diff options
Diffstat (limited to 'drivers/usb/dwc3/gadget.c')
| -rw-r--r-- | drivers/usb/dwc3/gadget.c | 91 |
1 files changed, 39 insertions, 52 deletions
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 579d90efc2..89fc690fdf 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -519,77 +519,56 @@ static void dwc3_free_trb_pool(struct dwc3_ep *dep) static int dwc3_gadget_set_xfer_resource(struct dwc3_ep *dep) { struct dwc3_gadget_ep_cmd_params params; + int ret; + + if (dep->flags & DWC3_EP_RESOURCE_ALLOCATED) + return 0; memset(¶ms, 0x00, sizeof(params)); params.param0 = DWC3_DEPXFERCFG_NUM_XFER_RES(1); - return dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETTRANSFRESOURCE, + ret = dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETTRANSFRESOURCE, ¶ms); + if (ret) + return ret; + + dep->flags |= DWC3_EP_RESOURCE_ALLOCATED; + return 0; } /** - * dwc3_gadget_start_config - configure ep resources - * @dep: endpoint that is being enabled - * - * Issue a %DWC3_DEPCMD_DEPSTARTCFG command to @dep. After the command's - * completion, it will set Transfer Resource for all available endpoints. - * - * The assignment of transfer resources cannot perfectly follow the data book - * due to the fact that the controller driver does not have all knowledge of the - * configuration in advance. It is given this information piecemeal by the - * composite gadget framework after every SET_CONFIGURATION and - * SET_INTERFACE. Trying to follow the databook programming model in this - * scenario can cause errors. For two reasons: - * - * 1) The databook says to do %DWC3_DEPCMD_DEPSTARTCFG for every - * %USB_REQ_SET_CONFIGURATION and %USB_REQ_SET_INTERFACE (8.1.5). This is - * incorrect in the scenario of multiple interfaces. - * - * 2) The databook does not mention doing more %DWC3_DEPCMD_DEPXFERCFG for new - * endpoint on alt setting (8.1.6). - * - * The following simplified method is used instead: + * dwc3_gadget_start_config - reset endpoint resources + * @dwc: pointer to the DWC3 context + * @resource_index: DEPSTARTCFG.XferRscIdx value (must be 0 or 2) * - * All hardware endpoints can be assigned a transfer resource and this setting - * will stay persistent until either a core reset or hibernation. So whenever we - * do a %DWC3_DEPCMD_DEPSTARTCFG(0) we can go ahead and do - * %DWC3_DEPCMD_DEPXFERCFG for every hardware endpoint as well. We are - * guaranteed that there are as many transfer resources as endpoints. + * Set resource_index=0 to reset all endpoints' resources allocation. Do this as + * part of the power-on/soft-reset initialization. * - * This function is called for each endpoint when it is being enabled but is - * triggered only when called for EP0-out, which always happens first, and which - * should only happen in one of the above conditions. + * Set resource_index=2 to reset only non-control endpoints' resources. Do this + * on receiving the SET_CONFIGURATION request or hibernation resume. */ -static int dwc3_gadget_start_config(struct dwc3_ep *dep) +int dwc3_gadget_start_config(struct dwc3 *dwc, unsigned int resource_index) { struct dwc3_gadget_ep_cmd_params params; - struct dwc3 *dwc; u32 cmd; int i; int ret; - if (dep->number) - return 0; + if (resource_index != 0 && resource_index != 2) + return -EINVAL; memset(¶ms, 0x00, sizeof(params)); cmd = DWC3_DEPCMD_DEPSTARTCFG; - dwc = dep->dwc; + cmd |= DWC3_DEPCMD_PARAM(resource_index); - ret = dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms); + ret = dwc3_send_gadget_ep_cmd(dwc->eps[0], cmd, ¶ms); if (ret) return ret; - for (i = 0; i < DWC3_ENDPOINTS_NUM; i++) { - struct dwc3_ep *dep = dwc->eps[i]; - - if (!dep) - continue; - - ret = dwc3_gadget_set_xfer_resource(dep); - if (ret) - return ret; - } + /* Reset resource allocation flags */ + for (i = resource_index; i < dwc->num_eps && dwc->eps[i]; i++) + dwc->eps[i]->flags &= ~DWC3_EP_RESOURCE_ALLOCATED; return 0; } @@ -884,16 +863,18 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, unsigned int action) ret = dwc3_gadget_resize_tx_fifos(dep); if (ret) return ret; - - ret = dwc3_gadget_start_config(dep); - if (ret) - return ret; } ret = dwc3_gadget_set_ep_config(dep, action); if (ret) return ret; + if (!(dep->flags & DWC3_EP_RESOURCE_ALLOCATED)) { + ret = dwc3_gadget_set_xfer_resource(dep); + if (ret) + return ret; + } + if (!(dep->flags & DWC3_EP_ENABLED)) { struct dwc3_trb *trb_st_hw; struct dwc3_trb *trb_link; @@ -1047,7 +1028,7 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep) dep->stream_capable = false; dep->type = 0; - mask = DWC3_EP_TXFIFO_RESIZED; + mask = DWC3_EP_TXFIFO_RESIZED | DWC3_EP_RESOURCE_ALLOCATED; /* * dwc3_remove_requests() can exit early if DWC3 EP delayed stop is * set. Do not clear DEP flags, so that the end transfer command will @@ -2911,6 +2892,12 @@ static int __dwc3_gadget_start(struct dwc3 *dwc) /* Start with SuperSpeed Default */ dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); + ret = dwc3_gadget_start_config(dwc, 0); + if (ret) { + dev_err(dwc->dev, "failed to config endpoints\n"); + return ret; + } + dep = dwc->eps[0]; dep->flags = 0; ret = __dwc3_gadget_ep_enable(dep, DWC3_DEPCFG_ACTION_INIT); @@ -3433,7 +3420,7 @@ static int dwc3_gadget_ep_reclaim_trb_sg(struct dwc3_ep *dep, struct dwc3_request *req, const struct dwc3_event_depevt *event, int status) { - struct dwc3_trb *trb = &dep->trb_pool[dep->trb_dequeue]; + struct dwc3_trb *trb; struct scatterlist *sg = req->sg; struct scatterlist *s; unsigned int num_queued = req->num_queued_sgs; |