diff options
Diffstat (limited to 'drivers/usb/storage/uas-detect.h')
| -rw-r--r-- | drivers/usb/storage/uas-detect.h | 162 |
1 files changed, 162 insertions, 0 deletions
diff --git a/drivers/usb/storage/uas-detect.h b/drivers/usb/storage/uas-detect.h new file mode 100644 index 0000000000..d73282c0ec --- /dev/null +++ b/drivers/usb/storage/uas-detect.h @@ -0,0 +1,162 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#include <linux/usb.h> +#include <linux/usb/hcd.h> +#include "usb.h" + +static int uas_is_interface(struct usb_host_interface *intf) +{ + return (intf->desc.bInterfaceClass == USB_CLASS_MASS_STORAGE && + intf->desc.bInterfaceSubClass == USB_SC_SCSI && + intf->desc.bInterfaceProtocol == USB_PR_UAS); +} + +static struct usb_host_interface *uas_find_uas_alt_setting( + struct usb_interface *intf) +{ + int i; + + for (i = 0; i < intf->num_altsetting; i++) { + struct usb_host_interface *alt = &intf->altsetting[i]; + + if (uas_is_interface(alt)) + return alt; + } + + return NULL; +} + +static int uas_find_endpoints(struct usb_host_interface *alt, + struct usb_host_endpoint *eps[]) +{ + struct usb_host_endpoint *endpoint = alt->endpoint; + unsigned i, n_endpoints = alt->desc.bNumEndpoints; + + for (i = 0; i < n_endpoints; i++) { + unsigned char *extra = endpoint[i].extra; + int len = endpoint[i].extralen; + while (len >= 3) { + if (extra[1] == USB_DT_PIPE_USAGE) { + unsigned pipe_id = extra[2]; + if (pipe_id > 0 && pipe_id < 5) + eps[pipe_id - 1] = &endpoint[i]; + break; + } + len -= extra[0]; + extra += extra[0]; + } + } + + if (!eps[0] || !eps[1] || !eps[2] || !eps[3]) + return -ENODEV; + + return 0; +} + +static int uas_use_uas_driver(struct usb_interface *intf, + const struct usb_device_id *id, + unsigned long *flags_ret) +{ + struct usb_host_endpoint *eps[4] = { }; + struct usb_device *udev = interface_to_usbdev(intf); + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + unsigned long flags = id->driver_info; + struct usb_host_interface *alt; + int r; + + alt = uas_find_uas_alt_setting(intf); + if (!alt) + return 0; + + r = uas_find_endpoints(alt, eps); + if (r < 0) + return 0; + + /* + * ASMedia has a number of usb3 to sata bridge chips, at the time of + * this writing the following versions exist: + * ASM1051 - no uas support version + * ASM1051 - with broken (*) uas support + * ASM1053 - with working uas support, but problems with large xfers + * ASM1153 - with working uas support + * + * Devices with these chips re-use a number of device-ids over the + * entire line, so the device-id is useless to determine if we're + * dealing with an ASM1051 (which we want to avoid). + * + * The ASM1153 can be identified by config.MaxPower == 0, + * where as the ASM105x models have config.MaxPower == 36. + * + * Differentiating between the ASM1053 and ASM1051 is trickier, when + * connected over USB-3 we can look at the number of streams supported, + * ASM1051 supports 32 streams, where as early ASM1053 versions support + * 16 streams, newer ASM1053-s also support 32 streams, but have a + * different prod-id. + * + * (*) ASM1051 chips do work with UAS with some disks (with the + * US_FL_NO_REPORT_OPCODES quirk), but are broken with other disks + */ + if (le16_to_cpu(udev->descriptor.idVendor) == 0x174c && + (le16_to_cpu(udev->descriptor.idProduct) == 0x5106 || + le16_to_cpu(udev->descriptor.idProduct) == 0x55aa)) { + if (udev->actconfig->desc.bMaxPower == 0) { + /* ASM1153, do nothing */ + } else if (udev->speed < USB_SPEED_SUPER) { + /* No streams info, assume ASM1051 */ + flags |= US_FL_IGNORE_UAS; + } else if (usb_ss_max_streams(&eps[1]->ss_ep_comp) == 32) { + /* Possibly an ASM1051, disable uas */ + flags |= US_FL_IGNORE_UAS; + } else { + /* ASM1053, these have issues with large transfers */ + flags |= US_FL_MAX_SECTORS_240; + } + } + + /* All Seagate disk enclosures have broken ATA pass-through support */ + if (le16_to_cpu(udev->descriptor.idVendor) == 0x0bc2) + flags |= US_FL_NO_ATA_1X; + + /* + * RTL9210-based enclosure from HIKSEMI, MD202 reportedly have issues + * with UAS. This isn't distinguishable with just idVendor and + * idProduct, use manufacturer and product too. + * + * Reported-by: Hongling Zeng <zenghongling@kylinos.cn> + */ + if (le16_to_cpu(udev->descriptor.idVendor) == 0x0bda && + le16_to_cpu(udev->descriptor.idProduct) == 0x9210 && + (udev->manufacturer && !strcmp(udev->manufacturer, "HIKSEMI")) && + (udev->product && !strcmp(udev->product, "MD202"))) + flags |= US_FL_IGNORE_UAS; + + usb_stor_adjust_quirks(udev, &flags); + + if (flags & US_FL_IGNORE_UAS) { + dev_warn(&udev->dev, + "UAS is ignored for this device, using usb-storage instead\n"); + return 0; + } + + if (udev->bus->sg_tablesize == 0) { + dev_warn(&udev->dev, + "The driver for the USB controller %s does not support scatter-gather which is\n", + hcd->driver->description); + dev_warn(&udev->dev, + "required by the UAS driver. Please try an other USB controller if you wish to use UAS.\n"); + return 0; + } + + if (udev->speed >= USB_SPEED_SUPER && !hcd->can_do_streams) { + dev_warn(&udev->dev, + "USB controller %s does not support streams, which are required by the UAS driver.\n", + hcd_to_bus(hcd)->bus_name); + dev_warn(&udev->dev, + "Please try an other USB controller if you wish to use UAS.\n"); + return 0; + } + + if (flags_ret) + *flags_ret = flags; + + return 1; +} |