diff options
Diffstat (limited to 'drivers/video/backlight')
60 files changed, 20526 insertions, 0 deletions
diff --git a/drivers/video/backlight/88pm860x_bl.c b/drivers/video/backlight/88pm860x_bl.c new file mode 100644 index 0000000000..25e409bbb1 --- /dev/null +++ b/drivers/video/backlight/88pm860x_bl.c @@ -0,0 +1,261 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Backlight driver for Marvell Semiconductor 88PM8606 + * + * Copyright (C) 2009 Marvell International Ltd. + * Haojian Zhuang <haojian.zhuang@marvell.com> + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/fb.h> +#include <linux/i2c.h> +#include <linux/backlight.h> +#include <linux/mfd/88pm860x.h> +#include <linux/module.h> + +#define MAX_BRIGHTNESS (0xFF) +#define MIN_BRIGHTNESS (0) + +#define CURRENT_BITMASK (0x1F << 1) + +struct pm860x_backlight_data { + struct pm860x_chip *chip; + struct i2c_client *i2c; + int current_brightness; + int port; + int pwm; + int iset; + int reg_duty_cycle; + int reg_always_on; + int reg_current; +}; + +static int backlight_power_set(struct pm860x_chip *chip, int port, + int on) +{ + int ret = -EINVAL; + + switch (port) { + case 0: + ret = on ? pm8606_osc_enable(chip, WLED1_DUTY) : + pm8606_osc_disable(chip, WLED1_DUTY); + break; + case 1: + ret = on ? pm8606_osc_enable(chip, WLED2_DUTY) : + pm8606_osc_disable(chip, WLED2_DUTY); + break; + case 2: + ret = on ? pm8606_osc_enable(chip, WLED3_DUTY) : + pm8606_osc_disable(chip, WLED3_DUTY); + break; + } + return ret; +} + +static int pm860x_backlight_set(struct backlight_device *bl, int brightness) +{ + struct pm860x_backlight_data *data = bl_get_data(bl); + struct pm860x_chip *chip = data->chip; + unsigned char value; + int ret; + + if (brightness > MAX_BRIGHTNESS) + value = MAX_BRIGHTNESS; + else + value = brightness; + + if (brightness) + backlight_power_set(chip, data->port, 1); + + ret = pm860x_reg_write(data->i2c, data->reg_duty_cycle, value); + if (ret < 0) + goto out; + + if ((data->current_brightness == 0) && brightness) { + if (data->iset) { + ret = pm860x_set_bits(data->i2c, data->reg_current, + CURRENT_BITMASK, data->iset); + if (ret < 0) + goto out; + } + if (data->pwm) { + ret = pm860x_set_bits(data->i2c, PM8606_PWM, + PM8606_PWM_FREQ_MASK, data->pwm); + if (ret < 0) + goto out; + } + if (brightness == MAX_BRIGHTNESS) { + /* set WLED_ON bit as 100% */ + ret = pm860x_set_bits(data->i2c, data->reg_always_on, + PM8606_WLED_ON, PM8606_WLED_ON); + } + } else { + if (brightness == MAX_BRIGHTNESS) { + /* set WLED_ON bit as 100% */ + ret = pm860x_set_bits(data->i2c, data->reg_always_on, + PM8606_WLED_ON, PM8606_WLED_ON); + } else { + /* clear WLED_ON bit since it's not 100% */ + ret = pm860x_set_bits(data->i2c, data->reg_always_on, + PM8606_WLED_ON, 0); + } + } + if (ret < 0) + goto out; + + if (brightness == 0) + backlight_power_set(chip, data->port, 0); + + dev_dbg(chip->dev, "set brightness %d\n", value); + data->current_brightness = value; + return 0; +out: + dev_dbg(chip->dev, "set brightness %d failure with return value: %d\n", + value, ret); + return ret; +} + +static int pm860x_backlight_update_status(struct backlight_device *bl) +{ + return pm860x_backlight_set(bl, backlight_get_brightness(bl)); +} + +static int pm860x_backlight_get_brightness(struct backlight_device *bl) +{ + struct pm860x_backlight_data *data = bl_get_data(bl); + struct pm860x_chip *chip = data->chip; + int ret; + + ret = pm860x_reg_read(data->i2c, data->reg_duty_cycle); + if (ret < 0) + goto out; + data->current_brightness = ret; + dev_dbg(chip->dev, "get brightness %d\n", data->current_brightness); + return data->current_brightness; +out: + return -EINVAL; +} + +static const struct backlight_ops pm860x_backlight_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = pm860x_backlight_update_status, + .get_brightness = pm860x_backlight_get_brightness, +}; + +#ifdef CONFIG_OF +static int pm860x_backlight_dt_init(struct platform_device *pdev, + struct pm860x_backlight_data *data, + char *name) +{ + struct device_node *nproot, *np; + int iset = 0; + + nproot = of_get_child_by_name(pdev->dev.parent->of_node, "backlights"); + if (!nproot) { + dev_err(&pdev->dev, "failed to find backlights node\n"); + return -ENODEV; + } + for_each_child_of_node(nproot, np) { + if (of_node_name_eq(np, name)) { + of_property_read_u32(np, "marvell,88pm860x-iset", + &iset); + data->iset = PM8606_WLED_CURRENT(iset); + of_property_read_u32(np, "marvell,88pm860x-pwm", + &data->pwm); + of_node_put(np); + break; + } + } + of_node_put(nproot); + return 0; +} +#else +#define pm860x_backlight_dt_init(x, y, z) (-1) +#endif + +static int pm860x_backlight_probe(struct platform_device *pdev) +{ + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + struct pm860x_backlight_pdata *pdata = dev_get_platdata(&pdev->dev); + struct pm860x_backlight_data *data; + struct backlight_device *bl; + struct resource *res; + struct backlight_properties props; + char name[MFD_NAME_SIZE]; + int ret = 0; + + data = devm_kzalloc(&pdev->dev, sizeof(struct pm860x_backlight_data), + GFP_KERNEL); + if (data == NULL) + return -ENOMEM; + res = platform_get_resource_byname(pdev, IORESOURCE_REG, "duty cycle"); + if (!res) { + dev_err(&pdev->dev, "No REG resource for duty cycle\n"); + return -ENXIO; + } + data->reg_duty_cycle = res->start; + res = platform_get_resource_byname(pdev, IORESOURCE_REG, "always on"); + if (!res) { + dev_err(&pdev->dev, "No REG resource for always on\n"); + return -ENXIO; + } + data->reg_always_on = res->start; + res = platform_get_resource_byname(pdev, IORESOURCE_REG, "current"); + if (!res) { + dev_err(&pdev->dev, "No REG resource for current\n"); + return -ENXIO; + } + data->reg_current = res->start; + + memset(name, 0, MFD_NAME_SIZE); + sprintf(name, "backlight-%d", pdev->id); + data->port = pdev->id; + data->chip = chip; + data->i2c = (chip->id == CHIP_PM8606) ? chip->client : chip->companion; + data->current_brightness = MAX_BRIGHTNESS; + if (pm860x_backlight_dt_init(pdev, data, name)) { + if (pdata) { + data->pwm = pdata->pwm; + data->iset = pdata->iset; + } + } + + memset(&props, 0, sizeof(struct backlight_properties)); + props.type = BACKLIGHT_RAW; + props.max_brightness = MAX_BRIGHTNESS; + bl = devm_backlight_device_register(&pdev->dev, name, &pdev->dev, data, + &pm860x_backlight_ops, &props); + if (IS_ERR(bl)) { + dev_err(&pdev->dev, "failed to register backlight\n"); + return PTR_ERR(bl); + } + bl->props.brightness = MAX_BRIGHTNESS; + + platform_set_drvdata(pdev, bl); + + /* read current backlight */ + ret = pm860x_backlight_get_brightness(bl); + if (ret < 0) + return ret; + + backlight_update_status(bl); + return 0; +} + +static struct platform_driver pm860x_backlight_driver = { + .driver = { + .name = "88pm860x-backlight", + }, + .probe = pm860x_backlight_probe, +}; + +module_platform_driver(pm860x_backlight_driver); + +MODULE_DESCRIPTION("Backlight Driver for Marvell Semiconductor 88PM8606"); +MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:88pm860x-backlight"); diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig new file mode 100644 index 0000000000..51387b1ef0 --- /dev/null +++ b/drivers/video/backlight/Kconfig @@ -0,0 +1,477 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Backlight & LCD drivers configuration +# + +menu "Backlight & LCD device support" + +# +# LCD +# +config LCD_CLASS_DEVICE + tristate "Lowlevel LCD controls" + help + This framework adds support for low-level control of LCD. + Some framebuffer devices connect to platform-specific LCD modules + in order to have a platform-specific way to control the flat panel + (contrast and applying power to the LCD (not to the backlight!)). + + To have support for your specific LCD panel you will have to + select the proper drivers which depend on this option. + +if LCD_CLASS_DEVICE + +config LCD_CORGI + tristate "LCD Panel support for SHARP corgi/spitz model" + depends on SPI_MASTER && PXA_SHARPSL && BACKLIGHT_CLASS_DEVICE + help + Say y here to support the LCD panels usually found on SHARP + corgi (C7x0) and spitz (Cxx00) models. + +config LCD_L4F00242T03 + tristate "Epson L4F00242T03 LCD" + depends on SPI_MASTER + depends on GPIOLIB || COMPILE_TEST + help + SPI driver for Epson L4F00242T03. This provides basic support + for init and powering the LCD up/down through a sysfs interface. + +config LCD_LMS283GF05 + tristate "Samsung LMS283GF05 LCD" + depends on SPI_MASTER + depends on GPIOLIB || COMPILE_TEST + help + SPI driver for Samsung LMS283GF05. This provides basic support + for powering the LCD up/down through a sysfs interface. + +config LCD_LTV350QV + tristate "Samsung LTV350QV LCD Panel" + depends on SPI_MASTER + help + If you have a Samsung LTV350QV LCD panel, say y to include a + power control driver for it. The panel starts up in power + off state, so you need this driver in order to see any + output. + + The LTV350QV panel is present on all ATSTK1000 boards. + +config LCD_ILI922X + tristate "ILI Technology ILI9221/ILI9222 support" + depends on SPI + help + If you have a panel based on the ILI9221/9222 controller + chip then say y to include a driver for it. + +config LCD_ILI9320 + tristate "ILI Technology ILI9320 controller support" + depends on SPI + help + If you have a panel based on the ILI9320 controller chip + then say y to include a power driver for it. + +config LCD_TDO24M + tristate "Toppoly TDO24M and TDO35S LCD Panels support" + depends on SPI_MASTER + help + If you have a Toppoly TDO24M/TDO35S series LCD panel, say y here to + include the support for it. + +config LCD_VGG2432A4 + tristate "VGG2432A4 LCM device support" + depends on SPI_MASTER + select LCD_ILI9320 + help + If you have a VGG2432A4 panel based on the ILI9320 controller chip + then say y to include a power driver for it. + +config LCD_PLATFORM + tristate "Platform LCD controls" + help + This driver provides a platform-device registered LCD power + control interface. + +config LCD_HP700 + tristate "HP Jornada 700 series LCD Driver" + depends on SA1100_JORNADA720_SSP && !PREEMPTION + default y + help + If you have an HP Jornada 700 series handheld (710/720/728) + say Y to enable LCD control driver. + +config LCD_AMS369FG06 + tristate "AMS369FG06 AMOLED LCD Driver" + depends on SPI && BACKLIGHT_CLASS_DEVICE + default n + help + If you have an AMS369FG06 AMOLED Panel, say Y to enable its + LCD control driver. + +config LCD_LMS501KF03 + tristate "LMS501KF03 LCD Driver" + depends on SPI + default n + help + If you have an LMS501KF03 LCD Panel, say Y to enable its + LCD control driver. + +config LCD_HX8357 + tristate "Himax HX-8357 LCD Driver" + depends on SPI + help + If you have a HX-8357 LCD panel, say Y to enable its LCD control + driver. + +config LCD_OTM3225A + tristate "ORISE Technology OTM3225A support" + depends on SPI + help + If you have a panel based on the OTM3225A controller + chip then say y to include a driver for it. + +endif # LCD_CLASS_DEVICE + +# +# Backlight +# +config BACKLIGHT_CLASS_DEVICE + tristate "Lowlevel Backlight controls" + help + This framework adds support for low-level control of the LCD + backlight. This includes support for brightness and power. + + To have support for your specific LCD panel you will have to + select the proper drivers which depend on this option. + +if BACKLIGHT_CLASS_DEVICE + +config BACKLIGHT_ATMEL_LCDC + bool "Atmel LCDC Contrast-as-Backlight control" + depends on FB_ATMEL + help + This provides a backlight control internal to the Atmel LCDC + driver. If the LCD "contrast control" on your board is wired + so it controls the backlight brightness, select this option to + export this as a PWM-based backlight control. + + If in doubt, it's safe to enable this option; it doesn't kick + in unless the board's description says it's wired that way. + +config BACKLIGHT_EP93XX + tristate "Cirrus EP93xx Backlight Driver" + depends on FB_EP93XX + help + If you have a LCD backlight connected to the BRIGHT output of + the EP93xx, say Y here to enable this driver. + + To compile this driver as a module, choose M here: the module will + be called ep93xx_bl. + +config BACKLIGHT_IPAQ_MICRO + tristate "iPAQ microcontroller backlight driver" + depends on MFD_IPAQ_MICRO + default y + help + Say y to enable the backlight driver for Compaq iPAQ handheld + computers. Say yes if you have one of the h3100/h3600/h3700 + machines. + +config BACKLIGHT_KTD253 + tristate "Backlight Driver for Kinetic KTD253" + depends on GPIOLIB || COMPILE_TEST + help + Say y to enabled the backlight driver for the Kinetic KTD253 + which is a 1-wire GPIO-controlled backlight found in some mobile + phones. + +config BACKLIGHT_KTZ8866 + tristate "Backlight Driver for Kinetic KTZ8866" + depends on I2C + select REGMAP_I2C + help + Say Y to enable the backlight driver for the Kinetic KTZ8866 + found in Xiaomi Mi Pad 5 series. + +config BACKLIGHT_LM3533 + tristate "Backlight Driver for LM3533" + depends on MFD_LM3533 + help + Say Y to enable the backlight driver for National Semiconductor / TI + LM3533 Lighting Power chips. + + The backlights can be controlled directly, through PWM input, or by + the ambient-light-sensor interface. The chip supports 256 brightness + levels. + +config BACKLIGHT_LOCOMO + tristate "Sharp LOCOMO LCD/Backlight Driver" + depends on SHARP_LOCOMO + default y + help + If you have a Sharp Zaurus SL-5500 (Collie) or SL-5600 (Poodle) say y to + enable the LCD/backlight driver. + +config BACKLIGHT_OMAP1 + tristate "OMAP1 PWL-based LCD Backlight" + depends on ARCH_OMAP1 || COMPILE_TEST + default ARCH_OMAP1 + help + This driver controls the LCD backlight level and power for + the PWL module of OMAP1 processors. Say Y if your board + uses this hardware. + +config BACKLIGHT_HP680 + tristate "HP Jornada 680 Backlight Driver" + depends on SH_HP6XX + default y + help + If you have a HP Jornada 680, say y to enable the + backlight driver. + +config BACKLIGHT_HP700 + tristate "HP Jornada 700 series Backlight Driver" + depends on SA1100_JORNADA720_SSP && !PREEMPTION + default y + help + If you have an HP Jornada 700 series, + say Y to include backlight control driver. + +config BACKLIGHT_CARILLO_RANCH + tristate "Intel Carillo Ranch Backlight Driver" + depends on LCD_CLASS_DEVICE && PCI && X86 && FB_LE80578 + help + If you have a Intel LE80578 (Carillo Ranch) say Y to enable the + backlight driver. + +config BACKLIGHT_PWM + tristate "Generic PWM based Backlight Driver" + depends on PWM + help + If you have a LCD backlight adjustable by PWM, say Y to enable + this driver. + +config BACKLIGHT_DA903X + tristate "Backlight Driver for DA9030/DA9034 using WLED" + depends on PMIC_DA903X + help + If you have a LCD backlight connected to the WLED output of DA9030 + or DA9034 WLED output, say Y here to enable this driver. + +config BACKLIGHT_DA9052 + tristate "Dialog DA9052/DA9053 WLED" + depends on PMIC_DA9052 + help + Enable the Backlight Driver for DA9052-BC and DA9053-AA/Bx PMICs. + +config BACKLIGHT_MAX8925 + tristate "Backlight driver for MAX8925" + depends on MFD_MAX8925 + help + If you have a LCD backlight connected to the WLED output of MAX8925 + WLED output, say Y here to enable this driver. + +config BACKLIGHT_MT6370 + tristate "MediaTek MT6370 Backlight Driver" + depends on MFD_MT6370 + help + This enables support for Mediatek MT6370 Backlight driver. + It's commonly used to drive the display WLED. There are 4 channels + inside, and each channel supports up to 30mA of current capability + with 2048 current steps (only for MT6370/MT6371) or 16384 current + steps (only for MT6372) in exponential or linear mapping curves. + + This driver can also be built as a module. If so, the module + will be called "mt6370-backlight". + +config BACKLIGHT_APPLE + tristate "Apple Backlight Driver" + depends on X86 && ACPI + depends on ACPI_VIDEO=n || ACPI_VIDEO + help + If you have an Intel-based Apple say Y to enable a driver for its + backlight. + +config BACKLIGHT_QCOM_WLED + tristate "Qualcomm PMIC WLED Driver" + select REGMAP + help + If you have the Qualcomm PMIC, say Y to enable a driver for the + WLED block. Currently it supports PM8941 and PMI8998. + +config BACKLIGHT_RT4831 + tristate "Richtek RT4831 Backlight Driver" + depends on MFD_RT4831 + help + This enables support for Richtek RT4831 Backlight driver. + It's commonly used to drive the display WLED. There're four channels + inisde, and each channel can provide up to 30mA current. + +config BACKLIGHT_SAHARA + tristate "Tabletkiosk Sahara Touch-iT Backlight Driver" + depends on X86 + help + If you have a Tabletkiosk Sahara Touch-iT, say y to enable the + backlight driver. + +config BACKLIGHT_WM831X + tristate "WM831x PMIC Backlight Driver" + depends on MFD_WM831X + help + If you have a backlight driven by the ISINK and DCDC of a + WM831x PMIC say y to enable the backlight driver for it. + +config BACKLIGHT_ADP5520 + tristate "Backlight Driver for ADP5520/ADP5501 using WLED" + depends on PMIC_ADP5520 + help + If you have a LCD backlight connected to the BST/BL_SNK output of + ADP5520 or ADP5501, say Y here to enable this driver. + + To compile this driver as a module, choose M here: the module will + be called adp5520_bl. + +config BACKLIGHT_ADP8860 + tristate "Backlight Driver for ADP8860/ADP8861/ADP8863 using WLED" + depends on I2C + select NEW_LEDS + select LEDS_CLASS + help + If you have a LCD backlight connected to the ADP8860, ADP8861 or + ADP8863 say Y here to enable this driver. + + To compile this driver as a module, choose M here: the module will + be called adp8860_bl. + +config BACKLIGHT_ADP8870 + tristate "Backlight Driver for ADP8870 using WLED" + depends on I2C + select NEW_LEDS + select LEDS_CLASS + help + If you have a LCD backlight connected to the ADP8870, + say Y here to enable this driver. + + To compile this driver as a module, choose M here: the module will + be called adp8870_bl. + +config BACKLIGHT_88PM860X + tristate "Backlight Driver for 88PM8606 using WLED" + depends on MFD_88PM860X + help + Say Y to enable the backlight driver for Marvell 88PM8606. + +config BACKLIGHT_PCF50633 + tristate "Backlight driver for NXP PCF50633 MFD" + depends on MFD_PCF50633 + help + If you have a backlight driven by a NXP PCF50633 MFD, say Y here to + enable its driver. + +config BACKLIGHT_AAT2870 + tristate "AnalogicTech AAT2870 Backlight" + depends on MFD_AAT2870_CORE + help + If you have a AnalogicTech AAT2870 say Y to enable the + backlight driver. + +config BACKLIGHT_LM3630A + tristate "Backlight Driver for LM3630A" + depends on I2C && PWM + select REGMAP_I2C + help + This supports TI LM3630A Backlight Driver + +config BACKLIGHT_LM3639 + tristate "Backlight Driver for LM3639" + depends on I2C + select REGMAP_I2C + select NEW_LEDS + select LEDS_CLASS + help + This supports TI LM3639 Backlight + 1.5A Flash LED Driver + +config BACKLIGHT_LP855X + tristate "Backlight driver for TI LP855X" + depends on I2C && PWM + help + This supports TI LP8550, LP8551, LP8552, LP8553, LP8555, LP8556 and + LP8557 backlight driver. + +config BACKLIGHT_LP8788 + tristate "Backlight driver for TI LP8788 MFD" + depends on MFD_LP8788 && PWM + help + This supports TI LP8788 backlight driver. + +config BACKLIGHT_PANDORA + tristate "Backlight driver for Pandora console" + depends on TWL4030_CORE + help + If you have a Pandora console, say Y to enable the + backlight driver. + +config BACKLIGHT_SKY81452 + tristate "Backlight driver for SKY81452" + depends on MFD_SKY81452 + help + If you have a Skyworks SKY81452, say Y to enable the + backlight driver. + + To compile this driver as a module, choose M here: the module will + be called sky81452-backlight + +config BACKLIGHT_TPS65217 + tristate "TPS65217 Backlight" + depends on MFD_TPS65217 + help + If you have a Texas Instruments TPS65217 say Y to enable the + backlight driver. + +config BACKLIGHT_AS3711 + tristate "AS3711 Backlight" + depends on MFD_AS3711 + help + If you have an Austrian Microsystems AS3711 say Y to enable the + backlight driver. + +config BACKLIGHT_GPIO + tristate "Generic GPIO based Backlight Driver" + depends on GPIOLIB || COMPILE_TEST + help + If you have a LCD backlight adjustable by GPIO, say Y to enable + this driver. + +config BACKLIGHT_LV5207LP + tristate "Sanyo LV5207LP Backlight" + depends on I2C + help + If you have a Sanyo LV5207LP say Y to enable the backlight driver. + +config BACKLIGHT_BD6107 + tristate "Rohm BD6107 Backlight" + depends on I2C + help + If you have a Rohm BD6107 say Y to enable the backlight driver. + +config BACKLIGHT_ARCXCNN + tristate "Backlight driver for the Arctic Sands ARCxCnnnn family" + depends on I2C + help + If you have an ARCxCnnnn family backlight say Y to enable + the backlight driver. + +config BACKLIGHT_RAVE_SP + tristate "RAVE SP Backlight driver" + depends on RAVE_SP_CORE + help + Support for backlight control on RAVE SP device. + +config BACKLIGHT_LED + tristate "Generic LED based Backlight Driver" + depends on LEDS_CLASS && OF + help + If you have a LCD backlight adjustable by LED class driver, say Y + to enable this driver. + +endif # BACKLIGHT_CLASS_DEVICE + +endmenu diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile new file mode 100644 index 0000000000..f72e1c3c59 --- /dev/null +++ b/drivers/video/backlight/Makefile @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: GPL-2.0 +# Backlight & LCD drivers + +obj-$(CONFIG_LCD_AMS369FG06) += ams369fg06.o +obj-$(CONFIG_LCD_CLASS_DEVICE) += lcd.o +obj-$(CONFIG_LCD_CORGI) += corgi_lcd.o +obj-$(CONFIG_LCD_HP700) += jornada720_lcd.o +obj-$(CONFIG_LCD_HX8357) += hx8357.o +obj-$(CONFIG_LCD_ILI922X) += ili922x.o +obj-$(CONFIG_LCD_ILI9320) += ili9320.o +obj-$(CONFIG_LCD_L4F00242T03) += l4f00242t03.o +obj-$(CONFIG_LCD_LMS283GF05) += lms283gf05.o +obj-$(CONFIG_LCD_LMS501KF03) += lms501kf03.o +obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o +obj-$(CONFIG_LCD_OTM3225A) += otm3225a.o +obj-$(CONFIG_LCD_PLATFORM) += platform_lcd.o +obj-$(CONFIG_LCD_TDO24M) += tdo24m.o +obj-$(CONFIG_LCD_VGG2432A4) += vgg2432a4.o + +obj-$(CONFIG_BACKLIGHT_88PM860X) += 88pm860x_bl.o +obj-$(CONFIG_BACKLIGHT_AAT2870) += aat2870_bl.o +obj-$(CONFIG_BACKLIGHT_ADP5520) += adp5520_bl.o +obj-$(CONFIG_BACKLIGHT_ADP8860) += adp8860_bl.o +obj-$(CONFIG_BACKLIGHT_ADP8870) += adp8870_bl.o +obj-$(CONFIG_BACKLIGHT_APPLE) += apple_bl.o +obj-$(CONFIG_BACKLIGHT_AS3711) += as3711_bl.o +obj-$(CONFIG_BACKLIGHT_BD6107) += bd6107.o +obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o +obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o +obj-$(CONFIG_BACKLIGHT_DA903X) += da903x_bl.o +obj-$(CONFIG_BACKLIGHT_DA9052) += da9052_bl.o +obj-$(CONFIG_BACKLIGHT_EP93XX) += ep93xx_bl.o +obj-$(CONFIG_BACKLIGHT_GPIO) += gpio_backlight.o +obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o +obj-$(CONFIG_BACKLIGHT_HP700) += jornada720_bl.o +obj-$(CONFIG_BACKLIGHT_IPAQ_MICRO) += ipaq_micro_bl.o +obj-$(CONFIG_BACKLIGHT_KTD253) += ktd253-backlight.o +obj-$(CONFIG_BACKLIGHT_KTZ8866) += ktz8866.o +obj-$(CONFIG_BACKLIGHT_LM3533) += lm3533_bl.o +obj-$(CONFIG_BACKLIGHT_LM3630A) += lm3630a_bl.o +obj-$(CONFIG_BACKLIGHT_LM3639) += lm3639_bl.o +obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o +obj-$(CONFIG_BACKLIGHT_LP855X) += lp855x_bl.o +obj-$(CONFIG_BACKLIGHT_LP8788) += lp8788_bl.o +obj-$(CONFIG_BACKLIGHT_LV5207LP) += lv5207lp.o +obj-$(CONFIG_BACKLIGHT_MAX8925) += max8925_bl.o +obj-$(CONFIG_BACKLIGHT_MT6370) += mt6370-backlight.o +obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o +obj-$(CONFIG_BACKLIGHT_PANDORA) += pandora_bl.o +obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o +obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o +obj-$(CONFIG_BACKLIGHT_QCOM_WLED) += qcom-wled.o +obj-$(CONFIG_BACKLIGHT_RT4831) += rt4831-backlight.o +obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o +obj-$(CONFIG_BACKLIGHT_SKY81452) += sky81452-backlight.o +obj-$(CONFIG_BACKLIGHT_TPS65217) += tps65217_bl.o +obj-$(CONFIG_BACKLIGHT_WM831X) += wm831x_bl.o +obj-$(CONFIG_BACKLIGHT_ARCXCNN) += arcxcnn_bl.o +obj-$(CONFIG_BACKLIGHT_RAVE_SP) += rave-sp-backlight.o +obj-$(CONFIG_BACKLIGHT_LED) += led_bl.o diff --git a/drivers/video/backlight/aat2870_bl.c b/drivers/video/backlight/aat2870_bl.c new file mode 100644 index 0000000000..81fde3abb9 --- /dev/null +++ b/drivers/video/backlight/aat2870_bl.c @@ -0,0 +1,213 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * linux/drivers/video/backlight/aat2870_bl.c + * + * Copyright (c) 2011, NVIDIA Corporation. + * Author: Jin Park <jinyoungp@nvidia.com> + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mutex.h> +#include <linux/delay.h> +#include <linux/fb.h> +#include <linux/backlight.h> +#include <linux/mfd/aat2870.h> + +struct aat2870_bl_driver_data { + struct platform_device *pdev; + struct backlight_device *bd; + + int channels; + int max_current; + int brightness; /* current brightness */ +}; + +static inline int aat2870_brightness(struct aat2870_bl_driver_data *aat2870_bl, + int brightness) +{ + struct backlight_device *bd = aat2870_bl->bd; + int val; + + val = brightness * (aat2870_bl->max_current - 1); + val /= bd->props.max_brightness; + + return val; +} + +static inline int aat2870_bl_enable(struct aat2870_bl_driver_data *aat2870_bl) +{ + struct aat2870_data *aat2870 + = dev_get_drvdata(aat2870_bl->pdev->dev.parent); + + return aat2870->write(aat2870, AAT2870_BL_CH_EN, + (u8)aat2870_bl->channels); +} + +static inline int aat2870_bl_disable(struct aat2870_bl_driver_data *aat2870_bl) +{ + struct aat2870_data *aat2870 + = dev_get_drvdata(aat2870_bl->pdev->dev.parent); + + return aat2870->write(aat2870, AAT2870_BL_CH_EN, 0x0); +} + +static int aat2870_bl_update_status(struct backlight_device *bd) +{ + struct aat2870_bl_driver_data *aat2870_bl = bl_get_data(bd); + struct aat2870_data *aat2870 = + dev_get_drvdata(aat2870_bl->pdev->dev.parent); + int brightness = backlight_get_brightness(bd); + int ret; + + if ((brightness < 0) || (bd->props.max_brightness < brightness)) { + dev_err(&bd->dev, "invalid brightness, %d\n", brightness); + return -EINVAL; + } + + dev_dbg(&bd->dev, "brightness=%d, power=%d, state=%d\n", + bd->props.brightness, bd->props.power, bd->props.state); + + ret = aat2870->write(aat2870, AAT2870_BLM, + (u8)aat2870_brightness(aat2870_bl, brightness)); + if (ret < 0) + return ret; + + if (brightness == 0) { + ret = aat2870_bl_disable(aat2870_bl); + if (ret < 0) + return ret; + } else if (aat2870_bl->brightness == 0) { + ret = aat2870_bl_enable(aat2870_bl); + if (ret < 0) + return ret; + } + + aat2870_bl->brightness = brightness; + + return 0; +} + +static int aat2870_bl_check_fb(struct backlight_device *bd, struct fb_info *fi) +{ + return 1; +} + +static const struct backlight_ops aat2870_bl_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = aat2870_bl_update_status, + .check_fb = aat2870_bl_check_fb, +}; + +static int aat2870_bl_probe(struct platform_device *pdev) +{ + struct aat2870_bl_platform_data *pdata = dev_get_platdata(&pdev->dev); + struct aat2870_bl_driver_data *aat2870_bl; + struct backlight_device *bd; + struct backlight_properties props; + int ret = 0; + + if (!pdata) { + dev_err(&pdev->dev, "No platform data\n"); + ret = -ENXIO; + goto out; + } + + if (pdev->id != AAT2870_ID_BL) { + dev_err(&pdev->dev, "Invalid device ID, %d\n", pdev->id); + ret = -EINVAL; + goto out; + } + + aat2870_bl = devm_kzalloc(&pdev->dev, + sizeof(struct aat2870_bl_driver_data), + GFP_KERNEL); + if (!aat2870_bl) { + ret = -ENOMEM; + goto out; + } + + memset(&props, 0, sizeof(struct backlight_properties)); + + props.type = BACKLIGHT_RAW; + bd = devm_backlight_device_register(&pdev->dev, "aat2870-backlight", + &pdev->dev, aat2870_bl, &aat2870_bl_ops, + &props); + if (IS_ERR(bd)) { + dev_err(&pdev->dev, + "Failed allocate memory for backlight device\n"); + ret = PTR_ERR(bd); + goto out; + } + + aat2870_bl->pdev = pdev; + platform_set_drvdata(pdev, aat2870_bl); + + aat2870_bl->bd = bd; + + if (pdata->channels > 0) + aat2870_bl->channels = pdata->channels; + else + aat2870_bl->channels = AAT2870_BL_CH_ALL; + + if (pdata->max_current > 0) + aat2870_bl->max_current = pdata->max_current; + else + aat2870_bl->max_current = AAT2870_CURRENT_27_9; + + if (pdata->max_brightness > 0) + bd->props.max_brightness = pdata->max_brightness; + else + bd->props.max_brightness = 255; + + aat2870_bl->brightness = 0; + bd->props.power = FB_BLANK_UNBLANK; + bd->props.brightness = bd->props.max_brightness; + + ret = aat2870_bl_update_status(bd); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to initialize\n"); + return ret; + } + + return 0; + +out: + return ret; +} + +static void aat2870_bl_remove(struct platform_device *pdev) +{ + struct aat2870_bl_driver_data *aat2870_bl = platform_get_drvdata(pdev); + struct backlight_device *bd = aat2870_bl->bd; + + bd->props.power = FB_BLANK_POWERDOWN; + bd->props.brightness = 0; + backlight_update_status(bd); +} + +static struct platform_driver aat2870_bl_driver = { + .driver = { + .name = "aat2870-backlight", + }, + .probe = aat2870_bl_probe, + .remove_new = aat2870_bl_remove, +}; + +static int __init aat2870_bl_init(void) +{ + return platform_driver_register(&aat2870_bl_driver); +} +subsys_initcall(aat2870_bl_init); + +static void __exit aat2870_bl_exit(void) +{ + platform_driver_unregister(&aat2870_bl_driver); +} +module_exit(aat2870_bl_exit); + +MODULE_DESCRIPTION("AnalogicTech AAT2870 Backlight"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jin Park <jinyoungp@nvidia.com>"); diff --git a/drivers/video/backlight/adp5520_bl.c b/drivers/video/backlight/adp5520_bl.c new file mode 100644 index 0000000000..8e0e9cfe5f --- /dev/null +++ b/drivers/video/backlight/adp5520_bl.c @@ -0,0 +1,386 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Backlight driver for Analog Devices ADP5520/ADP5501 MFD PMICs + * + * Copyright 2009 Analog Devices Inc. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/fb.h> +#include <linux/backlight.h> +#include <linux/mfd/adp5520.h> +#include <linux/slab.h> +#include <linux/module.h> + +struct adp5520_bl { + struct device *master; + struct adp5520_backlight_platform_data *pdata; + struct mutex lock; + unsigned long cached_daylight_max; + int id; + int current_brightness; +}; + +static int adp5520_bl_set(struct backlight_device *bl, int brightness) +{ + struct adp5520_bl *data = bl_get_data(bl); + struct device *master = data->master; + int ret = 0; + + if (data->pdata->en_ambl_sens) { + if ((brightness > 0) && (brightness < ADP5020_MAX_BRIGHTNESS)) { + /* Disable Ambient Light auto adjust */ + ret |= adp5520_clr_bits(master, ADP5520_BL_CONTROL, + ADP5520_BL_AUTO_ADJ); + ret |= adp5520_write(master, ADP5520_DAYLIGHT_MAX, + brightness); + } else { + /* + * MAX_BRIGHTNESS -> Enable Ambient Light auto adjust + * restore daylight l3 sysfs brightness + */ + ret |= adp5520_write(master, ADP5520_DAYLIGHT_MAX, + data->cached_daylight_max); + ret |= adp5520_set_bits(master, ADP5520_BL_CONTROL, + ADP5520_BL_AUTO_ADJ); + } + } else { + ret |= adp5520_write(master, ADP5520_DAYLIGHT_MAX, brightness); + } + + if (data->current_brightness && brightness == 0) + ret |= adp5520_set_bits(master, + ADP5520_MODE_STATUS, ADP5520_DIM_EN); + else if (data->current_brightness == 0 && brightness) + ret |= adp5520_clr_bits(master, + ADP5520_MODE_STATUS, ADP5520_DIM_EN); + + if (!ret) + data->current_brightness = brightness; + + return ret; +} + +static int adp5520_bl_update_status(struct backlight_device *bl) +{ + return adp5520_bl_set(bl, backlight_get_brightness(bl)); +} + +static int adp5520_bl_get_brightness(struct backlight_device *bl) +{ + struct adp5520_bl *data = bl_get_data(bl); + int error; + uint8_t reg_val; + + error = adp5520_read(data->master, ADP5520_BL_VALUE, ®_val); + + return error ? data->current_brightness : reg_val; +} + +static const struct backlight_ops adp5520_bl_ops = { + .update_status = adp5520_bl_update_status, + .get_brightness = adp5520_bl_get_brightness, +}; + +static int adp5520_bl_setup(struct backlight_device *bl) +{ + struct adp5520_bl *data = bl_get_data(bl); + struct device *master = data->master; + struct adp5520_backlight_platform_data *pdata = data->pdata; + int ret = 0; + + ret |= adp5520_write(master, ADP5520_DAYLIGHT_MAX, + pdata->l1_daylight_max); + ret |= adp5520_write(master, ADP5520_DAYLIGHT_DIM, + pdata->l1_daylight_dim); + + if (pdata->en_ambl_sens) { + data->cached_daylight_max = pdata->l1_daylight_max; + ret |= adp5520_write(master, ADP5520_OFFICE_MAX, + pdata->l2_office_max); + ret |= adp5520_write(master, ADP5520_OFFICE_DIM, + pdata->l2_office_dim); + ret |= adp5520_write(master, ADP5520_DARK_MAX, + pdata->l3_dark_max); + ret |= adp5520_write(master, ADP5520_DARK_DIM, + pdata->l3_dark_dim); + ret |= adp5520_write(master, ADP5520_L2_TRIP, + pdata->l2_trip); + ret |= adp5520_write(master, ADP5520_L2_HYS, + pdata->l2_hyst); + ret |= adp5520_write(master, ADP5520_L3_TRIP, + pdata->l3_trip); + ret |= adp5520_write(master, ADP5520_L3_HYS, + pdata->l3_hyst); + ret |= adp5520_write(master, ADP5520_ALS_CMPR_CFG, + ALS_CMPR_CFG_VAL(pdata->abml_filt, + ADP5520_L3_EN)); + } + + ret |= adp5520_write(master, ADP5520_BL_CONTROL, + BL_CTRL_VAL(pdata->fade_led_law, + pdata->en_ambl_sens)); + + ret |= adp5520_write(master, ADP5520_BL_FADE, FADE_VAL(pdata->fade_in, + pdata->fade_out)); + + ret |= adp5520_set_bits(master, ADP5520_MODE_STATUS, + ADP5520_BL_EN | ADP5520_DIM_EN); + + return ret; +} + +static ssize_t adp5520_show(struct device *dev, char *buf, int reg) +{ + struct adp5520_bl *data = dev_get_drvdata(dev); + int ret; + uint8_t reg_val; + + mutex_lock(&data->lock); + ret = adp5520_read(data->master, reg, ®_val); + mutex_unlock(&data->lock); + + if (ret < 0) + return ret; + + return sprintf(buf, "%u\n", reg_val); +} + +static ssize_t adp5520_store(struct device *dev, const char *buf, + size_t count, int reg) +{ + struct adp5520_bl *data = dev_get_drvdata(dev); + unsigned long val; + int ret; + + ret = kstrtoul(buf, 10, &val); + if (ret) + return ret; + + mutex_lock(&data->lock); + adp5520_write(data->master, reg, val); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t adp5520_bl_dark_max_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp5520_show(dev, buf, ADP5520_DARK_MAX); +} + +static ssize_t adp5520_bl_dark_max_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return adp5520_store(dev, buf, count, ADP5520_DARK_MAX); +} +static DEVICE_ATTR(dark_max, 0664, adp5520_bl_dark_max_show, + adp5520_bl_dark_max_store); + +static ssize_t adp5520_bl_office_max_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp5520_show(dev, buf, ADP5520_OFFICE_MAX); +} + +static ssize_t adp5520_bl_office_max_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return adp5520_store(dev, buf, count, ADP5520_OFFICE_MAX); +} +static DEVICE_ATTR(office_max, 0664, adp5520_bl_office_max_show, + adp5520_bl_office_max_store); + +static ssize_t adp5520_bl_daylight_max_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp5520_show(dev, buf, ADP5520_DAYLIGHT_MAX); +} + +static ssize_t adp5520_bl_daylight_max_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct adp5520_bl *data = dev_get_drvdata(dev); + int ret; + + ret = kstrtoul(buf, 10, &data->cached_daylight_max); + if (ret < 0) + return ret; + + return adp5520_store(dev, buf, count, ADP5520_DAYLIGHT_MAX); +} +static DEVICE_ATTR(daylight_max, 0664, adp5520_bl_daylight_max_show, + adp5520_bl_daylight_max_store); + +static ssize_t adp5520_bl_dark_dim_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp5520_show(dev, buf, ADP5520_DARK_DIM); +} + +static ssize_t adp5520_bl_dark_dim_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return adp5520_store(dev, buf, count, ADP5520_DARK_DIM); +} +static DEVICE_ATTR(dark_dim, 0664, adp5520_bl_dark_dim_show, + adp5520_bl_dark_dim_store); + +static ssize_t adp5520_bl_office_dim_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp5520_show(dev, buf, ADP5520_OFFICE_DIM); +} + +static ssize_t adp5520_bl_office_dim_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return adp5520_store(dev, buf, count, ADP5520_OFFICE_DIM); +} +static DEVICE_ATTR(office_dim, 0664, adp5520_bl_office_dim_show, + adp5520_bl_office_dim_store); + +static ssize_t adp5520_bl_daylight_dim_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp5520_show(dev, buf, ADP5520_DAYLIGHT_DIM); +} + +static ssize_t adp5520_bl_daylight_dim_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return adp5520_store(dev, buf, count, ADP5520_DAYLIGHT_DIM); +} +static DEVICE_ATTR(daylight_dim, 0664, adp5520_bl_daylight_dim_show, + adp5520_bl_daylight_dim_store); + +static struct attribute *adp5520_bl_attributes[] = { + &dev_attr_dark_max.attr, + &dev_attr_dark_dim.attr, + &dev_attr_office_max.attr, + &dev_attr_office_dim.attr, + &dev_attr_daylight_max.attr, + &dev_attr_daylight_dim.attr, + NULL +}; + +static const struct attribute_group adp5520_bl_attr_group = { + .attrs = adp5520_bl_attributes, +}; + +static int adp5520_bl_probe(struct platform_device *pdev) +{ + struct backlight_properties props; + struct backlight_device *bl; + struct adp5520_bl *data; + int ret = 0; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (data == NULL) + return -ENOMEM; + + data->master = pdev->dev.parent; + data->pdata = dev_get_platdata(&pdev->dev); + + if (data->pdata == NULL) { + dev_err(&pdev->dev, "missing platform data\n"); + return -ENODEV; + } + + data->id = pdev->id; + data->current_brightness = 0; + + mutex_init(&data->lock); + + memset(&props, 0, sizeof(struct backlight_properties)); + props.type = BACKLIGHT_RAW; + props.max_brightness = ADP5020_MAX_BRIGHTNESS; + bl = devm_backlight_device_register(&pdev->dev, pdev->name, + data->master, data, &adp5520_bl_ops, + &props); + if (IS_ERR(bl)) { + dev_err(&pdev->dev, "failed to register backlight\n"); + return PTR_ERR(bl); + } + + bl->props.brightness = ADP5020_MAX_BRIGHTNESS; + if (data->pdata->en_ambl_sens) + ret = sysfs_create_group(&bl->dev.kobj, + &adp5520_bl_attr_group); + + if (ret) { + dev_err(&pdev->dev, "failed to register sysfs\n"); + return ret; + } + + platform_set_drvdata(pdev, bl); + ret = adp5520_bl_setup(bl); + if (ret) { + dev_err(&pdev->dev, "failed to setup\n"); + if (data->pdata->en_ambl_sens) + sysfs_remove_group(&bl->dev.kobj, + &adp5520_bl_attr_group); + return ret; + } + + backlight_update_status(bl); + + return 0; +} + +static void adp5520_bl_remove(struct platform_device *pdev) +{ + struct backlight_device *bl = platform_get_drvdata(pdev); + struct adp5520_bl *data = bl_get_data(bl); + + adp5520_clr_bits(data->master, ADP5520_MODE_STATUS, ADP5520_BL_EN); + + if (data->pdata->en_ambl_sens) + sysfs_remove_group(&bl->dev.kobj, + &adp5520_bl_attr_group); +} + +#ifdef CONFIG_PM_SLEEP +static int adp5520_bl_suspend(struct device *dev) +{ + struct backlight_device *bl = dev_get_drvdata(dev); + + return adp5520_bl_set(bl, 0); +} + +static int adp5520_bl_resume(struct device *dev) +{ + struct backlight_device *bl = dev_get_drvdata(dev); + + backlight_update_status(bl); + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(adp5520_bl_pm_ops, adp5520_bl_suspend, + adp5520_bl_resume); + +static struct platform_driver adp5520_bl_driver = { + .driver = { + .name = "adp5520-backlight", + .pm = &adp5520_bl_pm_ops, + }, + .probe = adp5520_bl_probe, + .remove_new = adp5520_bl_remove, +}; + +module_platform_driver(adp5520_bl_driver); + +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); +MODULE_DESCRIPTION("ADP5520(01) Backlight Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:adp5520-backlight"); diff --git a/drivers/video/backlight/adp8860_bl.c b/drivers/video/backlight/adp8860_bl.c new file mode 100644 index 0000000000..f51ada4795 --- /dev/null +++ b/drivers/video/backlight/adp8860_bl.c @@ -0,0 +1,815 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Backlight driver for Analog Devices ADP8860 Backlight Devices + * + * Copyright 2009-2010 Analog Devices Inc. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/pm.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> +#include <linux/fb.h> +#include <linux/backlight.h> +#include <linux/leds.h> +#include <linux/slab.h> +#include <linux/workqueue.h> + +#include <linux/platform_data/adp8860.h> +#define ADP8860_EXT_FEATURES +#define ADP8860_USE_LEDS + +#define ADP8860_MFDVID 0x00 /* Manufacturer and device ID */ +#define ADP8860_MDCR 0x01 /* Device mode and status */ +#define ADP8860_MDCR2 0x02 /* Device mode and Status Register 2 */ +#define ADP8860_INTR_EN 0x03 /* Interrupts enable */ +#define ADP8860_CFGR 0x04 /* Configuration register */ +#define ADP8860_BLSEN 0x05 /* Sink enable backlight or independent */ +#define ADP8860_BLOFF 0x06 /* Backlight off timeout */ +#define ADP8860_BLDIM 0x07 /* Backlight dim timeout */ +#define ADP8860_BLFR 0x08 /* Backlight fade in and out rates */ +#define ADP8860_BLMX1 0x09 /* Backlight (Brightness Level 1-daylight) maximum current */ +#define ADP8860_BLDM1 0x0A /* Backlight (Brightness Level 1-daylight) dim current */ +#define ADP8860_BLMX2 0x0B /* Backlight (Brightness Level 2-office) maximum current */ +#define ADP8860_BLDM2 0x0C /* Backlight (Brightness Level 2-office) dim current */ +#define ADP8860_BLMX3 0x0D /* Backlight (Brightness Level 3-dark) maximum current */ +#define ADP8860_BLDM3 0x0E /* Backlight (Brightness Level 3-dark) dim current */ +#define ADP8860_ISCFR 0x0F /* Independent sink current fade control register */ +#define ADP8860_ISCC 0x10 /* Independent sink current control register */ +#define ADP8860_ISCT1 0x11 /* Independent Sink Current Timer Register LED[7:5] */ +#define ADP8860_ISCT2 0x12 /* Independent Sink Current Timer Register LED[4:1] */ +#define ADP8860_ISCF 0x13 /* Independent sink current fade register */ +#define ADP8860_ISC7 0x14 /* Independent Sink Current LED7 */ +#define ADP8860_ISC6 0x15 /* Independent Sink Current LED6 */ +#define ADP8860_ISC5 0x16 /* Independent Sink Current LED5 */ +#define ADP8860_ISC4 0x17 /* Independent Sink Current LED4 */ +#define ADP8860_ISC3 0x18 /* Independent Sink Current LED3 */ +#define ADP8860_ISC2 0x19 /* Independent Sink Current LED2 */ +#define ADP8860_ISC1 0x1A /* Independent Sink Current LED1 */ +#define ADP8860_CCFG 0x1B /* Comparator configuration */ +#define ADP8860_CCFG2 0x1C /* Second comparator configuration */ +#define ADP8860_L2_TRP 0x1D /* L2 comparator reference */ +#define ADP8860_L2_HYS 0x1E /* L2 hysteresis */ +#define ADP8860_L3_TRP 0x1F /* L3 comparator reference */ +#define ADP8860_L3_HYS 0x20 /* L3 hysteresis */ +#define ADP8860_PH1LEVL 0x21 /* First phototransistor ambient light level-low byte register */ +#define ADP8860_PH1LEVH 0x22 /* First phototransistor ambient light level-high byte register */ +#define ADP8860_PH2LEVL 0x23 /* Second phototransistor ambient light level-low byte register */ +#define ADP8860_PH2LEVH 0x24 /* Second phototransistor ambient light level-high byte register */ + +#define ADP8860_MANUFID 0x0 /* Analog Devices ADP8860 Manufacturer ID */ +#define ADP8861_MANUFID 0x4 /* Analog Devices ADP8861 Manufacturer ID */ +#define ADP8863_MANUFID 0x2 /* Analog Devices ADP8863 Manufacturer ID */ + +#define ADP8860_DEVID(x) ((x) & 0xF) +#define ADP8860_MANID(x) ((x) >> 4) + +/* MDCR Device mode and status */ +#define INT_CFG (1 << 6) +#define NSTBY (1 << 5) +#define DIM_EN (1 << 4) +#define GDWN_DIS (1 << 3) +#define SIS_EN (1 << 2) +#define CMP_AUTOEN (1 << 1) +#define BLEN (1 << 0) + +/* ADP8860_CCFG Main ALS comparator level enable */ +#define L3_EN (1 << 1) +#define L2_EN (1 << 0) + +#define CFGR_BLV_SHIFT 3 +#define CFGR_BLV_MASK 0x3 +#define ADP8860_FLAG_LED_MASK 0xFF + +#define FADE_VAL(in, out) ((0xF & (in)) | ((0xF & (out)) << 4)) +#define BL_CFGR_VAL(law, blv) ((((blv) & CFGR_BLV_MASK) << CFGR_BLV_SHIFT) | ((0x3 & (law)) << 1)) +#define ALS_CCFG_VAL(filt) ((0x7 & filt) << 5) + +enum { + adp8860, + adp8861, + adp8863 +}; + +struct adp8860_led { + struct led_classdev cdev; + struct work_struct work; + struct i2c_client *client; + enum led_brightness new_brightness; + int id; + int flags; +}; + +struct adp8860_bl { + struct i2c_client *client; + struct backlight_device *bl; + struct adp8860_led *led; + struct adp8860_backlight_platform_data *pdata; + struct mutex lock; + unsigned long cached_daylight_max; + int id; + int revid; + int current_brightness; + unsigned en_ambl_sens:1; + unsigned gdwn_dis:1; +}; + +static int adp8860_read(struct i2c_client *client, int reg, uint8_t *val) +{ + int ret; + + ret = i2c_smbus_read_byte_data(client, reg); + if (ret < 0) { + dev_err(&client->dev, "failed reading at 0x%02x\n", reg); + return ret; + } + + *val = (uint8_t)ret; + return 0; +} + +static int adp8860_write(struct i2c_client *client, u8 reg, u8 val) +{ + return i2c_smbus_write_byte_data(client, reg, val); +} + +static int adp8860_set_bits(struct i2c_client *client, int reg, uint8_t bit_mask) +{ + struct adp8860_bl *data = i2c_get_clientdata(client); + uint8_t reg_val; + int ret; + + mutex_lock(&data->lock); + + ret = adp8860_read(client, reg, ®_val); + + if (!ret && ((reg_val & bit_mask) != bit_mask)) { + reg_val |= bit_mask; + ret = adp8860_write(client, reg, reg_val); + } + + mutex_unlock(&data->lock); + return ret; +} + +static int adp8860_clr_bits(struct i2c_client *client, int reg, uint8_t bit_mask) +{ + struct adp8860_bl *data = i2c_get_clientdata(client); + uint8_t reg_val; + int ret; + + mutex_lock(&data->lock); + + ret = adp8860_read(client, reg, ®_val); + + if (!ret && (reg_val & bit_mask)) { + reg_val &= ~bit_mask; + ret = adp8860_write(client, reg, reg_val); + } + + mutex_unlock(&data->lock); + return ret; +} + +/* + * Independent sink / LED + */ +#if defined(ADP8860_USE_LEDS) +static void adp8860_led_work(struct work_struct *work) +{ + struct adp8860_led *led = container_of(work, struct adp8860_led, work); + + adp8860_write(led->client, ADP8860_ISC1 - led->id + 1, + led->new_brightness >> 1); +} + +static void adp8860_led_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct adp8860_led *led; + + led = container_of(led_cdev, struct adp8860_led, cdev); + led->new_brightness = value; + schedule_work(&led->work); +} + +static int adp8860_led_setup(struct adp8860_led *led) +{ + struct i2c_client *client = led->client; + int ret = 0; + + ret = adp8860_write(client, ADP8860_ISC1 - led->id + 1, 0); + ret |= adp8860_set_bits(client, ADP8860_ISCC, 1 << (led->id - 1)); + + if (led->id > 4) + ret |= adp8860_set_bits(client, ADP8860_ISCT1, + (led->flags & 0x3) << ((led->id - 5) * 2)); + else + ret |= adp8860_set_bits(client, ADP8860_ISCT2, + (led->flags & 0x3) << ((led->id - 1) * 2)); + + return ret; +} + +static int adp8860_led_probe(struct i2c_client *client) +{ + struct adp8860_backlight_platform_data *pdata = + dev_get_platdata(&client->dev); + struct adp8860_bl *data = i2c_get_clientdata(client); + struct adp8860_led *led, *led_dat; + struct led_info *cur_led; + int ret, i; + + led = devm_kcalloc(&client->dev, pdata->num_leds, sizeof(*led), + GFP_KERNEL); + if (led == NULL) + return -ENOMEM; + + ret = adp8860_write(client, ADP8860_ISCFR, pdata->led_fade_law); + ret = adp8860_write(client, ADP8860_ISCT1, + (pdata->led_on_time & 0x3) << 6); + ret |= adp8860_write(client, ADP8860_ISCF, + FADE_VAL(pdata->led_fade_in, pdata->led_fade_out)); + + if (ret) { + dev_err(&client->dev, "failed to write\n"); + return ret; + } + + for (i = 0; i < pdata->num_leds; ++i) { + cur_led = &pdata->leds[i]; + led_dat = &led[i]; + + led_dat->id = cur_led->flags & ADP8860_FLAG_LED_MASK; + + if (led_dat->id > 7 || led_dat->id < 1) { + dev_err(&client->dev, "Invalid LED ID %d\n", + led_dat->id); + ret = -EINVAL; + goto err; + } + + if (pdata->bl_led_assign & (1 << (led_dat->id - 1))) { + dev_err(&client->dev, "LED %d used by Backlight\n", + led_dat->id); + ret = -EBUSY; + goto err; + } + + led_dat->cdev.name = cur_led->name; + led_dat->cdev.default_trigger = cur_led->default_trigger; + led_dat->cdev.brightness_set = adp8860_led_set; + led_dat->cdev.brightness = LED_OFF; + led_dat->flags = cur_led->flags >> FLAG_OFFT_SHIFT; + led_dat->client = client; + led_dat->new_brightness = LED_OFF; + INIT_WORK(&led_dat->work, adp8860_led_work); + + ret = led_classdev_register(&client->dev, &led_dat->cdev); + if (ret) { + dev_err(&client->dev, "failed to register LED %d\n", + led_dat->id); + goto err; + } + + ret = adp8860_led_setup(led_dat); + if (ret) { + dev_err(&client->dev, "failed to write\n"); + i++; + goto err; + } + } + + data->led = led; + + return 0; + + err: + for (i = i - 1; i >= 0; --i) { + led_classdev_unregister(&led[i].cdev); + cancel_work_sync(&led[i].work); + } + + return ret; +} + +static int adp8860_led_remove(struct i2c_client *client) +{ + struct adp8860_backlight_platform_data *pdata = + dev_get_platdata(&client->dev); + struct adp8860_bl *data = i2c_get_clientdata(client); + int i; + + for (i = 0; i < pdata->num_leds; i++) { + led_classdev_unregister(&data->led[i].cdev); + cancel_work_sync(&data->led[i].work); + } + + return 0; +} +#else +static int adp8860_led_probe(struct i2c_client *client) +{ + return 0; +} + +static int adp8860_led_remove(struct i2c_client *client) +{ + return 0; +} +#endif + +static int adp8860_bl_set(struct backlight_device *bl, int brightness) +{ + struct adp8860_bl *data = bl_get_data(bl); + struct i2c_client *client = data->client; + int ret = 0; + + if (data->en_ambl_sens) { + if ((brightness > 0) && (brightness < ADP8860_MAX_BRIGHTNESS)) { + /* Disable Ambient Light auto adjust */ + ret |= adp8860_clr_bits(client, ADP8860_MDCR, + CMP_AUTOEN); + ret |= adp8860_write(client, ADP8860_BLMX1, brightness); + } else { + /* + * MAX_BRIGHTNESS -> Enable Ambient Light auto adjust + * restore daylight l1 sysfs brightness + */ + ret |= adp8860_write(client, ADP8860_BLMX1, + data->cached_daylight_max); + ret |= adp8860_set_bits(client, ADP8860_MDCR, + CMP_AUTOEN); + } + } else + ret |= adp8860_write(client, ADP8860_BLMX1, brightness); + + if (data->current_brightness && brightness == 0) + ret |= adp8860_set_bits(client, + ADP8860_MDCR, DIM_EN); + else if (data->current_brightness == 0 && brightness) + ret |= adp8860_clr_bits(client, + ADP8860_MDCR, DIM_EN); + + if (!ret) + data->current_brightness = brightness; + + return ret; +} + +static int adp8860_bl_update_status(struct backlight_device *bl) +{ + return adp8860_bl_set(bl, backlight_get_brightness(bl)); +} + +static int adp8860_bl_get_brightness(struct backlight_device *bl) +{ + struct adp8860_bl *data = bl_get_data(bl); + + return data->current_brightness; +} + +static const struct backlight_ops adp8860_bl_ops = { + .update_status = adp8860_bl_update_status, + .get_brightness = adp8860_bl_get_brightness, +}; + +static int adp8860_bl_setup(struct backlight_device *bl) +{ + struct adp8860_bl *data = bl_get_data(bl); + struct i2c_client *client = data->client; + struct adp8860_backlight_platform_data *pdata = data->pdata; + int ret = 0; + + ret |= adp8860_write(client, ADP8860_BLSEN, ~pdata->bl_led_assign); + ret |= adp8860_write(client, ADP8860_BLMX1, pdata->l1_daylight_max); + ret |= adp8860_write(client, ADP8860_BLDM1, pdata->l1_daylight_dim); + + if (data->en_ambl_sens) { + data->cached_daylight_max = pdata->l1_daylight_max; + ret |= adp8860_write(client, ADP8860_BLMX2, + pdata->l2_office_max); + ret |= adp8860_write(client, ADP8860_BLDM2, + pdata->l2_office_dim); + ret |= adp8860_write(client, ADP8860_BLMX3, + pdata->l3_dark_max); + ret |= adp8860_write(client, ADP8860_BLDM3, + pdata->l3_dark_dim); + + ret |= adp8860_write(client, ADP8860_L2_TRP, pdata->l2_trip); + ret |= adp8860_write(client, ADP8860_L2_HYS, pdata->l2_hyst); + ret |= adp8860_write(client, ADP8860_L3_TRP, pdata->l3_trip); + ret |= adp8860_write(client, ADP8860_L3_HYS, pdata->l3_hyst); + ret |= adp8860_write(client, ADP8860_CCFG, L2_EN | L3_EN | + ALS_CCFG_VAL(pdata->abml_filt)); + } + + ret |= adp8860_write(client, ADP8860_CFGR, + BL_CFGR_VAL(pdata->bl_fade_law, 0)); + + ret |= adp8860_write(client, ADP8860_BLFR, FADE_VAL(pdata->bl_fade_in, + pdata->bl_fade_out)); + + ret |= adp8860_set_bits(client, ADP8860_MDCR, BLEN | DIM_EN | NSTBY | + (data->gdwn_dis ? GDWN_DIS : 0)); + + return ret; +} + +static ssize_t adp8860_show(struct device *dev, char *buf, int reg) +{ + struct adp8860_bl *data = dev_get_drvdata(dev); + int error; + uint8_t reg_val; + + mutex_lock(&data->lock); + error = adp8860_read(data->client, reg, ®_val); + mutex_unlock(&data->lock); + + if (error < 0) + return error; + + return sprintf(buf, "%u\n", reg_val); +} + +static ssize_t adp8860_store(struct device *dev, const char *buf, + size_t count, int reg) +{ + struct adp8860_bl *data = dev_get_drvdata(dev); + unsigned long val; + int ret; + + ret = kstrtoul(buf, 10, &val); + if (ret) + return ret; + + mutex_lock(&data->lock); + adp8860_write(data->client, reg, val); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t adp8860_bl_l3_dark_max_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8860_show(dev, buf, ADP8860_BLMX3); +} + +static ssize_t adp8860_bl_l3_dark_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + return adp8860_store(dev, buf, count, ADP8860_BLMX3); +} + +static DEVICE_ATTR(l3_dark_max, 0664, adp8860_bl_l3_dark_max_show, + adp8860_bl_l3_dark_max_store); + +static ssize_t adp8860_bl_l2_office_max_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8860_show(dev, buf, ADP8860_BLMX2); +} + +static ssize_t adp8860_bl_l2_office_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + return adp8860_store(dev, buf, count, ADP8860_BLMX2); +} +static DEVICE_ATTR(l2_office_max, 0664, adp8860_bl_l2_office_max_show, + adp8860_bl_l2_office_max_store); + +static ssize_t adp8860_bl_l1_daylight_max_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8860_show(dev, buf, ADP8860_BLMX1); +} + +static ssize_t adp8860_bl_l1_daylight_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct adp8860_bl *data = dev_get_drvdata(dev); + int ret = kstrtoul(buf, 10, &data->cached_daylight_max); + + if (ret) + return ret; + + return adp8860_store(dev, buf, count, ADP8860_BLMX1); +} +static DEVICE_ATTR(l1_daylight_max, 0664, adp8860_bl_l1_daylight_max_show, + adp8860_bl_l1_daylight_max_store); + +static ssize_t adp8860_bl_l3_dark_dim_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8860_show(dev, buf, ADP8860_BLDM3); +} + +static ssize_t adp8860_bl_l3_dark_dim_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return adp8860_store(dev, buf, count, ADP8860_BLDM3); +} +static DEVICE_ATTR(l3_dark_dim, 0664, adp8860_bl_l3_dark_dim_show, + adp8860_bl_l3_dark_dim_store); + +static ssize_t adp8860_bl_l2_office_dim_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8860_show(dev, buf, ADP8860_BLDM2); +} + +static ssize_t adp8860_bl_l2_office_dim_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return adp8860_store(dev, buf, count, ADP8860_BLDM2); +} +static DEVICE_ATTR(l2_office_dim, 0664, adp8860_bl_l2_office_dim_show, + adp8860_bl_l2_office_dim_store); + +static ssize_t adp8860_bl_l1_daylight_dim_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8860_show(dev, buf, ADP8860_BLDM1); +} + +static ssize_t adp8860_bl_l1_daylight_dim_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return adp8860_store(dev, buf, count, ADP8860_BLDM1); +} +static DEVICE_ATTR(l1_daylight_dim, 0664, adp8860_bl_l1_daylight_dim_show, + adp8860_bl_l1_daylight_dim_store); + +#ifdef ADP8860_EXT_FEATURES +static ssize_t adp8860_bl_ambient_light_level_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct adp8860_bl *data = dev_get_drvdata(dev); + int error; + uint8_t reg_val; + uint16_t ret_val; + + mutex_lock(&data->lock); + error = adp8860_read(data->client, ADP8860_PH1LEVL, ®_val); + if (!error) { + ret_val = reg_val; + error = adp8860_read(data->client, ADP8860_PH1LEVH, ®_val); + } + mutex_unlock(&data->lock); + + if (error) + return error; + + /* Return 13-bit conversion value for the first light sensor */ + ret_val += (reg_val & 0x1F) << 8; + + return sprintf(buf, "%u\n", ret_val); +} +static DEVICE_ATTR(ambient_light_level, 0444, + adp8860_bl_ambient_light_level_show, NULL); + +static ssize_t adp8860_bl_ambient_light_zone_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct adp8860_bl *data = dev_get_drvdata(dev); + int error; + uint8_t reg_val; + + mutex_lock(&data->lock); + error = adp8860_read(data->client, ADP8860_CFGR, ®_val); + mutex_unlock(&data->lock); + + if (error < 0) + return error; + + return sprintf(buf, "%u\n", + ((reg_val >> CFGR_BLV_SHIFT) & CFGR_BLV_MASK) + 1); +} + +static ssize_t adp8860_bl_ambient_light_zone_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct adp8860_bl *data = dev_get_drvdata(dev); + unsigned long val; + uint8_t reg_val; + int ret; + + ret = kstrtoul(buf, 10, &val); + if (ret) + return ret; + + if (val == 0) { + /* Enable automatic ambient light sensing */ + adp8860_set_bits(data->client, ADP8860_MDCR, CMP_AUTOEN); + } else if ((val > 0) && (val <= 3)) { + /* Disable automatic ambient light sensing */ + adp8860_clr_bits(data->client, ADP8860_MDCR, CMP_AUTOEN); + + /* Set user supplied ambient light zone */ + mutex_lock(&data->lock); + ret = adp8860_read(data->client, ADP8860_CFGR, ®_val); + if (!ret) { + reg_val &= ~(CFGR_BLV_MASK << CFGR_BLV_SHIFT); + reg_val |= (val - 1) << CFGR_BLV_SHIFT; + adp8860_write(data->client, ADP8860_CFGR, reg_val); + } + mutex_unlock(&data->lock); + } + + return count; +} +static DEVICE_ATTR(ambient_light_zone, 0664, + adp8860_bl_ambient_light_zone_show, + adp8860_bl_ambient_light_zone_store); +#endif + +static struct attribute *adp8860_bl_attributes[] = { + &dev_attr_l3_dark_max.attr, + &dev_attr_l3_dark_dim.attr, + &dev_attr_l2_office_max.attr, + &dev_attr_l2_office_dim.attr, + &dev_attr_l1_daylight_max.attr, + &dev_attr_l1_daylight_dim.attr, +#ifdef ADP8860_EXT_FEATURES + &dev_attr_ambient_light_level.attr, + &dev_attr_ambient_light_zone.attr, +#endif + NULL +}; + +static const struct attribute_group adp8860_bl_attr_group = { + .attrs = adp8860_bl_attributes, +}; + +static int adp8860_probe(struct i2c_client *client) +{ + const struct i2c_device_id *id = i2c_client_get_device_id(client); + struct backlight_device *bl; + struct adp8860_bl *data; + struct adp8860_backlight_platform_data *pdata = + dev_get_platdata(&client->dev); + struct backlight_properties props; + uint8_t reg_val; + int ret; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_err(&client->dev, "SMBUS Byte Data not Supported\n"); + return -EIO; + } + + if (!pdata) { + dev_err(&client->dev, "no platform data?\n"); + return -EINVAL; + } + + data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); + if (data == NULL) + return -ENOMEM; + + ret = adp8860_read(client, ADP8860_MFDVID, ®_val); + if (ret < 0) + return ret; + + switch (ADP8860_MANID(reg_val)) { + case ADP8863_MANUFID: + data->gdwn_dis = !!pdata->gdwn_dis; + fallthrough; + case ADP8860_MANUFID: + data->en_ambl_sens = !!pdata->en_ambl_sens; + break; + case ADP8861_MANUFID: + data->gdwn_dis = !!pdata->gdwn_dis; + break; + default: + dev_err(&client->dev, "failed to probe\n"); + return -ENODEV; + } + + /* It's confirmed that the DEVID field is actually a REVID */ + + data->revid = ADP8860_DEVID(reg_val); + data->client = client; + data->pdata = pdata; + data->id = id->driver_data; + data->current_brightness = 0; + i2c_set_clientdata(client, data); + + memset(&props, 0, sizeof(props)); + props.type = BACKLIGHT_RAW; + props.max_brightness = ADP8860_MAX_BRIGHTNESS; + + mutex_init(&data->lock); + + bl = devm_backlight_device_register(&client->dev, + dev_driver_string(&client->dev), + &client->dev, data, &adp8860_bl_ops, &props); + if (IS_ERR(bl)) { + dev_err(&client->dev, "failed to register backlight\n"); + return PTR_ERR(bl); + } + + bl->props.brightness = ADP8860_MAX_BRIGHTNESS; + + data->bl = bl; + + if (data->en_ambl_sens) + ret = sysfs_create_group(&bl->dev.kobj, + &adp8860_bl_attr_group); + + if (ret) { + dev_err(&client->dev, "failed to register sysfs\n"); + return ret; + } + + ret = adp8860_bl_setup(bl); + if (ret) { + ret = -EIO; + goto out; + } + + backlight_update_status(bl); + + dev_info(&client->dev, "%s Rev.%d Backlight\n", + client->name, data->revid); + + if (pdata->num_leds) + adp8860_led_probe(client); + + return 0; + +out: + if (data->en_ambl_sens) + sysfs_remove_group(&data->bl->dev.kobj, + &adp8860_bl_attr_group); + + return ret; +} + +static void adp8860_remove(struct i2c_client *client) +{ + struct adp8860_bl *data = i2c_get_clientdata(client); + + adp8860_clr_bits(client, ADP8860_MDCR, NSTBY); + + if (data->led) + adp8860_led_remove(client); + + if (data->en_ambl_sens) + sysfs_remove_group(&data->bl->dev.kobj, + &adp8860_bl_attr_group); +} + +#ifdef CONFIG_PM_SLEEP +static int adp8860_i2c_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + adp8860_clr_bits(client, ADP8860_MDCR, NSTBY); + + return 0; +} + +static int adp8860_i2c_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + adp8860_set_bits(client, ADP8860_MDCR, NSTBY | BLEN); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(adp8860_i2c_pm_ops, adp8860_i2c_suspend, + adp8860_i2c_resume); + +static const struct i2c_device_id adp8860_id[] = { + { "adp8860", adp8860 }, + { "adp8861", adp8861 }, + { "adp8863", adp8863 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adp8860_id); + +static struct i2c_driver adp8860_driver = { + .driver = { + .name = KBUILD_MODNAME, + .pm = &adp8860_i2c_pm_ops, + }, + .probe = adp8860_probe, + .remove = adp8860_remove, + .id_table = adp8860_id, +}; + +module_i2c_driver(adp8860_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); +MODULE_DESCRIPTION("ADP8860 Backlight driver"); diff --git a/drivers/video/backlight/adp8870_bl.c b/drivers/video/backlight/adp8870_bl.c new file mode 100644 index 0000000000..6bb18dc970 --- /dev/null +++ b/drivers/video/backlight/adp8870_bl.c @@ -0,0 +1,985 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Backlight driver for Analog Devices ADP8870 Backlight Devices + * + * Copyright 2009-2011 Analog Devices Inc. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/pm.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> +#include <linux/fb.h> +#include <linux/backlight.h> +#include <linux/leds.h> +#include <linux/workqueue.h> +#include <linux/slab.h> + +#include <linux/platform_data/adp8870.h> +#define ADP8870_EXT_FEATURES +#define ADP8870_USE_LEDS + + +#define ADP8870_MFDVID 0x00 /* Manufacturer and device ID */ +#define ADP8870_MDCR 0x01 /* Device mode and status */ +#define ADP8870_INT_STAT 0x02 /* Interrupts status */ +#define ADP8870_INT_EN 0x03 /* Interrupts enable */ +#define ADP8870_CFGR 0x04 /* Configuration register */ +#define ADP8870_BLSEL 0x05 /* Sink enable backlight or independent */ +#define ADP8870_PWMLED 0x06 /* PWM Enable Selection Register */ +#define ADP8870_BLOFF 0x07 /* Backlight off timeout */ +#define ADP8870_BLDIM 0x08 /* Backlight dim timeout */ +#define ADP8870_BLFR 0x09 /* Backlight fade in and out rates */ +#define ADP8870_BLMX1 0x0A /* Backlight (Brightness Level 1-daylight) maximum current */ +#define ADP8870_BLDM1 0x0B /* Backlight (Brightness Level 1-daylight) dim current */ +#define ADP8870_BLMX2 0x0C /* Backlight (Brightness Level 2-bright) maximum current */ +#define ADP8870_BLDM2 0x0D /* Backlight (Brightness Level 2-bright) dim current */ +#define ADP8870_BLMX3 0x0E /* Backlight (Brightness Level 3-office) maximum current */ +#define ADP8870_BLDM3 0x0F /* Backlight (Brightness Level 3-office) dim current */ +#define ADP8870_BLMX4 0x10 /* Backlight (Brightness Level 4-indoor) maximum current */ +#define ADP8870_BLDM4 0x11 /* Backlight (Brightness Level 4-indoor) dim current */ +#define ADP8870_BLMX5 0x12 /* Backlight (Brightness Level 5-dark) maximum current */ +#define ADP8870_BLDM5 0x13 /* Backlight (Brightness Level 5-dark) dim current */ +#define ADP8870_ISCLAW 0x1A /* Independent sink current fade law register */ +#define ADP8870_ISCC 0x1B /* Independent sink current control register */ +#define ADP8870_ISCT1 0x1C /* Independent Sink Current Timer Register LED[7:5] */ +#define ADP8870_ISCT2 0x1D /* Independent Sink Current Timer Register LED[4:1] */ +#define ADP8870_ISCF 0x1E /* Independent sink current fade register */ +#define ADP8870_ISC1 0x1F /* Independent Sink Current LED1 */ +#define ADP8870_ISC2 0x20 /* Independent Sink Current LED2 */ +#define ADP8870_ISC3 0x21 /* Independent Sink Current LED3 */ +#define ADP8870_ISC4 0x22 /* Independent Sink Current LED4 */ +#define ADP8870_ISC5 0x23 /* Independent Sink Current LED5 */ +#define ADP8870_ISC6 0x24 /* Independent Sink Current LED6 */ +#define ADP8870_ISC7 0x25 /* Independent Sink Current LED7 (Brightness Level 1-daylight) */ +#define ADP8870_ISC7_L2 0x26 /* Independent Sink Current LED7 (Brightness Level 2-bright) */ +#define ADP8870_ISC7_L3 0x27 /* Independent Sink Current LED7 (Brightness Level 3-office) */ +#define ADP8870_ISC7_L4 0x28 /* Independent Sink Current LED7 (Brightness Level 4-indoor) */ +#define ADP8870_ISC7_L5 0x29 /* Independent Sink Current LED7 (Brightness Level 5-dark) */ +#define ADP8870_CMP_CTL 0x2D /* ALS Comparator Control Register */ +#define ADP8870_ALS1_EN 0x2E /* Main ALS comparator level enable */ +#define ADP8870_ALS2_EN 0x2F /* Second ALS comparator level enable */ +#define ADP8870_ALS1_STAT 0x30 /* Main ALS Comparator Status Register */ +#define ADP8870_ALS2_STAT 0x31 /* Second ALS Comparator Status Register */ +#define ADP8870_L2TRP 0x32 /* L2 comparator reference */ +#define ADP8870_L2HYS 0x33 /* L2 hysteresis */ +#define ADP8870_L3TRP 0x34 /* L3 comparator reference */ +#define ADP8870_L3HYS 0x35 /* L3 hysteresis */ +#define ADP8870_L4TRP 0x36 /* L4 comparator reference */ +#define ADP8870_L4HYS 0x37 /* L4 hysteresis */ +#define ADP8870_L5TRP 0x38 /* L5 comparator reference */ +#define ADP8870_L5HYS 0x39 /* L5 hysteresis */ +#define ADP8870_PH1LEVL 0x40 /* First phototransistor ambient light level-low byte register */ +#define ADP8870_PH1LEVH 0x41 /* First phototransistor ambient light level-high byte register */ +#define ADP8870_PH2LEVL 0x42 /* Second phototransistor ambient light level-low byte register */ +#define ADP8870_PH2LEVH 0x43 /* Second phototransistor ambient light level-high byte register */ + +#define ADP8870_MANUFID 0x3 /* Analog Devices AD8870 Manufacturer and device ID */ +#define ADP8870_DEVID(x) ((x) & 0xF) +#define ADP8870_MANID(x) ((x) >> 4) + +/* MDCR Device mode and status */ +#define D7ALSEN (1 << 7) +#define INT_CFG (1 << 6) +#define NSTBY (1 << 5) +#define DIM_EN (1 << 4) +#define GDWN_DIS (1 << 3) +#define SIS_EN (1 << 2) +#define CMP_AUTOEN (1 << 1) +#define BLEN (1 << 0) + +/* ADP8870_ALS1_EN Main ALS comparator level enable */ +#define L5_EN (1 << 3) +#define L4_EN (1 << 2) +#define L3_EN (1 << 1) +#define L2_EN (1 << 0) + +#define CFGR_BLV_SHIFT 3 +#define CFGR_BLV_MASK 0x7 +#define ADP8870_FLAG_LED_MASK 0xFF + +#define FADE_VAL(in, out) ((0xF & (in)) | ((0xF & (out)) << 4)) +#define BL_CFGR_VAL(law, blv) ((((blv) & CFGR_BLV_MASK) << CFGR_BLV_SHIFT) | ((0x3 & (law)) << 1)) +#define ALS_CMPR_CFG_VAL(filt) ((0x7 & (filt)) << 1) + +struct adp8870_bl { + struct i2c_client *client; + struct backlight_device *bl; + struct adp8870_led *led; + struct adp8870_backlight_platform_data *pdata; + struct mutex lock; + unsigned long cached_daylight_max; + int id; + int revid; + int current_brightness; +}; + +struct adp8870_led { + struct led_classdev cdev; + struct work_struct work; + struct i2c_client *client; + enum led_brightness new_brightness; + int id; + int flags; +}; + +static int adp8870_read(struct i2c_client *client, int reg, uint8_t *val) +{ + int ret; + + ret = i2c_smbus_read_byte_data(client, reg); + if (ret < 0) { + dev_err(&client->dev, "failed reading at 0x%02x\n", reg); + return ret; + } + + *val = ret; + return 0; +} + + +static int adp8870_write(struct i2c_client *client, u8 reg, u8 val) +{ + int ret = i2c_smbus_write_byte_data(client, reg, val); + + if (ret) + dev_err(&client->dev, "failed to write\n"); + + return ret; +} + +static int adp8870_set_bits(struct i2c_client *client, int reg, uint8_t bit_mask) +{ + struct adp8870_bl *data = i2c_get_clientdata(client); + uint8_t reg_val; + int ret; + + mutex_lock(&data->lock); + + ret = adp8870_read(client, reg, ®_val); + + if (!ret && ((reg_val & bit_mask) != bit_mask)) { + reg_val |= bit_mask; + ret = adp8870_write(client, reg, reg_val); + } + + mutex_unlock(&data->lock); + return ret; +} + +static int adp8870_clr_bits(struct i2c_client *client, int reg, uint8_t bit_mask) +{ + struct adp8870_bl *data = i2c_get_clientdata(client); + uint8_t reg_val; + int ret; + + mutex_lock(&data->lock); + + ret = adp8870_read(client, reg, ®_val); + + if (!ret && (reg_val & bit_mask)) { + reg_val &= ~bit_mask; + ret = adp8870_write(client, reg, reg_val); + } + + mutex_unlock(&data->lock); + return ret; +} + +/* + * Independent sink / LED + */ +#if defined(ADP8870_USE_LEDS) +static void adp8870_led_work(struct work_struct *work) +{ + struct adp8870_led *led = container_of(work, struct adp8870_led, work); + + adp8870_write(led->client, ADP8870_ISC1 + led->id - 1, + led->new_brightness >> 1); +} + +static void adp8870_led_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct adp8870_led *led; + + led = container_of(led_cdev, struct adp8870_led, cdev); + led->new_brightness = value; + /* + * Use workqueue for IO since I2C operations can sleep. + */ + schedule_work(&led->work); +} + +static int adp8870_led_setup(struct adp8870_led *led) +{ + struct i2c_client *client = led->client; + int ret = 0; + + ret = adp8870_write(client, ADP8870_ISC1 + led->id - 1, 0); + if (ret) + return ret; + + ret = adp8870_set_bits(client, ADP8870_ISCC, 1 << (led->id - 1)); + if (ret) + return ret; + + if (led->id > 4) + ret = adp8870_set_bits(client, ADP8870_ISCT1, + (led->flags & 0x3) << ((led->id - 5) * 2)); + else + ret = adp8870_set_bits(client, ADP8870_ISCT2, + (led->flags & 0x3) << ((led->id - 1) * 2)); + + return ret; +} + +static int adp8870_led_probe(struct i2c_client *client) +{ + struct adp8870_backlight_platform_data *pdata = + dev_get_platdata(&client->dev); + struct adp8870_bl *data = i2c_get_clientdata(client); + struct adp8870_led *led, *led_dat; + struct led_info *cur_led; + int ret, i; + + led = devm_kcalloc(&client->dev, pdata->num_leds, sizeof(*led), + GFP_KERNEL); + if (led == NULL) + return -ENOMEM; + + ret = adp8870_write(client, ADP8870_ISCLAW, pdata->led_fade_law); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_ISCT1, + (pdata->led_on_time & 0x3) << 6); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_ISCF, + FADE_VAL(pdata->led_fade_in, pdata->led_fade_out)); + if (ret) + return ret; + + for (i = 0; i < pdata->num_leds; ++i) { + cur_led = &pdata->leds[i]; + led_dat = &led[i]; + + led_dat->id = cur_led->flags & ADP8870_FLAG_LED_MASK; + + if (led_dat->id > 7 || led_dat->id < 1) { + dev_err(&client->dev, "Invalid LED ID %d\n", + led_dat->id); + ret = -EINVAL; + goto err; + } + + if (pdata->bl_led_assign & (1 << (led_dat->id - 1))) { + dev_err(&client->dev, "LED %d used by Backlight\n", + led_dat->id); + ret = -EBUSY; + goto err; + } + + led_dat->cdev.name = cur_led->name; + led_dat->cdev.default_trigger = cur_led->default_trigger; + led_dat->cdev.brightness_set = adp8870_led_set; + led_dat->cdev.brightness = LED_OFF; + led_dat->flags = cur_led->flags >> FLAG_OFFT_SHIFT; + led_dat->client = client; + led_dat->new_brightness = LED_OFF; + INIT_WORK(&led_dat->work, adp8870_led_work); + + ret = led_classdev_register(&client->dev, &led_dat->cdev); + if (ret) { + dev_err(&client->dev, "failed to register LED %d\n", + led_dat->id); + goto err; + } + + ret = adp8870_led_setup(led_dat); + if (ret) { + dev_err(&client->dev, "failed to write\n"); + i++; + goto err; + } + } + + data->led = led; + + return 0; + + err: + for (i = i - 1; i >= 0; --i) { + led_classdev_unregister(&led[i].cdev); + cancel_work_sync(&led[i].work); + } + + return ret; +} + +static int adp8870_led_remove(struct i2c_client *client) +{ + struct adp8870_backlight_platform_data *pdata = + dev_get_platdata(&client->dev); + struct adp8870_bl *data = i2c_get_clientdata(client); + int i; + + for (i = 0; i < pdata->num_leds; i++) { + led_classdev_unregister(&data->led[i].cdev); + cancel_work_sync(&data->led[i].work); + } + + return 0; +} +#else +static int adp8870_led_probe(struct i2c_client *client) +{ + return 0; +} + +static int adp8870_led_remove(struct i2c_client *client) +{ + return 0; +} +#endif + +static int adp8870_bl_set(struct backlight_device *bl, int brightness) +{ + struct adp8870_bl *data = bl_get_data(bl); + struct i2c_client *client = data->client; + int ret = 0; + + if (data->pdata->en_ambl_sens) { + if ((brightness > 0) && (brightness < ADP8870_MAX_BRIGHTNESS)) { + /* Disable Ambient Light auto adjust */ + ret = adp8870_clr_bits(client, ADP8870_MDCR, + CMP_AUTOEN); + if (ret) + return ret; + ret = adp8870_write(client, ADP8870_BLMX1, brightness); + if (ret) + return ret; + } else { + /* + * MAX_BRIGHTNESS -> Enable Ambient Light auto adjust + * restore daylight l1 sysfs brightness + */ + ret = adp8870_write(client, ADP8870_BLMX1, + data->cached_daylight_max); + if (ret) + return ret; + + ret = adp8870_set_bits(client, ADP8870_MDCR, + CMP_AUTOEN); + if (ret) + return ret; + } + } else { + ret = adp8870_write(client, ADP8870_BLMX1, brightness); + if (ret) + return ret; + } + + if (data->current_brightness && brightness == 0) + ret = adp8870_set_bits(client, + ADP8870_MDCR, DIM_EN); + else if (data->current_brightness == 0 && brightness) + ret = adp8870_clr_bits(client, + ADP8870_MDCR, DIM_EN); + + if (!ret) + data->current_brightness = brightness; + + return ret; +} + +static int adp8870_bl_update_status(struct backlight_device *bl) +{ + return adp8870_bl_set(bl, backlight_get_brightness(bl)); +} + +static int adp8870_bl_get_brightness(struct backlight_device *bl) +{ + struct adp8870_bl *data = bl_get_data(bl); + + return data->current_brightness; +} + +static const struct backlight_ops adp8870_bl_ops = { + .update_status = adp8870_bl_update_status, + .get_brightness = adp8870_bl_get_brightness, +}; + +static int adp8870_bl_setup(struct backlight_device *bl) +{ + struct adp8870_bl *data = bl_get_data(bl); + struct i2c_client *client = data->client; + struct adp8870_backlight_platform_data *pdata = data->pdata; + int ret = 0; + + ret = adp8870_write(client, ADP8870_BLSEL, ~pdata->bl_led_assign); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_PWMLED, pdata->pwm_assign); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_BLMX1, pdata->l1_daylight_max); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_BLDM1, pdata->l1_daylight_dim); + if (ret) + return ret; + + if (pdata->en_ambl_sens) { + data->cached_daylight_max = pdata->l1_daylight_max; + ret = adp8870_write(client, ADP8870_BLMX2, + pdata->l2_bright_max); + if (ret) + return ret; + ret = adp8870_write(client, ADP8870_BLDM2, + pdata->l2_bright_dim); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_BLMX3, + pdata->l3_office_max); + if (ret) + return ret; + ret = adp8870_write(client, ADP8870_BLDM3, + pdata->l3_office_dim); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_BLMX4, + pdata->l4_indoor_max); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_BLDM4, + pdata->l4_indor_dim); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_BLMX5, + pdata->l5_dark_max); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_BLDM5, + pdata->l5_dark_dim); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_L2TRP, pdata->l2_trip); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_L2HYS, pdata->l2_hyst); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_L3TRP, pdata->l3_trip); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_L3HYS, pdata->l3_hyst); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_L4TRP, pdata->l4_trip); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_L4HYS, pdata->l4_hyst); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_L5TRP, pdata->l5_trip); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_L5HYS, pdata->l5_hyst); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_ALS1_EN, L5_EN | L4_EN | + L3_EN | L2_EN); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_CMP_CTL, + ALS_CMPR_CFG_VAL(pdata->abml_filt)); + if (ret) + return ret; + } + + ret = adp8870_write(client, ADP8870_CFGR, + BL_CFGR_VAL(pdata->bl_fade_law, 0)); + if (ret) + return ret; + + ret = adp8870_write(client, ADP8870_BLFR, FADE_VAL(pdata->bl_fade_in, + pdata->bl_fade_out)); + if (ret) + return ret; + /* + * ADP8870 Rev0 requires GDWN_DIS bit set + */ + + ret = adp8870_set_bits(client, ADP8870_MDCR, BLEN | DIM_EN | NSTBY | + (data->revid == 0 ? GDWN_DIS : 0)); + + return ret; +} + +static ssize_t adp8870_show(struct device *dev, char *buf, int reg) +{ + struct adp8870_bl *data = dev_get_drvdata(dev); + int error; + uint8_t reg_val; + + mutex_lock(&data->lock); + error = adp8870_read(data->client, reg, ®_val); + mutex_unlock(&data->lock); + + if (error < 0) + return error; + + return sprintf(buf, "%u\n", reg_val); +} + +static ssize_t adp8870_store(struct device *dev, const char *buf, + size_t count, int reg) +{ + struct adp8870_bl *data = dev_get_drvdata(dev); + unsigned long val; + int ret; + + ret = kstrtoul(buf, 10, &val); + if (ret) + return ret; + + mutex_lock(&data->lock); + adp8870_write(data->client, reg, val); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t adp8870_bl_l5_dark_max_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8870_show(dev, buf, ADP8870_BLMX5); +} + +static ssize_t adp8870_bl_l5_dark_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + return adp8870_store(dev, buf, count, ADP8870_BLMX5); +} +static DEVICE_ATTR(l5_dark_max, 0664, adp8870_bl_l5_dark_max_show, + adp8870_bl_l5_dark_max_store); + + +static ssize_t adp8870_bl_l4_indoor_max_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8870_show(dev, buf, ADP8870_BLMX4); +} + +static ssize_t adp8870_bl_l4_indoor_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + return adp8870_store(dev, buf, count, ADP8870_BLMX4); +} +static DEVICE_ATTR(l4_indoor_max, 0664, adp8870_bl_l4_indoor_max_show, + adp8870_bl_l4_indoor_max_store); + + +static ssize_t adp8870_bl_l3_office_max_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8870_show(dev, buf, ADP8870_BLMX3); +} + +static ssize_t adp8870_bl_l3_office_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + return adp8870_store(dev, buf, count, ADP8870_BLMX3); +} + +static DEVICE_ATTR(l3_office_max, 0664, adp8870_bl_l3_office_max_show, + adp8870_bl_l3_office_max_store); + +static ssize_t adp8870_bl_l2_bright_max_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8870_show(dev, buf, ADP8870_BLMX2); +} + +static ssize_t adp8870_bl_l2_bright_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + return adp8870_store(dev, buf, count, ADP8870_BLMX2); +} +static DEVICE_ATTR(l2_bright_max, 0664, adp8870_bl_l2_bright_max_show, + adp8870_bl_l2_bright_max_store); + +static ssize_t adp8870_bl_l1_daylight_max_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8870_show(dev, buf, ADP8870_BLMX1); +} + +static ssize_t adp8870_bl_l1_daylight_max_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct adp8870_bl *data = dev_get_drvdata(dev); + int ret = kstrtoul(buf, 10, &data->cached_daylight_max); + + if (ret) + return ret; + + return adp8870_store(dev, buf, count, ADP8870_BLMX1); +} +static DEVICE_ATTR(l1_daylight_max, 0664, adp8870_bl_l1_daylight_max_show, + adp8870_bl_l1_daylight_max_store); + +static ssize_t adp8870_bl_l5_dark_dim_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8870_show(dev, buf, ADP8870_BLDM5); +} + +static ssize_t adp8870_bl_l5_dark_dim_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return adp8870_store(dev, buf, count, ADP8870_BLDM5); +} +static DEVICE_ATTR(l5_dark_dim, 0664, adp8870_bl_l5_dark_dim_show, + adp8870_bl_l5_dark_dim_store); + +static ssize_t adp8870_bl_l4_indoor_dim_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8870_show(dev, buf, ADP8870_BLDM4); +} + +static ssize_t adp8870_bl_l4_indoor_dim_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return adp8870_store(dev, buf, count, ADP8870_BLDM4); +} +static DEVICE_ATTR(l4_indoor_dim, 0664, adp8870_bl_l4_indoor_dim_show, + adp8870_bl_l4_indoor_dim_store); + + +static ssize_t adp8870_bl_l3_office_dim_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8870_show(dev, buf, ADP8870_BLDM3); +} + +static ssize_t adp8870_bl_l3_office_dim_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return adp8870_store(dev, buf, count, ADP8870_BLDM3); +} +static DEVICE_ATTR(l3_office_dim, 0664, adp8870_bl_l3_office_dim_show, + adp8870_bl_l3_office_dim_store); + +static ssize_t adp8870_bl_l2_bright_dim_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8870_show(dev, buf, ADP8870_BLDM2); +} + +static ssize_t adp8870_bl_l2_bright_dim_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return adp8870_store(dev, buf, count, ADP8870_BLDM2); +} +static DEVICE_ATTR(l2_bright_dim, 0664, adp8870_bl_l2_bright_dim_show, + adp8870_bl_l2_bright_dim_store); + +static ssize_t adp8870_bl_l1_daylight_dim_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return adp8870_show(dev, buf, ADP8870_BLDM1); +} + +static ssize_t adp8870_bl_l1_daylight_dim_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + return adp8870_store(dev, buf, count, ADP8870_BLDM1); +} +static DEVICE_ATTR(l1_daylight_dim, 0664, adp8870_bl_l1_daylight_dim_show, + adp8870_bl_l1_daylight_dim_store); + +#ifdef ADP8870_EXT_FEATURES +static ssize_t adp8870_bl_ambient_light_level_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct adp8870_bl *data = dev_get_drvdata(dev); + int error; + uint8_t reg_val; + uint16_t ret_val; + + mutex_lock(&data->lock); + error = adp8870_read(data->client, ADP8870_PH1LEVL, ®_val); + if (error < 0) { + mutex_unlock(&data->lock); + return error; + } + ret_val = reg_val; + error = adp8870_read(data->client, ADP8870_PH1LEVH, ®_val); + mutex_unlock(&data->lock); + + if (error < 0) + return error; + + /* Return 13-bit conversion value for the first light sensor */ + ret_val += (reg_val & 0x1F) << 8; + + return sprintf(buf, "%u\n", ret_val); +} +static DEVICE_ATTR(ambient_light_level, 0444, + adp8870_bl_ambient_light_level_show, NULL); + +static ssize_t adp8870_bl_ambient_light_zone_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct adp8870_bl *data = dev_get_drvdata(dev); + int error; + uint8_t reg_val; + + mutex_lock(&data->lock); + error = adp8870_read(data->client, ADP8870_CFGR, ®_val); + mutex_unlock(&data->lock); + + if (error < 0) + return error; + + return sprintf(buf, "%u\n", + ((reg_val >> CFGR_BLV_SHIFT) & CFGR_BLV_MASK) + 1); +} + +static ssize_t adp8870_bl_ambient_light_zone_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct adp8870_bl *data = dev_get_drvdata(dev); + unsigned long val; + uint8_t reg_val; + int ret; + + ret = kstrtoul(buf, 10, &val); + if (ret) + return ret; + + if (val == 0) { + /* Enable automatic ambient light sensing */ + adp8870_set_bits(data->client, ADP8870_MDCR, CMP_AUTOEN); + } else if ((val > 0) && (val < 6)) { + /* Disable automatic ambient light sensing */ + adp8870_clr_bits(data->client, ADP8870_MDCR, CMP_AUTOEN); + + /* Set user supplied ambient light zone */ + mutex_lock(&data->lock); + ret = adp8870_read(data->client, ADP8870_CFGR, ®_val); + if (!ret) { + reg_val &= ~(CFGR_BLV_MASK << CFGR_BLV_SHIFT); + reg_val |= (val - 1) << CFGR_BLV_SHIFT; + adp8870_write(data->client, ADP8870_CFGR, reg_val); + } + mutex_unlock(&data->lock); + } + + return count; +} +static DEVICE_ATTR(ambient_light_zone, 0664, + adp8870_bl_ambient_light_zone_show, + adp8870_bl_ambient_light_zone_store); +#endif + +static struct attribute *adp8870_bl_attributes[] = { + &dev_attr_l5_dark_max.attr, + &dev_attr_l5_dark_dim.attr, + &dev_attr_l4_indoor_max.attr, + &dev_attr_l4_indoor_dim.attr, + &dev_attr_l3_office_max.attr, + &dev_attr_l3_office_dim.attr, + &dev_attr_l2_bright_max.attr, + &dev_attr_l2_bright_dim.attr, + &dev_attr_l1_daylight_max.attr, + &dev_attr_l1_daylight_dim.attr, +#ifdef ADP8870_EXT_FEATURES + &dev_attr_ambient_light_level.attr, + &dev_attr_ambient_light_zone.attr, +#endif + NULL +}; + +static const struct attribute_group adp8870_bl_attr_group = { + .attrs = adp8870_bl_attributes, +}; + +static int adp8870_probe(struct i2c_client *client) +{ + const struct i2c_device_id *id = i2c_client_get_device_id(client); + struct backlight_properties props; + struct backlight_device *bl; + struct adp8870_bl *data; + struct adp8870_backlight_platform_data *pdata = + dev_get_platdata(&client->dev); + uint8_t reg_val; + int ret; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_err(&client->dev, "SMBUS Byte Data not Supported\n"); + return -EIO; + } + + if (!pdata) { + dev_err(&client->dev, "no platform data?\n"); + return -EINVAL; + } + + ret = adp8870_read(client, ADP8870_MFDVID, ®_val); + if (ret < 0) + return -EIO; + + if (ADP8870_MANID(reg_val) != ADP8870_MANUFID) { + dev_err(&client->dev, "failed to probe\n"); + return -ENODEV; + } + + data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); + if (data == NULL) + return -ENOMEM; + + data->revid = ADP8870_DEVID(reg_val); + data->client = client; + data->pdata = pdata; + data->id = id->driver_data; + data->current_brightness = 0; + i2c_set_clientdata(client, data); + + mutex_init(&data->lock); + + memset(&props, 0, sizeof(props)); + props.type = BACKLIGHT_RAW; + props.max_brightness = props.brightness = ADP8870_MAX_BRIGHTNESS; + bl = devm_backlight_device_register(&client->dev, + dev_driver_string(&client->dev), + &client->dev, data, &adp8870_bl_ops, &props); + if (IS_ERR(bl)) { + dev_err(&client->dev, "failed to register backlight\n"); + return PTR_ERR(bl); + } + + data->bl = bl; + + if (pdata->en_ambl_sens) { + ret = sysfs_create_group(&bl->dev.kobj, + &adp8870_bl_attr_group); + if (ret) { + dev_err(&client->dev, "failed to register sysfs\n"); + return ret; + } + } + + ret = adp8870_bl_setup(bl); + if (ret) { + ret = -EIO; + goto out; + } + + backlight_update_status(bl); + + dev_info(&client->dev, "Rev.%d Backlight\n", data->revid); + + if (pdata->num_leds) + adp8870_led_probe(client); + + return 0; + +out: + if (data->pdata->en_ambl_sens) + sysfs_remove_group(&data->bl->dev.kobj, + &adp8870_bl_attr_group); + + return ret; +} + +static void adp8870_remove(struct i2c_client *client) +{ + struct adp8870_bl *data = i2c_get_clientdata(client); + + adp8870_clr_bits(client, ADP8870_MDCR, NSTBY); + + if (data->led) + adp8870_led_remove(client); + + if (data->pdata->en_ambl_sens) + sysfs_remove_group(&data->bl->dev.kobj, + &adp8870_bl_attr_group); +} + +#ifdef CONFIG_PM_SLEEP +static int adp8870_i2c_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + adp8870_clr_bits(client, ADP8870_MDCR, NSTBY); + + return 0; +} + +static int adp8870_i2c_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + adp8870_set_bits(client, ADP8870_MDCR, NSTBY | BLEN); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(adp8870_i2c_pm_ops, adp8870_i2c_suspend, + adp8870_i2c_resume); + +static const struct i2c_device_id adp8870_id[] = { + { "adp8870", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adp8870_id); + +static struct i2c_driver adp8870_driver = { + .driver = { + .name = KBUILD_MODNAME, + .pm = &adp8870_i2c_pm_ops, + }, + .probe = adp8870_probe, + .remove = adp8870_remove, + .id_table = adp8870_id, +}; + +module_i2c_driver(adp8870_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); +MODULE_DESCRIPTION("ADP8870 Backlight driver"); diff --git a/drivers/video/backlight/ams369fg06.c b/drivers/video/backlight/ams369fg06.c new file mode 100644 index 0000000000..522dd81110 --- /dev/null +++ b/drivers/video/backlight/ams369fg06.c @@ -0,0 +1,564 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * ams369fg06 AMOLED LCD panel driver. + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * Author: Jingoo Han <jg1.han@samsung.com> + * + * Derived from drivers/video/s6e63m0.c + */ + +#include <linux/backlight.h> +#include <linux/delay.h> +#include <linux/fb.h> +#include <linux/lcd.h> +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/wait.h> + +#define SLEEPMSEC 0x1000 +#define ENDDEF 0x2000 +#define DEFMASK 0xFF00 +#define COMMAND_ONLY 0xFE +#define DATA_ONLY 0xFF + +#define MAX_GAMMA_LEVEL 5 +#define GAMMA_TABLE_COUNT 21 + +#define MIN_BRIGHTNESS 0 +#define MAX_BRIGHTNESS 255 +#define DEFAULT_BRIGHTNESS 150 + +struct ams369fg06 { + struct device *dev; + struct spi_device *spi; + unsigned int power; + struct lcd_device *ld; + struct backlight_device *bd; + struct lcd_platform_data *lcd_pd; +}; + +static const unsigned short seq_display_on[] = { + 0x14, 0x03, + ENDDEF, 0x0000 +}; + +static const unsigned short seq_display_off[] = { + 0x14, 0x00, + ENDDEF, 0x0000 +}; + +static const unsigned short seq_stand_by_on[] = { + 0x1D, 0xA1, + SLEEPMSEC, 200, + ENDDEF, 0x0000 +}; + +static const unsigned short seq_stand_by_off[] = { + 0x1D, 0xA0, + SLEEPMSEC, 250, + ENDDEF, 0x0000 +}; + +static const unsigned short seq_setting[] = { + 0x31, 0x08, + 0x32, 0x14, + 0x30, 0x02, + 0x27, 0x01, + 0x12, 0x08, + 0x13, 0x08, + 0x15, 0x00, + 0x16, 0x00, + + 0xef, 0xd0, + DATA_ONLY, 0xe8, + + 0x39, 0x44, + 0x40, 0x00, + 0x41, 0x3f, + 0x42, 0x2a, + 0x43, 0x27, + 0x44, 0x27, + 0x45, 0x1f, + 0x46, 0x44, + 0x50, 0x00, + 0x51, 0x00, + 0x52, 0x17, + 0x53, 0x24, + 0x54, 0x26, + 0x55, 0x1f, + 0x56, 0x43, + 0x60, 0x00, + 0x61, 0x3f, + 0x62, 0x2a, + 0x63, 0x25, + 0x64, 0x24, + 0x65, 0x1b, + 0x66, 0x5c, + + 0x17, 0x22, + 0x18, 0x33, + 0x19, 0x03, + 0x1a, 0x01, + 0x22, 0xa4, + 0x23, 0x00, + 0x26, 0xa0, + + 0x1d, 0xa0, + SLEEPMSEC, 300, + + 0x14, 0x03, + + ENDDEF, 0x0000 +}; + +/* gamma value: 2.2 */ +static const unsigned int ams369fg06_22_250[] = { + 0x00, 0x3f, 0x2a, 0x27, 0x27, 0x1f, 0x44, + 0x00, 0x00, 0x17, 0x24, 0x26, 0x1f, 0x43, + 0x00, 0x3f, 0x2a, 0x25, 0x24, 0x1b, 0x5c, +}; + +static const unsigned int ams369fg06_22_200[] = { + 0x00, 0x3f, 0x28, 0x29, 0x27, 0x21, 0x3e, + 0x00, 0x00, 0x10, 0x25, 0x27, 0x20, 0x3d, + 0x00, 0x3f, 0x28, 0x27, 0x25, 0x1d, 0x53, +}; + +static const unsigned int ams369fg06_22_150[] = { + 0x00, 0x3f, 0x2d, 0x29, 0x28, 0x23, 0x37, + 0x00, 0x00, 0x0b, 0x25, 0x28, 0x22, 0x36, + 0x00, 0x3f, 0x2b, 0x28, 0x26, 0x1f, 0x4a, +}; + +static const unsigned int ams369fg06_22_100[] = { + 0x00, 0x3f, 0x30, 0x2a, 0x2b, 0x24, 0x2f, + 0x00, 0x00, 0x00, 0x25, 0x29, 0x24, 0x2e, + 0x00, 0x3f, 0x2f, 0x29, 0x29, 0x21, 0x3f, +}; + +static const unsigned int ams369fg06_22_50[] = { + 0x00, 0x3f, 0x3c, 0x2c, 0x2d, 0x27, 0x24, + 0x00, 0x00, 0x00, 0x22, 0x2a, 0x27, 0x23, + 0x00, 0x3f, 0x3b, 0x2c, 0x2b, 0x24, 0x31, +}; + +struct ams369fg06_gamma { + unsigned int *gamma_22_table[MAX_GAMMA_LEVEL]; +}; + +static struct ams369fg06_gamma gamma_table = { + .gamma_22_table[0] = (unsigned int *)&ams369fg06_22_50, + .gamma_22_table[1] = (unsigned int *)&ams369fg06_22_100, + .gamma_22_table[2] = (unsigned int *)&ams369fg06_22_150, + .gamma_22_table[3] = (unsigned int *)&ams369fg06_22_200, + .gamma_22_table[4] = (unsigned int *)&ams369fg06_22_250, +}; + +static int ams369fg06_spi_write_byte(struct ams369fg06 *lcd, int addr, int data) +{ + u16 buf[1]; + struct spi_message msg; + + struct spi_transfer xfer = { + .len = 2, + .tx_buf = buf, + }; + + buf[0] = (addr << 8) | data; + + spi_message_init(&msg); + spi_message_add_tail(&xfer, &msg); + + return spi_sync(lcd->spi, &msg); +} + +static int ams369fg06_spi_write(struct ams369fg06 *lcd, unsigned char address, + unsigned char command) +{ + int ret = 0; + + if (address != DATA_ONLY) + ret = ams369fg06_spi_write_byte(lcd, 0x70, address); + if (command != COMMAND_ONLY) + ret = ams369fg06_spi_write_byte(lcd, 0x72, command); + + return ret; +} + +static int ams369fg06_panel_send_sequence(struct ams369fg06 *lcd, + const unsigned short *wbuf) +{ + int ret = 0, i = 0; + + while ((wbuf[i] & DEFMASK) != ENDDEF) { + if ((wbuf[i] & DEFMASK) != SLEEPMSEC) { + ret = ams369fg06_spi_write(lcd, wbuf[i], wbuf[i+1]); + if (ret) + break; + } else { + msleep(wbuf[i+1]); + } + i += 2; + } + + return ret; +} + +static int _ams369fg06_gamma_ctl(struct ams369fg06 *lcd, + const unsigned int *gamma) +{ + unsigned int i = 0; + int ret = 0; + + for (i = 0 ; i < GAMMA_TABLE_COUNT / 3; i++) { + ret = ams369fg06_spi_write(lcd, 0x40 + i, gamma[i]); + ret = ams369fg06_spi_write(lcd, 0x50 + i, gamma[i+7*1]); + ret = ams369fg06_spi_write(lcd, 0x60 + i, gamma[i+7*2]); + if (ret) { + dev_err(lcd->dev, "failed to set gamma table.\n"); + goto gamma_err; + } + } + +gamma_err: + return ret; +} + +static int ams369fg06_gamma_ctl(struct ams369fg06 *lcd, int brightness) +{ + int ret = 0; + int gamma = 0; + + if ((brightness >= 0) && (brightness <= 50)) + gamma = 0; + else if ((brightness > 50) && (brightness <= 100)) + gamma = 1; + else if ((brightness > 100) && (brightness <= 150)) + gamma = 2; + else if ((brightness > 150) && (brightness <= 200)) + gamma = 3; + else if ((brightness > 200) && (brightness <= 255)) + gamma = 4; + + ret = _ams369fg06_gamma_ctl(lcd, gamma_table.gamma_22_table[gamma]); + + return ret; +} + +static int ams369fg06_ldi_init(struct ams369fg06 *lcd) +{ + int ret, i; + static const unsigned short *init_seq[] = { + seq_setting, + seq_stand_by_off, + }; + + for (i = 0; i < ARRAY_SIZE(init_seq); i++) { + ret = ams369fg06_panel_send_sequence(lcd, init_seq[i]); + if (ret) + break; + } + + return ret; +} + +static int ams369fg06_ldi_enable(struct ams369fg06 *lcd) +{ + int ret, i; + static const unsigned short *init_seq[] = { + seq_stand_by_off, + seq_display_on, + }; + + for (i = 0; i < ARRAY_SIZE(init_seq); i++) { + ret = ams369fg06_panel_send_sequence(lcd, init_seq[i]); + if (ret) + break; + } + + return ret; +} + +static int ams369fg06_ldi_disable(struct ams369fg06 *lcd) +{ + int ret, i; + + static const unsigned short *init_seq[] = { + seq_display_off, + seq_stand_by_on, + }; + + for (i = 0; i < ARRAY_SIZE(init_seq); i++) { + ret = ams369fg06_panel_send_sequence(lcd, init_seq[i]); + if (ret) + break; + } + + return ret; +} + +static int ams369fg06_power_is_on(int power) +{ + return power <= FB_BLANK_NORMAL; +} + +static int ams369fg06_power_on(struct ams369fg06 *lcd) +{ + int ret = 0; + struct lcd_platform_data *pd; + struct backlight_device *bd; + + pd = lcd->lcd_pd; + bd = lcd->bd; + + if (pd->power_on) { + pd->power_on(lcd->ld, 1); + msleep(pd->power_on_delay); + } + + if (!pd->reset) { + dev_err(lcd->dev, "reset is NULL.\n"); + return -EINVAL; + } + + pd->reset(lcd->ld); + msleep(pd->reset_delay); + + ret = ams369fg06_ldi_init(lcd); + if (ret) { + dev_err(lcd->dev, "failed to initialize ldi.\n"); + return ret; + } + + ret = ams369fg06_ldi_enable(lcd); + if (ret) { + dev_err(lcd->dev, "failed to enable ldi.\n"); + return ret; + } + + /* set brightness to current value after power on or resume. */ + ret = ams369fg06_gamma_ctl(lcd, bd->props.brightness); + if (ret) { + dev_err(lcd->dev, "lcd gamma setting failed.\n"); + return ret; + } + + return 0; +} + +static int ams369fg06_power_off(struct ams369fg06 *lcd) +{ + int ret; + struct lcd_platform_data *pd; + + pd = lcd->lcd_pd; + + ret = ams369fg06_ldi_disable(lcd); + if (ret) { + dev_err(lcd->dev, "lcd setting failed.\n"); + return -EIO; + } + + msleep(pd->power_off_delay); + + if (pd->power_on) + pd->power_on(lcd->ld, 0); + + return 0; +} + +static int ams369fg06_power(struct ams369fg06 *lcd, int power) +{ + int ret = 0; + + if (ams369fg06_power_is_on(power) && + !ams369fg06_power_is_on(lcd->power)) + ret = ams369fg06_power_on(lcd); + else if (!ams369fg06_power_is_on(power) && + ams369fg06_power_is_on(lcd->power)) + ret = ams369fg06_power_off(lcd); + + if (!ret) + lcd->power = power; + + return ret; +} + +static int ams369fg06_get_power(struct lcd_device *ld) +{ + struct ams369fg06 *lcd = lcd_get_data(ld); + + return lcd->power; +} + +static int ams369fg06_set_power(struct lcd_device *ld, int power) +{ + struct ams369fg06 *lcd = lcd_get_data(ld); + + if (power != FB_BLANK_UNBLANK && power != FB_BLANK_POWERDOWN && + power != FB_BLANK_NORMAL) { + dev_err(lcd->dev, "power value should be 0, 1 or 4.\n"); + return -EINVAL; + } + + return ams369fg06_power(lcd, power); +} + +static int ams369fg06_set_brightness(struct backlight_device *bd) +{ + int ret = 0; + int brightness = bd->props.brightness; + struct ams369fg06 *lcd = bl_get_data(bd); + + if (brightness < MIN_BRIGHTNESS || + brightness > bd->props.max_brightness) { + dev_err(&bd->dev, "lcd brightness should be %d to %d.\n", + MIN_BRIGHTNESS, MAX_BRIGHTNESS); + return -EINVAL; + } + + ret = ams369fg06_gamma_ctl(lcd, bd->props.brightness); + if (ret) { + dev_err(&bd->dev, "lcd brightness setting failed.\n"); + return -EIO; + } + + return ret; +} + +static struct lcd_ops ams369fg06_lcd_ops = { + .get_power = ams369fg06_get_power, + .set_power = ams369fg06_set_power, +}; + +static const struct backlight_ops ams369fg06_backlight_ops = { + .update_status = ams369fg06_set_brightness, +}; + +static int ams369fg06_probe(struct spi_device *spi) +{ + int ret = 0; + struct ams369fg06 *lcd = NULL; + struct lcd_device *ld = NULL; + struct backlight_device *bd = NULL; + struct backlight_properties props; + + lcd = devm_kzalloc(&spi->dev, sizeof(struct ams369fg06), GFP_KERNEL); + if (!lcd) + return -ENOMEM; + + /* ams369fg06 lcd panel uses 3-wire 16bits SPI Mode. */ + spi->bits_per_word = 16; + + ret = spi_setup(spi); + if (ret < 0) { + dev_err(&spi->dev, "spi setup failed.\n"); + return ret; + } + + lcd->spi = spi; + lcd->dev = &spi->dev; + + lcd->lcd_pd = dev_get_platdata(&spi->dev); + if (!lcd->lcd_pd) { + dev_err(&spi->dev, "platform data is NULL\n"); + return -EINVAL; + } + + ld = devm_lcd_device_register(&spi->dev, "ams369fg06", &spi->dev, lcd, + &ams369fg06_lcd_ops); + if (IS_ERR(ld)) + return PTR_ERR(ld); + + lcd->ld = ld; + + memset(&props, 0, sizeof(struct backlight_properties)); + props.type = BACKLIGHT_RAW; + props.max_brightness = MAX_BRIGHTNESS; + + bd = devm_backlight_device_register(&spi->dev, "ams369fg06-bl", + &spi->dev, lcd, + &ams369fg06_backlight_ops, &props); + if (IS_ERR(bd)) + return PTR_ERR(bd); + + bd->props.brightness = DEFAULT_BRIGHTNESS; + lcd->bd = bd; + + if (!lcd->lcd_pd->lcd_enabled) { + /* + * if lcd panel was off from bootloader then + * current lcd status is powerdown and then + * it enables lcd panel. + */ + lcd->power = FB_BLANK_POWERDOWN; + + ams369fg06_power(lcd, FB_BLANK_UNBLANK); + } else { + lcd->power = FB_BLANK_UNBLANK; + } + + spi_set_drvdata(spi, lcd); + + dev_info(&spi->dev, "ams369fg06 panel driver has been probed.\n"); + + return 0; +} + +static void ams369fg06_remove(struct spi_device *spi) +{ + struct ams369fg06 *lcd = spi_get_drvdata(spi); + + ams369fg06_power(lcd, FB_BLANK_POWERDOWN); +} + +#ifdef CONFIG_PM_SLEEP +static int ams369fg06_suspend(struct device *dev) +{ + struct ams369fg06 *lcd = dev_get_drvdata(dev); + + dev_dbg(dev, "lcd->power = %d\n", lcd->power); + + /* + * when lcd panel is suspend, lcd panel becomes off + * regardless of status. + */ + return ams369fg06_power(lcd, FB_BLANK_POWERDOWN); +} + +static int ams369fg06_resume(struct device *dev) +{ + struct ams369fg06 *lcd = dev_get_drvdata(dev); + + lcd->power = FB_BLANK_POWERDOWN; + + return ams369fg06_power(lcd, FB_BLANK_UNBLANK); +} +#endif + +static SIMPLE_DEV_PM_OPS(ams369fg06_pm_ops, ams369fg06_suspend, + ams369fg06_resume); + +static void ams369fg06_shutdown(struct spi_device *spi) +{ + struct ams369fg06 *lcd = spi_get_drvdata(spi); + + ams369fg06_power(lcd, FB_BLANK_POWERDOWN); +} + +static struct spi_driver ams369fg06_driver = { + .driver = { + .name = "ams369fg06", + .pm = &ams369fg06_pm_ops, + }, + .probe = ams369fg06_probe, + .remove = ams369fg06_remove, + .shutdown = ams369fg06_shutdown, +}; + +module_spi_driver(ams369fg06_driver); + +MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>"); +MODULE_DESCRIPTION("ams369fg06 LCD Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/backlight/apple_bl.c b/drivers/video/backlight/apple_bl.c new file mode 100644 index 0000000000..aaa824437a --- /dev/null +++ b/drivers/video/backlight/apple_bl.c @@ -0,0 +1,242 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Backlight Driver for Intel-based Apples + * + * Copyright (c) Red Hat <mjg@redhat.com> + * Based on code from Pommed: + * Copyright (C) 2006 Nicolas Boichat <nicolas @boichat.ch> + * Copyright (C) 2006 Felipe Alfaro Solana <felipe_alfaro @linuxmail.org> + * Copyright (C) 2007 Julien BLACHE <jb@jblache.org> + * + * This driver triggers SMIs which cause the firmware to change the + * backlight brightness. This is icky in many ways, but it's impractical to + * get at the firmware code in order to figure out what it's actually doing. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/backlight.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/pci.h> +#include <linux/acpi.h> +#include <linux/atomic.h> +#include <acpi/video.h> + +static struct backlight_device *apple_backlight_device; + +struct hw_data { + /* I/O resource to allocate. */ + unsigned long iostart; + unsigned long iolen; + /* Backlight operations structure. */ + const struct backlight_ops backlight_ops; + void (*set_brightness)(int); +}; + +static const struct hw_data *hw_data; + +/* Module parameters. */ +static int debug; +module_param_named(debug, debug, int, 0644); +MODULE_PARM_DESC(debug, "Set to one to enable debugging messages."); + +/* + * Implementation for machines with Intel chipset. + */ +static void intel_chipset_set_brightness(int intensity) +{ + outb(0x04 | (intensity << 4), 0xb3); + outb(0xbf, 0xb2); +} + +static int intel_chipset_send_intensity(struct backlight_device *bd) +{ + int intensity = bd->props.brightness; + + if (debug) + pr_debug("setting brightness to %d\n", intensity); + + intel_chipset_set_brightness(intensity); + return 0; +} + +static int intel_chipset_get_intensity(struct backlight_device *bd) +{ + int intensity; + + outb(0x03, 0xb3); + outb(0xbf, 0xb2); + intensity = inb(0xb3) >> 4; + + if (debug) + pr_debug("read brightness of %d\n", intensity); + + return intensity; +} + +static const struct hw_data intel_chipset_data = { + .iostart = 0xb2, + .iolen = 2, + .backlight_ops = { + .options = BL_CORE_SUSPENDRESUME, + .get_brightness = intel_chipset_get_intensity, + .update_status = intel_chipset_send_intensity, + }, + .set_brightness = intel_chipset_set_brightness, +}; + +/* + * Implementation for machines with Nvidia chipset. + */ +static void nvidia_chipset_set_brightness(int intensity) +{ + outb(0x04 | (intensity << 4), 0x52f); + outb(0xbf, 0x52e); +} + +static int nvidia_chipset_send_intensity(struct backlight_device *bd) +{ + int intensity = bd->props.brightness; + + if (debug) + pr_debug("setting brightness to %d\n", intensity); + + nvidia_chipset_set_brightness(intensity); + return 0; +} + +static int nvidia_chipset_get_intensity(struct backlight_device *bd) +{ + int intensity; + + outb(0x03, 0x52f); + outb(0xbf, 0x52e); + intensity = inb(0x52f) >> 4; + + if (debug) + pr_debug("read brightness of %d\n", intensity); + + return intensity; +} + +static const struct hw_data nvidia_chipset_data = { + .iostart = 0x52e, + .iolen = 2, + .backlight_ops = { + .options = BL_CORE_SUSPENDRESUME, + .get_brightness = nvidia_chipset_get_intensity, + .update_status = nvidia_chipset_send_intensity + }, + .set_brightness = nvidia_chipset_set_brightness, +}; + +static int apple_bl_add(struct acpi_device *dev) +{ + struct backlight_properties props; + struct pci_dev *host; + int intensity; + + host = pci_get_domain_bus_and_slot(0, 0, 0); + + if (!host) { + pr_err("unable to find PCI host\n"); + return -ENODEV; + } + + if (host->vendor == PCI_VENDOR_ID_INTEL) + hw_data = &intel_chipset_data; + else if (host->vendor == PCI_VENDOR_ID_NVIDIA) + hw_data = &nvidia_chipset_data; + + pci_dev_put(host); + + if (!hw_data) { + pr_err("unknown hardware\n"); + return -ENODEV; + } + + /* Check that the hardware responds - this may not work under EFI */ + + intensity = hw_data->backlight_ops.get_brightness(NULL); + + if (!intensity) { + hw_data->set_brightness(1); + if (!hw_data->backlight_ops.get_brightness(NULL)) + return -ENODEV; + + hw_data->set_brightness(0); + } + + if (!request_region(hw_data->iostart, hw_data->iolen, + "Apple backlight")) + return -ENXIO; + + memset(&props, 0, sizeof(struct backlight_properties)); + props.type = BACKLIGHT_PLATFORM; + props.max_brightness = 15; + apple_backlight_device = backlight_device_register("apple_backlight", + NULL, NULL, &hw_data->backlight_ops, &props); + + if (IS_ERR(apple_backlight_device)) { + release_region(hw_data->iostart, hw_data->iolen); + return PTR_ERR(apple_backlight_device); + } + + apple_backlight_device->props.brightness = + hw_data->backlight_ops.get_brightness(apple_backlight_device); + backlight_update_status(apple_backlight_device); + + return 0; +} + +static void apple_bl_remove(struct acpi_device *dev) +{ + backlight_device_unregister(apple_backlight_device); + + release_region(hw_data->iostart, hw_data->iolen); + hw_data = NULL; +} + +static const struct acpi_device_id apple_bl_ids[] = { + {"APP0002", 0}, + {"", 0}, +}; + +static struct acpi_driver apple_bl_driver = { + .name = "Apple backlight", + .ids = apple_bl_ids, + .ops = { + .add = apple_bl_add, + .remove = apple_bl_remove, + }, +}; + +static int __init apple_bl_init(void) +{ + /* + * Use ACPI video detection code to see if this driver should register + * or if another driver, e.g. the apple-gmux driver should be used. + */ + if (acpi_video_get_backlight_type() != acpi_backlight_vendor) + return -ENODEV; + + return acpi_bus_register_driver(&apple_bl_driver); +} + +static void __exit apple_bl_exit(void) +{ + acpi_bus_unregister_driver(&apple_bl_driver); +} + +module_init(apple_bl_init); +module_exit(apple_bl_exit); + +MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>"); +MODULE_DESCRIPTION("Apple Backlight Driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(acpi, apple_bl_ids); +MODULE_ALIAS("mbp_nvidia_bl"); diff --git a/drivers/video/backlight/arcxcnn_bl.c b/drivers/video/backlight/arcxcnn_bl.c new file mode 100644 index 0000000000..1d5a570cfe --- /dev/null +++ b/drivers/video/backlight/arcxcnn_bl.c @@ -0,0 +1,403 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Backlight driver for ArcticSand ARC_X_C_0N_0N Devices + * + * Copyright 2016 ArcticSand, Inc. + * Author : Brian Dodge <bdodge@arcticsand.com> + */ + +#include <linux/backlight.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/slab.h> + +enum arcxcnn_chip_id { + ARC2C0608 +}; + +/** + * struct arcxcnn_platform_data + * @name : Backlight driver name (NULL will use default) + * @initial_brightness : initial value of backlight brightness + * @leden : initial LED string enables, upper bit is global on/off + * @led_config_0 : fading speed (period between intensity steps) + * @led_config_1 : misc settings, see datasheet + * @dim_freq : pwm dimming frequency if in pwm mode + * @comp_config : misc config, see datasheet + * @filter_config : RC/PWM filter config, see datasheet + * @trim_config : full scale current trim, see datasheet + */ +struct arcxcnn_platform_data { + const char *name; + u16 initial_brightness; + u8 leden; + u8 led_config_0; + u8 led_config_1; + u8 dim_freq; + u8 comp_config; + u8 filter_config; + u8 trim_config; +}; + +#define ARCXCNN_CMD 0x00 /* Command Register */ +#define ARCXCNN_CMD_STDBY 0x80 /* I2C Standby */ +#define ARCXCNN_CMD_RESET 0x40 /* Reset */ +#define ARCXCNN_CMD_BOOST 0x10 /* Boost */ +#define ARCXCNN_CMD_OVP_MASK 0x0C /* --- Over Voltage Threshold */ +#define ARCXCNN_CMD_OVP_XXV 0x0C /* <rsvrd> Over Voltage Threshold */ +#define ARCXCNN_CMD_OVP_20V 0x08 /* 20v Over Voltage Threshold */ +#define ARCXCNN_CMD_OVP_24V 0x04 /* 24v Over Voltage Threshold */ +#define ARCXCNN_CMD_OVP_31V 0x00 /* 31.4v Over Voltage Threshold */ +#define ARCXCNN_CMD_EXT_COMP 0x01 /* part (0) or full (1) ext. comp */ + +#define ARCXCNN_CONFIG 0x01 /* Configuration */ +#define ARCXCNN_STATUS1 0x02 /* Status 1 */ +#define ARCXCNN_STATUS2 0x03 /* Status 2 */ +#define ARCXCNN_FADECTRL 0x04 /* Fading Control */ +#define ARCXCNN_ILED_CONFIG 0x05 /* ILED Configuration */ +#define ARCXCNN_ILED_DIM_PWM 0x00 /* config dim mode pwm */ +#define ARCXCNN_ILED_DIM_INT 0x04 /* config dim mode internal */ +#define ARCXCNN_LEDEN 0x06 /* LED Enable Register */ +#define ARCXCNN_LEDEN_ISETEXT 0x80 /* Full-scale current set extern */ +#define ARCXCNN_LEDEN_MASK 0x3F /* LED string enables mask */ +#define ARCXCNN_LEDEN_BITS 0x06 /* Bits of LED string enables */ +#define ARCXCNN_LEDEN_LED1 0x01 +#define ARCXCNN_LEDEN_LED2 0x02 +#define ARCXCNN_LEDEN_LED3 0x04 +#define ARCXCNN_LEDEN_LED4 0x08 +#define ARCXCNN_LEDEN_LED5 0x10 +#define ARCXCNN_LEDEN_LED6 0x20 + +#define ARCXCNN_WLED_ISET_LSB 0x07 /* LED ISET LSB (in upper nibble) */ +#define ARCXCNN_WLED_ISET_LSB_SHIFT 0x04 /* ISET LSB Left Shift */ +#define ARCXCNN_WLED_ISET_MSB 0x08 /* LED ISET MSB (8 bits) */ + +#define ARCXCNN_DIMFREQ 0x09 +#define ARCXCNN_COMP_CONFIG 0x0A +#define ARCXCNN_FILT_CONFIG 0x0B +#define ARCXCNN_IMAXTUNE 0x0C +#define ARCXCNN_ID_MSB 0x1E +#define ARCXCNN_ID_LSB 0x1F + +#define MAX_BRIGHTNESS 4095 +#define INIT_BRIGHT 60 + +struct arcxcnn { + struct i2c_client *client; + struct backlight_device *bl; + struct device *dev; + struct arcxcnn_platform_data *pdata; +}; + +static int arcxcnn_update_field(struct arcxcnn *lp, u8 reg, u8 mask, u8 data) +{ + int ret; + u8 tmp; + + ret = i2c_smbus_read_byte_data(lp->client, reg); + if (ret < 0) { + dev_err(lp->dev, "failed to read 0x%.2x\n", reg); + return ret; + } + + tmp = (u8)ret; + tmp &= ~mask; + tmp |= data & mask; + + return i2c_smbus_write_byte_data(lp->client, reg, tmp); +} + +static int arcxcnn_set_brightness(struct arcxcnn *lp, u32 brightness) +{ + int ret; + u8 val; + + /* lower nibble of brightness goes in upper nibble of LSB register */ + val = (brightness & 0xF) << ARCXCNN_WLED_ISET_LSB_SHIFT; + ret = i2c_smbus_write_byte_data(lp->client, + ARCXCNN_WLED_ISET_LSB, val); + if (ret < 0) + return ret; + + /* remaining 8 bits of brightness go in MSB register */ + val = (brightness >> 4); + return i2c_smbus_write_byte_data(lp->client, + ARCXCNN_WLED_ISET_MSB, val); +} + +static int arcxcnn_bl_update_status(struct backlight_device *bl) +{ + struct arcxcnn *lp = bl_get_data(bl); + u32 brightness = backlight_get_brightness(bl); + int ret; + + ret = arcxcnn_set_brightness(lp, brightness); + if (ret) + return ret; + + /* set power-on/off/save modes */ + return arcxcnn_update_field(lp, ARCXCNN_CMD, ARCXCNN_CMD_STDBY, + (bl->props.power == 0) ? 0 : ARCXCNN_CMD_STDBY); +} + +static const struct backlight_ops arcxcnn_bl_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = arcxcnn_bl_update_status, +}; + +static int arcxcnn_backlight_register(struct arcxcnn *lp) +{ + struct backlight_properties *props; + const char *name = lp->pdata->name ? : "arctic_bl"; + + props = devm_kzalloc(lp->dev, sizeof(*props), GFP_KERNEL); + if (!props) + return -ENOMEM; + + props->type = BACKLIGHT_PLATFORM; + props->max_brightness = MAX_BRIGHTNESS; + + if (lp->pdata->initial_brightness > props->max_brightness) + lp->pdata->initial_brightness = props->max_brightness; + + props->brightness = lp->pdata->initial_brightness; + + lp->bl = devm_backlight_device_register(lp->dev, name, lp->dev, lp, + &arcxcnn_bl_ops, props); + return PTR_ERR_OR_ZERO(lp->bl); +} + +static void arcxcnn_parse_dt(struct arcxcnn *lp) +{ + struct device *dev = lp->dev; + struct device_node *node = dev->of_node; + u32 prog_val, num_entry, entry, sources[ARCXCNN_LEDEN_BITS]; + int ret; + + /* device tree entry isn't required, defaults are OK */ + if (!node) + return; + + ret = of_property_read_string(node, "label", &lp->pdata->name); + if (ret < 0) + lp->pdata->name = NULL; + + ret = of_property_read_u32(node, "default-brightness", &prog_val); + if (ret == 0) + lp->pdata->initial_brightness = prog_val; + + ret = of_property_read_u32(node, "arc,led-config-0", &prog_val); + if (ret == 0) + lp->pdata->led_config_0 = (u8)prog_val; + + ret = of_property_read_u32(node, "arc,led-config-1", &prog_val); + if (ret == 0) + lp->pdata->led_config_1 = (u8)prog_val; + + ret = of_property_read_u32(node, "arc,dim-freq", &prog_val); + if (ret == 0) + lp->pdata->dim_freq = (u8)prog_val; + + ret = of_property_read_u32(node, "arc,comp-config", &prog_val); + if (ret == 0) + lp->pdata->comp_config = (u8)prog_val; + + ret = of_property_read_u32(node, "arc,filter-config", &prog_val); + if (ret == 0) + lp->pdata->filter_config = (u8)prog_val; + + ret = of_property_read_u32(node, "arc,trim-config", &prog_val); + if (ret == 0) + lp->pdata->trim_config = (u8)prog_val; + + ret = of_property_count_u32_elems(node, "led-sources"); + if (ret < 0) { + lp->pdata->leden = ARCXCNN_LEDEN_MASK; /* all on is default */ + } else { + num_entry = ret; + if (num_entry > ARCXCNN_LEDEN_BITS) + num_entry = ARCXCNN_LEDEN_BITS; + + ret = of_property_read_u32_array(node, "led-sources", sources, + num_entry); + if (ret < 0) { + dev_err(dev, "led-sources node is invalid.\n"); + return; + } + + lp->pdata->leden = 0; + + /* for each enable in source, set bit in led enable */ + for (entry = 0; entry < num_entry; entry++) { + u8 onbit = 1 << sources[entry]; + + lp->pdata->leden |= onbit; + } + } +} + +static int arcxcnn_probe(struct i2c_client *cl) +{ + struct arcxcnn *lp; + int ret; + + if (!i2c_check_functionality(cl->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + lp = devm_kzalloc(&cl->dev, sizeof(*lp), GFP_KERNEL); + if (!lp) + return -ENOMEM; + + lp->client = cl; + lp->dev = &cl->dev; + lp->pdata = dev_get_platdata(&cl->dev); + + /* reset the device */ + ret = i2c_smbus_write_byte_data(lp->client, + ARCXCNN_CMD, ARCXCNN_CMD_RESET); + if (ret) + goto probe_err; + + if (!lp->pdata) { + lp->pdata = devm_kzalloc(lp->dev, + sizeof(*lp->pdata), GFP_KERNEL); + if (!lp->pdata) + return -ENOMEM; + + /* Setup defaults based on power-on defaults */ + lp->pdata->name = NULL; + lp->pdata->initial_brightness = INIT_BRIGHT; + lp->pdata->leden = ARCXCNN_LEDEN_MASK; + + lp->pdata->led_config_0 = i2c_smbus_read_byte_data( + lp->client, ARCXCNN_FADECTRL); + + lp->pdata->led_config_1 = i2c_smbus_read_byte_data( + lp->client, ARCXCNN_ILED_CONFIG); + /* insure dim mode is not default pwm */ + lp->pdata->led_config_1 |= ARCXCNN_ILED_DIM_INT; + + lp->pdata->dim_freq = i2c_smbus_read_byte_data( + lp->client, ARCXCNN_DIMFREQ); + + lp->pdata->comp_config = i2c_smbus_read_byte_data( + lp->client, ARCXCNN_COMP_CONFIG); + + lp->pdata->filter_config = i2c_smbus_read_byte_data( + lp->client, ARCXCNN_FILT_CONFIG); + + lp->pdata->trim_config = i2c_smbus_read_byte_data( + lp->client, ARCXCNN_IMAXTUNE); + + if (IS_ENABLED(CONFIG_OF)) + arcxcnn_parse_dt(lp); + } + + i2c_set_clientdata(cl, lp); + + /* constrain settings to what is possible */ + if (lp->pdata->initial_brightness > MAX_BRIGHTNESS) + lp->pdata->initial_brightness = MAX_BRIGHTNESS; + + /* set initial brightness */ + ret = arcxcnn_set_brightness(lp, lp->pdata->initial_brightness); + if (ret) + goto probe_err; + + /* set other register values directly */ + ret = i2c_smbus_write_byte_data(lp->client, ARCXCNN_FADECTRL, + lp->pdata->led_config_0); + if (ret) + goto probe_err; + + ret = i2c_smbus_write_byte_data(lp->client, ARCXCNN_ILED_CONFIG, + lp->pdata->led_config_1); + if (ret) + goto probe_err; + + ret = i2c_smbus_write_byte_data(lp->client, ARCXCNN_DIMFREQ, + lp->pdata->dim_freq); + if (ret) + goto probe_err; + + ret = i2c_smbus_write_byte_data(lp->client, ARCXCNN_COMP_CONFIG, + lp->pdata->comp_config); + if (ret) + goto probe_err; + + ret = i2c_smbus_write_byte_data(lp->client, ARCXCNN_FILT_CONFIG, + lp->pdata->filter_config); + if (ret) + goto probe_err; + + ret = i2c_smbus_write_byte_data(lp->client, ARCXCNN_IMAXTUNE, + lp->pdata->trim_config); + if (ret) + goto probe_err; + + /* set initial LED Enables */ + arcxcnn_update_field(lp, ARCXCNN_LEDEN, + ARCXCNN_LEDEN_MASK, lp->pdata->leden); + + ret = arcxcnn_backlight_register(lp); + if (ret) + goto probe_register_err; + + backlight_update_status(lp->bl); + + return 0; + +probe_register_err: + dev_err(lp->dev, + "failed to register backlight.\n"); + +probe_err: + dev_err(lp->dev, + "failure ret: %d\n", ret); + return ret; +} + +static void arcxcnn_remove(struct i2c_client *cl) +{ + struct arcxcnn *lp = i2c_get_clientdata(cl); + + /* disable all strings (ignore errors) */ + i2c_smbus_write_byte_data(lp->client, + ARCXCNN_LEDEN, 0x00); + /* reset the device (ignore errors) */ + i2c_smbus_write_byte_data(lp->client, + ARCXCNN_CMD, ARCXCNN_CMD_RESET); + + lp->bl->props.brightness = 0; + + backlight_update_status(lp->bl); +} + +static const struct of_device_id arcxcnn_dt_ids[] = { + { .compatible = "arc,arc2c0608" }, + { } +}; +MODULE_DEVICE_TABLE(of, arcxcnn_dt_ids); + +static const struct i2c_device_id arcxcnn_ids[] = { + {"arc2c0608", ARC2C0608}, + { } +}; +MODULE_DEVICE_TABLE(i2c, arcxcnn_ids); + +static struct i2c_driver arcxcnn_driver = { + .driver = { + .name = "arcxcnn_bl", + .of_match_table = arcxcnn_dt_ids, + }, + .probe = arcxcnn_probe, + .remove = arcxcnn_remove, + .id_table = arcxcnn_ids, +}; +module_i2c_driver(arcxcnn_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Brian Dodge <bdodge@arcticsand.com>"); +MODULE_DESCRIPTION("ARCXCNN Backlight driver"); diff --git a/drivers/video/backlight/as3711_bl.c b/drivers/video/backlight/as3711_bl.c new file mode 100644 index 0000000000..28437c2da0 --- /dev/null +++ b/drivers/video/backlight/as3711_bl.c @@ -0,0 +1,482 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * AS3711 PMIC backlight driver, using DCDC Step Up Converters + * + * Copyright (C) 2012 Renesas Electronics Corporation + * Author: Guennadi Liakhovetski, <g.liakhovetski@gmx.de> + */ + +#include <linux/backlight.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/fb.h> +#include <linux/kernel.h> +#include <linux/mfd/as3711.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +enum as3711_bl_type { + AS3711_BL_SU1, + AS3711_BL_SU2, +}; + +struct as3711_bl_data { + bool powered; + enum as3711_bl_type type; + int brightness; + struct backlight_device *bl; +}; + +struct as3711_bl_supply { + struct as3711_bl_data su1; + struct as3711_bl_data su2; + const struct as3711_bl_pdata *pdata; + struct as3711 *as3711; +}; + +static struct as3711_bl_supply *to_supply(struct as3711_bl_data *su) +{ + switch (su->type) { + case AS3711_BL_SU1: + return container_of(su, struct as3711_bl_supply, su1); + case AS3711_BL_SU2: + return container_of(su, struct as3711_bl_supply, su2); + } + return NULL; +} + +static int as3711_set_brightness_auto_i(struct as3711_bl_data *data, + unsigned int brightness) +{ + struct as3711_bl_supply *supply = to_supply(data); + struct as3711 *as3711 = supply->as3711; + const struct as3711_bl_pdata *pdata = supply->pdata; + int ret = 0; + + /* Only all equal current values are supported */ + if (pdata->su2_auto_curr1) + ret = regmap_write(as3711->regmap, AS3711_CURR1_VALUE, + brightness); + if (!ret && pdata->su2_auto_curr2) + ret = regmap_write(as3711->regmap, AS3711_CURR2_VALUE, + brightness); + if (!ret && pdata->su2_auto_curr3) + ret = regmap_write(as3711->regmap, AS3711_CURR3_VALUE, + brightness); + + return ret; +} + +static int as3711_set_brightness_v(struct as3711 *as3711, + unsigned int brightness, + unsigned int reg) +{ + if (brightness > 31) + return -EINVAL; + + return regmap_update_bits(as3711->regmap, reg, 0xf0, + brightness << 4); +} + +static int as3711_bl_su2_reset(struct as3711_bl_supply *supply) +{ + struct as3711 *as3711 = supply->as3711; + int ret = regmap_update_bits(as3711->regmap, AS3711_STEPUP_CONTROL_5, + 3, supply->pdata->su2_fbprot); + if (!ret) + ret = regmap_update_bits(as3711->regmap, + AS3711_STEPUP_CONTROL_2, 1, 0); + if (!ret) + ret = regmap_update_bits(as3711->regmap, + AS3711_STEPUP_CONTROL_2, 1, 1); + return ret; +} + +/* + * Someone with less fragile or less expensive hardware could try to simplify + * the brightness adjustment procedure. + */ +static int as3711_bl_update_status(struct backlight_device *bl) +{ + struct as3711_bl_data *data = bl_get_data(bl); + struct as3711_bl_supply *supply = to_supply(data); + struct as3711 *as3711 = supply->as3711; + int brightness; + int ret = 0; + + brightness = backlight_get_brightness(bl); + + if (data->type == AS3711_BL_SU1) { + ret = as3711_set_brightness_v(as3711, brightness, + AS3711_STEPUP_CONTROL_1); + } else { + const struct as3711_bl_pdata *pdata = supply->pdata; + + switch (pdata->su2_feedback) { + case AS3711_SU2_VOLTAGE: + ret = as3711_set_brightness_v(as3711, brightness, + AS3711_STEPUP_CONTROL_2); + break; + case AS3711_SU2_CURR_AUTO: + ret = as3711_set_brightness_auto_i(data, brightness / 4); + if (ret < 0) + return ret; + if (brightness) { + ret = as3711_bl_su2_reset(supply); + if (ret < 0) + return ret; + udelay(500); + ret = as3711_set_brightness_auto_i(data, brightness); + } else { + ret = regmap_update_bits(as3711->regmap, + AS3711_STEPUP_CONTROL_2, 1, 0); + } + break; + /* Manual one current feedback pin below */ + case AS3711_SU2_CURR1: + ret = regmap_write(as3711->regmap, AS3711_CURR1_VALUE, + brightness); + break; + case AS3711_SU2_CURR2: + ret = regmap_write(as3711->regmap, AS3711_CURR2_VALUE, + brightness); + break; + case AS3711_SU2_CURR3: + ret = regmap_write(as3711->regmap, AS3711_CURR3_VALUE, + brightness); + break; + default: + ret = -EINVAL; + } + } + if (!ret) + data->brightness = brightness; + + return ret; +} + +static int as3711_bl_get_brightness(struct backlight_device *bl) +{ + struct as3711_bl_data *data = bl_get_data(bl); + + return data->brightness; +} + +static const struct backlight_ops as3711_bl_ops = { + .update_status = as3711_bl_update_status, + .get_brightness = as3711_bl_get_brightness, +}; + +static int as3711_bl_init_su2(struct as3711_bl_supply *supply) +{ + struct as3711 *as3711 = supply->as3711; + const struct as3711_bl_pdata *pdata = supply->pdata; + u8 ctl = 0; + int ret; + + dev_dbg(as3711->dev, "%s(): use %u\n", __func__, pdata->su2_feedback); + + /* Turn SU2 off */ + ret = regmap_write(as3711->regmap, AS3711_STEPUP_CONTROL_2, 0); + if (ret < 0) + return ret; + + switch (pdata->su2_feedback) { + case AS3711_SU2_VOLTAGE: + ret = regmap_update_bits(as3711->regmap, AS3711_STEPUP_CONTROL_4, 3, 0); + break; + case AS3711_SU2_CURR1: + ctl = 1; + ret = regmap_update_bits(as3711->regmap, AS3711_STEPUP_CONTROL_4, 3, 1); + break; + case AS3711_SU2_CURR2: + ctl = 4; + ret = regmap_update_bits(as3711->regmap, AS3711_STEPUP_CONTROL_4, 3, 2); + break; + case AS3711_SU2_CURR3: + ctl = 0x10; + ret = regmap_update_bits(as3711->regmap, AS3711_STEPUP_CONTROL_4, 3, 3); + break; + case AS3711_SU2_CURR_AUTO: + if (pdata->su2_auto_curr1) + ctl = 2; + if (pdata->su2_auto_curr2) + ctl |= 8; + if (pdata->su2_auto_curr3) + ctl |= 0x20; + ret = 0; + break; + default: + return -EINVAL; + } + + if (!ret) + ret = regmap_write(as3711->regmap, AS3711_CURR_CONTROL, ctl); + + return ret; +} + +static int as3711_bl_register(struct platform_device *pdev, + unsigned int max_brightness, struct as3711_bl_data *su) +{ + struct backlight_properties props = {.type = BACKLIGHT_RAW,}; + struct backlight_device *bl; + + /* max tuning I = 31uA for voltage- and 38250uA for current-feedback */ + props.max_brightness = max_brightness; + + bl = devm_backlight_device_register(&pdev->dev, + su->type == AS3711_BL_SU1 ? + "as3711-su1" : "as3711-su2", + &pdev->dev, su, + &as3711_bl_ops, &props); + if (IS_ERR(bl)) { + dev_err(&pdev->dev, "failed to register backlight\n"); + return PTR_ERR(bl); + } + + bl->props.brightness = props.max_brightness; + + backlight_update_status(bl); + + su->bl = bl; + + return 0; +} + +static int as3711_backlight_parse_dt(struct device *dev) +{ + struct as3711_bl_pdata *pdata = dev_get_platdata(dev); + struct device_node *bl, *fb; + int ret; + + bl = of_get_child_by_name(dev->parent->of_node, "backlight"); + if (!bl) { + dev_dbg(dev, "backlight node not found\n"); + return -ENODEV; + } + + fb = of_parse_phandle(bl, "su1-dev", 0); + if (fb) { + of_node_put(fb); + + pdata->su1_fb = true; + + ret = of_property_read_u32(bl, "su1-max-uA", &pdata->su1_max_uA); + if (pdata->su1_max_uA <= 0) + ret = -EINVAL; + if (ret < 0) + goto err_put_bl; + } + + fb = of_parse_phandle(bl, "su2-dev", 0); + if (fb) { + int count = 0; + + of_node_put(fb); + + pdata->su2_fb = true; + + ret = of_property_read_u32(bl, "su2-max-uA", &pdata->su2_max_uA); + if (pdata->su2_max_uA <= 0) + ret = -EINVAL; + if (ret < 0) + goto err_put_bl; + + if (of_property_read_bool(bl, "su2-feedback-voltage")) { + pdata->su2_feedback = AS3711_SU2_VOLTAGE; + count++; + } + if (of_property_read_bool(bl, "su2-feedback-curr1")) { + pdata->su2_feedback = AS3711_SU2_CURR1; + count++; + } + if (of_property_read_bool(bl, "su2-feedback-curr2")) { + pdata->su2_feedback = AS3711_SU2_CURR2; + count++; + } + if (of_property_read_bool(bl, "su2-feedback-curr3")) { + pdata->su2_feedback = AS3711_SU2_CURR3; + count++; + } + if (of_property_read_bool(bl, "su2-feedback-curr-auto")) { + pdata->su2_feedback = AS3711_SU2_CURR_AUTO; + count++; + } + if (count != 1) { + ret = -EINVAL; + goto err_put_bl; + } + + count = 0; + if (of_property_read_bool(bl, "su2-fbprot-lx-sd4")) { + pdata->su2_fbprot = AS3711_SU2_LX_SD4; + count++; + } + if (of_property_read_bool(bl, "su2-fbprot-gpio2")) { + pdata->su2_fbprot = AS3711_SU2_GPIO2; + count++; + } + if (of_property_read_bool(bl, "su2-fbprot-gpio3")) { + pdata->su2_fbprot = AS3711_SU2_GPIO3; + count++; + } + if (of_property_read_bool(bl, "su2-fbprot-gpio4")) { + pdata->su2_fbprot = AS3711_SU2_GPIO4; + count++; + } + if (count != 1) { + ret = -EINVAL; + goto err_put_bl; + } + + count = 0; + if (of_property_read_bool(bl, "su2-auto-curr1")) { + pdata->su2_auto_curr1 = true; + count++; + } + if (of_property_read_bool(bl, "su2-auto-curr2")) { + pdata->su2_auto_curr2 = true; + count++; + } + if (of_property_read_bool(bl, "su2-auto-curr3")) { + pdata->su2_auto_curr3 = true; + count++; + } + + /* + * At least one su2-auto-curr* must be specified iff + * AS3711_SU2_CURR_AUTO is used + */ + if (!count ^ (pdata->su2_feedback != AS3711_SU2_CURR_AUTO)) { + ret = -EINVAL; + goto err_put_bl; + } + } + + of_node_put(bl); + + return 0; + +err_put_bl: + of_node_put(bl); + + return ret; +} + +static int as3711_backlight_probe(struct platform_device *pdev) +{ + struct as3711_bl_pdata *pdata = dev_get_platdata(&pdev->dev); + struct as3711 *as3711 = dev_get_drvdata(pdev->dev.parent); + struct as3711_bl_supply *supply; + struct as3711_bl_data *su; + unsigned int max_brightness; + int ret; + + if (!pdata) { + dev_err(&pdev->dev, "No platform data, exiting...\n"); + return -ENODEV; + } + + if (pdev->dev.parent->of_node) { + ret = as3711_backlight_parse_dt(&pdev->dev); + if (ret < 0) { + dev_err(&pdev->dev, "DT parsing failed: %d\n", ret); + return ret; + } + } + + if (!pdata->su1_fb && !pdata->su2_fb) { + dev_err(&pdev->dev, "No framebuffer specified\n"); + return -EINVAL; + } + + /* + * Due to possible hardware damage I chose to block all modes, + * unsupported on my hardware. Anyone, wishing to use any of those modes + * will have to first review the code, then activate and test it. + */ + if (pdata->su1_fb || + pdata->su2_fbprot != AS3711_SU2_GPIO4 || + pdata->su2_feedback != AS3711_SU2_CURR_AUTO) { + dev_warn(&pdev->dev, + "Attention! An untested mode has been chosen!\n" + "Please, review the code, enable, test, and report success:-)\n"); + return -EINVAL; + } + + supply = devm_kzalloc(&pdev->dev, sizeof(*supply), GFP_KERNEL); + if (!supply) + return -ENOMEM; + + supply->as3711 = as3711; + supply->pdata = pdata; + + if (pdata->su1_fb) { + su = &supply->su1; + su->type = AS3711_BL_SU1; + + max_brightness = min(pdata->su1_max_uA, 31); + ret = as3711_bl_register(pdev, max_brightness, su); + if (ret < 0) + return ret; + } + + if (pdata->su2_fb) { + su = &supply->su2; + su->type = AS3711_BL_SU2; + + switch (pdata->su2_fbprot) { + case AS3711_SU2_GPIO2: + case AS3711_SU2_GPIO3: + case AS3711_SU2_GPIO4: + case AS3711_SU2_LX_SD4: + break; + default: + return -EINVAL; + } + + switch (pdata->su2_feedback) { + case AS3711_SU2_VOLTAGE: + max_brightness = min(pdata->su2_max_uA, 31); + break; + case AS3711_SU2_CURR1: + case AS3711_SU2_CURR2: + case AS3711_SU2_CURR3: + case AS3711_SU2_CURR_AUTO: + max_brightness = min(pdata->su2_max_uA / 150, 255); + break; + default: + return -EINVAL; + } + + ret = as3711_bl_init_su2(supply); + if (ret < 0) + return ret; + + ret = as3711_bl_register(pdev, max_brightness, su); + if (ret < 0) + return ret; + } + + platform_set_drvdata(pdev, supply); + + return 0; +} + +static struct platform_driver as3711_backlight_driver = { + .driver = { + .name = "as3711-backlight", + }, + .probe = as3711_backlight_probe, +}; + +module_platform_driver(as3711_backlight_driver); + +MODULE_DESCRIPTION("Backlight Driver for AS3711 PMICs"); +MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:as3711-backlight"); diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c new file mode 100644 index 0000000000..86e1cdc8e3 --- /dev/null +++ b/drivers/video/backlight/backlight.c @@ -0,0 +1,779 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Backlight Lowlevel Control Abstraction + * + * Copyright (C) 2003,2004 Hewlett-Packard Company + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/backlight.h> +#include <linux/notifier.h> +#include <linux/ctype.h> +#include <linux/err.h> +#include <linux/fb.h> +#include <linux/slab.h> + +#ifdef CONFIG_PMAC_BACKLIGHT +#include <asm/backlight.h> +#endif + +/** + * DOC: overview + * + * The backlight core supports implementing backlight drivers. + * + * A backlight driver registers a driver using + * devm_backlight_device_register(). The properties of the backlight + * driver such as type and max_brightness must be specified. + * When the core detect changes in for example brightness or power state + * the update_status() operation is called. The backlight driver shall + * implement this operation and use it to adjust backlight. + * + * Several sysfs attributes are provided by the backlight core:: + * + * - brightness R/W, set the requested brightness level + * - actual_brightness RO, the brightness level used by the HW + * - max_brightness RO, the maximum brightness level supported + * + * See Documentation/ABI/stable/sysfs-class-backlight for the full list. + * + * The backlight can be adjusted using the sysfs interface, and + * the backlight driver may also support adjusting backlight using + * a hot-key or some other platform or firmware specific way. + * + * The driver must implement the get_brightness() operation if + * the HW do not support all the levels that can be specified in + * brightness, thus providing user-space access to the actual level + * via the actual_brightness attribute. + * + * When the backlight changes this is reported to user-space using + * an uevent connected to the actual_brightness attribute. + * When brightness is set by platform specific means, for example + * a hot-key to adjust backlight, the driver must notify the backlight + * core that brightness has changed using backlight_force_update(). + * + * The backlight driver core receives notifications from fbdev and + * if the event is FB_EVENT_BLANK and if the value of blank, from the + * FBIOBLANK ioctrl, results in a change in the backlight state the + * update_status() operation is called. + */ + +static struct list_head backlight_dev_list; +static struct mutex backlight_dev_list_mutex; +static struct blocking_notifier_head backlight_notifier; + +static const char *const backlight_types[] = { + [BACKLIGHT_RAW] = "raw", + [BACKLIGHT_PLATFORM] = "platform", + [BACKLIGHT_FIRMWARE] = "firmware", +}; + +static const char *const backlight_scale_types[] = { + [BACKLIGHT_SCALE_UNKNOWN] = "unknown", + [BACKLIGHT_SCALE_LINEAR] = "linear", + [BACKLIGHT_SCALE_NON_LINEAR] = "non-linear", +}; + +#if defined(CONFIG_FB_CORE) || (defined(CONFIG_FB_CORE_MODULE) && \ + defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE)) +/* + * fb_notifier_callback + * + * This callback gets called when something important happens inside a + * framebuffer driver. The backlight core only cares about FB_BLANK_UNBLANK + * which is reported to the driver using backlight_update_status() + * as a state change. + * + * There may be several fbdev's connected to the backlight device, + * in which case they are kept track of. A state change is only reported + * if there is a change in backlight for the specified fbdev. + */ +static int fb_notifier_callback(struct notifier_block *self, + unsigned long event, void *data) +{ + struct backlight_device *bd; + struct fb_event *evdata = data; + int node = evdata->info->node; + int fb_blank = 0; + + /* If we aren't interested in this event, skip it immediately ... */ + if (event != FB_EVENT_BLANK) + return 0; + + bd = container_of(self, struct backlight_device, fb_notif); + mutex_lock(&bd->ops_lock); + + if (!bd->ops) + goto out; + if (bd->ops->check_fb && !bd->ops->check_fb(bd, evdata->info)) + goto out; + + fb_blank = *(int *)evdata->data; + if (fb_blank == FB_BLANK_UNBLANK && !bd->fb_bl_on[node]) { + bd->fb_bl_on[node] = true; + if (!bd->use_count++) { + bd->props.state &= ~BL_CORE_FBBLANK; + bd->props.fb_blank = FB_BLANK_UNBLANK; + backlight_update_status(bd); + } + } else if (fb_blank != FB_BLANK_UNBLANK && bd->fb_bl_on[node]) { + bd->fb_bl_on[node] = false; + if (!(--bd->use_count)) { + bd->props.state |= BL_CORE_FBBLANK; + bd->props.fb_blank = fb_blank; + backlight_update_status(bd); + } + } +out: + mutex_unlock(&bd->ops_lock); + return 0; +} + +static int backlight_register_fb(struct backlight_device *bd) +{ + memset(&bd->fb_notif, 0, sizeof(bd->fb_notif)); + bd->fb_notif.notifier_call = fb_notifier_callback; + + return fb_register_client(&bd->fb_notif); +} + +static void backlight_unregister_fb(struct backlight_device *bd) +{ + fb_unregister_client(&bd->fb_notif); +} +#else +static inline int backlight_register_fb(struct backlight_device *bd) +{ + return 0; +} + +static inline void backlight_unregister_fb(struct backlight_device *bd) +{ +} +#endif /* CONFIG_FB_CORE */ + +static void backlight_generate_event(struct backlight_device *bd, + enum backlight_update_reason reason) +{ + char *envp[2]; + + switch (reason) { + case BACKLIGHT_UPDATE_SYSFS: + envp[0] = "SOURCE=sysfs"; + break; + case BACKLIGHT_UPDATE_HOTKEY: + envp[0] = "SOURCE=hotkey"; + break; + default: + envp[0] = "SOURCE=unknown"; + break; + } + envp[1] = NULL; + kobject_uevent_env(&bd->dev.kobj, KOBJ_CHANGE, envp); + sysfs_notify(&bd->dev.kobj, NULL, "actual_brightness"); +} + +static ssize_t bl_power_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct backlight_device *bd = to_backlight_device(dev); + + return sprintf(buf, "%d\n", bd->props.power); +} + +static ssize_t bl_power_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int rc; + struct backlight_device *bd = to_backlight_device(dev); + unsigned long power, old_power; + + rc = kstrtoul(buf, 0, &power); + if (rc) + return rc; + + rc = -ENXIO; + mutex_lock(&bd->ops_lock); + if (bd->ops) { + pr_debug("set power to %lu\n", power); + if (bd->props.power != power) { + old_power = bd->props.power; + bd->props.power = power; + rc = backlight_update_status(bd); + if (rc) + bd->props.power = old_power; + else + rc = count; + } else { + rc = count; + } + } + mutex_unlock(&bd->ops_lock); + + return rc; +} +static DEVICE_ATTR_RW(bl_power); + +static ssize_t brightness_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct backlight_device *bd = to_backlight_device(dev); + + return sprintf(buf, "%d\n", bd->props.brightness); +} + +int backlight_device_set_brightness(struct backlight_device *bd, + unsigned long brightness) +{ + int rc = -ENXIO; + + mutex_lock(&bd->ops_lock); + if (bd->ops) { + if (brightness > bd->props.max_brightness) + rc = -EINVAL; + else { + pr_debug("set brightness to %lu\n", brightness); + bd->props.brightness = brightness; + rc = backlight_update_status(bd); + } + } + mutex_unlock(&bd->ops_lock); + + backlight_generate_event(bd, BACKLIGHT_UPDATE_SYSFS); + + return rc; +} +EXPORT_SYMBOL(backlight_device_set_brightness); + +static ssize_t brightness_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + int rc; + struct backlight_device *bd = to_backlight_device(dev); + unsigned long brightness; + + rc = kstrtoul(buf, 0, &brightness); + if (rc) + return rc; + + rc = backlight_device_set_brightness(bd, brightness); + + return rc ? rc : count; +} +static DEVICE_ATTR_RW(brightness); + +static ssize_t type_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct backlight_device *bd = to_backlight_device(dev); + + return sprintf(buf, "%s\n", backlight_types[bd->props.type]); +} +static DEVICE_ATTR_RO(type); + +static ssize_t max_brightness_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct backlight_device *bd = to_backlight_device(dev); + + return sprintf(buf, "%d\n", bd->props.max_brightness); +} +static DEVICE_ATTR_RO(max_brightness); + +static ssize_t actual_brightness_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int rc = -ENXIO; + struct backlight_device *bd = to_backlight_device(dev); + + mutex_lock(&bd->ops_lock); + if (bd->ops && bd->ops->get_brightness) { + rc = bd->ops->get_brightness(bd); + if (rc >= 0) + rc = sprintf(buf, "%d\n", rc); + } else { + rc = sprintf(buf, "%d\n", bd->props.brightness); + } + mutex_unlock(&bd->ops_lock); + + return rc; +} +static DEVICE_ATTR_RO(actual_brightness); + +static ssize_t scale_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct backlight_device *bd = to_backlight_device(dev); + + if (WARN_ON(bd->props.scale > BACKLIGHT_SCALE_NON_LINEAR)) + return sprintf(buf, "unknown\n"); + + return sprintf(buf, "%s\n", backlight_scale_types[bd->props.scale]); +} +static DEVICE_ATTR_RO(scale); + +static struct class *backlight_class; + +#ifdef CONFIG_PM_SLEEP +static int backlight_suspend(struct device *dev) +{ + struct backlight_device *bd = to_backlight_device(dev); + + mutex_lock(&bd->ops_lock); + if (bd->ops && bd->ops->options & BL_CORE_SUSPENDRESUME) { + bd->props.state |= BL_CORE_SUSPENDED; + backlight_update_status(bd); + } + mutex_unlock(&bd->ops_lock); + + return 0; +} + +static int backlight_resume(struct device *dev) +{ + struct backlight_device *bd = to_backlight_device(dev); + + mutex_lock(&bd->ops_lock); + if (bd->ops && bd->ops->options & BL_CORE_SUSPENDRESUME) { + bd->props.state &= ~BL_CORE_SUSPENDED; + backlight_update_status(bd); + } + mutex_unlock(&bd->ops_lock); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(backlight_class_dev_pm_ops, backlight_suspend, + backlight_resume); + +static void bl_device_release(struct device *dev) +{ + struct backlight_device *bd = to_backlight_device(dev); + kfree(bd); +} + +static struct attribute *bl_device_attrs[] = { + &dev_attr_bl_power.attr, + &dev_attr_brightness.attr, + &dev_attr_actual_brightness.attr, + &dev_attr_max_brightness.attr, + &dev_attr_scale.attr, + &dev_attr_type.attr, + NULL, +}; +ATTRIBUTE_GROUPS(bl_device); + +/** + * backlight_force_update - tell the backlight subsystem that hardware state + * has changed + * @bd: the backlight device to update + * @reason: reason for update + * + * Updates the internal state of the backlight in response to a hardware event, + * and generates an uevent to notify userspace. A backlight driver shall call + * backlight_force_update() when the backlight is changed using, for example, + * a hot-key. The updated brightness is read using get_brightness() and the + * brightness value is reported using an uevent. + */ +void backlight_force_update(struct backlight_device *bd, + enum backlight_update_reason reason) +{ + int brightness; + + mutex_lock(&bd->ops_lock); + if (bd->ops && bd->ops->get_brightness) { + brightness = bd->ops->get_brightness(bd); + if (brightness >= 0) + bd->props.brightness = brightness; + else + dev_err(&bd->dev, + "Could not update brightness from device: %pe\n", + ERR_PTR(brightness)); + } + mutex_unlock(&bd->ops_lock); + backlight_generate_event(bd, reason); +} +EXPORT_SYMBOL(backlight_force_update); + +/* deprecated - use devm_backlight_device_register() */ +struct backlight_device *backlight_device_register(const char *name, + struct device *parent, void *devdata, const struct backlight_ops *ops, + const struct backlight_properties *props) +{ + struct backlight_device *new_bd; + int rc; + + pr_debug("backlight_device_register: name=%s\n", name); + + new_bd = kzalloc(sizeof(struct backlight_device), GFP_KERNEL); + if (!new_bd) + return ERR_PTR(-ENOMEM); + + mutex_init(&new_bd->update_lock); + mutex_init(&new_bd->ops_lock); + + new_bd->dev.class = backlight_class; + new_bd->dev.parent = parent; + new_bd->dev.release = bl_device_release; + dev_set_name(&new_bd->dev, "%s", name); + dev_set_drvdata(&new_bd->dev, devdata); + + /* Set default properties */ + if (props) { + memcpy(&new_bd->props, props, + sizeof(struct backlight_properties)); + if (props->type <= 0 || props->type >= BACKLIGHT_TYPE_MAX) { + WARN(1, "%s: invalid backlight type", name); + new_bd->props.type = BACKLIGHT_RAW; + } + } else { + new_bd->props.type = BACKLIGHT_RAW; + } + + rc = device_register(&new_bd->dev); + if (rc) { + put_device(&new_bd->dev); + return ERR_PTR(rc); + } + + rc = backlight_register_fb(new_bd); + if (rc) { + device_unregister(&new_bd->dev); + return ERR_PTR(rc); + } + + new_bd->ops = ops; + +#ifdef CONFIG_PMAC_BACKLIGHT + mutex_lock(&pmac_backlight_mutex); + if (!pmac_backlight) + pmac_backlight = new_bd; + mutex_unlock(&pmac_backlight_mutex); +#endif + + mutex_lock(&backlight_dev_list_mutex); + list_add(&new_bd->entry, &backlight_dev_list); + mutex_unlock(&backlight_dev_list_mutex); + + blocking_notifier_call_chain(&backlight_notifier, + BACKLIGHT_REGISTERED, new_bd); + + return new_bd; +} +EXPORT_SYMBOL(backlight_device_register); + +/** backlight_device_get_by_type - find first backlight device of a type + * @type: the type of backlight device + * + * Look up the first backlight device of the specified type + * + * RETURNS: + * + * Pointer to backlight device if any was found. Otherwise NULL. + */ +struct backlight_device *backlight_device_get_by_type(enum backlight_type type) +{ + bool found = false; + struct backlight_device *bd; + + mutex_lock(&backlight_dev_list_mutex); + list_for_each_entry(bd, &backlight_dev_list, entry) { + if (bd->props.type == type) { + found = true; + break; + } + } + mutex_unlock(&backlight_dev_list_mutex); + + return found ? bd : NULL; +} +EXPORT_SYMBOL(backlight_device_get_by_type); + +/** + * backlight_device_get_by_name - Get backlight device by name + * @name: Device name + * + * This function looks up a backlight device by its name. It obtains a reference + * on the backlight device and it is the caller's responsibility to drop the + * reference by calling put_device(). + * + * Returns: + * A pointer to the backlight device if found, otherwise NULL. + */ +struct backlight_device *backlight_device_get_by_name(const char *name) +{ + struct device *dev; + + dev = class_find_device_by_name(backlight_class, name); + + return dev ? to_backlight_device(dev) : NULL; +} +EXPORT_SYMBOL(backlight_device_get_by_name); + +/* deprecated - use devm_backlight_device_unregister() */ +void backlight_device_unregister(struct backlight_device *bd) +{ + if (!bd) + return; + + mutex_lock(&backlight_dev_list_mutex); + list_del(&bd->entry); + mutex_unlock(&backlight_dev_list_mutex); + +#ifdef CONFIG_PMAC_BACKLIGHT + mutex_lock(&pmac_backlight_mutex); + if (pmac_backlight == bd) + pmac_backlight = NULL; + mutex_unlock(&pmac_backlight_mutex); +#endif + + blocking_notifier_call_chain(&backlight_notifier, + BACKLIGHT_UNREGISTERED, bd); + + mutex_lock(&bd->ops_lock); + bd->ops = NULL; + mutex_unlock(&bd->ops_lock); + + backlight_unregister_fb(bd); + device_unregister(&bd->dev); +} +EXPORT_SYMBOL(backlight_device_unregister); + +static void devm_backlight_device_release(struct device *dev, void *res) +{ + struct backlight_device *backlight = *(struct backlight_device **)res; + + backlight_device_unregister(backlight); +} + +static int devm_backlight_device_match(struct device *dev, void *res, + void *data) +{ + struct backlight_device **r = res; + + return *r == data; +} + +/** + * backlight_register_notifier - get notified of backlight (un)registration + * @nb: notifier block with the notifier to call on backlight (un)registration + * + * Register a notifier to get notified when backlight devices get registered + * or unregistered. + * + * RETURNS: + * + * 0 on success, otherwise a negative error code + */ +int backlight_register_notifier(struct notifier_block *nb) +{ + return blocking_notifier_chain_register(&backlight_notifier, nb); +} +EXPORT_SYMBOL(backlight_register_notifier); + +/** + * backlight_unregister_notifier - unregister a backlight notifier + * @nb: notifier block to unregister + * + * Register a notifier to get notified when backlight devices get registered + * or unregistered. + * + * RETURNS: + * + * 0 on success, otherwise a negative error code + */ +int backlight_unregister_notifier(struct notifier_block *nb) +{ + return blocking_notifier_chain_unregister(&backlight_notifier, nb); +} +EXPORT_SYMBOL(backlight_unregister_notifier); + +/** + * devm_backlight_device_register - register a new backlight device + * @dev: the device to register + * @name: the name of the device + * @parent: a pointer to the parent device (often the same as @dev) + * @devdata: an optional pointer to be stored for private driver use + * @ops: the backlight operations structure + * @props: the backlight properties + * + * Creates and registers new backlight device. When a backlight device + * is registered the configuration must be specified in the @props + * parameter. See description of &backlight_properties. + * + * RETURNS: + * + * struct backlight on success, or an ERR_PTR on error + */ +struct backlight_device *devm_backlight_device_register(struct device *dev, + const char *name, struct device *parent, void *devdata, + const struct backlight_ops *ops, + const struct backlight_properties *props) +{ + struct backlight_device **ptr, *backlight; + + ptr = devres_alloc(devm_backlight_device_release, sizeof(*ptr), + GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + backlight = backlight_device_register(name, parent, devdata, ops, + props); + if (!IS_ERR(backlight)) { + *ptr = backlight; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return backlight; +} +EXPORT_SYMBOL(devm_backlight_device_register); + +/** + * devm_backlight_device_unregister - unregister backlight device + * @dev: the device to unregister + * @bd: the backlight device to unregister + * + * Deallocates a backlight allocated with devm_backlight_device_register(). + * Normally this function will not need to be called and the resource management + * code will ensure that the resources are freed. + */ +void devm_backlight_device_unregister(struct device *dev, + struct backlight_device *bd) +{ + int rc; + + rc = devres_release(dev, devm_backlight_device_release, + devm_backlight_device_match, bd); + WARN_ON(rc); +} +EXPORT_SYMBOL(devm_backlight_device_unregister); + +#ifdef CONFIG_OF +static int of_parent_match(struct device *dev, const void *data) +{ + return dev->parent && dev->parent->of_node == data; +} + +/** + * of_find_backlight_by_node() - find backlight device by device-tree node + * @node: device-tree node of the backlight device + * + * Returns a pointer to the backlight device corresponding to the given DT + * node or NULL if no such backlight device exists or if the device hasn't + * been probed yet. + * + * This function obtains a reference on the backlight device and it is the + * caller's responsibility to drop the reference by calling put_device() on + * the backlight device's .dev field. + */ +struct backlight_device *of_find_backlight_by_node(struct device_node *node) +{ + struct device *dev; + + dev = class_find_device(backlight_class, NULL, node, of_parent_match); + + return dev ? to_backlight_device(dev) : NULL; +} +EXPORT_SYMBOL(of_find_backlight_by_node); +#endif + +static struct backlight_device *of_find_backlight(struct device *dev) +{ + struct backlight_device *bd = NULL; + struct device_node *np; + + if (!dev) + return NULL; + + if (IS_ENABLED(CONFIG_OF) && dev->of_node) { + np = of_parse_phandle(dev->of_node, "backlight", 0); + if (np) { + bd = of_find_backlight_by_node(np); + of_node_put(np); + if (!bd) + return ERR_PTR(-EPROBE_DEFER); + } + } + + return bd; +} + +static void devm_backlight_release(void *data) +{ + struct backlight_device *bd = data; + + put_device(&bd->dev); +} + +/** + * devm_of_find_backlight - find backlight for a device + * @dev: the device + * + * This function looks for a property named 'backlight' on the DT node + * connected to @dev and looks up the backlight device. The lookup is + * device managed so the reference to the backlight device is automatically + * dropped on driver detach. + * + * RETURNS: + * + * A pointer to the backlight device if found. + * Error pointer -EPROBE_DEFER if the DT property is set, but no backlight + * device is found. NULL if there's no backlight property. + */ +struct backlight_device *devm_of_find_backlight(struct device *dev) +{ + struct backlight_device *bd; + int ret; + + bd = of_find_backlight(dev); + if (IS_ERR_OR_NULL(bd)) + return bd; + ret = devm_add_action_or_reset(dev, devm_backlight_release, bd); + if (ret) + return ERR_PTR(ret); + + return bd; +} +EXPORT_SYMBOL(devm_of_find_backlight); + +static void __exit backlight_class_exit(void) +{ + class_destroy(backlight_class); +} + +static int __init backlight_class_init(void) +{ + backlight_class = class_create("backlight"); + if (IS_ERR(backlight_class)) { + pr_warn("Unable to create backlight class; errno = %ld\n", + PTR_ERR(backlight_class)); + return PTR_ERR(backlight_class); + } + + backlight_class->dev_groups = bl_device_groups; + backlight_class->pm = &backlight_class_dev_pm_ops; + INIT_LIST_HEAD(&backlight_dev_list); + mutex_init(&backlight_dev_list_mutex); + BLOCKING_INIT_NOTIFIER_HEAD(&backlight_notifier); + + return 0; +} + +/* + * if this is compiled into the kernel, we need to ensure that the + * class is registered before users of the class try to register lcd's + */ +postcore_initcall(backlight_class_init); +module_exit(backlight_class_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jamey Hicks <jamey.hicks@hp.com>, Andrew Zabolotny <zap@homelink.ru>"); +MODULE_DESCRIPTION("Backlight Lowlevel Control Abstraction"); diff --git a/drivers/video/backlight/bd6107.c b/drivers/video/backlight/bd6107.c new file mode 100644 index 0000000000..c95a12bf0c --- /dev/null +++ b/drivers/video/backlight/bd6107.c @@ -0,0 +1,204 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * ROHM Semiconductor BD6107 LED Driver + * + * Copyright (C) 2013 Ideas on board SPRL + * + * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + */ + +#include <linux/backlight.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/fb.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/platform_data/bd6107.h> +#include <linux/slab.h> + +#define BD6107_PSCNT1 0x00 +#define BD6107_PSCNT1_PSCNTREG2 (1 << 2) +#define BD6107_PSCNT1_PSCNTREG1 (1 << 0) +#define BD6107_REGVSET 0x02 +#define BD6107_REGVSET_REG1VSET_2_85V (1 << 2) +#define BD6107_REGVSET_REG1VSET_2_80V (0 << 2) +#define BD6107_LEDCNT1 0x03 +#define BD6107_LEDCNT1_LEDONOFF2 (1 << 1) +#define BD6107_LEDCNT1_LEDONOFF1 (1 << 0) +#define BD6107_PORTSEL 0x04 +#define BD6107_PORTSEL_LEDM(n) (1 << (n)) +#define BD6107_RGB1CNT1 0x05 +#define BD6107_RGB1CNT2 0x06 +#define BD6107_RGB1CNT3 0x07 +#define BD6107_RGB1CNT4 0x08 +#define BD6107_RGB1CNT5 0x09 +#define BD6107_RGB1FLM 0x0a +#define BD6107_RGB2CNT1 0x0b +#define BD6107_RGB2CNT2 0x0c +#define BD6107_RGB2CNT3 0x0d +#define BD6107_RGB2CNT4 0x0e +#define BD6107_RGB2CNT5 0x0f +#define BD6107_RGB2FLM 0x10 +#define BD6107_PSCONT3 0x11 +#define BD6107_SMMONCNT 0x12 +#define BD6107_DCDCCNT 0x13 +#define BD6107_IOSEL 0x14 +#define BD6107_OUT1 0x15 +#define BD6107_OUT2 0x16 +#define BD6107_MASK1 0x17 +#define BD6107_MASK2 0x18 +#define BD6107_FACTOR1 0x19 +#define BD6107_FACTOR2 0x1a +#define BD6107_CLRFACT1 0x1b +#define BD6107_CLRFACT2 0x1c +#define BD6107_STATE1 0x1d +#define BD6107_LSIVER 0x1e +#define BD6107_GRPSEL 0x1f +#define BD6107_LEDCNT2 0x20 +#define BD6107_LEDCNT3 0x21 +#define BD6107_MCURRENT 0x22 +#define BD6107_MAINCNT1 0x23 +#define BD6107_MAINCNT2 0x24 +#define BD6107_SLOPECNT 0x25 +#define BD6107_MSLOPE 0x26 +#define BD6107_RGBSLOPE 0x27 +#define BD6107_TEST 0x29 +#define BD6107_SFTRST 0x2a +#define BD6107_SFTRSTGD 0x2b + +struct bd6107 { + struct i2c_client *client; + struct backlight_device *backlight; + struct bd6107_platform_data *pdata; + struct gpio_desc *reset; +}; + +static int bd6107_write(struct bd6107 *bd, u8 reg, u8 data) +{ + return i2c_smbus_write_byte_data(bd->client, reg, data); +} + +static int bd6107_backlight_update_status(struct backlight_device *backlight) +{ + struct bd6107 *bd = bl_get_data(backlight); + int brightness = backlight_get_brightness(backlight); + + if (brightness) { + bd6107_write(bd, BD6107_PORTSEL, BD6107_PORTSEL_LEDM(2) | + BD6107_PORTSEL_LEDM(1) | BD6107_PORTSEL_LEDM(0)); + bd6107_write(bd, BD6107_MAINCNT1, brightness); + bd6107_write(bd, BD6107_LEDCNT1, BD6107_LEDCNT1_LEDONOFF1); + } else { + /* Assert the reset line (gpiolib will handle active low) */ + gpiod_set_value(bd->reset, 1); + msleep(24); + gpiod_set_value(bd->reset, 0); + } + + return 0; +} + +static int bd6107_backlight_check_fb(struct backlight_device *backlight, + struct fb_info *info) +{ + struct bd6107 *bd = bl_get_data(backlight); + + return !bd->pdata->dev || bd->pdata->dev == info->device; +} + +static const struct backlight_ops bd6107_backlight_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = bd6107_backlight_update_status, + .check_fb = bd6107_backlight_check_fb, +}; + +static int bd6107_probe(struct i2c_client *client) +{ + struct bd6107_platform_data *pdata = dev_get_platdata(&client->dev); + struct backlight_device *backlight; + struct backlight_properties props; + struct bd6107 *bd; + int ret; + + if (pdata == NULL) { + dev_err(&client->dev, "No platform data\n"); + return -EINVAL; + } + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_warn(&client->dev, + "I2C adapter doesn't support I2C_FUNC_SMBUS_BYTE\n"); + return -EIO; + } + + bd = devm_kzalloc(&client->dev, sizeof(*bd), GFP_KERNEL); + if (!bd) + return -ENOMEM; + + bd->client = client; + bd->pdata = pdata; + + /* + * Request the reset GPIO line with GPIOD_OUT_HIGH meaning asserted, + * so in the machine descriptor table (or other hardware description), + * the line should be flagged as active low so this will assert + * the reset. + */ + bd->reset = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(bd->reset)) { + dev_err(&client->dev, "unable to request reset GPIO\n"); + ret = PTR_ERR(bd->reset); + return ret; + } + + memset(&props, 0, sizeof(props)); + props.type = BACKLIGHT_RAW; + props.max_brightness = 128; + props.brightness = clamp_t(unsigned int, pdata->def_value, 0, + props.max_brightness); + + backlight = devm_backlight_device_register(&client->dev, + dev_name(&client->dev), + &bd->client->dev, bd, + &bd6107_backlight_ops, &props); + if (IS_ERR(backlight)) { + dev_err(&client->dev, "failed to register backlight\n"); + return PTR_ERR(backlight); + } + + backlight_update_status(backlight); + i2c_set_clientdata(client, backlight); + + return 0; +} + +static void bd6107_remove(struct i2c_client *client) +{ + struct backlight_device *backlight = i2c_get_clientdata(client); + + backlight->props.brightness = 0; + backlight_update_status(backlight); +} + +static const struct i2c_device_id bd6107_ids[] = { + { "bd6107", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, bd6107_ids); + +static struct i2c_driver bd6107_driver = { + .driver = { + .name = "bd6107", + }, + .probe = bd6107_probe, + .remove = bd6107_remove, + .id_table = bd6107_ids, +}; + +module_i2c_driver(bd6107_driver); + +MODULE_DESCRIPTION("Rohm BD6107 Backlight Driver"); +MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/backlight/corgi_lcd.c b/drivers/video/backlight/corgi_lcd.c new file mode 100644 index 0000000000..0a57033ae3 --- /dev/null +++ b/drivers/video/backlight/corgi_lcd.c @@ -0,0 +1,569 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * LCD/Backlight Driver for Sharp Zaurus Handhelds (various models) + * + * Copyright (c) 2004-2006 Richard Purdie + * + * Based on Sharp's 2.4 Backlight Driver + * + * Copyright (c) 2008 Marvell International Ltd. + * Converted to SPI device based LCD/Backlight device driver + * by Eric Miao <eric.miao@marvell.com> + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/fb.h> +#include <linux/lcd.h> +#include <linux/spi/spi.h> +#include <linux/spi/corgi_lcd.h> +#include <linux/slab.h> +#include <asm/mach/sharpsl_param.h> + +#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL) + +/* Register Addresses */ +#define RESCTL_ADRS 0x00 +#define PHACTRL_ADRS 0x01 +#define DUTYCTRL_ADRS 0x02 +#define POWERREG0_ADRS 0x03 +#define POWERREG1_ADRS 0x04 +#define GPOR3_ADRS 0x05 +#define PICTRL_ADRS 0x06 +#define POLCTRL_ADRS 0x07 + +/* Register Bit Definitions */ +#define RESCTL_QVGA 0x01 +#define RESCTL_VGA 0x00 + +#define POWER1_VW_ON 0x01 /* VW Supply FET ON */ +#define POWER1_GVSS_ON 0x02 /* GVSS(-8V) Power Supply ON */ +#define POWER1_VDD_ON 0x04 /* VDD(8V),SVSS(-4V) Power Supply ON */ + +#define POWER1_VW_OFF 0x00 /* VW Supply FET OFF */ +#define POWER1_GVSS_OFF 0x00 /* GVSS(-8V) Power Supply OFF */ +#define POWER1_VDD_OFF 0x00 /* VDD(8V),SVSS(-4V) Power Supply OFF */ + +#define POWER0_COM_DCLK 0x01 /* COM Voltage DC Bias DAC Serial Data Clock */ +#define POWER0_COM_DOUT 0x02 /* COM Voltage DC Bias DAC Serial Data Out */ +#define POWER0_DAC_ON 0x04 /* DAC Power Supply ON */ +#define POWER0_COM_ON 0x08 /* COM Power Supply ON */ +#define POWER0_VCC5_ON 0x10 /* VCC5 Power Supply ON */ + +#define POWER0_DAC_OFF 0x00 /* DAC Power Supply OFF */ +#define POWER0_COM_OFF 0x00 /* COM Power Supply OFF */ +#define POWER0_VCC5_OFF 0x00 /* VCC5 Power Supply OFF */ + +#define PICTRL_INIT_STATE 0x01 +#define PICTRL_INIOFF 0x02 +#define PICTRL_POWER_DOWN 0x04 +#define PICTRL_COM_SIGNAL_OFF 0x08 +#define PICTRL_DAC_SIGNAL_OFF 0x10 + +#define POLCTRL_SYNC_POL_FALL 0x01 +#define POLCTRL_EN_POL_FALL 0x02 +#define POLCTRL_DATA_POL_FALL 0x04 +#define POLCTRL_SYNC_ACT_H 0x08 +#define POLCTRL_EN_ACT_L 0x10 + +#define POLCTRL_SYNC_POL_RISE 0x00 +#define POLCTRL_EN_POL_RISE 0x00 +#define POLCTRL_DATA_POL_RISE 0x00 +#define POLCTRL_SYNC_ACT_L 0x00 +#define POLCTRL_EN_ACT_H 0x00 + +#define PHACTRL_PHASE_MANUAL 0x01 +#define DEFAULT_PHAD_QVGA (9) +#define DEFAULT_COMADJ (125) + +struct corgi_lcd { + struct spi_device *spi_dev; + struct lcd_device *lcd_dev; + struct backlight_device *bl_dev; + + int limit_mask; + int intensity; + int power; + int mode; + char buf[2]; + + struct gpio_desc *backlight_on; + struct gpio_desc *backlight_cont; + + void (*kick_battery)(void); +}; + +static int corgi_ssp_lcdtg_send(struct corgi_lcd *lcd, int reg, uint8_t val); + +static struct corgi_lcd *the_corgi_lcd; +static unsigned long corgibl_flags; +#define CORGIBL_SUSPENDED 0x01 +#define CORGIBL_BATTLOW 0x02 + +/* + * This is only a pseudo I2C interface. We can't use the standard kernel + * routines as the interface is write only. We just assume the data is acked... + */ +static void lcdtg_ssp_i2c_send(struct corgi_lcd *lcd, uint8_t data) +{ + corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS, data); + udelay(10); +} + +static void lcdtg_i2c_send_bit(struct corgi_lcd *lcd, uint8_t data) +{ + lcdtg_ssp_i2c_send(lcd, data); + lcdtg_ssp_i2c_send(lcd, data | POWER0_COM_DCLK); + lcdtg_ssp_i2c_send(lcd, data); +} + +static void lcdtg_i2c_send_start(struct corgi_lcd *lcd, uint8_t base) +{ + lcdtg_ssp_i2c_send(lcd, base | POWER0_COM_DCLK | POWER0_COM_DOUT); + lcdtg_ssp_i2c_send(lcd, base | POWER0_COM_DCLK); + lcdtg_ssp_i2c_send(lcd, base); +} + +static void lcdtg_i2c_send_stop(struct corgi_lcd *lcd, uint8_t base) +{ + lcdtg_ssp_i2c_send(lcd, base); + lcdtg_ssp_i2c_send(lcd, base | POWER0_COM_DCLK); + lcdtg_ssp_i2c_send(lcd, base | POWER0_COM_DCLK | POWER0_COM_DOUT); +} + +static void lcdtg_i2c_send_byte(struct corgi_lcd *lcd, + uint8_t base, uint8_t data) +{ + int i; + + for (i = 0; i < 8; i++) { + if (data & 0x80) + lcdtg_i2c_send_bit(lcd, base | POWER0_COM_DOUT); + else + lcdtg_i2c_send_bit(lcd, base); + data <<= 1; + } +} + +static void lcdtg_i2c_wait_ack(struct corgi_lcd *lcd, uint8_t base) +{ + lcdtg_i2c_send_bit(lcd, base); +} + +static void lcdtg_set_common_voltage(struct corgi_lcd *lcd, + uint8_t base_data, uint8_t data) +{ + /* Set Common Voltage to M62332FP via I2C */ + lcdtg_i2c_send_start(lcd, base_data); + lcdtg_i2c_send_byte(lcd, base_data, 0x9c); + lcdtg_i2c_wait_ack(lcd, base_data); + lcdtg_i2c_send_byte(lcd, base_data, 0x00); + lcdtg_i2c_wait_ack(lcd, base_data); + lcdtg_i2c_send_byte(lcd, base_data, data); + lcdtg_i2c_wait_ack(lcd, base_data); + lcdtg_i2c_send_stop(lcd, base_data); +} + +static int corgi_ssp_lcdtg_send(struct corgi_lcd *lcd, int adrs, uint8_t data) +{ + struct spi_message msg; + struct spi_transfer xfer = { + .len = 1, + .cs_change = 0, + .tx_buf = lcd->buf, + }; + + lcd->buf[0] = ((adrs & 0x07) << 5) | (data & 0x1f); + spi_message_init(&msg); + spi_message_add_tail(&xfer, &msg); + + return spi_sync(lcd->spi_dev, &msg); +} + +/* Set Phase Adjust */ +static void lcdtg_set_phadadj(struct corgi_lcd *lcd, int mode) +{ + int adj; + + switch (mode) { + case CORGI_LCD_MODE_VGA: + /* Setting for VGA */ + adj = sharpsl_param.phadadj; + adj = (adj < 0) ? PHACTRL_PHASE_MANUAL : + PHACTRL_PHASE_MANUAL | ((adj & 0xf) << 1); + break; + case CORGI_LCD_MODE_QVGA: + default: + /* Setting for QVGA */ + adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL; + break; + } + + corgi_ssp_lcdtg_send(lcd, PHACTRL_ADRS, adj); +} + +static void corgi_lcd_power_on(struct corgi_lcd *lcd) +{ + int comadj; + + /* Initialize Internal Logic & Port */ + corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS, + PICTRL_POWER_DOWN | PICTRL_INIOFF | + PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF | + PICTRL_DAC_SIGNAL_OFF); + + corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS, + POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF | + POWER0_COM_OFF | POWER0_VCC5_OFF); + + corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS, + POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF); + + /* VDD(+8V), SVSS(-4V) ON */ + corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS, + POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON); + mdelay(3); + + /* DAC ON */ + corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS, + POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON | + POWER0_COM_OFF | POWER0_VCC5_OFF); + + /* INIB = H, INI = L */ + /* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */ + corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS, + PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF); + + /* Set Common Voltage */ + comadj = sharpsl_param.comadj; + if (comadj < 0) + comadj = DEFAULT_COMADJ; + + lcdtg_set_common_voltage(lcd, POWER0_DAC_ON | POWER0_COM_OFF | + POWER0_VCC5_OFF, comadj); + + /* VCC5 ON, DAC ON */ + corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS, + POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON | + POWER0_COM_OFF | POWER0_VCC5_ON); + + /* GVSS(-8V) ON, VDD ON */ + corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS, + POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON); + mdelay(2); + + /* COM SIGNAL ON (PICTL[3] = L) */ + corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS, PICTRL_INIT_STATE); + + /* COM ON, DAC ON, VCC5_ON */ + corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS, + POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON | + POWER0_COM_ON | POWER0_VCC5_ON); + + /* VW ON, GVSS ON, VDD ON */ + corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS, + POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON); + + /* Signals output enable */ + corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS, 0); + + /* Set Phase Adjust */ + lcdtg_set_phadadj(lcd, lcd->mode); + + /* Initialize for Input Signals from ATI */ + corgi_ssp_lcdtg_send(lcd, POLCTRL_ADRS, + POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE | + POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L | + POLCTRL_EN_ACT_H); + udelay(1000); + + switch (lcd->mode) { + case CORGI_LCD_MODE_VGA: + corgi_ssp_lcdtg_send(lcd, RESCTL_ADRS, RESCTL_VGA); + break; + case CORGI_LCD_MODE_QVGA: + default: + corgi_ssp_lcdtg_send(lcd, RESCTL_ADRS, RESCTL_QVGA); + break; + } +} + +static void corgi_lcd_power_off(struct corgi_lcd *lcd) +{ + /* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */ + msleep(34); + + /* (1)VW OFF */ + corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS, + POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON); + + /* (2)COM OFF */ + corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF); + corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS, + POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON); + + /* (3)Set Common Voltage Bias 0V */ + lcdtg_set_common_voltage(lcd, POWER0_DAC_ON | POWER0_COM_OFF | + POWER0_VCC5_ON, 0); + + /* (4)GVSS OFF */ + corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS, + POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON); + + /* (5)VCC5 OFF */ + corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS, + POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF); + + /* (6)Set PDWN, INIOFF, DACOFF */ + corgi_ssp_lcdtg_send(lcd, PICTRL_ADRS, + PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF | + PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF); + + /* (7)DAC OFF */ + corgi_ssp_lcdtg_send(lcd, POWERREG0_ADRS, + POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF); + + /* (8)VDD OFF */ + corgi_ssp_lcdtg_send(lcd, POWERREG1_ADRS, + POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF); +} + +static int corgi_lcd_set_mode(struct lcd_device *ld, struct fb_videomode *m) +{ + struct corgi_lcd *lcd = lcd_get_data(ld); + int mode = CORGI_LCD_MODE_QVGA; + + if (m->xres == 640 || m->xres == 480) + mode = CORGI_LCD_MODE_VGA; + + if (lcd->mode == mode) + return 0; + + lcdtg_set_phadadj(lcd, mode); + + switch (mode) { + case CORGI_LCD_MODE_VGA: + corgi_ssp_lcdtg_send(lcd, RESCTL_ADRS, RESCTL_VGA); + break; + case CORGI_LCD_MODE_QVGA: + default: + corgi_ssp_lcdtg_send(lcd, RESCTL_ADRS, RESCTL_QVGA); + break; + } + + lcd->mode = mode; + return 0; +} + +static int corgi_lcd_set_power(struct lcd_device *ld, int power) +{ + struct corgi_lcd *lcd = lcd_get_data(ld); + + if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power)) + corgi_lcd_power_on(lcd); + + if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power)) + corgi_lcd_power_off(lcd); + + lcd->power = power; + return 0; +} + +static int corgi_lcd_get_power(struct lcd_device *ld) +{ + struct corgi_lcd *lcd = lcd_get_data(ld); + + return lcd->power; +} + +static struct lcd_ops corgi_lcd_ops = { + .get_power = corgi_lcd_get_power, + .set_power = corgi_lcd_set_power, + .set_mode = corgi_lcd_set_mode, +}; + +static int corgi_bl_get_intensity(struct backlight_device *bd) +{ + struct corgi_lcd *lcd = bl_get_data(bd); + + return lcd->intensity; +} + +static int corgi_bl_set_intensity(struct corgi_lcd *lcd, int intensity) +{ + int cont; + + if (intensity > 0x10) + intensity += 0x10; + + corgi_ssp_lcdtg_send(lcd, DUTYCTRL_ADRS, intensity); + + /* Bit 5 via GPIO_BACKLIGHT_CONT */ + cont = !!(intensity & 0x20); + + if (lcd->backlight_cont) + gpiod_set_value_cansleep(lcd->backlight_cont, cont); + + if (lcd->backlight_on) + gpiod_set_value_cansleep(lcd->backlight_on, intensity); + + if (lcd->kick_battery) + lcd->kick_battery(); + + lcd->intensity = intensity; + return 0; +} + +static int corgi_bl_update_status(struct backlight_device *bd) +{ + struct corgi_lcd *lcd = bl_get_data(bd); + int intensity = backlight_get_brightness(bd); + + if (corgibl_flags & CORGIBL_SUSPENDED) + intensity = 0; + + if ((corgibl_flags & CORGIBL_BATTLOW) && intensity > lcd->limit_mask) + intensity = lcd->limit_mask; + + return corgi_bl_set_intensity(lcd, intensity); +} + +void corgi_lcd_limit_intensity(int limit) +{ + if (limit) + corgibl_flags |= CORGIBL_BATTLOW; + else + corgibl_flags &= ~CORGIBL_BATTLOW; + + backlight_update_status(the_corgi_lcd->bl_dev); +} +EXPORT_SYMBOL(corgi_lcd_limit_intensity); + +static const struct backlight_ops corgi_bl_ops = { + .get_brightness = corgi_bl_get_intensity, + .update_status = corgi_bl_update_status, +}; + +#ifdef CONFIG_PM_SLEEP +static int corgi_lcd_suspend(struct device *dev) +{ + struct corgi_lcd *lcd = dev_get_drvdata(dev); + + corgibl_flags |= CORGIBL_SUSPENDED; + corgi_bl_set_intensity(lcd, 0); + corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_POWERDOWN); + return 0; +} + +static int corgi_lcd_resume(struct device *dev) +{ + struct corgi_lcd *lcd = dev_get_drvdata(dev); + + corgibl_flags &= ~CORGIBL_SUSPENDED; + corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_UNBLANK); + backlight_update_status(lcd->bl_dev); + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(corgi_lcd_pm_ops, corgi_lcd_suspend, corgi_lcd_resume); + +static int setup_gpio_backlight(struct corgi_lcd *lcd, + struct corgi_lcd_platform_data *pdata) +{ + struct spi_device *spi = lcd->spi_dev; + + lcd->backlight_on = devm_gpiod_get_optional(&spi->dev, + "BL_ON", GPIOD_OUT_LOW); + if (IS_ERR(lcd->backlight_on)) + return PTR_ERR(lcd->backlight_on); + + lcd->backlight_cont = devm_gpiod_get_optional(&spi->dev, "BL_CONT", + GPIOD_OUT_LOW); + if (IS_ERR(lcd->backlight_cont)) + return PTR_ERR(lcd->backlight_cont); + + return 0; +} + +static int corgi_lcd_probe(struct spi_device *spi) +{ + struct backlight_properties props; + struct corgi_lcd_platform_data *pdata = dev_get_platdata(&spi->dev); + struct corgi_lcd *lcd; + int ret = 0; + + if (pdata == NULL) { + dev_err(&spi->dev, "platform data not available\n"); + return -EINVAL; + } + + lcd = devm_kzalloc(&spi->dev, sizeof(struct corgi_lcd), GFP_KERNEL); + if (!lcd) + return -ENOMEM; + + lcd->spi_dev = spi; + + lcd->lcd_dev = devm_lcd_device_register(&spi->dev, "corgi_lcd", + &spi->dev, lcd, &corgi_lcd_ops); + if (IS_ERR(lcd->lcd_dev)) + return PTR_ERR(lcd->lcd_dev); + + lcd->power = FB_BLANK_POWERDOWN; + lcd->mode = (pdata) ? pdata->init_mode : CORGI_LCD_MODE_VGA; + + memset(&props, 0, sizeof(struct backlight_properties)); + props.type = BACKLIGHT_RAW; + props.max_brightness = pdata->max_intensity; + lcd->bl_dev = devm_backlight_device_register(&spi->dev, "corgi_bl", + &spi->dev, lcd, &corgi_bl_ops, + &props); + if (IS_ERR(lcd->bl_dev)) + return PTR_ERR(lcd->bl_dev); + + lcd->bl_dev->props.brightness = pdata->default_intensity; + lcd->bl_dev->props.power = FB_BLANK_UNBLANK; + + ret = setup_gpio_backlight(lcd, pdata); + if (ret) + return ret; + + lcd->kick_battery = pdata->kick_battery; + + spi_set_drvdata(spi, lcd); + corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_UNBLANK); + backlight_update_status(lcd->bl_dev); + + lcd->limit_mask = pdata->limit_mask; + the_corgi_lcd = lcd; + return 0; +} + +static void corgi_lcd_remove(struct spi_device *spi) +{ + struct corgi_lcd *lcd = spi_get_drvdata(spi); + + lcd->bl_dev->props.power = FB_BLANK_UNBLANK; + lcd->bl_dev->props.brightness = 0; + backlight_update_status(lcd->bl_dev); + corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_POWERDOWN); +} + +static struct spi_driver corgi_lcd_driver = { + .driver = { + .name = "corgi-lcd", + .pm = &corgi_lcd_pm_ops, + }, + .probe = corgi_lcd_probe, + .remove = corgi_lcd_remove, +}; + +module_spi_driver(corgi_lcd_driver); + +MODULE_DESCRIPTION("LCD and backlight driver for SHARP C7x0/Cxx00"); +MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("spi:corgi-lcd"); diff --git a/drivers/video/backlight/cr_bllcd.c b/drivers/video/backlight/cr_bllcd.c new file mode 100644 index 0000000000..781aeecc45 --- /dev/null +++ b/drivers/video/backlight/cr_bllcd.c @@ -0,0 +1,264 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) Intel Corp. 2007. + * All Rights Reserved. + * + * Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to + * develop this driver. + * + * This file is part of the Carillo Ranch video subsystem driver. + * + * Authors: + * Thomas Hellstrom <thomas-at-tungstengraphics-dot-com> + * Alan Hourihane <alanh-at-tungstengraphics-dot-com> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mutex.h> +#include <linux/fb.h> +#include <linux/backlight.h> +#include <linux/lcd.h> +#include <linux/pci.h> +#include <linux/slab.h> + +/* The LVDS- and panel power controls sits on the + * GPIO port of the ISA bridge. + */ + +#define CRVML_DEVICE_LPC 0x27B8 +#define CRVML_REG_GPIOBAR 0x48 +#define CRVML_REG_GPIOEN 0x4C +#define CRVML_GPIOEN_BIT (1 << 4) +#define CRVML_PANEL_PORT 0x38 +#define CRVML_LVDS_ON 0x00000001 +#define CRVML_PANEL_ON 0x00000002 +#define CRVML_BACKLIGHT_OFF 0x00000004 + +/* The PLL Clock register sits on Host bridge */ +#define CRVML_DEVICE_MCH 0x5001 +#define CRVML_REG_MCHBAR 0x44 +#define CRVML_REG_MCHEN 0x54 +#define CRVML_MCHEN_BIT (1 << 28) +#define CRVML_MCHMAP_SIZE 4096 +#define CRVML_REG_CLOCK 0xc3c +#define CRVML_CLOCK_SHIFT 8 +#define CRVML_CLOCK_MASK 0x00000f00 + +static struct pci_dev *lpc_dev; +static u32 gpio_bar; + +struct cr_panel { + struct backlight_device *cr_backlight_device; + struct lcd_device *cr_lcd_device; +}; + +static int cr_backlight_set_intensity(struct backlight_device *bd) +{ + u32 addr = gpio_bar + CRVML_PANEL_PORT; + u32 cur = inl(addr); + + if (backlight_get_brightness(bd) == 0) { + /* OFF */ + cur |= CRVML_BACKLIGHT_OFF; + outl(cur, addr); + } else { + /* FULL ON */ + cur &= ~CRVML_BACKLIGHT_OFF; + outl(cur, addr); + } + + return 0; +} + +static int cr_backlight_get_intensity(struct backlight_device *bd) +{ + u32 addr = gpio_bar + CRVML_PANEL_PORT; + u32 cur = inl(addr); + u8 intensity; + + if (cur & CRVML_BACKLIGHT_OFF) + intensity = 0; + else + intensity = 1; + + return intensity; +} + +static const struct backlight_ops cr_backlight_ops = { + .get_brightness = cr_backlight_get_intensity, + .update_status = cr_backlight_set_intensity, +}; + +static void cr_panel_on(void) +{ + u32 addr = gpio_bar + CRVML_PANEL_PORT; + u32 cur = inl(addr); + + if (!(cur & CRVML_PANEL_ON)) { + /* Make sure LVDS controller is down. */ + if (cur & 0x00000001) { + cur &= ~CRVML_LVDS_ON; + outl(cur, addr); + } + /* Power up Panel */ + schedule_timeout(HZ / 10); + cur |= CRVML_PANEL_ON; + outl(cur, addr); + } + + /* Power up LVDS controller */ + + if (!(cur & CRVML_LVDS_ON)) { + schedule_timeout(HZ / 10); + outl(cur | CRVML_LVDS_ON, addr); + } +} + +static void cr_panel_off(void) +{ + u32 addr = gpio_bar + CRVML_PANEL_PORT; + u32 cur = inl(addr); + + /* Power down LVDS controller first to avoid high currents */ + if (cur & CRVML_LVDS_ON) { + cur &= ~CRVML_LVDS_ON; + outl(cur, addr); + } + if (cur & CRVML_PANEL_ON) { + schedule_timeout(HZ / 10); + outl(cur & ~CRVML_PANEL_ON, addr); + } +} + +static int cr_lcd_set_power(struct lcd_device *ld, int power) +{ + if (power == FB_BLANK_UNBLANK) + cr_panel_on(); + if (power == FB_BLANK_POWERDOWN) + cr_panel_off(); + + return 0; +} + +static struct lcd_ops cr_lcd_ops = { + .set_power = cr_lcd_set_power, +}; + +static int cr_backlight_probe(struct platform_device *pdev) +{ + struct backlight_properties props; + struct backlight_device *bdp; + struct lcd_device *ldp; + struct cr_panel *crp; + u8 dev_en; + + lpc_dev = pci_get_device(PCI_VENDOR_ID_INTEL, + CRVML_DEVICE_LPC, NULL); + if (!lpc_dev) { + pr_err("INTEL CARILLO RANCH LPC not found.\n"); + return -ENODEV; + } + + pci_read_config_byte(lpc_dev, CRVML_REG_GPIOEN, &dev_en); + if (!(dev_en & CRVML_GPIOEN_BIT)) { + pr_err("Carillo Ranch GPIO device was not enabled.\n"); + pci_dev_put(lpc_dev); + return -ENODEV; + } + + memset(&props, 0, sizeof(struct backlight_properties)); + props.type = BACKLIGHT_RAW; + bdp = devm_backlight_device_register(&pdev->dev, "cr-backlight", + &pdev->dev, NULL, &cr_backlight_ops, + &props); + if (IS_ERR(bdp)) { + pci_dev_put(lpc_dev); + return PTR_ERR(bdp); + } + + ldp = devm_lcd_device_register(&pdev->dev, "cr-lcd", &pdev->dev, NULL, + &cr_lcd_ops); + if (IS_ERR(ldp)) { + pci_dev_put(lpc_dev); + return PTR_ERR(ldp); + } + + pci_read_config_dword(lpc_dev, CRVML_REG_GPIOBAR, + &gpio_bar); + gpio_bar &= ~0x3F; + + crp = devm_kzalloc(&pdev->dev, sizeof(*crp), GFP_KERNEL); + if (!crp) { + pci_dev_put(lpc_dev); + return -ENOMEM; + } + + crp->cr_backlight_device = bdp; + crp->cr_lcd_device = ldp; + crp->cr_backlight_device->props.power = FB_BLANK_UNBLANK; + crp->cr_backlight_device->props.brightness = 0; + cr_backlight_set_intensity(crp->cr_backlight_device); + cr_lcd_set_power(crp->cr_lcd_device, FB_BLANK_UNBLANK); + + platform_set_drvdata(pdev, crp); + + return 0; +} + +static void cr_backlight_remove(struct platform_device *pdev) +{ + struct cr_panel *crp = platform_get_drvdata(pdev); + + crp->cr_backlight_device->props.power = FB_BLANK_POWERDOWN; + crp->cr_backlight_device->props.brightness = 0; + crp->cr_backlight_device->props.max_brightness = 0; + cr_backlight_set_intensity(crp->cr_backlight_device); + cr_lcd_set_power(crp->cr_lcd_device, FB_BLANK_POWERDOWN); + pci_dev_put(lpc_dev); +} + +static struct platform_driver cr_backlight_driver = { + .probe = cr_backlight_probe, + .remove_new = cr_backlight_remove, + .driver = { + .name = "cr_backlight", + }, +}; + +static struct platform_device *crp; + +static int __init cr_backlight_init(void) +{ + int ret = platform_driver_register(&cr_backlight_driver); + + if (ret) + return ret; + + crp = platform_device_register_simple("cr_backlight", -1, NULL, 0); + if (IS_ERR(crp)) { + platform_driver_unregister(&cr_backlight_driver); + return PTR_ERR(crp); + } + + pr_info("Carillo Ranch Backlight Driver Initialized.\n"); + + return 0; +} + +static void __exit cr_backlight_exit(void) +{ + platform_device_unregister(crp); + platform_driver_unregister(&cr_backlight_driver); +} + +module_init(cr_backlight_init); +module_exit(cr_backlight_exit); + +MODULE_AUTHOR("Tungsten Graphics Inc."); +MODULE_DESCRIPTION("Carillo Ranch Backlight Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/backlight/da903x_bl.c b/drivers/video/backlight/da903x_bl.c new file mode 100644 index 0000000000..71f21bbc7a --- /dev/null +++ b/drivers/video/backlight/da903x_bl.c @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Backlight driver for Dialog Semiconductor DA9030/DA9034 + * + * Copyright (C) 2008 Compulab, Ltd. + * Mike Rapoport <mike@compulab.co.il> + * + * Copyright (C) 2006-2008 Marvell International Ltd. + * Eric Miao <eric.miao@marvell.com> + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/fb.h> +#include <linux/backlight.h> +#include <linux/mfd/da903x.h> +#include <linux/slab.h> +#include <linux/module.h> + +#define DA9030_WLED_CONTROL 0x25 +#define DA9030_WLED_CP_EN (1 << 6) +#define DA9030_WLED_TRIM(x) ((x) & 0x7) + +#define DA9034_WLED_CONTROL1 0x3C +#define DA9034_WLED_CONTROL2 0x3D +#define DA9034_WLED_ISET(x) ((x) & 0x1f) + +#define DA9034_WLED_BOOST_EN (1 << 5) + +#define DA9030_MAX_BRIGHTNESS 7 +#define DA9034_MAX_BRIGHTNESS 0x7f + +struct da903x_backlight_data { + struct device *da903x_dev; + int id; + int current_brightness; +}; + +static int da903x_backlight_set(struct backlight_device *bl, int brightness) +{ + struct da903x_backlight_data *data = bl_get_data(bl); + struct device *dev = data->da903x_dev; + uint8_t val; + int ret = 0; + + switch (data->id) { + case DA9034_ID_WLED: + ret = da903x_update(dev, DA9034_WLED_CONTROL1, + brightness, 0x7f); + if (ret) + return ret; + + if (data->current_brightness && brightness == 0) + ret = da903x_clr_bits(dev, + DA9034_WLED_CONTROL2, + DA9034_WLED_BOOST_EN); + + if (data->current_brightness == 0 && brightness) + ret = da903x_set_bits(dev, + DA9034_WLED_CONTROL2, + DA9034_WLED_BOOST_EN); + break; + case DA9030_ID_WLED: + val = DA9030_WLED_TRIM(brightness); + val |= brightness ? DA9030_WLED_CP_EN : 0; + ret = da903x_write(dev, DA9030_WLED_CONTROL, val); + break; + } + + if (ret) + return ret; + + data->current_brightness = brightness; + return 0; +} + +static int da903x_backlight_update_status(struct backlight_device *bl) +{ + return da903x_backlight_set(bl, backlight_get_brightness(bl)); +} + +static int da903x_backlight_get_brightness(struct backlight_device *bl) +{ + struct da903x_backlight_data *data = bl_get_data(bl); + + return data->current_brightness; +} + +static const struct backlight_ops da903x_backlight_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = da903x_backlight_update_status, + .get_brightness = da903x_backlight_get_brightness, +}; + +static int da903x_backlight_probe(struct platform_device *pdev) +{ + struct da9034_backlight_pdata *pdata = dev_get_platdata(&pdev->dev); + struct da903x_backlight_data *data; + struct backlight_device *bl; + struct backlight_properties props; + int max_brightness; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (data == NULL) + return -ENOMEM; + + switch (pdev->id) { + case DA9030_ID_WLED: + max_brightness = DA9030_MAX_BRIGHTNESS; + break; + case DA9034_ID_WLED: + max_brightness = DA9034_MAX_BRIGHTNESS; + break; + default: + dev_err(&pdev->dev, "invalid backlight device ID(%d)\n", + pdev->id); + return -EINVAL; + } + + data->id = pdev->id; + data->da903x_dev = pdev->dev.parent; + data->current_brightness = 0; + + /* adjust the WLED output current */ + if (pdata) + da903x_write(data->da903x_dev, DA9034_WLED_CONTROL2, + DA9034_WLED_ISET(pdata->output_current)); + + memset(&props, 0, sizeof(props)); + props.type = BACKLIGHT_RAW; + props.max_brightness = max_brightness; + bl = devm_backlight_device_register(&pdev->dev, pdev->name, + data->da903x_dev, data, + &da903x_backlight_ops, &props); + if (IS_ERR(bl)) { + dev_err(&pdev->dev, "failed to register backlight\n"); + return PTR_ERR(bl); + } + + bl->props.brightness = max_brightness; + + platform_set_drvdata(pdev, bl); + backlight_update_status(bl); + return 0; +} + +static struct platform_driver da903x_backlight_driver = { + .driver = { + .name = "da903x-backlight", + }, + .probe = da903x_backlight_probe, +}; + +module_platform_driver(da903x_backlight_driver); + +MODULE_DESCRIPTION("Backlight Driver for Dialog Semiconductor DA9030/DA9034"); +MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>"); +MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:da903x-backlight"); diff --git a/drivers/video/backlight/da9052_bl.c b/drivers/video/backlight/da9052_bl.c new file mode 100644 index 0000000000..1cdc854331 --- /dev/null +++ b/drivers/video/backlight/da9052_bl.c @@ -0,0 +1,178 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Backlight Driver for Dialog DA9052 PMICs + * + * Copyright(c) 2012 Dialog Semiconductor Ltd. + * + * Author: David Dajun Chen <dchen@diasemi.com> + */ + +#include <linux/backlight.h> +#include <linux/delay.h> +#include <linux/fb.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include <linux/mfd/da9052/da9052.h> +#include <linux/mfd/da9052/reg.h> + +#define DA9052_MAX_BRIGHTNESS 0xFF + +enum { + DA9052_WLEDS_OFF, + DA9052_WLEDS_ON, +}; + +enum { + DA9052_TYPE_WLED1, + DA9052_TYPE_WLED2, + DA9052_TYPE_WLED3, +}; + +static const unsigned char wled_bank[] = { + DA9052_LED1_CONF_REG, + DA9052_LED2_CONF_REG, + DA9052_LED3_CONF_REG, +}; + +struct da9052_bl { + struct da9052 *da9052; + uint brightness; + uint state; + uint led_reg; +}; + +static int da9052_adjust_wled_brightness(struct da9052_bl *wleds) +{ + unsigned char boost_en; + unsigned char i_sink; + int ret; + + boost_en = 0x3F; + i_sink = 0xFF; + if (wleds->state == DA9052_WLEDS_OFF) { + boost_en = 0x00; + i_sink = 0x00; + } + + ret = da9052_reg_write(wleds->da9052, DA9052_BOOST_REG, boost_en); + if (ret < 0) + return ret; + + ret = da9052_reg_write(wleds->da9052, DA9052_LED_CONT_REG, i_sink); + if (ret < 0) + return ret; + + ret = da9052_reg_write(wleds->da9052, wled_bank[wleds->led_reg], 0x0); + if (ret < 0) + return ret; + + usleep_range(10000, 11000); + + if (wleds->brightness) { + ret = da9052_reg_write(wleds->da9052, wled_bank[wleds->led_reg], + wleds->brightness); + if (ret < 0) + return ret; + } + + return 0; +} + +static int da9052_backlight_update_status(struct backlight_device *bl) +{ + int brightness = bl->props.brightness; + struct da9052_bl *wleds = bl_get_data(bl); + + wleds->brightness = brightness; + wleds->state = DA9052_WLEDS_ON; + + return da9052_adjust_wled_brightness(wleds); +} + +static int da9052_backlight_get_brightness(struct backlight_device *bl) +{ + struct da9052_bl *wleds = bl_get_data(bl); + + return wleds->brightness; +} + +static const struct backlight_ops da9052_backlight_ops = { + .update_status = da9052_backlight_update_status, + .get_brightness = da9052_backlight_get_brightness, +}; + +static int da9052_backlight_probe(struct platform_device *pdev) +{ + struct backlight_device *bl; + struct backlight_properties props; + struct da9052_bl *wleds; + + wleds = devm_kzalloc(&pdev->dev, sizeof(struct da9052_bl), GFP_KERNEL); + if (!wleds) + return -ENOMEM; + + wleds->da9052 = dev_get_drvdata(pdev->dev.parent); + wleds->brightness = 0; + wleds->led_reg = platform_get_device_id(pdev)->driver_data; + wleds->state = DA9052_WLEDS_OFF; + + props.type = BACKLIGHT_RAW; + props.max_brightness = DA9052_MAX_BRIGHTNESS; + + bl = devm_backlight_device_register(&pdev->dev, pdev->name, + wleds->da9052->dev, wleds, + &da9052_backlight_ops, &props); + if (IS_ERR(bl)) { + dev_err(&pdev->dev, "Failed to register backlight\n"); + return PTR_ERR(bl); + } + + bl->props.max_brightness = DA9052_MAX_BRIGHTNESS; + bl->props.brightness = 0; + platform_set_drvdata(pdev, bl); + + return da9052_adjust_wled_brightness(wleds); +} + +static void da9052_backlight_remove(struct platform_device *pdev) +{ + struct backlight_device *bl = platform_get_drvdata(pdev); + struct da9052_bl *wleds = bl_get_data(bl); + + wleds->brightness = 0; + wleds->state = DA9052_WLEDS_OFF; + da9052_adjust_wled_brightness(wleds); +} + +static const struct platform_device_id da9052_wled_ids[] = { + { + .name = "da9052-wled1", + .driver_data = DA9052_TYPE_WLED1, + }, + { + .name = "da9052-wled2", + .driver_data = DA9052_TYPE_WLED2, + }, + { + .name = "da9052-wled3", + .driver_data = DA9052_TYPE_WLED3, + }, + { }, +}; +MODULE_DEVICE_TABLE(platform, da9052_wled_ids); + +static struct platform_driver da9052_wled_driver = { + .probe = da9052_backlight_probe, + .remove_new = da9052_backlight_remove, + .id_table = da9052_wled_ids, + .driver = { + .name = "da9052-wled", + }, +}; + +module_platform_driver(da9052_wled_driver); + +MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>"); +MODULE_DESCRIPTION("Backlight driver for DA9052 PMIC"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/backlight/ep93xx_bl.c b/drivers/video/backlight/ep93xx_bl.c new file mode 100644 index 0000000000..2387009d45 --- /dev/null +++ b/drivers/video/backlight/ep93xx_bl.c @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Driver for the Cirrus EP93xx lcd backlight + * + * Copyright (c) 2010 H Hartley Sweeten <hsweeten@visionengravers.com> + * + * This driver controls the pulse width modulated brightness control output, + * BRIGHT, on the Cirrus EP9307, EP9312, and EP9315 processors. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/fb.h> +#include <linux/backlight.h> + +#define EP93XX_MAX_COUNT 255 +#define EP93XX_MAX_BRIGHT 255 +#define EP93XX_DEF_BRIGHT 128 + +struct ep93xxbl { + void __iomem *mmio; + int brightness; +}; + +static int ep93xxbl_set(struct backlight_device *bl, int brightness) +{ + struct ep93xxbl *ep93xxbl = bl_get_data(bl); + + writel((brightness << 8) | EP93XX_MAX_COUNT, ep93xxbl->mmio); + + ep93xxbl->brightness = brightness; + + return 0; +} + +static int ep93xxbl_update_status(struct backlight_device *bl) +{ + return ep93xxbl_set(bl, backlight_get_brightness(bl)); +} + +static int ep93xxbl_get_brightness(struct backlight_device *bl) +{ + struct ep93xxbl *ep93xxbl = bl_get_data(bl); + + return ep93xxbl->brightness; +} + +static const struct backlight_ops ep93xxbl_ops = { + .update_status = ep93xxbl_update_status, + .get_brightness = ep93xxbl_get_brightness, +}; + +static int ep93xxbl_probe(struct platform_device *dev) +{ + struct ep93xxbl *ep93xxbl; + struct backlight_device *bl; + struct backlight_properties props; + struct resource *res; + + ep93xxbl = devm_kzalloc(&dev->dev, sizeof(*ep93xxbl), GFP_KERNEL); + if (!ep93xxbl) + return -ENOMEM; + + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!res) + return -ENXIO; + + /* + * FIXME - We don't do a request_mem_region here because we are + * sharing the register space with the framebuffer driver (see + * drivers/video/ep93xx-fb.c) and doing so will cause the second + * loaded driver to return -EBUSY. + * + * NOTE: No locking is required; the framebuffer does not touch + * this register. + */ + ep93xxbl->mmio = devm_ioremap(&dev->dev, res->start, + resource_size(res)); + if (!ep93xxbl->mmio) + return -ENXIO; + + memset(&props, 0, sizeof(struct backlight_properties)); + props.type = BACKLIGHT_RAW; + props.max_brightness = EP93XX_MAX_BRIGHT; + bl = devm_backlight_device_register(&dev->dev, dev->name, &dev->dev, + ep93xxbl, &ep93xxbl_ops, &props); + if (IS_ERR(bl)) + return PTR_ERR(bl); + + bl->props.brightness = EP93XX_DEF_BRIGHT; + + platform_set_drvdata(dev, bl); + + ep93xxbl_update_status(bl); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int ep93xxbl_suspend(struct device *dev) +{ + struct backlight_device *bl = dev_get_drvdata(dev); + + return ep93xxbl_set(bl, 0); +} + +static int ep93xxbl_resume(struct device *dev) +{ + struct backlight_device *bl = dev_get_drvdata(dev); + + backlight_update_status(bl); + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(ep93xxbl_pm_ops, ep93xxbl_suspend, ep93xxbl_resume); + +static struct platform_driver ep93xxbl_driver = { + .driver = { + .name = "ep93xx-bl", + .pm = &ep93xxbl_pm_ops, + }, + .probe = ep93xxbl_probe, +}; + +module_platform_driver(ep93xxbl_driver); + +MODULE_DESCRIPTION("EP93xx Backlight Driver"); +MODULE_AUTHOR("H Hartley Sweeten <hsweeten@visionengravers.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:ep93xx-bl"); diff --git a/drivers/video/backlight/gpio_backlight.c b/drivers/video/backlight/gpio_backlight.c new file mode 100644 index 0000000000..d28c30b2a3 --- /dev/null +++ b/drivers/video/backlight/gpio_backlight.c @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * gpio_backlight.c - Simple GPIO-controlled backlight + */ + +#include <linux/backlight.h> +#include <linux/err.h> +#include <linux/fb.h> +#include <linux/gpio/consumer.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_data/gpio_backlight.h> +#include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/slab.h> + +struct gpio_backlight { + struct device *dev; + struct gpio_desc *gpiod; +}; + +static int gpio_backlight_update_status(struct backlight_device *bl) +{ + struct gpio_backlight *gbl = bl_get_data(bl); + + gpiod_set_value_cansleep(gbl->gpiod, backlight_get_brightness(bl)); + + return 0; +} + +static int gpio_backlight_check_fb(struct backlight_device *bl, + struct fb_info *info) +{ + struct gpio_backlight *gbl = bl_get_data(bl); + + return !gbl->dev || gbl->dev == info->device; +} + +static const struct backlight_ops gpio_backlight_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = gpio_backlight_update_status, + .check_fb = gpio_backlight_check_fb, +}; + +static int gpio_backlight_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct gpio_backlight_platform_data *pdata = dev_get_platdata(dev); + struct device_node *of_node = dev->of_node; + struct backlight_properties props; + struct backlight_device *bl; + struct gpio_backlight *gbl; + int ret, init_brightness, def_value; + + gbl = devm_kzalloc(dev, sizeof(*gbl), GFP_KERNEL); + if (gbl == NULL) + return -ENOMEM; + + if (pdata) + gbl->dev = pdata->dev; + + def_value = device_property_read_bool(dev, "default-on"); + + gbl->gpiod = devm_gpiod_get(dev, NULL, GPIOD_ASIS); + if (IS_ERR(gbl->gpiod)) { + ret = PTR_ERR(gbl->gpiod); + if (ret != -EPROBE_DEFER) + dev_err(dev, + "Error: The gpios parameter is missing or invalid.\n"); + return ret; + } + + memset(&props, 0, sizeof(props)); + props.type = BACKLIGHT_RAW; + props.max_brightness = 1; + bl = devm_backlight_device_register(dev, dev_name(dev), dev, gbl, + &gpio_backlight_ops, &props); + if (IS_ERR(bl)) { + dev_err(dev, "failed to register backlight\n"); + return PTR_ERR(bl); + } + + /* Set the initial power state */ + if (!of_node || !of_node->phandle) + /* Not booted with device tree or no phandle link to the node */ + bl->props.power = def_value ? FB_BLANK_UNBLANK + : FB_BLANK_POWERDOWN; + else if (gpiod_get_value_cansleep(gbl->gpiod) == 0) + bl->props.power = FB_BLANK_POWERDOWN; + else + bl->props.power = FB_BLANK_UNBLANK; + + bl->props.brightness = 1; + + init_brightness = backlight_get_brightness(bl); + ret = gpiod_direction_output(gbl->gpiod, init_brightness); + if (ret) { + dev_err(dev, "failed to set initial brightness\n"); + return ret; + } + + platform_set_drvdata(pdev, bl); + return 0; +} + +static struct of_device_id gpio_backlight_of_match[] = { + { .compatible = "gpio-backlight" }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, gpio_backlight_of_match); + +static struct platform_driver gpio_backlight_driver = { + .driver = { + .name = "gpio-backlight", + .of_match_table = gpio_backlight_of_match, + }, + .probe = gpio_backlight_probe, +}; + +module_platform_driver(gpio_backlight_driver); + +MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); +MODULE_DESCRIPTION("GPIO-based Backlight Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:gpio-backlight"); diff --git a/drivers/video/backlight/hp680_bl.c b/drivers/video/backlight/hp680_bl.c new file mode 100644 index 0000000000..ddb7ab4df7 --- /dev/null +++ b/drivers/video/backlight/hp680_bl.c @@ -0,0 +1,169 @@ +/* + * Backlight Driver for HP Jornada 680 + * + * Copyright (c) 2005 Andriy Skulysh + * + * Based on Sharp's Corgi Backlight Driver + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/fb.h> +#include <linux/backlight.h> + +#include <cpu/dac.h> +#include <mach/hp6xx.h> +#include <asm/hd64461.h> + +#define HP680_MAX_INTENSITY 255 +#define HP680_DEFAULT_INTENSITY 10 + +static int hp680bl_suspended; +static int current_intensity; +static DEFINE_SPINLOCK(bl_lock); + +static void hp680bl_send_intensity(struct backlight_device *bd) +{ + unsigned long flags; + u16 v; + int intensity = backlight_get_brightness(bd); + + if (hp680bl_suspended) + intensity = 0; + + spin_lock_irqsave(&bl_lock, flags); + if (intensity && current_intensity == 0) { + sh_dac_enable(DAC_LCD_BRIGHTNESS); + v = inw(HD64461_GPBDR); + v &= ~HD64461_GPBDR_LCDOFF; + outw(v, HD64461_GPBDR); + sh_dac_output(255-(u8)intensity, DAC_LCD_BRIGHTNESS); + } else if (intensity == 0 && current_intensity != 0) { + sh_dac_output(255-(u8)intensity, DAC_LCD_BRIGHTNESS); + sh_dac_disable(DAC_LCD_BRIGHTNESS); + v = inw(HD64461_GPBDR); + v |= HD64461_GPBDR_LCDOFF; + outw(v, HD64461_GPBDR); + } else if (intensity) { + sh_dac_output(255-(u8)intensity, DAC_LCD_BRIGHTNESS); + } + spin_unlock_irqrestore(&bl_lock, flags); + + current_intensity = intensity; +} + + +#ifdef CONFIG_PM_SLEEP +static int hp680bl_suspend(struct device *dev) +{ + struct backlight_device *bd = dev_get_drvdata(dev); + + hp680bl_suspended = 1; + hp680bl_send_intensity(bd); + return 0; +} + +static int hp680bl_resume(struct device *dev) +{ + struct backlight_device *bd = dev_get_drvdata(dev); + + hp680bl_suspended = 0; + hp680bl_send_intensity(bd); + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(hp680bl_pm_ops, hp680bl_suspend, hp680bl_resume); + +static int hp680bl_set_intensity(struct backlight_device *bd) +{ + hp680bl_send_intensity(bd); + return 0; +} + +static int hp680bl_get_intensity(struct backlight_device *bd) +{ + return current_intensity; +} + +static const struct backlight_ops hp680bl_ops = { + .get_brightness = hp680bl_get_intensity, + .update_status = hp680bl_set_intensity, +}; + +static int hp680bl_probe(struct platform_device *pdev) +{ + struct backlight_properties props; + struct backlight_device *bd; + + memset(&props, 0, sizeof(struct backlight_properties)); + props.type = BACKLIGHT_RAW; + props.max_brightness = HP680_MAX_INTENSITY; + bd = devm_backlight_device_register(&pdev->dev, "hp680-bl", &pdev->dev, + NULL, &hp680bl_ops, &props); + if (IS_ERR(bd)) + return PTR_ERR(bd); + + platform_set_drvdata(pdev, bd); + + bd->props.brightness = HP680_DEFAULT_INTENSITY; + hp680bl_send_intensity(bd); + + return 0; +} + +static void hp680bl_remove(struct platform_device *pdev) +{ + struct backlight_device *bd = platform_get_drvdata(pdev); + + bd->props.brightness = 0; + bd->props.power = 0; + hp680bl_send_intensity(bd); +} + +static struct platform_driver hp680bl_driver = { + .probe = hp680bl_probe, + .remove_new = hp680bl_remove, + .driver = { + .name = "hp680-bl", + .pm = &hp680bl_pm_ops, + }, +}; + +static struct platform_device *hp680bl_device; + +static int __init hp680bl_init(void) +{ + int ret; + + ret = platform_driver_register(&hp680bl_driver); + if (ret) + return ret; + hp680bl_device = platform_device_register_simple("hp680-bl", -1, + NULL, 0); + if (IS_ERR(hp680bl_device)) { + platform_driver_unregister(&hp680bl_driver); + return PTR_ERR(hp680bl_device); + } + return 0; +} + +static void __exit hp680bl_exit(void) +{ + platform_device_unregister(hp680bl_device); + platform_driver_unregister(&hp680bl_driver); +} + +module_init(hp680bl_init); +module_exit(hp680bl_exit); + +MODULE_AUTHOR("Andriy Skulysh <askulysh@gmail.com>"); +MODULE_DESCRIPTION("HP Jornada 680 Backlight Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/backlight/hx8357.c b/drivers/video/backlight/hx8357.c new file mode 100644 index 0000000000..f76d2469d4 --- /dev/null +++ b/drivers/video/backlight/hx8357.c @@ -0,0 +1,681 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Driver for the Himax HX-8357 LCD Controller + * + * Copyright 2012 Free Electrons + */ + +#include <linux/delay.h> +#include <linux/lcd.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> +#include <linux/spi/spi.h> + +#define HX8357_NUM_IM_PINS 3 + +#define HX8357_SWRESET 0x01 +#define HX8357_GET_RED_CHANNEL 0x06 +#define HX8357_GET_GREEN_CHANNEL 0x07 +#define HX8357_GET_BLUE_CHANNEL 0x08 +#define HX8357_GET_POWER_MODE 0x0a +#define HX8357_GET_MADCTL 0x0b +#define HX8357_GET_PIXEL_FORMAT 0x0c +#define HX8357_GET_DISPLAY_MODE 0x0d +#define HX8357_GET_SIGNAL_MODE 0x0e +#define HX8357_GET_DIAGNOSTIC_RESULT 0x0f +#define HX8357_ENTER_SLEEP_MODE 0x10 +#define HX8357_EXIT_SLEEP_MODE 0x11 +#define HX8357_ENTER_PARTIAL_MODE 0x12 +#define HX8357_ENTER_NORMAL_MODE 0x13 +#define HX8357_EXIT_INVERSION_MODE 0x20 +#define HX8357_ENTER_INVERSION_MODE 0x21 +#define HX8357_SET_DISPLAY_OFF 0x28 +#define HX8357_SET_DISPLAY_ON 0x29 +#define HX8357_SET_COLUMN_ADDRESS 0x2a +#define HX8357_SET_PAGE_ADDRESS 0x2b +#define HX8357_WRITE_MEMORY_START 0x2c +#define HX8357_READ_MEMORY_START 0x2e +#define HX8357_SET_PARTIAL_AREA 0x30 +#define HX8357_SET_SCROLL_AREA 0x33 +#define HX8357_SET_TEAR_OFF 0x34 +#define HX8357_SET_TEAR_ON 0x35 +#define HX8357_SET_ADDRESS_MODE 0x36 +#define HX8357_SET_SCROLL_START 0x37 +#define HX8357_EXIT_IDLE_MODE 0x38 +#define HX8357_ENTER_IDLE_MODE 0x39 +#define HX8357_SET_PIXEL_FORMAT 0x3a +#define HX8357_SET_PIXEL_FORMAT_DBI_3BIT (0x1) +#define HX8357_SET_PIXEL_FORMAT_DBI_16BIT (0x5) +#define HX8357_SET_PIXEL_FORMAT_DBI_18BIT (0x6) +#define HX8357_SET_PIXEL_FORMAT_DPI_3BIT (0x1 << 4) +#define HX8357_SET_PIXEL_FORMAT_DPI_16BIT (0x5 << 4) +#define HX8357_SET_PIXEL_FORMAT_DPI_18BIT (0x6 << 4) +#define HX8357_WRITE_MEMORY_CONTINUE 0x3c +#define HX8357_READ_MEMORY_CONTINUE 0x3e +#define HX8357_SET_TEAR_SCAN_LINES 0x44 +#define HX8357_GET_SCAN_LINES 0x45 +#define HX8357_READ_DDB_START 0xa1 +#define HX8357_SET_DISPLAY_MODE 0xb4 +#define HX8357_SET_DISPLAY_MODE_RGB_THROUGH (0x3) +#define HX8357_SET_DISPLAY_MODE_RGB_INTERFACE (1 << 4) +#define HX8357_SET_PANEL_DRIVING 0xc0 +#define HX8357_SET_DISPLAY_FRAME 0xc5 +#define HX8357_SET_RGB 0xc6 +#define HX8357_SET_RGB_ENABLE_HIGH (1 << 1) +#define HX8357_SET_GAMMA 0xc8 +#define HX8357_SET_POWER 0xd0 +#define HX8357_SET_VCOM 0xd1 +#define HX8357_SET_POWER_NORMAL 0xd2 +#define HX8357_SET_PANEL_RELATED 0xe9 + +#define HX8369_SET_DISPLAY_BRIGHTNESS 0x51 +#define HX8369_WRITE_CABC_DISPLAY_VALUE 0x53 +#define HX8369_WRITE_CABC_BRIGHT_CTRL 0x55 +#define HX8369_WRITE_CABC_MIN_BRIGHTNESS 0x5e +#define HX8369_SET_POWER 0xb1 +#define HX8369_SET_DISPLAY_MODE 0xb2 +#define HX8369_SET_DISPLAY_WAVEFORM_CYC 0xb4 +#define HX8369_SET_VCOM 0xb6 +#define HX8369_SET_EXTENSION_COMMAND 0xb9 +#define HX8369_SET_GIP 0xd5 +#define HX8369_SET_GAMMA_CURVE_RELATED 0xe0 + +struct hx8357_data { + unsigned im_pins[HX8357_NUM_IM_PINS]; + unsigned reset; + struct spi_device *spi; + int state; + bool use_im_pins; +}; + +static u8 hx8357_seq_power[] = { + HX8357_SET_POWER, 0x44, 0x41, 0x06, +}; + +static u8 hx8357_seq_vcom[] = { + HX8357_SET_VCOM, 0x40, 0x10, +}; + +static u8 hx8357_seq_power_normal[] = { + HX8357_SET_POWER_NORMAL, 0x05, 0x12, +}; + +static u8 hx8357_seq_panel_driving[] = { + HX8357_SET_PANEL_DRIVING, 0x14, 0x3b, 0x00, 0x02, 0x11, +}; + +static u8 hx8357_seq_display_frame[] = { + HX8357_SET_DISPLAY_FRAME, 0x0c, +}; + +static u8 hx8357_seq_panel_related[] = { + HX8357_SET_PANEL_RELATED, 0x01, +}; + +static u8 hx8357_seq_undefined1[] = { + 0xea, 0x03, 0x00, 0x00, +}; + +static u8 hx8357_seq_undefined2[] = { + 0xeb, 0x40, 0x54, 0x26, 0xdb, +}; + +static u8 hx8357_seq_gamma[] = { + HX8357_SET_GAMMA, 0x00, 0x15, 0x00, 0x22, 0x00, + 0x08, 0x77, 0x26, 0x77, 0x22, 0x04, 0x00, +}; + +static u8 hx8357_seq_address_mode[] = { + HX8357_SET_ADDRESS_MODE, 0xc0, +}; + +static u8 hx8357_seq_pixel_format[] = { + HX8357_SET_PIXEL_FORMAT, + HX8357_SET_PIXEL_FORMAT_DPI_18BIT | + HX8357_SET_PIXEL_FORMAT_DBI_18BIT, +}; + +static u8 hx8357_seq_column_address[] = { + HX8357_SET_COLUMN_ADDRESS, 0x00, 0x00, 0x01, 0x3f, +}; + +static u8 hx8357_seq_page_address[] = { + HX8357_SET_PAGE_ADDRESS, 0x00, 0x00, 0x01, 0xdf, +}; + +static u8 hx8357_seq_rgb[] = { + HX8357_SET_RGB, 0x02, +}; + +static u8 hx8357_seq_display_mode[] = { + HX8357_SET_DISPLAY_MODE, + HX8357_SET_DISPLAY_MODE_RGB_THROUGH | + HX8357_SET_DISPLAY_MODE_RGB_INTERFACE, +}; + +static u8 hx8369_seq_write_CABC_min_brightness[] = { + HX8369_WRITE_CABC_MIN_BRIGHTNESS, 0x00, +}; + +static u8 hx8369_seq_write_CABC_control[] = { + HX8369_WRITE_CABC_DISPLAY_VALUE, 0x24, +}; + +static u8 hx8369_seq_set_display_brightness[] = { + HX8369_SET_DISPLAY_BRIGHTNESS, 0xFF, +}; + +static u8 hx8369_seq_write_CABC_control_setting[] = { + HX8369_WRITE_CABC_BRIGHT_CTRL, 0x02, +}; + +static u8 hx8369_seq_extension_command[] = { + HX8369_SET_EXTENSION_COMMAND, 0xff, 0x83, 0x69, +}; + +static u8 hx8369_seq_display_related[] = { + HX8369_SET_DISPLAY_MODE, 0x00, 0x2b, 0x03, 0x03, 0x70, 0x00, + 0xff, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0x00, 0x01, +}; + +static u8 hx8369_seq_panel_waveform_cycle[] = { + HX8369_SET_DISPLAY_WAVEFORM_CYC, 0x0a, 0x1d, 0x80, 0x06, 0x02, +}; + +static u8 hx8369_seq_set_address_mode[] = { + HX8357_SET_ADDRESS_MODE, 0x00, +}; + +static u8 hx8369_seq_vcom[] = { + HX8369_SET_VCOM, 0x3e, 0x3e, +}; + +static u8 hx8369_seq_gip[] = { + HX8369_SET_GIP, 0x00, 0x01, 0x03, 0x25, 0x01, 0x02, 0x28, 0x70, + 0x11, 0x13, 0x00, 0x00, 0x40, 0x26, 0x51, 0x37, 0x00, 0x00, 0x71, + 0x35, 0x60, 0x24, 0x07, 0x0f, 0x04, 0x04, +}; + +static u8 hx8369_seq_power[] = { + HX8369_SET_POWER, 0x01, 0x00, 0x34, 0x03, 0x00, 0x11, 0x11, 0x32, + 0x2f, 0x3f, 0x3f, 0x01, 0x3a, 0x01, 0xe6, 0xe6, 0xe6, 0xe6, 0xe6, +}; + +static u8 hx8369_seq_gamma_curve_related[] = { + HX8369_SET_GAMMA_CURVE_RELATED, 0x00, 0x0d, 0x19, 0x2f, 0x3b, 0x3d, + 0x2e, 0x4a, 0x08, 0x0e, 0x0f, 0x14, 0x16, 0x14, 0x14, 0x14, 0x1e, + 0x00, 0x0d, 0x19, 0x2f, 0x3b, 0x3d, 0x2e, 0x4a, 0x08, 0x0e, 0x0f, + 0x14, 0x16, 0x14, 0x14, 0x14, 0x1e, +}; + +static int hx8357_spi_write_then_read(struct lcd_device *lcdev, + u8 *txbuf, u16 txlen, + u8 *rxbuf, u16 rxlen) +{ + struct hx8357_data *lcd = lcd_get_data(lcdev); + struct spi_message msg; + struct spi_transfer xfer[2]; + u16 *local_txbuf = NULL; + int ret = 0; + + memset(xfer, 0, sizeof(xfer)); + spi_message_init(&msg); + + if (txlen) { + int i; + + local_txbuf = kcalloc(txlen, sizeof(*local_txbuf), GFP_KERNEL); + + if (!local_txbuf) + return -ENOMEM; + + for (i = 0; i < txlen; i++) { + local_txbuf[i] = txbuf[i]; + if (i > 0) + local_txbuf[i] |= 1 << 8; + } + + xfer[0].len = 2 * txlen; + xfer[0].bits_per_word = 9; + xfer[0].tx_buf = local_txbuf; + spi_message_add_tail(&xfer[0], &msg); + } + + if (rxlen) { + xfer[1].len = rxlen; + xfer[1].bits_per_word = 8; + xfer[1].rx_buf = rxbuf; + spi_message_add_tail(&xfer[1], &msg); + } + + ret = spi_sync(lcd->spi, &msg); + if (ret < 0) + dev_err(&lcdev->dev, "Couldn't send SPI data\n"); + + if (txlen) + kfree(local_txbuf); + + return ret; +} + +static inline int hx8357_spi_write_array(struct lcd_device *lcdev, + u8 *value, u8 len) +{ + return hx8357_spi_write_then_read(lcdev, value, len, NULL, 0); +} + +static inline int hx8357_spi_write_byte(struct lcd_device *lcdev, + u8 value) +{ + return hx8357_spi_write_then_read(lcdev, &value, 1, NULL, 0); +} + +static int hx8357_enter_standby(struct lcd_device *lcdev) +{ + int ret; + + ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_OFF); + if (ret < 0) + return ret; + + usleep_range(10000, 12000); + + ret = hx8357_spi_write_byte(lcdev, HX8357_ENTER_SLEEP_MODE); + if (ret < 0) + return ret; + + /* + * The controller needs 120ms when entering in sleep mode before we can + * send the command to go off sleep mode + */ + msleep(120); + + return 0; +} + +static int hx8357_exit_standby(struct lcd_device *lcdev) +{ + int ret; + + ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE); + if (ret < 0) + return ret; + + /* + * The controller needs 120ms when exiting from sleep mode before we + * can send the command to enter in sleep mode + */ + msleep(120); + + ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON); + if (ret < 0) + return ret; + + return 0; +} + +static void hx8357_lcd_reset(struct lcd_device *lcdev) +{ + struct hx8357_data *lcd = lcd_get_data(lcdev); + + /* Reset the screen */ + gpio_set_value(lcd->reset, 1); + usleep_range(10000, 12000); + gpio_set_value(lcd->reset, 0); + usleep_range(10000, 12000); + gpio_set_value(lcd->reset, 1); + + /* The controller needs 120ms to recover from reset */ + msleep(120); +} + +static int hx8357_lcd_init(struct lcd_device *lcdev) +{ + struct hx8357_data *lcd = lcd_get_data(lcdev); + int ret; + + /* + * Set the interface selection pins to SPI mode, with three + * wires + */ + if (lcd->use_im_pins) { + gpio_set_value_cansleep(lcd->im_pins[0], 1); + gpio_set_value_cansleep(lcd->im_pins[1], 0); + gpio_set_value_cansleep(lcd->im_pins[2], 1); + } + + ret = hx8357_spi_write_array(lcdev, hx8357_seq_power, + ARRAY_SIZE(hx8357_seq_power)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_array(lcdev, hx8357_seq_vcom, + ARRAY_SIZE(hx8357_seq_vcom)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_array(lcdev, hx8357_seq_power_normal, + ARRAY_SIZE(hx8357_seq_power_normal)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_array(lcdev, hx8357_seq_panel_driving, + ARRAY_SIZE(hx8357_seq_panel_driving)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_array(lcdev, hx8357_seq_display_frame, + ARRAY_SIZE(hx8357_seq_display_frame)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_array(lcdev, hx8357_seq_panel_related, + ARRAY_SIZE(hx8357_seq_panel_related)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_array(lcdev, hx8357_seq_undefined1, + ARRAY_SIZE(hx8357_seq_undefined1)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_array(lcdev, hx8357_seq_undefined2, + ARRAY_SIZE(hx8357_seq_undefined2)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_array(lcdev, hx8357_seq_gamma, + ARRAY_SIZE(hx8357_seq_gamma)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_array(lcdev, hx8357_seq_address_mode, + ARRAY_SIZE(hx8357_seq_address_mode)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_array(lcdev, hx8357_seq_pixel_format, + ARRAY_SIZE(hx8357_seq_pixel_format)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_array(lcdev, hx8357_seq_column_address, + ARRAY_SIZE(hx8357_seq_column_address)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_array(lcdev, hx8357_seq_page_address, + ARRAY_SIZE(hx8357_seq_page_address)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_array(lcdev, hx8357_seq_rgb, + ARRAY_SIZE(hx8357_seq_rgb)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_array(lcdev, hx8357_seq_display_mode, + ARRAY_SIZE(hx8357_seq_display_mode)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE); + if (ret < 0) + return ret; + + /* + * The controller needs 120ms to fully recover from exiting sleep mode + */ + msleep(120); + + ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON); + if (ret < 0) + return ret; + + usleep_range(5000, 7000); + + ret = hx8357_spi_write_byte(lcdev, HX8357_WRITE_MEMORY_START); + if (ret < 0) + return ret; + + return 0; +} + +static int hx8369_lcd_init(struct lcd_device *lcdev) +{ + int ret; + + ret = hx8357_spi_write_array(lcdev, hx8369_seq_extension_command, + ARRAY_SIZE(hx8369_seq_extension_command)); + if (ret < 0) + return ret; + usleep_range(10000, 12000); + + ret = hx8357_spi_write_array(lcdev, hx8369_seq_display_related, + ARRAY_SIZE(hx8369_seq_display_related)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_array(lcdev, hx8369_seq_panel_waveform_cycle, + ARRAY_SIZE(hx8369_seq_panel_waveform_cycle)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_array(lcdev, hx8369_seq_set_address_mode, + ARRAY_SIZE(hx8369_seq_set_address_mode)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_array(lcdev, hx8369_seq_vcom, + ARRAY_SIZE(hx8369_seq_vcom)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_array(lcdev, hx8369_seq_gip, + ARRAY_SIZE(hx8369_seq_gip)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_array(lcdev, hx8369_seq_power, + ARRAY_SIZE(hx8369_seq_power)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE); + if (ret < 0) + return ret; + + /* + * The controller needs 120ms to fully recover from exiting sleep mode + */ + msleep(120); + + ret = hx8357_spi_write_array(lcdev, hx8369_seq_gamma_curve_related, + ARRAY_SIZE(hx8369_seq_gamma_curve_related)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE); + if (ret < 0) + return ret; + usleep_range(1000, 1200); + + ret = hx8357_spi_write_array(lcdev, hx8369_seq_write_CABC_control, + ARRAY_SIZE(hx8369_seq_write_CABC_control)); + if (ret < 0) + return ret; + usleep_range(10000, 12000); + + ret = hx8357_spi_write_array(lcdev, + hx8369_seq_write_CABC_control_setting, + ARRAY_SIZE(hx8369_seq_write_CABC_control_setting)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_array(lcdev, + hx8369_seq_write_CABC_min_brightness, + ARRAY_SIZE(hx8369_seq_write_CABC_min_brightness)); + if (ret < 0) + return ret; + usleep_range(10000, 12000); + + ret = hx8357_spi_write_array(lcdev, hx8369_seq_set_display_brightness, + ARRAY_SIZE(hx8369_seq_set_display_brightness)); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON); + if (ret < 0) + return ret; + + return 0; +} + +#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL) + +static int hx8357_set_power(struct lcd_device *lcdev, int power) +{ + struct hx8357_data *lcd = lcd_get_data(lcdev); + int ret = 0; + + if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->state)) + ret = hx8357_exit_standby(lcdev); + else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->state)) + ret = hx8357_enter_standby(lcdev); + + if (ret == 0) + lcd->state = power; + else + dev_warn(&lcdev->dev, "failed to set power mode %d\n", power); + + return ret; +} + +static int hx8357_get_power(struct lcd_device *lcdev) +{ + struct hx8357_data *lcd = lcd_get_data(lcdev); + + return lcd->state; +} + +static struct lcd_ops hx8357_ops = { + .set_power = hx8357_set_power, + .get_power = hx8357_get_power, +}; + +static const struct of_device_id hx8357_dt_ids[] = { + { + .compatible = "himax,hx8357", + .data = hx8357_lcd_init, + }, + { + .compatible = "himax,hx8369", + .data = hx8369_lcd_init, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, hx8357_dt_ids); + +static int hx8357_probe(struct spi_device *spi) +{ + struct lcd_device *lcdev; + struct hx8357_data *lcd; + const struct of_device_id *match; + int i, ret; + + lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL); + if (!lcd) + return -ENOMEM; + + ret = spi_setup(spi); + if (ret < 0) { + dev_err(&spi->dev, "SPI setup failed.\n"); + return ret; + } + + lcd->spi = spi; + + match = of_match_device(hx8357_dt_ids, &spi->dev); + if (!match || !match->data) + return -EINVAL; + + lcd->reset = of_get_named_gpio(spi->dev.of_node, "gpios-reset", 0); + if (!gpio_is_valid(lcd->reset)) { + dev_err(&spi->dev, "Missing dt property: gpios-reset\n"); + return -EINVAL; + } + + ret = devm_gpio_request_one(&spi->dev, lcd->reset, + GPIOF_OUT_INIT_HIGH, + "hx8357-reset"); + if (ret) { + dev_err(&spi->dev, + "failed to request gpio %d: %d\n", + lcd->reset, ret); + return -EINVAL; + } + + if (of_property_present(spi->dev.of_node, "im-gpios")) { + lcd->use_im_pins = 1; + + for (i = 0; i < HX8357_NUM_IM_PINS; i++) { + lcd->im_pins[i] = of_get_named_gpio(spi->dev.of_node, + "im-gpios", i); + if (lcd->im_pins[i] == -EPROBE_DEFER) { + dev_info(&spi->dev, "GPIO requested is not here yet, deferring the probe\n"); + return -EPROBE_DEFER; + } + if (!gpio_is_valid(lcd->im_pins[i])) { + dev_err(&spi->dev, "Missing dt property: im-gpios\n"); + return -EINVAL; + } + + ret = devm_gpio_request_one(&spi->dev, lcd->im_pins[i], + GPIOF_OUT_INIT_LOW, + "im_pins"); + if (ret) { + dev_err(&spi->dev, "failed to request gpio %d: %d\n", + lcd->im_pins[i], ret); + return -EINVAL; + } + } + } else { + lcd->use_im_pins = 0; + } + + lcdev = devm_lcd_device_register(&spi->dev, "mxsfb", &spi->dev, lcd, + &hx8357_ops); + if (IS_ERR(lcdev)) { + ret = PTR_ERR(lcdev); + return ret; + } + spi_set_drvdata(spi, lcdev); + + hx8357_lcd_reset(lcdev); + + ret = ((int (*)(struct lcd_device *))match->data)(lcdev); + if (ret) { + dev_err(&spi->dev, "Couldn't initialize panel\n"); + return ret; + } + + dev_info(&spi->dev, "Panel probed\n"); + + return 0; +} + +static struct spi_driver hx8357_driver = { + .probe = hx8357_probe, + .driver = { + .name = "hx8357", + .of_match_table = hx8357_dt_ids, + }, +}; + +module_spi_driver(hx8357_driver); + +MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>"); +MODULE_DESCRIPTION("Himax HX-8357 LCD Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/backlight/ili922x.c b/drivers/video/backlight/ili922x.c new file mode 100644 index 0000000000..e7b6bd8279 --- /dev/null +++ b/drivers/video/backlight/ili922x.c @@ -0,0 +1,548 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * (C) Copyright 2008 + * Stefano Babic, DENX Software Engineering, sbabic@denx.de. + * + * This driver implements a lcd device for the ILITEK 922x display + * controller. The interface to the display is SPI and the display's + * memory is cyclically updated over the RGB interface. + */ + +#include <linux/fb.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/lcd.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/slab.h> +#include <linux/spi/spi.h> +#include <linux/string.h> + +/* Register offset, see manual section 8.2 */ +#define REG_START_OSCILLATION 0x00 +#define REG_DRIVER_CODE_READ 0x00 +#define REG_DRIVER_OUTPUT_CONTROL 0x01 +#define REG_LCD_AC_DRIVEING_CONTROL 0x02 +#define REG_ENTRY_MODE 0x03 +#define REG_COMPARE_1 0x04 +#define REG_COMPARE_2 0x05 +#define REG_DISPLAY_CONTROL_1 0x07 +#define REG_DISPLAY_CONTROL_2 0x08 +#define REG_DISPLAY_CONTROL_3 0x09 +#define REG_FRAME_CYCLE_CONTROL 0x0B +#define REG_EXT_INTF_CONTROL 0x0C +#define REG_POWER_CONTROL_1 0x10 +#define REG_POWER_CONTROL_2 0x11 +#define REG_POWER_CONTROL_3 0x12 +#define REG_POWER_CONTROL_4 0x13 +#define REG_RAM_ADDRESS_SET 0x21 +#define REG_WRITE_DATA_TO_GRAM 0x22 +#define REG_RAM_WRITE_MASK1 0x23 +#define REG_RAM_WRITE_MASK2 0x24 +#define REG_GAMMA_CONTROL_1 0x30 +#define REG_GAMMA_CONTROL_2 0x31 +#define REG_GAMMA_CONTROL_3 0x32 +#define REG_GAMMA_CONTROL_4 0x33 +#define REG_GAMMA_CONTROL_5 0x34 +#define REG_GAMMA_CONTROL_6 0x35 +#define REG_GAMMA_CONTROL_7 0x36 +#define REG_GAMMA_CONTROL_8 0x37 +#define REG_GAMMA_CONTROL_9 0x38 +#define REG_GAMMA_CONTROL_10 0x39 +#define REG_GATE_SCAN_CONTROL 0x40 +#define REG_VERT_SCROLL_CONTROL 0x41 +#define REG_FIRST_SCREEN_DRIVE_POS 0x42 +#define REG_SECOND_SCREEN_DRIVE_POS 0x43 +#define REG_RAM_ADDR_POS_H 0x44 +#define REG_RAM_ADDR_POS_V 0x45 +#define REG_OSCILLATOR_CONTROL 0x4F +#define REG_GPIO 0x60 +#define REG_OTP_VCM_PROGRAMMING 0x61 +#define REG_OTP_VCM_STATUS_ENABLE 0x62 +#define REG_OTP_PROGRAMMING_ID_KEY 0x65 + +/* + * maximum frequency for register access + * (not for the GRAM access) + */ +#define ILITEK_MAX_FREQ_REG 4000000 + +/* + * Device ID as found in the datasheet (supports 9221 and 9222) + */ +#define ILITEK_DEVICE_ID 0x9220 +#define ILITEK_DEVICE_ID_MASK 0xFFF0 + +/* Last two bits in the START BYTE */ +#define START_RS_INDEX 0 +#define START_RS_REG 1 +#define START_RW_WRITE 0 +#define START_RW_READ 1 + +/** + * START_BYTE(id, rs, rw) + * + * Set the start byte according to the required operation. + * The start byte is defined as: + * ---------------------------------- + * | 0 | 1 | 1 | 1 | 0 | ID | RS | RW | + * ---------------------------------- + * @id: display's id as set by the manufacturer + * @rs: operation type bit, one of: + * - START_RS_INDEX set the index register + * - START_RS_REG write/read registers/GRAM + * @rw: read/write operation + * - START_RW_WRITE write + * - START_RW_READ read + */ +#define START_BYTE(id, rs, rw) \ + (0x70 | (((id) & 0x01) << 2) | (((rs) & 0x01) << 1) | ((rw) & 0x01)) + +/** + * CHECK_FREQ_REG(spi_device s, spi_transfer x) - Check the frequency + * for the SPI transfer. According to the datasheet, the controller + * accept higher frequency for the GRAM transfer, but it requires + * lower frequency when the registers are read/written. + * The macro sets the frequency in the spi_transfer structure if + * the frequency exceeds the maximum value. + * @s: pointer to an SPI device + * @x: pointer to the read/write buffer pair + */ +#define CHECK_FREQ_REG(s, x) \ + do { \ + if (s->max_speed_hz > ILITEK_MAX_FREQ_REG) \ + ((struct spi_transfer *)x)->speed_hz = \ + ILITEK_MAX_FREQ_REG; \ + } while (0) + +#define CMD_BUFSIZE 16 + +#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL) + +#define set_tx_byte(b) (tx_invert ? ~(b) : b) + +/* + * ili922x_id - id as set by manufacturer + */ +static int ili922x_id = 1; +module_param(ili922x_id, int, 0); + +static int tx_invert; +module_param(tx_invert, int, 0); + +/* + * driver's private structure + */ +struct ili922x { + struct spi_device *spi; + struct lcd_device *ld; + int power; +}; + +/** + * ili922x_read_status - read status register from display + * @spi: spi device + * @rs: output value + */ +static int ili922x_read_status(struct spi_device *spi, u16 *rs) +{ + struct spi_message msg; + struct spi_transfer xfer; + unsigned char tbuf[CMD_BUFSIZE]; + unsigned char rbuf[CMD_BUFSIZE]; + int ret, i; + + memset(&xfer, 0, sizeof(struct spi_transfer)); + spi_message_init(&msg); + xfer.tx_buf = tbuf; + xfer.rx_buf = rbuf; + xfer.cs_change = 1; + CHECK_FREQ_REG(spi, &xfer); + + tbuf[0] = set_tx_byte(START_BYTE(ili922x_id, START_RS_INDEX, + START_RW_READ)); + /* + * we need 4-byte xfer here due to invalid dummy byte + * received after start byte + */ + for (i = 1; i < 4; i++) + tbuf[i] = set_tx_byte(0); /* dummy */ + + xfer.bits_per_word = 8; + xfer.len = 4; + spi_message_add_tail(&xfer, &msg); + ret = spi_sync(spi, &msg); + if (ret < 0) { + dev_dbg(&spi->dev, "Error sending SPI message 0x%x", ret); + return ret; + } + + *rs = (rbuf[2] << 8) + rbuf[3]; + return 0; +} + +/** + * ili922x_read - read register from display + * @spi: spi device + * @reg: offset of the register to be read + * @rx: output value + */ +static int ili922x_read(struct spi_device *spi, u8 reg, u16 *rx) +{ + struct spi_message msg; + struct spi_transfer xfer_regindex, xfer_regvalue; + unsigned char tbuf[CMD_BUFSIZE]; + unsigned char rbuf[CMD_BUFSIZE]; + int ret, len = 0, send_bytes; + + memset(&xfer_regindex, 0, sizeof(struct spi_transfer)); + memset(&xfer_regvalue, 0, sizeof(struct spi_transfer)); + spi_message_init(&msg); + xfer_regindex.tx_buf = tbuf; + xfer_regindex.rx_buf = rbuf; + xfer_regindex.cs_change = 1; + CHECK_FREQ_REG(spi, &xfer_regindex); + + tbuf[0] = set_tx_byte(START_BYTE(ili922x_id, START_RS_INDEX, + START_RW_WRITE)); + tbuf[1] = set_tx_byte(0); + tbuf[2] = set_tx_byte(reg); + xfer_regindex.bits_per_word = 8; + len = xfer_regindex.len = 3; + spi_message_add_tail(&xfer_regindex, &msg); + + send_bytes = len; + + tbuf[len++] = set_tx_byte(START_BYTE(ili922x_id, START_RS_REG, + START_RW_READ)); + tbuf[len++] = set_tx_byte(0); + tbuf[len] = set_tx_byte(0); + + xfer_regvalue.cs_change = 1; + xfer_regvalue.len = 3; + xfer_regvalue.tx_buf = &tbuf[send_bytes]; + xfer_regvalue.rx_buf = &rbuf[send_bytes]; + CHECK_FREQ_REG(spi, &xfer_regvalue); + + spi_message_add_tail(&xfer_regvalue, &msg); + ret = spi_sync(spi, &msg); + if (ret < 0) { + dev_dbg(&spi->dev, "Error sending SPI message 0x%x", ret); + return ret; + } + + *rx = (rbuf[1 + send_bytes] << 8) + rbuf[2 + send_bytes]; + return 0; +} + +/** + * ili922x_write - write a controller register + * @spi: struct spi_device * + * @reg: offset of the register to be written + * @value: value to be written + */ +static int ili922x_write(struct spi_device *spi, u8 reg, u16 value) +{ + struct spi_message msg; + struct spi_transfer xfer_regindex, xfer_regvalue; + unsigned char tbuf[CMD_BUFSIZE]; + unsigned char rbuf[CMD_BUFSIZE]; + int ret; + + memset(&xfer_regindex, 0, sizeof(struct spi_transfer)); + memset(&xfer_regvalue, 0, sizeof(struct spi_transfer)); + + spi_message_init(&msg); + xfer_regindex.tx_buf = tbuf; + xfer_regindex.rx_buf = rbuf; + xfer_regindex.cs_change = 1; + CHECK_FREQ_REG(spi, &xfer_regindex); + + tbuf[0] = set_tx_byte(START_BYTE(ili922x_id, START_RS_INDEX, + START_RW_WRITE)); + tbuf[1] = set_tx_byte(0); + tbuf[2] = set_tx_byte(reg); + xfer_regindex.bits_per_word = 8; + xfer_regindex.len = 3; + spi_message_add_tail(&xfer_regindex, &msg); + + ret = spi_sync(spi, &msg); + + spi_message_init(&msg); + tbuf[0] = set_tx_byte(START_BYTE(ili922x_id, START_RS_REG, + START_RW_WRITE)); + tbuf[1] = set_tx_byte((value & 0xFF00) >> 8); + tbuf[2] = set_tx_byte(value & 0x00FF); + + xfer_regvalue.cs_change = 1; + xfer_regvalue.len = 3; + xfer_regvalue.tx_buf = tbuf; + xfer_regvalue.rx_buf = rbuf; + CHECK_FREQ_REG(spi, &xfer_regvalue); + + spi_message_add_tail(&xfer_regvalue, &msg); + + ret = spi_sync(spi, &msg); + if (ret < 0) { + dev_err(&spi->dev, "Error sending SPI message 0x%x", ret); + return ret; + } + return 0; +} + +#ifdef DEBUG +/** + * ili922x_reg_dump - dump all registers + * + * @spi: pointer to an SPI device + */ +static void ili922x_reg_dump(struct spi_device *spi) +{ + u8 reg; + u16 rx; + + dev_dbg(&spi->dev, "ILI922x configuration registers:\n"); + for (reg = REG_START_OSCILLATION; + reg <= REG_OTP_PROGRAMMING_ID_KEY; reg++) { + ili922x_read(spi, reg, &rx); + dev_dbg(&spi->dev, "reg @ 0x%02X: 0x%04X\n", reg, rx); + } +} +#else +static inline void ili922x_reg_dump(struct spi_device *spi) {} +#endif + +/** + * set_write_to_gram_reg - initialize the display to write the GRAM + * @spi: spi device + */ +static void set_write_to_gram_reg(struct spi_device *spi) +{ + struct spi_message msg; + struct spi_transfer xfer; + unsigned char tbuf[CMD_BUFSIZE]; + + memset(&xfer, 0, sizeof(struct spi_transfer)); + + spi_message_init(&msg); + xfer.tx_buf = tbuf; + xfer.rx_buf = NULL; + xfer.cs_change = 1; + + tbuf[0] = START_BYTE(ili922x_id, START_RS_INDEX, START_RW_WRITE); + tbuf[1] = 0; + tbuf[2] = REG_WRITE_DATA_TO_GRAM; + + xfer.bits_per_word = 8; + xfer.len = 3; + spi_message_add_tail(&xfer, &msg); + spi_sync(spi, &msg); +} + +/** + * ili922x_poweron - turn the display on + * @spi: spi device + * + * The sequence to turn on the display is taken from + * the datasheet and/or the example code provided by the + * manufacturer. + */ +static int ili922x_poweron(struct spi_device *spi) +{ + int ret; + + /* Power on */ + ret = ili922x_write(spi, REG_POWER_CONTROL_1, 0x0000); + usleep_range(10000, 10500); + ret += ili922x_write(spi, REG_POWER_CONTROL_2, 0x0000); + ret += ili922x_write(spi, REG_POWER_CONTROL_3, 0x0000); + msleep(40); + ret += ili922x_write(spi, REG_POWER_CONTROL_4, 0x0000); + msleep(40); + /* register 0x56 is not documented in the datasheet */ + ret += ili922x_write(spi, 0x56, 0x080F); + ret += ili922x_write(spi, REG_POWER_CONTROL_1, 0x4240); + usleep_range(10000, 10500); + ret += ili922x_write(spi, REG_POWER_CONTROL_2, 0x0000); + ret += ili922x_write(spi, REG_POWER_CONTROL_3, 0x0014); + msleep(40); + ret += ili922x_write(spi, REG_POWER_CONTROL_4, 0x1319); + msleep(40); + + return ret; +} + +/** + * ili922x_poweroff - turn the display off + * @spi: spi device + */ +static int ili922x_poweroff(struct spi_device *spi) +{ + int ret; + + /* Power off */ + ret = ili922x_write(spi, REG_POWER_CONTROL_1, 0x0000); + usleep_range(10000, 10500); + ret += ili922x_write(spi, REG_POWER_CONTROL_2, 0x0000); + ret += ili922x_write(spi, REG_POWER_CONTROL_3, 0x0000); + msleep(40); + ret += ili922x_write(spi, REG_POWER_CONTROL_4, 0x0000); + msleep(40); + + return ret; +} + +/** + * ili922x_display_init - initialize the display by setting + * the configuration registers + * @spi: spi device + */ +static void ili922x_display_init(struct spi_device *spi) +{ + ili922x_write(spi, REG_START_OSCILLATION, 1); + usleep_range(10000, 10500); + ili922x_write(spi, REG_DRIVER_OUTPUT_CONTROL, 0x691B); + ili922x_write(spi, REG_LCD_AC_DRIVEING_CONTROL, 0x0700); + ili922x_write(spi, REG_ENTRY_MODE, 0x1030); + ili922x_write(spi, REG_COMPARE_1, 0x0000); + ili922x_write(spi, REG_COMPARE_2, 0x0000); + ili922x_write(spi, REG_DISPLAY_CONTROL_1, 0x0037); + ili922x_write(spi, REG_DISPLAY_CONTROL_2, 0x0202); + ili922x_write(spi, REG_DISPLAY_CONTROL_3, 0x0000); + ili922x_write(spi, REG_FRAME_CYCLE_CONTROL, 0x0000); + + /* Set RGB interface */ + ili922x_write(spi, REG_EXT_INTF_CONTROL, 0x0110); + + ili922x_poweron(spi); + + ili922x_write(spi, REG_GAMMA_CONTROL_1, 0x0302); + ili922x_write(spi, REG_GAMMA_CONTROL_2, 0x0407); + ili922x_write(spi, REG_GAMMA_CONTROL_3, 0x0304); + ili922x_write(spi, REG_GAMMA_CONTROL_4, 0x0203); + ili922x_write(spi, REG_GAMMA_CONTROL_5, 0x0706); + ili922x_write(spi, REG_GAMMA_CONTROL_6, 0x0407); + ili922x_write(spi, REG_GAMMA_CONTROL_7, 0x0706); + ili922x_write(spi, REG_GAMMA_CONTROL_8, 0x0000); + ili922x_write(spi, REG_GAMMA_CONTROL_9, 0x0C06); + ili922x_write(spi, REG_GAMMA_CONTROL_10, 0x0F00); + ili922x_write(spi, REG_RAM_ADDRESS_SET, 0x0000); + ili922x_write(spi, REG_GATE_SCAN_CONTROL, 0x0000); + ili922x_write(spi, REG_VERT_SCROLL_CONTROL, 0x0000); + ili922x_write(spi, REG_FIRST_SCREEN_DRIVE_POS, 0xDB00); + ili922x_write(spi, REG_SECOND_SCREEN_DRIVE_POS, 0xDB00); + ili922x_write(spi, REG_RAM_ADDR_POS_H, 0xAF00); + ili922x_write(spi, REG_RAM_ADDR_POS_V, 0xDB00); + ili922x_reg_dump(spi); + set_write_to_gram_reg(spi); +} + +static int ili922x_lcd_power(struct ili922x *lcd, int power) +{ + int ret = 0; + + if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power)) + ret = ili922x_poweron(lcd->spi); + else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power)) + ret = ili922x_poweroff(lcd->spi); + + if (!ret) + lcd->power = power; + + return ret; +} + +static int ili922x_set_power(struct lcd_device *ld, int power) +{ + struct ili922x *ili = lcd_get_data(ld); + + return ili922x_lcd_power(ili, power); +} + +static int ili922x_get_power(struct lcd_device *ld) +{ + struct ili922x *ili = lcd_get_data(ld); + + return ili->power; +} + +static struct lcd_ops ili922x_ops = { + .get_power = ili922x_get_power, + .set_power = ili922x_set_power, +}; + +static int ili922x_probe(struct spi_device *spi) +{ + struct ili922x *ili; + struct lcd_device *lcd; + int ret; + u16 reg = 0; + + ili = devm_kzalloc(&spi->dev, sizeof(*ili), GFP_KERNEL); + if (!ili) + return -ENOMEM; + + ili->spi = spi; + spi_set_drvdata(spi, ili); + + /* check if the device is connected */ + ret = ili922x_read(spi, REG_DRIVER_CODE_READ, ®); + if (ret || ((reg & ILITEK_DEVICE_ID_MASK) != ILITEK_DEVICE_ID)) { + dev_err(&spi->dev, + "no LCD found: Chip ID 0x%x, ret %d\n", + reg, ret); + return -ENODEV; + } + + dev_info(&spi->dev, "ILI%x found, SPI freq %d, mode %d\n", + reg, spi->max_speed_hz, spi->mode); + + ret = ili922x_read_status(spi, ®); + if (ret) { + dev_err(&spi->dev, "reading RS failed...\n"); + return ret; + } + + dev_dbg(&spi->dev, "status: 0x%x\n", reg); + + ili922x_display_init(spi); + + ili->power = FB_BLANK_POWERDOWN; + + lcd = devm_lcd_device_register(&spi->dev, "ili922xlcd", &spi->dev, ili, + &ili922x_ops); + if (IS_ERR(lcd)) { + dev_err(&spi->dev, "cannot register LCD\n"); + return PTR_ERR(lcd); + } + + ili->ld = lcd; + spi_set_drvdata(spi, ili); + + ili922x_lcd_power(ili, FB_BLANK_UNBLANK); + + return 0; +} + +static void ili922x_remove(struct spi_device *spi) +{ + ili922x_poweroff(spi); +} + +static struct spi_driver ili922x_driver = { + .driver = { + .name = "ili922x", + }, + .probe = ili922x_probe, + .remove = ili922x_remove, +}; + +module_spi_driver(ili922x_driver); + +MODULE_AUTHOR("Stefano Babic <sbabic@denx.de>"); +MODULE_DESCRIPTION("ILI9221/9222 LCD driver"); +MODULE_LICENSE("GPL"); +MODULE_PARM_DESC(ili922x_id, "set controller identifier (default=1)"); +MODULE_PARM_DESC(tx_invert, "invert bytes before sending"); diff --git a/drivers/video/backlight/ili9320.c b/drivers/video/backlight/ili9320.c new file mode 100644 index 0000000000..2acd2708f8 --- /dev/null +++ b/drivers/video/backlight/ili9320.c @@ -0,0 +1,299 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* drivers/video/backlight/ili9320.c + * + * ILI9320 LCD controller driver core. + * + * Copyright 2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> +*/ + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/fb.h> +#include <linux/init.h> +#include <linux/lcd.h> +#include <linux/module.h> +#include <linux/slab.h> + +#include <linux/spi/spi.h> + +#include <video/ili9320.h> + +#include "ili9320.h" + + +static inline int ili9320_write_spi(struct ili9320 *ili, + unsigned int reg, + unsigned int value) +{ + struct ili9320_spi *spi = &ili->access.spi; + unsigned char *addr = spi->buffer_addr; + unsigned char *data = spi->buffer_data; + + /* spi message consits of: + * first byte: ID and operation + */ + + addr[0] = spi->id | ILI9320_SPI_INDEX | ILI9320_SPI_WRITE; + addr[1] = reg >> 8; + addr[2] = reg; + + /* second message is the data to transfer */ + + data[0] = spi->id | ILI9320_SPI_DATA | ILI9320_SPI_WRITE; + data[1] = value >> 8; + data[2] = value; + + return spi_sync(spi->dev, &spi->message); +} + +int ili9320_write(struct ili9320 *ili, unsigned int reg, unsigned int value) +{ + dev_dbg(ili->dev, "write: reg=%02x, val=%04x\n", reg, value); + return ili->write(ili, reg, value); +} +EXPORT_SYMBOL_GPL(ili9320_write); + +int ili9320_write_regs(struct ili9320 *ili, + const struct ili9320_reg *values, + int nr_values) +{ + int index; + int ret; + + for (index = 0; index < nr_values; index++, values++) { + ret = ili9320_write(ili, values->address, values->value); + if (ret != 0) + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(ili9320_write_regs); + +static void ili9320_reset(struct ili9320 *lcd) +{ + struct ili9320_platdata *cfg = lcd->platdata; + + cfg->reset(1); + mdelay(50); + + cfg->reset(0); + mdelay(50); + + cfg->reset(1); + mdelay(100); +} + +static inline int ili9320_init_chip(struct ili9320 *lcd) +{ + int ret; + + ili9320_reset(lcd); + + ret = lcd->client->init(lcd, lcd->platdata); + if (ret != 0) { + dev_err(lcd->dev, "failed to initialise display\n"); + return ret; + } + + lcd->initialised = 1; + return 0; +} + +static inline int ili9320_power_on(struct ili9320 *lcd) +{ + if (!lcd->initialised) + ili9320_init_chip(lcd); + + lcd->display1 |= (ILI9320_DISPLAY1_D(3) | ILI9320_DISPLAY1_BASEE); + ili9320_write(lcd, ILI9320_DISPLAY1, lcd->display1); + + return 0; +} + +static inline int ili9320_power_off(struct ili9320 *lcd) +{ + lcd->display1 &= ~(ILI9320_DISPLAY1_D(3) | ILI9320_DISPLAY1_BASEE); + ili9320_write(lcd, ILI9320_DISPLAY1, lcd->display1); + + return 0; +} + +#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL) + +static int ili9320_power(struct ili9320 *lcd, int power) +{ + int ret = 0; + + dev_dbg(lcd->dev, "power %d => %d\n", lcd->power, power); + + if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power)) + ret = ili9320_power_on(lcd); + else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power)) + ret = ili9320_power_off(lcd); + + if (ret == 0) + lcd->power = power; + else + dev_warn(lcd->dev, "failed to set power mode %d\n", power); + + return ret; +} + +static inline struct ili9320 *to_our_lcd(struct lcd_device *lcd) +{ + return lcd_get_data(lcd); +} + +static int ili9320_set_power(struct lcd_device *ld, int power) +{ + struct ili9320 *lcd = to_our_lcd(ld); + + return ili9320_power(lcd, power); +} + +static int ili9320_get_power(struct lcd_device *ld) +{ + struct ili9320 *lcd = to_our_lcd(ld); + + return lcd->power; +} + +static struct lcd_ops ili9320_ops = { + .get_power = ili9320_get_power, + .set_power = ili9320_set_power, +}; + +static void ili9320_setup_spi(struct ili9320 *ili, + struct spi_device *dev) +{ + struct ili9320_spi *spi = &ili->access.spi; + + ili->write = ili9320_write_spi; + spi->dev = dev; + + /* fill the two messages we are going to use to send the data + * with, the first the address followed by the data. The datasheet + * says they should be done as two distinct cycles of the SPI CS line. + */ + + spi->xfer[0].tx_buf = spi->buffer_addr; + spi->xfer[1].tx_buf = spi->buffer_data; + spi->xfer[0].len = 3; + spi->xfer[1].len = 3; + spi->xfer[0].bits_per_word = 8; + spi->xfer[1].bits_per_word = 8; + spi->xfer[0].cs_change = 1; + + spi_message_init(&spi->message); + spi_message_add_tail(&spi->xfer[0], &spi->message); + spi_message_add_tail(&spi->xfer[1], &spi->message); +} + +int ili9320_probe_spi(struct spi_device *spi, + struct ili9320_client *client) +{ + struct ili9320_platdata *cfg = dev_get_platdata(&spi->dev); + struct device *dev = &spi->dev; + struct ili9320 *ili; + struct lcd_device *lcd; + int ret = 0; + + /* verify we where given some information */ + + if (cfg == NULL) { + dev_err(dev, "no platform data supplied\n"); + return -EINVAL; + } + + if (cfg->hsize <= 0 || cfg->vsize <= 0 || cfg->reset == NULL) { + dev_err(dev, "invalid platform data supplied\n"); + return -EINVAL; + } + + /* allocate and initialse our state */ + + ili = devm_kzalloc(&spi->dev, sizeof(struct ili9320), GFP_KERNEL); + if (ili == NULL) + return -ENOMEM; + + ili->access.spi.id = ILI9320_SPI_IDCODE | ILI9320_SPI_ID(1); + + ili->dev = dev; + ili->client = client; + ili->power = FB_BLANK_POWERDOWN; + ili->platdata = cfg; + + spi_set_drvdata(spi, ili); + + ili9320_setup_spi(ili, spi); + + lcd = devm_lcd_device_register(&spi->dev, "ili9320", dev, ili, + &ili9320_ops); + if (IS_ERR(lcd)) { + dev_err(dev, "failed to register lcd device\n"); + return PTR_ERR(lcd); + } + + ili->lcd = lcd; + + dev_info(dev, "initialising %s\n", client->name); + + ret = ili9320_power(ili, FB_BLANK_UNBLANK); + if (ret != 0) { + dev_err(dev, "failed to set lcd power state\n"); + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(ili9320_probe_spi); + +void ili9320_remove(struct ili9320 *ili) +{ + ili9320_power(ili, FB_BLANK_POWERDOWN); +} +EXPORT_SYMBOL_GPL(ili9320_remove); + +#ifdef CONFIG_PM_SLEEP +int ili9320_suspend(struct ili9320 *lcd) +{ + int ret; + + ret = ili9320_power(lcd, FB_BLANK_POWERDOWN); + + if (lcd->platdata->suspend == ILI9320_SUSPEND_DEEP) { + ili9320_write(lcd, ILI9320_POWER1, lcd->power1 | + ILI9320_POWER1_SLP | + ILI9320_POWER1_DSTB); + lcd->initialised = 0; + } + + return ret; +} +EXPORT_SYMBOL_GPL(ili9320_suspend); + +int ili9320_resume(struct ili9320 *lcd) +{ + dev_info(lcd->dev, "resuming from power state %d\n", lcd->power); + + if (lcd->platdata->suspend == ILI9320_SUSPEND_DEEP) + ili9320_write(lcd, ILI9320_POWER1, 0x00); + + return ili9320_power(lcd, FB_BLANK_UNBLANK); +} +EXPORT_SYMBOL_GPL(ili9320_resume); +#endif + +/* Power down all displays on reboot, poweroff or halt */ +void ili9320_shutdown(struct ili9320 *lcd) +{ + ili9320_power(lcd, FB_BLANK_POWERDOWN); +} +EXPORT_SYMBOL_GPL(ili9320_shutdown); + +MODULE_AUTHOR("Ben Dooks <ben-linux@fluff.org>"); +MODULE_DESCRIPTION("ILI9320 LCD Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/video/backlight/ili9320.h b/drivers/video/backlight/ili9320.h new file mode 100644 index 0000000000..8213cc6e91 --- /dev/null +++ b/drivers/video/backlight/ili9320.h @@ -0,0 +1,77 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* drivers/video/backlight/ili9320.h + * + * ILI9320 LCD controller driver core. + * + * Copyright 2007 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * http://armlinux.simtec.co.uk/ +*/ + +/* Holder for register and value pairs. */ +struct ili9320_reg { + unsigned short address; + unsigned short value; +}; + +struct ili9320; + +struct ili9320_client { + const char *name; + int (*init)(struct ili9320 *ili, struct ili9320_platdata *cfg); + +}; +/* Device attached via an SPI bus. */ +struct ili9320_spi { + struct spi_device *dev; + struct spi_message message; + struct spi_transfer xfer[2]; + + unsigned char id; + unsigned char buffer_addr[4]; + unsigned char buffer_data[4]; +}; + +/* ILI9320 device state. */ +struct ili9320 { + union { + struct ili9320_spi spi; /* SPI attachged device. */ + } access; /* Register access method. */ + + struct device *dev; + struct lcd_device *lcd; /* LCD device we created. */ + struct ili9320_client *client; + struct ili9320_platdata *platdata; + + int power; /* current power state. */ + int initialised; + + unsigned short display1; + unsigned short power1; + + int (*write)(struct ili9320 *ili, unsigned int reg, unsigned int val); +}; + + +/* ILI9320 register access routines */ + +extern int ili9320_write(struct ili9320 *ili, + unsigned int reg, unsigned int value); + +extern int ili9320_write_regs(struct ili9320 *ili, + const struct ili9320_reg *values, + int nr_values); + +/* Device probe */ + +extern int ili9320_probe_spi(struct spi_device *spi, + struct ili9320_client *cli); + +extern void ili9320_remove(struct ili9320 *lcd); +extern void ili9320_shutdown(struct ili9320 *lcd); + +/* PM */ + +extern int ili9320_suspend(struct ili9320 *lcd); +extern int ili9320_resume(struct ili9320 *lcd); diff --git a/drivers/video/backlight/ipaq_micro_bl.c b/drivers/video/backlight/ipaq_micro_bl.c new file mode 100644 index 0000000000..f595b8c8cb --- /dev/null +++ b/drivers/video/backlight/ipaq_micro_bl.c @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * + * iPAQ microcontroller backlight support + * Author : Linus Walleij <linus.walleij@linaro.org> + */ + +#include <linux/backlight.h> +#include <linux/err.h> +#include <linux/fb.h> +#include <linux/init.h> +#include <linux/mfd/ipaq-micro.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +static int micro_bl_update_status(struct backlight_device *bd) +{ + struct ipaq_micro *micro = dev_get_drvdata(&bd->dev); + int intensity = backlight_get_brightness(bd); + struct ipaq_micro_msg msg = { + .id = MSG_BACKLIGHT, + .tx_len = 3, + }; + + /* + * Message format: + * Byte 0: backlight instance (usually 1) + * Byte 1: on/off + * Byte 2: intensity, 0-255 + */ + msg.tx_data[0] = 0x01; + msg.tx_data[1] = intensity > 0 ? 1 : 0; + msg.tx_data[2] = intensity; + return ipaq_micro_tx_msg_sync(micro, &msg); +} + +static const struct backlight_ops micro_bl_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = micro_bl_update_status, +}; + +static const struct backlight_properties micro_bl_props = { + .type = BACKLIGHT_RAW, + .max_brightness = 255, + .power = FB_BLANK_UNBLANK, + .brightness = 64, +}; + +static int micro_backlight_probe(struct platform_device *pdev) +{ + struct backlight_device *bd; + struct ipaq_micro *micro = dev_get_drvdata(pdev->dev.parent); + + bd = devm_backlight_device_register(&pdev->dev, "ipaq-micro-backlight", + &pdev->dev, micro, µ_bl_ops, + µ_bl_props); + if (IS_ERR(bd)) + return PTR_ERR(bd); + + platform_set_drvdata(pdev, bd); + backlight_update_status(bd); + + return 0; +} + +static struct platform_driver micro_backlight_device_driver = { + .driver = { + .name = "ipaq-micro-backlight", + }, + .probe = micro_backlight_probe, +}; +module_platform_driver(micro_backlight_device_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("driver for iPAQ Atmel micro backlight"); +MODULE_ALIAS("platform:ipaq-micro-backlight"); diff --git a/drivers/video/backlight/jornada720_bl.c b/drivers/video/backlight/jornada720_bl.c new file mode 100644 index 0000000000..066d0dc98f --- /dev/null +++ b/drivers/video/backlight/jornada720_bl.c @@ -0,0 +1,150 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * + * Backlight driver for HP Jornada 700 series (710/720/728) + * Copyright (C) 2006-2009 Kristoffer Ericson <kristoffer.ericson@gmail.com> + */ + +#include <linux/backlight.h> +#include <linux/device.h> +#include <linux/fb.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include <mach/jornada720.h> +#include <mach/hardware.h> + +#include <video/s1d13xxxfb.h> + +#define BL_MAX_BRIGHT 255 +#define BL_DEF_BRIGHT 25 + +static int jornada_bl_get_brightness(struct backlight_device *bd) +{ + int ret; + + /* check if backlight is on */ + if (!(PPSR & PPC_LDD1)) + return 0; + + jornada_ssp_start(); + + /* cmd should return txdummy */ + ret = jornada_ssp_byte(GETBRIGHTNESS); + + if (jornada_ssp_byte(GETBRIGHTNESS) != TXDUMMY) { + dev_err(&bd->dev, "get brightness timeout\n"); + jornada_ssp_end(); + return -ETIMEDOUT; + } + + /* exchange txdummy for value */ + ret = jornada_ssp_byte(TXDUMMY); + + jornada_ssp_end(); + + return BL_MAX_BRIGHT - ret; +} + +static int jornada_bl_update_status(struct backlight_device *bd) +{ + int ret = 0; + + jornada_ssp_start(); + + /* If backlight is off then really turn it off */ + if (backlight_is_blank(bd)) { + ret = jornada_ssp_byte(BRIGHTNESSOFF); + if (ret != TXDUMMY) { + dev_info(&bd->dev, "brightness off timeout\n"); + /* turn off backlight */ + PPSR &= ~PPC_LDD1; + PPDR |= PPC_LDD1; + ret = -ETIMEDOUT; + } + } else /* turn on backlight */ + PPSR |= PPC_LDD1; + + /* send command to our mcu */ + if (jornada_ssp_byte(SETBRIGHTNESS) != TXDUMMY) { + dev_info(&bd->dev, "failed to set brightness\n"); + ret = -ETIMEDOUT; + goto out; + } + + /* + * at this point we expect that the mcu has accepted + * our command and is waiting for our new value + * please note that maximum brightness is 255, + * but due to physical layout it is equal to 0, so we simply + * invert the value (MAX VALUE - NEW VALUE). + */ + if (jornada_ssp_byte(BL_MAX_BRIGHT - bd->props.brightness) + != TXDUMMY) { + dev_err(&bd->dev, "set brightness failed\n"); + ret = -ETIMEDOUT; + } + + /* + * If infact we get an TXDUMMY as output we are happy and dont + * make any further comments about it + */ +out: + jornada_ssp_end(); + + return ret; +} + +static const struct backlight_ops jornada_bl_ops = { + .get_brightness = jornada_bl_get_brightness, + .update_status = jornada_bl_update_status, + .options = BL_CORE_SUSPENDRESUME, +}; + +static int jornada_bl_probe(struct platform_device *pdev) +{ + struct backlight_properties props; + int ret; + struct backlight_device *bd; + + memset(&props, 0, sizeof(struct backlight_properties)); + props.type = BACKLIGHT_RAW; + props.max_brightness = BL_MAX_BRIGHT; + + bd = devm_backlight_device_register(&pdev->dev, S1D_DEVICENAME, + &pdev->dev, NULL, &jornada_bl_ops, + &props); + if (IS_ERR(bd)) { + ret = PTR_ERR(bd); + dev_err(&pdev->dev, "failed to register device, err=%x\n", ret); + return ret; + } + + bd->props.power = FB_BLANK_UNBLANK; + bd->props.brightness = BL_DEF_BRIGHT; + /* + * note. make sure max brightness is set otherwise + * you will get seemingly non-related errors when + * trying to change brightness + */ + jornada_bl_update_status(bd); + + platform_set_drvdata(pdev, bd); + dev_info(&pdev->dev, "HP Jornada 700 series backlight driver\n"); + + return 0; +} + +static struct platform_driver jornada_bl_driver = { + .probe = jornada_bl_probe, + .driver = { + .name = "jornada_bl", + }, +}; + +module_platform_driver(jornada_bl_driver); + +MODULE_AUTHOR("Kristoffer Ericson <kristoffer.ericson>"); +MODULE_DESCRIPTION("HP Jornada 710/720/728 Backlight driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/backlight/jornada720_lcd.c b/drivers/video/backlight/jornada720_lcd.c new file mode 100644 index 0000000000..6796a7c2db --- /dev/null +++ b/drivers/video/backlight/jornada720_lcd.c @@ -0,0 +1,127 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * + * LCD driver for HP Jornada 700 series (710/720/728) + * Copyright (C) 2006-2009 Kristoffer Ericson <kristoffer.ericson@gmail.com> + */ + +#include <linux/device.h> +#include <linux/fb.h> +#include <linux/kernel.h> +#include <linux/lcd.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/delay.h> + +#include <mach/jornada720.h> +#include <mach/hardware.h> + +#include <video/s1d13xxxfb.h> + +#define LCD_MAX_CONTRAST 0xff +#define LCD_DEF_CONTRAST 0x80 + +static int jornada_lcd_get_power(struct lcd_device *ld) +{ + return PPSR & PPC_LDD2 ? FB_BLANK_UNBLANK : FB_BLANK_POWERDOWN; +} + +static int jornada_lcd_get_contrast(struct lcd_device *ld) +{ + int ret; + + if (jornada_lcd_get_power(ld) != FB_BLANK_UNBLANK) + return 0; + + jornada_ssp_start(); + + if (jornada_ssp_byte(GETCONTRAST) == TXDUMMY) { + ret = jornada_ssp_byte(TXDUMMY); + goto success; + } + + dev_err(&ld->dev, "failed to set contrast\n"); + ret = -ETIMEDOUT; + +success: + jornada_ssp_end(); + return ret; +} + +static int jornada_lcd_set_contrast(struct lcd_device *ld, int value) +{ + int ret = 0; + + jornada_ssp_start(); + + /* start by sending our set contrast cmd to mcu */ + if (jornada_ssp_byte(SETCONTRAST) == TXDUMMY) { + /* if successful push the new value */ + if (jornada_ssp_byte(value) == TXDUMMY) + goto success; + } + + dev_err(&ld->dev, "failed to set contrast\n"); + ret = -ETIMEDOUT; + +success: + jornada_ssp_end(); + return ret; +} + +static int jornada_lcd_set_power(struct lcd_device *ld, int power) +{ + if (power != FB_BLANK_UNBLANK) { + PPSR &= ~PPC_LDD2; + PPDR |= PPC_LDD2; + } else { + PPSR |= PPC_LDD2; + } + + return 0; +} + +static struct lcd_ops jornada_lcd_props = { + .get_contrast = jornada_lcd_get_contrast, + .set_contrast = jornada_lcd_set_contrast, + .get_power = jornada_lcd_get_power, + .set_power = jornada_lcd_set_power, +}; + +static int jornada_lcd_probe(struct platform_device *pdev) +{ + struct lcd_device *lcd_device; + int ret; + + lcd_device = devm_lcd_device_register(&pdev->dev, S1D_DEVICENAME, + &pdev->dev, NULL, &jornada_lcd_props); + + if (IS_ERR(lcd_device)) { + ret = PTR_ERR(lcd_device); + dev_err(&pdev->dev, "failed to register device\n"); + return ret; + } + + platform_set_drvdata(pdev, lcd_device); + + /* lets set our default values */ + jornada_lcd_set_contrast(lcd_device, LCD_DEF_CONTRAST); + jornada_lcd_set_power(lcd_device, FB_BLANK_UNBLANK); + /* give it some time to startup */ + msleep(100); + + return 0; +} + +static struct platform_driver jornada_lcd_driver = { + .probe = jornada_lcd_probe, + .driver = { + .name = "jornada_lcd", + }, +}; + +module_platform_driver(jornada_lcd_driver); + +MODULE_AUTHOR("Kristoffer Ericson <kristoffer.ericson@gmail.com>"); +MODULE_DESCRIPTION("HP Jornada 710/720/728 LCD driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/backlight/kb3886_bl.c b/drivers/video/backlight/kb3886_bl.c new file mode 100644 index 0000000000..55794b239c --- /dev/null +++ b/drivers/video/backlight/kb3886_bl.c @@ -0,0 +1,189 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Backlight Driver for the KB3886 Backlight + * + * Copyright (c) 2007-2008 Claudio Nieder + * + * Based on corgi_bl.c by Richard Purdie and kb3886 driver by Robert Woerle + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mutex.h> +#include <linux/fb.h> +#include <linux/backlight.h> +#include <linux/delay.h> +#include <linux/dmi.h> + +#define KB3886_PARENT 0x64 +#define KB3886_IO 0x60 +#define KB3886_ADC_DAC_PWM 0xC4 +#define KB3886_PWM0_WRITE 0x81 +#define KB3886_PWM0_READ 0x41 + +static DEFINE_MUTEX(bl_mutex); + +static void kb3886_bl_set_intensity(int intensity) +{ + mutex_lock(&bl_mutex); + intensity = intensity&0xff; + outb(KB3886_ADC_DAC_PWM, KB3886_PARENT); + usleep_range(10000, 11000); + outb(KB3886_PWM0_WRITE, KB3886_IO); + usleep_range(10000, 11000); + outb(intensity, KB3886_IO); + mutex_unlock(&bl_mutex); +} + +struct kb3886bl_machinfo { + int max_intensity; + int default_intensity; + int limit_mask; + void (*set_bl_intensity)(int intensity); +}; + +static struct kb3886bl_machinfo kb3886_bl_machinfo = { + .max_intensity = 0xff, + .default_intensity = 0xa0, + .limit_mask = 0x7f, + .set_bl_intensity = kb3886_bl_set_intensity, +}; + +static struct platform_device kb3886bl_device = { + .name = "kb3886-bl", + .dev = { + .platform_data = &kb3886_bl_machinfo, + }, + .id = -1, +}; + +static struct platform_device *devices[] __initdata = { + &kb3886bl_device, +}; + +/* + * Back to driver + */ + +static int kb3886bl_intensity; +static struct backlight_device *kb3886_backlight_device; +static struct kb3886bl_machinfo *bl_machinfo; + +static unsigned long kb3886bl_flags; +#define KB3886BL_SUSPENDED 0x01 + +static const struct dmi_system_id kb3886bl_device_table[] __initconst = { + { + .ident = "Sahara Touch-iT", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SDV"), + DMI_MATCH(DMI_PRODUCT_NAME, "iTouch T201"), + }, + }, + { } +}; + +static int kb3886bl_send_intensity(struct backlight_device *bd) +{ + int intensity = backlight_get_brightness(bd); + + if (kb3886bl_flags & KB3886BL_SUSPENDED) + intensity = 0; + + bl_machinfo->set_bl_intensity(intensity); + + kb3886bl_intensity = intensity; + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int kb3886bl_suspend(struct device *dev) +{ + struct backlight_device *bd = dev_get_drvdata(dev); + + kb3886bl_flags |= KB3886BL_SUSPENDED; + backlight_update_status(bd); + return 0; +} + +static int kb3886bl_resume(struct device *dev) +{ + struct backlight_device *bd = dev_get_drvdata(dev); + + kb3886bl_flags &= ~KB3886BL_SUSPENDED; + backlight_update_status(bd); + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(kb3886bl_pm_ops, kb3886bl_suspend, kb3886bl_resume); + +static int kb3886bl_get_intensity(struct backlight_device *bd) +{ + return kb3886bl_intensity; +} + +static const struct backlight_ops kb3886bl_ops = { + .get_brightness = kb3886bl_get_intensity, + .update_status = kb3886bl_send_intensity, +}; + +static int kb3886bl_probe(struct platform_device *pdev) +{ + struct backlight_properties props; + struct kb3886bl_machinfo *machinfo = dev_get_platdata(&pdev->dev); + + bl_machinfo = machinfo; + if (!machinfo->limit_mask) + machinfo->limit_mask = -1; + + memset(&props, 0, sizeof(struct backlight_properties)); + props.type = BACKLIGHT_RAW; + props.max_brightness = machinfo->max_intensity; + kb3886_backlight_device = devm_backlight_device_register(&pdev->dev, + "kb3886-bl", &pdev->dev, + NULL, &kb3886bl_ops, + &props); + if (IS_ERR(kb3886_backlight_device)) + return PTR_ERR(kb3886_backlight_device); + + platform_set_drvdata(pdev, kb3886_backlight_device); + + kb3886_backlight_device->props.power = FB_BLANK_UNBLANK; + kb3886_backlight_device->props.brightness = machinfo->default_intensity; + backlight_update_status(kb3886_backlight_device); + + return 0; +} + +static struct platform_driver kb3886bl_driver = { + .probe = kb3886bl_probe, + .driver = { + .name = "kb3886-bl", + .pm = &kb3886bl_pm_ops, + }, +}; + +static int __init kb3886_init(void) +{ + if (!dmi_check_system(kb3886bl_device_table)) + return -ENODEV; + + platform_add_devices(devices, ARRAY_SIZE(devices)); + return platform_driver_register(&kb3886bl_driver); +} + +static void __exit kb3886_exit(void) +{ + platform_driver_unregister(&kb3886bl_driver); +} + +module_init(kb3886_init); +module_exit(kb3886_exit); + +MODULE_AUTHOR("Claudio Nieder <private@claudio.ch>"); +MODULE_DESCRIPTION("Tabletkiosk Sahara Touch-iT Backlight Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("dmi:*:svnSDV:pniTouchT201:*"); diff --git a/drivers/video/backlight/ktd253-backlight.c b/drivers/video/backlight/ktd253-backlight.c new file mode 100644 index 0000000000..d7d43454f6 --- /dev/null +++ b/drivers/video/backlight/ktd253-backlight.c @@ -0,0 +1,225 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Backlight driver for the Kinetic KTD253 + * Based on code and know-how from the Samsung GT-S7710 + * Gareth Phillips <gareth.phillips@samsung.com> + */ +#include <linux/backlight.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/fb.h> +#include <linux/gpio/consumer.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/limits.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/slab.h> + +/* Current ratio is n/32 from 1/32 to 32/32 */ +#define KTD253_MIN_RATIO 1 +#define KTD253_MAX_RATIO 32 +#define KTD253_DEFAULT_RATIO 13 + +#define KTD253_T_LOW_NS (200 + 10) /* Additional 10ns as safety factor */ +#define KTD253_T_HIGH_NS (200 + 10) /* Additional 10ns as safety factor */ +#define KTD253_T_OFF_CRIT_NS 100000 /* 100 us, now it doesn't look good */ +#define KTD253_T_OFF_MS 3 + +struct ktd253_backlight { + struct device *dev; + struct backlight_device *bl; + struct gpio_desc *gpiod; + u16 ratio; +}; + +static void ktd253_backlight_set_max_ratio(struct ktd253_backlight *ktd253) +{ + gpiod_set_value_cansleep(ktd253->gpiod, 1); + ndelay(KTD253_T_HIGH_NS); + /* We always fall back to this when we power on */ +} + +static int ktd253_backlight_stepdown(struct ktd253_backlight *ktd253) +{ + /* + * These GPIO operations absolutely can NOT sleep so no _cansleep + * suffixes, and no using GPIO expanders on slow buses for this! + * + * The maximum number of cycles of the loop is 32 so the time taken + * should nominally be: + * (T_LOW_NS + T_HIGH_NS + loop_time) * 32 + * + * Architectures do not always support ndelay() and we will get a few us + * instead. If we get to a critical time limit an interrupt has likely + * occured in the low part of the loop and we need to restart from the + * top so we have the backlight in a known state. + */ + u64 ns; + + ns = ktime_get_ns(); + gpiod_set_value(ktd253->gpiod, 0); + ndelay(KTD253_T_LOW_NS); + gpiod_set_value(ktd253->gpiod, 1); + ns = ktime_get_ns() - ns; + if (ns >= KTD253_T_OFF_CRIT_NS) { + dev_err(ktd253->dev, "PCM on backlight took too long (%llu ns)\n", ns); + return -EAGAIN; + } + ndelay(KTD253_T_HIGH_NS); + return 0; +} + +static int ktd253_backlight_update_status(struct backlight_device *bl) +{ + struct ktd253_backlight *ktd253 = bl_get_data(bl); + int brightness = backlight_get_brightness(bl); + u16 target_ratio; + u16 current_ratio = ktd253->ratio; + int ret; + + dev_dbg(ktd253->dev, "new brightness/ratio: %d/32\n", brightness); + + target_ratio = brightness; + + if (target_ratio == current_ratio) + /* This is already right */ + return 0; + + if (target_ratio == 0) { + gpiod_set_value_cansleep(ktd253->gpiod, 0); + /* + * We need to keep the GPIO low for at least this long + * to actually switch the KTD253 off. + */ + msleep(KTD253_T_OFF_MS); + ktd253->ratio = 0; + return 0; + } + + if (current_ratio == 0) { + ktd253_backlight_set_max_ratio(ktd253); + current_ratio = KTD253_MAX_RATIO; + } + + while (current_ratio != target_ratio) { + /* + * These GPIO operations absolutely can NOT sleep so no + * _cansleep suffixes, and no using GPIO expanders on + * slow buses for this! + */ + ret = ktd253_backlight_stepdown(ktd253); + if (ret == -EAGAIN) { + /* + * Something disturbed the backlight setting code when + * running so we need to bring the PWM back to a known + * state. This shouldn't happen too much. + */ + gpiod_set_value_cansleep(ktd253->gpiod, 0); + msleep(KTD253_T_OFF_MS); + ktd253_backlight_set_max_ratio(ktd253); + current_ratio = KTD253_MAX_RATIO; + } else if (current_ratio == KTD253_MIN_RATIO) { + /* After 1/32 we loop back to 32/32 */ + current_ratio = KTD253_MAX_RATIO; + } else { + current_ratio--; + } + } + ktd253->ratio = current_ratio; + + dev_dbg(ktd253->dev, "new ratio set to %d/32\n", target_ratio); + + return 0; +} + +static const struct backlight_ops ktd253_backlight_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = ktd253_backlight_update_status, +}; + +static int ktd253_backlight_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct backlight_device *bl; + struct ktd253_backlight *ktd253; + u32 max_brightness; + u32 brightness; + int ret; + + ktd253 = devm_kzalloc(dev, sizeof(*ktd253), GFP_KERNEL); + if (!ktd253) + return -ENOMEM; + ktd253->dev = dev; + + ret = device_property_read_u32(dev, "max-brightness", &max_brightness); + if (ret) + max_brightness = KTD253_MAX_RATIO; + if (max_brightness > KTD253_MAX_RATIO) { + /* Clamp brightness to hardware max */ + dev_err(dev, "illegal max brightness specified\n"); + max_brightness = KTD253_MAX_RATIO; + } + + ret = device_property_read_u32(dev, "default-brightness", &brightness); + if (ret) + brightness = KTD253_DEFAULT_RATIO; + if (brightness > max_brightness) { + /* Clamp default brightness to max brightness */ + dev_err(dev, "default brightness exceeds max brightness\n"); + brightness = max_brightness; + } + + ktd253->gpiod = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); + if (IS_ERR(ktd253->gpiod)) + return dev_err_probe(dev, PTR_ERR(ktd253->gpiod), + "gpio line missing or invalid.\n"); + gpiod_set_consumer_name(ktd253->gpiod, dev_name(dev)); + /* Bring backlight to a known off state */ + msleep(KTD253_T_OFF_MS); + + bl = devm_backlight_device_register(dev, dev_name(dev), dev, ktd253, + &ktd253_backlight_ops, NULL); + if (IS_ERR(bl)) { + dev_err(dev, "failed to register backlight\n"); + return PTR_ERR(bl); + } + bl->props.max_brightness = max_brightness; + /* When we just enable the GPIO line we set max brightness */ + if (brightness) { + bl->props.brightness = brightness; + bl->props.power = FB_BLANK_UNBLANK; + } else { + bl->props.brightness = 0; + bl->props.power = FB_BLANK_POWERDOWN; + } + + ktd253->bl = bl; + platform_set_drvdata(pdev, bl); + backlight_update_status(bl); + + return 0; +} + +static const struct of_device_id ktd253_backlight_of_match[] = { + { .compatible = "kinetic,ktd253" }, + { .compatible = "kinetic,ktd259" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, ktd253_backlight_of_match); + +static struct platform_driver ktd253_backlight_driver = { + .driver = { + .name = "ktd253-backlight", + .of_match_table = ktd253_backlight_of_match, + }, + .probe = ktd253_backlight_probe, +}; +module_platform_driver(ktd253_backlight_driver); + +MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); +MODULE_DESCRIPTION("Kinetic KTD253 Backlight Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:ktd253-backlight"); diff --git a/drivers/video/backlight/ktz8866.c b/drivers/video/backlight/ktz8866.c new file mode 100644 index 0000000000..9c980f2571 --- /dev/null +++ b/drivers/video/backlight/ktz8866.c @@ -0,0 +1,208 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Backlight driver for the Kinetic KTZ8866 + * + * Copyright (C) 2022, 2023 Jianhua Lu <lujianhua000@gmail.com> + */ + +#include <linux/backlight.h> +#include <linux/err.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regmap.h> + +#define DEFAULT_BRIGHTNESS 1500 +#define MAX_BRIGHTNESS 2047 +#define REG_MAX 0x15 + +/* reg */ +#define DEVICE_ID 0x01 +#define BL_CFG1 0x02 +#define BL_CFG2 0x03 +#define BL_BRT_LSB 0x04 +#define BL_BRT_MSB 0x05 +#define BL_EN 0x08 +#define LCD_BIAS_CFG1 0x09 +#define LCD_BIAS_CFG2 0x0A +#define LCD_BIAS_CFG3 0x0B +#define LCD_BOOST_CFG 0x0C +#define OUTP_CFG 0x0D +#define OUTN_CFG 0x0E +#define FLAG 0x0F +#define BL_OPTION1 0x10 +#define BL_OPTION2 0x11 +#define PWM2DIG_LSBs 0x12 +#define PWM2DIG_MSBs 0x13 +#define BL_DIMMING 0x14 +#define PWM_RAMP_TIME 0x15 + +/* definition */ +#define BL_EN_BIT BIT(6) +#define LCD_BIAS_EN 0x9F +#define PWM_HYST 0x5 + +struct ktz8866 { + struct i2c_client *client; + struct regmap *regmap; + bool led_on; + struct gpio_desc *enable_gpio; +}; + +static const struct regmap_config ktz8866_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = REG_MAX, +}; + +static int ktz8866_write(struct ktz8866 *ktz, unsigned int reg, + unsigned int val) +{ + return regmap_write(ktz->regmap, reg, val); +} + +static int ktz8866_update_bits(struct ktz8866 *ktz, unsigned int reg, + unsigned int mask, unsigned int val) +{ + return regmap_update_bits(ktz->regmap, reg, mask, val); +} + +static int ktz8866_backlight_update_status(struct backlight_device *backlight_dev) +{ + struct ktz8866 *ktz = bl_get_data(backlight_dev); + unsigned int brightness = backlight_get_brightness(backlight_dev); + + if (!ktz->led_on && brightness > 0) { + ktz8866_update_bits(ktz, BL_EN, BL_EN_BIT, BL_EN_BIT); + ktz->led_on = true; + } else if (brightness == 0) { + ktz8866_update_bits(ktz, BL_EN, BL_EN_BIT, 0); + ktz->led_on = false; + } + + /* Set brightness */ + ktz8866_write(ktz, BL_BRT_LSB, brightness & 0x7); + ktz8866_write(ktz, BL_BRT_MSB, (brightness >> 3) & 0xFF); + + return 0; +} + +static const struct backlight_ops ktz8866_backlight_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = ktz8866_backlight_update_status, +}; + +static void ktz8866_init(struct ktz8866 *ktz) +{ + unsigned int val = 0; + + if (of_property_read_u32(ktz->client->dev.of_node, "current-num-sinks", &val)) + ktz8866_write(ktz, BL_EN, BIT(val) - 1); + else + /* Enable all 6 current sinks if the number of current sinks isn't specified. */ + ktz8866_write(ktz, BL_EN, BIT(6) - 1); + + if (of_property_read_u32(ktz->client->dev.of_node, "kinetic,current-ramp-delay-ms", &val)) { + if (val <= 128) + ktz8866_write(ktz, BL_CFG2, BIT(7) | (ilog2(val) << 3) | PWM_HYST); + else + ktz8866_write(ktz, BL_CFG2, BIT(7) | ((5 + val / 64) << 3) | PWM_HYST); + } + + if (of_property_read_u32(ktz->client->dev.of_node, "kinetic,led-enable-ramp-delay-ms", &val)) { + if (val == 0) + ktz8866_write(ktz, BL_DIMMING, 0); + else { + unsigned int ramp_off_time = ilog2(val) + 1; + unsigned int ramp_on_time = ramp_off_time << 4; + ktz8866_write(ktz, BL_DIMMING, ramp_on_time | ramp_off_time); + } + } + + if (of_property_read_bool(ktz->client->dev.of_node, "kinetic,enable-lcd-bias")) + ktz8866_write(ktz, LCD_BIAS_CFG1, LCD_BIAS_EN); +} + +static int ktz8866_probe(struct i2c_client *client) +{ + struct backlight_device *backlight_dev; + struct backlight_properties props; + struct ktz8866 *ktz; + int ret = 0; + + ktz = devm_kzalloc(&client->dev, sizeof(*ktz), GFP_KERNEL); + if (!ktz) + return -ENOMEM; + + ktz->client = client; + ktz->regmap = devm_regmap_init_i2c(client, &ktz8866_regmap_config); + if (IS_ERR(ktz->regmap)) + return dev_err_probe(&client->dev, PTR_ERR(ktz->regmap), "failed to init regmap\n"); + + ret = devm_regulator_get_enable(&client->dev, "vddpos"); + if (ret) + return dev_err_probe(&client->dev, ret, "get regulator vddpos failed\n"); + ret = devm_regulator_get_enable(&client->dev, "vddneg"); + if (ret) + return dev_err_probe(&client->dev, ret, "get regulator vddneg failed\n"); + + ktz->enable_gpio = devm_gpiod_get_optional(&client->dev, "enable", GPIOD_OUT_HIGH); + if (IS_ERR(ktz->enable_gpio)) + return PTR_ERR(ktz->enable_gpio); + + memset(&props, 0, sizeof(props)); + props.type = BACKLIGHT_RAW; + props.max_brightness = MAX_BRIGHTNESS; + props.brightness = DEFAULT_BRIGHTNESS; + props.scale = BACKLIGHT_SCALE_LINEAR; + + backlight_dev = devm_backlight_device_register(&client->dev, "ktz8866-backlight", + &client->dev, ktz, &ktz8866_backlight_ops, &props); + if (IS_ERR(backlight_dev)) + return dev_err_probe(&client->dev, PTR_ERR(backlight_dev), + "failed to register backlight device\n"); + + ktz8866_init(ktz); + + i2c_set_clientdata(client, backlight_dev); + backlight_update_status(backlight_dev); + + return 0; +} + +static void ktz8866_remove(struct i2c_client *client) +{ + struct backlight_device *backlight_dev = i2c_get_clientdata(client); + backlight_dev->props.brightness = 0; + backlight_update_status(backlight_dev); +} + +static const struct i2c_device_id ktz8866_ids[] = { + { "ktz8866", 0 }, + {}, +}; +MODULE_DEVICE_TABLE(i2c, ktz8866_ids); + +static const struct of_device_id ktz8866_match_table[] = { + { + .compatible = "kinetic,ktz8866", + }, + {}, +}; + +static struct i2c_driver ktz8866_driver = { + .driver = { + .name = "ktz8866", + .of_match_table = ktz8866_match_table, + }, + .probe = ktz8866_probe, + .remove = ktz8866_remove, + .id_table = ktz8866_ids, +}; + +module_i2c_driver(ktz8866_driver); + +MODULE_DESCRIPTION("Kinetic KTZ8866 Backlight Driver"); +MODULE_AUTHOR("Jianhua Lu <lujianhua000@gmail.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/backlight/l4f00242t03.c b/drivers/video/backlight/l4f00242t03.c new file mode 100644 index 0000000000..cc763cf15f --- /dev/null +++ b/drivers/video/backlight/l4f00242t03.c @@ -0,0 +1,255 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * l4f00242t03.c -- support for Epson L4F00242T03 LCD + * + * Copyright 2007-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * + * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com> + * Inspired by Marek Vasut work in l4f00242t03.c + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/gpio/consumer.h> +#include <linux/lcd.h> +#include <linux/slab.h> +#include <linux/regulator/consumer.h> +#include <linux/spi/spi.h> + +struct l4f00242t03_priv { + struct spi_device *spi; + struct lcd_device *ld; + int lcd_state; + struct regulator *io_reg; + struct regulator *core_reg; + struct gpio_desc *reset; + struct gpio_desc *enable; +}; + +static void l4f00242t03_reset(struct gpio_desc *gpiod) +{ + pr_debug("l4f00242t03_reset.\n"); + gpiod_set_value(gpiod, 1); + mdelay(100); + gpiod_set_value(gpiod, 0); + mdelay(10); /* tRES >= 100us */ + gpiod_set_value(gpiod, 1); + mdelay(20); +} + +#define param(x) ((x) | 0x100) + +static void l4f00242t03_lcd_init(struct spi_device *spi) +{ + struct l4f00242t03_priv *priv = spi_get_drvdata(spi); + const u16 cmd[] = { 0x36, param(0), 0x3A, param(0x60) }; + int ret; + + dev_dbg(&spi->dev, "initializing LCD\n"); + + ret = regulator_set_voltage(priv->io_reg, 1800000, 1800000); + if (ret) { + dev_err(&spi->dev, "failed to set the IO regulator voltage.\n"); + return; + } + ret = regulator_enable(priv->io_reg); + if (ret) { + dev_err(&spi->dev, "failed to enable the IO regulator.\n"); + return; + } + + ret = regulator_set_voltage(priv->core_reg, 2800000, 2800000); + if (ret) { + dev_err(&spi->dev, "failed to set the core regulator voltage.\n"); + regulator_disable(priv->io_reg); + return; + } + ret = regulator_enable(priv->core_reg); + if (ret) { + dev_err(&spi->dev, "failed to enable the core regulator.\n"); + regulator_disable(priv->io_reg); + return; + } + + l4f00242t03_reset(priv->reset); + + gpiod_set_value(priv->enable, 1); + msleep(60); + spi_write(spi, (const u8 *)cmd, ARRAY_SIZE(cmd) * sizeof(u16)); +} + +static void l4f00242t03_lcd_powerdown(struct spi_device *spi) +{ + struct l4f00242t03_priv *priv = spi_get_drvdata(spi); + + dev_dbg(&spi->dev, "Powering down LCD\n"); + + gpiod_set_value(priv->enable, 0); + + regulator_disable(priv->io_reg); + regulator_disable(priv->core_reg); +} + +static int l4f00242t03_lcd_power_get(struct lcd_device *ld) +{ + struct l4f00242t03_priv *priv = lcd_get_data(ld); + + return priv->lcd_state; +} + +static int l4f00242t03_lcd_power_set(struct lcd_device *ld, int power) +{ + struct l4f00242t03_priv *priv = lcd_get_data(ld); + struct spi_device *spi = priv->spi; + + const u16 slpout = 0x11; + const u16 dison = 0x29; + + const u16 slpin = 0x10; + const u16 disoff = 0x28; + + if (power <= FB_BLANK_NORMAL) { + if (priv->lcd_state <= FB_BLANK_NORMAL) { + /* Do nothing, the LCD is running */ + } else if (priv->lcd_state < FB_BLANK_POWERDOWN) { + dev_dbg(&spi->dev, "Resuming LCD\n"); + + spi_write(spi, (const u8 *)&slpout, sizeof(u16)); + msleep(60); + spi_write(spi, (const u8 *)&dison, sizeof(u16)); + } else { + /* priv->lcd_state == FB_BLANK_POWERDOWN */ + l4f00242t03_lcd_init(spi); + priv->lcd_state = FB_BLANK_VSYNC_SUSPEND; + l4f00242t03_lcd_power_set(priv->ld, power); + } + } else if (power < FB_BLANK_POWERDOWN) { + if (priv->lcd_state <= FB_BLANK_NORMAL) { + /* Send the display in standby */ + dev_dbg(&spi->dev, "Standby the LCD\n"); + + spi_write(spi, (const u8 *)&disoff, sizeof(u16)); + msleep(60); + spi_write(spi, (const u8 *)&slpin, sizeof(u16)); + } else if (priv->lcd_state < FB_BLANK_POWERDOWN) { + /* Do nothing, the LCD is already in standby */ + } else { + /* priv->lcd_state == FB_BLANK_POWERDOWN */ + l4f00242t03_lcd_init(spi); + priv->lcd_state = FB_BLANK_UNBLANK; + l4f00242t03_lcd_power_set(ld, power); + } + } else { + /* power == FB_BLANK_POWERDOWN */ + if (priv->lcd_state != FB_BLANK_POWERDOWN) { + /* Clear the screen before shutting down */ + spi_write(spi, (const u8 *)&disoff, sizeof(u16)); + msleep(60); + l4f00242t03_lcd_powerdown(spi); + } + } + + priv->lcd_state = power; + + return 0; +} + +static struct lcd_ops l4f_ops = { + .set_power = l4f00242t03_lcd_power_set, + .get_power = l4f00242t03_lcd_power_get, +}; + +static int l4f00242t03_probe(struct spi_device *spi) +{ + struct l4f00242t03_priv *priv; + + priv = devm_kzalloc(&spi->dev, sizeof(struct l4f00242t03_priv), + GFP_KERNEL); + if (priv == NULL) + return -ENOMEM; + + spi_set_drvdata(spi, priv); + spi->bits_per_word = 9; + spi_setup(spi); + + priv->spi = spi; + + priv->reset = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(priv->reset)) { + dev_err(&spi->dev, + "Unable to get the lcd l4f00242t03 reset gpio.\n"); + return PTR_ERR(priv->reset); + } + gpiod_set_consumer_name(priv->reset, "lcd l4f00242t03 reset"); + + priv->enable = devm_gpiod_get(&spi->dev, "enable", GPIOD_OUT_LOW); + if (IS_ERR(priv->enable)) { + dev_err(&spi->dev, + "Unable to get the lcd l4f00242t03 data en gpio.\n"); + return PTR_ERR(priv->enable); + } + gpiod_set_consumer_name(priv->enable, "lcd l4f00242t03 data enable"); + + priv->io_reg = devm_regulator_get(&spi->dev, "vdd"); + if (IS_ERR(priv->io_reg)) { + dev_err(&spi->dev, "%s: Unable to get the IO regulator\n", + __func__); + return PTR_ERR(priv->io_reg); + } + + priv->core_reg = devm_regulator_get(&spi->dev, "vcore"); + if (IS_ERR(priv->core_reg)) { + dev_err(&spi->dev, "%s: Unable to get the core regulator\n", + __func__); + return PTR_ERR(priv->core_reg); + } + + priv->ld = devm_lcd_device_register(&spi->dev, "l4f00242t03", &spi->dev, + priv, &l4f_ops); + if (IS_ERR(priv->ld)) + return PTR_ERR(priv->ld); + + /* Init the LCD */ + l4f00242t03_lcd_init(spi); + priv->lcd_state = FB_BLANK_VSYNC_SUSPEND; + l4f00242t03_lcd_power_set(priv->ld, FB_BLANK_UNBLANK); + + dev_info(&spi->dev, "Epson l4f00242t03 lcd probed.\n"); + + return 0; +} + +static void l4f00242t03_remove(struct spi_device *spi) +{ + struct l4f00242t03_priv *priv = spi_get_drvdata(spi); + + l4f00242t03_lcd_power_set(priv->ld, FB_BLANK_POWERDOWN); +} + +static void l4f00242t03_shutdown(struct spi_device *spi) +{ + struct l4f00242t03_priv *priv = spi_get_drvdata(spi); + + if (priv) + l4f00242t03_lcd_power_set(priv->ld, FB_BLANK_POWERDOWN); + +} + +static struct spi_driver l4f00242t03_driver = { + .driver = { + .name = "l4f00242t03", + }, + .probe = l4f00242t03_probe, + .remove = l4f00242t03_remove, + .shutdown = l4f00242t03_shutdown, +}; + +module_spi_driver(l4f00242t03_driver); + +MODULE_AUTHOR("Alberto Panizzo <maramaopercheseimorto@gmail.com>"); +MODULE_DESCRIPTION("EPSON L4F00242T03 LCD"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/video/backlight/lcd.c b/drivers/video/backlight/lcd.c new file mode 100644 index 0000000000..77c5cb2a44 --- /dev/null +++ b/drivers/video/backlight/lcd.c @@ -0,0 +1,346 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * LCD Lowlevel Control Abstraction + * + * Copyright (C) 2003,2004 Hewlett-Packard Company + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/lcd.h> +#include <linux/notifier.h> +#include <linux/ctype.h> +#include <linux/err.h> +#include <linux/fb.h> +#include <linux/slab.h> + +#if defined(CONFIG_FB) || (defined(CONFIG_FB_MODULE) && \ + defined(CONFIG_LCD_CLASS_DEVICE_MODULE)) +/* This callback gets called when something important happens inside a + * framebuffer driver. We're looking if that important event is blanking, + * and if it is, we're switching lcd power as well ... + */ +static int fb_notifier_callback(struct notifier_block *self, + unsigned long event, void *data) +{ + struct lcd_device *ld; + struct fb_event *evdata = data; + + ld = container_of(self, struct lcd_device, fb_notif); + if (!ld->ops) + return 0; + + mutex_lock(&ld->ops_lock); + if (!ld->ops->check_fb || ld->ops->check_fb(ld, evdata->info)) { + if (event == FB_EVENT_BLANK) { + if (ld->ops->set_power) + ld->ops->set_power(ld, *(int *)evdata->data); + } else { + if (ld->ops->set_mode) + ld->ops->set_mode(ld, evdata->data); + } + } + mutex_unlock(&ld->ops_lock); + return 0; +} + +static int lcd_register_fb(struct lcd_device *ld) +{ + memset(&ld->fb_notif, 0, sizeof(ld->fb_notif)); + ld->fb_notif.notifier_call = fb_notifier_callback; + return fb_register_client(&ld->fb_notif); +} + +static void lcd_unregister_fb(struct lcd_device *ld) +{ + fb_unregister_client(&ld->fb_notif); +} +#else +static int lcd_register_fb(struct lcd_device *ld) +{ + return 0; +} + +static inline void lcd_unregister_fb(struct lcd_device *ld) +{ +} +#endif /* CONFIG_FB */ + +static ssize_t lcd_power_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int rc; + struct lcd_device *ld = to_lcd_device(dev); + + mutex_lock(&ld->ops_lock); + if (ld->ops && ld->ops->get_power) + rc = sprintf(buf, "%d\n", ld->ops->get_power(ld)); + else + rc = -ENXIO; + mutex_unlock(&ld->ops_lock); + + return rc; +} + +static ssize_t lcd_power_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + int rc; + struct lcd_device *ld = to_lcd_device(dev); + unsigned long power; + + rc = kstrtoul(buf, 0, &power); + if (rc) + return rc; + + rc = -ENXIO; + + mutex_lock(&ld->ops_lock); + if (ld->ops && ld->ops->set_power) { + pr_debug("set power to %lu\n", power); + ld->ops->set_power(ld, power); + rc = count; + } + mutex_unlock(&ld->ops_lock); + + return rc; +} +static DEVICE_ATTR_RW(lcd_power); + +static ssize_t contrast_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int rc = -ENXIO; + struct lcd_device *ld = to_lcd_device(dev); + + mutex_lock(&ld->ops_lock); + if (ld->ops && ld->ops->get_contrast) + rc = sprintf(buf, "%d\n", ld->ops->get_contrast(ld)); + mutex_unlock(&ld->ops_lock); + + return rc; +} + +static ssize_t contrast_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + int rc; + struct lcd_device *ld = to_lcd_device(dev); + unsigned long contrast; + + rc = kstrtoul(buf, 0, &contrast); + if (rc) + return rc; + + rc = -ENXIO; + + mutex_lock(&ld->ops_lock); + if (ld->ops && ld->ops->set_contrast) { + pr_debug("set contrast to %lu\n", contrast); + ld->ops->set_contrast(ld, contrast); + rc = count; + } + mutex_unlock(&ld->ops_lock); + + return rc; +} +static DEVICE_ATTR_RW(contrast); + +static ssize_t max_contrast_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct lcd_device *ld = to_lcd_device(dev); + + return sprintf(buf, "%d\n", ld->props.max_contrast); +} +static DEVICE_ATTR_RO(max_contrast); + +static struct class *lcd_class; + +static void lcd_device_release(struct device *dev) +{ + struct lcd_device *ld = to_lcd_device(dev); + kfree(ld); +} + +static struct attribute *lcd_device_attrs[] = { + &dev_attr_lcd_power.attr, + &dev_attr_contrast.attr, + &dev_attr_max_contrast.attr, + NULL, +}; +ATTRIBUTE_GROUPS(lcd_device); + +/** + * lcd_device_register - register a new object of lcd_device class. + * @name: the name of the new object(must be the same as the name of the + * respective framebuffer device). + * @parent: pointer to the parent's struct device . + * @devdata: an optional pointer to be stored in the device. The + * methods may retrieve it by using lcd_get_data(ld). + * @ops: the lcd operations structure. + * + * Creates and registers a new lcd device. Returns either an ERR_PTR() + * or a pointer to the newly allocated device. + */ +struct lcd_device *lcd_device_register(const char *name, struct device *parent, + void *devdata, struct lcd_ops *ops) +{ + struct lcd_device *new_ld; + int rc; + + pr_debug("lcd_device_register: name=%s\n", name); + + new_ld = kzalloc(sizeof(struct lcd_device), GFP_KERNEL); + if (!new_ld) + return ERR_PTR(-ENOMEM); + + mutex_init(&new_ld->ops_lock); + mutex_init(&new_ld->update_lock); + + new_ld->dev.class = lcd_class; + new_ld->dev.parent = parent; + new_ld->dev.release = lcd_device_release; + dev_set_name(&new_ld->dev, "%s", name); + dev_set_drvdata(&new_ld->dev, devdata); + + new_ld->ops = ops; + + rc = device_register(&new_ld->dev); + if (rc) { + put_device(&new_ld->dev); + return ERR_PTR(rc); + } + + rc = lcd_register_fb(new_ld); + if (rc) { + device_unregister(&new_ld->dev); + return ERR_PTR(rc); + } + + return new_ld; +} +EXPORT_SYMBOL(lcd_device_register); + +/** + * lcd_device_unregister - unregisters a object of lcd_device class. + * @ld: the lcd device object to be unregistered and freed. + * + * Unregisters a previously registered via lcd_device_register object. + */ +void lcd_device_unregister(struct lcd_device *ld) +{ + if (!ld) + return; + + mutex_lock(&ld->ops_lock); + ld->ops = NULL; + mutex_unlock(&ld->ops_lock); + lcd_unregister_fb(ld); + + device_unregister(&ld->dev); +} +EXPORT_SYMBOL(lcd_device_unregister); + +static void devm_lcd_device_release(struct device *dev, void *res) +{ + struct lcd_device *lcd = *(struct lcd_device **)res; + + lcd_device_unregister(lcd); +} + +static int devm_lcd_device_match(struct device *dev, void *res, void *data) +{ + struct lcd_device **r = res; + + return *r == data; +} + +/** + * devm_lcd_device_register - resource managed lcd_device_register() + * @dev: the device to register + * @name: the name of the device + * @parent: a pointer to the parent device + * @devdata: an optional pointer to be stored for private driver use + * @ops: the lcd operations structure + * + * @return a struct lcd on success, or an ERR_PTR on error + * + * Managed lcd_device_register(). The lcd_device returned from this function + * are automatically freed on driver detach. See lcd_device_register() + * for more information. + */ +struct lcd_device *devm_lcd_device_register(struct device *dev, + const char *name, struct device *parent, + void *devdata, struct lcd_ops *ops) +{ + struct lcd_device **ptr, *lcd; + + ptr = devres_alloc(devm_lcd_device_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + lcd = lcd_device_register(name, parent, devdata, ops); + if (!IS_ERR(lcd)) { + *ptr = lcd; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return lcd; +} +EXPORT_SYMBOL(devm_lcd_device_register); + +/** + * devm_lcd_device_unregister - resource managed lcd_device_unregister() + * @dev: the device to unregister + * @ld: the lcd device to unregister + * + * Deallocated a lcd allocated with devm_lcd_device_register(). Normally + * this function will not need to be called and the resource management + * code will ensure that the resource is freed. + */ +void devm_lcd_device_unregister(struct device *dev, struct lcd_device *ld) +{ + int rc; + + rc = devres_release(dev, devm_lcd_device_release, + devm_lcd_device_match, ld); + WARN_ON(rc); +} +EXPORT_SYMBOL(devm_lcd_device_unregister); + + +static void __exit lcd_class_exit(void) +{ + class_destroy(lcd_class); +} + +static int __init lcd_class_init(void) +{ + lcd_class = class_create("lcd"); + if (IS_ERR(lcd_class)) { + pr_warn("Unable to create backlight class; errno = %ld\n", + PTR_ERR(lcd_class)); + return PTR_ERR(lcd_class); + } + + lcd_class->dev_groups = lcd_device_groups; + return 0; +} + +/* + * if this is compiled into the kernel, we need to ensure that the + * class is registered before users of the class try to register lcd's + */ +postcore_initcall(lcd_class_init); +module_exit(lcd_class_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jamey Hicks <jamey.hicks@hp.com>, Andrew Zabolotny <zap@homelink.ru>"); +MODULE_DESCRIPTION("LCD Lowlevel Control Abstraction"); diff --git a/drivers/video/backlight/led_bl.c b/drivers/video/backlight/led_bl.c new file mode 100644 index 0000000000..032f8bddf8 --- /dev/null +++ b/drivers/video/backlight/led_bl.c @@ -0,0 +1,256 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2015-2019 Texas Instruments Incorporated - http://www.ti.com/ + * Author: Tomi Valkeinen <tomi.valkeinen@ti.com> + * + * Based on pwm_bl.c + */ + +#include <linux/backlight.h> +#include <linux/leds.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +struct led_bl_data { + struct device *dev; + struct backlight_device *bl_dev; + struct led_classdev **leds; + bool enabled; + int nb_leds; + unsigned int *levels; + unsigned int default_brightness; + unsigned int max_brightness; +}; + +static void led_bl_set_brightness(struct led_bl_data *priv, int level) +{ + int i; + int bkl_brightness; + + if (priv->levels) + bkl_brightness = priv->levels[level]; + else + bkl_brightness = level; + + for (i = 0; i < priv->nb_leds; i++) + led_set_brightness(priv->leds[i], bkl_brightness); + + priv->enabled = true; +} + +static void led_bl_power_off(struct led_bl_data *priv) +{ + int i; + + if (!priv->enabled) + return; + + for (i = 0; i < priv->nb_leds; i++) + led_set_brightness(priv->leds[i], LED_OFF); + + priv->enabled = false; +} + +static int led_bl_update_status(struct backlight_device *bl) +{ + struct led_bl_data *priv = bl_get_data(bl); + int brightness = backlight_get_brightness(bl); + + if (brightness > 0) + led_bl_set_brightness(priv, brightness); + else + led_bl_power_off(priv); + + return 0; +} + +static const struct backlight_ops led_bl_ops = { + .update_status = led_bl_update_status, +}; + +static int led_bl_get_leds(struct device *dev, + struct led_bl_data *priv) +{ + int i, nb_leds, ret; + struct device_node *node = dev->of_node; + struct led_classdev **leds; + unsigned int max_brightness; + unsigned int default_brightness; + + ret = of_count_phandle_with_args(node, "leds", NULL); + if (ret < 0) { + dev_err(dev, "Unable to get led count\n"); + return -EINVAL; + } + + nb_leds = ret; + if (nb_leds < 1) { + dev_err(dev, "At least one LED must be specified!\n"); + return -EINVAL; + } + + leds = devm_kzalloc(dev, sizeof(struct led_classdev *) * nb_leds, + GFP_KERNEL); + if (!leds) + return -ENOMEM; + + for (i = 0; i < nb_leds; i++) { + leds[i] = devm_of_led_get(dev, i); + if (IS_ERR(leds[i])) + return PTR_ERR(leds[i]); + } + + /* check that the LEDs all have the same brightness range */ + max_brightness = leds[0]->max_brightness; + for (i = 1; i < nb_leds; i++) { + if (max_brightness != leds[i]->max_brightness) { + dev_err(dev, "LEDs must have identical ranges\n"); + return -EINVAL; + } + } + + /* get the default brightness from the first LED from the list */ + default_brightness = leds[0]->brightness; + + priv->nb_leds = nb_leds; + priv->leds = leds; + priv->max_brightness = max_brightness; + priv->default_brightness = default_brightness; + + return 0; +} + +static int led_bl_parse_levels(struct device *dev, + struct led_bl_data *priv) +{ + struct device_node *node = dev->of_node; + int num_levels; + u32 value; + int ret; + + if (!node) + return -ENODEV; + + num_levels = of_property_count_u32_elems(node, "brightness-levels"); + if (num_levels > 1) { + int i; + unsigned int db; + u32 *levels = NULL; + + levels = devm_kzalloc(dev, sizeof(u32) * num_levels, + GFP_KERNEL); + if (!levels) + return -ENOMEM; + + ret = of_property_read_u32_array(node, "brightness-levels", + levels, + num_levels); + if (ret < 0) + return ret; + + /* + * Try to map actual LED brightness to backlight brightness + * level + */ + db = priv->default_brightness; + for (i = 0 ; i < num_levels; i++) { + if ((i && db > levels[i-1]) && db <= levels[i]) + break; + } + priv->default_brightness = i; + priv->max_brightness = num_levels - 1; + priv->levels = levels; + } else if (num_levels >= 0) + dev_warn(dev, "Not enough levels defined\n"); + + ret = of_property_read_u32(node, "default-brightness-level", &value); + if (!ret && value <= priv->max_brightness) + priv->default_brightness = value; + else if (!ret && value > priv->max_brightness) + dev_warn(dev, "Invalid default brightness. Ignoring it\n"); + + return 0; +} + +static int led_bl_probe(struct platform_device *pdev) +{ + struct backlight_properties props; + struct led_bl_data *priv; + int ret, i; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + platform_set_drvdata(pdev, priv); + + priv->dev = &pdev->dev; + + ret = led_bl_get_leds(&pdev->dev, priv); + if (ret) + return ret; + + ret = led_bl_parse_levels(&pdev->dev, priv); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to parse DT data\n"); + return ret; + } + + memset(&props, 0, sizeof(struct backlight_properties)); + props.type = BACKLIGHT_RAW; + props.max_brightness = priv->max_brightness; + props.brightness = priv->default_brightness; + props.power = (priv->default_brightness > 0) ? FB_BLANK_POWERDOWN : + FB_BLANK_UNBLANK; + priv->bl_dev = backlight_device_register(dev_name(&pdev->dev), + &pdev->dev, priv, &led_bl_ops, &props); + if (IS_ERR(priv->bl_dev)) { + dev_err(&pdev->dev, "Failed to register backlight\n"); + return PTR_ERR(priv->bl_dev); + } + + for (i = 0; i < priv->nb_leds; i++) { + mutex_lock(&priv->leds[i]->led_access); + led_sysfs_disable(priv->leds[i]); + mutex_unlock(&priv->leds[i]->led_access); + } + + backlight_update_status(priv->bl_dev); + + return 0; +} + +static void led_bl_remove(struct platform_device *pdev) +{ + struct led_bl_data *priv = platform_get_drvdata(pdev); + struct backlight_device *bl = priv->bl_dev; + int i; + + backlight_device_unregister(bl); + + led_bl_power_off(priv); + for (i = 0; i < priv->nb_leds; i++) + led_sysfs_enable(priv->leds[i]); +} + +static const struct of_device_id led_bl_of_match[] = { + { .compatible = "led-backlight" }, + { } +}; + +MODULE_DEVICE_TABLE(of, led_bl_of_match); + +static struct platform_driver led_bl_driver = { + .driver = { + .name = "led-backlight", + .of_match_table = led_bl_of_match, + }, + .probe = led_bl_probe, + .remove_new = led_bl_remove, +}; + +module_platform_driver(led_bl_driver); + +MODULE_DESCRIPTION("LED based Backlight Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:led-backlight"); diff --git a/drivers/video/backlight/lm3533_bl.c b/drivers/video/backlight/lm3533_bl.c new file mode 100644 index 0000000000..3e10d480cb --- /dev/null +++ b/drivers/video/backlight/lm3533_bl.c @@ -0,0 +1,399 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * lm3533-bl.c -- LM3533 Backlight driver + * + * Copyright (C) 2011-2012 Texas Instruments + * + * Author: Johan Hovold <jhovold@gmail.com> + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/backlight.h> +#include <linux/fb.h> +#include <linux/slab.h> + +#include <linux/mfd/lm3533.h> + + +#define LM3533_HVCTRLBANK_COUNT 2 +#define LM3533_BL_MAX_BRIGHTNESS 255 + +#define LM3533_REG_CTRLBANK_AB_BCONF 0x1a + + +struct lm3533_bl { + struct lm3533 *lm3533; + struct lm3533_ctrlbank cb; + struct backlight_device *bd; + int id; +}; + + +static inline int lm3533_bl_get_ctrlbank_id(struct lm3533_bl *bl) +{ + return bl->id; +} + +static int lm3533_bl_update_status(struct backlight_device *bd) +{ + struct lm3533_bl *bl = bl_get_data(bd); + + return lm3533_ctrlbank_set_brightness(&bl->cb, backlight_get_brightness(bd)); +} + +static int lm3533_bl_get_brightness(struct backlight_device *bd) +{ + struct lm3533_bl *bl = bl_get_data(bd); + u8 val; + int ret; + + ret = lm3533_ctrlbank_get_brightness(&bl->cb, &val); + if (ret) + return ret; + + return val; +} + +static const struct backlight_ops lm3533_bl_ops = { + .get_brightness = lm3533_bl_get_brightness, + .update_status = lm3533_bl_update_status, +}; + +static ssize_t show_id(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct lm3533_bl *bl = dev_get_drvdata(dev); + + return scnprintf(buf, PAGE_SIZE, "%d\n", bl->id); +} + +static ssize_t show_als_channel(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct lm3533_bl *bl = dev_get_drvdata(dev); + unsigned channel = lm3533_bl_get_ctrlbank_id(bl); + + return scnprintf(buf, PAGE_SIZE, "%u\n", channel); +} + +static ssize_t show_als_en(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct lm3533_bl *bl = dev_get_drvdata(dev); + int ctrlbank = lm3533_bl_get_ctrlbank_id(bl); + u8 val; + u8 mask; + bool enable; + int ret; + + ret = lm3533_read(bl->lm3533, LM3533_REG_CTRLBANK_AB_BCONF, &val); + if (ret) + return ret; + + mask = 1 << (2 * ctrlbank); + enable = val & mask; + + return scnprintf(buf, PAGE_SIZE, "%d\n", enable); +} + +static ssize_t store_als_en(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct lm3533_bl *bl = dev_get_drvdata(dev); + int ctrlbank = lm3533_bl_get_ctrlbank_id(bl); + int enable; + u8 val; + u8 mask; + int ret; + + if (kstrtoint(buf, 0, &enable)) + return -EINVAL; + + mask = 1 << (2 * ctrlbank); + + if (enable) + val = mask; + else + val = 0; + + ret = lm3533_update(bl->lm3533, LM3533_REG_CTRLBANK_AB_BCONF, val, + mask); + if (ret) + return ret; + + return len; +} + +static ssize_t show_linear(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct lm3533_bl *bl = dev_get_drvdata(dev); + u8 val; + u8 mask; + int linear; + int ret; + + ret = lm3533_read(bl->lm3533, LM3533_REG_CTRLBANK_AB_BCONF, &val); + if (ret) + return ret; + + mask = 1 << (2 * lm3533_bl_get_ctrlbank_id(bl) + 1); + + if (val & mask) + linear = 1; + else + linear = 0; + + return scnprintf(buf, PAGE_SIZE, "%x\n", linear); +} + +static ssize_t store_linear(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct lm3533_bl *bl = dev_get_drvdata(dev); + unsigned long linear; + u8 mask; + u8 val; + int ret; + + if (kstrtoul(buf, 0, &linear)) + return -EINVAL; + + mask = 1 << (2 * lm3533_bl_get_ctrlbank_id(bl) + 1); + + if (linear) + val = mask; + else + val = 0; + + ret = lm3533_update(bl->lm3533, LM3533_REG_CTRLBANK_AB_BCONF, val, + mask); + if (ret) + return ret; + + return len; +} + +static ssize_t show_pwm(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct lm3533_bl *bl = dev_get_drvdata(dev); + u8 val; + int ret; + + ret = lm3533_ctrlbank_get_pwm(&bl->cb, &val); + if (ret) + return ret; + + return scnprintf(buf, PAGE_SIZE, "%u\n", val); +} + +static ssize_t store_pwm(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct lm3533_bl *bl = dev_get_drvdata(dev); + u8 val; + int ret; + + if (kstrtou8(buf, 0, &val)) + return -EINVAL; + + ret = lm3533_ctrlbank_set_pwm(&bl->cb, val); + if (ret) + return ret; + + return len; +} + +static LM3533_ATTR_RO(als_channel); +static LM3533_ATTR_RW(als_en); +static LM3533_ATTR_RO(id); +static LM3533_ATTR_RW(linear); +static LM3533_ATTR_RW(pwm); + +static struct attribute *lm3533_bl_attributes[] = { + &dev_attr_als_channel.attr, + &dev_attr_als_en.attr, + &dev_attr_id.attr, + &dev_attr_linear.attr, + &dev_attr_pwm.attr, + NULL, +}; + +static umode_t lm3533_bl_attr_is_visible(struct kobject *kobj, + struct attribute *attr, int n) +{ + struct device *dev = kobj_to_dev(kobj); + struct lm3533_bl *bl = dev_get_drvdata(dev); + umode_t mode = attr->mode; + + if (attr == &dev_attr_als_channel.attr || + attr == &dev_attr_als_en.attr) { + if (!bl->lm3533->have_als) + mode = 0; + } + + return mode; +}; + +static struct attribute_group lm3533_bl_attribute_group = { + .is_visible = lm3533_bl_attr_is_visible, + .attrs = lm3533_bl_attributes +}; + +static int lm3533_bl_setup(struct lm3533_bl *bl, + struct lm3533_bl_platform_data *pdata) +{ + int ret; + + ret = lm3533_ctrlbank_set_max_current(&bl->cb, pdata->max_current); + if (ret) + return ret; + + return lm3533_ctrlbank_set_pwm(&bl->cb, pdata->pwm); +} + +static int lm3533_bl_probe(struct platform_device *pdev) +{ + struct lm3533 *lm3533; + struct lm3533_bl_platform_data *pdata; + struct lm3533_bl *bl; + struct backlight_device *bd; + struct backlight_properties props; + int ret; + + dev_dbg(&pdev->dev, "%s\n", __func__); + + lm3533 = dev_get_drvdata(pdev->dev.parent); + if (!lm3533) + return -EINVAL; + + pdata = dev_get_platdata(&pdev->dev); + if (!pdata) { + dev_err(&pdev->dev, "no platform data\n"); + return -EINVAL; + } + + if (pdev->id < 0 || pdev->id >= LM3533_HVCTRLBANK_COUNT) { + dev_err(&pdev->dev, "illegal backlight id %d\n", pdev->id); + return -EINVAL; + } + + bl = devm_kzalloc(&pdev->dev, sizeof(*bl), GFP_KERNEL); + if (!bl) + return -ENOMEM; + + bl->lm3533 = lm3533; + bl->id = pdev->id; + + bl->cb.lm3533 = lm3533; + bl->cb.id = lm3533_bl_get_ctrlbank_id(bl); + bl->cb.dev = NULL; /* until registered */ + + memset(&props, 0, sizeof(props)); + props.type = BACKLIGHT_RAW; + props.max_brightness = LM3533_BL_MAX_BRIGHTNESS; + props.brightness = pdata->default_brightness; + bd = devm_backlight_device_register(&pdev->dev, pdata->name, + pdev->dev.parent, bl, &lm3533_bl_ops, + &props); + if (IS_ERR(bd)) { + dev_err(&pdev->dev, "failed to register backlight device\n"); + return PTR_ERR(bd); + } + + bl->bd = bd; + bl->cb.dev = &bl->bd->dev; + + platform_set_drvdata(pdev, bl); + + ret = sysfs_create_group(&bd->dev.kobj, &lm3533_bl_attribute_group); + if (ret < 0) { + dev_err(&pdev->dev, "failed to create sysfs attributes\n"); + return ret; + } + + backlight_update_status(bd); + + ret = lm3533_bl_setup(bl, pdata); + if (ret) + goto err_sysfs_remove; + + ret = lm3533_ctrlbank_enable(&bl->cb); + if (ret) + goto err_sysfs_remove; + + return 0; + +err_sysfs_remove: + sysfs_remove_group(&bd->dev.kobj, &lm3533_bl_attribute_group); + + return ret; +} + +static void lm3533_bl_remove(struct platform_device *pdev) +{ + struct lm3533_bl *bl = platform_get_drvdata(pdev); + struct backlight_device *bd = bl->bd; + + dev_dbg(&bd->dev, "%s\n", __func__); + + bd->props.power = FB_BLANK_POWERDOWN; + bd->props.brightness = 0; + + lm3533_ctrlbank_disable(&bl->cb); + sysfs_remove_group(&bd->dev.kobj, &lm3533_bl_attribute_group); +} + +#ifdef CONFIG_PM_SLEEP +static int lm3533_bl_suspend(struct device *dev) +{ + struct lm3533_bl *bl = dev_get_drvdata(dev); + + dev_dbg(dev, "%s\n", __func__); + + return lm3533_ctrlbank_disable(&bl->cb); +} + +static int lm3533_bl_resume(struct device *dev) +{ + struct lm3533_bl *bl = dev_get_drvdata(dev); + + dev_dbg(dev, "%s\n", __func__); + + return lm3533_ctrlbank_enable(&bl->cb); +} +#endif + +static SIMPLE_DEV_PM_OPS(lm3533_bl_pm_ops, lm3533_bl_suspend, lm3533_bl_resume); + +static void lm3533_bl_shutdown(struct platform_device *pdev) +{ + struct lm3533_bl *bl = platform_get_drvdata(pdev); + + dev_dbg(&pdev->dev, "%s\n", __func__); + + lm3533_ctrlbank_disable(&bl->cb); +} + +static struct platform_driver lm3533_bl_driver = { + .driver = { + .name = "lm3533-backlight", + .pm = &lm3533_bl_pm_ops, + }, + .probe = lm3533_bl_probe, + .remove_new = lm3533_bl_remove, + .shutdown = lm3533_bl_shutdown, +}; +module_platform_driver(lm3533_bl_driver); + +MODULE_AUTHOR("Johan Hovold <jhovold@gmail.com>"); +MODULE_DESCRIPTION("LM3533 Backlight driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:lm3533-backlight"); diff --git a/drivers/video/backlight/lm3630a_bl.c b/drivers/video/backlight/lm3630a_bl.c new file mode 100644 index 0000000000..8fcb62be59 --- /dev/null +++ b/drivers/video/backlight/lm3630a_bl.c @@ -0,0 +1,633 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* +* Simple driver for Texas Instruments LM3630A Backlight driver chip +* Copyright (C) 2012 Texas Instruments +*/ +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/backlight.h> +#include <linux/err.h> +#include <linux/delay.h> +#include <linux/uaccess.h> +#include <linux/interrupt.h> +#include <linux/regmap.h> +#include <linux/gpio/consumer.h> +#include <linux/pwm.h> +#include <linux/platform_data/lm3630a_bl.h> + +#define REG_CTRL 0x00 +#define REG_BOOST 0x02 +#define REG_CONFIG 0x01 +#define REG_BRT_A 0x03 +#define REG_BRT_B 0x04 +#define REG_I_A 0x05 +#define REG_I_B 0x06 +#define REG_INT_STATUS 0x09 +#define REG_INT_EN 0x0A +#define REG_FAULT 0x0B +#define REG_PWM_OUTLOW 0x12 +#define REG_PWM_OUTHIGH 0x13 +#define REG_FILTER_STRENGTH 0x50 +#define REG_MAX 0x50 + +#define INT_DEBOUNCE_MSEC 10 + +#define LM3630A_BANK_0 0 +#define LM3630A_BANK_1 1 + +#define LM3630A_NUM_SINKS 2 +#define LM3630A_SINK_0 0 +#define LM3630A_SINK_1 1 + +struct lm3630a_chip { + struct device *dev; + struct delayed_work work; + + int irq; + struct workqueue_struct *irqthread; + struct lm3630a_platform_data *pdata; + struct backlight_device *bleda; + struct backlight_device *bledb; + struct gpio_desc *enable_gpio; + struct regmap *regmap; + struct pwm_device *pwmd; + struct pwm_state pwmd_state; +}; + +/* i2c access */ +static int lm3630a_read(struct lm3630a_chip *pchip, unsigned int reg) +{ + int rval; + unsigned int reg_val; + + rval = regmap_read(pchip->regmap, reg, ®_val); + if (rval < 0) + return rval; + return reg_val & 0xFF; +} + +static int lm3630a_write(struct lm3630a_chip *pchip, + unsigned int reg, unsigned int data) +{ + return regmap_write(pchip->regmap, reg, data); +} + +static int lm3630a_update(struct lm3630a_chip *pchip, + unsigned int reg, unsigned int mask, + unsigned int data) +{ + return regmap_update_bits(pchip->regmap, reg, mask, data); +} + +/* initialize chip */ +static int lm3630a_chip_init(struct lm3630a_chip *pchip) +{ + int rval; + struct lm3630a_platform_data *pdata = pchip->pdata; + + usleep_range(1000, 2000); + /* set Filter Strength Register */ + rval = lm3630a_write(pchip, REG_FILTER_STRENGTH, 0x03); + /* set Cofig. register */ + rval |= lm3630a_update(pchip, REG_CONFIG, 0x07, pdata->pwm_ctrl); + /* set boost control */ + rval |= lm3630a_write(pchip, REG_BOOST, 0x38); + /* set current A */ + rval |= lm3630a_update(pchip, REG_I_A, 0x1F, 0x1F); + /* set current B */ + rval |= lm3630a_write(pchip, REG_I_B, 0x1F); + /* set control */ + rval |= lm3630a_update(pchip, REG_CTRL, 0x14, pdata->leda_ctrl); + rval |= lm3630a_update(pchip, REG_CTRL, 0x0B, pdata->ledb_ctrl); + usleep_range(1000, 2000); + /* set brightness A and B */ + rval |= lm3630a_write(pchip, REG_BRT_A, pdata->leda_init_brt); + rval |= lm3630a_write(pchip, REG_BRT_B, pdata->ledb_init_brt); + + if (rval < 0) + dev_err(pchip->dev, "i2c failed to access register\n"); + return rval; +} + +/* interrupt handling */ +static void lm3630a_delayed_func(struct work_struct *work) +{ + int rval; + struct lm3630a_chip *pchip; + + pchip = container_of(work, struct lm3630a_chip, work.work); + + rval = lm3630a_read(pchip, REG_INT_STATUS); + if (rval < 0) { + dev_err(pchip->dev, + "i2c failed to access REG_INT_STATUS Register\n"); + return; + } + + dev_info(pchip->dev, "REG_INT_STATUS Register is 0x%x\n", rval); +} + +static irqreturn_t lm3630a_isr_func(int irq, void *chip) +{ + int rval; + struct lm3630a_chip *pchip = chip; + unsigned long delay = msecs_to_jiffies(INT_DEBOUNCE_MSEC); + + queue_delayed_work(pchip->irqthread, &pchip->work, delay); + + rval = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00); + if (rval < 0) { + dev_err(pchip->dev, "i2c failed to access register\n"); + return IRQ_NONE; + } + return IRQ_HANDLED; +} + +static int lm3630a_intr_config(struct lm3630a_chip *pchip) +{ + int rval; + + rval = lm3630a_write(pchip, REG_INT_EN, 0x87); + if (rval < 0) + return rval; + + INIT_DELAYED_WORK(&pchip->work, lm3630a_delayed_func); + pchip->irqthread = create_singlethread_workqueue("lm3630a-irqthd"); + if (!pchip->irqthread) { + dev_err(pchip->dev, "create irq thread fail\n"); + return -ENOMEM; + } + if (request_threaded_irq + (pchip->irq, NULL, lm3630a_isr_func, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "lm3630a_irq", pchip)) { + dev_err(pchip->dev, "request threaded irq fail\n"); + destroy_workqueue(pchip->irqthread); + return -ENOMEM; + } + return rval; +} + +static int lm3630a_pwm_ctrl(struct lm3630a_chip *pchip, int br, int br_max) +{ + int err; + + pchip->pwmd_state.period = pchip->pdata->pwm_period; + + err = pwm_set_relative_duty_cycle(&pchip->pwmd_state, br, br_max); + if (err) + return err; + + pchip->pwmd_state.enabled = pchip->pwmd_state.duty_cycle ? true : false; + + return pwm_apply_state(pchip->pwmd, &pchip->pwmd_state); +} + +/* update and get brightness */ +static int lm3630a_bank_a_update_status(struct backlight_device *bl) +{ + int ret; + struct lm3630a_chip *pchip = bl_get_data(bl); + enum lm3630a_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl; + + /* pwm control */ + if ((pwm_ctrl & LM3630A_PWM_BANK_A) != 0) + return lm3630a_pwm_ctrl(pchip, bl->props.brightness, + bl->props.max_brightness); + + /* disable sleep */ + ret = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00); + if (ret < 0) + goto out_i2c_err; + usleep_range(1000, 2000); + /* minimum brightness is 0x04 */ + ret = lm3630a_write(pchip, REG_BRT_A, bl->props.brightness); + + if (backlight_is_blank(bl) || (backlight_get_brightness(bl) < 0x4)) + /* turn the string off */ + ret |= lm3630a_update(pchip, REG_CTRL, LM3630A_LEDA_ENABLE, 0); + else + ret |= lm3630a_update(pchip, REG_CTRL, + LM3630A_LEDA_ENABLE, LM3630A_LEDA_ENABLE); + if (ret < 0) + goto out_i2c_err; + return 0; + +out_i2c_err: + dev_err(pchip->dev, "i2c failed to access (%pe)\n", ERR_PTR(ret)); + return ret; +} + +static int lm3630a_bank_a_get_brightness(struct backlight_device *bl) +{ + int brightness, rval; + struct lm3630a_chip *pchip = bl_get_data(bl); + enum lm3630a_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl; + + if ((pwm_ctrl & LM3630A_PWM_BANK_A) != 0) { + rval = lm3630a_read(pchip, REG_PWM_OUTHIGH); + if (rval < 0) + goto out_i2c_err; + brightness = (rval & 0x01) << 8; + rval = lm3630a_read(pchip, REG_PWM_OUTLOW); + if (rval < 0) + goto out_i2c_err; + brightness |= rval; + goto out; + } + + /* disable sleep */ + rval = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00); + if (rval < 0) + goto out_i2c_err; + usleep_range(1000, 2000); + rval = lm3630a_read(pchip, REG_BRT_A); + if (rval < 0) + goto out_i2c_err; + brightness = rval; + +out: + bl->props.brightness = brightness; + return bl->props.brightness; +out_i2c_err: + dev_err(pchip->dev, "i2c failed to access register\n"); + return 0; +} + +static const struct backlight_ops lm3630a_bank_a_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = lm3630a_bank_a_update_status, + .get_brightness = lm3630a_bank_a_get_brightness, +}; + +/* update and get brightness */ +static int lm3630a_bank_b_update_status(struct backlight_device *bl) +{ + int ret; + struct lm3630a_chip *pchip = bl_get_data(bl); + enum lm3630a_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl; + + /* pwm control */ + if ((pwm_ctrl & LM3630A_PWM_BANK_B) != 0) + return lm3630a_pwm_ctrl(pchip, bl->props.brightness, + bl->props.max_brightness); + + /* disable sleep */ + ret = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00); + if (ret < 0) + goto out_i2c_err; + usleep_range(1000, 2000); + /* minimum brightness is 0x04 */ + ret = lm3630a_write(pchip, REG_BRT_B, bl->props.brightness); + + if (backlight_is_blank(bl) || (backlight_get_brightness(bl) < 0x4)) + /* turn the string off */ + ret |= lm3630a_update(pchip, REG_CTRL, LM3630A_LEDB_ENABLE, 0); + else + ret |= lm3630a_update(pchip, REG_CTRL, + LM3630A_LEDB_ENABLE, LM3630A_LEDB_ENABLE); + if (ret < 0) + goto out_i2c_err; + return 0; + +out_i2c_err: + dev_err(pchip->dev, "i2c failed to access (%pe)\n", ERR_PTR(ret)); + return ret; +} + +static int lm3630a_bank_b_get_brightness(struct backlight_device *bl) +{ + int brightness, rval; + struct lm3630a_chip *pchip = bl_get_data(bl); + enum lm3630a_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl; + + if ((pwm_ctrl & LM3630A_PWM_BANK_B) != 0) { + rval = lm3630a_read(pchip, REG_PWM_OUTHIGH); + if (rval < 0) + goto out_i2c_err; + brightness = (rval & 0x01) << 8; + rval = lm3630a_read(pchip, REG_PWM_OUTLOW); + if (rval < 0) + goto out_i2c_err; + brightness |= rval; + goto out; + } + + /* disable sleep */ + rval = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00); + if (rval < 0) + goto out_i2c_err; + usleep_range(1000, 2000); + rval = lm3630a_read(pchip, REG_BRT_B); + if (rval < 0) + goto out_i2c_err; + brightness = rval; + +out: + bl->props.brightness = brightness; + return bl->props.brightness; +out_i2c_err: + dev_err(pchip->dev, "i2c failed to access register\n"); + return 0; +} + +static const struct backlight_ops lm3630a_bank_b_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = lm3630a_bank_b_update_status, + .get_brightness = lm3630a_bank_b_get_brightness, +}; + +static int lm3630a_backlight_register(struct lm3630a_chip *pchip) +{ + struct lm3630a_platform_data *pdata = pchip->pdata; + struct backlight_properties props; + const char *label; + + props.type = BACKLIGHT_RAW; + if (pdata->leda_ctrl != LM3630A_LEDA_DISABLE) { + props.brightness = pdata->leda_init_brt; + props.max_brightness = pdata->leda_max_brt; + label = pdata->leda_label ? pdata->leda_label : "lm3630a_leda"; + pchip->bleda = + devm_backlight_device_register(pchip->dev, label, + pchip->dev, pchip, + &lm3630a_bank_a_ops, &props); + if (IS_ERR(pchip->bleda)) + return PTR_ERR(pchip->bleda); + } + + if ((pdata->ledb_ctrl != LM3630A_LEDB_DISABLE) && + (pdata->ledb_ctrl != LM3630A_LEDB_ON_A)) { + props.brightness = pdata->ledb_init_brt; + props.max_brightness = pdata->ledb_max_brt; + label = pdata->ledb_label ? pdata->ledb_label : "lm3630a_ledb"; + pchip->bledb = + devm_backlight_device_register(pchip->dev, label, + pchip->dev, pchip, + &lm3630a_bank_b_ops, &props); + if (IS_ERR(pchip->bledb)) + return PTR_ERR(pchip->bledb); + } + return 0; +} + +static const struct regmap_config lm3630a_regmap = { + .reg_bits = 8, + .val_bits = 8, + .max_register = REG_MAX, +}; + +static int lm3630a_parse_led_sources(struct fwnode_handle *node, + int default_led_sources) +{ + u32 sources[LM3630A_NUM_SINKS]; + int ret, num_sources, i; + + num_sources = fwnode_property_count_u32(node, "led-sources"); + if (num_sources < 0) + return default_led_sources; + else if (num_sources > ARRAY_SIZE(sources)) + return -EINVAL; + + ret = fwnode_property_read_u32_array(node, "led-sources", sources, + num_sources); + if (ret) + return ret; + + for (i = 0; i < num_sources; i++) { + if (sources[i] != LM3630A_SINK_0 && sources[i] != LM3630A_SINK_1) + return -EINVAL; + + ret |= BIT(sources[i]); + } + + return ret; +} + +static int lm3630a_parse_bank(struct lm3630a_platform_data *pdata, + struct fwnode_handle *node, int *seen_led_sources) +{ + int led_sources, ret; + const char *label; + u32 bank, val; + bool linear; + + ret = fwnode_property_read_u32(node, "reg", &bank); + if (ret) + return ret; + + if (bank != LM3630A_BANK_0 && bank != LM3630A_BANK_1) + return -EINVAL; + + led_sources = lm3630a_parse_led_sources(node, BIT(bank)); + if (led_sources < 0) + return led_sources; + + if (*seen_led_sources & led_sources) + return -EINVAL; + + *seen_led_sources |= led_sources; + + linear = fwnode_property_read_bool(node, + "ti,linear-mapping-mode"); + if (bank) { + if (led_sources & BIT(LM3630A_SINK_0) || + !(led_sources & BIT(LM3630A_SINK_1))) + return -EINVAL; + + pdata->ledb_ctrl = linear ? + LM3630A_LEDB_ENABLE_LINEAR : + LM3630A_LEDB_ENABLE; + } else { + if (!(led_sources & BIT(LM3630A_SINK_0))) + return -EINVAL; + + pdata->leda_ctrl = linear ? + LM3630A_LEDA_ENABLE_LINEAR : + LM3630A_LEDA_ENABLE; + + if (led_sources & BIT(LM3630A_SINK_1)) + pdata->ledb_ctrl = LM3630A_LEDB_ON_A; + } + + ret = fwnode_property_read_string(node, "label", &label); + if (!ret) { + if (bank) + pdata->ledb_label = label; + else + pdata->leda_label = label; + } + + ret = fwnode_property_read_u32(node, "default-brightness", + &val); + if (!ret) { + if (bank) + pdata->ledb_init_brt = val; + else + pdata->leda_init_brt = val; + } + + ret = fwnode_property_read_u32(node, "max-brightness", &val); + if (!ret) { + if (bank) + pdata->ledb_max_brt = val; + else + pdata->leda_max_brt = val; + } + + return 0; +} + +static int lm3630a_parse_node(struct lm3630a_chip *pchip, + struct lm3630a_platform_data *pdata) +{ + int ret = -ENODEV, seen_led_sources = 0; + struct fwnode_handle *node; + + device_for_each_child_node(pchip->dev, node) { + ret = lm3630a_parse_bank(pdata, node, &seen_led_sources); + if (ret) { + fwnode_handle_put(node); + return ret; + } + } + + return ret; +} + +static int lm3630a_probe(struct i2c_client *client) +{ + struct lm3630a_platform_data *pdata = dev_get_platdata(&client->dev); + struct lm3630a_chip *pchip; + int rval; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, "fail : i2c functionality check\n"); + return -EOPNOTSUPP; + } + + pchip = devm_kzalloc(&client->dev, sizeof(struct lm3630a_chip), + GFP_KERNEL); + if (!pchip) + return -ENOMEM; + pchip->dev = &client->dev; + + pchip->regmap = devm_regmap_init_i2c(client, &lm3630a_regmap); + if (IS_ERR(pchip->regmap)) { + rval = PTR_ERR(pchip->regmap); + dev_err(&client->dev, "fail : allocate reg. map: %d\n", rval); + return rval; + } + + i2c_set_clientdata(client, pchip); + if (pdata == NULL) { + pdata = devm_kzalloc(pchip->dev, + sizeof(struct lm3630a_platform_data), + GFP_KERNEL); + if (pdata == NULL) + return -ENOMEM; + + /* default values */ + pdata->leda_max_brt = LM3630A_MAX_BRIGHTNESS; + pdata->ledb_max_brt = LM3630A_MAX_BRIGHTNESS; + pdata->leda_init_brt = LM3630A_MAX_BRIGHTNESS; + pdata->ledb_init_brt = LM3630A_MAX_BRIGHTNESS; + + rval = lm3630a_parse_node(pchip, pdata); + if (rval) { + dev_err(&client->dev, "fail : parse node\n"); + return rval; + } + } + pchip->pdata = pdata; + + pchip->enable_gpio = devm_gpiod_get_optional(&client->dev, "enable", + GPIOD_OUT_HIGH); + if (IS_ERR(pchip->enable_gpio)) { + rval = PTR_ERR(pchip->enable_gpio); + return rval; + } + + /* chip initialize */ + rval = lm3630a_chip_init(pchip); + if (rval < 0) { + dev_err(&client->dev, "fail : init chip\n"); + return rval; + } + /* backlight register */ + rval = lm3630a_backlight_register(pchip); + if (rval < 0) { + dev_err(&client->dev, "fail : backlight register.\n"); + return rval; + } + /* pwm */ + if (pdata->pwm_ctrl != LM3630A_PWM_DISABLE) { + pchip->pwmd = devm_pwm_get(pchip->dev, "lm3630a-pwm"); + if (IS_ERR(pchip->pwmd)) { + dev_err(&client->dev, "fail : get pwm device\n"); + return PTR_ERR(pchip->pwmd); + } + + pwm_init_state(pchip->pwmd, &pchip->pwmd_state); + } + + /* interrupt enable : irq 0 is not allowed */ + pchip->irq = client->irq; + if (pchip->irq) { + rval = lm3630a_intr_config(pchip); + if (rval < 0) + return rval; + } + dev_info(&client->dev, "LM3630A backlight register OK.\n"); + return 0; +} + +static void lm3630a_remove(struct i2c_client *client) +{ + int rval; + struct lm3630a_chip *pchip = i2c_get_clientdata(client); + + rval = lm3630a_write(pchip, REG_BRT_A, 0); + if (rval < 0) + dev_err(pchip->dev, "i2c failed to access register\n"); + + rval = lm3630a_write(pchip, REG_BRT_B, 0); + if (rval < 0) + dev_err(pchip->dev, "i2c failed to access register\n"); + + if (pchip->irq) { + free_irq(pchip->irq, pchip); + destroy_workqueue(pchip->irqthread); + } +} + +static const struct i2c_device_id lm3630a_id[] = { + {LM3630A_NAME, 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, lm3630a_id); + +static const struct of_device_id lm3630a_match_table[] = { + { .compatible = "ti,lm3630a", }, + { }, +}; + +MODULE_DEVICE_TABLE(of, lm3630a_match_table); + +static struct i2c_driver lm3630a_i2c_driver = { + .driver = { + .name = LM3630A_NAME, + .of_match_table = lm3630a_match_table, + }, + .probe = lm3630a_probe, + .remove = lm3630a_remove, + .id_table = lm3630a_id, +}; + +module_i2c_driver(lm3630a_i2c_driver); + +MODULE_DESCRIPTION("Texas Instruments Backlight driver for LM3630A"); +MODULE_AUTHOR("Daniel Jeong <gshark.jeong@gmail.com>"); +MODULE_AUTHOR("LDD MLP <ldd-mlp@list.ti.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/video/backlight/lm3639_bl.c b/drivers/video/backlight/lm3639_bl.c new file mode 100644 index 0000000000..5246c17149 --- /dev/null +++ b/drivers/video/backlight/lm3639_bl.c @@ -0,0 +1,424 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* +* Simple driver for Texas Instruments LM3639 Backlight + Flash LED driver chip +* Copyright (C) 2012 Texas Instruments +*/ +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/leds.h> +#include <linux/backlight.h> +#include <linux/err.h> +#include <linux/delay.h> +#include <linux/uaccess.h> +#include <linux/interrupt.h> +#include <linux/regmap.h> +#include <linux/platform_data/lm3639_bl.h> + +#define REG_DEV_ID 0x00 +#define REG_CHECKSUM 0x01 +#define REG_BL_CONF_1 0x02 +#define REG_BL_CONF_2 0x03 +#define REG_BL_CONF_3 0x04 +#define REG_BL_CONF_4 0x05 +#define REG_FL_CONF_1 0x06 +#define REG_FL_CONF_2 0x07 +#define REG_FL_CONF_3 0x08 +#define REG_IO_CTRL 0x09 +#define REG_ENABLE 0x0A +#define REG_FLAG 0x0B +#define REG_MAX REG_FLAG + +struct lm3639_chip_data { + struct device *dev; + struct lm3639_platform_data *pdata; + + struct backlight_device *bled; + struct led_classdev cdev_flash; + struct led_classdev cdev_torch; + struct regmap *regmap; + + unsigned int bled_mode; + unsigned int bled_map; + unsigned int last_flag; +}; + +/* initialize chip */ +static int lm3639_chip_init(struct lm3639_chip_data *pchip) +{ + int ret; + unsigned int reg_val; + struct lm3639_platform_data *pdata = pchip->pdata; + + /* input pins config. */ + ret = + regmap_update_bits(pchip->regmap, REG_BL_CONF_1, 0x08, + pdata->pin_pwm); + if (ret < 0) + goto out; + + reg_val = (pdata->pin_pwm & 0x40) | pdata->pin_strobe | pdata->pin_tx; + ret = regmap_update_bits(pchip->regmap, REG_IO_CTRL, 0x7C, reg_val); + if (ret < 0) + goto out; + + /* init brightness */ + ret = regmap_write(pchip->regmap, REG_BL_CONF_4, pdata->init_brt_led); + if (ret < 0) + goto out; + + ret = regmap_write(pchip->regmap, REG_BL_CONF_3, pdata->init_brt_led); + if (ret < 0) + goto out; + + /* output pins config. */ + if (!pdata->init_brt_led) { + reg_val = pdata->fled_pins; + reg_val |= pdata->bled_pins; + } else { + reg_val = pdata->fled_pins; + reg_val |= pdata->bled_pins | 0x01; + } + + ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x79, reg_val); + if (ret < 0) + goto out; + + return ret; +out: + dev_err(pchip->dev, "i2c failed to access register\n"); + return ret; +} + +/* update and get brightness */ +static int lm3639_bled_update_status(struct backlight_device *bl) +{ + int ret; + unsigned int reg_val; + struct lm3639_chip_data *pchip = bl_get_data(bl); + struct lm3639_platform_data *pdata = pchip->pdata; + + ret = regmap_read(pchip->regmap, REG_FLAG, ®_val); + if (ret < 0) + goto out; + + if (reg_val != 0) + dev_info(pchip->dev, "last flag is 0x%x\n", reg_val); + + /* pwm control */ + if (pdata->pin_pwm) { + if (pdata->pwm_set_intensity) + pdata->pwm_set_intensity(bl->props.brightness, + pdata->max_brt_led); + else + dev_err(pchip->dev, + "No pwm control func. in plat-data\n"); + return bl->props.brightness; + } + + /* i2c control and set brigtness */ + ret = regmap_write(pchip->regmap, REG_BL_CONF_4, bl->props.brightness); + if (ret < 0) + goto out; + ret = regmap_write(pchip->regmap, REG_BL_CONF_3, bl->props.brightness); + if (ret < 0) + goto out; + + if (!bl->props.brightness) + ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x01, 0x00); + else + ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x01, 0x01); + if (ret < 0) + goto out; + + return bl->props.brightness; +out: + dev_err(pchip->dev, "i2c failed to access registers\n"); + return bl->props.brightness; +} + +static int lm3639_bled_get_brightness(struct backlight_device *bl) +{ + int ret; + unsigned int reg_val; + struct lm3639_chip_data *pchip = bl_get_data(bl); + struct lm3639_platform_data *pdata = pchip->pdata; + + if (pdata->pin_pwm) { + if (pdata->pwm_get_intensity) + bl->props.brightness = pdata->pwm_get_intensity(); + else + dev_err(pchip->dev, + "No pwm control func. in plat-data\n"); + return bl->props.brightness; + } + + ret = regmap_read(pchip->regmap, REG_BL_CONF_1, ®_val); + if (ret < 0) + goto out; + if (reg_val & 0x10) + ret = regmap_read(pchip->regmap, REG_BL_CONF_4, ®_val); + else + ret = regmap_read(pchip->regmap, REG_BL_CONF_3, ®_val); + if (ret < 0) + goto out; + bl->props.brightness = reg_val; + + return bl->props.brightness; +out: + dev_err(pchip->dev, "i2c failed to access register\n"); + return bl->props.brightness; +} + +static const struct backlight_ops lm3639_bled_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = lm3639_bled_update_status, + .get_brightness = lm3639_bled_get_brightness, +}; + +/* backlight mapping mode */ +static ssize_t lm3639_bled_mode_store(struct device *dev, + struct device_attribute *devAttr, + const char *buf, size_t size) +{ + ssize_t ret; + struct lm3639_chip_data *pchip = dev_get_drvdata(dev); + unsigned int state; + + ret = kstrtouint(buf, 10, &state); + if (ret) + goto out_input; + + if (!state) + ret = + regmap_update_bits(pchip->regmap, REG_BL_CONF_1, 0x10, + 0x00); + else + ret = + regmap_update_bits(pchip->regmap, REG_BL_CONF_1, 0x10, + 0x10); + + if (ret < 0) + goto out; + + return size; + +out: + dev_err(pchip->dev, "%s:i2c access fail to register\n", __func__); + return ret; + +out_input: + dev_err(pchip->dev, "%s:input conversion fail\n", __func__); + return ret; + +} + +static DEVICE_ATTR(bled_mode, S_IWUSR, NULL, lm3639_bled_mode_store); + +/* torch */ +static void lm3639_torch_brightness_set(struct led_classdev *cdev, + enum led_brightness brightness) +{ + int ret; + unsigned int reg_val; + struct lm3639_chip_data *pchip; + + pchip = container_of(cdev, struct lm3639_chip_data, cdev_torch); + + ret = regmap_read(pchip->regmap, REG_FLAG, ®_val); + if (ret < 0) + goto out; + if (reg_val != 0) + dev_info(pchip->dev, "last flag is 0x%x\n", reg_val); + + /* brightness 0 means off state */ + if (!brightness) { + ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x06, 0x00); + if (ret < 0) + goto out; + return; + } + + ret = regmap_update_bits(pchip->regmap, + REG_FL_CONF_1, 0x70, (brightness - 1) << 4); + if (ret < 0) + goto out; + ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x06, 0x02); + if (ret < 0) + goto out; + + return; +out: + dev_err(pchip->dev, "i2c failed to access register\n"); +} + +/* flash */ +static void lm3639_flash_brightness_set(struct led_classdev *cdev, + enum led_brightness brightness) +{ + int ret; + unsigned int reg_val; + struct lm3639_chip_data *pchip; + + pchip = container_of(cdev, struct lm3639_chip_data, cdev_flash); + + ret = regmap_read(pchip->regmap, REG_FLAG, ®_val); + if (ret < 0) + goto out; + if (reg_val != 0) + dev_info(pchip->dev, "last flag is 0x%x\n", reg_val); + + /* torch off before flash control */ + ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x06, 0x00); + if (ret < 0) + goto out; + + /* brightness 0 means off state */ + if (!brightness) + return; + + ret = regmap_update_bits(pchip->regmap, + REG_FL_CONF_1, 0x0F, brightness - 1); + if (ret < 0) + goto out; + ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x06, 0x06); + if (ret < 0) + goto out; + + return; +out: + dev_err(pchip->dev, "i2c failed to access register\n"); +} + +static const struct regmap_config lm3639_regmap = { + .reg_bits = 8, + .val_bits = 8, + .max_register = REG_MAX, +}; + +static int lm3639_probe(struct i2c_client *client) +{ + int ret; + struct lm3639_chip_data *pchip; + struct lm3639_platform_data *pdata = dev_get_platdata(&client->dev); + struct backlight_properties props; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, "i2c functionality check fail.\n"); + return -EOPNOTSUPP; + } + + if (pdata == NULL) { + dev_err(&client->dev, "Needs Platform Data.\n"); + return -ENODATA; + } + + pchip = devm_kzalloc(&client->dev, + sizeof(struct lm3639_chip_data), GFP_KERNEL); + if (!pchip) + return -ENOMEM; + + pchip->pdata = pdata; + pchip->dev = &client->dev; + + pchip->regmap = devm_regmap_init_i2c(client, &lm3639_regmap); + if (IS_ERR(pchip->regmap)) { + ret = PTR_ERR(pchip->regmap); + dev_err(&client->dev, "fail : allocate register map: %d\n", + ret); + return ret; + } + i2c_set_clientdata(client, pchip); + + /* chip initialize */ + ret = lm3639_chip_init(pchip); + if (ret < 0) { + dev_err(&client->dev, "fail : chip init\n"); + goto err_out; + } + + /* backlight */ + props.type = BACKLIGHT_RAW; + props.brightness = pdata->init_brt_led; + props.max_brightness = pdata->max_brt_led; + pchip->bled = + devm_backlight_device_register(pchip->dev, "lm3639_bled", + pchip->dev, pchip, &lm3639_bled_ops, + &props); + if (IS_ERR(pchip->bled)) { + dev_err(&client->dev, "fail : backlight register\n"); + ret = PTR_ERR(pchip->bled); + goto err_out; + } + + ret = device_create_file(&(pchip->bled->dev), &dev_attr_bled_mode); + if (ret < 0) { + dev_err(&client->dev, "failed : add sysfs entries\n"); + goto err_out; + } + + /* flash */ + pchip->cdev_flash.name = "lm3639_flash"; + pchip->cdev_flash.max_brightness = 16; + pchip->cdev_flash.brightness_set = lm3639_flash_brightness_set; + ret = led_classdev_register((struct device *) + &client->dev, &pchip->cdev_flash); + if (ret < 0) { + dev_err(&client->dev, "fail : flash register\n"); + goto err_flash; + } + + /* torch */ + pchip->cdev_torch.name = "lm3639_torch"; + pchip->cdev_torch.max_brightness = 8; + pchip->cdev_torch.brightness_set = lm3639_torch_brightness_set; + ret = led_classdev_register((struct device *) + &client->dev, &pchip->cdev_torch); + if (ret < 0) { + dev_err(&client->dev, "fail : torch register\n"); + goto err_torch; + } + + return 0; + +err_torch: + led_classdev_unregister(&pchip->cdev_flash); +err_flash: + device_remove_file(&(pchip->bled->dev), &dev_attr_bled_mode); +err_out: + return ret; +} + +static void lm3639_remove(struct i2c_client *client) +{ + struct lm3639_chip_data *pchip = i2c_get_clientdata(client); + + regmap_write(pchip->regmap, REG_ENABLE, 0x00); + + led_classdev_unregister(&pchip->cdev_torch); + led_classdev_unregister(&pchip->cdev_flash); + if (pchip->bled) + device_remove_file(&(pchip->bled->dev), &dev_attr_bled_mode); +} + +static const struct i2c_device_id lm3639_id[] = { + {LM3639_NAME, 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, lm3639_id); +static struct i2c_driver lm3639_i2c_driver = { + .driver = { + .name = LM3639_NAME, + }, + .probe = lm3639_probe, + .remove = lm3639_remove, + .id_table = lm3639_id, +}; + +module_i2c_driver(lm3639_i2c_driver); + +MODULE_DESCRIPTION("Texas Instruments Backlight+Flash LED driver for LM3639"); +MODULE_AUTHOR("Daniel Jeong <gshark.jeong@gmail.com>"); +MODULE_AUTHOR("Ldd Mlp <ldd-mlp@list.ti.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/video/backlight/lms283gf05.c b/drivers/video/backlight/lms283gf05.c new file mode 100644 index 0000000000..36856962ed --- /dev/null +++ b/drivers/video/backlight/lms283gf05.c @@ -0,0 +1,191 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * lms283gf05.c -- support for Samsung LMS283GF05 LCD + * + * Copyright (c) 2009 Marek Vasut <marek.vasut@gmail.com> + */ + +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/gpio/consumer.h> +#include <linux/lcd.h> + +#include <linux/spi/spi.h> +#include <linux/module.h> + +struct lms283gf05_state { + struct spi_device *spi; + struct lcd_device *ld; + struct gpio_desc *reset; +}; + +struct lms283gf05_seq { + unsigned char reg; + unsigned short value; + unsigned char delay; +}; + +/* Magic sequences supplied by manufacturer, for details refer to datasheet */ +static const struct lms283gf05_seq disp_initseq[] = { + /* REG, VALUE, DELAY */ + { 0x07, 0x0000, 0 }, + { 0x13, 0x0000, 10 }, + + { 0x11, 0x3004, 0 }, + { 0x14, 0x200F, 0 }, + { 0x10, 0x1a20, 0 }, + { 0x13, 0x0040, 50 }, + + { 0x13, 0x0060, 0 }, + { 0x13, 0x0070, 200 }, + + { 0x01, 0x0127, 0 }, + { 0x02, 0x0700, 0 }, + { 0x03, 0x1030, 0 }, + { 0x08, 0x0208, 0 }, + { 0x0B, 0x0620, 0 }, + { 0x0C, 0x0110, 0 }, + { 0x30, 0x0120, 0 }, + { 0x31, 0x0127, 0 }, + { 0x32, 0x0000, 0 }, + { 0x33, 0x0503, 0 }, + { 0x34, 0x0727, 0 }, + { 0x35, 0x0124, 0 }, + { 0x36, 0x0706, 0 }, + { 0x37, 0x0701, 0 }, + { 0x38, 0x0F00, 0 }, + { 0x39, 0x0F00, 0 }, + { 0x40, 0x0000, 0 }, + { 0x41, 0x0000, 0 }, + { 0x42, 0x013f, 0 }, + { 0x43, 0x0000, 0 }, + { 0x44, 0x013f, 0 }, + { 0x45, 0x0000, 0 }, + { 0x46, 0xef00, 0 }, + { 0x47, 0x013f, 0 }, + { 0x48, 0x0000, 0 }, + { 0x07, 0x0015, 30 }, + + { 0x07, 0x0017, 0 }, + + { 0x20, 0x0000, 0 }, + { 0x21, 0x0000, 0 }, + { 0x22, 0x0000, 0 } +}; + +static const struct lms283gf05_seq disp_pdwnseq[] = { + { 0x07, 0x0016, 30 }, + + { 0x07, 0x0004, 0 }, + { 0x10, 0x0220, 20 }, + + { 0x13, 0x0060, 50 }, + + { 0x13, 0x0040, 50 }, + + { 0x13, 0x0000, 0 }, + { 0x10, 0x0000, 0 } +}; + + +static void lms283gf05_reset(struct gpio_desc *gpiod) +{ + gpiod_set_value(gpiod, 0); /* De-asserted */ + mdelay(100); + gpiod_set_value(gpiod, 1); /* Asserted */ + mdelay(20); + gpiod_set_value(gpiod, 0); /* De-asserted */ + mdelay(20); +} + +static void lms283gf05_toggle(struct spi_device *spi, + const struct lms283gf05_seq *seq, int sz) +{ + char buf[3]; + int i; + + for (i = 0; i < sz; i++) { + buf[0] = 0x74; + buf[1] = 0x00; + buf[2] = seq[i].reg; + spi_write(spi, buf, 3); + + buf[0] = 0x76; + buf[1] = seq[i].value >> 8; + buf[2] = seq[i].value & 0xff; + spi_write(spi, buf, 3); + + mdelay(seq[i].delay); + } +} + +static int lms283gf05_power_set(struct lcd_device *ld, int power) +{ + struct lms283gf05_state *st = lcd_get_data(ld); + struct spi_device *spi = st->spi; + + if (power <= FB_BLANK_NORMAL) { + if (st->reset) + lms283gf05_reset(st->reset); + lms283gf05_toggle(spi, disp_initseq, ARRAY_SIZE(disp_initseq)); + } else { + lms283gf05_toggle(spi, disp_pdwnseq, ARRAY_SIZE(disp_pdwnseq)); + if (st->reset) + gpiod_set_value(st->reset, 1); /* Asserted */ + } + + return 0; +} + +static struct lcd_ops lms_ops = { + .set_power = lms283gf05_power_set, + .get_power = NULL, +}; + +static int lms283gf05_probe(struct spi_device *spi) +{ + struct lms283gf05_state *st; + struct lcd_device *ld; + + st = devm_kzalloc(&spi->dev, sizeof(struct lms283gf05_state), + GFP_KERNEL); + if (st == NULL) + return -ENOMEM; + + st->reset = gpiod_get_optional(&spi->dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(st->reset)) + return PTR_ERR(st->reset); + gpiod_set_consumer_name(st->reset, "LMS283GF05 RESET"); + + ld = devm_lcd_device_register(&spi->dev, "lms283gf05", &spi->dev, st, + &lms_ops); + if (IS_ERR(ld)) + return PTR_ERR(ld); + + st->spi = spi; + st->ld = ld; + + spi_set_drvdata(spi, st); + + /* kick in the LCD */ + if (st->reset) + lms283gf05_reset(st->reset); + lms283gf05_toggle(spi, disp_initseq, ARRAY_SIZE(disp_initseq)); + + return 0; +} + +static struct spi_driver lms283gf05_driver = { + .driver = { + .name = "lms283gf05", + }, + .probe = lms283gf05_probe, +}; + +module_spi_driver(lms283gf05_driver); + +MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); +MODULE_DESCRIPTION("LCD283GF05 LCD"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/video/backlight/lms501kf03.c b/drivers/video/backlight/lms501kf03.c new file mode 100644 index 0000000000..5c46df8022 --- /dev/null +++ b/drivers/video/backlight/lms501kf03.c @@ -0,0 +1,422 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * lms501kf03 TFT LCD panel driver. + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * Author: Jingoo Han <jg1.han@samsung.com> + */ + +#include <linux/backlight.h> +#include <linux/delay.h> +#include <linux/fb.h> +#include <linux/lcd.h> +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/wait.h> + +#define COMMAND_ONLY 0x00 +#define DATA_ONLY 0x01 + +struct lms501kf03 { + struct device *dev; + struct spi_device *spi; + unsigned int power; + struct lcd_device *ld; + struct lcd_platform_data *lcd_pd; +}; + +static const unsigned char seq_password[] = { + 0xb9, 0xff, 0x83, 0x69, +}; + +static const unsigned char seq_power[] = { + 0xb1, 0x01, 0x00, 0x34, 0x06, 0x00, 0x14, 0x14, 0x20, 0x28, + 0x12, 0x12, 0x17, 0x0a, 0x01, 0xe6, 0xe6, 0xe6, 0xe6, 0xe6, +}; + +static const unsigned char seq_display[] = { + 0xb2, 0x00, 0x2b, 0x03, 0x03, 0x70, 0x00, 0xff, 0x00, 0x00, + 0x00, 0x00, 0x03, 0x03, 0x00, 0x01, +}; + +static const unsigned char seq_rgb_if[] = { + 0xb3, 0x09, +}; + +static const unsigned char seq_display_inv[] = { + 0xb4, 0x01, 0x08, 0x77, 0x0e, 0x06, +}; + +static const unsigned char seq_vcom[] = { + 0xb6, 0x4c, 0x2e, +}; + +static const unsigned char seq_gate[] = { + 0xd5, 0x00, 0x05, 0x03, 0x29, 0x01, 0x07, 0x17, 0x68, 0x13, + 0x37, 0x20, 0x31, 0x8a, 0x46, 0x9b, 0x57, 0x13, 0x02, 0x75, + 0xb9, 0x64, 0xa8, 0x07, 0x0f, 0x04, 0x07, +}; + +static const unsigned char seq_panel[] = { + 0xcc, 0x02, +}; + +static const unsigned char seq_col_mod[] = { + 0x3a, 0x77, +}; + +static const unsigned char seq_w_gamma[] = { + 0xe0, 0x00, 0x04, 0x09, 0x0f, 0x1f, 0x3f, 0x1f, 0x2f, 0x0a, + 0x0f, 0x10, 0x16, 0x18, 0x16, 0x17, 0x0d, 0x15, 0x00, 0x04, + 0x09, 0x0f, 0x38, 0x3f, 0x20, 0x39, 0x0a, 0x0f, 0x10, 0x16, + 0x18, 0x16, 0x17, 0x0d, 0x15, +}; + +static const unsigned char seq_rgb_gamma[] = { + 0xc1, 0x01, 0x03, 0x07, 0x0f, 0x1a, 0x22, 0x2c, 0x33, 0x3c, + 0x46, 0x4f, 0x58, 0x60, 0x69, 0x71, 0x79, 0x82, 0x89, 0x92, + 0x9a, 0xa1, 0xa9, 0xb1, 0xb9, 0xc1, 0xc9, 0xcf, 0xd6, 0xde, + 0xe5, 0xec, 0xf3, 0xf9, 0xff, 0xdd, 0x39, 0x07, 0x1c, 0xcb, + 0xab, 0x5f, 0x49, 0x80, 0x03, 0x07, 0x0f, 0x19, 0x20, 0x2a, + 0x31, 0x39, 0x42, 0x4b, 0x53, 0x5b, 0x63, 0x6b, 0x73, 0x7b, + 0x83, 0x8a, 0x92, 0x9b, 0xa2, 0xaa, 0xb2, 0xba, 0xc2, 0xca, + 0xd0, 0xd8, 0xe1, 0xe8, 0xf0, 0xf8, 0xff, 0xf7, 0xd8, 0xbe, + 0xa7, 0x39, 0x40, 0x85, 0x8c, 0xc0, 0x04, 0x07, 0x0c, 0x17, + 0x1c, 0x23, 0x2b, 0x34, 0x3b, 0x43, 0x4c, 0x54, 0x5b, 0x63, + 0x6a, 0x73, 0x7a, 0x82, 0x8a, 0x91, 0x98, 0xa1, 0xa8, 0xb0, + 0xb7, 0xc1, 0xc9, 0xcf, 0xd9, 0xe3, 0xea, 0xf4, 0xff, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +}; + +static const unsigned char seq_sleep_out[] = { + 0x11, +}; + +static const unsigned char seq_display_on[] = { + 0x29, +}; + +static const unsigned char seq_display_off[] = { + 0x10, +}; + +static int lms501kf03_spi_write_byte(struct lms501kf03 *lcd, int addr, int data) +{ + u16 buf[1]; + struct spi_message msg; + + struct spi_transfer xfer = { + .len = 2, + .tx_buf = buf, + }; + + buf[0] = (addr << 8) | data; + + spi_message_init(&msg); + spi_message_add_tail(&xfer, &msg); + + return spi_sync(lcd->spi, &msg); +} + +static int lms501kf03_spi_write(struct lms501kf03 *lcd, unsigned char address, + unsigned char command) +{ + return lms501kf03_spi_write_byte(lcd, address, command); +} + +static int lms501kf03_panel_send_sequence(struct lms501kf03 *lcd, + const unsigned char *wbuf, + unsigned int len) +{ + int ret = 0, i = 0; + + while (i < len) { + if (i == 0) + ret = lms501kf03_spi_write(lcd, COMMAND_ONLY, wbuf[i]); + else + ret = lms501kf03_spi_write(lcd, DATA_ONLY, wbuf[i]); + if (ret) + break; + i += 1; + } + + return ret; +} + +static int lms501kf03_ldi_init(struct lms501kf03 *lcd) +{ + int ret, i; + static const unsigned char *init_seq[] = { + seq_password, + seq_power, + seq_display, + seq_rgb_if, + seq_display_inv, + seq_vcom, + seq_gate, + seq_panel, + seq_col_mod, + seq_w_gamma, + seq_rgb_gamma, + seq_sleep_out, + }; + + static const unsigned int size_seq[] = { + ARRAY_SIZE(seq_password), + ARRAY_SIZE(seq_power), + ARRAY_SIZE(seq_display), + ARRAY_SIZE(seq_rgb_if), + ARRAY_SIZE(seq_display_inv), + ARRAY_SIZE(seq_vcom), + ARRAY_SIZE(seq_gate), + ARRAY_SIZE(seq_panel), + ARRAY_SIZE(seq_col_mod), + ARRAY_SIZE(seq_w_gamma), + ARRAY_SIZE(seq_rgb_gamma), + ARRAY_SIZE(seq_sleep_out), + }; + + for (i = 0; i < ARRAY_SIZE(init_seq); i++) { + ret = lms501kf03_panel_send_sequence(lcd, init_seq[i], + size_seq[i]); + if (ret) + break; + } + /* + * According to the datasheet, 120ms delay time is required. + * After sleep out sequence, command is blocked for 120ms. + * Thus, LDI should wait for 120ms. + */ + msleep(120); + + return ret; +} + +static int lms501kf03_ldi_enable(struct lms501kf03 *lcd) +{ + return lms501kf03_panel_send_sequence(lcd, seq_display_on, + ARRAY_SIZE(seq_display_on)); +} + +static int lms501kf03_ldi_disable(struct lms501kf03 *lcd) +{ + return lms501kf03_panel_send_sequence(lcd, seq_display_off, + ARRAY_SIZE(seq_display_off)); +} + +static int lms501kf03_power_is_on(int power) +{ + return (power) <= FB_BLANK_NORMAL; +} + +static int lms501kf03_power_on(struct lms501kf03 *lcd) +{ + int ret = 0; + struct lcd_platform_data *pd; + + pd = lcd->lcd_pd; + + if (!pd->power_on) { + dev_err(lcd->dev, "power_on is NULL.\n"); + return -EINVAL; + } + + pd->power_on(lcd->ld, 1); + msleep(pd->power_on_delay); + + if (!pd->reset) { + dev_err(lcd->dev, "reset is NULL.\n"); + return -EINVAL; + } + + pd->reset(lcd->ld); + msleep(pd->reset_delay); + + ret = lms501kf03_ldi_init(lcd); + if (ret) { + dev_err(lcd->dev, "failed to initialize ldi.\n"); + return ret; + } + + ret = lms501kf03_ldi_enable(lcd); + if (ret) { + dev_err(lcd->dev, "failed to enable ldi.\n"); + return ret; + } + + return 0; +} + +static int lms501kf03_power_off(struct lms501kf03 *lcd) +{ + int ret = 0; + struct lcd_platform_data *pd; + + pd = lcd->lcd_pd; + + ret = lms501kf03_ldi_disable(lcd); + if (ret) { + dev_err(lcd->dev, "lcd setting failed.\n"); + return -EIO; + } + + msleep(pd->power_off_delay); + + pd->power_on(lcd->ld, 0); + + return 0; +} + +static int lms501kf03_power(struct lms501kf03 *lcd, int power) +{ + int ret = 0; + + if (lms501kf03_power_is_on(power) && + !lms501kf03_power_is_on(lcd->power)) + ret = lms501kf03_power_on(lcd); + else if (!lms501kf03_power_is_on(power) && + lms501kf03_power_is_on(lcd->power)) + ret = lms501kf03_power_off(lcd); + + if (!ret) + lcd->power = power; + + return ret; +} + +static int lms501kf03_get_power(struct lcd_device *ld) +{ + struct lms501kf03 *lcd = lcd_get_data(ld); + + return lcd->power; +} + +static int lms501kf03_set_power(struct lcd_device *ld, int power) +{ + struct lms501kf03 *lcd = lcd_get_data(ld); + + if (power != FB_BLANK_UNBLANK && power != FB_BLANK_POWERDOWN && + power != FB_BLANK_NORMAL) { + dev_err(lcd->dev, "power value should be 0, 1 or 4.\n"); + return -EINVAL; + } + + return lms501kf03_power(lcd, power); +} + +static struct lcd_ops lms501kf03_lcd_ops = { + .get_power = lms501kf03_get_power, + .set_power = lms501kf03_set_power, +}; + +static int lms501kf03_probe(struct spi_device *spi) +{ + struct lms501kf03 *lcd = NULL; + struct lcd_device *ld = NULL; + int ret = 0; + + lcd = devm_kzalloc(&spi->dev, sizeof(struct lms501kf03), GFP_KERNEL); + if (!lcd) + return -ENOMEM; + + /* lms501kf03 lcd panel uses 3-wire 9-bit SPI Mode. */ + spi->bits_per_word = 9; + + ret = spi_setup(spi); + if (ret < 0) { + dev_err(&spi->dev, "spi setup failed.\n"); + return ret; + } + + lcd->spi = spi; + lcd->dev = &spi->dev; + + lcd->lcd_pd = dev_get_platdata(&spi->dev); + if (!lcd->lcd_pd) { + dev_err(&spi->dev, "platform data is NULL\n"); + return -EINVAL; + } + + ld = devm_lcd_device_register(&spi->dev, "lms501kf03", &spi->dev, lcd, + &lms501kf03_lcd_ops); + if (IS_ERR(ld)) + return PTR_ERR(ld); + + lcd->ld = ld; + + if (!lcd->lcd_pd->lcd_enabled) { + /* + * if lcd panel was off from bootloader then + * current lcd status is powerdown and then + * it enables lcd panel. + */ + lcd->power = FB_BLANK_POWERDOWN; + + lms501kf03_power(lcd, FB_BLANK_UNBLANK); + } else { + lcd->power = FB_BLANK_UNBLANK; + } + + spi_set_drvdata(spi, lcd); + + dev_info(&spi->dev, "lms501kf03 panel driver has been probed.\n"); + + return 0; +} + +static void lms501kf03_remove(struct spi_device *spi) +{ + struct lms501kf03 *lcd = spi_get_drvdata(spi); + + lms501kf03_power(lcd, FB_BLANK_POWERDOWN); +} + +#ifdef CONFIG_PM_SLEEP +static int lms501kf03_suspend(struct device *dev) +{ + struct lms501kf03 *lcd = dev_get_drvdata(dev); + + dev_dbg(dev, "lcd->power = %d\n", lcd->power); + + /* + * when lcd panel is suspend, lcd panel becomes off + * regardless of status. + */ + return lms501kf03_power(lcd, FB_BLANK_POWERDOWN); +} + +static int lms501kf03_resume(struct device *dev) +{ + struct lms501kf03 *lcd = dev_get_drvdata(dev); + + lcd->power = FB_BLANK_POWERDOWN; + + return lms501kf03_power(lcd, FB_BLANK_UNBLANK); +} +#endif + +static SIMPLE_DEV_PM_OPS(lms501kf03_pm_ops, lms501kf03_suspend, + lms501kf03_resume); + +static void lms501kf03_shutdown(struct spi_device *spi) +{ + struct lms501kf03 *lcd = spi_get_drvdata(spi); + + lms501kf03_power(lcd, FB_BLANK_POWERDOWN); +} + +static struct spi_driver lms501kf03_driver = { + .driver = { + .name = "lms501kf03", + .pm = &lms501kf03_pm_ops, + }, + .probe = lms501kf03_probe, + .remove = lms501kf03_remove, + .shutdown = lms501kf03_shutdown, +}; + +module_spi_driver(lms501kf03_driver); + +MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>"); +MODULE_DESCRIPTION("lms501kf03 LCD Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/backlight/locomolcd.c b/drivers/video/backlight/locomolcd.c new file mode 100644 index 0000000000..346d3e29a8 --- /dev/null +++ b/drivers/video/backlight/locomolcd.c @@ -0,0 +1,240 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Backlight control code for Sharp Zaurus SL-5500 + * + * Copyright 2005 John Lenz <lenz@cs.wisc.edu> + * Maintainer: Pavel Machek <pavel@ucw.cz> (unless John wants to :-) + * + * This driver assumes single CPU. That's okay, because collie is + * slightly old hardware, and no one is going to retrofit second CPU to + * old PDA. + */ + +/* LCD power functions */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/fb.h> +#include <linux/backlight.h> + +#include <asm/hardware/locomo.h> +#include <asm/irq.h> +#include <asm/mach/sharpsl_param.h> +#include <asm/mach-types.h> + +#include "../../../arch/arm/mach-sa1100/generic.h" + +static struct backlight_device *locomolcd_bl_device; +static struct locomo_dev *locomolcd_dev; +static unsigned long locomolcd_flags; +#define LOCOMOLCD_SUSPENDED 0x01 + +static void locomolcd_on(int comadj) +{ + locomo_gpio_set_dir(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHA_ON, 0); + locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHA_ON, 1); + mdelay(2); + + locomo_gpio_set_dir(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHD_ON, 0); + locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHD_ON, 1); + mdelay(2); + + locomo_m62332_senddata(locomolcd_dev, comadj, 0); + mdelay(5); + + locomo_gpio_set_dir(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VEE_ON, 0); + locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VEE_ON, 1); + mdelay(10); + + /* TFTCRST | CPSOUT=0 | CPSEN */ + locomo_writel(0x01, locomolcd_dev->mapbase + LOCOMO_TC); + + /* Set CPSD */ + locomo_writel(6, locomolcd_dev->mapbase + LOCOMO_CPSD); + + /* TFTCRST | CPSOUT=0 | CPSEN */ + locomo_writel((0x04 | 0x01), locomolcd_dev->mapbase + LOCOMO_TC); + mdelay(10); + + locomo_gpio_set_dir(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_MOD, 0); + locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_MOD, 1); +} + +static void locomolcd_off(int comadj) +{ + /* TFTCRST=1 | CPSOUT=1 | CPSEN = 0 */ + locomo_writel(0x06, locomolcd_dev->mapbase + LOCOMO_TC); + mdelay(1); + + locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHA_ON, 0); + mdelay(110); + + locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VEE_ON, 0); + mdelay(700); + + /* TFTCRST=0 | CPSOUT=0 | CPSEN = 0 */ + locomo_writel(0, locomolcd_dev->mapbase + LOCOMO_TC); + locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_MOD, 0); + locomo_gpio_write(locomolcd_dev->dev.parent, LOCOMO_GPIO_LCD_VSHD_ON, 0); +} + +void locomolcd_power(int on) +{ + int comadj = sharpsl_param.comadj; + unsigned long flags; + + local_irq_save(flags); + + if (!locomolcd_dev) { + local_irq_restore(flags); + return; + } + + /* read comadj */ + if (comadj == -1 && machine_is_collie()) + comadj = 128; + + if (on) + locomolcd_on(comadj); + else + locomolcd_off(comadj); + + local_irq_restore(flags); +} +EXPORT_SYMBOL(locomolcd_power); + +static int current_intensity; + +static int locomolcd_set_intensity(struct backlight_device *bd) +{ + int intensity = backlight_get_brightness(bd); + + if (locomolcd_flags & LOCOMOLCD_SUSPENDED) + intensity = 0; + + switch (intensity) { + /* + * AC and non-AC are handled differently, + * but produce same results in sharp code? + */ + case 0: + locomo_frontlight_set(locomolcd_dev, 0, 0, 161); + break; + case 1: + locomo_frontlight_set(locomolcd_dev, 117, 0, 161); + break; + case 2: + locomo_frontlight_set(locomolcd_dev, 163, 0, 148); + break; + case 3: + locomo_frontlight_set(locomolcd_dev, 194, 0, 161); + break; + case 4: + locomo_frontlight_set(locomolcd_dev, 194, 1, 161); + break; + default: + return -ENODEV; + } + current_intensity = intensity; + return 0; +} + +static int locomolcd_get_intensity(struct backlight_device *bd) +{ + return current_intensity; +} + +static const struct backlight_ops locomobl_data = { + .get_brightness = locomolcd_get_intensity, + .update_status = locomolcd_set_intensity, +}; + +#ifdef CONFIG_PM_SLEEP +static int locomolcd_suspend(struct device *dev) +{ + locomolcd_flags |= LOCOMOLCD_SUSPENDED; + locomolcd_set_intensity(locomolcd_bl_device); + return 0; +} + +static int locomolcd_resume(struct device *dev) +{ + locomolcd_flags &= ~LOCOMOLCD_SUSPENDED; + locomolcd_set_intensity(locomolcd_bl_device); + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(locomolcd_pm_ops, locomolcd_suspend, locomolcd_resume); + +static int locomolcd_probe(struct locomo_dev *ldev) +{ + struct backlight_properties props; + unsigned long flags; + + local_irq_save(flags); + locomolcd_dev = ldev; + + locomo_gpio_set_dir(ldev->dev.parent, LOCOMO_GPIO_FL_VR, 0); + + local_irq_restore(flags); + + memset(&props, 0, sizeof(struct backlight_properties)); + props.type = BACKLIGHT_RAW; + props.max_brightness = 4; + locomolcd_bl_device = backlight_device_register("locomo-bl", + &ldev->dev, NULL, + &locomobl_data, &props); + + if (IS_ERR(locomolcd_bl_device)) + return PTR_ERR(locomolcd_bl_device); + + /* Set up frontlight so that screen is readable */ + locomolcd_bl_device->props.brightness = 2; + locomolcd_set_intensity(locomolcd_bl_device); + + return 0; +} + +static void locomolcd_remove(struct locomo_dev *dev) +{ + unsigned long flags; + + locomolcd_bl_device->props.brightness = 0; + locomolcd_bl_device->props.power = 0; + locomolcd_set_intensity(locomolcd_bl_device); + + backlight_device_unregister(locomolcd_bl_device); + local_irq_save(flags); + locomolcd_dev = NULL; + local_irq_restore(flags); +} + +static struct locomo_driver poodle_lcd_driver = { + .drv = { + .name = "locomo-backlight", + .pm = &locomolcd_pm_ops, + }, + .devid = LOCOMO_DEVID_BACKLIGHT, + .probe = locomolcd_probe, + .remove = locomolcd_remove, +}; + +static int __init locomolcd_init(void) +{ + return locomo_driver_register(&poodle_lcd_driver); +} + +static void __exit locomolcd_exit(void) +{ + locomo_driver_unregister(&poodle_lcd_driver); +} + +module_init(locomolcd_init); +module_exit(locomolcd_exit); + +MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>, Pavel Machek <pavel@ucw.cz>"); +MODULE_DESCRIPTION("Collie LCD driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c new file mode 100644 index 0000000000..da1f124db6 --- /dev/null +++ b/drivers/video/backlight/lp855x_bl.c @@ -0,0 +1,608 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * TI LP855x Backlight Driver + * + * Copyright (C) 2011 Texas Instruments + */ + +#include <linux/acpi.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/backlight.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/platform_data/lp855x.h> +#include <linux/pwm.h> +#include <linux/regulator/consumer.h> + +/* LP8550/1/2/3/6 Registers */ +#define LP855X_BRIGHTNESS_CTRL 0x00 +#define LP855X_DEVICE_CTRL 0x01 +#define LP855X_EEPROM_START 0xA0 +#define LP855X_EEPROM_END 0xA7 +#define LP8556_EPROM_START 0xA0 +#define LP8556_EPROM_END 0xAF + +/* LP8555/7 Registers */ +#define LP8557_BL_CMD 0x00 +#define LP8557_BL_MASK 0x01 +#define LP8557_BL_ON 0x01 +#define LP8557_BL_OFF 0x00 +#define LP8557_BRIGHTNESS_CTRL 0x04 +#define LP8557_CONFIG 0x10 +#define LP8555_EPROM_START 0x10 +#define LP8555_EPROM_END 0x7A +#define LP8557_EPROM_START 0x10 +#define LP8557_EPROM_END 0x1E + +#define DEFAULT_BL_NAME "lcd-backlight" +#define MAX_BRIGHTNESS 255 + +enum lp855x_brightness_ctrl_mode { + PWM_BASED = 1, + REGISTER_BASED, +}; + +struct lp855x; + +/* + * struct lp855x_device_config + * @pre_init_device: init device function call before updating the brightness + * @reg_brightness: register address for brigthenss control + * @reg_devicectrl: register address for device control + * @post_init_device: late init device function call + */ +struct lp855x_device_config { + int (*pre_init_device)(struct lp855x *); + u8 reg_brightness; + u8 reg_devicectrl; + int (*post_init_device)(struct lp855x *); +}; + +struct lp855x { + const char *chipname; + enum lp855x_chip_id chip_id; + enum lp855x_brightness_ctrl_mode mode; + struct lp855x_device_config *cfg; + struct i2c_client *client; + struct backlight_device *bl; + struct device *dev; + struct lp855x_platform_data *pdata; + struct pwm_device *pwm; + bool needs_pwm_init; + struct regulator *supply; /* regulator for VDD input */ + struct regulator *enable; /* regulator for EN/VDDIO input */ +}; + +static int lp855x_write_byte(struct lp855x *lp, u8 reg, u8 data) +{ + return i2c_smbus_write_byte_data(lp->client, reg, data); +} + +static int lp855x_update_bit(struct lp855x *lp, u8 reg, u8 mask, u8 data) +{ + int ret; + u8 tmp; + + ret = i2c_smbus_read_byte_data(lp->client, reg); + if (ret < 0) { + dev_err(lp->dev, "failed to read 0x%.2x\n", reg); + return ret; + } + + tmp = (u8)ret; + tmp &= ~mask; + tmp |= data & mask; + + return lp855x_write_byte(lp, reg, tmp); +} + +static bool lp855x_is_valid_rom_area(struct lp855x *lp, u8 addr) +{ + u8 start, end; + + switch (lp->chip_id) { + case LP8550: + case LP8551: + case LP8552: + case LP8553: + start = LP855X_EEPROM_START; + end = LP855X_EEPROM_END; + break; + case LP8556: + start = LP8556_EPROM_START; + end = LP8556_EPROM_END; + break; + case LP8555: + start = LP8555_EPROM_START; + end = LP8555_EPROM_END; + break; + case LP8557: + start = LP8557_EPROM_START; + end = LP8557_EPROM_END; + break; + default: + return false; + } + + return addr >= start && addr <= end; +} + +static int lp8557_bl_off(struct lp855x *lp) +{ + /* BL_ON = 0 before updating EPROM settings */ + return lp855x_update_bit(lp, LP8557_BL_CMD, LP8557_BL_MASK, + LP8557_BL_OFF); +} + +static int lp8557_bl_on(struct lp855x *lp) +{ + /* BL_ON = 1 after updating EPROM settings */ + return lp855x_update_bit(lp, LP8557_BL_CMD, LP8557_BL_MASK, + LP8557_BL_ON); +} + +static struct lp855x_device_config lp855x_dev_cfg = { + .reg_brightness = LP855X_BRIGHTNESS_CTRL, + .reg_devicectrl = LP855X_DEVICE_CTRL, +}; + +static struct lp855x_device_config lp8557_dev_cfg = { + .reg_brightness = LP8557_BRIGHTNESS_CTRL, + .reg_devicectrl = LP8557_CONFIG, + .pre_init_device = lp8557_bl_off, + .post_init_device = lp8557_bl_on, +}; + +/* + * Device specific configuration flow + * + * a) pre_init_device(optional) + * b) update the brightness register + * c) update device control register + * d) update ROM area(optional) + * e) post_init_device(optional) + * + */ +static int lp855x_configure(struct lp855x *lp) +{ + u8 val, addr; + int i, ret; + struct lp855x_platform_data *pd = lp->pdata; + + if (lp->cfg->pre_init_device) { + ret = lp->cfg->pre_init_device(lp); + if (ret) { + dev_err(lp->dev, "pre init device err: %d\n", ret); + goto err; + } + } + + val = pd->initial_brightness; + ret = lp855x_write_byte(lp, lp->cfg->reg_brightness, val); + if (ret) + goto err; + + val = pd->device_control; + ret = lp855x_write_byte(lp, lp->cfg->reg_devicectrl, val); + if (ret) + goto err; + + if (pd->size_program > 0) { + for (i = 0; i < pd->size_program; i++) { + addr = pd->rom_data[i].addr; + val = pd->rom_data[i].val; + if (!lp855x_is_valid_rom_area(lp, addr)) + continue; + + ret = lp855x_write_byte(lp, addr, val); + if (ret) + goto err; + } + } + + if (lp->cfg->post_init_device) { + ret = lp->cfg->post_init_device(lp); + if (ret) { + dev_err(lp->dev, "post init device err: %d\n", ret); + goto err; + } + } + + return 0; + +err: + return ret; +} + +static int lp855x_pwm_ctrl(struct lp855x *lp, int br, int max_br) +{ + struct pwm_state state; + + if (lp->needs_pwm_init) { + pwm_init_state(lp->pwm, &state); + /* Legacy platform data compatibility */ + if (lp->pdata->period_ns > 0) + state.period = lp->pdata->period_ns; + lp->needs_pwm_init = false; + } else { + pwm_get_state(lp->pwm, &state); + } + + state.duty_cycle = div_u64(br * state.period, max_br); + state.enabled = state.duty_cycle; + + return pwm_apply_state(lp->pwm, &state); +} + +static int lp855x_bl_update_status(struct backlight_device *bl) +{ + struct lp855x *lp = bl_get_data(bl); + int brightness = bl->props.brightness; + + if (bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK)) + brightness = 0; + + if (lp->mode == PWM_BASED) + return lp855x_pwm_ctrl(lp, brightness, + bl->props.max_brightness); + else if (lp->mode == REGISTER_BASED) + return lp855x_write_byte(lp, lp->cfg->reg_brightness, + (u8)brightness); + return -EINVAL; +} + +static const struct backlight_ops lp855x_bl_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = lp855x_bl_update_status, +}; + +static int lp855x_backlight_register(struct lp855x *lp) +{ + struct backlight_device *bl; + struct backlight_properties props; + struct lp855x_platform_data *pdata = lp->pdata; + const char *name = pdata->name ? : DEFAULT_BL_NAME; + + memset(&props, 0, sizeof(props)); + props.type = BACKLIGHT_PLATFORM; + props.max_brightness = MAX_BRIGHTNESS; + + if (pdata->initial_brightness > props.max_brightness) + pdata->initial_brightness = props.max_brightness; + + props.brightness = pdata->initial_brightness; + + bl = devm_backlight_device_register(lp->dev, name, lp->dev, lp, + &lp855x_bl_ops, &props); + if (IS_ERR(bl)) + return PTR_ERR(bl); + + lp->bl = bl; + + return 0; +} + +static ssize_t lp855x_get_chip_id(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct lp855x *lp = dev_get_drvdata(dev); + + return scnprintf(buf, PAGE_SIZE, "%s\n", lp->chipname); +} + +static ssize_t lp855x_get_bl_ctl_mode(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct lp855x *lp = dev_get_drvdata(dev); + char *strmode = NULL; + + if (lp->mode == PWM_BASED) + strmode = "pwm based"; + else if (lp->mode == REGISTER_BASED) + strmode = "register based"; + + return scnprintf(buf, PAGE_SIZE, "%s\n", strmode); +} + +static DEVICE_ATTR(chip_id, S_IRUGO, lp855x_get_chip_id, NULL); +static DEVICE_ATTR(bl_ctl_mode, S_IRUGO, lp855x_get_bl_ctl_mode, NULL); + +static struct attribute *lp855x_attributes[] = { + &dev_attr_chip_id.attr, + &dev_attr_bl_ctl_mode.attr, + NULL, +}; + +static const struct attribute_group lp855x_attr_group = { + .attrs = lp855x_attributes, +}; + +#ifdef CONFIG_OF +static int lp855x_parse_dt(struct lp855x *lp) +{ + struct device *dev = lp->dev; + struct device_node *node = dev->of_node; + struct lp855x_platform_data *pdata = lp->pdata; + int rom_length; + + if (!node) { + dev_err(dev, "no platform data\n"); + return -EINVAL; + } + + of_property_read_string(node, "bl-name", &pdata->name); + of_property_read_u8(node, "dev-ctrl", &pdata->device_control); + of_property_read_u8(node, "init-brt", &pdata->initial_brightness); + /* Deprecated, specify period in pwms property instead */ + of_property_read_u32(node, "pwm-period", &pdata->period_ns); + + /* Fill ROM platform data if defined */ + rom_length = of_get_child_count(node); + if (rom_length > 0) { + struct lp855x_rom_data *rom; + struct device_node *child; + int i = 0; + + rom = devm_kcalloc(dev, rom_length, sizeof(*rom), GFP_KERNEL); + if (!rom) + return -ENOMEM; + + for_each_child_of_node(node, child) { + of_property_read_u8(child, "rom-addr", &rom[i].addr); + of_property_read_u8(child, "rom-val", &rom[i].val); + i++; + } + + pdata->size_program = rom_length; + pdata->rom_data = &rom[0]; + } + + return 0; +} +#else +static int lp855x_parse_dt(struct lp855x *lp) +{ + return -EINVAL; +} +#endif + +static int lp855x_parse_acpi(struct lp855x *lp) +{ + int ret; + + /* + * On ACPI the device has already been initialized by the firmware + * and is in register mode, so we can read back the settings from + * the registers. + */ + ret = i2c_smbus_read_byte_data(lp->client, lp->cfg->reg_brightness); + if (ret < 0) + return ret; + + lp->pdata->initial_brightness = ret; + + ret = i2c_smbus_read_byte_data(lp->client, lp->cfg->reg_devicectrl); + if (ret < 0) + return ret; + + lp->pdata->device_control = ret; + return 0; +} + +static int lp855x_probe(struct i2c_client *cl) +{ + const struct i2c_device_id *id = i2c_client_get_device_id(cl); + const struct acpi_device_id *acpi_id = NULL; + struct device *dev = &cl->dev; + struct lp855x *lp; + int ret; + + if (!i2c_check_functionality(cl->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) + return -EIO; + + lp = devm_kzalloc(dev, sizeof(struct lp855x), GFP_KERNEL); + if (!lp) + return -ENOMEM; + + lp->client = cl; + lp->dev = dev; + lp->pdata = dev_get_platdata(dev); + + if (id) { + lp->chipname = id->name; + lp->chip_id = id->driver_data; + } else { + acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev); + if (!acpi_id) + return -ENODEV; + + lp->chipname = acpi_id->id; + lp->chip_id = acpi_id->driver_data; + } + + switch (lp->chip_id) { + case LP8550: + case LP8551: + case LP8552: + case LP8553: + case LP8556: + lp->cfg = &lp855x_dev_cfg; + break; + case LP8555: + case LP8557: + lp->cfg = &lp8557_dev_cfg; + break; + default: + return -EINVAL; + } + + if (!lp->pdata) { + lp->pdata = devm_kzalloc(dev, sizeof(*lp->pdata), GFP_KERNEL); + if (!lp->pdata) + return -ENOMEM; + + if (id) { + ret = lp855x_parse_dt(lp); + if (ret < 0) + return ret; + } else { + ret = lp855x_parse_acpi(lp); + if (ret < 0) + return ret; + } + } + + lp->supply = devm_regulator_get(dev, "power"); + if (IS_ERR(lp->supply)) { + if (PTR_ERR(lp->supply) == -EPROBE_DEFER) + return -EPROBE_DEFER; + lp->supply = NULL; + } + + lp->enable = devm_regulator_get_optional(dev, "enable"); + if (IS_ERR(lp->enable)) { + ret = PTR_ERR(lp->enable); + if (ret == -ENODEV) + lp->enable = NULL; + else + return dev_err_probe(dev, ret, "getting enable regulator\n"); + } + + lp->pwm = devm_pwm_get(lp->dev, lp->chipname); + if (IS_ERR(lp->pwm)) { + ret = PTR_ERR(lp->pwm); + if (ret == -ENODEV || ret == -EINVAL) + lp->pwm = NULL; + else + return dev_err_probe(dev, ret, "getting PWM\n"); + + lp->needs_pwm_init = false; + lp->mode = REGISTER_BASED; + dev_dbg(dev, "mode: register based\n"); + } else { + lp->needs_pwm_init = true; + lp->mode = PWM_BASED; + dev_dbg(dev, "mode: PWM based\n"); + } + + if (lp->supply) { + ret = regulator_enable(lp->supply); + if (ret < 0) { + dev_err(dev, "failed to enable supply: %d\n", ret); + return ret; + } + } + + if (lp->enable) { + ret = regulator_enable(lp->enable); + if (ret < 0) { + dev_err(dev, "failed to enable vddio: %d\n", ret); + goto disable_supply; + } + + /* + * LP8555 datasheet says t_RESPONSE (time between VDDIO and + * I2C) is 1ms. + */ + usleep_range(1000, 2000); + } + + i2c_set_clientdata(cl, lp); + + ret = lp855x_configure(lp); + if (ret) { + dev_err(dev, "device config err: %d", ret); + goto disable_vddio; + } + + ret = lp855x_backlight_register(lp); + if (ret) { + dev_err(dev, "failed to register backlight. err: %d\n", ret); + goto disable_vddio; + } + + ret = sysfs_create_group(&dev->kobj, &lp855x_attr_group); + if (ret) { + dev_err(dev, "failed to register sysfs. err: %d\n", ret); + goto disable_vddio; + } + + backlight_update_status(lp->bl); + + return 0; + +disable_vddio: + if (lp->enable) + regulator_disable(lp->enable); +disable_supply: + if (lp->supply) + regulator_disable(lp->supply); + + return ret; +} + +static void lp855x_remove(struct i2c_client *cl) +{ + struct lp855x *lp = i2c_get_clientdata(cl); + + lp->bl->props.brightness = 0; + backlight_update_status(lp->bl); + if (lp->enable) + regulator_disable(lp->enable); + if (lp->supply) + regulator_disable(lp->supply); + sysfs_remove_group(&lp->dev->kobj, &lp855x_attr_group); +} + +static const struct of_device_id lp855x_dt_ids[] __maybe_unused = { + { .compatible = "ti,lp8550", }, + { .compatible = "ti,lp8551", }, + { .compatible = "ti,lp8552", }, + { .compatible = "ti,lp8553", }, + { .compatible = "ti,lp8555", }, + { .compatible = "ti,lp8556", }, + { .compatible = "ti,lp8557", }, + { } +}; +MODULE_DEVICE_TABLE(of, lp855x_dt_ids); + +static const struct i2c_device_id lp855x_ids[] = { + {"lp8550", LP8550}, + {"lp8551", LP8551}, + {"lp8552", LP8552}, + {"lp8553", LP8553}, + {"lp8555", LP8555}, + {"lp8556", LP8556}, + {"lp8557", LP8557}, + { } +}; +MODULE_DEVICE_TABLE(i2c, lp855x_ids); + +#ifdef CONFIG_ACPI +static const struct acpi_device_id lp855x_acpi_match[] = { + /* Xiaomi specific HID used for the LP8556 on the Mi Pad 2 */ + { "XMCC0001", LP8556 }, + { } +}; +MODULE_DEVICE_TABLE(acpi, lp855x_acpi_match); +#endif + +static struct i2c_driver lp855x_driver = { + .driver = { + .name = "lp855x", + .of_match_table = of_match_ptr(lp855x_dt_ids), + .acpi_match_table = ACPI_PTR(lp855x_acpi_match), + }, + .probe = lp855x_probe, + .remove = lp855x_remove, + .id_table = lp855x_ids, +}; + +module_i2c_driver(lp855x_driver); + +MODULE_DESCRIPTION("Texas Instruments LP855x Backlight driver"); +MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/backlight/lp8788_bl.c b/drivers/video/backlight/lp8788_bl.c new file mode 100644 index 0000000000..d1a14b0db2 --- /dev/null +++ b/drivers/video/backlight/lp8788_bl.c @@ -0,0 +1,324 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * TI LP8788 MFD - backlight driver + * + * Copyright 2012 Texas Instruments + * + * Author: Milo(Woogyom) Kim <milo.kim@ti.com> + */ + +#include <linux/backlight.h> +#include <linux/err.h> +#include <linux/mfd/lp8788.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> +#include <linux/slab.h> + +/* Register address */ +#define LP8788_BL_CONFIG 0x96 +#define LP8788_BL_EN BIT(0) +#define LP8788_BL_PWM_INPUT_EN BIT(5) +#define LP8788_BL_FULLSCALE_SHIFT 2 +#define LP8788_BL_DIM_MODE_SHIFT 1 +#define LP8788_BL_PWM_POLARITY_SHIFT 6 + +#define LP8788_BL_BRIGHTNESS 0x97 + +#define LP8788_BL_RAMP 0x98 +#define LP8788_BL_RAMP_RISE_SHIFT 4 + +#define MAX_BRIGHTNESS 127 +#define DEFAULT_BL_NAME "lcd-backlight" + +struct lp8788_bl_config { + enum lp8788_bl_ctrl_mode bl_mode; + enum lp8788_bl_dim_mode dim_mode; + enum lp8788_bl_full_scale_current full_scale; + enum lp8788_bl_ramp_step rise_time; + enum lp8788_bl_ramp_step fall_time; + enum pwm_polarity pwm_pol; +}; + +struct lp8788_bl { + struct lp8788 *lp; + struct backlight_device *bl_dev; + struct lp8788_backlight_platform_data *pdata; + enum lp8788_bl_ctrl_mode mode; + struct pwm_device *pwm; +}; + +static struct lp8788_bl_config default_bl_config = { + .bl_mode = LP8788_BL_REGISTER_ONLY, + .dim_mode = LP8788_DIM_EXPONENTIAL, + .full_scale = LP8788_FULLSCALE_1900uA, + .rise_time = LP8788_RAMP_8192us, + .fall_time = LP8788_RAMP_8192us, + .pwm_pol = PWM_POLARITY_NORMAL, +}; + +static inline bool is_brightness_ctrl_by_pwm(enum lp8788_bl_ctrl_mode mode) +{ + return mode == LP8788_BL_COMB_PWM_BASED; +} + +static inline bool is_brightness_ctrl_by_register(enum lp8788_bl_ctrl_mode mode) +{ + return mode == LP8788_BL_REGISTER_ONLY || + mode == LP8788_BL_COMB_REGISTER_BASED; +} + +static int lp8788_backlight_configure(struct lp8788_bl *bl) +{ + struct lp8788_backlight_platform_data *pdata = bl->pdata; + struct lp8788_bl_config *cfg = &default_bl_config; + int ret; + u8 val; + + /* + * Update chip configuration if platform data exists, + * otherwise use the default settings. + */ + if (pdata) { + cfg->bl_mode = pdata->bl_mode; + cfg->dim_mode = pdata->dim_mode; + cfg->full_scale = pdata->full_scale; + cfg->rise_time = pdata->rise_time; + cfg->fall_time = pdata->fall_time; + cfg->pwm_pol = pdata->pwm_pol; + } + + /* Brightness ramp up/down */ + val = (cfg->rise_time << LP8788_BL_RAMP_RISE_SHIFT) | cfg->fall_time; + ret = lp8788_write_byte(bl->lp, LP8788_BL_RAMP, val); + if (ret) + return ret; + + /* Fullscale current setting */ + val = (cfg->full_scale << LP8788_BL_FULLSCALE_SHIFT) | + (cfg->dim_mode << LP8788_BL_DIM_MODE_SHIFT); + + /* Brightness control mode */ + switch (cfg->bl_mode) { + case LP8788_BL_REGISTER_ONLY: + val |= LP8788_BL_EN; + break; + case LP8788_BL_COMB_PWM_BASED: + case LP8788_BL_COMB_REGISTER_BASED: + val |= LP8788_BL_EN | LP8788_BL_PWM_INPUT_EN | + (cfg->pwm_pol << LP8788_BL_PWM_POLARITY_SHIFT); + break; + default: + dev_err(bl->lp->dev, "invalid mode: %d\n", cfg->bl_mode); + return -EINVAL; + } + + bl->mode = cfg->bl_mode; + + return lp8788_write_byte(bl->lp, LP8788_BL_CONFIG, val); +} + +static void lp8788_pwm_ctrl(struct lp8788_bl *bl, int br, int max_br) +{ + unsigned int period; + unsigned int duty; + struct device *dev; + struct pwm_device *pwm; + + if (!bl->pdata) + return; + + period = bl->pdata->period_ns; + duty = br * period / max_br; + dev = bl->lp->dev; + + /* request PWM device with the consumer name */ + if (!bl->pwm) { + pwm = devm_pwm_get(dev, LP8788_DEV_BACKLIGHT); + if (IS_ERR(pwm)) { + dev_err(dev, "can not get PWM device\n"); + return; + } + + bl->pwm = pwm; + + /* + * FIXME: pwm_apply_args() should be removed when switching to + * the atomic PWM API. + */ + pwm_apply_args(pwm); + } + + pwm_config(bl->pwm, duty, period); + if (duty) + pwm_enable(bl->pwm); + else + pwm_disable(bl->pwm); +} + +static int lp8788_bl_update_status(struct backlight_device *bl_dev) +{ + struct lp8788_bl *bl = bl_get_data(bl_dev); + enum lp8788_bl_ctrl_mode mode = bl->mode; + + if (bl_dev->props.state & BL_CORE_SUSPENDED) + bl_dev->props.brightness = 0; + + if (is_brightness_ctrl_by_pwm(mode)) { + int brt = bl_dev->props.brightness; + int max = bl_dev->props.max_brightness; + + lp8788_pwm_ctrl(bl, brt, max); + } else if (is_brightness_ctrl_by_register(mode)) { + u8 brt = bl_dev->props.brightness; + + lp8788_write_byte(bl->lp, LP8788_BL_BRIGHTNESS, brt); + } + + return 0; +} + +static const struct backlight_ops lp8788_bl_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = lp8788_bl_update_status, +}; + +static int lp8788_backlight_register(struct lp8788_bl *bl) +{ + struct backlight_device *bl_dev; + struct backlight_properties props; + struct lp8788_backlight_platform_data *pdata = bl->pdata; + int init_brt; + char *name; + + props.type = BACKLIGHT_PLATFORM; + props.max_brightness = MAX_BRIGHTNESS; + + /* Initial brightness */ + if (pdata) + init_brt = min_t(int, pdata->initial_brightness, + props.max_brightness); + else + init_brt = 0; + + props.brightness = init_brt; + + /* Backlight device name */ + if (!pdata || !pdata->name) + name = DEFAULT_BL_NAME; + else + name = pdata->name; + + bl_dev = backlight_device_register(name, bl->lp->dev, bl, + &lp8788_bl_ops, &props); + if (IS_ERR(bl_dev)) + return PTR_ERR(bl_dev); + + bl->bl_dev = bl_dev; + + return 0; +} + +static void lp8788_backlight_unregister(struct lp8788_bl *bl) +{ + struct backlight_device *bl_dev = bl->bl_dev; + + backlight_device_unregister(bl_dev); +} + +static ssize_t lp8788_get_bl_ctl_mode(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct lp8788_bl *bl = dev_get_drvdata(dev); + enum lp8788_bl_ctrl_mode mode = bl->mode; + char *strmode; + + if (is_brightness_ctrl_by_pwm(mode)) + strmode = "PWM based"; + else if (is_brightness_ctrl_by_register(mode)) + strmode = "Register based"; + else + strmode = "Invalid mode"; + + return scnprintf(buf, PAGE_SIZE, "%s\n", strmode); +} + +static DEVICE_ATTR(bl_ctl_mode, S_IRUGO, lp8788_get_bl_ctl_mode, NULL); + +static struct attribute *lp8788_attributes[] = { + &dev_attr_bl_ctl_mode.attr, + NULL, +}; + +static const struct attribute_group lp8788_attr_group = { + .attrs = lp8788_attributes, +}; + +static int lp8788_backlight_probe(struct platform_device *pdev) +{ + struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent); + struct lp8788_bl *bl; + int ret; + + bl = devm_kzalloc(lp->dev, sizeof(struct lp8788_bl), GFP_KERNEL); + if (!bl) + return -ENOMEM; + + bl->lp = lp; + if (lp->pdata) + bl->pdata = lp->pdata->bl_pdata; + + platform_set_drvdata(pdev, bl); + + ret = lp8788_backlight_configure(bl); + if (ret) { + dev_err(lp->dev, "backlight config err: %d\n", ret); + goto err_dev; + } + + ret = lp8788_backlight_register(bl); + if (ret) { + dev_err(lp->dev, "register backlight err: %d\n", ret); + goto err_dev; + } + + ret = sysfs_create_group(&pdev->dev.kobj, &lp8788_attr_group); + if (ret) { + dev_err(lp->dev, "register sysfs err: %d\n", ret); + goto err_sysfs; + } + + backlight_update_status(bl->bl_dev); + + return 0; + +err_sysfs: + lp8788_backlight_unregister(bl); +err_dev: + return ret; +} + +static void lp8788_backlight_remove(struct platform_device *pdev) +{ + struct lp8788_bl *bl = platform_get_drvdata(pdev); + struct backlight_device *bl_dev = bl->bl_dev; + + bl_dev->props.brightness = 0; + backlight_update_status(bl_dev); + sysfs_remove_group(&pdev->dev.kobj, &lp8788_attr_group); + lp8788_backlight_unregister(bl); +} + +static struct platform_driver lp8788_bl_driver = { + .probe = lp8788_backlight_probe, + .remove_new = lp8788_backlight_remove, + .driver = { + .name = LP8788_DEV_BACKLIGHT, + }, +}; +module_platform_driver(lp8788_bl_driver); + +MODULE_DESCRIPTION("Texas Instruments LP8788 Backlight Driver"); +MODULE_AUTHOR("Milo Kim"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:lp8788-backlight"); diff --git a/drivers/video/backlight/ltv350qv.c b/drivers/video/backlight/ltv350qv.c new file mode 100644 index 0000000000..d54f501e42 --- /dev/null +++ b/drivers/video/backlight/ltv350qv.c @@ -0,0 +1,306 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Power control for Samsung LTV350QV Quarter VGA LCD Panel + * + * Copyright (C) 2006, 2007 Atmel Corporation + */ +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/fb.h> +#include <linux/init.h> +#include <linux/lcd.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/spi/spi.h> + +#include "ltv350qv.h" + +#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL) + +struct ltv350qv { + struct spi_device *spi; + u8 *buffer; + int power; + struct lcd_device *ld; +}; + +/* + * The power-on and power-off sequences are taken from the + * LTV350QV-F04 data sheet from Samsung. The register definitions are + * taken from the S6F2002 command list also from Samsung. + * + * There's still some voodoo going on here, but it's a lot better than + * in the first incarnation of the driver where all we had was the raw + * numbers from the initialization sequence. + */ +static int ltv350qv_write_reg(struct ltv350qv *lcd, u8 reg, u16 val) +{ + struct spi_message msg; + struct spi_transfer index_xfer = { + .len = 3, + .cs_change = 1, + }; + struct spi_transfer value_xfer = { + .len = 3, + }; + + spi_message_init(&msg); + + /* register index */ + lcd->buffer[0] = LTV_OPC_INDEX; + lcd->buffer[1] = 0x00; + lcd->buffer[2] = reg & 0x7f; + index_xfer.tx_buf = lcd->buffer; + spi_message_add_tail(&index_xfer, &msg); + + /* register value */ + lcd->buffer[4] = LTV_OPC_DATA; + lcd->buffer[5] = val >> 8; + lcd->buffer[6] = val; + value_xfer.tx_buf = lcd->buffer + 4; + spi_message_add_tail(&value_xfer, &msg); + + return spi_sync(lcd->spi, &msg); +} + +/* The comments are taken straight from the data sheet */ +static int ltv350qv_power_on(struct ltv350qv *lcd) +{ + int ret; + + /* Power On Reset Display off State */ + if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, 0x0000)) + goto err; + usleep_range(15000, 16000); + + /* Power Setting Function 1 */ + if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE)) + goto err; + if (ltv350qv_write_reg(lcd, LTV_PWRCTL2, LTV_VCOML_ENABLE)) + goto err_power1; + + /* Power Setting Function 2 */ + if (ltv350qv_write_reg(lcd, LTV_PWRCTL1, + LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5) + | LTV_SUPPLY_CURRENT(5))) + goto err_power2; + + msleep(55); + + /* Instruction Setting */ + ret = ltv350qv_write_reg(lcd, LTV_IFCTL, + LTV_NMD | LTV_REV | LTV_NL(0x1d)); + ret |= ltv350qv_write_reg(lcd, LTV_DATACTL, + LTV_DS_SAME | LTV_CHS_480 + | LTV_DF_RGB | LTV_RGB_BGR); + ret |= ltv350qv_write_reg(lcd, LTV_ENTRY_MODE, + LTV_VSPL_ACTIVE_LOW + | LTV_HSPL_ACTIVE_LOW + | LTV_DPL_SAMPLE_RISING + | LTV_EPL_ACTIVE_LOW + | LTV_SS_RIGHT_TO_LEFT); + ret |= ltv350qv_write_reg(lcd, LTV_GATECTL1, LTV_CLW(3)); + ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2, + LTV_NW_INV_1LINE | LTV_FWI(3)); + ret |= ltv350qv_write_reg(lcd, LTV_VBP, 0x000a); + ret |= ltv350qv_write_reg(lcd, LTV_HBP, 0x0021); + ret |= ltv350qv_write_reg(lcd, LTV_SOTCTL, LTV_SDT(3) | LTV_EQ(0)); + ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(0), 0x0103); + ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(1), 0x0301); + ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(2), 0x1f0f); + ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(3), 0x1f0f); + ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(4), 0x0707); + ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(5), 0x0307); + ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(6), 0x0707); + ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(7), 0x0000); + ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(8), 0x0004); + ret |= ltv350qv_write_reg(lcd, LTV_GAMMA(9), 0x0000); + if (ret) + goto err_settings; + + /* Wait more than 2 frames */ + msleep(20); + + /* Display On Sequence */ + ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1, + LTV_VCOM_DISABLE | LTV_VCOMOUT_ENABLE + | LTV_POWER_ON | LTV_DRIVE_CURRENT(5) + | LTV_SUPPLY_CURRENT(5)); + ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2, + LTV_NW_INV_1LINE | LTV_DSC | LTV_FWI(3)); + if (ret) + goto err_disp_on; + + /* Display should now be ON. Phew. */ + return 0; + +err_disp_on: + /* + * Try to recover. Error handling probably isn't very useful + * at this point, just make a best effort to switch the panel + * off. + */ + ltv350qv_write_reg(lcd, LTV_PWRCTL1, + LTV_VCOM_DISABLE | LTV_DRIVE_CURRENT(5) + | LTV_SUPPLY_CURRENT(5)); + ltv350qv_write_reg(lcd, LTV_GATECTL2, + LTV_NW_INV_1LINE | LTV_FWI(3)); +err_settings: +err_power2: +err_power1: + ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000); + usleep_range(1000, 1100); +err: + ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE); + return -EIO; +} + +static int ltv350qv_power_off(struct ltv350qv *lcd) +{ + int ret; + + /* Display Off Sequence */ + ret = ltv350qv_write_reg(lcd, LTV_PWRCTL1, + LTV_VCOM_DISABLE + | LTV_DRIVE_CURRENT(5) + | LTV_SUPPLY_CURRENT(5)); + ret |= ltv350qv_write_reg(lcd, LTV_GATECTL2, + LTV_NW_INV_1LINE | LTV_FWI(3)); + + /* Power down setting 1 */ + ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL2, 0x0000); + + /* Wait at least 1 ms */ + usleep_range(1000, 1100); + + /* Power down setting 2 */ + ret |= ltv350qv_write_reg(lcd, LTV_PWRCTL1, LTV_VCOM_DISABLE); + + /* + * No point in trying to recover here. If we can't switch the + * panel off, what are we supposed to do other than inform the + * user about the failure? + */ + if (ret) + return -EIO; + + /* Display power should now be OFF */ + return 0; +} + +static int ltv350qv_power(struct ltv350qv *lcd, int power) +{ + int ret = 0; + + if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power)) + ret = ltv350qv_power_on(lcd); + else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power)) + ret = ltv350qv_power_off(lcd); + + if (!ret) + lcd->power = power; + + return ret; +} + +static int ltv350qv_set_power(struct lcd_device *ld, int power) +{ + struct ltv350qv *lcd = lcd_get_data(ld); + + return ltv350qv_power(lcd, power); +} + +static int ltv350qv_get_power(struct lcd_device *ld) +{ + struct ltv350qv *lcd = lcd_get_data(ld); + + return lcd->power; +} + +static struct lcd_ops ltv_ops = { + .get_power = ltv350qv_get_power, + .set_power = ltv350qv_set_power, +}; + +static int ltv350qv_probe(struct spi_device *spi) +{ + struct ltv350qv *lcd; + struct lcd_device *ld; + int ret; + + lcd = devm_kzalloc(&spi->dev, sizeof(struct ltv350qv), GFP_KERNEL); + if (!lcd) + return -ENOMEM; + + lcd->spi = spi; + lcd->power = FB_BLANK_POWERDOWN; + lcd->buffer = devm_kzalloc(&spi->dev, 8, GFP_KERNEL); + if (!lcd->buffer) + return -ENOMEM; + + ld = devm_lcd_device_register(&spi->dev, "ltv350qv", &spi->dev, lcd, + <v_ops); + if (IS_ERR(ld)) + return PTR_ERR(ld); + + lcd->ld = ld; + + ret = ltv350qv_power(lcd, FB_BLANK_UNBLANK); + if (ret) + return ret; + + spi_set_drvdata(spi, lcd); + + return 0; +} + +static void ltv350qv_remove(struct spi_device *spi) +{ + struct ltv350qv *lcd = spi_get_drvdata(spi); + + ltv350qv_power(lcd, FB_BLANK_POWERDOWN); +} + +#ifdef CONFIG_PM_SLEEP +static int ltv350qv_suspend(struct device *dev) +{ + struct ltv350qv *lcd = dev_get_drvdata(dev); + + return ltv350qv_power(lcd, FB_BLANK_POWERDOWN); +} + +static int ltv350qv_resume(struct device *dev) +{ + struct ltv350qv *lcd = dev_get_drvdata(dev); + + return ltv350qv_power(lcd, FB_BLANK_UNBLANK); +} +#endif + +static SIMPLE_DEV_PM_OPS(ltv350qv_pm_ops, ltv350qv_suspend, ltv350qv_resume); + +/* Power down all displays on reboot, poweroff or halt */ +static void ltv350qv_shutdown(struct spi_device *spi) +{ + struct ltv350qv *lcd = spi_get_drvdata(spi); + + ltv350qv_power(lcd, FB_BLANK_POWERDOWN); +} + +static struct spi_driver ltv350qv_driver = { + .driver = { + .name = "ltv350qv", + .pm = <v350qv_pm_ops, + }, + + .probe = ltv350qv_probe, + .remove = ltv350qv_remove, + .shutdown = ltv350qv_shutdown, +}; + +module_spi_driver(ltv350qv_driver); + +MODULE_AUTHOR("Haavard Skinnemoen (Atmel)"); +MODULE_DESCRIPTION("Samsung LTV350QV LCD Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("spi:ltv350qv"); diff --git a/drivers/video/backlight/ltv350qv.h b/drivers/video/backlight/ltv350qv.h new file mode 100644 index 0000000000..c70890776a --- /dev/null +++ b/drivers/video/backlight/ltv350qv.h @@ -0,0 +1,92 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Register definitions for Samsung LTV350QV Quarter VGA LCD Panel + * + * Copyright (C) 2006, 2007 Atmel Corporation + */ +#ifndef __LTV350QV_H +#define __LTV350QV_H + +#define LTV_OPC_INDEX 0x74 +#define LTV_OPC_DATA 0x76 + +#define LTV_ID 0x00 /* ID Read */ +#define LTV_IFCTL 0x01 /* Display Interface Control */ +#define LTV_DATACTL 0x02 /* Display Data Control */ +#define LTV_ENTRY_MODE 0x03 /* Entry Mode */ +#define LTV_GATECTL1 0x04 /* Gate Control 1 */ +#define LTV_GATECTL2 0x05 /* Gate Control 2 */ +#define LTV_VBP 0x06 /* Vertical Back Porch */ +#define LTV_HBP 0x07 /* Horizontal Back Porch */ +#define LTV_SOTCTL 0x08 /* Source Output Timing Control */ +#define LTV_PWRCTL1 0x09 /* Power Control 1 */ +#define LTV_PWRCTL2 0x0a /* Power Control 2 */ +#define LTV_GAMMA(x) (0x10 + (x)) /* Gamma control */ + +/* Bit definitions for LTV_IFCTL */ +#define LTV_IM (1 << 15) +#define LTV_NMD (1 << 14) +#define LTV_SSMD (1 << 13) +#define LTV_REV (1 << 7) +#define LTV_NL(x) (((x) & 0x001f) << 0) + +/* Bit definitions for LTV_DATACTL */ +#define LTV_DS_SAME (0 << 12) +#define LTV_DS_D_TO_S (1 << 12) +#define LTV_DS_S_TO_D (2 << 12) +#define LTV_CHS_384 (0 << 9) +#define LTV_CHS_480 (1 << 9) +#define LTV_CHS_492 (2 << 9) +#define LTV_DF_RGB (0 << 6) +#define LTV_DF_RGBX (1 << 6) +#define LTV_DF_XRGB (2 << 6) +#define LTV_RGB_RGB (0 << 2) +#define LTV_RGB_BGR (1 << 2) +#define LTV_RGB_GRB (2 << 2) +#define LTV_RGB_RBG (3 << 2) + +/* Bit definitions for LTV_ENTRY_MODE */ +#define LTV_VSPL_ACTIVE_LOW (0 << 15) +#define LTV_VSPL_ACTIVE_HIGH (1 << 15) +#define LTV_HSPL_ACTIVE_LOW (0 << 14) +#define LTV_HSPL_ACTIVE_HIGH (1 << 14) +#define LTV_DPL_SAMPLE_RISING (0 << 13) +#define LTV_DPL_SAMPLE_FALLING (1 << 13) +#define LTV_EPL_ACTIVE_LOW (0 << 12) +#define LTV_EPL_ACTIVE_HIGH (1 << 12) +#define LTV_SS_LEFT_TO_RIGHT (0 << 8) +#define LTV_SS_RIGHT_TO_LEFT (1 << 8) +#define LTV_STB (1 << 1) + +/* Bit definitions for LTV_GATECTL1 */ +#define LTV_CLW(x) (((x) & 0x0007) << 12) +#define LTV_GAON (1 << 5) +#define LTV_SDR (1 << 3) + +/* Bit definitions for LTV_GATECTL2 */ +#define LTV_NW_INV_FRAME (0 << 14) +#define LTV_NW_INV_1LINE (1 << 14) +#define LTV_NW_INV_2LINE (2 << 14) +#define LTV_DSC (1 << 12) +#define LTV_GIF (1 << 8) +#define LTV_FHN (1 << 7) +#define LTV_FTI(x) (((x) & 0x0003) << 4) +#define LTV_FWI(x) (((x) & 0x0003) << 0) + +/* Bit definitions for LTV_SOTCTL */ +#define LTV_SDT(x) (((x) & 0x0007) << 10) +#define LTV_EQ(x) (((x) & 0x0007) << 2) + +/* Bit definitions for LTV_PWRCTL1 */ +#define LTV_VCOM_DISABLE (1 << 14) +#define LTV_VCOMOUT_ENABLE (1 << 11) +#define LTV_POWER_ON (1 << 9) +#define LTV_DRIVE_CURRENT(x) (((x) & 0x0007) << 4) /* 0=off, 5=max */ +#define LTV_SUPPLY_CURRENT(x) (((x) & 0x0007) << 0) /* 0=off, 5=max */ + +/* Bit definitions for LTV_PWRCTL2 */ +#define LTV_VCOML_ENABLE (1 << 13) +#define LTV_VCOML_VOLTAGE(x) (((x) & 0x001f) << 8) /* 0=1V, 31=-1V */ +#define LTV_VCOMH_VOLTAGE(x) (((x) & 0x001f) << 0) /* 0=3V, 31=4.5V */ + +#endif /* __LTV350QV_H */ diff --git a/drivers/video/backlight/lv5207lp.c b/drivers/video/backlight/lv5207lp.c new file mode 100644 index 0000000000..1f1d06b4e1 --- /dev/null +++ b/drivers/video/backlight/lv5207lp.c @@ -0,0 +1,153 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Sanyo LV5207LP LED Driver + * + * Copyright (C) 2013 Ideas on board SPRL + * + * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + */ + +#include <linux/backlight.h> +#include <linux/err.h> +#include <linux/fb.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/platform_data/lv5207lp.h> +#include <linux/slab.h> + +#define LV5207LP_CTRL1 0x00 +#define LV5207LP_CPSW (1 << 7) +#define LV5207LP_SCTEN (1 << 6) +#define LV5207LP_C10 (1 << 5) +#define LV5207LP_CKSW (1 << 4) +#define LV5207LP_RSW (1 << 3) +#define LV5207LP_GSW (1 << 2) +#define LV5207LP_BSW (1 << 1) +#define LV5207LP_CTRL2 0x01 +#define LV5207LP_MSW (1 << 7) +#define LV5207LP_MLED4 (1 << 6) +#define LV5207LP_RED 0x02 +#define LV5207LP_GREEN 0x03 +#define LV5207LP_BLUE 0x04 + +#define LV5207LP_MAX_BRIGHTNESS 32 + +struct lv5207lp { + struct i2c_client *client; + struct backlight_device *backlight; + struct lv5207lp_platform_data *pdata; +}; + +static int lv5207lp_write(struct lv5207lp *lv, u8 reg, u8 data) +{ + return i2c_smbus_write_byte_data(lv->client, reg, data); +} + +static int lv5207lp_backlight_update_status(struct backlight_device *backlight) +{ + struct lv5207lp *lv = bl_get_data(backlight); + int brightness = backlight_get_brightness(backlight); + + if (brightness) { + lv5207lp_write(lv, LV5207LP_CTRL1, + LV5207LP_CPSW | LV5207LP_C10 | LV5207LP_CKSW); + lv5207lp_write(lv, LV5207LP_CTRL2, + LV5207LP_MSW | LV5207LP_MLED4 | + (brightness - 1)); + } else { + lv5207lp_write(lv, LV5207LP_CTRL1, 0); + lv5207lp_write(lv, LV5207LP_CTRL2, 0); + } + + return 0; +} + +static int lv5207lp_backlight_check_fb(struct backlight_device *backlight, + struct fb_info *info) +{ + struct lv5207lp *lv = bl_get_data(backlight); + + return !lv->pdata->dev || lv->pdata->dev == info->device; +} + +static const struct backlight_ops lv5207lp_backlight_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = lv5207lp_backlight_update_status, + .check_fb = lv5207lp_backlight_check_fb, +}; + +static int lv5207lp_probe(struct i2c_client *client) +{ + struct lv5207lp_platform_data *pdata = dev_get_platdata(&client->dev); + struct backlight_device *backlight; + struct backlight_properties props; + struct lv5207lp *lv; + + if (pdata == NULL) { + dev_err(&client->dev, "No platform data supplied\n"); + return -EINVAL; + } + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_warn(&client->dev, + "I2C adapter doesn't support I2C_FUNC_SMBUS_BYTE\n"); + return -EIO; + } + + lv = devm_kzalloc(&client->dev, sizeof(*lv), GFP_KERNEL); + if (!lv) + return -ENOMEM; + + lv->client = client; + lv->pdata = pdata; + + memset(&props, 0, sizeof(props)); + props.type = BACKLIGHT_RAW; + props.max_brightness = min_t(unsigned int, pdata->max_value, + LV5207LP_MAX_BRIGHTNESS); + props.brightness = clamp_t(unsigned int, pdata->def_value, 0, + props.max_brightness); + + backlight = devm_backlight_device_register(&client->dev, + dev_name(&client->dev), &lv->client->dev, + lv, &lv5207lp_backlight_ops, &props); + if (IS_ERR(backlight)) { + dev_err(&client->dev, "failed to register backlight\n"); + return PTR_ERR(backlight); + } + + backlight_update_status(backlight); + i2c_set_clientdata(client, backlight); + + return 0; +} + +static void lv5207lp_remove(struct i2c_client *client) +{ + struct backlight_device *backlight = i2c_get_clientdata(client); + + backlight->props.brightness = 0; + backlight_update_status(backlight); +} + +static const struct i2c_device_id lv5207lp_ids[] = { + { "lv5207lp", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lv5207lp_ids); + +static struct i2c_driver lv5207lp_driver = { + .driver = { + .name = "lv5207lp", + }, + .probe = lv5207lp_probe, + .remove = lv5207lp_remove, + .id_table = lv5207lp_ids, +}; + +module_i2c_driver(lv5207lp_driver); + +MODULE_DESCRIPTION("Sanyo LV5207LP Backlight Driver"); +MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/backlight/max8925_bl.c b/drivers/video/backlight/max8925_bl.c new file mode 100644 index 0000000000..e607ec6fd4 --- /dev/null +++ b/drivers/video/backlight/max8925_bl.c @@ -0,0 +1,197 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Backlight driver for Maxim MAX8925 + * + * Copyright (C) 2009 Marvell International Ltd. + * Haojian Zhuang <haojian.zhuang@marvell.com> + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/fb.h> +#include <linux/i2c.h> +#include <linux/backlight.h> +#include <linux/mfd/max8925.h> +#include <linux/slab.h> +#include <linux/module.h> + +#define MAX_BRIGHTNESS (0xff) +#define MIN_BRIGHTNESS (0) + +#define LWX_FREQ(x) (((x - 601) / 100) & 0x7) + +struct max8925_backlight_data { + struct max8925_chip *chip; + + int current_brightness; + int reg_mode_cntl; + int reg_cntl; +}; + +static int max8925_backlight_set(struct backlight_device *bl, int brightness) +{ + struct max8925_backlight_data *data = bl_get_data(bl); + struct max8925_chip *chip = data->chip; + unsigned char value; + int ret; + + if (brightness > MAX_BRIGHTNESS) + value = MAX_BRIGHTNESS; + else + value = brightness; + + ret = max8925_reg_write(chip->i2c, data->reg_cntl, value); + if (ret < 0) + goto out; + + if (!data->current_brightness && brightness) + /* enable WLED output */ + ret = max8925_set_bits(chip->i2c, data->reg_mode_cntl, 1, 1); + else if (!brightness) + /* disable WLED output */ + ret = max8925_set_bits(chip->i2c, data->reg_mode_cntl, 1, 0); + if (ret < 0) + goto out; + dev_dbg(chip->dev, "set brightness %d\n", value); + data->current_brightness = value; + return 0; +out: + dev_dbg(chip->dev, "set brightness %d failure with return value:%d\n", + value, ret); + return ret; +} + +static int max8925_backlight_update_status(struct backlight_device *bl) +{ + return max8925_backlight_set(bl, backlight_get_brightness(bl)); +} + +static int max8925_backlight_get_brightness(struct backlight_device *bl) +{ + struct max8925_backlight_data *data = bl_get_data(bl); + struct max8925_chip *chip = data->chip; + int ret; + + ret = max8925_reg_read(chip->i2c, data->reg_cntl); + if (ret < 0) + return -EINVAL; + data->current_brightness = ret; + dev_dbg(chip->dev, "get brightness %d\n", data->current_brightness); + return ret; +} + +static const struct backlight_ops max8925_backlight_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = max8925_backlight_update_status, + .get_brightness = max8925_backlight_get_brightness, +}; + +static void max8925_backlight_dt_init(struct platform_device *pdev) +{ + struct device_node *nproot = pdev->dev.parent->of_node, *np; + struct max8925_backlight_pdata *pdata; + u32 val; + + if (!nproot || !IS_ENABLED(CONFIG_OF)) + return; + + pdata = devm_kzalloc(&pdev->dev, + sizeof(struct max8925_backlight_pdata), + GFP_KERNEL); + if (!pdata) + return; + + np = of_get_child_by_name(nproot, "backlight"); + if (!np) { + dev_err(&pdev->dev, "failed to find backlight node\n"); + return; + } + + if (!of_property_read_u32(np, "maxim,max8925-dual-string", &val)) + pdata->dual_string = val; + + of_node_put(np); + + pdev->dev.platform_data = pdata; +} + +static int max8925_backlight_probe(struct platform_device *pdev) +{ + struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent); + struct max8925_backlight_pdata *pdata; + struct max8925_backlight_data *data; + struct backlight_device *bl; + struct backlight_properties props; + struct resource *res; + unsigned char value; + int ret = 0; + + data = devm_kzalloc(&pdev->dev, sizeof(struct max8925_backlight_data), + GFP_KERNEL); + if (data == NULL) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_REG, 0); + if (!res) { + dev_err(&pdev->dev, "No REG resource for mode control!\n"); + return -ENXIO; + } + data->reg_mode_cntl = res->start; + res = platform_get_resource(pdev, IORESOURCE_REG, 1); + if (!res) { + dev_err(&pdev->dev, "No REG resource for control!\n"); + return -ENXIO; + } + data->reg_cntl = res->start; + + data->chip = chip; + data->current_brightness = 0; + + memset(&props, 0, sizeof(struct backlight_properties)); + props.type = BACKLIGHT_RAW; + props.max_brightness = MAX_BRIGHTNESS; + bl = devm_backlight_device_register(&pdev->dev, "max8925-backlight", + &pdev->dev, data, + &max8925_backlight_ops, &props); + if (IS_ERR(bl)) { + dev_err(&pdev->dev, "failed to register backlight\n"); + return PTR_ERR(bl); + } + bl->props.brightness = MAX_BRIGHTNESS; + + platform_set_drvdata(pdev, bl); + + value = 0; + if (!pdev->dev.platform_data) + max8925_backlight_dt_init(pdev); + + pdata = pdev->dev.platform_data; + if (pdata) { + if (pdata->lxw_scl) + value |= (1 << 7); + if (pdata->lxw_freq) + value |= (LWX_FREQ(pdata->lxw_freq) << 4); + if (pdata->dual_string) + value |= (1 << 1); + } + ret = max8925_set_bits(chip->i2c, data->reg_mode_cntl, 0xfe, value); + if (ret < 0) + return ret; + backlight_update_status(bl); + return 0; +} + +static struct platform_driver max8925_backlight_driver = { + .driver = { + .name = "max8925-backlight", + }, + .probe = max8925_backlight_probe, +}; + +module_platform_driver(max8925_backlight_driver); + +MODULE_DESCRIPTION("Backlight Driver for Maxim MAX8925"); +MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:max8925-backlight"); diff --git a/drivers/video/backlight/mt6370-backlight.c b/drivers/video/backlight/mt6370-backlight.c new file mode 100644 index 0000000000..94422c9564 --- /dev/null +++ b/drivers/video/backlight/mt6370-backlight.c @@ -0,0 +1,349 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2022 Richtek Technology Corp. + * + * Author: ChiaEn Wu <chiaen_wu@richtek.com> + */ + +#include <linux/backlight.h> +#include <linux/bitfield.h> +#include <linux/bits.h> +#include <linux/gpio/consumer.h> +#include <linux/kernel.h> +#include <linux/minmax.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/regmap.h> + +#define MT6370_REG_DEV_INFO 0x100 +#define MT6370_REG_BL_EN 0x1A0 +#define MT6370_REG_BL_BSTCTRL 0x1A1 +#define MT6370_REG_BL_PWM 0x1A2 +#define MT6370_REG_BL_DIM2 0x1A4 + +#define MT6370_VENID_MASK GENMASK(7, 4) +#define MT6370_BL_EXT_EN_MASK BIT(7) +#define MT6370_BL_EN_MASK BIT(6) +#define MT6370_BL_CODE_MASK BIT(0) +#define MT6370_BL_CH_MASK GENMASK(5, 2) +#define MT6370_BL_CH_SHIFT 2 +#define MT6370_BL_DIM2_COMMON_MASK GENMASK(2, 0) +#define MT6370_BL_DIM2_COMMON_SHIFT 3 +#define MT6370_BL_DIM2_6372_MASK GENMASK(5, 0) +#define MT6370_BL_DIM2_6372_SHIFT 6 +#define MT6370_BL_PWM_EN_MASK BIT(7) +#define MT6370_BL_PWM_HYS_EN_MASK BIT(2) +#define MT6370_BL_PWM_HYS_SEL_MASK GENMASK(1, 0) +#define MT6370_BL_OVP_EN_MASK BIT(7) +#define MT6370_BL_OVP_SEL_MASK GENMASK(6, 5) +#define MT6370_BL_OVP_SEL_SHIFT 5 +#define MT6370_BL_OC_EN_MASK BIT(3) +#define MT6370_BL_OC_SEL_MASK GENMASK(2, 1) +#define MT6370_BL_OC_SEL_SHIFT 1 + +#define MT6370_BL_PWM_HYS_TH_MIN_STEP 1 +#define MT6370_BL_PWM_HYS_TH_MAX_STEP 64 +#define MT6370_BL_OVP_MIN_UV 17000000 +#define MT6370_BL_OVP_MAX_UV 29000000 +#define MT6370_BL_OVP_STEP_UV 4000000 +#define MT6370_BL_OCP_MIN_UA 900000 +#define MT6370_BL_OCP_MAX_UA 1800000 +#define MT6370_BL_OCP_STEP_UA 300000 +#define MT6370_BL_MAX_COMMON_BRIGHTNESS 2048 +#define MT6370_BL_MAX_6372_BRIGHTNESS 16384 +#define MT6370_BL_MAX_CH 15 + +enum { + MT6370_VID_COMMON = 1, + MT6370_VID_6372, +}; + +struct mt6370_priv { + u8 dim2_mask; + u8 dim2_shift; + int def_max_brightness; + struct backlight_device *bl; + struct device *dev; + struct gpio_desc *enable_gpio; + struct regmap *regmap; +}; + +static int mt6370_bl_update_status(struct backlight_device *bl_dev) +{ + struct mt6370_priv *priv = bl_get_data(bl_dev); + int brightness = backlight_get_brightness(bl_dev); + unsigned int enable_val; + u8 brightness_val[2]; + int ret; + + if (brightness) { + brightness_val[0] = (brightness - 1) & priv->dim2_mask; + brightness_val[1] = (brightness - 1) >> priv->dim2_shift; + + ret = regmap_raw_write(priv->regmap, MT6370_REG_BL_DIM2, + brightness_val, sizeof(brightness_val)); + if (ret) + return ret; + } + + gpiod_set_value(priv->enable_gpio, !!brightness); + + enable_val = brightness ? MT6370_BL_EN_MASK : 0; + return regmap_update_bits(priv->regmap, MT6370_REG_BL_EN, + MT6370_BL_EN_MASK, enable_val); +} + +static int mt6370_bl_get_brightness(struct backlight_device *bl_dev) +{ + struct mt6370_priv *priv = bl_get_data(bl_dev); + unsigned int enable; + u8 brightness_val[2]; + int brightness, ret; + + ret = regmap_read(priv->regmap, MT6370_REG_BL_EN, &enable); + if (ret) + return ret; + + if (!(enable & MT6370_BL_EN_MASK)) + return 0; + + ret = regmap_raw_read(priv->regmap, MT6370_REG_BL_DIM2, + brightness_val, sizeof(brightness_val)); + if (ret) + return ret; + + brightness = brightness_val[1] << priv->dim2_shift; + brightness += brightness_val[0] & priv->dim2_mask; + + return brightness + 1; +} + +static const struct backlight_ops mt6370_bl_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = mt6370_bl_update_status, + .get_brightness = mt6370_bl_get_brightness, +}; + +static int mt6370_init_backlight_properties(struct mt6370_priv *priv, + struct backlight_properties *props) +{ + struct device *dev = priv->dev; + u8 prop_val; + u32 brightness, ovp_uV, ocp_uA; + unsigned int mask, val; + int ret; + + /* Vendor optional properties */ + val = 0; + if (device_property_read_bool(dev, "mediatek,bled-pwm-enable")) + val |= MT6370_BL_PWM_EN_MASK; + + if (device_property_read_bool(dev, "mediatek,bled-pwm-hys-enable")) + val |= MT6370_BL_PWM_HYS_EN_MASK; + + ret = device_property_read_u8(dev, + "mediatek,bled-pwm-hys-input-th-steps", + &prop_val); + if (!ret) { + prop_val = clamp_val(prop_val, + MT6370_BL_PWM_HYS_TH_MIN_STEP, + MT6370_BL_PWM_HYS_TH_MAX_STEP); + prop_val = prop_val <= 1 ? 0 : + prop_val <= 4 ? 1 : + prop_val <= 16 ? 2 : 3; + val |= prop_val; + } + + ret = regmap_update_bits(priv->regmap, MT6370_REG_BL_PWM, + val, val); + if (ret) + return ret; + + val = 0; + if (device_property_read_bool(dev, "mediatek,bled-ovp-shutdown")) + val |= MT6370_BL_OVP_EN_MASK; + + ret = device_property_read_u32(dev, "mediatek,bled-ovp-microvolt", + &ovp_uV); + if (!ret) { + ovp_uV = clamp_val(ovp_uV, MT6370_BL_OVP_MIN_UV, + MT6370_BL_OVP_MAX_UV); + ovp_uV = DIV_ROUND_UP(ovp_uV - MT6370_BL_OVP_MIN_UV, + MT6370_BL_OVP_STEP_UV); + val |= ovp_uV << MT6370_BL_OVP_SEL_SHIFT; + } + + if (device_property_read_bool(dev, "mediatek,bled-ocp-shutdown")) + val |= MT6370_BL_OC_EN_MASK; + + ret = device_property_read_u32(dev, "mediatek,bled-ocp-microamp", + &ocp_uA); + if (!ret) { + ocp_uA = clamp_val(ocp_uA, MT6370_BL_OCP_MIN_UA, + MT6370_BL_OCP_MAX_UA); + ocp_uA = DIV_ROUND_UP(ocp_uA - MT6370_BL_OCP_MIN_UA, + MT6370_BL_OCP_STEP_UA); + val |= ocp_uA << MT6370_BL_OC_SEL_SHIFT; + } + + ret = regmap_update_bits(priv->regmap, MT6370_REG_BL_BSTCTRL, + val, val); + if (ret) + return ret; + + /* Common properties */ + ret = device_property_read_u32(dev, "max-brightness", &brightness); + if (ret) + brightness = priv->def_max_brightness; + + props->max_brightness = min_t(u32, brightness, priv->def_max_brightness); + + ret = device_property_read_u32(dev, "default-brightness", &brightness); + if (ret) + brightness = props->max_brightness; + + props->brightness = min_t(u32, brightness, props->max_brightness); + + val = 0; + if (device_property_read_bool(dev, "mediatek,bled-exponential-mode-enable")) { + val |= MT6370_BL_CODE_MASK; + props->scale = BACKLIGHT_SCALE_NON_LINEAR; + } else + props->scale = BACKLIGHT_SCALE_LINEAR; + + ret = device_property_read_u8(dev, "mediatek,bled-channel-use", + &prop_val); + if (ret) { + dev_err(dev, "mediatek,bled-channel-use DT property missing\n"); + return ret; + } + + if (!prop_val || prop_val > MT6370_BL_MAX_CH) { + dev_err(dev, + "No channel specified or over than upper bound (%d)\n", + prop_val); + return -EINVAL; + } + + mask = MT6370_BL_EXT_EN_MASK | MT6370_BL_CH_MASK; + val |= prop_val << MT6370_BL_CH_SHIFT; + + if (priv->enable_gpio) + val |= MT6370_BL_EXT_EN_MASK; + + return regmap_update_bits(priv->regmap, MT6370_REG_BL_EN, mask, val); +} + +static int mt6370_check_vendor_info(struct mt6370_priv *priv) +{ + /* + * Because MT6372 uses 14 bits to control the brightness, + * MT6370 and MT6371 use 11 bits. This function is used + * to check the vendor's ID and set the relative hardware + * mask, shift and default maximum brightness value that + * should be used. + */ + unsigned int dev_info, hw_vid, of_vid; + int ret; + + ret = regmap_read(priv->regmap, MT6370_REG_DEV_INFO, &dev_info); + if (ret) + return ret; + + of_vid = (uintptr_t)device_get_match_data(priv->dev); + hw_vid = FIELD_GET(MT6370_VENID_MASK, dev_info); + hw_vid = (hw_vid == 0x9 || hw_vid == 0xb) ? MT6370_VID_6372 : MT6370_VID_COMMON; + if (hw_vid != of_vid) + return dev_err_probe(priv->dev, -EINVAL, + "Buggy DT, wrong compatible string\n"); + + if (hw_vid == MT6370_VID_6372) { + priv->dim2_mask = MT6370_BL_DIM2_6372_MASK; + priv->dim2_shift = MT6370_BL_DIM2_6372_SHIFT; + priv->def_max_brightness = MT6370_BL_MAX_6372_BRIGHTNESS; + } else { + priv->dim2_mask = MT6370_BL_DIM2_COMMON_MASK; + priv->dim2_shift = MT6370_BL_DIM2_COMMON_SHIFT; + priv->def_max_brightness = MT6370_BL_MAX_COMMON_BRIGHTNESS; + } + + return 0; +} + +static int mt6370_bl_probe(struct platform_device *pdev) +{ + struct backlight_properties props = { + .type = BACKLIGHT_RAW, + }; + struct device *dev = &pdev->dev; + struct mt6370_priv *priv; + int ret; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = dev; + + priv->regmap = dev_get_regmap(dev->parent, NULL); + if (!priv->regmap) + return dev_err_probe(dev, -ENODEV, "Failed to get regmap\n"); + + ret = mt6370_check_vendor_info(priv); + if (ret) + return dev_err_probe(dev, ret, "Failed to check vendor info\n"); + + priv->enable_gpio = devm_gpiod_get_optional(dev, "enable", + GPIOD_OUT_HIGH); + if (IS_ERR(priv->enable_gpio)) + return dev_err_probe(dev, PTR_ERR(priv->enable_gpio), + "Failed to get 'enable' gpio\n"); + + ret = mt6370_init_backlight_properties(priv, &props); + if (ret) + return dev_err_probe(dev, ret, + "Failed to init backlight properties\n"); + + priv->bl = devm_backlight_device_register(dev, pdev->name, dev, priv, + &mt6370_bl_ops, &props); + if (IS_ERR(priv->bl)) + return dev_err_probe(dev, PTR_ERR(priv->bl), + "Failed to register backlight\n"); + + backlight_update_status(priv->bl); + platform_set_drvdata(pdev, priv); + + return 0; +} + +static void mt6370_bl_remove(struct platform_device *pdev) +{ + struct mt6370_priv *priv = platform_get_drvdata(pdev); + struct backlight_device *bl_dev = priv->bl; + + bl_dev->props.brightness = 0; + backlight_update_status(priv->bl); +} + +static const struct of_device_id mt6370_bl_of_match[] = { + { .compatible = "mediatek,mt6370-backlight", .data = (void *)MT6370_VID_COMMON }, + { .compatible = "mediatek,mt6372-backlight", .data = (void *)MT6370_VID_6372 }, + {} +}; +MODULE_DEVICE_TABLE(of, mt6370_bl_of_match); + +static struct platform_driver mt6370_bl_driver = { + .driver = { + .name = "mt6370-backlight", + .of_match_table = mt6370_bl_of_match, + }, + .probe = mt6370_bl_probe, + .remove_new = mt6370_bl_remove, +}; +module_platform_driver(mt6370_bl_driver); + +MODULE_AUTHOR("ChiaEn Wu <chiaen_wu@richtek.com>"); +MODULE_DESCRIPTION("MediaTek MT6370 Backlight Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/video/backlight/omap1_bl.c b/drivers/video/backlight/omap1_bl.c new file mode 100644 index 0000000000..69a49384b3 --- /dev/null +++ b/drivers/video/backlight/omap1_bl.c @@ -0,0 +1,175 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Backlight driver for OMAP based boards. + * + * Copyright (c) 2006 Andrzej Zaborowski <balrog@zabor.org> + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/fb.h> +#include <linux/backlight.h> +#include <linux/slab.h> +#include <linux/platform_data/omap1_bl.h> + +#include <linux/soc/ti/omap1-io.h> +#include <linux/soc/ti/omap1-mux.h> + +#define OMAPBL_MAX_INTENSITY 0xff + +struct omap_backlight { + int powermode; + int current_intensity; + + struct device *dev; + struct omap_backlight_config *pdata; +}; + +static inline void omapbl_send_intensity(int intensity) +{ + omap_writeb(intensity, OMAP_PWL_ENABLE); +} + +static inline void omapbl_send_enable(int enable) +{ + omap_writeb(enable, OMAP_PWL_CLK_ENABLE); +} + +static void omapbl_blank(struct omap_backlight *bl, int mode) +{ + if (bl->pdata->set_power) + bl->pdata->set_power(bl->dev, mode); + + switch (mode) { + case FB_BLANK_NORMAL: + case FB_BLANK_VSYNC_SUSPEND: + case FB_BLANK_HSYNC_SUSPEND: + case FB_BLANK_POWERDOWN: + omapbl_send_intensity(0); + omapbl_send_enable(0); + break; + + case FB_BLANK_UNBLANK: + omapbl_send_intensity(bl->current_intensity); + omapbl_send_enable(1); + break; + } +} + +#ifdef CONFIG_PM_SLEEP +static int omapbl_suspend(struct device *dev) +{ + struct backlight_device *bl_dev = dev_get_drvdata(dev); + struct omap_backlight *bl = bl_get_data(bl_dev); + + omapbl_blank(bl, FB_BLANK_POWERDOWN); + return 0; +} + +static int omapbl_resume(struct device *dev) +{ + struct backlight_device *bl_dev = dev_get_drvdata(dev); + struct omap_backlight *bl = bl_get_data(bl_dev); + + omapbl_blank(bl, bl->powermode); + return 0; +} +#endif + +static int omapbl_set_power(struct backlight_device *dev, int state) +{ + struct omap_backlight *bl = bl_get_data(dev); + + omapbl_blank(bl, state); + bl->powermode = state; + + return 0; +} + +static int omapbl_update_status(struct backlight_device *dev) +{ + struct omap_backlight *bl = bl_get_data(dev); + + if (bl->current_intensity != dev->props.brightness) { + if (bl->powermode == FB_BLANK_UNBLANK) + omapbl_send_intensity(dev->props.brightness); + bl->current_intensity = dev->props.brightness; + } + + if (dev->props.fb_blank != bl->powermode) + omapbl_set_power(dev, dev->props.fb_blank); + + return 0; +} + +static int omapbl_get_intensity(struct backlight_device *dev) +{ + struct omap_backlight *bl = bl_get_data(dev); + + return bl->current_intensity; +} + +static const struct backlight_ops omapbl_ops = { + .get_brightness = omapbl_get_intensity, + .update_status = omapbl_update_status, +}; + +static int omapbl_probe(struct platform_device *pdev) +{ + struct backlight_properties props; + struct backlight_device *dev; + struct omap_backlight *bl; + struct omap_backlight_config *pdata = dev_get_platdata(&pdev->dev); + + if (!pdata) + return -ENXIO; + + bl = devm_kzalloc(&pdev->dev, sizeof(struct omap_backlight), + GFP_KERNEL); + if (unlikely(!bl)) + return -ENOMEM; + + memset(&props, 0, sizeof(struct backlight_properties)); + props.type = BACKLIGHT_RAW; + props.max_brightness = OMAPBL_MAX_INTENSITY; + dev = devm_backlight_device_register(&pdev->dev, "omap-bl", &pdev->dev, + bl, &omapbl_ops, &props); + if (IS_ERR(dev)) + return PTR_ERR(dev); + + bl->powermode = FB_BLANK_POWERDOWN; + bl->current_intensity = 0; + + bl->pdata = pdata; + bl->dev = &pdev->dev; + + platform_set_drvdata(pdev, dev); + + omap_cfg_reg(PWL); /* Conflicts with UART3 */ + + dev->props.fb_blank = FB_BLANK_UNBLANK; + dev->props.brightness = pdata->default_intensity; + omapbl_update_status(dev); + + dev_info(&pdev->dev, "OMAP LCD backlight initialised\n"); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(omapbl_pm_ops, omapbl_suspend, omapbl_resume); + +static struct platform_driver omapbl_driver = { + .probe = omapbl_probe, + .driver = { + .name = "omap-bl", + .pm = &omapbl_pm_ops, + }, +}; + +module_platform_driver(omapbl_driver); + +MODULE_AUTHOR("Andrzej Zaborowski <balrog@zabor.org>"); +MODULE_DESCRIPTION("OMAP LCD Backlight driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/backlight/otm3225a.c b/drivers/video/backlight/otm3225a.c new file mode 100644 index 0000000000..2472e2167a --- /dev/null +++ b/drivers/video/backlight/otm3225a.c @@ -0,0 +1,252 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Driver for ORISE Technology OTM3225A SOC for TFT LCD + * Copyright (C) 2017, EETS GmbH, Felix Brack <fb@ltec.ch> + * + * This driver implements a lcd device for the ORISE OTM3225A display + * controller. The control interface to the display is SPI and the display's + * memory is updated over the 16-bit RGB interface. + * The main source of information for writing this driver was provided by the + * OTM3225A datasheet from ORISE Technology. Some information arise from the + * ILI9328 datasheet from ILITEK as well as from the datasheets and sample code + * provided by Crystalfontz America Inc. who sells the CFAF240320A-032T, a 3.2" + * TFT LC display using the OTM3225A controller. + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/lcd.h> +#include <linux/module.h> +#include <linux/spi/spi.h> + +#define OTM3225A_INDEX_REG 0x70 +#define OTM3225A_DATA_REG 0x72 + +/* instruction register list */ +#define DRIVER_OUTPUT_CTRL_1 0x01 +#define DRIVER_WAVEFORM_CTRL 0x02 +#define ENTRY_MODE 0x03 +#define SCALING_CTRL 0x04 +#define DISPLAY_CTRL_1 0x07 +#define DISPLAY_CTRL_2 0x08 +#define DISPLAY_CTRL_3 0x09 +#define FRAME_CYCLE_CTRL 0x0A +#define EXT_DISP_IFACE_CTRL_1 0x0C +#define FRAME_MAKER_POS 0x0D +#define EXT_DISP_IFACE_CTRL_2 0x0F +#define POWER_CTRL_1 0x10 +#define POWER_CTRL_2 0x11 +#define POWER_CTRL_3 0x12 +#define POWER_CTRL_4 0x13 +#define GRAM_ADDR_HORIZ_SET 0x20 +#define GRAM_ADDR_VERT_SET 0x21 +#define GRAM_READ_WRITE 0x22 +#define POWER_CTRL_7 0x29 +#define FRAME_RATE_CTRL 0x2B +#define GAMMA_CTRL_1 0x30 +#define GAMMA_CTRL_2 0x31 +#define GAMMA_CTRL_3 0x32 +#define GAMMA_CTRL_4 0x35 +#define GAMMA_CTRL_5 0x36 +#define GAMMA_CTRL_6 0x37 +#define GAMMA_CTRL_7 0x38 +#define GAMMA_CTRL_8 0x39 +#define GAMMA_CTRL_9 0x3C +#define GAMMA_CTRL_10 0x3D +#define WINDOW_HORIZ_RAM_START 0x50 +#define WINDOW_HORIZ_RAM_END 0x51 +#define WINDOW_VERT_RAM_START 0x52 +#define WINDOW_VERT_RAM_END 0x53 +#define DRIVER_OUTPUT_CTRL_2 0x60 +#define BASE_IMG_DISPLAY_CTRL 0x61 +#define VERT_SCROLL_CTRL 0x6A +#define PD1_DISPLAY_POS 0x80 +#define PD1_RAM_START 0x81 +#define PD1_RAM_END 0x82 +#define PD2_DISPLAY_POS 0x83 +#define PD2_RAM_START 0x84 +#define PD2_RAM_END 0x85 +#define PANEL_IFACE_CTRL_1 0x90 +#define PANEL_IFACE_CTRL_2 0x92 +#define PANEL_IFACE_CTRL_4 0x95 +#define PANEL_IFACE_CTRL_5 0x97 + +struct otm3225a_data { + struct spi_device *spi; + struct lcd_device *ld; + int power; +}; + +struct otm3225a_spi_instruction { + unsigned char reg; /* register to write */ + unsigned short value; /* data to write to 'reg' */ + unsigned short delay; /* delay in ms after write */ +}; + +static struct otm3225a_spi_instruction display_init[] = { + { DRIVER_OUTPUT_CTRL_1, 0x0000, 0 }, + { DRIVER_WAVEFORM_CTRL, 0x0700, 0 }, + { ENTRY_MODE, 0x50A0, 0 }, + { SCALING_CTRL, 0x0000, 0 }, + { DISPLAY_CTRL_2, 0x0606, 0 }, + { DISPLAY_CTRL_3, 0x0000, 0 }, + { FRAME_CYCLE_CTRL, 0x0000, 0 }, + { EXT_DISP_IFACE_CTRL_1, 0x0000, 0 }, + { FRAME_MAKER_POS, 0x0000, 0 }, + { EXT_DISP_IFACE_CTRL_2, 0x0002, 0 }, + { POWER_CTRL_2, 0x0007, 0 }, + { POWER_CTRL_3, 0x0000, 0 }, + { POWER_CTRL_4, 0x0000, 200 }, + { DISPLAY_CTRL_1, 0x0101, 0 }, + { POWER_CTRL_1, 0x12B0, 0 }, + { POWER_CTRL_2, 0x0007, 0 }, + { POWER_CTRL_3, 0x01BB, 50 }, + { POWER_CTRL_4, 0x0013, 0 }, + { POWER_CTRL_7, 0x0010, 50 }, + { GAMMA_CTRL_1, 0x000A, 0 }, + { GAMMA_CTRL_2, 0x1326, 0 }, + { GAMMA_CTRL_3, 0x0A29, 0 }, + { GAMMA_CTRL_4, 0x0A0A, 0 }, + { GAMMA_CTRL_5, 0x1E03, 0 }, + { GAMMA_CTRL_6, 0x031E, 0 }, + { GAMMA_CTRL_7, 0x0706, 0 }, + { GAMMA_CTRL_8, 0x0303, 0 }, + { GAMMA_CTRL_9, 0x010E, 0 }, + { GAMMA_CTRL_10, 0x040E, 0 }, + { WINDOW_HORIZ_RAM_START, 0x0000, 0 }, + { WINDOW_HORIZ_RAM_END, 0x00EF, 0 }, + { WINDOW_VERT_RAM_START, 0x0000, 0 }, + { WINDOW_VERT_RAM_END, 0x013F, 0 }, + { DRIVER_OUTPUT_CTRL_2, 0x2700, 0 }, + { BASE_IMG_DISPLAY_CTRL, 0x0001, 0 }, + { VERT_SCROLL_CTRL, 0x0000, 0 }, + { PD1_DISPLAY_POS, 0x0000, 0 }, + { PD1_RAM_START, 0x0000, 0 }, + { PD1_RAM_END, 0x0000, 0 }, + { PD2_DISPLAY_POS, 0x0000, 0 }, + { PD2_RAM_START, 0x0000, 0 }, + { PD2_RAM_END, 0x0000, 0 }, + { PANEL_IFACE_CTRL_1, 0x0010, 0 }, + { PANEL_IFACE_CTRL_2, 0x0000, 0 }, + { PANEL_IFACE_CTRL_4, 0x0210, 0 }, + { PANEL_IFACE_CTRL_5, 0x0000, 0 }, + { DISPLAY_CTRL_1, 0x0133, 0 }, +}; + +static struct otm3225a_spi_instruction display_enable_rgb_interface[] = { + { ENTRY_MODE, 0x1080, 0 }, + { GRAM_ADDR_HORIZ_SET, 0x0000, 0 }, + { GRAM_ADDR_VERT_SET, 0x0000, 0 }, + { EXT_DISP_IFACE_CTRL_1, 0x0111, 500 }, +}; + +static struct otm3225a_spi_instruction display_off[] = { + { DISPLAY_CTRL_1, 0x0131, 100 }, + { DISPLAY_CTRL_1, 0x0130, 100 }, + { DISPLAY_CTRL_1, 0x0100, 0 }, + { POWER_CTRL_1, 0x0280, 0 }, + { POWER_CTRL_3, 0x018B, 0 }, +}; + +static struct otm3225a_spi_instruction display_on[] = { + { POWER_CTRL_1, 0x1280, 0 }, + { DISPLAY_CTRL_1, 0x0101, 100 }, + { DISPLAY_CTRL_1, 0x0121, 0 }, + { DISPLAY_CTRL_1, 0x0123, 100 }, + { DISPLAY_CTRL_1, 0x0133, 10 }, +}; + +static void otm3225a_write(struct spi_device *spi, + struct otm3225a_spi_instruction *instruction, + unsigned int count) +{ + unsigned char buf[3]; + + while (count--) { + /* address register using index register */ + buf[0] = OTM3225A_INDEX_REG; + buf[1] = 0x00; + buf[2] = instruction->reg; + spi_write(spi, buf, 3); + + /* write data to addressed register */ + buf[0] = OTM3225A_DATA_REG; + buf[1] = (instruction->value >> 8) & 0xff; + buf[2] = instruction->value & 0xff; + spi_write(spi, buf, 3); + + /* execute delay if any */ + if (instruction->delay) + msleep(instruction->delay); + instruction++; + } +} + +static int otm3225a_set_power(struct lcd_device *ld, int power) +{ + struct otm3225a_data *dd = lcd_get_data(ld); + + if (power == dd->power) + return 0; + + if (power > FB_BLANK_UNBLANK) + otm3225a_write(dd->spi, display_off, ARRAY_SIZE(display_off)); + else + otm3225a_write(dd->spi, display_on, ARRAY_SIZE(display_on)); + dd->power = power; + + return 0; +} + +static int otm3225a_get_power(struct lcd_device *ld) +{ + struct otm3225a_data *dd = lcd_get_data(ld); + + return dd->power; +} + +static struct lcd_ops otm3225a_ops = { + .set_power = otm3225a_set_power, + .get_power = otm3225a_get_power, +}; + +static int otm3225a_probe(struct spi_device *spi) +{ + struct otm3225a_data *dd; + struct lcd_device *ld; + struct device *dev = &spi->dev; + + dd = devm_kzalloc(dev, sizeof(struct otm3225a_data), GFP_KERNEL); + if (dd == NULL) + return -ENOMEM; + + ld = devm_lcd_device_register(dev, dev_name(dev), dev, dd, + &otm3225a_ops); + if (IS_ERR(ld)) + return PTR_ERR(ld); + + dd->spi = spi; + dd->ld = ld; + dev_set_drvdata(dev, dd); + + dev_info(dev, "Initializing and switching to RGB interface"); + otm3225a_write(spi, display_init, ARRAY_SIZE(display_init)); + otm3225a_write(spi, display_enable_rgb_interface, + ARRAY_SIZE(display_enable_rgb_interface)); + return 0; +} + +static struct spi_driver otm3225a_driver = { + .driver = { + .name = "otm3225a", + .owner = THIS_MODULE, + }, + .probe = otm3225a_probe, +}; + +module_spi_driver(otm3225a_driver); + +MODULE_AUTHOR("Felix Brack <fb@ltec.ch>"); +MODULE_DESCRIPTION("OTM3225A TFT LCD driver"); +MODULE_VERSION("1.0.0"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/video/backlight/pandora_bl.c b/drivers/video/backlight/pandora_bl.c new file mode 100644 index 0000000000..f946470ce9 --- /dev/null +++ b/drivers/video/backlight/pandora_bl.c @@ -0,0 +1,162 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Backlight driver for Pandora handheld. + * Pandora uses TWL4030 PWM0 -> TPS61161 combo for control backlight. + * Based on pwm_bl.c + * + * Copyright 2009,2012 Gražvydas Ignotas <notasas@gmail.com> + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/fb.h> +#include <linux/backlight.h> +#include <linux/mfd/twl.h> +#include <linux/err.h> + +#define TWL_PWM0_ON 0x00 +#define TWL_PWM0_OFF 0x01 + +#define TWL_INTBR_GPBR1 0x0c +#define TWL_INTBR_PMBR1 0x0d + +#define TWL_PMBR1_PWM0_MUXMASK 0x0c +#define TWL_PMBR1_PWM0 0x04 +#define PWM0_CLK_ENABLE BIT(0) +#define PWM0_ENABLE BIT(2) + +/* range accepted by hardware */ +#define MIN_VALUE 9 +#define MAX_VALUE 63 +#define MAX_USER_VALUE (MAX_VALUE - MIN_VALUE) + +struct pandora_private { + unsigned old_state; +#define PANDORABL_WAS_OFF 1 +}; + +static int pandora_backlight_update_status(struct backlight_device *bl) +{ + int brightness = bl->props.brightness; + struct pandora_private *priv = bl_get_data(bl); + u8 r; + + if (bl->props.power != FB_BLANK_UNBLANK) + brightness = 0; + if (bl->props.state & BL_CORE_FBBLANK) + brightness = 0; + if (bl->props.state & BL_CORE_SUSPENDED) + brightness = 0; + + if ((unsigned int)brightness > MAX_USER_VALUE) + brightness = MAX_USER_VALUE; + + if (brightness == 0) { + if (priv->old_state == PANDORABL_WAS_OFF) + goto done; + + /* first disable PWM0 output, then clock */ + twl_i2c_read_u8(TWL4030_MODULE_INTBR, &r, TWL_INTBR_GPBR1); + r &= ~PWM0_ENABLE; + twl_i2c_write_u8(TWL4030_MODULE_INTBR, r, TWL_INTBR_GPBR1); + r &= ~PWM0_CLK_ENABLE; + twl_i2c_write_u8(TWL4030_MODULE_INTBR, r, TWL_INTBR_GPBR1); + + goto done; + } + + if (priv->old_state == PANDORABL_WAS_OFF) { + /* + * set PWM duty cycle to max. TPS61161 seems to use this + * to calibrate it's PWM sensitivity when it starts. + */ + twl_i2c_write_u8(TWL_MODULE_PWM, MAX_VALUE, TWL_PWM0_OFF); + + /* first enable clock, then PWM0 out */ + twl_i2c_read_u8(TWL4030_MODULE_INTBR, &r, TWL_INTBR_GPBR1); + r &= ~PWM0_ENABLE; + r |= PWM0_CLK_ENABLE; + twl_i2c_write_u8(TWL4030_MODULE_INTBR, r, TWL_INTBR_GPBR1); + r |= PWM0_ENABLE; + twl_i2c_write_u8(TWL4030_MODULE_INTBR, r, TWL_INTBR_GPBR1); + + /* + * TI made it very easy to enable digital control, so easy that + * it often triggers unintentionally and disabes PWM control, + * so wait until 1 wire mode detection window ends. + */ + usleep_range(2000, 10000); + } + + twl_i2c_write_u8(TWL_MODULE_PWM, MIN_VALUE + brightness, TWL_PWM0_OFF); + +done: + if (brightness != 0) + priv->old_state = 0; + else + priv->old_state = PANDORABL_WAS_OFF; + + return 0; +} + +static const struct backlight_ops pandora_backlight_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = pandora_backlight_update_status, +}; + +static int pandora_backlight_probe(struct platform_device *pdev) +{ + struct backlight_properties props; + struct backlight_device *bl; + struct pandora_private *priv; + u8 r; + + priv = devm_kmalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) { + dev_err(&pdev->dev, "failed to allocate driver private data\n"); + return -ENOMEM; + } + + memset(&props, 0, sizeof(props)); + props.max_brightness = MAX_USER_VALUE; + props.type = BACKLIGHT_RAW; + bl = devm_backlight_device_register(&pdev->dev, pdev->name, &pdev->dev, + priv, &pandora_backlight_ops, &props); + if (IS_ERR(bl)) { + dev_err(&pdev->dev, "failed to register backlight\n"); + return PTR_ERR(bl); + } + + platform_set_drvdata(pdev, bl); + + /* 64 cycle period, ON position 0 */ + twl_i2c_write_u8(TWL_MODULE_PWM, 0x80, TWL_PWM0_ON); + + priv->old_state = PANDORABL_WAS_OFF; + bl->props.brightness = MAX_USER_VALUE; + backlight_update_status(bl); + + /* enable PWM function in pin mux */ + twl_i2c_read_u8(TWL4030_MODULE_INTBR, &r, TWL_INTBR_PMBR1); + r &= ~TWL_PMBR1_PWM0_MUXMASK; + r |= TWL_PMBR1_PWM0; + twl_i2c_write_u8(TWL4030_MODULE_INTBR, r, TWL_INTBR_PMBR1); + + return 0; +} + +static struct platform_driver pandora_backlight_driver = { + .driver = { + .name = "pandora-backlight", + }, + .probe = pandora_backlight_probe, +}; + +module_platform_driver(pandora_backlight_driver); + +MODULE_AUTHOR("Gražvydas Ignotas <notasas@gmail.com>"); +MODULE_DESCRIPTION("Pandora Backlight Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pandora-backlight"); diff --git a/drivers/video/backlight/pcf50633-backlight.c b/drivers/video/backlight/pcf50633-backlight.c new file mode 100644 index 0000000000..540dd3380c --- /dev/null +++ b/drivers/video/backlight/pcf50633-backlight.c @@ -0,0 +1,155 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de> + * PCF50633 backlight device driver + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/platform_device.h> + +#include <linux/backlight.h> +#include <linux/fb.h> + +#include <linux/mfd/pcf50633/core.h> +#include <linux/mfd/pcf50633/backlight.h> + +struct pcf50633_bl { + struct pcf50633 *pcf; + struct backlight_device *bl; + + unsigned int brightness; + unsigned int brightness_limit; +}; + +/* + * pcf50633_bl_set_brightness_limit + * + * Update the brightness limit for the pc50633 backlight. The actual brightness + * will not go above the limit. This is useful to limit power drain for example + * on low battery. + * + * @dev: Pointer to a pcf50633 device + * @limit: The brightness limit. Valid values are 0-63 + */ +int pcf50633_bl_set_brightness_limit(struct pcf50633 *pcf, unsigned int limit) +{ + struct pcf50633_bl *pcf_bl = platform_get_drvdata(pcf->bl_pdev); + + if (!pcf_bl) + return -ENODEV; + + pcf_bl->brightness_limit = limit & 0x3f; + backlight_update_status(pcf_bl->bl); + + return 0; +} + +static int pcf50633_bl_update_status(struct backlight_device *bl) +{ + struct pcf50633_bl *pcf_bl = bl_get_data(bl); + unsigned int new_brightness; + + + if (bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK) || + bl->props.power != FB_BLANK_UNBLANK) + new_brightness = 0; + else if (bl->props.brightness < pcf_bl->brightness_limit) + new_brightness = bl->props.brightness; + else + new_brightness = pcf_bl->brightness_limit; + + + if (pcf_bl->brightness == new_brightness) + return 0; + + if (new_brightness) { + pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDOUT, + new_brightness); + if (!pcf_bl->brightness) + pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDENA, 1); + } else { + pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDENA, 0); + } + + pcf_bl->brightness = new_brightness; + + return 0; +} + +static int pcf50633_bl_get_brightness(struct backlight_device *bl) +{ + struct pcf50633_bl *pcf_bl = bl_get_data(bl); + + return pcf_bl->brightness; +} + +static const struct backlight_ops pcf50633_bl_ops = { + .get_brightness = pcf50633_bl_get_brightness, + .update_status = pcf50633_bl_update_status, + .options = BL_CORE_SUSPENDRESUME, +}; + +static int pcf50633_bl_probe(struct platform_device *pdev) +{ + struct pcf50633_bl *pcf_bl; + struct device *parent = pdev->dev.parent; + struct pcf50633_platform_data *pcf50633_data = dev_get_platdata(parent); + struct pcf50633_bl_platform_data *pdata = pcf50633_data->backlight_data; + struct backlight_properties bl_props; + + pcf_bl = devm_kzalloc(&pdev->dev, sizeof(*pcf_bl), GFP_KERNEL); + if (!pcf_bl) + return -ENOMEM; + + memset(&bl_props, 0, sizeof(bl_props)); + bl_props.type = BACKLIGHT_RAW; + bl_props.max_brightness = 0x3f; + bl_props.power = FB_BLANK_UNBLANK; + + if (pdata) { + bl_props.brightness = pdata->default_brightness; + pcf_bl->brightness_limit = pdata->default_brightness_limit; + } else { + bl_props.brightness = 0x3f; + pcf_bl->brightness_limit = 0x3f; + } + + pcf_bl->pcf = dev_to_pcf50633(pdev->dev.parent); + + pcf_bl->bl = devm_backlight_device_register(&pdev->dev, pdev->name, + &pdev->dev, pcf_bl, + &pcf50633_bl_ops, &bl_props); + + if (IS_ERR(pcf_bl->bl)) + return PTR_ERR(pcf_bl->bl); + + platform_set_drvdata(pdev, pcf_bl); + + pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDDIM, pdata->ramp_time); + + /* + * Should be different from bl_props.brightness, so we do not exit + * update_status early the first time it's called + */ + pcf_bl->brightness = pcf_bl->bl->props.brightness + 1; + + backlight_update_status(pcf_bl->bl); + + return 0; +} + +static struct platform_driver pcf50633_bl_driver = { + .probe = pcf50633_bl_probe, + .driver = { + .name = "pcf50633-backlight", + }, +}; + +module_platform_driver(pcf50633_bl_driver); + +MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); +MODULE_DESCRIPTION("PCF50633 backlight driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pcf50633-backlight"); diff --git a/drivers/video/backlight/platform_lcd.c b/drivers/video/backlight/platform_lcd.c new file mode 100644 index 0000000000..dc37494baf --- /dev/null +++ b/drivers/video/backlight/platform_lcd.c @@ -0,0 +1,147 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* drivers/video/backlight/platform_lcd.c + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Generic platform-device LCD power control interface. +*/ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/fb.h> +#include <linux/backlight.h> +#include <linux/lcd.h> +#include <linux/slab.h> + +#include <video/platform_lcd.h> + +struct platform_lcd { + struct device *us; + struct lcd_device *lcd; + struct plat_lcd_data *pdata; + + unsigned int power; + unsigned int suspended:1; +}; + +static inline struct platform_lcd *to_our_lcd(struct lcd_device *lcd) +{ + return lcd_get_data(lcd); +} + +static int platform_lcd_get_power(struct lcd_device *lcd) +{ + struct platform_lcd *plcd = to_our_lcd(lcd); + + return plcd->power; +} + +static int platform_lcd_set_power(struct lcd_device *lcd, int power) +{ + struct platform_lcd *plcd = to_our_lcd(lcd); + int lcd_power = 1; + + if (power == FB_BLANK_POWERDOWN || plcd->suspended) + lcd_power = 0; + + plcd->pdata->set_power(plcd->pdata, lcd_power); + plcd->power = power; + + return 0; +} + +static int platform_lcd_match(struct lcd_device *lcd, struct fb_info *info) +{ + struct platform_lcd *plcd = to_our_lcd(lcd); + struct plat_lcd_data *pdata = plcd->pdata; + + if (pdata->match_fb) + return pdata->match_fb(pdata, info); + + return plcd->us->parent == info->device; +} + +static struct lcd_ops platform_lcd_ops = { + .get_power = platform_lcd_get_power, + .set_power = platform_lcd_set_power, + .check_fb = platform_lcd_match, +}; + +static int platform_lcd_probe(struct platform_device *pdev) +{ + struct plat_lcd_data *pdata; + struct platform_lcd *plcd; + struct device *dev = &pdev->dev; + int err; + + pdata = dev_get_platdata(&pdev->dev); + if (!pdata) { + dev_err(dev, "no platform data supplied\n"); + return -EINVAL; + } + + if (pdata->probe) { + err = pdata->probe(pdata); + if (err) + return err; + } + + plcd = devm_kzalloc(&pdev->dev, sizeof(struct platform_lcd), + GFP_KERNEL); + if (!plcd) + return -ENOMEM; + + plcd->us = dev; + plcd->pdata = pdata; + plcd->lcd = devm_lcd_device_register(&pdev->dev, dev_name(dev), dev, + plcd, &platform_lcd_ops); + if (IS_ERR(plcd->lcd)) { + dev_err(dev, "cannot register lcd device\n"); + return PTR_ERR(plcd->lcd); + } + + platform_set_drvdata(pdev, plcd); + platform_lcd_set_power(plcd->lcd, FB_BLANK_NORMAL); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int platform_lcd_suspend(struct device *dev) +{ + struct platform_lcd *plcd = dev_get_drvdata(dev); + + plcd->suspended = 1; + platform_lcd_set_power(plcd->lcd, plcd->power); + + return 0; +} + +static int platform_lcd_resume(struct device *dev) +{ + struct platform_lcd *plcd = dev_get_drvdata(dev); + + plcd->suspended = 0; + platform_lcd_set_power(plcd->lcd, plcd->power); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(platform_lcd_pm_ops, platform_lcd_suspend, + platform_lcd_resume); + +static struct platform_driver platform_lcd_driver = { + .driver = { + .name = "platform-lcd", + .pm = &platform_lcd_pm_ops, + }, + .probe = platform_lcd_probe, +}; + +module_platform_driver(platform_lcd_driver); + +MODULE_AUTHOR("Ben Dooks <ben-linux@fluff.org>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:platform-lcd"); diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c new file mode 100644 index 0000000000..289bd9ce4d --- /dev/null +++ b/drivers/video/backlight/pwm_bl.c @@ -0,0 +1,718 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Simple PWM based backlight control, board code has to setup + * 1) pin configuration so PWM waveforms can output + * 2) platform_data being correctly configured + */ + +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/fb.h> +#include <linux/backlight.h> +#include <linux/err.h> +#include <linux/pwm.h> +#include <linux/pwm_backlight.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> + +struct pwm_bl_data { + struct pwm_device *pwm; + struct device *dev; + unsigned int lth_brightness; + unsigned int *levels; + bool enabled; + struct regulator *power_supply; + struct gpio_desc *enable_gpio; + unsigned int scale; + unsigned int post_pwm_on_delay; + unsigned int pwm_off_delay; + int (*notify)(struct device *, + int brightness); + void (*notify_after)(struct device *, + int brightness); + int (*check_fb)(struct device *, struct fb_info *); + void (*exit)(struct device *); +}; + +static void pwm_backlight_power_on(struct pwm_bl_data *pb) +{ + int err; + + if (pb->enabled) + return; + + if (pb->power_supply) { + err = regulator_enable(pb->power_supply); + if (err < 0) + dev_err(pb->dev, "failed to enable power supply\n"); + } + + if (pb->post_pwm_on_delay) + msleep(pb->post_pwm_on_delay); + + gpiod_set_value_cansleep(pb->enable_gpio, 1); + + pb->enabled = true; +} + +static void pwm_backlight_power_off(struct pwm_bl_data *pb) +{ + if (!pb->enabled) + return; + + gpiod_set_value_cansleep(pb->enable_gpio, 0); + + if (pb->pwm_off_delay) + msleep(pb->pwm_off_delay); + + if (pb->power_supply) + regulator_disable(pb->power_supply); + pb->enabled = false; +} + +static int compute_duty_cycle(struct pwm_bl_data *pb, int brightness, struct pwm_state *state) +{ + unsigned int lth = pb->lth_brightness; + u64 duty_cycle; + + if (pb->levels) + duty_cycle = pb->levels[brightness]; + else + duty_cycle = brightness; + + duty_cycle *= state->period - lth; + do_div(duty_cycle, pb->scale); + + return duty_cycle + lth; +} + +static int pwm_backlight_update_status(struct backlight_device *bl) +{ + struct pwm_bl_data *pb = bl_get_data(bl); + int brightness = backlight_get_brightness(bl); + struct pwm_state state; + + if (pb->notify) + brightness = pb->notify(pb->dev, brightness); + + if (brightness > 0) { + pwm_get_state(pb->pwm, &state); + state.duty_cycle = compute_duty_cycle(pb, brightness, &state); + state.enabled = true; + pwm_apply_state(pb->pwm, &state); + + pwm_backlight_power_on(pb); + } else { + pwm_backlight_power_off(pb); + + pwm_get_state(pb->pwm, &state); + state.duty_cycle = 0; + /* + * We cannot assume a disabled PWM to drive its output to the + * inactive state. If we have an enable GPIO and/or a regulator + * we assume that this isn't relevant and we can disable the PWM + * to save power. If however there is neither an enable GPIO nor + * a regulator keep the PWM on be sure to get a constant + * inactive output. + */ + state.enabled = !pb->power_supply && !pb->enable_gpio; + pwm_apply_state(pb->pwm, &state); + } + + if (pb->notify_after) + pb->notify_after(pb->dev, brightness); + + return 0; +} + +static int pwm_backlight_check_fb(struct backlight_device *bl, + struct fb_info *info) +{ + struct pwm_bl_data *pb = bl_get_data(bl); + + return !pb->check_fb || pb->check_fb(pb->dev, info); +} + +static const struct backlight_ops pwm_backlight_ops = { + .update_status = pwm_backlight_update_status, + .check_fb = pwm_backlight_check_fb, +}; + +#ifdef CONFIG_OF +#define PWM_LUMINANCE_SHIFT 16 +#define PWM_LUMINANCE_SCALE (1 << PWM_LUMINANCE_SHIFT) /* luminance scale */ + +/* + * CIE lightness to PWM conversion. + * + * The CIE 1931 lightness formula is what actually describes how we perceive + * light: + * Y = (L* / 903.3) if L* ≤ 8 + * Y = ((L* + 16) / 116)^3 if L* > 8 + * + * Where Y is the luminance, the amount of light coming out of the screen, and + * is a number between 0.0 and 1.0; and L* is the lightness, how bright a human + * perceives the screen to be, and is a number between 0 and 100. + * + * The following function does the fixed point maths needed to implement the + * above formula. + */ +static u64 cie1931(unsigned int lightness) +{ + u64 retval; + + /* + * @lightness is given as a number between 0 and 1, expressed + * as a fixed-point number in scale + * PWM_LUMINANCE_SCALE. Convert to a percentage, still + * expressed as a fixed-point number, so the above formulas + * can be applied. + */ + lightness *= 100; + if (lightness <= (8 * PWM_LUMINANCE_SCALE)) { + retval = DIV_ROUND_CLOSEST(lightness * 10, 9033); + } else { + retval = (lightness + (16 * PWM_LUMINANCE_SCALE)) / 116; + retval *= retval * retval; + retval += 1ULL << (2*PWM_LUMINANCE_SHIFT - 1); + retval >>= 2*PWM_LUMINANCE_SHIFT; + } + + return retval; +} + +/* + * Create a default correction table for PWM values to create linear brightness + * for LED based backlights using the CIE1931 algorithm. + */ +static +int pwm_backlight_brightness_default(struct device *dev, + struct platform_pwm_backlight_data *data, + unsigned int period) +{ + unsigned int i; + u64 retval; + + /* + * Once we have 4096 levels there's little point going much higher... + * neither interactive sliders nor animation benefits from having + * more values in the table. + */ + data->max_brightness = + min((int)DIV_ROUND_UP(period, fls(period)), 4096); + + data->levels = devm_kcalloc(dev, data->max_brightness, + sizeof(*data->levels), GFP_KERNEL); + if (!data->levels) + return -ENOMEM; + + /* Fill the table using the cie1931 algorithm */ + for (i = 0; i < data->max_brightness; i++) { + retval = cie1931((i * PWM_LUMINANCE_SCALE) / + data->max_brightness) * period; + retval = DIV_ROUND_CLOSEST_ULL(retval, PWM_LUMINANCE_SCALE); + if (retval > UINT_MAX) + return -EINVAL; + data->levels[i] = (unsigned int)retval; + } + + data->dft_brightness = data->max_brightness / 2; + data->max_brightness--; + + return 0; +} + +static int pwm_backlight_parse_dt(struct device *dev, + struct platform_pwm_backlight_data *data) +{ + struct device_node *node = dev->of_node; + unsigned int num_levels; + unsigned int num_steps = 0; + struct property *prop; + unsigned int *table; + int length; + u32 value; + int ret; + + if (!node) + return -ENODEV; + + memset(data, 0, sizeof(*data)); + + /* + * These values are optional and set as 0 by default, the out values + * are modified only if a valid u32 value can be decoded. + */ + of_property_read_u32(node, "post-pwm-on-delay-ms", + &data->post_pwm_on_delay); + of_property_read_u32(node, "pwm-off-delay-ms", &data->pwm_off_delay); + + /* + * Determine the number of brightness levels, if this property is not + * set a default table of brightness levels will be used. + */ + prop = of_find_property(node, "brightness-levels", &length); + if (!prop) + return 0; + + num_levels = length / sizeof(u32); + + /* read brightness levels from DT property */ + if (num_levels > 0) { + data->levels = devm_kcalloc(dev, num_levels, + sizeof(*data->levels), GFP_KERNEL); + if (!data->levels) + return -ENOMEM; + + ret = of_property_read_u32_array(node, "brightness-levels", + data->levels, + num_levels); + if (ret < 0) + return ret; + + ret = of_property_read_u32(node, "default-brightness-level", + &value); + if (ret < 0) + return ret; + + data->dft_brightness = value; + + /* + * This property is optional, if is set enables linear + * interpolation between each of the values of brightness levels + * and creates a new pre-computed table. + */ + of_property_read_u32(node, "num-interpolated-steps", + &num_steps); + + /* + * Make sure that there is at least two entries in the + * brightness-levels table, otherwise we can't interpolate + * between two points. + */ + if (num_steps) { + unsigned int num_input_levels = num_levels; + unsigned int i; + u32 x1, x2, x, dx; + u32 y1, y2; + s64 dy; + + if (num_input_levels < 2) { + dev_err(dev, "can't interpolate\n"); + return -EINVAL; + } + + /* + * Recalculate the number of brightness levels, now + * taking in consideration the number of interpolated + * steps between two levels. + */ + num_levels = (num_input_levels - 1) * num_steps + 1; + dev_dbg(dev, "new number of brightness levels: %d\n", + num_levels); + + /* + * Create a new table of brightness levels with all the + * interpolated steps. + */ + table = devm_kcalloc(dev, num_levels, sizeof(*table), + GFP_KERNEL); + if (!table) + return -ENOMEM; + /* + * Fill the interpolated table[x] = y + * by draw lines between each (x1, y1) to (x2, y2). + */ + dx = num_steps; + for (i = 0; i < num_input_levels - 1; i++) { + x1 = i * dx; + x2 = x1 + dx; + y1 = data->levels[i]; + y2 = data->levels[i + 1]; + dy = (s64)y2 - y1; + + for (x = x1; x < x2; x++) { + table[x] = y1 + + div_s64(dy * (x - x1), dx); + } + } + /* Fill in the last point, since no line starts here. */ + table[x2] = y2; + + /* + * As we use interpolation lets remove current + * brightness levels table and replace for the + * new interpolated table. + */ + devm_kfree(dev, data->levels); + data->levels = table; + } + + data->max_brightness = num_levels - 1; + } + + return 0; +} + +static const struct of_device_id pwm_backlight_of_match[] = { + { .compatible = "pwm-backlight" }, + { } +}; + +MODULE_DEVICE_TABLE(of, pwm_backlight_of_match); +#else +static int pwm_backlight_parse_dt(struct device *dev, + struct platform_pwm_backlight_data *data) +{ + return -ENODEV; +} + +static +int pwm_backlight_brightness_default(struct device *dev, + struct platform_pwm_backlight_data *data, + unsigned int period) +{ + return -ENODEV; +} +#endif + +static bool pwm_backlight_is_linear(struct platform_pwm_backlight_data *data) +{ + unsigned int nlevels = data->max_brightness + 1; + unsigned int min_val = data->levels[0]; + unsigned int max_val = data->levels[nlevels - 1]; + /* + * Multiplying by 128 means that even in pathological cases such + * as (max_val - min_val) == nlevels the error at max_val is less + * than 1%. + */ + unsigned int slope = (128 * (max_val - min_val)) / nlevels; + unsigned int margin = (max_val - min_val) / 20; /* 5% */ + int i; + + for (i = 1; i < nlevels; i++) { + unsigned int linear_value = min_val + ((i * slope) / 128); + unsigned int delta = abs(linear_value - data->levels[i]); + + if (delta > margin) + return false; + } + + return true; +} + +static int pwm_backlight_initial_power_state(const struct pwm_bl_data *pb) +{ + struct device_node *node = pb->dev->of_node; + bool active = true; + + /* + * If the enable GPIO is present, observable (either as input + * or output) and off then the backlight is not currently active. + * */ + if (pb->enable_gpio && gpiod_get_value_cansleep(pb->enable_gpio) == 0) + active = false; + + if (pb->power_supply && !regulator_is_enabled(pb->power_supply)) + active = false; + + if (!pwm_is_enabled(pb->pwm)) + active = false; + + /* + * Synchronize the enable_gpio with the observed state of the + * hardware. + */ + gpiod_direction_output(pb->enable_gpio, active); + + /* + * Do not change pb->enabled here! pb->enabled essentially + * tells us if we own one of the regulator's use counts and + * right now we do not. + */ + + /* Not booted with device tree or no phandle link to the node */ + if (!node || !node->phandle) + return FB_BLANK_UNBLANK; + + /* + * If the driver is probed from the device tree and there is a + * phandle link pointing to the backlight node, it is safe to + * assume that another driver will enable the backlight at the + * appropriate time. Therefore, if it is disabled, keep it so. + */ + return active ? FB_BLANK_UNBLANK: FB_BLANK_POWERDOWN; +} + +static int pwm_backlight_probe(struct platform_device *pdev) +{ + struct platform_pwm_backlight_data *data = dev_get_platdata(&pdev->dev); + struct platform_pwm_backlight_data defdata; + struct backlight_properties props; + struct backlight_device *bl; + struct pwm_bl_data *pb; + struct pwm_state state; + unsigned int i; + int ret; + + if (!data) { + ret = pwm_backlight_parse_dt(&pdev->dev, &defdata); + if (ret < 0) { + dev_err(&pdev->dev, "failed to find platform data\n"); + return ret; + } + + data = &defdata; + } + + if (data->init) { + ret = data->init(&pdev->dev); + if (ret < 0) + return ret; + } + + pb = devm_kzalloc(&pdev->dev, sizeof(*pb), GFP_KERNEL); + if (!pb) { + ret = -ENOMEM; + goto err_alloc; + } + + pb->notify = data->notify; + pb->notify_after = data->notify_after; + pb->check_fb = data->check_fb; + pb->exit = data->exit; + pb->dev = &pdev->dev; + pb->enabled = false; + pb->post_pwm_on_delay = data->post_pwm_on_delay; + pb->pwm_off_delay = data->pwm_off_delay; + + pb->enable_gpio = devm_gpiod_get_optional(&pdev->dev, "enable", + GPIOD_ASIS); + if (IS_ERR(pb->enable_gpio)) { + ret = PTR_ERR(pb->enable_gpio); + goto err_alloc; + } + + pb->power_supply = devm_regulator_get_optional(&pdev->dev, "power"); + if (IS_ERR(pb->power_supply)) { + ret = PTR_ERR(pb->power_supply); + if (ret == -ENODEV) + pb->power_supply = NULL; + else + goto err_alloc; + } + + pb->pwm = devm_pwm_get(&pdev->dev, NULL); + if (IS_ERR(pb->pwm)) { + ret = PTR_ERR(pb->pwm); + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "unable to request PWM\n"); + goto err_alloc; + } + + dev_dbg(&pdev->dev, "got pwm for backlight\n"); + + /* Sync up PWM state. */ + pwm_init_state(pb->pwm, &state); + + /* + * The DT case will set the pwm_period_ns field to 0 and store the + * period, parsed from the DT, in the PWM device. For the non-DT case, + * set the period from platform data if it has not already been set + * via the PWM lookup table. + */ + if (!state.period && (data->pwm_period_ns > 0)) + state.period = data->pwm_period_ns; + + ret = pwm_apply_state(pb->pwm, &state); + if (ret) { + dev_err(&pdev->dev, "failed to apply initial PWM state: %d\n", + ret); + goto err_alloc; + } + + memset(&props, 0, sizeof(struct backlight_properties)); + + if (data->levels) { + pb->levels = data->levels; + + /* + * For the DT case, only when brightness levels is defined + * data->levels is filled. For the non-DT case, data->levels + * can come from platform data, however is not usual. + */ + for (i = 0; i <= data->max_brightness; i++) + if (data->levels[i] > pb->scale) + pb->scale = data->levels[i]; + + if (pwm_backlight_is_linear(data)) + props.scale = BACKLIGHT_SCALE_LINEAR; + else + props.scale = BACKLIGHT_SCALE_NON_LINEAR; + } else if (!data->max_brightness) { + /* + * If no brightness levels are provided and max_brightness is + * not set, use the default brightness table. For the DT case, + * max_brightness is set to 0 when brightness levels is not + * specified. For the non-DT case, max_brightness is usually + * set to some value. + */ + + /* Get the PWM period (in nanoseconds) */ + pwm_get_state(pb->pwm, &state); + + ret = pwm_backlight_brightness_default(&pdev->dev, data, + state.period); + if (ret < 0) { + dev_err(&pdev->dev, + "failed to setup default brightness table\n"); + goto err_alloc; + } + + for (i = 0; i <= data->max_brightness; i++) { + if (data->levels[i] > pb->scale) + pb->scale = data->levels[i]; + + pb->levels = data->levels; + } + + props.scale = BACKLIGHT_SCALE_NON_LINEAR; + } else { + /* + * That only happens for the non-DT case, where platform data + * sets the max_brightness value. + */ + pb->scale = data->max_brightness; + } + + pb->lth_brightness = data->lth_brightness * (div_u64(state.period, + pb->scale)); + + props.type = BACKLIGHT_RAW; + props.max_brightness = data->max_brightness; + bl = backlight_device_register(dev_name(&pdev->dev), &pdev->dev, pb, + &pwm_backlight_ops, &props); + if (IS_ERR(bl)) { + dev_err(&pdev->dev, "failed to register backlight\n"); + ret = PTR_ERR(bl); + goto err_alloc; + } + + if (data->dft_brightness > data->max_brightness) { + dev_warn(&pdev->dev, + "invalid default brightness level: %u, using %u\n", + data->dft_brightness, data->max_brightness); + data->dft_brightness = data->max_brightness; + } + + bl->props.brightness = data->dft_brightness; + bl->props.power = pwm_backlight_initial_power_state(pb); + backlight_update_status(bl); + + platform_set_drvdata(pdev, bl); + return 0; + +err_alloc: + if (data->exit) + data->exit(&pdev->dev); + return ret; +} + +static void pwm_backlight_remove(struct platform_device *pdev) +{ + struct backlight_device *bl = platform_get_drvdata(pdev); + struct pwm_bl_data *pb = bl_get_data(bl); + struct pwm_state state; + + backlight_device_unregister(bl); + pwm_backlight_power_off(pb); + pwm_get_state(pb->pwm, &state); + state.duty_cycle = 0; + state.enabled = false; + pwm_apply_state(pb->pwm, &state); + + if (pb->exit) + pb->exit(&pdev->dev); +} + +static void pwm_backlight_shutdown(struct platform_device *pdev) +{ + struct backlight_device *bl = platform_get_drvdata(pdev); + struct pwm_bl_data *pb = bl_get_data(bl); + struct pwm_state state; + + pwm_backlight_power_off(pb); + pwm_get_state(pb->pwm, &state); + state.duty_cycle = 0; + state.enabled = false; + pwm_apply_state(pb->pwm, &state); +} + +#ifdef CONFIG_PM_SLEEP +static int pwm_backlight_suspend(struct device *dev) +{ + struct backlight_device *bl = dev_get_drvdata(dev); + struct pwm_bl_data *pb = bl_get_data(bl); + struct pwm_state state; + + if (pb->notify) + pb->notify(pb->dev, 0); + + pwm_backlight_power_off(pb); + + /* + * Note that disabling the PWM doesn't guarantee that the output stays + * at its inactive state. However without the PWM disabled, the PWM + * driver refuses to suspend. So disable here even though this might + * enable the backlight on poorly designed boards. + */ + pwm_get_state(pb->pwm, &state); + state.duty_cycle = 0; + state.enabled = false; + pwm_apply_state(pb->pwm, &state); + + if (pb->notify_after) + pb->notify_after(pb->dev, 0); + + return 0; +} + +static int pwm_backlight_resume(struct device *dev) +{ + struct backlight_device *bl = dev_get_drvdata(dev); + + backlight_update_status(bl); + + return 0; +} +#endif + +static const struct dev_pm_ops pwm_backlight_pm_ops = { +#ifdef CONFIG_PM_SLEEP + .suspend = pwm_backlight_suspend, + .resume = pwm_backlight_resume, + .poweroff = pwm_backlight_suspend, + .restore = pwm_backlight_resume, +#endif +}; + +static struct platform_driver pwm_backlight_driver = { + .driver = { + .name = "pwm-backlight", + .pm = &pwm_backlight_pm_ops, + .of_match_table = of_match_ptr(pwm_backlight_of_match), + }, + .probe = pwm_backlight_probe, + .remove_new = pwm_backlight_remove, + .shutdown = pwm_backlight_shutdown, +}; + +module_platform_driver(pwm_backlight_driver); + +MODULE_DESCRIPTION("PWM based Backlight Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:pwm-backlight"); diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c new file mode 100644 index 0000000000..10129095a4 --- /dev/null +++ b/drivers/video/backlight/qcom-wled.c @@ -0,0 +1,1754 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright (c) 2015, Sony Mobile Communications, AB. + */ + +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/ktime.h> +#include <linux/kernel.h> +#include <linux/backlight.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +/* From DT binding */ +#define WLED_MAX_STRINGS 4 +#define MOD_A 0 +#define MOD_B 1 + +#define WLED_DEFAULT_BRIGHTNESS 2048 +#define WLED_SOFT_START_DLY_US 10000 +#define WLED3_SINK_REG_BRIGHT_MAX 0xFFF +#define WLED5_SINK_REG_BRIGHT_MAX_12B 0xFFF +#define WLED5_SINK_REG_BRIGHT_MAX_15B 0x7FFF + +/* WLED3/WLED4 control registers */ +#define WLED3_CTRL_REG_FAULT_STATUS 0x08 +#define WLED3_CTRL_REG_ILIM_FAULT_BIT BIT(0) +#define WLED3_CTRL_REG_OVP_FAULT_BIT BIT(1) +#define WLED4_CTRL_REG_SC_FAULT_BIT BIT(2) +#define WLED5_CTRL_REG_OVP_PRE_ALARM_BIT BIT(4) + +#define WLED3_CTRL_REG_INT_RT_STS 0x10 +#define WLED3_CTRL_REG_OVP_FAULT_STATUS BIT(1) + +#define WLED3_CTRL_REG_MOD_EN 0x46 +#define WLED3_CTRL_REG_MOD_EN_MASK BIT(7) +#define WLED3_CTRL_REG_MOD_EN_SHIFT 7 + +#define WLED3_CTRL_REG_FEEDBACK_CONTROL 0x48 + +#define WLED3_CTRL_REG_FREQ 0x4c +#define WLED3_CTRL_REG_FREQ_MASK GENMASK(3, 0) + +#define WLED3_CTRL_REG_OVP 0x4d +#define WLED3_CTRL_REG_OVP_MASK GENMASK(1, 0) +#define WLED5_CTRL_REG_OVP_MASK GENMASK(3, 0) + +#define WLED3_CTRL_REG_ILIMIT 0x4e +#define WLED3_CTRL_REG_ILIMIT_MASK GENMASK(2, 0) + +/* WLED3/WLED4 sink registers */ +#define WLED3_SINK_REG_SYNC 0x47 +#define WLED3_SINK_REG_SYNC_CLEAR 0x00 + +#define WLED3_SINK_REG_CURR_SINK 0x4f +#define WLED3_SINK_REG_CURR_SINK_MASK GENMASK(7, 5) +#define WLED3_SINK_REG_CURR_SINK_SHFT 5 + +/* WLED3 specific per-'string' registers below */ +#define WLED3_SINK_REG_BRIGHT(n) (0x40 + n) + +#define WLED3_SINK_REG_STR_MOD_EN(n) (0x60 + (n * 0x10)) +#define WLED3_SINK_REG_STR_MOD_MASK BIT(7) + +#define WLED3_SINK_REG_STR_FULL_SCALE_CURR(n) (0x62 + (n * 0x10)) +#define WLED3_SINK_REG_STR_FULL_SCALE_CURR_MASK GENMASK(4, 0) + +#define WLED3_SINK_REG_STR_MOD_SRC(n) (0x63 + (n * 0x10)) +#define WLED3_SINK_REG_STR_MOD_SRC_MASK BIT(0) +#define WLED3_SINK_REG_STR_MOD_SRC_INT 0x00 +#define WLED3_SINK_REG_STR_MOD_SRC_EXT 0x01 + +#define WLED3_SINK_REG_STR_CABC(n) (0x66 + (n * 0x10)) +#define WLED3_SINK_REG_STR_CABC_MASK BIT(7) + +/* WLED4 specific control registers */ +#define WLED4_CTRL_REG_SHORT_PROTECT 0x5e +#define WLED4_CTRL_REG_SHORT_EN_MASK BIT(7) + +#define WLED4_CTRL_REG_SEC_ACCESS 0xd0 +#define WLED4_CTRL_REG_SEC_UNLOCK 0xa5 + +#define WLED4_CTRL_REG_TEST1 0xe2 +#define WLED4_CTRL_REG_TEST1_EXT_FET_DTEST2 0x09 + +/* WLED4 specific sink registers */ +#define WLED4_SINK_REG_CURR_SINK 0x46 +#define WLED4_SINK_REG_CURR_SINK_MASK GENMASK(7, 4) +#define WLED4_SINK_REG_CURR_SINK_SHFT 4 + +/* WLED4 specific per-'string' registers below */ +#define WLED4_SINK_REG_STR_MOD_EN(n) (0x50 + (n * 0x10)) +#define WLED4_SINK_REG_STR_MOD_MASK BIT(7) + +#define WLED4_SINK_REG_STR_FULL_SCALE_CURR(n) (0x52 + (n * 0x10)) +#define WLED4_SINK_REG_STR_FULL_SCALE_CURR_MASK GENMASK(3, 0) + +#define WLED4_SINK_REG_STR_MOD_SRC(n) (0x53 + (n * 0x10)) +#define WLED4_SINK_REG_STR_MOD_SRC_MASK BIT(0) +#define WLED4_SINK_REG_STR_MOD_SRC_INT 0x00 +#define WLED4_SINK_REG_STR_MOD_SRC_EXT 0x01 + +#define WLED4_SINK_REG_STR_CABC(n) (0x56 + (n * 0x10)) +#define WLED4_SINK_REG_STR_CABC_MASK BIT(7) + +#define WLED4_SINK_REG_BRIGHT(n) (0x57 + (n * 0x10)) + +/* WLED5 specific control registers */ +#define WLED5_CTRL_REG_OVP_INT_CTL 0x5f +#define WLED5_CTRL_REG_OVP_INT_TIMER_MASK GENMASK(2, 0) + +/* WLED5 specific sink registers */ +#define WLED5_SINK_REG_MOD_A_EN 0x50 +#define WLED5_SINK_REG_MOD_B_EN 0x60 +#define WLED5_SINK_REG_MOD_EN_MASK BIT(7) + +#define WLED5_SINK_REG_MOD_A_SRC_SEL 0x51 +#define WLED5_SINK_REG_MOD_B_SRC_SEL 0x61 +#define WLED5_SINK_REG_MOD_SRC_SEL_HIGH 0 +#define WLED5_SINK_REG_MOD_SRC_SEL_EXT 0x03 +#define WLED5_SINK_REG_MOD_SRC_SEL_MASK GENMASK(1, 0) + +#define WLED5_SINK_REG_MOD_A_BRIGHTNESS_WIDTH_SEL 0x52 +#define WLED5_SINK_REG_MOD_B_BRIGHTNESS_WIDTH_SEL 0x62 +#define WLED5_SINK_REG_BRIGHTNESS_WIDTH_12B 0 +#define WLED5_SINK_REG_BRIGHTNESS_WIDTH_15B 1 + +#define WLED5_SINK_REG_MOD_A_BRIGHTNESS_LSB 0x53 +#define WLED5_SINK_REG_MOD_A_BRIGHTNESS_MSB 0x54 +#define WLED5_SINK_REG_MOD_B_BRIGHTNESS_LSB 0x63 +#define WLED5_SINK_REG_MOD_B_BRIGHTNESS_MSB 0x64 + +#define WLED5_SINK_REG_MOD_SYNC_BIT 0x65 +#define WLED5_SINK_REG_SYNC_MOD_A_BIT BIT(0) +#define WLED5_SINK_REG_SYNC_MOD_B_BIT BIT(1) +#define WLED5_SINK_REG_SYNC_MASK GENMASK(1, 0) + +/* WLED5 specific per-'string' registers below */ +#define WLED5_SINK_REG_STR_FULL_SCALE_CURR(n) (0x72 + (n * 0x10)) + +#define WLED5_SINK_REG_STR_SRC_SEL(n) (0x73 + (n * 0x10)) +#define WLED5_SINK_REG_SRC_SEL_MOD_A 0 +#define WLED5_SINK_REG_SRC_SEL_MOD_B 1 +#define WLED5_SINK_REG_SRC_SEL_MASK GENMASK(1, 0) + +struct wled_var_cfg { + const u32 *values; + u32 (*fn)(u32); + int size; +}; + +struct wled_u32_opts { + const char *name; + u32 *val_ptr; + const struct wled_var_cfg *cfg; +}; + +struct wled_bool_opts { + const char *name; + bool *val_ptr; +}; + +struct wled_config { + u32 boost_i_limit; + u32 ovp; + u32 switch_freq; + u32 num_strings; + u32 string_i_limit; + u32 enabled_strings[WLED_MAX_STRINGS]; + u32 mod_sel; + u32 cabc_sel; + bool cs_out_en; + bool ext_gen; + bool cabc; + bool external_pfet; + bool auto_detection_enabled; +}; + +struct wled { + const char *name; + struct device *dev; + struct regmap *regmap; + struct mutex lock; /* Lock to avoid race from thread irq handler */ + ktime_t last_short_event; + ktime_t start_ovp_fault_time; + u16 ctrl_addr; + u16 sink_addr; + u16 max_string_count; + u16 auto_detection_ovp_count; + u32 brightness; + u32 max_brightness; + u32 short_count; + u32 auto_detect_count; + u32 version; + bool disabled_by_short; + bool has_short_detect; + bool cabc_disabled; + int short_irq; + int ovp_irq; + + struct wled_config cfg; + struct delayed_work ovp_work; + + /* Configures the brightness. Applicable for wled3, wled4 and wled5 */ + int (*wled_set_brightness)(struct wled *wled, u16 brightness); + + /* Configures the cabc register. Applicable for wled4 and wled5 */ + int (*wled_cabc_config)(struct wled *wled, bool enable); + + /* + * Toggles the sync bit for the brightness update to take place. + * Applicable for WLED3, WLED4 and WLED5. + */ + int (*wled_sync_toggle)(struct wled *wled); + + /* + * Time to wait before checking the OVP status after wled module enable. + * Applicable for WLED4 and WLED5. + */ + int (*wled_ovp_delay)(struct wled *wled); + + /* + * Determines if the auto string detection is required. + * Applicable for WLED4 and WLED5 + */ + bool (*wled_auto_detection_required)(struct wled *wled); +}; + +static int wled3_set_brightness(struct wled *wled, u16 brightness) +{ + int rc, i; + __le16 v; + + v = cpu_to_le16(brightness & WLED3_SINK_REG_BRIGHT_MAX); + + for (i = 0; i < wled->cfg.num_strings; ++i) { + rc = regmap_bulk_write(wled->regmap, wled->ctrl_addr + + WLED3_SINK_REG_BRIGHT(wled->cfg.enabled_strings[i]), + &v, sizeof(v)); + if (rc < 0) + return rc; + } + + return 0; +} + +static int wled4_set_brightness(struct wled *wled, u16 brightness) +{ + int rc, i; + u16 low_limit = wled->max_brightness * 4 / 1000; + __le16 v; + + /* WLED4's lower limit of operation is 0.4% */ + if (brightness > 0 && brightness < low_limit) + brightness = low_limit; + + v = cpu_to_le16(brightness & WLED3_SINK_REG_BRIGHT_MAX); + + for (i = 0; i < wled->cfg.num_strings; ++i) { + rc = regmap_bulk_write(wled->regmap, wled->sink_addr + + WLED4_SINK_REG_BRIGHT(wled->cfg.enabled_strings[i]), + &v, sizeof(v)); + if (rc < 0) + return rc; + } + + return 0; +} + +static int wled5_set_brightness(struct wled *wled, u16 brightness) +{ + int rc, offset; + u16 low_limit = wled->max_brightness * 1 / 1000; + __le16 v; + + /* WLED5's lower limit is 0.1% */ + if (brightness < low_limit) + brightness = low_limit; + + v = cpu_to_le16(brightness & WLED5_SINK_REG_BRIGHT_MAX_15B); + + offset = (wled->cfg.mod_sel == MOD_A) ? + WLED5_SINK_REG_MOD_A_BRIGHTNESS_LSB : + WLED5_SINK_REG_MOD_B_BRIGHTNESS_LSB; + + rc = regmap_bulk_write(wled->regmap, wled->sink_addr + offset, + &v, sizeof(v)); + return rc; +} + +static void wled_ovp_work(struct work_struct *work) +{ + struct wled *wled = container_of(work, + struct wled, ovp_work.work); + enable_irq(wled->ovp_irq); +} + +static int wled_module_enable(struct wled *wled, int val) +{ + int rc; + + if (wled->disabled_by_short) + return -ENXIO; + + rc = regmap_update_bits(wled->regmap, wled->ctrl_addr + + WLED3_CTRL_REG_MOD_EN, + WLED3_CTRL_REG_MOD_EN_MASK, + val << WLED3_CTRL_REG_MOD_EN_SHIFT); + if (rc < 0) + return rc; + + if (wled->ovp_irq > 0) { + if (val) { + /* + * The hardware generates a storm of spurious OVP + * interrupts during soft start operations. So defer + * enabling the IRQ for 10ms to ensure that the + * soft start is complete. + */ + schedule_delayed_work(&wled->ovp_work, HZ / 100); + } else { + if (!cancel_delayed_work_sync(&wled->ovp_work)) + disable_irq(wled->ovp_irq); + } + } + + return 0; +} + +static int wled3_sync_toggle(struct wled *wled) +{ + int rc; + unsigned int mask = GENMASK(wled->max_string_count - 1, 0); + + rc = regmap_update_bits(wled->regmap, + wled->sink_addr + WLED3_SINK_REG_SYNC, + mask, WLED3_SINK_REG_SYNC_CLEAR); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->sink_addr + WLED3_SINK_REG_SYNC, + mask, mask); + + return rc; +} + +static int wled5_mod_sync_toggle(struct wled *wled) +{ + int rc; + u8 val; + + rc = regmap_update_bits(wled->regmap, + wled->sink_addr + WLED5_SINK_REG_MOD_SYNC_BIT, + WLED5_SINK_REG_SYNC_MASK, 0); + if (rc < 0) + return rc; + + val = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_SYNC_MOD_A_BIT : + WLED5_SINK_REG_SYNC_MOD_B_BIT; + return regmap_update_bits(wled->regmap, + wled->sink_addr + WLED5_SINK_REG_MOD_SYNC_BIT, + WLED5_SINK_REG_SYNC_MASK, val); +} + +static int wled_ovp_fault_status(struct wled *wled, bool *fault_set) +{ + int rc; + u32 int_rt_sts, fault_sts; + + *fault_set = false; + rc = regmap_read(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_INT_RT_STS, + &int_rt_sts); + if (rc < 0) { + dev_err(wled->dev, "Failed to read INT_RT_STS rc=%d\n", rc); + return rc; + } + + rc = regmap_read(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_FAULT_STATUS, + &fault_sts); + if (rc < 0) { + dev_err(wled->dev, "Failed to read FAULT_STATUS rc=%d\n", rc); + return rc; + } + + if (int_rt_sts & WLED3_CTRL_REG_OVP_FAULT_STATUS) + *fault_set = true; + + if (wled->version == 4 && (fault_sts & WLED3_CTRL_REG_OVP_FAULT_BIT)) + *fault_set = true; + + if (wled->version == 5 && (fault_sts & (WLED3_CTRL_REG_OVP_FAULT_BIT | + WLED5_CTRL_REG_OVP_PRE_ALARM_BIT))) + *fault_set = true; + + if (*fault_set) + dev_dbg(wled->dev, "WLED OVP fault detected, int_rt_sts=0x%x fault_sts=0x%x\n", + int_rt_sts, fault_sts); + + return rc; +} + +static int wled4_ovp_delay(struct wled *wled) +{ + return WLED_SOFT_START_DLY_US; +} + +static int wled5_ovp_delay(struct wled *wled) +{ + int rc, delay_us; + u32 val; + u8 ovp_timer_ms[8] = {1, 2, 4, 8, 12, 16, 20, 24}; + + /* For WLED5, get the delay based on OVP timer */ + rc = regmap_read(wled->regmap, wled->ctrl_addr + + WLED5_CTRL_REG_OVP_INT_CTL, &val); + if (rc < 0) + delay_us = + ovp_timer_ms[val & WLED5_CTRL_REG_OVP_INT_TIMER_MASK] * 1000; + else + delay_us = 2 * WLED_SOFT_START_DLY_US; + + dev_dbg(wled->dev, "delay_time_us: %d\n", delay_us); + + return delay_us; +} + +static int wled_update_status(struct backlight_device *bl) +{ + struct wled *wled = bl_get_data(bl); + u16 brightness = backlight_get_brightness(bl); + int rc = 0; + + mutex_lock(&wled->lock); + if (brightness) { + rc = wled->wled_set_brightness(wled, brightness); + if (rc < 0) { + dev_err(wled->dev, "wled failed to set brightness rc:%d\n", + rc); + goto unlock_mutex; + } + + if (wled->version < 5) { + rc = wled->wled_sync_toggle(wled); + if (rc < 0) { + dev_err(wled->dev, "wled sync failed rc:%d\n", rc); + goto unlock_mutex; + } + } else { + /* + * For WLED5 toggling the MOD_SYNC_BIT updates the + * brightness + */ + rc = wled5_mod_sync_toggle(wled); + if (rc < 0) { + dev_err(wled->dev, "wled mod sync failed rc:%d\n", + rc); + goto unlock_mutex; + } + } + } + + if (!!brightness != !!wled->brightness) { + rc = wled_module_enable(wled, !!brightness); + if (rc < 0) { + dev_err(wled->dev, "wled enable failed rc:%d\n", rc); + goto unlock_mutex; + } + } + + wled->brightness = brightness; + +unlock_mutex: + mutex_unlock(&wled->lock); + + return rc; +} + +static int wled4_cabc_config(struct wled *wled, bool enable) +{ + int i, j, rc; + u8 val; + + for (i = 0; i < wled->cfg.num_strings; i++) { + j = wled->cfg.enabled_strings[i]; + + val = enable ? WLED4_SINK_REG_STR_CABC_MASK : 0; + rc = regmap_update_bits(wled->regmap, wled->sink_addr + + WLED4_SINK_REG_STR_CABC(j), + WLED4_SINK_REG_STR_CABC_MASK, val); + if (rc < 0) + return rc; + } + + return 0; +} + +static int wled5_cabc_config(struct wled *wled, bool enable) +{ + int rc, offset; + u8 reg; + + if (wled->cabc_disabled) + return 0; + + reg = enable ? wled->cfg.cabc_sel : 0; + offset = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_MOD_A_SRC_SEL : + WLED5_SINK_REG_MOD_B_SRC_SEL; + + rc = regmap_update_bits(wled->regmap, wled->sink_addr + offset, + WLED5_SINK_REG_MOD_SRC_SEL_MASK, reg); + if (rc < 0) { + pr_err("Error in configuring CABC rc=%d\n", rc); + return rc; + } + + if (!wled->cfg.cabc_sel) + wled->cabc_disabled = true; + + return 0; +} + +#define WLED_SHORT_DLY_MS 20 +#define WLED_SHORT_CNT_MAX 5 +#define WLED_SHORT_RESET_CNT_DLY_US USEC_PER_SEC + +static irqreturn_t wled_short_irq_handler(int irq, void *_wled) +{ + struct wled *wled = _wled; + int rc; + s64 elapsed_time; + + wled->short_count++; + mutex_lock(&wled->lock); + rc = wled_module_enable(wled, false); + if (rc < 0) { + dev_err(wled->dev, "wled disable failed rc:%d\n", rc); + goto unlock_mutex; + } + + elapsed_time = ktime_us_delta(ktime_get(), + wled->last_short_event); + if (elapsed_time > WLED_SHORT_RESET_CNT_DLY_US) + wled->short_count = 1; + + if (wled->short_count > WLED_SHORT_CNT_MAX) { + dev_err(wled->dev, "Short triggered %d times, disabling WLED forever!\n", + wled->short_count); + wled->disabled_by_short = true; + goto unlock_mutex; + } + + wled->last_short_event = ktime_get(); + + msleep(WLED_SHORT_DLY_MS); + rc = wled_module_enable(wled, true); + if (rc < 0) + dev_err(wled->dev, "wled enable failed rc:%d\n", rc); + +unlock_mutex: + mutex_unlock(&wled->lock); + + return IRQ_HANDLED; +} + +#define AUTO_DETECT_BRIGHTNESS 200 + +static void wled_auto_string_detection(struct wled *wled) +{ + int rc = 0, i, j, delay_time_us; + u32 sink_config = 0; + u8 sink_test = 0, sink_valid = 0, val; + bool fault_set; + + /* Read configured sink configuration */ + rc = regmap_read(wled->regmap, wled->sink_addr + + WLED4_SINK_REG_CURR_SINK, &sink_config); + if (rc < 0) { + dev_err(wled->dev, "Failed to read SINK configuration rc=%d\n", + rc); + goto failed_detect; + } + + /* Disable the module before starting detection */ + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_MOD_EN, + WLED3_CTRL_REG_MOD_EN_MASK, 0); + if (rc < 0) { + dev_err(wled->dev, "Failed to disable WLED module rc=%d\n", rc); + goto failed_detect; + } + + /* Set low brightness across all sinks */ + rc = wled4_set_brightness(wled, AUTO_DETECT_BRIGHTNESS); + if (rc < 0) { + dev_err(wled->dev, "Failed to set brightness for auto detection rc=%d\n", + rc); + goto failed_detect; + } + + if (wled->cfg.cabc) { + rc = wled->wled_cabc_config(wled, false); + if (rc < 0) + goto failed_detect; + } + + /* Disable all sinks */ + rc = regmap_write(wled->regmap, + wled->sink_addr + WLED4_SINK_REG_CURR_SINK, 0); + if (rc < 0) { + dev_err(wled->dev, "Failed to disable all sinks rc=%d\n", rc); + goto failed_detect; + } + + /* Iterate through the strings one by one */ + for (i = 0; i < wled->cfg.num_strings; i++) { + j = wled->cfg.enabled_strings[i]; + sink_test = BIT((WLED4_SINK_REG_CURR_SINK_SHFT + j)); + + /* Enable feedback control */ + rc = regmap_write(wled->regmap, wled->ctrl_addr + + WLED3_CTRL_REG_FEEDBACK_CONTROL, j + 1); + if (rc < 0) { + dev_err(wled->dev, "Failed to enable feedback for SINK %d rc = %d\n", + j + 1, rc); + goto failed_detect; + } + + /* Enable the sink */ + rc = regmap_write(wled->regmap, wled->sink_addr + + WLED4_SINK_REG_CURR_SINK, sink_test); + if (rc < 0) { + dev_err(wled->dev, "Failed to configure SINK %d rc=%d\n", + j + 1, rc); + goto failed_detect; + } + + /* Enable the module */ + rc = regmap_update_bits(wled->regmap, wled->ctrl_addr + + WLED3_CTRL_REG_MOD_EN, + WLED3_CTRL_REG_MOD_EN_MASK, + WLED3_CTRL_REG_MOD_EN_MASK); + if (rc < 0) { + dev_err(wled->dev, "Failed to enable WLED module rc=%d\n", + rc); + goto failed_detect; + } + + delay_time_us = wled->wled_ovp_delay(wled); + usleep_range(delay_time_us, delay_time_us + 1000); + + rc = wled_ovp_fault_status(wled, &fault_set); + if (rc < 0) { + dev_err(wled->dev, "Error in getting OVP fault_sts, rc=%d\n", + rc); + goto failed_detect; + } + + if (fault_set) + dev_dbg(wled->dev, "WLED OVP fault detected with SINK %d\n", + j + 1); + else + sink_valid |= sink_test; + + /* Disable the module */ + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_MOD_EN, + WLED3_CTRL_REG_MOD_EN_MASK, 0); + if (rc < 0) { + dev_err(wled->dev, "Failed to disable WLED module rc=%d\n", + rc); + goto failed_detect; + } + } + + if (!sink_valid) { + dev_err(wled->dev, "No valid WLED sinks found\n"); + wled->disabled_by_short = true; + goto failed_detect; + } + + if (sink_valid != sink_config) { + dev_warn(wled->dev, "%x is not a valid sink configuration - using %x instead\n", + sink_config, sink_valid); + sink_config = sink_valid; + } + + /* Write the new sink configuration */ + rc = regmap_write(wled->regmap, + wled->sink_addr + WLED4_SINK_REG_CURR_SINK, + sink_config); + if (rc < 0) { + dev_err(wled->dev, "Failed to reconfigure the default sink rc=%d\n", + rc); + goto failed_detect; + } + + /* Enable valid sinks */ + if (wled->version == 4) { + for (i = 0; i < wled->cfg.num_strings; i++) { + j = wled->cfg.enabled_strings[i]; + if (sink_config & + BIT(WLED4_SINK_REG_CURR_SINK_SHFT + j)) + val = WLED4_SINK_REG_STR_MOD_MASK; + else + /* Disable modulator_en for unused sink */ + val = 0; + + rc = regmap_write(wled->regmap, wled->sink_addr + + WLED4_SINK_REG_STR_MOD_EN(j), val); + if (rc < 0) { + dev_err(wled->dev, "Failed to configure MODULATOR_EN rc=%d\n", + rc); + goto failed_detect; + } + } + } + + /* Enable CABC */ + rc = wled->wled_cabc_config(wled, true); + if (rc < 0) + goto failed_detect; + + /* Restore the feedback setting */ + rc = regmap_write(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_FEEDBACK_CONTROL, 0); + if (rc < 0) { + dev_err(wled->dev, "Failed to restore feedback setting rc=%d\n", + rc); + goto failed_detect; + } + + /* Restore brightness */ + rc = wled4_set_brightness(wled, wled->brightness); + if (rc < 0) { + dev_err(wled->dev, "Failed to set brightness after auto detection rc=%d\n", + rc); + goto failed_detect; + } + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_MOD_EN, + WLED3_CTRL_REG_MOD_EN_MASK, + WLED3_CTRL_REG_MOD_EN_MASK); + if (rc < 0) { + dev_err(wled->dev, "Failed to enable WLED module rc=%d\n", rc); + goto failed_detect; + } + +failed_detect: + return; +} + +#define WLED_AUTO_DETECT_OVP_COUNT 5 +#define WLED_AUTO_DETECT_CNT_DLY_US USEC_PER_SEC + +static bool wled4_auto_detection_required(struct wled *wled) +{ + s64 elapsed_time_us; + + if (!wled->cfg.auto_detection_enabled) + return false; + + /* + * Check if the OVP fault was an occasional one + * or if it's firing continuously, the latter qualifies + * for an auto-detection check. + */ + if (!wled->auto_detection_ovp_count) { + wled->start_ovp_fault_time = ktime_get(); + wled->auto_detection_ovp_count++; + } else { + elapsed_time_us = ktime_us_delta(ktime_get(), + wled->start_ovp_fault_time); + if (elapsed_time_us > WLED_AUTO_DETECT_CNT_DLY_US) + wled->auto_detection_ovp_count = 0; + else + wled->auto_detection_ovp_count++; + + if (wled->auto_detection_ovp_count >= + WLED_AUTO_DETECT_OVP_COUNT) { + wled->auto_detection_ovp_count = 0; + return true; + } + } + + return false; +} + +static bool wled5_auto_detection_required(struct wled *wled) +{ + if (!wled->cfg.auto_detection_enabled) + return false; + + /* + * Unlike WLED4, WLED5 has OVP fault density interrupt configuration + * i.e. to count the number of OVP alarms for a certain duration before + * triggering OVP fault interrupt. By default, number of OVP fault + * events counted before an interrupt is fired is 32 and the time + * interval is 12 ms. If we see one OVP fault interrupt, then that + * should qualify for a real OVP fault condition to run auto detection + * algorithm. + */ + return true; +} + +static int wled_auto_detection_at_init(struct wled *wled) +{ + int rc; + bool fault_set; + + if (!wled->cfg.auto_detection_enabled) + return 0; + + rc = wled_ovp_fault_status(wled, &fault_set); + if (rc < 0) { + dev_err(wled->dev, "Error in getting OVP fault_sts, rc=%d\n", + rc); + return rc; + } + + if (fault_set) { + mutex_lock(&wled->lock); + wled_auto_string_detection(wled); + mutex_unlock(&wled->lock); + } + + return rc; +} + +static irqreturn_t wled_ovp_irq_handler(int irq, void *_wled) +{ + struct wled *wled = _wled; + int rc; + u32 int_sts, fault_sts; + + rc = regmap_read(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_INT_RT_STS, &int_sts); + if (rc < 0) { + dev_err(wled->dev, "Error in reading WLED3_INT_RT_STS rc=%d\n", + rc); + return IRQ_HANDLED; + } + + rc = regmap_read(wled->regmap, wled->ctrl_addr + + WLED3_CTRL_REG_FAULT_STATUS, &fault_sts); + if (rc < 0) { + dev_err(wled->dev, "Error in reading WLED_FAULT_STATUS rc=%d\n", + rc); + return IRQ_HANDLED; + } + + if (fault_sts & (WLED3_CTRL_REG_OVP_FAULT_BIT | + WLED3_CTRL_REG_ILIM_FAULT_BIT)) + dev_dbg(wled->dev, "WLED OVP fault detected, int_sts=%x fault_sts= %x\n", + int_sts, fault_sts); + + if (fault_sts & WLED3_CTRL_REG_OVP_FAULT_BIT) { + if (wled->wled_auto_detection_required(wled)) { + mutex_lock(&wled->lock); + wled_auto_string_detection(wled); + mutex_unlock(&wled->lock); + } + } + + return IRQ_HANDLED; +} + +static int wled3_setup(struct wled *wled) +{ + u16 addr; + u8 sink_en = 0; + int rc, i, j; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_OVP, + WLED3_CTRL_REG_OVP_MASK, wled->cfg.ovp); + if (rc) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_ILIMIT, + WLED3_CTRL_REG_ILIMIT_MASK, + wled->cfg.boost_i_limit); + if (rc) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_FREQ, + WLED3_CTRL_REG_FREQ_MASK, + wled->cfg.switch_freq); + if (rc) + return rc; + + for (i = 0; i < wled->cfg.num_strings; ++i) { + j = wled->cfg.enabled_strings[i]; + addr = wled->ctrl_addr + WLED3_SINK_REG_STR_MOD_EN(j); + rc = regmap_update_bits(wled->regmap, addr, + WLED3_SINK_REG_STR_MOD_MASK, + WLED3_SINK_REG_STR_MOD_MASK); + if (rc) + return rc; + + if (wled->cfg.ext_gen) { + addr = wled->ctrl_addr + WLED3_SINK_REG_STR_MOD_SRC(j); + rc = regmap_update_bits(wled->regmap, addr, + WLED3_SINK_REG_STR_MOD_SRC_MASK, + WLED3_SINK_REG_STR_MOD_SRC_EXT); + if (rc) + return rc; + } + + addr = wled->ctrl_addr + WLED3_SINK_REG_STR_FULL_SCALE_CURR(j); + rc = regmap_update_bits(wled->regmap, addr, + WLED3_SINK_REG_STR_FULL_SCALE_CURR_MASK, + wled->cfg.string_i_limit); + if (rc) + return rc; + + addr = wled->ctrl_addr + WLED3_SINK_REG_STR_CABC(j); + rc = regmap_update_bits(wled->regmap, addr, + WLED3_SINK_REG_STR_CABC_MASK, + wled->cfg.cabc ? + WLED3_SINK_REG_STR_CABC_MASK : 0); + if (rc) + return rc; + + sink_en |= BIT(j + WLED3_SINK_REG_CURR_SINK_SHFT); + } + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_SINK_REG_CURR_SINK, + WLED3_SINK_REG_CURR_SINK_MASK, sink_en); + if (rc) + return rc; + + return 0; +} + +static const struct wled_config wled3_config_defaults = { + .boost_i_limit = 3, + .string_i_limit = 20, + .ovp = 2, + .num_strings = 3, + .switch_freq = 5, + .cs_out_en = false, + .ext_gen = false, + .cabc = false, + .enabled_strings = {0, 1, 2}, +}; + +static int wled4_setup(struct wled *wled) +{ + int rc, temp, i, j; + u16 addr; + u8 sink_en = 0; + u32 sink_cfg; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_OVP, + WLED3_CTRL_REG_OVP_MASK, wled->cfg.ovp); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_ILIMIT, + WLED3_CTRL_REG_ILIMIT_MASK, + wled->cfg.boost_i_limit); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_FREQ, + WLED3_CTRL_REG_FREQ_MASK, + wled->cfg.switch_freq); + if (rc < 0) + return rc; + + if (wled->cfg.external_pfet) { + /* Unlock the secure register access */ + rc = regmap_write(wled->regmap, wled->ctrl_addr + + WLED4_CTRL_REG_SEC_ACCESS, + WLED4_CTRL_REG_SEC_UNLOCK); + if (rc < 0) + return rc; + + rc = regmap_write(wled->regmap, + wled->ctrl_addr + WLED4_CTRL_REG_TEST1, + WLED4_CTRL_REG_TEST1_EXT_FET_DTEST2); + if (rc < 0) + return rc; + } + + rc = regmap_read(wled->regmap, wled->sink_addr + + WLED4_SINK_REG_CURR_SINK, &sink_cfg); + if (rc < 0) + return rc; + + for (i = 0; i < wled->cfg.num_strings; i++) { + j = wled->cfg.enabled_strings[i]; + temp = j + WLED4_SINK_REG_CURR_SINK_SHFT; + sink_en |= 1 << temp; + } + + if (sink_cfg == sink_en) { + rc = wled_auto_detection_at_init(wled); + return rc; + } + + rc = regmap_update_bits(wled->regmap, + wled->sink_addr + WLED4_SINK_REG_CURR_SINK, + WLED4_SINK_REG_CURR_SINK_MASK, 0); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, wled->ctrl_addr + + WLED3_CTRL_REG_MOD_EN, + WLED3_CTRL_REG_MOD_EN_MASK, 0); + if (rc < 0) + return rc; + + /* Per sink/string configuration */ + for (i = 0; i < wled->cfg.num_strings; i++) { + j = wled->cfg.enabled_strings[i]; + + addr = wled->sink_addr + + WLED4_SINK_REG_STR_MOD_EN(j); + rc = regmap_update_bits(wled->regmap, addr, + WLED4_SINK_REG_STR_MOD_MASK, + WLED4_SINK_REG_STR_MOD_MASK); + if (rc < 0) + return rc; + + addr = wled->sink_addr + + WLED4_SINK_REG_STR_FULL_SCALE_CURR(j); + rc = regmap_update_bits(wled->regmap, addr, + WLED4_SINK_REG_STR_FULL_SCALE_CURR_MASK, + wled->cfg.string_i_limit); + if (rc < 0) + return rc; + } + + rc = wled4_cabc_config(wled, wled->cfg.cabc); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, wled->ctrl_addr + + WLED3_CTRL_REG_MOD_EN, + WLED3_CTRL_REG_MOD_EN_MASK, + WLED3_CTRL_REG_MOD_EN_MASK); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->sink_addr + WLED4_SINK_REG_CURR_SINK, + WLED4_SINK_REG_CURR_SINK_MASK, sink_en); + if (rc < 0) + return rc; + + rc = wled->wled_sync_toggle(wled); + if (rc < 0) { + dev_err(wled->dev, "Failed to toggle sync reg rc:%d\n", rc); + return rc; + } + + rc = wled_auto_detection_at_init(wled); + + return rc; +} + +static const struct wled_config wled4_config_defaults = { + .boost_i_limit = 4, + .string_i_limit = 10, + .ovp = 1, + .num_strings = 4, + .switch_freq = 11, + .cabc = false, + .external_pfet = false, + .auto_detection_enabled = false, + .enabled_strings = {0, 1, 2, 3}, +}; + +static int wled5_setup(struct wled *wled) +{ + int rc, temp, i, j, offset; + u8 sink_en = 0; + u16 addr; + u32 val; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_OVP, + WLED5_CTRL_REG_OVP_MASK, wled->cfg.ovp); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_ILIMIT, + WLED3_CTRL_REG_ILIMIT_MASK, + wled->cfg.boost_i_limit); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_FREQ, + WLED3_CTRL_REG_FREQ_MASK, + wled->cfg.switch_freq); + if (rc < 0) + return rc; + + /* Per sink/string configuration */ + for (i = 0; i < wled->cfg.num_strings; ++i) { + j = wled->cfg.enabled_strings[i]; + addr = wled->sink_addr + + WLED4_SINK_REG_STR_FULL_SCALE_CURR(j); + rc = regmap_update_bits(wled->regmap, addr, + WLED4_SINK_REG_STR_FULL_SCALE_CURR_MASK, + wled->cfg.string_i_limit); + if (rc < 0) + return rc; + + addr = wled->sink_addr + WLED5_SINK_REG_STR_SRC_SEL(j); + rc = regmap_update_bits(wled->regmap, addr, + WLED5_SINK_REG_SRC_SEL_MASK, + wled->cfg.mod_sel == MOD_A ? + WLED5_SINK_REG_SRC_SEL_MOD_A : + WLED5_SINK_REG_SRC_SEL_MOD_B); + + temp = j + WLED4_SINK_REG_CURR_SINK_SHFT; + sink_en |= 1 << temp; + } + + rc = wled5_cabc_config(wled, wled->cfg.cabc_sel ? true : false); + if (rc < 0) + return rc; + + /* Enable one of the modulators A or B based on mod_sel */ + addr = wled->sink_addr + WLED5_SINK_REG_MOD_A_EN; + val = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_MOD_EN_MASK : 0; + rc = regmap_update_bits(wled->regmap, addr, + WLED5_SINK_REG_MOD_EN_MASK, val); + if (rc < 0) + return rc; + + addr = wled->sink_addr + WLED5_SINK_REG_MOD_B_EN; + val = (wled->cfg.mod_sel == MOD_B) ? WLED5_SINK_REG_MOD_EN_MASK : 0; + rc = regmap_update_bits(wled->regmap, addr, + WLED5_SINK_REG_MOD_EN_MASK, val); + if (rc < 0) + return rc; + + offset = (wled->cfg.mod_sel == MOD_A) ? + WLED5_SINK_REG_MOD_A_BRIGHTNESS_WIDTH_SEL : + WLED5_SINK_REG_MOD_B_BRIGHTNESS_WIDTH_SEL; + + addr = wled->sink_addr + offset; + val = (wled->max_brightness == WLED5_SINK_REG_BRIGHT_MAX_15B) ? + WLED5_SINK_REG_BRIGHTNESS_WIDTH_15B : + WLED5_SINK_REG_BRIGHTNESS_WIDTH_12B; + rc = regmap_write(wled->regmap, addr, val); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->sink_addr + WLED4_SINK_REG_CURR_SINK, + WLED4_SINK_REG_CURR_SINK_MASK, sink_en); + if (rc < 0) + return rc; + + /* This updates only FSC configuration in WLED5 */ + rc = wled->wled_sync_toggle(wled); + if (rc < 0) { + pr_err("Failed to toggle sync reg rc:%d\n", rc); + return rc; + } + + rc = wled_auto_detection_at_init(wled); + if (rc < 0) + return rc; + + return 0; +} + +static const struct wled_config wled5_config_defaults = { + .boost_i_limit = 5, + .string_i_limit = 10, + .ovp = 4, + .num_strings = 4, + .switch_freq = 11, + .mod_sel = 0, + .cabc_sel = 0, + .cabc = false, + .external_pfet = false, + .auto_detection_enabled = false, + .enabled_strings = {0, 1, 2, 3}, +}; + +static const u32 wled3_boost_i_limit_values[] = { + 105, 385, 525, 805, 980, 1260, 1400, 1680, +}; + +static const struct wled_var_cfg wled3_boost_i_limit_cfg = { + .values = wled3_boost_i_limit_values, + .size = ARRAY_SIZE(wled3_boost_i_limit_values), +}; + +static const u32 wled4_boost_i_limit_values[] = { + 105, 280, 450, 620, 970, 1150, 1300, 1500, +}; + +static const struct wled_var_cfg wled4_boost_i_limit_cfg = { + .values = wled4_boost_i_limit_values, + .size = ARRAY_SIZE(wled4_boost_i_limit_values), +}; + +static inline u32 wled5_boost_i_limit_values_fn(u32 idx) +{ + return 525 + (idx * 175); +} + +static const struct wled_var_cfg wled5_boost_i_limit_cfg = { + .fn = wled5_boost_i_limit_values_fn, + .size = 8, +}; + +static const u32 wled3_ovp_values[] = { + 35, 32, 29, 27, +}; + +static const struct wled_var_cfg wled3_ovp_cfg = { + .values = wled3_ovp_values, + .size = ARRAY_SIZE(wled3_ovp_values), +}; + +static const u32 wled4_ovp_values[] = { + 31100, 29600, 19600, 18100, +}; + +static const struct wled_var_cfg wled4_ovp_cfg = { + .values = wled4_ovp_values, + .size = ARRAY_SIZE(wled4_ovp_values), +}; + +static inline u32 wled5_ovp_values_fn(u32 idx) +{ + /* + * 0000 - 38.5 V + * 0001 - 37 V .. + * 1111 - 16 V + */ + return 38500 - (idx * 1500); +} + +static const struct wled_var_cfg wled5_ovp_cfg = { + .fn = wled5_ovp_values_fn, + .size = 16, +}; + +static u32 wled3_switch_freq_values_fn(u32 idx) +{ + return 19200 / (2 * (1 + idx)); +} + +static const struct wled_var_cfg wled3_switch_freq_cfg = { + .fn = wled3_switch_freq_values_fn, + .size = 16, +}; + +static const struct wled_var_cfg wled3_string_i_limit_cfg = { + .size = 26, +}; + +static const u32 wled4_string_i_limit_values[] = { + 0, 2500, 5000, 7500, 10000, 12500, 15000, 17500, 20000, + 22500, 25000, 27500, 30000, +}; + +static const struct wled_var_cfg wled4_string_i_limit_cfg = { + .values = wled4_string_i_limit_values, + .size = ARRAY_SIZE(wled4_string_i_limit_values), +}; + +static const struct wled_var_cfg wled5_mod_sel_cfg = { + .size = 2, +}; + +static const struct wled_var_cfg wled5_cabc_sel_cfg = { + .size = 4, +}; + +static u32 wled_values(const struct wled_var_cfg *cfg, u32 idx) +{ + if (idx >= cfg->size) + return UINT_MAX; + if (cfg->fn) + return cfg->fn(idx); + if (cfg->values) + return cfg->values[idx]; + return idx; +} + +static int wled_configure(struct wled *wled) +{ + struct wled_config *cfg = &wled->cfg; + struct device *dev = wled->dev; + const __be32 *prop_addr; + u32 size, val, c; + int rc, i, j, string_len; + + const struct wled_u32_opts *u32_opts = NULL; + const struct wled_u32_opts wled3_opts[] = { + { + .name = "qcom,current-boost-limit", + .val_ptr = &cfg->boost_i_limit, + .cfg = &wled3_boost_i_limit_cfg, + }, + { + .name = "qcom,current-limit", + .val_ptr = &cfg->string_i_limit, + .cfg = &wled3_string_i_limit_cfg, + }, + { + .name = "qcom,ovp", + .val_ptr = &cfg->ovp, + .cfg = &wled3_ovp_cfg, + }, + { + .name = "qcom,switching-freq", + .val_ptr = &cfg->switch_freq, + .cfg = &wled3_switch_freq_cfg, + }, + }; + + const struct wled_u32_opts wled4_opts[] = { + { + .name = "qcom,current-boost-limit", + .val_ptr = &cfg->boost_i_limit, + .cfg = &wled4_boost_i_limit_cfg, + }, + { + .name = "qcom,current-limit-microamp", + .val_ptr = &cfg->string_i_limit, + .cfg = &wled4_string_i_limit_cfg, + }, + { + .name = "qcom,ovp-millivolt", + .val_ptr = &cfg->ovp, + .cfg = &wled4_ovp_cfg, + }, + { + .name = "qcom,switching-freq", + .val_ptr = &cfg->switch_freq, + .cfg = &wled3_switch_freq_cfg, + }, + }; + + const struct wled_u32_opts wled5_opts[] = { + { + .name = "qcom,current-boost-limit", + .val_ptr = &cfg->boost_i_limit, + .cfg = &wled5_boost_i_limit_cfg, + }, + { + .name = "qcom,current-limit-microamp", + .val_ptr = &cfg->string_i_limit, + .cfg = &wled4_string_i_limit_cfg, + }, + { + .name = "qcom,ovp-millivolt", + .val_ptr = &cfg->ovp, + .cfg = &wled5_ovp_cfg, + }, + { + .name = "qcom,switching-freq", + .val_ptr = &cfg->switch_freq, + .cfg = &wled3_switch_freq_cfg, + }, + { + .name = "qcom,modulator-sel", + .val_ptr = &cfg->mod_sel, + .cfg = &wled5_mod_sel_cfg, + }, + { + .name = "qcom,cabc-sel", + .val_ptr = &cfg->cabc_sel, + .cfg = &wled5_cabc_sel_cfg, + }, + }; + + const struct wled_bool_opts bool_opts[] = { + { "qcom,cs-out", &cfg->cs_out_en, }, + { "qcom,ext-gen", &cfg->ext_gen, }, + { "qcom,cabc", &cfg->cabc, }, + { "qcom,external-pfet", &cfg->external_pfet, }, + { "qcom,auto-string-detection", &cfg->auto_detection_enabled, }, + }; + + prop_addr = of_get_address(dev->of_node, 0, NULL, NULL); + if (!prop_addr) { + dev_err(wled->dev, "invalid IO resources\n"); + return -EINVAL; + } + wled->ctrl_addr = be32_to_cpu(*prop_addr); + + rc = of_property_read_string(dev->of_node, "label", &wled->name); + if (rc) + wled->name = devm_kasprintf(dev, GFP_KERNEL, "%pOFn", dev->of_node); + + switch (wled->version) { + case 3: + u32_opts = wled3_opts; + size = ARRAY_SIZE(wled3_opts); + *cfg = wled3_config_defaults; + wled->wled_set_brightness = wled3_set_brightness; + wled->wled_sync_toggle = wled3_sync_toggle; + wled->max_string_count = 3; + wled->sink_addr = wled->ctrl_addr; + break; + + case 4: + u32_opts = wled4_opts; + size = ARRAY_SIZE(wled4_opts); + *cfg = wled4_config_defaults; + wled->wled_set_brightness = wled4_set_brightness; + wled->wled_sync_toggle = wled3_sync_toggle; + wled->wled_cabc_config = wled4_cabc_config; + wled->wled_ovp_delay = wled4_ovp_delay; + wled->wled_auto_detection_required = + wled4_auto_detection_required; + wled->max_string_count = 4; + + prop_addr = of_get_address(dev->of_node, 1, NULL, NULL); + if (!prop_addr) { + dev_err(wled->dev, "invalid IO resources\n"); + return -EINVAL; + } + wled->sink_addr = be32_to_cpu(*prop_addr); + break; + + case 5: + u32_opts = wled5_opts; + size = ARRAY_SIZE(wled5_opts); + *cfg = wled5_config_defaults; + wled->wled_set_brightness = wled5_set_brightness; + wled->wled_sync_toggle = wled3_sync_toggle; + wled->wled_cabc_config = wled5_cabc_config; + wled->wled_ovp_delay = wled5_ovp_delay; + wled->wled_auto_detection_required = + wled5_auto_detection_required; + wled->max_string_count = 4; + + prop_addr = of_get_address(dev->of_node, 1, NULL, NULL); + if (!prop_addr) { + dev_err(wled->dev, "invalid IO resources\n"); + return -EINVAL; + } + wled->sink_addr = be32_to_cpu(*prop_addr); + break; + + default: + dev_err(wled->dev, "Invalid WLED version\n"); + return -EINVAL; + } + + for (i = 0; i < size; ++i) { + rc = of_property_read_u32(dev->of_node, u32_opts[i].name, &val); + if (rc == -EINVAL) { + continue; + } else if (rc) { + dev_err(dev, "error reading '%s'\n", u32_opts[i].name); + return rc; + } + + c = UINT_MAX; + for (j = 0; c != val; j++) { + c = wled_values(u32_opts[i].cfg, j); + if (c == UINT_MAX) { + dev_err(dev, "invalid value for '%s'\n", + u32_opts[i].name); + return -EINVAL; + } + + if (c == val) + break; + } + + dev_dbg(dev, "'%s' = %u\n", u32_opts[i].name, c); + *u32_opts[i].val_ptr = j; + } + + for (i = 0; i < ARRAY_SIZE(bool_opts); ++i) { + if (of_property_read_bool(dev->of_node, bool_opts[i].name)) + *bool_opts[i].val_ptr = true; + } + + string_len = of_property_count_elems_of_size(dev->of_node, + "qcom,enabled-strings", + sizeof(u32)); + if (string_len > 0) { + if (string_len > wled->max_string_count) { + dev_err(dev, "Cannot have more than %d strings\n", + wled->max_string_count); + return -EINVAL; + } + + rc = of_property_read_u32_array(dev->of_node, + "qcom,enabled-strings", + wled->cfg.enabled_strings, + string_len); + if (rc) { + dev_err(dev, "Failed to read %d elements from qcom,enabled-strings: %d\n", + string_len, rc); + return rc; + } + + for (i = 0; i < string_len; ++i) { + if (wled->cfg.enabled_strings[i] >= wled->max_string_count) { + dev_err(dev, + "qcom,enabled-strings index %d at %d is out of bounds\n", + wled->cfg.enabled_strings[i], i); + return -EINVAL; + } + } + + cfg->num_strings = string_len; + } + + rc = of_property_read_u32(dev->of_node, "qcom,num-strings", &val); + if (!rc) { + if (val < 1 || val > wled->max_string_count) { + dev_err(dev, "qcom,num-strings must be between 1 and %d\n", + wled->max_string_count); + return -EINVAL; + } + + if (string_len > 0) { + dev_warn(dev, "Only one of qcom,num-strings or qcom,enabled-strings" + " should be set\n"); + if (val > string_len) { + dev_err(dev, "qcom,num-strings exceeds qcom,enabled-strings\n"); + return -EINVAL; + } + } + + cfg->num_strings = val; + } + + return 0; +} + +static int wled_configure_short_irq(struct wled *wled, + struct platform_device *pdev) +{ + int rc; + + if (!wled->has_short_detect) + return 0; + + rc = regmap_update_bits(wled->regmap, wled->ctrl_addr + + WLED4_CTRL_REG_SHORT_PROTECT, + WLED4_CTRL_REG_SHORT_EN_MASK, + WLED4_CTRL_REG_SHORT_EN_MASK); + if (rc < 0) + return rc; + + wled->short_irq = platform_get_irq_byname(pdev, "short"); + if (wled->short_irq < 0) { + dev_dbg(&pdev->dev, "short irq is not used\n"); + return 0; + } + + rc = devm_request_threaded_irq(wled->dev, wled->short_irq, + NULL, wled_short_irq_handler, + IRQF_ONESHOT, + "wled_short_irq", wled); + if (rc < 0) + dev_err(wled->dev, "Unable to request short_irq (err:%d)\n", + rc); + + return rc; +} + +static int wled_configure_ovp_irq(struct wled *wled, + struct platform_device *pdev) +{ + int rc; + u32 val; + + wled->ovp_irq = platform_get_irq_byname(pdev, "ovp"); + if (wled->ovp_irq < 0) { + dev_dbg(&pdev->dev, "OVP IRQ not found - disabling automatic string detection\n"); + return 0; + } + + rc = devm_request_threaded_irq(wled->dev, wled->ovp_irq, NULL, + wled_ovp_irq_handler, IRQF_ONESHOT, + "wled_ovp_irq", wled); + if (rc < 0) { + dev_err(wled->dev, "Unable to request ovp_irq (err:%d)\n", + rc); + wled->ovp_irq = 0; + return 0; + } + + rc = regmap_read(wled->regmap, wled->ctrl_addr + + WLED3_CTRL_REG_MOD_EN, &val); + if (rc < 0) + return rc; + + /* Keep OVP irq disabled until module is enabled */ + if (!(val & WLED3_CTRL_REG_MOD_EN_MASK)) + disable_irq(wled->ovp_irq); + + return 0; +} + +static const struct backlight_ops wled_ops = { + .update_status = wled_update_status, +}; + +static int wled_probe(struct platform_device *pdev) +{ + struct backlight_properties props; + struct backlight_device *bl; + struct wled *wled; + struct regmap *regmap; + u32 val; + int rc; + + regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!regmap) { + dev_err(&pdev->dev, "Unable to get regmap\n"); + return -EINVAL; + } + + wled = devm_kzalloc(&pdev->dev, sizeof(*wled), GFP_KERNEL); + if (!wled) + return -ENOMEM; + + wled->regmap = regmap; + wled->dev = &pdev->dev; + + wled->version = (uintptr_t)of_device_get_match_data(&pdev->dev); + if (!wled->version) { + dev_err(&pdev->dev, "Unknown device version\n"); + return -ENODEV; + } + + mutex_init(&wled->lock); + rc = wled_configure(wled); + if (rc) + return rc; + + val = WLED3_SINK_REG_BRIGHT_MAX; + of_property_read_u32(pdev->dev.of_node, "max-brightness", &val); + wled->max_brightness = val; + + switch (wled->version) { + case 3: + wled->cfg.auto_detection_enabled = false; + rc = wled3_setup(wled); + if (rc) { + dev_err(&pdev->dev, "wled3_setup failed\n"); + return rc; + } + break; + + case 4: + wled->has_short_detect = true; + rc = wled4_setup(wled); + if (rc) { + dev_err(&pdev->dev, "wled4_setup failed\n"); + return rc; + } + break; + + case 5: + wled->has_short_detect = true; + if (wled->cfg.cabc_sel) + wled->max_brightness = WLED5_SINK_REG_BRIGHT_MAX_12B; + + rc = wled5_setup(wled); + if (rc) { + dev_err(&pdev->dev, "wled5_setup failed\n"); + return rc; + } + break; + + default: + dev_err(wled->dev, "Invalid WLED version\n"); + break; + } + + INIT_DELAYED_WORK(&wled->ovp_work, wled_ovp_work); + + rc = wled_configure_short_irq(wled, pdev); + if (rc < 0) + return rc; + + rc = wled_configure_ovp_irq(wled, pdev); + if (rc < 0) + return rc; + + val = WLED_DEFAULT_BRIGHTNESS; + of_property_read_u32(pdev->dev.of_node, "default-brightness", &val); + + memset(&props, 0, sizeof(struct backlight_properties)); + props.type = BACKLIGHT_RAW; + props.brightness = val; + props.max_brightness = wled->max_brightness; + bl = devm_backlight_device_register(&pdev->dev, wled->name, + &pdev->dev, wled, + &wled_ops, &props); + return PTR_ERR_OR_ZERO(bl); +}; + +static void wled_remove(struct platform_device *pdev) +{ + struct wled *wled = platform_get_drvdata(pdev); + + mutex_destroy(&wled->lock); + cancel_delayed_work_sync(&wled->ovp_work); + disable_irq(wled->short_irq); + disable_irq(wled->ovp_irq); +} + +static const struct of_device_id wled_match_table[] = { + { .compatible = "qcom,pm8941-wled", .data = (void *)3 }, + { .compatible = "qcom,pmi8950-wled", .data = (void *)4 }, + { .compatible = "qcom,pmi8994-wled", .data = (void *)4 }, + { .compatible = "qcom,pmi8998-wled", .data = (void *)4 }, + { .compatible = "qcom,pm660l-wled", .data = (void *)4 }, + { .compatible = "qcom,pm6150l-wled", .data = (void *)5 }, + { .compatible = "qcom,pm8150l-wled", .data = (void *)5 }, + {} +}; +MODULE_DEVICE_TABLE(of, wled_match_table); + +static struct platform_driver wled_driver = { + .probe = wled_probe, + .remove_new = wled_remove, + .driver = { + .name = "qcom,wled", + .of_match_table = wled_match_table, + }, +}; + +module_platform_driver(wled_driver); + +MODULE_DESCRIPTION("Qualcomm WLED driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/video/backlight/rave-sp-backlight.c b/drivers/video/backlight/rave-sp-backlight.c new file mode 100644 index 0000000000..05b5f003a3 --- /dev/null +++ b/drivers/video/backlight/rave-sp-backlight.c @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/* + * LCD Backlight driver for RAVE SP + * + * Copyright (C) 2018 Zodiac Inflight Innovations + * + */ + +#include <linux/backlight.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mfd/rave-sp.h> +#include <linux/platform_device.h> + +#define RAVE_SP_BACKLIGHT_LCD_EN BIT(7) + +static int rave_sp_backlight_update_status(struct backlight_device *bd) +{ + const struct backlight_properties *p = &bd->props; + const u8 intensity = + (p->power == FB_BLANK_UNBLANK) ? p->brightness : 0; + struct rave_sp *sp = dev_get_drvdata(&bd->dev); + u8 cmd[] = { + [0] = RAVE_SP_CMD_SET_BACKLIGHT, + [1] = 0, + [2] = intensity ? RAVE_SP_BACKLIGHT_LCD_EN | intensity : 0, + [3] = 0, + [4] = 0, + }; + + return rave_sp_exec(sp, cmd, sizeof(cmd), NULL, 0); +} + +static const struct backlight_ops rave_sp_backlight_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = rave_sp_backlight_update_status, +}; + +static struct backlight_properties rave_sp_backlight_props = { + .type = BACKLIGHT_PLATFORM, + .max_brightness = 100, + .brightness = 50, +}; + +static int rave_sp_backlight_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct backlight_device *bd; + + bd = devm_backlight_device_register(dev, pdev->name, dev, + dev_get_drvdata(dev->parent), + &rave_sp_backlight_ops, + &rave_sp_backlight_props); + if (IS_ERR(bd)) + return PTR_ERR(bd); + + /* + * If there is a phandle pointing to the device node we can + * assume that another device will manage the status changes. + * If not we make sure the backlight is in a consistent state. + */ + if (!dev->of_node->phandle) + backlight_update_status(bd); + + return 0; +} + +static const struct of_device_id rave_sp_backlight_of_match[] = { + { .compatible = "zii,rave-sp-backlight" }, + {} +}; + +static struct platform_driver rave_sp_backlight_driver = { + .probe = rave_sp_backlight_probe, + .driver = { + .name = KBUILD_MODNAME, + .of_match_table = rave_sp_backlight_of_match, + }, +}; +module_platform_driver(rave_sp_backlight_driver); + +MODULE_DEVICE_TABLE(of, rave_sp_backlight_of_match); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Andrey Vostrikov <andrey.vostrikov@cogentembedded.com>"); +MODULE_AUTHOR("Nikita Yushchenko <nikita.yoush@cogentembedded.com>"); +MODULE_AUTHOR("Andrey Smirnov <andrew.smirnov@gmail.com>"); +MODULE_DESCRIPTION("RAVE SP Backlight driver"); diff --git a/drivers/video/backlight/rt4831-backlight.c b/drivers/video/backlight/rt4831-backlight.c new file mode 100644 index 0000000000..7d1af4c2ca --- /dev/null +++ b/drivers/video/backlight/rt4831-backlight.c @@ -0,0 +1,232 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include <dt-bindings/leds/rt4831-backlight.h> +#include <linux/backlight.h> +#include <linux/bitops.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/regmap.h> + +#define RT4831_REG_BLCFG 0x02 +#define RT4831_REG_BLDIML 0x04 +#define RT4831_REG_ENABLE 0x08 +#define RT4831_REG_BLOPT2 0x11 + +#define RT4831_BLMAX_BRIGHTNESS 2048 + +#define RT4831_BLOVP_MASK GENMASK(7, 5) +#define RT4831_BLOVP_SHIFT 5 +#define RT4831_BLPWMEN_MASK BIT(0) +#define RT4831_BLEN_MASK BIT(4) +#define RT4831_BLCH_MASK GENMASK(3, 0) +#define RT4831_BLDIML_MASK GENMASK(2, 0) +#define RT4831_BLDIMH_MASK GENMASK(10, 3) +#define RT4831_BLDIMH_SHIFT 3 +#define RT4831_BLOCP_MASK GENMASK(1, 0) + +#define RT4831_BLOCP_MINUA 900000 +#define RT4831_BLOCP_MAXUA 1800000 +#define RT4831_BLOCP_STEPUA 300000 + +struct rt4831_priv { + struct device *dev; + struct regmap *regmap; + struct backlight_device *bl; +}; + +static int rt4831_bl_update_status(struct backlight_device *bl_dev) +{ + struct rt4831_priv *priv = bl_get_data(bl_dev); + int brightness = backlight_get_brightness(bl_dev); + unsigned int enable = brightness ? RT4831_BLEN_MASK : 0; + u8 v[2]; + int ret; + + if (brightness) { + v[0] = (brightness - 1) & RT4831_BLDIML_MASK; + v[1] = ((brightness - 1) & RT4831_BLDIMH_MASK) >> RT4831_BLDIMH_SHIFT; + + ret = regmap_raw_write(priv->regmap, RT4831_REG_BLDIML, v, sizeof(v)); + if (ret) + return ret; + } + + return regmap_update_bits(priv->regmap, RT4831_REG_ENABLE, RT4831_BLEN_MASK, enable); + +} + +static int rt4831_bl_get_brightness(struct backlight_device *bl_dev) +{ + struct rt4831_priv *priv = bl_get_data(bl_dev); + unsigned int val; + u8 v[2]; + int ret; + + ret = regmap_read(priv->regmap, RT4831_REG_ENABLE, &val); + if (ret) + return ret; + + if (!(val & RT4831_BLEN_MASK)) + return 0; + + ret = regmap_raw_read(priv->regmap, RT4831_REG_BLDIML, v, sizeof(v)); + if (ret) + return ret; + + ret = (v[1] << RT4831_BLDIMH_SHIFT) + (v[0] & RT4831_BLDIML_MASK) + 1; + + return ret; +} + +static const struct backlight_ops rt4831_bl_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = rt4831_bl_update_status, + .get_brightness = rt4831_bl_get_brightness, +}; + +static int rt4831_parse_backlight_properties(struct rt4831_priv *priv, + struct backlight_properties *bl_props) +{ + struct device *dev = priv->dev; + u8 propval; + u32 brightness, ocp_uA; + unsigned int val = 0; + int ret; + + /* common properties */ + ret = device_property_read_u32(dev, "max-brightness", &brightness); + if (ret) + brightness = RT4831_BLMAX_BRIGHTNESS; + + bl_props->max_brightness = min_t(u32, brightness, RT4831_BLMAX_BRIGHTNESS); + + ret = device_property_read_u32(dev, "default-brightness", &brightness); + if (ret) + brightness = bl_props->max_brightness; + + bl_props->brightness = min_t(u32, brightness, bl_props->max_brightness); + + /* vendor properties */ + if (device_property_read_bool(dev, "richtek,pwm-enable")) + val = RT4831_BLPWMEN_MASK; + + ret = regmap_update_bits(priv->regmap, RT4831_REG_BLCFG, RT4831_BLPWMEN_MASK, val); + if (ret) + return ret; + + ret = device_property_read_u8(dev, "richtek,bled-ovp-sel", &propval); + if (ret) + propval = RT4831_BLOVPLVL_21V; + + propval = min_t(u8, propval, RT4831_BLOVPLVL_29V); + ret = regmap_update_bits(priv->regmap, RT4831_REG_BLCFG, RT4831_BLOVP_MASK, + propval << RT4831_BLOVP_SHIFT); + if (ret) + return ret; + + /* + * This OCP level is used to protect and limit the inductor current. + * If inductor peak current reach the level, low-side MOSFET will be + * turned off. Meanwhile, the output channel current may be limited. + * To match the configured channel current, the inductor chosen must + * be higher than the OCP level. + * + * Not like the OVP level, the default 21V can be used in the most + * application. But if the chosen OCP level is smaller than needed, + * it will also affect the backlight channel output current to be + * smaller than the register setting. + */ + ret = device_property_read_u32(dev, "richtek,bled-ocp-microamp", + &ocp_uA); + if (!ret) { + ocp_uA = clamp_val(ocp_uA, RT4831_BLOCP_MINUA, + RT4831_BLOCP_MAXUA); + val = DIV_ROUND_UP(ocp_uA - RT4831_BLOCP_MINUA, + RT4831_BLOCP_STEPUA); + ret = regmap_update_bits(priv->regmap, RT4831_REG_BLOPT2, + RT4831_BLOCP_MASK, val); + if (ret) + return ret; + } + + ret = device_property_read_u8(dev, "richtek,channel-use", &propval); + if (ret) { + dev_err(dev, "richtek,channel-use DT property missing\n"); + return ret; + } + + if (!(propval & RT4831_BLCH_MASK)) { + dev_err(dev, "No channel specified\n"); + return -EINVAL; + } + + return regmap_update_bits(priv->regmap, RT4831_REG_ENABLE, RT4831_BLCH_MASK, propval); +} + +static int rt4831_bl_probe(struct platform_device *pdev) +{ + struct rt4831_priv *priv; + struct backlight_properties bl_props = { .type = BACKLIGHT_RAW, + .scale = BACKLIGHT_SCALE_LINEAR }; + int ret; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = &pdev->dev; + + priv->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!priv->regmap) { + dev_err(&pdev->dev, "Failed to init regmap\n"); + return -ENODEV; + } + + ret = rt4831_parse_backlight_properties(priv, &bl_props); + if (ret) { + dev_err(&pdev->dev, "Failed to parse backlight properties\n"); + return ret; + } + + priv->bl = devm_backlight_device_register(&pdev->dev, pdev->name, &pdev->dev, priv, + &rt4831_bl_ops, &bl_props); + if (IS_ERR(priv->bl)) { + dev_err(&pdev->dev, "Failed to register backlight\n"); + return PTR_ERR(priv->bl); + } + + backlight_update_status(priv->bl); + platform_set_drvdata(pdev, priv); + + return 0; +} + +static void rt4831_bl_remove(struct platform_device *pdev) +{ + struct rt4831_priv *priv = platform_get_drvdata(pdev); + struct backlight_device *bl_dev = priv->bl; + + bl_dev->props.brightness = 0; + backlight_update_status(priv->bl); +} + +static const struct of_device_id __maybe_unused rt4831_bl_of_match[] = { + { .compatible = "richtek,rt4831-backlight", }, + {} +}; +MODULE_DEVICE_TABLE(of, rt4831_bl_of_match); + +static struct platform_driver rt4831_bl_driver = { + .driver = { + .name = "rt4831-backlight", + .of_match_table = rt4831_bl_of_match, + }, + .probe = rt4831_bl_probe, + .remove_new = rt4831_bl_remove, +}; +module_platform_driver(rt4831_bl_driver); + +MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/video/backlight/sky81452-backlight.c b/drivers/video/backlight/sky81452-backlight.c new file mode 100644 index 0000000000..eb18c6eb0f --- /dev/null +++ b/drivers/video/backlight/sky81452-backlight.c @@ -0,0 +1,351 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * sky81452-backlight.c SKY81452 backlight driver + * + * Copyright 2014 Skyworks Solutions Inc. + * Author : Gyungoh Yoo <jack.yoo@skyworksinc.com> + */ + +#include <linux/backlight.h> +#include <linux/err.h> +#include <linux/gpio/consumer.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +/* registers */ +#define SKY81452_REG0 0x00 +#define SKY81452_REG1 0x01 +#define SKY81452_REG2 0x02 +#define SKY81452_REG4 0x04 +#define SKY81452_REG5 0x05 + +/* bit mask */ +#define SKY81452_CS 0xFF +#define SKY81452_EN 0x3F +#define SKY81452_IGPW 0x20 +#define SKY81452_PWMMD 0x10 +#define SKY81452_PHASE 0x08 +#define SKY81452_ILIM 0x04 +#define SKY81452_VSHRT 0x03 +#define SKY81452_OCP 0x80 +#define SKY81452_OTMP 0x40 +#define SKY81452_SHRT 0x3F +#define SKY81452_OPN 0x3F + +#define SKY81452_DEFAULT_NAME "lcd-backlight" +#define SKY81452_MAX_BRIGHTNESS (SKY81452_CS + 1) + +/** + * struct sky81452_bl_platform_data - backlight platform data + * @name: backlight driver name. + * If it is not defined, default name is lcd-backlight. + * @gpiod_enable:GPIO descriptor which control EN pin + * @enable: Enable mask for current sink channel 1, 2, 3, 4, 5 and 6. + * @ignore_pwm: true if DPWMI should be ignored. + * @dpwm_mode: true is DPWM dimming mode, otherwise Analog dimming mode. + * @phase_shift:true is phase shift mode. + * @short_detection_threshold: It should be one of 4, 5, 6 and 7V. + * @boost_current_limit: It should be one of 2300, 2750mA. + */ +struct sky81452_bl_platform_data { + const char *name; + struct gpio_desc *gpiod_enable; + unsigned int enable; + bool ignore_pwm; + bool dpwm_mode; + bool phase_shift; + unsigned int short_detection_threshold; + unsigned int boost_current_limit; +}; + +#define CTZ(b) __builtin_ctz(b) + +static int sky81452_bl_update_status(struct backlight_device *bd) +{ + const struct sky81452_bl_platform_data *pdata = + dev_get_platdata(bd->dev.parent); + const unsigned int brightness = (unsigned int)bd->props.brightness; + struct regmap *regmap = bl_get_data(bd); + int ret; + + if (brightness > 0) { + ret = regmap_write(regmap, SKY81452_REG0, brightness - 1); + if (ret < 0) + return ret; + + return regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN, + pdata->enable << CTZ(SKY81452_EN)); + } + + return regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN, 0); +} + +static const struct backlight_ops sky81452_bl_ops = { + .update_status = sky81452_bl_update_status, +}; + +static ssize_t sky81452_bl_store_enable(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct regmap *regmap = bl_get_data(to_backlight_device(dev)); + unsigned long value; + int ret; + + ret = kstrtoul(buf, 16, &value); + if (ret < 0) + return ret; + + ret = regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN, + value << CTZ(SKY81452_EN)); + if (ret < 0) + return ret; + + return count; +} + +static ssize_t sky81452_bl_show_open_short(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regmap *regmap = bl_get_data(to_backlight_device(dev)); + unsigned int reg, value = 0; + char tmp[3]; + int i, ret; + + reg = !strcmp(attr->attr.name, "open") ? SKY81452_REG5 : SKY81452_REG4; + ret = regmap_read(regmap, reg, &value); + if (ret < 0) + return ret; + + if (value & SKY81452_SHRT) { + *buf = 0; + for (i = 0; i < 6; i++) { + if (value & 0x01) { + sprintf(tmp, "%d ", i + 1); + strcat(buf, tmp); + } + value >>= 1; + } + strcat(buf, "\n"); + } else { + strcpy(buf, "none\n"); + } + + return strlen(buf); +} + +static ssize_t sky81452_bl_show_fault(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regmap *regmap = bl_get_data(to_backlight_device(dev)); + unsigned int value = 0; + int ret; + + ret = regmap_read(regmap, SKY81452_REG4, &value); + if (ret < 0) + return ret; + + *buf = 0; + + if (value & SKY81452_OCP) + strcat(buf, "over-current "); + + if (value & SKY81452_OTMP) + strcat(buf, "over-temperature"); + + strcat(buf, "\n"); + return strlen(buf); +} + +static DEVICE_ATTR(enable, S_IWGRP | S_IWUSR, NULL, sky81452_bl_store_enable); +static DEVICE_ATTR(open, S_IRUGO, sky81452_bl_show_open_short, NULL); +static DEVICE_ATTR(short, S_IRUGO, sky81452_bl_show_open_short, NULL); +static DEVICE_ATTR(fault, S_IRUGO, sky81452_bl_show_fault, NULL); + +static struct attribute *sky81452_bl_attribute[] = { + &dev_attr_enable.attr, + &dev_attr_open.attr, + &dev_attr_short.attr, + &dev_attr_fault.attr, + NULL +}; + +static const struct attribute_group sky81452_bl_attr_group = { + .attrs = sky81452_bl_attribute, +}; + +#ifdef CONFIG_OF +static struct sky81452_bl_platform_data *sky81452_bl_parse_dt( + struct device *dev) +{ + struct device_node *np = of_node_get(dev->of_node); + struct sky81452_bl_platform_data *pdata; + int num_entry; + unsigned int sources[6]; + int ret; + + if (!np) { + dev_err(dev, "backlight node not found.\n"); + return ERR_PTR(-ENODATA); + } + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + of_node_put(np); + return ERR_PTR(-ENOMEM); + } + + of_property_read_string(np, "name", &pdata->name); + pdata->ignore_pwm = of_property_read_bool(np, "skyworks,ignore-pwm"); + pdata->dpwm_mode = of_property_read_bool(np, "skyworks,dpwm-mode"); + pdata->phase_shift = of_property_read_bool(np, "skyworks,phase-shift"); + pdata->gpiod_enable = devm_gpiod_get_optional(dev, NULL, GPIOD_OUT_HIGH); + + ret = of_property_count_u32_elems(np, "led-sources"); + if (ret < 0) { + pdata->enable = SKY81452_EN >> CTZ(SKY81452_EN); + } else { + num_entry = ret; + if (num_entry > 6) + num_entry = 6; + + ret = of_property_read_u32_array(np, "led-sources", sources, + num_entry); + if (ret < 0) { + dev_err(dev, "led-sources node is invalid.\n"); + of_node_put(np); + return ERR_PTR(-EINVAL); + } + + pdata->enable = 0; + while (--num_entry) + pdata->enable |= (1 << sources[num_entry]); + } + + ret = of_property_read_u32(np, + "skyworks,short-detection-threshold-volt", + &pdata->short_detection_threshold); + if (ret < 0) + pdata->short_detection_threshold = 7; + + ret = of_property_read_u32(np, "skyworks,current-limit-mA", + &pdata->boost_current_limit); + if (ret < 0) + pdata->boost_current_limit = 2750; + + of_node_put(np); + return pdata; +} +#else +static struct sky81452_bl_platform_data *sky81452_bl_parse_dt( + struct device *dev) +{ + return ERR_PTR(-EINVAL); +} +#endif + +static int sky81452_bl_init_device(struct regmap *regmap, + struct sky81452_bl_platform_data *pdata) +{ + unsigned int value; + + value = pdata->ignore_pwm ? SKY81452_IGPW : 0; + value |= pdata->dpwm_mode ? SKY81452_PWMMD : 0; + value |= pdata->phase_shift ? 0 : SKY81452_PHASE; + + if (pdata->boost_current_limit == 2300) + value |= SKY81452_ILIM; + else if (pdata->boost_current_limit != 2750) + return -EINVAL; + + if (pdata->short_detection_threshold < 4 || + pdata->short_detection_threshold > 7) + return -EINVAL; + value |= (7 - pdata->short_detection_threshold) << CTZ(SKY81452_VSHRT); + + return regmap_write(regmap, SKY81452_REG2, value); +} + +static int sky81452_bl_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct regmap *regmap = dev_get_drvdata(dev->parent); + struct sky81452_bl_platform_data *pdata; + struct backlight_device *bd; + struct backlight_properties props; + const char *name; + int ret; + + pdata = sky81452_bl_parse_dt(dev); + if (IS_ERR(pdata)) + return PTR_ERR(pdata); + + ret = sky81452_bl_init_device(regmap, pdata); + if (ret < 0) { + dev_err(dev, "failed to initialize. err=%d\n", ret); + return ret; + } + + memset(&props, 0, sizeof(props)); + props.max_brightness = SKY81452_MAX_BRIGHTNESS; + name = pdata->name ? pdata->name : SKY81452_DEFAULT_NAME; + bd = devm_backlight_device_register(dev, name, dev, regmap, + &sky81452_bl_ops, &props); + if (IS_ERR(bd)) { + dev_err(dev, "failed to register. err=%ld\n", PTR_ERR(bd)); + return PTR_ERR(bd); + } + + platform_set_drvdata(pdev, bd); + + ret = sysfs_create_group(&bd->dev.kobj, &sky81452_bl_attr_group); + if (ret < 0) { + dev_err(dev, "failed to create attribute. err=%d\n", ret); + return ret; + } + + return ret; +} + +static void sky81452_bl_remove(struct platform_device *pdev) +{ + const struct sky81452_bl_platform_data *pdata = + dev_get_platdata(&pdev->dev); + struct backlight_device *bd = platform_get_drvdata(pdev); + + sysfs_remove_group(&bd->dev.kobj, &sky81452_bl_attr_group); + + bd->props.power = FB_BLANK_UNBLANK; + bd->props.brightness = 0; + backlight_update_status(bd); + + if (pdata->gpiod_enable) + gpiod_set_value_cansleep(pdata->gpiod_enable, 0); +} + +#ifdef CONFIG_OF +static const struct of_device_id sky81452_bl_of_match[] = { + { .compatible = "skyworks,sky81452-backlight", }, + { } +}; +MODULE_DEVICE_TABLE(of, sky81452_bl_of_match); +#endif + +static struct platform_driver sky81452_bl_driver = { + .driver = { + .name = "sky81452-backlight", + .of_match_table = of_match_ptr(sky81452_bl_of_match), + }, + .probe = sky81452_bl_probe, + .remove_new = sky81452_bl_remove, +}; + +module_platform_driver(sky81452_bl_driver); + +MODULE_DESCRIPTION("Skyworks SKY81452 backlight driver"); +MODULE_AUTHOR("Gyungoh Yoo <jack.yoo@skyworksinc.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/video/backlight/tdo24m.c b/drivers/video/backlight/tdo24m.c new file mode 100644 index 0000000000..fc6fbaf855 --- /dev/null +++ b/drivers/video/backlight/tdo24m.c @@ -0,0 +1,448 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * tdo24m - SPI-based drivers for Toppoly TDO24M series LCD panels + * + * Copyright (C) 2008 Marvell International Ltd. + * Eric Miao <eric.miao@marvell.com> + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/spi/spi.h> +#include <linux/spi/tdo24m.h> +#include <linux/fb.h> +#include <linux/lcd.h> +#include <linux/slab.h> + +#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL) + +#define TDO24M_SPI_BUFF_SIZE (4) +#define MODE_QVGA 0 +#define MODE_VGA 1 + +struct tdo24m { + struct spi_device *spi_dev; + struct lcd_device *lcd_dev; + + struct spi_message msg; + struct spi_transfer xfer; + uint8_t *buf; + + int (*adj_mode)(struct tdo24m *lcd, int mode); + int color_invert; + + int power; + int mode; +}; + +/* use bit 30, 31 as the indicator of command parameter number */ +#define CMD0(x) ((0 << 30) | (x)) +#define CMD1(x, x1) ((1 << 30) | ((x) << 9) | 0x100 | (x1)) +#define CMD2(x, x1, x2) ((2 << 30) | ((x) << 18) | 0x20000 |\ + ((x1) << 9) | 0x100 | (x2)) +#define CMD_NULL (-1) + +static const uint32_t lcd_panel_reset[] = { + CMD0(0x1), /* reset */ + CMD0(0x0), /* nop */ + CMD0(0x0), /* nop */ + CMD0(0x0), /* nop */ + CMD_NULL, +}; + +static const uint32_t lcd_panel_on[] = { + CMD0(0x29), /* Display ON */ + CMD2(0xB8, 0xFF, 0xF9), /* Output Control */ + CMD0(0x11), /* Sleep out */ + CMD1(0xB0, 0x16), /* Wake */ + CMD_NULL, +}; + +static const uint32_t lcd_panel_off[] = { + CMD0(0x28), /* Display OFF */ + CMD2(0xB8, 0x80, 0x02), /* Output Control */ + CMD0(0x10), /* Sleep in */ + CMD1(0xB0, 0x00), /* Deep stand by in */ + CMD_NULL, +}; + +static const uint32_t lcd_vga_pass_through_tdo24m[] = { + CMD1(0xB0, 0x16), + CMD1(0xBC, 0x80), + CMD1(0xE1, 0x00), + CMD1(0x36, 0x50), + CMD1(0x3B, 0x00), + CMD_NULL, +}; + +static const uint32_t lcd_qvga_pass_through_tdo24m[] = { + CMD1(0xB0, 0x16), + CMD1(0xBC, 0x81), + CMD1(0xE1, 0x00), + CMD1(0x36, 0x50), + CMD1(0x3B, 0x22), + CMD_NULL, +}; + +static const uint32_t lcd_vga_transfer_tdo24m[] = { + CMD1(0xcf, 0x02), /* Blanking period control (1) */ + CMD2(0xd0, 0x08, 0x04), /* Blanking period control (2) */ + CMD1(0xd1, 0x01), /* CKV timing control on/off */ + CMD2(0xd2, 0x14, 0x00), /* CKV 1,2 timing control */ + CMD2(0xd3, 0x1a, 0x0f), /* OEV timing control */ + CMD2(0xd4, 0x1f, 0xaf), /* ASW timing control (1) */ + CMD1(0xd5, 0x14), /* ASW timing control (2) */ + CMD0(0x21), /* Invert for normally black display */ + CMD0(0x29), /* Display on */ + CMD_NULL, +}; + +static const uint32_t lcd_qvga_transfer[] = { + CMD1(0xd6, 0x02), /* Blanking period control (1) */ + CMD2(0xd7, 0x08, 0x04), /* Blanking period control (2) */ + CMD1(0xd8, 0x01), /* CKV timing control on/off */ + CMD2(0xd9, 0x00, 0x08), /* CKV 1,2 timing control */ + CMD2(0xde, 0x05, 0x0a), /* OEV timing control */ + CMD2(0xdf, 0x0a, 0x19), /* ASW timing control (1) */ + CMD1(0xe0, 0x0a), /* ASW timing control (2) */ + CMD0(0x21), /* Invert for normally black display */ + CMD0(0x29), /* Display on */ + CMD_NULL, +}; + +static const uint32_t lcd_vga_pass_through_tdo35s[] = { + CMD1(0xB0, 0x16), + CMD1(0xBC, 0x80), + CMD1(0xE1, 0x00), + CMD1(0x3B, 0x00), + CMD_NULL, +}; + +static const uint32_t lcd_qvga_pass_through_tdo35s[] = { + CMD1(0xB0, 0x16), + CMD1(0xBC, 0x81), + CMD1(0xE1, 0x00), + CMD1(0x3B, 0x22), + CMD_NULL, +}; + +static const uint32_t lcd_vga_transfer_tdo35s[] = { + CMD1(0xcf, 0x02), /* Blanking period control (1) */ + CMD2(0xd0, 0x08, 0x04), /* Blanking period control (2) */ + CMD1(0xd1, 0x01), /* CKV timing control on/off */ + CMD2(0xd2, 0x00, 0x1e), /* CKV 1,2 timing control */ + CMD2(0xd3, 0x14, 0x28), /* OEV timing control */ + CMD2(0xd4, 0x28, 0x64), /* ASW timing control (1) */ + CMD1(0xd5, 0x28), /* ASW timing control (2) */ + CMD0(0x21), /* Invert for normally black display */ + CMD0(0x29), /* Display on */ + CMD_NULL, +}; + +static const uint32_t lcd_panel_config[] = { + CMD2(0xb8, 0xff, 0xf9), /* Output control */ + CMD0(0x11), /* sleep out */ + CMD1(0xba, 0x01), /* Display mode (1) */ + CMD1(0xbb, 0x00), /* Display mode (2) */ + CMD1(0x3a, 0x60), /* Display mode 18-bit RGB */ + CMD1(0xbf, 0x10), /* Drive system change control */ + CMD1(0xb1, 0x56), /* Booster operation setup */ + CMD1(0xb2, 0x33), /* Booster mode setup */ + CMD1(0xb3, 0x11), /* Booster frequency setup */ + CMD1(0xb4, 0x02), /* Op amp/system clock */ + CMD1(0xb5, 0x35), /* VCS voltage */ + CMD1(0xb6, 0x40), /* VCOM voltage */ + CMD1(0xb7, 0x03), /* External display signal */ + CMD1(0xbd, 0x00), /* ASW slew rate */ + CMD1(0xbe, 0x00), /* Dummy data for QuadData operation */ + CMD1(0xc0, 0x11), /* Sleep out FR count (A) */ + CMD1(0xc1, 0x11), /* Sleep out FR count (B) */ + CMD1(0xc2, 0x11), /* Sleep out FR count (C) */ + CMD2(0xc3, 0x20, 0x40), /* Sleep out FR count (D) */ + CMD2(0xc4, 0x60, 0xc0), /* Sleep out FR count (E) */ + CMD2(0xc5, 0x10, 0x20), /* Sleep out FR count (F) */ + CMD1(0xc6, 0xc0), /* Sleep out FR count (G) */ + CMD2(0xc7, 0x33, 0x43), /* Gamma 1 fine tuning (1) */ + CMD1(0xc8, 0x44), /* Gamma 1 fine tuning (2) */ + CMD1(0xc9, 0x33), /* Gamma 1 inclination adjustment */ + CMD1(0xca, 0x00), /* Gamma 1 blue offset adjustment */ + CMD2(0xec, 0x01, 0xf0), /* Horizontal clock cycles */ + CMD_NULL, +}; + +static int tdo24m_writes(struct tdo24m *lcd, const uint32_t *array) +{ + struct spi_transfer *x = &lcd->xfer; + const uint32_t *p = array; + uint32_t data; + int nparams, err = 0; + + for (; *p != CMD_NULL; p++) { + if (!lcd->color_invert && *p == CMD0(0x21)) + continue; + + nparams = (*p >> 30) & 0x3; + + data = *p << (7 - nparams); + switch (nparams) { + case 0: + lcd->buf[0] = (data >> 8) & 0xff; + lcd->buf[1] = data & 0xff; + break; + case 1: + lcd->buf[0] = (data >> 16) & 0xff; + lcd->buf[1] = (data >> 8) & 0xff; + lcd->buf[2] = data & 0xff; + break; + case 2: + lcd->buf[0] = (data >> 24) & 0xff; + lcd->buf[1] = (data >> 16) & 0xff; + lcd->buf[2] = (data >> 8) & 0xff; + lcd->buf[3] = data & 0xff; + break; + default: + continue; + } + x->len = nparams + 2; + err = spi_sync(lcd->spi_dev, &lcd->msg); + if (err) + break; + } + + return err; +} + +static int tdo24m_adj_mode(struct tdo24m *lcd, int mode) +{ + switch (mode) { + case MODE_VGA: + tdo24m_writes(lcd, lcd_vga_pass_through_tdo24m); + tdo24m_writes(lcd, lcd_panel_config); + tdo24m_writes(lcd, lcd_vga_transfer_tdo24m); + break; + case MODE_QVGA: + tdo24m_writes(lcd, lcd_qvga_pass_through_tdo24m); + tdo24m_writes(lcd, lcd_panel_config); + tdo24m_writes(lcd, lcd_qvga_transfer); + break; + default: + return -EINVAL; + } + + lcd->mode = mode; + return 0; +} + +static int tdo35s_adj_mode(struct tdo24m *lcd, int mode) +{ + switch (mode) { + case MODE_VGA: + tdo24m_writes(lcd, lcd_vga_pass_through_tdo35s); + tdo24m_writes(lcd, lcd_panel_config); + tdo24m_writes(lcd, lcd_vga_transfer_tdo35s); + break; + case MODE_QVGA: + tdo24m_writes(lcd, lcd_qvga_pass_through_tdo35s); + tdo24m_writes(lcd, lcd_panel_config); + tdo24m_writes(lcd, lcd_qvga_transfer); + break; + default: + return -EINVAL; + } + + lcd->mode = mode; + return 0; +} + +static int tdo24m_power_on(struct tdo24m *lcd) +{ + int err; + + err = tdo24m_writes(lcd, lcd_panel_on); + if (err) + goto out; + + err = tdo24m_writes(lcd, lcd_panel_reset); + if (err) + goto out; + + err = lcd->adj_mode(lcd, lcd->mode); +out: + return err; +} + +static int tdo24m_power_off(struct tdo24m *lcd) +{ + return tdo24m_writes(lcd, lcd_panel_off); +} + +static int tdo24m_power(struct tdo24m *lcd, int power) +{ + int ret = 0; + + if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->power)) + ret = tdo24m_power_on(lcd); + else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->power)) + ret = tdo24m_power_off(lcd); + + if (!ret) + lcd->power = power; + + return ret; +} + + +static int tdo24m_set_power(struct lcd_device *ld, int power) +{ + struct tdo24m *lcd = lcd_get_data(ld); + + return tdo24m_power(lcd, power); +} + +static int tdo24m_get_power(struct lcd_device *ld) +{ + struct tdo24m *lcd = lcd_get_data(ld); + + return lcd->power; +} + +static int tdo24m_set_mode(struct lcd_device *ld, struct fb_videomode *m) +{ + struct tdo24m *lcd = lcd_get_data(ld); + int mode = MODE_QVGA; + + if (m->xres == 640 || m->xres == 480) + mode = MODE_VGA; + + if (lcd->mode == mode) + return 0; + + return lcd->adj_mode(lcd, mode); +} + +static struct lcd_ops tdo24m_ops = { + .get_power = tdo24m_get_power, + .set_power = tdo24m_set_power, + .set_mode = tdo24m_set_mode, +}; + +static int tdo24m_probe(struct spi_device *spi) +{ + struct tdo24m *lcd; + struct spi_message *m; + struct spi_transfer *x; + struct tdo24m_platform_data *pdata; + enum tdo24m_model model; + int err; + + pdata = dev_get_platdata(&spi->dev); + if (pdata) + model = pdata->model; + else + model = TDO24M; + + spi->bits_per_word = 8; + spi->mode = SPI_MODE_3; + err = spi_setup(spi); + if (err) + return err; + + lcd = devm_kzalloc(&spi->dev, sizeof(struct tdo24m), GFP_KERNEL); + if (!lcd) + return -ENOMEM; + + lcd->spi_dev = spi; + lcd->power = FB_BLANK_POWERDOWN; + lcd->mode = MODE_VGA; /* default to VGA */ + + lcd->buf = devm_kzalloc(&spi->dev, TDO24M_SPI_BUFF_SIZE, GFP_KERNEL); + if (lcd->buf == NULL) + return -ENOMEM; + + m = &lcd->msg; + x = &lcd->xfer; + + spi_message_init(m); + + x->cs_change = 0; + x->tx_buf = &lcd->buf[0]; + spi_message_add_tail(x, m); + + switch (model) { + case TDO24M: + lcd->color_invert = 1; + lcd->adj_mode = tdo24m_adj_mode; + break; + case TDO35S: + lcd->adj_mode = tdo35s_adj_mode; + lcd->color_invert = 0; + break; + default: + dev_err(&spi->dev, "Unsupported model"); + return -EINVAL; + } + + lcd->lcd_dev = devm_lcd_device_register(&spi->dev, "tdo24m", &spi->dev, + lcd, &tdo24m_ops); + if (IS_ERR(lcd->lcd_dev)) + return PTR_ERR(lcd->lcd_dev); + + spi_set_drvdata(spi, lcd); + err = tdo24m_power(lcd, FB_BLANK_UNBLANK); + if (err) + return err; + + return 0; +} + +static void tdo24m_remove(struct spi_device *spi) +{ + struct tdo24m *lcd = spi_get_drvdata(spi); + + tdo24m_power(lcd, FB_BLANK_POWERDOWN); +} + +#ifdef CONFIG_PM_SLEEP +static int tdo24m_suspend(struct device *dev) +{ + struct tdo24m *lcd = dev_get_drvdata(dev); + + return tdo24m_power(lcd, FB_BLANK_POWERDOWN); +} + +static int tdo24m_resume(struct device *dev) +{ + struct tdo24m *lcd = dev_get_drvdata(dev); + + return tdo24m_power(lcd, FB_BLANK_UNBLANK); +} +#endif + +static SIMPLE_DEV_PM_OPS(tdo24m_pm_ops, tdo24m_suspend, tdo24m_resume); + +/* Power down all displays on reboot, poweroff or halt */ +static void tdo24m_shutdown(struct spi_device *spi) +{ + struct tdo24m *lcd = spi_get_drvdata(spi); + + tdo24m_power(lcd, FB_BLANK_POWERDOWN); +} + +static struct spi_driver tdo24m_driver = { + .driver = { + .name = "tdo24m", + .pm = &tdo24m_pm_ops, + }, + .probe = tdo24m_probe, + .remove = tdo24m_remove, + .shutdown = tdo24m_shutdown, +}; + +module_spi_driver(tdo24m_driver); + +MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>"); +MODULE_DESCRIPTION("Driver for Toppoly TDO24M LCD Panel"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("spi:tdo24m"); diff --git a/drivers/video/backlight/tps65217_bl.c b/drivers/video/backlight/tps65217_bl.c new file mode 100644 index 0000000000..d96d713fe7 --- /dev/null +++ b/drivers/video/backlight/tps65217_bl.c @@ -0,0 +1,318 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * tps65217_bl.c + * + * TPS65217 backlight driver + * + * Copyright (C) 2012 Matthias Kaehlcke + * Author: Matthias Kaehlcke <matthias@kaehlcke.net> + */ + +#include <linux/kernel.h> +#include <linux/backlight.h> +#include <linux/err.h> +#include <linux/fb.h> +#include <linux/mfd/tps65217.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +struct tps65217_bl { + struct tps65217 *tps; + struct device *dev; + struct backlight_device *bl; + bool is_enabled; +}; + +static int tps65217_bl_enable(struct tps65217_bl *tps65217_bl) +{ + int rc; + + rc = tps65217_set_bits(tps65217_bl->tps, TPS65217_REG_WLEDCTRL1, + TPS65217_WLEDCTRL1_ISINK_ENABLE, + TPS65217_WLEDCTRL1_ISINK_ENABLE, TPS65217_PROTECT_NONE); + if (rc) { + dev_err(tps65217_bl->dev, + "failed to enable backlight: %d\n", rc); + return rc; + } + + tps65217_bl->is_enabled = true; + + dev_dbg(tps65217_bl->dev, "backlight enabled\n"); + + return 0; +} + +static int tps65217_bl_disable(struct tps65217_bl *tps65217_bl) +{ + int rc; + + rc = tps65217_clear_bits(tps65217_bl->tps, + TPS65217_REG_WLEDCTRL1, + TPS65217_WLEDCTRL1_ISINK_ENABLE, + TPS65217_PROTECT_NONE); + if (rc) { + dev_err(tps65217_bl->dev, + "failed to disable backlight: %d\n", rc); + return rc; + } + + tps65217_bl->is_enabled = false; + + dev_dbg(tps65217_bl->dev, "backlight disabled\n"); + + return 0; +} + +static int tps65217_bl_update_status(struct backlight_device *bl) +{ + struct tps65217_bl *tps65217_bl = bl_get_data(bl); + int rc; + int brightness = backlight_get_brightness(bl); + + if (brightness > 0) { + rc = tps65217_reg_write(tps65217_bl->tps, + TPS65217_REG_WLEDCTRL2, + brightness - 1, + TPS65217_PROTECT_NONE); + if (rc) { + dev_err(tps65217_bl->dev, + "failed to set brightness level: %d\n", rc); + return rc; + } + + dev_dbg(tps65217_bl->dev, "brightness set to %d\n", brightness); + + if (!tps65217_bl->is_enabled) + rc = tps65217_bl_enable(tps65217_bl); + } else { + rc = tps65217_bl_disable(tps65217_bl); + } + + return rc; +} + +static const struct backlight_ops tps65217_bl_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = tps65217_bl_update_status, +}; + +static int tps65217_bl_hw_init(struct tps65217_bl *tps65217_bl, + struct tps65217_bl_pdata *pdata) +{ + int rc; + + rc = tps65217_bl_disable(tps65217_bl); + if (rc) + return rc; + + switch (pdata->isel) { + case TPS65217_BL_ISET1: + /* select ISET_1 current level */ + rc = tps65217_clear_bits(tps65217_bl->tps, + TPS65217_REG_WLEDCTRL1, + TPS65217_WLEDCTRL1_ISEL, + TPS65217_PROTECT_NONE); + if (rc) { + dev_err(tps65217_bl->dev, + "failed to select ISET1 current level: %d)\n", + rc); + return rc; + } + + dev_dbg(tps65217_bl->dev, "selected ISET1 current level\n"); + + break; + + case TPS65217_BL_ISET2: + /* select ISET2 current level */ + rc = tps65217_set_bits(tps65217_bl->tps, TPS65217_REG_WLEDCTRL1, + TPS65217_WLEDCTRL1_ISEL, + TPS65217_WLEDCTRL1_ISEL, TPS65217_PROTECT_NONE); + if (rc) { + dev_err(tps65217_bl->dev, + "failed to select ISET2 current level: %d\n", + rc); + return rc; + } + + dev_dbg(tps65217_bl->dev, "selected ISET2 current level\n"); + + break; + + default: + dev_err(tps65217_bl->dev, + "invalid value for current level: %d\n", pdata->isel); + return -EINVAL; + } + + /* set PWM frequency */ + rc = tps65217_set_bits(tps65217_bl->tps, + TPS65217_REG_WLEDCTRL1, + TPS65217_WLEDCTRL1_FDIM_MASK, + pdata->fdim, + TPS65217_PROTECT_NONE); + if (rc) { + dev_err(tps65217_bl->dev, + "failed to select PWM dimming frequency: %d\n", + rc); + return rc; + } + + return 0; +} + +#ifdef CONFIG_OF +static struct tps65217_bl_pdata * +tps65217_bl_parse_dt(struct platform_device *pdev) +{ + struct tps65217 *tps = dev_get_drvdata(pdev->dev.parent); + struct device_node *node; + struct tps65217_bl_pdata *pdata, *err; + u32 val; + + node = of_get_child_by_name(tps->dev->of_node, "backlight"); + if (!node) + return ERR_PTR(-ENODEV); + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + err = ERR_PTR(-ENOMEM); + goto err; + } + + pdata->isel = TPS65217_BL_ISET1; + if (!of_property_read_u32(node, "isel", &val)) { + if (val < TPS65217_BL_ISET1 || + val > TPS65217_BL_ISET2) { + dev_err(&pdev->dev, + "invalid 'isel' value in the device tree\n"); + err = ERR_PTR(-EINVAL); + goto err; + } + + pdata->isel = val; + } + + pdata->fdim = TPS65217_BL_FDIM_200HZ; + if (!of_property_read_u32(node, "fdim", &val)) { + switch (val) { + case 100: + pdata->fdim = TPS65217_BL_FDIM_100HZ; + break; + + case 200: + pdata->fdim = TPS65217_BL_FDIM_200HZ; + break; + + case 500: + pdata->fdim = TPS65217_BL_FDIM_500HZ; + break; + + case 1000: + pdata->fdim = TPS65217_BL_FDIM_1000HZ; + break; + + default: + dev_err(&pdev->dev, + "invalid 'fdim' value in the device tree\n"); + err = ERR_PTR(-EINVAL); + goto err; + } + } + + if (!of_property_read_u32(node, "default-brightness", &val)) { + if (val > 100) { + dev_err(&pdev->dev, + "invalid 'default-brightness' value in the device tree\n"); + err = ERR_PTR(-EINVAL); + goto err; + } + + pdata->dft_brightness = val; + } + + of_node_put(node); + + return pdata; + +err: + of_node_put(node); + + return err; +} +#else +static struct tps65217_bl_pdata * +tps65217_bl_parse_dt(struct platform_device *pdev) +{ + return NULL; +} +#endif + +static int tps65217_bl_probe(struct platform_device *pdev) +{ + int rc; + struct tps65217 *tps = dev_get_drvdata(pdev->dev.parent); + struct tps65217_bl *tps65217_bl; + struct tps65217_bl_pdata *pdata; + struct backlight_properties bl_props; + + pdata = tps65217_bl_parse_dt(pdev); + if (IS_ERR(pdata)) + return PTR_ERR(pdata); + + tps65217_bl = devm_kzalloc(&pdev->dev, sizeof(*tps65217_bl), + GFP_KERNEL); + if (tps65217_bl == NULL) + return -ENOMEM; + + tps65217_bl->tps = tps; + tps65217_bl->dev = &pdev->dev; + tps65217_bl->is_enabled = false; + + rc = tps65217_bl_hw_init(tps65217_bl, pdata); + if (rc) + return rc; + + memset(&bl_props, 0, sizeof(struct backlight_properties)); + bl_props.type = BACKLIGHT_RAW; + bl_props.max_brightness = 100; + + tps65217_bl->bl = devm_backlight_device_register(&pdev->dev, pdev->name, + tps65217_bl->dev, tps65217_bl, + &tps65217_bl_ops, &bl_props); + if (IS_ERR(tps65217_bl->bl)) { + dev_err(tps65217_bl->dev, + "registration of backlight device failed: %d\n", rc); + return PTR_ERR(tps65217_bl->bl); + } + + tps65217_bl->bl->props.brightness = pdata->dft_brightness; + backlight_update_status(tps65217_bl->bl); + platform_set_drvdata(pdev, tps65217_bl); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id tps65217_bl_of_match[] = { + { .compatible = "ti,tps65217-bl", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, tps65217_bl_of_match); +#endif + +static struct platform_driver tps65217_bl_driver = { + .probe = tps65217_bl_probe, + .driver = { + .name = "tps65217-bl", + .of_match_table = of_match_ptr(tps65217_bl_of_match), + }, +}; + +module_platform_driver(tps65217_bl_driver); + +MODULE_DESCRIPTION("TPS65217 Backlight driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Matthias Kaehlcke <matthias@kaehlcke.net>"); diff --git a/drivers/video/backlight/vgg2432a4.c b/drivers/video/backlight/vgg2432a4.c new file mode 100644 index 0000000000..bfc1913e8b --- /dev/null +++ b/drivers/video/backlight/vgg2432a4.c @@ -0,0 +1,263 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* drivers/video/backlight/vgg2432a4.c + * + * VGG2432A4 (ILI9320) LCD controller driver. + * + * Copyright 2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> +*/ + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/fb.h> +#include <linux/init.h> +#include <linux/lcd.h> +#include <linux/module.h> + +#include <linux/spi/spi.h> + +#include <video/ili9320.h> + +#include "ili9320.h" + +/* Device initialisation sequences */ + +static const struct ili9320_reg vgg_init1[] = { + { + .address = ILI9320_POWER1, + .value = ILI9320_POWER1_AP(0) | ILI9320_POWER1_BT(0), + }, { + .address = ILI9320_POWER2, + .value = (ILI9320_POWER2_VC(7) | + ILI9320_POWER2_DC0(0) | ILI9320_POWER2_DC1(0)), + }, { + .address = ILI9320_POWER3, + .value = ILI9320_POWER3_VRH(0), + }, { + .address = ILI9320_POWER4, + .value = ILI9320_POWER4_VREOUT(0), + }, +}; + +static const struct ili9320_reg vgg_init2[] = { + { + .address = ILI9320_POWER1, + .value = (ILI9320_POWER1_AP(3) | ILI9320_POWER1_APE | + ILI9320_POWER1_BT(7) | ILI9320_POWER1_SAP), + }, { + .address = ILI9320_POWER2, + .value = ILI9320_POWER2_VC(7) | ILI9320_POWER2_DC0(3), + } +}; + +static const struct ili9320_reg vgg_gamma[] = { + { + .address = ILI9320_GAMMA1, + .value = 0x0000, + }, { + .address = ILI9320_GAMMA2, + .value = 0x0505, + }, { + .address = ILI9320_GAMMA3, + .value = 0x0004, + }, { + .address = ILI9320_GAMMA4, + .value = 0x0006, + }, { + .address = ILI9320_GAMMA5, + .value = 0x0707, + }, { + .address = ILI9320_GAMMA6, + .value = 0x0105, + }, { + .address = ILI9320_GAMMA7, + .value = 0x0002, + }, { + .address = ILI9320_GAMMA8, + .value = 0x0707, + }, { + .address = ILI9320_GAMMA9, + .value = 0x0704, + }, { + .address = ILI9320_GAMMA10, + .value = 0x807, + } + +}; + +static const struct ili9320_reg vgg_init0[] = { + [0] = { + /* set direction and scan mode gate */ + .address = ILI9320_DRIVER, + .value = ILI9320_DRIVER_SS, + }, { + .address = ILI9320_DRIVEWAVE, + .value = (ILI9320_DRIVEWAVE_MUSTSET | + ILI9320_DRIVEWAVE_EOR | ILI9320_DRIVEWAVE_BC), + }, { + .address = ILI9320_ENTRYMODE, + .value = ILI9320_ENTRYMODE_ID(3) | ILI9320_ENTRYMODE_BGR, + }, { + .address = ILI9320_RESIZING, + .value = 0x0, + }, +}; + + +static int vgg2432a4_lcd_init(struct ili9320 *lcd, + struct ili9320_platdata *cfg) +{ + unsigned int addr; + int ret; + + /* Set VCore before anything else (VGG243237-6UFLWA) */ + ret = ili9320_write(lcd, 0x00e5, 0x8000); + if (ret) + goto err_initial; + + /* Start the oscillator up before we can do anything else. */ + ret = ili9320_write(lcd, ILI9320_OSCILATION, ILI9320_OSCILATION_OSC); + if (ret) + goto err_initial; + + /* must wait at-lesat 10ms after starting */ + mdelay(15); + + ret = ili9320_write_regs(lcd, vgg_init0, ARRAY_SIZE(vgg_init0)); + if (ret != 0) + goto err_initial; + + ili9320_write(lcd, ILI9320_DISPLAY2, cfg->display2); + ili9320_write(lcd, ILI9320_DISPLAY3, cfg->display3); + ili9320_write(lcd, ILI9320_DISPLAY4, cfg->display4); + + ili9320_write(lcd, ILI9320_RGB_IF1, cfg->rgb_if1); + ili9320_write(lcd, ILI9320_FRAMEMAKER, 0x0); + ili9320_write(lcd, ILI9320_RGB_IF2, cfg->rgb_if2); + + ret = ili9320_write_regs(lcd, vgg_init1, ARRAY_SIZE(vgg_init1)); + if (ret != 0) + goto err_vgg; + + mdelay(300); + + ret = ili9320_write_regs(lcd, vgg_init2, ARRAY_SIZE(vgg_init2)); + if (ret != 0) + goto err_vgg2; + + mdelay(100); + + ili9320_write(lcd, ILI9320_POWER3, 0x13c); + + mdelay(100); + + ili9320_write(lcd, ILI9320_POWER4, 0x1c00); + ili9320_write(lcd, ILI9320_POWER7, 0x000e); + + mdelay(100); + + ili9320_write(lcd, ILI9320_GRAM_HORIZ_ADDR, 0x00); + ili9320_write(lcd, ILI9320_GRAM_VERT_ADD, 0x00); + + ret = ili9320_write_regs(lcd, vgg_gamma, ARRAY_SIZE(vgg_gamma)); + if (ret != 0) + goto err_vgg3; + + ili9320_write(lcd, ILI9320_HORIZ_START, 0x0); + ili9320_write(lcd, ILI9320_HORIZ_END, cfg->hsize - 1); + ili9320_write(lcd, ILI9320_VERT_START, 0x0); + ili9320_write(lcd, ILI9320_VERT_END, cfg->vsize - 1); + + ili9320_write(lcd, ILI9320_DRIVER2, + ILI9320_DRIVER2_NL(((cfg->vsize - 240) / 8) + 0x1D)); + + ili9320_write(lcd, ILI9320_BASE_IMAGE, 0x1); + ili9320_write(lcd, ILI9320_VERT_SCROLL, 0x00); + + for (addr = ILI9320_PARTIAL1_POSITION; addr <= ILI9320_PARTIAL2_END; + addr++) { + ili9320_write(lcd, addr, 0x0); + } + + ili9320_write(lcd, ILI9320_INTERFACE1, 0x10); + ili9320_write(lcd, ILI9320_INTERFACE2, cfg->interface2); + ili9320_write(lcd, ILI9320_INTERFACE3, cfg->interface3); + ili9320_write(lcd, ILI9320_INTERFACE4, cfg->interface4); + ili9320_write(lcd, ILI9320_INTERFACE5, cfg->interface5); + ili9320_write(lcd, ILI9320_INTERFACE6, cfg->interface6); + + lcd->display1 = (ILI9320_DISPLAY1_D(3) | ILI9320_DISPLAY1_DTE | + ILI9320_DISPLAY1_GON | ILI9320_DISPLAY1_BASEE | + 0x40); + + ili9320_write(lcd, ILI9320_DISPLAY1, lcd->display1); + + return 0; + + err_vgg3: + err_vgg2: + err_vgg: + err_initial: + return ret; +} + +#ifdef CONFIG_PM_SLEEP +static int vgg2432a4_suspend(struct device *dev) +{ + return ili9320_suspend(dev_get_drvdata(dev)); +} +static int vgg2432a4_resume(struct device *dev) +{ + return ili9320_resume(dev_get_drvdata(dev)); +} +#endif + +static struct ili9320_client vgg2432a4_client = { + .name = "VGG2432A4", + .init = vgg2432a4_lcd_init, +}; + +/* Device probe */ + +static int vgg2432a4_probe(struct spi_device *spi) +{ + int ret; + + ret = ili9320_probe_spi(spi, &vgg2432a4_client); + if (ret != 0) { + dev_err(&spi->dev, "failed to initialise ili9320\n"); + return ret; + } + + return 0; +} + +static void vgg2432a4_remove(struct spi_device *spi) +{ + ili9320_remove(spi_get_drvdata(spi)); +} + +static void vgg2432a4_shutdown(struct spi_device *spi) +{ + ili9320_shutdown(spi_get_drvdata(spi)); +} + +static SIMPLE_DEV_PM_OPS(vgg2432a4_pm_ops, vgg2432a4_suspend, vgg2432a4_resume); + +static struct spi_driver vgg2432a4_driver = { + .driver = { + .name = "VGG2432A4", + .pm = &vgg2432a4_pm_ops, + }, + .probe = vgg2432a4_probe, + .remove = vgg2432a4_remove, + .shutdown = vgg2432a4_shutdown, +}; + +module_spi_driver(vgg2432a4_driver); + +MODULE_AUTHOR("Ben Dooks <ben-linux@fluff.org>"); +MODULE_DESCRIPTION("VGG2432A4 LCD Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("spi:VGG2432A4"); diff --git a/drivers/video/backlight/wm831x_bl.c b/drivers/video/backlight/wm831x_bl.c new file mode 100644 index 0000000000..c5aaee205b --- /dev/null +++ b/drivers/video/backlight/wm831x_bl.c @@ -0,0 +1,216 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Backlight driver for Wolfson Microelectronics WM831x PMICs + * + * Copyright 2009 Wolfson Microelectonics plc + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/fb.h> +#include <linux/backlight.h> +#include <linux/slab.h> + +#include <linux/mfd/wm831x/core.h> +#include <linux/mfd/wm831x/pdata.h> +#include <linux/mfd/wm831x/regulator.h> + +struct wm831x_backlight_data { + struct wm831x *wm831x; + int isink_reg; + int current_brightness; +}; + +static int wm831x_backlight_set(struct backlight_device *bl, int brightness) +{ + struct wm831x_backlight_data *data = bl_get_data(bl); + struct wm831x *wm831x = data->wm831x; + int power_up = !data->current_brightness && brightness; + int power_down = data->current_brightness && !brightness; + int ret; + + if (power_up) { + /* Enable the ISINK */ + ret = wm831x_set_bits(wm831x, data->isink_reg, + WM831X_CS1_ENA, WM831X_CS1_ENA); + if (ret < 0) + goto err; + + /* Enable the DC-DC */ + ret = wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, + WM831X_DC4_ENA, WM831X_DC4_ENA); + if (ret < 0) + goto err; + } + + if (power_down) { + /* DCDC first */ + ret = wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, + WM831X_DC4_ENA, 0); + if (ret < 0) + goto err; + + /* ISINK */ + ret = wm831x_set_bits(wm831x, data->isink_reg, + WM831X_CS1_DRIVE | WM831X_CS1_ENA, 0); + if (ret < 0) + goto err; + } + + /* Set the new brightness */ + ret = wm831x_set_bits(wm831x, data->isink_reg, + WM831X_CS1_ISEL_MASK, brightness); + if (ret < 0) + goto err; + + if (power_up) { + /* Drive current through the ISINK */ + ret = wm831x_set_bits(wm831x, data->isink_reg, + WM831X_CS1_DRIVE, WM831X_CS1_DRIVE); + if (ret < 0) + return ret; + } + + data->current_brightness = brightness; + + return 0; + +err: + /* If we were in the middle of a power transition always shut down + * for safety. + */ + if (power_up || power_down) { + wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, WM831X_DC4_ENA, 0); + wm831x_set_bits(wm831x, data->isink_reg, WM831X_CS1_ENA, 0); + } + + return ret; +} + +static int wm831x_backlight_update_status(struct backlight_device *bl) +{ + return wm831x_backlight_set(bl, backlight_get_brightness(bl)); +} + +static int wm831x_backlight_get_brightness(struct backlight_device *bl) +{ + struct wm831x_backlight_data *data = bl_get_data(bl); + + return data->current_brightness; +} + +static const struct backlight_ops wm831x_backlight_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = wm831x_backlight_update_status, + .get_brightness = wm831x_backlight_get_brightness, +}; + +static int wm831x_backlight_probe(struct platform_device *pdev) +{ + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); + struct wm831x_pdata *wm831x_pdata = dev_get_platdata(pdev->dev.parent); + struct wm831x_backlight_pdata *pdata; + struct wm831x_backlight_data *data; + struct backlight_device *bl; + struct backlight_properties props; + int ret, i, max_isel, isink_reg, dcdc_cfg; + + /* We need platform data */ + if (wm831x_pdata) + pdata = wm831x_pdata->backlight; + else + pdata = NULL; + + if (!pdata) { + dev_err(&pdev->dev, "No platform data supplied\n"); + return -EINVAL; + } + + /* Figure out the maximum current we can use */ + for (i = 0; i < WM831X_ISINK_MAX_ISEL; i++) { + if (wm831x_isinkv_values[i] > pdata->max_uA) + break; + } + + if (i == 0) { + dev_err(&pdev->dev, "Invalid max_uA: %duA\n", pdata->max_uA); + return -EINVAL; + } + max_isel = i - 1; + + if (pdata->max_uA != wm831x_isinkv_values[max_isel]) + dev_warn(&pdev->dev, + "Maximum current is %duA not %duA as requested\n", + wm831x_isinkv_values[max_isel], pdata->max_uA); + + switch (pdata->isink) { + case 1: + isink_reg = WM831X_CURRENT_SINK_1; + dcdc_cfg = 0; + break; + case 2: + isink_reg = WM831X_CURRENT_SINK_2; + dcdc_cfg = WM831X_DC4_FBSRC; + break; + default: + dev_err(&pdev->dev, "Invalid ISINK %d\n", pdata->isink); + return -EINVAL; + } + + /* Configure the ISINK to use for feedback */ + ret = wm831x_reg_unlock(wm831x); + if (ret < 0) + return ret; + + ret = wm831x_set_bits(wm831x, WM831X_DC4_CONTROL, WM831X_DC4_FBSRC, + dcdc_cfg); + + wm831x_reg_lock(wm831x); + if (ret < 0) + return ret; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (data == NULL) + return -ENOMEM; + + data->wm831x = wm831x; + data->current_brightness = 0; + data->isink_reg = isink_reg; + + memset(&props, 0, sizeof(props)); + props.type = BACKLIGHT_RAW; + props.max_brightness = max_isel; + bl = devm_backlight_device_register(&pdev->dev, "wm831x", &pdev->dev, + data, &wm831x_backlight_ops, &props); + if (IS_ERR(bl)) { + dev_err(&pdev->dev, "failed to register backlight\n"); + return PTR_ERR(bl); + } + + bl->props.brightness = max_isel; + + platform_set_drvdata(pdev, bl); + + /* Disable the DCDC if it was started so we can bootstrap */ + wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, WM831X_DC4_ENA, 0); + + backlight_update_status(bl); + + return 0; +} + +static struct platform_driver wm831x_backlight_driver = { + .driver = { + .name = "wm831x-backlight", + }, + .probe = wm831x_backlight_probe, +}; + +module_platform_driver(wm831x_backlight_driver); + +MODULE_DESCRIPTION("Backlight Driver for WM831x PMICs"); +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:wm831x-backlight"); |