diff options
Diffstat (limited to 'drivers/usb/gadget/udc/bdc/bdc_core.c')
-rw-r--r-- | drivers/usb/gadget/udc/bdc/bdc_core.c | 656 |
1 files changed, 656 insertions, 0 deletions
diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c b/drivers/usb/gadget/udc/bdc/bdc_core.c new file mode 100644 index 0000000000..35a652807f --- /dev/null +++ b/drivers/usb/gadget/udc/bdc/bdc_core.c @@ -0,0 +1,656 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * bdc_core.c - BRCM BDC USB3.0 device controller core operations + * + * Copyright (C) 2014 Broadcom Corporation + * + * Author: Ashwini Pahuja + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/iopoll.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/list.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/dmapool.h> +#include <linux/of.h> +#include <linux/phy/phy.h> +#include <linux/moduleparam.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/clk.h> + +#include "bdc.h" +#include "bdc_dbg.h" + +/* Poll till controller status is not OIP */ +static int poll_oip(struct bdc *bdc, u32 usec) +{ + u32 status; + int ret; + + ret = readl_poll_timeout(bdc->regs + BDC_BDCSC, status, + (BDC_CSTS(status) != BDC_OIP), 10, usec); + if (ret) + dev_err(bdc->dev, "operation timedout BDCSC: 0x%08x\n", status); + else + dev_dbg(bdc->dev, "%s complete status=%d", __func__, BDC_CSTS(status)); + + return ret; +} + +/* Stop the BDC controller */ +int bdc_stop(struct bdc *bdc) +{ + int ret; + u32 temp; + + dev_dbg(bdc->dev, "%s ()\n\n", __func__); + temp = bdc_readl(bdc->regs, BDC_BDCSC); + /* Check if BDC is already halted */ + if (BDC_CSTS(temp) == BDC_HLT) { + dev_vdbg(bdc->dev, "BDC already halted\n"); + return 0; + } + temp &= ~BDC_COP_MASK; + temp |= BDC_COS|BDC_COP_STP; + bdc_writel(bdc->regs, BDC_BDCSC, temp); + + ret = poll_oip(bdc, BDC_COP_TIMEOUT); + if (ret) + dev_err(bdc->dev, "bdc stop operation failed"); + + return ret; +} + +/* Issue a reset to BDC controller */ +int bdc_reset(struct bdc *bdc) +{ + u32 temp; + int ret; + + dev_dbg(bdc->dev, "%s ()\n", __func__); + /* First halt the controller */ + ret = bdc_stop(bdc); + if (ret) + return ret; + + temp = bdc_readl(bdc->regs, BDC_BDCSC); + temp &= ~BDC_COP_MASK; + temp |= BDC_COS|BDC_COP_RST; + bdc_writel(bdc->regs, BDC_BDCSC, temp); + ret = poll_oip(bdc, BDC_COP_TIMEOUT); + if (ret) + dev_err(bdc->dev, "bdc reset operation failed"); + + return ret; +} + +/* Run the BDC controller */ +int bdc_run(struct bdc *bdc) +{ + u32 temp; + int ret; + + dev_dbg(bdc->dev, "%s ()\n", __func__); + temp = bdc_readl(bdc->regs, BDC_BDCSC); + /* if BDC is already in running state then do not do anything */ + if (BDC_CSTS(temp) == BDC_NOR) { + dev_warn(bdc->dev, "bdc is already in running state\n"); + return 0; + } + temp &= ~BDC_COP_MASK; + temp |= BDC_COP_RUN; + temp |= BDC_COS; + bdc_writel(bdc->regs, BDC_BDCSC, temp); + ret = poll_oip(bdc, BDC_COP_TIMEOUT); + if (ret) { + dev_err(bdc->dev, "bdc run operation failed:%d", ret); + return ret; + } + temp = bdc_readl(bdc->regs, BDC_BDCSC); + if (BDC_CSTS(temp) != BDC_NOR) { + dev_err(bdc->dev, "bdc not in normal mode after RUN op :%d\n", + BDC_CSTS(temp)); + return -ESHUTDOWN; + } + + return 0; +} + +/* + * Present the termination to the host, typically called from upstream port + * event with Vbus present =1 + */ +void bdc_softconn(struct bdc *bdc) +{ + u32 uspc; + + uspc = bdc_readl(bdc->regs, BDC_USPC); + uspc &= ~BDC_PST_MASK; + uspc |= BDC_LINK_STATE_RX_DET; + uspc |= BDC_SWS; + dev_dbg(bdc->dev, "%s () uspc=%08x\n", __func__, uspc); + bdc_writel(bdc->regs, BDC_USPC, uspc); +} + +/* Remove the termination */ +void bdc_softdisconn(struct bdc *bdc) +{ + u32 uspc; + + uspc = bdc_readl(bdc->regs, BDC_USPC); + uspc |= BDC_SDC; + uspc &= ~BDC_SCN; + dev_dbg(bdc->dev, "%s () uspc=%x\n", __func__, uspc); + bdc_writel(bdc->regs, BDC_USPC, uspc); +} + +/* Set up the scratchpad buffer array and scratchpad buffers, if needed. */ +static int scratchpad_setup(struct bdc *bdc) +{ + int sp_buff_size; + u32 low32; + u32 upp32; + + sp_buff_size = BDC_SPB(bdc_readl(bdc->regs, BDC_BDCCFG0)); + dev_dbg(bdc->dev, "%s() sp_buff_size=%d\n", __func__, sp_buff_size); + if (!sp_buff_size) { + dev_dbg(bdc->dev, "Scratchpad buffer not needed\n"); + return 0; + } + /* Refer to BDC spec, Table 4 for description of SPB */ + sp_buff_size = 1 << (sp_buff_size + 5); + dev_dbg(bdc->dev, "Allocating %d bytes for scratchpad\n", sp_buff_size); + bdc->scratchpad.buff = dma_alloc_coherent(bdc->dev, sp_buff_size, + &bdc->scratchpad.sp_dma, + GFP_KERNEL); + + if (!bdc->scratchpad.buff) + goto fail; + + bdc->sp_buff_size = sp_buff_size; + bdc->scratchpad.size = sp_buff_size; + low32 = lower_32_bits(bdc->scratchpad.sp_dma); + upp32 = upper_32_bits(bdc->scratchpad.sp_dma); + cpu_to_le32s(&low32); + cpu_to_le32s(&upp32); + bdc_writel(bdc->regs, BDC_SPBBAL, low32); + bdc_writel(bdc->regs, BDC_SPBBAH, upp32); + return 0; + +fail: + bdc->scratchpad.buff = NULL; + + return -ENOMEM; +} + +/* Allocate the status report ring */ +static int setup_srr(struct bdc *bdc, int interrupter) +{ + dev_dbg(bdc->dev, "%s() NUM_SR_ENTRIES:%d\n", __func__, NUM_SR_ENTRIES); + /* Reset the SRR */ + bdc_writel(bdc->regs, BDC_SRRINT(0), BDC_SRR_RWS | BDC_SRR_RST); + bdc->srr.dqp_index = 0; + /* allocate the status report descriptors */ + bdc->srr.sr_bds = dma_alloc_coherent(bdc->dev, + NUM_SR_ENTRIES * sizeof(struct bdc_bd), + &bdc->srr.dma_addr, GFP_KERNEL); + if (!bdc->srr.sr_bds) + return -ENOMEM; + + return 0; +} + +/* Initialize the HW regs and internal data structures */ +static void bdc_mem_init(struct bdc *bdc, bool reinit) +{ + u8 size = 0; + u32 usb2_pm; + u32 low32; + u32 upp32; + u32 temp; + + dev_dbg(bdc->dev, "%s ()\n", __func__); + bdc->ep0_state = WAIT_FOR_SETUP; + bdc->dev_addr = 0; + bdc->srr.eqp_index = 0; + bdc->srr.dqp_index = 0; + bdc->zlp_needed = false; + bdc->delayed_status = false; + + bdc_writel(bdc->regs, BDC_SPBBAL, bdc->scratchpad.sp_dma); + /* Init the SRR */ + temp = BDC_SRR_RWS | BDC_SRR_RST; + /* Reset the SRR */ + bdc_writel(bdc->regs, BDC_SRRINT(0), temp); + dev_dbg(bdc->dev, "bdc->srr.sr_bds =%p\n", bdc->srr.sr_bds); + temp = lower_32_bits(bdc->srr.dma_addr); + size = fls(NUM_SR_ENTRIES) - 2; + temp |= size; + dev_dbg(bdc->dev, "SRRBAL[0]=%08x NUM_SR_ENTRIES:%d size:%d\n", + temp, NUM_SR_ENTRIES, size); + + low32 = lower_32_bits(temp); + upp32 = upper_32_bits(bdc->srr.dma_addr); + cpu_to_le32s(&low32); + cpu_to_le32s(&upp32); + + /* Write the dma addresses into regs*/ + bdc_writel(bdc->regs, BDC_SRRBAL(0), low32); + bdc_writel(bdc->regs, BDC_SRRBAH(0), upp32); + + temp = bdc_readl(bdc->regs, BDC_SRRINT(0)); + temp |= BDC_SRR_IE; + temp &= ~(BDC_SRR_RST | BDC_SRR_RWS); + bdc_writel(bdc->regs, BDC_SRRINT(0), temp); + + /* Set the Interrupt Coalescence ~500 usec */ + temp = bdc_readl(bdc->regs, BDC_INTCTLS(0)); + temp &= ~0xffff; + temp |= INT_CLS; + bdc_writel(bdc->regs, BDC_INTCTLS(0), temp); + + usb2_pm = bdc_readl(bdc->regs, BDC_USPPM2); + dev_dbg(bdc->dev, "usb2_pm=%08x", usb2_pm); + /* Enable hardware LPM Enable */ + usb2_pm |= BDC_HLE; + bdc_writel(bdc->regs, BDC_USPPM2, usb2_pm); + + /* readback for debug */ + usb2_pm = bdc_readl(bdc->regs, BDC_USPPM2); + dev_dbg(bdc->dev, "usb2_pm=%08x\n", usb2_pm); + + /* Disable any unwanted SR's on SRR */ + temp = bdc_readl(bdc->regs, BDC_BDCSC); + /* We don't want Microframe counter wrap SR */ + temp |= BDC_MASK_MCW; + bdc_writel(bdc->regs, BDC_BDCSC, temp); + + /* + * In some error cases, driver has to reset the entire BDC controller + * in that case reinit is passed as 1 + */ + if (reinit) { + int i; + /* Enable interrupts */ + temp = bdc_readl(bdc->regs, BDC_BDCSC); + temp |= BDC_GIE; + bdc_writel(bdc->regs, BDC_BDCSC, temp); + /* Init scratchpad to 0 */ + memset(bdc->scratchpad.buff, 0, bdc->sp_buff_size); + /* Initialize SRR to 0 */ + memset(bdc->srr.sr_bds, 0, + NUM_SR_ENTRIES * sizeof(struct bdc_bd)); + /* + * clear ep flags to avoid post disconnect stops/deconfigs but + * not during S2 exit + */ + if (!bdc->gadget.speed) + for (i = 1; i < bdc->num_eps; ++i) + bdc->bdc_ep_array[i]->flags = 0; + } else { + /* One time initiaization only */ + /* Enable status report function pointers */ + bdc->sr_handler[0] = bdc_sr_xsf; + bdc->sr_handler[1] = bdc_sr_uspc; + + /* EP0 status report function pointers */ + bdc->sr_xsf_ep0[0] = bdc_xsf_ep0_setup_recv; + bdc->sr_xsf_ep0[1] = bdc_xsf_ep0_data_start; + bdc->sr_xsf_ep0[2] = bdc_xsf_ep0_status_start; + } +} + +/* Free the dynamic memory */ +static void bdc_mem_free(struct bdc *bdc) +{ + dev_dbg(bdc->dev, "%s\n", __func__); + /* Free SRR */ + if (bdc->srr.sr_bds) + dma_free_coherent(bdc->dev, + NUM_SR_ENTRIES * sizeof(struct bdc_bd), + bdc->srr.sr_bds, bdc->srr.dma_addr); + + /* Free scratchpad */ + if (bdc->scratchpad.buff) + dma_free_coherent(bdc->dev, bdc->sp_buff_size, + bdc->scratchpad.buff, bdc->scratchpad.sp_dma); + + /* Destroy the dma pools */ + dma_pool_destroy(bdc->bd_table_pool); + + /* Free the bdc_ep array */ + kfree(bdc->bdc_ep_array); + + bdc->srr.sr_bds = NULL; + bdc->scratchpad.buff = NULL; + bdc->bd_table_pool = NULL; + bdc->bdc_ep_array = NULL; +} + +/* + * bdc reinit gives a controller reset and reinitialize the registers, + * called from disconnect/bus reset scenario's, to ensure proper HW cleanup + */ +int bdc_reinit(struct bdc *bdc) +{ + int ret; + + dev_dbg(bdc->dev, "%s\n", __func__); + ret = bdc_stop(bdc); + if (ret) + goto out; + + ret = bdc_reset(bdc); + if (ret) + goto out; + + /* the reinit flag is 1 */ + bdc_mem_init(bdc, true); + ret = bdc_run(bdc); +out: + bdc->reinit = false; + + return ret; +} + +/* Allocate all the dyanmic memory */ +static int bdc_mem_alloc(struct bdc *bdc) +{ + u32 page_size; + unsigned int num_ieps, num_oeps; + + dev_dbg(bdc->dev, + "%s() NUM_BDS_PER_TABLE:%d\n", __func__, + NUM_BDS_PER_TABLE); + page_size = BDC_PGS(bdc_readl(bdc->regs, BDC_BDCCFG0)); + /* page size is 2^pgs KB */ + page_size = 1 << page_size; + /* KB */ + page_size <<= 10; + dev_dbg(bdc->dev, "page_size=%d\n", page_size); + + /* Create a pool of bd tables */ + bdc->bd_table_pool = + dma_pool_create("BDC BD tables", bdc->dev, NUM_BDS_PER_TABLE * 16, + 16, page_size); + + if (!bdc->bd_table_pool) + goto fail; + + if (scratchpad_setup(bdc)) + goto fail; + + /* read from regs */ + num_ieps = NUM_NCS(bdc_readl(bdc->regs, BDC_FSCNIC)); + num_oeps = NUM_NCS(bdc_readl(bdc->regs, BDC_FSCNOC)); + /* +2: 1 for ep0 and the other is rsvd i.e. bdc_ep[0] is rsvd */ + bdc->num_eps = num_ieps + num_oeps + 2; + dev_dbg(bdc->dev, + "ieps:%d eops:%d num_eps:%d\n", + num_ieps, num_oeps, bdc->num_eps); + /* allocate array of ep pointers */ + bdc->bdc_ep_array = kcalloc(bdc->num_eps, sizeof(struct bdc_ep *), + GFP_KERNEL); + if (!bdc->bdc_ep_array) + goto fail; + + dev_dbg(bdc->dev, "Allocating sr report0\n"); + if (setup_srr(bdc, 0)) + goto fail; + + return 0; +fail: + dev_warn(bdc->dev, "Couldn't initialize memory\n"); + bdc_mem_free(bdc); + + return -ENOMEM; +} + +/* opposite to bdc_hw_init */ +static void bdc_hw_exit(struct bdc *bdc) +{ + dev_dbg(bdc->dev, "%s ()\n", __func__); + bdc_mem_free(bdc); +} + +/* Initialize the bdc HW and memory */ +static int bdc_hw_init(struct bdc *bdc) +{ + int ret; + + dev_dbg(bdc->dev, "%s ()\n", __func__); + ret = bdc_reset(bdc); + if (ret) { + dev_err(bdc->dev, "err resetting bdc abort bdc init%d\n", ret); + return ret; + } + ret = bdc_mem_alloc(bdc); + if (ret) { + dev_err(bdc->dev, "Mem alloc failed, aborting\n"); + return -ENOMEM; + } + bdc_mem_init(bdc, 0); + bdc_dbg_regs(bdc); + dev_dbg(bdc->dev, "HW Init done\n"); + + return 0; +} + +static int bdc_phy_init(struct bdc *bdc) +{ + int phy_num; + int ret; + + for (phy_num = 0; phy_num < bdc->num_phys; phy_num++) { + ret = phy_init(bdc->phys[phy_num]); + if (ret) + goto err_exit_phy; + ret = phy_power_on(bdc->phys[phy_num]); + if (ret) { + phy_exit(bdc->phys[phy_num]); + goto err_exit_phy; + } + } + + return 0; + +err_exit_phy: + while (--phy_num >= 0) { + phy_power_off(bdc->phys[phy_num]); + phy_exit(bdc->phys[phy_num]); + } + + return ret; +} + +static void bdc_phy_exit(struct bdc *bdc) +{ + int phy_num; + + for (phy_num = 0; phy_num < bdc->num_phys; phy_num++) { + phy_power_off(bdc->phys[phy_num]); + phy_exit(bdc->phys[phy_num]); + } +} + +static int bdc_probe(struct platform_device *pdev) +{ + struct bdc *bdc; + int ret; + int irq; + u32 temp; + struct device *dev = &pdev->dev; + int phy_num; + + dev_dbg(dev, "%s()\n", __func__); + + bdc = devm_kzalloc(dev, sizeof(*bdc), GFP_KERNEL); + if (!bdc) + return -ENOMEM; + + bdc->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(bdc->regs)) + return PTR_ERR(bdc->regs); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + spin_lock_init(&bdc->lock); + platform_set_drvdata(pdev, bdc); + bdc->irq = irq; + bdc->dev = dev; + dev_dbg(dev, "bdc->regs: %p irq=%d\n", bdc->regs, bdc->irq); + + bdc->num_phys = of_count_phandle_with_args(dev->of_node, + "phys", "#phy-cells"); + if (bdc->num_phys > 0) { + bdc->phys = devm_kcalloc(dev, bdc->num_phys, + sizeof(struct phy *), GFP_KERNEL); + if (!bdc->phys) + return -ENOMEM; + } else { + bdc->num_phys = 0; + } + dev_info(dev, "Using %d phy(s)\n", bdc->num_phys); + + for (phy_num = 0; phy_num < bdc->num_phys; phy_num++) { + bdc->phys[phy_num] = devm_of_phy_get_by_index( + dev, dev->of_node, phy_num); + if (IS_ERR(bdc->phys[phy_num])) { + ret = PTR_ERR(bdc->phys[phy_num]); + dev_err(bdc->dev, + "BDC phy specified but not found:%d\n", ret); + return ret; + } + } + + bdc->clk = devm_clk_get_optional(dev, "sw_usbd"); + if (IS_ERR(bdc->clk)) + return PTR_ERR(bdc->clk); + + ret = clk_prepare_enable(bdc->clk); + if (ret) { + dev_err(dev, "could not enable clock\n"); + return ret; + } + + ret = bdc_phy_init(bdc); + if (ret) { + dev_err(bdc->dev, "BDC phy init failure:%d\n", ret); + goto disable_clk; + } + + temp = bdc_readl(bdc->regs, BDC_BDCCAP1); + if ((temp & BDC_P64) && + !dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64))) { + dev_dbg(dev, "Using 64-bit address\n"); + } else { + ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32)); + if (ret) { + dev_err(dev, + "No suitable DMA config available, abort\n"); + ret = -ENOTSUPP; + goto phycleanup; + } + dev_dbg(dev, "Using 32-bit address\n"); + } + ret = bdc_hw_init(bdc); + if (ret) { + dev_err(dev, "BDC init failure:%d\n", ret); + goto phycleanup; + } + ret = bdc_udc_init(bdc); + if (ret) { + dev_err(dev, "BDC Gadget init failure:%d\n", ret); + goto cleanup; + } + return 0; + +cleanup: + bdc_hw_exit(bdc); +phycleanup: + bdc_phy_exit(bdc); +disable_clk: + clk_disable_unprepare(bdc->clk); + return ret; +} + +static void bdc_remove(struct platform_device *pdev) +{ + struct bdc *bdc; + + bdc = platform_get_drvdata(pdev); + dev_dbg(bdc->dev, "%s ()\n", __func__); + bdc_udc_exit(bdc); + bdc_hw_exit(bdc); + bdc_phy_exit(bdc); + clk_disable_unprepare(bdc->clk); +} + +#ifdef CONFIG_PM_SLEEP +static int bdc_suspend(struct device *dev) +{ + struct bdc *bdc = dev_get_drvdata(dev); + int ret; + + /* Halt the controller */ + ret = bdc_stop(bdc); + if (!ret) + clk_disable_unprepare(bdc->clk); + + return ret; +} + +static int bdc_resume(struct device *dev) +{ + struct bdc *bdc = dev_get_drvdata(dev); + int ret; + + ret = clk_prepare_enable(bdc->clk); + if (ret) { + dev_err(bdc->dev, "err enabling the clock\n"); + return ret; + } + ret = bdc_reinit(bdc); + if (ret) { + dev_err(bdc->dev, "err in bdc reinit\n"); + clk_disable_unprepare(bdc->clk); + return ret; + } + + return 0; +} + +#endif /* CONFIG_PM_SLEEP */ + +static SIMPLE_DEV_PM_OPS(bdc_pm_ops, bdc_suspend, + bdc_resume); + +static const struct of_device_id bdc_of_match[] = { + { .compatible = "brcm,bdc-udc-v2" }, + { .compatible = "brcm,bdc" }, + { /* sentinel */ } +}; + +static struct platform_driver bdc_driver = { + .driver = { + .name = BRCM_BDC_NAME, + .pm = &bdc_pm_ops, + .of_match_table = bdc_of_match, + }, + .probe = bdc_probe, + .remove_new = bdc_remove, +}; + +module_platform_driver(bdc_driver); +MODULE_AUTHOR("Ashwini Pahuja <ashwini.linux@gmail.com>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(BRCM_BDC_DESC); |