diff options
Diffstat (limited to 'drivers/usb/serial/keyspan.c')
| -rw-r--r-- | drivers/usb/serial/keyspan.c | 3108 |
1 files changed, 3108 insertions, 0 deletions
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c new file mode 100644 index 0000000000..93b17e0e05 --- /dev/null +++ b/drivers/usb/serial/keyspan.c @@ -0,0 +1,3108 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + Keyspan USB to Serial Converter driver + + (C) Copyright (C) 2000-2001 Hugh Blemings <hugh@blemings.org> + (C) Copyright (C) 2002 Greg Kroah-Hartman <greg@kroah.com> + + See http://blemings.org/hugh/keyspan.html for more information. + + Code in this driver inspired by and in a number of places taken + from Brian Warner's original Keyspan-PDA driver. + + This driver has been put together with the support of Innosys, Inc. + and Keyspan, Inc the manufacturers of the Keyspan USB-serial products. + Thanks Guys :) + + Thanks to Paulus for miscellaneous tidy ups, some largish chunks + of much nicer and/or completely new code and (perhaps most uniquely) + having the patience to sit down and explain why and where he'd changed + stuff. + + Tip 'o the hat to IBM (and previously Linuxcare :) for supporting + staff in their work on open source projects. +*/ + + +#include <linux/kernel.h> +#include <linux/jiffies.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/uaccess.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/usb/ezusb.h> + +#define DRIVER_AUTHOR "Hugh Blemings <hugh@misc.nu" +#define DRIVER_DESC "Keyspan USB to Serial Converter Driver" + +static void keyspan_send_setup(struct usb_serial_port *port, int reset_port); + +static int keyspan_usa19_calc_baud(struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, + u8 *rate_hi, u8 *rate_low, + u8 *prescaler, int portnum); +static int keyspan_usa19w_calc_baud(struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, + u8 *rate_hi, u8 *rate_low, + u8 *prescaler, int portnum); +static int keyspan_usa28_calc_baud(struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, + u8 *rate_hi, u8 *rate_low, + u8 *prescaler, int portnum); +static int keyspan_usa19hs_calc_baud(struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, + u8 *rate_hi, u8 *rate_low, + u8 *prescaler, int portnum); + +static int keyspan_usa28_send_setup(struct usb_serial *serial, + struct usb_serial_port *port, + int reset_port); +static int keyspan_usa26_send_setup(struct usb_serial *serial, + struct usb_serial_port *port, + int reset_port); +static int keyspan_usa49_send_setup(struct usb_serial *serial, + struct usb_serial_port *port, + int reset_port); +static int keyspan_usa90_send_setup(struct usb_serial *serial, + struct usb_serial_port *port, + int reset_port); +static int keyspan_usa67_send_setup(struct usb_serial *serial, + struct usb_serial_port *port, + int reset_port); + +/* Values used for baud rate calculation - device specific */ +#define KEYSPAN_INVALID_BAUD_RATE (-1) +#define KEYSPAN_BAUD_RATE_OK (0) +#define KEYSPAN_USA18X_BAUDCLK (12000000L) /* a guess */ +#define KEYSPAN_USA19_BAUDCLK (12000000L) +#define KEYSPAN_USA19W_BAUDCLK (24000000L) +#define KEYSPAN_USA19HS_BAUDCLK (14769231L) +#define KEYSPAN_USA28_BAUDCLK (1843200L) +#define KEYSPAN_USA28X_BAUDCLK (12000000L) +#define KEYSPAN_USA49W_BAUDCLK (48000000L) + +/* Some constants used to characterise each device. */ +#define KEYSPAN_MAX_NUM_PORTS (4) +#define KEYSPAN_MAX_FLIPS (2) + +/* + * Device info for the Keyspan serial converter, used by the overall + * usb-serial probe function. + */ +#define KEYSPAN_VENDOR_ID (0x06cd) + +/* Product IDs for the products supported, pre-renumeration */ +#define keyspan_usa18x_pre_product_id 0x0105 +#define keyspan_usa19_pre_product_id 0x0103 +#define keyspan_usa19qi_pre_product_id 0x010b +#define keyspan_mpr_pre_product_id 0x011b +#define keyspan_usa19qw_pre_product_id 0x0118 +#define keyspan_usa19w_pre_product_id 0x0106 +#define keyspan_usa28_pre_product_id 0x0101 +#define keyspan_usa28x_pre_product_id 0x0102 +#define keyspan_usa28xa_pre_product_id 0x0114 +#define keyspan_usa28xb_pre_product_id 0x0113 +#define keyspan_usa49w_pre_product_id 0x0109 +#define keyspan_usa49wlc_pre_product_id 0x011a + +/* + * Product IDs post-renumeration. Note that the 28x and 28xb have the same + * id's post-renumeration but behave identically so it's not an issue. As + * such, the 28xb is not listed in any of the device tables. + */ +#define keyspan_usa18x_product_id 0x0112 +#define keyspan_usa19_product_id 0x0107 +#define keyspan_usa19qi_product_id 0x010c +#define keyspan_usa19hs_product_id 0x0121 +#define keyspan_mpr_product_id 0x011c +#define keyspan_usa19qw_product_id 0x0119 +#define keyspan_usa19w_product_id 0x0108 +#define keyspan_usa28_product_id 0x010f +#define keyspan_usa28x_product_id 0x0110 +#define keyspan_usa28xa_product_id 0x0115 +#define keyspan_usa28xb_product_id 0x0110 +#define keyspan_usa28xg_product_id 0x0135 +#define keyspan_usa49w_product_id 0x010a +#define keyspan_usa49wlc_product_id 0x012a +#define keyspan_usa49wg_product_id 0x0131 + +struct keyspan_device_details { + /* product ID value */ + int product_id; + + enum {msg_usa26, msg_usa28, msg_usa49, msg_usa90, msg_usa67} msg_format; + + /* Number of physical ports */ + int num_ports; + + /* 1 if endpoint flipping used on input, 0 if not */ + int indat_endp_flip; + + /* 1 if endpoint flipping used on output, 0 if not */ + int outdat_endp_flip; + + /* + * Table mapping input data endpoint IDs to physical port + * number and flip if used + */ + int indat_endpoints[KEYSPAN_MAX_NUM_PORTS]; + + /* Same for output endpoints */ + int outdat_endpoints[KEYSPAN_MAX_NUM_PORTS]; + + /* Input acknowledge endpoints */ + int inack_endpoints[KEYSPAN_MAX_NUM_PORTS]; + + /* Output control endpoints */ + int outcont_endpoints[KEYSPAN_MAX_NUM_PORTS]; + + /* Endpoint used for input status */ + int instat_endpoint; + + /* Endpoint used for input data 49WG only */ + int indat_endpoint; + + /* Endpoint used for global control functions */ + int glocont_endpoint; + + int (*calculate_baud_rate)(struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, + u8 *rate_hi, u8 *rate_low, u8 *prescaler, + int portnum); + u32 baudclk; +}; + +/* + * Now for each device type we setup the device detail structure with the + * appropriate information (provided in Keyspan's documentation) + */ + +static const struct keyspan_device_details usa18x_device_details = { + .product_id = keyspan_usa18x_product_id, + .msg_format = msg_usa26, + .num_ports = 1, + .indat_endp_flip = 0, + .outdat_endp_flip = 1, + .indat_endpoints = {0x81}, + .outdat_endpoints = {0x01}, + .inack_endpoints = {0x85}, + .outcont_endpoints = {0x05}, + .instat_endpoint = 0x87, + .indat_endpoint = -1, + .glocont_endpoint = 0x07, + .calculate_baud_rate = keyspan_usa19w_calc_baud, + .baudclk = KEYSPAN_USA18X_BAUDCLK, +}; + +static const struct keyspan_device_details usa19_device_details = { + .product_id = keyspan_usa19_product_id, + .msg_format = msg_usa28, + .num_ports = 1, + .indat_endp_flip = 1, + .outdat_endp_flip = 1, + .indat_endpoints = {0x81}, + .outdat_endpoints = {0x01}, + .inack_endpoints = {0x83}, + .outcont_endpoints = {0x03}, + .instat_endpoint = 0x84, + .indat_endpoint = -1, + .glocont_endpoint = -1, + .calculate_baud_rate = keyspan_usa19_calc_baud, + .baudclk = KEYSPAN_USA19_BAUDCLK, +}; + +static const struct keyspan_device_details usa19qi_device_details = { + .product_id = keyspan_usa19qi_product_id, + .msg_format = msg_usa28, + .num_ports = 1, + .indat_endp_flip = 1, + .outdat_endp_flip = 1, + .indat_endpoints = {0x81}, + .outdat_endpoints = {0x01}, + .inack_endpoints = {0x83}, + .outcont_endpoints = {0x03}, + .instat_endpoint = 0x84, + .indat_endpoint = -1, + .glocont_endpoint = -1, + .calculate_baud_rate = keyspan_usa28_calc_baud, + .baudclk = KEYSPAN_USA19_BAUDCLK, +}; + +static const struct keyspan_device_details mpr_device_details = { + .product_id = keyspan_mpr_product_id, + .msg_format = msg_usa28, + .num_ports = 1, + .indat_endp_flip = 1, + .outdat_endp_flip = 1, + .indat_endpoints = {0x81}, + .outdat_endpoints = {0x01}, + .inack_endpoints = {0x83}, + .outcont_endpoints = {0x03}, + .instat_endpoint = 0x84, + .indat_endpoint = -1, + .glocont_endpoint = -1, + .calculate_baud_rate = keyspan_usa28_calc_baud, + .baudclk = KEYSPAN_USA19_BAUDCLK, +}; + +static const struct keyspan_device_details usa19qw_device_details = { + .product_id = keyspan_usa19qw_product_id, + .msg_format = msg_usa26, + .num_ports = 1, + .indat_endp_flip = 0, + .outdat_endp_flip = 1, + .indat_endpoints = {0x81}, + .outdat_endpoints = {0x01}, + .inack_endpoints = {0x85}, + .outcont_endpoints = {0x05}, + .instat_endpoint = 0x87, + .indat_endpoint = -1, + .glocont_endpoint = 0x07, + .calculate_baud_rate = keyspan_usa19w_calc_baud, + .baudclk = KEYSPAN_USA19W_BAUDCLK, +}; + +static const struct keyspan_device_details usa19w_device_details = { + .product_id = keyspan_usa19w_product_id, + .msg_format = msg_usa26, + .num_ports = 1, + .indat_endp_flip = 0, + .outdat_endp_flip = 1, + .indat_endpoints = {0x81}, + .outdat_endpoints = {0x01}, + .inack_endpoints = {0x85}, + .outcont_endpoints = {0x05}, + .instat_endpoint = 0x87, + .indat_endpoint = -1, + .glocont_endpoint = 0x07, + .calculate_baud_rate = keyspan_usa19w_calc_baud, + .baudclk = KEYSPAN_USA19W_BAUDCLK, +}; + +static const struct keyspan_device_details usa19hs_device_details = { + .product_id = keyspan_usa19hs_product_id, + .msg_format = msg_usa90, + .num_ports = 1, + .indat_endp_flip = 0, + .outdat_endp_flip = 0, + .indat_endpoints = {0x81}, + .outdat_endpoints = {0x01}, + .inack_endpoints = {-1}, + .outcont_endpoints = {0x02}, + .instat_endpoint = 0x82, + .indat_endpoint = -1, + .glocont_endpoint = -1, + .calculate_baud_rate = keyspan_usa19hs_calc_baud, + .baudclk = KEYSPAN_USA19HS_BAUDCLK, +}; + +static const struct keyspan_device_details usa28_device_details = { + .product_id = keyspan_usa28_product_id, + .msg_format = msg_usa28, + .num_ports = 2, + .indat_endp_flip = 1, + .outdat_endp_flip = 1, + .indat_endpoints = {0x81, 0x83}, + .outdat_endpoints = {0x01, 0x03}, + .inack_endpoints = {0x85, 0x86}, + .outcont_endpoints = {0x05, 0x06}, + .instat_endpoint = 0x87, + .indat_endpoint = -1, + .glocont_endpoint = 0x07, + .calculate_baud_rate = keyspan_usa28_calc_baud, + .baudclk = KEYSPAN_USA28_BAUDCLK, +}; + +static const struct keyspan_device_details usa28x_device_details = { + .product_id = keyspan_usa28x_product_id, + .msg_format = msg_usa26, + .num_ports = 2, + .indat_endp_flip = 0, + .outdat_endp_flip = 1, + .indat_endpoints = {0x81, 0x83}, + .outdat_endpoints = {0x01, 0x03}, + .inack_endpoints = {0x85, 0x86}, + .outcont_endpoints = {0x05, 0x06}, + .instat_endpoint = 0x87, + .indat_endpoint = -1, + .glocont_endpoint = 0x07, + .calculate_baud_rate = keyspan_usa19w_calc_baud, + .baudclk = KEYSPAN_USA28X_BAUDCLK, +}; + +static const struct keyspan_device_details usa28xa_device_details = { + .product_id = keyspan_usa28xa_product_id, + .msg_format = msg_usa26, + .num_ports = 2, + .indat_endp_flip = 0, + .outdat_endp_flip = 1, + .indat_endpoints = {0x81, 0x83}, + .outdat_endpoints = {0x01, 0x03}, + .inack_endpoints = {0x85, 0x86}, + .outcont_endpoints = {0x05, 0x06}, + .instat_endpoint = 0x87, + .indat_endpoint = -1, + .glocont_endpoint = 0x07, + .calculate_baud_rate = keyspan_usa19w_calc_baud, + .baudclk = KEYSPAN_USA28X_BAUDCLK, +}; + +static const struct keyspan_device_details usa28xg_device_details = { + .product_id = keyspan_usa28xg_product_id, + .msg_format = msg_usa67, + .num_ports = 2, + .indat_endp_flip = 0, + .outdat_endp_flip = 0, + .indat_endpoints = {0x84, 0x88}, + .outdat_endpoints = {0x02, 0x06}, + .inack_endpoints = {-1, -1}, + .outcont_endpoints = {-1, -1}, + .instat_endpoint = 0x81, + .indat_endpoint = -1, + .glocont_endpoint = 0x01, + .calculate_baud_rate = keyspan_usa19w_calc_baud, + .baudclk = KEYSPAN_USA28X_BAUDCLK, +}; +/* + * We don't need a separate entry for the usa28xb as it appears as a 28x + * anyway. + */ + +static const struct keyspan_device_details usa49w_device_details = { + .product_id = keyspan_usa49w_product_id, + .msg_format = msg_usa49, + .num_ports = 4, + .indat_endp_flip = 0, + .outdat_endp_flip = 0, + .indat_endpoints = {0x81, 0x82, 0x83, 0x84}, + .outdat_endpoints = {0x01, 0x02, 0x03, 0x04}, + .inack_endpoints = {-1, -1, -1, -1}, + .outcont_endpoints = {-1, -1, -1, -1}, + .instat_endpoint = 0x87, + .indat_endpoint = -1, + .glocont_endpoint = 0x07, + .calculate_baud_rate = keyspan_usa19w_calc_baud, + .baudclk = KEYSPAN_USA49W_BAUDCLK, +}; + +static const struct keyspan_device_details usa49wlc_device_details = { + .product_id = keyspan_usa49wlc_product_id, + .msg_format = msg_usa49, + .num_ports = 4, + .indat_endp_flip = 0, + .outdat_endp_flip = 0, + .indat_endpoints = {0x81, 0x82, 0x83, 0x84}, + .outdat_endpoints = {0x01, 0x02, 0x03, 0x04}, + .inack_endpoints = {-1, -1, -1, -1}, + .outcont_endpoints = {-1, -1, -1, -1}, + .instat_endpoint = 0x87, + .indat_endpoint = -1, + .glocont_endpoint = 0x07, + .calculate_baud_rate = keyspan_usa19w_calc_baud, + .baudclk = KEYSPAN_USA19W_BAUDCLK, +}; + +static const struct keyspan_device_details usa49wg_device_details = { + .product_id = keyspan_usa49wg_product_id, + .msg_format = msg_usa49, + .num_ports = 4, + .indat_endp_flip = 0, + .outdat_endp_flip = 0, + .indat_endpoints = {-1, -1, -1, -1}, /* single 'global' data in EP */ + .outdat_endpoints = {0x01, 0x02, 0x04, 0x06}, + .inack_endpoints = {-1, -1, -1, -1}, + .outcont_endpoints = {-1, -1, -1, -1}, + .instat_endpoint = 0x81, + .indat_endpoint = 0x88, + .glocont_endpoint = 0x00, /* uses control EP */ + .calculate_baud_rate = keyspan_usa19w_calc_baud, + .baudclk = KEYSPAN_USA19W_BAUDCLK, +}; + +static const struct keyspan_device_details *keyspan_devices[] = { + &usa18x_device_details, + &usa19_device_details, + &usa19qi_device_details, + &mpr_device_details, + &usa19qw_device_details, + &usa19w_device_details, + &usa19hs_device_details, + &usa28_device_details, + &usa28x_device_details, + &usa28xa_device_details, + &usa28xg_device_details, + /* 28xb not required as it renumerates as a 28x */ + &usa49w_device_details, + &usa49wlc_device_details, + &usa49wg_device_details, + NULL, +}; + +static const struct usb_device_id keyspan_ids_combined[] = { + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19hs_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id)}, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)}, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)}, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, keyspan_ids_combined); + +/* usb_device_id table for the pre-firmware download keyspan devices */ +static const struct usb_device_id keyspan_pre_ids[] = { + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_pre_product_id) }, + { } /* Terminating entry */ +}; + +static const struct usb_device_id keyspan_1port_ids[] = { + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19hs_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_product_id) }, + { } /* Terminating entry */ +}; + +static const struct usb_device_id keyspan_2port_ids[] = { + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) }, + { } /* Terminating entry */ +}; + +static const struct usb_device_id keyspan_4port_ids[] = { + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)}, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)}, + { } /* Terminating entry */ +}; + +#define INSTAT_BUFLEN 32 +#define GLOCONT_BUFLEN 64 +#define INDAT49W_BUFLEN 512 +#define IN_BUFLEN 64 +#define OUT_BUFLEN 64 +#define INACK_BUFLEN 1 +#define OUTCONT_BUFLEN 64 + + /* Per device and per port private data */ +struct keyspan_serial_private { + const struct keyspan_device_details *device_details; + + struct urb *instat_urb; + char *instat_buf; + + /* added to support 49wg, where data from all 4 ports comes in + on 1 EP and high-speed supported */ + struct urb *indat_urb; + char *indat_buf; + + /* XXX this one probably will need a lock */ + struct urb *glocont_urb; + char *glocont_buf; + char *ctrl_buf; /* for EP0 control message */ +}; + +struct keyspan_port_private { + /* Keep track of which input & output endpoints to use */ + int in_flip; + int out_flip; + + /* Keep duplicate of device details in each port + structure as well - simplifies some of the + callback functions etc. */ + const struct keyspan_device_details *device_details; + + /* Input endpoints and buffer for this port */ + struct urb *in_urbs[2]; + char *in_buffer[2]; + /* Output endpoints and buffer for this port */ + struct urb *out_urbs[2]; + char *out_buffer[2]; + + /* Input ack endpoint */ + struct urb *inack_urb; + char *inack_buffer; + + /* Output control endpoint */ + struct urb *outcont_urb; + char *outcont_buffer; + + /* Settings for the port */ + int baud; + int old_baud; + unsigned int cflag; + unsigned int old_cflag; + enum {flow_none, flow_cts, flow_xon} flow_control; + int rts_state; /* Handshaking pins (outputs) */ + int dtr_state; + int cts_state; /* Handshaking pins (inputs) */ + int dsr_state; + int dcd_state; + int ri_state; + int break_on; + + unsigned long tx_start_time[2]; + int resend_cont; /* need to resend control packet */ +}; + +/* Include Keyspan message headers. All current Keyspan Adapters + make use of one of five message formats which are referred + to as USA-26, USA-28, USA-49, USA-90, USA-67 by Keyspan and + within this driver. */ +#include "keyspan_usa26msg.h" +#include "keyspan_usa28msg.h" +#include "keyspan_usa49msg.h" +#include "keyspan_usa90msg.h" +#include "keyspan_usa67msg.h" + + +static int keyspan_break_ctl(struct tty_struct *tty, int break_state) +{ + struct usb_serial_port *port = tty->driver_data; + struct keyspan_port_private *p_priv; + + p_priv = usb_get_serial_port_data(port); + + if (break_state == -1) + p_priv->break_on = 1; + else + p_priv->break_on = 0; + + /* FIXME: return errors */ + keyspan_send_setup(port, 0); + + return 0; +} + + +static void keyspan_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, + const struct ktermios *old_termios) +{ + int baud_rate, device_port; + struct keyspan_port_private *p_priv; + const struct keyspan_device_details *d_details; + unsigned int cflag; + + p_priv = usb_get_serial_port_data(port); + d_details = p_priv->device_details; + cflag = tty->termios.c_cflag; + device_port = port->port_number; + + /* Baud rate calculation takes baud rate as an integer + so other rates can be generated if desired. */ + baud_rate = tty_get_baud_rate(tty); + /* If no match or invalid, don't change */ + if (d_details->calculate_baud_rate(port, baud_rate, d_details->baudclk, + NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) { + /* FIXME - more to do here to ensure rate changes cleanly */ + /* FIXME - calculate exact rate from divisor ? */ + p_priv->baud = baud_rate; + } else + baud_rate = tty_termios_baud_rate(old_termios); + + tty_encode_baud_rate(tty, baud_rate, baud_rate); + /* set CTS/RTS handshake etc. */ + p_priv->cflag = cflag; + p_priv->flow_control = (cflag & CRTSCTS) ? flow_cts : flow_none; + + /* Mark/Space not supported */ + tty->termios.c_cflag &= ~CMSPAR; + + keyspan_send_setup(port, 0); +} + +static int keyspan_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct keyspan_port_private *p_priv = usb_get_serial_port_data(port); + unsigned int value; + + value = ((p_priv->rts_state) ? TIOCM_RTS : 0) | + ((p_priv->dtr_state) ? TIOCM_DTR : 0) | + ((p_priv->cts_state) ? TIOCM_CTS : 0) | + ((p_priv->dsr_state) ? TIOCM_DSR : 0) | + ((p_priv->dcd_state) ? TIOCM_CAR : 0) | + ((p_priv->ri_state) ? TIOCM_RNG : 0); + + return value; +} + +static int keyspan_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct keyspan_port_private *p_priv = usb_get_serial_port_data(port); + + if (set & TIOCM_RTS) + p_priv->rts_state = 1; + if (set & TIOCM_DTR) + p_priv->dtr_state = 1; + if (clear & TIOCM_RTS) + p_priv->rts_state = 0; + if (clear & TIOCM_DTR) + p_priv->dtr_state = 0; + keyspan_send_setup(port, 0); + return 0; +} + +/* Write function is similar for the four protocols used + with only a minor change for usa90 (usa19hs) required */ +static int keyspan_write(struct tty_struct *tty, + struct usb_serial_port *port, const unsigned char *buf, int count) +{ + struct keyspan_port_private *p_priv; + const struct keyspan_device_details *d_details; + int flip; + int left, todo; + struct urb *this_urb; + int err, maxDataLen, dataOffset; + + p_priv = usb_get_serial_port_data(port); + d_details = p_priv->device_details; + + if (d_details->msg_format == msg_usa90) { + maxDataLen = 64; + dataOffset = 0; + } else { + maxDataLen = 63; + dataOffset = 1; + } + + dev_dbg(&port->dev, "%s - %d chars, flip=%d\n", __func__, count, + p_priv->out_flip); + + for (left = count; left > 0; left -= todo) { + todo = left; + if (todo > maxDataLen) + todo = maxDataLen; + + flip = p_priv->out_flip; + + /* Check we have a valid urb/endpoint before we use it... */ + this_urb = p_priv->out_urbs[flip]; + if (this_urb == NULL) { + /* no bulk out, so return 0 bytes written */ + dev_dbg(&port->dev, "%s - no output urb :(\n", __func__); + return count; + } + + dev_dbg(&port->dev, "%s - endpoint %x flip %d\n", + __func__, usb_pipeendpoint(this_urb->pipe), flip); + + if (this_urb->status == -EINPROGRESS) { + if (time_before(jiffies, + p_priv->tx_start_time[flip] + 10 * HZ)) + break; + usb_unlink_urb(this_urb); + break; + } + + /* First byte in buffer is "last flag" (except for usa19hx) + - unused so for now so set to zero */ + ((char *)this_urb->transfer_buffer)[0] = 0; + + memcpy(this_urb->transfer_buffer + dataOffset, buf, todo); + buf += todo; + + /* send the data out the bulk port */ + this_urb->transfer_buffer_length = todo + dataOffset; + + err = usb_submit_urb(this_urb, GFP_ATOMIC); + if (err != 0) + dev_dbg(&port->dev, "usb_submit_urb(write bulk) failed (%d)\n", err); + p_priv->tx_start_time[flip] = jiffies; + + /* Flip for next time if usa26 or usa28 interface + (not used on usa49) */ + p_priv->out_flip = (flip + 1) & d_details->outdat_endp_flip; + } + + return count - left; +} + +static void usa26_indat_callback(struct urb *urb) +{ + int i, err; + int endpoint; + struct usb_serial_port *port; + unsigned char *data = urb->transfer_buffer; + int status = urb->status; + + endpoint = usb_pipeendpoint(urb->pipe); + + if (status) { + dev_dbg(&urb->dev->dev, "%s - nonzero status %d on endpoint %x\n", + __func__, status, endpoint); + return; + } + + port = urb->context; + if (urb->actual_length) { + /* 0x80 bit is error flag */ + if ((data[0] & 0x80) == 0) { + /* no errors on individual bytes, only + possible overrun err */ + if (data[0] & RXERROR_OVERRUN) { + tty_insert_flip_char(&port->port, 0, + TTY_OVERRUN); + } + for (i = 1; i < urb->actual_length ; ++i) + tty_insert_flip_char(&port->port, data[i], + TTY_NORMAL); + } else { + /* some bytes had errors, every byte has status */ + dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__); + for (i = 0; i + 1 < urb->actual_length; i += 2) { + int stat = data[i]; + int flag = TTY_NORMAL; + + if (stat & RXERROR_OVERRUN) { + tty_insert_flip_char(&port->port, 0, + TTY_OVERRUN); + } + /* XXX should handle break (0x10) */ + if (stat & RXERROR_PARITY) + flag = TTY_PARITY; + else if (stat & RXERROR_FRAMING) + flag = TTY_FRAME; + + tty_insert_flip_char(&port->port, data[i+1], + flag); + } + } + tty_flip_buffer_push(&port->port); + } + + /* Resubmit urb so we continue receiving */ + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); +} + +/* Outdat handling is common for all devices */ +static void usa2x_outdat_callback(struct urb *urb) +{ + struct usb_serial_port *port; + struct keyspan_port_private *p_priv; + + port = urb->context; + p_priv = usb_get_serial_port_data(port); + dev_dbg(&port->dev, "%s - urb %d\n", __func__, urb == p_priv->out_urbs[1]); + + usb_serial_port_softint(port); +} + +static void usa26_inack_callback(struct urb *urb) +{ +} + +static void usa26_outcont_callback(struct urb *urb) +{ + struct usb_serial_port *port; + struct keyspan_port_private *p_priv; + + port = urb->context; + p_priv = usb_get_serial_port_data(port); + + if (p_priv->resend_cont) { + dev_dbg(&port->dev, "%s - sending setup\n", __func__); + keyspan_usa26_send_setup(port->serial, port, + p_priv->resend_cont - 1); + } +} + +static void usa26_instat_callback(struct urb *urb) +{ + unsigned char *data = urb->transfer_buffer; + struct keyspan_usa26_portStatusMessage *msg; + struct usb_serial *serial; + struct usb_serial_port *port; + struct keyspan_port_private *p_priv; + int old_dcd_state, err; + int status = urb->status; + + serial = urb->context; + + if (status) { + dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n", + __func__, status); + return; + } + if (urb->actual_length != 9) { + dev_dbg(&urb->dev->dev, "%s - %d byte report??\n", __func__, urb->actual_length); + goto exit; + } + + msg = (struct keyspan_usa26_portStatusMessage *)data; + + /* Check port number from message and retrieve private data */ + if (msg->port >= serial->num_ports) { + dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port); + goto exit; + } + port = serial->port[msg->port]; + p_priv = usb_get_serial_port_data(port); + if (!p_priv) + goto resubmit; + + /* Update handshaking pin state information */ + old_dcd_state = p_priv->dcd_state; + p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0); + p_priv->dsr_state = ((msg->dsr) ? 1 : 0); + p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0); + p_priv->ri_state = ((msg->ri) ? 1 : 0); + + if (old_dcd_state != p_priv->dcd_state) + tty_port_tty_hangup(&port->port, true); +resubmit: + /* Resubmit urb so we continue receiving */ + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); +exit: ; +} + +static void usa26_glocont_callback(struct urb *urb) +{ +} + + +static void usa28_indat_callback(struct urb *urb) +{ + int err; + struct usb_serial_port *port; + unsigned char *data; + struct keyspan_port_private *p_priv; + int status = urb->status; + + port = urb->context; + p_priv = usb_get_serial_port_data(port); + data = urb->transfer_buffer; + + if (urb != p_priv->in_urbs[p_priv->in_flip]) + return; + + do { + if (status) { + dev_dbg(&urb->dev->dev, "%s - nonzero status %d on endpoint %x\n", + __func__, status, usb_pipeendpoint(urb->pipe)); + return; + } + + port = urb->context; + p_priv = usb_get_serial_port_data(port); + data = urb->transfer_buffer; + + if (urb->actual_length) { + tty_insert_flip_string(&port->port, data, + urb->actual_length); + tty_flip_buffer_push(&port->port); + } + + /* Resubmit urb so we continue receiving */ + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", + __func__, err); + p_priv->in_flip ^= 1; + + urb = p_priv->in_urbs[p_priv->in_flip]; + } while (urb->status != -EINPROGRESS); +} + +static void usa28_inack_callback(struct urb *urb) +{ +} + +static void usa28_outcont_callback(struct urb *urb) +{ + struct usb_serial_port *port; + struct keyspan_port_private *p_priv; + + port = urb->context; + p_priv = usb_get_serial_port_data(port); + + if (p_priv->resend_cont) { + dev_dbg(&port->dev, "%s - sending setup\n", __func__); + keyspan_usa28_send_setup(port->serial, port, + p_priv->resend_cont - 1); + } +} + +static void usa28_instat_callback(struct urb *urb) +{ + int err; + unsigned char *data = urb->transfer_buffer; + struct keyspan_usa28_portStatusMessage *msg; + struct usb_serial *serial; + struct usb_serial_port *port; + struct keyspan_port_private *p_priv; + int old_dcd_state; + int status = urb->status; + + serial = urb->context; + + if (status) { + dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n", + __func__, status); + return; + } + + if (urb->actual_length != sizeof(struct keyspan_usa28_portStatusMessage)) { + dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length); + goto exit; + } + + msg = (struct keyspan_usa28_portStatusMessage *)data; + + /* Check port number from message and retrieve private data */ + if (msg->port >= serial->num_ports) { + dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port); + goto exit; + } + port = serial->port[msg->port]; + p_priv = usb_get_serial_port_data(port); + if (!p_priv) + goto resubmit; + + /* Update handshaking pin state information */ + old_dcd_state = p_priv->dcd_state; + p_priv->cts_state = ((msg->cts) ? 1 : 0); + p_priv->dsr_state = ((msg->dsr) ? 1 : 0); + p_priv->dcd_state = ((msg->dcd) ? 1 : 0); + p_priv->ri_state = ((msg->ri) ? 1 : 0); + + if (old_dcd_state != p_priv->dcd_state && old_dcd_state) + tty_port_tty_hangup(&port->port, true); +resubmit: + /* Resubmit urb so we continue receiving */ + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); +exit: ; +} + +static void usa28_glocont_callback(struct urb *urb) +{ +} + + +static void usa49_glocont_callback(struct urb *urb) +{ + struct usb_serial *serial; + struct usb_serial_port *port; + struct keyspan_port_private *p_priv; + int i; + + serial = urb->context; + for (i = 0; i < serial->num_ports; ++i) { + port = serial->port[i]; + p_priv = usb_get_serial_port_data(port); + if (!p_priv) + continue; + + if (p_priv->resend_cont) { + dev_dbg(&port->dev, "%s - sending setup\n", __func__); + keyspan_usa49_send_setup(serial, port, + p_priv->resend_cont - 1); + break; + } + } +} + + /* This is actually called glostat in the Keyspan + doco */ +static void usa49_instat_callback(struct urb *urb) +{ + int err; + unsigned char *data = urb->transfer_buffer; + struct keyspan_usa49_portStatusMessage *msg; + struct usb_serial *serial; + struct usb_serial_port *port; + struct keyspan_port_private *p_priv; + int old_dcd_state; + int status = urb->status; + + serial = urb->context; + + if (status) { + dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n", + __func__, status); + return; + } + + if (urb->actual_length != + sizeof(struct keyspan_usa49_portStatusMessage)) { + dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length); + goto exit; + } + + msg = (struct keyspan_usa49_portStatusMessage *)data; + + /* Check port number from message and retrieve private data */ + if (msg->portNumber >= serial->num_ports) { + dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", + __func__, msg->portNumber); + goto exit; + } + port = serial->port[msg->portNumber]; + p_priv = usb_get_serial_port_data(port); + if (!p_priv) + goto resubmit; + + /* Update handshaking pin state information */ + old_dcd_state = p_priv->dcd_state; + p_priv->cts_state = ((msg->cts) ? 1 : 0); + p_priv->dsr_state = ((msg->dsr) ? 1 : 0); + p_priv->dcd_state = ((msg->dcd) ? 1 : 0); + p_priv->ri_state = ((msg->ri) ? 1 : 0); + + if (old_dcd_state != p_priv->dcd_state && old_dcd_state) + tty_port_tty_hangup(&port->port, true); +resubmit: + /* Resubmit urb so we continue receiving */ + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); +exit: ; +} + +static void usa49_inack_callback(struct urb *urb) +{ +} + +static void usa49_indat_callback(struct urb *urb) +{ + int i, err; + int endpoint; + struct usb_serial_port *port; + unsigned char *data = urb->transfer_buffer; + int status = urb->status; + + endpoint = usb_pipeendpoint(urb->pipe); + + if (status) { + dev_dbg(&urb->dev->dev, "%s - nonzero status %d on endpoint %x\n", + __func__, status, endpoint); + return; + } + + port = urb->context; + if (urb->actual_length) { + /* 0x80 bit is error flag */ + if ((data[0] & 0x80) == 0) { + /* no error on any byte */ + tty_insert_flip_string(&port->port, data + 1, + urb->actual_length - 1); + } else { + /* some bytes had errors, every byte has status */ + for (i = 0; i + 1 < urb->actual_length; i += 2) { + int stat = data[i]; + int flag = TTY_NORMAL; + + if (stat & RXERROR_OVERRUN) { + tty_insert_flip_char(&port->port, 0, + TTY_OVERRUN); + } + /* XXX should handle break (0x10) */ + if (stat & RXERROR_PARITY) + flag = TTY_PARITY; + else if (stat & RXERROR_FRAMING) + flag = TTY_FRAME; + + tty_insert_flip_char(&port->port, data[i+1], + flag); + } + } + tty_flip_buffer_push(&port->port); + } + + /* Resubmit urb so we continue receiving */ + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); +} + +static void usa49wg_indat_callback(struct urb *urb) +{ + int i, len, x, err; + struct usb_serial *serial; + struct usb_serial_port *port; + unsigned char *data = urb->transfer_buffer; + int status = urb->status; + + serial = urb->context; + + if (status) { + dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n", + __func__, status); + return; + } + + /* inbound data is in the form P#, len, status, data */ + i = 0; + len = 0; + + while (i < urb->actual_length) { + + /* Check port number from message */ + if (data[i] >= serial->num_ports) { + dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", + __func__, data[i]); + return; + } + port = serial->port[data[i++]]; + len = data[i++]; + + /* 0x80 bit is error flag */ + if ((data[i] & 0x80) == 0) { + /* no error on any byte */ + i++; + for (x = 1; x < len && i < urb->actual_length; ++x) + tty_insert_flip_char(&port->port, + data[i++], 0); + } else { + /* + * some bytes had errors, every byte has status + */ + for (x = 0; x + 1 < len && + i + 1 < urb->actual_length; x += 2) { + int stat = data[i]; + int flag = TTY_NORMAL; + + if (stat & RXERROR_OVERRUN) { + tty_insert_flip_char(&port->port, 0, + TTY_OVERRUN); + } + /* XXX should handle break (0x10) */ + if (stat & RXERROR_PARITY) + flag = TTY_PARITY; + else if (stat & RXERROR_FRAMING) + flag = TTY_FRAME; + + tty_insert_flip_char(&port->port, data[i+1], + flag); + i += 2; + } + } + tty_flip_buffer_push(&port->port); + } + + /* Resubmit urb so we continue receiving */ + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) + dev_dbg(&urb->dev->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); +} + +/* not used, usa-49 doesn't have per-port control endpoints */ +static void usa49_outcont_callback(struct urb *urb) +{ +} + +static void usa90_indat_callback(struct urb *urb) +{ + int i, err; + int endpoint; + struct usb_serial_port *port; + struct keyspan_port_private *p_priv; + unsigned char *data = urb->transfer_buffer; + int status = urb->status; + + endpoint = usb_pipeendpoint(urb->pipe); + + if (status) { + dev_dbg(&urb->dev->dev, "%s - nonzero status %d on endpoint %x\n", + __func__, status, endpoint); + return; + } + + port = urb->context; + p_priv = usb_get_serial_port_data(port); + + if (urb->actual_length) { + /* if current mode is DMA, looks like usa28 format + otherwise looks like usa26 data format */ + + if (p_priv->baud > 57600) + tty_insert_flip_string(&port->port, data, + urb->actual_length); + else { + /* 0x80 bit is error flag */ + if ((data[0] & 0x80) == 0) { + /* no errors on individual bytes, only + possible overrun err*/ + if (data[0] & RXERROR_OVERRUN) { + tty_insert_flip_char(&port->port, 0, + TTY_OVERRUN); + } + for (i = 1; i < urb->actual_length ; ++i) + tty_insert_flip_char(&port->port, + data[i], TTY_NORMAL); + } else { + /* some bytes had errors, every byte has status */ + dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__); + for (i = 0; i + 1 < urb->actual_length; i += 2) { + int stat = data[i]; + int flag = TTY_NORMAL; + + if (stat & RXERROR_OVERRUN) { + tty_insert_flip_char( + &port->port, 0, + TTY_OVERRUN); + } + /* XXX should handle break (0x10) */ + if (stat & RXERROR_PARITY) + flag = TTY_PARITY; + else if (stat & RXERROR_FRAMING) + flag = TTY_FRAME; + + tty_insert_flip_char(&port->port, + data[i+1], flag); + } + } + } + tty_flip_buffer_push(&port->port); + } + + /* Resubmit urb so we continue receiving */ + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); +} + + +static void usa90_instat_callback(struct urb *urb) +{ + unsigned char *data = urb->transfer_buffer; + struct keyspan_usa90_portStatusMessage *msg; + struct usb_serial *serial; + struct usb_serial_port *port; + struct keyspan_port_private *p_priv; + int old_dcd_state, err; + int status = urb->status; + + serial = urb->context; + + if (status) { + dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n", + __func__, status); + return; + } + if (urb->actual_length < 14) { + dev_dbg(&urb->dev->dev, "%s - %d byte report??\n", __func__, urb->actual_length); + goto exit; + } + + msg = (struct keyspan_usa90_portStatusMessage *)data; + + /* Now do something useful with the data */ + + port = serial->port[0]; + p_priv = usb_get_serial_port_data(port); + if (!p_priv) + goto resubmit; + + /* Update handshaking pin state information */ + old_dcd_state = p_priv->dcd_state; + p_priv->cts_state = ((msg->cts) ? 1 : 0); + p_priv->dsr_state = ((msg->dsr) ? 1 : 0); + p_priv->dcd_state = ((msg->dcd) ? 1 : 0); + p_priv->ri_state = ((msg->ri) ? 1 : 0); + + if (old_dcd_state != p_priv->dcd_state && old_dcd_state) + tty_port_tty_hangup(&port->port, true); +resubmit: + /* Resubmit urb so we continue receiving */ + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); +exit: + ; +} + +static void usa90_outcont_callback(struct urb *urb) +{ + struct usb_serial_port *port; + struct keyspan_port_private *p_priv; + + port = urb->context; + p_priv = usb_get_serial_port_data(port); + + if (p_priv->resend_cont) { + dev_dbg(&urb->dev->dev, "%s - sending setup\n", __func__); + keyspan_usa90_send_setup(port->serial, port, + p_priv->resend_cont - 1); + } +} + +/* Status messages from the 28xg */ +static void usa67_instat_callback(struct urb *urb) +{ + int err; + unsigned char *data = urb->transfer_buffer; + struct keyspan_usa67_portStatusMessage *msg; + struct usb_serial *serial; + struct usb_serial_port *port; + struct keyspan_port_private *p_priv; + int old_dcd_state; + int status = urb->status; + + serial = urb->context; + + if (status) { + dev_dbg(&urb->dev->dev, "%s - nonzero status: %d\n", + __func__, status); + return; + } + + if (urb->actual_length != + sizeof(struct keyspan_usa67_portStatusMessage)) { + dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length); + return; + } + + + /* Now do something useful with the data */ + msg = (struct keyspan_usa67_portStatusMessage *)data; + + /* Check port number from message and retrieve private data */ + if (msg->port >= serial->num_ports) { + dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port); + return; + } + + port = serial->port[msg->port]; + p_priv = usb_get_serial_port_data(port); + if (!p_priv) + goto resubmit; + + /* Update handshaking pin state information */ + old_dcd_state = p_priv->dcd_state; + p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0); + p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0); + + if (old_dcd_state != p_priv->dcd_state && old_dcd_state) + tty_port_tty_hangup(&port->port, true); +resubmit: + /* Resubmit urb so we continue receiving */ + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); +} + +static void usa67_glocont_callback(struct urb *urb) +{ + struct usb_serial *serial; + struct usb_serial_port *port; + struct keyspan_port_private *p_priv; + int i; + + serial = urb->context; + for (i = 0; i < serial->num_ports; ++i) { + port = serial->port[i]; + p_priv = usb_get_serial_port_data(port); + if (!p_priv) + continue; + + if (p_priv->resend_cont) { + dev_dbg(&port->dev, "%s - sending setup\n", __func__); + keyspan_usa67_send_setup(serial, port, + p_priv->resend_cont - 1); + break; + } + } +} + +static unsigned int keyspan_write_room(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct keyspan_port_private *p_priv; + const struct keyspan_device_details *d_details; + int flip; + unsigned int data_len; + struct urb *this_urb; + + p_priv = usb_get_serial_port_data(port); + d_details = p_priv->device_details; + + /* FIXME: locking */ + if (d_details->msg_format == msg_usa90) + data_len = 64; + else + data_len = 63; + + flip = p_priv->out_flip; + + /* Check both endpoints to see if any are available. */ + this_urb = p_priv->out_urbs[flip]; + if (this_urb != NULL) { + if (this_urb->status != -EINPROGRESS) + return data_len; + flip = (flip + 1) & d_details->outdat_endp_flip; + this_urb = p_priv->out_urbs[flip]; + if (this_urb != NULL) { + if (this_urb->status != -EINPROGRESS) + return data_len; + } + } + return 0; +} + + +static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct keyspan_port_private *p_priv; + const struct keyspan_device_details *d_details; + int i, err; + int baud_rate, device_port; + struct urb *urb; + unsigned int cflag = 0; + + p_priv = usb_get_serial_port_data(port); + d_details = p_priv->device_details; + + /* Set some sane defaults */ + p_priv->rts_state = 1; + p_priv->dtr_state = 1; + p_priv->baud = 9600; + + /* force baud and lcr to be set on open */ + p_priv->old_baud = 0; + p_priv->old_cflag = 0; + + p_priv->out_flip = 0; + p_priv->in_flip = 0; + + /* Reset low level data toggle and start reading from endpoints */ + for (i = 0; i < 2; i++) { + urb = p_priv->in_urbs[i]; + if (urb == NULL) + continue; + + /* make sure endpoint data toggle is synchronized + with the device */ + usb_clear_halt(urb->dev, urb->pipe); + err = usb_submit_urb(urb, GFP_KERNEL); + if (err != 0) + dev_dbg(&port->dev, "%s - submit urb %d failed (%d)\n", __func__, i, err); + } + + /* Reset low level data toggle on out endpoints */ + for (i = 0; i < 2; i++) { + urb = p_priv->out_urbs[i]; + if (urb == NULL) + continue; + /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), + usb_pipeout(urb->pipe), 0); */ + } + + /* get the terminal config for the setup message now so we don't + * need to send 2 of them */ + + device_port = port->port_number; + if (tty) { + cflag = tty->termios.c_cflag; + /* Baud rate calculation takes baud rate as an integer + so other rates can be generated if desired. */ + baud_rate = tty_get_baud_rate(tty); + /* If no match or invalid, leave as default */ + if (baud_rate >= 0 + && d_details->calculate_baud_rate(port, baud_rate, d_details->baudclk, + NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) { + p_priv->baud = baud_rate; + } + } + /* set CTS/RTS handshake etc. */ + p_priv->cflag = cflag; + p_priv->flow_control = (cflag & CRTSCTS) ? flow_cts : flow_none; + + keyspan_send_setup(port, 1); + /* mdelay(100); */ + /* keyspan_set_termios(port, NULL); */ + + return 0; +} + +static void keyspan_dtr_rts(struct usb_serial_port *port, int on) +{ + struct keyspan_port_private *p_priv = usb_get_serial_port_data(port); + + p_priv->rts_state = on; + p_priv->dtr_state = on; + keyspan_send_setup(port, 0); +} + +static void keyspan_close(struct usb_serial_port *port) +{ + int i; + struct keyspan_port_private *p_priv; + + p_priv = usb_get_serial_port_data(port); + + p_priv->rts_state = 0; + p_priv->dtr_state = 0; + + keyspan_send_setup(port, 2); + /* pilot-xfer seems to work best with this delay */ + mdelay(100); + + p_priv->out_flip = 0; + p_priv->in_flip = 0; + + usb_kill_urb(p_priv->inack_urb); + for (i = 0; i < 2; i++) { + usb_kill_urb(p_priv->in_urbs[i]); + usb_kill_urb(p_priv->out_urbs[i]); + } +} + +/* download the firmware to a pre-renumeration device */ +static int keyspan_fake_startup(struct usb_serial *serial) +{ + char *fw_name; + + dev_dbg(&serial->dev->dev, "Keyspan startup version %04x product %04x\n", + le16_to_cpu(serial->dev->descriptor.bcdDevice), + le16_to_cpu(serial->dev->descriptor.idProduct)); + + if ((le16_to_cpu(serial->dev->descriptor.bcdDevice) & 0x8000) + != 0x8000) { + dev_dbg(&serial->dev->dev, "Firmware already loaded. Quitting.\n"); + return 1; + } + + /* Select firmware image on the basis of idProduct */ + switch (le16_to_cpu(serial->dev->descriptor.idProduct)) { + case keyspan_usa28_pre_product_id: + fw_name = "keyspan/usa28.fw"; + break; + + case keyspan_usa28x_pre_product_id: + fw_name = "keyspan/usa28x.fw"; + break; + + case keyspan_usa28xa_pre_product_id: + fw_name = "keyspan/usa28xa.fw"; + break; + + case keyspan_usa28xb_pre_product_id: + fw_name = "keyspan/usa28xb.fw"; + break; + + case keyspan_usa19_pre_product_id: + fw_name = "keyspan/usa19.fw"; + break; + + case keyspan_usa19qi_pre_product_id: + fw_name = "keyspan/usa19qi.fw"; + break; + + case keyspan_mpr_pre_product_id: + fw_name = "keyspan/mpr.fw"; + break; + + case keyspan_usa19qw_pre_product_id: + fw_name = "keyspan/usa19qw.fw"; + break; + + case keyspan_usa18x_pre_product_id: + fw_name = "keyspan/usa18x.fw"; + break; + + case keyspan_usa19w_pre_product_id: + fw_name = "keyspan/usa19w.fw"; + break; + + case keyspan_usa49w_pre_product_id: + fw_name = "keyspan/usa49w.fw"; + break; + + case keyspan_usa49wlc_pre_product_id: + fw_name = "keyspan/usa49wlc.fw"; + break; + + default: + dev_err(&serial->dev->dev, "Unknown product ID (%04x)\n", + le16_to_cpu(serial->dev->descriptor.idProduct)); + return 1; + } + + dev_dbg(&serial->dev->dev, "Uploading Keyspan %s firmware.\n", fw_name); + + if (ezusb_fx1_ihex_firmware_download(serial->dev, fw_name) < 0) { + dev_err(&serial->dev->dev, "failed to load firmware \"%s\"\n", + fw_name); + return -ENOENT; + } + + /* after downloading firmware Renumeration will occur in a + moment and the new device will bind to the real driver */ + + /* we don't want this device to have a driver assigned to it. */ + return 1; +} + +/* Helper functions used by keyspan_setup_urbs */ +static struct usb_endpoint_descriptor const *find_ep(struct usb_serial const *serial, + int endpoint) +{ + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *ep; + int i; + + iface_desc = serial->interface->cur_altsetting; + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { + ep = &iface_desc->endpoint[i].desc; + if (ep->bEndpointAddress == endpoint) + return ep; + } + dev_warn(&serial->interface->dev, "found no endpoint descriptor for endpoint %x\n", + endpoint); + return NULL; +} + +static struct urb *keyspan_setup_urb(struct usb_serial *serial, int endpoint, + int dir, void *ctx, char *buf, int len, + void (*callback)(struct urb *)) +{ + struct urb *urb; + struct usb_endpoint_descriptor const *ep_desc; + char const *ep_type_name; + + if (endpoint == -1) + return NULL; /* endpoint not needed */ + + dev_dbg(&serial->interface->dev, "%s - alloc for endpoint %x\n", + __func__, endpoint); + urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */ + if (!urb) + return NULL; + + if (endpoint == 0) { + /* control EP filled in when used */ + return urb; + } + + ep_desc = find_ep(serial, endpoint); + if (!ep_desc) { + usb_free_urb(urb); + return NULL; + } + if (usb_endpoint_xfer_int(ep_desc)) { + ep_type_name = "INT"; + usb_fill_int_urb(urb, serial->dev, + usb_sndintpipe(serial->dev, endpoint) | dir, + buf, len, callback, ctx, + ep_desc->bInterval); + } else if (usb_endpoint_xfer_bulk(ep_desc)) { + ep_type_name = "BULK"; + usb_fill_bulk_urb(urb, serial->dev, + usb_sndbulkpipe(serial->dev, endpoint) | dir, + buf, len, callback, ctx); + } else { + dev_warn(&serial->interface->dev, + "unsupported endpoint type %x\n", + usb_endpoint_type(ep_desc)); + usb_free_urb(urb); + return NULL; + } + + dev_dbg(&serial->interface->dev, "%s - using urb %p for %s endpoint %x\n", + __func__, urb, ep_type_name, endpoint); + return urb; +} + +static struct callbacks { + void (*instat_callback)(struct urb *); + void (*glocont_callback)(struct urb *); + void (*indat_callback)(struct urb *); + void (*outdat_callback)(struct urb *); + void (*inack_callback)(struct urb *); + void (*outcont_callback)(struct urb *); +} keyspan_callbacks[] = { + { + /* msg_usa26 callbacks */ + .instat_callback = usa26_instat_callback, + .glocont_callback = usa26_glocont_callback, + .indat_callback = usa26_indat_callback, + .outdat_callback = usa2x_outdat_callback, + .inack_callback = usa26_inack_callback, + .outcont_callback = usa26_outcont_callback, + }, { + /* msg_usa28 callbacks */ + .instat_callback = usa28_instat_callback, + .glocont_callback = usa28_glocont_callback, + .indat_callback = usa28_indat_callback, + .outdat_callback = usa2x_outdat_callback, + .inack_callback = usa28_inack_callback, + .outcont_callback = usa28_outcont_callback, + }, { + /* msg_usa49 callbacks */ + .instat_callback = usa49_instat_callback, + .glocont_callback = usa49_glocont_callback, + .indat_callback = usa49_indat_callback, + .outdat_callback = usa2x_outdat_callback, + .inack_callback = usa49_inack_callback, + .outcont_callback = usa49_outcont_callback, + }, { + /* msg_usa90 callbacks */ + .instat_callback = usa90_instat_callback, + .glocont_callback = usa28_glocont_callback, + .indat_callback = usa90_indat_callback, + .outdat_callback = usa2x_outdat_callback, + .inack_callback = usa28_inack_callback, + .outcont_callback = usa90_outcont_callback, + }, { + /* msg_usa67 callbacks */ + .instat_callback = usa67_instat_callback, + .glocont_callback = usa67_glocont_callback, + .indat_callback = usa26_indat_callback, + .outdat_callback = usa2x_outdat_callback, + .inack_callback = usa26_inack_callback, + .outcont_callback = usa26_outcont_callback, + } +}; + + /* Generic setup urbs function that uses + data in device_details */ +static void keyspan_setup_urbs(struct usb_serial *serial) +{ + struct keyspan_serial_private *s_priv; + const struct keyspan_device_details *d_details; + struct callbacks *cback; + + s_priv = usb_get_serial_data(serial); + d_details = s_priv->device_details; + + /* Setup values for the various callback routines */ + cback = &keyspan_callbacks[d_details->msg_format]; + + /* Allocate and set up urbs for each one that is in use, + starting with instat endpoints */ + s_priv->instat_urb = keyspan_setup_urb + (serial, d_details->instat_endpoint, USB_DIR_IN, + serial, s_priv->instat_buf, INSTAT_BUFLEN, + cback->instat_callback); + + s_priv->indat_urb = keyspan_setup_urb + (serial, d_details->indat_endpoint, USB_DIR_IN, + serial, s_priv->indat_buf, INDAT49W_BUFLEN, + usa49wg_indat_callback); + + s_priv->glocont_urb = keyspan_setup_urb + (serial, d_details->glocont_endpoint, USB_DIR_OUT, + serial, s_priv->glocont_buf, GLOCONT_BUFLEN, + cback->glocont_callback); +} + +/* usa19 function doesn't require prescaler */ +static int keyspan_usa19_calc_baud(struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, + u8 *rate_low, u8 *prescaler, int portnum) +{ + u32 b16, /* baud rate times 16 (actual rate used internally) */ + div, /* divisor */ + cnt; /* inverse of divisor (programmed into 8051) */ + + dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate); + + /* prevent divide by zero... */ + b16 = baud_rate * 16L; + if (b16 == 0) + return KEYSPAN_INVALID_BAUD_RATE; + /* Any "standard" rate over 57k6 is marginal on the USA-19 + as we run out of divisor resolution. */ + if (baud_rate > 57600) + return KEYSPAN_INVALID_BAUD_RATE; + + /* calculate the divisor and the counter (its inverse) */ + div = baudclk / b16; + if (div == 0) + return KEYSPAN_INVALID_BAUD_RATE; + else + cnt = 0 - div; + + if (div > 0xffff) + return KEYSPAN_INVALID_BAUD_RATE; + + /* return the counter values if non-null */ + if (rate_low) + *rate_low = (u8) (cnt & 0xff); + if (rate_hi) + *rate_hi = (u8) ((cnt >> 8) & 0xff); + if (rate_low && rate_hi) + dev_dbg(&port->dev, "%s - %d %02x %02x.\n", + __func__, baud_rate, *rate_hi, *rate_low); + return KEYSPAN_BAUD_RATE_OK; +} + +/* usa19hs function doesn't require prescaler */ +static int keyspan_usa19hs_calc_baud(struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, + u8 *rate_low, u8 *prescaler, int portnum) +{ + u32 b16, /* baud rate times 16 (actual rate used internally) */ + div; /* divisor */ + + dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate); + + /* prevent divide by zero... */ + b16 = baud_rate * 16L; + if (b16 == 0) + return KEYSPAN_INVALID_BAUD_RATE; + + /* calculate the divisor */ + div = baudclk / b16; + if (div == 0) + return KEYSPAN_INVALID_BAUD_RATE; + + if (div > 0xffff) + return KEYSPAN_INVALID_BAUD_RATE; + + /* return the counter values if non-null */ + if (rate_low) + *rate_low = (u8) (div & 0xff); + + if (rate_hi) + *rate_hi = (u8) ((div >> 8) & 0xff); + + if (rate_low && rate_hi) + dev_dbg(&port->dev, "%s - %d %02x %02x.\n", + __func__, baud_rate, *rate_hi, *rate_low); + + return KEYSPAN_BAUD_RATE_OK; +} + +static int keyspan_usa19w_calc_baud(struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, + u8 *rate_low, u8 *prescaler, int portnum) +{ + u32 b16, /* baud rate times 16 (actual rate used internally) */ + clk, /* clock with 13/8 prescaler */ + div, /* divisor using 13/8 prescaler */ + res, /* resulting baud rate using 13/8 prescaler */ + diff, /* error using 13/8 prescaler */ + smallest_diff; + u8 best_prescaler; + int i; + + dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate); + + /* prevent divide by zero */ + b16 = baud_rate * 16L; + if (b16 == 0) + return KEYSPAN_INVALID_BAUD_RATE; + + /* Calculate prescaler by trying them all and looking + for best fit */ + + /* start with largest possible difference */ + smallest_diff = 0xffffffff; + + /* 0 is an invalid prescaler, used as a flag */ + best_prescaler = 0; + + for (i = 8; i <= 0xff; ++i) { + clk = (baudclk * 8) / (u32) i; + + div = clk / b16; + if (div == 0) + continue; + + res = clk / div; + diff = (res > b16) ? (res-b16) : (b16-res); + + if (diff < smallest_diff) { + best_prescaler = i; + smallest_diff = diff; + } + } + + if (best_prescaler == 0) + return KEYSPAN_INVALID_BAUD_RATE; + + clk = (baudclk * 8) / (u32) best_prescaler; + div = clk / b16; + + /* return the divisor and prescaler if non-null */ + if (rate_low) + *rate_low = (u8) (div & 0xff); + if (rate_hi) + *rate_hi = (u8) ((div >> 8) & 0xff); + if (prescaler) { + *prescaler = best_prescaler; + /* dev_dbg(&port->dev, "%s - %d %d\n", __func__, *prescaler, div); */ + } + return KEYSPAN_BAUD_RATE_OK; +} + + /* USA-28 supports different maximum baud rates on each port */ +static int keyspan_usa28_calc_baud(struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, + u8 *rate_low, u8 *prescaler, int portnum) +{ + u32 b16, /* baud rate times 16 (actual rate used internally) */ + div, /* divisor */ + cnt; /* inverse of divisor (programmed into 8051) */ + + dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate); + + /* prevent divide by zero */ + b16 = baud_rate * 16L; + if (b16 == 0) + return KEYSPAN_INVALID_BAUD_RATE; + + /* calculate the divisor and the counter (its inverse) */ + div = KEYSPAN_USA28_BAUDCLK / b16; + if (div == 0) + return KEYSPAN_INVALID_BAUD_RATE; + else + cnt = 0 - div; + + /* check for out of range, based on portnum, + and return result */ + if (portnum == 0) { + if (div > 0xffff) + return KEYSPAN_INVALID_BAUD_RATE; + } else { + if (portnum == 1) { + if (div > 0xff) + return KEYSPAN_INVALID_BAUD_RATE; + } else + return KEYSPAN_INVALID_BAUD_RATE; + } + + /* return the counter values if not NULL + (port 1 will ignore retHi) */ + if (rate_low) + *rate_low = (u8) (cnt & 0xff); + if (rate_hi) + *rate_hi = (u8) ((cnt >> 8) & 0xff); + dev_dbg(&port->dev, "%s - %d OK.\n", __func__, baud_rate); + return KEYSPAN_BAUD_RATE_OK; +} + +static int keyspan_usa26_send_setup(struct usb_serial *serial, + struct usb_serial_port *port, + int reset_port) +{ + struct keyspan_usa26_portControlMessage msg; + struct keyspan_serial_private *s_priv; + struct keyspan_port_private *p_priv; + const struct keyspan_device_details *d_details; + struct urb *this_urb; + int device_port, err; + + dev_dbg(&port->dev, "%s reset=%d\n", __func__, reset_port); + + s_priv = usb_get_serial_data(serial); + p_priv = usb_get_serial_port_data(port); + d_details = s_priv->device_details; + device_port = port->port_number; + + this_urb = p_priv->outcont_urb; + + /* Make sure we have an urb then send the message */ + if (this_urb == NULL) { + dev_dbg(&port->dev, "%s - oops no urb.\n", __func__); + return -1; + } + + dev_dbg(&port->dev, "%s - endpoint %x\n", + __func__, usb_pipeendpoint(this_urb->pipe)); + + /* Save reset port val for resend. + Don't overwrite resend for open/close condition. */ + if ((reset_port + 1) > p_priv->resend_cont) + p_priv->resend_cont = reset_port + 1; + if (this_urb->status == -EINPROGRESS) { + /* dev_dbg(&port->dev, "%s - already writing\n", __func__); */ + mdelay(5); + return -1; + } + + memset(&msg, 0, sizeof(struct keyspan_usa26_portControlMessage)); + + /* Only set baud rate if it's changed */ + if (p_priv->old_baud != p_priv->baud) { + p_priv->old_baud = p_priv->baud; + msg.setClocking = 0xff; + if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, + &msg.baudHi, &msg.baudLo, &msg.prescaler, + device_port) == KEYSPAN_INVALID_BAUD_RATE) { + dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n", + __func__, p_priv->baud); + msg.baudLo = 0; + msg.baudHi = 125; /* Values for 9600 baud */ + msg.prescaler = 10; + } + msg.setPrescaler = 0xff; + } + + msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1; + switch (p_priv->cflag & CSIZE) { + case CS5: + msg.lcr |= USA_DATABITS_5; + break; + case CS6: + msg.lcr |= USA_DATABITS_6; + break; + case CS7: + msg.lcr |= USA_DATABITS_7; + break; + case CS8: + msg.lcr |= USA_DATABITS_8; + break; + } + if (p_priv->cflag & PARENB) { + /* note USA_PARITY_NONE == 0 */ + msg.lcr |= (p_priv->cflag & PARODD) ? + USA_PARITY_ODD : USA_PARITY_EVEN; + } + msg.setLcr = 0xff; + + msg.ctsFlowControl = (p_priv->flow_control == flow_cts); + msg.xonFlowControl = 0; + msg.setFlowControl = 0xff; + msg.forwardingLength = 16; + msg.xonChar = 17; + msg.xoffChar = 19; + + /* Opening port */ + if (reset_port == 1) { + msg._txOn = 1; + msg._txOff = 0; + msg.txFlush = 0; + msg.txBreak = 0; + msg.rxOn = 1; + msg.rxOff = 0; + msg.rxFlush = 1; + msg.rxForward = 0; + msg.returnStatus = 0; + msg.resetDataToggle = 0xff; + } + + /* Closing port */ + else if (reset_port == 2) { + msg._txOn = 0; + msg._txOff = 1; + msg.txFlush = 0; + msg.txBreak = 0; + msg.rxOn = 0; + msg.rxOff = 1; + msg.rxFlush = 1; + msg.rxForward = 0; + msg.returnStatus = 0; + msg.resetDataToggle = 0; + } + + /* Sending intermediate configs */ + else { + msg._txOn = (!p_priv->break_on); + msg._txOff = 0; + msg.txFlush = 0; + msg.txBreak = (p_priv->break_on); + msg.rxOn = 0; + msg.rxOff = 0; + msg.rxFlush = 0; + msg.rxForward = 0; + msg.returnStatus = 0; + msg.resetDataToggle = 0x0; + } + + /* Do handshaking outputs */ + msg.setTxTriState_setRts = 0xff; + msg.txTriState_rts = p_priv->rts_state; + + msg.setHskoa_setDtr = 0xff; + msg.hskoa_dtr = p_priv->dtr_state; + + p_priv->resend_cont = 0; + memcpy(this_urb->transfer_buffer, &msg, sizeof(msg)); + + /* send the data out the device on control endpoint */ + this_urb->transfer_buffer_length = sizeof(msg); + + err = usb_submit_urb(this_urb, GFP_ATOMIC); + if (err != 0) + dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); + return 0; +} + +static int keyspan_usa28_send_setup(struct usb_serial *serial, + struct usb_serial_port *port, + int reset_port) +{ + struct keyspan_usa28_portControlMessage msg; + struct keyspan_serial_private *s_priv; + struct keyspan_port_private *p_priv; + const struct keyspan_device_details *d_details; + struct urb *this_urb; + int device_port, err; + + s_priv = usb_get_serial_data(serial); + p_priv = usb_get_serial_port_data(port); + d_details = s_priv->device_details; + device_port = port->port_number; + + /* only do something if we have a bulk out endpoint */ + this_urb = p_priv->outcont_urb; + if (this_urb == NULL) { + dev_dbg(&port->dev, "%s - oops no urb.\n", __func__); + return -1; + } + + /* Save reset port val for resend. + Don't overwrite resend for open/close condition. */ + if ((reset_port + 1) > p_priv->resend_cont) + p_priv->resend_cont = reset_port + 1; + if (this_urb->status == -EINPROGRESS) { + dev_dbg(&port->dev, "%s already writing\n", __func__); + mdelay(5); + return -1; + } + + memset(&msg, 0, sizeof(struct keyspan_usa28_portControlMessage)); + + msg.setBaudRate = 1; + if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, + &msg.baudHi, &msg.baudLo, NULL, + device_port) == KEYSPAN_INVALID_BAUD_RATE) { + dev_dbg(&port->dev, "%s - Invalid baud rate requested %d.\n", + __func__, p_priv->baud); + msg.baudLo = 0xff; + msg.baudHi = 0xb2; /* Values for 9600 baud */ + } + + /* If parity is enabled, we must calculate it ourselves. */ + msg.parity = 0; /* XXX for now */ + + msg.ctsFlowControl = (p_priv->flow_control == flow_cts); + msg.xonFlowControl = 0; + + /* Do handshaking outputs, DTR is inverted relative to RTS */ + msg.rts = p_priv->rts_state; + msg.dtr = p_priv->dtr_state; + + msg.forwardingLength = 16; + msg.forwardMs = 10; + msg.breakThreshold = 45; + msg.xonChar = 17; + msg.xoffChar = 19; + + /*msg.returnStatus = 1; + msg.resetDataToggle = 0xff;*/ + /* Opening port */ + if (reset_port == 1) { + msg._txOn = 1; + msg._txOff = 0; + msg.txFlush = 0; + msg.txForceXoff = 0; + msg.txBreak = 0; + msg.rxOn = 1; + msg.rxOff = 0; + msg.rxFlush = 1; + msg.rxForward = 0; + msg.returnStatus = 0; + msg.resetDataToggle = 0xff; + } + /* Closing port */ + else if (reset_port == 2) { + msg._txOn = 0; + msg._txOff = 1; + msg.txFlush = 0; + msg.txForceXoff = 0; + msg.txBreak = 0; + msg.rxOn = 0; + msg.rxOff = 1; + msg.rxFlush = 1; + msg.rxForward = 0; + msg.returnStatus = 0; + msg.resetDataToggle = 0; + } + /* Sending intermediate configs */ + else { + msg._txOn = (!p_priv->break_on); + msg._txOff = 0; + msg.txFlush = 0; + msg.txForceXoff = 0; + msg.txBreak = (p_priv->break_on); + msg.rxOn = 0; + msg.rxOff = 0; + msg.rxFlush = 0; + msg.rxForward = 0; + msg.returnStatus = 0; + msg.resetDataToggle = 0x0; + } + + p_priv->resend_cont = 0; + memcpy(this_urb->transfer_buffer, &msg, sizeof(msg)); + + /* send the data out the device on control endpoint */ + this_urb->transfer_buffer_length = sizeof(msg); + + err = usb_submit_urb(this_urb, GFP_ATOMIC); + if (err != 0) + dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed\n", __func__); + + return 0; +} + +static int keyspan_usa49_send_setup(struct usb_serial *serial, + struct usb_serial_port *port, + int reset_port) +{ + struct keyspan_usa49_portControlMessage msg; + struct usb_ctrlrequest *dr = NULL; + struct keyspan_serial_private *s_priv; + struct keyspan_port_private *p_priv; + const struct keyspan_device_details *d_details; + struct urb *this_urb; + int err, device_port; + + s_priv = usb_get_serial_data(serial); + p_priv = usb_get_serial_port_data(port); + d_details = s_priv->device_details; + + this_urb = s_priv->glocont_urb; + + /* Work out which port within the device is being setup */ + device_port = port->port_number; + + /* Make sure we have an urb then send the message */ + if (this_urb == NULL) { + dev_dbg(&port->dev, "%s - oops no urb for port.\n", __func__); + return -1; + } + + dev_dbg(&port->dev, "%s - endpoint %x (%d)\n", + __func__, usb_pipeendpoint(this_urb->pipe), device_port); + + /* Save reset port val for resend. + Don't overwrite resend for open/close condition. */ + if ((reset_port + 1) > p_priv->resend_cont) + p_priv->resend_cont = reset_port + 1; + + if (this_urb->status == -EINPROGRESS) { + /* dev_dbg(&port->dev, "%s - already writing\n", __func__); */ + mdelay(5); + return -1; + } + + memset(&msg, 0, sizeof(struct keyspan_usa49_portControlMessage)); + + msg.portNumber = device_port; + + /* Only set baud rate if it's changed */ + if (p_priv->old_baud != p_priv->baud) { + p_priv->old_baud = p_priv->baud; + msg.setClocking = 0xff; + if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, + &msg.baudHi, &msg.baudLo, &msg.prescaler, + device_port) == KEYSPAN_INVALID_BAUD_RATE) { + dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n", + __func__, p_priv->baud); + msg.baudLo = 0; + msg.baudHi = 125; /* Values for 9600 baud */ + msg.prescaler = 10; + } + /* msg.setPrescaler = 0xff; */ + } + + msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1; + switch (p_priv->cflag & CSIZE) { + case CS5: + msg.lcr |= USA_DATABITS_5; + break; + case CS6: + msg.lcr |= USA_DATABITS_6; + break; + case CS7: + msg.lcr |= USA_DATABITS_7; + break; + case CS8: + msg.lcr |= USA_DATABITS_8; + break; + } + if (p_priv->cflag & PARENB) { + /* note USA_PARITY_NONE == 0 */ + msg.lcr |= (p_priv->cflag & PARODD) ? + USA_PARITY_ODD : USA_PARITY_EVEN; + } + msg.setLcr = 0xff; + + msg.ctsFlowControl = (p_priv->flow_control == flow_cts); + msg.xonFlowControl = 0; + msg.setFlowControl = 0xff; + + msg.forwardingLength = 16; + msg.xonChar = 17; + msg.xoffChar = 19; + + /* Opening port */ + if (reset_port == 1) { + msg._txOn = 1; + msg._txOff = 0; + msg.txFlush = 0; + msg.txBreak = 0; + msg.rxOn = 1; + msg.rxOff = 0; + msg.rxFlush = 1; + msg.rxForward = 0; + msg.returnStatus = 0; + msg.resetDataToggle = 0xff; + msg.enablePort = 1; + msg.disablePort = 0; + } + /* Closing port */ + else if (reset_port == 2) { + msg._txOn = 0; + msg._txOff = 1; + msg.txFlush = 0; + msg.txBreak = 0; + msg.rxOn = 0; + msg.rxOff = 1; + msg.rxFlush = 1; + msg.rxForward = 0; + msg.returnStatus = 0; + msg.resetDataToggle = 0; + msg.enablePort = 0; + msg.disablePort = 1; + } + /* Sending intermediate configs */ + else { + msg._txOn = (!p_priv->break_on); + msg._txOff = 0; + msg.txFlush = 0; + msg.txBreak = (p_priv->break_on); + msg.rxOn = 0; + msg.rxOff = 0; + msg.rxFlush = 0; + msg.rxForward = 0; + msg.returnStatus = 0; + msg.resetDataToggle = 0x0; + msg.enablePort = 0; + msg.disablePort = 0; + } + + /* Do handshaking outputs */ + msg.setRts = 0xff; + msg.rts = p_priv->rts_state; + + msg.setDtr = 0xff; + msg.dtr = p_priv->dtr_state; + + p_priv->resend_cont = 0; + + /* if the device is a 49wg, we send control message on usb + control EP 0 */ + + if (d_details->product_id == keyspan_usa49wg_product_id) { + dr = (void *)(s_priv->ctrl_buf); + dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_OUT; + dr->bRequest = 0xB0; /* 49wg control message */ + dr->wValue = 0; + dr->wIndex = 0; + dr->wLength = cpu_to_le16(sizeof(msg)); + + memcpy(s_priv->glocont_buf, &msg, sizeof(msg)); + + usb_fill_control_urb(this_urb, serial->dev, + usb_sndctrlpipe(serial->dev, 0), + (unsigned char *)dr, s_priv->glocont_buf, + sizeof(msg), usa49_glocont_callback, serial); + + } else { + memcpy(this_urb->transfer_buffer, &msg, sizeof(msg)); + + /* send the data out the device on control endpoint */ + this_urb->transfer_buffer_length = sizeof(msg); + } + err = usb_submit_urb(this_urb, GFP_ATOMIC); + if (err != 0) + dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); + + return 0; +} + +static int keyspan_usa90_send_setup(struct usb_serial *serial, + struct usb_serial_port *port, + int reset_port) +{ + struct keyspan_usa90_portControlMessage msg; + struct keyspan_serial_private *s_priv; + struct keyspan_port_private *p_priv; + const struct keyspan_device_details *d_details; + struct urb *this_urb; + int err; + u8 prescaler; + + s_priv = usb_get_serial_data(serial); + p_priv = usb_get_serial_port_data(port); + d_details = s_priv->device_details; + + /* only do something if we have a bulk out endpoint */ + this_urb = p_priv->outcont_urb; + if (this_urb == NULL) { + dev_dbg(&port->dev, "%s - oops no urb.\n", __func__); + return -1; + } + + /* Save reset port val for resend. + Don't overwrite resend for open/close condition. */ + if ((reset_port + 1) > p_priv->resend_cont) + p_priv->resend_cont = reset_port + 1; + if (this_urb->status == -EINPROGRESS) { + dev_dbg(&port->dev, "%s already writing\n", __func__); + mdelay(5); + return -1; + } + + memset(&msg, 0, sizeof(struct keyspan_usa90_portControlMessage)); + + /* Only set baud rate if it's changed */ + if (p_priv->old_baud != p_priv->baud) { + p_priv->old_baud = p_priv->baud; + msg.setClocking = 0x01; + if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, + &msg.baudHi, &msg.baudLo, &prescaler, 0) == KEYSPAN_INVALID_BAUD_RATE) { + dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n", + __func__, p_priv->baud); + p_priv->baud = 9600; + d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, + &msg.baudHi, &msg.baudLo, &prescaler, 0); + } + msg.setRxMode = 1; + msg.setTxMode = 1; + } + + /* modes must always be correctly specified */ + if (p_priv->baud > 57600) { + msg.rxMode = RXMODE_DMA; + msg.txMode = TXMODE_DMA; + } else { + msg.rxMode = RXMODE_BYHAND; + msg.txMode = TXMODE_BYHAND; + } + + msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1; + switch (p_priv->cflag & CSIZE) { + case CS5: + msg.lcr |= USA_DATABITS_5; + break; + case CS6: + msg.lcr |= USA_DATABITS_6; + break; + case CS7: + msg.lcr |= USA_DATABITS_7; + break; + case CS8: + msg.lcr |= USA_DATABITS_8; + break; + } + if (p_priv->cflag & PARENB) { + /* note USA_PARITY_NONE == 0 */ + msg.lcr |= (p_priv->cflag & PARODD) ? + USA_PARITY_ODD : USA_PARITY_EVEN; + } + if (p_priv->old_cflag != p_priv->cflag) { + p_priv->old_cflag = p_priv->cflag; + msg.setLcr = 0x01; + } + + if (p_priv->flow_control == flow_cts) + msg.txFlowControl = TXFLOW_CTS; + msg.setTxFlowControl = 0x01; + msg.setRxFlowControl = 0x01; + + msg.rxForwardingLength = 16; + msg.rxForwardingTimeout = 16; + msg.txAckSetting = 0; + msg.xonChar = 17; + msg.xoffChar = 19; + + /* Opening port */ + if (reset_port == 1) { + msg.portEnabled = 1; + msg.rxFlush = 1; + msg.txBreak = (p_priv->break_on); + } + /* Closing port */ + else if (reset_port == 2) + msg.portEnabled = 0; + /* Sending intermediate configs */ + else { + msg.portEnabled = 1; + msg.txBreak = (p_priv->break_on); + } + + /* Do handshaking outputs */ + msg.setRts = 0x01; + msg.rts = p_priv->rts_state; + + msg.setDtr = 0x01; + msg.dtr = p_priv->dtr_state; + + p_priv->resend_cont = 0; + memcpy(this_urb->transfer_buffer, &msg, sizeof(msg)); + + /* send the data out the device on control endpoint */ + this_urb->transfer_buffer_length = sizeof(msg); + + err = usb_submit_urb(this_urb, GFP_ATOMIC); + if (err != 0) + dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); + return 0; +} + +static int keyspan_usa67_send_setup(struct usb_serial *serial, + struct usb_serial_port *port, + int reset_port) +{ + struct keyspan_usa67_portControlMessage msg; + struct keyspan_serial_private *s_priv; + struct keyspan_port_private *p_priv; + const struct keyspan_device_details *d_details; + struct urb *this_urb; + int err, device_port; + + s_priv = usb_get_serial_data(serial); + p_priv = usb_get_serial_port_data(port); + d_details = s_priv->device_details; + + this_urb = s_priv->glocont_urb; + + /* Work out which port within the device is being setup */ + device_port = port->port_number; + + /* Make sure we have an urb then send the message */ + if (this_urb == NULL) { + dev_dbg(&port->dev, "%s - oops no urb for port.\n", __func__); + return -1; + } + + /* Save reset port val for resend. + Don't overwrite resend for open/close condition. */ + if ((reset_port + 1) > p_priv->resend_cont) + p_priv->resend_cont = reset_port + 1; + if (this_urb->status == -EINPROGRESS) { + /* dev_dbg(&port->dev, "%s - already writing\n", __func__); */ + mdelay(5); + return -1; + } + + memset(&msg, 0, sizeof(struct keyspan_usa67_portControlMessage)); + + msg.port = device_port; + + /* Only set baud rate if it's changed */ + if (p_priv->old_baud != p_priv->baud) { + p_priv->old_baud = p_priv->baud; + msg.setClocking = 0xff; + if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, + &msg.baudHi, &msg.baudLo, &msg.prescaler, + device_port) == KEYSPAN_INVALID_BAUD_RATE) { + dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n", + __func__, p_priv->baud); + msg.baudLo = 0; + msg.baudHi = 125; /* Values for 9600 baud */ + msg.prescaler = 10; + } + msg.setPrescaler = 0xff; + } + + msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1; + switch (p_priv->cflag & CSIZE) { + case CS5: + msg.lcr |= USA_DATABITS_5; + break; + case CS6: + msg.lcr |= USA_DATABITS_6; + break; + case CS7: + msg.lcr |= USA_DATABITS_7; + break; + case CS8: + msg.lcr |= USA_DATABITS_8; + break; + } + if (p_priv->cflag & PARENB) { + /* note USA_PARITY_NONE == 0 */ + msg.lcr |= (p_priv->cflag & PARODD) ? + USA_PARITY_ODD : USA_PARITY_EVEN; + } + msg.setLcr = 0xff; + + msg.ctsFlowControl = (p_priv->flow_control == flow_cts); + msg.xonFlowControl = 0; + msg.setFlowControl = 0xff; + msg.forwardingLength = 16; + msg.xonChar = 17; + msg.xoffChar = 19; + + if (reset_port == 1) { + /* Opening port */ + msg._txOn = 1; + msg._txOff = 0; + msg.txFlush = 0; + msg.txBreak = 0; + msg.rxOn = 1; + msg.rxOff = 0; + msg.rxFlush = 1; + msg.rxForward = 0; + msg.returnStatus = 0; + msg.resetDataToggle = 0xff; + } else if (reset_port == 2) { + /* Closing port */ + msg._txOn = 0; + msg._txOff = 1; + msg.txFlush = 0; + msg.txBreak = 0; + msg.rxOn = 0; + msg.rxOff = 1; + msg.rxFlush = 1; + msg.rxForward = 0; + msg.returnStatus = 0; + msg.resetDataToggle = 0; + } else { + /* Sending intermediate configs */ + msg._txOn = (!p_priv->break_on); + msg._txOff = 0; + msg.txFlush = 0; + msg.txBreak = (p_priv->break_on); + msg.rxOn = 0; + msg.rxOff = 0; + msg.rxFlush = 0; + msg.rxForward = 0; + msg.returnStatus = 0; + msg.resetDataToggle = 0x0; + } + + /* Do handshaking outputs */ + msg.setTxTriState_setRts = 0xff; + msg.txTriState_rts = p_priv->rts_state; + + msg.setHskoa_setDtr = 0xff; + msg.hskoa_dtr = p_priv->dtr_state; + + p_priv->resend_cont = 0; + + memcpy(this_urb->transfer_buffer, &msg, sizeof(msg)); + + /* send the data out the device on control endpoint */ + this_urb->transfer_buffer_length = sizeof(msg); + + err = usb_submit_urb(this_urb, GFP_ATOMIC); + if (err != 0) + dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); + return 0; +} + +static void keyspan_send_setup(struct usb_serial_port *port, int reset_port) +{ + struct usb_serial *serial = port->serial; + struct keyspan_serial_private *s_priv; + const struct keyspan_device_details *d_details; + + s_priv = usb_get_serial_data(serial); + d_details = s_priv->device_details; + + switch (d_details->msg_format) { + case msg_usa26: + keyspan_usa26_send_setup(serial, port, reset_port); + break; + case msg_usa28: + keyspan_usa28_send_setup(serial, port, reset_port); + break; + case msg_usa49: + keyspan_usa49_send_setup(serial, port, reset_port); + break; + case msg_usa90: + keyspan_usa90_send_setup(serial, port, reset_port); + break; + case msg_usa67: + keyspan_usa67_send_setup(serial, port, reset_port); + break; + } +} + + +/* Gets called by the "real" driver (ie once firmware is loaded + and renumeration has taken place. */ +static int keyspan_startup(struct usb_serial *serial) +{ + int i, err; + struct keyspan_serial_private *s_priv; + const struct keyspan_device_details *d_details; + + for (i = 0; (d_details = keyspan_devices[i]) != NULL; ++i) + if (d_details->product_id == + le16_to_cpu(serial->dev->descriptor.idProduct)) + break; + if (d_details == NULL) { + dev_err(&serial->dev->dev, "%s - unknown product id %x\n", + __func__, le16_to_cpu(serial->dev->descriptor.idProduct)); + return -ENODEV; + } + + /* Setup private data for serial driver */ + s_priv = kzalloc(sizeof(struct keyspan_serial_private), GFP_KERNEL); + if (!s_priv) + return -ENOMEM; + + s_priv->instat_buf = kzalloc(INSTAT_BUFLEN, GFP_KERNEL); + if (!s_priv->instat_buf) + goto err_instat_buf; + + s_priv->indat_buf = kzalloc(INDAT49W_BUFLEN, GFP_KERNEL); + if (!s_priv->indat_buf) + goto err_indat_buf; + + s_priv->glocont_buf = kzalloc(GLOCONT_BUFLEN, GFP_KERNEL); + if (!s_priv->glocont_buf) + goto err_glocont_buf; + + s_priv->ctrl_buf = kzalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL); + if (!s_priv->ctrl_buf) + goto err_ctrl_buf; + + s_priv->device_details = d_details; + usb_set_serial_data(serial, s_priv); + + keyspan_setup_urbs(serial); + + if (s_priv->instat_urb != NULL) { + err = usb_submit_urb(s_priv->instat_urb, GFP_KERNEL); + if (err != 0) + dev_dbg(&serial->dev->dev, "%s - submit instat urb failed %d\n", __func__, err); + } + if (s_priv->indat_urb != NULL) { + err = usb_submit_urb(s_priv->indat_urb, GFP_KERNEL); + if (err != 0) + dev_dbg(&serial->dev->dev, "%s - submit indat urb failed %d\n", __func__, err); + } + + return 0; + +err_ctrl_buf: + kfree(s_priv->glocont_buf); +err_glocont_buf: + kfree(s_priv->indat_buf); +err_indat_buf: + kfree(s_priv->instat_buf); +err_instat_buf: + kfree(s_priv); + + return -ENOMEM; +} + +static void keyspan_disconnect(struct usb_serial *serial) +{ + struct keyspan_serial_private *s_priv; + + s_priv = usb_get_serial_data(serial); + + usb_kill_urb(s_priv->instat_urb); + usb_kill_urb(s_priv->glocont_urb); + usb_kill_urb(s_priv->indat_urb); +} + +static void keyspan_release(struct usb_serial *serial) +{ + struct keyspan_serial_private *s_priv; + + s_priv = usb_get_serial_data(serial); + + /* Make sure to unlink the URBs submitted in attach. */ + usb_kill_urb(s_priv->instat_urb); + usb_kill_urb(s_priv->indat_urb); + + usb_free_urb(s_priv->instat_urb); + usb_free_urb(s_priv->indat_urb); + usb_free_urb(s_priv->glocont_urb); + + kfree(s_priv->ctrl_buf); + kfree(s_priv->glocont_buf); + kfree(s_priv->indat_buf); + kfree(s_priv->instat_buf); + + kfree(s_priv); +} + +static int keyspan_port_probe(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct keyspan_serial_private *s_priv; + struct keyspan_port_private *p_priv; + const struct keyspan_device_details *d_details; + struct callbacks *cback; + int endp; + int port_num; + int i; + + s_priv = usb_get_serial_data(serial); + d_details = s_priv->device_details; + + p_priv = kzalloc(sizeof(*p_priv), GFP_KERNEL); + if (!p_priv) + return -ENOMEM; + + for (i = 0; i < ARRAY_SIZE(p_priv->in_buffer); ++i) { + p_priv->in_buffer[i] = kzalloc(IN_BUFLEN, GFP_KERNEL); + if (!p_priv->in_buffer[i]) + goto err_free_in_buffer; + } + + for (i = 0; i < ARRAY_SIZE(p_priv->out_buffer); ++i) { + p_priv->out_buffer[i] = kzalloc(OUT_BUFLEN, GFP_KERNEL); + if (!p_priv->out_buffer[i]) + goto err_free_out_buffer; + } + + p_priv->inack_buffer = kzalloc(INACK_BUFLEN, GFP_KERNEL); + if (!p_priv->inack_buffer) + goto err_free_out_buffer; + + p_priv->outcont_buffer = kzalloc(OUTCONT_BUFLEN, GFP_KERNEL); + if (!p_priv->outcont_buffer) + goto err_free_inack_buffer; + + p_priv->device_details = d_details; + + /* Setup values for the various callback routines */ + cback = &keyspan_callbacks[d_details->msg_format]; + + port_num = port->port_number; + + /* Do indat endpoints first, once for each flip */ + endp = d_details->indat_endpoints[port_num]; + for (i = 0; i <= d_details->indat_endp_flip; ++i, ++endp) { + p_priv->in_urbs[i] = keyspan_setup_urb(serial, endp, + USB_DIR_IN, port, + p_priv->in_buffer[i], + IN_BUFLEN, + cback->indat_callback); + } + /* outdat endpoints also have flip */ + endp = d_details->outdat_endpoints[port_num]; + for (i = 0; i <= d_details->outdat_endp_flip; ++i, ++endp) { + p_priv->out_urbs[i] = keyspan_setup_urb(serial, endp, + USB_DIR_OUT, port, + p_priv->out_buffer[i], + OUT_BUFLEN, + cback->outdat_callback); + } + /* inack endpoint */ + p_priv->inack_urb = keyspan_setup_urb(serial, + d_details->inack_endpoints[port_num], + USB_DIR_IN, port, + p_priv->inack_buffer, + INACK_BUFLEN, + cback->inack_callback); + /* outcont endpoint */ + p_priv->outcont_urb = keyspan_setup_urb(serial, + d_details->outcont_endpoints[port_num], + USB_DIR_OUT, port, + p_priv->outcont_buffer, + OUTCONT_BUFLEN, + cback->outcont_callback); + + usb_set_serial_port_data(port, p_priv); + + return 0; + +err_free_inack_buffer: + kfree(p_priv->inack_buffer); +err_free_out_buffer: + for (i = 0; i < ARRAY_SIZE(p_priv->out_buffer); ++i) + kfree(p_priv->out_buffer[i]); +err_free_in_buffer: + for (i = 0; i < ARRAY_SIZE(p_priv->in_buffer); ++i) + kfree(p_priv->in_buffer[i]); + kfree(p_priv); + + return -ENOMEM; +} + +static void keyspan_port_remove(struct usb_serial_port *port) +{ + struct keyspan_port_private *p_priv; + int i; + + p_priv = usb_get_serial_port_data(port); + + usb_kill_urb(p_priv->inack_urb); + usb_kill_urb(p_priv->outcont_urb); + for (i = 0; i < 2; i++) { + usb_kill_urb(p_priv->in_urbs[i]); + usb_kill_urb(p_priv->out_urbs[i]); + } + + usb_free_urb(p_priv->inack_urb); + usb_free_urb(p_priv->outcont_urb); + for (i = 0; i < 2; i++) { + usb_free_urb(p_priv->in_urbs[i]); + usb_free_urb(p_priv->out_urbs[i]); + } + + kfree(p_priv->outcont_buffer); + kfree(p_priv->inack_buffer); + for (i = 0; i < ARRAY_SIZE(p_priv->out_buffer); ++i) + kfree(p_priv->out_buffer[i]); + for (i = 0; i < ARRAY_SIZE(p_priv->in_buffer); ++i) + kfree(p_priv->in_buffer[i]); + + kfree(p_priv); +} + +/* Structs for the devices, pre and post renumeration. */ +static struct usb_serial_driver keyspan_pre_device = { + .driver = { + .owner = THIS_MODULE, + .name = "keyspan_no_firm", + }, + .description = "Keyspan - (without firmware)", + .id_table = keyspan_pre_ids, + .num_ports = 1, + .attach = keyspan_fake_startup, +}; + +static struct usb_serial_driver keyspan_1port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "keyspan_1", + }, + .description = "Keyspan 1 port adapter", + .id_table = keyspan_1port_ids, + .num_ports = 1, + .open = keyspan_open, + .close = keyspan_close, + .dtr_rts = keyspan_dtr_rts, + .write = keyspan_write, + .write_room = keyspan_write_room, + .set_termios = keyspan_set_termios, + .break_ctl = keyspan_break_ctl, + .tiocmget = keyspan_tiocmget, + .tiocmset = keyspan_tiocmset, + .attach = keyspan_startup, + .disconnect = keyspan_disconnect, + .release = keyspan_release, + .port_probe = keyspan_port_probe, + .port_remove = keyspan_port_remove, +}; + +static struct usb_serial_driver keyspan_2port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "keyspan_2", + }, + .description = "Keyspan 2 port adapter", + .id_table = keyspan_2port_ids, + .num_ports = 2, + .open = keyspan_open, + .close = keyspan_close, + .dtr_rts = keyspan_dtr_rts, + .write = keyspan_write, + .write_room = keyspan_write_room, + .set_termios = keyspan_set_termios, + .break_ctl = keyspan_break_ctl, + .tiocmget = keyspan_tiocmget, + .tiocmset = keyspan_tiocmset, + .attach = keyspan_startup, + .disconnect = keyspan_disconnect, + .release = keyspan_release, + .port_probe = keyspan_port_probe, + .port_remove = keyspan_port_remove, +}; + +static struct usb_serial_driver keyspan_4port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "keyspan_4", + }, + .description = "Keyspan 4 port adapter", + .id_table = keyspan_4port_ids, + .num_ports = 4, + .open = keyspan_open, + .close = keyspan_close, + .dtr_rts = keyspan_dtr_rts, + .write = keyspan_write, + .write_room = keyspan_write_room, + .set_termios = keyspan_set_termios, + .break_ctl = keyspan_break_ctl, + .tiocmget = keyspan_tiocmget, + .tiocmset = keyspan_tiocmset, + .attach = keyspan_startup, + .disconnect = keyspan_disconnect, + .release = keyspan_release, + .port_probe = keyspan_port_probe, + .port_remove = keyspan_port_remove, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &keyspan_pre_device, &keyspan_1port_device, + &keyspan_2port_device, &keyspan_4port_device, NULL +}; + +module_usb_serial_driver(serial_drivers, keyspan_ids_combined); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +MODULE_FIRMWARE("keyspan/usa28.fw"); +MODULE_FIRMWARE("keyspan/usa28x.fw"); +MODULE_FIRMWARE("keyspan/usa28xa.fw"); +MODULE_FIRMWARE("keyspan/usa28xb.fw"); +MODULE_FIRMWARE("keyspan/usa19.fw"); +MODULE_FIRMWARE("keyspan/usa19qi.fw"); +MODULE_FIRMWARE("keyspan/mpr.fw"); +MODULE_FIRMWARE("keyspan/usa19qw.fw"); +MODULE_FIRMWARE("keyspan/usa18x.fw"); +MODULE_FIRMWARE("keyspan/usa19w.fw"); +MODULE_FIRMWARE("keyspan/usa49w.fw"); +MODULE_FIRMWARE("keyspan/usa49wlc.fw"); |