summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/ohci-at91.c
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/usb/host/ohci-at91.c728
1 files changed, 728 insertions, 0 deletions
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
new file mode 100644
index 0000000000..f691cd98a5
--- /dev/null
+++ b/drivers/usb/host/ohci-at91.c
@@ -0,0 +1,728 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * Copyright (C) 2004 SAN People (Pty) Ltd.
+ * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
+ *
+ * AT91 Bus Glue
+ *
+ * Based on fragments of 2.4 driver by Rick Bronson.
+ * Based on ohci-omap.c
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/atmel.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <soc/at91/atmel-sfr.h>
+
+#include "ohci.h"
+
+#define valid_port(index) ((index) >= 0 && (index) < AT91_MAX_USBH_PORTS)
+#define at91_for_each_port(index) \
+ for ((index) = 0; (index) < AT91_MAX_USBH_PORTS; (index)++)
+
+/* interface, function and usb clocks; sometimes also an AHB clock */
+#define hcd_to_ohci_at91_priv(h) \
+ ((struct ohci_at91_priv *)hcd_to_ohci(h)->priv)
+
+#define AT91_MAX_USBH_PORTS 3
+struct at91_usbh_data {
+ struct gpio_desc *vbus_pin[AT91_MAX_USBH_PORTS];
+ struct gpio_desc *overcurrent_pin[AT91_MAX_USBH_PORTS];
+ u8 ports; /* number of ports on root hub */
+ u8 overcurrent_supported;
+ u8 overcurrent_status[AT91_MAX_USBH_PORTS];
+ u8 overcurrent_changed[AT91_MAX_USBH_PORTS];
+};
+
+struct ohci_at91_priv {
+ struct clk *iclk;
+ struct clk *fclk;
+ struct clk *hclk;
+ bool clocked;
+ bool wakeup; /* Saved wake-up state for resume */
+ struct regmap *sfr_regmap;
+ u32 suspend_smc_id;
+};
+/* interface and function clocks; sometimes also an AHB clock */
+
+#define DRIVER_DESC "OHCI Atmel driver"
+
+static struct hc_driver __read_mostly ohci_at91_hc_driver;
+
+static const struct ohci_driver_overrides ohci_at91_drv_overrides __initconst = {
+ .extra_priv_size = sizeof(struct ohci_at91_priv),
+};
+
+/*-------------------------------------------------------------------------*/
+
+static void at91_start_clock(struct ohci_at91_priv *ohci_at91)
+{
+ if (ohci_at91->clocked)
+ return;
+
+ clk_set_rate(ohci_at91->fclk, 48000000);
+ clk_prepare_enable(ohci_at91->hclk);
+ clk_prepare_enable(ohci_at91->iclk);
+ clk_prepare_enable(ohci_at91->fclk);
+ ohci_at91->clocked = true;
+}
+
+static void at91_stop_clock(struct ohci_at91_priv *ohci_at91)
+{
+ if (!ohci_at91->clocked)
+ return;
+
+ clk_disable_unprepare(ohci_at91->fclk);
+ clk_disable_unprepare(ohci_at91->iclk);
+ clk_disable_unprepare(ohci_at91->hclk);
+ ohci_at91->clocked = false;
+}
+
+static void at91_start_hc(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ struct ohci_regs __iomem *regs = hcd->regs;
+ struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
+
+ dev_dbg(&pdev->dev, "start\n");
+
+ /*
+ * Start the USB clocks.
+ */
+ at91_start_clock(ohci_at91);
+
+ /*
+ * The USB host controller must remain in reset.
+ */
+ writel(0, &regs->control);
+}
+
+static void at91_stop_hc(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
+
+ dev_dbg(&pdev->dev, "stop\n");
+
+ /*
+ * Put the USB host controller into reset.
+ */
+ usb_hcd_platform_shutdown(pdev);
+
+ /*
+ * Stop the USB clocks.
+ */
+ at91_stop_clock(ohci_at91);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static void usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
+
+static u32 at91_dt_suspend_smc(struct device *dev)
+{
+ u32 suspend_smc_id;
+
+ if (!dev->of_node)
+ return 0;
+
+ if (of_property_read_u32(dev->of_node, "microchip,suspend-smc-id", &suspend_smc_id))
+ return 0;
+
+ return suspend_smc_id;
+}
+
+static struct regmap *at91_dt_syscon_sfr(void)
+{
+ struct regmap *regmap;
+
+ regmap = syscon_regmap_lookup_by_compatible("atmel,sama5d2-sfr");
+ if (IS_ERR(regmap)) {
+ regmap = syscon_regmap_lookup_by_compatible("microchip,sam9x60-sfr");
+ if (IS_ERR(regmap))
+ regmap = NULL;
+ }
+
+ return regmap;
+}
+
+/* configure so an HC device and id are always provided */
+/* always called with process context; sleeping is OK */
+
+
+/*
+ * usb_hcd_at91_probe - initialize AT91-based HCDs
+ * @driver: Pointer to hc driver instance
+ * @pdev: USB controller to probe
+ *
+ * Context: task context, might sleep
+ *
+ * Allocates basic resources for this USB host controller, and
+ * then invokes the start() method for the HCD associated with it
+ * through the hotplug entry's driver_data.
+ */
+static int usb_hcd_at91_probe(const struct hc_driver *driver,
+ struct platform_device *pdev)
+{
+ struct at91_usbh_data *board;
+ struct ohci_hcd *ohci;
+ int retval;
+ struct usb_hcd *hcd;
+ struct ohci_at91_priv *ohci_at91;
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ int irq;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ hcd = usb_create_hcd(driver, dev, "at91");
+ if (!hcd)
+ return -ENOMEM;
+ ohci_at91 = hcd_to_ohci_at91_priv(hcd);
+
+ hcd->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+ if (IS_ERR(hcd->regs)) {
+ retval = PTR_ERR(hcd->regs);
+ goto err;
+ }
+ hcd->rsrc_start = res->start;
+ hcd->rsrc_len = resource_size(res);
+
+ ohci_at91->iclk = devm_clk_get(dev, "ohci_clk");
+ if (IS_ERR(ohci_at91->iclk)) {
+ dev_err(dev, "failed to get ohci_clk\n");
+ retval = PTR_ERR(ohci_at91->iclk);
+ goto err;
+ }
+ ohci_at91->fclk = devm_clk_get(dev, "uhpck");
+ if (IS_ERR(ohci_at91->fclk)) {
+ dev_err(dev, "failed to get uhpck\n");
+ retval = PTR_ERR(ohci_at91->fclk);
+ goto err;
+ }
+ ohci_at91->hclk = devm_clk_get(dev, "hclk");
+ if (IS_ERR(ohci_at91->hclk)) {
+ dev_err(dev, "failed to get hclk\n");
+ retval = PTR_ERR(ohci_at91->hclk);
+ goto err;
+ }
+
+ ohci_at91->suspend_smc_id = at91_dt_suspend_smc(dev);
+ if (!ohci_at91->suspend_smc_id) {
+ dev_dbg(dev, "failed to find sfr suspend smc id, using regmap\n");
+ ohci_at91->sfr_regmap = at91_dt_syscon_sfr();
+ if (!ohci_at91->sfr_regmap)
+ dev_dbg(dev, "failed to find sfr node\n");
+ }
+
+ board = hcd->self.controller->platform_data;
+ ohci = hcd_to_ohci(hcd);
+ ohci->num_ports = board->ports;
+ at91_start_hc(pdev);
+
+ /*
+ * The RemoteWakeupConnected bit has to be set explicitly
+ * before calling ohci_run. The reset value of this bit is 0.
+ */
+ ohci->hc_control = OHCI_CTRL_RWC;
+
+ retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ if (retval == 0) {
+ device_wakeup_enable(hcd->self.controller);
+ return retval;
+ }
+
+ /* Error handling */
+ at91_stop_hc(pdev);
+
+ err:
+ usb_put_hcd(hcd);
+ return retval;
+}
+
+
+/* may be called with controller, bus, and devices active */
+
+/*
+ * usb_hcd_at91_remove - shutdown processing for AT91-based HCDs
+ * @hcd: USB controller to remove
+ * @pdev: Platform device required for cleanup
+ *
+ * Context: task context, might sleep
+ *
+ * Reverses the effect of usb_hcd_at91_probe(), first invoking
+ * the HCD's stop() method. It is always called from a thread
+ * context, "rmmod" or something similar.
+ */
+static void usb_hcd_at91_remove(struct usb_hcd *hcd,
+ struct platform_device *pdev)
+{
+ usb_remove_hcd(hcd);
+ at91_stop_hc(pdev);
+ usb_put_hcd(hcd);
+}
+
+/*-------------------------------------------------------------------------*/
+static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int enable)
+{
+ if (!valid_port(port))
+ return;
+
+ gpiod_set_value(pdata->vbus_pin[port], enable);
+}
+
+static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
+{
+ if (!valid_port(port))
+ return -EINVAL;
+
+ return gpiod_get_value(pdata->vbus_pin[port]);
+}
+
+/*
+ * Update the status data from the hub with the over-current indicator change.
+ */
+static int ohci_at91_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+ struct at91_usbh_data *pdata = hcd->self.controller->platform_data;
+ int length = ohci_hub_status_data(hcd, buf);
+ int port;
+
+ at91_for_each_port(port) {
+ if (pdata->overcurrent_changed[port]) {
+ if (!length)
+ length = 1;
+ buf[0] |= 1 << (port + 1);
+ }
+ }
+
+ return length;
+}
+
+static int ohci_at91_port_suspend(struct ohci_at91_priv *ohci_at91, u8 set)
+{
+ struct regmap *regmap = ohci_at91->sfr_regmap;
+ u32 regval;
+ int ret;
+
+ if (ohci_at91->suspend_smc_id) {
+ struct arm_smccc_res res;
+
+ arm_smccc_smc(ohci_at91->suspend_smc_id, set, 0, 0, 0, 0, 0, 0, &res);
+ if (res.a0)
+ return -EINVAL;
+ } else if (regmap) {
+ ret = regmap_read(regmap, AT91_SFR_OHCIICR, &regval);
+ if (ret)
+ return ret;
+
+ if (set)
+ regval |= AT91_OHCIICR_USB_SUSPEND;
+ else
+ regval &= ~AT91_OHCIICR_USB_SUSPEND;
+
+ regmap_write(regmap, AT91_SFR_OHCIICR, regval);
+ }
+
+ return 0;
+}
+
+/*
+ * Look at the control requests to the root hub and see if we need to override.
+ */
+static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+ u16 wIndex, char *buf, u16 wLength)
+{
+ struct at91_usbh_data *pdata = dev_get_platdata(hcd->self.controller);
+ struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
+ struct usb_hub_descriptor *desc;
+ int ret = -EINVAL;
+ u32 *data = (u32 *)buf;
+
+ dev_dbg(hcd->self.controller,
+ "ohci_at91_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n",
+ hcd, typeReq, wValue, wIndex, buf, wLength);
+
+ wIndex--;
+
+ switch (typeReq) {
+ case SetPortFeature:
+ switch (wValue) {
+ case USB_PORT_FEAT_POWER:
+ dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n");
+ if (valid_port(wIndex)) {
+ ohci_at91_usb_set_power(pdata, wIndex, 1);
+ ret = 0;
+ }
+
+ goto out;
+
+ case USB_PORT_FEAT_SUSPEND:
+ dev_dbg(hcd->self.controller, "SetPortFeat: SUSPEND\n");
+ if (valid_port(wIndex)) {
+ ohci_at91_port_suspend(ohci_at91, 1);
+ return 0;
+ }
+ break;
+ }
+ break;
+
+ case ClearPortFeature:
+ switch (wValue) {
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ dev_dbg(hcd->self.controller,
+ "ClearPortFeature: C_OVER_CURRENT\n");
+
+ if (valid_port(wIndex)) {
+ pdata->overcurrent_changed[wIndex] = 0;
+ pdata->overcurrent_status[wIndex] = 0;
+ }
+
+ goto out;
+
+ case USB_PORT_FEAT_OVER_CURRENT:
+ dev_dbg(hcd->self.controller,
+ "ClearPortFeature: OVER_CURRENT\n");
+
+ if (valid_port(wIndex))
+ pdata->overcurrent_status[wIndex] = 0;
+
+ goto out;
+
+ case USB_PORT_FEAT_POWER:
+ dev_dbg(hcd->self.controller,
+ "ClearPortFeature: POWER\n");
+
+ if (valid_port(wIndex)) {
+ ohci_at91_usb_set_power(pdata, wIndex, 0);
+ return 0;
+ }
+ break;
+
+ case USB_PORT_FEAT_SUSPEND:
+ dev_dbg(hcd->self.controller, "ClearPortFeature: SUSPEND\n");
+ if (valid_port(wIndex)) {
+ ohci_at91_port_suspend(ohci_at91, 0);
+ return 0;
+ }
+ break;
+ }
+ break;
+ }
+
+ ret = ohci_hub_control(hcd, typeReq, wValue, wIndex + 1, buf, wLength);
+ if (ret)
+ goto out;
+
+ switch (typeReq) {
+ case GetHubDescriptor:
+
+ /* update the hub's descriptor */
+
+ desc = (struct usb_hub_descriptor *)buf;
+
+ dev_dbg(hcd->self.controller, "wHubCharacteristics 0x%04x\n",
+ desc->wHubCharacteristics);
+
+ /* remove the old configurations for power-switching, and
+ * over-current protection, and insert our new configuration
+ */
+
+ desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM);
+ desc->wHubCharacteristics |=
+ cpu_to_le16(HUB_CHAR_INDV_PORT_LPSM);
+
+ if (pdata->overcurrent_supported) {
+ desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_OCPM);
+ desc->wHubCharacteristics |=
+ cpu_to_le16(HUB_CHAR_INDV_PORT_OCPM);
+ }
+
+ dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n",
+ desc->wHubCharacteristics);
+
+ return ret;
+
+ case GetPortStatus:
+ /* check port status */
+
+ dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex);
+
+ if (valid_port(wIndex)) {
+ if (!ohci_at91_usb_get_power(pdata, wIndex))
+ *data &= ~cpu_to_le32(RH_PS_PPS);
+
+ if (pdata->overcurrent_changed[wIndex])
+ *data |= cpu_to_le32(RH_PS_OCIC);
+
+ if (pdata->overcurrent_status[wIndex])
+ *data |= cpu_to_le32(RH_PS_POCI);
+ }
+ }
+
+ out:
+ return ret;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)
+{
+ struct platform_device *pdev = data;
+ struct at91_usbh_data *pdata = dev_get_platdata(&pdev->dev);
+ int val, port;
+
+ /* From the GPIO notifying the over-current situation, find
+ * out the corresponding port */
+ at91_for_each_port(port) {
+ if (gpiod_to_irq(pdata->overcurrent_pin[port]) == irq)
+ break;
+ }
+
+ if (port == AT91_MAX_USBH_PORTS) {
+ dev_err(& pdev->dev, "overcurrent interrupt from unknown GPIO\n");
+ return IRQ_HANDLED;
+ }
+
+ val = gpiod_get_value(pdata->overcurrent_pin[port]);
+
+ /* When notified of an over-current situation, disable power
+ on the corresponding port, and mark this port in
+ over-current. */
+ if (!val) {
+ ohci_at91_usb_set_power(pdata, port, 0);
+ pdata->overcurrent_status[port] = 1;
+ pdata->overcurrent_changed[port] = 1;
+ }
+
+ dev_dbg(& pdev->dev, "overcurrent situation %s\n",
+ val ? "exited" : "notified");
+
+ return IRQ_HANDLED;
+}
+
+static const struct of_device_id at91_ohci_dt_ids[] = {
+ { .compatible = "atmel,at91rm9200-ohci" },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, at91_ohci_dt_ids);
+
+/*-------------------------------------------------------------------------*/
+
+static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct at91_usbh_data *pdata;
+ int i;
+ int ret;
+ int err;
+ u32 ports;
+
+ /* Right now device-tree probed devices don't get dma_mask set.
+ * Since shared usb code relies on it, set it here for now.
+ * Once we have dma capability bindings this can go away.
+ */
+ ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+ if (ret)
+ return ret;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ pdev->dev.platform_data = pdata;
+
+ if (!of_property_read_u32(np, "num-ports", &ports))
+ pdata->ports = ports;
+
+ at91_for_each_port(i) {
+ if (i >= pdata->ports)
+ break;
+
+ pdata->vbus_pin[i] =
+ devm_gpiod_get_index_optional(&pdev->dev, "atmel,vbus",
+ i, GPIOD_OUT_HIGH);
+ if (IS_ERR(pdata->vbus_pin[i])) {
+ err = PTR_ERR(pdata->vbus_pin[i]);
+ dev_err(&pdev->dev, "unable to claim gpio \"vbus\": %d\n", err);
+ continue;
+ }
+ }
+
+ at91_for_each_port(i) {
+ if (i >= pdata->ports)
+ break;
+
+ pdata->overcurrent_pin[i] =
+ devm_gpiod_get_index_optional(&pdev->dev, "atmel,oc",
+ i, GPIOD_IN);
+ if (!pdata->overcurrent_pin[i])
+ continue;
+ if (IS_ERR(pdata->overcurrent_pin[i])) {
+ err = PTR_ERR(pdata->overcurrent_pin[i]);
+ dev_err(&pdev->dev, "unable to claim gpio \"overcurrent\": %d\n", err);
+ continue;
+ }
+
+ ret = devm_request_irq(&pdev->dev,
+ gpiod_to_irq(pdata->overcurrent_pin[i]),
+ ohci_hcd_at91_overcurrent_irq,
+ IRQF_SHARED,
+ "ohci_overcurrent", pdev);
+ if (ret)
+ dev_info(&pdev->dev, "failed to request gpio \"overcurrent\" IRQ\n");
+ }
+
+ device_init_wakeup(&pdev->dev, 1);
+ return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev);
+}
+
+static void ohci_hcd_at91_drv_remove(struct platform_device *pdev)
+{
+ struct at91_usbh_data *pdata = dev_get_platdata(&pdev->dev);
+ int i;
+
+ if (pdata) {
+ at91_for_each_port(i)
+ ohci_at91_usb_set_power(pdata, i, 0);
+ }
+
+ device_init_wakeup(&pdev->dev, 0);
+ usb_hcd_at91_remove(platform_get_drvdata(pdev), pdev);
+}
+
+static int __maybe_unused
+ohci_hcd_at91_drv_suspend(struct device *dev)
+{
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
+ int ret;
+
+ /*
+ * Disable wakeup if we are going to sleep with slow clock mode
+ * enabled.
+ */
+ ohci_at91->wakeup = device_may_wakeup(dev)
+ && !at91_suspend_entering_slow_clock();
+
+ if (ohci_at91->wakeup)
+ enable_irq_wake(hcd->irq);
+
+ ret = ohci_suspend(hcd, ohci_at91->wakeup);
+ if (ret) {
+ if (ohci_at91->wakeup)
+ disable_irq_wake(hcd->irq);
+ return ret;
+ }
+ /*
+ * The integrated transceivers seem unable to notice disconnect,
+ * reconnect, or wakeup without the 48 MHz clock active. so for
+ * correctness, always discard connection state (using reset).
+ *
+ * REVISIT: some boards will be able to turn VBUS off...
+ */
+ if (!ohci_at91->wakeup) {
+ ohci->rh_state = OHCI_RH_HALTED;
+
+ /* flush the writes */
+ (void) ohci_readl (ohci, &ohci->regs->control);
+ msleep(1);
+ ohci_at91_port_suspend(ohci_at91, 1);
+ at91_stop_clock(ohci_at91);
+ } else {
+ ohci_at91_port_suspend(ohci_at91, 1);
+ }
+
+ return ret;
+}
+
+static int __maybe_unused
+ohci_hcd_at91_drv_resume(struct device *dev)
+{
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd);
+
+ ohci_at91_port_suspend(ohci_at91, 0);
+
+ if (ohci_at91->wakeup)
+ disable_irq_wake(hcd->irq);
+ else
+ at91_start_clock(ohci_at91);
+
+ /*
+ * According to the comment in ohci_hcd_at91_drv_suspend()
+ * we need to do a reset if the 48Mhz clock was stopped,
+ * that is, if ohci_at91->wakeup is clear. Tell ohci_resume()
+ * to reset in this case by setting its "hibernated" flag.
+ */
+ ohci_resume(hcd, !ohci_at91->wakeup);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ohci_hcd_at91_pm_ops, ohci_hcd_at91_drv_suspend,
+ ohci_hcd_at91_drv_resume);
+
+static struct platform_driver ohci_hcd_at91_driver = {
+ .probe = ohci_hcd_at91_drv_probe,
+ .remove_new = ohci_hcd_at91_drv_remove,
+ .shutdown = usb_hcd_platform_shutdown,
+ .driver = {
+ .name = "at91_ohci",
+ .pm = &ohci_hcd_at91_pm_ops,
+ .of_match_table = at91_ohci_dt_ids,
+ },
+};
+
+static int __init ohci_at91_init(void)
+{
+ if (usb_disabled())
+ return -ENODEV;
+
+ ohci_init_driver(&ohci_at91_hc_driver, &ohci_at91_drv_overrides);
+
+ /*
+ * The Atmel HW has some unusual quirks, which require Atmel-specific
+ * workarounds. We override certain hc_driver functions here to
+ * achieve that. We explicitly do not enhance ohci_driver_overrides to
+ * allow this more easily, since this is an unusual case, and we don't
+ * want to encourage others to override these functions by making it
+ * too easy.
+ */
+
+ ohci_at91_hc_driver.hub_status_data = ohci_at91_hub_status_data;
+ ohci_at91_hc_driver.hub_control = ohci_at91_hub_control;
+
+ return platform_driver_register(&ohci_hcd_at91_driver);
+}
+module_init(ohci_at91_init);
+
+static void __exit ohci_at91_cleanup(void)
+{
+ platform_driver_unregister(&ohci_hcd_at91_driver);
+}
+module_exit(ohci_at91_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:at91_ohci");
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 17:55:26 +0000