diff options
Diffstat (limited to 'drivers/usb/dwc3/dwc3-qcom.c')
| -rw-r--r-- | drivers/usb/dwc3/dwc3-qcom.c | 1106 |
1 files changed, 1106 insertions, 0 deletions
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c new file mode 100644 index 0000000000..8254437411 --- /dev/null +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -0,0 +1,1106 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2018, The Linux Foundation. All rights reserved. + * + * Inspired by dwc3-of-simple.c + */ + +#include <linux/acpi.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/clk.h> +#include <linux/irq.h> +#include <linux/of_clk.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/extcon.h> +#include <linux/interconnect.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/phy/phy.h> +#include <linux/usb/of.h> +#include <linux/reset.h> +#include <linux/iopoll.h> +#include <linux/usb/hcd.h> +#include <linux/usb.h> +#include "core.h" + +/* USB QSCRATCH Hardware registers */ +#define QSCRATCH_HS_PHY_CTRL 0x10 +#define UTMI_OTG_VBUS_VALID BIT(20) +#define SW_SESSVLD_SEL BIT(28) + +#define QSCRATCH_SS_PHY_CTRL 0x30 +#define LANE0_PWR_PRESENT BIT(24) + +#define QSCRATCH_GENERAL_CFG 0x08 +#define PIPE_UTMI_CLK_SEL BIT(0) +#define PIPE3_PHYSTATUS_SW BIT(3) +#define PIPE_UTMI_CLK_DIS BIT(8) + +#define PWR_EVNT_IRQ_STAT_REG 0x58 +#define PWR_EVNT_LPM_IN_L2_MASK BIT(4) +#define PWR_EVNT_LPM_OUT_L2_MASK BIT(5) + +#define SDM845_QSCRATCH_BASE_OFFSET 0xf8800 +#define SDM845_QSCRATCH_SIZE 0x400 +#define SDM845_DWC3_CORE_SIZE 0xcd00 + +/* Interconnect path bandwidths in MBps */ +#define USB_MEMORY_AVG_HS_BW MBps_to_icc(240) +#define USB_MEMORY_PEAK_HS_BW MBps_to_icc(700) +#define USB_MEMORY_AVG_SS_BW MBps_to_icc(1000) +#define USB_MEMORY_PEAK_SS_BW MBps_to_icc(2500) +#define APPS_USB_AVG_BW 0 +#define APPS_USB_PEAK_BW MBps_to_icc(40) + +struct dwc3_acpi_pdata { + u32 qscratch_base_offset; + u32 qscratch_base_size; + u32 dwc3_core_base_size; + int hs_phy_irq_index; + int dp_hs_phy_irq_index; + int dm_hs_phy_irq_index; + int ss_phy_irq_index; + bool is_urs; +}; + +struct dwc3_qcom { + struct device *dev; + void __iomem *qscratch_base; + struct platform_device *dwc3; + struct platform_device *urs_usb; + struct clk **clks; + int num_clocks; + struct reset_control *resets; + + int hs_phy_irq; + int dp_hs_phy_irq; + int dm_hs_phy_irq; + int ss_phy_irq; + enum usb_device_speed usb2_speed; + + struct extcon_dev *edev; + struct extcon_dev *host_edev; + struct notifier_block vbus_nb; + struct notifier_block host_nb; + + const struct dwc3_acpi_pdata *acpi_pdata; + + enum usb_dr_mode mode; + bool is_suspended; + bool pm_suspended; + struct icc_path *icc_path_ddr; + struct icc_path *icc_path_apps; +}; + +static inline void dwc3_qcom_setbits(void __iomem *base, u32 offset, u32 val) +{ + u32 reg; + + reg = readl(base + offset); + reg |= val; + writel(reg, base + offset); + + /* ensure that above write is through */ + readl(base + offset); +} + +static inline void dwc3_qcom_clrbits(void __iomem *base, u32 offset, u32 val) +{ + u32 reg; + + reg = readl(base + offset); + reg &= ~val; + writel(reg, base + offset); + + /* ensure that above write is through */ + readl(base + offset); +} + +static void dwc3_qcom_vbus_override_enable(struct dwc3_qcom *qcom, bool enable) +{ + if (enable) { + dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_SS_PHY_CTRL, + LANE0_PWR_PRESENT); + dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_HS_PHY_CTRL, + UTMI_OTG_VBUS_VALID | SW_SESSVLD_SEL); + } else { + dwc3_qcom_clrbits(qcom->qscratch_base, QSCRATCH_SS_PHY_CTRL, + LANE0_PWR_PRESENT); + dwc3_qcom_clrbits(qcom->qscratch_base, QSCRATCH_HS_PHY_CTRL, + UTMI_OTG_VBUS_VALID | SW_SESSVLD_SEL); + } +} + +static int dwc3_qcom_vbus_notifier(struct notifier_block *nb, + unsigned long event, void *ptr) +{ + struct dwc3_qcom *qcom = container_of(nb, struct dwc3_qcom, vbus_nb); + + /* enable vbus override for device mode */ + dwc3_qcom_vbus_override_enable(qcom, event); + qcom->mode = event ? USB_DR_MODE_PERIPHERAL : USB_DR_MODE_HOST; + + return NOTIFY_DONE; +} + +static int dwc3_qcom_host_notifier(struct notifier_block *nb, + unsigned long event, void *ptr) +{ + struct dwc3_qcom *qcom = container_of(nb, struct dwc3_qcom, host_nb); + + /* disable vbus override in host mode */ + dwc3_qcom_vbus_override_enable(qcom, !event); + qcom->mode = event ? USB_DR_MODE_HOST : USB_DR_MODE_PERIPHERAL; + + return NOTIFY_DONE; +} + +static int dwc3_qcom_register_extcon(struct dwc3_qcom *qcom) +{ + struct device *dev = qcom->dev; + struct extcon_dev *host_edev; + int ret; + + if (!of_property_read_bool(dev->of_node, "extcon")) + return 0; + + qcom->edev = extcon_get_edev_by_phandle(dev, 0); + if (IS_ERR(qcom->edev)) + return dev_err_probe(dev, PTR_ERR(qcom->edev), + "Failed to get extcon\n"); + + qcom->vbus_nb.notifier_call = dwc3_qcom_vbus_notifier; + + qcom->host_edev = extcon_get_edev_by_phandle(dev, 1); + if (IS_ERR(qcom->host_edev)) + qcom->host_edev = NULL; + + ret = devm_extcon_register_notifier(dev, qcom->edev, EXTCON_USB, + &qcom->vbus_nb); + if (ret < 0) { + dev_err(dev, "VBUS notifier register failed\n"); + return ret; + } + + if (qcom->host_edev) + host_edev = qcom->host_edev; + else + host_edev = qcom->edev; + + qcom->host_nb.notifier_call = dwc3_qcom_host_notifier; + ret = devm_extcon_register_notifier(dev, host_edev, EXTCON_USB_HOST, + &qcom->host_nb); + if (ret < 0) { + dev_err(dev, "Host notifier register failed\n"); + return ret; + } + + /* Update initial VBUS override based on extcon state */ + if (extcon_get_state(qcom->edev, EXTCON_USB) || + !extcon_get_state(host_edev, EXTCON_USB_HOST)) + dwc3_qcom_vbus_notifier(&qcom->vbus_nb, true, qcom->edev); + else + dwc3_qcom_vbus_notifier(&qcom->vbus_nb, false, qcom->edev); + + return 0; +} + +static int dwc3_qcom_interconnect_enable(struct dwc3_qcom *qcom) +{ + int ret; + + ret = icc_enable(qcom->icc_path_ddr); + if (ret) + return ret; + + ret = icc_enable(qcom->icc_path_apps); + if (ret) + icc_disable(qcom->icc_path_ddr); + + return ret; +} + +static int dwc3_qcom_interconnect_disable(struct dwc3_qcom *qcom) +{ + int ret; + + ret = icc_disable(qcom->icc_path_ddr); + if (ret) + return ret; + + ret = icc_disable(qcom->icc_path_apps); + if (ret) + icc_enable(qcom->icc_path_ddr); + + return ret; +} + +/** + * dwc3_qcom_interconnect_init() - Get interconnect path handles + * and set bandwidth. + * @qcom: Pointer to the concerned usb core. + * + */ +static int dwc3_qcom_interconnect_init(struct dwc3_qcom *qcom) +{ + enum usb_device_speed max_speed; + struct device *dev = qcom->dev; + int ret; + + if (has_acpi_companion(dev)) + return 0; + + qcom->icc_path_ddr = of_icc_get(dev, "usb-ddr"); + if (IS_ERR(qcom->icc_path_ddr)) { + return dev_err_probe(dev, PTR_ERR(qcom->icc_path_ddr), + "failed to get usb-ddr path\n"); + } + + qcom->icc_path_apps = of_icc_get(dev, "apps-usb"); + if (IS_ERR(qcom->icc_path_apps)) { + ret = dev_err_probe(dev, PTR_ERR(qcom->icc_path_apps), + "failed to get apps-usb path\n"); + goto put_path_ddr; + } + + max_speed = usb_get_maximum_speed(&qcom->dwc3->dev); + if (max_speed >= USB_SPEED_SUPER || max_speed == USB_SPEED_UNKNOWN) { + ret = icc_set_bw(qcom->icc_path_ddr, + USB_MEMORY_AVG_SS_BW, USB_MEMORY_PEAK_SS_BW); + } else { + ret = icc_set_bw(qcom->icc_path_ddr, + USB_MEMORY_AVG_HS_BW, USB_MEMORY_PEAK_HS_BW); + } + if (ret) { + dev_err(dev, "failed to set bandwidth for usb-ddr path: %d\n", ret); + goto put_path_apps; + } + + ret = icc_set_bw(qcom->icc_path_apps, APPS_USB_AVG_BW, APPS_USB_PEAK_BW); + if (ret) { + dev_err(dev, "failed to set bandwidth for apps-usb path: %d\n", ret); + goto put_path_apps; + } + + return 0; + +put_path_apps: + icc_put(qcom->icc_path_apps); +put_path_ddr: + icc_put(qcom->icc_path_ddr); + return ret; +} + +/** + * dwc3_qcom_interconnect_exit() - Release interconnect path handles + * @qcom: Pointer to the concerned usb core. + * + * This function is used to release interconnect path handle. + */ +static void dwc3_qcom_interconnect_exit(struct dwc3_qcom *qcom) +{ + icc_put(qcom->icc_path_ddr); + icc_put(qcom->icc_path_apps); +} + +/* Only usable in contexts where the role can not change. */ +static bool dwc3_qcom_is_host(struct dwc3_qcom *qcom) +{ + struct dwc3 *dwc; + + /* + * FIXME: Fix this layering violation. + */ + dwc = platform_get_drvdata(qcom->dwc3); + + /* Core driver may not have probed yet. */ + if (!dwc) + return false; + + return dwc->xhci; +} + +static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom) +{ + struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3); + struct usb_device *udev; + struct usb_hcd __maybe_unused *hcd; + + /* + * FIXME: Fix this layering violation. + */ + hcd = platform_get_drvdata(dwc->xhci); + + /* + * It is possible to query the speed of all children of + * USB2.0 root hub via usb_hub_for_each_child(). DWC3 code + * currently supports only 1 port per controller. So + * this is sufficient. + */ +#ifdef CONFIG_USB + udev = usb_hub_find_child(hcd->self.root_hub, 1); +#else + udev = NULL; +#endif + if (!udev) + return USB_SPEED_UNKNOWN; + + return udev->speed; +} + +static void dwc3_qcom_enable_wakeup_irq(int irq, unsigned int polarity) +{ + if (!irq) + return; + + if (polarity) + irq_set_irq_type(irq, polarity); + + enable_irq(irq); + enable_irq_wake(irq); +} + +static void dwc3_qcom_disable_wakeup_irq(int irq) +{ + if (!irq) + return; + + disable_irq_wake(irq); + disable_irq_nosync(irq); +} + +static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom) +{ + dwc3_qcom_disable_wakeup_irq(qcom->hs_phy_irq); + + if (qcom->usb2_speed == USB_SPEED_LOW) { + dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq); + } else if ((qcom->usb2_speed == USB_SPEED_HIGH) || + (qcom->usb2_speed == USB_SPEED_FULL)) { + dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq); + } else { + dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq); + dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq); + } + + dwc3_qcom_disable_wakeup_irq(qcom->ss_phy_irq); +} + +static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom) +{ + dwc3_qcom_enable_wakeup_irq(qcom->hs_phy_irq, 0); + + /* + * Configure DP/DM line interrupts based on the USB2 device attached to + * the root hub port. When HS/FS device is connected, configure the DP line + * as falling edge to detect both disconnect and remote wakeup scenarios. When + * LS device is connected, configure DM line as falling edge to detect both + * disconnect and remote wakeup. When no device is connected, configure both + * DP and DM lines as rising edge to detect HS/HS/LS device connect scenario. + */ + + if (qcom->usb2_speed == USB_SPEED_LOW) { + dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq, + IRQ_TYPE_EDGE_FALLING); + } else if ((qcom->usb2_speed == USB_SPEED_HIGH) || + (qcom->usb2_speed == USB_SPEED_FULL)) { + dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq, + IRQ_TYPE_EDGE_FALLING); + } else { + dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq, + IRQ_TYPE_EDGE_RISING); + dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq, + IRQ_TYPE_EDGE_RISING); + } + + dwc3_qcom_enable_wakeup_irq(qcom->ss_phy_irq, 0); +} + +static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup) +{ + u32 val; + int i, ret; + + if (qcom->is_suspended) + return 0; + + val = readl(qcom->qscratch_base + PWR_EVNT_IRQ_STAT_REG); + if (!(val & PWR_EVNT_LPM_IN_L2_MASK)) + dev_err(qcom->dev, "HS-PHY not in L2\n"); + + for (i = qcom->num_clocks - 1; i >= 0; i--) + clk_disable_unprepare(qcom->clks[i]); + + ret = dwc3_qcom_interconnect_disable(qcom); + if (ret) + dev_warn(qcom->dev, "failed to disable interconnect: %d\n", ret); + + /* + * The role is stable during suspend as role switching is done from a + * freezable workqueue. + */ + if (dwc3_qcom_is_host(qcom) && wakeup) { + qcom->usb2_speed = dwc3_qcom_read_usb2_speed(qcom); + dwc3_qcom_enable_interrupts(qcom); + } + + qcom->is_suspended = true; + + return 0; +} + +static int dwc3_qcom_resume(struct dwc3_qcom *qcom, bool wakeup) +{ + int ret; + int i; + + if (!qcom->is_suspended) + return 0; + + if (dwc3_qcom_is_host(qcom) && wakeup) + dwc3_qcom_disable_interrupts(qcom); + + for (i = 0; i < qcom->num_clocks; i++) { + ret = clk_prepare_enable(qcom->clks[i]); + if (ret < 0) { + while (--i >= 0) + clk_disable_unprepare(qcom->clks[i]); + return ret; + } + } + + ret = dwc3_qcom_interconnect_enable(qcom); + if (ret) + dev_warn(qcom->dev, "failed to enable interconnect: %d\n", ret); + + /* Clear existing events from PHY related to L2 in/out */ + dwc3_qcom_setbits(qcom->qscratch_base, PWR_EVNT_IRQ_STAT_REG, + PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK); + + qcom->is_suspended = false; + + return 0; +} + +static irqreturn_t qcom_dwc3_resume_irq(int irq, void *data) +{ + struct dwc3_qcom *qcom = data; + struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3); + + /* If pm_suspended then let pm_resume take care of resuming h/w */ + if (qcom->pm_suspended) + return IRQ_HANDLED; + + /* + * This is safe as role switching is done from a freezable workqueue + * and the wakeup interrupts are disabled as part of resume. + */ + if (dwc3_qcom_is_host(qcom)) + pm_runtime_resume(&dwc->xhci->dev); + + return IRQ_HANDLED; +} + +static void dwc3_qcom_select_utmi_clk(struct dwc3_qcom *qcom) +{ + /* Configure dwc3 to use UTMI clock as PIPE clock not present */ + dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_GENERAL_CFG, + PIPE_UTMI_CLK_DIS); + + usleep_range(100, 1000); + + dwc3_qcom_setbits(qcom->qscratch_base, QSCRATCH_GENERAL_CFG, + PIPE_UTMI_CLK_SEL | PIPE3_PHYSTATUS_SW); + + usleep_range(100, 1000); + + dwc3_qcom_clrbits(qcom->qscratch_base, QSCRATCH_GENERAL_CFG, + PIPE_UTMI_CLK_DIS); +} + +static int dwc3_qcom_get_irq(struct platform_device *pdev, + const char *name, int num) +{ + struct dwc3_qcom *qcom = platform_get_drvdata(pdev); + struct platform_device *pdev_irq = qcom->urs_usb ? qcom->urs_usb : pdev; + struct device_node *np = pdev->dev.of_node; + int ret; + + if (np) + ret = platform_get_irq_byname_optional(pdev_irq, name); + else + ret = platform_get_irq_optional(pdev_irq, num); + + return ret; +} + +static int dwc3_qcom_setup_irq(struct platform_device *pdev) +{ + struct dwc3_qcom *qcom = platform_get_drvdata(pdev); + const struct dwc3_acpi_pdata *pdata = qcom->acpi_pdata; + int irq; + int ret; + + irq = dwc3_qcom_get_irq(pdev, "hs_phy_irq", + pdata ? pdata->hs_phy_irq_index : -1); + if (irq > 0) { + /* Keep wakeup interrupts disabled until suspend */ + irq_set_status_flags(irq, IRQ_NOAUTOEN); + ret = devm_request_threaded_irq(qcom->dev, irq, NULL, + qcom_dwc3_resume_irq, + IRQF_ONESHOT, + "qcom_dwc3 HS", qcom); + if (ret) { + dev_err(qcom->dev, "hs_phy_irq failed: %d\n", ret); + return ret; + } + qcom->hs_phy_irq = irq; + } + + irq = dwc3_qcom_get_irq(pdev, "dp_hs_phy_irq", + pdata ? pdata->dp_hs_phy_irq_index : -1); + if (irq > 0) { + irq_set_status_flags(irq, IRQ_NOAUTOEN); + ret = devm_request_threaded_irq(qcom->dev, irq, NULL, + qcom_dwc3_resume_irq, + IRQF_ONESHOT, + "qcom_dwc3 DP_HS", qcom); + if (ret) { + dev_err(qcom->dev, "dp_hs_phy_irq failed: %d\n", ret); + return ret; + } + qcom->dp_hs_phy_irq = irq; + } + + irq = dwc3_qcom_get_irq(pdev, "dm_hs_phy_irq", + pdata ? pdata->dm_hs_phy_irq_index : -1); + if (irq > 0) { + irq_set_status_flags(irq, IRQ_NOAUTOEN); + ret = devm_request_threaded_irq(qcom->dev, irq, NULL, + qcom_dwc3_resume_irq, + IRQF_ONESHOT, + "qcom_dwc3 DM_HS", qcom); + if (ret) { + dev_err(qcom->dev, "dm_hs_phy_irq failed: %d\n", ret); + return ret; + } + qcom->dm_hs_phy_irq = irq; + } + + irq = dwc3_qcom_get_irq(pdev, "ss_phy_irq", + pdata ? pdata->ss_phy_irq_index : -1); + if (irq > 0) { + irq_set_status_flags(irq, IRQ_NOAUTOEN); + ret = devm_request_threaded_irq(qcom->dev, irq, NULL, + qcom_dwc3_resume_irq, + IRQF_ONESHOT, + "qcom_dwc3 SS", qcom); + if (ret) { + dev_err(qcom->dev, "ss_phy_irq failed: %d\n", ret); + return ret; + } + qcom->ss_phy_irq = irq; + } + + return 0; +} + +static int dwc3_qcom_clk_init(struct dwc3_qcom *qcom, int count) +{ + struct device *dev = qcom->dev; + struct device_node *np = dev->of_node; + int i; + + if (!np || !count) + return 0; + + if (count < 0) + return count; + + qcom->num_clocks = count; + + qcom->clks = devm_kcalloc(dev, qcom->num_clocks, + sizeof(struct clk *), GFP_KERNEL); + if (!qcom->clks) + return -ENOMEM; + + for (i = 0; i < qcom->num_clocks; i++) { + struct clk *clk; + int ret; + + clk = of_clk_get(np, i); + if (IS_ERR(clk)) { + while (--i >= 0) + clk_put(qcom->clks[i]); + return PTR_ERR(clk); + } + + ret = clk_prepare_enable(clk); + if (ret < 0) { + while (--i >= 0) { + clk_disable_unprepare(qcom->clks[i]); + clk_put(qcom->clks[i]); + } + clk_put(clk); + + return ret; + } + + qcom->clks[i] = clk; + } + + return 0; +} + +static const struct property_entry dwc3_qcom_acpi_properties[] = { + PROPERTY_ENTRY_STRING("dr_mode", "host"), + {} +}; + +static const struct software_node dwc3_qcom_swnode = { + .properties = dwc3_qcom_acpi_properties, +}; + +static int dwc3_qcom_acpi_register_core(struct platform_device *pdev) +{ + struct dwc3_qcom *qcom = platform_get_drvdata(pdev); + struct device *dev = &pdev->dev; + struct resource *res, *child_res = NULL; + struct platform_device *pdev_irq = qcom->urs_usb ? qcom->urs_usb : + pdev; + int irq; + int ret; + + qcom->dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO); + if (!qcom->dwc3) + return -ENOMEM; + + qcom->dwc3->dev.parent = dev; + qcom->dwc3->dev.type = dev->type; + qcom->dwc3->dev.dma_mask = dev->dma_mask; + qcom->dwc3->dev.dma_parms = dev->dma_parms; + qcom->dwc3->dev.coherent_dma_mask = dev->coherent_dma_mask; + + child_res = kcalloc(2, sizeof(*child_res), GFP_KERNEL); + if (!child_res) { + platform_device_put(qcom->dwc3); + return -ENOMEM; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "failed to get memory resource\n"); + ret = -ENODEV; + goto out; + } + + child_res[0].flags = res->flags; + child_res[0].start = res->start; + child_res[0].end = child_res[0].start + + qcom->acpi_pdata->dwc3_core_base_size; + + irq = platform_get_irq(pdev_irq, 0); + if (irq < 0) { + ret = irq; + goto out; + } + child_res[1].flags = IORESOURCE_IRQ; + child_res[1].start = child_res[1].end = irq; + + ret = platform_device_add_resources(qcom->dwc3, child_res, 2); + if (ret) { + dev_err(&pdev->dev, "failed to add resources\n"); + goto out; + } + + ret = device_add_software_node(&qcom->dwc3->dev, &dwc3_qcom_swnode); + if (ret < 0) { + dev_err(&pdev->dev, "failed to add properties\n"); + goto out; + } + + ret = platform_device_add(qcom->dwc3); + if (ret) { + dev_err(&pdev->dev, "failed to add device\n"); + device_remove_software_node(&qcom->dwc3->dev); + goto out; + } + kfree(child_res); + return 0; + +out: + platform_device_put(qcom->dwc3); + kfree(child_res); + return ret; +} + +static int dwc3_qcom_of_register_core(struct platform_device *pdev) +{ + struct dwc3_qcom *qcom = platform_get_drvdata(pdev); + struct device_node *np = pdev->dev.of_node, *dwc3_np; + struct device *dev = &pdev->dev; + int ret; + + dwc3_np = of_get_compatible_child(np, "snps,dwc3"); + if (!dwc3_np) { + dev_err(dev, "failed to find dwc3 core child\n"); + return -ENODEV; + } + + ret = of_platform_populate(np, NULL, NULL, dev); + if (ret) { + dev_err(dev, "failed to register dwc3 core - %d\n", ret); + goto node_put; + } + + qcom->dwc3 = of_find_device_by_node(dwc3_np); + if (!qcom->dwc3) { + ret = -ENODEV; + dev_err(dev, "failed to get dwc3 platform device\n"); + of_platform_depopulate(dev); + } + +node_put: + of_node_put(dwc3_np); + + return ret; +} + +static struct platform_device *dwc3_qcom_create_urs_usb_platdev(struct device *dev) +{ + struct platform_device *urs_usb = NULL; + struct fwnode_handle *fwh; + struct acpi_device *adev; + char name[8]; + int ret; + int id; + + /* Figure out device id */ + ret = sscanf(fwnode_get_name(dev->fwnode), "URS%d", &id); + if (!ret) + return NULL; + + /* Find the child using name */ + snprintf(name, sizeof(name), "USB%d", id); + fwh = fwnode_get_named_child_node(dev->fwnode, name); + if (!fwh) + return NULL; + + adev = to_acpi_device_node(fwh); + if (!adev) + goto err_put_handle; + + urs_usb = acpi_create_platform_device(adev, NULL); + if (IS_ERR_OR_NULL(urs_usb)) + goto err_put_handle; + + return urs_usb; + +err_put_handle: + fwnode_handle_put(fwh); + + return urs_usb; +} + +static void dwc3_qcom_destroy_urs_usb_platdev(struct platform_device *urs_usb) +{ + struct fwnode_handle *fwh = urs_usb->dev.fwnode; + + platform_device_unregister(urs_usb); + fwnode_handle_put(fwh); +} + +static int dwc3_qcom_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct device *dev = &pdev->dev; + struct dwc3_qcom *qcom; + struct resource *res, *parent_res = NULL; + struct resource local_res; + int ret, i; + bool ignore_pipe_clk; + bool wakeup_source; + + qcom = devm_kzalloc(&pdev->dev, sizeof(*qcom), GFP_KERNEL); + if (!qcom) + return -ENOMEM; + + platform_set_drvdata(pdev, qcom); + qcom->dev = &pdev->dev; + + if (has_acpi_companion(dev)) { + qcom->acpi_pdata = acpi_device_get_match_data(dev); + if (!qcom->acpi_pdata) { + dev_err(&pdev->dev, "no supporting ACPI device data\n"); + return -EINVAL; + } + } + + qcom->resets = devm_reset_control_array_get_optional_exclusive(dev); + if (IS_ERR(qcom->resets)) { + return dev_err_probe(&pdev->dev, PTR_ERR(qcom->resets), + "failed to get resets\n"); + } + + ret = reset_control_assert(qcom->resets); + if (ret) { + dev_err(&pdev->dev, "failed to assert resets, err=%d\n", ret); + return ret; + } + + usleep_range(10, 1000); + + ret = reset_control_deassert(qcom->resets); + if (ret) { + dev_err(&pdev->dev, "failed to deassert resets, err=%d\n", ret); + goto reset_assert; + } + + ret = dwc3_qcom_clk_init(qcom, of_clk_get_parent_count(np)); + if (ret) { + dev_err_probe(dev, ret, "failed to get clocks\n"); + goto reset_assert; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + if (np) { + parent_res = res; + } else { + memcpy(&local_res, res, sizeof(struct resource)); + parent_res = &local_res; + + parent_res->start = res->start + + qcom->acpi_pdata->qscratch_base_offset; + parent_res->end = parent_res->start + + qcom->acpi_pdata->qscratch_base_size; + + if (qcom->acpi_pdata->is_urs) { + qcom->urs_usb = dwc3_qcom_create_urs_usb_platdev(dev); + if (IS_ERR_OR_NULL(qcom->urs_usb)) { + dev_err(dev, "failed to create URS USB platdev\n"); + if (!qcom->urs_usb) + ret = -ENODEV; + else + ret = PTR_ERR(qcom->urs_usb); + goto clk_disable; + } + } + } + + qcom->qscratch_base = devm_ioremap_resource(dev, parent_res); + if (IS_ERR(qcom->qscratch_base)) { + ret = PTR_ERR(qcom->qscratch_base); + goto free_urs; + } + + ret = dwc3_qcom_setup_irq(pdev); + if (ret) { + dev_err(dev, "failed to setup IRQs, err=%d\n", ret); + goto free_urs; + } + + /* + * Disable pipe_clk requirement if specified. Used when dwc3 + * operates without SSPHY and only HS/FS/LS modes are supported. + */ + ignore_pipe_clk = device_property_read_bool(dev, + "qcom,select-utmi-as-pipe-clk"); + if (ignore_pipe_clk) + dwc3_qcom_select_utmi_clk(qcom); + + if (np) + ret = dwc3_qcom_of_register_core(pdev); + else + ret = dwc3_qcom_acpi_register_core(pdev); + + if (ret) { + dev_err(dev, "failed to register DWC3 Core, err=%d\n", ret); + goto free_urs; + } + + ret = dwc3_qcom_interconnect_init(qcom); + if (ret) + goto depopulate; + + qcom->mode = usb_get_dr_mode(&qcom->dwc3->dev); + + /* enable vbus override for device mode */ + if (qcom->mode != USB_DR_MODE_HOST) + dwc3_qcom_vbus_override_enable(qcom, true); + + /* register extcon to override sw_vbus on Vbus change later */ + ret = dwc3_qcom_register_extcon(qcom); + if (ret) + goto interconnect_exit; + + wakeup_source = of_property_read_bool(dev->of_node, "wakeup-source"); + device_init_wakeup(&pdev->dev, wakeup_source); + device_init_wakeup(&qcom->dwc3->dev, wakeup_source); + + qcom->is_suspended = false; + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + pm_runtime_forbid(dev); + + return 0; + +interconnect_exit: + dwc3_qcom_interconnect_exit(qcom); +depopulate: + if (np) { + of_platform_depopulate(&pdev->dev); + } else { + device_remove_software_node(&qcom->dwc3->dev); + platform_device_del(qcom->dwc3); + } + platform_device_put(qcom->dwc3); +free_urs: + if (qcom->urs_usb) + dwc3_qcom_destroy_urs_usb_platdev(qcom->urs_usb); +clk_disable: + for (i = qcom->num_clocks - 1; i >= 0; i--) { + clk_disable_unprepare(qcom->clks[i]); + clk_put(qcom->clks[i]); + } +reset_assert: + reset_control_assert(qcom->resets); + + return ret; +} + +static void dwc3_qcom_remove(struct platform_device *pdev) +{ + struct dwc3_qcom *qcom = platform_get_drvdata(pdev); + struct device_node *np = pdev->dev.of_node; + struct device *dev = &pdev->dev; + int i; + + if (np) { + of_platform_depopulate(&pdev->dev); + } else { + device_remove_software_node(&qcom->dwc3->dev); + platform_device_del(qcom->dwc3); + } + platform_device_put(qcom->dwc3); + + if (qcom->urs_usb) + dwc3_qcom_destroy_urs_usb_platdev(qcom->urs_usb); + + for (i = qcom->num_clocks - 1; i >= 0; i--) { + clk_disable_unprepare(qcom->clks[i]); + clk_put(qcom->clks[i]); + } + qcom->num_clocks = 0; + + dwc3_qcom_interconnect_exit(qcom); + reset_control_assert(qcom->resets); + + pm_runtime_allow(dev); + pm_runtime_disable(dev); +} + +static int __maybe_unused dwc3_qcom_pm_suspend(struct device *dev) +{ + struct dwc3_qcom *qcom = dev_get_drvdata(dev); + bool wakeup = device_may_wakeup(dev); + int ret; + + ret = dwc3_qcom_suspend(qcom, wakeup); + if (ret) + return ret; + + qcom->pm_suspended = true; + + return 0; +} + +static int __maybe_unused dwc3_qcom_pm_resume(struct device *dev) +{ + struct dwc3_qcom *qcom = dev_get_drvdata(dev); + bool wakeup = device_may_wakeup(dev); + int ret; + + ret = dwc3_qcom_resume(qcom, wakeup); + if (ret) + return ret; + + qcom->pm_suspended = false; + + return 0; +} + +static int __maybe_unused dwc3_qcom_runtime_suspend(struct device *dev) +{ + struct dwc3_qcom *qcom = dev_get_drvdata(dev); + + return dwc3_qcom_suspend(qcom, true); +} + +static int __maybe_unused dwc3_qcom_runtime_resume(struct device *dev) +{ + struct dwc3_qcom *qcom = dev_get_drvdata(dev); + + return dwc3_qcom_resume(qcom, true); +} + +static const struct dev_pm_ops dwc3_qcom_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(dwc3_qcom_pm_suspend, dwc3_qcom_pm_resume) + SET_RUNTIME_PM_OPS(dwc3_qcom_runtime_suspend, dwc3_qcom_runtime_resume, + NULL) +}; + +static const struct of_device_id dwc3_qcom_of_match[] = { + { .compatible = "qcom,dwc3" }, + { } +}; +MODULE_DEVICE_TABLE(of, dwc3_qcom_of_match); + +#ifdef CONFIG_ACPI +static const struct dwc3_acpi_pdata sdm845_acpi_pdata = { + .qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET, + .qscratch_base_size = SDM845_QSCRATCH_SIZE, + .dwc3_core_base_size = SDM845_DWC3_CORE_SIZE, + .hs_phy_irq_index = 1, + .dp_hs_phy_irq_index = 4, + .dm_hs_phy_irq_index = 3, + .ss_phy_irq_index = 2 +}; + +static const struct dwc3_acpi_pdata sdm845_acpi_urs_pdata = { + .qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET, + .qscratch_base_size = SDM845_QSCRATCH_SIZE, + .dwc3_core_base_size = SDM845_DWC3_CORE_SIZE, + .hs_phy_irq_index = 1, + .dp_hs_phy_irq_index = 4, + .dm_hs_phy_irq_index = 3, + .ss_phy_irq_index = 2, + .is_urs = true, +}; + +static const struct acpi_device_id dwc3_qcom_acpi_match[] = { + { "QCOM2430", (unsigned long)&sdm845_acpi_pdata }, + { "QCOM0304", (unsigned long)&sdm845_acpi_urs_pdata }, + { "QCOM0497", (unsigned long)&sdm845_acpi_urs_pdata }, + { "QCOM04A6", (unsigned long)&sdm845_acpi_pdata }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, dwc3_qcom_acpi_match); +#endif + +static struct platform_driver dwc3_qcom_driver = { + .probe = dwc3_qcom_probe, + .remove_new = dwc3_qcom_remove, + .driver = { + .name = "dwc3-qcom", + .pm = &dwc3_qcom_dev_pm_ops, + .of_match_table = dwc3_qcom_of_match, + .acpi_match_table = ACPI_PTR(dwc3_qcom_acpi_match), + }, +}; + +module_platform_driver(dwc3_qcom_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("DesignWare DWC3 QCOM Glue Driver"); |