diff options
Diffstat (limited to 'drivers/usb/host/ehci.h')
| -rw-r--r-- | drivers/usb/host/ehci.h | 907 |
1 files changed, 907 insertions, 0 deletions
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h new file mode 100644 index 0000000000..1441e34007 --- /dev/null +++ b/drivers/usb/host/ehci.h @@ -0,0 +1,907 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (c) 2001-2002 by David Brownell + */ + +#ifndef __LINUX_EHCI_HCD_H +#define __LINUX_EHCI_HCD_H + +/* definitions used for the EHCI driver */ + +/* + * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to + * __leXX (normally) or __beXX (given EHCI_BIG_ENDIAN_DESC), depending on + * the host controller implementation. + * + * To facilitate the strongest possible byte-order checking from "sparse" + * and so on, we use __leXX unless that's not practical. + */ +#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_DESC +typedef __u32 __bitwise __hc32; +typedef __u16 __bitwise __hc16; +#else +#define __hc32 __le32 +#define __hc16 __le16 +#endif + +/* statistics can be kept for tuning/monitoring */ +#ifdef CONFIG_DYNAMIC_DEBUG +#define EHCI_STATS +#endif + +struct ehci_stats { + /* irq usage */ + unsigned long normal; + unsigned long error; + unsigned long iaa; + unsigned long lost_iaa; + + /* termination of urbs from core */ + unsigned long complete; + unsigned long unlink; +}; + +/* + * Scheduling and budgeting information for periodic transfers, for both + * high-speed devices and full/low-speed devices lying behind a TT. + */ +struct ehci_per_sched { + struct usb_device *udev; /* access to the TT */ + struct usb_host_endpoint *ep; + struct list_head ps_list; /* node on ehci_tt's ps_list */ + u16 tt_usecs; /* time on the FS/LS bus */ + u16 cs_mask; /* C-mask and S-mask bytes */ + u16 period; /* actual period in frames */ + u16 phase; /* actual phase, frame part */ + u8 bw_phase; /* same, for bandwidth + reservation */ + u8 phase_uf; /* uframe part of the phase */ + u8 usecs, c_usecs; /* times on the HS bus */ + u8 bw_uperiod; /* period in microframes, for + bandwidth reservation */ + u8 bw_period; /* same, in frames */ +}; +#define NO_FRAME 29999 /* frame not assigned yet */ + +/* ehci_hcd->lock guards shared data against other CPUs: + * ehci_hcd: async, unlink, periodic (and shadow), ... + * usb_host_endpoint: hcpriv + * ehci_qh: qh_next, qtd_list + * ehci_qtd: qtd_list + * + * Also, hold this lock when talking to HC registers or + * when updating hw_* fields in shared qh/qtd/... structures. + */ + +#define EHCI_MAX_ROOT_PORTS 15 /* see HCS_N_PORTS */ + +/* + * ehci_rh_state values of EHCI_RH_RUNNING or above mean that the + * controller may be doing DMA. Lower values mean there's no DMA. + */ +enum ehci_rh_state { + EHCI_RH_HALTED, + EHCI_RH_SUSPENDED, + EHCI_RH_RUNNING, + EHCI_RH_STOPPING +}; + +/* + * Timer events, ordered by increasing delay length. + * Always update event_delays_ns[] and event_handlers[] (defined in + * ehci-timer.c) in parallel with this list. + */ +enum ehci_hrtimer_event { + EHCI_HRTIMER_POLL_ASS, /* Poll for async schedule off */ + EHCI_HRTIMER_POLL_PSS, /* Poll for periodic schedule off */ + EHCI_HRTIMER_POLL_DEAD, /* Wait for dead controller to stop */ + EHCI_HRTIMER_UNLINK_INTR, /* Wait for interrupt QH unlink */ + EHCI_HRTIMER_FREE_ITDS, /* Wait for unused iTDs and siTDs */ + EHCI_HRTIMER_ACTIVE_UNLINK, /* Wait while unlinking an active QH */ + EHCI_HRTIMER_START_UNLINK_INTR, /* Unlink empty interrupt QHs */ + EHCI_HRTIMER_ASYNC_UNLINKS, /* Unlink empty async QHs */ + EHCI_HRTIMER_IAA_WATCHDOG, /* Handle lost IAA interrupts */ + EHCI_HRTIMER_DISABLE_PERIODIC, /* Wait to disable periodic sched */ + EHCI_HRTIMER_DISABLE_ASYNC, /* Wait to disable async sched */ + EHCI_HRTIMER_IO_WATCHDOG, /* Check for missing IRQs */ + EHCI_HRTIMER_NUM_EVENTS /* Must come last */ +}; +#define EHCI_HRTIMER_NO_EVENT 99 + +struct ehci_hcd { /* one per controller */ + /* timing support */ + enum ehci_hrtimer_event next_hrtimer_event; + unsigned enabled_hrtimer_events; + ktime_t hr_timeouts[EHCI_HRTIMER_NUM_EVENTS]; + struct hrtimer hrtimer; + + int PSS_poll_count; + int ASS_poll_count; + int died_poll_count; + + /* glue to PCI and HCD framework */ + struct ehci_caps __iomem *caps; + struct ehci_regs __iomem *regs; + struct ehci_dbg_port __iomem *debug; + + __u32 hcs_params; /* cached register copy */ + spinlock_t lock; + enum ehci_rh_state rh_state; + + /* general schedule support */ + bool scanning:1; + bool need_rescan:1; + bool intr_unlinking:1; + bool iaa_in_progress:1; + bool async_unlinking:1; + bool shutdown:1; + struct ehci_qh *qh_scan_next; + + /* async schedule support */ + struct ehci_qh *async; + struct ehci_qh *dummy; /* For AMD quirk use */ + struct list_head async_unlink; + struct list_head async_idle; + unsigned async_unlink_cycle; + unsigned async_count; /* async activity count */ + __hc32 old_current; /* Test for QH becoming */ + __hc32 old_token; /* inactive during unlink */ + + /* periodic schedule support */ +#define DEFAULT_I_TDPS 1024 /* some HCs can do less */ + unsigned periodic_size; + __hc32 *periodic; /* hw periodic table */ + dma_addr_t periodic_dma; + struct list_head intr_qh_list; + unsigned i_thresh; /* uframes HC might cache */ + + union ehci_shadow *pshadow; /* mirror hw periodic table */ + struct list_head intr_unlink_wait; + struct list_head intr_unlink; + unsigned intr_unlink_wait_cycle; + unsigned intr_unlink_cycle; + unsigned now_frame; /* frame from HC hardware */ + unsigned last_iso_frame; /* last frame scanned for iso */ + unsigned intr_count; /* intr activity count */ + unsigned isoc_count; /* isoc activity count */ + unsigned periodic_count; /* periodic activity count */ + unsigned uframe_periodic_max; /* max periodic time per uframe */ + + + /* list of itds & sitds completed while now_frame was still active */ + struct list_head cached_itd_list; + struct ehci_itd *last_itd_to_free; + struct list_head cached_sitd_list; + struct ehci_sitd *last_sitd_to_free; + + /* per root hub port */ + unsigned long reset_done[EHCI_MAX_ROOT_PORTS]; + + /* bit vectors (one bit per port) */ + unsigned long bus_suspended; /* which ports were + already suspended at the start of a bus suspend */ + unsigned long companion_ports; /* which ports are + dedicated to the companion controller */ + unsigned long owned_ports; /* which ports are + owned by the companion during a bus suspend */ + unsigned long port_c_suspend; /* which ports have + the change-suspend feature turned on */ + unsigned long suspended_ports; /* which ports are + suspended */ + unsigned long resuming_ports; /* which ports have + started to resume */ + + /* per-HC memory pools (could be per-bus, but ...) */ + struct dma_pool *qh_pool; /* qh per active urb */ + struct dma_pool *qtd_pool; /* one or more per qh */ + struct dma_pool *itd_pool; /* itd per iso urb */ + struct dma_pool *sitd_pool; /* sitd per split iso urb */ + + unsigned random_frame; + unsigned long next_statechange; + ktime_t last_periodic_enable; + u32 command; + + /* SILICON QUIRKS */ + unsigned no_selective_suspend:1; + unsigned has_fsl_port_bug:1; /* FreeScale */ + unsigned has_fsl_hs_errata:1; /* Freescale HS quirk */ + unsigned has_fsl_susp_errata:1; /* NXP SUSP quirk */ + unsigned has_ci_pec_bug:1; /* ChipIdea PEC bug */ + unsigned big_endian_mmio:1; + unsigned big_endian_desc:1; + unsigned big_endian_capbase:1; + unsigned has_amcc_usb23:1; + unsigned need_io_watchdog:1; + unsigned amd_pll_fix:1; + unsigned use_dummy_qh:1; /* AMD Frame List table quirk*/ + unsigned has_synopsys_hc_bug:1; /* Synopsys HC */ + unsigned frame_index_bug:1; /* MosChip (AKA NetMos) */ + unsigned need_oc_pp_cycle:1; /* MPC834X port power */ + unsigned imx28_write_fix:1; /* For Freescale i.MX28 */ + unsigned spurious_oc:1; + unsigned is_aspeed:1; + unsigned zx_wakeup_clear_needed:1; + + /* required for usb32 quirk */ + #define OHCI_CTRL_HCFS (3 << 6) + #define OHCI_USB_OPER (2 << 6) + #define OHCI_USB_SUSPEND (3 << 6) + + #define OHCI_HCCTRL_OFFSET 0x4 + #define OHCI_HCCTRL_LEN 0x4 + __hc32 *ohci_hcctrl_reg; + unsigned has_hostpc:1; + unsigned has_tdi_phy_lpm:1; + unsigned has_ppcd:1; /* support per-port change bits */ + u8 sbrn; /* packed release number */ + + /* irq statistics */ +#ifdef EHCI_STATS + struct ehci_stats stats; +# define INCR(x) ((x)++) +#else +# define INCR(x) do {} while (0) +#endif + + /* debug files */ +#ifdef CONFIG_DYNAMIC_DEBUG + struct dentry *debug_dir; +#endif + + /* bandwidth usage */ +#define EHCI_BANDWIDTH_SIZE 64 +#define EHCI_BANDWIDTH_FRAMES (EHCI_BANDWIDTH_SIZE >> 3) + u8 bandwidth[EHCI_BANDWIDTH_SIZE]; + /* us allocated per uframe */ + u8 tt_budget[EHCI_BANDWIDTH_SIZE]; + /* us budgeted per uframe */ + struct list_head tt_list; + + /* platform-specific data -- must come last */ + unsigned long priv[] __aligned(sizeof(s64)); +}; + +/* convert between an HCD pointer and the corresponding EHCI_HCD */ +static inline struct ehci_hcd *hcd_to_ehci(struct usb_hcd *hcd) +{ + return (struct ehci_hcd *) (hcd->hcd_priv); +} +static inline struct usb_hcd *ehci_to_hcd(struct ehci_hcd *ehci) +{ + return container_of((void *) ehci, struct usb_hcd, hcd_priv); +} + +/*-------------------------------------------------------------------------*/ + +#include <linux/usb/ehci_def.h> + +/*-------------------------------------------------------------------------*/ + +#define QTD_NEXT(ehci, dma) cpu_to_hc32(ehci, (u32)dma) + +/* + * EHCI Specification 0.95 Section 3.5 + * QTD: describe data transfer components (buffer, direction, ...) + * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram". + * + * These are associated only with "QH" (Queue Head) structures, + * used with control, bulk, and interrupt transfers. + */ +struct ehci_qtd { + /* first part defined by EHCI spec */ + __hc32 hw_next; /* see EHCI 3.5.1 */ + __hc32 hw_alt_next; /* see EHCI 3.5.2 */ + __hc32 hw_token; /* see EHCI 3.5.3 */ +#define QTD_TOGGLE (1 << 31) /* data toggle */ +#define QTD_LENGTH(tok) (((tok)>>16) & 0x7fff) +#define QTD_IOC (1 << 15) /* interrupt on complete */ +#define QTD_CERR(tok) (((tok)>>10) & 0x3) +#define QTD_PID(tok) (((tok)>>8) & 0x3) +#define QTD_STS_ACTIVE (1 << 7) /* HC may execute this */ +#define QTD_STS_HALT (1 << 6) /* halted on error */ +#define QTD_STS_DBE (1 << 5) /* data buffer error (in HC) */ +#define QTD_STS_BABBLE (1 << 4) /* device was babbling (qtd halted) */ +#define QTD_STS_XACT (1 << 3) /* device gave illegal response */ +#define QTD_STS_MMF (1 << 2) /* incomplete split transaction */ +#define QTD_STS_STS (1 << 1) /* split transaction state */ +#define QTD_STS_PING (1 << 0) /* issue PING? */ + +#define ACTIVE_BIT(ehci) cpu_to_hc32(ehci, QTD_STS_ACTIVE) +#define HALT_BIT(ehci) cpu_to_hc32(ehci, QTD_STS_HALT) +#define STATUS_BIT(ehci) cpu_to_hc32(ehci, QTD_STS_STS) + + __hc32 hw_buf[5]; /* see EHCI 3.5.4 */ + __hc32 hw_buf_hi[5]; /* Appendix B */ + + /* the rest is HCD-private */ + dma_addr_t qtd_dma; /* qtd address */ + struct list_head qtd_list; /* sw qtd list */ + struct urb *urb; /* qtd's urb */ + size_t length; /* length of buffer */ +} __aligned(32); + +/* mask NakCnt+T in qh->hw_alt_next */ +#define QTD_MASK(ehci) cpu_to_hc32(ehci, ~0x1f) + +#define IS_SHORT_READ(token) (QTD_LENGTH(token) != 0 && QTD_PID(token) == 1) + +/*-------------------------------------------------------------------------*/ + +/* type tag from {qh,itd,sitd,fstn}->hw_next */ +#define Q_NEXT_TYPE(ehci, dma) ((dma) & cpu_to_hc32(ehci, 3 << 1)) + +/* + * Now the following defines are not converted using the + * cpu_to_le32() macro anymore, since we have to support + * "dynamic" switching between be and le support, so that the driver + * can be used on one system with SoC EHCI controller using big-endian + * descriptors as well as a normal little-endian PCI EHCI controller. + */ +/* values for that type tag */ +#define Q_TYPE_ITD (0 << 1) +#define Q_TYPE_QH (1 << 1) +#define Q_TYPE_SITD (2 << 1) +#define Q_TYPE_FSTN (3 << 1) + +/* next async queue entry, or pointer to interrupt/periodic QH */ +#define QH_NEXT(ehci, dma) \ + (cpu_to_hc32(ehci, (((u32) dma) & ~0x01f) | Q_TYPE_QH)) + +/* for periodic/async schedules and qtd lists, mark end of list */ +#define EHCI_LIST_END(ehci) cpu_to_hc32(ehci, 1) /* "null pointer" to hw */ + +/* + * Entries in periodic shadow table are pointers to one of four kinds + * of data structure. That's dictated by the hardware; a type tag is + * encoded in the low bits of the hardware's periodic schedule. Use + * Q_NEXT_TYPE to get the tag. + * + * For entries in the async schedule, the type tag always says "qh". + */ +union ehci_shadow { + struct ehci_qh *qh; /* Q_TYPE_QH */ + struct ehci_itd *itd; /* Q_TYPE_ITD */ + struct ehci_sitd *sitd; /* Q_TYPE_SITD */ + struct ehci_fstn *fstn; /* Q_TYPE_FSTN */ + __hc32 *hw_next; /* (all types) */ + void *ptr; +}; + +/*-------------------------------------------------------------------------*/ + +/* + * EHCI Specification 0.95 Section 3.6 + * QH: describes control/bulk/interrupt endpoints + * See Fig 3-7 "Queue Head Structure Layout". + * + * These appear in both the async and (for interrupt) periodic schedules. + */ + +/* first part defined by EHCI spec */ +struct ehci_qh_hw { + __hc32 hw_next; /* see EHCI 3.6.1 */ + __hc32 hw_info1; /* see EHCI 3.6.2 */ +#define QH_CONTROL_EP (1 << 27) /* FS/LS control endpoint */ +#define QH_HEAD (1 << 15) /* Head of async reclamation list */ +#define QH_TOGGLE_CTL (1 << 14) /* Data toggle control */ +#define QH_HIGH_SPEED (2 << 12) /* Endpoint speed */ +#define QH_LOW_SPEED (1 << 12) +#define QH_FULL_SPEED (0 << 12) +#define QH_INACTIVATE (1 << 7) /* Inactivate on next transaction */ + __hc32 hw_info2; /* see EHCI 3.6.2 */ +#define QH_SMASK 0x000000ff +#define QH_CMASK 0x0000ff00 +#define QH_HUBADDR 0x007f0000 +#define QH_HUBPORT 0x3f800000 +#define QH_MULT 0xc0000000 + __hc32 hw_current; /* qtd list - see EHCI 3.6.4 */ + + /* qtd overlay (hardware parts of a struct ehci_qtd) */ + __hc32 hw_qtd_next; + __hc32 hw_alt_next; + __hc32 hw_token; + __hc32 hw_buf[5]; + __hc32 hw_buf_hi[5]; +} __aligned(32); + +struct ehci_qh { + struct ehci_qh_hw *hw; /* Must come first */ + /* the rest is HCD-private */ + dma_addr_t qh_dma; /* address of qh */ + union ehci_shadow qh_next; /* ptr to qh; or periodic */ + struct list_head qtd_list; /* sw qtd list */ + struct list_head intr_node; /* list of intr QHs */ + struct ehci_qtd *dummy; + struct list_head unlink_node; + struct ehci_per_sched ps; /* scheduling info */ + + unsigned unlink_cycle; + + u8 qh_state; +#define QH_STATE_LINKED 1 /* HC sees this */ +#define QH_STATE_UNLINK 2 /* HC may still see this */ +#define QH_STATE_IDLE 3 /* HC doesn't see this */ +#define QH_STATE_UNLINK_WAIT 4 /* LINKED and on unlink q */ +#define QH_STATE_COMPLETING 5 /* don't touch token.HALT */ + + u8 xacterrs; /* XactErr retry counter */ +#define QH_XACTERR_MAX 32 /* XactErr retry limit */ + + u8 unlink_reason; +#define QH_UNLINK_HALTED 0x01 /* Halt flag is set */ +#define QH_UNLINK_SHORT_READ 0x02 /* Recover from a short read */ +#define QH_UNLINK_DUMMY_OVERLAY 0x04 /* QH overlayed the dummy TD */ +#define QH_UNLINK_SHUTDOWN 0x08 /* The HC isn't running */ +#define QH_UNLINK_QUEUE_EMPTY 0x10 /* Reached end of the queue */ +#define QH_UNLINK_REQUESTED 0x20 /* Disable, reset, or dequeue */ + + u8 gap_uf; /* uframes split/csplit gap */ + + unsigned is_out:1; /* bulk or intr OUT */ + unsigned clearing_tt:1; /* Clear-TT-Buf in progress */ + unsigned dequeue_during_giveback:1; + unsigned should_be_inactive:1; +}; + +/*-------------------------------------------------------------------------*/ + +/* description of one iso transaction (up to 3 KB data if highspeed) */ +struct ehci_iso_packet { + /* These will be copied to iTD when scheduling */ + u64 bufp; /* itd->hw_bufp{,_hi}[pg] |= */ + __hc32 transaction; /* itd->hw_transaction[i] |= */ + u8 cross; /* buf crosses pages */ + /* for full speed OUT splits */ + u32 buf1; +}; + +/* temporary schedule data for packets from iso urbs (both speeds) + * each packet is one logical usb transaction to the device (not TT), + * beginning at stream->next_uframe + */ +struct ehci_iso_sched { + struct list_head td_list; + unsigned span; + unsigned first_packet; + struct ehci_iso_packet packet[]; +}; + +/* + * ehci_iso_stream - groups all (s)itds for this endpoint. + * acts like a qh would, if EHCI had them for ISO. + */ +struct ehci_iso_stream { + /* first field matches ehci_qh, but is NULL */ + struct ehci_qh_hw *hw; + + u8 bEndpointAddress; + u8 highspeed; + struct list_head td_list; /* queued itds/sitds */ + struct list_head free_list; /* list of unused itds/sitds */ + + /* output of (re)scheduling */ + struct ehci_per_sched ps; /* scheduling info */ + unsigned next_uframe; + __hc32 splits; + + /* the rest is derived from the endpoint descriptor, + * including the extra info for hw_bufp[0..2] + */ + u16 uperiod; /* period in uframes */ + u16 maxp; + unsigned bandwidth; + + /* This is used to initialize iTD's hw_bufp fields */ + __hc32 buf0; + __hc32 buf1; + __hc32 buf2; + + /* this is used to initialize sITD's tt info */ + __hc32 address; +}; + +/*-------------------------------------------------------------------------*/ + +/* + * EHCI Specification 0.95 Section 3.3 + * Fig 3-4 "Isochronous Transaction Descriptor (iTD)" + * + * Schedule records for high speed iso xfers + */ +struct ehci_itd { + /* first part defined by EHCI spec */ + __hc32 hw_next; /* see EHCI 3.3.1 */ + __hc32 hw_transaction[8]; /* see EHCI 3.3.2 */ +#define EHCI_ISOC_ACTIVE (1<<31) /* activate transfer this slot */ +#define EHCI_ISOC_BUF_ERR (1<<30) /* Data buffer error */ +#define EHCI_ISOC_BABBLE (1<<29) /* babble detected */ +#define EHCI_ISOC_XACTERR (1<<28) /* XactErr - transaction error */ +#define EHCI_ITD_LENGTH(tok) (((tok)>>16) & 0x0fff) +#define EHCI_ITD_IOC (1 << 15) /* interrupt on complete */ + +#define ITD_ACTIVE(ehci) cpu_to_hc32(ehci, EHCI_ISOC_ACTIVE) + + __hc32 hw_bufp[7]; /* see EHCI 3.3.3 */ + __hc32 hw_bufp_hi[7]; /* Appendix B */ + + /* the rest is HCD-private */ + dma_addr_t itd_dma; /* for this itd */ + union ehci_shadow itd_next; /* ptr to periodic q entry */ + + struct urb *urb; + struct ehci_iso_stream *stream; /* endpoint's queue */ + struct list_head itd_list; /* list of stream's itds */ + + /* any/all hw_transactions here may be used by that urb */ + unsigned frame; /* where scheduled */ + unsigned pg; + unsigned index[8]; /* in urb->iso_frame_desc */ +} __aligned(32); + +/*-------------------------------------------------------------------------*/ + +/* + * EHCI Specification 0.95 Section 3.4 + * siTD, aka split-transaction isochronous Transfer Descriptor + * ... describe full speed iso xfers through TT in hubs + * see Figure 3-5 "Split-transaction Isochronous Transaction Descriptor (siTD) + */ +struct ehci_sitd { + /* first part defined by EHCI spec */ + __hc32 hw_next; +/* uses bit field macros above - see EHCI 0.95 Table 3-8 */ + __hc32 hw_fullspeed_ep; /* EHCI table 3-9 */ + __hc32 hw_uframe; /* EHCI table 3-10 */ + __hc32 hw_results; /* EHCI table 3-11 */ +#define SITD_IOC (1 << 31) /* interrupt on completion */ +#define SITD_PAGE (1 << 30) /* buffer 0/1 */ +#define SITD_LENGTH(x) (((x) >> 16) & 0x3ff) +#define SITD_STS_ACTIVE (1 << 7) /* HC may execute this */ +#define SITD_STS_ERR (1 << 6) /* error from TT */ +#define SITD_STS_DBE (1 << 5) /* data buffer error (in HC) */ +#define SITD_STS_BABBLE (1 << 4) /* device was babbling */ +#define SITD_STS_XACT (1 << 3) /* illegal IN response */ +#define SITD_STS_MMF (1 << 2) /* incomplete split transaction */ +#define SITD_STS_STS (1 << 1) /* split transaction state */ + +#define SITD_ACTIVE(ehci) cpu_to_hc32(ehci, SITD_STS_ACTIVE) + + __hc32 hw_buf[2]; /* EHCI table 3-12 */ + __hc32 hw_backpointer; /* EHCI table 3-13 */ + __hc32 hw_buf_hi[2]; /* Appendix B */ + + /* the rest is HCD-private */ + dma_addr_t sitd_dma; + union ehci_shadow sitd_next; /* ptr to periodic q entry */ + + struct urb *urb; + struct ehci_iso_stream *stream; /* endpoint's queue */ + struct list_head sitd_list; /* list of stream's sitds */ + unsigned frame; + unsigned index; +} __aligned(32); + +/*-------------------------------------------------------------------------*/ + +/* + * EHCI Specification 0.96 Section 3.7 + * Periodic Frame Span Traversal Node (FSTN) + * + * Manages split interrupt transactions (using TT) that span frame boundaries + * into uframes 0/1; see 4.12.2.2. In those uframes, a "save place" FSTN + * makes the HC jump (back) to a QH to scan for fs/ls QH completions until + * it hits a "restore" FSTN; then it returns to finish other uframe 0/1 work. + */ +struct ehci_fstn { + __hc32 hw_next; /* any periodic q entry */ + __hc32 hw_prev; /* qh or EHCI_LIST_END */ + + /* the rest is HCD-private */ + dma_addr_t fstn_dma; + union ehci_shadow fstn_next; /* ptr to periodic q entry */ +} __aligned(32); + +/*-------------------------------------------------------------------------*/ + +/* + * USB-2.0 Specification Sections 11.14 and 11.18 + * Scheduling and budgeting split transactions using TTs + * + * A hub can have a single TT for all its ports, or multiple TTs (one for each + * port). The bandwidth and budgeting information for the full/low-speed bus + * below each TT is self-contained and independent of the other TTs or the + * high-speed bus. + * + * "Bandwidth" refers to the number of microseconds on the FS/LS bus allocated + * to an interrupt or isochronous endpoint for each frame. "Budget" refers to + * the best-case estimate of the number of full-speed bytes allocated to an + * endpoint for each microframe within an allocated frame. + * + * Removal of an endpoint invalidates a TT's budget. Instead of trying to + * keep an up-to-date record, we recompute the budget when it is needed. + */ + +struct ehci_tt { + u16 bandwidth[EHCI_BANDWIDTH_FRAMES]; + + struct list_head tt_list; /* List of all ehci_tt's */ + struct list_head ps_list; /* Items using this TT */ + struct usb_tt *usb_tt; + int tt_port; /* TT port number */ +}; + +/*-------------------------------------------------------------------------*/ + +/* Prepare the PORTSC wakeup flags during controller suspend/resume */ + +#define ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup) \ + ehci_adjust_port_wakeup_flags(ehci, true, do_wakeup) + +#define ehci_prepare_ports_for_controller_resume(ehci) \ + ehci_adjust_port_wakeup_flags(ehci, false, false) + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_USB_EHCI_ROOT_HUB_TT + +/* + * Some EHCI controllers have a Transaction Translator built into the + * root hub. This is a non-standard feature. Each controller will need + * to add code to the following inline functions, and call them as + * needed (mostly in root hub code). + */ + +#define ehci_is_TDI(e) (ehci_to_hcd(e)->has_tt) + +/* Returns the speed of a device attached to a port on the root hub. */ +static inline unsigned int +ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc) +{ + if (ehci_is_TDI(ehci)) { + switch ((portsc >> (ehci->has_hostpc ? 25 : 26)) & 3) { + case 0: + return 0; + case 1: + return USB_PORT_STAT_LOW_SPEED; + case 2: + default: + return USB_PORT_STAT_HIGH_SPEED; + } + } + return USB_PORT_STAT_HIGH_SPEED; +} + +#else + +#define ehci_is_TDI(e) (0) + +#define ehci_port_speed(ehci, portsc) USB_PORT_STAT_HIGH_SPEED +#endif + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_PPC_83xx +/* Some Freescale processors have an erratum in which the TT + * port number in the queue head was 0..N-1 instead of 1..N. + */ +#define ehci_has_fsl_portno_bug(e) ((e)->has_fsl_port_bug) +#else +#define ehci_has_fsl_portno_bug(e) (0) +#endif + +#define PORTSC_FSL_PFSC 24 /* Port Force Full-Speed Connect */ + +#if defined(CONFIG_PPC_85xx) +/* Some Freescale processors have an erratum (USB A-005275) in which + * incoming packets get corrupted in HS mode + */ +#define ehci_has_fsl_hs_errata(e) ((e)->has_fsl_hs_errata) +#else +#define ehci_has_fsl_hs_errata(e) (0) +#endif + +/* + * Some Freescale/NXP processors have an erratum (USB A-005697) + * in which we need to wait for 10ms for bus to enter suspend mode + * after setting SUSP bit. + */ +#define ehci_has_fsl_susp_errata(e) ((e)->has_fsl_susp_errata) + +/* + * Some Freescale/NXP processors using ChipIdea IP have a bug in which + * disabling the port (PE is cleared) does not cause PEC to be asserted + * when frame babble is detected. + */ +#define ehci_has_ci_pec_bug(e, portsc) \ + ((e)->has_ci_pec_bug && ((e)->command & CMD_PSE) \ + && !(portsc & PORT_PEC) && !(portsc & PORT_PE)) + +/* + * While most USB host controllers implement their registers in + * little-endian format, a minority (celleb companion chip) implement + * them in big endian format. + * + * This attempts to support either format at compile time without a + * runtime penalty, or both formats with the additional overhead + * of checking a flag bit. + * + * ehci_big_endian_capbase is a special quirk for controllers that + * implement the HC capability registers as separate registers and not + * as fields of a 32-bit register. + */ + +#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO +#define ehci_big_endian_mmio(e) ((e)->big_endian_mmio) +#define ehci_big_endian_capbase(e) ((e)->big_endian_capbase) +#else +#define ehci_big_endian_mmio(e) 0 +#define ehci_big_endian_capbase(e) 0 +#endif + +/* + * Big-endian read/write functions are arch-specific. + * Other arches can be added if/when they're needed. + */ +#if defined(CONFIG_ARM) && defined(CONFIG_ARCH_IXP4XX) +#define readl_be(addr) __raw_readl((__force unsigned *)addr) +#define writel_be(val, addr) __raw_writel(val, (__force unsigned *)addr) +#endif + +static inline unsigned int ehci_readl(const struct ehci_hcd *ehci, + __u32 __iomem *regs) +{ +#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO + return ehci_big_endian_mmio(ehci) ? + readl_be(regs) : + readl(regs); +#else + return readl(regs); +#endif +} + +#ifdef CONFIG_SOC_IMX28 +static inline void imx28_ehci_writel(const unsigned int val, + volatile __u32 __iomem *addr) +{ + __asm__ ("swp %0, %0, [%1]" : : "r"(val), "r"(addr)); +} +#else +static inline void imx28_ehci_writel(const unsigned int val, + volatile __u32 __iomem *addr) +{ +} +#endif +static inline void ehci_writel(const struct ehci_hcd *ehci, + const unsigned int val, __u32 __iomem *regs) +{ +#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO + ehci_big_endian_mmio(ehci) ? + writel_be(val, regs) : + writel(val, regs); +#else + if (ehci->imx28_write_fix) + imx28_ehci_writel(val, regs); + else + writel(val, regs); +#endif +} + +/* + * On certain ppc-44x SoC there is a HW issue, that could only worked around with + * explicit suspend/operate of OHCI. This function hereby makes sense only on that arch. + * Other common bits are dependent on has_amcc_usb23 quirk flag. + */ +#ifdef CONFIG_44x +static inline void set_ohci_hcfs(struct ehci_hcd *ehci, int operational) +{ + u32 hc_control; + + hc_control = (readl_be(ehci->ohci_hcctrl_reg) & ~OHCI_CTRL_HCFS); + if (operational) + hc_control |= OHCI_USB_OPER; + else + hc_control |= OHCI_USB_SUSPEND; + + writel_be(hc_control, ehci->ohci_hcctrl_reg); + (void) readl_be(ehci->ohci_hcctrl_reg); +} +#else +static inline void set_ohci_hcfs(struct ehci_hcd *ehci, int operational) +{ } +#endif + +/*-------------------------------------------------------------------------*/ + +/* + * The AMCC 440EPx not only implements its EHCI registers in big-endian + * format, but also its DMA data structures (descriptors). + * + * EHCI controllers accessed through PCI work normally (little-endian + * everywhere), so we won't bother supporting a BE-only mode for now. + */ +#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_DESC +#define ehci_big_endian_desc(e) ((e)->big_endian_desc) + +/* cpu to ehci */ +static inline __hc32 cpu_to_hc32(const struct ehci_hcd *ehci, const u32 x) +{ + return ehci_big_endian_desc(ehci) + ? (__force __hc32)cpu_to_be32(x) + : (__force __hc32)cpu_to_le32(x); +} + +/* ehci to cpu */ +static inline u32 hc32_to_cpu(const struct ehci_hcd *ehci, const __hc32 x) +{ + return ehci_big_endian_desc(ehci) + ? be32_to_cpu((__force __be32)x) + : le32_to_cpu((__force __le32)x); +} + +static inline u32 hc32_to_cpup(const struct ehci_hcd *ehci, const __hc32 *x) +{ + return ehci_big_endian_desc(ehci) + ? be32_to_cpup((__force __be32 *)x) + : le32_to_cpup((__force __le32 *)x); +} + +#else + +/* cpu to ehci */ +static inline __hc32 cpu_to_hc32(const struct ehci_hcd *ehci, const u32 x) +{ + return cpu_to_le32(x); +} + +/* ehci to cpu */ +static inline u32 hc32_to_cpu(const struct ehci_hcd *ehci, const __hc32 x) +{ + return le32_to_cpu(x); +} + +static inline u32 hc32_to_cpup(const struct ehci_hcd *ehci, const __hc32 *x) +{ + return le32_to_cpup(x); +} + +#endif + +/*-------------------------------------------------------------------------*/ + +#define ehci_dbg(ehci, fmt, args...) \ + dev_dbg(ehci_to_hcd(ehci)->self.controller, fmt, ## args) +#define ehci_err(ehci, fmt, args...) \ + dev_err(ehci_to_hcd(ehci)->self.controller, fmt, ## args) +#define ehci_info(ehci, fmt, args...) \ + dev_info(ehci_to_hcd(ehci)->self.controller, fmt, ## args) +#define ehci_warn(ehci, fmt, args...) \ + dev_warn(ehci_to_hcd(ehci)->self.controller, fmt, ## args) + +/*-------------------------------------------------------------------------*/ + +/* Declarations of things exported for use by ehci platform drivers */ + +struct ehci_driver_overrides { + size_t extra_priv_size; + int (*reset)(struct usb_hcd *hcd); + int (*port_power)(struct usb_hcd *hcd, + int portnum, bool enable); +}; + +extern void ehci_init_driver(struct hc_driver *drv, + const struct ehci_driver_overrides *over); +extern int ehci_setup(struct usb_hcd *hcd); +extern int ehci_handshake(struct ehci_hcd *ehci, void __iomem *ptr, + u32 mask, u32 done, int usec); +extern int ehci_reset(struct ehci_hcd *ehci); + +extern int ehci_suspend(struct usb_hcd *hcd, bool do_wakeup); +extern int ehci_resume(struct usb_hcd *hcd, bool force_reset); +extern void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, + bool suspending, bool do_wakeup); + +extern int ehci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength); + +#endif /* __LINUX_EHCI_HCD_H */ |