diff options
Diffstat (limited to 'drivers/usb/dwc3/Kconfig')
| -rw-r--r-- | drivers/usb/dwc3/Kconfig | 181 |
1 files changed, 181 insertions, 0 deletions
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig new file mode 100644 index 0000000000..98efcbb76c --- /dev/null +++ b/drivers/usb/dwc3/Kconfig @@ -0,0 +1,181 @@ +# SPDX-License-Identifier: GPL-2.0 + +config USB_DWC3 + tristate "DesignWare USB3 DRD Core Support" + depends on (USB || USB_GADGET) && HAS_DMA + depends on (EXTCON || EXTCON=n) + select USB_XHCI_PLATFORM if USB_XHCI_HCD + select USB_ROLE_SWITCH if USB_DWC3_DUAL_ROLE + help + Say Y or M here if your system has a Dual Role SuperSpeed + USB controller based on the DesignWare USB3 IP Core. + + If you choose to build this driver as a dynamically linked + module, the module will be called dwc3.ko. + +if USB_DWC3 + +config USB_DWC3_ULPI + bool "Register ULPI PHY Interface" + depends on USB_ULPI_BUS=y || USB_ULPI_BUS=USB_DWC3 + help + Select this if you have ULPI type PHY attached to your DWC3 + controller. + +choice + bool "DWC3 Mode Selection" + default USB_DWC3_DUAL_ROLE if (USB && USB_GADGET) + default USB_DWC3_HOST if (USB && !USB_GADGET) + default USB_DWC3_GADGET if (!USB && USB_GADGET) + +config USB_DWC3_HOST + bool "Host only mode" + depends on USB=y || USB=USB_DWC3 + help + Select this when you want to use DWC3 in host mode only, + thereby the gadget feature will be regressed. + +config USB_DWC3_GADGET + bool "Gadget only mode" + depends on USB_GADGET=y || USB_GADGET=USB_DWC3 + help + Select this when you want to use DWC3 in gadget mode only, + thereby the host feature will be regressed. + +config USB_DWC3_DUAL_ROLE + bool "Dual Role mode" + depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3)) + help + This is the default mode of working of DWC3 controller where + both host and gadget features are enabled. + +endchoice + +comment "Platform Glue Driver Support" + +config USB_DWC3_OMAP + tristate "Texas Instruments OMAP5 and similar Platforms" + depends on ARCH_OMAP2PLUS || COMPILE_TEST + depends on EXTCON || !EXTCON + depends on OF + default USB_DWC3 + help + Some platforms from Texas Instruments like OMAP5, DRA7xxx and + AM437x use this IP for USB2/3 functionality. + + Say 'Y' or 'M' here if you have one such device + +config USB_DWC3_EXYNOS + tristate "Samsung Exynos SoC Platform" + depends on (ARCH_EXYNOS || COMPILE_TEST) && OF + default USB_DWC3 + help + Recent Samsung Exynos SoCs (Exynos5250, Exynos5410, Exynos542x, + Exynos5800, Exynos5433, Exynos7) ship with one DesignWare Core USB3 + IP inside, say 'Y' or 'M' if you have one such device. + +config USB_DWC3_PCI + tristate "PCIe-based Platforms" + depends on USB_PCI && ACPI + default USB_DWC3 + help + If you're using the DesignWare Core IP with a PCIe (but not HAPS + platform), please say 'Y' or 'M' here. + +config USB_DWC3_HAPS + tristate "Synopsys PCIe-based HAPS Platforms" + depends on USB_PCI + default USB_DWC3 + help + If you're using the DesignWare Core IP with a Synopsys PCIe HAPS + platform, please say 'Y' or 'M' here. + +config USB_DWC3_KEYSTONE + tristate "Texas Instruments Keystone2/AM654 Platforms" + depends on ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST + default USB_DWC3 + help + Support of USB2/3 functionality in TI Keystone2 and AM654 platforms. + Say 'Y' or 'M' here if you have one such device + +config USB_DWC3_MESON_G12A + tristate "Amlogic Meson G12A Platforms" + depends on OF && COMMON_CLK + depends on ARCH_MESON || COMPILE_TEST + default USB_DWC3 + select USB_ROLE_SWITCH + select REGMAP_MMIO + help + Support USB2/3 functionality in Amlogic G12A platforms. + Say 'Y' or 'M' if you have one such device. + +config USB_DWC3_OF_SIMPLE + tristate "Generic OF Simple Glue Layer" + depends on OF && COMMON_CLK + default USB_DWC3 + help + Support USB2/3 functionality in simple SoC integrations. + Currently supports Xilinx and Qualcomm DWC USB3 IP. + Say 'Y' or 'M' if you have one such device. + +config USB_DWC3_ST + tristate "STMicroelectronics Platforms" + depends on (ARCH_STI || COMPILE_TEST) && OF + default USB_DWC3 + help + STMicroelectronics SoCs with one DesignWare Core USB3 IP + inside (i.e. STiH407). + Say 'Y' or 'M' if you have one such device. + +config USB_DWC3_QCOM + tristate "Qualcomm Platform" + depends on ARCH_QCOM || COMPILE_TEST + depends on EXTCON || !EXTCON + depends on (OF || ACPI) + default USB_DWC3 + help + Some Qualcomm SoCs use DesignWare Core IP for USB2/3 + functionality. + This driver also handles Qscratch wrapper which is needed + for peripheral mode support. + Say 'Y' or 'M' if you have one such device. + +config USB_DWC3_IMX8MP + tristate "NXP iMX8MP Platform" + depends on OF && COMMON_CLK + depends on (ARCH_MXC && ARM64) || COMPILE_TEST + default USB_DWC3 + help + NXP iMX8M Plus SoC use DesignWare Core IP for USB2/3 + functionality. + Say 'Y' or 'M' if you have one such device. + +config USB_DWC3_XILINX + tristate "Xilinx Platforms" + depends on (ARCH_ZYNQMP || COMPILE_TEST) && OF + default USB_DWC3 + help + Support Xilinx SoCs with DesignWare Core USB3 IP. + This driver handles ZynqMP SoC operations. + Say 'Y' or 'M' if you have one such device. + +config USB_DWC3_AM62 + tristate "Texas Instruments AM62 Platforms" + depends on ARCH_K3 || COMPILE_TEST + default USB_DWC3 + help + Support TI's AM62 platforms with DesignWare Core USB3 IP. + The Designware Core USB3 IP is programmed to operate in + in USB 2.0 mode only. + Say 'Y' or 'M' here if you have one such device + +config USB_DWC3_OCTEON + tristate "Cavium Octeon Platforms" + depends on CAVIUM_OCTEON_SOC || COMPILE_TEST + default USB_DWC3 + help + Support Cavium Octeon platforms with DesignWare Core USB3 IP. + Only the host mode is currently supported. + Say 'Y' or 'M' here if you have one such device. + +endif |