diff options
Diffstat (limited to 'drivers/usb/serial/iuu_phoenix.c')
| -rw-r--r-- | drivers/usb/serial/iuu_phoenix.c | 1208 |
1 files changed, 1208 insertions, 0 deletions
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c new file mode 100644 index 0000000000..77cba71bcc --- /dev/null +++ b/drivers/usb/serial/iuu_phoenix.c @@ -0,0 +1,1208 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Infinity Unlimited USB Phoenix driver + * + * Copyright (C) 2010 James Courtier-Dutton (James@superbug.co.uk) + + * Copyright (C) 2007 Alain Degreffe (eczema@ecze.com) + * + * Original code taken from iuutool (Copyright (C) 2006 Juan Carlos Borrás) + * + * And tested with help of WB Electronics + */ +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/serial.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/spinlock.h> +#include <linux/uaccess.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include "iuu_phoenix.h" +#include <linux/random.h> + +#define DRIVER_DESC "Infinity USB Unlimited Phoenix driver" + +static const struct usb_device_id id_table[] = { + {USB_DEVICE(IUU_USB_VENDOR_ID, IUU_USB_PRODUCT_ID)}, + {} /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, id_table); + +/* turbo parameter */ +static int boost = 100; +static int clockmode = 1; +static int cdmode = 1; +static int iuu_cardin; +static int iuu_cardout; +static bool xmas; +static int vcc_default = 5; + +static int iuu_create_sysfs_attrs(struct usb_serial_port *port); +static int iuu_remove_sysfs_attrs(struct usb_serial_port *port); +static void read_rxcmd_callback(struct urb *urb); + +struct iuu_private { + spinlock_t lock; /* store irq state */ + u8 line_status; + int tiostatus; /* store IUART SIGNAL for tiocmget call */ + u8 reset; /* if 1 reset is needed */ + int poll; /* number of poll */ + u8 *writebuf; /* buffer for writing to device */ + int writelen; /* num of byte to write to device */ + u8 *buf; /* used for initialize speed */ + u8 len; + int vcc; /* vcc (either 3 or 5 V) */ + u32 boost; + u32 clk; +}; + +static int iuu_port_probe(struct usb_serial_port *port) +{ + struct iuu_private *priv; + int ret; + + priv = kzalloc(sizeof(struct iuu_private), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->buf = kzalloc(256, GFP_KERNEL); + if (!priv->buf) { + kfree(priv); + return -ENOMEM; + } + + priv->writebuf = kzalloc(256, GFP_KERNEL); + if (!priv->writebuf) { + kfree(priv->buf); + kfree(priv); + return -ENOMEM; + } + + priv->vcc = vcc_default; + spin_lock_init(&priv->lock); + + usb_set_serial_port_data(port, priv); + + ret = iuu_create_sysfs_attrs(port); + if (ret) { + kfree(priv->writebuf); + kfree(priv->buf); + kfree(priv); + return ret; + } + + return 0; +} + +static void iuu_port_remove(struct usb_serial_port *port) +{ + struct iuu_private *priv = usb_get_serial_port_data(port); + + iuu_remove_sysfs_attrs(port); + kfree(priv->writebuf); + kfree(priv->buf); + kfree(priv); +} + +static int iuu_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct iuu_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + /* FIXME: locking on tiomstatus */ + dev_dbg(&port->dev, "%s msg : SET = 0x%04x, CLEAR = 0x%04x\n", + __func__, set, clear); + + spin_lock_irqsave(&priv->lock, flags); + + if ((set & TIOCM_RTS) && !(priv->tiostatus == TIOCM_RTS)) { + dev_dbg(&port->dev, "%s TIOCMSET RESET called !!!\n", __func__); + priv->reset = 1; + } + if (set & TIOCM_RTS) + priv->tiostatus = TIOCM_RTS; + + spin_unlock_irqrestore(&priv->lock, flags); + return 0; +} + +/* This is used to provide a carrier detect mechanism + * When a card is present, the response is 0x00 + * When no card , the reader respond with TIOCM_CD + * This is known as CD autodetect mechanism + */ +static int iuu_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct iuu_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + int rc; + + spin_lock_irqsave(&priv->lock, flags); + rc = priv->tiostatus; + spin_unlock_irqrestore(&priv->lock, flags); + + return rc; +} + +static void iuu_rxcmd(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + int status = urb->status; + + if (status) { + dev_dbg(&port->dev, "%s - status = %d\n", __func__, status); + /* error stop all */ + return; + } + + + memset(port->write_urb->transfer_buffer, IUU_UART_RX, 1); + usb_fill_bulk_urb(port->write_urb, port->serial->dev, + usb_sndbulkpipe(port->serial->dev, + port->bulk_out_endpointAddress), + port->write_urb->transfer_buffer, 1, + read_rxcmd_callback, port); + usb_submit_urb(port->write_urb, GFP_ATOMIC); +} + +static int iuu_reset(struct usb_serial_port *port, u8 wt) +{ + struct iuu_private *priv = usb_get_serial_port_data(port); + int result; + char *buf_ptr = port->write_urb->transfer_buffer; + + /* Prepare the reset sequence */ + + *buf_ptr++ = IUU_RST_SET; + *buf_ptr++ = IUU_DELAY_MS; + *buf_ptr++ = wt; + *buf_ptr = IUU_RST_CLEAR; + + /* send the sequence */ + + usb_fill_bulk_urb(port->write_urb, + port->serial->dev, + usb_sndbulkpipe(port->serial->dev, + port->bulk_out_endpointAddress), + port->write_urb->transfer_buffer, 4, iuu_rxcmd, port); + result = usb_submit_urb(port->write_urb, GFP_ATOMIC); + priv->reset = 0; + return result; +} + +/* Status Function + * Return value is + * 0x00 = no card + * 0x01 = smartcard + * 0x02 = sim card + */ +static void iuu_update_status_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct iuu_private *priv = usb_get_serial_port_data(port); + u8 *st; + int status = urb->status; + + if (status) { + dev_dbg(&port->dev, "%s - status = %d\n", __func__, status); + /* error stop all */ + return; + } + + st = urb->transfer_buffer; + dev_dbg(&port->dev, "%s - enter\n", __func__); + if (urb->actual_length == 1) { + switch (st[0]) { + case 0x1: + priv->tiostatus = iuu_cardout; + break; + case 0x0: + priv->tiostatus = iuu_cardin; + break; + default: + priv->tiostatus = iuu_cardin; + } + } + iuu_rxcmd(urb); +} + +static void iuu_status_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + int status = urb->status; + + dev_dbg(&port->dev, "%s - status = %d\n", __func__, status); + usb_fill_bulk_urb(port->read_urb, port->serial->dev, + usb_rcvbulkpipe(port->serial->dev, + port->bulk_in_endpointAddress), + port->read_urb->transfer_buffer, 256, + iuu_update_status_callback, port); + usb_submit_urb(port->read_urb, GFP_ATOMIC); +} + +static int iuu_status(struct usb_serial_port *port) +{ + int result; + + memset(port->write_urb->transfer_buffer, IUU_GET_STATE_REGISTER, 1); + usb_fill_bulk_urb(port->write_urb, port->serial->dev, + usb_sndbulkpipe(port->serial->dev, + port->bulk_out_endpointAddress), + port->write_urb->transfer_buffer, 1, + iuu_status_callback, port); + result = usb_submit_urb(port->write_urb, GFP_ATOMIC); + return result; + +} + +static int bulk_immediate(struct usb_serial_port *port, u8 *buf, u8 count) +{ + int status; + struct usb_serial *serial = port->serial; + int actual = 0; + + /* send the data out the bulk port */ + + status = + usb_bulk_msg(serial->dev, + usb_sndbulkpipe(serial->dev, + port->bulk_out_endpointAddress), buf, + count, &actual, 1000); + + if (status != IUU_OPERATION_OK) + dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status); + else + dev_dbg(&port->dev, "%s - write OK !\n", __func__); + return status; +} + +static int read_immediate(struct usb_serial_port *port, u8 *buf, u8 count) +{ + int status; + struct usb_serial *serial = port->serial; + int actual = 0; + + /* send the data out the bulk port */ + status = + usb_bulk_msg(serial->dev, + usb_rcvbulkpipe(serial->dev, + port->bulk_in_endpointAddress), buf, + count, &actual, 1000); + + if (status != IUU_OPERATION_OK) + dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status); + else + dev_dbg(&port->dev, "%s - read OK !\n", __func__); + return status; +} + +static int iuu_led(struct usb_serial_port *port, unsigned int R, + unsigned int G, unsigned int B, u8 f) +{ + int status; + u8 *buf; + buf = kmalloc(8, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + buf[0] = IUU_SET_LED; + buf[1] = R & 0xFF; + buf[2] = (R >> 8) & 0xFF; + buf[3] = G & 0xFF; + buf[4] = (G >> 8) & 0xFF; + buf[5] = B & 0xFF; + buf[6] = (B >> 8) & 0xFF; + buf[7] = f; + status = bulk_immediate(port, buf, 8); + kfree(buf); + if (status != IUU_OPERATION_OK) + dev_dbg(&port->dev, "%s - led error status = %2x\n", __func__, status); + else + dev_dbg(&port->dev, "%s - led OK !\n", __func__); + return IUU_OPERATION_OK; +} + +static void iuu_rgbf_fill_buffer(u8 *buf, u8 r1, u8 r2, u8 g1, u8 g2, u8 b1, + u8 b2, u8 freq) +{ + *buf++ = IUU_SET_LED; + *buf++ = r1; + *buf++ = r2; + *buf++ = g1; + *buf++ = g2; + *buf++ = b1; + *buf++ = b2; + *buf = freq; +} + +static void iuu_led_activity_on(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + char *buf_ptr = port->write_urb->transfer_buffer; + + if (xmas) { + buf_ptr[0] = IUU_SET_LED; + get_random_bytes(buf_ptr + 1, 6); + buf_ptr[7] = 1; + } else { + iuu_rgbf_fill_buffer(buf_ptr, 255, 255, 0, 0, 0, 0, 255); + } + + usb_fill_bulk_urb(port->write_urb, port->serial->dev, + usb_sndbulkpipe(port->serial->dev, + port->bulk_out_endpointAddress), + port->write_urb->transfer_buffer, 8 , + iuu_rxcmd, port); + usb_submit_urb(port->write_urb, GFP_ATOMIC); +} + +static void iuu_led_activity_off(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + char *buf_ptr = port->write_urb->transfer_buffer; + + if (xmas) { + iuu_rxcmd(urb); + return; + } + + iuu_rgbf_fill_buffer(buf_ptr, 0, 0, 255, 255, 0, 0, 255); + + usb_fill_bulk_urb(port->write_urb, port->serial->dev, + usb_sndbulkpipe(port->serial->dev, + port->bulk_out_endpointAddress), + port->write_urb->transfer_buffer, 8 , + iuu_rxcmd, port); + usb_submit_urb(port->write_urb, GFP_ATOMIC); +} + + + +static int iuu_clk(struct usb_serial_port *port, int dwFrq) +{ + int status; + struct iuu_private *priv = usb_get_serial_port_data(port); + int Count = 0; + u8 FrqGenAdr = 0x69; + u8 DIV = 0; /* 8bit */ + u8 XDRV = 0; /* 8bit */ + u8 PUMP = 0; /* 3bit */ + u8 PBmsb = 0; /* 2bit */ + u8 PBlsb = 0; /* 8bit */ + u8 PO = 0; /* 1bit */ + u8 Q = 0; /* 7bit */ + /* 24bit = 3bytes */ + unsigned int P = 0; + unsigned int P2 = 0; + int frq = (int)dwFrq; + + if (frq == 0) { + priv->buf[Count++] = IUU_UART_WRITE_I2C; + priv->buf[Count++] = FrqGenAdr << 1; + priv->buf[Count++] = 0x09; + priv->buf[Count++] = 0x00; + + status = bulk_immediate(port, (u8 *) priv->buf, Count); + if (status != 0) { + dev_dbg(&port->dev, "%s - write error\n", __func__); + return status; + } + } else if (frq == 3579000) { + DIV = 100; + P = 1193; + Q = 40; + XDRV = 0; + } else if (frq == 3680000) { + DIV = 105; + P = 161; + Q = 5; + XDRV = 0; + } else if (frq == 6000000) { + DIV = 66; + P = 66; + Q = 2; + XDRV = 0x28; + } else { + unsigned int result = 0; + unsigned int tmp = 0; + unsigned int check; + unsigned int check2; + char found = 0x00; + unsigned int lQ = 2; + unsigned int lP = 2055; + unsigned int lDiv = 4; + + for (lQ = 2; lQ <= 47 && !found; lQ++) + for (lP = 2055; lP >= 8 && !found; lP--) + for (lDiv = 4; lDiv <= 127 && !found; lDiv++) { + tmp = (12000000 / lDiv) * (lP / lQ); + if (abs((int)(tmp - frq)) < + abs((int)(frq - result))) { + check2 = (12000000 / lQ); + if (check2 < 250000) + continue; + check = (12000000 / lQ) * lP; + if (check > 400000000) + continue; + if (check < 100000000) + continue; + if (lDiv < 4 || lDiv > 127) + continue; + result = tmp; + P = lP; + DIV = lDiv; + Q = lQ; + if (result == frq) + found = 0x01; + } + } + } + P2 = ((P - PO) / 2) - 4; + PUMP = 0x04; + PBmsb = (P2 >> 8 & 0x03); + PBlsb = P2 & 0xFF; + PO = (P >> 10) & 0x01; + Q = Q - 2; + + priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ + priv->buf[Count++] = FrqGenAdr << 1; + priv->buf[Count++] = 0x09; + priv->buf[Count++] = 0x20; /* Adr = 0x09 */ + priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ + priv->buf[Count++] = FrqGenAdr << 1; + priv->buf[Count++] = 0x0C; + priv->buf[Count++] = DIV; /* Adr = 0x0C */ + priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ + priv->buf[Count++] = FrqGenAdr << 1; + priv->buf[Count++] = 0x12; + priv->buf[Count++] = XDRV; /* Adr = 0x12 */ + priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ + priv->buf[Count++] = FrqGenAdr << 1; + priv->buf[Count++] = 0x13; + priv->buf[Count++] = 0x6B; /* Adr = 0x13 */ + priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ + priv->buf[Count++] = FrqGenAdr << 1; + priv->buf[Count++] = 0x40; + priv->buf[Count++] = (0xC0 | ((PUMP & 0x07) << 2)) | + (PBmsb & 0x03); /* Adr = 0x40 */ + priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ + priv->buf[Count++] = FrqGenAdr << 1; + priv->buf[Count++] = 0x41; + priv->buf[Count++] = PBlsb; /* Adr = 0x41 */ + priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ + priv->buf[Count++] = FrqGenAdr << 1; + priv->buf[Count++] = 0x42; + priv->buf[Count++] = Q | (((PO & 0x01) << 7)); /* Adr = 0x42 */ + priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ + priv->buf[Count++] = FrqGenAdr << 1; + priv->buf[Count++] = 0x44; + priv->buf[Count++] = (char)0xFF; /* Adr = 0x44 */ + priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ + priv->buf[Count++] = FrqGenAdr << 1; + priv->buf[Count++] = 0x45; + priv->buf[Count++] = (char)0xFE; /* Adr = 0x45 */ + priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ + priv->buf[Count++] = FrqGenAdr << 1; + priv->buf[Count++] = 0x46; + priv->buf[Count++] = 0x7F; /* Adr = 0x46 */ + priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ + priv->buf[Count++] = FrqGenAdr << 1; + priv->buf[Count++] = 0x47; + priv->buf[Count++] = (char)0x84; /* Adr = 0x47 */ + + status = bulk_immediate(port, (u8 *) priv->buf, Count); + if (status != IUU_OPERATION_OK) + dev_dbg(&port->dev, "%s - write error\n", __func__); + return status; +} + +static int iuu_uart_flush(struct usb_serial_port *port) +{ + struct device *dev = &port->dev; + int i; + int status; + u8 *rxcmd; + struct iuu_private *priv = usb_get_serial_port_data(port); + + if (iuu_led(port, 0xF000, 0, 0, 0xFF) < 0) + return -EIO; + + rxcmd = kmalloc(1, GFP_KERNEL); + if (!rxcmd) + return -ENOMEM; + + rxcmd[0] = IUU_UART_RX; + + for (i = 0; i < 2; i++) { + status = bulk_immediate(port, rxcmd, 1); + if (status != IUU_OPERATION_OK) { + dev_dbg(dev, "%s - uart_flush_write error\n", __func__); + goto out_free; + } + + status = read_immediate(port, &priv->len, 1); + if (status != IUU_OPERATION_OK) { + dev_dbg(dev, "%s - uart_flush_read error\n", __func__); + goto out_free; + } + + if (priv->len > 0) { + dev_dbg(dev, "%s - uart_flush datalen is : %i\n", __func__, priv->len); + status = read_immediate(port, priv->buf, priv->len); + if (status != IUU_OPERATION_OK) { + dev_dbg(dev, "%s - uart_flush_read error\n", __func__); + goto out_free; + } + } + } + dev_dbg(dev, "%s - uart_flush_read OK!\n", __func__); + iuu_led(port, 0, 0xF000, 0, 0xFF); + +out_free: + kfree(rxcmd); + + return status; +} + +static void read_buf_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + unsigned char *data = urb->transfer_buffer; + int status = urb->status; + + if (status) { + if (status == -EPROTO) { + /* reschedule needed */ + } + return; + } + + dev_dbg(&port->dev, "%s - %i chars to write\n", __func__, urb->actual_length); + + if (urb->actual_length) { + tty_insert_flip_string(&port->port, data, urb->actual_length); + tty_flip_buffer_push(&port->port); + } + iuu_led_activity_on(urb); +} + +static int iuu_bulk_write(struct usb_serial_port *port) +{ + struct iuu_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + int result; + int buf_len; + char *buf_ptr = port->write_urb->transfer_buffer; + + spin_lock_irqsave(&priv->lock, flags); + *buf_ptr++ = IUU_UART_ESC; + *buf_ptr++ = IUU_UART_TX; + *buf_ptr++ = priv->writelen; + + memcpy(buf_ptr, priv->writebuf, priv->writelen); + buf_len = priv->writelen; + priv->writelen = 0; + spin_unlock_irqrestore(&priv->lock, flags); + dev_dbg(&port->dev, "%s - writing %i chars : %*ph\n", __func__, + buf_len, buf_len, buf_ptr); + usb_fill_bulk_urb(port->write_urb, port->serial->dev, + usb_sndbulkpipe(port->serial->dev, + port->bulk_out_endpointAddress), + port->write_urb->transfer_buffer, buf_len + 3, + iuu_rxcmd, port); + result = usb_submit_urb(port->write_urb, GFP_ATOMIC); + usb_serial_port_softint(port); + return result; +} + +static int iuu_read_buf(struct usb_serial_port *port, int len) +{ + int result; + + usb_fill_bulk_urb(port->read_urb, port->serial->dev, + usb_rcvbulkpipe(port->serial->dev, + port->bulk_in_endpointAddress), + port->read_urb->transfer_buffer, len, + read_buf_callback, port); + result = usb_submit_urb(port->read_urb, GFP_ATOMIC); + return result; +} + +static void iuu_uart_read_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct iuu_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + int status = urb->status; + int len = 0; + unsigned char *data = urb->transfer_buffer; + priv->poll++; + + if (status) { + dev_dbg(&port->dev, "%s - status = %d\n", __func__, status); + /* error stop all */ + return; + } + + if (urb->actual_length == 1) + len = (int) data[0]; + + if (urb->actual_length > 1) { + dev_dbg(&port->dev, "%s - urb->actual_length = %i\n", __func__, + urb->actual_length); + return; + } + /* if len > 0 call readbuf */ + + if (len > 0) { + dev_dbg(&port->dev, "%s - call read buf - len to read is %i\n", + __func__, len); + status = iuu_read_buf(port, len); + return; + } + /* need to update status ? */ + if (priv->poll > 99) { + status = iuu_status(port); + priv->poll = 0; + return; + } + + /* reset waiting ? */ + + if (priv->reset == 1) { + status = iuu_reset(port, 0xC); + return; + } + /* Writebuf is waiting */ + spin_lock_irqsave(&priv->lock, flags); + if (priv->writelen > 0) { + spin_unlock_irqrestore(&priv->lock, flags); + status = iuu_bulk_write(port); + return; + } + spin_unlock_irqrestore(&priv->lock, flags); + /* if nothing to write call again rxcmd */ + dev_dbg(&port->dev, "%s - rxcmd recall\n", __func__); + iuu_led_activity_off(urb); +} + +static int iuu_uart_write(struct tty_struct *tty, struct usb_serial_port *port, + const u8 *buf, int count) +{ + struct iuu_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + + count = min(count, 256 - priv->writelen); + if (count == 0) + goto out; + + /* fill the buffer */ + memcpy(priv->writebuf + priv->writelen, buf, count); + priv->writelen += count; +out: + spin_unlock_irqrestore(&priv->lock, flags); + + return count; +} + +static void read_rxcmd_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + int result; + int status = urb->status; + + if (status) { + /* error stop all */ + return; + } + + usb_fill_bulk_urb(port->read_urb, port->serial->dev, + usb_rcvbulkpipe(port->serial->dev, + port->bulk_in_endpointAddress), + port->read_urb->transfer_buffer, 256, + iuu_uart_read_callback, port); + result = usb_submit_urb(port->read_urb, GFP_ATOMIC); + dev_dbg(&port->dev, "%s - submit result = %d\n", __func__, result); +} + +static int iuu_uart_on(struct usb_serial_port *port) +{ + int status; + u8 *buf; + + buf = kmalloc(4, GFP_KERNEL); + + if (!buf) + return -ENOMEM; + + buf[0] = IUU_UART_ENABLE; + buf[1] = (u8) ((IUU_BAUD_9600 >> 8) & 0x00FF); + buf[2] = (u8) (0x00FF & IUU_BAUD_9600); + buf[3] = (u8) (0x0F0 & IUU_ONE_STOP_BIT) | (0x07 & IUU_PARITY_EVEN); + + status = bulk_immediate(port, buf, 4); + if (status != IUU_OPERATION_OK) { + dev_dbg(&port->dev, "%s - uart_on error\n", __func__); + goto uart_enable_failed; + } + /* iuu_reset() the card after iuu_uart_on() */ + status = iuu_uart_flush(port); + if (status != IUU_OPERATION_OK) + dev_dbg(&port->dev, "%s - uart_flush error\n", __func__); +uart_enable_failed: + kfree(buf); + return status; +} + +/* Disables the IUU UART (a.k.a. the Phoenix voiderface) */ +static int iuu_uart_off(struct usb_serial_port *port) +{ + int status; + u8 *buf; + buf = kmalloc(1, GFP_KERNEL); + if (!buf) + return -ENOMEM; + buf[0] = IUU_UART_DISABLE; + + status = bulk_immediate(port, buf, 1); + if (status != IUU_OPERATION_OK) + dev_dbg(&port->dev, "%s - uart_off error\n", __func__); + + kfree(buf); + return status; +} + +static int iuu_uart_baud(struct usb_serial_port *port, u32 baud_base, + u32 *actual, u8 parity) +{ + int status; + u32 baud; + u8 *dataout; + u8 DataCount = 0; + u8 T1Frekvens = 0; + u8 T1reload = 0; + unsigned int T1FrekvensHZ = 0; + + dev_dbg(&port->dev, "%s - enter baud_base=%d\n", __func__, baud_base); + dataout = kmalloc(5, GFP_KERNEL); + + if (!dataout) + return -ENOMEM; + /*baud = (((priv->clk / 35) * baud_base) / 100000); */ + baud = baud_base; + + if (baud < 1200 || baud > 230400) { + kfree(dataout); + return IUU_INVALID_PARAMETER; + } + if (baud > 977) { + T1Frekvens = 3; + T1FrekvensHZ = 500000; + } + + if (baud > 3906) { + T1Frekvens = 2; + T1FrekvensHZ = 2000000; + } + + if (baud > 11718) { + T1Frekvens = 1; + T1FrekvensHZ = 6000000; + } + + if (baud > 46875) { + T1Frekvens = 0; + T1FrekvensHZ = 24000000; + } + + T1reload = 256 - (u8) (T1FrekvensHZ / (baud * 2)); + + /* magic number here: ENTER_FIRMWARE_UPDATE; */ + dataout[DataCount++] = IUU_UART_ESC; + /* magic number here: CHANGE_BAUD; */ + dataout[DataCount++] = IUU_UART_CHANGE; + dataout[DataCount++] = T1Frekvens; + dataout[DataCount++] = T1reload; + + *actual = (T1FrekvensHZ / (256 - T1reload)) / 2; + + switch (parity & 0x0F) { + case IUU_PARITY_NONE: + dataout[DataCount++] = 0x00; + break; + case IUU_PARITY_EVEN: + dataout[DataCount++] = 0x01; + break; + case IUU_PARITY_ODD: + dataout[DataCount++] = 0x02; + break; + case IUU_PARITY_MARK: + dataout[DataCount++] = 0x03; + break; + case IUU_PARITY_SPACE: + dataout[DataCount++] = 0x04; + break; + default: + kfree(dataout); + return IUU_INVALID_PARAMETER; + } + + switch (parity & 0xF0) { + case IUU_ONE_STOP_BIT: + dataout[DataCount - 1] |= IUU_ONE_STOP_BIT; + break; + + case IUU_TWO_STOP_BITS: + dataout[DataCount - 1] |= IUU_TWO_STOP_BITS; + break; + default: + kfree(dataout); + return IUU_INVALID_PARAMETER; + } + + status = bulk_immediate(port, dataout, DataCount); + if (status != IUU_OPERATION_OK) + dev_dbg(&port->dev, "%s - uart_off error\n", __func__); + kfree(dataout); + return status; +} + +static void iuu_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, + const struct ktermios *old_termios) +{ + const u32 supported_mask = CMSPAR|PARENB|PARODD; + struct iuu_private *priv = usb_get_serial_port_data(port); + unsigned int cflag = tty->termios.c_cflag; + int status; + u32 actual; + u32 parity; + int csize = CS7; + int baud; + u32 newval = cflag & supported_mask; + + /* Just use the ospeed. ispeed should be the same. */ + baud = tty->termios.c_ospeed; + + dev_dbg(&port->dev, "%s - enter c_ospeed or baud=%d\n", __func__, baud); + + /* compute the parity parameter */ + parity = 0; + if (cflag & CMSPAR) { /* Using mark space */ + if (cflag & PARODD) + parity |= IUU_PARITY_SPACE; + else + parity |= IUU_PARITY_MARK; + } else if (!(cflag & PARENB)) { + parity |= IUU_PARITY_NONE; + csize = CS8; + } else if (cflag & PARODD) + parity |= IUU_PARITY_ODD; + else + parity |= IUU_PARITY_EVEN; + + parity |= (cflag & CSTOPB ? IUU_TWO_STOP_BITS : IUU_ONE_STOP_BIT); + + /* set it */ + status = iuu_uart_baud(port, + baud * priv->boost / 100, + &actual, parity); + + /* set the termios value to the real one, so the user now what has + * changed. We support few fields so its easies to copy the old hw + * settings back over and then adjust them + */ + if (old_termios) + tty_termios_copy_hw(&tty->termios, old_termios); + if (status != 0) /* Set failed - return old bits */ + return; + /* Re-encode speed, parity and csize */ + tty_encode_baud_rate(tty, baud, baud); + tty->termios.c_cflag &= ~(supported_mask|CSIZE); + tty->termios.c_cflag |= newval | csize; +} + +static void iuu_close(struct usb_serial_port *port) +{ + /* iuu_led (port,255,0,0,0); */ + + iuu_uart_off(port); + + usb_kill_urb(port->write_urb); + usb_kill_urb(port->read_urb); + + iuu_led(port, 0, 0, 0xF000, 0xFF); +} + +static void iuu_init_termios(struct tty_struct *tty) +{ + tty->termios.c_cflag = B9600 | CS8 | CSTOPB | CREAD | PARENB | CLOCAL; + tty->termios.c_ispeed = 9600; + tty->termios.c_ospeed = 9600; + tty->termios.c_lflag = 0; + tty->termios.c_oflag = 0; + tty->termios.c_iflag = 0; +} + +static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct device *dev = &port->dev; + int result; + int baud; + u32 actual; + struct iuu_private *priv = usb_get_serial_port_data(port); + + baud = tty->termios.c_ospeed; + + dev_dbg(dev, "%s - baud %d\n", __func__, baud); + usb_clear_halt(serial->dev, port->write_urb->pipe); + usb_clear_halt(serial->dev, port->read_urb->pipe); + + priv->poll = 0; + +#define SOUP(a, b, c, d) do { \ + result = usb_control_msg(port->serial->dev, \ + usb_sndctrlpipe(port->serial->dev, 0), \ + b, a, c, d, NULL, 0, 1000); \ + dev_dbg(dev, "0x%x:0x%x:0x%x:0x%x %d\n", a, b, c, d, result); } while (0) + + /* This is not UART related but IUU USB driver related or something */ + /* like that. Basically no IUU will accept any commands from the USB */ + /* host unless it has received the following message */ + /* sprintf(buf ,"%c%c%c%c",0x03,0x02,0x02,0x0); */ + + SOUP(0x03, 0x02, 0x02, 0x0); + + iuu_led(port, 0xF000, 0xF000, 0, 0xFF); + iuu_uart_on(port); + if (boost < 100) + boost = 100; + priv->boost = boost; + switch (clockmode) { + case 2: /* 3.680 Mhz */ + priv->clk = IUU_CLK_3680000; + iuu_clk(port, IUU_CLK_3680000 * boost / 100); + result = + iuu_uart_baud(port, baud * boost / 100, &actual, + IUU_PARITY_EVEN); + break; + case 3: /* 6.00 Mhz */ + iuu_clk(port, IUU_CLK_6000000 * boost / 100); + priv->clk = IUU_CLK_6000000; + /* Ratio of 6000000 to 3500000 for baud 9600 */ + result = + iuu_uart_baud(port, 16457 * boost / 100, &actual, + IUU_PARITY_EVEN); + break; + default: /* 3.579 Mhz */ + iuu_clk(port, IUU_CLK_3579000 * boost / 100); + priv->clk = IUU_CLK_3579000; + result = + iuu_uart_baud(port, baud * boost / 100, &actual, + IUU_PARITY_EVEN); + } + + /* set the cardin cardout signals */ + switch (cdmode) { + case 0: + iuu_cardin = 0; + iuu_cardout = 0; + break; + case 1: + iuu_cardin = TIOCM_CD; + iuu_cardout = 0; + break; + case 2: + iuu_cardin = 0; + iuu_cardout = TIOCM_CD; + break; + case 3: + iuu_cardin = TIOCM_DSR; + iuu_cardout = 0; + break; + case 4: + iuu_cardin = 0; + iuu_cardout = TIOCM_DSR; + break; + case 5: + iuu_cardin = TIOCM_CTS; + iuu_cardout = 0; + break; + case 6: + iuu_cardin = 0; + iuu_cardout = TIOCM_CTS; + break; + case 7: + iuu_cardin = TIOCM_RNG; + iuu_cardout = 0; + break; + case 8: + iuu_cardin = 0; + iuu_cardout = TIOCM_RNG; + } + + iuu_uart_flush(port); + + dev_dbg(dev, "%s - initialization done\n", __func__); + + memset(port->write_urb->transfer_buffer, IUU_UART_RX, 1); + usb_fill_bulk_urb(port->write_urb, port->serial->dev, + usb_sndbulkpipe(port->serial->dev, + port->bulk_out_endpointAddress), + port->write_urb->transfer_buffer, 1, + read_rxcmd_callback, port); + result = usb_submit_urb(port->write_urb, GFP_KERNEL); + if (result) { + dev_err(dev, "%s - failed submitting read urb, error %d\n", __func__, result); + iuu_close(port); + } else { + dev_dbg(dev, "%s - rxcmd OK\n", __func__); + } + + return result; +} + +/* how to change VCC */ +static int iuu_vcc_set(struct usb_serial_port *port, unsigned int vcc) +{ + int status; + u8 *buf; + + buf = kmalloc(5, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + buf[0] = IUU_SET_VCC; + buf[1] = vcc & 0xFF; + buf[2] = (vcc >> 8) & 0xFF; + buf[3] = (vcc >> 16) & 0xFF; + buf[4] = (vcc >> 24) & 0xFF; + + status = bulk_immediate(port, buf, 5); + kfree(buf); + + if (status != IUU_OPERATION_OK) + dev_dbg(&port->dev, "%s - vcc error status = %2x\n", __func__, status); + else + dev_dbg(&port->dev, "%s - vcc OK !\n", __func__); + + return status; +} + +/* + * Sysfs Attributes + */ + +static ssize_t vcc_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_serial_port *port = to_usb_serial_port(dev); + struct iuu_private *priv = usb_get_serial_port_data(port); + + return sprintf(buf, "%d\n", priv->vcc); +} + +static ssize_t vcc_mode_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct usb_serial_port *port = to_usb_serial_port(dev); + struct iuu_private *priv = usb_get_serial_port_data(port); + unsigned long v; + + if (kstrtoul(buf, 10, &v)) { + dev_err(dev, "%s - vcc_mode: %s is not a unsigned long\n", + __func__, buf); + goto fail_store_vcc_mode; + } + + dev_dbg(dev, "%s: setting vcc_mode = %ld\n", __func__, v); + + if ((v != 3) && (v != 5)) { + dev_err(dev, "%s - vcc_mode %ld is invalid\n", __func__, v); + } else { + iuu_vcc_set(port, v); + priv->vcc = v; + } +fail_store_vcc_mode: + return count; +} +static DEVICE_ATTR_RW(vcc_mode); + +static int iuu_create_sysfs_attrs(struct usb_serial_port *port) +{ + return device_create_file(&port->dev, &dev_attr_vcc_mode); +} + +static int iuu_remove_sysfs_attrs(struct usb_serial_port *port) +{ + device_remove_file(&port->dev, &dev_attr_vcc_mode); + return 0; +} + +/* + * End Sysfs Attributes + */ + +static struct usb_serial_driver iuu_device = { + .driver = { + .owner = THIS_MODULE, + .name = "iuu_phoenix", + }, + .id_table = id_table, + .num_ports = 1, + .num_bulk_in = 1, + .num_bulk_out = 1, + .bulk_in_size = 512, + .bulk_out_size = 512, + .open = iuu_open, + .close = iuu_close, + .write = iuu_uart_write, + .read_bulk_callback = iuu_uart_read_callback, + .tiocmget = iuu_tiocmget, + .tiocmset = iuu_tiocmset, + .set_termios = iuu_set_termios, + .init_termios = iuu_init_termios, + .port_probe = iuu_port_probe, + .port_remove = iuu_port_remove, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &iuu_device, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_AUTHOR("Alain Degreffe eczema@ecze.com"); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +module_param(xmas, bool, 0644); +MODULE_PARM_DESC(xmas, "Xmas colors enabled or not"); + +module_param(boost, int, 0644); +MODULE_PARM_DESC(boost, "Card overclock boost (in percent 100-500)"); + +module_param(clockmode, int, 0644); +MODULE_PARM_DESC(clockmode, "Card clock mode (1=3.579 MHz, 2=3.680 MHz, " + "3=6 Mhz)"); + +module_param(cdmode, int, 0644); +MODULE_PARM_DESC(cdmode, "Card detect mode (0=none, 1=CD, 2=!CD, 3=DSR, " + "4=!DSR, 5=CTS, 6=!CTS, 7=RING, 8=!RING)"); + +module_param(vcc_default, int, 0644); +MODULE_PARM_DESC(vcc_default, "Set default VCC (either 3 for 3.3V or 5 " + "for 5V). Default to 5."); |