); + } + + /* Initialize the DWC core for host mode operation */ + dwc2_core_host_init(hsotg); +} + +static void dwc2_hc_init_split(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, + struct dwc2_qtd *qtd, struct dwc2_hcd_urb *urb) +{ + int hub_addr, hub_port; + + chan->do_split = 1; + chan->xact_pos = qtd->isoc_split_pos; + chan->complete_split = qtd->complete_split; + dwc2_host_hub_info(hsotg, urb->priv, &hub_addr, &hub_port); + chan->hub_addr = (u8)hub_addr; + chan->hub_port = (u8)hub_port; +} + +static void dwc2_hc_init_xfer(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, + struct dwc2_qtd *qtd) +{ + struct dwc2_hcd_urb *urb = qtd->urb; + struct dwc2_hcd_iso_packet_desc *frame_desc; + + switch (dwc2_hcd_get_pipe_type(&urb->pipe_info)) { + case USB_ENDPOINT_XFER_CONTROL: + chan->ep_type = USB_ENDPOINT_XFER_CONTROL; + + switch (qtd->control_phase) { + case DWC2_CONTROL_SETUP: + dev_vdbg(hsotg->dev, " Control setup transaction\n"); + chan->do_ping = 0; + chan->ep_is_in = 0; + chan->data_pid_start = DWC2_HC_PID_SETUP; + if (hsotg->params.host_dma) + chan->xfer_dma = urb->setup_dma; + else + chan->xfer_buf = urb->setup_packet; + chan->xfer_len = 8; + break; + + case DWC2_CONTROL_DATA: + dev_vdbg(hsotg->dev, " Control data transaction\n"); + chan->data_pid_start = qtd->data_toggle; + break; + + case DWC2_CONTROL_STATUS: + /* + * Direction is opposite of data direction or IN if no + * data + */ + dev_vdbg(hsotg->dev, " Control status transaction\n"); + if (urb->length == 0) + chan->ep_is_in = 1; + else + chan->ep_is_in = + dwc2_hcd_is_pipe_out(&urb->pipe_info); + if (chan->ep_is_in) + chan->do_ping = 0; + chan->data_pid_start = DWC2_HC_PID_DATA1; + chan->xfer_len = 0; + if (hsotg->params.host_dma) + chan->xfer_dma = hsotg->status_buf_dma; + else + chan->xfer_buf = hsotg->status_buf; + break; + } + break; + + case USB_ENDPOINT_XFER_BULK: + chan->ep_type = USB_ENDPOINT_XFER_BULK; + break; + + case USB_ENDPOINT_XFER_INT: + chan->ep_type = USB_ENDPOINT_XFER_INT; + break; + + case USB_ENDPOINT_XFER_ISOC: + chan->ep_type = USB_ENDPOINT_XFER_ISOC; + if (hsotg->params.dma_desc_enable) + break; + + frame_desc = &urb->iso_descs[qtd->isoc_frame_index]; + frame_desc->status = 0; + + if (hsotg->params.host_dma) { + chan->xfer_dma = urb->dma; + chan->xfer_dma += frame_desc->offset + + qtd->isoc_split_offset; + } else { + chan->xfer_buf = urb->buf; + chan->xfer_buf += frame_desc->offset + + qtd->isoc_split_offset; + } + + chan->xfer_len = frame_desc->length - qtd->isoc_split_offset; + + if (chan->xact_pos == DWC2_HCSPLT_XACTPOS_ALL) { + if (chan->xfer_len <= 188) + chan->xact_pos = DWC2_HCSPLT_XACTPOS_ALL; + else + chan->xact_pos = DWC2_HCSPLT_XACTPOS_BEGIN; + } + break; + } +} + +static int dwc2_alloc_split_dma_aligned_buf(struct dwc2_hsotg *hsotg, + struct dwc2_qh *qh, + struct dwc2_host_chan *chan) +{ + if (!hsotg->unaligned_cache || + chan->max_packet > DWC2_KMEM_UNALIGNED_BUF_SIZE) + return -ENOMEM; + + if (!qh->dw_align_buf) { + qh->dw_align_buf = kmem_cache_alloc(hsotg->unaligned_cache, + GFP_ATOMIC | GFP_DMA); + if (!qh->dw_align_buf) + return -ENOMEM; + } + + qh->dw_align_buf_dma = dma_map_single(hsotg->dev, qh->dw_align_buf, + DWC2_KMEM_UNALIGNED_BUF_SIZE, + DMA_FROM_DEVICE); + + if (dma_mapping_error(hsotg->dev, qh->dw_align_buf_dma)) { + dev_err(hsotg->dev, "can't map align_buf\n"); + chan->align_buf = 0; + return -EINVAL; + } + + chan->align_buf = qh->dw_align_buf_dma; + return 0; +} + +#define DWC2_USB_DMA_ALIGN 4 + +static void dwc2_free_dma_aligned_buffer(struct urb *urb) +{ + void *stored_xfer_buffer; + size_t length; + + if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER)) + return; + + /* Restore urb->transfer_buffer from the end of the allocated area */ + memcpy(&stored_xfer_buffer, + PTR_ALIGN(urb->transfer_buffer + urb->transfer_buffer_length, + dma_get_cache_alignment()), + sizeof(urb->transfer_buffer)); + + if (usb_urb_dir_in(urb)) { + if (usb_pipeisoc(urb->pipe)) + length = urb->transfer_buffer_length; + else + length = urb->actual_length; + + memcpy(stored_xfer_buffer, urb->transfer_buffer, length); + } + kfree(urb->transfer_buffer); + urb->transfer_buffer = stored_xfer_buffer; + + urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER; +} + +static int dwc2_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags) +{ + void *kmalloc_ptr; + size_t kmalloc_size; + + if (urb->num_sgs || urb->sg || + urb->transfer_buffer_length == 0 || + !((uintptr_t)urb->transfer_buffer & (DWC2_USB_DMA_ALIGN - 1))) + return 0; + + /* + * Allocate a buffer with enough padding for original transfer_buffer + * pointer. This allocation is guaranteed to be aligned properly for + * DMA + */ + kmalloc_size = urb->transfer_buffer_length + + (dma_get_cache_alignment() - 1) + + sizeof(urb->transfer_buffer); + + kmalloc_ptr = kmalloc(kmalloc_size, mem_flags); + if (!kmalloc_ptr) + return -ENOMEM; + + /* + * Position value of original urb->transfer_buffer pointer to the end + * of allocation for later referencing + */ + memcpy(PTR_ALIGN(kmalloc_ptr + urb->transfer_buffer_length, + dma_get_cache_alignment()), + &urb->transfer_buffer, sizeof(urb->transfer_buffer)); + + if (usb_urb_dir_out(urb)) + memcpy(kmalloc_ptr, urb->transfer_buffer, + urb->transfer_buffer_length); + urb->transfer_buffer = kmalloc_ptr; + + urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER; + + return 0; +} + +static int dwc2_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, + gfp_t mem_flags) +{ + int ret; + + /* We assume setup_dma is always aligned; warn if not */ + WARN_ON_ONCE(urb->setup_dma && + (urb->setup_dma & (DWC2_USB_DMA_ALIGN - 1))); + + ret = dwc2_alloc_dma_aligned_buffer(urb, mem_flags); + if (ret) + return ret; + + ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags); + if (ret) + dwc2_free_dma_aligned_buffer(urb); + + return ret; +} + +static void dwc2_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) +{ + usb_hcd_unmap_urb_for_dma(hcd, urb); + dwc2_free_dma_aligned_buffer(urb); +} + +/** + * dwc2_assign_and_init_hc() - Assigns transactions from a QTD to a free host + * channel and initializes the host channel to perform the transactions. The + * host channel is removed from the free list. + * + * @hsotg: The HCD state structure + * @qh: Transactions from the first QTD for this QH are selected and assigned + * to a free host channel + */ +static int dwc2_assign_and_init_hc(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) +{ + struct dwc2_host_chan *chan; + struct dwc2_hcd_urb *urb; + struct dwc2_qtd *qtd; + + if (dbg_qh(qh)) + dev_vdbg(hsotg->dev, "%s(%p,%p)\n", __func__, hsotg, qh); + + if (list_empty(&qh->qtd_list)) { + dev_dbg(hsotg->dev, "No QTDs in QH list\n"); + return -ENOMEM; + } + + if (list_empty(&hsotg->free_hc_list)) { + dev_dbg(hsotg->dev, "No free channel to assign\n"); + return -ENOMEM; + } + + chan = list_first_entry(&hsotg->free_hc_list, struct dwc2_host_chan, + hc_list_entry); + + /* Remove host channel from free list */ + list_del_init(&chan->hc_list_entry); + + qtd = list_first_entry(&qh->qtd_list, struct dwc2_qtd, qtd_list_entry); + urb = qtd->urb; + qh->channel = chan; + qtd->in_process = 1; + + /* + * Use usb_pipedevice to determine device address. This address is + * 0 before the SET_ADDRESS command and the correct address afterward. + */ + chan->dev_addr = dwc2_hcd_get_dev_addr(&urb->pipe_info); + chan->ep_num = dwc2_hcd_get_ep_num(&urb->pipe_info); + chan->speed = qh->dev_speed; + chan->max_packet = qh->maxp; + + chan->xfer_started = 0; + chan->halt_status = DWC2_HC_XFER_NO_HALT_STATUS; + chan->error_state = (qtd->error_count > 0); + chan->halt_on_queue = 0; + chan->halt_pending = 0; + chan->requests = 0; + + /* + * The following values may be modified in the transfer type section + * below. The xfer_len value may be reduced when the transfer is + * started to accommodate the max widths of the XferSize and PktCnt + * fields in the HCTSIZn register. + */ + + chan->ep_is_in = (dwc2_hcd_is_pipe_in(&urb->pipe_info) != 0); + if (chan->ep_is_in) + chan->do_ping = 0; + else + chan->do_ping = qh->ping_state; + + chan->data_pid_start = qh->data_toggle; + chan->multi_count = 1; + + if (urb->actual_length > urb->length && + !dwc2_hcd_is_pipe_in(&urb->pipe_info)) + urb->actual_length = urb->length; + + if (hsotg->params.host_dma) + chan->xfer_dma = urb->dma + urb->actual_length; + else + chan->xfer_buf = (u8 *)urb->buf + urb->actual_length; + + chan->xfer_len = urb->length - urb->actual_length; + chan->xfer_count = 0; + + /* Set the split attributes if required */ + if (qh->do_split) + dwc2_hc_init_split(hsotg, chan, qtd, urb); + else + chan->do_split = 0; + + /* Set the transfer attributes */ + dwc2_hc_init_xfer(hsotg, chan, qtd); + + /* For non-dword aligned buffers */ + if (hsotg->params.host_dma && qh->do_split && + chan->ep_is_in && (chan->xfer_dma & 0x3)) { + dev_vdbg(hsotg->dev, "Non-aligned buffer\n"); + if (dwc2_alloc_split_dma_aligned_buf(hsotg, qh, chan)) { + dev_err(hsotg->dev, + "Failed to allocate memory to handle non-aligned buffer\n"); + /* Add channel back to free list */ + chan->align_buf = 0; + chan->multi_count = 0; + list_add_tail(&chan->hc_list_entry, + &hsotg->free_hc_list); + qtd->in_process = 0; + qh->channel = NULL; + return -ENOMEM; + } + } else { + /* + * We assume that DMA is always aligned in non-split + * case or split out case. Warn if not. + */ + WARN_ON_ONCE(hsotg->params.host_dma && + (chan->xfer_dma & 0x3)); + chan->align_buf = 0; + } + + if (chan->ep_type == USB_ENDPOINT_XFER_INT || + chan->ep_type == USB_ENDPOINT_XFER_ISOC) + /* + * This value may be modified when the transfer is started + * to reflect the actual transfer length + */ + chan->multi_count = qh->maxp_mult; + + if (hsotg->params.dma_desc_enable) { + chan->desc_list_addr = qh->desc_list_dma; + chan->desc_list_sz = qh->desc_list_sz; + } + + dwc2_hc_init(hsotg, chan); + chan->qh = qh; + + return 0; +} + +/** + * dwc2_hcd_select_transactions() - Selects transactions from the HCD transfer + * schedule and assigns them to available host channels. Called from the HCD + * interrupt handler functions. + * + * @hsotg: The HCD state structure + * + * Return: The types of new transactions that were assigned to host channels + */ +enum dwc2_transaction_type dwc2_hcd_select_transactions( + struct dwc2_hsotg *hsotg) +{ + enum dwc2_transaction_type ret_val = DWC2_TRANSACTION_NONE; + struct list_head *qh_ptr; + struct dwc2_qh *qh; + int num_channels; + +#ifdef DWC2_DEBUG_SOF + dev_vdbg(hsotg->dev, " Select Transactions\n"); +#endif + + /* Process entries in the periodic ready list */ + qh_ptr = hsotg->periodic_sched_ready.next; + while (qh_ptr != &hsotg->periodic_sched_ready) { + if (list_empty(&hsotg->free_hc_list)) + break; + if (hsotg->params.uframe_sched) { + if (hsotg->available_host_channels <= 1) + break; + hsotg->available_host_channels--; + } + qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry); + if (dwc2_assign_and_init_hc(hsotg, qh)) + break; + + /* + * Move the QH from the periodic ready schedule to the + * periodic assigned schedule + */ + qh_ptr = qh_ptr->next; + list_move_tail(&qh->qh_list_entry, + &hsotg->periodic_sched_assigned); + ret_val = DWC2_TRANSACTION_PERIODIC; + } + + /* + * Process entries in the inactive portion of the non-periodic + * schedule. Some free host channels may not be used if they are + * reserved for periodic transfers. + */ + num_channels = hsotg->params.host_channels; + qh_ptr = hsotg->non_periodic_sched_inactive.next; + while (qh_ptr != &hsotg->non_periodic_sched_inactive) { + if (!hsotg->params.uframe_sched && + hsotg->non_periodic_channels >= num_channels - + hsotg->periodic_channels) + break; + if (list_empty(&hsotg->free_hc_list)) + break; + qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry); + if (hsotg->params.uframe_sched) { + if (hsotg->available_host_channels < 1) + break; + hsotg->available_host_channels--; + } + + if (dwc2_assign_and_init_hc(hsotg, qh)) + break; + + /* + * Move the QH from the non-periodic inactive schedule to the + * non-periodic active schedule + */ + qh_ptr = qh_ptr->next; + list_move_tail(&qh->qh_list_entry, + &hsotg->non_periodic_sched_active); + + if (ret_val == DWC2_TRANSACTION_NONE) + ret_val = DWC2_TRANSACTION_NON_PERIODIC; + else + ret_val = DWC2_TRANSACTION_ALL; + + if (!hsotg->params.uframe_sched) + hsotg->non_periodic_channels++; + } + + return ret_val; +} + +/** + * dwc2_queue_transaction() - Attempts to queue a single transaction request for + * a host channel associated with either a periodic or non-periodic transfer + * + * @hsotg: The HCD state structure + * @chan: Host channel descriptor associated with either a periodic or + * non-periodic transfer + * @fifo_dwords_avail: Number of DWORDs available in the periodic Tx FIFO + * for periodic transfers or the non-periodic Tx FIFO + * for non-periodic transfers + * + * Return: 1 if a request is queued and more requests may be needed to + * complete the transfer, 0 if no more requests are required for this + * transfer, -1 if there is insufficient space in the Tx FIFO + * + * This function assumes that there is space available in the appropriate + * request queue. For an OUT transfer or SETUP transaction in Slave mode, + * it checks whether space is available in the appropriate Tx FIFO. + * + * Must be called with interrupt disabled and spinlock held + */ +static int dwc2_queue_transaction(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, + u16 fifo_dwords_avail) +{ + int retval = 0; + + if (chan->do_split) + /* Put ourselves on the list to keep order straight */ + list_move_tail(&chan->split_order_list_entry, + &hsotg->split_order); + + if (hsotg->params.host_dma && chan->qh) { + if (hsotg->params.dma_desc_enable) { + if (!chan->xfer_started || + chan->ep_type == USB_ENDPOINT_XFER_ISOC) { + dwc2_hcd_start_xfer_ddma(hsotg, chan->qh); + chan->qh->ping_state = 0; + } + } else if (!chan->xfer_started) { + dwc2_hc_start_transfer(hsotg, chan); + chan->qh->ping_state = 0; + } + } else if (chan->halt_pending) { + /* Don't queue a request if the channel has been halted */ + } else if (chan->halt_on_queue) { + dwc2_hc_halt(hsotg, chan, chan->halt_status); + } else if (chan->do_ping) { + if (!chan->xfer_started) + dwc2_hc_start_transfer(hsotg, chan); + } else if (!chan->ep_is_in || + chan->data_pid_start == DWC2_HC_PID_SETUP) { + if ((fifo_dwords_avail * 4) >= chan->max_packet) { + if (!chan->xfer_started) { + dwc2_hc_start_transfer(hsotg, chan); + retval = 1; + } else { + retval = dwc2_hc_continue_transfer(hsotg, chan); + } + } else { + retval = -1; + } + } else { + if (!chan->xfer_started) { + dwc2_hc_start_transfer(hsotg, chan); + retval = 1; + } else { + retval = dwc2_hc_continue_transfer(hsotg, chan); + } + } + + return retval; +} + +/* + * Processes periodic channels for the next frame and queues transactions for + * these channels to the DWC_otg controller. After queueing transactions, the + * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions + * to queue as Periodic Tx FIFO or request queue space becomes available. + * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled. + * + * Must be called with interrupt disabled and spinlock held + */ +static void dwc2_process_periodic_channels(struct dwc2_hsotg *hsotg) +{ + struct list_head *qh_ptr; + struct dwc2_qh *qh; + u32 tx_status; + u32 fspcavail; + u32 gintmsk; + int status; + bool no_queue_space = false; + bool no_fifo_space = false; + u32 qspcavail; + + /* If empty list then just adjust interrupt enables */ + if (list_empty(&hsotg->periodic_sched_assigned)) + goto exit; + + if (dbg_perio()) + dev_vdbg(hsotg->dev, "Queue periodic transactions\n"); + + tx_status = dwc2_readl(hsotg, HPTXSTS); + qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> + TXSTS_QSPCAVAIL_SHIFT; + fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> + TXSTS_FSPCAVAIL_SHIFT; + + if (dbg_perio()) { + dev_vdbg(hsotg->dev, " P Tx Req Queue Space Avail (before queue): %d\n", + qspcavail); + dev_vdbg(hsotg->dev, " P Tx FIFO Space Avail (before queue): %d\n", + fspcavail); + } + + qh_ptr = hsotg->periodic_sched_assigned.next; + while (qh_ptr != &hsotg->periodic_sched_assigned) { + tx_status = dwc2_readl(hsotg, HPTXSTS); + qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> + TXSTS_QSPCAVAIL_SHIFT; + if (qspcavail == 0) { + no_queue_space = true; + break; + } + + qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry); + if (!qh->channel) { + qh_ptr = qh_ptr->next; + continue; + } + + /* Make sure EP's TT buffer is clean before queueing qtds */ + if (qh->tt_buffer_dirty) { + qh_ptr = qh_ptr->next; + continue; + } + + /* + * Set a flag if we're queuing high-bandwidth in slave mode. + * The flag prevents any halts to get into the request queue in + * the middle of multiple high-bandwidth packets getting queued. + */ + if (!hsotg->params.host_dma && + qh->channel->multi_count > 1) + hsotg->queuing_high_bandwidth = 1; + + fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> + TXSTS_FSPCAVAIL_SHIFT; + status = dwc2_queue_transaction(hsotg, qh->channel, fspcavail); + if (status < 0) { + no_fifo_space = true; + break; + } + + /* + * In Slave mode, stay on the current transfer until there is + * nothing more to do or the high-bandwidth request count is + * reached. In DMA mode, only need to queue one request. The + * controller automatically handles multiple packets for + * high-bandwidth transfers. + */ + if (hsotg->params.host_dma || status == 0 || + qh->channel->requests == qh->channel->multi_count) { + qh_ptr = qh_ptr->next; + /* + * Move the QH from the periodic assigned schedule to + * the periodic queued schedule + */ + list_move_tail(&qh->qh_list_entry, + &hsotg->periodic_sched_queued); + + /* done queuing high bandwidth */ + hsotg->queuing_high_bandwidth = 0; + } + } + +exit: + if (no_queue_space || no_fifo_space || + (!hsotg->params.host_dma && + !list_empty(&hsotg->periodic_sched_assigned))) { + /* + * May need to queue more transactions as the request + * queue or Tx FIFO empties. Enable the periodic Tx + * FIFO empty interrupt. (Always use the half-empty + * level to ensure that new requests are loaded as + * soon as possible.) + */ + gintmsk = dwc2_readl(hsotg, GINTMSK); + if (!(gintmsk & GINTSTS_PTXFEMP)) { + gintmsk |= GINTSTS_PTXFEMP; + dwc2_writel(hsotg, gintmsk, GINTMSK); + } + } else { + /* + * Disable the Tx FIFO empty interrupt since there are + * no more transactions that need to be queued right + * now. This function is called from interrupt + * handlers to queue more transactions as transfer + * states change. + */ + gintmsk = dwc2_readl(hsotg, GINTMSK); + if (gintmsk & GINTSTS_PTXFEMP) { + gintmsk &= ~GINTSTS_PTXFEMP; + dwc2_writel(hsotg, gintmsk, GINTMSK); + } + } +} + +/* + * Processes active non-periodic channels and queues transactions for these + * channels to the DWC_otg controller. After queueing transactions, the NP Tx + * FIFO Empty interrupt is enabled if there are more transactions to queue as + * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx + * FIFO Empty interrupt is disabled. + * + * Must be called with interrupt disabled and spinlock held + */ +static void dwc2_process_non_periodic_channels(struct dwc2_hsotg *hsotg) +{ + struct list_head *orig_qh_ptr; + struct dwc2_qh *qh; + u32 tx_status; + u32 qspcavail; + u32 fspcavail; + u32 gintmsk; + int status; + int no_queue_space = 0; + int no_fifo_space = 0; + int more_to_do = 0; + + dev_vdbg(hsotg->dev, "Queue non-periodic transactions\n"); + + tx_status = dwc2_readl(hsotg, GNPTXSTS); + qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> + TXSTS_QSPCAVAIL_SHIFT; + fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> + TXSTS_FSPCAVAIL_SHIFT; + dev_vdbg(hsotg->dev, " NP Tx Req Queue Space Avail (before queue): %d\n", + qspcavail); + dev_vdbg(hsotg->dev, " NP Tx FIFO Space Avail (before queue): %d\n", + fspcavail); + + /* + * Keep track of the starting point. Skip over the start-of-list + * entry. + */ + if (hsotg->non_periodic_qh_ptr == &hsotg->non_periodic_sched_active) + hsotg->non_periodic_qh_ptr = hsotg->non_periodic_qh_ptr->next; + orig_qh_ptr = hsotg->non_periodic_qh_ptr; + + /* + * Process once through the active list or until no more space is + * available in the request queue or the Tx FIFO + */ + do { + tx_status = dwc2_readl(hsotg, GNPTXSTS); + qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> + TXSTS_QSPCAVAIL_SHIFT; + if (!hsotg->params.host_dma && qspcavail == 0) { + no_queue_space = 1; + break; + } + + qh = list_entry(hsotg->non_periodic_qh_ptr, struct dwc2_qh, + qh_list_entry); + if (!qh->channel) + goto next; + + /* Make sure EP's TT buffer is clean before queueing qtds */ + if (qh->tt_buffer_dirty) + goto next; + + fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> + TXSTS_FSPCAVAIL_SHIFT; + status = dwc2_queue_transaction(hsotg, qh->channel, fspcavail); + + if (status > 0) { + more_to_do = 1; + } else if (status < 0) { + no_fifo_space = 1; + break; + } +next: + /* Advance to next QH, skipping start-of-list entry */ + hsotg->non_periodic_qh_ptr = hsotg->non_periodic_qh_ptr->next; + if (hsotg->non_periodic_qh_ptr == + &hsotg->non_periodic_sched_active) + hsotg->non_periodic_qh_ptr = + hsotg->non_periodic_qh_ptr->next; + } while (hsotg->non_periodic_qh_ptr != orig_qh_ptr); + + if (!hsotg->params.host_dma) { + tx_status = dwc2_readl(hsotg, GNPTXSTS); + qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> + TXSTS_QSPCAVAIL_SHIFT; + fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> + TXSTS_FSPCAVAIL_SHIFT; + dev_vdbg(hsotg->dev, + " NP Tx Req Queue Space Avail (after queue): %d\n", + qspcavail); + dev_vdbg(hsotg->dev, + " NP Tx FIFO Space Avail (after queue): %d\n", + fspcavail); + + if (more_to_do || no_queue_space || no_fifo_space) { + /* + * May need to queue more transactions as the request + * queue or Tx FIFO empties. Enable the non-periodic + * Tx FIFO empty interrupt. (Always use the half-empty + * level to ensure that new requests are loaded as + * soon as possible.) + */ + gintmsk = dwc2_readl(hsotg, GINTMSK); + gintmsk |= GINTSTS_NPTXFEMP; + dwc2_writel(hsotg, gintmsk, GINTMSK); + } else { + /* + * Disable the Tx FIFO empty interrupt since there are + * no more transactions that need to be queued right + * now. This function is called from interrupt + * handlers to queue more transactions as transfer + * states change. + */ + gintmsk = dwc2_readl(hsotg, GINTMSK); + gintmsk &= ~GINTSTS_NPTXFEMP; + dwc2_writel(hsotg, gintmsk, GINTMSK); + } + } +} + +/** + * dwc2_hcd_queue_transactions() - Processes the currently active host channels + * and queues transactions for these channels to the DWC_otg controller. Called + * from the HCD interrupt handler functions. + * + * @hsotg: The HCD state structure + * @tr_type: The type(s) of transactions to queue (non-periodic, periodic, + * or both) + * + * Must be called with interrupt disabled and spinlock held + */ +void dwc2_hcd_queue_transactions(struct dwc2_hsotg *hsotg, + enum dwc2_transaction_type tr_type) +{ +#ifdef DWC2_DEBUG_SOF + dev_vdbg(hsotg->dev, "Queue Transactions\n"); +#endif + /* Process host channels associated with periodic transfers */ + if (tr_type == DWC2_TRANSACTION_PERIODIC || + tr_type == DWC2_TRANSACTION_ALL) + dwc2_process_periodic_channels(hsotg); + + /* Process host channels associated with non-periodic transfers */ + if (tr_type == DWC2_TRANSACTION_NON_PERIODIC || + tr_type == DWC2_TRANSACTION_ALL) { + if (!list_empty(&hsotg->non_periodic_sched_active)) { + dwc2_process_non_periodic_channels(hsotg); + } else { + /* + * Ensure NP Tx FIFO empty interrupt is disabled when + * there are no non-periodic transfers to process + */ + u32 gintmsk = dwc2_readl(hsotg, GINTMSK); + + gintmsk &= ~GINTSTS_NPTXFEMP; + dwc2_writel(hsotg, gintmsk, GINTMSK); + } + } +} + +static void dwc2_conn_id_status_change(struct work_struct *work) +{ + struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg, + wf_otg); + u32 count = 0; + u32 gotgctl; + unsigned long flags; + + dev_dbg(hsotg->dev, "%s()\n", __func__); + + gotgctl = dwc2_readl(hsotg, GOTGCTL); + dev_dbg(hsotg->dev, "gotgctl=%0x\n", gotgctl); + dev_dbg(hsotg->dev, "gotgctl.b.conidsts=%d\n", + !!(gotgctl & GOTGCTL_CONID_B)); + + /* B-Device connector (Device Mode) */ + if (gotgctl & GOTGCTL_CONID_B) { + dwc2_vbus_supply_exit(hsotg); + /* Wait for switch to device mode */ + dev_dbg(hsotg->dev, "connId B\n"); + if (hsotg->bus_suspended) { + dev_info(hsotg->dev, + "Do port resume before switching to device mode\n"); + dwc2_port_resume(hsotg); + } + while (!dwc2_is_device_mode(hsotg)) { + dev_info(hsotg->dev, + "Waiting for Peripheral Mode, Mode=%s\n", + dwc2_is_host_mode(hsotg) ? "Host" : + "Peripheral"); + msleep(20); + /* + * Sometimes the initial GOTGCTRL read is wrong, so + * check it again and jump to host mode if that was + * the case. + */ + gotgctl = dwc2_readl(hsotg, GOTGCTL); + if (!(gotgctl & GOTGCTL_CONID_B)) + goto host; + if (++count > 250) + break; + } + if (count > 250) + dev_err(hsotg->dev, + "Connection id status change timed out\n"); + + /* + * Exit Partial Power Down without restoring registers. + * No need to check the return value as registers + * are not being restored. + */ + if (hsotg->in_ppd && hsotg->lx_state == DWC2_L2) + dwc2_exit_partial_power_down(hsotg, 0, false); + + hsotg->op_state = OTG_STATE_B_PERIPHERAL; + dwc2_core_init(hsotg, false); + dwc2_enable_global_interrupts(hsotg); + spin_lock_irqsave(&hsotg->lock, flags); + dwc2_hsotg_core_init_disconnected(hsotg, false); + spin_unlock_irqrestore(&hsotg->lock, flags); + /* Enable ACG feature in device mode,if supported */ + dwc2_enable_acg(hsotg); + dwc2_hsotg_core_connect(hsotg); + } else { +host: + /* A-Device connector (Host Mode) */ + dev_dbg(hsotg->dev, "connId A\n"); + while (!dwc2_is_host_mode(hsotg)) { + dev_info(hsotg->dev, "Waiting for Host Mode, Mode=%s\n", + dwc2_is_host_mode(hsotg) ? + "Host" : "Peripheral"); + msleep(20); + if (++count > 250) + break; + } + if (count > 250) + dev_err(hsotg->dev, + "Connection id status change timed out\n"); + + spin_lock_irqsave(&hsotg->lock, flags); + dwc2_hsotg_disconnect(hsotg); + spin_unlock_irqrestore(&hsotg->lock, flags); + + hsotg->op_state = OTG_STATE_A_HOST; + /* Initialize the Core for Host mode */ + dwc2_core_init(hsotg, false); + dwc2_enable_global_interrupts(hsotg); + dwc2_hcd_start(hsotg); + } +} + +static void dwc2_wakeup_detected(struct timer_list *t) +{ + struct dwc2_hsotg *hsotg = from_timer(hsotg, t, wkp_timer); + u32 hprt0; + + dev_dbg(hsotg->dev, "%s()\n", __func__); + + /* + * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms + * so that OPT tests pass with all PHYs.) + */ + hprt0 = dwc2_read_hprt0(hsotg); + dev_dbg(hsotg->dev, "Resume: HPRT0=%0x\n", hprt0); + hprt0 &= ~HPRT0_RES; + dwc2_writel(hsotg, hprt0, HPRT0); + dev_dbg(hsotg->dev, "Clear Resume: HPRT0=%0x\n", + dwc2_readl(hsotg, HPRT0)); + + dwc2_hcd_rem_wakeup(hsotg); + hsotg->bus_suspended = false; + + /* Change to L0 state */ + hsotg->lx_state = DWC2_L0; +} + +static int dwc2_host_is_b_hnp_enabled(struct dwc2_hsotg *hsotg) +{ + struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg); + + return hcd->self.b_hnp_enable; +} + +/** + * dwc2_port_suspend() - Put controller in suspend mode for host. + * + * @hsotg: Programming view of the DWC_otg controller + * @windex: The control request wIndex field + * + * Return: non-zero if failed to enter suspend mode for host. + * + * This function is for entering Host mode suspend. + * Must NOT be called with interrupt disabled or spinlock held. + */ +int dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex) +{ + unsigned long flags; + u32 pcgctl; + u32 gotgctl; + int ret = 0; + + dev_dbg(hsotg->dev, "%s()\n", __func__); + + spin_lock_irqsave(&hsotg->lock, flags); + + if (windex == hsotg->otg_port && dwc2_host_is_b_hnp_enabled(hsotg)) { + gotgctl = dwc2_readl(hsotg, GOTGCTL); + gotgctl |= GOTGCTL_HSTSETHNPEN; + dwc2_writel(hsotg, gotgctl, GOTGCTL); + hsotg->op_state = OTG_STATE_A_SUSPEND; + } + + switch (hsotg->params.power_down) { + case DWC2_POWER_DOWN_PARAM_PARTIAL: + ret = dwc2_enter_partial_power_down(hsotg); + if (ret) + dev_err(hsotg->dev, + "enter partial_power_down failed.\n"); + break; + case DWC2_POWER_DOWN_PARAM_HIBERNATION: + /* + * Perform spin unlock and lock because in + * "dwc2_host_enter_hibernation()" function there is a spinlock + * logic which prevents servicing of any IRQ during entering + * hibernation. + */ + spin_unlock_irqrestore(&hsotg->lock, flags); + ret = dwc2_enter_hibernation(hsotg, 1); + if (ret) + dev_err(hsotg->dev, "enter hibernation failed.\n"); + spin_lock_irqsave(&hsotg->lock, flags); + break; + case DWC2_POWER_DOWN_PARAM_NONE: + /* + * If not hibernation nor partial power down are supported, + * clock gating is used to save power. + */ + if (!hsotg->params.no_clock_gating) + dwc2_host_enter_clock_gating(hsotg); + break; + } + + /* For HNP the bus must be suspended for at least 200ms */ + if (dwc2_host_is_b_hnp_enabled(hsotg)) { + pcgctl = dwc2_readl(hsotg, PCGCTL); + pcgctl &= ~PCGCTL_STOPPCLK; + dwc2_writel(hsotg, pcgctl, PCGCTL); + + spin_unlock_irqrestore(&hsotg->lock, flags); + + msleep(200); + } else { + spin_unlock_irqrestore(&hsotg->lock, flags); + } + + return ret; +} + +/** + * dwc2_port_resume() - Exit controller from suspend mode for host. + * + * @hsotg: Programming view of the DWC_otg controller + * + * Return: non-zero if failed to exit suspend mode for host. + * + * This function is for exiting Host mode suspend. + * Must NOT be called with interrupt disabled or spinlock held. + */ +int dwc2_port_resume(struct dwc2_hsotg *hsotg) +{ + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&hsotg->lock, flags); + + switch (hsotg->params.power_down) { + case DWC2_POWER_DOWN_PARAM_PARTIAL: + ret = dwc2_exit_partial_power_down(hsotg, 0, true); + if (ret) + dev_err(hsotg->dev, + "exit partial_power_down failed.\n"); + break; + case DWC2_POWER_DOWN_PARAM_HIBERNATION: + /* Exit host hibernation. */ + ret = dwc2_exit_hibernation(hsotg, 0, 0, 1); + if (ret) + dev_err(hsotg->dev, "exit hibernation failed.\n"); + break; + case DWC2_POWER_DOWN_PARAM_NONE: + /* + * If not hibernation nor partial power down are supported, + * port resume is done using the clock gating programming flow. + */ + spin_unlock_irqrestore(&hsotg->lock, flags); + dwc2_host_exit_clock_gating(hsotg, 0); + spin_lock_irqsave(&hsotg->lock, flags); + break; + } + + spin_unlock_irqrestore(&hsotg->lock, flags); + + return ret; +} + +/* Handles hub class-specific requests */ +static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq, + u16 wvalue, u16 windex, char *buf, u16 wlength) +{ + struct usb_hub_descriptor *hub_desc; + int retval = 0; + u32 hprt0; + u32 port_status; + u32 speed; + u32 pcgctl; + u32 pwr; + + switch (typereq) { + case ClearHubFeature: + dev_dbg(hsotg->dev, "ClearHubFeature %1xh\n", wvalue); + + switch (wvalue) { + case C_HUB_LOCAL_POWER: + case C_HUB_OVER_CURRENT: + /* Nothing required here */ + break; + + default: + retval = -EINVAL; + dev_err(hsotg->dev, + "ClearHubFeature request %1xh unknown\n", + wvalue); + } + break; + + case ClearPortFeature: + if (wvalue != USB_PORT_FEAT_L1) + if (!windex || windex > 1) + goto error; + switch (wvalue) { + case USB_PORT_FEAT_ENABLE: + dev_dbg(hsotg->dev, + "ClearPortFeature USB_PORT_FEAT_ENABLE\n"); + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 |= HPRT0_ENA; + dwc2_writel(hsotg, hprt0, HPRT0); + break; + + case USB_PORT_FEAT_SUSPEND: + dev_dbg(hsotg->dev, + "ClearPortFeature USB_PORT_FEAT_SUSPEND\n"); + + if (hsotg->bus_suspended) + retval = dwc2_port_resume(hsotg); + break; + + case USB_PORT_FEAT_POWER: + dev_dbg(hsotg->dev, + "ClearPortFeature USB_PORT_FEAT_POWER\n"); + hprt0 = dwc2_read_hprt0(hsotg); + pwr = hprt0 & HPRT0_PWR; + hprt0 &= ~HPRT0_PWR; + dwc2_writel(hsotg, hprt0, HPRT0); + if (pwr) + dwc2_vbus_supply_exit(hsotg); + break; + + case USB_PORT_FEAT_INDICATOR: + dev_dbg(hsotg->dev, + "ClearPortFeature USB_PORT_FEAT_INDICATOR\n"); + /* Port indicator not supported */ + break; + + case USB_PORT_FEAT_C_CONNECTION: + /* + * Clears driver's internal Connect Status Change flag + */ + dev_dbg(hsotg->dev, + "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n"); + hsotg->flags.b.port_connect_status_change = 0; + break; + + case USB_PORT_FEAT_C_RESET: + /* Clears driver's internal Port Reset Change flag */ + dev_dbg(hsotg->dev, + "ClearPortFeature USB_PORT_FEAT_C_RESET\n"); + hsotg->flags.b.port_reset_change = 0; + break; + + case USB_PORT_FEAT_C_ENABLE: + /* + * Clears the driver's internal Port Enable/Disable + * Change flag + */ + dev_dbg(hsotg->dev, + "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n"); + hsotg->flags.b.port_enable_change = 0; + break; + + case USB_PORT_FEAT_C_SUSPEND: + /* + * Clears the driver's internal Port Suspend Change + * flag, which is set when resume signaling on the host + * port is complete + */ + dev_dbg(hsotg->dev, + "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n"); + hsotg->flags.b.port_suspend_change = 0; + break; + + case USB_PORT_FEAT_C_PORT_L1: + dev_dbg(hsotg->dev, + "ClearPortFeature USB_PORT_FEAT_C_PORT_L1\n"); + hsotg->flags.b.port_l1_change = 0; + break; + + case USB_PORT_FEAT_C_OVER_CURRENT: + dev_dbg(hsotg->dev, + "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n"); + hsotg->flags.b.port_over_current_change = 0; + break; + + default: + retval = -EINVAL; + dev_err(hsotg->dev, + "ClearPortFeature request %1xh unknown or unsupported\n", + wvalue); + } + break; + + case GetHubDescriptor: + dev_dbg(hsotg->dev, "GetHubDescriptor\n"); + hub_desc = (struct usb_hub_descriptor *)buf; + hub_desc->bDescLength = 9; + hub_desc->bDescriptorType = USB_DT_HUB; + hub_desc->bNbrPorts = 1; + hub_desc->wHubCharacteristics = + cpu_to_le16(HUB_CHAR_COMMON_LPSM | + HUB_CHAR_INDV_PORT_OCPM); + hub_desc->bPwrOn2PwrGood = 1; + hub_desc->bHubContrCurrent = 0; + hub_desc->u.hs.DeviceRemovable[0] = 0; + hub_desc->u.hs.DeviceRemovable[1] = 0xff; + break; + + case GetHubStatus: + dev_dbg(hsotg->dev, "GetHubStatus\n"); + memset(buf, 0, 4); + break; + + case GetPortStatus: + dev_vdbg(hsotg->dev, + "GetPortStatus wIndex=0x%04x flags=0x%08x\n", windex, + hsotg->flags.d32); + if (!windex || windex > 1) + goto error; + + port_status = 0; + if (hsotg->flags.b.port_connect_status_change) + port_status |= USB_PORT_STAT_C_CONNECTION << 16; + if (hsotg->flags.b.port_enable_change) + port_status |= USB_PORT_STAT_C_ENABLE << 16; + if (hsotg->flags.b.port_suspend_change) + port_status |= USB_PORT_STAT_C_SUSPEND << 16; + if (hsotg->flags.b.port_l1_change) + port_status |= USB_PORT_STAT_C_L1 << 16; + if (hsotg->flags.b.port_reset_change) + port_status |= USB_PORT_STAT_C_RESET << 16; + if (hsotg->flags.b.port_over_current_change) { + dev_warn(hsotg->dev, "Overcurrent change detected\n"); + port_status |= USB_PORT_STAT_C_OVERCURRENT << 16; + } + + if (!hsotg->flags.b.port_connect_status) { + /* + * The port is disconnected, which means the core is + * either in device mode or it soon will be. Just + * return 0's for the remainder of the port status + * since the port register can't be read if the core + * is in device mode. + */ + *(__le32 *)buf = cpu_to_le32(port_status); + break; + } + + hprt0 = dwc2_readl(hsotg, HPRT0); + dev_vdbg(hsotg->dev, " HPRT0: 0x%08x\n", hprt0); + + if (hprt0 & HPRT0_CONNSTS) + port_status |= USB_PORT_STAT_CONNECTION; + if (hprt0 & HPRT0_ENA) + port_status |= USB_PORT_STAT_ENABLE; + if (hprt0 & HPRT0_SUSP) + port_status |= USB_PORT_STAT_SUSPEND; + if (hprt0 & HPRT0_OVRCURRACT) + port_status |= USB_PORT_STAT_OVERCURRENT; + if (hprt0 & HPRT0_RST) + port_status |= USB_PORT_STAT_RESET; + if (hprt0 & HPRT0_PWR) + port_status |= USB_PORT_STAT_POWER; + + speed = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT; + if (speed == HPRT0_SPD_HIGH_SPEED) + port_status |= USB_PORT_STAT_HIGH_SPEED; + else if (speed == HPRT0_SPD_LOW_SPEED) + port_status |= USB_PORT_STAT_LOW_SPEED; + + if (hprt0 & HPRT0_TSTCTL_MASK) + port_status |= USB_PORT_STAT_TEST; + /* USB_PORT_FEAT_INDICATOR unsupported always 0 */ + + if (hsotg->params.dma_desc_fs_enable) { + /* + * Enable descriptor DMA only if a full speed + * device is connected. + */ + if (hsotg->new_connection && + ((port_status & + (USB_PORT_STAT_CONNECTION | + USB_PORT_STAT_HIGH_SPEED | + USB_PORT_STAT_LOW_SPEED)) == + USB_PORT_STAT_CONNECTION)) { + u32 hcfg; + + dev_info(hsotg->dev, "Enabling descriptor DMA mode\n"); + hsotg->params.dma_desc_enable = true; + hcfg = dwc2_readl(hsotg, HCFG); + hcfg |= HCFG_DESCDMA; + dwc2_writel(hsotg, hcfg, HCFG); + hsotg->new_connection = false; + } + } + + dev_vdbg(hsotg->dev, "port_status=%08x\n", port_status); + *(__le32 *)buf = cpu_to_le32(port_status); + break; + + case SetHubFeature: + dev_dbg(hsotg->dev, "SetHubFeature\n"); + /* No HUB features supported */ + break; + + case SetPortFeature: + dev_dbg(hsotg->dev, "SetPortFeature\n"); + if (wvalue != USB_PORT_FEAT_TEST && (!windex || windex > 1)) + goto error; + + if (!hsotg->flags.b.port_connect_status) { + /* + * The port is disconnected, which means the core is + * either in device mode or it soon will be. Just + * return without doing anything since the port + * register can't be written if the core is in device + * mode. + */ + break; + } + + switch (wvalue) { + case USB_PORT_FEAT_SUSPEND: + dev_dbg(hsotg->dev, + "SetPortFeature - USB_PORT_FEAT_SUSPEND\n"); + if (windex != hsotg->otg_port) + goto error; + if (!hsotg->bus_suspended) + retval = dwc2_port_suspend(hsotg, windex); + break; + + case USB_PORT_FEAT_POWER: + dev_dbg(hsotg->dev, + "SetPortFeature - USB_PORT_FEAT_POWER\n"); + hprt0 = dwc2_read_hprt0(hsotg); + pwr = hprt0 & HPRT0_PWR; + hprt0 |= HPRT0_PWR; + dwc2_writel(hsotg, hprt0, HPRT0); + if (!pwr) + dwc2_vbus_supply_init(hsotg); + break; + + case USB_PORT_FEAT_RESET: + dev_dbg(hsotg->dev, + "SetPortFeature - USB_PORT_FEAT_RESET\n"); + + hprt0 = dwc2_read_hprt0(hsotg); + + if (hsotg->hibernated) { + retval = dwc2_exit_hibernation(hsotg, 0, 1, 1); + if (retval) + dev_err(hsotg->dev, + "exit hibernation failed\n"); + } + + if (hsotg->in_ppd) { + retval = dwc2_exit_partial_power_down(hsotg, 1, + true); + if (retval) + dev_err(hsotg->dev, + "exit partial_power_down failed\n"); + } + + if (hsotg->params.power_down == + DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended) + dwc2_host_exit_clock_gating(hsotg, 0); + + pcgctl = dwc2_readl(hsotg, PCGCTL); + pcgctl &= ~(PCGCTL_ENBL_SLEEP_GATING | PCGCTL_STOPPCLK); + dwc2_writel(hsotg, pcgctl, PCGCTL); + /* ??? Original driver does this */ + dwc2_writel(hsotg, 0, PCGCTL); + + hprt0 = dwc2_read_hprt0(hsotg); + pwr = hprt0 & HPRT0_PWR; + /* Clear suspend bit if resetting from suspend state */ + hprt0 &= ~HPRT0_SUSP; + + /* + * When B-Host the Port reset bit is set in the Start + * HCD Callback function, so that the reset is started + * within 1ms of the HNP success interrupt + */ + if (!dwc2_hcd_is_b_host(hsotg)) { + hprt0 |= HPRT0_PWR | HPRT0_RST; + dev_dbg(hsotg->dev, + "In host mode, hprt0=%08x\n", hprt0); + dwc2_writel(hsotg, hprt0, HPRT0); + if (!pwr) + dwc2_vbus_supply_init(hsotg); + } + + /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */ + msleep(50); + hprt0 &= ~HPRT0_RST; + dwc2_writel(hsotg, hprt0, HPRT0); + hsotg->lx_state = DWC2_L0; /* Now back to On state */ + break; + + case USB_PORT_FEAT_INDICATOR: + dev_dbg(hsotg->dev, + "SetPortFeature - USB_PORT_FEAT_INDICATOR\n"); + /* Not supported */ + break; + + case USB_PORT_FEAT_TEST: + hprt0 = dwc2_read_hprt0(hsotg); + dev_dbg(hsotg->dev, + "SetPortFeature - USB_PORT_FEAT_TEST\n"); + hprt0 &= ~HPRT0_TSTCTL_MASK; + hprt0 |= (windex >> 8) << HPRT0_TSTCTL_SHIFT; + dwc2_writel(hsotg, hprt0, HPRT0); + break; + + default: + retval = -EINVAL; + dev_err(hsotg->dev, + "SetPortFeature %1xh unknown or unsupported\n", + wvalue); + break; + } + break; + + default: +error: + retval = -EINVAL; + dev_dbg(hsotg->dev, + "Unknown hub control request: %1xh wIndex: %1xh wValue: %1xh\n", + typereq, windex, wvalue); + break; + } + + return retval; +} + +static int dwc2_hcd_is_status_changed(struct dwc2_hsotg *hsotg, int port) +{ + int retval; + + if (port != 1) + return -EINVAL; + + retval = (hsotg->flags.b.port_connect_status_change || + hsotg->flags.b.port_reset_change || + hsotg->flags.b.port_enable_change || + hsotg->flags.b.port_suspend_change || + hsotg->flags.b.port_over_current_change); + + if (retval) { + dev_dbg(hsotg->dev, + "DWC OTG HCD HUB STATUS DATA: Root port status changed\n"); + dev_dbg(hsotg->dev, " port_connect_status_change: %d\n", + hsotg->flags.b.port_connect_status_change); + dev_dbg(hsotg->dev, " port_reset_change: %d\n", + hsotg->flags.b.port_reset_change); + dev_dbg(hsotg->dev, " port_enable_change: %d\n", + hsotg->flags.b.port_enable_change); + dev_dbg(hsotg->dev, " port_suspend_change: %d\n", + hsotg->flags.b.port_suspend_change); + dev_dbg(hsotg->dev, " port_over_current_change: %d\n", + hsotg->flags.b.port_over_current_change); + } + + return retval; +} + +int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg) +{ + u32 hfnum = dwc2_readl(hsotg, HFNUM); + +#ifdef DWC2_DEBUG_SOF + dev_vdbg(hsotg->dev, "DWC OTG HCD GET FRAME NUMBER %d\n", + (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT); +#endif + return (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT; +} + +int dwc2_hcd_get_future_frame_number(struct dwc2_hsotg *hsotg, int us) +{ + u32 hprt = dwc2_readl(hsotg, HPRT0); + u32 hfir = dwc2_readl(hsotg, HFIR); + u32 hfnum = dwc2_readl(hsotg, HFNUM); + unsigned int us_per_frame; + unsigned int frame_number; + unsigned int remaining; + unsigned int interval; + unsigned int phy_clks; + + /* High speed has 125 us per (micro) frame; others are 1 ms per */ + us_per_frame = (hprt & HPRT0_SPD_MASK) ? 1000 : 125; + + /* Extract fields */ + frame_number = (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT; + remaining = (hfnum & HFNUM_FRREM_MASK) >> HFNUM_FRREM_SHIFT; + interval = (hfir & HFIR_FRINT_MASK) >> HFIR_FRINT_SHIFT; + + /* + * Number of phy clocks since the last tick of the frame number after + * "us" has passed. + */ + phy_clks = (interval - remaining) + + DIV_ROUND_UP(interval * us, us_per_frame); + + return dwc2_frame_num_inc(frame_number, phy_clks / interval); +} + +int dwc2_hcd_is_b_host(struct dwc2_hsotg *hsotg) +{ + return hsotg->op_state == OTG_STATE_B_HOST; +} + +static struct dwc2_hcd_urb *dwc2_hcd_urb_alloc(struct dwc2_hsotg *hsotg, + int iso_desc_count, + gfp_t mem_flags) +{ + struct dwc2_hcd_urb *urb; + + urb = kzalloc(struct_size(urb, iso_descs, iso_desc_count), mem_flags); + if (urb) + urb->packet_count = iso_desc_count; + return urb; +} + +static void dwc2_hcd_urb_set_pipeinfo(struct dwc2_hsotg *hsotg, + struct dwc2_hcd_urb *urb, u8 dev_addr, + u8 ep_num, u8 ep_type, u8 ep_dir, + u16 maxp, u16 maxp_mult) +{ + if (dbg_perio() || + ep_type == USB_ENDPOINT_XFER_BULK || + ep_type == USB_ENDPOINT_XFER_CONTROL) + dev_vdbg(hsotg->dev, + "addr=%d, ep_num=%d, ep_dir=%1x, ep_type=%1x, maxp=%d (%d mult)\n", + dev_addr, ep_num, ep_dir, ep_type, maxp, maxp_mult); + urb->pipe_info.dev_addr = dev_addr; + urb->pipe_info.ep_num = ep_num; + urb->pipe_info.pipe_type = ep_type; + urb->pipe_info.pipe_dir = ep_dir; + urb->pipe_info.maxp = maxp; + urb->pipe_info.maxp_mult = maxp_mult; +} + +/* + * NOTE: This function will be removed once the peripheral controller code + * is integrated and the driver is stable + */ +void dwc2_hcd_dump_state(struct dwc2_hsotg *hsotg) +{ +#ifdef DEBUG + struct dwc2_host_chan *chan; + struct dwc2_hcd_urb *urb; + struct dwc2_qtd *qtd; + int num_channels; + u32 np_tx_status; + u32 p_tx_status; + int i; + + num_channels = hsotg->params.host_channels; + dev_dbg(hsotg->dev, "\n"); + dev_dbg(hsotg->dev, + "************************************************************\n"); + dev_dbg(hsotg->dev, "HCD State:\n"); + dev_dbg(hsotg->dev, " Num channels: %d\n", num_channels); + + for (i = 0; i < num_channels; i++) { + chan = hsotg->hc_ptr_array[i]; + dev_dbg(hsotg->dev, " Channel %d:\n", i); + dev_dbg(hsotg->dev, + " dev_addr: %d, ep_num: %d, ep_is_in: %d\n", + chan->dev_addr, chan->ep_num, chan->ep_is_in); + dev_dbg(hsotg->dev, " speed: %d\n", chan->speed); + dev_dbg(hsotg->dev, " ep_type: %d\n", chan->ep_type); + dev_dbg(hsotg->dev, " max_packet: %d\n", chan->max_packet); + dev_dbg(hsotg->dev, " data_pid_start: %d\n", + chan->data_pid_start); + dev_dbg(hsotg->dev, " multi_count: %d\n", chan->multi_count); + dev_dbg(hsotg->dev, " xfer_started: %d\n", + chan->xfer_started); + dev_dbg(hsotg->dev, " xfer_buf: %p\n", chan->xfer_buf); + dev_dbg(hsotg->dev, " xfer_dma: %08lx\n", + (unsigned long)chan->xfer_dma); + dev_dbg(hsotg->dev, " xfer_len: %d\n", chan->xfer_len); + dev_dbg(hsotg->dev, " xfer_count: %d\n", chan->xfer_count); + dev_dbg(hsotg->dev, " halt_on_queue: %d\n", + chan->halt_on_queue); + dev_dbg(hsotg->dev, " halt_pending: %d\n", + chan->halt_pending); + dev_dbg(hsotg->dev, " halt_status: %d\n", chan->halt_status); + dev_dbg(hsotg->dev, " do_split: %d\n", chan->do_split); + dev_dbg(hsotg->dev, " complete_split: %d\n", + chan->complete_split); + dev_dbg(hsotg->dev, " hub_addr: %d\n", chan->hub_addr); + dev_dbg(hsotg->dev, " hub_port: %d\n", chan->hub_port); + dev_dbg(hsotg->dev, " xact_pos: %d\n", chan->xact_pos); + dev_dbg(hsotg->dev, " requests: %d\n", chan->requests); + dev_dbg(hsotg->dev, " qh: %p\n", chan->qh); + + if (chan->xfer_started) { + u32 hfnum, hcchar, hctsiz, hcint, hcintmsk; + + hfnum = dwc2_readl(hsotg, HFNUM); + hcchar = dwc2_readl(hsotg, HCCHAR(i)); + hctsiz = dwc2_readl(hsotg, HCTSIZ(i)); + hcint = dwc2_readl(hsotg, HCINT(i)); + hcintmsk = dwc2_readl(hsotg, HCINTMSK(i)); + dev_dbg(hsotg->dev, " hfnum: 0x%08x\n", hfnum); + dev_dbg(hsotg->dev, " hcchar: 0x%08x\n", hcchar); + dev_dbg(hsotg->dev, " hctsiz: 0x%08x\n", hctsiz); + dev_dbg(hsotg->dev, " hcint: 0x%08x\n", hcint); + dev_dbg(hsotg->dev, " hcintmsk: 0x%08x\n", hcintmsk); + } + + if (!(chan->xfer_started && chan->qh)) + continue; + + list_for_each_entry(qtd, &chan->qh->qtd_list, qtd_list_entry) { + if (!qtd->in_process) + break; + urb = qtd->urb; + dev_dbg(hsotg->dev, " URB Info:\n"); + dev_dbg(hsotg->dev, " qtd: %p, urb: %p\n", + qtd, urb); + if (urb) { + dev_dbg(hsotg->dev, + " Dev: %d, EP: %d %s\n", + dwc2_hcd_get_dev_addr(&urb->pipe_info), + dwc2_hcd_get_ep_num(&urb->pipe_info), + dwc2_hcd_is_pipe_in(&urb->pipe_info) ? + "IN" : "OUT"); + dev_dbg(hsotg->dev, + " Max packet size: %d (%d mult)\n", + dwc2_hcd_get_maxp(&urb->pipe_info), + dwc2_hcd_get_maxp_mult(&urb->pipe_info)); + dev_dbg(hsotg->dev, + " transfer_buffer: %p\n", + urb->buf); + dev_dbg(hsotg->dev, + " transfer_dma: %08lx\n", + (unsigned long)urb->dma); + dev_dbg(hsotg->dev, + " transfer_buffer_length: %d\n", + urb->length); + dev_dbg(hsotg->dev, " actual_length: %d\n", + urb->actual_length); + } + } + } + + dev_dbg(hsotg->dev, " non_periodic_channels: %d\n", + hsotg->non_periodic_channels); + dev_dbg(hsotg->dev, " periodic_channels: %d\n", + hsotg->periodic_channels); + dev_dbg(hsotg->dev, " periodic_usecs: %d\n", hsotg->periodic_usecs); + np_tx_status = dwc2_readl(hsotg, GNPTXSTS); + dev_dbg(hsotg->dev, " NP Tx Req Queue Space Avail: %d\n", + (np_tx_status & TXSTS_QSPCAVAIL_MASK) >> TXSTS_QSPCAVAIL_SHIFT); + dev_dbg(hsotg->dev, " NP Tx FIFO Space Avail: %d\n", + (np_tx_status & TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT); + p_tx_status = dwc2_readl(hsotg, HPTXSTS); + dev_dbg(hsotg->dev, " P Tx Req Queue Space Avail: %d\n", + (p_tx_status & TXSTS_QSPCAVAIL_MASK) >> TXSTS_QSPCAVAIL_SHIFT); + dev_dbg(hsotg->dev, " P Tx FIFO Space Avail: %d\n", + (p_tx_status & TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT); + dwc2_dump_global_registers(hsotg); + dwc2_dump_host_registers(hsotg); + dev_dbg(hsotg->dev, + "************************************************************\n"); + dev_dbg(hsotg->dev, "\n"); +#endif +} + +struct wrapper_priv_data { + struct dwc2_hsotg *hsotg; +}; + +/* Gets the dwc2_hsotg from a usb_hcd */ +static struct dwc2_hsotg *dwc2_hcd_to_hsotg(struct usb_hcd *hcd) +{ + struct wrapper_priv_data *p; + + p = (struct wrapper_priv_data *)&hcd->hcd_priv; + return p->hsotg; +} + +/** + * dwc2_host_get_tt_info() - Get the dwc2_tt associated with context + * + * This will get the dwc2_tt structure (and ttport) associated with the given + * context (which is really just a struct urb pointer). + * + * The first time this is called for a given TT we allocate memory for our + * structure. When everyone is done and has called dwc2_host_put_tt_info() + * then the refcount for the structure will go to 0 and we'll free it. + * + * @hsotg: The HCD state structure for the DWC OTG controller. + * @context: The priv pointer from a struct dwc2_hcd_urb. + * @mem_flags: Flags for allocating memory. + * @ttport: We'll return this device's port number here. That's used to + * reference into the bitmap if we're on a multi_tt hub. + * + * Return: a pointer to a struct dwc2_tt. Don't forget to call + * dwc2_host_put_tt_info()! Returns NULL upon memory alloc failure. + */ + +struct dwc2_tt *dwc2_host_get_tt_info(struct dwc2_hsotg *hsotg, void *context, + gfp_t mem_flags, int *ttport) +{ + struct urb *urb = context; + struct dwc2_tt *dwc_tt = NULL; + + if (urb->dev->tt) { + *ttport = urb->dev->ttport; + + dwc_tt = urb->dev->tt->hcpriv; + if (!dwc_tt) { + size_t bitmap_size; + + /* + * For single_tt we need one schedule. For multi_tt + * we need one per port. + */ + bitmap_size = DWC2_ELEMENTS_PER_LS_BITMAP * + sizeof(dwc_tt->periodic_bitmaps[0]); + if (urb->dev->tt->multi) + bitmap_size *= urb->dev->tt->hub->maxchild; + + dwc_tt = kzalloc(sizeof(*dwc_tt) + bitmap_size, + mem_flags); + if (!dwc_tt) + return NULL; + + dwc_tt->usb_tt = urb->dev->tt; + dwc_tt->usb_tt->hcpriv = dwc_tt; + } + + dwc_tt->refcount++; + } + + return dwc_tt; +} + +/** + * dwc2_host_put_tt_info() - Put the dwc2_tt from dwc2_host_get_tt_info() + * + * Frees resources allocated by dwc2_host_get_tt_info() if all current holders + * of the structure are done. + * + * It's OK to call this with NULL. + * + * @hsotg: The HCD state structure for the DWC OTG controller. + * @dwc_tt: The pointer returned by dwc2_host_get_tt_info. + */ +void dwc2_host_put_tt_info(struct dwc2_hsotg *hsotg, struct dwc2_tt *dwc_tt) +{ + /* Model kfree and make put of NULL a no-op */ + if (!dwc_tt) + return; + + WARN_ON(dwc_tt->refcount < 1); + + dwc_tt->refcount--; + if (!dwc_tt->refcount) { + dwc_tt->usb_tt->hcpriv = NULL; + kfree(dwc_tt); + } +} + +int dwc2_host_get_speed(struct dwc2_hsotg *hsotg, void *context) +{ + struct urb *urb = context; + + return urb->dev->speed; +} + +static void dwc2_allocate_bus_bandwidth(struct usb_hcd *hcd, u16 bw, + struct urb *urb) +{ + struct usb_bus *bus = hcd_to_bus(hcd); + + if (urb->interval) + bus->bandwidth_allocated += bw / urb->interval; + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) + bus->bandwidth_isoc_reqs++; + else + bus->bandwidth_int_reqs++; +} + +static void dwc2_free_bus_bandwidth(struct usb_hcd *hcd, u16 bw, + struct urb *urb) +{ + struct usb_bus *bus = hcd_to_bus(hcd); + + if (urb->interval) + bus->bandwidth_allocated -= bw / urb->interval; + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) + bus->bandwidth_isoc_reqs--; + else + bus->bandwidth_int_reqs--; +} + +/* + * Sets the final status of an URB and returns it to the upper layer. Any + * required cleanup of the URB is performed. + * + * Must be called with interrupt disabled and spinlock held + */ +void dwc2_host_complete(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd, + int status) +{ + struct urb *urb; + int i; + + if (!qtd) { + dev_dbg(hsotg->dev, "## %s: qtd is NULL ##\n", __func__); + return; + } + + if (!qtd->urb) { + dev_dbg(hsotg->dev, "## %s: qtd->urb is NULL ##\n", __func__); + return; + } + + urb = qtd->urb->priv; + if (!urb) { + dev_dbg(hsotg->dev, "## %s: urb->priv is NULL ##\n", __func__); + return; + } + + urb->actual_length = dwc2_hcd_urb_get_actual_length(qtd->urb); + + if (dbg_urb(urb)) + dev_vdbg(hsotg->dev, + "%s: urb %p device %d ep %d-%s status %d actual %d\n", + __func__, urb, usb_pipedevice(urb->pipe), + usb_pipeendpoint(urb->pipe), + usb_pipein(urb->pipe) ? "IN" : "OUT", status, + urb->actual_length); + + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { + urb->error_count = dwc2_hcd_urb_get_error_count(qtd->urb); + for (i = 0; i < urb->number_of_packets; ++i) { + urb->iso_frame_desc[i].actual_length = + dwc2_hcd_urb_get_iso_desc_actual_length( + qtd->urb, i); + urb->iso_frame_desc[i].status = + dwc2_hcd_urb_get_iso_desc_status(qtd->urb, i); + } + } + + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS && dbg_perio()) { + for (i = 0; i < urb->number_of_packets; i++) + dev_vdbg(hsotg->dev, " ISO Desc %d status %d\n", + i, urb->iso_frame_desc[i].status); + } + + urb->status = status; + if (!status) { + if ((urb->transfer_flags & URB_SHORT_NOT_OK) && + urb->actual_length < urb->transfer_buffer_length) + urb->status = -EREMOTEIO; + } + + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS || + usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { + struct usb_host_endpoint *ep = urb->ep; + + if (ep) + dwc2_free_bus_bandwidth(dwc2_hsotg_to_hcd(hsotg), + dwc2_hcd_get_ep_bandwidth(hsotg, ep), + urb); + } + + usb_hcd_unlink_urb_from_ep(dwc2_hsotg_to_hcd(hsotg), urb); + urb->hcpriv = NULL; + kfree(qtd->urb); + qtd->urb = NULL; + + usb_hcd_giveback_urb(dwc2_hsotg_to_hcd(hsotg), urb, status); +} + +/* + * Work queue function for starting the HCD when A-Cable is connected + */ +static void dwc2_hcd_start_func(struct work_struct *work) +{ + struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg, + start_work.work); + + dev_dbg(hsotg->dev, "%s() %p\n", __func__, hsotg); + dwc2_host_start(hsotg); +} + +/* + * Reset work queue function + */ +static void dwc2_hcd_reset_func(struct work_struct *work) +{ + struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg, + reset_work.work); + unsigned long flags; + u32 hprt0; + + dev_dbg(hsotg->dev, "USB RESET function called\n"); + + spin_lock_irqsave(&hsotg->lock, flags); + + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 &= ~HPRT0_RST; + dwc2_writel(hsotg, hprt0, HPRT0); + hsotg->flags.b.port_reset_change = 1; + + spin_unlock_irqrestore(&hsotg->lock, flags); +} + +static void dwc2_hcd_phy_reset_func(struct work_struct *work) +{ + struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg, + phy_reset_work); + int ret; + + ret = phy_reset(hsotg->phy); + if (ret) + dev_warn(hsotg->dev, "PHY reset failed\n"); +} + +/* + * ========================================================================= + * Linux HC Driver Functions + * ========================================================================= + */ + +/* + * Initializes the DWC_otg controller and its root hub and prepares it for host + * mode operation. Activates the root port. Returns 0 on success and a negative + * error code on failure. + */ +static int _dwc2_hcd_start(struct usb_hcd *hcd) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + struct usb_bus *bus = hcd_to_bus(hcd); + unsigned long flags; + u32 hprt0; + int ret; + + dev_dbg(hsotg->dev, "DWC OTG HCD START\n"); + + spin_lock_irqsave(&hsotg->lock, flags); + hsotg->lx_state = DWC2_L0; + hcd->state = HC_STATE_RUNNING; + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + + if (dwc2_is_device_mode(hsotg)) { + spin_unlock_irqrestore(&hsotg->lock, flags); + return 0; /* why 0 ?? */ + } + + dwc2_hcd_reinit(hsotg); + + hprt0 = dwc2_read_hprt0(hsotg); + /* Has vbus power been turned on in dwc2_core_host_init ? */ + if (hprt0 & HPRT0_PWR) { + /* Enable external vbus supply before resuming root hub */ + spin_unlock_irqrestore(&hsotg->lock, flags); + ret = dwc2_vbus_supply_init(hsotg); + if (ret) + return ret; + spin_lock_irqsave(&hsotg->lock, flags); + } + + /* Initialize and connect root hub if one is not already attached */ + if (bus->root_hub) { + dev_dbg(hsotg->dev, "DWC OTG HCD Has Root Hub\n"); + /* Inform the HUB driver to resume */ + usb_hcd_resume_root_hub(hcd); + } + + spin_unlock_irqrestore(&hsotg->lock, flags); + + return 0; +} + +/* + * Halts the DWC_otg host mode operations in a clean manner. USB transfers are + * stopped. + */ +static void _dwc2_hcd_stop(struct usb_hcd *hcd) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + unsigned long flags; + u32 hprt0; + + /* Turn off all host-specific interrupts */ + dwc2_disable_host_interrupts(hsotg); + + /* Wait for interrupt processing to finish */ + synchronize_irq(hcd->irq); + + spin_lock_irqsave(&hsotg->lock, flags); + hprt0 = dwc2_read_hprt0(hsotg); + /* Ensure hcd is disconnected */ + dwc2_hcd_disconnect(hsotg, true); + dwc2_hcd_stop(hsotg); + hsotg->lx_state = DWC2_L3; + hcd->state = HC_STATE_HALT; + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + spin_unlock_irqrestore(&hsotg->lock, flags); + + /* keep balanced supply init/exit by checking HPRT0_PWR */ + if (hprt0 & HPRT0_PWR) + dwc2_vbus_supply_exit(hsotg); + + usleep_range(1000, 3000); +} + +static int _dwc2_hcd_suspend(struct usb_hcd *hcd) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&hsotg->lock, flags); + + if (dwc2_is_device_mode(hsotg)) + goto unlock; + + if (hsotg->lx_state != DWC2_L0) + goto unlock; + + if (!HCD_HW_ACCESSIBLE(hcd)) + goto unlock; + + if (hsotg->op_state == OTG_STATE_B_PERIPHERAL) + goto unlock; + + if (hsotg->bus_suspended) + goto skip_power_saving; + + if (hsotg->flags.b.port_connect_status == 0) + goto skip_power_saving; + + switch (hsotg->params.power_down) { + case DWC2_POWER_DOWN_PARAM_PARTIAL: + /* Enter partial_power_down */ + ret = dwc2_enter_partial_power_down(hsotg); + if (ret) + dev_err(hsotg->dev, + "enter partial_power_down failed\n"); + /* After entering suspend, hardware is not accessible */ + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + break; + case DWC2_POWER_DOWN_PARAM_HIBERNATION: + /* Enter hibernation */ + spin_unlock_irqrestore(&hsotg->lock, flags); + ret = dwc2_enter_hibernation(hsotg, 1); + if (ret) + dev_err(hsotg->dev, "enter hibernation failed\n"); + spin_lock_irqsave(&hsotg->lock, flags); + + /* After entering suspend, hardware is not accessible */ + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + break; + case DWC2_POWER_DOWN_PARAM_NONE: + /* + * If not hibernation nor partial power down are supported, + * clock gating is used to save power. + */ + if (!hsotg->params.no_clock_gating) { + dwc2_host_enter_clock_gating(hsotg); + + /* After entering suspend, hardware is not accessible */ + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + } + break; + default: + goto skip_power_saving; + } + + spin_unlock_irqrestore(&hsotg->lock, flags); + dwc2_vbus_supply_exit(hsotg); + spin_lock_irqsave(&hsotg->lock, flags); + + /* Ask phy to be suspended */ + if (!IS_ERR_OR_NULL(hsotg->uphy)) { + spin_unlock_irqrestore(&hsotg->lock, flags); + usb_phy_set_suspend(hsotg->uphy, true); + spin_lock_irqsave(&hsotg->lock, flags); + } + +skip_power_saving: + hsotg->lx_state = DWC2_L2; +unlock: + spin_unlock_irqrestore(&hsotg->lock, flags); + + return ret; +} + +static int _dwc2_hcd_resume(struct usb_hcd *hcd) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + unsigned long flags; + u32 hprt0; + int ret = 0; + + spin_lock_irqsave(&hsotg->lock, flags); + + if (dwc2_is_device_mode(hsotg)) + goto unlock; + + if (hsotg->lx_state != DWC2_L2) + goto unlock; + + hprt0 = dwc2_read_hprt0(hsotg); + + /* + * Added port connection status checking which prevents exiting from + * Partial Power Down mode from _dwc2_hcd_resume() if not in Partial + * Power Down mode. + */ + if (hprt0 & HPRT0_CONNSTS) { + hsotg->lx_state = DWC2_L0; + goto unlock; + } + + switch (hsotg->params.power_down) { + case DWC2_POWER_DOWN_PARAM_PARTIAL: + ret = dwc2_exit_partial_power_down(hsotg, 0, true); + if (ret) + dev_err(hsotg->dev, + "exit partial_power_down failed\n"); + /* + * Set HW accessible bit before powering on the controller + * since an interrupt may rise. + */ + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + break; + case DWC2_POWER_DOWN_PARAM_HIBERNATION: + ret = dwc2_exit_hibernation(hsotg, 0, 0, 1); + if (ret) + dev_err(hsotg->dev, "exit hibernation failed.\n"); + + /* + * Set HW accessible bit before powering on the controller + * since an interrupt may rise. + */ + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + break; + case DWC2_POWER_DOWN_PARAM_NONE: + /* + * If not hibernation nor partial power down are supported, + * port resume is done using the clock gating programming flow. + */ + spin_unlock_irqrestore(&hsotg->lock, flags); + dwc2_host_exit_clock_gating(hsotg, 0); + + /* + * Initialize the Core for Host mode, as after system resume + * the global interrupts are disabled. + */ + dwc2_core_init(hsotg, false); + dwc2_enable_global_interrupts(hsotg); + dwc2_hcd_reinit(hsotg); + spin_lock_irqsave(&hsotg->lock, flags); + + /* + * Set HW accessible bit before powering on the controller + * since an interrupt may rise. + */ + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + break; + default: + hsotg->lx_state = DWC2_L0; + goto unlock; + } + + /* Change Root port status, as port status change occurred after resume.*/ + hsotg->flags.b.port_suspend_change = 1; + + /* + * Enable power if not already done. + * This must not be spinlocked since duration + * of this call is unknown. + */ + if (!IS_ERR_OR_NULL(hsotg->uphy)) { + spin_unlock_irqrestore(&hsotg->lock, flags); + usb_phy_set_suspend(hsotg->uphy, false); + spin_lock_irqsave(&hsotg->lock, flags); + } + + /* Enable external vbus supply after resuming the port. */ + spin_unlock_irqrestore(&hsotg->lock, flags); + dwc2_vbus_supply_init(hsotg); + + /* Wait for controller to correctly update D+/D- level */ + usleep_range(3000, 5000); + spin_lock_irqsave(&hsotg->lock, flags); + + /* + * Clear Port Enable and Port Status changes. + * Enable Port Power. + */ + dwc2_writel(hsotg, HPRT0_PWR | HPRT0_CONNDET | + HPRT0_ENACHG, HPRT0); + + /* Wait for controller to detect Port Connect */ + spin_unlock_irqrestore(&hsotg->lock, flags); + usleep_range(5000, 7000); + spin_lock_irqsave(&hsotg->lock, flags); +unlock: + spin_unlock_irqrestore(&hsotg->lock, flags); + + return ret; +} + +/* Returns the current frame number */ +static int _dwc2_hcd_get_frame_number(struct usb_hcd *hcd) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + + return dwc2_hcd_get_frame_number(hsotg); +} + +static void dwc2_dump_urb_info(struct usb_hcd *hcd, struct urb *urb, + char *fn_name) +{ +#ifdef VERBOSE_DEBUG + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + char *pipetype = NULL; + char *speed = NULL; + + dev_vdbg(hsotg->dev, "%s, urb %p\n", fn_name, urb); + dev_vdbg(hsotg->dev, " Device address: %d\n", + usb_pipedevice(urb->pipe)); + dev_vdbg(hsotg->dev, " Endpoint: %d, %s\n", + usb_pipeendpoint(urb->pipe), + usb_pipein(urb->pipe) ? "IN" : "OUT"); + + switch (usb_pipetype(urb->pipe)) { + case PIPE_CONTROL: + pipetype = "CONTROL"; + break; + case PIPE_BULK: + pipetype = "BULK"; + break; + case PIPE_INTERRUPT: + pipetype = "INTERRUPT"; + break; + case PIPE_ISOCHRONOUS: + pipetype = "ISOCHRONOUS"; + break; + } + + dev_vdbg(hsotg->dev, " Endpoint type: %s %s (%s)\n", pipetype, + usb_urb_dir_in(urb) ? "IN" : "OUT", usb_pipein(urb->pipe) ? + "IN" : "OUT"); + + switch (urb->dev->speed) { + case USB_SPEED_HIGH: + speed = "HIGH"; + break; + case USB_SPEED_FULL: + speed = "FULL"; + break; + case USB_SPEED_LOW: + speed = "LOW"; + break; + default: + speed = "UNKNOWN"; + break; + } + + dev_vdbg(hsotg->dev, " Speed: %s\n", speed); + dev_vdbg(hsotg->dev, " Max packet size: %d (%d mult)\n", + usb_endpoint_maxp(&urb->ep->desc), + usb_endpoint_maxp_mult(&urb->ep->desc)); + + dev_vdbg(hsotg->dev, " Data buffer length: %d\n", + urb->transfer_buffer_length); + dev_vdbg(hsotg->dev, " Transfer buffer: %p, Transfer DMA: %08lx\n", + urb->transfer_buffer, (unsigned long)urb->transfer_dma); + dev_vdbg(hsotg->dev, " Setup buffer: %p, Setup DMA: %08lx\n", + urb->setup_packet, (unsigned long)urb->setup_dma); + dev_vdbg(hsotg->dev, " Interval: %d\n", urb->interval); + + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { + int i; + + for (i = 0; i < urb->number_of_packets; i++) { + dev_vdbg(hsotg->dev, " ISO Desc %d:\n", i); + dev_vdbg(hsotg->dev, " offset: %d, length %d\n", + urb->iso_frame_desc[i].offset, + urb->iso_frame_desc[i].length); + } + } +#endif +} + +/* + * Starts processing a USB transfer request specified by a USB Request Block + * (URB). mem_flags indicates the type of memory allocation to use while + * processing this URB. + */ +static int _dwc2_hcd_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, + gfp_t mem_flags) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + struct usb_host_endpoint *ep = urb->ep; + struct dwc2_hcd_urb *dwc2_urb; + int i; + int retval; + int alloc_bandwidth = 0; + u8 ep_type = 0; + u32 tflags = 0; + void *buf; + unsigned long flags; + struct dwc2_qh *qh; + bool qh_allocated = false; + struct dwc2_qtd *qtd; + struct dwc2_gregs_backup *gr; + + gr = &hsotg->gr_backup; + + if (dbg_urb(urb)) { + dev_vdbg(hsotg->dev, "DWC OTG HCD URB Enqueue\n"); + dwc2_dump_urb_info(hcd, urb, "urb_enqueue"); + } + + if (hsotg->hibernated) { + if (gr->gotgctl & GOTGCTL_CURMODE_HOST) + retval = dwc2_exit_hibernation(hsotg, 0, 0, 1); + else + retval = dwc2_exit_hibernation(hsotg, 0, 0, 0); + + if (retval) + dev_err(hsotg->dev, + "exit hibernation failed.\n"); + } + + if (hsotg->in_ppd) { + retval = dwc2_exit_partial_power_down(hsotg, 0, true); + if (retval) + dev_err(hsotg->dev, + "exit partial_power_down failed\n"); + } + + if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_NONE && + hsotg->bus_suspended) { + if (dwc2_is_device_mode(hsotg)) + dwc2_gadget_exit_clock_gating(hsotg, 0); + else + dwc2_host_exit_clock_gating(hsotg, 0); + } + + if (!ep) + return -EINVAL; + + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS || + usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { + spin_lock_irqsave(&hsotg->lock, flags); + if (!dwc2_hcd_is_bandwidth_allocated(hsotg, ep)) + alloc_bandwidth = 1; + spin_unlock_irqrestore(&hsotg->lock, flags); + } + + switch (usb_pipetype(urb->pipe)) { + case PIPE_CONTROL: + ep_type = USB_ENDPOINT_XFER_CONTROL; + break; + case PIPE_ISOCHRONOUS: + ep_type = USB_ENDPOINT_XFER_ISOC; + break; + case PIPE_BULK: + ep_type = USB_ENDPOINT_XFER_BULK; + break; + case PIPE_INTERRUPT: + ep_type = USB_ENDPOINT_XFER_INT; + break; + } + + dwc2_urb = dwc2_hcd_urb_alloc(hsotg, urb->number_of_packets, + mem_flags); + if (!dwc2_urb) + return -ENOMEM; + + dwc2_hcd_urb_set_pipeinfo(hsotg, dwc2_urb, usb_pipedevice(urb->pipe), + usb_pipeendpoint(urb->pipe), ep_type, + usb_pipein(urb->pipe), + usb_endpoint_maxp(&ep->desc), + usb_endpoint_maxp_mult(&ep->desc)); + + buf = urb->transfer_buffer; + + if (hcd_uses_dma(hcd)) { + if (!buf && (urb->transfer_dma & 3)) { + dev_err(hsotg->dev, + "%s: unaligned transfer with no transfer_buffer", + __func__); + retval = -EINVAL; + goto fail0; + } + } + + if (!(urb->transfer_flags & URB_NO_INTERRUPT)) + tflags |= URB_GIVEBACK_ASAP; + if (urb->transfer_flags & URB_ZERO_PACKET) + tflags |= URB_SEND_ZERO_PACKET; + + dwc2_urb->priv = urb; + dwc2_urb->buf = buf; + dwc2_urb->dma = urb->transfer_dma; + dwc2_urb->length = urb->transfer_buffer_length; + dwc2_urb->setup_packet = urb->setup_packet; + dwc2_urb->setup_dma = urb->setup_dma; + dwc2_urb->flags = tflags; + dwc2_urb->interval = urb->interval; + dwc2_urb->status = -EINPROGRESS; + + for (i = 0; i < urb->number_of_packets; ++i) + dwc2_hcd_urb_set_iso_desc_params(dwc2_urb, i, + urb->iso_frame_desc[i].offset, + urb->iso_frame_desc[i].length); + + urb->hcpriv = dwc2_urb; + qh = (struct dwc2_qh *)ep->hcpriv; + /* Create QH for the endpoint if it doesn't exist */ + if (!qh) { + qh = dwc2_hcd_qh_create(hsotg, dwc2_urb, mem_flags); + if (!qh) { + retval = -ENOMEM; + goto fail0; + } + ep->hcpriv = qh; + qh_allocated = true; + } + + qtd = kzalloc(sizeof(*qtd), mem_flags); + if (!qtd) { + retval = -ENOMEM; + goto fail1; + } + + spin_lock_irqsave(&hsotg->lock, flags); + retval = usb_hcd_link_urb_to_ep(hcd, urb); + if (retval) + goto fail2; + + retval = dwc2_hcd_urb_enqueue(hsotg, dwc2_urb, qh, qtd); + if (retval) + goto fail3; + + if (alloc_bandwidth) { + dwc2_allocate_bus_bandwidth(hcd, + dwc2_hcd_get_ep_bandwidth(hsotg, ep), + urb); + } + + spin_unlock_irqrestore(&hsotg->lock, flags); + + return 0; + +fail3: + dwc2_urb->priv = NULL; + usb_hcd_unlink_urb_from_ep(hcd, urb); + if (qh_allocated && qh->channel && qh->channel->qh == qh) + qh->channel->qh = NULL; +fail2: + urb->hcpriv = NULL; + spin_unlock_irqrestore(&hsotg->lock, flags); + kfree(qtd); +fail1: + if (qh_allocated) { + struct dwc2_qtd *qtd2, *qtd2_tmp; + + ep->hcpriv = NULL; + dwc2_hcd_qh_unlink(hsotg, qh); + /* Free each QTD in the QH's QTD list */ + list_for_each_entry_safe(qtd2, qtd2_tmp, &qh->qtd_list, + qtd_list_entry) + dwc2_hcd_qtd_unlink_and_free(hsotg, qtd2, qh); + dwc2_hcd_qh_free(hsotg, qh); + } +fail0: + kfree(dwc2_urb); + + return retval; +} + +/* + * Aborts/cancels a USB transfer request. Always returns 0 to indicate success. + */ +static int _dwc2_hcd_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, + int status) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + int rc; + unsigned long flags; + + dev_dbg(hsotg->dev, "DWC OTG HCD URB Dequeue\n"); + dwc2_dump_urb_info(hcd, urb, "urb_dequeue"); + + spin_lock_irqsave(&hsotg->lock, flags); + + rc = usb_hcd_check_unlink_urb(hcd, urb, status); + if (rc) + goto out; + + if (!urb->hcpriv) { + dev_dbg(hsotg->dev, "## urb->hcpriv is NULL ##\n"); + goto out; + } + + rc = dwc2_hcd_urb_dequeue(hsotg, urb->hcpriv); + + usb_hcd_unlink_urb_from_ep(hcd, urb); + + kfree(urb->hcpriv); + urb->hcpriv = NULL; + + /* Higher layer software sets URB status */ + spin_unlock(&hsotg->lock); + usb_hcd_giveback_urb(hcd, urb, status); + spin_lock(&hsotg->lock); + + dev_dbg(hsotg->dev, "Called usb_hcd_giveback_urb()\n"); + dev_dbg(hsotg->dev, " urb->status = %d\n", urb->status); +out: + spin_unlock_irqrestore(&hsotg->lock, flags); + + return rc; +} + +/* + * Frees resources in the DWC_otg controller related to a given endpoint. Also + * clears state in the HCD related to the endpoint. Any URBs for the endpoint + * must already be dequeued. + */ +static void _dwc2_hcd_endpoint_disable(struct usb_hcd *hcd, + struct usb_host_endpoint *ep) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + + dev_dbg(hsotg->dev, + "DWC OTG HCD EP DISABLE: bEndpointAddress=0x%02x, ep->hcpriv=%p\n", + ep->desc.bEndpointAddress, ep->hcpriv); + dwc2_hcd_endpoint_disable(hsotg, ep, 250); +} + +/* + * Resets endpoint specific parameter values, in current version used to reset + * the data toggle (as a WA). This function can be called from usb_clear_halt + * routine. + */ +static void _dwc2_hcd_endpoint_reset(struct usb_hcd *hcd, + struct usb_host_endpoint *ep) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + unsigned long flags; + + dev_dbg(hsotg->dev, + "DWC OTG HCD EP RESET: bEndpointAddress=0x%02x\n", + ep->desc.bEndpointAddress); + + spin_lock_irqsave(&hsotg->lock, flags); + dwc2_hcd_endpoint_reset(hsotg, ep); + spin_unlock_irqrestore(&hsotg->lock, flags); +} + +/* + * Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if + * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid + * interrupt. + * + * This function is called by the USB core when an interrupt occurs + */ +static irqreturn_t _dwc2_hcd_irq(struct usb_hcd *hcd) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + + return dwc2_handle_hcd_intr(hsotg); +} + +/* + * Creates Status Change bitmap for the root hub and root port. The bitmap is + * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1 + * is the status change indicator for the single root port. Returns 1 if either + * change indicator is 1, otherwise returns 0. + */ +static int _dwc2_hcd_hub_status_data(struct usb_hcd *hcd, char *buf) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + + buf[0] = dwc2_hcd_is_status_changed(hsotg, 1) << 1; + return buf[0] != 0; +} + +/* Handles hub class-specific requests */ +static int _dwc2_hcd_hub_control(struct usb_hcd *hcd, u16 typereq, u16 wvalue, + u16 windex, char *buf, u16 wlength) +{ + int retval = dwc2_hcd_hub_control(dwc2_hcd_to_hsotg(hcd), typereq, + wvalue, windex, buf, wlength); + return retval; +} + +/* Handles hub TT buffer clear completions */ +static void _dwc2_hcd_clear_tt_buffer_complete(struct usb_hcd *hcd, + struct usb_host_endpoint *ep) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + struct dwc2_qh *qh; + unsigned long flags; + + qh = ep->hcpriv; + if (!qh) + return; + + spin_lock_irqsave(&hsotg->lock, flags); + qh->tt_buffer_dirty = 0; + + if (hsotg->flags.b.port_connect_status) + dwc2_hcd_queue_transactions(hsotg, DWC2_TRANSACTION_ALL); + + spin_unlock_irqrestore(&hsotg->lock, flags); +} + +/* + * HPRT0_SPD_HIGH_SPEED: high speed + * HPRT0_SPD_FULL_SPEED: full speed + */ +static void dwc2_change_bus_speed(struct usb_hcd *hcd, int speed) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + + if (hsotg->params.speed == speed) + return; + + hsotg->params.speed = speed; + queue_work(hsotg->wq_otg, &hsotg->wf_otg); +} + +static void dwc2_free_dev(struct usb_hcd *hcd, struct usb_device *udev) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + + if (!hsotg->params.change_speed_quirk) + return; + + /* + * On removal, set speed to default high-speed. + */ + if (udev->parent && udev->parent->speed > USB_SPEED_UNKNOWN && + udev->parent->speed < USB_SPEED_HIGH) { + dev_info(hsotg->dev, "Set speed to default high-speed\n"); + dwc2_change_bus_speed(hcd, HPRT0_SPD_HIGH_SPEED); + } +} + +static int dwc2_reset_device(struct usb_hcd *hcd, struct usb_device *udev) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + + if (!hsotg->params.change_speed_quirk) + return 0; + + if (udev->speed == USB_SPEED_HIGH) { + dev_info(hsotg->dev, "Set speed to high-speed\n"); + dwc2_change_bus_speed(hcd, HPRT0_SPD_HIGH_SPEED); + } else if ((udev->speed == USB_SPEED_FULL || + udev->speed == USB_SPEED_LOW)) { + /* + * Change speed setting to full-speed if there's + * a full-speed or low-speed device plugged in. + */ + dev_info(hsotg->dev, "Set speed to full-speed\n"); + dwc2_change_bus_speed(hcd, HPRT0_SPD_FULL_SPEED); + } + + return 0; +} + +static struct hc_driver dwc2_hc_driver = { + .description = "dwc2_hsotg", + .product_desc = "DWC OTG Controller", + .hcd_priv_size = sizeof(struct wrapper_priv_data), + + .irq = _dwc2_hcd_irq, + .flags = HCD_MEMORY | HCD_USB2 | HCD_BH, + + .start = _dwc2_hcd_start, + .stop = _dwc2_hcd_stop, + .urb_enqueue = _dwc2_hcd_urb_enqueue, + .urb_dequeue = _dwc2_hcd_urb_dequeue, + .endpoint_disable = _dwc2_hcd_endpoint_disable, + .endpoint_reset = _dwc2_hcd_endpoint_reset, + .get_frame_number = _dwc2_hcd_get_frame_number, + + .hub_status_data = _dwc2_hcd_hub_status_data, + .hub_control = _dwc2_hcd_hub_control, + .clear_tt_buffer_complete = _dwc2_hcd_clear_tt_buffer_complete, + + .bus_suspend = _dwc2_hcd_suspend, + .bus_resume = _dwc2_hcd_resume, + + .map_urb_for_dma = dwc2_map_urb_for_dma, + .unmap_urb_for_dma = dwc2_unmap_urb_for_dma, +}; + +/* + * Frees secondary storage associated with the dwc2_hsotg structure contained + * in the struct usb_hcd field + */ +static void dwc2_hcd_free(struct dwc2_hsotg *hsotg) +{ + u32 ahbcfg; + u32 dctl; + int i; + + dev_dbg(hsotg->dev, "DWC OTG HCD FREE\n"); + + /* Free memory for QH/QTD lists */ + dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_inactive); + dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_waiting); + dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_active); + dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_inactive); + dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_ready); + dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_assigned); + dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_queued); + + /* Free memory for the host channels */ + for (i = 0; i < MAX_EPS_CHANNELS; i++) { + struct dwc2_host_chan *chan = hsotg->hc_ptr_array[i]; + + if (chan) { + dev_dbg(hsotg->dev, "HCD Free channel #%i, chan=%p\n", + i, chan); + hsotg->hc_ptr_array[i] = NULL; + kfree(chan); + } + } + + if (hsotg->params.host_dma) { + if (hsotg->status_buf) { + dma_free_coherent(hsotg->dev, DWC2_HCD_STATUS_BUF_SIZE, + hsotg->status_buf, + hsotg->status_buf_dma); + hsotg->status_buf = NULL; + } + } else { + kfree(hsotg->status_buf); + hsotg->status_buf = NULL; + } + + ahbcfg = dwc2_readl(hsotg, GAHBCFG); + + /* Disable all interrupts */ + ahbcfg &= ~GAHBCFG_GLBL_INTR_EN; + dwc2_writel(hsotg, ahbcfg, GAHBCFG); + dwc2_writel(hsotg, 0, GINTMSK); + + if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a) { + dctl = dwc2_readl(hsotg, DCTL); + dctl |= DCTL_SFTDISCON; + dwc2_writel(hsotg, dctl, DCTL); + } + + if (hsotg->wq_otg) { + if (!cancel_work_sync(&hsotg->wf_otg)) + flush_workqueue(hsotg->wq_otg); + destroy_workqueue(hsotg->wq_otg); + } + + cancel_work_sync(&hsotg->phy_reset_work); + + del_timer(&hsotg->wkp_timer); +} + +static void dwc2_hcd_release(struct dwc2_hsotg *hsotg) +{ + /* Turn off all host-specific interrupts */ + dwc2_disable_host_interrupts(hsotg); + + dwc2_hcd_free(hsotg); +} + +/* + * Initializes the HCD. This function allocates memory for and initializes the + * static parts of the usb_hcd and dwc2_hsotg structures. It also registers the + * USB bus with the core and calls the hc_driver->start() function. It returns + * a negative error on failure. + */ +int dwc2_hcd_init(struct dwc2_hsotg *hsotg) +{ + struct platform_device *pdev = to_platform_device(hsotg->dev); + struct resource *res; + struct usb_hcd *hcd; + struct dwc2_host_chan *channel; + u32 hcfg; + int i, num_channels; + int retval; + + if (usb_disabled()) + return -ENODEV; + + dev_dbg(hsotg->dev, "DWC OTG HCD INIT\n"); + + retval = -ENOMEM; + + hcfg = dwc2_readl(hsotg, HCFG); + dev_dbg(hsotg->dev, "hcfg=%08x\n", hcfg); + +#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS + hsotg->frame_num_array = kcalloc(FRAME_NUM_ARRAY_SIZE, + sizeof(*hsotg->frame_num_array), + GFP_KERNEL); + if (!hsotg->frame_num_array) + goto error1; + hsotg->last_frame_num_array = + kcalloc(FRAME_NUM_ARRAY_SIZE, + sizeof(*hsotg->last_frame_num_array), GFP_KERNEL); + if (!hsotg->last_frame_num_array) + goto error1; +#endif + hsotg->last_frame_num = HFNUM_MAX_FRNUM; + + /* Check if the bus driver or platform code has setup a dma_mask */ + if (hsotg->params.host_dma && + !hsotg->dev->dma_mask) { + dev_warn(hsotg->dev, + "dma_mask not set, disabling DMA\n"); + hsotg->params.host_dma = false; + hsotg->params.dma_desc_enable = false; + } + + /* Set device flags indicating whether the HCD supports DMA */ + if (hsotg->params.host_dma) { + if (dma_set_mask(hsotg->dev, DMA_BIT_MASK(32)) < 0) + dev_warn(hsotg->dev, "can't set DMA mask\n"); + if (dma_set_coherent_mask(hsotg->dev, DMA_BIT_MASK(32)) < 0) + dev_warn(hsotg->dev, "can't set coherent DMA mask\n"); + } + + if (hsotg->params.change_speed_quirk) { + dwc2_hc_driver.free_dev = dwc2_free_dev; + dwc2_hc_driver.reset_device = dwc2_reset_device; + } + + if (hsotg->params.host_dma) + dwc2_hc_driver.flags |= HCD_DMA; + + hcd = usb_create_hcd(&dwc2_hc_driver, hsotg->dev, dev_name(hsotg->dev)); + if (!hcd) + goto error1; + + hcd->has_tt = 1; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + retval = -EINVAL; + goto error2; + } + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + + ((struct wrapper_priv_data *)&hcd->hcd_priv)->hsotg = hsotg; + hsotg->priv = hcd; + + /* + * Disable the global interrupt until all the interrupt handlers are + * installed + */ + dwc2_disable_global_interrupts(hsotg); + + /* Initialize the DWC_otg core, and select the Phy type */ + retval = dwc2_core_init(hsotg, true); + if (retval) + goto error2; + + /* Create new workqueue and init work */ + retval = -ENOMEM; + hsotg->wq_otg = alloc_ordered_workqueue("dwc2", 0); + if (!hsotg->wq_otg) { + dev_err(hsotg->dev, "Failed to create workqueue\n"); + goto error2; + } + INIT_WORK(&hsotg->wf_otg, dwc2_conn_id_status_change); + + timer_setup(&hsotg->wkp_timer, dwc2_wakeup_detected, 0); + + /* Initialize the non-periodic schedule */ + INIT_LIST_HEAD(&hsotg->non_periodic_sched_inactive); + INIT_LIST_HEAD(&hsotg->non_periodic_sched_waiting); + INIT_LIST_HEAD(&hsotg->non_periodic_sched_active); + + /* Initialize the periodic schedule */ + INIT_LIST_HEAD(&hsotg->periodic_sched_inactive); + INIT_LIST_HEAD(&hsotg->periodic_sched_ready); + INIT_LIST_HEAD(&hsotg->periodic_sched_assigned); + INIT_LIST_HEAD(&hsotg->periodic_sched_queued); + + INIT_LIST_HEAD(&hsotg->split_order); + + /* + * Create a host channel descriptor for each host channel implemented + * in the controller. Initialize the channel descriptor array. + */ + INIT_LIST_HEAD(&hsotg->free_hc_list); + num_channels = hsotg->params.host_channels; + memset(&hsotg->hc_ptr_array[0], 0, sizeof(hsotg->hc_ptr_array)); + + for (i = 0; i < num_channels; i++) { + channel = kzalloc(sizeof(*channel), GFP_KERNEL); + if (!channel) + goto error3; + channel->hc_num = i; + INIT_LIST_HEAD(&channel->split_order_list_entry); + hsotg->hc_ptr_array[i] = channel; + } + + /* Initialize work */ + INIT_DELAYED_WORK(&hsotg->start_work, dwc2_hcd_start_func); + INIT_DELAYED_WORK(&hsotg->reset_work, dwc2_hcd_reset_func); + INIT_WORK(&hsotg->phy_reset_work, dwc2_hcd_phy_reset_func); + + /* + * Allocate space for storing data on status transactions. Normally no + * data is sent, but this space acts as a bit bucket. This must be + * done after usb_add_hcd since that function allocates the DMA buffer + * pool. + */ + if (hsotg->params.host_dma) + hsotg->status_buf = dma_alloc_coherent(hsotg->dev, + DWC2_HCD_STATUS_BUF_SIZE, + &hsotg->status_buf_dma, GFP_KERNEL); + else + hsotg->status_buf = kzalloc(DWC2_HCD_STATUS_BUF_SIZE, + GFP_KERNEL); + + if (!hsotg->status_buf) + goto error3; + + /* + * Create kmem caches to handle descriptor buffers in descriptor + * DMA mode. + * Alignment must be set to 512 bytes. + */ + if (hsotg->params.dma_desc_enable || + hsotg->params.dma_desc_fs_enable) { + hsotg->desc_gen_cache = kmem_cache_create("dwc2-gen-desc", + sizeof(struct dwc2_dma_desc) * + MAX_DMA_DESC_NUM_GENERIC, 512, SLAB_CACHE_DMA, + NULL); + if (!hsotg->desc_gen_cache) { + dev_err(hsotg->dev, + "unable to create dwc2 generic desc cache\n"); + + /* + * Disable descriptor dma mode since it will not be + * usable. + */ + hsotg->params.dma_desc_enable = false; + hsotg->params.dma_desc_fs_enable = false; + } + + hsotg->desc_hsisoc_cache = kmem_cache_create("dwc2-hsisoc-desc", + sizeof(struct dwc2_dma_desc) * + MAX_DMA_DESC_NUM_HS_ISOC, 512, 0, NULL); + if (!hsotg->desc_hsisoc_cache) { + dev_err(hsotg->dev, + "unable to create dwc2 hs isoc desc cache\n"); + + kmem_cache_destroy(hsotg->desc_gen_cache); + + /* + * Disable descriptor dma mode since it will not be + * usable. + */ + hsotg->params.dma_desc_enable = false; + hsotg->params.dma_desc_fs_enable = false; + } + } + + if (hsotg->params.host_dma) { + /* + * Create kmem caches to handle non-aligned buffer + * in Buffer DMA mode. + */ + hsotg->unaligned_cache = kmem_cache_create("dwc2-unaligned-dma", + DWC2_KMEM_UNALIGNED_BUF_SIZE, 4, + SLAB_CACHE_DMA, NULL); + if (!hsotg->unaligned_cache) + dev_err(hsotg->dev, + "unable to create dwc2 unaligned cache\n"); + } + + hsotg->otg_port = 1; + hsotg->frame_list = NULL; + hsotg->frame_list_dma = 0; + hsotg->periodic_qh_count = 0; + + /* Initiate lx_state to L3 disconnected state */ + hsotg->lx_state = DWC2_L3; + + hcd->self.otg_port = hsotg->otg_port; + + /* Don't support SG list at this point */ + hcd->self.sg_tablesize = 0; + + hcd->tpl_support = of_usb_host_tpl_support(hsotg->dev->of_node); + + if (!IS_ERR_OR_NULL(hsotg->uphy)) + otg_set_host(hsotg->uphy->otg, &hcd->self); + + /* + * Finish generic HCD initialization and start the HCD. This function + * allocates the DMA buffer pool, registers the USB bus, requests the + * IRQ line, and calls hcd_start method. + */ + retval = usb_add_hcd(hcd, hsotg->irq, IRQF_SHARED); + if (retval < 0) + goto error4; + + device_wakeup_enable(hcd->self.controller); + + dwc2_hcd_dump_state(hsotg); + + dwc2_enable_global_interrupts(hsotg); + + return 0; + +error4: + kmem_cache_destroy(hsotg->unaligned_cache); + kmem_cache_destroy(hsotg->desc_hsisoc_cache); + kmem_cache_destroy(hsotg->desc_gen_cache); +error3: + dwc2_hcd_release(hsotg); +error2: + usb_put_hcd(hcd); +error1: + +#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS + kfree(hsotg->last_frame_num_array); + kfree(hsotg->frame_num_array); +#endif + + dev_err(hsotg->dev, "%s() FAILED, returning %d\n", __func__, retval); + return retval; +} + +/* + * Removes the HCD. + * Frees memory and resources associated with the HCD and deregisters the bus. + */ +void dwc2_hcd_remove(struct dwc2_hsotg *hsotg) +{ + struct usb_hcd *hcd; + + dev_dbg(hsotg->dev, "DWC OTG HCD REMOVE\n"); + + hcd = dwc2_hsotg_to_hcd(hsotg); + dev_dbg(hsotg->dev, "hsotg->hcd = %p\n", hcd); + + if (!hcd) { + dev_dbg(hsotg->dev, "%s: dwc2_hsotg_to_hcd(hsotg) NULL!\n", + __func__); + return; + } + + if (!IS_ERR_OR_NULL(hsotg->uphy)) + otg_set_host(hsotg->uphy->otg, NULL); + + usb_remove_hcd(hcd); + hsotg->priv = NULL; + + kmem_cache_destroy(hsotg->unaligned_cache); + kmem_cache_destroy(hsotg->desc_hsisoc_cache); + kmem_cache_destroy(hsotg->desc_gen_cache); + + dwc2_hcd_release(hsotg); + usb_put_hcd(hcd); + +#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS + kfree(hsotg->last_frame_num_array); + kfree(hsotg->frame_num_array); +#endif +} + +/** + * dwc2_backup_host_registers() - Backup controller host registers. + * When suspending usb bus, registers needs to be backuped + * if controller power is disabled once suspended. + * + * @hsotg: Programming view of the DWC_otg controller + */ +int dwc2_backup_host_registers(struct dwc2_hsotg *hsotg) +{ + struct dwc2_hregs_backup *hr; + int i; + + dev_dbg(hsotg->dev, "%s\n", __func__); + + /* Backup Host regs */ + hr = &hsotg->hr_backup; + hr->hcfg = dwc2_readl(hsotg, HCFG); + hr->haintmsk = dwc2_readl(hsotg, HAINTMSK); + for (i = 0; i < hsotg->params.host_channels; ++i) + hr->hcintmsk[i] = dwc2_readl(hsotg, HCINTMSK(i)); + + hr->hprt0 = dwc2_read_hprt0(hsotg); + hr->hfir = dwc2_readl(hsotg, HFIR); + hr->hptxfsiz = dwc2_readl(hsotg, HPTXFSIZ); + hr->valid = true; + + return 0; +} + +/** + * dwc2_restore_host_registers() - Restore controller host registers. + * When resuming usb bus, device registers needs to be restored + * if controller power were disabled. + * + * @hsotg: Programming view of the DWC_otg controller + */ +int dwc2_restore_host_registers(struct dwc2_hsotg *hsotg) +{ + struct dwc2_hregs_backup *hr; + int i; + + dev_dbg(hsotg->dev, "%s\n", __func__); + + /* Restore host regs */ + hr = &hsotg->hr_backup; + if (!hr->valid) { + dev_err(hsotg->dev, "%s: no host registers to restore\n", + __func__); + return -EINVAL; + } + hr->valid = false; + + dwc2_writel(hsotg, hr->hcfg, HCFG); + dwc2_writel(hsotg, hr->haintmsk, HAINTMSK); + + for (i = 0; i < hsotg->params.host_channels; ++i) + dwc2_writel(hsotg, hr->hcintmsk[i], HCINTMSK(i)); + + dwc2_writel(hsotg, hr->hprt0, HPRT0); + dwc2_writel(hsotg, hr->hfir, HFIR); + dwc2_writel(hsotg, hr->hptxfsiz, HPTXFSIZ); + hsotg->frame_number = 0; + + return 0; +} + +/** + * dwc2_host_enter_hibernation() - Put controller in Hibernation. + * + * @hsotg: Programming view of the DWC_otg controller + */ +int dwc2_host_enter_hibernation(struct dwc2_hsotg *hsotg) +{ + unsigned long flags; + int ret = 0; + u32 hprt0; + u32 pcgcctl; + u32 gusbcfg; + u32 gpwrdn; + + dev_dbg(hsotg->dev, "Preparing host for hibernation\n"); + ret = dwc2_backup_global_registers(hsotg); + if (ret) { + dev_err(hsotg->dev, "%s: failed to backup global registers\n", + __func__); + return ret; + } + ret = dwc2_backup_host_registers(hsotg); + if (ret) { + dev_err(hsotg->dev, "%s: failed to backup host registers\n", + __func__); + return ret; + } + + /* Enter USB Suspend Mode */ + hprt0 = dwc2_readl(hsotg, HPRT0); + hprt0 |= HPRT0_SUSP; + hprt0 &= ~HPRT0_ENA; + dwc2_writel(hsotg, hprt0, HPRT0); + + /* Wait for the HPRT0.PrtSusp register field to be set */ + if (dwc2_hsotg_wait_bit_set(hsotg, HPRT0, HPRT0_SUSP, 5000)) + dev_warn(hsotg->dev, "Suspend wasn't generated\n"); + + /* + * We need to disable interrupts to prevent servicing of any IRQ + * during going to hibernation + */ + spin_lock_irqsave(&hsotg->lock, flags); + hsotg->lx_state = DWC2_L2; + + gusbcfg = dwc2_readl(hsotg, GUSBCFG); + if (gusbcfg & GUSBCFG_ULPI_UTMI_SEL) { + /* ULPI interface */ + /* Suspend the Phy Clock */ + pcgcctl = dwc2_readl(hsotg, PCGCTL); + pcgcctl |= PCGCTL_STOPPCLK; + dwc2_writel(hsotg, pcgcctl, PCGCTL); + udelay(10); + + gpwrdn = dwc2_readl(hsotg, GPWRDN); + gpwrdn |= GPWRDN_PMUACTV; + dwc2_writel(hsotg, gpwrdn, GPWRDN); + udelay(10); + } else { + /* UTMI+ Interface */ + gpwrdn = dwc2_readl(hsotg, GPWRDN); + gpwrdn |= GPWRDN_PMUACTV; + dwc2_writel(hsotg, gpwrdn, GPWRDN); + udelay(10); + + pcgcctl = dwc2_readl(hsotg, PCGCTL); + pcgcctl |= PCGCTL_STOPPCLK; + dwc2_writel(hsotg, pcgcctl, PCGCTL); + udelay(10); + } + + /* Enable interrupts from wake up logic */ + gpwrdn = dwc2_readl(hsotg, GPWRDN); + gpwrdn |= GPWRDN_PMUINTSEL; + dwc2_writel(hsotg, gpwrdn, GPWRDN); + udelay(10); + + /* Unmask host mode interrupts in GPWRDN */ + gpwrdn = dwc2_readl(hsotg, GPWRDN); + gpwrdn |= GPWRDN_DISCONN_DET_MSK; + gpwrdn |= GPWRDN_LNSTSCHG_MSK; + gpwrdn |= GPWRDN_STS_CHGINT_MSK; + dwc2_writel(hsotg, gpwrdn, GPWRDN); + udelay(10); + + /* Enable Power Down Clamp */ + gpwrdn = dwc2_readl(hsotg, GPWRDN); + gpwrdn |= GPWRDN_PWRDNCLMP; + dwc2_writel(hsotg, gpwrdn, GPWRDN); + udelay(10); + + /* Switch off VDD */ + gpwrdn = dwc2_readl(hsotg, GPWRDN); + gpwrdn |= GPWRDN_PWRDNSWTCH; + dwc2_writel(hsotg, gpwrdn, GPWRDN); + + hsotg->hibernated = 1; + hsotg->bus_suspended = 1; + dev_dbg(hsotg->dev, "Host hibernation completed\n"); + spin_unlock_irqrestore(&hsotg->lock, flags); + return ret; +} + +/* + * dwc2_host_exit_hibernation() + * + * @hsotg: Programming view of the DWC_otg controller + * @rem_wakeup: indicates whether resume is initiated by Device or Host. + * @param reset: indicates whether resume is initiated by Reset. + * + * Return: non-zero if failed to enter to hibernation. + * + * This function is for exiting from Host mode hibernation by + * Host Initiated Resume/Reset and Device Initiated Remote-Wakeup. + */ +int dwc2_host_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup, + int reset) +{ + u32 gpwrdn; + u32 hprt0; + int ret = 0; + struct dwc2_gregs_backup *gr; + struct dwc2_hregs_backup *hr; + + gr = &hsotg->gr_backup; + hr = &hsotg->hr_backup; + + dev_dbg(hsotg->dev, + "%s: called with rem_wakeup = %d reset = %d\n", + __func__, rem_wakeup, reset); + + dwc2_hib_restore_common(hsotg, rem_wakeup, 1); + hsotg->hibernated = 0; + + /* + * This step is not described in functional spec but if not wait for + * this delay, mismatch interrupts occurred because just after restore + * core is in Device mode(gintsts.curmode == 0) + */ + mdelay(100); + + /* Clear all pending interupts */ + dwc2_writel(hsotg, 0xffffffff, GINTSTS); + + /* De-assert Restore */ + gpwrdn = dwc2_readl(hsotg, GPWRDN); + gpwrdn &= ~GPWRDN_RESTORE; + dwc2_writel(hsotg, gpwrdn, GPWRDN); + udelay(10); + + /* Restore GUSBCFG, HCFG */ + dwc2_writel(hsotg, gr->gusbcfg, GUSBCFG); + dwc2_writel(hsotg, hr->hcfg, HCFG); + + /* De-assert Wakeup Logic */ + gpwrdn = dwc2_readl(hsotg, GPWRDN); + gpwrdn &= ~GPWRDN_PMUACTV; + dwc2_writel(hsotg, gpwrdn, GPWRDN); + udelay(10); + + hprt0 = hr->hprt0; + hprt0 |= HPRT0_PWR; + hprt0 &= ~HPRT0_ENA; + hprt0 &= ~HPRT0_SUSP; + dwc2_writel(hsotg, hprt0, HPRT0); + + hprt0 = hr->hprt0; + hprt0 |= HPRT0_PWR; + hprt0 &= ~HPRT0_ENA; + hprt0 &= ~HPRT0_SUSP; + + if (reset) { + hprt0 |= HPRT0_RST; + dwc2_writel(hsotg, hprt0, HPRT0); + + /* Wait for Resume time and then program HPRT again */ + mdelay(60); + hprt0 &= ~HPRT0_RST; + dwc2_writel(hsotg, hprt0, HPRT0); + } else { + hprt0 |= HPRT0_RES; + dwc2_writel(hsotg, hprt0, HPRT0); + + /* Wait for Resume time and then program HPRT again */ + mdelay(100); + hprt0 &= ~HPRT0_RES; + dwc2_writel(hsotg, hprt0, HPRT0); + } + /* Clear all interrupt status */ + hprt0 = dwc2_readl(hsotg, HPRT0); + hprt0 |= HPRT0_CONNDET; + hprt0 |= HPRT0_ENACHG; + hprt0 &= ~HPRT0_ENA; + dwc2_writel(hsotg, hprt0, HPRT0); + + hprt0 = dwc2_readl(hsotg, HPRT0); + + /* Clear all pending interupts */ + dwc2_writel(hsotg, 0xffffffff, GINTSTS); + + /* Restore global registers */ + ret = dwc2_restore_global_registers(hsotg); + if (ret) { + dev_err(hsotg->dev, "%s: failed to restore registers\n", + __func__); + return ret; + } + + /* Restore host registers */ + ret = dwc2_restore_host_registers(hsotg); + if (ret) { + dev_err(hsotg->dev, "%s: failed to restore host registers\n", + __func__); + return ret; + } + + if (rem_wakeup) { + dwc2_hcd_rem_wakeup(hsotg); + /* + * Change "port_connect_status_change" flag to re-enumerate, + * because after exit from hibernation port connection status + * is not detected. + */ + hsotg->flags.b.port_connect_status_change = 1; + } + + hsotg->hibernated = 0; + hsotg->bus_suspended = 0; + hsotg->lx_state = DWC2_L0; + dev_dbg(hsotg->dev, "Host hibernation restore complete\n"); + return ret; +} + +bool dwc2_host_can_poweroff_phy(struct dwc2_hsotg *dwc2) +{ + struct usb_device *root_hub = dwc2_hsotg_to_hcd(dwc2)->self.root_hub; + + /* If the controller isn't allowed to wakeup then we can power off. */ + if (!device_may_wakeup(dwc2->dev)) + return true; + + /* + * We don't want to power off the PHY if something under the + * root hub has wakeup enabled. + */ + if (usb_wakeup_enabled_descendants(root_hub)) + return false; + + /* No reason to keep the PHY powered, so allow poweroff */ + return true; +} + +/** + * dwc2_host_enter_partial_power_down() - Put controller in partial + * power down. + * + * @hsotg: Programming view of the DWC_otg controller + * + * Return: non-zero if failed to enter host partial power down. + * + * This function is for entering Host mode partial power down. + */ +int dwc2_host_enter_partial_power_down(struct dwc2_hsotg *hsotg) +{ + u32 pcgcctl; + u32 hprt0; + int ret = 0; + + dev_dbg(hsotg->dev, "Entering host partial power down started.\n"); + + /* Put this port in suspend mode. */ + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 |= HPRT0_SUSP; + dwc2_writel(hsotg, hprt0, HPRT0); + udelay(5); + + /* Wait for the HPRT0.PrtSusp register field to be set */ + if (dwc2_hsotg_wait_bit_set(hsotg, HPRT0, HPRT0_SUSP, 3000)) + dev_warn(hsotg->dev, "Suspend wasn't generated\n"); + + /* Backup all registers */ + ret = dwc2_backup_global_registers(hsotg); + if (ret) { + dev_err(hsotg->dev, "%s: failed to backup global registers\n", + __func__); + return ret; + } + + ret = dwc2_backup_host_registers(hsotg); + if (ret) { + dev_err(hsotg->dev, "%s: failed to backup host registers\n", + __func__); + return ret; + } + + /* + * Clear any pending interrupts since dwc2 will not be able to + * clear them after entering partial_power_down. + */ + dwc2_writel(hsotg, 0xffffffff, GINTSTS); + + /* Put the controller in low power state */ + pcgcctl = dwc2_readl(hsotg, PCGCTL); + + pcgcctl |= PCGCTL_PWRCLMP; + dwc2_writel(hsotg, pcgcctl, PCGCTL); + udelay(5); + + pcgcctl |= PCGCTL_RSTPDWNMODULE; + dwc2_writel(hsotg, pcgcctl, PCGCTL); + udelay(5); + + pcgcctl |= PCGCTL_STOPPCLK; + dwc2_writel(hsotg, pcgcctl, PCGCTL); + + /* Set in_ppd flag to 1 as here core enters suspend. */ + hsotg->in_ppd = 1; + hsotg->lx_state = DWC2_L2; + hsotg->bus_suspended = true; + + dev_dbg(hsotg->dev, "Entering host partial power down completed.\n"); + + return ret; +} + +/* + * dwc2_host_exit_partial_power_down() - Exit controller from host partial + * power down. + * + * @hsotg: Programming view of the DWC_otg controller + * @rem_wakeup: indicates whether resume is initiated by Reset. + * @restore: indicates whether need to restore the registers or not. + * + * Return: non-zero if failed to exit host partial power down. + * + * This function is for exiting from Host mode partial power down. + */ +int dwc2_host_exit_partial_power_down(struct dwc2_hsotg *hsotg, + int rem_wakeup, bool restore) +{ + u32 pcgcctl; + int ret = 0; + u32 hprt0; + + dev_dbg(hsotg->dev, "Exiting host partial power down started.\n"); + + pcgcctl = dwc2_readl(hsotg, PCGCTL); + pcgcctl &= ~PCGCTL_STOPPCLK; + dwc2_writel(hsotg, pcgcctl, PCGCTL); + udelay(5); + + pcgcctl = dwc2_readl(hsotg, PCGCTL); + pcgcctl &= ~PCGCTL_PWRCLMP; + dwc2_writel(hsotg, pcgcctl, PCGCTL); + udelay(5); + + pcgcctl = dwc2_readl(hsotg, PCGCTL); + pcgcctl &= ~PCGCTL_RSTPDWNMODULE; + dwc2_writel(hsotg, pcgcctl, PCGCTL); + + udelay(100); + if (restore) { + ret = dwc2_restore_global_registers(hsotg); + if (ret) { + dev_err(hsotg->dev, "%s: failed to restore registers\n", + __func__); + return ret; + } + + ret = dwc2_restore_host_registers(hsotg); + if (ret) { + dev_err(hsotg->dev, "%s: failed to restore host registers\n", + __func__); + return ret; + } + } + + /* Drive resume signaling and exit suspend mode on the port. */ + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 |= HPRT0_RES; + hprt0 &= ~HPRT0_SUSP; + dwc2_writel(hsotg, hprt0, HPRT0); + udelay(5); + + if (!rem_wakeup) { + /* Stop driveing resume signaling on the port. */ + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 &= ~HPRT0_RES; + dwc2_writel(hsotg, hprt0, HPRT0); + + hsotg->bus_suspended = false; + } else { + /* Turn on the port power bit. */ + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 |= HPRT0_PWR; + dwc2_writel(hsotg, hprt0, HPRT0); + + /* Connect hcd. */ + dwc2_hcd_connect(hsotg); + + mod_timer(&hsotg->wkp_timer, + jiffies + msecs_to_jiffies(71)); + } + + /* Set lx_state to and in_ppd to 0 as here core exits from suspend. */ + hsotg->in_ppd = 0; + hsotg->lx_state = DWC2_L0; + + dev_dbg(hsotg->dev, "Exiting host partial power down completed.\n"); + return ret; +} + +/** + * dwc2_host_enter_clock_gating() - Put controller in clock gating. + * + * @hsotg: Programming view of the DWC_otg controller + * + * This function is for entering Host mode clock gating. + */ +void dwc2_host_enter_clock_gating(struct dwc2_hsotg *hsotg) +{ + u32 hprt0; + u32 pcgctl; + + dev_dbg(hsotg->dev, "Entering host clock gating.\n"); + + /* Put this port in suspend mode. */ + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 |= HPRT0_SUSP; + dwc2_writel(hsotg, hprt0, HPRT0); + + /* Set the Phy Clock bit as suspend is received. */ + pcgctl = dwc2_readl(hsotg, PCGCTL); + pcgctl |= PCGCTL_STOPPCLK; + dwc2_writel(hsotg, pcgctl, PCGCTL); + udelay(5); + + /* Set the Gate hclk as suspend is received. */ + pcgctl = dwc2_readl(hsotg, PCGCTL); + pcgctl |= PCGCTL_GATEHCLK; + dwc2_writel(hsotg, pcgctl, PCGCTL); + udelay(5); + + hsotg->bus_suspended = true; + hsotg->lx_state = DWC2_L2; +} + +/** + * dwc2_host_exit_clock_gating() - Exit controller from clock gating. + * + * @hsotg: Programming view of the DWC_otg controller + * @rem_wakeup: indicates whether resume is initiated by remote wakeup + * + * This function is for exiting Host mode clock gating. + */ +void dwc2_host_exit_clock_gating(struct dwc2_hsotg *hsotg, int rem_wakeup) +{ + u32 hprt0; + u32 pcgctl; + + dev_dbg(hsotg->dev, "Exiting host clock gating.\n"); + + /* Clear the Gate hclk. */ + pcgctl = dwc2_readl(hsotg, PCGCTL); + pcgctl &= ~PCGCTL_GATEHCLK; + dwc2_writel(hsotg, pcgctl, PCGCTL); + udelay(5); + + /* Phy Clock bit. */ + pcgctl = dwc2_readl(hsotg, PCGCTL); + pcgctl &= ~PCGCTL_STOPPCLK; + dwc2_writel(hsotg, pcgctl, PCGCTL); + udelay(5); + + /* Drive resume signaling and exit suspend mode on the port. */ + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 |= HPRT0_RES; + hprt0 &= ~HPRT0_SUSP; + dwc2_writel(hsotg, hprt0, HPRT0); + udelay(5); + + if (!rem_wakeup) { + /* In case of port resume need to wait for 40 ms */ + msleep(USB_RESUME_TIMEOUT); + + /* Stop driveing resume signaling on the port. */ + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 &= ~HPRT0_RES; + dwc2_writel(hsotg, hprt0, HPRT0); + + hsotg->bus_suspended = false; + hsotg->lx_state = DWC2_L0; + } else { + mod_timer(&hsotg->wkp_timer, + jiffies + msecs_to_jiffies(71)); + } +} diff --git a/drivers/usb/dwc2/hcd.h b/drivers/usb/dwc2/hcd.h new file mode 100644 index 0000000000..b7254d94fd --- /dev/null +++ b/drivers/usb/dwc2/hcd.h @@ -0,0 +1,787 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* + * hcd.h - DesignWare HS OTG Controller host-mode declarations + * + * Copyright (C) 2004-2013 Synopsys, Inc. + */ + +#ifndef __DWC2_HCD_H__ +#define __DWC2_HCD_H__ + +/* + * This file contains the structures, constants, and interfaces for the + * Host Contoller Driver (HCD) + * + * The Host Controller Driver (HCD) is responsible for translating requests + * from the USB Driver into the appropriate actions on the DWC_otg controller. + * It isolates the USBD from the specifics of the controller by providing an + * API to the USBD. + */ + +struct dwc2_qh; + +/** + * struct dwc2_host_chan - Software host channel descriptor + * + * @hc_num: Host channel number, used for register address lookup + * @dev_addr: Address of the device + * @ep_num: Endpoint of the device + * @ep_is_in: Endpoint direction + * @speed: Device speed. One of the following values: + * - USB_SPEED_LOW + * - USB_SPEED_FULL + * - USB_SPEED_HIGH + * @ep_type: Endpoint type. One of the following values: + * - USB_ENDPOINT_XFER_CONTROL: 0 + * - USB_ENDPOINT_XFER_ISOC: 1 + * - USB_ENDPOINT_XFER_BULK: 2 + * - USB_ENDPOINT_XFER_INTR: 3 + * @max_packet: Max packet size in bytes + * @data_pid_start: PID for initial transaction. + * 0: DATA0 + * 1: DATA2 + * 2: DATA1 + * 3: MDATA (non-Control EP), + * SETUP (Control EP) + * @multi_count: Number of additional periodic transactions per + * (micro)frame + * @xfer_buf: Pointer to current transfer buffer position + * @xfer_dma: DMA address of xfer_buf + * @align_buf: In Buffer DMA mode this will be used if xfer_buf is not + * DWORD aligned + * @xfer_len: Total number of bytes to transfer + * @xfer_count: Number of bytes transferred so far + * @start_pkt_count: Packet count at start of transfer + * @xfer_started: True if the transfer has been started + * @do_ping: True if a PING request should be issued on this channel + * @error_state: True if the error count for this transaction is non-zero + * @halt_on_queue: True if this channel should be halted the next time a + * request is queued for the channel. This is necessary in + * slave mode if no request queue space is available when + * an attempt is made to halt the channel. + * @halt_pending: True if the host channel has been halted, but the core + * is not finished flushing queued requests + * @do_split: Enable split for the channel + * @complete_split: Enable complete split + * @hub_addr: Address of high speed hub for the split + * @hub_port: Port of the low/full speed device for the split + * @xact_pos: Split transaction position. One of the following values: + * - DWC2_HCSPLT_XACTPOS_MID + * - DWC2_HCSPLT_XACTPOS_BEGIN + * - DWC2_HCSPLT_XACTPOS_END + * - DWC2_HCSPLT_XACTPOS_ALL + * @requests: Number of requests issued for this channel since it was + * assigned to the current transfer (not counting PINGs) + * @schinfo: Scheduling micro-frame bitmap + * @ntd: Number of transfer descriptors for the transfer + * @halt_status: Reason for halting the host channel + * @hcint: Contents of the HCINT register when the interrupt came + * @qh: QH for the transfer being processed by this channel + * @hc_list_entry: For linking to list of host channels + * @desc_list_addr: Current QH's descriptor list DMA address + * @desc_list_sz: Current QH's descriptor list size + * @split_order_list_entry: List entry for keeping track of the order of splits + * + * This structure represents the state of a single host channel when acting in + * host mode. It contains the data items needed to transfer packets to an + * endpoint via a host channel. + */ +struct dwc2_host_chan { + u8 hc_num; + + unsigned dev_addr:7; + unsigned ep_num:4; + unsigned ep_is_in:1; + unsigned speed:4; + unsigned ep_type:2; + unsigned max_packet:11; + unsigned data_pid_start:2; +#define DWC2_HC_PID_DATA0 TSIZ_SC_MC_PID_DATA0 +#define DWC2_HC_PID_DATA2 TSIZ_SC_MC_PID_DATA2 +#define DWC2_HC_PID_DATA1 TSIZ_SC_MC_PID_DATA1 +#define DWC2_HC_PID_MDATA TSIZ_SC_MC_PID_MDATA +#define DWC2_HC_PID_SETUP TSIZ_SC_MC_PID_SETUP + + unsigned multi_count:2; + + u8 *xfer_buf; + dma_addr_t xfer_dma; + dma_addr_t align_buf; + u32 xfer_len; + u32 xfer_count; + u16 start_pkt_count; + u8 xfer_started; + u8 do_ping; + u8 error_state; + u8 halt_on_queue; + u8 halt_pending; + u8 do_split; + u8 complete_split; + u8 hub_addr; + u8 hub_port; + u8 xact_pos; +#define DWC2_HCSPLT_XACTPOS_MID HCSPLT_XACTPOS_MID +#define DWC2_HCSPLT_XACTPOS_END HCSPLT_XACTPOS_END +#define DWC2_HCSPLT_XACTPOS_BEGIN HCSPLT_XACTPOS_BEGIN +#define DWC2_HCSPLT_XACTPOS_ALL HCSPLT_XACTPOS_ALL + + u8 requests; + u8 schinfo; + u16 ntd; + enum dwc2_halt_status halt_status; + u32 hcint; + struct dwc2_qh *qh; + struct list_head hc_list_entry; + dma_addr_t desc_list_addr; + u32 desc_list_sz; + struct list_head split_order_list_entry; +}; + +struct dwc2_hcd_pipe_info { + u8 dev_addr; + u8 ep_num; + u8 pipe_type; + u8 pipe_dir; + u16 maxp; + u16 maxp_mult; +}; + +struct dwc2_hcd_iso_packet_desc { + u32 offset; + u32 length; + u32 actual_length; + u32 status; +}; + +struct dwc2_qtd; + +struct dwc2_hcd_urb { + void *priv; + struct dwc2_qtd *qtd; + void *buf; + dma_addr_t dma; + void *setup_packet; + dma_addr_t setup_dma; + u32 length; + u32 actual_length; + u32 status; + u32 error_count; + u32 packet_count; + u32 flags; + u16 interval; + struct dwc2_hcd_pipe_info pipe_info; + struct dwc2_hcd_iso_packet_desc iso_descs[]; +}; + +/* Phases for control transfers */ +enum dwc2_control_phase { + DWC2_CONTROL_SETUP, + DWC2_CONTROL_DATA, + DWC2_CONTROL_STATUS, +}; + +/* Transaction types */ +enum dwc2_transaction_type { + DWC2_TRANSACTION_NONE, + DWC2_TRANSACTION_PERIODIC, + DWC2_TRANSACTION_NON_PERIODIC, + DWC2_TRANSACTION_ALL, +}; + +/* The number of elements per LS bitmap (per port on multi_tt) */ +#define DWC2_ELEMENTS_PER_LS_BITMAP DIV_ROUND_UP(DWC2_LS_SCHEDULE_SLICES, \ + BITS_PER_LONG) + +/** + * struct dwc2_tt - dwc2 data associated with a usb_tt + * + * @refcount: Number of Queue Heads (QHs) holding a reference. + * @usb_tt: Pointer back to the official usb_tt. + * @periodic_bitmaps: Bitmap for which parts of the 1ms frame are accounted + * for already. Each is DWC2_ELEMENTS_PER_LS_BITMAP + * elements (so sizeof(long) times that in bytes). + * + * This structure is stored in the hcpriv of the official usb_tt. + */ +struct dwc2_tt { + int refcount; + struct usb_tt *usb_tt; + unsigned long periodic_bitmaps[]; +}; + +/** + * struct dwc2_hs_transfer_time - Info about a transfer on the high speed bus. + * + * @start_schedule_us: The start time on the main bus schedule. Note that + * the main bus schedule is tightly packed and this + * time should be interpreted as tightly packed (so + * uFrame 0 starts at 0 us, uFrame 1 starts at 100 us + * instead of 125 us). + * @duration_us: How long this transfer goes. + */ + +struct dwc2_hs_transfer_time { + u32 start_schedule_us; + u16 duration_us; +}; + +/** + * struct dwc2_qh - Software queue head structure + * + * @hsotg: The HCD state structure for the DWC OTG controller + * @ep_type: Endpoint type. One of the following values: + * - USB_ENDPOINT_XFER_CONTROL + * - USB_ENDPOINT_XFER_BULK + * - USB_ENDPOINT_XFER_INT + * - USB_ENDPOINT_XFER_ISOC + * @ep_is_in: Endpoint direction + * @maxp: Value from wMaxPacketSize field of Endpoint Descriptor + * @maxp_mult: Multiplier for maxp + * @dev_speed: Device speed. One of the following values: + * - USB_SPEED_LOW + * - USB_SPEED_FULL + * - USB_SPEED_HIGH + * @data_toggle: Determines the PID of the next data packet for + * non-controltransfers. Ignored for control transfers. + * One of the following values: + * - DWC2_HC_PID_DATA0 + * - DWC2_HC_PID_DATA1 + * @ping_state: Ping state + * @do_split: Full/low speed endpoint on high-speed hub requires split + * @td_first: Index of first activated isochronous transfer descriptor + * @td_last: Index of last activated isochronous transfer descriptor + * @host_us: Bandwidth in microseconds per transfer as seen by host + * @device_us: Bandwidth in microseconds per transfer as seen by device + * @host_interval: Interval between transfers as seen by the host. If + * the host is high speed and the device is low speed this + * will be 8 times device interval. + * @device_interval: Interval between transfers as seen by the device. + * interval. + * @next_active_frame: (Micro)frame _before_ we next need to put something on + * the bus. We'll move the qh to active here. If the + * host is in high speed mode this will be a uframe. If + * the host is in low speed mode this will be a full frame. + * @start_active_frame: If we are partway through a split transfer, this will be + * what next_active_frame was when we started. Otherwise + * it should always be the same as next_active_frame. + * @num_hs_transfers: Number of transfers in hs_transfers. + * Normally this is 1 but can be more than one for splits. + * Always >= 1 unless the host is in low/full speed mode. + * @hs_transfers: Transfers that are scheduled as seen by the high speed + * bus. Not used if host is in low or full speed mode (but + * note that it IS USED if the device is low or full speed + * as long as the HOST is in high speed mode). + * @ls_start_schedule_slice: Start time (in slices) on the low speed bus + * schedule that's being used by this device. This + * will be on the periodic_bitmap in a + * "struct dwc2_tt". Not used if this device is high + * speed. Note that this is in "schedule slice" which + * is tightly packed. + * @ntd: Actual number of transfer descriptors in a list + * @dw_align_buf: Used instead of original buffer if its physical address + * is not dword-aligned + * @dw_align_buf_dma: DMA address for dw_align_buf + * @qtd_list: List of QTDs for this QH + * @channel: Host channel currently processing transfers for this QH + * @qh_list_entry: Entry for QH in either the periodic or non-periodic + * schedule + * @desc_list: List of transfer descriptors + * @desc_list_dma: Physical address of desc_list + * @desc_list_sz: Size of descriptors list + * @n_bytes: Xfer Bytes array. Each element corresponds to a transfer + * descriptor and indicates original XferSize value for the + * descriptor + * @unreserve_timer: Timer for releasing periodic reservation. + * @wait_timer: Timer used to wait before re-queuing. + * @dwc_tt: Pointer to our tt info (or NULL if no tt). + * @ttport: Port number within our tt. + * @tt_buffer_dirty True if clear_tt_buffer_complete is pending + * @unreserve_pending: True if we planned to unreserve but haven't yet. + * @schedule_low_speed: True if we have a low/full speed component (either the + * host is in low/full speed mode or do_split). + * @want_wait: We should wait before re-queuing; only matters for non- + * periodic transfers and is ignored for periodic ones. + * @wait_timer_cancel: Set to true to cancel the wait_timer. + * + * @tt_buffer_dirty: True if EP's TT buffer is not clean. + * A Queue Head (QH) holds the static characteristics of an endpoint and + * maintains a list of transfers (QTDs) for that endpoint. A QH structure may + * be entered in either the non-periodic or periodic schedule. + */ +struct dwc2_qh { + struct dwc2_hsotg *hsotg; + u8 ep_type; + u8 ep_is_in; + u16 maxp; + u16 maxp_mult; + u8 dev_speed; + u8 data_toggle; + u8 ping_state; + u8 do_split; + u8 td_first; + u8 td_last; + u16 host_us; + u16 device_us; + u16 host_interval; + u16 device_interval; + u16 next_active_frame; + u16 start_active_frame; + s16 num_hs_transfers; + struct dwc2_hs_transfer_time hs_transfers[DWC2_HS_SCHEDULE_UFRAMES]; + u32 ls_start_schedule_slice; + u16 ntd; + u8 *dw_align_buf; + dma_addr_t dw_align_buf_dma; + struct list_head qtd_list; + struct dwc2_host_chan *channel; + struct list_head qh_list_entry; + struct dwc2_dma_desc *desc_list; + dma_addr_t desc_list_dma; + u32 desc_list_sz; + u32 *n_bytes; + struct timer_list unreserve_timer; + struct hrtimer wait_timer; + struct dwc2_tt *dwc_tt; + int ttport; + unsigned tt_buffer_dirty:1; + unsigned unreserve_pending:1; + unsigned schedule_low_speed:1; + unsigned want_wait:1; + unsigned wait_timer_cancel:1; +}; + +/** + * struct dwc2_qtd - Software queue transfer descriptor (QTD) + * + * @control_phase: Current phase for control transfers (Setup, Data, or + * Status) + * @in_process: Indicates if this QTD is currently processed by HW + * @data_toggle: Determines the PID of the next data packet for the + * data phase of control transfers. Ignored for other + * transfer types. One of the following values: + * - DWC2_HC_PID_DATA0 + * - DWC2_HC_PID_DATA1 + * @complete_split: Keeps track of the current split type for FS/LS + * endpoints on a HS Hub + * @isoc_split_pos: Position of the ISOC split in full/low speed + * @isoc_frame_index: Index of the next frame descriptor for an isochronous + * transfer. A frame descriptor describes the buffer + * position and length of the data to be transferred in the + * next scheduled (micro)frame of an isochronous transfer. + * It also holds status for that transaction. The frame + * index starts at 0. + * @isoc_split_offset: Position of the ISOC split in the buffer for the + * current frame + * @ssplit_out_xfer_count: How many bytes transferred during SSPLIT OUT + * @error_count: Holds the number of bus errors that have occurred for + * a transaction within this transfer + * @n_desc: Number of DMA descriptors for this QTD + * @isoc_frame_index_last: Last activated frame (packet) index, used in + * descriptor DMA mode only + * @num_naks: Number of NAKs received on this QTD. + * @urb: URB for this transfer + * @qh: Queue head for this QTD + * @qtd_list_entry: For linking to the QH's list of QTDs + * @isoc_td_first: Index of first activated isochronous transfer + * descriptor in Descriptor DMA mode + * @isoc_td_last: Index of last activated isochronous transfer + * descriptor in Descriptor DMA mode + * + * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control, + * interrupt, or isochronous transfer. A single QTD is created for each URB + * (of one of these types) submitted to the HCD. The transfer associated with + * a QTD may require one or multiple transactions. + * + * A QTD is linked to a Queue Head, which is entered in either the + * non-periodic or periodic schedule for execution. When a QTD is chosen for + * execution, some or all of its transactions may be executed. After + * execution, the state of the QTD is updated. The QTD may be retired if all + * its transactions are complete or if an error occurred. Otherwise, it + * remains in the schedule so more transactions can be executed later. + */ +struct dwc2_qtd { + enum dwc2_control_phase control_phase; + u8 in_process; + u8 data_toggle; + u8 complete_split; + u8 isoc_split_pos; + u16 isoc_frame_index; + u16 isoc_split_offset; + u16 isoc_td_last; + u16 isoc_td_first; + u32 ssplit_out_xfer_count; + u8 error_count; + u8 n_desc; + u16 isoc_frame_index_last; + u16 num_naks; + struct dwc2_hcd_urb *urb; + struct dwc2_qh *qh; + struct list_head qtd_list_entry; +}; + +#ifdef DEBUG +struct hc_xfer_info { + struct dwc2_hsotg *hsotg; + struct dwc2_host_chan *chan; +}; +#endif + +u32 dwc2_calc_frame_interval(struct dwc2_hsotg *hsotg); + +/* Gets the struct usb_hcd that contains a struct dwc2_hsotg */ +static inline struct usb_hcd *dwc2_hsotg_to_hcd(struct dwc2_hsotg *hsotg) +{ + return (struct usb_hcd *)hsotg->priv; +} + +/* + * Inline used to disable one channel interrupt. Channel interrupts are + * disabled when the channel is halted or released by the interrupt handler. + * There is no need to handle further interrupts of that type until the + * channel is re-assigned. In fact, subsequent handling may cause crashes + * because the channel structures are cleaned up when the channel is released. + */ +static inline void disable_hc_int(struct dwc2_hsotg *hsotg, int chnum, u32 intr) +{ + u32 mask = dwc2_readl(hsotg, HCINTMSK(chnum)); + + mask &= ~intr; + dwc2_writel(hsotg, mask, HCINTMSK(chnum)); +} + +void dwc2_hc_cleanup(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan); +void dwc2_hc_halt(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan, + enum dwc2_halt_status halt_status); +void dwc2_hc_start_transfer_ddma(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan); + +/* + * Reads HPRT0 in preparation to modify. It keeps the WC bits 0 so that if they + * are read as 1, they won't clear when written back. + */ +static inline u32 dwc2_read_hprt0(struct dwc2_hsotg *hsotg) +{ + u32 hprt0 = dwc2_readl(hsotg, HPRT0); + + hprt0 &= ~(HPRT0_ENA | HPRT0_CONNDET | HPRT0_ENACHG | HPRT0_OVRCURRCHG); + return hprt0; +} + +static inline u8 dwc2_hcd_get_ep_num(struct dwc2_hcd_pipe_info *pipe) +{ + return pipe->ep_num; +} + +static inline u8 dwc2_hcd_get_pipe_type(struct dwc2_hcd_pipe_info *pipe) +{ + return pipe->pipe_type; +} + +static inline u16 dwc2_hcd_get_maxp(struct dwc2_hcd_pipe_info *pipe) +{ + return pipe->maxp; +} + +static inline u16 dwc2_hcd_get_maxp_mult(struct dwc2_hcd_pipe_info *pipe) +{ + return pipe->maxp_mult; +} + +static inline u8 dwc2_hcd_get_dev_addr(struct dwc2_hcd_pipe_info *pipe) +{ + return pipe->dev_addr; +} + +static inline u8 dwc2_hcd_is_pipe_isoc(struct dwc2_hcd_pipe_info *pipe) +{ + return pipe->pipe_type == USB_ENDPOINT_XFER_ISOC; +} + +static inline u8 dwc2_hcd_is_pipe_int(struct dwc2_hcd_pipe_info *pipe) +{ + return pipe->pipe_type == USB_ENDPOINT_XFER_INT; +} + +static inline u8 dwc2_hcd_is_pipe_bulk(struct dwc2_hcd_pipe_info *pipe) +{ + return pipe->pipe_type == USB_ENDPOINT_XFER_BULK; +} + +static inline u8 dwc2_hcd_is_pipe_control(struct dwc2_hcd_pipe_info *pipe) +{ + return pipe->pipe_type == USB_ENDPOINT_XFER_CONTROL; +} + +static inline u8 dwc2_hcd_is_pipe_in(struct dwc2_hcd_pipe_info *pipe) +{ + return pipe->pipe_dir == USB_DIR_IN; +} + +static inline u8 dwc2_hcd_is_pipe_out(struct dwc2_hcd_pipe_info *pipe) +{ + return !dwc2_hcd_is_pipe_in(pipe); +} + +int dwc2_hcd_init(struct dwc2_hsotg *hsotg); +void dwc2_hcd_remove(struct dwc2_hsotg *hsotg); + +/* Transaction Execution Functions */ +enum dwc2_transaction_type dwc2_hcd_select_transactions( + struct dwc2_hsotg *hsotg); +void dwc2_hcd_queue_transactions(struct dwc2_hsotg *hsotg, + enum dwc2_transaction_type tr_type); + +/* Schedule Queue Functions */ +/* Implemented in hcd_queue.c */ +struct dwc2_qh *dwc2_hcd_qh_create(struct dwc2_hsotg *hsotg, + struct dwc2_hcd_urb *urb, + gfp_t mem_flags); +void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh); +int dwc2_hcd_qh_add(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh); +void dwc2_hcd_qh_unlink(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh); +void dwc2_hcd_qh_deactivate(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, + int sched_csplit); + +void dwc2_hcd_qtd_init(struct dwc2_qtd *qtd, struct dwc2_hcd_urb *urb); +int dwc2_hcd_qtd_add(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd, + struct dwc2_qh *qh); + +/* Unlinks and frees a QTD */ +static inline void dwc2_hcd_qtd_unlink_and_free(struct dwc2_hsotg *hsotg, + struct dwc2_qtd *qtd, + struct dwc2_qh *qh) +{ + list_del(&qtd->qtd_list_entry); + kfree(qtd); +} + +/* Descriptor DMA support functions */ +void dwc2_hcd_start_xfer_ddma(struct dwc2_hsotg *hsotg, + struct dwc2_qh *qh); +void dwc2_hcd_complete_xfer_ddma(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + enum dwc2_halt_status halt_status); + +int dwc2_hcd_qh_init_ddma(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, + gfp_t mem_flags); +void dwc2_hcd_qh_free_ddma(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh); + +/* Check if QH is non-periodic */ +#define dwc2_qh_is_non_per(_qh_ptr_) \ + ((_qh_ptr_)->ep_type == USB_ENDPOINT_XFER_BULK || \ + (_qh_ptr_)->ep_type == USB_ENDPOINT_XFER_CONTROL) + +#ifdef CONFIG_USB_DWC2_DEBUG_PERIODIC +static inline bool dbg_hc(struct dwc2_host_chan *hc) { return true; } +static inline bool dbg_qh(struct dwc2_qh *qh) { return true; } +static inline bool dbg_urb(struct urb *urb) { return true; } +static inline bool dbg_perio(void) { return true; } +#else /* !CONFIG_USB_DWC2_DEBUG_PERIODIC */ +static inline bool dbg_hc(struct dwc2_host_chan *hc) +{ + return hc->ep_type == USB_ENDPOINT_XFER_BULK || + hc->ep_type == USB_ENDPOINT_XFER_CONTROL; +} + +static inline bool dbg_qh(struct dwc2_qh *qh) +{ + return qh->ep_type == USB_ENDPOINT_XFER_BULK || + qh->ep_type == USB_ENDPOINT_XFER_CONTROL; +} + +static inline bool dbg_urb(struct urb *urb) +{ + return usb_pipetype(urb->pipe) == PIPE_BULK || + usb_pipetype(urb->pipe) == PIPE_CONTROL; +} + +static inline bool dbg_perio(void) { return false; } +#endif + +/* + * Returns true if frame1 index is greater than frame2 index. The comparison + * is done modulo FRLISTEN_64_SIZE. This accounts for the rollover of the + * frame number when the max index frame number is reached. + */ +static inline bool dwc2_frame_idx_num_gt(u16 fr_idx1, u16 fr_idx2) +{ + u16 diff = fr_idx1 - fr_idx2; + u16 sign = diff & (FRLISTEN_64_SIZE >> 1); + + return diff && !sign; +} + +/* + * Returns true if frame1 is less than or equal to frame2. The comparison is + * done modulo HFNUM_MAX_FRNUM. This accounts for the rollover of the + * frame number when the max frame number is reached. + */ +static inline int dwc2_frame_num_le(u16 frame1, u16 frame2) +{ + return ((frame2 - frame1) & HFNUM_MAX_FRNUM) <= (HFNUM_MAX_FRNUM >> 1); +} + +/* + * Returns true if frame1 is greater than frame2. The comparison is done + * modulo HFNUM_MAX_FRNUM. This accounts for the rollover of the frame + * number when the max frame number is reached. + */ +static inline int dwc2_frame_num_gt(u16 frame1, u16 frame2) +{ + return (frame1 != frame2) && + ((frame1 - frame2) & HFNUM_MAX_FRNUM) < (HFNUM_MAX_FRNUM >> 1); +} + +/* + * Increments frame by the amount specified by inc. The addition is done + * modulo HFNUM_MAX_FRNUM. Returns the incremented value. + */ +static inline u16 dwc2_frame_num_inc(u16 frame, u16 inc) +{ + return (frame + inc) & HFNUM_MAX_FRNUM; +} + +static inline u16 dwc2_frame_num_dec(u16 frame, u16 dec) +{ + return (frame + HFNUM_MAX_FRNUM + 1 - dec) & HFNUM_MAX_FRNUM; +} + +static inline u16 dwc2_full_frame_num(u16 frame) +{ + return (frame & HFNUM_MAX_FRNUM) >> 3; +} + +static inline u16 dwc2_micro_frame_num(u16 frame) +{ + return frame & 0x7; +} + +/* + * Returns the Core Interrupt Status register contents, ANDed with the Core + * Interrupt Mask register contents + */ +static inline u32 dwc2_read_core_intr(struct dwc2_hsotg *hsotg) +{ + return dwc2_readl(hsotg, GINTSTS) & + dwc2_readl(hsotg, GINTMSK); +} + +static inline u32 dwc2_hcd_urb_get_status(struct dwc2_hcd_urb *dwc2_urb) +{ + return dwc2_urb->status; +} + +static inline u32 dwc2_hcd_urb_get_actual_length( + struct dwc2_hcd_urb *dwc2_urb) +{ + return dwc2_urb->actual_length; +} + +static inline u32 dwc2_hcd_urb_get_error_count(struct dwc2_hcd_urb *dwc2_urb) +{ + return dwc2_urb->error_count; +} + +static inline void dwc2_hcd_urb_set_iso_desc_params( + struct dwc2_hcd_urb *dwc2_urb, int desc_num, u32 offset, + u32 length) +{ + dwc2_urb->iso_descs[desc_num].offset = offset; + dwc2_urb->iso_descs[desc_num].length = length; +} + +static inline u32 dwc2_hcd_urb_get_iso_desc_status( + struct dwc2_hcd_urb *dwc2_urb, int desc_num) +{ + return dwc2_urb->iso_descs[desc_num].status; +} + +static inline u32 dwc2_hcd_urb_get_iso_desc_actual_length( + struct dwc2_hcd_urb *dwc2_urb, int desc_num) +{ + return dwc2_urb->iso_descs[desc_num].actual_length; +} + +static inline int dwc2_hcd_is_bandwidth_allocated(struct dwc2_hsotg *hsotg, + struct usb_host_endpoint *ep) +{ + struct dwc2_qh *qh = ep->hcpriv; + + if (qh && !list_empty(&qh->qh_list_entry)) + return 1; + + return 0; +} + +static inline u16 dwc2_hcd_get_ep_bandwidth(struct dwc2_hsotg *hsotg, + struct usb_host_endpoint *ep) +{ + struct dwc2_qh *qh = ep->hcpriv; + + if (!qh) { + WARN_ON(1); + return 0; + } + + return qh->host_us; +} + +void dwc2_hcd_save_data_toggle(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd); + +/* HCD Core API */ + +/** + * dwc2_handle_hcd_intr() - Called on every hardware interrupt + * + * @hsotg: The DWC2 HCD + * + * Returns IRQ_HANDLED if interrupt is handled + * Return IRQ_NONE if interrupt is not handled + */ +irqreturn_t dwc2_handle_hcd_intr(struct dwc2_hsotg *hsotg); + +/** + * dwc2_hcd_stop() - Halts the DWC_otg host mode operation + * + * @hsotg: The DWC2 HCD + */ +void dwc2_hcd_stop(struct dwc2_hsotg *hsotg); + +/** + * dwc2_hcd_is_b_host() - Returns 1 if core currently is acting as B host, + * and 0 otherwise + * + * @hsotg: The DWC2 HCD + */ +int dwc2_hcd_is_b_host(struct dwc2_hsotg *hsotg); + +/** + * dwc2_hcd_dump_state() - Dumps hsotg state + * + * @hsotg: The DWC2 HCD + * + * NOTE: This function will be removed once the peripheral controller code + * is integrated and the driver is stable + */ +void dwc2_hcd_dump_state(struct dwc2_hsotg *hsotg); + +/* URB interface */ + +/* Transfer flags */ +#define URB_GIVEBACK_ASAP 0x1 +#define URB_SEND_ZERO_PACKET 0x2 + +/* Host driver callbacks */ +struct dwc2_tt *dwc2_host_get_tt_info(struct dwc2_hsotg *hsotg, + void *context, gfp_t mem_flags, + int *ttport); + +void dwc2_host_put_tt_info(struct dwc2_hsotg *hsotg, + struct dwc2_tt *dwc_tt); +int dwc2_host_get_speed(struct dwc2_hsotg *hsotg, void *context); +void dwc2_host_complete(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd, + int status); + +#endif /* __DWC2_HCD_H__ */ diff --git a/drivers/usb/dwc2/hcd_ddma.c b/drivers/usb/dwc2/hcd_ddma.c new file mode 100644 index 0000000000..6b4d825e97 --- /dev/null +++ b/drivers/usb/dwc2/hcd_ddma.c @@ -0,0 +1,1347 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * hcd_ddma.c - DesignWare HS OTG Controller descriptor DMA routines + * + * Copyright (C) 2004-2013 Synopsys, Inc. + */ + +/* + * This file contains the Descriptor DMA implementation for Host mode + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/usb.h> + +#include <linux/usb/hcd.h> +#include <linux/usb/ch11.h> + +#include "core.h" +#include "hcd.h" + +static u16 dwc2_frame_list_idx(u16 frame) +{ + return frame & (FRLISTEN_64_SIZE - 1); +} + +static u16 dwc2_desclist_idx_inc(u16 idx, u16 inc, u8 speed) +{ + return (idx + inc) & + ((speed == USB_SPEED_HIGH ? MAX_DMA_DESC_NUM_HS_ISOC : + MAX_DMA_DESC_NUM_GENERIC) - 1); +} + +static u16 dwc2_desclist_idx_dec(u16 idx, u16 inc, u8 speed) +{ + return (idx - inc) & + ((speed == USB_SPEED_HIGH ? MAX_DMA_DESC_NUM_HS_ISOC : + MAX_DMA_DESC_NUM_GENERIC) - 1); +} + +static u16 dwc2_max_desc_num(struct dwc2_qh *qh) +{ + return (qh->ep_type == USB_ENDPOINT_XFER_ISOC && + qh->dev_speed == USB_SPEED_HIGH) ? + MAX_DMA_DESC_NUM_HS_ISOC : MAX_DMA_DESC_NUM_GENERIC; +} + +static u16 dwc2_frame_incr_val(struct dwc2_qh *qh) +{ + return qh->dev_speed == USB_SPEED_HIGH ? + (qh->host_interval + 8 - 1) / 8 : qh->host_interval; +} + +static int dwc2_desc_list_alloc(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, + gfp_t flags) +{ + struct kmem_cache *desc_cache; + + if (qh->ep_type == USB_ENDPOINT_XFER_ISOC && + qh->dev_speed == USB_SPEED_HIGH) + desc_cache = hsotg->desc_hsisoc_cache; + else + desc_cache = hsotg->desc_gen_cache; + + qh->desc_list_sz = sizeof(struct dwc2_dma_desc) * + dwc2_max_desc_num(qh); + + qh->desc_list = kmem_cache_zalloc(desc_cache, flags | GFP_DMA); + if (!qh->desc_list) + return -ENOMEM; + + qh->desc_list_dma = dma_map_single(hsotg->dev, qh->desc_list, + qh->desc_list_sz, + DMA_TO_DEVICE); + + qh->n_bytes = kcalloc(dwc2_max_desc_num(qh), sizeof(u32), flags); + if (!qh->n_bytes) { + dma_unmap_single(hsotg->dev, qh->desc_list_dma, + qh->desc_list_sz, + DMA_FROM_DEVICE); + kmem_cache_free(desc_cache, qh->desc_list); + qh->desc_list = NULL; + return -ENOMEM; + } + + return 0; +} + +static void dwc2_desc_list_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) +{ + struct kmem_cache *desc_cache; + + if (qh->ep_type == USB_ENDPOINT_XFER_ISOC && + qh->dev_speed == USB_SPEED_HIGH) + desc_cache = hsotg->desc_hsisoc_cache; + else + desc_cache = hsotg->desc_gen_cache; + + if (qh->desc_list) { + dma_unmap_single(hsotg->dev, qh->desc_list_dma, + qh->desc_list_sz, DMA_FROM_DEVICE); + kmem_cache_free(desc_cache, qh->desc_list); + qh->desc_list = NULL; + } + + kfree(qh->n_bytes); + qh->n_bytes = NULL; +} + +static int dwc2_frame_list_alloc(struct dwc2_hsotg *hsotg, gfp_t mem_flags) +{ + if (hsotg->frame_list) + return 0; + + hsotg->frame_list_sz = 4 * FRLISTEN_64_SIZE; + hsotg->frame_list = kzalloc(hsotg->frame_list_sz, GFP_ATOMIC | GFP_DMA); + if (!hsotg->frame_list) + return -ENOMEM; + + hsotg->frame_list_dma = dma_map_single(hsotg->dev, hsotg->frame_list, + hsotg->frame_list_sz, + DMA_TO_DEVICE); + + return 0; +} + +static void dwc2_frame_list_free(struct dwc2_hsotg *hsotg) +{ + unsigned long flags; + + spin_lock_irqsave(&hsotg->lock, flags); + + if (!hsotg->frame_list) { + spin_unlock_irqrestore(&hsotg->lock, flags); + return; + } + + dma_unmap_single(hsotg->dev, hsotg->frame_list_dma, + hsotg->frame_list_sz, DMA_FROM_DEVICE); + + kfree(hsotg->frame_list); + hsotg->frame_list = NULL; + + spin_unlock_irqrestore(&hsotg->lock, flags); +} + +static void dwc2_per_sched_enable(struct dwc2_hsotg *hsotg, u32 fr_list_en) +{ + u32 hcfg; + unsigned long flags; + + spin_lock_irqsave(&hsotg->lock, flags); + + hcfg = dwc2_readl(hsotg, HCFG); + if (hcfg & HCFG_PERSCHEDENA) { + /* already enabled */ + spin_unlock_irqrestore(&hsotg->lock, flags); + return; + } + + dwc2_writel(hsotg, hsotg->frame_list_dma, HFLBADDR); + + hcfg &= ~HCFG_FRLISTEN_MASK; + hcfg |= fr_list_en | HCFG_PERSCHEDENA; + dev_vdbg(hsotg->dev, "Enabling Periodic schedule\n"); + dwc2_writel(hsotg, hcfg, HCFG); + + spin_unlock_irqrestore(&hsotg->lock, flags); +} + +static void dwc2_per_sched_disable(struct dwc2_hsotg *hsotg) +{ + u32 hcfg; + unsigned long flags; + + spin_lock_irqsave(&hsotg->lock, flags); + + hcfg = dwc2_readl(hsotg, HCFG); + if (!(hcfg & HCFG_PERSCHEDENA)) { + /* already disabled */ + spin_unlock_irqrestore(&hsotg->lock, flags); + return; + } + + hcfg &= ~HCFG_PERSCHEDENA; + dev_vdbg(hsotg->dev, "Disabling Periodic schedule\n"); + dwc2_writel(hsotg, hcfg, HCFG); + + spin_unlock_irqrestore(&hsotg->lock, flags); +} + +/* + * Activates/Deactivates FrameList entries for the channel based on endpoint + * servicing period + */ +static void dwc2_update_frame_list(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, + int enable) +{ + struct dwc2_host_chan *chan; + u16 i, j, inc; + + if (!hsotg) { + pr_err("hsotg = %p\n", hsotg); + return; + } + + if (!qh->channel) { + dev_err(hsotg->dev, "qh->channel = %p\n", qh->channel); + return; + } + + if (!hsotg->frame_list) { + dev_err(hsotg->dev, "hsotg->frame_list = %p\n", + hsotg->frame_list); + return; + } + + chan = qh->channel; + inc = dwc2_frame_incr_val(qh); + if (qh->ep_type == USB_ENDPOINT_XFER_ISOC) + i = dwc2_frame_list_idx(qh->next_active_frame); + else + i = 0; + + j = i; + do { + if (enable) + hsotg->frame_list[j] |= 1 << chan->hc_num; + else + hsotg->frame_list[j] &= ~(1 << chan->hc_num); + j = (j + inc) & (FRLISTEN_64_SIZE - 1); + } while (j != i); + + /* + * Sync frame list since controller will access it if periodic + * channel is currently enabled. + */ + dma_sync_single_for_device(hsotg->dev, + hsotg->frame_list_dma, + hsotg->frame_list_sz, + DMA_TO_DEVICE); + + if (!enable) + return; + + chan->schinfo = 0; + if (chan->speed == USB_SPEED_HIGH && qh->host_interval) { + j = 1; + /* TODO - check this */ + inc = (8 + qh->host_interval - 1) / qh->host_interval; + for (i = 0; i < inc; i++) { + chan->schinfo |= j; + j = j << qh->host_interval; + } + } else { + chan->schinfo = 0xff; + } +} + +static void dwc2_release_channel_ddma(struct dwc2_hsotg *hsotg, + struct dwc2_qh *qh) +{ + struct dwc2_host_chan *chan = qh->channel; + + if (dwc2_qh_is_non_per(qh)) { + if (hsotg->params.uframe_sched) + hsotg->available_host_channels++; + else + hsotg->non_periodic_channels--; + } else { + dwc2_update_frame_list(hsotg, qh, 0); + hsotg->available_host_channels++; + } + + /* + * The condition is added to prevent double cleanup try in case of + * device disconnect. See channel cleanup in dwc2_hcd_disconnect(). + */ + if (chan->qh) { + if (!list_empty(&chan->hc_list_entry)) + list_del(&chan->hc_list_entry); + dwc2_hc_cleanup(hsotg, chan); + list_add_tail(&chan->hc_list_entry, &hsotg->free_hc_list); + chan->qh = NULL; + } + + qh->channel = NULL; + qh->ntd = 0; + + if (qh->desc_list) + memset(qh->desc_list, 0, sizeof(struct dwc2_dma_desc) * + dwc2_max_desc_num(qh)); +} + +/** + * dwc2_hcd_qh_init_ddma() - Initializes a QH structure's Descriptor DMA + * related members + * + * @hsotg: The HCD state structure for the DWC OTG controller + * @qh: The QH to init + * @mem_flags: Indicates the type of memory allocation + * + * Return: 0 if successful, negative error code otherwise + * + * Allocates memory for the descriptor list. For the first periodic QH, + * allocates memory for the FrameList and enables periodic scheduling. + */ +int dwc2_hcd_qh_init_ddma(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, + gfp_t mem_flags) +{ + int retval; + + if (qh->do_split) { + dev_err(hsotg->dev, + "SPLIT Transfers are not supported in Descriptor DMA mode.\n"); + retval = -EINVAL; + goto err0; + } + + retval = dwc2_desc_list_alloc(hsotg, qh, mem_flags); + if (retval) + goto err0; + + if (qh->ep_type == USB_ENDPOINT_XFER_ISOC || + qh->ep_type == USB_ENDPOINT_XFER_INT) { + if (!hsotg->frame_list) { + retval = dwc2_frame_list_alloc(hsotg, mem_flags); + if (retval) + goto err1; + /* Enable periodic schedule on first periodic QH */ + dwc2_per_sched_enable(hsotg, HCFG_FRLISTEN_64); + } + } + + qh->ntd = 0; + return 0; + +err1: + dwc2_desc_list_free(hsotg, qh); +err0: + return retval; +} + +/** + * dwc2_hcd_qh_free_ddma() - Frees a QH structure's Descriptor DMA related + * members + * + * @hsotg: The HCD state structure for the DWC OTG controller + * @qh: The QH to free + * + * Frees descriptor list memory associated with the QH. If QH is periodic and + * the last, frees FrameList memory and disables periodic scheduling. + */ +void dwc2_hcd_qh_free_ddma(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) +{ + unsigned long flags; + + dwc2_desc_list_free(hsotg, qh); + + /* + * Channel still assigned due to some reasons. + * Seen on Isoc URB dequeue. Channel halted but no subsequent + * ChHalted interrupt to release the channel. Afterwards + * when it comes here from endpoint disable routine + * channel remains assigned. + */ + spin_lock_irqsave(&hsotg->lock, flags); + if (qh->channel) + dwc2_release_channel_ddma(hsotg, qh); + spin_unlock_irqrestore(&hsotg->lock, flags); + + if ((qh->ep_type == USB_ENDPOINT_XFER_ISOC || + qh->ep_type == USB_ENDPOINT_XFER_INT) && + (hsotg->params.uframe_sched || + !hsotg->periodic_channels) && hsotg->frame_list) { + dwc2_per_sched_disable(hsotg); + dwc2_frame_list_free(hsotg); + } +} + +static u8 dwc2_frame_to_desc_idx(struct dwc2_qh *qh, u16 frame_idx) +{ + if (qh->dev_speed == USB_SPEED_HIGH) + /* Descriptor set (8 descriptors) index which is 8-aligned */ + return (frame_idx & ((MAX_DMA_DESC_NUM_HS_ISOC / 8) - 1)) * 8; + else + return frame_idx & (MAX_DMA_DESC_NUM_GENERIC - 1); +} + +/* + * Determine starting frame for Isochronous transfer. + * Few frames skipped to prevent race condition with HC. + */ +static u16 dwc2_calc_starting_frame(struct dwc2_hsotg *hsotg, + struct dwc2_qh *qh, u16 *skip_frames) +{ + u16 frame; + + hsotg->frame_number = dwc2_hcd_get_frame_number(hsotg); + + /* + * next_active_frame is always frame number (not uFrame) both in FS + * and HS! + */ + + /* + * skip_frames is used to limit activated descriptors number + * to avoid the situation when HC services the last activated + * descriptor firstly. + * Example for FS: + * Current frame is 1, scheduled frame is 3. Since HC always fetches + * the descriptor corresponding to curr_frame+1, the descriptor + * corresponding to frame 2 will be fetched. If the number of + * descriptors is max=64 (or greather) the list will be fully programmed + * with Active descriptors and it is possible case (rare) that the + * latest descriptor(considering rollback) corresponding to frame 2 will + * be serviced first. HS case is more probable because, in fact, up to + * 11 uframes (16 in the code) may be skipped. + */ + if (qh->dev_speed == USB_SPEED_HIGH) { + /* + * Consider uframe counter also, to start xfer asap. If half of + * the frame elapsed skip 2 frames otherwise just 1 frame. + * Starting descriptor index must be 8-aligned, so if the + * current frame is near to complete the next one is skipped as + * well. + */ + if (dwc2_micro_frame_num(hsotg->frame_number) >= 5) { + *skip_frames = 2 * 8; + frame = dwc2_frame_num_inc(hsotg->frame_number, + *skip_frames); + } else { + *skip_frames = 1 * 8; + frame = dwc2_frame_num_inc(hsotg->frame_number, + *skip_frames); + } + + frame = dwc2_full_frame_num(frame); + } else { + /* + * Two frames are skipped for FS - the current and the next. + * But for descriptor programming, 1 frame (descriptor) is + * enough, see example above. + */ + *skip_frames = 1; + frame = dwc2_frame_num_inc(hsotg->frame_number, 2); + } + + return frame; +} + +/* + * Calculate initial descriptor index for isochronous transfer based on + * scheduled frame + */ +static u16 dwc2_recalc_initial_desc_idx(struct dwc2_hsotg *hsotg, + struct dwc2_qh *qh) +{ + u16 frame, fr_idx, fr_idx_tmp, skip_frames; + + /* + * With current ISOC processing algorithm the channel is being released + * when no more QTDs in the list (qh->ntd == 0). Thus this function is + * called only when qh->ntd == 0 and qh->channel == 0. + * + * So qh->channel != NULL branch is not used and just not removed from + * the source file. It is required for another possible approach which + * is, do not disable and release the channel when ISOC session + * completed, just move QH to inactive schedule until new QTD arrives. + * On new QTD, the QH moved back to 'ready' schedule, starting frame and + * therefore starting desc_index are recalculated. In this case channel + * is released only on ep_disable. + */ + + /* + * Calculate starting descriptor index. For INTERRUPT endpoint it is + * always 0. + */ + if (qh->channel) { + frame = dwc2_calc_starting_frame(hsotg, qh, &skip_frames); + /* + * Calculate initial descriptor index based on FrameList current + * bitmap and servicing period + */ + fr_idx_tmp = dwc2_frame_list_idx(frame); + fr_idx = (FRLISTEN_64_SIZE + + dwc2_frame_list_idx(qh->next_active_frame) - + fr_idx_tmp) % dwc2_frame_incr_val(qh); + fr_idx = (fr_idx + fr_idx_tmp) % FRLISTEN_64_SIZE; + } else { + qh->next_active_frame = dwc2_calc_starting_frame(hsotg, qh, + &skip_frames); + fr_idx = dwc2_frame_list_idx(qh->next_active_frame); + } + + qh->td_first = qh->td_last = dwc2_frame_to_desc_idx(qh, fr_idx); + + return skip_frames; +} + +#define ISOC_URB_GIVEBACK_ASAP + +#define MAX_ISOC_XFER_SIZE_FS 1023 +#define MAX_ISOC_XFER_SIZE_HS 3072 +#define DESCNUM_THRESHOLD 4 + +static void dwc2_fill_host_isoc_dma_desc(struct dwc2_hsotg *hsotg, + struct dwc2_qtd *qtd, + struct dwc2_qh *qh, u32 max_xfer_size, + u16 idx) +{ + struct dwc2_dma_desc *dma_desc = &qh->desc_list[idx]; + struct dwc2_hcd_iso_packet_desc *frame_desc; + + memset(dma_desc, 0, sizeof(*dma_desc)); + frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index_last]; + + if (frame_desc->length > max_xfer_size) + qh->n_bytes[idx] = max_xfer_size; + else + qh->n_bytes[idx] = frame_desc->length; + + dma_desc->buf = (u32)(qtd->urb->dma + frame_desc->offset); + dma_desc->status = qh->n_bytes[idx] << HOST_DMA_ISOC_NBYTES_SHIFT & + HOST_DMA_ISOC_NBYTES_MASK; + + /* Set active bit */ + dma_desc->status |= HOST_DMA_A; + + qh->ntd++; + qtd->isoc_frame_index_last++; + +#ifdef ISOC_URB_GIVEBACK_ASAP + /* Set IOC for each descriptor corresponding to last frame of URB */ + if (qtd->isoc_frame_index_last == qtd->urb->packet_count) + dma_desc->status |= HOST_DMA_IOC; +#endif + + dma_sync_single_for_device(hsotg->dev, + qh->desc_list_dma + + (idx * sizeof(struct dwc2_dma_desc)), + sizeof(struct dwc2_dma_desc), + DMA_TO_DEVICE); +} + +static void dwc2_init_isoc_dma_desc(struct dwc2_hsotg *hsotg, + struct dwc2_qh *qh, u16 skip_frames) +{ + struct dwc2_qtd *qtd; + u32 max_xfer_size; + u16 idx, inc, n_desc = 0, ntd_max = 0; + u16 cur_idx; + u16 next_idx; + + idx = qh->td_last; + inc = qh->host_interval; + hsotg->frame_number = dwc2_hcd_get_frame_number(hsotg); + cur_idx = dwc2_frame_list_idx(hsotg->frame_number); + next_idx = dwc2_desclist_idx_inc(qh->td_last, inc, qh->dev_speed); + + /* + * Ensure current frame number didn't overstep last scheduled + * descriptor. If it happens, the only way to recover is to move + * qh->td_last to current frame number + 1. + * So that next isoc descriptor will be scheduled on frame number + 1 + * and not on a past frame. + */ + if (dwc2_frame_idx_num_gt(cur_idx, next_idx) || (cur_idx == next_idx)) { + if (inc < 32) { + dev_vdbg(hsotg->dev, + "current frame number overstep last descriptor\n"); + qh->td_last = dwc2_desclist_idx_inc(cur_idx, inc, + qh->dev_speed); + idx = qh->td_last; + } + } + + if (qh->host_interval) { + ntd_max = (dwc2_max_desc_num(qh) + qh->host_interval - 1) / + qh->host_interval; + if (skip_frames && !qh->channel) + ntd_max -= skip_frames / qh->host_interval; + } + + max_xfer_size = qh->dev_speed == USB_SPEED_HIGH ? + MAX_ISOC_XFER_SIZE_HS : MAX_ISOC_XFER_SIZE_FS; + + list_for_each_entry(qtd, &qh->qtd_list, qtd_list_entry) { + if (qtd->in_process && + qtd->isoc_frame_index_last == + qtd->urb->packet_count) + continue; + + qtd->isoc_td_first = idx; + while (qh->ntd < ntd_max && qtd->isoc_frame_index_last < + qtd->urb->packet_count) { + dwc2_fill_host_isoc_dma_desc(hsotg, qtd, qh, + max_xfer_size, idx); + idx = dwc2_desclist_idx_inc(idx, inc, qh->dev_speed); + n_desc++; + } + qtd->isoc_td_last = idx; + qtd->in_process = 1; + } + + qh->td_last = idx; + +#ifdef ISOC_URB_GIVEBACK_ASAP + /* Set IOC for last descriptor if descriptor list is full */ + if (qh->ntd == ntd_max) { + idx = dwc2_desclist_idx_dec(qh->td_last, inc, qh->dev_speed); + qh->desc_list[idx].status |= HOST_DMA_IOC; + dma_sync_single_for_device(hsotg->dev, + qh->desc_list_dma + (idx * + sizeof(struct dwc2_dma_desc)), + sizeof(struct dwc2_dma_desc), + DMA_TO_DEVICE); + } +#else + /* + * Set IOC bit only for one descriptor. Always try to be ahead of HW + * processing, i.e. on IOC generation driver activates next descriptor + * but core continues to process descriptors following the one with IOC + * set. + */ + + if (n_desc > DESCNUM_THRESHOLD) + /* + * Move IOC "up". Required even if there is only one QTD + * in the list, because QTDs might continue to be queued, + * but during the activation it was only one queued. + * Actually more than one QTD might be in the list if this + * function called from XferCompletion - QTDs was queued during + * HW processing of the previous descriptor chunk. + */ + idx = dwc2_desclist_idx_dec(idx, inc * ((qh->ntd + 1) / 2), + qh->dev_speed); + else + /* + * Set the IOC for the latest descriptor if either number of + * descriptors is not greater than threshold or no more new + * descriptors activated + */ + idx = dwc2_desclist_idx_dec(qh->td_last, inc, qh->dev_speed); + + qh->desc_list[idx].status |= HOST_DMA_IOC; + dma_sync_single_for_device(hsotg->dev, + qh->desc_list_dma + + (idx * sizeof(struct dwc2_dma_desc)), + sizeof(struct dwc2_dma_desc), + DMA_TO_DEVICE); +#endif +} + +static void dwc2_fill_host_dma_desc(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, + struct dwc2_qtd *qtd, struct dwc2_qh *qh, + int n_desc) +{ + struct dwc2_dma_desc *dma_desc = &qh->desc_list[n_desc]; + int len = chan->xfer_len; + + if (len > HOST_DMA_NBYTES_LIMIT - (chan->max_packet - 1)) + len = HOST_DMA_NBYTES_LIMIT - (chan->max_packet - 1); + + if (chan->ep_is_in) { + int num_packets; + + if (len > 0 && chan->max_packet) + num_packets = (len + chan->max_packet - 1) + / chan->max_packet; + else + /* Need 1 packet for transfer length of 0 */ + num_packets = 1; + + /* Always program an integral # of packets for IN transfers */ + len = num_packets * chan->max_packet; + } + + dma_desc->status = len << HOST_DMA_NBYTES_SHIFT & HOST_DMA_NBYTES_MASK; + qh->n_bytes[n_desc] = len; + + if (qh->ep_type == USB_ENDPOINT_XFER_CONTROL && + qtd->control_phase == DWC2_CONTROL_SETUP) + dma_desc->status |= HOST_DMA_SUP; + + dma_desc->buf = (u32)chan->xfer_dma; + + dma_sync_single_for_device(hsotg->dev, + qh->desc_list_dma + + (n_desc * sizeof(struct dwc2_dma_desc)), + sizeof(struct dwc2_dma_desc), + DMA_TO_DEVICE); + + /* + * Last (or only) descriptor of IN transfer with actual size less + * than MaxPacket + */ + if (len > chan->xfer_len) { + chan->xfer_len = 0; + } else { + chan->xfer_dma += len; + chan->xfer_len -= len; + } +} + +static void dwc2_init_non_isoc_dma_desc(struct dwc2_hsotg *hsotg, + struct dwc2_qh *qh) +{ + struct dwc2_qtd *qtd; + struct dwc2_host_chan *chan = qh->channel; + int n_desc = 0; + + dev_vdbg(hsotg->dev, "%s(): qh=%p dma=%08lx len=%d\n", __func__, qh, + (unsigned long)chan->xfer_dma, chan->xfer_len); + + /* + * Start with chan->xfer_dma initialized in assign_and_init_hc(), then + * if SG transfer consists of multiple URBs, this pointer is re-assigned + * to the buffer of the currently processed QTD. For non-SG request + * there is always one QTD active. + */ + + list_for_each_entry(qtd, &qh->qtd_list, qtd_list_entry) { + dev_vdbg(hsotg->dev, "qtd=%p\n", qtd); + + if (n_desc) { + /* SG request - more than 1 QTD */ + chan->xfer_dma = qtd->urb->dma + + qtd->urb->actual_length; + chan->xfer_len = qtd->urb->length - + qtd->urb->actual_length; + dev_vdbg(hsotg->dev, "buf=%08lx len=%d\n", + (unsigned long)chan->xfer_dma, chan->xfer_len); + } + + qtd->n_desc = 0; + do { + if (n_desc > 1) { + qh->desc_list[n_desc - 1].status |= HOST_DMA_A; + dev_vdbg(hsotg->dev, + "set A bit in desc %d (%p)\n", + n_desc - 1, + &qh->desc_list[n_desc - 1]); + dma_sync_single_for_device(hsotg->dev, + qh->desc_list_dma + + ((n_desc - 1) * + sizeof(struct dwc2_dma_desc)), + sizeof(struct dwc2_dma_desc), + DMA_TO_DEVICE); + } + dwc2_fill_host_dma_desc(hsotg, chan, qtd, qh, n_desc); + dev_vdbg(hsotg->dev, + "desc %d (%p) buf=%08x status=%08x\n", + n_desc, &qh->desc_list[n_desc], + qh->desc_list[n_desc].buf, + qh->desc_list[n_desc].status); + qtd->n_desc++; + n_desc++; + } while (chan->xfer_len > 0 && + n_desc != MAX_DMA_DESC_NUM_GENERIC); + + dev_vdbg(hsotg->dev, "n_desc=%d\n", n_desc); + qtd->in_process = 1; + if (qh->ep_type == USB_ENDPOINT_XFER_CONTROL) + break; + if (n_desc == MAX_DMA_DESC_NUM_GENERIC) + break; + } + + if (n_desc) { + qh->desc_list[n_desc - 1].status |= + HOST_DMA_IOC | HOST_DMA_EOL | HOST_DMA_A; + dev_vdbg(hsotg->dev, "set IOC/EOL/A bits in desc %d (%p)\n", + n_desc - 1, &qh->desc_list[n_desc - 1]); + dma_sync_single_for_device(hsotg->dev, + qh->desc_list_dma + (n_desc - 1) * + sizeof(struct dwc2_dma_desc), + sizeof(struct dwc2_dma_desc), + DMA_TO_DEVICE); + if (n_desc > 1) { + qh->desc_list[0].status |= HOST_DMA_A; + dev_vdbg(hsotg->dev, "set A bit in desc 0 (%p)\n", + &qh->desc_list[0]); + dma_sync_single_for_device(hsotg->dev, + qh->desc_list_dma, + sizeof(struct dwc2_dma_desc), + DMA_TO_DEVICE); + } + chan->ntd = n_desc; + } +} + +/** + * dwc2_hcd_start_xfer_ddma() - Starts a transfer in Descriptor DMA mode + * + * @hsotg: The HCD state structure for the DWC OTG controller + * @qh: The QH to init + * + * Return: 0 if successful, negative error code otherwise + * + * For Control and Bulk endpoints, initializes descriptor list and starts the + * transfer. For Interrupt and Isochronous endpoints, initializes descriptor + * list then updates FrameList, marking appropriate entries as active. + * + * For Isochronous endpoints the starting descriptor index is calculated based + * on the scheduled frame, but only on the first transfer descriptor within a + * session. Then the transfer is started via enabling the channel. + * + * For Isochronous endpoints the channel is not halted on XferComplete + * interrupt so remains assigned to the endpoint(QH) until session is done. + */ +void dwc2_hcd_start_xfer_ddma(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) +{ + /* Channel is already assigned */ + struct dwc2_host_chan *chan = qh->channel; + u16 skip_frames = 0; + + switch (chan->ep_type) { + case USB_ENDPOINT_XFER_CONTROL: + case USB_ENDPOINT_XFER_BULK: + dwc2_init_non_isoc_dma_desc(hsotg, qh); + dwc2_hc_start_transfer_ddma(hsotg, chan); + break; + case USB_ENDPOINT_XFER_INT: + dwc2_init_non_isoc_dma_desc(hsotg, qh); + dwc2_update_frame_list(hsotg, qh, 1); + dwc2_hc_start_transfer_ddma(hsotg, chan); + break; + case USB_ENDPOINT_XFER_ISOC: + if (!qh->ntd) + skip_frames = dwc2_recalc_initial_desc_idx(hsotg, qh); + dwc2_init_isoc_dma_desc(hsotg, qh, skip_frames); + + if (!chan->xfer_started) { + dwc2_update_frame_list(hsotg, qh, 1); + + /* + * Always set to max, instead of actual size. Otherwise + * ntd will be changed with channel being enabled. Not + * recommended. + */ + chan->ntd = dwc2_max_desc_num(qh); + + /* Enable channel only once for ISOC */ + dwc2_hc_start_transfer_ddma(hsotg, chan); + } + + break; + default: + break; + } +} + +#define DWC2_CMPL_DONE 1 +#define DWC2_CMPL_STOP 2 + +static int dwc2_cmpl_host_isoc_dma_desc(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, + struct dwc2_qtd *qtd, + struct dwc2_qh *qh, u16 idx) +{ + struct dwc2_dma_desc *dma_desc; + struct dwc2_hcd_iso_packet_desc *frame_desc; + u16 remain = 0; + int rc = 0; + + if (!qtd->urb) + return -EINVAL; + + dma_sync_single_for_cpu(hsotg->dev, qh->desc_list_dma + (idx * + sizeof(struct dwc2_dma_desc)), + sizeof(struct dwc2_dma_desc), + DMA_FROM_DEVICE); + + dma_desc = &qh->desc_list[idx]; + + frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index_last]; + dma_desc->buf = (u32)(qtd->urb->dma + frame_desc->offset); + if (chan->ep_is_in) + remain = (dma_desc->status & HOST_DMA_ISOC_NBYTES_MASK) >> + HOST_DMA_ISOC_NBYTES_SHIFT; + + if ((dma_desc->status & HOST_DMA_STS_MASK) == HOST_DMA_STS_PKTERR) { + /* + * XactError, or unable to complete all the transactions + * in the scheduled micro-frame/frame, both indicated by + * HOST_DMA_STS_PKTERR + */ + qtd->urb->error_count++; + frame_desc->actual_length = qh->n_bytes[idx] - remain; + frame_desc->status = -EPROTO; + } else { + /* Success */ + frame_desc->actual_length = qh->n_bytes[idx] - remain; + frame_desc->status = 0; + } + + if (++qtd->isoc_frame_index == qtd->urb->packet_count) { + /* + * urb->status is not used for isoc transfers here. The + * individual frame_desc status are used instead. + */ + dwc2_host_complete(hsotg, qtd, 0); + dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); + + /* + * This check is necessary because urb_dequeue can be called + * from urb complete callback (sound driver for example). All + * pending URBs are dequeued there, so no need for further + * processing. + */ + if (chan->halt_status == DWC2_HC_XFER_URB_DEQUEUE) + return -1; + rc = DWC2_CMPL_DONE; + } + + qh->ntd--; + + /* Stop if IOC requested descriptor reached */ + if (dma_desc->status & HOST_DMA_IOC) + rc = DWC2_CMPL_STOP; + + return rc; +} + +static void dwc2_complete_isoc_xfer_ddma(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, + enum dwc2_halt_status halt_status) +{ + struct dwc2_hcd_iso_packet_desc *frame_desc; + struct dwc2_qtd *qtd, *qtd_tmp; + struct dwc2_qh *qh; + u16 idx; + int rc; + + qh = chan->qh; + idx = qh->td_first; + + if (chan->halt_status == DWC2_HC_XFER_URB_DEQUEUE) { + list_for_each_entry(qtd, &qh->qtd_list, qtd_list_entry) + qtd->in_process = 0; + return; + } + + if (halt_status == DWC2_HC_XFER_AHB_ERR || + halt_status == DWC2_HC_XFER_BABBLE_ERR) { + /* + * Channel is halted in these error cases, considered as serious + * issues. + * Complete all URBs marking all frames as failed, irrespective + * whether some of the descriptors (frames) succeeded or not. + * Pass error code to completion routine as well, to update + * urb->status, some of class drivers might use it to stop + * queing transfer requests. + */ + int err = halt_status == DWC2_HC_XFER_AHB_ERR ? + -EIO : -EOVERFLOW; + + list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, + qtd_list_entry) { + if (qtd->urb) { + for (idx = 0; idx < qtd->urb->packet_count; + idx++) { + frame_desc = &qtd->urb->iso_descs[idx]; + frame_desc->status = err; + } + + dwc2_host_complete(hsotg, qtd, err); + } + + dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); + } + + return; + } + + list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry) { + if (!qtd->in_process) + break; + + /* + * Ensure idx corresponds to descriptor where first urb of this + * qtd was added. In fact, during isoc desc init, dwc2 may skip + * an index if current frame number is already over this index. + */ + if (idx != qtd->isoc_td_first) { + dev_vdbg(hsotg->dev, + "try to complete %d instead of %d\n", + idx, qtd->isoc_td_first); + idx = qtd->isoc_td_first; + } + + do { + struct dwc2_qtd *qtd_next; + u16 cur_idx; + + rc = dwc2_cmpl_host_isoc_dma_desc(hsotg, chan, qtd, qh, + idx); + if (rc < 0) + return; + idx = dwc2_desclist_idx_inc(idx, qh->host_interval, + chan->speed); + if (!rc) + continue; + + if (rc == DWC2_CMPL_DONE) + break; + + /* rc == DWC2_CMPL_STOP */ + + if (qh->host_interval >= 32) + goto stop_scan; + + qh->td_first = idx; + cur_idx = dwc2_frame_list_idx(hsotg->frame_number); + qtd_next = list_first_entry(&qh->qtd_list, + struct dwc2_qtd, + qtd_list_entry); + if (dwc2_frame_idx_num_gt(cur_idx, + qtd_next->isoc_td_last)) + break; + + goto stop_scan; + + } while (idx != qh->td_first); + } + +stop_scan: + qh->td_first = idx; +} + +static int dwc2_update_non_isoc_urb_state_ddma(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, + struct dwc2_qtd *qtd, + struct dwc2_dma_desc *dma_desc, + enum dwc2_halt_status halt_status, + u32 n_bytes, int *xfer_done) +{ + struct dwc2_hcd_urb *urb = qtd->urb; + u16 remain = 0; + + if (chan->ep_is_in) + remain = (dma_desc->status & HOST_DMA_NBYTES_MASK) >> + HOST_DMA_NBYTES_SHIFT; + + dev_vdbg(hsotg->dev, "remain=%d dwc2_urb=%p\n", remain, urb); + + if (halt_status == DWC2_HC_XFER_AHB_ERR) { + dev_err(hsotg->dev, "EIO\n"); + urb->status = -EIO; + return 1; + } + + if ((dma_desc->status & HOST_DMA_STS_MASK) == HOST_DMA_STS_PKTERR) { + switch (halt_status) { + case DWC2_HC_XFER_STALL: + dev_vdbg(hsotg->dev, "Stall\n"); + urb->status = -EPIPE; + break; + case DWC2_HC_XFER_BABBLE_ERR: + dev_err(hsotg->dev, "Babble\n"); + urb->status = -EOVERFLOW; + break; + case DWC2_HC_XFER_XACT_ERR: + dev_err(hsotg->dev, "XactErr\n"); + urb->status = -EPROTO; + break; + default: + dev_err(hsotg->dev, + "%s: Unhandled descriptor error status (%d)\n", + __func__, halt_status); + break; + } + return 1; + } + + if (dma_desc->status & HOST_DMA_A) { + dev_vdbg(hsotg->dev, + "Active descriptor encountered on channel %d\n", + chan->hc_num); + return 0; + } + + if (chan->ep_type == USB_ENDPOINT_XFER_CONTROL) { + if (qtd->control_phase == DWC2_CONTROL_DATA) { + urb->actual_length += n_bytes - remain; + if (remain || urb->actual_length >= urb->length) { + /* + * For Control Data stage do not set urb->status + * to 0, to prevent URB callback. Set it when + * Status phase is done. See below. + */ + *xfer_done = 1; + } + } else if (qtd->control_phase == DWC2_CONTROL_STATUS) { + urb->status = 0; + *xfer_done = 1; + } + /* No handling for SETUP stage */ + } else { + /* BULK and INTR */ + urb->actual_length += n_bytes - remain; + dev_vdbg(hsotg->dev, "length=%d actual=%d\n", urb->length, + urb->actual_length); + if (remain || urb->actual_length >= urb->length) { + urb->status = 0; + *xfer_done = 1; + } + } + + return 0; +} + +static int dwc2_process_non_isoc_desc(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, + int chnum, struct dwc2_qtd *qtd, + int desc_num, + enum dwc2_halt_status halt_status, + int *xfer_done) +{ + struct dwc2_qh *qh = chan->qh; + struct dwc2_hcd_urb *urb = qtd->urb; + struct dwc2_dma_desc *dma_desc; + u32 n_bytes; + int failed; + + dev_vdbg(hsotg->dev, "%s()\n", __func__); + + if (!urb) + return -EINVAL; + + dma_sync_single_for_cpu(hsotg->dev, + qh->desc_list_dma + (desc_num * + sizeof(struct dwc2_dma_desc)), + sizeof(struct dwc2_dma_desc), + DMA_FROM_DEVICE); + + dma_desc = &qh->desc_list[desc_num]; + n_bytes = qh->n_bytes[desc_num]; + dev_vdbg(hsotg->dev, + "qtd=%p dwc2_urb=%p desc_num=%d desc=%p n_bytes=%d\n", + qtd, urb, desc_num, dma_desc, n_bytes); + failed = dwc2_update_non_isoc_urb_state_ddma(hsotg, chan, qtd, dma_desc, + halt_status, n_bytes, + xfer_done); + if (failed || (*xfer_done && urb->status != -EINPROGRESS)) { + dwc2_host_complete(hsotg, qtd, urb->status); + dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); + dev_vdbg(hsotg->dev, "failed=%1x xfer_done=%1x\n", + failed, *xfer_done); + return failed; + } + + if (qh->ep_type == USB_ENDPOINT_XFER_CONTROL) { + switch (qtd->control_phase) { + case DWC2_CONTROL_SETUP: + if (urb->length > 0) + qtd->control_phase = DWC2_CONTROL_DATA; + else + qtd->control_phase = DWC2_CONTROL_STATUS; + dev_vdbg(hsotg->dev, + " Control setup transaction done\n"); + break; + case DWC2_CONTROL_DATA: + if (*xfer_done) { + qtd->control_phase = DWC2_CONTROL_STATUS; + dev_vdbg(hsotg->dev, + " Control data transfer done\n"); + } else if (desc_num + 1 == qtd->n_desc) { + /* + * Last descriptor for Control data stage which + * is not completed yet + */ + dwc2_hcd_save_data_toggle(hsotg, chan, chnum, + qtd); + } + break; + default: + break; + } + } + + return 0; +} + +static void dwc2_complete_non_isoc_xfer_ddma(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, + int chnum, + enum dwc2_halt_status halt_status) +{ + struct list_head *qtd_item, *qtd_tmp; + struct dwc2_qh *qh = chan->qh; + struct dwc2_qtd *qtd = NULL; + int xfer_done; + int desc_num = 0; + + if (chan->halt_status == DWC2_HC_XFER_URB_DEQUEUE) { + list_for_each_entry(qtd, &qh->qtd_list, qtd_list_entry) + qtd->in_process = 0; + return; + } + + list_for_each_safe(qtd_item, qtd_tmp, &qh->qtd_list) { + int i; + int qtd_desc_count; + + qtd = list_entry(qtd_item, struct dwc2_qtd, qtd_list_entry); + xfer_done = 0; + qtd_desc_count = qtd->n_desc; + + for (i = 0; i < qtd_desc_count; i++) { + if (dwc2_process_non_isoc_desc(hsotg, chan, chnum, qtd, + desc_num, halt_status, + &xfer_done)) { + qtd = NULL; + goto stop_scan; + } + + desc_num++; + } + } + +stop_scan: + if (qh->ep_type != USB_ENDPOINT_XFER_CONTROL) { + /* + * Resetting the data toggle for bulk and interrupt endpoints + * in case of stall. See handle_hc_stall_intr(). + */ + if (halt_status == DWC2_HC_XFER_STALL) + qh->data_toggle = DWC2_HC_PID_DATA0; + else + dwc2_hcd_save_data_toggle(hsotg, chan, chnum, NULL); + } + + if (halt_status == DWC2_HC_XFER_COMPLETE) { + if (chan->hcint & HCINTMSK_NYET) { + /* + * Got a NYET on the last transaction of the transfer. + * It means that the endpoint should be in the PING + * state at the beginning of the next transfer. + */ + qh->ping_state = 1; + } + } +} + +/** + * dwc2_hcd_complete_xfer_ddma() - Scans the descriptor list, updates URB's + * status and calls completion routine for the URB if it's done. Called from + * interrupt handlers. + * + * @hsotg: The HCD state structure for the DWC OTG controller + * @chan: Host channel the transfer is completed on + * @chnum: Index of Host channel registers + * @halt_status: Reason the channel is being halted or just XferComplete + * for isochronous transfers + * + * Releases the channel to be used by other transfers. + * In case of Isochronous endpoint the channel is not halted until the end of + * the session, i.e. QTD list is empty. + * If periodic channel released the FrameList is updated accordingly. + * Calls transaction selection routines to activate pending transfers. + */ +void dwc2_hcd_complete_xfer_ddma(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + enum dwc2_halt_status halt_status) +{ + struct dwc2_qh *qh = chan->qh; + int continue_isoc_xfer = 0; + enum dwc2_transaction_type tr_type; + + if (chan->ep_type == USB_ENDPOINT_XFER_ISOC) { + dwc2_complete_isoc_xfer_ddma(hsotg, chan, halt_status); + + /* Release the channel if halted or session completed */ + if (halt_status != DWC2_HC_XFER_COMPLETE || + list_empty(&qh->qtd_list)) { + struct dwc2_qtd *qtd, *qtd_tmp; + + /* + * Kill all remainings QTDs since channel has been + * halted. + */ + list_for_each_entry_safe(qtd, qtd_tmp, + &qh->qtd_list, + qtd_list_entry) { + dwc2_host_complete(hsotg, qtd, + -ECONNRESET); + dwc2_hcd_qtd_unlink_and_free(hsotg, + qtd, qh); + } + + /* Halt the channel if session completed */ + if (halt_status == DWC2_HC_XFER_COMPLETE) + dwc2_hc_halt(hsotg, chan, halt_status); + dwc2_release_channel_ddma(hsotg, qh); + dwc2_hcd_qh_unlink(hsotg, qh); + } else { + /* Keep in assigned schedule to continue transfer */ + list_move_tail(&qh->qh_list_entry, + &hsotg->periodic_sched_assigned); + /* + * If channel has been halted during giveback of urb + * then prevent any new scheduling. + */ + if (!chan->halt_status) + continue_isoc_xfer = 1; + } + /* + * Todo: Consider the case when period exceeds FrameList size. + * Frame Rollover interrupt should be used. + */ + } else { + /* + * Scan descriptor list to complete the URB(s), then release + * the channel + */ + dwc2_complete_non_isoc_xfer_ddma(hsotg, chan, chnum, + halt_status); + dwc2_release_channel_ddma(hsotg, qh); + dwc2_hcd_qh_unlink(hsotg, qh); + + if (!list_empty(&qh->qtd_list)) { + /* + * Add back to inactive non-periodic schedule on normal + * completion + */ + dwc2_hcd_qh_add(hsotg, qh); + } + } + + tr_type = dwc2_hcd_select_transactions(hsotg); + if (tr_type != DWC2_TRANSACTION_NONE || continue_isoc_xfer) { + if (continue_isoc_xfer) { + if (tr_type == DWC2_TRANSACTION_NONE) + tr_type = DWC2_TRANSACTION_PERIODIC; + else if (tr_type == DWC2_TRANSACTION_NON_PERIODIC) + tr_type = DWC2_TRANSACTION_ALL; + } + dwc2_hcd_queue_transactions(hsotg, tr_type); + } +} diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c new file mode 100644 index 0000000000..5c7538d498 --- /dev/null +++ b/drivers/usb/dwc2/hcd_intr.c @@ -0,0 +1,2266 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * hcd_intr.c - DesignWare HS OTG Controller host-mode interrupt handling + * + * Copyright (C) 2004-2013 Synopsys, Inc. + */ + +/* + * This file contains the interrupt handlers for Host mode + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/usb.h> + +#include <linux/usb/hcd.h> +#include <linux/usb/ch11.h> + +#include "core.h" +#include "hcd.h" + +/* + * If we get this many NAKs on a split transaction we'll slow down + * retransmission. A 1 here means delay after the first NAK. + */ +#define DWC2_NAKS_BEFORE_DELAY 3 + +/* This function is for debug only */ +static void dwc2_track_missed_sofs(struct dwc2_hsotg *hsotg) +{ + u16 curr_frame_number = hsotg->frame_number; + u16 expected = dwc2_frame_num_inc(hsotg->last_frame_num, 1); + + if (expected != curr_frame_number) + dwc2_sch_vdbg(hsotg, "MISSED SOF %04x != %04x\n", + expected, curr_frame_number); + +#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS + if (hsotg->frame_num_idx < FRAME_NUM_ARRAY_SIZE) { + if (expected != curr_frame_number) { + hsotg->frame_num_array[hsotg->frame_num_idx] = + curr_frame_number; + hsotg->last_frame_num_array[hsotg->frame_num_idx] = + hsotg->last_frame_num; + hsotg->frame_num_idx++; + } + } else if (!hsotg->dumped_frame_num_array) { + int i; + + dev_info(hsotg->dev, "Frame Last Frame\n"); + dev_info(hsotg->dev, "----- ----------\n"); + for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) { + dev_info(hsotg->dev, "0x%04x 0x%04x\n", + hsotg->frame_num_array[i], + hsotg->last_frame_num_array[i]); + } + hsotg->dumped_frame_num_array = 1; + } +#endif + hsotg->last_frame_num = curr_frame_number; +} + +static void dwc2_hc_handle_tt_clear(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, + struct dwc2_qtd *qtd) +{ + struct usb_device *root_hub = dwc2_hsotg_to_hcd(hsotg)->self.root_hub; + struct urb *usb_urb; + + if (!chan->qh) + return; + + if (chan->qh->dev_speed == USB_SPEED_HIGH) + return; + + if (!qtd->urb) + return; + + usb_urb = qtd->urb->priv; + if (!usb_urb || !usb_urb->dev || !usb_urb->dev->tt) + return; + + /* + * The root hub doesn't really have a TT, but Linux thinks it + * does because how could you have a "high speed hub" that + * directly talks directly to low speed devices without a TT? + * It's all lies. Lies, I tell you. + */ + if (usb_urb->dev->tt->hub == root_hub) + return; + + if (qtd->urb->status != -EPIPE && qtd->urb->status != -EREMOTEIO) { + chan->qh->tt_buffer_dirty = 1; + if (usb_hub_clear_tt_buffer(usb_urb)) + /* Clear failed; let's hope things work anyway */ + chan->qh->tt_buffer_dirty = 0; + } +} + +/* + * Handles the start-of-frame interrupt in host mode. Non-periodic + * transactions may be queued to the DWC_otg controller for the current + * (micro)frame. Periodic transactions may be queued to the controller + * for the next (micro)frame. + */ +static void dwc2_sof_intr(struct dwc2_hsotg *hsotg) +{ + struct list_head *qh_entry; + struct dwc2_qh *qh; + enum dwc2_transaction_type tr_type; + + /* Clear interrupt */ + dwc2_writel(hsotg, GINTSTS_SOF, GINTSTS); + +#ifdef DEBUG_SOF + dev_vdbg(hsotg->dev, "--Start of Frame Interrupt--\n"); +#endif + + hsotg->frame_number = dwc2_hcd_get_frame_number(hsotg); + + dwc2_track_missed_sofs(hsotg); + + /* Determine whether any periodic QHs should be executed */ + qh_entry = hsotg->periodic_sched_inactive.next; + while (qh_entry != &hsotg->periodic_sched_inactive) { + qh = list_entry(qh_entry, struct dwc2_qh, qh_list_entry); + qh_entry = qh_entry->next; + if (dwc2_frame_num_le(qh->next_active_frame, + hsotg->frame_number)) { + dwc2_sch_vdbg(hsotg, "QH=%p ready fn=%04x, nxt=%04x\n", + qh, hsotg->frame_number, + qh->next_active_frame); + + /* + * Move QH to the ready list to be executed next + * (micro)frame + */ + list_move_tail(&qh->qh_list_entry, + &hsotg->periodic_sched_ready); + } + } + tr_type = dwc2_hcd_select_transactions(hsotg); + if (tr_type != DWC2_TRANSACTION_NONE) + dwc2_hcd_queue_transactions(hsotg, tr_type); +} + +/* + * Handles the Rx FIFO Level Interrupt, which indicates that there is + * at least one packet in the Rx FIFO. The packets are moved from the FIFO to + * memory if the DWC_otg controller is operating in Slave mode. + */ +static void dwc2_rx_fifo_level_intr(struct dwc2_hsotg *hsotg) +{ + u32 grxsts, chnum, bcnt, dpid, pktsts; + struct dwc2_host_chan *chan; + + if (dbg_perio()) + dev_vdbg(hsotg->dev, "--RxFIFO Level Interrupt--\n"); + + grxsts = dwc2_readl(hsotg, GRXSTSP); + chnum = (grxsts & GRXSTS_HCHNUM_MASK) >> GRXSTS_HCHNUM_SHIFT; + chan = hsotg->hc_ptr_array[chnum]; + if (!chan) { + dev_err(hsotg->dev, "Unable to get corresponding channel\n"); + return; + } + + bcnt = (grxsts & GRXSTS_BYTECNT_MASK) >> GRXSTS_BYTECNT_SHIFT; + dpid = (grxsts & GRXSTS_DPID_MASK) >> GRXSTS_DPID_SHIFT; + pktsts = (grxsts & GRXSTS_PKTSTS_MASK) >> GRXSTS_PKTSTS_SHIFT; + + /* Packet Status */ + if (dbg_perio()) { + dev_vdbg(hsotg->dev, " Ch num = %d\n", chnum); + dev_vdbg(hsotg->dev, " Count = %d\n", bcnt); + dev_vdbg(hsotg->dev, " DPID = %d, chan.dpid = %d\n", dpid, + chan->data_pid_start); + dev_vdbg(hsotg->dev, " PStatus = %d\n", pktsts); + } + + switch (pktsts) { + case GRXSTS_PKTSTS_HCHIN: + /* Read the data into the host buffer */ + if (bcnt > 0) { + dwc2_read_packet(hsotg, chan->xfer_buf, bcnt); + + /* Update the HC fields for the next packet received */ + chan->xfer_count += bcnt; + chan->xfer_buf += bcnt; + } + break; + case GRXSTS_PKTSTS_HCHIN_XFER_COMP: + case GRXSTS_PKTSTS_DATATOGGLEERR: + case GRXSTS_PKTSTS_HCHHALTED: + /* Handled in interrupt, just ignore data */ + break; + default: + dev_err(hsotg->dev, + "RxFIFO Level Interrupt: Unknown status %d\n", pktsts); + break; + } +} + +/* + * This interrupt occurs when the non-periodic Tx FIFO is half-empty. More + * data packets may be written to the FIFO for OUT transfers. More requests + * may be written to the non-periodic request queue for IN transfers. This + * interrupt is enabled only in Slave mode. + */ +static void dwc2_np_tx_fifo_empty_intr(struct dwc2_hsotg *hsotg) +{ + dev_vdbg(hsotg->dev, "--Non-Periodic TxFIFO Empty Interrupt--\n"); + dwc2_hcd_queue_transactions(hsotg, DWC2_TRANSACTION_NON_PERIODIC); +} + +/* + * This interrupt occurs when the periodic Tx FIFO is half-empty. More data + * packets may be written to the FIFO for OUT transfers. More requests may be + * written to the periodic request queue for IN transfers. This interrupt is + * enabled only in Slave mode. + */ +static void dwc2_perio_tx_fifo_empty_intr(struct dwc2_hsotg *hsotg) +{ + if (dbg_perio()) + dev_vdbg(hsotg->dev, "--Periodic TxFIFO Empty Interrupt--\n"); + dwc2_hcd_queue_transactions(hsotg, DWC2_TRANSACTION_PERIODIC); +} + +static void dwc2_hprt0_enable(struct dwc2_hsotg *hsotg, u32 hprt0, + u32 *hprt0_modify) +{ + struct dwc2_core_params *params = &hsotg->params; + int do_reset = 0; + u32 usbcfg; + u32 prtspd; + u32 hcfg; + u32 fslspclksel; + u32 hfir; + + dev_vdbg(hsotg->dev, "%s(%p)\n", __func__, hsotg); + + /* Every time when port enables calculate HFIR.FrInterval */ + hfir = dwc2_readl(hsotg, HFIR); + hfir &= ~HFIR_FRINT_MASK; + hfir |= dwc2_calc_frame_interval(hsotg) << HFIR_FRINT_SHIFT & + HFIR_FRINT_MASK; + dwc2_writel(hsotg, hfir, HFIR); + + /* Check if we need to adjust the PHY clock speed for low power */ + if (!params->host_support_fs_ls_low_power) { + /* Port has been enabled, set the reset change flag */ + hsotg->flags.b.port_reset_change = 1; + return; + } + + usbcfg = dwc2_readl(hsotg, GUSBCFG); + prtspd = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT; + + if (prtspd == HPRT0_SPD_LOW_SPEED || prtspd == HPRT0_SPD_FULL_SPEED) { + /* Low power */ + if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL)) { + /* Set PHY low power clock select for FS/LS devices */ + usbcfg |= GUSBCFG_PHY_LP_CLK_SEL; + dwc2_writel(hsotg, usbcfg, GUSBCFG); + do_reset = 1; + } + + hcfg = dwc2_readl(hsotg, HCFG); + fslspclksel = (hcfg & HCFG_FSLSPCLKSEL_MASK) >> + HCFG_FSLSPCLKSEL_SHIFT; + + if (prtspd == HPRT0_SPD_LOW_SPEED && + params->host_ls_low_power_phy_clk) { + /* 6 MHZ */ + dev_vdbg(hsotg->dev, + "FS_PHY programming HCFG to 6 MHz\n"); + if (fslspclksel != HCFG_FSLSPCLKSEL_6_MHZ) { + fslspclksel = HCFG_FSLSPCLKSEL_6_MHZ; + hcfg &= ~HCFG_FSLSPCLKSEL_MASK; + hcfg |= fslspclksel << HCFG_FSLSPCLKSEL_SHIFT; + dwc2_writel(hsotg, hcfg, HCFG); + do_reset = 1; + } + } else { + /* 48 MHZ */ + dev_vdbg(hsotg->dev, + "FS_PHY programming HCFG to 48 MHz\n"); + if (fslspclksel != HCFG_FSLSPCLKSEL_48_MHZ) { + fslspclksel = HCFG_FSLSPCLKSEL_48_MHZ; + hcfg &= ~HCFG_FSLSPCLKSEL_MASK; + hcfg |= fslspclksel << HCFG_FSLSPCLKSEL_SHIFT; + dwc2_writel(hsotg, hcfg, HCFG); + do_reset = 1; + } + } + } else { + /* Not low power */ + if (usbcfg & GUSBCFG_PHY_LP_CLK_SEL) { + usbcfg &= ~GUSBCFG_PHY_LP_CLK_SEL; + dwc2_writel(hsotg, usbcfg, GUSBCFG); + do_reset = 1; + } + } + + if (do_reset) { + *hprt0_modify |= HPRT0_RST; + dwc2_writel(hsotg, *hprt0_modify, HPRT0); + queue_delayed_work(hsotg->wq_otg, &hsotg->reset_work, + msecs_to_jiffies(60)); + } else { + /* Port has been enabled, set the reset change flag */ + hsotg->flags.b.port_reset_change = 1; + } +} + +/* + * There are multiple conditions that can cause a port interrupt. This function + * determines which interrupt conditions have occurred and handles them + * appropriately. + */ +static void dwc2_port_intr(struct dwc2_hsotg *hsotg) +{ + u32 hprt0; + u32 hprt0_modify; + + dev_vdbg(hsotg->dev, "--Port Interrupt--\n"); + + hprt0 = dwc2_readl(hsotg, HPRT0); + hprt0_modify = hprt0; + + /* + * Clear appropriate bits in HPRT0 to clear the interrupt bit in + * GINTSTS + */ + hprt0_modify &= ~(HPRT0_ENA | HPRT0_CONNDET | HPRT0_ENACHG | + HPRT0_OVRCURRCHG); + + /* + * Port Connect Detected + * Set flag and clear if detected + */ + if (hprt0 & HPRT0_CONNDET) { + dwc2_writel(hsotg, hprt0_modify | HPRT0_CONNDET, HPRT0); + + dev_vdbg(hsotg->dev, + "--Port Interrupt HPRT0=0x%08x Port Connect Detected--\n", + hprt0); + dwc2_hcd_connect(hsotg); + + /* + * The Hub driver asserts a reset when it sees port connect + * status change flag + */ + } + + /* + * Port Enable Changed + * Clear if detected - Set internal flag if disabled + */ + if (hprt0 & HPRT0_ENACHG) { + dwc2_writel(hsotg, hprt0_modify | HPRT0_ENACHG, HPRT0); + dev_vdbg(hsotg->dev, + " --Port Interrupt HPRT0=0x%08x Port Enable Changed (now %d)--\n", + hprt0, !!(hprt0 & HPRT0_ENA)); + if (hprt0 & HPRT0_ENA) { + hsotg->new_connection = true; + dwc2_hprt0_enable(hsotg, hprt0, &hprt0_modify); + } else { + hsotg->flags.b.port_enable_change = 1; + if (hsotg->params.dma_desc_fs_enable) { + u32 hcfg; + + hsotg->params.dma_desc_enable = false; + hsotg->new_connection = false; + hcfg = dwc2_readl(hsotg, HCFG); + hcfg &= ~HCFG_DESCDMA; + dwc2_writel(hsotg, hcfg, HCFG); + } + } + } + + /* Overcurrent Change Interrupt */ + if (hprt0 & HPRT0_OVRCURRCHG) { + dwc2_writel(hsotg, hprt0_modify | HPRT0_OVRCURRCHG, + HPRT0); + dev_vdbg(hsotg->dev, + " --Port Interrupt HPRT0=0x%08x Port Overcurrent Changed--\n", + hprt0); + hsotg->flags.b.port_over_current_change = 1; + } +} + +/* + * Gets the actual length of a transfer after the transfer halts. halt_status + * holds the reason for the halt. + * + * For IN transfers where halt_status is DWC2_HC_XFER_COMPLETE, *short_read + * is set to 1 upon return if less than the requested number of bytes were + * transferred. short_read may also be NULL on entry, in which case it remains + * unchanged. + */ +static u32 dwc2_get_actual_xfer_length(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd, + enum dwc2_halt_status halt_status, + int *short_read) +{ + u32 hctsiz, count, length; + + hctsiz = dwc2_readl(hsotg, HCTSIZ(chnum)); + + if (halt_status == DWC2_HC_XFER_COMPLETE) { + if (chan->ep_is_in) { + count = (hctsiz & TSIZ_XFERSIZE_MASK) >> + TSIZ_XFERSIZE_SHIFT; + length = chan->xfer_len - count; + if (short_read) + *short_read = (count != 0); + } else if (chan->qh->do_split) { + length = qtd->ssplit_out_xfer_count; + } else { + length = chan->xfer_len; + } + } else { + /* + * Must use the hctsiz.pktcnt field to determine how much data + * has been transferred. This field reflects the number of + * packets that have been transferred via the USB. This is + * always an integral number of packets if the transfer was + * halted before its normal completion. (Can't use the + * hctsiz.xfersize field because that reflects the number of + * bytes transferred via the AHB, not the USB). + */ + count = (hctsiz & TSIZ_PKTCNT_MASK) >> TSIZ_PKTCNT_SHIFT; + length = (chan->start_pkt_count - count) * chan->max_packet; + } + + return length; +} + +/** + * dwc2_update_urb_state() - Updates the state of the URB after a Transfer + * Complete interrupt on the host channel. Updates the actual_length field + * of the URB based on the number of bytes transferred via the host channel. + * Sets the URB status if the data transfer is finished. + * + * @hsotg: Programming view of the DWC_otg controller + * @chan: Programming view of host channel + * @chnum: Channel number + * @urb: Processing URB + * @qtd: Queue transfer descriptor + * + * Return: 1 if the data transfer specified by the URB is completely finished, + * 0 otherwise + */ +static int dwc2_update_urb_state(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_hcd_urb *urb, + struct dwc2_qtd *qtd) +{ + u32 hctsiz; + int xfer_done = 0; + int short_read = 0; + int xfer_length = dwc2_get_actual_xfer_length(hsotg, chan, chnum, qtd, + DWC2_HC_XFER_COMPLETE, + &short_read); + + if (urb->actual_length + xfer_length > urb->length) { + dev_dbg(hsotg->dev, "%s(): trimming xfer length\n", __func__); + xfer_length = urb->length - urb->actual_length; + } + + dev_vdbg(hsotg->dev, "urb->actual_length=%d xfer_length=%d\n", + urb->actual_length, xfer_length); + urb->actual_length += xfer_length; + + if (xfer_length && chan->ep_type == USB_ENDPOINT_XFER_BULK && + (urb->flags & URB_SEND_ZERO_PACKET) && + urb->actual_length >= urb->length && + !(urb->length % chan->max_packet)) { + xfer_done = 0; + } else if (short_read || urb->actual_length >= urb->length) { + xfer_done = 1; + urb->status = 0; + } + + hctsiz = dwc2_readl(hsotg, HCTSIZ(chnum)); + dev_vdbg(hsotg->dev, "DWC_otg: %s: %s, channel %d\n", + __func__, (chan->ep_is_in ? "IN" : "OUT"), chnum); + dev_vdbg(hsotg->dev, " chan->xfer_len %d\n", chan->xfer_len); + dev_vdbg(hsotg->dev, " hctsiz.xfersize %d\n", + (hctsiz & TSIZ_XFERSIZE_MASK) >> TSIZ_XFERSIZE_SHIFT); + dev_vdbg(hsotg->dev, " urb->transfer_buffer_length %d\n", urb->length); + dev_vdbg(hsotg->dev, " urb->actual_length %d\n", urb->actual_length); + dev_vdbg(hsotg->dev, " short_read %d, xfer_done %d\n", short_read, + xfer_done); + + return xfer_done; +} + +/* + * Save the starting data toggle for the next transfer. The data toggle is + * saved in the QH for non-control transfers and it's saved in the QTD for + * control transfers. + */ +void dwc2_hcd_save_data_toggle(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd) +{ + u32 hctsiz = dwc2_readl(hsotg, HCTSIZ(chnum)); + u32 pid = (hctsiz & TSIZ_SC_MC_PID_MASK) >> TSIZ_SC_MC_PID_SHIFT; + + if (chan->ep_type != USB_ENDPOINT_XFER_CONTROL) { + if (WARN(!chan || !chan->qh, + "chan->qh must be specified for non-control eps\n")) + return; + + if (pid == TSIZ_SC_MC_PID_DATA0) + chan->qh->data_toggle = DWC2_HC_PID_DATA0; + else + chan->qh->data_toggle = DWC2_HC_PID_DATA1; + } else { + if (WARN(!qtd, + "qtd must be specified for control eps\n")) + return; + + if (pid == TSIZ_SC_MC_PID_DATA0) + qtd->data_toggle = DWC2_HC_PID_DATA0; + else + qtd->data_toggle = DWC2_HC_PID_DATA1; + } +} + +/** + * dwc2_update_isoc_urb_state() - Updates the state of an Isochronous URB when + * the transfer is stopped for any reason. The fields of the current entry in + * the frame descriptor array are set based on the transfer state and the input + * halt_status. Completes the Isochronous URB if all the URB frames have been + * completed. + * + * @hsotg: Programming view of the DWC_otg controller + * @chan: Programming view of host channel + * @chnum: Channel number + * @halt_status: Reason for halting a host channel + * @qtd: Queue transfer descriptor + * + * Return: DWC2_HC_XFER_COMPLETE if there are more frames remaining to be + * transferred in the URB. Otherwise return DWC2_HC_XFER_URB_COMPLETE. + */ +static enum dwc2_halt_status dwc2_update_isoc_urb_state( + struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan, + int chnum, struct dwc2_qtd *qtd, + enum dwc2_halt_status halt_status) +{ + struct dwc2_hcd_iso_packet_desc *frame_desc; + struct dwc2_hcd_urb *urb = qtd->urb; + + if (!urb) + return DWC2_HC_XFER_NO_HALT_STATUS; + + frame_desc = &urb->iso_descs[qtd->isoc_frame_index]; + + switch (halt_status) { + case DWC2_HC_XFER_COMPLETE: + frame_desc->status = 0; + frame_desc->actual_length = dwc2_get_actual_xfer_length(hsotg, + chan, chnum, qtd, halt_status, NULL); + break; + case DWC2_HC_XFER_FRAME_OVERRUN: + urb->error_count++; + if (chan->ep_is_in) + frame_desc->status = -ENOSR; + else + frame_desc->status = -ECOMM; + frame_desc->actual_length = 0; + break; + case DWC2_HC_XFER_BABBLE_ERR: + urb->error_count++; + frame_desc->status = -EOVERFLOW; + /* Don't need to update actual_length in this case */ + break; + case DWC2_HC_XFER_XACT_ERR: + urb->error_count++; + frame_desc->status = -EPROTO; + frame_desc->actual_length = dwc2_get_actual_xfer_length(hsotg, + chan, chnum, qtd, halt_status, NULL); + + /* Skip whole frame */ + if (chan->qh->do_split && + chan->ep_type == USB_ENDPOINT_XFER_ISOC && chan->ep_is_in && + hsotg->params.host_dma) { + qtd->complete_split = 0; + qtd->isoc_split_offset = 0; + } + + break; + default: + dev_err(hsotg->dev, "Unhandled halt_status (%d)\n", + halt_status); + break; + } + + if (++qtd->isoc_frame_index == urb->packet_count) { + /* + * urb->status is not used for isoc transfers. The individual + * frame_desc statuses are used instead. + */ + dwc2_host_complete(hsotg, qtd, 0); + halt_status = DWC2_HC_XFER_URB_COMPLETE; + } else { + halt_status = DWC2_HC_XFER_COMPLETE; + } + + return halt_status; +} + +/* + * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic + * QHs, removes the QH from the active non-periodic schedule. If any QTDs are + * still linked to the QH, the QH is added to the end of the inactive + * non-periodic schedule. For periodic QHs, removes the QH from the periodic + * schedule if no more QTDs are linked to the QH. + */ +static void dwc2_deactivate_qh(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, + int free_qtd) +{ + int continue_split = 0; + struct dwc2_qtd *qtd; + + if (dbg_qh(qh)) + dev_vdbg(hsotg->dev, " %s(%p,%p,%d)\n", __func__, + hsotg, qh, free_qtd); + + if (list_empty(&qh->qtd_list)) { + dev_dbg(hsotg->dev, "## QTD list empty ##\n"); + goto no_qtd; + } + + qtd = list_first_entry(&qh->qtd_list, struct dwc2_qtd, qtd_list_entry); + + if (qtd->complete_split) + continue_split = 1; + else if (qtd->isoc_split_pos == DWC2_HCSPLT_XACTPOS_MID || + qtd->isoc_split_pos == DWC2_HCSPLT_XACTPOS_END) + continue_split = 1; + + if (free_qtd) { + dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); + continue_split = 0; + } + +no_qtd: + qh->channel = NULL; + dwc2_hcd_qh_deactivate(hsotg, qh, continue_split); +} + +/** + * dwc2_release_channel() - Releases a host channel for use by other transfers + * + * @hsotg: The HCD state structure + * @chan: The host channel to release + * @qtd: The QTD associated with the host channel. This QTD may be + * freed if the transfer is complete or an error has occurred. + * @halt_status: Reason the channel is being released. This status + * determines the actions taken by this function. + * + * Also attempts to select and queue more transactions since at least one host + * channel is available. + */ +static void dwc2_release_channel(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, + struct dwc2_qtd *qtd, + enum dwc2_halt_status halt_status) +{ + enum dwc2_transaction_type tr_type; + u32 haintmsk; + int free_qtd = 0; + + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, " %s: channel %d, halt_status %d\n", + __func__, chan->hc_num, halt_status); + + switch (halt_status) { + case DWC2_HC_XFER_URB_COMPLETE: + free_qtd = 1; + break; + case DWC2_HC_XFER_AHB_ERR: + case DWC2_HC_XFER_STALL: + case DWC2_HC_XFER_BABBLE_ERR: + free_qtd = 1; + break; + case DWC2_HC_XFER_XACT_ERR: + if (qtd && qtd->error_count >= 3) { + dev_vdbg(hsotg->dev, + " Complete URB with transaction error\n"); + free_qtd = 1; + dwc2_host_complete(hsotg, qtd, -EPROTO); + } + break; + case DWC2_HC_XFER_URB_DEQUEUE: + /* + * The QTD has already been removed and the QH has been + * deactivated. Don't want to do anything except release the + * host channel and try to queue more transfers. + */ + goto cleanup; + case DWC2_HC_XFER_PERIODIC_INCOMPLETE: + dev_vdbg(hsotg->dev, " Complete URB with I/O error\n"); + free_qtd = 1; + dwc2_host_complete(hsotg, qtd, -EIO); + break; + case DWC2_HC_XFER_NO_HALT_STATUS: + default: + break; + } + + dwc2_deactivate_qh(hsotg, chan->qh, free_qtd); + +cleanup: + /* + * Release the host channel for use by other transfers. The cleanup + * function clears the channel interrupt enables and conditions, so + * there's no need to clear the Channel Halted interrupt separately. + */ + if (!list_empty(&chan->hc_list_entry)) + list_del(&chan->hc_list_entry); + dwc2_hc_cleanup(hsotg, chan); + list_add_tail(&chan->hc_list_entry, &hsotg->free_hc_list); + + if (hsotg->params.uframe_sched) { + hsotg->available_host_channels++; + } else { + switch (chan->ep_type) { + case USB_ENDPOINT_XFER_CONTROL: + case USB_ENDPOINT_XFER_BULK: + hsotg->non_periodic_channels--; + break; + default: + /* + * Don't release reservations for periodic channels + * here. That's done when a periodic transfer is + * descheduled (i.e. when the QH is removed from the + * periodic schedule). + */ + break; + } + } + + haintmsk = dwc2_readl(hsotg, HAINTMSK); + haintmsk &= ~(1 << chan->hc_num); + dwc2_writel(hsotg, haintmsk, HAINTMSK); + + /* Try to queue more transfers now that there's a free channel */ + tr_type = dwc2_hcd_select_transactions(hsotg); + if (tr_type != DWC2_TRANSACTION_NONE) + dwc2_hcd_queue_transactions(hsotg, tr_type); +} + +/* + * Halts a host channel. If the channel cannot be halted immediately because + * the request queue is full, this function ensures that the FIFO empty + * interrupt for the appropriate queue is enabled so that the halt request can + * be queued when there is space in the request queue. + * + * This function may also be called in DMA mode. In that case, the channel is + * simply released since the core always halts the channel automatically in + * DMA mode. + */ +static void dwc2_halt_channel(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, struct dwc2_qtd *qtd, + enum dwc2_halt_status halt_status) +{ + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "%s()\n", __func__); + + if (hsotg->params.host_dma) { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "DMA enabled\n"); + dwc2_release_channel(hsotg, chan, qtd, halt_status); + return; + } + + /* Slave mode processing */ + dwc2_hc_halt(hsotg, chan, halt_status); + + if (chan->halt_on_queue) { + u32 gintmsk; + + dev_vdbg(hsotg->dev, "Halt on queue\n"); + if (chan->ep_type == USB_ENDPOINT_XFER_CONTROL || + chan->ep_type == USB_ENDPOINT_XFER_BULK) { + dev_vdbg(hsotg->dev, "control/bulk\n"); + /* + * Make sure the Non-periodic Tx FIFO empty interrupt + * is enabled so that the non-periodic schedule will + * be processed + */ + gintmsk = dwc2_readl(hsotg, GINTMSK); + gintmsk |= GINTSTS_NPTXFEMP; + dwc2_writel(hsotg, gintmsk, GINTMSK); + } else { + dev_vdbg(hsotg->dev, "isoc/intr\n"); + /* + * Move the QH from the periodic queued schedule to + * the periodic assigned schedule. This allows the + * halt to be queued when the periodic schedule is + * processed. + */ + list_move_tail(&chan->qh->qh_list_entry, + &hsotg->periodic_sched_assigned); + + /* + * Make sure the Periodic Tx FIFO Empty interrupt is + * enabled so that the periodic schedule will be + * processed + */ + gintmsk = dwc2_readl(hsotg, GINTMSK); + gintmsk |= GINTSTS_PTXFEMP; + dwc2_writel(hsotg, gintmsk, GINTMSK); + } + } +} + +/* + * Performs common cleanup for non-periodic transfers after a Transfer + * Complete interrupt. This function should be called after any endpoint type + * specific handling is finished to release the host channel. + */ +static void dwc2_complete_non_periodic_xfer(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, + int chnum, struct dwc2_qtd *qtd, + enum dwc2_halt_status halt_status) +{ + dev_vdbg(hsotg->dev, "%s()\n", __func__); + + qtd->error_count = 0; + + if (chan->hcint & HCINTMSK_NYET) { + /* + * Got a NYET on the last transaction of the transfer. This + * means that the endpoint should be in the PING state at the + * beginning of the next transfer. + */ + dev_vdbg(hsotg->dev, "got NYET\n"); + chan->qh->ping_state = 1; + } + + /* + * Always halt and release the host channel to make it available for + * more transfers. There may still be more phases for a control + * transfer or more data packets for a bulk transfer at this point, + * but the host channel is still halted. A channel will be reassigned + * to the transfer when the non-periodic schedule is processed after + * the channel is released. This allows transactions to be queued + * properly via dwc2_hcd_queue_transactions, which also enables the + * Tx FIFO Empty interrupt if necessary. + */ + if (chan->ep_is_in) { + /* + * IN transfers in Slave mode require an explicit disable to + * halt the channel. (In DMA mode, this call simply releases + * the channel.) + */ + dwc2_halt_channel(hsotg, chan, qtd, halt_status); + } else { + /* + * The channel is automatically disabled by the core for OUT + * transfers in Slave mode + */ + dwc2_release_channel(hsotg, chan, qtd, halt_status); + } +} + +/* + * Performs common cleanup for periodic transfers after a Transfer Complete + * interrupt. This function should be called after any endpoint type specific + * handling is finished to release the host channel. + */ +static void dwc2_complete_periodic_xfer(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd, + enum dwc2_halt_status halt_status) +{ + u32 hctsiz = dwc2_readl(hsotg, HCTSIZ(chnum)); + + qtd->error_count = 0; + + if (!chan->ep_is_in || (hctsiz & TSIZ_PKTCNT_MASK) == 0) + /* Core halts channel in these cases */ + dwc2_release_channel(hsotg, chan, qtd, halt_status); + else + /* Flush any outstanding requests from the Tx queue */ + dwc2_halt_channel(hsotg, chan, qtd, halt_status); +} + +static int dwc2_xfercomp_isoc_split_in(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd) +{ + struct dwc2_hcd_iso_packet_desc *frame_desc; + u32 len; + u32 hctsiz; + u32 pid; + + if (!qtd->urb) + return 0; + + frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; + len = dwc2_get_actual_xfer_length(hsotg, chan, chnum, qtd, + DWC2_HC_XFER_COMPLETE, NULL); + if (!len && !qtd->isoc_split_offset) { + qtd->complete_split = 0; + return 0; + } + + frame_desc->actual_length += len; + + if (chan->align_buf) { + dev_vdbg(hsotg->dev, "non-aligned buffer\n"); + dma_unmap_single(hsotg->dev, chan->qh->dw_align_buf_dma, + DWC2_KMEM_UNALIGNED_BUF_SIZE, DMA_FROM_DEVICE); + memcpy(qtd->urb->buf + (chan->xfer_dma - qtd->urb->dma), + chan->qh->dw_align_buf, len); + } + + qtd->isoc_split_offset += len; + + hctsiz = dwc2_readl(hsotg, HCTSIZ(chnum)); + pid = (hctsiz & TSIZ_SC_MC_PID_MASK) >> TSIZ_SC_MC_PID_SHIFT; + + if (frame_desc->actual_length >= frame_desc->length || pid == 0) { + frame_desc->status = 0; + qtd->isoc_frame_index++; + qtd->complete_split = 0; + qtd->isoc_split_offset = 0; + } + + if (qtd->isoc_frame_index == qtd->urb->packet_count) { + dwc2_host_complete(hsotg, qtd, 0); + dwc2_release_channel(hsotg, chan, qtd, + DWC2_HC_XFER_URB_COMPLETE); + } else { + dwc2_release_channel(hsotg, chan, qtd, + DWC2_HC_XFER_NO_HALT_STATUS); + } + + return 1; /* Indicates that channel released */ +} + +/* + * Handles a host channel Transfer Complete interrupt. This handler may be + * called in either DMA mode or Slave mode. + */ +static void dwc2_hc_xfercomp_intr(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd) +{ + struct dwc2_hcd_urb *urb = qtd->urb; + enum dwc2_halt_status halt_status = DWC2_HC_XFER_COMPLETE; + int pipe_type; + int urb_xfer_done; + + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, + "--Host Channel %d Interrupt: Transfer Complete--\n", + chnum); + + if (!urb) + goto handle_xfercomp_done; + + pipe_type = dwc2_hcd_get_pipe_type(&urb->pipe_info); + + if (hsotg->params.dma_desc_enable) { + dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum, halt_status); + if (pipe_type == USB_ENDPOINT_XFER_ISOC) + /* Do not disable the interrupt, just clear it */ + return; + goto handle_xfercomp_done; + } + + /* Handle xfer complete on CSPLIT */ + if (chan->qh->do_split) { + if (chan->ep_type == USB_ENDPOINT_XFER_ISOC && chan->ep_is_in && + hsotg->params.host_dma) { + if (qtd->complete_split && + dwc2_xfercomp_isoc_split_in(hsotg, chan, chnum, + qtd)) + goto handle_xfercomp_done; + } else { + qtd->complete_split = 0; + } + } + + /* Update the QTD and URB states */ + switch (pipe_type) { + case USB_ENDPOINT_XFER_CONTROL: + switch (qtd->control_phase) { + case DWC2_CONTROL_SETUP: + if (urb->length > 0) + qtd->control_phase = DWC2_CONTROL_DATA; + else + qtd->control_phase = DWC2_CONTROL_STATUS; + dev_vdbg(hsotg->dev, + " Control setup transaction done\n"); + halt_status = DWC2_HC_XFER_COMPLETE; + break; + case DWC2_CONTROL_DATA: + urb_xfer_done = dwc2_update_urb_state(hsotg, chan, + chnum, urb, qtd); + if (urb_xfer_done) { + qtd->control_phase = DWC2_CONTROL_STATUS; + dev_vdbg(hsotg->dev, + " Control data transfer done\n"); + } else { + dwc2_hcd_save_data_toggle(hsotg, chan, chnum, + qtd); + } + halt_status = DWC2_HC_XFER_COMPLETE; + break; + case DWC2_CONTROL_STATUS: + dev_vdbg(hsotg->dev, " Control transfer complete\n"); + if (urb->status == -EINPROGRESS) + urb->status = 0; + dwc2_host_complete(hsotg, qtd, urb->status); + halt_status = DWC2_HC_XFER_URB_COMPLETE; + break; + } + + dwc2_complete_non_periodic_xfer(hsotg, chan, chnum, qtd, + halt_status); + break; + case USB_ENDPOINT_XFER_BULK: + dev_vdbg(hsotg->dev, " Bulk transfer complete\n"); + urb_xfer_done = dwc2_update_urb_state(hsotg, chan, chnum, urb, + qtd); + if (urb_xfer_done) { + dwc2_host_complete(hsotg, qtd, urb->status); + halt_status = DWC2_HC_XFER_URB_COMPLETE; + } else { + halt_status = DWC2_HC_XFER_COMPLETE; + } + + dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd); + dwc2_complete_non_periodic_xfer(hsotg, chan, chnum, qtd, + halt_status); + break; + case USB_ENDPOINT_XFER_INT: + dev_vdbg(hsotg->dev, " Interrupt transfer complete\n"); + urb_xfer_done = dwc2_update_urb_state(hsotg, chan, chnum, urb, + qtd); + + /* + * Interrupt URB is done on the first transfer complete + * interrupt + */ + if (urb_xfer_done) { + dwc2_host_complete(hsotg, qtd, urb->status); + halt_status = DWC2_HC_XFER_URB_COMPLETE; + } else { + halt_status = DWC2_HC_XFER_COMPLETE; + } + + dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd); + dwc2_complete_periodic_xfer(hsotg, chan, chnum, qtd, + halt_status); + break; + case USB_ENDPOINT_XFER_ISOC: + if (dbg_perio()) + dev_vdbg(hsotg->dev, " Isochronous transfer complete\n"); + if (qtd->isoc_split_pos == DWC2_HCSPLT_XACTPOS_ALL) + halt_status = dwc2_update_isoc_urb_state(hsotg, chan, + chnum, qtd, + DWC2_HC_XFER_COMPLETE); + dwc2_complete_periodic_xfer(hsotg, chan, chnum, qtd, + halt_status); + break; + } + +handle_xfercomp_done: + disable_hc_int(hsotg, chnum, HCINTMSK_XFERCOMPL); +} + +/* + * Handles a host channel STALL interrupt. This handler may be called in + * either DMA mode or Slave mode. + */ +static void dwc2_hc_stall_intr(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd) +{ + struct dwc2_hcd_urb *urb = qtd->urb; + int pipe_type; + + dev_dbg(hsotg->dev, "--Host Channel %d Interrupt: STALL Received--\n", + chnum); + + if (hsotg->params.dma_desc_enable) { + dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum, + DWC2_HC_XFER_STALL); + goto handle_stall_done; + } + + if (!urb) + goto handle_stall_halt; + + pipe_type = dwc2_hcd_get_pipe_type(&urb->pipe_info); + + if (pipe_type == USB_ENDPOINT_XFER_CONTROL) + dwc2_host_complete(hsotg, qtd, -EPIPE); + + if (pipe_type == USB_ENDPOINT_XFER_BULK || + pipe_type == USB_ENDPOINT_XFER_INT) { + dwc2_host_complete(hsotg, qtd, -EPIPE); + /* + * USB protocol requires resetting the data toggle for bulk + * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT) + * setup command is issued to the endpoint. Anticipate the + * CLEAR_FEATURE command since a STALL has occurred and reset + * the data toggle now. + */ + chan->qh->data_toggle = 0; + } + +handle_stall_halt: + dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_STALL); + +handle_stall_done: + disable_hc_int(hsotg, chnum, HCINTMSK_STALL); +} + +/* + * Updates the state of the URB when a transfer has been stopped due to an + * abnormal condition before the transfer completes. Modifies the + * actual_length field of the URB to reflect the number of bytes that have + * actually been transferred via the host channel. + */ +static void dwc2_update_urb_state_abn(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_hcd_urb *urb, + struct dwc2_qtd *qtd, + enum dwc2_halt_status halt_status) +{ + u32 xfer_length = dwc2_get_actual_xfer_length(hsotg, chan, chnum, + qtd, halt_status, NULL); + u32 hctsiz; + + if (urb->actual_length + xfer_length > urb->length) { + dev_warn(hsotg->dev, "%s(): trimming xfer length\n", __func__); + xfer_length = urb->length - urb->actual_length; + } + + urb->actual_length += xfer_length; + + hctsiz = dwc2_readl(hsotg, HCTSIZ(chnum)); + dev_vdbg(hsotg->dev, "DWC_otg: %s: %s, channel %d\n", + __func__, (chan->ep_is_in ? "IN" : "OUT"), chnum); + dev_vdbg(hsotg->dev, " chan->start_pkt_count %d\n", + chan->start_pkt_count); + dev_vdbg(hsotg->dev, " hctsiz.pktcnt %d\n", + (hctsiz & TSIZ_PKTCNT_MASK) >> TSIZ_PKTCNT_SHIFT); + dev_vdbg(hsotg->dev, " chan->max_packet %d\n", chan->max_packet); + dev_vdbg(hsotg->dev, " bytes_transferred %d\n", + xfer_length); + dev_vdbg(hsotg->dev, " urb->actual_length %d\n", + urb->actual_length); + dev_vdbg(hsotg->dev, " urb->transfer_buffer_length %d\n", + urb->length); +} + +/* + * Handles a host channel NAK interrupt. This handler may be called in either + * DMA mode or Slave mode. + */ +static void dwc2_hc_nak_intr(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd) +{ + if (!qtd) { + dev_dbg(hsotg->dev, "%s: qtd is NULL\n", __func__); + return; + } + + if (!qtd->urb) { + dev_dbg(hsotg->dev, "%s: qtd->urb is NULL\n", __func__); + return; + } + + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "--Host Channel %d Interrupt: NAK Received--\n", + chnum); + + /* + * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and + * interrupt. Re-start the SSPLIT transfer. + * + * Normally for non-periodic transfers we'll retry right away, but to + * avoid interrupt storms we'll wait before retrying if we've got + * several NAKs. If we didn't do this we'd retry directly from the + * interrupt handler and could end up quickly getting another + * interrupt (another NAK), which we'd retry. Note that we do not + * delay retries for IN parts of control requests, as those are expected + * to complete fairly quickly, and if we delay them we risk confusing + * the device and cause it issue STALL. + * + * Note that in DMA mode software only gets involved to re-send NAKed + * transfers for split transactions, so we only need to apply this + * delaying logic when handling splits. In non-DMA mode presumably we + * might want a similar delay if someone can demonstrate this problem + * affects that code path too. + */ + if (chan->do_split) { + if (chan->complete_split) + qtd->error_count = 0; + qtd->complete_split = 0; + qtd->num_naks++; + qtd->qh->want_wait = qtd->num_naks >= DWC2_NAKS_BEFORE_DELAY && + !(chan->ep_type == USB_ENDPOINT_XFER_CONTROL && + chan->ep_is_in); + dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NAK); + goto handle_nak_done; + } + + switch (dwc2_hcd_get_pipe_type(&qtd->urb->pipe_info)) { + case USB_ENDPOINT_XFER_CONTROL: + case USB_ENDPOINT_XFER_BULK: + if (hsotg->params.host_dma && chan->ep_is_in) { + /* + * NAK interrupts are enabled on bulk/control IN + * transfers in DMA mode for the sole purpose of + * resetting the error count after a transaction error + * occurs. The core will continue transferring data. + */ + qtd->error_count = 0; + break; + } + + /* + * NAK interrupts normally occur during OUT transfers in DMA + * or Slave mode. For IN transfers, more requests will be + * queued as request queue space is available. + */ + qtd->error_count = 0; + + if (!chan->qh->ping_state) { + dwc2_update_urb_state_abn(hsotg, chan, chnum, qtd->urb, + qtd, DWC2_HC_XFER_NAK); + dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd); + + if (chan->speed == USB_SPEED_HIGH) + chan->qh->ping_state = 1; + } + + /* + * Halt the channel so the transfer can be re-started from + * the appropriate point or the PING protocol will + * start/continue + */ + dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NAK); + break; + case USB_ENDPOINT_XFER_INT: + qtd->error_count = 0; + dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NAK); + break; + case USB_ENDPOINT_XFER_ISOC: + /* Should never get called for isochronous transfers */ + dev_err(hsotg->dev, "NACK interrupt for ISOC transfer\n"); + break; + } + +handle_nak_done: + disable_hc_int(hsotg, chnum, HCINTMSK_NAK); +} + +/* + * Handles a host channel ACK interrupt. This interrupt is enabled when + * performing the PING protocol in Slave mode, when errors occur during + * either Slave mode or DMA mode, and during Start Split transactions. + */ +static void dwc2_hc_ack_intr(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd) +{ + struct dwc2_hcd_iso_packet_desc *frame_desc; + + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "--Host Channel %d Interrupt: ACK Received--\n", + chnum); + + if (chan->do_split) { + /* Handle ACK on SSPLIT. ACK should not occur in CSPLIT. */ + if (!chan->ep_is_in && + chan->data_pid_start != DWC2_HC_PID_SETUP) + qtd->ssplit_out_xfer_count = chan->xfer_len; + + if (chan->ep_type != USB_ENDPOINT_XFER_ISOC || chan->ep_is_in) { + qtd->complete_split = 1; + dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_ACK); + } else { + /* ISOC OUT */ + switch (chan->xact_pos) { + case DWC2_HCSPLT_XACTPOS_ALL: + break; + case DWC2_HCSPLT_XACTPOS_END: + qtd->isoc_split_pos = DWC2_HCSPLT_XACTPOS_ALL; + qtd->isoc_split_offset = 0; + break; + case DWC2_HCSPLT_XACTPOS_BEGIN: + case DWC2_HCSPLT_XACTPOS_MID: + /* + * For BEGIN or MID, calculate the length for + * the next microframe to determine the correct + * SSPLIT token, either MID or END + */ + frame_desc = &qtd->urb->iso_descs[ + qtd->isoc_frame_index]; + qtd->isoc_split_offset += 188; + + if (frame_desc->length - qtd->isoc_split_offset + <= 188) + qtd->isoc_split_pos = + DWC2_HCSPLT_XACTPOS_END; + else + qtd->isoc_split_pos = + DWC2_HCSPLT_XACTPOS_MID; + break; + } + } + } else { + qtd->error_count = 0; + + if (chan->qh->ping_state) { + chan->qh->ping_state = 0; + /* + * Halt the channel so the transfer can be re-started + * from the appropriate point. This only happens in + * Slave mode. In DMA mode, the ping_state is cleared + * when the transfer is started because the core + * automatically executes the PING, then the transfer. + */ + dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_ACK); + } + } + + /* + * If the ACK occurred when _not_ in the PING state, let the channel + * continue transferring data after clearing the error count + */ + disable_hc_int(hsotg, chnum, HCINTMSK_ACK); +} + +/* + * Handles a host channel NYET interrupt. This interrupt should only occur on + * Bulk and Control OUT endpoints and for complete split transactions. If a + * NYET occurs at the same time as a Transfer Complete interrupt, it is + * handled in the xfercomp interrupt handler, not here. This handler may be + * called in either DMA mode or Slave mode. + */ +static void dwc2_hc_nyet_intr(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd) +{ + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "--Host Channel %d Interrupt: NYET Received--\n", + chnum); + + /* + * NYET on CSPLIT + * re-do the CSPLIT immediately on non-periodic + */ + if (chan->do_split && chan->complete_split) { + if (chan->ep_is_in && chan->ep_type == USB_ENDPOINT_XFER_ISOC && + hsotg->params.host_dma) { + qtd->complete_split = 0; + qtd->isoc_split_offset = 0; + qtd->isoc_frame_index++; + if (qtd->urb && + qtd->isoc_frame_index == qtd->urb->packet_count) { + dwc2_host_complete(hsotg, qtd, 0); + dwc2_release_channel(hsotg, chan, qtd, + DWC2_HC_XFER_URB_COMPLETE); + } else { + dwc2_release_channel(hsotg, chan, qtd, + DWC2_HC_XFER_NO_HALT_STATUS); + } + goto handle_nyet_done; + } + + if (chan->ep_type == USB_ENDPOINT_XFER_INT || + chan->ep_type == USB_ENDPOINT_XFER_ISOC) { + struct dwc2_qh *qh = chan->qh; + bool past_end; + + if (!hsotg->params.uframe_sched) { + int frnum = dwc2_hcd_get_frame_number(hsotg); + + /* Don't have num_hs_transfers; simple logic */ + past_end = dwc2_full_frame_num(frnum) != + dwc2_full_frame_num(qh->next_active_frame); + } else { + int end_frnum; + + /* + * Figure out the end frame based on + * schedule. + * + * We don't want to go on trying again + * and again forever. Let's stop when + * we've done all the transfers that + * were scheduled. + * + * We're going to be comparing + * start_active_frame and + * next_active_frame, both of which + * are 1 before the time the packet + * goes on the wire, so that cancels + * out. Basically if had 1 transfer + * and we saw 1 NYET then we're done. + * We're getting a NYET here so if + * next >= (start + num_transfers) + * we're done. The complexity is that + * for all but ISOC_OUT we skip one + * slot. + */ + end_frnum = dwc2_frame_num_inc( + qh->start_active_frame, + qh->num_hs_transfers); + + if (qh->ep_type != USB_ENDPOINT_XFER_ISOC || + qh->ep_is_in) + end_frnum = + dwc2_frame_num_inc(end_frnum, 1); + + past_end = dwc2_frame_num_le( + end_frnum, qh->next_active_frame); + } + + if (past_end) { + /* Treat this as a transaction error. */ +#if 0 + /* + * Todo: Fix system performance so this can + * be treated as an error. Right now complete + * splits cannot be scheduled precisely enough + * due to other system activity, so this error + * occurs regularly in Slave mode. + */ + qtd->error_count++; +#endif + qtd->complete_split = 0; + dwc2_halt_channel(hsotg, chan, qtd, + DWC2_HC_XFER_XACT_ERR); + /* Todo: add support for isoc release */ + goto handle_nyet_done; + } + } + + dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NYET); + goto handle_nyet_done; + } + + chan->qh->ping_state = 1; + qtd->error_count = 0; + + dwc2_update_urb_state_abn(hsotg, chan, chnum, qtd->urb, qtd, + DWC2_HC_XFER_NYET); + dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd); + + /* + * Halt the channel and re-start the transfer so the PING protocol + * will start + */ + dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NYET); + +handle_nyet_done: + disable_hc_int(hsotg, chnum, HCINTMSK_NYET); +} + +/* + * Handles a host channel babble interrupt. This handler may be called in + * either DMA mode or Slave mode. + */ +static void dwc2_hc_babble_intr(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd) +{ + dev_dbg(hsotg->dev, "--Host Channel %d Interrupt: Babble Error--\n", + chnum); + + dwc2_hc_handle_tt_clear(hsotg, chan, qtd); + + if (hsotg->params.dma_desc_enable) { + dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum, + DWC2_HC_XFER_BABBLE_ERR); + goto disable_int; + } + + if (chan->ep_type != USB_ENDPOINT_XFER_ISOC) { + dwc2_host_complete(hsotg, qtd, -EOVERFLOW); + dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_BABBLE_ERR); + } else { + enum dwc2_halt_status halt_status; + + halt_status = dwc2_update_isoc_urb_state(hsotg, chan, chnum, + qtd, DWC2_HC_XFER_BABBLE_ERR); + dwc2_halt_channel(hsotg, chan, qtd, halt_status); + } + +disable_int: + disable_hc_int(hsotg, chnum, HCINTMSK_BBLERR); +} + +/* + * Handles a host channel AHB error interrupt. This handler is only called in + * DMA mode. + */ +static void dwc2_hc_ahberr_intr(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd) +{ + struct dwc2_hcd_urb *urb = qtd->urb; + char *pipetype, *speed; + u32 hcchar; + u32 hcsplt; + u32 hctsiz; + u32 hc_dma; + + dev_dbg(hsotg->dev, "--Host Channel %d Interrupt: AHB Error--\n", + chnum); + + if (!urb) + goto handle_ahberr_halt; + + dwc2_hc_handle_tt_clear(hsotg, chan, qtd); + + hcchar = dwc2_readl(hsotg, HCCHAR(chnum)); + hcsplt = dwc2_readl(hsotg, HCSPLT(chnum)); + hctsiz = dwc2_readl(hsotg, HCTSIZ(chnum)); + hc_dma = dwc2_readl(hsotg, HCDMA(chnum)); + + dev_err(hsotg->dev, "AHB ERROR, Channel %d\n", chnum); + dev_err(hsotg->dev, " hcchar 0x%08x, hcsplt 0x%08x\n", hcchar, hcsplt); + dev_err(hsotg->dev, " hctsiz 0x%08x, hc_dma 0x%08x\n", hctsiz, hc_dma); + dev_err(hsotg->dev, " Device address: %d\n", + dwc2_hcd_get_dev_addr(&urb->pipe_info)); + dev_err(hsotg->dev, " Endpoint: %d, %s\n", + dwc2_hcd_get_ep_num(&urb->pipe_info), + dwc2_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT"); + + switch (dwc2_hcd_get_pipe_type(&urb->pipe_info)) { + case USB_ENDPOINT_XFER_CONTROL: + pipetype = "CONTROL"; + break; + case USB_ENDPOINT_XFER_BULK: + pipetype = "BULK"; + break; + case USB_ENDPOINT_XFER_INT: + pipetype = "INTERRUPT"; + break; + case USB_ENDPOINT_XFER_ISOC: + pipetype = "ISOCHRONOUS"; + break; + default: + pipetype = "UNKNOWN"; + break; + } + + dev_err(hsotg->dev, " Endpoint type: %s\n", pipetype); + + switch (chan->speed) { + case USB_SPEED_HIGH: + speed = "HIGH"; + break; + case USB_SPEED_FULL: + speed = "FULL"; + break; + case USB_SPEED_LOW: + speed = "LOW"; + break; + default: + speed = "UNKNOWN"; + break; + } + + dev_err(hsotg->dev, " Speed: %s\n", speed); + + dev_err(hsotg->dev, " Max packet size: %d (mult %d)\n", + dwc2_hcd_get_maxp(&urb->pipe_info), + dwc2_hcd_get_maxp_mult(&urb->pipe_info)); + dev_err(hsotg->dev, " Data buffer length: %d\n", urb->length); + dev_err(hsotg->dev, " Transfer buffer: %p, Transfer DMA: %08lx\n", + urb->buf, (unsigned long)urb->dma); + dev_err(hsotg->dev, " Setup buffer: %p, Setup DMA: %08lx\n", + urb->setup_packet, (unsigned long)urb->setup_dma); + dev_err(hsotg->dev, " Interval: %d\n", urb->interval); + + /* Core halts the channel for Descriptor DMA mode */ + if (hsotg->params.dma_desc_enable) { + dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum, + DWC2_HC_XFER_AHB_ERR); + goto handle_ahberr_done; + } + + dwc2_host_complete(hsotg, qtd, -EIO); + +handle_ahberr_halt: + /* + * Force a channel halt. Don't call dwc2_halt_channel because that won't + * write to the HCCHARn register in DMA mode to force the halt. + */ + dwc2_hc_halt(hsotg, chan, DWC2_HC_XFER_AHB_ERR); + +handle_ahberr_done: + disable_hc_int(hsotg, chnum, HCINTMSK_AHBERR); +} + +/* + * Handles a host channel transaction error interrupt. This handler may be + * called in either DMA mode or Slave mode. + */ +static void dwc2_hc_xacterr_intr(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd) +{ + dev_dbg(hsotg->dev, + "--Host Channel %d Interrupt: Transaction Error--\n", chnum); + + dwc2_hc_handle_tt_clear(hsotg, chan, qtd); + + if (hsotg->params.dma_desc_enable) { + dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum, + DWC2_HC_XFER_XACT_ERR); + goto handle_xacterr_done; + } + + switch (dwc2_hcd_get_pipe_type(&qtd->urb->pipe_info)) { + case USB_ENDPOINT_XFER_CONTROL: + case USB_ENDPOINT_XFER_BULK: + qtd->error_count++; + if (!chan->qh->ping_state) { + dwc2_update_urb_state_abn(hsotg, chan, chnum, qtd->urb, + qtd, DWC2_HC_XFER_XACT_ERR); + dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd); + if (!chan->ep_is_in && chan->speed == USB_SPEED_HIGH) + chan->qh->ping_state = 1; + } + + /* + * Halt the channel so the transfer can be re-started from + * the appropriate point or the PING protocol will start + */ + dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_XACT_ERR); + break; + case USB_ENDPOINT_XFER_INT: + qtd->error_count++; + if (chan->do_split && chan->complete_split) + qtd->complete_split = 0; + dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_XACT_ERR); + break; + case USB_ENDPOINT_XFER_ISOC: + { + enum dwc2_halt_status halt_status; + + halt_status = dwc2_update_isoc_urb_state(hsotg, chan, + chnum, qtd, DWC2_HC_XFER_XACT_ERR); + dwc2_halt_channel(hsotg, chan, qtd, halt_status); + } + break; + } + +handle_xacterr_done: + disable_hc_int(hsotg, chnum, HCINTMSK_XACTERR); +} + +/* + * Handles a host channel frame overrun interrupt. This handler may be called + * in either DMA mode or Slave mode. + */ +static void dwc2_hc_frmovrun_intr(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd) +{ + enum dwc2_halt_status halt_status; + + if (dbg_hc(chan)) + dev_dbg(hsotg->dev, "--Host Channel %d Interrupt: Frame Overrun--\n", + chnum); + + dwc2_hc_handle_tt_clear(hsotg, chan, qtd); + + switch (dwc2_hcd_get_pipe_type(&qtd->urb->pipe_info)) { + case USB_ENDPOINT_XFER_CONTROL: + case USB_ENDPOINT_XFER_BULK: + break; + case USB_ENDPOINT_XFER_INT: + dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_FRAME_OVERRUN); + break; + case USB_ENDPOINT_XFER_ISOC: + halt_status = dwc2_update_isoc_urb_state(hsotg, chan, chnum, + qtd, DWC2_HC_XFER_FRAME_OVERRUN); + dwc2_halt_channel(hsotg, chan, qtd, halt_status); + break; + } + + disable_hc_int(hsotg, chnum, HCINTMSK_FRMOVRUN); +} + +/* + * Handles a host channel data toggle error interrupt. This handler may be + * called in either DMA mode or Slave mode. + */ +static void dwc2_hc_datatglerr_intr(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd) +{ + dev_dbg(hsotg->dev, + "--Host Channel %d Interrupt: Data Toggle Error--\n", chnum); + + if (chan->ep_is_in) + qtd->error_count = 0; + else + dev_err(hsotg->dev, + "Data Toggle Error on OUT transfer, channel %d\n", + chnum); + + dwc2_hc_handle_tt_clear(hsotg, chan, qtd); + disable_hc_int(hsotg, chnum, HCINTMSK_DATATGLERR); +} + +/* + * For debug only. It checks that a valid halt status is set and that + * HCCHARn.chdis is clear. If there's a problem, corrective action is + * taken and a warning is issued. + * + * Return: true if halt status is ok, false otherwise + */ +static bool dwc2_halt_status_ok(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd) +{ +#ifdef DEBUG + u32 hcchar; + u32 hctsiz; + u32 hcintmsk; + u32 hcsplt; + + if (chan->halt_status == DWC2_HC_XFER_NO_HALT_STATUS) { + /* + * This code is here only as a check. This condition should + * never happen. Ignore the halt if it does occur. + */ + hcchar = dwc2_readl(hsotg, HCCHAR(chnum)); + hctsiz = dwc2_readl(hsotg, HCTSIZ(chnum)); + hcintmsk = dwc2_readl(hsotg, HCINTMSK(chnum)); + hcsplt = dwc2_readl(hsotg, HCSPLT(chnum)); + dev_dbg(hsotg->dev, + "%s: chan->halt_status DWC2_HC_XFER_NO_HALT_STATUS,\n", + __func__); + dev_dbg(hsotg->dev, + "channel %d, hcchar 0x%08x, hctsiz 0x%08x,\n", + chnum, hcchar, hctsiz); + dev_dbg(hsotg->dev, + "hcint 0x%08x, hcintmsk 0x%08x, hcsplt 0x%08x,\n", + chan->hcint, hcintmsk, hcsplt); + if (qtd) + dev_dbg(hsotg->dev, "qtd->complete_split %d\n", + qtd->complete_split); + dev_warn(hsotg->dev, + "%s: no halt status, channel %d, ignoring interrupt\n", + __func__, chnum); + return false; + } + + /* + * This code is here only as a check. hcchar.chdis should never be set + * when the halt interrupt occurs. Halt the channel again if it does + * occur. + */ + hcchar = dwc2_readl(hsotg, HCCHAR(chnum)); + if (hcchar & HCCHAR_CHDIS) { + dev_warn(hsotg->dev, + "%s: hcchar.chdis set unexpectedly, hcchar 0x%08x, trying to halt again\n", + __func__, hcchar); + chan->halt_pending = 0; + dwc2_halt_channel(hsotg, chan, qtd, chan->halt_status); + return false; + } +#endif + + return true; +} + +/* + * Handles a host Channel Halted interrupt in DMA mode. This handler + * determines the reason the channel halted and proceeds accordingly. + */ +static void dwc2_hc_chhltd_intr_dma(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd) +{ + u32 hcintmsk; + int out_nak_enh = 0; + + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, + "--Host Channel %d Interrupt: DMA Channel Halted--\n", + chnum); + + /* + * For core with OUT NAK enhancement, the flow for high-speed + * CONTROL/BULK OUT is handled a little differently + */ + if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_2_71a) { + if (chan->speed == USB_SPEED_HIGH && !chan->ep_is_in && + (chan->ep_type == USB_ENDPOINT_XFER_CONTROL || + chan->ep_type == USB_ENDPOINT_XFER_BULK)) { + out_nak_enh = 1; + } + } + + if (chan->halt_status == DWC2_HC_XFER_URB_DEQUEUE || + (chan->halt_status == DWC2_HC_XFER_AHB_ERR && + !hsotg->params.dma_desc_enable)) { + if (hsotg->params.dma_desc_enable) + dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum, + chan->halt_status); + else + /* + * Just release the channel. A dequeue can happen on a + * transfer timeout. In the case of an AHB Error, the + * channel was forced to halt because there's no way to + * gracefully recover. + */ + dwc2_release_channel(hsotg, chan, qtd, + chan->halt_status); + return; + } + + hcintmsk = dwc2_readl(hsotg, HCINTMSK(chnum)); + + if (chan->hcint & HCINTMSK_XFERCOMPL) { + /* + * Todo: This is here because of a possible hardware bug. Spec + * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT + * interrupt w/ACK bit set should occur, but I only see the + * XFERCOMP bit, even with it masked out. This is a workaround + * for that behavior. Should fix this when hardware is fixed. + */ + if (chan->ep_type == USB_ENDPOINT_XFER_ISOC && !chan->ep_is_in) + dwc2_hc_ack_intr(hsotg, chan, chnum, qtd); + dwc2_hc_xfercomp_intr(hsotg, chan, chnum, qtd); + } else if (chan->hcint & HCINTMSK_STALL) { + dwc2_hc_stall_intr(hsotg, chan, chnum, qtd); + } else if ((chan->hcint & HCINTMSK_XACTERR) && + !hsotg->params.dma_desc_enable) { + if (out_nak_enh) { + if (chan->hcint & + (HCINTMSK_NYET | HCINTMSK_NAK | HCINTMSK_ACK)) { + dev_vdbg(hsotg->dev, + "XactErr with NYET/NAK/ACK\n"); + qtd->error_count = 0; + } else { + dev_vdbg(hsotg->dev, + "XactErr without NYET/NAK/ACK\n"); + } + } + + /* + * Must handle xacterr before nak or ack. Could get a xacterr + * at the same time as either of these on a BULK/CONTROL OUT + * that started with a PING. The xacterr takes precedence. + */ + dwc2_hc_xacterr_intr(hsotg, chan, chnum, qtd); + } else if ((chan->hcint & HCINTMSK_XCS_XACT) && + hsotg->params.dma_desc_enable) { + dwc2_hc_xacterr_intr(hsotg, chan, chnum, qtd); + } else if ((chan->hcint & HCINTMSK_AHBERR) && + hsotg->params.dma_desc_enable) { + dwc2_hc_ahberr_intr(hsotg, chan, chnum, qtd); + } else if (chan->hcint & HCINTMSK_BBLERR) { + dwc2_hc_babble_intr(hsotg, chan, chnum, qtd); + } else if (chan->hcint & HCINTMSK_FRMOVRUN) { + dwc2_hc_frmovrun_intr(hsotg, chan, chnum, qtd); + } else if (!out_nak_enh) { + if (chan->hcint & HCINTMSK_NYET) { + /* + * Must handle nyet before nak or ack. Could get a nyet + * at the same time as either of those on a BULK/CONTROL + * OUT that started with a PING. The nyet takes + * precedence. + */ + dwc2_hc_nyet_intr(hsotg, chan, chnum, qtd); + } else if ((chan->hcint & HCINTMSK_NAK) && + !(hcintmsk & HCINTMSK_NAK)) { + /* + * If nak is not masked, it's because a non-split IN + * transfer is in an error state. In that case, the nak + * is handled by the nak interrupt handler, not here. + * Handle nak here for BULK/CONTROL OUT transfers, which + * halt on a NAK to allow rewinding the buffer pointer. + */ + dwc2_hc_nak_intr(hsotg, chan, chnum, qtd); + } else if ((chan->hcint & HCINTMSK_ACK) && + !(hcintmsk & HCINTMSK_ACK)) { + /* + * If ack is not masked, it's because a non-split IN + * transfer is in an error state. In that case, the ack + * is handled by the ack interrupt handler, not here. + * Handle ack here for split transfers. Start splits + * halt on ACK. + */ + dwc2_hc_ack_intr(hsotg, chan, chnum, qtd); + } else { + if (chan->ep_type == USB_ENDPOINT_XFER_INT || + chan->ep_type == USB_ENDPOINT_XFER_ISOC) { + /* + * A periodic transfer halted with no other + * channel interrupts set. Assume it was halted + * by the core because it could not be completed + * in its scheduled (micro)frame. + */ + dev_dbg(hsotg->dev, + "%s: Halt channel %d (assume incomplete periodic transfer)\n", + __func__, chnum); + dwc2_halt_channel(hsotg, chan, qtd, + DWC2_HC_XFER_PERIODIC_INCOMPLETE); + } else { + dev_err(hsotg->dev, + "%s: Channel %d - ChHltd set, but reason is unknown\n", + __func__, chnum); + dev_err(hsotg->dev, + "hcint 0x%08x, intsts 0x%08x\n", + chan->hcint, + dwc2_readl(hsotg, GINTSTS)); + goto error; + } + } + } else { + dev_info(hsotg->dev, + "NYET/NAK/ACK/other in non-error case, 0x%08x\n", + chan->hcint); +error: + /* Failthrough: use 3-strikes rule */ + qtd->error_count++; + dwc2_update_urb_state_abn(hsotg, chan, chnum, qtd->urb, + qtd, DWC2_HC_XFER_XACT_ERR); + /* + * We can get here after a completed transaction + * (urb->actual_length >= urb->length) which was not reported + * as completed. If that is the case, and we do not abort + * the transfer, a transfer of size 0 will be enqueued + * subsequently. If urb->actual_length is not DMA-aligned, + * the buffer will then point to an unaligned address, and + * the resulting behavior is undefined. Bail out in that + * situation. + */ + if (qtd->urb->actual_length >= qtd->urb->length) + qtd->error_count = 3; + dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd); + dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_XACT_ERR); + } +} + +/* + * Handles a host channel Channel Halted interrupt + * + * In slave mode, this handler is called only when the driver specifically + * requests a halt. This occurs during handling other host channel interrupts + * (e.g. nak, xacterr, stall, nyet, etc.). + * + * In DMA mode, this is the interrupt that occurs when the core has finished + * processing a transfer on a channel. Other host channel interrupts (except + * ahberr) are disabled in DMA mode. + */ +static void dwc2_hc_chhltd_intr(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd) +{ + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "--Host Channel %d Interrupt: Channel Halted--\n", + chnum); + + if (hsotg->params.host_dma) { + dwc2_hc_chhltd_intr_dma(hsotg, chan, chnum, qtd); + } else { + if (!dwc2_halt_status_ok(hsotg, chan, chnum, qtd)) + return; + dwc2_release_channel(hsotg, chan, qtd, chan->halt_status); + } +} + +/* + * Check if the given qtd is still the top of the list (and thus valid). + * + * If dwc2_hcd_qtd_unlink_and_free() has been called since we grabbed + * the qtd from the top of the list, this will return false (otherwise true). + */ +static bool dwc2_check_qtd_still_ok(struct dwc2_qtd *qtd, struct dwc2_qh *qh) +{ + struct dwc2_qtd *cur_head; + + if (!qh) + return false; + + cur_head = list_first_entry(&qh->qtd_list, struct dwc2_qtd, + qtd_list_entry); + return (cur_head == qtd); +} + +/* Handles interrupt for a specific Host Channel */ +static void dwc2_hc_n_intr(struct dwc2_hsotg *hsotg, int chnum) +{ + struct dwc2_qtd *qtd; + struct dwc2_host_chan *chan; + u32 hcint, hcintraw, hcintmsk; + + chan = hsotg->hc_ptr_array[chnum]; + + hcintraw = dwc2_readl(hsotg, HCINT(chnum)); + hcintmsk = dwc2_readl(hsotg, HCINTMSK(chnum)); + hcint = hcintraw & hcintmsk; + dwc2_writel(hsotg, hcint, HCINT(chnum)); + + if (!chan) { + dev_err(hsotg->dev, "## hc_ptr_array for channel is NULL ##\n"); + return; + } + + if (dbg_hc(chan)) { + dev_vdbg(hsotg->dev, "--Host Channel Interrupt--, Channel %d\n", + chnum); + dev_vdbg(hsotg->dev, + " hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n", + hcintraw, hcintmsk, hcint); + } + + /* + * If we got an interrupt after someone called + * dwc2_hcd_endpoint_disable() we don't want to crash below + */ + if (!chan->qh) { + dev_warn(hsotg->dev, "Interrupt on disabled channel\n"); + return; + } + + chan->hcint = hcintraw; + + /* + * If the channel was halted due to a dequeue, the qtd list might + * be empty or at least the first entry will not be the active qtd. + * In this case, take a shortcut and just release the channel. + */ + if (chan->halt_status == DWC2_HC_XFER_URB_DEQUEUE) { + /* + * If the channel was halted, this should be the only + * interrupt unmasked + */ + WARN_ON(hcint != HCINTMSK_CHHLTD); + if (hsotg->params.dma_desc_enable) + dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum, + chan->halt_status); + else + dwc2_release_channel(hsotg, chan, NULL, + chan->halt_status); + return; + } + + if (list_empty(&chan->qh->qtd_list)) { + /* + * TODO: Will this ever happen with the + * DWC2_HC_XFER_URB_DEQUEUE handling above? + */ + dev_dbg(hsotg->dev, "## no QTD queued for channel %d ##\n", + chnum); + dev_dbg(hsotg->dev, + " hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n", + chan->hcint, hcintmsk, hcint); + chan->halt_status = DWC2_HC_XFER_NO_HALT_STATUS; + disable_hc_int(hsotg, chnum, HCINTMSK_CHHLTD); + chan->hcint = 0; + return; + } + + qtd = list_first_entry(&chan->qh->qtd_list, struct dwc2_qtd, + qtd_list_entry); + + if (!hsotg->params.host_dma) { + if ((hcint & HCINTMSK_CHHLTD) && hcint != HCINTMSK_CHHLTD) + hcint &= ~HCINTMSK_CHHLTD; + } + + if (hcint & HCINTMSK_XFERCOMPL) { + dwc2_hc_xfercomp_intr(hsotg, chan, chnum, qtd); + /* + * If NYET occurred at same time as Xfer Complete, the NYET is + * handled by the Xfer Complete interrupt handler. Don't want + * to call the NYET interrupt handler in this case. + */ + hcint &= ~HCINTMSK_NYET; + } + + if (hcint & HCINTMSK_CHHLTD) { + dwc2_hc_chhltd_intr(hsotg, chan, chnum, qtd); + if (!dwc2_check_qtd_still_ok(qtd, chan->qh)) + goto exit; + } + if (hcint & HCINTMSK_AHBERR) { + dwc2_hc_ahberr_intr(hsotg, chan, chnum, qtd); + if (!dwc2_check_qtd_still_ok(qtd, chan->qh)) + goto exit; + } + if (hcint & HCINTMSK_STALL) { + dwc2_hc_stall_intr(hsotg, chan, chnum, qtd); + if (!dwc2_check_qtd_still_ok(qtd, chan->qh)) + goto exit; + } + if (hcint & HCINTMSK_NAK) { + dwc2_hc_nak_intr(hsotg, chan, chnum, qtd); + if (!dwc2_check_qtd_still_ok(qtd, chan->qh)) + goto exit; + } + if (hcint & HCINTMSK_ACK) { + dwc2_hc_ack_intr(hsotg, chan, chnum, qtd); + if (!dwc2_check_qtd_still_ok(qtd, chan->qh)) + goto exit; + } + if (hcint & HCINTMSK_NYET) { + dwc2_hc_nyet_intr(hsotg, chan, chnum, qtd); + if (!dwc2_check_qtd_still_ok(qtd, chan->qh)) + goto exit; + } + if (hcint & HCINTMSK_XACTERR) { + dwc2_hc_xacterr_intr(hsotg, chan, chnum, qtd); + if (!dwc2_check_qtd_still_ok(qtd, chan->qh)) + goto exit; + } + if (hcint & HCINTMSK_BBLERR) { + dwc2_hc_babble_intr(hsotg, chan, chnum, qtd); + if (!dwc2_check_qtd_still_ok(qtd, chan->qh)) + goto exit; + } + if (hcint & HCINTMSK_FRMOVRUN) { + dwc2_hc_frmovrun_intr(hsotg, chan, chnum, qtd); + if (!dwc2_check_qtd_still_ok(qtd, chan->qh)) + goto exit; + } + if (hcint & HCINTMSK_DATATGLERR) { + dwc2_hc_datatglerr_intr(hsotg, chan, chnum, qtd); + if (!dwc2_check_qtd_still_ok(qtd, chan->qh)) + goto exit; + } + +exit: + chan->hcint = 0; +} + +/* + * This interrupt indicates that one or more host channels has a pending + * interrupt. There are multiple conditions that can cause each host channel + * interrupt. This function determines which conditions have occurred for each + * host channel interrupt and handles them appropriately. + */ +static void dwc2_hc_intr(struct dwc2_hsotg *hsotg) +{ + u32 haint; + int i; + struct dwc2_host_chan *chan, *chan_tmp; + + haint = dwc2_readl(hsotg, HAINT); + if (dbg_perio()) { + dev_vdbg(hsotg->dev, "%s()\n", __func__); + + dev_vdbg(hsotg->dev, "HAINT=%08x\n", haint); + } + + /* + * According to USB 2.0 spec section 11.18.8, a host must + * issue complete-split transactions in a microframe for a + * set of full-/low-speed endpoints in the same relative + * order as the start-splits were issued in a microframe for. + */ + list_for_each_entry_safe(chan, chan_tmp, &hsotg->split_order, + split_order_list_entry) { + int hc_num = chan->hc_num; + + if (haint & (1 << hc_num)) { + dwc2_hc_n_intr(hsotg, hc_num); + haint &= ~(1 << hc_num); + } + } + + for (i = 0; i < hsotg->params.host_channels; i++) { + if (haint & (1 << i)) + dwc2_hc_n_intr(hsotg, i); + } +} + +/* This function handles interrupts for the HCD */ +irqreturn_t dwc2_handle_hcd_intr(struct dwc2_hsotg *hsotg) +{ + u32 gintsts, dbg_gintsts; + irqreturn_t retval = IRQ_HANDLED; + + if (!dwc2_is_controller_alive(hsotg)) { + dev_warn(hsotg->dev, "Controller is dead\n"); + return retval; + } else { + retval = IRQ_NONE; + } + + spin_lock(&hsotg->lock); + + /* Check if HOST Mode */ + if (dwc2_is_host_mode(hsotg)) { + gintsts = dwc2_read_core_intr(hsotg); + if (!gintsts) { + spin_unlock(&hsotg->lock); + return retval; + } + + retval = IRQ_HANDLED; + + dbg_gintsts = gintsts; +#ifndef DEBUG_SOF + dbg_gintsts &= ~GINTSTS_SOF; +#endif + if (!dbg_perio()) + dbg_gintsts &= ~(GINTSTS_HCHINT | GINTSTS_RXFLVL | + GINTSTS_PTXFEMP); + + /* Only print if there are any non-suppressed interrupts left */ + if (dbg_gintsts) + dev_vdbg(hsotg->dev, + "DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x\n", + gintsts); + + if (gintsts & GINTSTS_SOF) + dwc2_sof_intr(hsotg); + if (gintsts & GINTSTS_RXFLVL) + dwc2_rx_fifo_level_intr(hsotg); + if (gintsts & GINTSTS_NPTXFEMP) + dwc2_np_tx_fifo_empty_intr(hsotg); + if (gintsts & GINTSTS_PRTINT) + dwc2_port_intr(hsotg); + if (gintsts & GINTSTS_HCHINT) + dwc2_hc_intr(hsotg); + if (gintsts & GINTSTS_PTXFEMP) + dwc2_perio_tx_fifo_empty_intr(hsotg); + + if (dbg_gintsts) { + dev_vdbg(hsotg->dev, + "DWC OTG HCD Finished Servicing Interrupts\n"); + dev_vdbg(hsotg->dev, + "DWC OTG HCD gintsts=0x%08x gintmsk=0x%08x\n", + dwc2_readl(hsotg, GINTSTS), + dwc2_readl(hsotg, GINTMSK)); + } + } + + spin_unlock(&hsotg->lock); + + return retval; +} diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c new file mode 100644 index 0000000000..0d4495c6b9 --- /dev/null +++ b/drivers/usb/dwc2/hcd_queue.c @@ -0,0 +1,2069 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * hcd_queue.c - DesignWare HS OTG Controller host queuing routines + * + * Copyright (C) 2004-2013 Synopsys, Inc. + */ + +/* + * This file contains the functions to manage Queue Heads and Queue + * Transfer Descriptors for Host mode + */ +#include <linux/gcd.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/usb.h> + +#include <linux/usb/hcd.h> +#include <linux/usb/ch11.h> + +#include "core.h" +#include "hcd.h" + +/* Wait this long before releasing periodic reservation */ +#define DWC2_UNRESERVE_DELAY (msecs_to_jiffies(5)) + +/* If we get a NAK, wait this long before retrying */ +#define DWC2_RETRY_WAIT_DELAY (1 * NSEC_PER_MSEC) + +/** + * dwc2_periodic_channel_available() - Checks that a channel is available for a + * periodic transfer + * + * @hsotg: The HCD state structure for the DWC OTG controller + * + * Return: 0 if successful, negative error code otherwise + */ +static int dwc2_periodic_channel_available(struct dwc2_hsotg *hsotg) +{ + /* + * Currently assuming that there is a dedicated host channel for + * each periodic transaction plus at least one host channel for + * non-periodic transactions + */ + int status; + int num_channels; + + num_channels = hsotg->params.host_channels; + if ((hsotg->periodic_channels + hsotg->non_periodic_channels < + num_channels) && (hsotg->periodic_channels < num_channels - 1)) { + status = 0; + } else { + dev_dbg(hsotg->dev, + "%s: Total channels: %d, Periodic: %d, Non-periodic: %d\n", + __func__, num_channels, + hsotg->periodic_channels, hsotg->non_periodic_channels); + status = -ENOSPC; + } + + return status; +} + +/** + * dwc2_check_periodic_bandwidth() - Checks that there is sufficient bandwidth + * for the specified QH in the periodic schedule + * + * @hsotg: The HCD state structure for the DWC OTG controller + * @qh: QH containing periodic bandwidth required + * + * Return: 0 if successful, negative error code otherwise + * + * For simplicity, this calculation assumes that all the transfers in the + * periodic schedule may occur in the same (micro)frame + */ +static int dwc2_check_periodic_bandwidth(struct dwc2_hsotg *hsotg, + struct dwc2_qh *qh) +{ + int status; + s16 max_claimed_usecs; + + status = 0; + + if (qh->dev_speed == USB_SPEED_HIGH || qh->do_split) { + /* + * High speed mode + * Max periodic usecs is 80% x 125 usec = 100 usec + */ + max_claimed_usecs = 100 - qh->host_us; + } else { + /* + * Full speed mode + * Max periodic usecs is 90% x 1000 usec = 900 usec + */ + max_claimed_usecs = 900 - qh->host_us; + } + + if (hsotg->periodic_usecs > max_claimed_usecs) { + dev_err(hsotg->dev, + "%s: already claimed usecs %d, required usecs %d\n", + __func__, hsotg->periodic_usecs, qh->host_us); + status = -ENOSPC; + } + + return status; +} + +/** + * pmap_schedule() - Schedule time in a periodic bitmap (pmap). + * + * @map: The bitmap representing the schedule; will be updated + * upon success. + * @bits_per_period: The schedule represents several periods. This is how many + * bits are in each period. It's assumed that the beginning + * of the schedule will repeat after its end. + * @periods_in_map: The number of periods in the schedule. + * @num_bits: The number of bits we need per period we want to reserve + * in this function call. + * @interval: How often we need to be scheduled for the reservation this + * time. 1 means every period. 2 means every other period. + * ...you get the picture? + * @start: The bit number to start at. Normally 0. Must be within + * the interval or we return failure right away. + * @only_one_period: Normally we'll allow picking a start anywhere within the + * first interval, since we can still make all repetition + * requirements by doing that. However, if you pass true + * here then we'll return failure if we can't fit within + * the period that "start" is in. + * + * The idea here is that we want to schedule time for repeating events that all + * want the same resource. The resource is divided into fixed-sized periods + * and the events want to repeat every "interval" periods. The schedule + * granularity is one bit. + * + * To keep things "simple", we'll represent our schedule with a bitmap that + * contains a fixed number of periods. This gets rid of a lot of complexity + * but does mean that we need to handle things specially (and non-ideally) if + * the number of the periods in the schedule doesn't match well with the + * intervals that we're trying to schedule. + * + * Here's an explanation of the scheme we'll implement, assuming 8 periods. + * - If interval is 1, we need to take up space in each of the 8 + * periods we're scheduling. Easy. + * - If interval is 2, we need to take up space in half of the + * periods. Again, easy. + * - If interval is 3, we actually need to fall back to interval 1. + * Why? Because we might need time in any period. AKA for the + * first 8 periods, we'll be in slot 0, 3, 6. Then we'll be + * in slot 1, 4, 7. Then we'll be in 2, 5. Then we'll be back to + * 0, 3, and 6. Since we could be in any frame we need to reserve + * for all of them. Sucks, but that's what you gotta do. Note that + * if we were instead scheduling 8 * 3 = 24 we'd do much better, but + * then we need more memory and time to do scheduling. + * - If interval is 4, easy. + * - If interval is 5, we again need interval 1. The schedule will be + * 0, 5, 2, 7, 4, 1, 6, 3, 0 + * - If interval is 6, we need interval 2. 0, 6, 4, 2. + * - If interval is 7, we need interval 1. + * - If interval is 8, we need interval 8. + * + * If you do the math, you'll see that we need to pretend that interval is + * equal to the greatest_common_divisor(interval, periods_in_map). + * + * Note that at the moment this function tends to front-pack the schedule. + * In some cases that's really non-ideal (it's hard to schedule things that + * need to repeat every period). In other cases it's perfect (you can easily + * schedule bigger, less often repeating things). + * + * Here's the algorithm in action (8 periods, 5 bits per period): + * |** | |** | |** | |** | | OK 2 bits, intv 2 at 0 + * |*****| ***|*****| ***|*****| ***|*****| ***| OK 3 bits, intv 3 at 2 + * |*****|* ***|*****| ***|*****|* ***|*****| ***| OK 1 bits, intv 4 at 5 + * |** |* |** | |** |* |** | | Remv 3 bits, intv 3 at 2 + * |*** |* |*** | |*** |* |*** | | OK 1 bits, intv 6 at 2 + * |**** |* * |**** | * |**** |* * |**** | * | OK 1 bits, intv 1 at 3 + * |**** |**** |**** | *** |**** |**** |**** | *** | OK 2 bits, intv 2 at 6 + * |*****|*****|*****| ****|*****|*****|*****| ****| OK 1 bits, intv 1 at 4 + * |*****|*****|*****| ****|*****|*****|*****| ****| FAIL 1 bits, intv 1 + * | ***|*****| ***| ****| ***|*****| ***| ****| Remv 2 bits, intv 2 at 0 + * | ***| ****| ***| ****| ***| ****| ***| ****| Remv 1 bits, intv 4 at 5 + * | **| ****| **| ****| **| ****| **| ****| Remv 1 bits, intv 6 at 2 + * | *| ** *| *| ** *| *| ** *| *| ** *| Remv 1 bits, intv 1 at 3 + * | *| *| *| *| *| *| *| *| Remv 2 bits, intv 2 at 6 + * | | | | | | | | | Remv 1 bits, intv 1 at 4 + * |** | |** | |** | |** | | OK 2 bits, intv 2 at 0 + * |*** | |** | |*** | |** | | OK 1 bits, intv 4 at 2 + * |*****| |** **| |*****| |** **| | OK 2 bits, intv 2 at 3 + * |*****|* |** **| |*****|* |** **| | OK 1 bits, intv 4 at 5 + * |*****|*** |** **| ** |*****|*** |** **| ** | OK 2 bits, intv 2 at 6 + * |*****|*****|** **| ****|*****|*****|** **| ****| OK 2 bits, intv 2 at 8 + * |*****|*****|*****| ****|*****|*****|*****| ****| OK 1 bits, intv 4 at 12 + * + * This function is pretty generic and could be easily abstracted if anything + * needed similar scheduling. + * + * Returns either -ENOSPC or a >= 0 start bit which should be passed to the + * unschedule routine. The map bitmap will be updated on a non-error result. + */ +static int pmap_schedule(unsigned long *map, int bits_per_period, + int periods_in_map, int num_bits, + int interval, int start, bool only_one_period) +{ + int interval_bits; + int to_reserve; + int first_end; + int i; + + if (num_bits > bits_per_period) + return -ENOSPC; + + /* Adjust interval as per description */ + interval = gcd(interval, periods_in_map); + + interval_bits = bits_per_period * interval; + to_reserve = periods_in_map / interval; + + /* If start has gotten us past interval then we can't schedule */ + if (start >= interval_bits) + return -ENOSPC; + + if (only_one_period) + /* Must fit within same period as start; end at begin of next */ + first_end = (start / bits_per_period + 1) * bits_per_period; + else + /* Can fit anywhere in the first interval */ + first_end = interval_bits; + + /* + * We'll try to pick the first repetition, then see if that time + * is free for each of the subsequent repetitions. If it's not + * we'll adjust the start time for the next search of the first + * repetition. + */ + while (start + num_bits <= first_end) { + int end; + + /* Need to stay within this period */ + end = (start / bits_per_period + 1) * bits_per_period; + + /* Look for num_bits us in this microframe starting at start */ + start = bitmap_find_next_zero_area(map, end, start, num_bits, + 0); + + /* + * We should get start >= end if we fail. We might be + * able to check the next microframe depending on the + * interval, so continue on (start already updated). + */ + if (start >= end) { + start = end; + continue; + } + + /* At this point we have a valid point for first one */ + for (i = 1; i < to_reserve; i++) { + int ith_start = start + interval_bits * i; + int ith_end = end + interval_bits * i; + int ret; + + /* Use this as a dumb "check if bits are 0" */ + ret = bitmap_find_next_zero_area( + map, ith_start + num_bits, ith_start, num_bits, + 0); + + /* We got the right place, continue checking */ + if (ret == ith_start) + continue; + + /* Move start up for next time and exit for loop */ + ith_start = bitmap_find_next_zero_area( + map, ith_end, ith_start, num_bits, 0); + if (ith_start >= ith_end) + /* Need a while new period next time */ + start = end; + else + start = ith_start - interval_bits * i; + break; + } + + /* If didn't exit the for loop with a break, we have success */ + if (i == to_reserve) + break; + } + + if (start + num_bits > first_end) + return -ENOSPC; + + for (i = 0; i < to_reserve; i++) { + int ith_start = start + interval_bits * i; + + bitmap_set(map, ith_start, num_bits); + } + + return start; +} + +/** + * pmap_unschedule() - Undo work done by pmap_schedule() + * + * @map: See pmap_schedule(). + * @bits_per_period: See pmap_schedule(). + * @periods_in_map: See pmap_schedule(). + * @num_bits: The number of bits that was passed to schedule. + * @interval: The interval that was passed to schedule. + * @start: The return value from pmap_schedule(). + */ +static void pmap_unschedule(unsigned long *map, int bits_per_period, + int periods_in_map, int num_bits, + int interval, int start) +{ + int interval_bits; + int to_release; + int i; + + /* Adjust interval as per description in pmap_schedule() */ + interval = gcd(interval, periods_in_map); + + interval_bits = bits_per_period * interval; + to_release = periods_in_map / interval; + + for (i = 0; i < to_release; i++) { + int ith_start = start + interval_bits * i; + + bitmap_clear(map, ith_start, num_bits); + } +} + +/** + * dwc2_get_ls_map() - Get the map used for the given qh + * + * @hsotg: The HCD state structure for the DWC OTG controller. + * @qh: QH for the periodic transfer. + * + * We'll always get the periodic map out of our TT. Note that even if we're + * running the host straight in low speed / full speed mode it appears as if + * a TT is allocated for us, so we'll use it. If that ever changes we can + * add logic here to get a map out of "hsotg" if !qh->do_split. + * + * Returns: the map or NULL if a map couldn't be found. + */ +static unsigned long *dwc2_get_ls_map(struct dwc2_hsotg *hsotg, + struct dwc2_qh *qh) +{ + unsigned long *map; + + /* Don't expect to be missing a TT and be doing low speed scheduling */ + if (WARN_ON(!qh->dwc_tt)) + return NULL; + + /* Get the map and adjust if this is a multi_tt hub */ + map = qh->dwc_tt->periodic_bitmaps; + if (qh->dwc_tt->usb_tt->multi) + map += DWC2_ELEMENTS_PER_LS_BITMAP * (qh->ttport - 1); + + return map; +} + +#ifdef DWC2_PRINT_SCHEDULE +/* + * cat_printf() - A printf() + strcat() helper + * + * This is useful for concatenating a bunch of strings where each string is + * constructed using printf. + * + * @buf: The destination buffer; will be updated to point after the printed + * data. + * @size: The number of bytes in the buffer (includes space for '\0'). + * @fmt: The format for printf. + * @...: The args for printf. + */ +static __printf(3, 4) +void cat_printf(char **buf, size_t *size, const char *fmt, ...) +{ + va_list args; + int i; + + if (*size == 0) + return; + + va_start(args, fmt); + i = vsnprintf(*buf, *size, fmt, args); + va_end(args); + + if (i >= *size) { + (*buf)[*size - 1] = '\0'; + *buf += *size; + *size = 0; + } else { + *buf += i; + *size -= i; + } +} + +/* + * pmap_print() - Print the given periodic map + * + * Will attempt to print out the periodic schedule. + * + * @map: See pmap_schedule(). + * @bits_per_period: See pmap_schedule(). + * @periods_in_map: See pmap_schedule(). + * @period_name: The name of 1 period, like "uFrame" + * @units: The name of the units, like "us". + * @print_fn: The function to call for printing. + * @print_data: Opaque data to pass to the print function. + */ +static void pmap_print(unsigned long *map, int bits_per_period, + int periods_in_map, const char *period_name, + const char *units, + void (*print_fn)(const char *str, void *data), + void *print_data) +{ + int period; + + for (period = 0; period < periods_in_map; period++) { + char tmp[64]; + char *buf = tmp; + size_t buf_size = sizeof(tmp); + int period_start = period * bits_per_period; + int period_end = period_start + bits_per_period; + int start = 0; + int count = 0; + bool printed = false; + int i; + + for (i = period_start; i < period_end + 1; i++) { + /* Handle case when ith bit is set */ + if (i < period_end && + bitmap_find_next_zero_area(map, i + 1, + i, 1, 0) != i) { + if (count == 0) + start = i - period_start; + count++; + continue; + } + + /* ith bit isn't set; don't care if count == 0 */ + if (count == 0) + continue; + + if (!printed) + cat_printf(&buf, &buf_size, "%s %d: ", + period_name, period); + else + cat_printf(&buf, &buf_size, ", "); + printed = true; + + cat_printf(&buf, &buf_size, "%d %s -%3d %s", start, + units, start + count - 1, units); + count = 0; + } + + if (printed) + print_fn(tmp, print_data); + } +} + +struct dwc2_qh_print_data { + struct dwc2_hsotg *hsotg; + struct dwc2_qh *qh; +}; + +/** + * dwc2_qh_print() - Helper function for dwc2_qh_schedule_print() + * + * @str: The string to print + * @data: A pointer to a struct dwc2_qh_print_data + */ +static void dwc2_qh_print(const char *str, void *data) +{ + struct dwc2_qh_print_data *print_data = data; + + dwc2_sch_dbg(print_data->hsotg, "QH=%p ...%s\n", print_data->qh, str); +} + +/** + * dwc2_qh_schedule_print() - Print the periodic schedule + * + * @hsotg: The HCD state structure for the DWC OTG controller. + * @qh: QH to print. + */ +static void dwc2_qh_schedule_print(struct dwc2_hsotg *hsotg, + struct dwc2_qh *qh) +{ + struct dwc2_qh_print_data print_data = { hsotg, qh }; + int i; + + /* + * The printing functions are quite slow and inefficient. + * If we don't have tracing turned on, don't run unless the special + * define is turned on. + */ + + if (qh->schedule_low_speed) { + unsigned long *map = dwc2_get_ls_map(hsotg, qh); + + dwc2_sch_dbg(hsotg, "QH=%p LS/FS trans: %d=>%d us @ %d us", + qh, qh->device_us, + DWC2_ROUND_US_TO_SLICE(qh->device_us), + DWC2_US_PER_SLICE * qh->ls_start_schedule_slice); + + if (map) { + dwc2_sch_dbg(hsotg, + "QH=%p Whole low/full speed map %p now:\n", + qh, map); + pmap_print(map, DWC2_LS_PERIODIC_SLICES_PER_FRAME, + DWC2_LS_SCHEDULE_FRAMES, "Frame ", "slices", + dwc2_qh_print, &print_data); + } + } + + for (i = 0; i < qh->num_hs_transfers; i++) { + struct dwc2_hs_transfer_time *trans_time = qh->hs_transfers + i; + int uframe = trans_time->start_schedule_us / + DWC2_HS_PERIODIC_US_PER_UFRAME; + int rel_us = trans_time->start_schedule_us % + DWC2_HS_PERIODIC_US_PER_UFRAME; + + dwc2_sch_dbg(hsotg, + "QH=%p HS trans #%d: %d us @ uFrame %d + %d us\n", + qh, i, trans_time->duration_us, uframe, rel_us); + } + if (qh->num_hs_transfers) { + dwc2_sch_dbg(hsotg, "QH=%p Whole high speed map now:\n", qh); + pmap_print(hsotg->hs_periodic_bitmap, + DWC2_HS_PERIODIC_US_PER_UFRAME, + DWC2_HS_SCHEDULE_UFRAMES, "uFrame", "us", + dwc2_qh_print, &print_data); + } +} +#else +static inline void dwc2_qh_schedule_print(struct dwc2_hsotg *hsotg, + struct dwc2_qh *qh) {}; +#endif + +/** + * dwc2_ls_pmap_schedule() - Schedule a low speed QH + * + * @hsotg: The HCD state structure for the DWC OTG controller. + * @qh: QH for the periodic transfer. + * @search_slice: We'll start trying to schedule at the passed slice. + * Remember that slices are the units of the low speed + * schedule (think 25us or so). + * + * Wraps pmap_schedule() with the right parameters for low speed scheduling. + * + * Normally we schedule low speed devices on the map associated with the TT. + * + * Returns: 0 for success or an error code. + */ +static int dwc2_ls_pmap_schedule(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, + int search_slice) +{ + int slices = DIV_ROUND_UP(qh->device_us, DWC2_US_PER_SLICE); + unsigned long *map = dwc2_get_ls_map(hsotg, qh); + int slice; + + if (!map) + return -EINVAL; + + /* + * Schedule on the proper low speed map with our low speed scheduling + * parameters. Note that we use the "device_interval" here since + * we want the low speed interval and the only way we'd be in this + * function is if the device is low speed. + * + * If we happen to be doing low speed and high speed scheduling for the + * same transaction (AKA we have a split) we always do low speed first. + * That means we can always pass "false" for only_one_period (that + * parameters is only useful when we're trying to get one schedule to + * match what we already planned in the other schedule). + */ + slice = pmap_schedule(map, DWC2_LS_PERIODIC_SLICES_PER_FRAME, + DWC2_LS_SCHEDULE_FRAMES, slices, + qh->device_interval, search_slice, false); + + if (slice < 0) + return slice; + + qh->ls_start_schedule_slice = slice; + return 0; +} + +/** + * dwc2_ls_pmap_unschedule() - Undo work done by dwc2_ls_pmap_schedule() + * + * @hsotg: The HCD state structure for the DWC OTG controller. + * @qh: QH for the periodic transfer. + */ +static void dwc2_ls_pmap_unschedule(struct dwc2_hsotg *hsotg, + struct dwc2_qh *qh) +{ + int slices = DIV_ROUND_UP(qh->device_us, DWC2_US_PER_SLICE); + unsigned long *map = dwc2_get_ls_map(hsotg, qh); + + /* Schedule should have failed, so no worries about no error code */ + if (!map) + return; + + pmap_unschedule(map, DWC2_LS_PERIODIC_SLICES_PER_FRAME, + DWC2_LS_SCHEDULE_FRAMES, slices, qh->device_interval, + qh->ls_start_schedule_slice); +} + +/** + * dwc2_hs_pmap_schedule - Schedule in the main high speed schedule + * + * This will schedule something on the main dwc2 schedule. + * + * We'll start looking in qh->hs_transfers[index].start_schedule_us. We'll + * update this with the result upon success. We also use the duration from + * the same structure. + * + * @hsotg: The HCD state structure for the DWC OTG controller. + * @qh: QH for the periodic transfer. + * @only_one_period: If true we will limit ourselves to just looking at + * one period (aka one 100us chunk). This is used if we have + * already scheduled something on the low speed schedule and + * need to find something that matches on the high speed one. + * @index: The index into qh->hs_transfers that we're working with. + * + * Returns: 0 for success or an error code. Upon success the + * dwc2_hs_transfer_time specified by "index" will be updated. + */ +static int dwc2_hs_pmap_schedule(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, + bool only_one_period, int index) +{ + struct dwc2_hs_transfer_time *trans_time = qh->hs_transfers + index; + int us; + + us = pmap_schedule(hsotg->hs_periodic_bitmap, + DWC2_HS_PERIODIC_US_PER_UFRAME, + DWC2_HS_SCHEDULE_UFRAMES, trans_time->duration_us, + qh->host_interval, trans_time->start_schedule_us, + only_one_period); + + if (us < 0) + return us; + + trans_time->start_schedule_us = us; + return 0; +} + +/** + * dwc2_hs_pmap_unschedule() - Undo work done by dwc2_hs_pmap_schedule() + * + * @hsotg: The HCD state structure for the DWC OTG controller. + * @qh: QH for the periodic transfer. + * @index: Transfer index + */ +static void dwc2_hs_pmap_unschedule(struct dwc2_hsotg *hsotg, + struct dwc2_qh *qh, int index) +{ + struct dwc2_hs_transfer_time *trans_time = qh->hs_transfers + index; + + pmap_unschedule(hsotg->hs_periodic_bitmap, + DWC2_HS_PERIODIC_US_PER_UFRAME, + DWC2_HS_SCHEDULE_UFRAMES, trans_time->duration_us, + qh->host_interval, trans_time->start_schedule_us); +} + +/** + * dwc2_uframe_schedule_split - Schedule a QH for a periodic split xfer. + * + * This is the most complicated thing in USB. We have to find matching time + * in both the global high speed schedule for the port and the low speed + * schedule for the TT associated with the given device. + * + * Being here means that the host must be running in high speed mode and the + * device is in low or full speed mode (and behind a hub). + * + * @hsotg: The HCD state structure for the DWC OTG controller. + * @qh: QH for the periodic transfer. + */ +static int dwc2_uframe_schedule_split(struct dwc2_hsotg *hsotg, + struct dwc2_qh *qh) +{ + int bytecount = qh->maxp_mult * qh->maxp; + int ls_search_slice; + int err = 0; + int host_interval_in_sched; + + /* + * The interval (how often to repeat) in the actual host schedule. + * See pmap_schedule() for gcd() explanation. + */ + host_interval_in_sched = gcd(qh->host_interval, + DWC2_HS_SCHEDULE_UFRAMES); + + /* + * We always try to find space in the low speed schedule first, then + * try to find high speed time that matches. If we don't, we'll bump + * up the place we start searching in the low speed schedule and try + * again. To start we'll look right at the beginning of the low speed + * schedule. + * + * Note that this will tend to front-load the high speed schedule. + * We may eventually want to try to avoid this by either considering + * both schedules together or doing some sort of round robin. + */ + ls_search_slice = 0; + + while (ls_search_slice < DWC2_LS_SCHEDULE_SLICES) { + int start_s_uframe; + int ssplit_s_uframe; + int second_s_uframe; + int rel_uframe; + int first_count; + int middle_count; + int end_count; + int first_data_bytes; + int other_data_bytes; + int i; + + if (qh->schedule_low_speed) { + err = dwc2_ls_pmap_schedule(hsotg, qh, ls_search_slice); + + /* + * If we got an error here there's no other magic we + * can do, so bail. All the looping above is only + * helpful to redo things if we got a low speed slot + * and then couldn't find a matching high speed slot. + */ + if (err) + return err; + } else { + /* Must be missing the tt structure? Why? */ + WARN_ON_ONCE(1); + } + + /* + * This will give us a number 0 - 7 if + * DWC2_LS_SCHEDULE_FRAMES == 1, or 0 - 15 if == 2, or ... + */ + start_s_uframe = qh->ls_start_schedule_slice / + DWC2_SLICES_PER_UFRAME; + + /* Get a number that's always 0 - 7 */ + rel_uframe = (start_s_uframe % 8); + + /* + * If we were going to start in uframe 7 then we would need to + * issue a start split in uframe 6, which spec says is not OK. + * Move on to the next full frame (assuming there is one). + * + * See 11.18.4 Host Split Transaction Scheduling Requirements + * bullet 1. + */ + if (rel_uframe == 7) { + if (qh->schedule_low_speed) + dwc2_ls_pmap_unschedule(hsotg, qh); + ls_search_slice = + (qh->ls_start_schedule_slice / + DWC2_LS_PERIODIC_SLICES_PER_FRAME + 1) * + DWC2_LS_PERIODIC_SLICES_PER_FRAME; + continue; + } + + /* + * For ISOC in: + * - start split (frame -1) + * - complete split w/ data (frame +1) + * - complete split w/ data (frame +2) + * - ... + * - complete split w/ data (frame +num_data_packets) + * - complete split w/ data (frame +num_data_packets+1) + * - complete split w/ data (frame +num_data_packets+2, max 8) + * ...though if frame was "0" then max is 7... + * + * For ISOC out we might need to do: + * - start split w/ data (frame -1) + * - start split w/ data (frame +0) + * - ... + * - start split w/ data (frame +num_data_packets-2) + * + * For INTERRUPT in we might need to do: + * - start split (frame -1) + * - complete split w/ data (frame +1) + * - complete split w/ data (frame +2) + * - complete split w/ data (frame +3, max 8) + * + * For INTERRUPT out we might need to do: + * - start split w/ data (frame -1) + * - complete split (frame +1) + * - complete split (frame +2) + * - complete split (frame +3, max 8) + * + * Start adjusting! + */ + ssplit_s_uframe = (start_s_uframe + + host_interval_in_sched - 1) % + host_interval_in_sched; + if (qh->ep_type == USB_ENDPOINT_XFER_ISOC && !qh->ep_is_in) + second_s_uframe = start_s_uframe; + else + second_s_uframe = start_s_uframe + 1; + + /* First data transfer might not be all 188 bytes. */ + first_data_bytes = 188 - + DIV_ROUND_UP(188 * (qh->ls_start_schedule_slice % + DWC2_SLICES_PER_UFRAME), + DWC2_SLICES_PER_UFRAME); + if (first_data_bytes > bytecount) + first_data_bytes = bytecount; + other_data_bytes = bytecount - first_data_bytes; + + /* + * For now, skip OUT xfers where first xfer is partial + * + * Main dwc2 code assumes: + * - INT transfers never get split in two. + * - ISOC transfers can always transfer 188 bytes the first + * time. + * + * Until that code is fixed, try again if the first transfer + * couldn't transfer everything. + * + * This code can be removed if/when the rest of dwc2 handles + * the above cases. Until it's fixed we just won't be able + * to schedule quite as tightly. + */ + if (!qh->ep_is_in && + (first_data_bytes != min_t(int, 188, bytecount))) { + dwc2_sch_dbg(hsotg, + "QH=%p avoiding broken 1st xfer (%d, %d)\n", + qh, first_data_bytes, bytecount); + if (qh->schedule_low_speed) + dwc2_ls_pmap_unschedule(hsotg, qh); + ls_search_slice = (start_s_uframe + 1) * + DWC2_SLICES_PER_UFRAME; + continue; + } + + /* Start by assuming transfers for the bytes */ + qh->num_hs_transfers = 1 + DIV_ROUND_UP(other_data_bytes, 188); + + /* + * Everything except ISOC OUT has extra transfers. Rules are + * complicated. See 11.18.4 Host Split Transaction Scheduling + * Requirements bullet 3. + */ + if (qh->ep_type == USB_ENDPOINT_XFER_INT) { + if (rel_uframe == 6) + qh->num_hs_transfers += 2; + else + qh->num_hs_transfers += 3; + + if (qh->ep_is_in) { + /* + * First is start split, middle/end is data. + * Allocate full data bytes for all data. + */ + first_count = 4; + middle_count = bytecount; + end_count = bytecount; + } else { + /* + * First is data, middle/end is complete. + * First transfer and second can have data. + * Rest should just have complete split. + */ + first_count = first_data_bytes; + middle_count = max_t(int, 4, other_data_bytes); + end_count = 4; + } + } else { + if (qh->ep_is_in) { + int last; + + /* Account for the start split */ + qh->num_hs_transfers++; + + /* Calculate "L" value from spec */ + last = rel_uframe + qh->num_hs_transfers + 1; + + /* Start with basic case */ + if (last <= 6) + qh->num_hs_transfers += 2; + else + qh->num_hs_transfers += 1; + + /* Adjust downwards */ + if (last >= 6 && rel_uframe == 0) + qh->num_hs_transfers--; + + /* 1st = start; rest can contain data */ + first_count = 4; + middle_count = min_t(int, 188, bytecount); + end_count = middle_count; + } else { + /* All contain data, last might be smaller */ + first_count = first_data_bytes; + middle_count = min_t(int, 188, + other_data_bytes); + end_count = other_data_bytes % 188; + } + } + + /* Assign durations per uFrame */ + qh->hs_transfers[0].duration_us = HS_USECS_ISO(first_count); + for (i = 1; i < qh->num_hs_transfers - 1; i++) + qh->hs_transfers[i].duration_us = + HS_USECS_ISO(middle_count); + if (qh->num_hs_transfers > 1) + qh->hs_transfers[qh->num_hs_transfers - 1].duration_us = + HS_USECS_ISO(end_count); + + /* + * Assign start us. The call below to dwc2_hs_pmap_schedule() + * will start with these numbers but may adjust within the same + * microframe. + */ + qh->hs_transfers[0].start_schedule_us = + ssplit_s_uframe * DWC2_HS_PERIODIC_US_PER_UFRAME; + for (i = 1; i < qh->num_hs_transfers; i++) + qh->hs_transfers[i].start_schedule_us = + ((second_s_uframe + i - 1) % + DWC2_HS_SCHEDULE_UFRAMES) * + DWC2_HS_PERIODIC_US_PER_UFRAME; + + /* Try to schedule with filled in hs_transfers above */ + for (i = 0; i < qh->num_hs_transfers; i++) { + err = dwc2_hs_pmap_schedule(hsotg, qh, true, i); + if (err) + break; + } + + /* If we scheduled all w/out breaking out then we're all good */ + if (i == qh->num_hs_transfers) + break; + + for (; i >= 0; i--) + dwc2_hs_pmap_unschedule(hsotg, qh, i); + + if (qh->schedule_low_speed) + dwc2_ls_pmap_unschedule(hsotg, qh); + + /* Try again starting in the next microframe */ + ls_search_slice = (start_s_uframe + 1) * DWC2_SLICES_PER_UFRAME; + } + + if (ls_search_slice >= DWC2_LS_SCHEDULE_SLICES) + return -ENOSPC; + + return 0; +} + +/** + * dwc2_uframe_schedule_hs - Schedule a QH for a periodic high speed xfer. + * + * Basically this just wraps dwc2_hs_pmap_schedule() to provide a clean + * interface. + * + * @hsotg: The HCD state structure for the DWC OTG controller. + * @qh: QH for the periodic transfer. + */ +static int dwc2_uframe_schedule_hs(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) +{ + /* In non-split host and device time are the same */ + WARN_ON(qh->host_us != qh->device_us); + WARN_ON(qh->host_interval != qh->device_interval); + WARN_ON(qh->num_hs_transfers != 1); + + /* We'll have one transfer; init start to 0 before calling scheduler */ + qh->hs_transfers[0].start_schedule_us = 0; + qh->hs_transfers[0].duration_us = qh->host_us; + + return dwc2_hs_pmap_schedule(hsotg, qh, false, 0); +} + +/** + * dwc2_uframe_schedule_ls - Schedule a QH for a periodic low/full speed xfer. + * + * Basically this just wraps dwc2_ls_pmap_schedule() to provide a clean + * interface. + * + * @hsotg: The HCD state structure for the DWC OTG controller. + * @qh: QH for the periodic transfer. + */ +static int dwc2_uframe_schedule_ls(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) +{ + /* In non-split host and device time are the same */ + WARN_ON(qh->host_us != qh->device_us); + WARN_ON(qh->host_interval != qh->device_interval); + WARN_ON(!qh->schedule_low_speed); + + /* Run on the main low speed schedule (no split = no hub = no TT) */ + return dwc2_ls_pmap_schedule(hsotg, qh, 0); +} + +/** + * dwc2_uframe_schedule - Schedule a QH for a periodic xfer. + * + * Calls one of the 3 sub-function depending on what type of transfer this QH + * is for. Also adds some printing. + * + * @hsotg: The HCD state structure for the DWC OTG controller. + * @qh: QH for the periodic transfer. + */ +static int dwc2_uframe_schedule(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) +{ + int ret; + + if (qh->dev_speed == USB_SPEED_HIGH) + ret = dwc2_uframe_schedule_hs(hsotg, qh); + else if (!qh->do_split) + ret = dwc2_uframe_schedule_ls(hsotg, qh); + else + ret = dwc2_uframe_schedule_split(hsotg, qh); + + if (ret) + dwc2_sch_dbg(hsotg, "QH=%p Failed to schedule %d\n", qh, ret); + else + dwc2_qh_schedule_print(hsotg, qh); + + return ret; +} + +/** + * dwc2_uframe_unschedule - Undoes dwc2_uframe_schedule(). + * + * @hsotg: The HCD state structure for the DWC OTG controller. + * @qh: QH for the periodic transfer. + */ +static void dwc2_uframe_unschedule(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) +{ + int i; + + for (i = 0; i < qh->num_hs_transfers; i++) + dwc2_hs_pmap_unschedule(hsotg, qh, i); + + if (qh->schedule_low_speed) + dwc2_ls_pmap_unschedule(hsotg, qh); + + dwc2_sch_dbg(hsotg, "QH=%p Unscheduled\n", qh); +} + +/** + * dwc2_pick_first_frame() - Choose 1st frame for qh that's already scheduled + * + * Takes a qh that has already been scheduled (which means we know we have the + * bandwdith reserved for us) and set the next_active_frame and the + * start_active_frame. + * + * This is expected to be called on qh's that weren't previously actively + * running. It just picks the next frame that we can fit into without any + * thought about the past. + * + * @hsotg: The HCD state structure for the DWC OTG controller + * @qh: QH for a periodic endpoint + * + */ +static void dwc2_pick_first_frame(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) +{ + u16 frame_number; + u16 earliest_frame; + u16 next_active_frame; + u16 relative_frame; + u16 interval; + + /* + * Use the real frame number rather than the cached value as of the + * last SOF to give us a little extra slop. + */ + frame_number = dwc2_hcd_get_frame_number(hsotg); + + /* + * We wouldn't want to start any earlier than the next frame just in + * case the frame number ticks as we're doing this calculation. + * + * NOTE: if we could quantify how long till we actually get scheduled + * we might be able to avoid the "+ 1" by looking at the upper part of + * HFNUM (the FRREM field). For now we'll just use the + 1 though. + */ + earliest_frame = dwc2_frame_num_inc(frame_number, 1); + next_active_frame = earliest_frame; + + /* Get the "no microframe scheduler" out of the way... */ + if (!hsotg->params.uframe_sched) { + if (qh->do_split) + /* Splits are active at microframe 0 minus 1 */ + next_active_frame |= 0x7; + goto exit; + } + + if (qh->dev_speed == USB_SPEED_HIGH || qh->do_split) { + /* + * We're either at high speed or we're doing a split (which + * means we're talking high speed to a hub). In any case + * the first frame should be based on when the first scheduled + * event is. + */ + WARN_ON(qh->num_hs_transfers < 1); + + relative_frame = qh->hs_transfers[0].start_schedule_us / + DWC2_HS_PERIODIC_US_PER_UFRAME; + + /* Adjust interval as per high speed schedule */ + interval = gcd(qh->host_interval, DWC2_HS_SCHEDULE_UFRAMES); + + } else { + /* + * Low or full speed directly on dwc2. Just about the same + * as high speed but on a different schedule and with slightly + * different adjustments. Note that this works because when + * the host and device are both low speed then frames in the + * controller tick at low speed. + */ + relative_frame = qh->ls_start_schedule_slice / + DWC2_LS_PERIODIC_SLICES_PER_FRAME; + interval = gcd(qh->host_interval, DWC2_LS_SCHEDULE_FRAMES); + } + + /* Scheduler messed up if frame is past interval */ + WARN_ON(relative_frame >= interval); + + /* + * We know interval must divide (HFNUM_MAX_FRNUM + 1) now that we've + * done the gcd(), so it's safe to move to the beginning of the current + * interval like this. + * + * After this we might be before earliest_frame, but don't worry, + * we'll fix it... + */ + next_active_frame = (next_active_frame / interval) * interval; + + /* + * Actually choose to start at the frame number we've been + * scheduled for. + */ + next_active_frame = dwc2_frame_num_inc(next_active_frame, + relative_frame); + + /* + * We actually need 1 frame before since the next_active_frame is + * the frame number we'll be put on the ready list and we won't be on + * the bus until 1 frame later. + */ + next_active_frame = dwc2_frame_num_dec(next_active_frame, 1); + + /* + * By now we might actually be before the earliest_frame. Let's move + * up intervals until we're not. + */ + while (dwc2_frame_num_gt(earliest_frame, next_active_frame)) + next_active_frame = dwc2_frame_num_inc(next_active_frame, + interval); + +exit: + qh->next_active_frame = next_active_frame; + qh->start_active_frame = next_active_frame; + + dwc2_sch_vdbg(hsotg, "QH=%p First fn=%04x nxt=%04x\n", + qh, frame_number, qh->next_active_frame); +} + +/** + * dwc2_do_reserve() - Make a periodic reservation + * + * Try to allocate space in the periodic schedule. Depending on parameters + * this might use the microframe scheduler or the dumb scheduler. + * + * @hsotg: The HCD state structure for the DWC OTG controller + * @qh: QH for the periodic transfer. + * + * Returns: 0 upon success; error upon failure. + */ +static int dwc2_do_reserve(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) +{ + int status; + + if (hsotg->params.uframe_sched) { + status = dwc2_uframe_schedule(hsotg, qh); + } else { + status = dwc2_periodic_channel_available(hsotg); + if (status) { + dev_info(hsotg->dev, + "%s: No host channel available for periodic transfer\n", + __func__); + return status; + } + + status = dwc2_check_periodic_bandwidth(hsotg, qh); + } + + if (status) { + dev_dbg(hsotg->dev, + "%s: Insufficient periodic bandwidth for periodic transfer\n", + __func__); + return status; + } + + if (!hsotg->params.uframe_sched) + /* Reserve periodic channel */ + hsotg->periodic_channels++; + + /* Update claimed usecs per (micro)frame */ + hsotg->periodic_usecs += qh->host_us; + + dwc2_pick_first_frame(hsotg, qh); + + return 0; +} + +/** + * dwc2_do_unreserve() - Actually release the periodic reservation + * + * This function actually releases the periodic bandwidth that was reserved + * by the given qh. + * + * @hsotg: The HCD state structure for the DWC OTG controller + * @qh: QH for the periodic transfer. + */ +static void dwc2_do_unreserve(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) +{ + assert_spin_locked(&hsotg->lock); + + WARN_ON(!qh->unreserve_pending); + + /* No more unreserve pending--we're doing it */ + qh->unreserve_pending = false; + + if (WARN_ON(!list_empty(&qh->qh_list_entry))) + list_del_init(&qh->qh_list_entry); + + /* Update claimed usecs per (micro)frame */ + hsotg->periodic_usecs -= qh->host_us; + + if (hsotg->params.uframe_sched) { + dwc2_uframe_unschedule(hsotg, qh); + } else { + /* Release periodic channel reservation */ + hsotg->periodic_channels--; + } +} + +/** + * dwc2_unreserve_timer_fn() - Timer function to release periodic reservation + * + * According to the kernel doc for usb_submit_urb() (specifically the part about + * "Reserved Bandwidth Transfers"), we need to keep a reservation active as + * long as a device driver keeps submitting. Since we're using HCD_BH to give + * back the URB we need to give the driver a little bit of time before we + * release the reservation. This worker is called after the appropriate + * delay. + * + * @t: Address to a qh unreserve_work. + */ +static void dwc2_unreserve_timer_fn(struct timer_list *t) +{ + struct dwc2_qh *qh = from_timer(qh, t, unreserve_timer); + struct dwc2_hsotg *hsotg = qh->hsotg; + unsigned long flags; + + /* + * Wait for the lock, or for us to be scheduled again. We + * could be scheduled again if: + * - We started executing but didn't get the lock yet. + * - A new reservation came in, but cancel didn't take effect + * because we already started executing. + * - The timer has been kicked again. + * In that case cancel and wait for the next call. + */ + while (!spin_trylock_irqsave(&hsotg->lock, flags)) { + if (timer_pending(&qh->unreserve_timer)) + return; + } + + /* + * Might be no more unreserve pending if: + * - We started executing but didn't get the lock yet. + * - A new reservation came in, but cancel didn't take effect + * because we already started executing. + * + * We can't put this in the loop above because unreserve_pending needs + * to be accessed under lock, so we can only check it once we got the + * lock. + */ + if (qh->unreserve_pending) + dwc2_do_unreserve(hsotg, qh); + + spin_unlock_irqrestore(&hsotg->lock, flags); +} + +/** + * dwc2_check_max_xfer_size() - Checks that the max transfer size allowed in a + * host channel is large enough to handle the maximum data transfer in a single + * (micro)frame for a periodic transfer + * + * @hsotg: The HCD state structure for the DWC OTG controller + * @qh: QH for a periodic endpoint + * + * Return: 0 if successful, negative error code otherwise + */ +static int dwc2_check_max_xfer_size(struct dwc2_hsotg *hsotg, + struct dwc2_qh *qh) +{ + u32 max_xfer_size; + u32 max_channel_xfer_size; + int status = 0; + + max_xfer_size = qh->maxp * qh->maxp_mult; + max_channel_xfer_size = hsotg->params.max_transfer_size; + + if (max_xfer_size > max_channel_xfer_size) { + dev_err(hsotg->dev, + "%s: Periodic xfer length %d > max xfer length for channel %d\n", + __func__, max_xfer_size, max_channel_xfer_size); + status = -ENOSPC; + } + + return status; +} + +/** + * dwc2_schedule_periodic() - Schedules an interrupt or isochronous transfer in + * the periodic schedule + * + * @hsotg: The HCD state structure for the DWC OTG controller + * @qh: QH for the periodic transfer. The QH should already contain the + * scheduling information. + * + * Return: 0 if successful, negative error code otherwise + */ +static int dwc2_schedule_periodic(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) +{ + int status; + + status = dwc2_check_max_xfer_size(hsotg, qh); + if (status) { + dev_dbg(hsotg->dev, + "%s: Channel max transfer size too small for periodic transfer\n", + __func__); + return status; + } + + /* Cancel pending unreserve; if canceled OK, unreserve was pending */ + if (del_timer(&qh->unreserve_timer)) + WARN_ON(!qh->unreserve_pending); + + /* + * Only need to reserve if there's not an unreserve pending, since if an + * unreserve is pending then by definition our old reservation is still + * valid. Unreserve might still be pending even if we didn't cancel if + * dwc2_unreserve_timer_fn() already started. Code in the timer handles + * that case. + */ + if (!qh->unreserve_pending) { + status = dwc2_do_reserve(hsotg, qh); + if (status) + return status; + } else { + /* + * It might have been a while, so make sure that frame_number + * is still good. Note: we could also try to use the similar + * dwc2_next_periodic_start() but that schedules much more + * tightly and we might need to hurry and queue things up. + */ + if (dwc2_frame_num_le(qh->next_active_frame, + hsotg->frame_number)) + dwc2_pick_first_frame(hsotg, qh); + } + + qh->unreserve_pending = 0; + + if (hsotg->params.dma_desc_enable) + /* Don't rely on SOF and start in ready schedule */ + list_add_tail(&qh->qh_list_entry, &hsotg->periodic_sched_ready); + else + /* Always start in inactive schedule */ + list_add_tail(&qh->qh_list_entry, + &hsotg->periodic_sched_inactive); + + return 0; +} + +/** + * dwc2_deschedule_periodic() - Removes an interrupt or isochronous transfer + * from the periodic schedule + * + * @hsotg: The HCD state structure for the DWC OTG controller + * @qh: QH for the periodic transfer + */ +static void dwc2_deschedule_periodic(struct dwc2_hsotg *hsotg, + struct dwc2_qh *qh) +{ + bool did_modify; + + assert_spin_locked(&hsotg->lock); + + /* + * Schedule the unreserve to happen in a little bit. Cases here: + * - Unreserve worker might be sitting there waiting to grab the lock. + * In this case it will notice it's been schedule again and will + * quit. + * - Unreserve worker might not be scheduled. + * + * We should never already be scheduled since dwc2_schedule_periodic() + * should have canceled the scheduled unreserve timer (hence the + * warning on did_modify). + * + * We add + 1 to the timer to guarantee that at least 1 jiffy has + * passed (otherwise if the jiffy counter might tick right after we + * read it and we'll get no delay). + */ + did_modify = mod_timer(&qh->unreserve_timer, + jiffies + DWC2_UNRESERVE_DELAY + 1); + WARN_ON(did_modify); + qh->unreserve_pending = 1; + + list_del_init(&qh->qh_list_entry); +} + +/** + * dwc2_wait_timer_fn() - Timer function to re-queue after waiting + * + * As per the spec, a NAK indicates that "a function is temporarily unable to + * transmit or receive data, but will eventually be able to do so without need + * of host intervention". + * + * That means that when we encounter a NAK we're supposed to retry. + * + * ...but if we retry right away (from the interrupt handler that saw the NAK) + * then we can end up with an interrupt storm (if the other side keeps NAKing + * us) because on slow enough CPUs it could take us longer to get out of the + * interrupt routine than it takes for the device to send another NAK. That + * leads to a constant stream of NAK interrupts and the CPU locks. + * + * ...so instead of retrying right away in the case of a NAK we'll set a timer + * to retry some time later. This function handles that timer and moves the + * qh back to the "inactive" list, then queues transactions. + * + * @t: Pointer to wait_timer in a qh. + * + * Return: HRTIMER_NORESTART to not automatically restart this timer. + */ +static enum hrtimer_restart dwc2_wait_timer_fn(struct hrtimer *t) +{ + struct dwc2_qh *qh = container_of(t, struct dwc2_qh, wait_timer); + struct dwc2_hsotg *hsotg = qh->hsotg; + unsigned long flags; + + spin_lock_irqsave(&hsotg->lock, flags); + + /* + * We'll set wait_timer_cancel to true if we want to cancel this + * operation in dwc2_hcd_qh_unlink(). + */ + if (!qh->wait_timer_cancel) { + enum dwc2_transaction_type tr_type; + + qh->want_wait = false; + + list_move(&qh->qh_list_entry, + &hsotg->non_periodic_sched_inactive); + + tr_type = dwc2_hcd_select_transactions(hsotg); + if (tr_type != DWC2_TRANSACTION_NONE) + dwc2_hcd_queue_transactions(hsotg, tr_type); + } + + spin_unlock_irqrestore(&hsotg->lock, flags); + return HRTIMER_NORESTART; +} + +/** + * dwc2_qh_init() - Initializes a QH structure + * + * @hsotg: The HCD state structure for the DWC OTG controller + * @qh: The QH to init + * @urb: Holds the information about the device/endpoint needed to initialize + * the QH + * @mem_flags: Flags for allocating memory. + */ +static void dwc2_qh_init(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, + struct dwc2_hcd_urb *urb, gfp_t mem_flags) +{ + int dev_speed = dwc2_host_get_speed(hsotg, urb->priv); + u8 ep_type = dwc2_hcd_get_pipe_type(&urb->pipe_info); + bool ep_is_in = !!dwc2_hcd_is_pipe_in(&urb->pipe_info); + bool ep_is_isoc = (ep_type == USB_ENDPOINT_XFER_ISOC); + bool ep_is_int = (ep_type == USB_ENDPOINT_XFER_INT); + u32 hprt = dwc2_readl(hsotg, HPRT0); + u32 prtspd = (hprt & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT; + bool do_split = (prtspd == HPRT0_SPD_HIGH_SPEED && + dev_speed != USB_SPEED_HIGH); + int maxp = dwc2_hcd_get_maxp(&urb->pipe_info); + int maxp_mult = dwc2_hcd_get_maxp_mult(&urb->pipe_info); + int bytecount = maxp_mult * maxp; + char *speed, *type; + + /* Initialize QH */ + qh->hsotg = hsotg; + timer_setup(&qh->unreserve_timer, dwc2_unreserve_timer_fn, 0); + hrtimer_init(&qh->wait_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + qh->wait_timer.function = &dwc2_wait_timer_fn; + qh->ep_type = ep_type; + qh->ep_is_in = ep_is_in; + + qh->data_toggle = DWC2_HC_PID_DATA0; + qh->maxp = maxp; + qh->maxp_mult = maxp_mult; + INIT_LIST_HEAD(&qh->qtd_list); + INIT_LIST_HEAD(&qh->qh_list_entry); + + qh->do_split = do_split; + qh->dev_speed = dev_speed; + + if (ep_is_int || ep_is_isoc) { + /* Compute scheduling parameters once and save them */ + int host_speed = do_split ? USB_SPEED_HIGH : dev_speed; + struct dwc2_tt *dwc_tt = dwc2_host_get_tt_info(hsotg, urb->priv, + mem_flags, + &qh->ttport); + int device_ns; + + qh->dwc_tt = dwc_tt; + + qh->host_us = NS_TO_US(usb_calc_bus_time(host_speed, ep_is_in, + ep_is_isoc, bytecount)); + device_ns = usb_calc_bus_time(dev_speed, ep_is_in, + ep_is_isoc, bytecount); + + if (do_split && dwc_tt) + device_ns += dwc_tt->usb_tt->think_time; + qh->device_us = NS_TO_US(device_ns); + + qh->device_interval = urb->interval; + qh->host_interval = urb->interval * (do_split ? 8 : 1); + + /* + * Schedule low speed if we're running the host in low or + * full speed OR if we've got a "TT" to deal with to access this + * device. + */ + qh->schedule_low_speed = prtspd != HPRT0_SPD_HIGH_SPEED || + dwc_tt; + + if (do_split) { + /* We won't know num transfers until we schedule */ + qh->num_hs_transfers = -1; + } else if (dev_speed == USB_SPEED_HIGH) { + qh->num_hs_transfers = 1; + } else { + qh->num_hs_transfers = 0; + } + + /* We'll schedule later when we have something to do */ + } + + switch (dev_speed) { + case USB_SPEED_LOW: + speed = "low"; + break; + case USB_SPEED_FULL: + speed = "full"; + break; + case USB_SPEED_HIGH: + speed = "high"; + break; + default: + speed = "?"; + break; + } + + switch (qh->ep_type) { + case USB_ENDPOINT_XFER_ISOC: + type = "isochronous"; + break; + case USB_ENDPOINT_XFER_INT: + type = "interrupt"; + break; + case USB_ENDPOINT_XFER_CONTROL: + type = "control"; + break; + case USB_ENDPOINT_XFER_BULK: + type = "bulk"; + break; + default: + type = "?"; + break; + } + + dwc2_sch_dbg(hsotg, "QH=%p Init %s, %s speed, %d bytes:\n", qh, type, + speed, bytecount); + dwc2_sch_dbg(hsotg, "QH=%p ...addr=%d, ep=%d, %s\n", qh, + dwc2_hcd_get_dev_addr(&urb->pipe_info), + dwc2_hcd_get_ep_num(&urb->pipe_info), + ep_is_in ? "IN" : "OUT"); + if (ep_is_int || ep_is_isoc) { + dwc2_sch_dbg(hsotg, + "QH=%p ...duration: host=%d us, device=%d us\n", + qh, qh->host_us, qh->device_us); + dwc2_sch_dbg(hsotg, "QH=%p ...interval: host=%d, device=%d\n", + qh, qh->host_interval, qh->device_interval); + if (qh->schedule_low_speed) + dwc2_sch_dbg(hsotg, "QH=%p ...low speed schedule=%p\n", + qh, dwc2_get_ls_map(hsotg, qh)); + } +} + +/** + * dwc2_hcd_qh_create() - Allocates and initializes a QH + * + * @hsotg: The HCD state structure for the DWC OTG controller + * @urb: Holds the information about the device/endpoint needed + * to initialize the QH + * @mem_flags: Flags for allocating memory. + * + * Return: Pointer to the newly allocated QH, or NULL on error + */ +struct dwc2_qh *dwc2_hcd_qh_create(struct dwc2_hsotg *hsotg, + struct dwc2_hcd_urb *urb, + gfp_t mem_flags) +{ + struct dwc2_qh *qh; + + if (!urb->priv) + return NULL; + + /* Allocate memory */ + qh = kzalloc(sizeof(*qh), mem_flags); + if (!qh) + return NULL; + + dwc2_qh_init(hsotg, qh, urb, mem_flags); + + if (hsotg->params.dma_desc_enable && + dwc2_hcd_qh_init_ddma(hsotg, qh, mem_flags) < 0) { + dwc2_hcd_qh_free(hsotg, qh); + return NULL; + } + + return qh; +} + +/** + * dwc2_hcd_qh_free() - Frees the QH + * + * @hsotg: HCD instance + * @qh: The QH to free + * + * QH should already be removed from the list. QTD list should already be empty + * if called from URB Dequeue. + * + * Must NOT be called with interrupt disabled or spinlock held + */ +void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) +{ + /* Make sure any unreserve work is finished. */ + if (del_timer_sync(&qh->unreserve_timer)) { + unsigned long flags; + + spin_lock_irqsave(&hsotg->lock, flags); + dwc2_do_unreserve(hsotg, qh); + spin_unlock_irqrestore(&hsotg->lock, flags); + } + + /* + * We don't have the lock so we can safely wait until the wait timer + * finishes. Of course, at this point in time we'd better have set + * wait_timer_active to false so if this timer was still pending it + * won't do anything anyway, but we want it to finish before we free + * memory. + */ + hrtimer_cancel(&qh->wait_timer); + + dwc2_host_put_tt_info(hsotg, qh->dwc_tt); + + if (qh->desc_list) + dwc2_hcd_qh_free_ddma(hsotg, qh); + else if (hsotg->unaligned_cache && qh->dw_align_buf) + kmem_cache_free(hsotg->unaligned_cache, qh->dw_align_buf); + + kfree(qh); +} + +/** + * dwc2_hcd_qh_add() - Adds a QH to either the non periodic or periodic + * schedule if it is not already in the schedule. If the QH is already in + * the schedule, no action is taken. + * + * @hsotg: The HCD state structure for the DWC OTG controller + * @qh: The QH to add + * + * Return: 0 if successful, negative error code otherwise + */ +int dwc2_hcd_qh_add(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) +{ + int status; + u32 intr_mask; + ktime_t delay; + + if (dbg_qh(qh)) + dev_vdbg(hsotg->dev, "%s()\n", __func__); + + if (!list_empty(&qh->qh_list_entry)) + /* QH already in a schedule */ + return 0; + + /* Add the new QH to the appropriate schedule */ + if (dwc2_qh_is_non_per(qh)) { + /* Schedule right away */ + qh->start_active_frame = hsotg->frame_number; + qh->next_active_frame = qh->start_active_frame; + + if (qh->want_wait) { + list_add_tail(&qh->qh_list_entry, + &hsotg->non_periodic_sched_waiting); + qh->wait_timer_cancel = false; + delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY); + hrtimer_start(&qh->wait_timer, delay, HRTIMER_MODE_REL); + } else { + list_add_tail(&qh->qh_list_entry, + &hsotg->non_periodic_sched_inactive); + } + return 0; + } + + status = dwc2_schedule_periodic(hsotg, qh); + if (status) + return status; + if (!hsotg->periodic_qh_count) { + intr_mask = dwc2_readl(hsotg, GINTMSK); + intr_mask |= GINTSTS_SOF; + dwc2_writel(hsotg, intr_mask, GINTMSK); + } + hsotg->periodic_qh_count++; + + return 0; +} + +/** + * dwc2_hcd_qh_unlink() - Removes a QH from either the non-periodic or periodic + * schedule. Memory is not freed. + * + * @hsotg: The HCD state structure + * @qh: QH to remove from schedule + */ +void dwc2_hcd_qh_unlink(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) +{ + u32 intr_mask; + + dev_vdbg(hsotg->dev, "%s()\n", __func__); + + /* If the wait_timer is pending, this will stop it from acting */ + qh->wait_timer_cancel = true; + + if (list_empty(&qh->qh_list_entry)) + /* QH is not in a schedule */ + return; + + if (dwc2_qh_is_non_per(qh)) { + if (hsotg->non_periodic_qh_ptr == &qh->qh_list_entry) + hsotg->non_periodic_qh_ptr = + hsotg->non_periodic_qh_ptr->next; + list_del_init(&qh->qh_list_entry); + return; + } + + dwc2_deschedule_periodic(hsotg, qh); + hsotg->periodic_qh_count--; + if (!hsotg->periodic_qh_count && + !hsotg->params.dma_desc_enable) { + intr_mask = dwc2_readl(hsotg, GINTMSK); + intr_mask &= ~GINTSTS_SOF; + dwc2_writel(hsotg, intr_mask, GINTMSK); + } +} + +/** + * dwc2_next_for_periodic_split() - Set next_active_frame midway thru a split. + * + * This is called for setting next_active_frame for periodic splits for all but + * the first packet of the split. Confusing? I thought so... + * + * Periodic splits are single low/full speed transfers that we end up splitting + * up into several high speed transfers. They always fit into one full (1 ms) + * frame but might be split over several microframes (125 us each). We to put + * each of the parts on a very specific high speed frame. + * + * This function figures out where the next active uFrame needs to be. + * + * @hsotg: The HCD state structure + * @qh: QH for the periodic transfer. + * @frame_number: The current frame number. + * + * Return: number missed by (or 0 if we didn't miss). + */ +static int dwc2_next_for_periodic_split(struct dwc2_hsotg *hsotg, + struct dwc2_qh *qh, u16 frame_number) +{ + u16 old_frame = qh->next_active_frame; + u16 prev_frame_number = dwc2_frame_num_dec(frame_number, 1); + int missed = 0; + u16 incr; + + /* + * See dwc2_uframe_schedule_split() for split scheduling. + * + * Basically: increment 1 normally, but 2 right after the start split + * (except for ISOC out). + */ + if (old_frame == qh->start_active_frame && + !(qh->ep_type == USB_ENDPOINT_XFER_ISOC && !qh->ep_is_in)) + incr = 2; + else + incr = 1; + + qh->next_active_frame = dwc2_frame_num_inc(old_frame, incr); + + /* + * Note that it's OK for frame_number to be 1 frame past + * next_active_frame. Remember that next_active_frame is supposed to + * be 1 frame _before_ when we want to be scheduled. If we're 1 frame + * past it just means schedule ASAP. + * + * It's _not_ OK, however, if we're more than one frame past. + */ + if (dwc2_frame_num_gt(prev_frame_number, qh->next_active_frame)) { + /* + * OOPS, we missed. That's actually pretty bad since + * the hub will be unhappy; try ASAP I guess. + */ + missed = dwc2_frame_num_dec(prev_frame_number, + qh->next_active_frame); + qh->next_active_frame = frame_number; + } + + return missed; +} + +/** + * dwc2_next_periodic_start() - Set next_active_frame for next transfer start + * + * This is called for setting next_active_frame for a periodic transfer for + * all cases other than midway through a periodic split. This will also update + * start_active_frame. + * + * Since we _always_ keep start_active_frame as the start of the previous + * transfer this is normally pretty easy: we just add our interval to + * start_active_frame and we've got our answer. + * + * The tricks come into play if we miss. In that case we'll look for the next + * slot we can fit into. + * + * @hsotg: The HCD state structure + * @qh: QH for the periodic transfer. + * @frame_number: The current frame number. + * + * Return: number missed by (or 0 if we didn't miss). + */ +static int dwc2_next_periodic_start(struct dwc2_hsotg *hsotg, + struct dwc2_qh *qh, u16 frame_number) +{ + int missed = 0; + u16 interval = qh->host_interval; + u16 prev_frame_number = dwc2_frame_num_dec(frame_number, 1); + + qh->start_active_frame = dwc2_frame_num_inc(qh->start_active_frame, + interval); + + /* + * The dwc2_frame_num_gt() function used below won't work terribly well + * with if we just incremented by a really large intervals since the + * frame counter only goes to 0x3fff. It's terribly unlikely that we + * will have missed in this case anyway. Just go to exit. If we want + * to try to do better we'll need to keep track of a bigger counter + * somewhere in the driver and handle overflows. + */ + if (interval >= 0x1000) + goto exit; + + /* + * Test for misses, which is when it's too late to schedule. + * + * A few things to note: + * - We compare against prev_frame_number since start_active_frame + * and next_active_frame are always 1 frame before we want things + * to be active and we assume we can still get scheduled in the + * current frame number. + * - It's possible for start_active_frame (now incremented) to be + * next_active_frame if we got an EO MISS (even_odd miss) which + * basically means that we detected there wasn't enough time for + * the last packet and dwc2_hc_set_even_odd_frame() rescheduled us + * at the last second. We want to make sure we don't schedule + * another transfer for the same frame. My test webcam doesn't seem + * terribly upset by missing a transfer but really doesn't like when + * we do two transfers in the same frame. + * - Some misses are expected. Specifically, in order to work + * perfectly dwc2 really needs quite spectacular interrupt latency + * requirements. It needs to be able to handle its interrupts + * completely within 125 us of them being asserted. That not only + * means that the dwc2 interrupt handler needs to be fast but it + * means that nothing else in the system has to block dwc2 for a long + * time. We can help with the dwc2 parts of this, but it's hard to + * guarantee that a system will have interrupt latency < 125 us, so + * we have to be robust to some misses. + */ + if (qh->start_active_frame == qh->next_active_frame || + dwc2_frame_num_gt(prev_frame_number, qh->start_active_frame)) { + u16 ideal_start = qh->start_active_frame; + int periods_in_map; + + /* + * Adjust interval as per gcd with map size. + * See pmap_schedule() for more details here. + */ + if (qh->do_split || qh->dev_speed == USB_SPEED_HIGH) + periods_in_map = DWC2_HS_SCHEDULE_UFRAMES; + else + periods_in_map = DWC2_LS_SCHEDULE_FRAMES; + interval = gcd(interval, periods_in_map); + + do { + qh->start_active_frame = dwc2_frame_num_inc( + qh->start_active_frame, interval); + } while (dwc2_frame_num_gt(prev_frame_number, + qh->start_active_frame)); + + missed = dwc2_frame_num_dec(qh->start_active_frame, + ideal_start); + } + +exit: + qh->next_active_frame = qh->start_active_frame; + + return missed; +} + +/* + * Deactivates a QH. For non-periodic QHs, removes the QH from the active + * non-periodic schedule. The QH is added to the inactive non-periodic + * schedule if any QTDs are still attached to the QH. + * + * For periodic QHs, the QH is removed from the periodic queued schedule. If + * there are any QTDs still attached to the QH, the QH is added to either the + * periodic inactive schedule or the periodic ready schedule and its next + * scheduled frame is calculated. The QH is placed in the ready schedule if + * the scheduled frame has been reached already. Otherwise it's placed in the + * inactive schedule. If there are no QTDs attached to the QH, the QH is + * completely removed from the periodic schedule. + */ +void dwc2_hcd_qh_deactivate(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, + int sched_next_periodic_split) +{ + u16 old_frame = qh->next_active_frame; + u16 frame_number; + int missed; + + if (dbg_qh(qh)) + dev_vdbg(hsotg->dev, "%s()\n", __func__); + + if (dwc2_qh_is_non_per(qh)) { + dwc2_hcd_qh_unlink(hsotg, qh); + if (!list_empty(&qh->qtd_list)) + /* Add back to inactive/waiting non-periodic schedule */ + dwc2_hcd_qh_add(hsotg, qh); + return; + } + + /* + * Use the real frame number rather than the cached value as of the + * last SOF just to get us a little closer to reality. Note that + * means we don't actually know if we've already handled the SOF + * interrupt for this frame. + */ + frame_number = dwc2_hcd_get_frame_number(hsotg); + + if (sched_next_periodic_split) + missed = dwc2_next_for_periodic_split(hsotg, qh, frame_number); + else + missed = dwc2_next_periodic_start(hsotg, qh, frame_number); + + dwc2_sch_vdbg(hsotg, + "QH=%p next(%d) fn=%04x, sch=%04x=>%04x (%+d) miss=%d %s\n", + qh, sched_next_periodic_split, frame_number, old_frame, + qh->next_active_frame, + dwc2_frame_num_dec(qh->next_active_frame, old_frame), + missed, missed ? "MISS" : ""); + + if (list_empty(&qh->qtd_list)) { + dwc2_hcd_qh_unlink(hsotg, qh); + return; + } + + /* + * Remove from periodic_sched_queued and move to + * appropriate queue + * + * Note: we purposely use the frame_number from the "hsotg" structure + * since we know SOF interrupt will handle future frames. + */ + if (dwc2_frame_num_le(qh->next_active_frame, hsotg->frame_number)) + list_move_tail(&qh->qh_list_entry, + &hsotg->periodic_sched_ready); + else + list_move_tail(&qh->qh_list_entry, + &hsotg->periodic_sched_inactive); +} + +/** + * dwc2_hcd_qtd_init() - Initializes a QTD structure + * + * @qtd: The QTD to initialize + * @urb: The associated URB + */ +void dwc2_hcd_qtd_init(struct dwc2_qtd *qtd, struct dwc2_hcd_urb *urb) +{ + qtd->urb = urb; + if (dwc2_hcd_get_pipe_type(&urb->pipe_info) == + USB_ENDPOINT_XFER_CONTROL) { + /* + * The only time the QTD data toggle is used is on the data + * phase of control transfers. This phase always starts with + * DATA1. + */ + qtd->data_toggle = DWC2_HC_PID_DATA1; + qtd->control_phase = DWC2_CONTROL_SETUP; + } + + /* Start split */ + qtd->complete_split = 0; + qtd->isoc_split_pos = DWC2_HCSPLT_XACTPOS_ALL; + qtd->isoc_split_offset = 0; + qtd->in_process = 0; + + /* Store the qtd ptr in the urb to reference the QTD */ + urb->qtd = qtd; +} + +/** + * dwc2_hcd_qtd_add() - Adds a QTD to the QTD-list of a QH + * Caller must hold driver lock. + * + * @hsotg: The DWC HCD structure + * @qtd: The QTD to add + * @qh: Queue head to add qtd to + * + * Return: 0 if successful, negative error code otherwise + * + * If the QH to which the QTD is added is not currently scheduled, it is placed + * into the proper schedule based on its EP type. + */ +int dwc2_hcd_qtd_add(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd, + struct dwc2_qh *qh) +{ + int retval; + + if (unlikely(!qh)) { + dev_err(hsotg->dev, "%s: Invalid QH\n", __func__); + retval = -EINVAL; + goto fail; + } + + retval = dwc2_hcd_qh_add(hsotg, qh); + if (retval) + goto fail; + + qtd->qh = qh; + list_add_tail(&qtd->qtd_list_entry, &qh->qtd_list); + + return 0; +fail: + return retval; +} diff --git a/drivers/usb/dwc2/hw.h b/drivers/usb/dwc2/hw.h new file mode 100644 index 0000000000..13abdd5f67 --- /dev/null +++ b/drivers/usb/dwc2/hw.h @@ -0,0 +1,875 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* + * hw.h - DesignWare HS OTG Controller hardware definitions + * + * Copyright 2004-2013 Synopsys, Inc. + */ + +#ifndef __DWC2_HW_H__ +#define __DWC2_HW_H__ + +#define HSOTG_REG(x) (x) + +#define GOTGCTL HSOTG_REG(0x000) +#define GOTGCTL_CHIRPEN BIT(27) +#define GOTGCTL_MULT_VALID_BC_MASK (0x1f << 22) +#define GOTGCTL_MULT_VALID_BC_SHIFT 22 +#define GOTGCTL_CURMODE_HOST BIT(21) +#define GOTGCTL_OTGVER BIT(20) +#define GOTGCTL_BSESVLD BIT(19) +#define GOTGCTL_ASESVLD BIT(18) +#define GOTGCTL_DBNC_SHORT BIT(17) +#define GOTGCTL_CONID_B BIT(16) +#define GOTGCTL_DBNCE_FLTR_BYPASS BIT(15) +#define GOTGCTL_DEVHNPEN BIT(11) +#define GOTGCTL_HSTSETHNPEN BIT(10) +#define GOTGCTL_HNPREQ BIT(9) +#define GOTGCTL_HSTNEGSCS BIT(8) +#define GOTGCTL_BVALOVAL BIT(7) +#define GOTGCTL_BVALOEN BIT(6) +#define GOTGCTL_AVALOVAL BIT(5) +#define GOTGCTL_AVALOEN BIT(4) +#define GOTGCTL_VBVALOVAL BIT(3) +#define GOTGCTL_VBVALOEN BIT(2) +#define GOTGCTL_SESREQ BIT(1) +#define GOTGCTL_SESREQSCS BIT(0) + +#define GOTGINT HSOTG_REG(0x004) +#define GOTGINT_DBNCE_DONE BIT(19) +#define GOTGINT_A_DEV_TOUT_CHG BIT(18) +#define GOTGINT_HST_NEG_DET BIT(17) +#define GOTGINT_HST_NEG_SUC_STS_CHNG BIT(9) +#define GOTGINT_SES_REQ_SUC_STS_CHNG BIT(8) +#define GOTGINT_SES_END_DET BIT(2) + +#define GAHBCFG HSOTG_REG(0x008) +#define GAHBCFG_AHB_SINGLE BIT(23) +#define GAHBCFG_NOTI_ALL_DMA_WRIT BIT(22) +#define GAHBCFG_REM_MEM_SUPP BIT(21) +#define GAHBCFG_P_TXF_EMP_LVL BIT(8) +#define GAHBCFG_NP_TXF_EMP_LVL BIT(7) +#define GAHBCFG_DMA_EN BIT(5) +#define GAHBCFG_HBSTLEN_MASK (0xf << 1) +#define GAHBCFG_HBSTLEN_SHIFT 1 +#define GAHBCFG_HBSTLEN_SINGLE 0 +#define GAHBCFG_HBSTLEN_INCR 1 +#define GAHBCFG_HBSTLEN_INCR4 3 +#define GAHBCFG_HBSTLEN_INCR8 5 +#define GAHBCFG_HBSTLEN_INCR16 7 +#define GAHBCFG_GLBL_INTR_EN BIT(0) +#define GAHBCFG_CTRL_MASK (GAHBCFG_P_TXF_EMP_LVL | \ + GAHBCFG_NP_TXF_EMP_LVL | \ + GAHBCFG_DMA_EN | \ + GAHBCFG_GLBL_INTR_EN) + +#define GUSBCFG HSOTG_REG(0x00C) +#define GUSBCFG_FORCEDEVMODE BIT(30) +#define GUSBCFG_FORCEHOSTMODE BIT(29) +#define GUSBCFG_TXENDDELAY BIT(28) +#define GUSBCFG_ICTRAFFICPULLREMOVE BIT(27) +#define GUSBCFG_ICUSBCAP BIT(26) +#define GUSBCFG_ULPI_INT_PROT_DIS BIT(25) +#define GUSBCFG_INDICATORPASSTHROUGH BIT(24) +#define GUSBCFG_INDICATORCOMPLEMENT BIT(23) +#define GUSBCFG_TERMSELDLPULSE BIT(22) +#define GUSBCFG_ULPI_INT_VBUS_IND BIT(21) +#define GUSBCFG_ULPI_EXT_VBUS_DRV BIT(20) +#define GUSBCFG_ULPI_CLK_SUSP_M BIT(19) +#define GUSBCFG_ULPI_AUTO_RES BIT(18) +#define GUSBCFG_ULPI_FS_LS BIT(17) +#define GUSBCFG_OTG_UTMI_FS_SEL BIT(16) +#define GUSBCFG_PHY_LP_CLK_SEL BIT(15) +#define GUSBCFG_USBTRDTIM_MASK (0xf << 10) +#define GUSBCFG_USBTRDTIM_SHIFT 10 +#define GUSBCFG_HNPCAP BIT(9) +#define GUSBCFG_SRPCAP BIT(8) +#define GUSBCFG_DDRSEL BIT(7) +#define GUSBCFG_PHYSEL BIT(6) +#define GUSBCFG_FSINTF BIT(5) +#define GUSBCFG_ULPI_UTMI_SEL BIT(4) +#define GUSBCFG_PHYIF16 BIT(3) +#define GUSBCFG_PHYIF8 (0 << 3) +#define GUSBCFG_TOUTCAL_MASK (0x7 << 0) +#define GUSBCFG_TOUTCAL_SHIFT 0 +#define GUSBCFG_TOUTCAL_LIMIT 0x7 +#define GUSBCFG_TOUTCAL(_x) ((_x) << 0) + +#define GRSTCTL HSOTG_REG(0x010) +#define GRSTCTL_AHBIDLE BIT(31) +#define GRSTCTL_DMAREQ BIT(30) +#define GRSTCTL_CSFTRST_DONE BIT(29) +#define GRSTCTL_TXFNUM_MASK (0x1f << 6) +#define GRSTCTL_TXFNUM_SHIFT 6 +#define GRSTCTL_TXFNUM_LIMIT 0x1f +#define GRSTCTL_TXFNUM(_x) ((_x) << 6) +#define GRSTCTL_TXFFLSH BIT(5) +#define GRSTCTL_RXFFLSH BIT(4) +#define GRSTCTL_IN_TKNQ_FLSH BIT(3) +#define GRSTCTL_FRMCNTRRST BIT(2) +#define GRSTCTL_HSFTRST BIT(1) +#define GRSTCTL_CSFTRST BIT(0) + +#define GINTSTS HSOTG_REG(0x014) +#define GINTMSK HSOTG_REG(0x018) +#define GINTSTS_WKUPINT BIT(31) +#define GINTSTS_SESSREQINT BIT(30) +#define GINTSTS_DISCONNINT BIT(29) +#define GINTSTS_CONIDSTSCHNG BIT(28) +#define GINTSTS_LPMTRANRCVD BIT(27) +#define GINTSTS_PTXFEMP BIT(26) +#define GINTSTS_HCHINT BIT(25) +#define GINTSTS_PRTINT BIT(24) +#define GINTSTS_RESETDET BIT(23) +#define GINTSTS_FET_SUSP BIT(22) +#define GINTSTS_INCOMPL_IP BIT(21) +#define GINTSTS_INCOMPL_SOOUT BIT(21) +#define GINTSTS_INCOMPL_SOIN BIT(20) +#define GINTSTS_OEPINT BIT(19) +#define GINTSTS_IEPINT BIT(18) +#define GINTSTS_EPMIS BIT(17) +#define GINTSTS_RESTOREDONE BIT(16) +#define GINTSTS_EOPF BIT(15) +#define GINTSTS_ISOUTDROP BIT(14) +#define GINTSTS_ENUMDONE BIT(13) +#define GINTSTS_USBRST BIT(12) +#define GINTSTS_USBSUSP BIT(11) +#define GINTSTS_ERLYSUSP BIT(10) +#define GINTSTS_I2CINT BIT(9) +#define GINTSTS_ULPI_CK_INT BIT(8) +#define GINTSTS_GOUTNAKEFF BIT(7) +#define GINTSTS_GINNAKEFF BIT(6) +#define GINTSTS_NPTXFEMP BIT(5) +#define GINTSTS_RXFLVL BIT(4) +#define GINTSTS_SOF BIT(3) +#define GINTSTS_OTGINT BIT(2) +#define GINTSTS_MODEMIS BIT(1) +#define GINTSTS_CURMODE_HOST BIT(0) + +#define GRXSTSR HSOTG_REG(0x01C) +#define GRXSTSP HSOTG_REG(0x020) +#define GRXSTS_FN_MASK (0x7f << 25) +#define GRXSTS_FN_SHIFT 25 +#define GRXSTS_PKTSTS_MASK (0xf << 17) +#define GRXSTS_PKTSTS_SHIFT 17 +#define GRXSTS_PKTSTS_GLOBALOUTNAK 1 +#define GRXSTS_PKTSTS_OUTRX 2 +#define GRXSTS_PKTSTS_HCHIN 2 +#define GRXSTS_PKTSTS_OUTDONE 3 +#define GRXSTS_PKTSTS_HCHIN_XFER_COMP 3 +#define GRXSTS_PKTSTS_SETUPDONE 4 +#define GRXSTS_PKTSTS_DATATOGGLEERR 5 +#define GRXSTS_PKTSTS_SETUPRX 6 +#define GRXSTS_PKTSTS_HCHHALTED 7 +#define GRXSTS_HCHNUM_MASK (0xf << 0) +#define GRXSTS_HCHNUM_SHIFT 0 +#define GRXSTS_DPID_MASK (0x3 << 15) +#define GRXSTS_DPID_SHIFT 15 +#define GRXSTS_BYTECNT_MASK (0x7ff << 4) +#define GRXSTS_BYTECNT_SHIFT 4 +#define GRXSTS_EPNUM_MASK (0xf << 0) +#define GRXSTS_EPNUM_SHIFT 0 + +#define GRXFSIZ HSOTG_REG(0x024) +#define GRXFSIZ_DEPTH_MASK (0xffff << 0) +#define GRXFSIZ_DEPTH_SHIFT 0 + +#define GNPTXFSIZ HSOTG_REG(0x028) +/* Use FIFOSIZE_* constants to access this register */ + +#define GNPTXSTS HSOTG_REG(0x02C) +#define GNPTXSTS_NP_TXQ_TOP_MASK (0x7f << 24) +#define GNPTXSTS_NP_TXQ_TOP_SHIFT 24 +#define GNPTXSTS_NP_TXQ_SPC_AVAIL_MASK (0xff << 16) +#define GNPTXSTS_NP_TXQ_SPC_AVAIL_SHIFT 16 +#define GNPTXSTS_NP_TXQ_SPC_AVAIL_GET(_v) (((_v) >> 16) & 0xff) +#define GNPTXSTS_NP_TXF_SPC_AVAIL_MASK (0xffff << 0) +#define GNPTXSTS_NP_TXF_SPC_AVAIL_SHIFT 0 +#define GNPTXSTS_NP_TXF_SPC_AVAIL_GET(_v) (((_v) >> 0) & 0xffff) + +#define GI2CCTL HSOTG_REG(0x0030) +#define GI2CCTL_BSYDNE BIT(31) +#define GI2CCTL_RW BIT(30) +#define GI2CCTL_I2CDATSE0 BIT(28) +#define GI2CCTL_I2CDEVADDR_MASK (0x3 << 26) +#define GI2CCTL_I2CDEVADDR_SHIFT 26 +#define GI2CCTL_I2CSUSPCTL BIT(25) +#define GI2CCTL_ACK BIT(24) +#define GI2CCTL_I2CEN BIT(23) +#define GI2CCTL_ADDR_MASK (0x7f << 16) +#define GI2CCTL_ADDR_SHIFT 16 +#define GI2CCTL_REGADDR_MASK (0xff << 8) +#define GI2CCTL_REGADDR_SHIFT 8 +#define GI2CCTL_RWDATA_MASK (0xff << 0) +#define GI2CCTL_RWDATA_SHIFT 0 + +#define GPVNDCTL HSOTG_REG(0x0034) +#define GGPIO HSOTG_REG(0x0038) +#define GGPIO_STM32_OTG_GCCFG_PWRDWN BIT(16) +#define GGPIO_STM32_OTG_GCCFG_VBDEN BIT(21) +#define GGPIO_STM32_OTG_GCCFG_IDEN BIT(22) + +#define GUID HSOTG_REG(0x003c) +#define GSNPSID HSOTG_REG(0x0040) +#define GHWCFG1 HSOTG_REG(0x0044) +#define GSNPSID_ID_MASK GENMASK(31, 16) + +#define GHWCFG2 HSOTG_REG(0x0048) +#define GHWCFG2_OTG_ENABLE_IC_USB BIT(31) +#define GHWCFG2_DEV_TOKEN_Q_DEPTH_MASK (0x1f << 26) +#define GHWCFG2_DEV_TOKEN_Q_DEPTH_SHIFT 26 +#define GHWCFG2_HOST_PERIO_TX_Q_DEPTH_MASK (0x3 << 24) +#define GHWCFG2_HOST_PERIO_TX_Q_DEPTH_SHIFT 24 +#define GHWCFG2_NONPERIO_TX_Q_DEPTH_MASK (0x3 << 22) +#define GHWCFG2_NONPERIO_TX_Q_DEPTH_SHIFT 22 +#define GHWCFG2_MULTI_PROC_INT BIT(20) +#define GHWCFG2_DYNAMIC_FIFO BIT(19) +#define GHWCFG2_PERIO_EP_SUPPORTED BIT(18) +#define GHWCFG2_NUM_HOST_CHAN_MASK (0xf << 14) +#define GHWCFG2_NUM_HOST_CHAN_SHIFT 14 +#define GHWCFG2_NUM_DEV_EP_MASK (0xf << 10) +#define GHWCFG2_NUM_DEV_EP_SHIFT 10 +#define GHWCFG2_FS_PHY_TYPE_MASK (0x3 << 8) +#define GHWCFG2_FS_PHY_TYPE_SHIFT 8 +#define GHWCFG2_FS_PHY_TYPE_NOT_SUPPORTED 0 +#define GHWCFG2_FS_PHY_TYPE_DEDICATED 1 +#define GHWCFG2_FS_PHY_TYPE_SHARED_UTMI 2 +#define GHWCFG2_FS_PHY_TYPE_SHARED_ULPI 3 +#define GHWCFG2_HS_PHY_TYPE_MASK (0x3 << 6) +#define GHWCFG2_HS_PHY_TYPE_SHIFT 6 +#define GHWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0 +#define GHWCFG2_HS_PHY_TYPE_UTMI 1 +#define GHWCFG2_HS_PHY_TYPE_ULPI 2 +#define GHWCFG2_HS_PHY_TYPE_UTMI_ULPI 3 +#define GHWCFG2_POINT2POINT BIT(5) +#define GHWCFG2_ARCHITECTURE_MASK (0x3 << 3) +#define GHWCFG2_ARCHITECTURE_SHIFT 3 +#define GHWCFG2_SLAVE_ONLY_ARCH 0 +#define GHWCFG2_EXT_DMA_ARCH 1 +#define GHWCFG2_INT_DMA_ARCH 2 +#define GHWCFG2_OP_MODE_MASK (0x7 << 0) +#define GHWCFG2_OP_MODE_SHIFT 0 +#define GHWCFG2_OP_MODE_HNP_SRP_CAPABLE 0 +#define GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE 1 +#define GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE 2 +#define GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3 +#define GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4 +#define GHWCFG2_OP_MODE_SRP_CAPABLE_HOST 5 +#define GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6 +#define GHWCFG2_OP_MODE_UNDEFINED 7 + +#define GHWCFG3 HSOTG_REG(0x004c) +#define GHWCFG3_DFIFO_DEPTH_MASK (0xffff << 16) +#define GHWCFG3_DFIFO_DEPTH_SHIFT 16 +#define GHWCFG3_OTG_LPM_EN BIT(15) +#define GHWCFG3_BC_SUPPORT BIT(14) +#define GHWCFG3_OTG_ENABLE_HSIC BIT(13) +#define GHWCFG3_ADP_SUPP BIT(12) +#define GHWCFG3_SYNCH_RESET_TYPE BIT(11) +#define GHWCFG3_OPTIONAL_FEATURES BIT(10) +#define GHWCFG3_VENDOR_CTRL_IF BIT(9) +#define GHWCFG3_I2C BIT(8) +#define GHWCFG3_OTG_FUNC BIT(7) +#define GHWCFG3_PACKET_SIZE_CNTR_WIDTH_MASK (0x7 << 4) +#define GHWCFG3_PACKET_SIZE_CNTR_WIDTH_SHIFT 4 +#define GHWCFG3_XFER_SIZE_CNTR_WIDTH_MASK (0xf << 0) +#define GHWCFG3_XFER_SIZE_CNTR_WIDTH_SHIFT 0 + +#define GHWCFG4 HSOTG_REG(0x0050) +#define GHWCFG4_DESC_DMA_DYN BIT(31) +#define GHWCFG4_DESC_DMA BIT(30) +#define GHWCFG4_NUM_IN_EPS_MASK (0xf << 26) +#define GHWCFG4_NUM_IN_EPS_SHIFT 26 +#define GHWCFG4_DED_FIFO_EN BIT(25) +#define GHWCFG4_DED_FIFO_SHIFT 25 +#define GHWCFG4_SESSION_END_FILT_EN BIT(24) +#define GHWCFG4_B_VALID_FILT_EN BIT(23) +#define GHWCFG4_A_VALID_FILT_EN BIT(22) +#define GHWCFG4_VBUS_VALID_FILT_EN BIT(21) +#define GHWCFG4_IDDIG_FILT_EN BIT(20) +#define GHWCFG4_NUM_DEV_MODE_CTRL_EP_MASK (0xf << 16) +#define GHWCFG4_NUM_DEV_MODE_CTRL_EP_SHIFT 16 +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_MASK (0x3 << 14) +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_SHIFT 14 +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_8 0 +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_16 1 +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_8_OR_16 2 +#define GHWCFG4_ACG_SUPPORTED BIT(12) +#define GHWCFG4_IPG_ISOC_SUPPORTED BIT(11) +#define GHWCFG4_SERVICE_INTERVAL_SUPPORTED BIT(10) +#define GHWCFG4_XHIBER BIT(7) +#define GHWCFG4_HIBER BIT(6) +#define GHWCFG4_MIN_AHB_FREQ BIT(5) +#define GHWCFG4_POWER_OPTIMIZ BIT(4) +#define GHWCFG4_NUM_DEV_PERIO_IN_EP_MASK (0xf << 0) +#define GHWCFG4_NUM_DEV_PERIO_IN_EP_SHIFT 0 + +#define GLPMCFG HSOTG_REG(0x0054) +#define GLPMCFG_INVSELHSIC BIT(31) +#define GLPMCFG_HSICCON BIT(30) +#define GLPMCFG_RSTRSLPSTS BIT(29) +#define GLPMCFG_ENBESL BIT(28) +#define GLPMCFG_LPM_RETRYCNT_STS_MASK (0x7 << 25) +#define GLPMCFG_LPM_RETRYCNT_STS_SHIFT 25 +#define GLPMCFG_SNDLPM BIT(24) +#define GLPMCFG_RETRY_CNT_MASK (0x7 << 21) +#define GLPMCFG_RETRY_CNT_SHIFT 21 +#define GLPMCFG_LPM_REJECT_CTRL_CONTROL BIT(21) +#define GLPMCFG_LPM_ACCEPT_CTRL_ISOC BIT(22) +#define GLPMCFG_LPM_CHNL_INDX_MASK (0xf << 17) +#define GLPMCFG_LPM_CHNL_INDX_SHIFT 17 +#define GLPMCFG_L1RESUMEOK BIT(16) +#define GLPMCFG_SLPSTS BIT(15) +#define GLPMCFG_COREL1RES_MASK (0x3 << 13) +#define GLPMCFG_COREL1RES_SHIFT 13 +#define GLPMCFG_HIRD_THRES_MASK (0x1f << 8) +#define GLPMCFG_HIRD_THRES_SHIFT 8 +#define GLPMCFG_HIRD_THRES_EN (0x10 << 8) +#define GLPMCFG_ENBLSLPM BIT(7) +#define GLPMCFG_BREMOTEWAKE BIT(6) +#define GLPMCFG_HIRD_MASK (0xf << 2) +#define GLPMCFG_HIRD_SHIFT 2 +#define GLPMCFG_APPL1RES BIT(1) +#define GLPMCFG_LPMCAP BIT(0) + +#define GPWRDN HSOTG_REG(0x0058) +#define GPWRDN_MULT_VAL_ID_BC_MASK (0x1f << 24) +#define GPWRDN_MULT_VAL_ID_BC_SHIFT 24 +#define GPWRDN_ADP_INT BIT(23) +#define GPWRDN_BSESSVLD BIT(22) +#define GPWRDN_IDSTS BIT(21) +#define GPWRDN_LINESTATE_MASK (0x3 << 19) +#define GPWRDN_LINESTATE_SHIFT 19 +#define GPWRDN_STS_CHGINT_MSK BIT(18) +#define GPWRDN_STS_CHGINT BIT(17) +#define GPWRDN_SRP_DET_MSK BIT(16) +#define GPWRDN_SRP_DET BIT(15) +#define GPWRDN_CONNECT_DET_MSK BIT(14) +#define GPWRDN_CONNECT_DET BIT(13) +#define GPWRDN_DISCONN_DET_MSK BIT(12) +#define GPWRDN_DISCONN_DET BIT(11) +#define GPWRDN_RST_DET_MSK BIT(10) +#define GPWRDN_RST_DET BIT(9) +#define GPWRDN_LNSTSCHG_MSK BIT(8) +#define GPWRDN_LNSTSCHG BIT(7) +#define GPWRDN_DIS_VBUS BIT(6) +#define GPWRDN_PWRDNSWTCH BIT(5) +#define GPWRDN_PWRDNRSTN BIT(4) +#define GPWRDN_PWRDNCLMP BIT(3) +#define GPWRDN_RESTORE BIT(2) +#define GPWRDN_PMUACTV BIT(1) +#define GPWRDN_PMUINTSEL BIT(0) + +#define GDFIFOCFG HSOTG_REG(0x005c) +#define GDFIFOCFG_EPINFOBASE_MASK (0xffff << 16) +#define GDFIFOCFG_EPINFOBASE_SHIFT 16 +#define GDFIFOCFG_GDFIFOCFG_MASK (0xffff << 0) +#define GDFIFOCFG_GDFIFOCFG_SHIFT 0 + +#define ADPCTL HSOTG_REG(0x0060) +#define ADPCTL_AR_MASK (0x3 << 27) +#define ADPCTL_AR_SHIFT 27 +#define ADPCTL_ADP_TMOUT_INT_MSK BIT(26) +#define ADPCTL_ADP_SNS_INT_MSK BIT(25) +#define ADPCTL_ADP_PRB_INT_MSK BIT(24) +#define ADPCTL_ADP_TMOUT_INT BIT(23) +#define ADPCTL_ADP_SNS_INT BIT(22) +#define ADPCTL_ADP_PRB_INT BIT(21) +#define ADPCTL_ADPENA BIT(20) +#define ADPCTL_ADPRES BIT(19) +#define ADPCTL_ENASNS BIT(18) +#define ADPCTL_ENAPRB BIT(17) +#define ADPCTL_RTIM_MASK (0x7ff << 6) +#define ADPCTL_RTIM_SHIFT 6 +#define ADPCTL_PRB_PER_MASK (0x3 << 4) +#define ADPCTL_PRB_PER_SHIFT 4 +#define ADPCTL_PRB_DELTA_MASK (0x3 << 2) +#define ADPCTL_PRB_DELTA_SHIFT 2 +#define ADPCTL_PRB_DSCHRG_MASK (0x3 << 0) +#define ADPCTL_PRB_DSCHRG_SHIFT 0 + +#define GREFCLK HSOTG_REG(0x0064) +#define GREFCLK_REFCLKPER_MASK (0x1ffff << 15) +#define GREFCLK_REFCLKPER_SHIFT 15 +#define GREFCLK_REF_CLK_MODE BIT(14) +#define GREFCLK_SOF_CNT_WKUP_ALERT_MASK (0x3ff) +#define GREFCLK_SOF_CNT_WKUP_ALERT_SHIFT 0 + +#define GINTMSK2 HSOTG_REG(0x0068) +#define GINTMSK2_WKUP_ALERT_INT_MSK BIT(0) + +#define GINTSTS2 HSOTG_REG(0x006c) +#define GINTSTS2_WKUP_ALERT_INT BIT(0) + +#define HPTXFSIZ HSOTG_REG(0x100) +/* Use FIFOSIZE_* constants to access this register */ + +#define DPTXFSIZN(_a) HSOTG_REG(0x104 + (((_a) - 1) * 4)) +/* Use FIFOSIZE_* constants to access this register */ + +/* These apply to the GNPTXFSIZ, HPTXFSIZ and DPTXFSIZN registers */ +#define FIFOSIZE_DEPTH_MASK (0xffff << 16) +#define FIFOSIZE_DEPTH_SHIFT 16 +#define FIFOSIZE_STARTADDR_MASK (0xffff << 0) +#define FIFOSIZE_STARTADDR_SHIFT 0 +#define FIFOSIZE_DEPTH_GET(_x) (((_x) >> 16) & 0xffff) + +/* Device mode registers */ + +#define DCFG HSOTG_REG(0x800) +#define DCFG_DESCDMA_EN BIT(23) +#define DCFG_EPMISCNT_MASK (0x1f << 18) +#define DCFG_EPMISCNT_SHIFT 18 +#define DCFG_EPMISCNT_LIMIT 0x1f +#define DCFG_EPMISCNT(_x) ((_x) << 18) +#define DCFG_IPG_ISOC_SUPPORDED BIT(17) +#define DCFG_PERFRINT_MASK (0x3 << 11) +#define DCFG_PERFRINT_SHIFT 11 +#define DCFG_PERFRINT_LIMIT 0x3 +#define DCFG_PERFRINT(_x) ((_x) << 11) +#define DCFG_DEVADDR_MASK (0x7f << 4) +#define DCFG_DEVADDR_SHIFT 4 +#define DCFG_DEVADDR_LIMIT 0x7f +#define DCFG_DEVADDR(_x) ((_x) << 4) +#define DCFG_NZ_STS_OUT_HSHK BIT(2) +#define DCFG_DEVSPD_MASK (0x3 << 0) +#define DCFG_DEVSPD_SHIFT 0 +#define DCFG_DEVSPD_HS 0 +#define DCFG_DEVSPD_FS 1 +#define DCFG_DEVSPD_LS 2 +#define DCFG_DEVSPD_FS48 3 + +#define DCTL HSOTG_REG(0x804) +#define DCTL_SERVICE_INTERVAL_SUPPORTED BIT(19) +#define DCTL_PWRONPRGDONE BIT(11) +#define DCTL_CGOUTNAK BIT(10) +#define DCTL_SGOUTNAK BIT(9) +#define DCTL_CGNPINNAK BIT(8) +#define DCTL_SGNPINNAK BIT(7) +#define DCTL_TSTCTL_MASK (0x7 << 4) +#define DCTL_TSTCTL_SHIFT 4 +#define DCTL_GOUTNAKSTS BIT(3) +#define DCTL_GNPINNAKSTS BIT(2) +#define DCTL_SFTDISCON BIT(1) +#define DCTL_RMTWKUPSIG BIT(0) + +#define DSTS HSOTG_REG(0x808) +#define DSTS_SOFFN_MASK (0x3fff << 8) +#define DSTS_SOFFN_SHIFT 8 +#define DSTS_SOFFN_LIMIT 0x3fff +#define DSTS_SOFFN(_x) ((_x) << 8) +#define DSTS_ERRATICERR BIT(3) +#define DSTS_ENUMSPD_MASK (0x3 << 1) +#define DSTS_ENUMSPD_SHIFT 1 +#define DSTS_ENUMSPD_HS 0 +#define DSTS_ENUMSPD_FS 1 +#define DSTS_ENUMSPD_LS 2 +#define DSTS_ENUMSPD_FS48 3 +#define DSTS_SUSPSTS BIT(0) + +#define DIEPMSK HSOTG_REG(0x810) +#define DIEPMSK_NAKMSK BIT(13) +#define DIEPMSK_BNAININTRMSK BIT(9) +#define DIEPMSK_TXFIFOUNDRNMSK BIT(8) +#define DIEPMSK_TXFIFOEMPTY BIT(7) +#define DIEPMSK_INEPNAKEFFMSK BIT(6) +#define DIEPMSK_INTKNEPMISMSK BIT(5) +#define DIEPMSK_INTKNTXFEMPMSK BIT(4) +#define DIEPMSK_TIMEOUTMSK BIT(3) +#define DIEPMSK_AHBERRMSK BIT(2) +#define DIEPMSK_EPDISBLDMSK BIT(1) +#define DIEPMSK_XFERCOMPLMSK BIT(0) + +#define DOEPMSK HSOTG_REG(0x814) +#define DOEPMSK_BNAMSK BIT(9) +#define DOEPMSK_BACK2BACKSETUP BIT(6) +#define DOEPMSK_STSPHSERCVDMSK BIT(5) +#define DOEPMSK_OUTTKNEPDISMSK BIT(4) +#define DOEPMSK_SETUPMSK BIT(3) +#define DOEPMSK_AHBERRMSK BIT(2) +#define DOEPMSK_EPDISBLDMSK BIT(1) +#define DOEPMSK_XFERCOMPLMSK BIT(0) + +#define DAINT HSOTG_REG(0x818) +#define DAINTMSK HSOTG_REG(0x81C) +#define DAINT_OUTEP_SHIFT 16 +#define DAINT_OUTEP(_x) (1 << ((_x) + 16)) +#define DAINT_INEP(_x) (1 << (_x)) + +#define DTKNQR1 HSOTG_REG(0x820) +#define DTKNQR2 HSOTG_REG(0x824) +#define DTKNQR3 HSOTG_REG(0x830) +#define DTKNQR4 HSOTG_REG(0x834) +#define DIEPEMPMSK HSOTG_REG(0x834) + +#define DVBUSDIS HSOTG_REG(0x828) +#define DVBUSPULSE HSOTG_REG(0x82C) + +#define DIEPCTL0 HSOTG_REG(0x900) +#define DIEPCTL(_a) HSOTG_REG(0x900 + ((_a) * 0x20)) + +#define DOEPCTL0 HSOTG_REG(0xB00) +#define DOEPCTL(_a) HSOTG_REG(0xB00 + ((_a) * 0x20)) + +/* EP0 specialness: + * bits[29..28] - reserved (no SetD0PID, SetD1PID) + * bits[25..22] - should always be zero, this isn't a periodic endpoint + * bits[10..0] - MPS setting different for EP0 + */ +#define D0EPCTL_MPS_MASK (0x3 << 0) +#define D0EPCTL_MPS_SHIFT 0 +#define D0EPCTL_MPS_64 0 +#define D0EPCTL_MPS_32 1 +#define D0EPCTL_MPS_16 2 +#define D0EPCTL_MPS_8 3 + +#define DXEPCTL_EPENA BIT(31) +#define DXEPCTL_EPDIS BIT(30) +#define DXEPCTL_SETD1PID BIT(29) +#define DXEPCTL_SETODDFR BIT(29) +#define DXEPCTL_SETD0PID BIT(28) +#define DXEPCTL_SETEVENFR BIT(28) +#define DXEPCTL_SNAK BIT(27) +#define DXEPCTL_CNAK BIT(26) +#define DXEPCTL_TXFNUM_MASK (0xf << 22) +#define DXEPCTL_TXFNUM_SHIFT 22 +#define DXEPCTL_TXFNUM_LIMIT 0xf +#define DXEPCTL_TXFNUM(_x) ((_x) << 22) +#define DXEPCTL_STALL BIT(21) +#define DXEPCTL_SNP BIT(20) +#define DXEPCTL_EPTYPE_MASK (0x3 << 18) +#define DXEPCTL_EPTYPE_CONTROL (0x0 << 18) +#define DXEPCTL_EPTYPE_ISO (0x1 << 18) +#define DXEPCTL_EPTYPE_BULK (0x2 << 18) +#define DXEPCTL_EPTYPE_INTERRUPT (0x3 << 18) + +#define DXEPCTL_NAKSTS BIT(17) +#define DXEPCTL_DPID BIT(16) +#define DXEPCTL_EOFRNUM BIT(16) +#define DXEPCTL_USBACTEP BIT(15) +#define DXEPCTL_NEXTEP_MASK (0xf << 11) +#define DXEPCTL_NEXTEP_SHIFT 11 +#define DXEPCTL_NEXTEP_LIMIT 0xf +#define DXEPCTL_NEXTEP(_x) ((_x) << 11) +#define DXEPCTL_MPS_MASK (0x7ff << 0) +#define DXEPCTL_MPS_SHIFT 0 +#define DXEPCTL_MPS_LIMIT 0x7ff +#define DXEPCTL_MPS(_x) ((_x) << 0) + +#define DIEPINT(_a) HSOTG_REG(0x908 + ((_a) * 0x20)) +#define DOEPINT(_a) HSOTG_REG(0xB08 + ((_a) * 0x20)) +#define DXEPINT_SETUP_RCVD BIT(15) +#define DXEPINT_NYETINTRPT BIT(14) +#define DXEPINT_NAKINTRPT BIT(13) +#define DXEPINT_BBLEERRINTRPT BIT(12) +#define DXEPINT_PKTDRPSTS BIT(11) +#define DXEPINT_BNAINTR BIT(9) +#define DXEPINT_TXFIFOUNDRN BIT(8) +#define DXEPINT_OUTPKTERR BIT(8) +#define DXEPINT_TXFEMP BIT(7) +#define DXEPINT_INEPNAKEFF BIT(6) +#define DXEPINT_BACK2BACKSETUP BIT(6) +#define DXEPINT_INTKNEPMIS BIT(5) +#define DXEPINT_STSPHSERCVD BIT(5) +#define DXEPINT_INTKNTXFEMP BIT(4) +#define DXEPINT_OUTTKNEPDIS BIT(4) +#define DXEPINT_TIMEOUT BIT(3) +#define DXEPINT_SETUP BIT(3) +#define DXEPINT_AHBERR BIT(2) +#define DXEPINT_EPDISBLD BIT(1) +#define DXEPINT_XFERCOMPL BIT(0) + +#define DIEPTSIZ0 HSOTG_REG(0x910) +#define DIEPTSIZ0_PKTCNT_MASK (0x3 << 19) +#define DIEPTSIZ0_PKTCNT_SHIFT 19 +#define DIEPTSIZ0_PKTCNT_LIMIT 0x3 +#define DIEPTSIZ0_PKTCNT(_x) ((_x) << 19) +#define DIEPTSIZ0_XFERSIZE_MASK (0x7f << 0) +#define DIEPTSIZ0_XFERSIZE_SHIFT 0 +#define DIEPTSIZ0_XFERSIZE_LIMIT 0x7f +#define DIEPTSIZ0_XFERSIZE(_x) ((_x) << 0) + +#define DOEPTSIZ0 HSOTG_REG(0xB10) +#define DOEPTSIZ0_SUPCNT_MASK (0x3 << 29) +#define DOEPTSIZ0_SUPCNT_SHIFT 29 +#define DOEPTSIZ0_SUPCNT_LIMIT 0x3 +#define DOEPTSIZ0_SUPCNT(_x) ((_x) << 29) +#define DOEPTSIZ0_PKTCNT BIT(19) +#define DOEPTSIZ0_XFERSIZE_MASK (0x7f << 0) +#define DOEPTSIZ0_XFERSIZE_SHIFT 0 + +#define DIEPTSIZ(_a) HSOTG_REG(0x910 + ((_a) * 0x20)) +#define DOEPTSIZ(_a) HSOTG_REG(0xB10 + ((_a) * 0x20)) +#define DXEPTSIZ_MC_MASK (0x3 << 29) +#define DXEPTSIZ_MC_SHIFT 29 +#define DXEPTSIZ_MC_LIMIT 0x3 +#define DXEPTSIZ_MC(_x) ((_x) << 29) +#define DXEPTSIZ_PKTCNT_MASK (0x3ff << 19) +#define DXEPTSIZ_PKTCNT_SHIFT 19 +#define DXEPTSIZ_PKTCNT_LIMIT 0x3ff +#define DXEPTSIZ_PKTCNT_GET(_v) (((_v) >> 19) & 0x3ff) +#define DXEPTSIZ_PKTCNT(_x) ((_x) << 19) +#define DXEPTSIZ_XFERSIZE_MASK (0x7ffff << 0) +#define DXEPTSIZ_XFERSIZE_SHIFT 0 +#define DXEPTSIZ_XFERSIZE_LIMIT 0x7ffff +#define DXEPTSIZ_XFERSIZE_GET(_v) (((_v) >> 0) & 0x7ffff) +#define DXEPTSIZ_XFERSIZE(_x) ((_x) << 0) + +#define DIEPDMA(_a) HSOTG_REG(0x914 + ((_a) * 0x20)) +#define DOEPDMA(_a) HSOTG_REG(0xB14 + ((_a) * 0x20)) + +#define DTXFSTS(_a) HSOTG_REG(0x918 + ((_a) * 0x20)) + +#define PCGCTL HSOTG_REG(0x0e00) +#define PCGCTL_IF_DEV_MODE BIT(31) +#define PCGCTL_P2HD_PRT_SPD_MASK (0x3 << 29) +#define PCGCTL_P2HD_PRT_SPD_SHIFT 29 +#define PCGCTL_P2HD_DEV_ENUM_SPD_MASK (0x3 << 27) +#define PCGCTL_P2HD_DEV_ENUM_SPD_SHIFT 27 +#define PCGCTL_MAC_DEV_ADDR_MASK (0x7f << 20) +#define PCGCTL_MAC_DEV_ADDR_SHIFT 20 +#define PCGCTL_MAX_TERMSEL BIT(19) +#define PCGCTL_MAX_XCVRSELECT_MASK (0x3 << 17) +#define PCGCTL_MAX_XCVRSELECT_SHIFT 17 +#define PCGCTL_PORT_POWER BIT(16) +#define PCGCTL_PRT_CLK_SEL_MASK (0x3 << 14) +#define PCGCTL_PRT_CLK_SEL_SHIFT 14 +#define PCGCTL_ESS_REG_RESTORED BIT(13) +#define PCGCTL_EXTND_HIBER_SWITCH BIT(12) +#define PCGCTL_EXTND_HIBER_PWRCLMP BIT(11) +#define PCGCTL_ENBL_EXTND_HIBER BIT(10) +#define PCGCTL_RESTOREMODE BIT(9) +#define PCGCTL_RESETAFTSUSP BIT(8) +#define PCGCTL_DEEP_SLEEP BIT(7) +#define PCGCTL_PHY_IN_SLEEP BIT(6) +#define PCGCTL_ENBL_SLEEP_GATING BIT(5) +#define PCGCTL_RSTPDWNMODULE BIT(3) +#define PCGCTL_PWRCLMP BIT(2) +#define PCGCTL_GATEHCLK BIT(1) +#define PCGCTL_STOPPCLK BIT(0) + +#define PCGCCTL1 HSOTG_REG(0xe04) +#define PCGCCTL1_TIMER (0x3 << 1) +#define PCGCCTL1_GATEEN BIT(0) + +#define EPFIFO(_a) HSOTG_REG(0x1000 + ((_a) * 0x1000)) + +/* Host Mode Registers */ + +#define HCFG HSOTG_REG(0x0400) +#define HCFG_MODECHTIMEN BIT(31) +#define HCFG_PERSCHEDENA BIT(26) +#define HCFG_FRLISTEN_MASK (0x3 << 24) +#define HCFG_FRLISTEN_SHIFT 24 +#define HCFG_FRLISTEN_8 (0 << 24) +#define FRLISTEN_8_SIZE 8 +#define HCFG_FRLISTEN_16 BIT(24) +#define FRLISTEN_16_SIZE 16 +#define HCFG_FRLISTEN_32 (2 << 24) +#define FRLISTEN_32_SIZE 32 +#define HCFG_FRLISTEN_64 (3 << 24) +#define FRLISTEN_64_SIZE 64 +#define HCFG_DESCDMA BIT(23) +#define HCFG_RESVALID_MASK (0xff << 8) +#define HCFG_RESVALID_SHIFT 8 +#define HCFG_ENA32KHZ BIT(7) +#define HCFG_FSLSSUPP BIT(2) +#define HCFG_FSLSPCLKSEL_MASK (0x3 << 0) +#define HCFG_FSLSPCLKSEL_SHIFT 0 +#define HCFG_FSLSPCLKSEL_30_60_MHZ 0 +#define HCFG_FSLSPCLKSEL_48_MHZ 1 +#define HCFG_FSLSPCLKSEL_6_MHZ 2 + +#define HFIR HSOTG_REG(0x0404) +#define HFIR_FRINT_MASK (0xffff << 0) +#define HFIR_FRINT_SHIFT 0 +#define HFIR_RLDCTRL BIT(16) + +#define HFNUM HSOTG_REG(0x0408) +#define HFNUM_FRREM_MASK (0xffff << 16) +#define HFNUM_FRREM_SHIFT 16 +#define HFNUM_FRNUM_MASK (0xffff << 0) +#define HFNUM_FRNUM_SHIFT 0 +#define HFNUM_MAX_FRNUM 0x3fff + +#define HPTXSTS HSOTG_REG(0x0410) +#define TXSTS_QTOP_ODD BIT(31) +#define TXSTS_QTOP_CHNEP_MASK (0xf << 27) +#define TXSTS_QTOP_CHNEP_SHIFT 27 +#define TXSTS_QTOP_TOKEN_MASK (0x3 << 25) +#define TXSTS_QTOP_TOKEN_SHIFT 25 +#define TXSTS_QTOP_TERMINATE BIT(24) +#define TXSTS_QSPCAVAIL_MASK (0xff << 16) +#define TXSTS_QSPCAVAIL_SHIFT 16 +#define TXSTS_FSPCAVAIL_MASK (0xffff << 0) +#define TXSTS_FSPCAVAIL_SHIFT 0 + +#define HAINT HSOTG_REG(0x0414) +#define HAINTMSK HSOTG_REG(0x0418) +#define HFLBADDR HSOTG_REG(0x041c) + +#define HPRT0 HSOTG_REG(0x0440) +#define HPRT0_SPD_MASK (0x3 << 17) +#define HPRT0_SPD_SHIFT 17 +#define HPRT0_SPD_HIGH_SPEED 0 +#define HPRT0_SPD_FULL_SPEED 1 +#define HPRT0_SPD_LOW_SPEED 2 +#define HPRT0_TSTCTL_MASK (0xf << 13) +#define HPRT0_TSTCTL_SHIFT 13 +#define HPRT0_PWR BIT(12) +#define HPRT0_LNSTS_MASK (0x3 << 10) +#define HPRT0_LNSTS_SHIFT 10 +#define HPRT0_RST BIT(8) +#define HPRT0_SUSP BIT(7) +#define HPRT0_RES BIT(6) +#define HPRT0_OVRCURRCHG BIT(5) +#define HPRT0_OVRCURRACT BIT(4) +#define HPRT0_ENACHG BIT(3) +#define HPRT0_ENA BIT(2) +#define HPRT0_CONNDET BIT(1) +#define HPRT0_CONNSTS BIT(0) + +#define HCCHAR(_ch) HSOTG_REG(0x0500 + 0x20 * (_ch)) +#define HCCHAR_CHENA BIT(31) +#define HCCHAR_CHDIS BIT(30) +#define HCCHAR_ODDFRM BIT(29) +#define HCCHAR_DEVADDR_MASK (0x7f << 22) +#define HCCHAR_DEVADDR_SHIFT 22 +#define HCCHAR_MULTICNT_MASK (0x3 << 20) +#define HCCHAR_MULTICNT_SHIFT 20 +#define HCCHAR_EPTYPE_MASK (0x3 << 18) +#define HCCHAR_EPTYPE_SHIFT 18 +#define HCCHAR_LSPDDEV BIT(17) +#define HCCHAR_EPDIR BIT(15) +#define HCCHAR_EPNUM_MASK (0xf << 11) +#define HCCHAR_EPNUM_SHIFT 11 +#define HCCHAR_MPS_MASK (0x7ff << 0) +#define HCCHAR_MPS_SHIFT 0 + +#define HCSPLT(_ch) HSOTG_REG(0x0504 + 0x20 * (_ch)) +#define HCSPLT_SPLTENA BIT(31) +#define HCSPLT_COMPSPLT BIT(16) +#define HCSPLT_XACTPOS_MASK (0x3 << 14) +#define HCSPLT_XACTPOS_SHIFT 14 +#define HCSPLT_XACTPOS_MID 0 +#define HCSPLT_XACTPOS_END 1 +#define HCSPLT_XACTPOS_BEGIN 2 +#define HCSPLT_XACTPOS_ALL 3 +#define HCSPLT_HUBADDR_MASK (0x7f << 7) +#define HCSPLT_HUBADDR_SHIFT 7 +#define HCSPLT_PRTADDR_MASK (0x7f << 0) +#define HCSPLT_PRTADDR_SHIFT 0 + +#define HCINT(_ch) HSOTG_REG(0x0508 + 0x20 * (_ch)) +#define HCINTMSK(_ch) HSOTG_REG(0x050c + 0x20 * (_ch)) +#define HCINTMSK_RESERVED14_31 (0x3ffff << 14) +#define HCINTMSK_FRM_LIST_ROLL BIT(13) +#define HCINTMSK_XCS_XACT BIT(12) +#define HCINTMSK_BNA BIT(11) +#define HCINTMSK_DATATGLERR BIT(10) +#define HCINTMSK_FRMOVRUN BIT(9) +#define HCINTMSK_BBLERR BIT(8) +#define HCINTMSK_XACTERR BIT(7) +#define HCINTMSK_NYET BIT(6) +#define HCINTMSK_ACK BIT(5) +#define HCINTMSK_NAK BIT(4) +#define HCINTMSK_STALL BIT(3) +#define HCINTMSK_AHBERR BIT(2) +#define HCINTMSK_CHHLTD BIT(1) +#define HCINTMSK_XFERCOMPL BIT(0) + +#define HCTSIZ(_ch) HSOTG_REG(0x0510 + 0x20 * (_ch)) +#define TSIZ_DOPNG BIT(31) +#define TSIZ_SC_MC_PID_MASK (0x3 << 29) +#define TSIZ_SC_MC_PID_SHIFT 29 +#define TSIZ_SC_MC_PID_DATA0 0 +#define TSIZ_SC_MC_PID_DATA2 1 +#define TSIZ_SC_MC_PID_DATA1 2 +#define TSIZ_SC_MC_PID_MDATA 3 +#define TSIZ_SC_MC_PID_SETUP 3 +#define TSIZ_PKTCNT_MASK (0x3ff << 19) +#define TSIZ_PKTCNT_SHIFT 19 +#define TSIZ_NTD_MASK (0xff << 8) +#define TSIZ_NTD_SHIFT 8 +#define TSIZ_SCHINFO_MASK (0xff << 0) +#define TSIZ_SCHINFO_SHIFT 0 +#define TSIZ_XFERSIZE_MASK (0x7ffff << 0) +#define TSIZ_XFERSIZE_SHIFT 0 + +#define HCDMA(_ch) HSOTG_REG(0x0514 + 0x20 * (_ch)) + +#define HCDMAB(_ch) HSOTG_REG(0x051c + 0x20 * (_ch)) + +#define HCFIFO(_ch) HSOTG_REG(0x1000 + 0x1000 * (_ch)) + +/** + * struct dwc2_dma_desc - DMA descriptor structure, + * used for both host and gadget modes + * + * @status: DMA descriptor status quadlet + * @buf: DMA descriptor data buffer pointer + * + * DMA Descriptor structure contains two quadlets: + * Status quadlet and Data buffer pointer. + */ +struct dwc2_dma_desc { + u32 status; + u32 buf; +} __packed; + +/* Host Mode DMA descriptor status quadlet */ + +#define HOST_DMA_A BIT(31) +#define HOST_DMA_STS_MASK (0x3 << 28) +#define HOST_DMA_STS_SHIFT 28 +#define HOST_DMA_STS_PKTERR BIT(28) +#define HOST_DMA_EOL BIT(26) +#define HOST_DMA_IOC BIT(25) +#define HOST_DMA_SUP BIT(24) +#define HOST_DMA_ALT_QTD BIT(23) +#define HOST_DMA_QTD_OFFSET_MASK (0x3f << 17) +#define HOST_DMA_QTD_OFFSET_SHIFT 17 +#define HOST_DMA_ISOC_NBYTES_MASK (0xfff << 0) +#define HOST_DMA_ISOC_NBYTES_SHIFT 0 +#define HOST_DMA_NBYTES_MASK (0x1ffff << 0) +#define HOST_DMA_NBYTES_SHIFT 0 +#define HOST_DMA_NBYTES_LIMIT 131071 + +/* Device Mode DMA descriptor status quadlet */ + +#define DEV_DMA_BUFF_STS_MASK (0x3 << 30) +#define DEV_DMA_BUFF_STS_SHIFT 30 +#define DEV_DMA_BUFF_STS_HREADY 0 +#define DEV_DMA_BUFF_STS_DMABUSY 1 +#define DEV_DMA_BUFF_STS_DMADONE 2 +#define DEV_DMA_BUFF_STS_HBUSY 3 +#define DEV_DMA_STS_MASK (0x3 << 28) +#define DEV_DMA_STS_SHIFT 28 +#define DEV_DMA_STS_SUCC 0 +#define DEV_DMA_STS_BUFF_FLUSH 1 +#define DEV_DMA_STS_BUFF_ERR 3 +#define DEV_DMA_L BIT(27) +#define DEV_DMA_SHORT BIT(26) +#define DEV_DMA_IOC BIT(25) +#define DEV_DMA_SR BIT(24) +#define DEV_DMA_MTRF BIT(23) +#define DEV_DMA_ISOC_PID_MASK (0x3 << 23) +#define DEV_DMA_ISOC_PID_SHIFT 23 +#define DEV_DMA_ISOC_PID_DATA0 0 +#define DEV_DMA_ISOC_PID_DATA2 1 +#define DEV_DMA_ISOC_PID_DATA1 2 +#define DEV_DMA_ISOC_PID_MDATA 3 +#define DEV_DMA_ISOC_FRNUM_MASK (0x7ff << 12) +#define DEV_DMA_ISOC_FRNUM_SHIFT 12 +#define DEV_DMA_ISOC_TX_NBYTES_MASK (0xfff << 0) +#define DEV_DMA_ISOC_TX_NBYTES_LIMIT 0xfff +#define DEV_DMA_ISOC_RX_NBYTES_MASK (0x7ff << 0) +#define DEV_DMA_ISOC_RX_NBYTES_LIMIT 0x7ff +#define DEV_DMA_ISOC_NBYTES_SHIFT 0 +#define DEV_DMA_NBYTES_MASK (0xffff << 0) +#define DEV_DMA_NBYTES_SHIFT 0 +#define DEV_DMA_NBYTES_LIMIT 0xffff + +#define MAX_DMA_DESC_NUM_GENERIC 64 +#define MAX_DMA_DESC_NUM_HS_ISOC 256 + +#endif /* __DWC2_HW_H__ */ diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c new file mode 100644 index 0000000000..93f52e371c --- /dev/null +++ b/drivers/usb/dwc2/params.c @@ -0,0 +1,1001 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2004-2016 Synopsys, Inc. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/usb/of.h> +#include <linux/pci_ids.h> +#include <linux/pci.h> + +#include "core.h" + +#define PCI_PRODUCT_ID_HAPS_HSOTG 0xabc0 +#define PCI_DEVICE_ID_LOONGSON_DWC2 0x7a04 + +static void dwc2_set_bcm_params(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *p = &hsotg->params; + + p->host_rx_fifo_size = 774; + p->max_transfer_size = 65535; + p->max_packet_count = 511; + p->ahbcfg = 0x10; +} + +static void dwc2_set_his_params(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *p = &hsotg->params; + + p->otg_caps.hnp_support = false; + p->otg_caps.srp_support = false; + p->speed = DWC2_SPEED_PARAM_HIGH; + p->host_rx_fifo_size = 512; + p->host_nperio_tx_fifo_size = 512; + p->host_perio_tx_fifo_size = 512; + p->max_transfer_size = 65535; + p->max_packet_count = 511; + p->host_channels = 16; + p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI; + p->phy_utmi_width = 8; + p->i2c_enable = false; + p->reload_ctl = false; + p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << + GAHBCFG_HBSTLEN_SHIFT; + p->change_speed_quirk = true; + p->power_down = DWC2_POWER_DOWN_PARAM_NONE; +} + +static void dwc2_set_jz4775_params(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *p = &hsotg->params; + + p->otg_caps.hnp_support = false; + p->speed = DWC2_SPEED_PARAM_HIGH; + p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI; + p->phy_utmi_width = 16; + p->activate_ingenic_overcurrent_detection = + !device_property_read_bool(hsotg->dev, "disable-over-current"); +} + +static void dwc2_set_loongson_params(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *p = &hsotg->params; + + p->phy_utmi_width = 8; + p->power_down = DWC2_POWER_DOWN_PARAM_PARTIAL; +} + +static void dwc2_set_x1600_params(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *p = &hsotg->params; + + p->otg_caps.hnp_support = false; + p->speed = DWC2_SPEED_PARAM_HIGH; + p->host_channels = 16; + p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI; + p->phy_utmi_width = 16; + p->activate_ingenic_overcurrent_detection = + !device_property_read_bool(hsotg->dev, "disable-over-current"); +} + +static void dwc2_set_x2000_params(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *p = &hsotg->params; + + p->otg_caps.hnp_support = false; + p->speed = DWC2_SPEED_PARAM_HIGH; + p->host_rx_fifo_size = 1024; + p->host_nperio_tx_fifo_size = 1024; + p->host_perio_tx_fifo_size = 1024; + p->host_channels = 16; + p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI; + p->phy_utmi_width = 16; + p->activate_ingenic_overcurrent_detection = + !device_property_read_bool(hsotg->dev, "disable-over-current"); +} + +static void dwc2_set_s3c6400_params(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *p = &hsotg->params; + + p->power_down = DWC2_POWER_DOWN_PARAM_NONE; + p->no_clock_gating = true; + p->phy_utmi_width = 8; +} + +static void dwc2_set_socfpga_agilex_params(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *p = &hsotg->params; + + p->power_down = DWC2_POWER_DOWN_PARAM_NONE; + p->no_clock_gating = true; +} + +static void dwc2_set_rk_params(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *p = &hsotg->params; + + p->otg_caps.hnp_support = false; + p->otg_caps.srp_support = false; + p->host_rx_fifo_size = 525; + p->host_nperio_tx_fifo_size = 128; + p->host_perio_tx_fifo_size = 256; + p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << + GAHBCFG_HBSTLEN_SHIFT; + p->power_down = DWC2_POWER_DOWN_PARAM_NONE; + p->lpm = false; + p->lpm_clock_gating = false; + p->besl = false; + p->hird_threshold_en = false; +} + +static void dwc2_set_ltq_params(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *p = &hsotg->params; + + p->otg_caps.hnp_support = false; + p->otg_caps.srp_support = false; + p->host_rx_fifo_size = 288; + p->host_nperio_tx_fifo_size = 128; + p->host_perio_tx_fifo_size = 96; + p->max_transfer_size = 65535; + p->max_packet_count = 511; + p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << + GAHBCFG_HBSTLEN_SHIFT; +} + +static void dwc2_set_amlogic_params(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *p = &hsotg->params; + + p->otg_caps.hnp_support = false; + p->otg_caps.srp_support = false; + p->speed = DWC2_SPEED_PARAM_HIGH; + p->host_rx_fifo_size = 512; + p->host_nperio_tx_fifo_size = 500; + p->host_perio_tx_fifo_size = 500; + p->host_channels = 16; + p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI; + p->ahbcfg = GAHBCFG_HBSTLEN_INCR8 << + GAHBCFG_HBSTLEN_SHIFT; + p->power_down = DWC2_POWER_DOWN_PARAM_NONE; +} + +static void dwc2_set_amlogic_g12a_params(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *p = &hsotg->params; + + p->lpm = false; + p->lpm_clock_gating = false; + p->besl = false; + p->hird_threshold_en = false; +} + +static void dwc2_set_amlogic_a1_params(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *p = &hsotg->params; + + p->otg_caps.hnp_support = false; + p->otg_caps.srp_support = false; + p->speed = DWC2_SPEED_PARAM_HIGH; + p->host_rx_fifo_size = 192; + p->host_nperio_tx_fifo_size = 128; + p->host_perio_tx_fifo_size = 128; + p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI; + p->phy_utmi_width = 8; + p->ahbcfg = GAHBCFG_HBSTLEN_INCR8 << GAHBCFG_HBSTLEN_SHIFT; + p->lpm = false; + p->lpm_clock_gating = false; + p->besl = false; + p->hird_threshold_en = false; +} + +static void dwc2_set_amcc_params(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *p = &hsotg->params; + + p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT; +} + +static void dwc2_set_stm32f4x9_fsotg_params(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *p = &hsotg->params; + + p->otg_caps.hnp_support = false; + p->otg_caps.srp_support = false; + p->speed = DWC2_SPEED_PARAM_FULL; + p->host_rx_fifo_size = 128; + p->host_nperio_tx_fifo_size = 96; + p->host_perio_tx_fifo_size = 96; + p->max_packet_count = 256; + p->phy_type = DWC2_PHY_TYPE_PARAM_FS; + p->i2c_enable = false; + p->activate_stm_fs_transceiver = true; +} + +static void dwc2_set_stm32f7_hsotg_params(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *p = &hsotg->params; + + p->host_rx_fifo_size = 622; + p->host_nperio_tx_fifo_size = 128; + p->host_perio_tx_fifo_size = 256; +} + +static void dwc2_set_stm32mp15_fsotg_params(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *p = &hsotg->params; + + p->otg_caps.hnp_support = false; + p->otg_caps.srp_support = false; + p->otg_caps.otg_rev = 0x200; + p->speed = DWC2_SPEED_PARAM_FULL; + p->host_rx_fifo_size = 128; + p->host_nperio_tx_fifo_size = 96; + p->host_perio_tx_fifo_size = 96; + p->max_packet_count = 256; + p->phy_type = DWC2_PHY_TYPE_PARAM_FS; + p->i2c_enable = false; + p->activate_stm_fs_transceiver = true; + p->activate_stm_id_vb_detection = true; + p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT; + p->power_down = DWC2_POWER_DOWN_PARAM_NONE; + p->host_support_fs_ls_low_power = true; + p->host_ls_low_power_phy_clk = true; +} + +static void dwc2_set_stm32mp15_hsotg_params(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *p = &hsotg->params; + + p->otg_caps.hnp_support = false; + p->otg_caps.srp_support = false; + p->otg_caps.otg_rev = 0x200; + p->activate_stm_id_vb_detection = !device_property_read_bool(hsotg->dev, "usb-role-switch"); + p->host_rx_fifo_size = 440; + p->host_nperio_tx_fifo_size = 256; + p->host_perio_tx_fifo_size = 256; + p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT; + p->power_down = DWC2_POWER_DOWN_PARAM_NONE; + p->lpm = false; + p->lpm_clock_gating = false; + p->besl = false; + p->hird_threshold_en = false; +} + +const struct of_device_id dwc2_of_match_table[] = { + { .compatible = "brcm,bcm2835-usb", .data = dwc2_set_bcm_params }, + { .compatible = "hisilicon,hi6220-usb", .data = dwc2_set_his_params }, + { .compatible = "ingenic,jz4775-otg", .data = dwc2_set_jz4775_params }, + { .compatible = "ingenic,jz4780-otg", .data = dwc2_set_jz4775_params }, + { .compatible = "ingenic,x1000-otg", .data = dwc2_set_jz4775_params }, + { .compatible = "ingenic,x1600-otg", .data = dwc2_set_x1600_params }, + { .compatible = "ingenic,x1700-otg", .data = dwc2_set_x1600_params }, + { .compatible = "ingenic,x1830-otg", .data = dwc2_set_x1600_params }, + { .compatible = "ingenic,x2000-otg", .data = dwc2_set_x2000_params }, + { .compatible = "rockchip,rk3066-usb", .data = dwc2_set_rk_params }, + { .compatible = "lantiq,arx100-usb", .data = dwc2_set_ltq_params }, + { .compatible = "lantiq,xrx200-usb", .data = dwc2_set_ltq_params }, + { .compatible = "snps,dwc2" }, + { .compatible = "samsung,s3c6400-hsotg", + .data = dwc2_set_s3c6400_params }, + { .compatible = "amlogic,meson8-usb", + .data = dwc2_set_amlogic_params }, + { .compatible = "amlogic,meson8b-usb", + .data = dwc2_set_amlogic_params }, + { .compatible = "amlogic,meson-gxbb-usb", + .data = dwc2_set_amlogic_params }, + { .compatible = "amlogic,meson-g12a-usb", + .data = dwc2_set_amlogic_g12a_params }, + { .compatible = "amlogic,meson-a1-usb", + .data = dwc2_set_amlogic_a1_params }, + { .compatible = "amcc,dwc-otg", .data = dwc2_set_amcc_params }, + { .compatible = "apm,apm82181-dwc-otg", .data = dwc2_set_amcc_params }, + { .compatible = "st,stm32f4x9-fsotg", + .data = dwc2_set_stm32f4x9_fsotg_params }, + { .compatible = "st,stm32f4x9-hsotg" }, + { .compatible = "st,stm32f7-hsotg", + .data = dwc2_set_stm32f7_hsotg_params }, + { .compatible = "st,stm32mp15-fsotg", + .data = dwc2_set_stm32mp15_fsotg_params }, + { .compatible = "st,stm32mp15-hsotg", + .data = dwc2_set_stm32mp15_hsotg_params }, + { .compatible = "intel,socfpga-agilex-hsotg", + .data = dwc2_set_socfpga_agilex_params }, + {}, +}; +MODULE_DEVICE_TABLE(of, dwc2_of_match_table); + +const struct acpi_device_id dwc2_acpi_match[] = { + { "BCM2848", (kernel_ulong_t)dwc2_set_bcm_params }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, dwc2_acpi_match); + +const struct pci_device_id dwc2_pci_ids[] = { + { + PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS, PCI_PRODUCT_ID_HAPS_HSOTG), + }, + { + PCI_DEVICE(PCI_VENDOR_ID_STMICRO, + PCI_DEVICE_ID_STMICRO_USB_OTG), + }, + { + PCI_DEVICE(PCI_VENDOR_ID_LOONGSON, PCI_DEVICE_ID_LOONGSON_DWC2), + .driver_data = (unsigned long)dwc2_set_loongson_params, + }, + { /* end: all zeroes */ } +}; +MODULE_DEVICE_TABLE(pci, dwc2_pci_ids); +EXPORT_SYMBOL_GPL(dwc2_pci_ids); + +static void dwc2_set_param_otg_cap(struct dwc2_hsotg *hsotg) +{ + switch (hsotg->hw_params.op_mode) { + case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE: + hsotg->params.otg_caps.hnp_support = true; + hsotg->params.otg_caps.srp_support = true; + break; + case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE: + case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE: + case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST: + hsotg->params.otg_caps.hnp_support = false; + hsotg->params.otg_caps.srp_support = true; + break; + default: + hsotg->params.otg_caps.hnp_support = false; + hsotg->params.otg_caps.srp_support = false; + break; + } +} + +static void dwc2_set_param_phy_type(struct dwc2_hsotg *hsotg) +{ + int val; + u32 hs_phy_type = hsotg->hw_params.hs_phy_type; + + val = DWC2_PHY_TYPE_PARAM_FS; + if (hs_phy_type != GHWCFG2_HS_PHY_TYPE_NOT_SUPPORTED) { + if (hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI || + hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI_ULPI) + val = DWC2_PHY_TYPE_PARAM_UTMI; + else + val = DWC2_PHY_TYPE_PARAM_ULPI; + } + + if (dwc2_is_fs_iot(hsotg)) + hsotg->params.phy_type = DWC2_PHY_TYPE_PARAM_FS; + + hsotg->params.phy_type = val; +} + +static void dwc2_set_param_speed(struct dwc2_hsotg *hsotg) +{ + int val; + + val = hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS ? + DWC2_SPEED_PARAM_FULL : DWC2_SPEED_PARAM_HIGH; + + if (dwc2_is_fs_iot(hsotg)) + val = DWC2_SPEED_PARAM_FULL; + + if (dwc2_is_hs_iot(hsotg)) + val = DWC2_SPEED_PARAM_HIGH; + + hsotg->params.speed = val; +} + +static void dwc2_set_param_phy_utmi_width(struct dwc2_hsotg *hsotg) +{ + int val; + + val = (hsotg->hw_params.utmi_phy_data_width == + GHWCFG4_UTMI_PHY_DATA_WIDTH_8) ? 8 : 16; + + if (hsotg->phy) { + /* + * If using the generic PHY framework, check if the PHY bus + * width is 8-bit and set the phyif appropriately. + */ + if (phy_get_bus_width(hsotg->phy) == 8) + val = 8; + } + + hsotg->params.phy_utmi_width = val; +} + +static void dwc2_set_param_tx_fifo_sizes(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *p = &hsotg->params; + int depth_average; + int fifo_count; + int i; + + fifo_count = dwc2_hsotg_tx_fifo_count(hsotg); + + memset(p->g_tx_fifo_size, 0, sizeof(p->g_tx_fifo_size)); + depth_average = dwc2_hsotg_tx_fifo_average_depth(hsotg); + for (i = 1; i <= fifo_count; i++) + p->g_tx_fifo_size[i] = depth_average; +} + +static void dwc2_set_param_power_down(struct dwc2_hsotg *hsotg) +{ + int val; + + if (hsotg->hw_params.hibernation) + val = DWC2_POWER_DOWN_PARAM_HIBERNATION; + else if (hsotg->hw_params.power_optimized) + val = DWC2_POWER_DOWN_PARAM_PARTIAL; + else + val = DWC2_POWER_DOWN_PARAM_NONE; + + hsotg->params.power_down = val; +} + +static void dwc2_set_param_lpm(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *p = &hsotg->params; + + p->lpm = hsotg->hw_params.lpm_mode; + if (p->lpm) { + p->lpm_clock_gating = true; + p->besl = true; + p->hird_threshold_en = true; + p->hird_threshold = 4; + } else { + p->lpm_clock_gating = false; + p->besl = false; + p->hird_threshold_en = false; + } +} + +/** + * dwc2_set_default_params() - Set all core parameters to their + * auto-detected default values. + * + * @hsotg: Programming view of the DWC_otg controller + * + */ +static void dwc2_set_default_params(struct dwc2_hsotg *hsotg) +{ + struct dwc2_hw_params *hw = &hsotg->hw_params; + struct dwc2_core_params *p = &hsotg->params; + bool dma_capable = !(hw->arch == GHWCFG2_SLAVE_ONLY_ARCH); + + dwc2_set_param_otg_cap(hsotg); + dwc2_set_param_phy_type(hsotg); + dwc2_set_param_speed(hsotg); + dwc2_set_param_phy_utmi_width(hsotg); + dwc2_set_param_power_down(hsotg); + dwc2_set_param_lpm(hsotg); + p->phy_ulpi_ddr = false; + p->phy_ulpi_ext_vbus = false; + + p->enable_dynamic_fifo = hw->enable_dynamic_fifo; + p->en_multiple_tx_fifo = hw->en_multiple_tx_fifo; + p->i2c_enable = hw->i2c_enable; + p->acg_enable = hw->acg_enable; + p->ulpi_fs_ls = false; + p->ts_dline = false; + p->reload_ctl = (hw->snpsid >= DWC2_CORE_REV_2_92a); + p->uframe_sched = true; + p->external_id_pin_ctl = false; + p->ipg_isoc_en = false; + p->service_interval = false; + p->max_packet_count = hw->max_packet_count; + p->max_transfer_size = hw->max_transfer_size; + p->ahbcfg = GAHBCFG_HBSTLEN_INCR << GAHBCFG_HBSTLEN_SHIFT; + p->ref_clk_per = 33333; + p->sof_cnt_wkup_alert = 100; + + if ((hsotg->dr_mode == USB_DR_MODE_HOST) || + (hsotg->dr_mode == USB_DR_MODE_OTG)) { + p->host_dma = dma_capable; + p->dma_desc_enable = false; + p->dma_desc_fs_enable = false; + p->host_support_fs_ls_low_power = false; + p->host_ls_low_power_phy_clk = false; + p->host_channels = hw->host_channels; + p->host_rx_fifo_size = hw->rx_fifo_size; + p->host_nperio_tx_fifo_size = hw->host_nperio_tx_fifo_size; + p->host_perio_tx_fifo_size = hw->host_perio_tx_fifo_size; + } + + if ((hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) || + (hsotg->dr_mode == USB_DR_MODE_OTG)) { + p->g_dma = dma_capable; + p->g_dma_desc = hw->dma_desc_enable; + + /* + * The values for g_rx_fifo_size (2048) and + * g_np_tx_fifo_size (1024) come from the legacy s3c + * gadget driver. These defaults have been hard-coded + * for some time so many platforms depend on these + * values. Leave them as defaults for now and only + * auto-detect if the hardware does not support the + * default. + */ + p->g_rx_fifo_size = 2048; + p->g_np_tx_fifo_size = 1024; + dwc2_set_param_tx_fifo_sizes(hsotg); + } +} + +/** + * dwc2_get_device_properties() - Read in device properties. + * + * @hsotg: Programming view of the DWC_otg controller + * + * Read in the device properties and adjust core parameters if needed. + */ +static void dwc2_get_device_properties(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *p = &hsotg->params; + int num; + + if ((hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) || + (hsotg->dr_mode == USB_DR_MODE_OTG)) { + device_property_read_u32(hsotg->dev, "g-rx-fifo-size", + &p->g_rx_fifo_size); + + device_property_read_u32(hsotg->dev, "g-np-tx-fifo-size", + &p->g_np_tx_fifo_size); + + num = device_property_count_u32(hsotg->dev, "g-tx-fifo-size"); + if (num > 0) { + num = min(num, 15); + memset(p->g_tx_fifo_size, 0, + sizeof(p->g_tx_fifo_size)); + device_property_read_u32_array(hsotg->dev, + "g-tx-fifo-size", + &p->g_tx_fifo_size[1], + num); + } + + of_usb_update_otg_caps(hsotg->dev->of_node, &p->otg_caps); + } + + p->oc_disable = of_property_read_bool(hsotg->dev->of_node, "disable-over-current"); +} + +static void dwc2_check_param_otg_cap(struct dwc2_hsotg *hsotg) +{ + int valid = 1; + + if (hsotg->params.otg_caps.hnp_support && hsotg->params.otg_caps.srp_support) { + /* check HNP && SRP capable */ + if (hsotg->hw_params.op_mode != GHWCFG2_OP_MODE_HNP_SRP_CAPABLE) + valid = 0; + } else if (!hsotg->params.otg_caps.hnp_support) { + /* check SRP only capable */ + if (hsotg->params.otg_caps.srp_support) { + switch (hsotg->hw_params.op_mode) { + case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE: + case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE: + case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE: + case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST: + break; + default: + valid = 0; + break; + } + } + /* else: NO HNP && NO SRP capable: always valid */ + } else { + valid = 0; + } + + if (!valid) + dwc2_set_param_otg_cap(hsotg); +} + +static void dwc2_check_param_phy_type(struct dwc2_hsotg *hsotg) +{ + int valid = 0; + u32 hs_phy_type; + u32 fs_phy_type; + + hs_phy_type = hsotg->hw_params.hs_phy_type; + fs_phy_type = hsotg->hw_params.fs_phy_type; + + switch (hsotg->params.phy_type) { + case DWC2_PHY_TYPE_PARAM_FS: + if (fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED) + valid = 1; + break; + case DWC2_PHY_TYPE_PARAM_UTMI: + if ((hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI) || + (hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI_ULPI)) + valid = 1; + break; + case DWC2_PHY_TYPE_PARAM_ULPI: + if ((hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI) || + (hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI_ULPI)) + valid = 1; + break; + default: + break; + } + + if (!valid) + dwc2_set_param_phy_type(hsotg); +} + +static void dwc2_check_param_speed(struct dwc2_hsotg *hsotg) +{ + int valid = 1; + int phy_type = hsotg->params.phy_type; + int speed = hsotg->params.speed; + + switch (speed) { + case DWC2_SPEED_PARAM_HIGH: + if ((hsotg->params.speed == DWC2_SPEED_PARAM_HIGH) && + (phy_type == DWC2_PHY_TYPE_PARAM_FS)) + valid = 0; + break; + case DWC2_SPEED_PARAM_FULL: + case DWC2_SPEED_PARAM_LOW: + break; + default: + valid = 0; + break; + } + + if (!valid) + dwc2_set_param_speed(hsotg); +} + +static void dwc2_check_param_phy_utmi_width(struct dwc2_hsotg *hsotg) +{ + int valid = 0; + int param = hsotg->params.phy_utmi_width; + int width = hsotg->hw_params.utmi_phy_data_width; + + switch (width) { + case GHWCFG4_UTMI_PHY_DATA_WIDTH_8: + valid = (param == 8); + break; + case GHWCFG4_UTMI_PHY_DATA_WIDTH_16: + valid = (param == 16); + break; + case GHWCFG4_UTMI_PHY_DATA_WIDTH_8_OR_16: + valid = (param == 8 || param == 16); + break; + } + + if (!valid) + dwc2_set_param_phy_utmi_width(hsotg); +} + +static void dwc2_check_param_power_down(struct dwc2_hsotg *hsotg) +{ + int param = hsotg->params.power_down; + + switch (param) { + case DWC2_POWER_DOWN_PARAM_NONE: + break; + case DWC2_POWER_DOWN_PARAM_PARTIAL: + if (hsotg->hw_params.power_optimized) + break; + dev_dbg(hsotg->dev, + "Partial power down isn't supported by HW\n"); + param = DWC2_POWER_DOWN_PARAM_NONE; + break; + case DWC2_POWER_DOWN_PARAM_HIBERNATION: + if (hsotg->hw_params.hibernation) + break; + dev_dbg(hsotg->dev, + "Hibernation isn't supported by HW\n"); + param = DWC2_POWER_DOWN_PARAM_NONE; + break; + default: + dev_err(hsotg->dev, + "%s: Invalid parameter power_down=%d\n", + __func__, param); + param = DWC2_POWER_DOWN_PARAM_NONE; + break; + } + + hsotg->params.power_down = param; +} + +static void dwc2_check_param_tx_fifo_sizes(struct dwc2_hsotg *hsotg) +{ + int fifo_count; + int fifo; + int min; + u32 total = 0; + u32 dptxfszn; + + fifo_count = dwc2_hsotg_tx_fifo_count(hsotg); + min = hsotg->hw_params.en_multiple_tx_fifo ? 16 : 4; + + for (fifo = 1; fifo <= fifo_count; fifo++) + total += hsotg->params.g_tx_fifo_size[fifo]; + + if (total > dwc2_hsotg_tx_fifo_total_depth(hsotg) || !total) { + dev_warn(hsotg->dev, "%s: Invalid parameter g-tx-fifo-size, setting to default average\n", + __func__); + dwc2_set_param_tx_fifo_sizes(hsotg); + } + + for (fifo = 1; fifo <= fifo_count; fifo++) { + dptxfszn = hsotg->hw_params.g_tx_fifo_size[fifo]; + + if (hsotg->params.g_tx_fifo_size[fifo] < min || + hsotg->params.g_tx_fifo_size[fifo] > dptxfszn) { + dev_warn(hsotg->dev, "%s: Invalid parameter g_tx_fifo_size[%d]=%d\n", + __func__, fifo, + hsotg->params.g_tx_fifo_size[fifo]); + hsotg->params.g_tx_fifo_size[fifo] = dptxfszn; + } + } +} + +#define CHECK_RANGE(_param, _min, _max, _def) do { \ + if ((int)(hsotg->params._param) < (_min) || \ + (hsotg->params._param) > (_max)) { \ + dev_warn(hsotg->dev, "%s: Invalid parameter %s=%d\n", \ + __func__, #_param, hsotg->params._param); \ + hsotg->params._param = (_def); \ + } \ + } while (0) + +#define CHECK_BOOL(_param, _check) do { \ + if (hsotg->params._param && !(_check)) { \ + dev_warn(hsotg->dev, "%s: Invalid parameter %s=%d\n", \ + __func__, #_param, hsotg->params._param); \ + hsotg->params._param = false; \ + } \ + } while (0) + +static void dwc2_check_params(struct dwc2_hsotg *hsotg) +{ + struct dwc2_hw_params *hw = &hsotg->hw_params; + struct dwc2_core_params *p = &hsotg->params; + bool dma_capable = !(hw->arch == GHWCFG2_SLAVE_ONLY_ARCH); + + dwc2_check_param_otg_cap(hsotg); + dwc2_check_param_phy_type(hsotg); + dwc2_check_param_speed(hsotg); + dwc2_check_param_phy_utmi_width(hsotg); + dwc2_check_param_power_down(hsotg); + CHECK_BOOL(enable_dynamic_fifo, hw->enable_dynamic_fifo); + CHECK_BOOL(en_multiple_tx_fifo, hw->en_multiple_tx_fifo); + CHECK_BOOL(i2c_enable, hw->i2c_enable); + CHECK_BOOL(ipg_isoc_en, hw->ipg_isoc_en); + CHECK_BOOL(acg_enable, hw->acg_enable); + CHECK_BOOL(reload_ctl, (hsotg->hw_params.snpsid > DWC2_CORE_REV_2_92a)); + CHECK_BOOL(lpm, (hsotg->hw_params.snpsid >= DWC2_CORE_REV_2_80a)); + CHECK_BOOL(lpm, hw->lpm_mode); + CHECK_BOOL(lpm_clock_gating, hsotg->params.lpm); + CHECK_BOOL(besl, hsotg->params.lpm); + CHECK_BOOL(besl, (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a)); + CHECK_BOOL(hird_threshold_en, hsotg->params.lpm); + CHECK_RANGE(hird_threshold, 0, hsotg->params.besl ? 12 : 7, 0); + CHECK_BOOL(service_interval, hw->service_interval_mode); + CHECK_RANGE(max_packet_count, + 15, hw->max_packet_count, + hw->max_packet_count); + CHECK_RANGE(max_transfer_size, + 2047, hw->max_transfer_size, + hw->max_transfer_size); + + if ((hsotg->dr_mode == USB_DR_MODE_HOST) || + (hsotg->dr_mode == USB_DR_MODE_OTG)) { + CHECK_BOOL(host_dma, dma_capable); + CHECK_BOOL(dma_desc_enable, p->host_dma); + CHECK_BOOL(dma_desc_fs_enable, p->dma_desc_enable); + CHECK_BOOL(host_ls_low_power_phy_clk, + p->phy_type == DWC2_PHY_TYPE_PARAM_FS); + CHECK_RANGE(host_channels, + 1, hw->host_channels, + hw->host_channels); + CHECK_RANGE(host_rx_fifo_size, + 16, hw->rx_fifo_size, + hw->rx_fifo_size); + CHECK_RANGE(host_nperio_tx_fifo_size, + 16, hw->host_nperio_tx_fifo_size, + hw->host_nperio_tx_fifo_size); + CHECK_RANGE(host_perio_tx_fifo_size, + 16, hw->host_perio_tx_fifo_size, + hw->host_perio_tx_fifo_size); + } + + if ((hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) || + (hsotg->dr_mode == USB_DR_MODE_OTG)) { + CHECK_BOOL(g_dma, dma_capable); + CHECK_BOOL(g_dma_desc, (p->g_dma && hw->dma_desc_enable)); + CHECK_RANGE(g_rx_fifo_size, + 16, hw->rx_fifo_size, + hw->rx_fifo_size); + CHECK_RANGE(g_np_tx_fifo_size, + 16, hw->dev_nperio_tx_fifo_size, + hw->dev_nperio_tx_fifo_size); + dwc2_check_param_tx_fifo_sizes(hsotg); + } +} + +/* + * Gets host hardware parameters. Forces host mode if not currently in + * host mode. Should be called immediately after a core soft reset in + * order to get the reset values. + */ +static void dwc2_get_host_hwparams(struct dwc2_hsotg *hsotg) +{ + struct dwc2_hw_params *hw = &hsotg->hw_params; + u32 gnptxfsiz; + u32 hptxfsiz; + + if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) + return; + + dwc2_force_mode(hsotg, true); + + gnptxfsiz = dwc2_readl(hsotg, GNPTXFSIZ); + hptxfsiz = dwc2_readl(hsotg, HPTXFSIZ); + + hw->host_nperio_tx_fifo_size = (gnptxfsiz & FIFOSIZE_DEPTH_MASK) >> + FIFOSIZE_DEPTH_SHIFT; + hw->host_perio_tx_fifo_size = (hptxfsiz & FIFOSIZE_DEPTH_MASK) >> + FIFOSIZE_DEPTH_SHIFT; +} + +/* + * Gets device hardware parameters. Forces device mode if not + * currently in device mode. Should be called immediately after a core + * soft reset in order to get the reset values. + */ +static void dwc2_get_dev_hwparams(struct dwc2_hsotg *hsotg) +{ + struct dwc2_hw_params *hw = &hsotg->hw_params; + u32 gnptxfsiz; + int fifo, fifo_count; + + if (hsotg->dr_mode == USB_DR_MODE_HOST) + return; + + dwc2_force_mode(hsotg, false); + + gnptxfsiz = dwc2_readl(hsotg, GNPTXFSIZ); + + fifo_count = dwc2_hsotg_tx_fifo_count(hsotg); + + for (fifo = 1; fifo <= fifo_count; fifo++) { + hw->g_tx_fifo_size[fifo] = + (dwc2_readl(hsotg, DPTXFSIZN(fifo)) & + FIFOSIZE_DEPTH_MASK) >> FIFOSIZE_DEPTH_SHIFT; + } + + hw->dev_nperio_tx_fifo_size = (gnptxfsiz & FIFOSIZE_DEPTH_MASK) >> + FIFOSIZE_DEPTH_SHIFT; +} + +/** + * dwc2_get_hwparams() - During device initialization, read various hardware + * configuration registers and interpret the contents. + * + * @hsotg: Programming view of the DWC_otg controller + * + */ +int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) +{ + struct dwc2_hw_params *hw = &hsotg->hw_params; + unsigned int width; + u32 hwcfg1, hwcfg2, hwcfg3, hwcfg4; + u32 grxfsiz; + + hwcfg1 = dwc2_readl(hsotg, GHWCFG1); + hwcfg2 = dwc2_readl(hsotg, GHWCFG2); + hwcfg3 = dwc2_readl(hsotg, GHWCFG3); + hwcfg4 = dwc2_readl(hsotg, GHWCFG4); + grxfsiz = dwc2_readl(hsotg, GRXFSIZ); + + /* hwcfg1 */ + hw->dev_ep_dirs = hwcfg1; + + /* hwcfg2 */ + hw->op_mode = (hwcfg2 & GHWCFG2_OP_MODE_MASK) >> + GHWCFG2_OP_MODE_SHIFT; + hw->arch = (hwcfg2 & GHWCFG2_ARCHITECTURE_MASK) >> + GHWCFG2_ARCHITECTURE_SHIFT; + hw->enable_dynamic_fifo = !!(hwcfg2 & GHWCFG2_DYNAMIC_FIFO); + hw->host_channels = 1 + ((hwcfg2 & GHWCFG2_NUM_HOST_CHAN_MASK) >> + GHWCFG2_NUM_HOST_CHAN_SHIFT); + hw->hs_phy_type = (hwcfg2 & GHWCFG2_HS_PHY_TYPE_MASK) >> + GHWCFG2_HS_PHY_TYPE_SHIFT; + hw->fs_phy_type = (hwcfg2 & GHWCFG2_FS_PHY_TYPE_MASK) >> + GHWCFG2_FS_PHY_TYPE_SHIFT; + hw->num_dev_ep = (hwcfg2 & GHWCFG2_NUM_DEV_EP_MASK) >> + GHWCFG2_NUM_DEV_EP_SHIFT; + hw->nperio_tx_q_depth = + (hwcfg2 & GHWCFG2_NONPERIO_TX_Q_DEPTH_MASK) >> + GHWCFG2_NONPERIO_TX_Q_DEPTH_SHIFT << 1; + hw->host_perio_tx_q_depth = + (hwcfg2 & GHWCFG2_HOST_PERIO_TX_Q_DEPTH_MASK) >> + GHWCFG2_HOST_PERIO_TX_Q_DEPTH_SHIFT << 1; + hw->dev_token_q_depth = + (hwcfg2 & GHWCFG2_DEV_TOKEN_Q_DEPTH_MASK) >> + GHWCFG2_DEV_TOKEN_Q_DEPTH_SHIFT; + + /* hwcfg3 */ + width = (hwcfg3 & GHWCFG3_XFER_SIZE_CNTR_WIDTH_MASK) >> + GHWCFG3_XFER_SIZE_CNTR_WIDTH_SHIFT; + hw->max_transfer_size = (1 << (width + 11)) - 1; + width = (hwcfg3 & GHWCFG3_PACKET_SIZE_CNTR_WIDTH_MASK) >> + GHWCFG3_PACKET_SIZE_CNTR_WIDTH_SHIFT; + hw->max_packet_count = (1 << (width + 4)) - 1; + hw->i2c_enable = !!(hwcfg3 & GHWCFG3_I2C); + hw->total_fifo_size = (hwcfg3 & GHWCFG3_DFIFO_DEPTH_MASK) >> + GHWCFG3_DFIFO_DEPTH_SHIFT; + hw->lpm_mode = !!(hwcfg3 & GHWCFG3_OTG_LPM_EN); + + /* hwcfg4 */ + hw->en_multiple_tx_fifo = !!(hwcfg4 & GHWCFG4_DED_FIFO_EN); + hw->num_dev_perio_in_ep = (hwcfg4 & GHWCFG4_NUM_DEV_PERIO_IN_EP_MASK) >> + GHWCFG4_NUM_DEV_PERIO_IN_EP_SHIFT; + hw->num_dev_in_eps = (hwcfg4 & GHWCFG4_NUM_IN_EPS_MASK) >> + GHWCFG4_NUM_IN_EPS_SHIFT; + hw->dma_desc_enable = !!(hwcfg4 & GHWCFG4_DESC_DMA); + hw->power_optimized = !!(hwcfg4 & GHWCFG4_POWER_OPTIMIZ); + hw->hibernation = !!(hwcfg4 & GHWCFG4_HIBER); + hw->utmi_phy_data_width = (hwcfg4 & GHWCFG4_UTMI_PHY_DATA_WIDTH_MASK) >> + GHWCFG4_UTMI_PHY_DATA_WIDTH_SHIFT; + hw->acg_enable = !!(hwcfg4 & GHWCFG4_ACG_SUPPORTED); + hw->ipg_isoc_en = !!(hwcfg4 & GHWCFG4_IPG_ISOC_SUPPORTED); + hw->service_interval_mode = !!(hwcfg4 & + GHWCFG4_SERVICE_INTERVAL_SUPPORTED); + + /* fifo sizes */ + hw->rx_fifo_size = (grxfsiz & GRXFSIZ_DEPTH_MASK) >> + GRXFSIZ_DEPTH_SHIFT; + /* + * Host specific hardware parameters. Reading these parameters + * requires the controller to be in host mode. The mode will + * be forced, if necessary, to read these values. + */ + dwc2_get_host_hwparams(hsotg); + dwc2_get_dev_hwparams(hsotg); + + return 0; +} + +typedef void (*set_params_cb)(struct dwc2_hsotg *data); + +int dwc2_init_params(struct dwc2_hsotg *hsotg) +{ + const struct of_device_id *match; + set_params_cb set_params; + + dwc2_set_default_params(hsotg); + dwc2_get_device_properties(hsotg); + + match = of_match_device(dwc2_of_match_table, hsotg->dev); + if (match && match->data) { + set_params = match->data; + set_params(hsotg); + } else if (!match) { + const struct acpi_device_id *amatch; + const struct pci_device_id *pmatch = NULL; + + amatch = acpi_match_device(dwc2_acpi_match, hsotg->dev); + if (amatch && amatch->driver_data) { + set_params = (set_params_cb)amatch->driver_data; + set_params(hsotg); + } else if (!amatch) + pmatch = pci_match_id(dwc2_pci_ids, to_pci_dev(hsotg->dev->parent)); + + if (pmatch && pmatch->driver_data) { + set_params = (set_params_cb)pmatch->driver_data; + set_params(hsotg); + } + } + + dwc2_check_params(hsotg); + + return 0; +} diff --git a/drivers/usb/dwc2/pci.c b/drivers/usb/dwc2/pci.c new file mode 100644 index 0000000000..f3a1e4232a --- /dev/null +++ b/drivers/usb/dwc2/pci.c @@ -0,0 +1,136 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * pci.c - DesignWare HS OTG Controller PCI driver + * + * Copyright (C) 2004-2013 Synopsys, Inc. + */ + +/* + * Provides the initialization and cleanup entry points for the DWC_otg PCI + * driver + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/pci.h> +#include <linux/usb.h> + +#include <linux/usb/hcd.h> +#include <linux/usb/ch11.h> +#include <linux/platform_device.h> +#include <linux/usb/usb_phy_generic.h> + +#include "core.h" + +static const char dwc2_driver_name[] = "dwc2-pci"; + +struct dwc2_pci_glue { + struct platform_device *dwc2; + struct platform_device *phy; +}; + +/** + * dwc2_pci_remove() - Provides the cleanup entry points for the DWC_otg PCI + * driver + * + * @pci: The programming view of DWC_otg PCI + */ +static void dwc2_pci_remove(struct pci_dev *pci) +{ + struct dwc2_pci_glue *glue = pci_get_drvdata(pci); + + platform_device_unregister(glue->dwc2); + usb_phy_generic_unregister(glue->phy); + pci_set_drvdata(pci, NULL); +} + +static int dwc2_pci_probe(struct pci_dev *pci, + const struct pci_device_id *id) +{ + struct resource res[2]; + struct platform_device *dwc2; + struct platform_device *phy; + int ret; + struct device *dev = &pci->dev; + struct dwc2_pci_glue *glue; + + ret = pcim_enable_device(pci); + if (ret) { + dev_err(dev, "failed to enable pci device\n"); + return -ENODEV; + } + + pci_set_master(pci); + + phy = usb_phy_generic_register(); + if (IS_ERR(phy)) { + dev_err(dev, "error registering generic PHY (%ld)\n", + PTR_ERR(phy)); + return PTR_ERR(phy); + } + + dwc2 = platform_device_alloc("dwc2", PLATFORM_DEVID_AUTO); + if (!dwc2) { + dev_err(dev, "couldn't allocate dwc2 device\n"); + ret = -ENOMEM; + goto err; + } + + memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res)); + + res[0].start = pci_resource_start(pci, 0); + res[0].end = pci_resource_end(pci, 0); + res[0].name = "dwc2"; + res[0].flags = IORESOURCE_MEM; + + res[1].start = pci->irq; + res[1].name = "dwc2"; + res[1].flags = IORESOURCE_IRQ; + + ret = platform_device_add_resources(dwc2, res, ARRAY_SIZE(res)); + if (ret) { + dev_err(dev, "couldn't add resources to dwc2 device\n"); + goto err; + } + + dwc2->dev.parent = dev; + + glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL); + if (!glue) { + ret = -ENOMEM; + goto err; + } + + ret = platform_device_add(dwc2); + if (ret) { + dev_err(dev, "failed to register dwc2 device\n"); + goto err; + } + + glue->phy = phy; + glue->dwc2 = dwc2; + pci_set_drvdata(pci, glue); + + return 0; +err: + usb_phy_generic_unregister(phy); + platform_device_put(dwc2); + return ret; +} + +static struct pci_driver dwc2_pci_driver = { + .name = dwc2_driver_name, + .id_table = dwc2_pci_ids, + .probe = dwc2_pci_probe, + .remove = dwc2_pci_remove, +}; + +module_pci_driver(dwc2_pci_driver); + +MODULE_DESCRIPTION("DESIGNWARE HS OTG PCI Bus Glue"); +MODULE_AUTHOR("Synopsys, Inc."); +MODULE_LICENSE("Dual BSD/GPL"); diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c new file mode 100644 index 0000000000..b1d48019e9 --- /dev/null +++ b/drivers/usb/dwc2/platform.c @@ -0,0 +1,761 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * platform.c - DesignWare HS OTG Controller platform driver + * + * Copyright (C) Matthijs Kooijman <matthijs@stdin.nl> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/of.h> +#include <linux/mutex.h> +#include <linux/platform_device.h> +#include <linux/phy/phy.h> +#include <linux/platform_data/s3c-hsotg.h> +#include <linux/reset.h> + +#include <linux/usb/of.h> + +#include "core.h" +#include "hcd.h" +#include "debug.h" + +static const char dwc2_driver_name[] = "dwc2"; + +/* + * Check the dr_mode against the module configuration and hardware + * capabilities. + * + * The hardware, module, and dr_mode, can each be set to host, device, + * or otg. Check that all these values are compatible and adjust the + * value of dr_mode if possible. + * + * actual + * HW MOD dr_mode dr_mode + * ------------------------------ + * HST HST any : HST + * HST DEV any : --- + * HST OTG any : HST + * + * DEV HST any : --- + * DEV DEV any : DEV + * DEV OTG any : DEV + * + * OTG HST any : HST + * OTG DEV any : DEV + * OTG OTG any : dr_mode + */ +static int dwc2_get_dr_mode(struct dwc2_hsotg *hsotg) +{ + enum usb_dr_mode mode; + + hsotg->dr_mode = usb_get_dr_mode(hsotg->dev); + if (hsotg->dr_mode == USB_DR_MODE_UNKNOWN) + hsotg->dr_mode = USB_DR_MODE_OTG; + + mode = hsotg->dr_mode; + + if (dwc2_hw_is_device(hsotg)) { + if (IS_ENABLED(CONFIG_USB_DWC2_HOST)) { + dev_err(hsotg->dev, + "Controller does not support host mode.\n"); + return -EINVAL; + } + mode = USB_DR_MODE_PERIPHERAL; + } else if (dwc2_hw_is_host(hsotg)) { + if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL)) { + dev_err(hsotg->dev, + "Controller does not support device mode.\n"); + return -EINVAL; + } + mode = USB_DR_MODE_HOST; + } else { + if (IS_ENABLED(CONFIG_USB_DWC2_HOST)) + mode = USB_DR_MODE_HOST; + else if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL)) + mode = USB_DR_MODE_PERIPHERAL; + } + + if (mode != hsotg->dr_mode) { + dev_warn(hsotg->dev, + "Configuration mismatch. dr_mode forced to %s\n", + mode == USB_DR_MODE_HOST ? "host" : "device"); + + hsotg->dr_mode = mode; + } + + return 0; +} + +static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg) +{ + struct platform_device *pdev = to_platform_device(hsotg->dev); + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies), + hsotg->supplies); + if (ret) + return ret; + + if (hsotg->utmi_clk) { + ret = clk_prepare_enable(hsotg->utmi_clk); + if (ret) + goto err_dis_reg; + } + + if (hsotg->clk) { + ret = clk_prepare_enable(hsotg->clk); + if (ret) + goto err_dis_utmi_clk; + } + + if (hsotg->uphy) { + ret = usb_phy_init(hsotg->uphy); + } else if (hsotg->plat && hsotg->plat->phy_init) { + ret = hsotg->plat->phy_init(pdev, hsotg->plat->phy_type); + } else { + ret = phy_init(hsotg->phy); + if (ret == 0) { + ret = phy_power_on(hsotg->phy); + if (ret) + phy_exit(hsotg->phy); + } + } + + if (ret) + goto err_dis_clk; + + return 0; + +err_dis_clk: + if (hsotg->clk) + clk_disable_unprepare(hsotg->clk); + +err_dis_utmi_clk: + if (hsotg->utmi_clk) + clk_disable_unprepare(hsotg->utmi_clk); + +err_dis_reg: + regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); + + return ret; +} + +/** + * dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources + * @hsotg: The driver state + * + * A wrapper for platform code responsible for controlling + * low-level USB platform resources (phy, clock, regulators) + */ +int dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg) +{ + int ret = __dwc2_lowlevel_hw_enable(hsotg); + + if (ret == 0) + hsotg->ll_hw_enabled = true; + return ret; +} + +static int __dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg) +{ + struct platform_device *pdev = to_platform_device(hsotg->dev); + int ret = 0; + + if (hsotg->uphy) { + usb_phy_shutdown(hsotg->uphy); + } else if (hsotg->plat && hsotg->plat->phy_exit) { + ret = hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type); + } else { + ret = phy_power_off(hsotg->phy); + if (ret == 0) + ret = phy_exit(hsotg->phy); + } + if (ret) + return ret; + + if (hsotg->clk) + clk_disable_unprepare(hsotg->clk); + + if (hsotg->utmi_clk) + clk_disable_unprepare(hsotg->utmi_clk); + + return regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); +} + +/** + * dwc2_lowlevel_hw_disable - disable platform lowlevel hw resources + * @hsotg: The driver state + * + * A wrapper for platform code responsible for controlling + * low-level USB platform resources (phy, clock, regulators) + */ +int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg) +{ + int ret = __dwc2_lowlevel_hw_disable(hsotg); + + if (ret == 0) + hsotg->ll_hw_enabled = false; + return ret; +} + +static void dwc2_reset_control_assert(void *data) +{ + reset_control_assert(data); +} + +static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg) +{ + int i, ret; + + hsotg->reset = devm_reset_control_get_optional(hsotg->dev, "dwc2"); + if (IS_ERR(hsotg->reset)) + return dev_err_probe(hsotg->dev, PTR_ERR(hsotg->reset), + "error getting reset control\n"); + + reset_control_deassert(hsotg->reset); + ret = devm_add_action_or_reset(hsotg->dev, dwc2_reset_control_assert, + hsotg->reset); + if (ret) + return ret; + + hsotg->reset_ecc = devm_reset_control_get_optional(hsotg->dev, "dwc2-ecc"); + if (IS_ERR(hsotg->reset_ecc)) + return dev_err_probe(hsotg->dev, PTR_ERR(hsotg->reset_ecc), + "error getting reset control for ecc\n"); + + reset_control_deassert(hsotg->reset_ecc); + ret = devm_add_action_or_reset(hsotg->dev, dwc2_reset_control_assert, + hsotg->reset_ecc); + if (ret) + return ret; + + /* + * Attempt to find a generic PHY, then look for an old style + * USB PHY and then fall back to pdata + */ + hsotg->phy = devm_phy_get(hsotg->dev, "usb2-phy"); + if (IS_ERR(hsotg->phy)) { + ret = PTR_ERR(hsotg->phy); + switch (ret) { + case -ENODEV: + case -ENOSYS: + hsotg->phy = NULL; + break; + default: + return dev_err_probe(hsotg->dev, ret, "error getting phy\n"); + } + } + + if (!hsotg->phy) { + hsotg->uphy = devm_usb_get_phy(hsotg->dev, USB_PHY_TYPE_USB2); + if (IS_ERR(hsotg->uphy)) { + ret = PTR_ERR(hsotg->uphy); + switch (ret) { + case -ENODEV: + case -ENXIO: + hsotg->uphy = NULL; + break; + default: + return dev_err_probe(hsotg->dev, ret, "error getting usb phy\n"); + } + } + } + + hsotg->plat = dev_get_platdata(hsotg->dev); + + /* Clock */ + hsotg->clk = devm_clk_get_optional(hsotg->dev, "otg"); + if (IS_ERR(hsotg->clk)) + return dev_err_probe(hsotg->dev, PTR_ERR(hsotg->clk), "cannot get otg clock\n"); + + hsotg->utmi_clk = devm_clk_get_optional(hsotg->dev, "utmi"); + if (IS_ERR(hsotg->utmi_clk)) + return dev_err_probe(hsotg->dev, PTR_ERR(hsotg->utmi_clk), + "cannot get utmi clock\n"); + + /* Regulators */ + for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++) + hsotg->supplies[i].supply = dwc2_hsotg_supply_names[i]; + + ret = devm_regulator_bulk_get(hsotg->dev, ARRAY_SIZE(hsotg->supplies), + hsotg->supplies); + if (ret) + return dev_err_probe(hsotg->dev, ret, "failed to request supplies\n"); + + return 0; +} + +/** + * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the + * DWC_otg driver + * + * @dev: Platform device + * + * This routine is called, for example, when the rmmod command is executed. The + * device may or may not be electrically present. If it is present, the driver + * stops device processing. Any resources used on behalf of this device are + * freed. + */ +static void dwc2_driver_remove(struct platform_device *dev) +{ + struct dwc2_hsotg *hsotg = platform_get_drvdata(dev); + struct dwc2_gregs_backup *gr; + int ret = 0; + + gr = &hsotg->gr_backup; + + /* Exit Hibernation when driver is removed. */ + if (hsotg->hibernated) { + if (gr->gotgctl & GOTGCTL_CURMODE_HOST) + ret = dwc2_exit_hibernation(hsotg, 0, 0, 1); + else + ret = dwc2_exit_hibernation(hsotg, 0, 0, 0); + + if (ret) + dev_err(hsotg->dev, + "exit hibernation failed.\n"); + } + + /* Exit Partial Power Down when driver is removed. */ + if (hsotg->in_ppd) { + ret = dwc2_exit_partial_power_down(hsotg, 0, true); + if (ret) + dev_err(hsotg->dev, + "exit partial_power_down failed\n"); + } + + /* Exit clock gating when driver is removed. */ + if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_NONE && + hsotg->bus_suspended) { + if (dwc2_is_device_mode(hsotg)) + dwc2_gadget_exit_clock_gating(hsotg, 0); + else + dwc2_host_exit_clock_gating(hsotg, 0); + } + + dwc2_debugfs_exit(hsotg); + if (hsotg->hcd_enabled) + dwc2_hcd_remove(hsotg); + if (hsotg->gadget_enabled) + dwc2_hsotg_remove(hsotg); + + dwc2_drd_exit(hsotg); + + if (hsotg->params.activate_stm_id_vb_detection) + regulator_disable(hsotg->usb33d); + + if (hsotg->ll_hw_enabled) + dwc2_lowlevel_hw_disable(hsotg); +} + +/** + * dwc2_driver_shutdown() - Called on device shutdown + * + * @dev: Platform device + * + * In specific conditions (involving usb hubs) dwc2 devices can create a + * lot of interrupts, even to the point of overwhelming devices running + * at low frequencies. Some devices need to do special clock handling + * at shutdown-time which may bring the system clock below the threshold + * of being able to handle the dwc2 interrupts. Disabling dwc2-irqs + * prevents reboots/poweroffs from getting stuck in such cases. + */ +static void dwc2_driver_shutdown(struct platform_device *dev) +{ + struct dwc2_hsotg *hsotg = platform_get_drvdata(dev); + + dwc2_disable_global_interrupts(hsotg); + synchronize_irq(hsotg->irq); +} + +/** + * dwc2_check_core_endianness() - Returns true if core and AHB have + * opposite endianness. + * @hsotg: Programming view of the DWC_otg controller. + */ +static bool dwc2_check_core_endianness(struct dwc2_hsotg *hsotg) +{ + u32 snpsid; + + snpsid = ioread32(hsotg->regs + GSNPSID); + if ((snpsid & GSNPSID_ID_MASK) == DWC2_OTG_ID || + (snpsid & GSNPSID_ID_MASK) == DWC2_FS_IOT_ID || + (snpsid & GSNPSID_ID_MASK) == DWC2_HS_IOT_ID) + return false; + return true; +} + +/** + * dwc2_check_core_version() - Check core version + * + * @hsotg: Programming view of the DWC_otg controller + * + */ +int dwc2_check_core_version(struct dwc2_hsotg *hsotg) +{ + struct dwc2_hw_params *hw = &hsotg->hw_params; + + /* + * Attempt to ensure this device is really a DWC_otg Controller. + * Read and verify the GSNPSID register contents. The value should be + * 0x45f4xxxx, 0x5531xxxx or 0x5532xxxx + */ + + hw->snpsid = dwc2_readl(hsotg, GSNPSID); + if ((hw->snpsid & GSNPSID_ID_MASK) != DWC2_OTG_ID && + (hw->snpsid & GSNPSID_ID_MASK) != DWC2_FS_IOT_ID && + (hw->snpsid & GSNPSID_ID_MASK) != DWC2_HS_IOT_ID) { + dev_err(hsotg->dev, "Bad value for GSNPSID: 0x%08x\n", + hw->snpsid); + return -ENODEV; + } + + dev_dbg(hsotg->dev, "Core Release: %1x.%1x%1x%1x (snpsid=%x)\n", + hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf, + hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid); + return 0; +} + +/** + * dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg + * driver + * + * @dev: Platform device + * + * This routine creates the driver components required to control the device + * (core, HCD, and PCD) and initializes the device. The driver components are + * stored in a dwc2_hsotg structure. A reference to the dwc2_hsotg is saved + * in the device private data. This allows the driver to access the dwc2_hsotg + * structure on subsequent calls to driver methods for this device. + */ +static int dwc2_driver_probe(struct platform_device *dev) +{ + struct dwc2_hsotg *hsotg; + struct resource *res; + int retval; + + hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL); + if (!hsotg) + return -ENOMEM; + + hsotg->dev = &dev->dev; + + /* + * Use reasonable defaults so platforms don't have to provide these. + */ + if (!dev->dev.dma_mask) + dev->dev.dma_mask = &dev->dev.coherent_dma_mask; + retval = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32)); + if (retval) { + dev_err(&dev->dev, "can't set coherent DMA mask: %d\n", retval); + return retval; + } + + hsotg->regs = devm_platform_get_and_ioremap_resource(dev, 0, &res); + if (IS_ERR(hsotg->regs)) + return PTR_ERR(hsotg->regs); + + dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n", + (unsigned long)res->start, hsotg->regs); + + retval = dwc2_lowlevel_hw_init(hsotg); + if (retval) + return retval; + + spin_lock_init(&hsotg->lock); + + hsotg->irq = platform_get_irq(dev, 0); + if (hsotg->irq < 0) + return hsotg->irq; + + dev_dbg(hsotg->dev, "registering common handler for irq%d\n", + hsotg->irq); + retval = devm_request_irq(hsotg->dev, hsotg->irq, + dwc2_handle_common_intr, IRQF_SHARED, + dev_name(hsotg->dev), hsotg); + if (retval) + return retval; + + hsotg->vbus_supply = devm_regulator_get_optional(hsotg->dev, "vbus"); + if (IS_ERR(hsotg->vbus_supply)) { + retval = PTR_ERR(hsotg->vbus_supply); + hsotg->vbus_supply = NULL; + if (retval != -ENODEV) + return retval; + } + + retval = dwc2_lowlevel_hw_enable(hsotg); + if (retval) + return retval; + + hsotg->needs_byte_swap = dwc2_check_core_endianness(hsotg); + + retval = dwc2_get_dr_mode(hsotg); + if (retval) + goto error; + + hsotg->need_phy_for_wake = + of_property_read_bool(dev->dev.of_node, + "snps,need-phy-for-wake"); + + /* + * Before performing any core related operations + * check core version. + */ + retval = dwc2_check_core_version(hsotg); + if (retval) + goto error; + + /* + * Reset before dwc2_get_hwparams() then it could get power-on real + * reset value form registers. + */ + retval = dwc2_core_reset(hsotg, false); + if (retval) + goto error; + + /* Detect config values from hardware */ + retval = dwc2_get_hwparams(hsotg); + if (retval) + goto error; + + /* + * For OTG cores, set the force mode bits to reflect the value + * of dr_mode. Force mode bits should not be touched at any + * other time after this. + */ + dwc2_force_dr_mode(hsotg); + + retval = dwc2_init_params(hsotg); + if (retval) + goto error; + + if (hsotg->params.activate_stm_id_vb_detection) { + u32 ggpio; + + hsotg->usb33d = devm_regulator_get(hsotg->dev, "usb33d"); + if (IS_ERR(hsotg->usb33d)) { + retval = PTR_ERR(hsotg->usb33d); + dev_err_probe(hsotg->dev, retval, "failed to request usb33d supply\n"); + goto error; + } + retval = regulator_enable(hsotg->usb33d); + if (retval) { + dev_err_probe(hsotg->dev, retval, "failed to enable usb33d supply\n"); + goto error; + } + + ggpio = dwc2_readl(hsotg, GGPIO); + ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN; + ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN; + dwc2_writel(hsotg, ggpio, GGPIO); + + /* ID/VBUS detection startup time */ + usleep_range(5000, 7000); + } + + retval = dwc2_drd_init(hsotg); + if (retval) { + dev_err_probe(hsotg->dev, retval, "failed to initialize dual-role\n"); + goto error_init; + } + + if (hsotg->dr_mode != USB_DR_MODE_HOST) { + retval = dwc2_gadget_init(hsotg); + if (retval) + goto error_drd; + hsotg->gadget_enabled = 1; + } + + /* + * If we need PHY for wakeup we must be wakeup capable. + * When we have a device that can wake without the PHY we + * can adjust this condition. + */ + if (hsotg->need_phy_for_wake) + device_set_wakeup_capable(&dev->dev, true); + + hsotg->reset_phy_on_wake = + of_property_read_bool(dev->dev.of_node, + "snps,reset-phy-on-wake"); + if (hsotg->reset_phy_on_wake && !hsotg->phy) { + dev_warn(hsotg->dev, + "Quirk reset-phy-on-wake only supports generic PHYs\n"); + hsotg->reset_phy_on_wake = false; + } + + if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) { + retval = dwc2_hcd_init(hsotg); + if (retval) { + if (hsotg->gadget_enabled) + dwc2_hsotg_remove(hsotg); + goto error_drd; + } + hsotg->hcd_enabled = 1; + } + + platform_set_drvdata(dev, hsotg); + hsotg->hibernated = 0; + + dwc2_debugfs_init(hsotg); + + /* Gadget code manages lowlevel hw on its own */ + if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) + dwc2_lowlevel_hw_disable(hsotg); + +#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \ + IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) + /* Postponed adding a new gadget to the udc class driver list */ + if (hsotg->gadget_enabled) { + retval = usb_add_gadget_udc(hsotg->dev, &hsotg->gadget); + if (retval) { + hsotg->gadget.udc = NULL; + dwc2_hsotg_remove(hsotg); + goto error_debugfs; + } + } +#endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */ + return 0; + +#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \ + IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) +error_debugfs: + dwc2_debugfs_exit(hsotg); + if (hsotg->hcd_enabled) + dwc2_hcd_remove(hsotg); +#endif +error_drd: + dwc2_drd_exit(hsotg); + +error_init: + if (hsotg->params.activate_stm_id_vb_detection) + regulator_disable(hsotg->usb33d); +error: + if (hsotg->ll_hw_enabled) + dwc2_lowlevel_hw_disable(hsotg); + return retval; +} + +static int __maybe_unused dwc2_suspend(struct device *dev) +{ + struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev); + bool is_device_mode = dwc2_is_device_mode(dwc2); + int ret = 0; + + if (is_device_mode) + dwc2_hsotg_suspend(dwc2); + + dwc2_drd_suspend(dwc2); + + if (dwc2->params.activate_stm_id_vb_detection) { + unsigned long flags; + u32 ggpio, gotgctl; + + /* + * Need to force the mode to the current mode to avoid Mode + * Mismatch Interrupt when ID detection will be disabled. + */ + dwc2_force_mode(dwc2, !is_device_mode); + + spin_lock_irqsave(&dwc2->lock, flags); + gotgctl = dwc2_readl(dwc2, GOTGCTL); + /* bypass debounce filter, enable overrides */ + gotgctl |= GOTGCTL_DBNCE_FLTR_BYPASS; + gotgctl |= GOTGCTL_BVALOEN | GOTGCTL_AVALOEN; + /* Force A / B session if needed */ + if (gotgctl & GOTGCTL_ASESVLD) + gotgctl |= GOTGCTL_AVALOVAL; + if (gotgctl & GOTGCTL_BSESVLD) + gotgctl |= GOTGCTL_BVALOVAL; + dwc2_writel(dwc2, gotgctl, GOTGCTL); + spin_unlock_irqrestore(&dwc2->lock, flags); + + ggpio = dwc2_readl(dwc2, GGPIO); + ggpio &= ~GGPIO_STM32_OTG_GCCFG_IDEN; + ggpio &= ~GGPIO_STM32_OTG_GCCFG_VBDEN; + dwc2_writel(dwc2, ggpio, GGPIO); + + regulator_disable(dwc2->usb33d); + } + + if (dwc2->ll_hw_enabled && + (is_device_mode || dwc2_host_can_poweroff_phy(dwc2))) { + ret = __dwc2_lowlevel_hw_disable(dwc2); + dwc2->phy_off_for_suspend = true; + } + + return ret; +} + +static int __maybe_unused dwc2_resume(struct device *dev) +{ + struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev); + int ret = 0; + + if (dwc2->phy_off_for_suspend && dwc2->ll_hw_enabled) { + ret = __dwc2_lowlevel_hw_enable(dwc2); + if (ret) + return ret; + } + dwc2->phy_off_for_suspend = false; + + if (dwc2->params.activate_stm_id_vb_detection) { + unsigned long flags; + u32 ggpio, gotgctl; + + ret = regulator_enable(dwc2->usb33d); + if (ret) + return ret; + + ggpio = dwc2_readl(dwc2, GGPIO); + ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN; + ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN; + dwc2_writel(dwc2, ggpio, GGPIO); + + /* ID/VBUS detection startup time */ + usleep_range(5000, 7000); + + spin_lock_irqsave(&dwc2->lock, flags); + gotgctl = dwc2_readl(dwc2, GOTGCTL); + gotgctl &= ~GOTGCTL_DBNCE_FLTR_BYPASS; + gotgctl &= ~(GOTGCTL_BVALOEN | GOTGCTL_AVALOEN | + GOTGCTL_BVALOVAL | GOTGCTL_AVALOVAL); + dwc2_writel(dwc2, gotgctl, GOTGCTL); + spin_unlock_irqrestore(&dwc2->lock, flags); + } + + if (!dwc2->role_sw) { + /* Need to restore FORCEDEVMODE/FORCEHOSTMODE */ + dwc2_force_dr_mode(dwc2); + } else { + dwc2_drd_resume(dwc2); + } + + if (dwc2_is_device_mode(dwc2)) + ret = dwc2_hsotg_resume(dwc2); + + return ret; +} + +static const struct dev_pm_ops dwc2_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(dwc2_suspend, dwc2_resume) +}; + +static struct platform_driver dwc2_platform_driver = { + .driver = { + .name = dwc2_driver_name, + .of_match_table = dwc2_of_match_table, + .acpi_match_table = ACPI_PTR(dwc2_acpi_match), + .pm = &dwc2_dev_pm_ops, + }, + .probe = dwc2_driver_probe, + .remove_new = dwc2_driver_remove, + .shutdown = dwc2_driver_shutdown, +}; + +module_platform_driver(dwc2_platform_driver); |