diff options
Diffstat (limited to 'drivers/video/fbdev/fsl-diu-fb.c')
| -rw-r--r-- | drivers/video/fbdev/fsl-diu-fb.c | 1994 |
1 files changed, 1994 insertions, 0 deletions
diff --git a/drivers/video/fbdev/fsl-diu-fb.c b/drivers/video/fbdev/fsl-diu-fb.c new file mode 100644 index 0000000000..0bced82fa4 --- /dev/null +++ b/drivers/video/fbdev/fsl-diu-fb.c @@ -0,0 +1,1994 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * + * Freescale DIU Frame Buffer device driver + * + * Authors: Hongjun Chen <hong-jun.chen@freescale.com> + * Paul Widmer <paul.widmer@freescale.com> + * Srikanth Srinivasan <srikanth.srinivasan@freescale.com> + * York Sun <yorksun@freescale.com> + * + * Based on imxfb.c Copyright (C) 2004 S.Hauer, Pengutronix + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/fb.h> +#include <linux/init.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/clk.h> +#include <linux/uaccess.h> +#include <linux/vmalloc.h> +#include <linux/spinlock.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> + +#include <sysdev/fsl_soc.h> +#include <linux/fsl-diu-fb.h> +#include "edid.h" + +#define NUM_AOIS 5 /* 1 for plane 0, 2 for planes 1 & 2 each */ + +/* HW cursor parameters */ +#define MAX_CURS 32 + +/* INT_STATUS/INT_MASK field descriptions */ +#define INT_VSYNC 0x01 /* Vsync interrupt */ +#define INT_VSYNC_WB 0x02 /* Vsync interrupt for write back operation */ +#define INT_UNDRUN 0x04 /* Under run exception interrupt */ +#define INT_PARERR 0x08 /* Display parameters error interrupt */ +#define INT_LS_BF_VS 0x10 /* Lines before vsync. interrupt */ + +/* + * List of supported video modes + * + * The first entry is the default video mode. The remain entries are in + * order if increasing resolution and frequency. The 320x240-60 mode is + * the initial AOI for the second and third planes. + */ +static struct fb_videomode fsl_diu_mode_db[] = { + { + .refresh = 60, + .xres = 1024, + .yres = 768, + .pixclock = 15385, + .left_margin = 160, + .right_margin = 24, + .upper_margin = 29, + .lower_margin = 3, + .hsync_len = 136, + .vsync_len = 6, + .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED + }, + { + .refresh = 60, + .xres = 320, + .yres = 240, + .pixclock = 79440, + .left_margin = 16, + .right_margin = 16, + .upper_margin = 16, + .lower_margin = 5, + .hsync_len = 48, + .vsync_len = 1, + .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED + }, + { + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 39722, + .left_margin = 48, + .right_margin = 16, + .upper_margin = 33, + .lower_margin = 10, + .hsync_len = 96, + .vsync_len = 2, + .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED + }, + { + .refresh = 72, + .xres = 640, + .yres = 480, + .pixclock = 32052, + .left_margin = 128, + .right_margin = 24, + .upper_margin = 28, + .lower_margin = 9, + .hsync_len = 40, + .vsync_len = 3, + .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED + }, + { + .refresh = 75, + .xres = 640, + .yres = 480, + .pixclock = 31747, + .left_margin = 120, + .right_margin = 16, + .upper_margin = 16, + .lower_margin = 1, + .hsync_len = 64, + .vsync_len = 3, + .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED + }, + { + .refresh = 90, + .xres = 640, + .yres = 480, + .pixclock = 25057, + .left_margin = 120, + .right_margin = 32, + .upper_margin = 14, + .lower_margin = 25, + .hsync_len = 40, + .vsync_len = 14, + .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED + }, + { + .refresh = 100, + .xres = 640, + .yres = 480, + .pixclock = 22272, + .left_margin = 48, + .right_margin = 32, + .upper_margin = 17, + .lower_margin = 22, + .hsync_len = 128, + .vsync_len = 12, + .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED + }, + { + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = 33805, + .left_margin = 96, + .right_margin = 24, + .upper_margin = 10, + .lower_margin = 3, + .hsync_len = 72, + .vsync_len = 7, + .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED + }, + { + .refresh = 60, + .xres = 800, + .yres = 600, + .pixclock = 25000, + .left_margin = 88, + .right_margin = 40, + .upper_margin = 23, + .lower_margin = 1, + .hsync_len = 128, + .vsync_len = 4, + .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED + }, + { + .refresh = 60, + .xres = 854, + .yres = 480, + .pixclock = 31518, + .left_margin = 104, + .right_margin = 16, + .upper_margin = 13, + .lower_margin = 1, + .hsync_len = 88, + .vsync_len = 3, + .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED + }, + { + .refresh = 70, + .xres = 1024, + .yres = 768, + .pixclock = 16886, + .left_margin = 3, + .right_margin = 3, + .upper_margin = 2, + .lower_margin = 2, + .hsync_len = 40, + .vsync_len = 18, + .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED + }, + { + .refresh = 75, + .xres = 1024, + .yres = 768, + .pixclock = 15009, + .left_margin = 3, + .right_margin = 3, + .upper_margin = 2, + .lower_margin = 2, + .hsync_len = 80, + .vsync_len = 32, + .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED + }, + { + .refresh = 60, + .xres = 1280, + .yres = 480, + .pixclock = 18939, + .left_margin = 353, + .right_margin = 47, + .upper_margin = 39, + .lower_margin = 4, + .hsync_len = 8, + .vsync_len = 2, + .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED + }, + { + .refresh = 60, + .xres = 1280, + .yres = 720, + .pixclock = 13426, + .left_margin = 192, + .right_margin = 64, + .upper_margin = 22, + .lower_margin = 1, + .hsync_len = 136, + .vsync_len = 3, + .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED + }, + { + .refresh = 60, + .xres = 1280, + .yres = 1024, + .pixclock = 9375, + .left_margin = 38, + .right_margin = 128, + .upper_margin = 2, + .lower_margin = 7, + .hsync_len = 216, + .vsync_len = 37, + .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED + }, + { + .refresh = 70, + .xres = 1280, + .yres = 1024, + .pixclock = 9380, + .left_margin = 6, + .right_margin = 6, + .upper_margin = 4, + .lower_margin = 4, + .hsync_len = 60, + .vsync_len = 94, + .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED + }, + { + .refresh = 75, + .xres = 1280, + .yres = 1024, + .pixclock = 9380, + .left_margin = 6, + .right_margin = 6, + .upper_margin = 4, + .lower_margin = 4, + .hsync_len = 60, + .vsync_len = 15, + .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED + }, + { + .refresh = 60, + .xres = 1920, + .yres = 1080, + .pixclock = 5787, + .left_margin = 328, + .right_margin = 120, + .upper_margin = 34, + .lower_margin = 1, + .hsync_len = 208, + .vsync_len = 3, + .sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED + }, +}; + +static char *fb_mode; +static unsigned long default_bpp = 32; +static enum fsl_diu_monitor_port monitor_port; +static char *monitor_string; + +#if defined(CONFIG_NOT_COHERENT_CACHE) +static u8 *coherence_data; +static size_t coherence_data_size; +static unsigned int d_cache_line_size; +#endif + +static DEFINE_SPINLOCK(diu_lock); + +enum mfb_index { + PLANE0 = 0, /* Plane 0, only one AOI that fills the screen */ + PLANE1_AOI0, /* Plane 1, first AOI */ + PLANE1_AOI1, /* Plane 1, second AOI */ + PLANE2_AOI0, /* Plane 2, first AOI */ + PLANE2_AOI1, /* Plane 2, second AOI */ +}; + +struct mfb_info { + enum mfb_index index; + char *id; + int registered; + unsigned long pseudo_palette[16]; + struct diu_ad *ad; + unsigned char g_alpha; + unsigned int count; + int x_aoi_d; /* aoi display x offset to physical screen */ + int y_aoi_d; /* aoi display y offset to physical screen */ + struct fsl_diu_data *parent; +}; + +/** + * struct fsl_diu_data - per-DIU data structure + * @dma_addr: DMA address of this structure + * @fsl_diu_info: fb_info objects, one per AOI + * @dev_attr: sysfs structure + * @irq: IRQ + * @monitor_port: the monitor port this DIU is connected to + * @diu_reg: pointer to the DIU hardware registers + * @reg_lock: spinlock for register access + * @dummy_aoi: video buffer for the 4x4 32-bit dummy AOI + * dummy_ad: DIU Area Descriptor for the dummy AOI + * @ad[]: Area Descriptors for each real AOI + * @gamma: gamma color table + * @cursor: hardware cursor data + * @blank_cursor: blank cursor for hiding cursor + * @next_cursor: scratch space to build load cursor + * @edid_data: EDID information buffer + * @has_edid: whether or not the EDID buffer is valid + * + * This data structure must be allocated with 32-byte alignment, so that the + * internal fields can be aligned properly. + */ +struct fsl_diu_data { + dma_addr_t dma_addr; + struct fb_info fsl_diu_info[NUM_AOIS]; + struct mfb_info mfb[NUM_AOIS]; + struct device_attribute dev_attr; + unsigned int irq; + enum fsl_diu_monitor_port monitor_port; + struct diu __iomem *diu_reg; + spinlock_t reg_lock; + u8 dummy_aoi[4 * 4 * 4]; + struct diu_ad dummy_ad __aligned(8); + struct diu_ad ad[NUM_AOIS] __aligned(8); + u8 gamma[256 * 3] __aligned(32); + /* It's easier to parse the cursor data as little-endian */ + __le16 cursor[MAX_CURS * MAX_CURS] __aligned(32); + /* Blank cursor data -- used to hide the cursor */ + __le16 blank_cursor[MAX_CURS * MAX_CURS] __aligned(32); + /* Scratch cursor data -- used to build new cursor */ + __le16 next_cursor[MAX_CURS * MAX_CURS] __aligned(32); + uint8_t edid_data[EDID_LENGTH]; + bool has_edid; +} __aligned(32); + +/* Determine the DMA address of a member of the fsl_diu_data structure */ +#define DMA_ADDR(p, f) ((p)->dma_addr + offsetof(struct fsl_diu_data, f)) + +static const struct mfb_info mfb_template[] = { + { + .index = PLANE0, + .id = "Panel0", + .registered = 0, + .count = 0, + .x_aoi_d = 0, + .y_aoi_d = 0, + }, + { + .index = PLANE1_AOI0, + .id = "Panel1 AOI0", + .registered = 0, + .g_alpha = 0xff, + .count = 0, + .x_aoi_d = 0, + .y_aoi_d = 0, + }, + { + .index = PLANE1_AOI1, + .id = "Panel1 AOI1", + .registered = 0, + .g_alpha = 0xff, + .count = 0, + .x_aoi_d = 0, + .y_aoi_d = 480, + }, + { + .index = PLANE2_AOI0, + .id = "Panel2 AOI0", + .registered = 0, + .g_alpha = 0xff, + .count = 0, + .x_aoi_d = 640, + .y_aoi_d = 0, + }, + { + .index = PLANE2_AOI1, + .id = "Panel2 AOI1", + .registered = 0, + .g_alpha = 0xff, + .count = 0, + .x_aoi_d = 640, + .y_aoi_d = 480, + }, +}; + +#ifdef DEBUG +static void __attribute__ ((unused)) fsl_diu_dump(struct diu __iomem *hw) +{ + mb(); + pr_debug("DIU: desc=%08x,%08x,%08x, gamma=%08x palette=%08x " + "cursor=%08x curs_pos=%08x diu_mode=%08x bgnd=%08x " + "disp_size=%08x hsyn_para=%08x vsyn_para=%08x syn_pol=%08x " + "thresholds=%08x int_mask=%08x plut=%08x\n", + hw->desc[0], hw->desc[1], hw->desc[2], hw->gamma, + hw->palette, hw->cursor, hw->curs_pos, hw->diu_mode, + hw->bgnd, hw->disp_size, hw->hsyn_para, hw->vsyn_para, + hw->syn_pol, hw->thresholds, hw->int_mask, hw->plut); + rmb(); +} +#endif + +/** + * fsl_diu_name_to_port - convert a port name to a monitor port enum + * + * Takes the name of a monitor port ("dvi", "lvds", or "dlvds") and returns + * the enum fsl_diu_monitor_port that corresponds to that string. + * + * For compatibility with older versions, a number ("0", "1", or "2") is also + * supported. + * + * If the string is unknown, DVI is assumed. + * + * If the particular port is not supported by the platform, another port + * (platform-specific) is chosen instead. + */ +static enum fsl_diu_monitor_port fsl_diu_name_to_port(const char *s) +{ + enum fsl_diu_monitor_port port = FSL_DIU_PORT_DVI; + unsigned long val; + + if (s) { + if (!kstrtoul(s, 10, &val) && (val <= 2)) + port = (enum fsl_diu_monitor_port) val; + else if (strncmp(s, "lvds", 4) == 0) + port = FSL_DIU_PORT_LVDS; + else if (strncmp(s, "dlvds", 5) == 0) + port = FSL_DIU_PORT_DLVDS; + } + + if (diu_ops.valid_monitor_port) + port = diu_ops.valid_monitor_port(port); + + return port; +} + +/* + * Workaround for failed writing desc register of planes. + * Needed with MPC5121 DIU rev 2.0 silicon. + */ +static void wr_reg_wa(u32 *reg, u32 val) +{ + do { + out_be32(reg, val); + } while (in_be32(reg) != val); +} + +static void fsl_diu_enable_panel(struct fb_info *info) +{ + struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par; + struct diu_ad *ad = mfbi->ad; + struct fsl_diu_data *data = mfbi->parent; + struct diu __iomem *hw = data->diu_reg; + + switch (mfbi->index) { + case PLANE0: + wr_reg_wa(&hw->desc[0], ad->paddr); + break; + case PLANE1_AOI0: + cmfbi = &data->mfb[2]; + if (hw->desc[1] != ad->paddr) { /* AOI0 closed */ + if (cmfbi->count > 0) /* AOI1 open */ + ad->next_ad = + cpu_to_le32(cmfbi->ad->paddr); + else + ad->next_ad = 0; + wr_reg_wa(&hw->desc[1], ad->paddr); + } + break; + case PLANE2_AOI0: + cmfbi = &data->mfb[4]; + if (hw->desc[2] != ad->paddr) { /* AOI0 closed */ + if (cmfbi->count > 0) /* AOI1 open */ + ad->next_ad = + cpu_to_le32(cmfbi->ad->paddr); + else + ad->next_ad = 0; + wr_reg_wa(&hw->desc[2], ad->paddr); + } + break; + case PLANE1_AOI1: + pmfbi = &data->mfb[1]; + ad->next_ad = 0; + if (hw->desc[1] == data->dummy_ad.paddr) + wr_reg_wa(&hw->desc[1], ad->paddr); + else /* AOI0 open */ + pmfbi->ad->next_ad = cpu_to_le32(ad->paddr); + break; + case PLANE2_AOI1: + pmfbi = &data->mfb[3]; + ad->next_ad = 0; + if (hw->desc[2] == data->dummy_ad.paddr) + wr_reg_wa(&hw->desc[2], ad->paddr); + else /* AOI0 was open */ + pmfbi->ad->next_ad = cpu_to_le32(ad->paddr); + break; + } +} + +static void fsl_diu_disable_panel(struct fb_info *info) +{ + struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par; + struct diu_ad *ad = mfbi->ad; + struct fsl_diu_data *data = mfbi->parent; + struct diu __iomem *hw = data->diu_reg; + + switch (mfbi->index) { + case PLANE0: + wr_reg_wa(&hw->desc[0], 0); + break; + case PLANE1_AOI0: + cmfbi = &data->mfb[2]; + if (cmfbi->count > 0) /* AOI1 is open */ + wr_reg_wa(&hw->desc[1], cmfbi->ad->paddr); + /* move AOI1 to the first */ + else /* AOI1 was closed */ + wr_reg_wa(&hw->desc[1], data->dummy_ad.paddr); + /* close AOI 0 */ + break; + case PLANE2_AOI0: + cmfbi = &data->mfb[4]; + if (cmfbi->count > 0) /* AOI1 is open */ + wr_reg_wa(&hw->desc[2], cmfbi->ad->paddr); + /* move AOI1 to the first */ + else /* AOI1 was closed */ + wr_reg_wa(&hw->desc[2], data->dummy_ad.paddr); + /* close AOI 0 */ + break; + case PLANE1_AOI1: + pmfbi = &data->mfb[1]; + if (hw->desc[1] != ad->paddr) { + /* AOI1 is not the first in the chain */ + if (pmfbi->count > 0) + /* AOI0 is open, must be the first */ + pmfbi->ad->next_ad = 0; + } else /* AOI1 is the first in the chain */ + wr_reg_wa(&hw->desc[1], data->dummy_ad.paddr); + /* close AOI 1 */ + break; + case PLANE2_AOI1: + pmfbi = &data->mfb[3]; + if (hw->desc[2] != ad->paddr) { + /* AOI1 is not the first in the chain */ + if (pmfbi->count > 0) + /* AOI0 is open, must be the first */ + pmfbi->ad->next_ad = 0; + } else /* AOI1 is the first in the chain */ + wr_reg_wa(&hw->desc[2], data->dummy_ad.paddr); + /* close AOI 1 */ + break; + } +} + +static void enable_lcdc(struct fb_info *info) +{ + struct mfb_info *mfbi = info->par; + struct fsl_diu_data *data = mfbi->parent; + struct diu __iomem *hw = data->diu_reg; + + out_be32(&hw->diu_mode, MFB_MODE1); +} + +static void disable_lcdc(struct fb_info *info) +{ + struct mfb_info *mfbi = info->par; + struct fsl_diu_data *data = mfbi->parent; + struct diu __iomem *hw = data->diu_reg; + + out_be32(&hw->diu_mode, 0); +} + +static void adjust_aoi_size_position(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + struct mfb_info *lower_aoi_mfbi, *upper_aoi_mfbi, *mfbi = info->par; + struct fsl_diu_data *data = mfbi->parent; + int available_height, upper_aoi_bottom; + enum mfb_index index = mfbi->index; + int lower_aoi_is_open, upper_aoi_is_open; + __u32 base_plane_width, base_plane_height, upper_aoi_height; + + base_plane_width = data->fsl_diu_info[0].var.xres; + base_plane_height = data->fsl_diu_info[0].var.yres; + + if (mfbi->x_aoi_d < 0) + mfbi->x_aoi_d = 0; + if (mfbi->y_aoi_d < 0) + mfbi->y_aoi_d = 0; + switch (index) { + case PLANE0: + if (mfbi->x_aoi_d != 0) + mfbi->x_aoi_d = 0; + if (mfbi->y_aoi_d != 0) + mfbi->y_aoi_d = 0; + break; + case PLANE1_AOI0: + case PLANE2_AOI0: + lower_aoi_mfbi = data->fsl_diu_info[index+1].par; + lower_aoi_is_open = lower_aoi_mfbi->count > 0 ? 1 : 0; + if (var->xres > base_plane_width) + var->xres = base_plane_width; + if ((mfbi->x_aoi_d + var->xres) > base_plane_width) + mfbi->x_aoi_d = base_plane_width - var->xres; + + if (lower_aoi_is_open) + available_height = lower_aoi_mfbi->y_aoi_d; + else + available_height = base_plane_height; + if (var->yres > available_height) + var->yres = available_height; + if ((mfbi->y_aoi_d + var->yres) > available_height) + mfbi->y_aoi_d = available_height - var->yres; + break; + case PLANE1_AOI1: + case PLANE2_AOI1: + upper_aoi_mfbi = data->fsl_diu_info[index-1].par; + upper_aoi_height = data->fsl_diu_info[index-1].var.yres; + upper_aoi_bottom = upper_aoi_mfbi->y_aoi_d + upper_aoi_height; + upper_aoi_is_open = upper_aoi_mfbi->count > 0 ? 1 : 0; + if (var->xres > base_plane_width) + var->xres = base_plane_width; + if ((mfbi->x_aoi_d + var->xres) > base_plane_width) + mfbi->x_aoi_d = base_plane_width - var->xres; + if (mfbi->y_aoi_d < 0) + mfbi->y_aoi_d = 0; + if (upper_aoi_is_open) { + if (mfbi->y_aoi_d < upper_aoi_bottom) + mfbi->y_aoi_d = upper_aoi_bottom; + available_height = base_plane_height + - upper_aoi_bottom; + } else + available_height = base_plane_height; + if (var->yres > available_height) + var->yres = available_height; + if ((mfbi->y_aoi_d + var->yres) > base_plane_height) + mfbi->y_aoi_d = base_plane_height - var->yres; + break; + } +} +/* + * Checks to see if the hardware supports the state requested by var passed + * in. This function does not alter the hardware state! If the var passed in + * is slightly off by what the hardware can support then we alter the var + * PASSED in to what we can do. If the hardware doesn't support mode change + * a -EINVAL will be returned by the upper layers. + */ +static int fsl_diu_check_var(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + if (var->xres_virtual < var->xres) + var->xres_virtual = var->xres; + if (var->yres_virtual < var->yres) + var->yres_virtual = var->yres; + + if (var->xoffset + info->var.xres > info->var.xres_virtual) + var->xoffset = info->var.xres_virtual - info->var.xres; + + if (var->yoffset + info->var.yres > info->var.yres_virtual) + var->yoffset = info->var.yres_virtual - info->var.yres; + + if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) && + (var->bits_per_pixel != 16)) + var->bits_per_pixel = default_bpp; + + switch (var->bits_per_pixel) { + case 16: + var->red.length = 5; + var->red.offset = 11; + var->red.msb_right = 0; + + var->green.length = 6; + var->green.offset = 5; + var->green.msb_right = 0; + + var->blue.length = 5; + var->blue.offset = 0; + var->blue.msb_right = 0; + + var->transp.length = 0; + var->transp.offset = 0; + var->transp.msb_right = 0; + break; + case 24: + var->red.length = 8; + var->red.offset = 0; + var->red.msb_right = 0; + + var->green.length = 8; + var->green.offset = 8; + var->green.msb_right = 0; + + var->blue.length = 8; + var->blue.offset = 16; + var->blue.msb_right = 0; + + var->transp.length = 0; + var->transp.offset = 0; + var->transp.msb_right = 0; + break; + case 32: + var->red.length = 8; + var->red.offset = 16; + var->red.msb_right = 0; + + var->green.length = 8; + var->green.offset = 8; + var->green.msb_right = 0; + + var->blue.length = 8; + var->blue.offset = 0; + var->blue.msb_right = 0; + + var->transp.length = 8; + var->transp.offset = 24; + var->transp.msb_right = 0; + + break; + } + + var->height = -1; + var->width = -1; + var->grayscale = 0; + + /* Copy nonstd field to/from sync for fbset usage */ + var->sync |= var->nonstd; + var->nonstd |= var->sync; + + adjust_aoi_size_position(var, info); + return 0; +} + +static void set_fix(struct fb_info *info) +{ + struct fb_fix_screeninfo *fix = &info->fix; + struct fb_var_screeninfo *var = &info->var; + struct mfb_info *mfbi = info->par; + + strncpy(fix->id, mfbi->id, sizeof(fix->id)); + fix->line_length = var->xres_virtual * var->bits_per_pixel / 8; + fix->type = FB_TYPE_PACKED_PIXELS; + fix->accel = FB_ACCEL_NONE; + fix->visual = FB_VISUAL_TRUECOLOR; + fix->xpanstep = 1; + fix->ypanstep = 1; +} + +static void update_lcdc(struct fb_info *info) +{ + struct fb_var_screeninfo *var = &info->var; + struct mfb_info *mfbi = info->par; + struct fsl_diu_data *data = mfbi->parent; + struct diu __iomem *hw; + int i, j; + u8 *gamma_table_base; + + u32 temp; + + hw = data->diu_reg; + + if (diu_ops.set_monitor_port) + diu_ops.set_monitor_port(data->monitor_port); + gamma_table_base = data->gamma; + + /* Prep for DIU init - gamma table, cursor table */ + + for (i = 0; i <= 2; i++) + for (j = 0; j <= 255; j++) + *gamma_table_base++ = j; + + if (diu_ops.set_gamma_table) + diu_ops.set_gamma_table(data->monitor_port, data->gamma); + + disable_lcdc(info); + + /* Program DIU registers */ + + out_be32(&hw->gamma, DMA_ADDR(data, gamma)); + + out_be32(&hw->bgnd, 0x007F7F7F); /* Set background to grey */ + out_be32(&hw->disp_size, (var->yres << 16) | var->xres); + + /* Horizontal and vertical configuration register */ + temp = var->left_margin << 22 | /* BP_H */ + var->hsync_len << 11 | /* PW_H */ + var->right_margin; /* FP_H */ + + out_be32(&hw->hsyn_para, temp); + + temp = var->upper_margin << 22 | /* BP_V */ + var->vsync_len << 11 | /* PW_V */ + var->lower_margin; /* FP_V */ + + out_be32(&hw->vsyn_para, temp); + + diu_ops.set_pixel_clock(var->pixclock); + +#ifndef CONFIG_PPC_MPC512x + /* + * The PLUT register is defined differently on the MPC5121 than it + * is on other SOCs. Unfortunately, there's no documentation that + * explains how it's supposed to be programmed, so for now, we leave + * it at the default value on the MPC5121. + * + * For other SOCs, program it for the highest priority, which will + * reduce the chance of underrun. Technically, we should scale the + * priority to match the screen resolution, but doing that properly + * requires delicate fine-tuning for each use-case. + */ + out_be32(&hw->plut, 0x01F5F666); +#endif + + /* Enable the DIU */ + enable_lcdc(info); +} + +static int map_video_memory(struct fb_info *info) +{ + u32 smem_len = info->fix.line_length * info->var.yres_virtual; + void *p; + + p = alloc_pages_exact(smem_len, GFP_DMA | __GFP_ZERO); + if (!p) { + fb_err(info, "unable to allocate fb memory\n"); + return -ENOMEM; + } + mutex_lock(&info->mm_lock); + info->screen_base = p; + info->fix.smem_start = virt_to_phys(info->screen_base); + info->fix.smem_len = smem_len; + mutex_unlock(&info->mm_lock); + info->screen_size = info->fix.smem_len; + + return 0; +} + +static void unmap_video_memory(struct fb_info *info) +{ + void *p = info->screen_base; + size_t l = info->fix.smem_len; + + mutex_lock(&info->mm_lock); + info->screen_base = NULL; + info->fix.smem_start = 0; + info->fix.smem_len = 0; + mutex_unlock(&info->mm_lock); + + if (p) + free_pages_exact(p, l); +} + +/* + * Using the fb_var_screeninfo in fb_info we set the aoi of this + * particular framebuffer. It is a light version of fsl_diu_set_par. + */ +static int fsl_diu_set_aoi(struct fb_info *info) +{ + struct fb_var_screeninfo *var = &info->var; + struct mfb_info *mfbi = info->par; + struct diu_ad *ad = mfbi->ad; + + /* AOI should not be greater than display size */ + ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset); + ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d); + return 0; +} + +/** + * fsl_diu_get_pixel_format: return the pixel format for a given color depth + * + * The pixel format is a 32-bit value that determine which bits in each + * pixel are to be used for each color. This is the default function used + * if the platform does not define its own version. + */ +static u32 fsl_diu_get_pixel_format(unsigned int bits_per_pixel) +{ +#define PF_BYTE_F 0x10000000 +#define PF_ALPHA_C_MASK 0x0E000000 +#define PF_ALPHA_C_SHIFT 25 +#define PF_BLUE_C_MASK 0x01800000 +#define PF_BLUE_C_SHIFT 23 +#define PF_GREEN_C_MASK 0x00600000 +#define PF_GREEN_C_SHIFT 21 +#define PF_RED_C_MASK 0x00180000 +#define PF_RED_C_SHIFT 19 +#define PF_PALETTE 0x00040000 +#define PF_PIXEL_S_MASK 0x00030000 +#define PF_PIXEL_S_SHIFT 16 +#define PF_COMP_3_MASK 0x0000F000 +#define PF_COMP_3_SHIFT 12 +#define PF_COMP_2_MASK 0x00000F00 +#define PF_COMP_2_SHIFT 8 +#define PF_COMP_1_MASK 0x000000F0 +#define PF_COMP_1_SHIFT 4 +#define PF_COMP_0_MASK 0x0000000F +#define PF_COMP_0_SHIFT 0 + +#define MAKE_PF(alpha, red, green, blue, size, c0, c1, c2, c3) \ + cpu_to_le32(PF_BYTE_F | (alpha << PF_ALPHA_C_SHIFT) | \ + (blue << PF_BLUE_C_SHIFT) | (green << PF_GREEN_C_SHIFT) | \ + (red << PF_RED_C_SHIFT) | (c3 << PF_COMP_3_SHIFT) | \ + (c2 << PF_COMP_2_SHIFT) | (c1 << PF_COMP_1_SHIFT) | \ + (c0 << PF_COMP_0_SHIFT) | (size << PF_PIXEL_S_SHIFT)) + + switch (bits_per_pixel) { + case 32: + /* 0x88883316 */ + return MAKE_PF(3, 2, 1, 0, 3, 8, 8, 8, 8); + case 24: + /* 0x88082219 */ + return MAKE_PF(4, 0, 1, 2, 2, 8, 8, 8, 0); + case 16: + /* 0x65053118 */ + return MAKE_PF(4, 2, 1, 0, 1, 5, 6, 5, 0); + default: + pr_err("fsl-diu: unsupported color depth %u\n", bits_per_pixel); + return 0; + } +} + +/* + * Copies a cursor image from user space to the proper place in driver + * memory so that the hardware can display the cursor image. + * + * Cursor data is represented as a sequence of 'width' bits packed into bytes. + * That is, the first 8 bits are in the first byte, the second 8 bits in the + * second byte, and so on. Therefore, the each row of the cursor is (width + + * 7) / 8 bytes of 'data' + * + * The DIU only supports cursors up to 32x32 (MAX_CURS). We reject cursors + * larger than this, so we already know that 'width' <= 32. Therefore, we can + * simplify our code by using a 32-bit big-endian integer ("line") to read in + * a single line of pixels, and only look at the top 'width' bits of that + * integer. + * + * This could result in an unaligned 32-bit read. For example, if the cursor + * is 24x24, then the first three bytes of 'image' contain the pixel data for + * the top line of the cursor. We do a 32-bit read of 'image', but we look + * only at the top 24 bits. Then we increment 'image' by 3 bytes. The next + * read is unaligned. The only problem is that we might read past the end of + * 'image' by 1-3 bytes, but that should not cause any problems. + */ +static void fsl_diu_load_cursor_image(struct fb_info *info, + const void *image, uint16_t bg, uint16_t fg, + unsigned int width, unsigned int height) +{ + struct mfb_info *mfbi = info->par; + struct fsl_diu_data *data = mfbi->parent; + __le16 *cursor = data->cursor; + __le16 _fg = cpu_to_le16(fg); + __le16 _bg = cpu_to_le16(bg); + unsigned int h, w; + + for (h = 0; h < height; h++) { + uint32_t mask = 1 << 31; + uint32_t line = be32_to_cpup(image); + + for (w = 0; w < width; w++) { + cursor[w] = (line & mask) ? _fg : _bg; + mask >>= 1; + } + + cursor += MAX_CURS; + image += DIV_ROUND_UP(width, 8); + } +} + +/* + * Set a hardware cursor. The image data for the cursor is passed via the + * fb_cursor object. + */ +static int fsl_diu_cursor(struct fb_info *info, struct fb_cursor *cursor) +{ + struct mfb_info *mfbi = info->par; + struct fsl_diu_data *data = mfbi->parent; + struct diu __iomem *hw = data->diu_reg; + + if (cursor->image.width > MAX_CURS || cursor->image.height > MAX_CURS) + return -EINVAL; + + /* The cursor size has changed */ + if (cursor->set & FB_CUR_SETSIZE) { + /* + * The DIU cursor is a fixed size, so when we get this + * message, instead of resizing the cursor, we just clear + * all the image data, in expectation of new data. However, + * in tests this control does not appear to be normally + * called. + */ + memset(data->cursor, 0, sizeof(data->cursor)); + } + + /* The cursor position has changed (cursor->image.dx|dy) */ + if (cursor->set & FB_CUR_SETPOS) { + uint32_t xx, yy; + + yy = (cursor->image.dy - info->var.yoffset) & 0x7ff; + xx = (cursor->image.dx - info->var.xoffset) & 0x7ff; + + out_be32(&hw->curs_pos, yy << 16 | xx); + } + + /* + * FB_CUR_SETIMAGE - the cursor image has changed + * FB_CUR_SETCMAP - the cursor colors has changed + * FB_CUR_SETSHAPE - the cursor bitmask has changed + */ + if (cursor->set & (FB_CUR_SETSHAPE | FB_CUR_SETCMAP | FB_CUR_SETIMAGE)) { + /* + * Determine the size of the cursor image data. Normally, + * it's 8x16. + */ + unsigned int image_size = + DIV_ROUND_UP(cursor->image.width, 8) * + cursor->image.height; + unsigned int image_words = + DIV_ROUND_UP(image_size, sizeof(uint32_t)); + unsigned int bg_idx = cursor->image.bg_color; + unsigned int fg_idx = cursor->image.fg_color; + uint32_t *image, *source, *mask; + uint16_t fg, bg; + unsigned int i; + + if (info->state != FBINFO_STATE_RUNNING) + return 0; + + bg = ((info->cmap.red[bg_idx] & 0xf8) << 7) | + ((info->cmap.green[bg_idx] & 0xf8) << 2) | + ((info->cmap.blue[bg_idx] & 0xf8) >> 3) | + 1 << 15; + + fg = ((info->cmap.red[fg_idx] & 0xf8) << 7) | + ((info->cmap.green[fg_idx] & 0xf8) << 2) | + ((info->cmap.blue[fg_idx] & 0xf8) >> 3) | + 1 << 15; + + /* Use 32-bit operations on the data to improve performance */ + image = (uint32_t *)data->next_cursor; + source = (uint32_t *)cursor->image.data; + mask = (uint32_t *)cursor->mask; + + if (cursor->rop == ROP_XOR) + for (i = 0; i < image_words; i++) + image[i] = source[i] ^ mask[i]; + else + for (i = 0; i < image_words; i++) + image[i] = source[i] & mask[i]; + + fsl_diu_load_cursor_image(info, image, bg, fg, + cursor->image.width, cursor->image.height); + } + + /* + * Show or hide the cursor. The cursor data is always stored in the + * 'cursor' memory block, and the actual cursor position is always in + * the DIU's CURS_POS register. To hide the cursor, we redirect the + * CURSOR register to a blank cursor. The show the cursor, we + * redirect the CURSOR register to the real cursor data. + */ + if (cursor->enable) + out_be32(&hw->cursor, DMA_ADDR(data, cursor)); + else + out_be32(&hw->cursor, DMA_ADDR(data, blank_cursor)); + + return 0; +} + +/* + * Using the fb_var_screeninfo in fb_info we set the resolution of this + * particular framebuffer. This function alters the fb_fix_screeninfo stored + * in fb_info. It does not alter var in fb_info since we are using that + * data. This means we depend on the data in var inside fb_info to be + * supported by the hardware. fsl_diu_check_var is always called before + * fsl_diu_set_par to ensure this. + */ +static int fsl_diu_set_par(struct fb_info *info) +{ + unsigned long len; + struct fb_var_screeninfo *var = &info->var; + struct mfb_info *mfbi = info->par; + struct fsl_diu_data *data = mfbi->parent; + struct diu_ad *ad = mfbi->ad; + struct diu __iomem *hw; + + hw = data->diu_reg; + + set_fix(info); + + len = info->var.yres_virtual * info->fix.line_length; + /* Alloc & dealloc each time resolution/bpp change */ + if (len != info->fix.smem_len) { + if (info->fix.smem_start) + unmap_video_memory(info); + + /* Memory allocation for framebuffer */ + if (map_video_memory(info)) { + fb_err(info, "unable to allocate fb memory 1\n"); + return -ENOMEM; + } + } + + if (diu_ops.get_pixel_format) + ad->pix_fmt = diu_ops.get_pixel_format(data->monitor_port, + var->bits_per_pixel); + else + ad->pix_fmt = fsl_diu_get_pixel_format(var->bits_per_pixel); + + ad->addr = cpu_to_le32(info->fix.smem_start); + ad->src_size_g_alpha = cpu_to_le32((var->yres_virtual << 12) | + var->xres_virtual) | mfbi->g_alpha; + /* AOI should not be greater than display size */ + ad->aoi_size = cpu_to_le32((var->yres << 16) | var->xres); + ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset); + ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d); + + /* Disable chroma keying function */ + ad->ckmax_r = 0; + ad->ckmax_g = 0; + ad->ckmax_b = 0; + + ad->ckmin_r = 255; + ad->ckmin_g = 255; + ad->ckmin_b = 255; + + if (mfbi->index == PLANE0) + update_lcdc(info); + return 0; +} + +static inline __u32 CNVT_TOHW(__u32 val, __u32 width) +{ + return ((val << width) + 0x7FFF - val) >> 16; +} + +/* + * Set a single color register. The values supplied have a 16 bit magnitude + * which needs to be scaled in this function for the hardware. Things to take + * into consideration are how many color registers, if any, are supported with + * the current color visual. With truecolor mode no color palettes are + * supported. Here a pseudo palette is created which we store the value in + * pseudo_palette in struct fb_info. For pseudocolor mode we have a limited + * color palette. + */ +static int fsl_diu_setcolreg(unsigned int regno, unsigned int red, + unsigned int green, unsigned int blue, + unsigned int transp, struct fb_info *info) +{ + int ret = 1; + + /* + * If greyscale is true, then we convert the RGB value + * to greyscale no matter what visual we are using. + */ + if (info->var.grayscale) + red = green = blue = (19595 * red + 38470 * green + + 7471 * blue) >> 16; + switch (info->fix.visual) { + case FB_VISUAL_TRUECOLOR: + /* + * 16-bit True Colour. We encode the RGB value + * according to the RGB bitfield information. + */ + if (regno < 16) { + u32 *pal = info->pseudo_palette; + u32 v; + + red = CNVT_TOHW(red, info->var.red.length); + green = CNVT_TOHW(green, info->var.green.length); + blue = CNVT_TOHW(blue, info->var.blue.length); + transp = CNVT_TOHW(transp, info->var.transp.length); + + v = (red << info->var.red.offset) | + (green << info->var.green.offset) | + (blue << info->var.blue.offset) | + (transp << info->var.transp.offset); + + pal[regno] = v; + ret = 0; + } + break; + } + + return ret; +} + +/* + * Pan (or wrap, depending on the `vmode' field) the display using the + * 'xoffset' and 'yoffset' fields of the 'var' structure. If the values + * don't fit, return -EINVAL. + */ +static int fsl_diu_pan_display(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + if ((info->var.xoffset == var->xoffset) && + (info->var.yoffset == var->yoffset)) + return 0; /* No change, do nothing */ + + if (var->xoffset + info->var.xres > info->var.xres_virtual + || var->yoffset + info->var.yres > info->var.yres_virtual) + return -EINVAL; + + info->var.xoffset = var->xoffset; + info->var.yoffset = var->yoffset; + + if (var->vmode & FB_VMODE_YWRAP) + info->var.vmode |= FB_VMODE_YWRAP; + else + info->var.vmode &= ~FB_VMODE_YWRAP; + + fsl_diu_set_aoi(info); + + return 0; +} + +static int fsl_diu_ioctl(struct fb_info *info, unsigned int cmd, + unsigned long arg) +{ + struct mfb_info *mfbi = info->par; + struct diu_ad *ad = mfbi->ad; + struct mfb_chroma_key ck; + unsigned char global_alpha; + struct aoi_display_offset aoi_d; + __u32 pix_fmt; + void __user *buf = (void __user *)arg; + + if (!arg) + return -EINVAL; + + fb_dbg(info, "ioctl %08x (dir=%s%s type=%u nr=%u size=%u)\n", cmd, + _IOC_DIR(cmd) & _IOC_READ ? "R" : "", + _IOC_DIR(cmd) & _IOC_WRITE ? "W" : "", + _IOC_TYPE(cmd), _IOC_NR(cmd), _IOC_SIZE(cmd)); + + switch (cmd) { + case MFB_SET_PIXFMT_OLD: + fb_warn(info, + "MFB_SET_PIXFMT value of 0x%08x is deprecated.\n", + MFB_SET_PIXFMT_OLD); + fallthrough; + case MFB_SET_PIXFMT: + if (copy_from_user(&pix_fmt, buf, sizeof(pix_fmt))) + return -EFAULT; + ad->pix_fmt = pix_fmt; + break; + case MFB_GET_PIXFMT_OLD: + fb_warn(info, + "MFB_GET_PIXFMT value of 0x%08x is deprecated.\n", + MFB_GET_PIXFMT_OLD); + fallthrough; + case MFB_GET_PIXFMT: + pix_fmt = ad->pix_fmt; + if (copy_to_user(buf, &pix_fmt, sizeof(pix_fmt))) + return -EFAULT; + break; + case MFB_SET_AOID: + if (copy_from_user(&aoi_d, buf, sizeof(aoi_d))) + return -EFAULT; + mfbi->x_aoi_d = aoi_d.x_aoi_d; + mfbi->y_aoi_d = aoi_d.y_aoi_d; + fsl_diu_check_var(&info->var, info); + fsl_diu_set_aoi(info); + break; + case MFB_GET_AOID: + aoi_d.x_aoi_d = mfbi->x_aoi_d; + aoi_d.y_aoi_d = mfbi->y_aoi_d; + if (copy_to_user(buf, &aoi_d, sizeof(aoi_d))) + return -EFAULT; + break; + case MFB_GET_ALPHA: + global_alpha = mfbi->g_alpha; + if (copy_to_user(buf, &global_alpha, sizeof(global_alpha))) + return -EFAULT; + break; + case MFB_SET_ALPHA: + /* set panel information */ + if (copy_from_user(&global_alpha, buf, sizeof(global_alpha))) + return -EFAULT; + ad->src_size_g_alpha = (ad->src_size_g_alpha & (~0xff)) | + (global_alpha & 0xff); + mfbi->g_alpha = global_alpha; + break; + case MFB_SET_CHROMA_KEY: + /* set panel winformation */ + if (copy_from_user(&ck, buf, sizeof(ck))) + return -EFAULT; + + if (ck.enable && + (ck.red_max < ck.red_min || + ck.green_max < ck.green_min || + ck.blue_max < ck.blue_min)) + return -EINVAL; + + if (!ck.enable) { + ad->ckmax_r = 0; + ad->ckmax_g = 0; + ad->ckmax_b = 0; + ad->ckmin_r = 255; + ad->ckmin_g = 255; + ad->ckmin_b = 255; + } else { + ad->ckmax_r = ck.red_max; + ad->ckmax_g = ck.green_max; + ad->ckmax_b = ck.blue_max; + ad->ckmin_r = ck.red_min; + ad->ckmin_g = ck.green_min; + ad->ckmin_b = ck.blue_min; + } + break; +#ifdef CONFIG_PPC_MPC512x + case MFB_SET_GAMMA: { + struct fsl_diu_data *data = mfbi->parent; + + if (copy_from_user(data->gamma, buf, sizeof(data->gamma))) + return -EFAULT; + setbits32(&data->diu_reg->gamma, 0); /* Force table reload */ + break; + } + case MFB_GET_GAMMA: { + struct fsl_diu_data *data = mfbi->parent; + + if (copy_to_user(buf, data->gamma, sizeof(data->gamma))) + return -EFAULT; + break; + } +#endif + default: + fb_err(info, "unknown ioctl command (0x%08X)\n", cmd); + return -ENOIOCTLCMD; + } + + return 0; +} + +static inline void fsl_diu_enable_interrupts(struct fsl_diu_data *data) +{ + u32 int_mask = INT_UNDRUN; /* enable underrun detection */ + + if (IS_ENABLED(CONFIG_NOT_COHERENT_CACHE)) + int_mask |= INT_VSYNC; /* enable vertical sync */ + + clrbits32(&data->diu_reg->int_mask, int_mask); +} + +/* turn on fb if count == 1 + */ +static int fsl_diu_open(struct fb_info *info, int user) +{ + struct mfb_info *mfbi = info->par; + int res = 0; + + /* free boot splash memory on first /dev/fb0 open */ + if ((mfbi->index == PLANE0) && diu_ops.release_bootmem) + diu_ops.release_bootmem(); + + spin_lock(&diu_lock); + mfbi->count++; + if (mfbi->count == 1) { + fsl_diu_check_var(&info->var, info); + res = fsl_diu_set_par(info); + if (res < 0) + mfbi->count--; + else { + fsl_diu_enable_interrupts(mfbi->parent); + fsl_diu_enable_panel(info); + } + } + + spin_unlock(&diu_lock); + return res; +} + +/* turn off fb if count == 0 + */ +static int fsl_diu_release(struct fb_info *info, int user) +{ + struct mfb_info *mfbi = info->par; + + spin_lock(&diu_lock); + mfbi->count--; + if (mfbi->count == 0) { + struct fsl_diu_data *data = mfbi->parent; + bool disable = true; + int i; + + /* Disable interrupts only if all AOIs are closed */ + for (i = 0; i < NUM_AOIS; i++) { + struct mfb_info *mi = data->fsl_diu_info[i].par; + + if (mi->count) + disable = false; + } + if (disable) + out_be32(&data->diu_reg->int_mask, 0xffffffff); + fsl_diu_disable_panel(info); + } + + spin_unlock(&diu_lock); + return 0; +} + +static const struct fb_ops fsl_diu_ops = { + .owner = THIS_MODULE, + FB_DEFAULT_IOMEM_OPS, + .fb_check_var = fsl_diu_check_var, + .fb_set_par = fsl_diu_set_par, + .fb_setcolreg = fsl_diu_setcolreg, + .fb_pan_display = fsl_diu_pan_display, + .fb_ioctl = fsl_diu_ioctl, + .fb_open = fsl_diu_open, + .fb_release = fsl_diu_release, + .fb_cursor = fsl_diu_cursor, +}; + +static int install_fb(struct fb_info *info) +{ + int rc; + struct mfb_info *mfbi = info->par; + struct fsl_diu_data *data = mfbi->parent; + const char *aoi_mode, *init_aoi_mode = "320x240"; + struct fb_videomode *db = fsl_diu_mode_db; + unsigned int dbsize = ARRAY_SIZE(fsl_diu_mode_db); + int has_default_mode = 1; + + info->var.activate = FB_ACTIVATE_NOW; + info->fbops = &fsl_diu_ops; + info->flags = FBINFO_VIRTFB | FBINFO_PARTIAL_PAN_OK | + FBINFO_READS_FAST; + info->pseudo_palette = mfbi->pseudo_palette; + + rc = fb_alloc_cmap(&info->cmap, 16, 0); + if (rc) + return rc; + + if (mfbi->index == PLANE0) { + if (data->has_edid) { + /* Now build modedb from EDID */ + fb_edid_to_monspecs(data->edid_data, &info->monspecs); + fb_videomode_to_modelist(info->monspecs.modedb, + info->monspecs.modedb_len, + &info->modelist); + db = info->monspecs.modedb; + dbsize = info->monspecs.modedb_len; + } + aoi_mode = fb_mode; + } else { + aoi_mode = init_aoi_mode; + } + rc = fb_find_mode(&info->var, info, aoi_mode, db, dbsize, NULL, + default_bpp); + if (!rc) { + /* + * For plane 0 we continue and look into + * driver's internal modedb. + */ + if ((mfbi->index == PLANE0) && data->has_edid) + has_default_mode = 0; + else + return -EINVAL; + } + + if (!has_default_mode) { + rc = fb_find_mode(&info->var, info, aoi_mode, fsl_diu_mode_db, + ARRAY_SIZE(fsl_diu_mode_db), NULL, default_bpp); + if (rc) + has_default_mode = 1; + } + + /* Still not found, use preferred mode from database if any */ + if (!has_default_mode && info->monspecs.modedb) { + struct fb_monspecs *specs = &info->monspecs; + struct fb_videomode *modedb = &specs->modedb[0]; + + /* + * Get preferred timing. If not found, + * first mode in database will be used. + */ + if (specs->misc & FB_MISC_1ST_DETAIL) { + int i; + + for (i = 0; i < specs->modedb_len; i++) { + if (specs->modedb[i].flag & FB_MODE_IS_FIRST) { + modedb = &specs->modedb[i]; + break; + } + } + } + + info->var.bits_per_pixel = default_bpp; + fb_videomode_to_var(&info->var, modedb); + } + + if (fsl_diu_check_var(&info->var, info)) { + fb_err(info, "fsl_diu_check_var failed\n"); + unmap_video_memory(info); + fb_dealloc_cmap(&info->cmap); + return -EINVAL; + } + + if (register_framebuffer(info) < 0) { + fb_err(info, "register_framebuffer failed\n"); + unmap_video_memory(info); + fb_dealloc_cmap(&info->cmap); + return -EINVAL; + } + + mfbi->registered = 1; + fb_info(info, "%s registered successfully\n", mfbi->id); + + return 0; +} + +static void uninstall_fb(struct fb_info *info) +{ + struct mfb_info *mfbi = info->par; + + if (!mfbi->registered) + return; + + unregister_framebuffer(info); + unmap_video_memory(info); + fb_dealloc_cmap(&info->cmap); + + mfbi->registered = 0; +} + +static irqreturn_t fsl_diu_isr(int irq, void *dev_id) +{ + struct diu __iomem *hw = dev_id; + uint32_t status = in_be32(&hw->int_status); + + if (status) { + /* This is the workaround for underrun */ + if (status & INT_UNDRUN) { + out_be32(&hw->diu_mode, 0); + udelay(1); + out_be32(&hw->diu_mode, 1); + } +#if defined(CONFIG_NOT_COHERENT_CACHE) + else if (status & INT_VSYNC) { + unsigned int i; + + for (i = 0; i < coherence_data_size; + i += d_cache_line_size) + __asm__ __volatile__ ( + "dcbz 0, %[input]" + ::[input]"r"(&coherence_data[i])); + } +#endif + return IRQ_HANDLED; + } + return IRQ_NONE; +} + +#ifdef CONFIG_PM +/* + * Power management hooks. Note that we won't be called from IRQ context, + * unlike the blank functions above, so we may sleep. + */ +static int fsl_diu_suspend(struct platform_device *ofdev, pm_message_t state) +{ + struct fsl_diu_data *data; + + data = dev_get_drvdata(&ofdev->dev); + disable_lcdc(data->fsl_diu_info); + + return 0; +} + +static int fsl_diu_resume(struct platform_device *ofdev) +{ + struct fsl_diu_data *data; + unsigned int i; + + data = dev_get_drvdata(&ofdev->dev); + + fsl_diu_enable_interrupts(data); + update_lcdc(data->fsl_diu_info); + for (i = 0; i < NUM_AOIS; i++) { + if (data->mfb[i].count) + fsl_diu_enable_panel(&data->fsl_diu_info[i]); + } + + return 0; +} + +#else +#define fsl_diu_suspend NULL +#define fsl_diu_resume NULL +#endif /* CONFIG_PM */ + +static ssize_t store_monitor(struct device *device, + struct device_attribute *attr, const char *buf, size_t count) +{ + enum fsl_diu_monitor_port old_monitor_port; + struct fsl_diu_data *data = + container_of(attr, struct fsl_diu_data, dev_attr); + + old_monitor_port = data->monitor_port; + data->monitor_port = fsl_diu_name_to_port(buf); + + if (old_monitor_port != data->monitor_port) { + /* All AOIs need adjust pixel format + * fsl_diu_set_par only change the pixsel format here + * unlikely to fail. */ + unsigned int i; + + for (i=0; i < NUM_AOIS; i++) + fsl_diu_set_par(&data->fsl_diu_info[i]); + } + return count; +} + +static ssize_t show_monitor(struct device *device, + struct device_attribute *attr, char *buf) +{ + struct fsl_diu_data *data = + container_of(attr, struct fsl_diu_data, dev_attr); + + switch (data->monitor_port) { + case FSL_DIU_PORT_DVI: + return sprintf(buf, "DVI\n"); + case FSL_DIU_PORT_LVDS: + return sprintf(buf, "Single-link LVDS\n"); + case FSL_DIU_PORT_DLVDS: + return sprintf(buf, "Dual-link LVDS\n"); + } + + return 0; +} + +static int fsl_diu_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct mfb_info *mfbi; + struct fsl_diu_data *data; + dma_addr_t dma_addr; /* DMA addr of fsl_diu_data struct */ + const void *prop; + unsigned int i; + int ret; + + data = dmam_alloc_coherent(&pdev->dev, sizeof(struct fsl_diu_data), + &dma_addr, GFP_DMA | __GFP_ZERO); + if (!data) + return -ENOMEM; + data->dma_addr = dma_addr; + + /* + * dma_alloc_coherent() uses a page allocator, so the address is + * always page-aligned. We need the memory to be 32-byte aligned, + * so that's good. However, if one day the allocator changes, we + * need to catch that. It's not worth the effort to handle unaligned + * alloctions now because it's highly unlikely to ever be a problem. + */ + if ((unsigned long)data & 31) { + dev_err(&pdev->dev, "misaligned allocation"); + ret = -ENOMEM; + goto error; + } + + spin_lock_init(&data->reg_lock); + + for (i = 0; i < NUM_AOIS; i++) { + struct fb_info *info = &data->fsl_diu_info[i]; + + info->device = &pdev->dev; + info->par = &data->mfb[i]; + + /* + * We store the physical address of the AD in the reserved + * 'paddr' field of the AD itself. + */ + data->ad[i].paddr = DMA_ADDR(data, ad[i]); + + info->fix.smem_start = 0; + + /* Initialize the AOI data structure */ + mfbi = info->par; + memcpy(mfbi, &mfb_template[i], sizeof(struct mfb_info)); + mfbi->parent = data; + mfbi->ad = &data->ad[i]; + } + + /* Get the EDID data from the device tree, if present */ + prop = of_get_property(np, "edid", &ret); + if (prop && ret == EDID_LENGTH) { + memcpy(data->edid_data, prop, EDID_LENGTH); + data->has_edid = true; + } + + data->diu_reg = of_iomap(np, 0); + if (!data->diu_reg) { + dev_err(&pdev->dev, "cannot map DIU registers\n"); + ret = -EFAULT; + goto error; + } + + /* Get the IRQ of the DIU */ + data->irq = irq_of_parse_and_map(np, 0); + + if (!data->irq) { + dev_err(&pdev->dev, "could not get DIU IRQ\n"); + ret = -EINVAL; + goto error; + } + data->monitor_port = monitor_port; + + /* Initialize the dummy Area Descriptor */ + data->dummy_ad.addr = cpu_to_le32(DMA_ADDR(data, dummy_aoi)); + data->dummy_ad.pix_fmt = 0x88882317; + data->dummy_ad.src_size_g_alpha = cpu_to_le32((4 << 12) | 4); + data->dummy_ad.aoi_size = cpu_to_le32((4 << 16) | 2); + data->dummy_ad.offset_xyi = 0; + data->dummy_ad.offset_xyd = 0; + data->dummy_ad.next_ad = 0; + data->dummy_ad.paddr = DMA_ADDR(data, dummy_ad); + + /* + * Let DIU continue to display splash screen if it was pre-initialized + * by the bootloader; otherwise, clear the display. + */ + if (in_be32(&data->diu_reg->diu_mode) == MFB_MODE0) + out_be32(&data->diu_reg->desc[0], 0); + + out_be32(&data->diu_reg->desc[1], data->dummy_ad.paddr); + out_be32(&data->diu_reg->desc[2], data->dummy_ad.paddr); + + /* + * Older versions of U-Boot leave interrupts enabled, so disable + * all of them and clear the status register. + */ + out_be32(&data->diu_reg->int_mask, 0xffffffff); + in_be32(&data->diu_reg->int_status); + + ret = request_irq(data->irq, fsl_diu_isr, 0, "fsl-diu-fb", + data->diu_reg); + if (ret) { + dev_err(&pdev->dev, "could not claim irq\n"); + goto error; + } + + for (i = 0; i < NUM_AOIS; i++) { + ret = install_fb(&data->fsl_diu_info[i]); + if (ret) { + dev_err(&pdev->dev, "could not register fb %d\n", i); + free_irq(data->irq, data->diu_reg); + goto error; + } + } + + sysfs_attr_init(&data->dev_attr.attr); + data->dev_attr.attr.name = "monitor"; + data->dev_attr.attr.mode = S_IRUGO|S_IWUSR; + data->dev_attr.show = show_monitor; + data->dev_attr.store = store_monitor; + ret = device_create_file(&pdev->dev, &data->dev_attr); + if (ret) { + dev_err(&pdev->dev, "could not create sysfs file %s\n", + data->dev_attr.attr.name); + } + + dev_set_drvdata(&pdev->dev, data); + return 0; + +error: + for (i = 0; i < NUM_AOIS; i++) + uninstall_fb(&data->fsl_diu_info[i]); + + iounmap(data->diu_reg); + + return ret; +} + +static void fsl_diu_remove(struct platform_device *pdev) +{ + struct fsl_diu_data *data; + int i; + + data = dev_get_drvdata(&pdev->dev); + disable_lcdc(&data->fsl_diu_info[0]); + + free_irq(data->irq, data->diu_reg); + + for (i = 0; i < NUM_AOIS; i++) + uninstall_fb(&data->fsl_diu_info[i]); + + iounmap(data->diu_reg); +} + +#ifndef MODULE +static int __init fsl_diu_setup(char *options) +{ + char *opt; + unsigned long val; + + if (!options || !*options) + return 0; + + while ((opt = strsep(&options, ",")) != NULL) { + if (!*opt) + continue; + if (!strncmp(opt, "monitor=", 8)) { + monitor_port = fsl_diu_name_to_port(opt + 8); + } else if (!strncmp(opt, "bpp=", 4)) { + if (!kstrtoul(opt + 4, 10, &val)) + default_bpp = val; + } else + fb_mode = opt; + } + + return 0; +} +#endif + +static const struct of_device_id fsl_diu_match[] = { +#ifdef CONFIG_PPC_MPC512x + { + .compatible = "fsl,mpc5121-diu", + }, +#endif + { + .compatible = "fsl,diu", + }, + {} +}; +MODULE_DEVICE_TABLE(of, fsl_diu_match); + +static struct platform_driver fsl_diu_driver = { + .driver = { + .name = "fsl-diu-fb", + .of_match_table = fsl_diu_match, + }, + .probe = fsl_diu_probe, + .remove_new = fsl_diu_remove, + .suspend = fsl_diu_suspend, + .resume = fsl_diu_resume, +}; + +static int __init fsl_diu_init(void) +{ +#ifdef CONFIG_NOT_COHERENT_CACHE + struct device_node *np; + const u32 *prop; +#endif + int ret; +#ifndef MODULE + char *option; + + /* + * For kernel boot options (in 'video=xxxfb:<options>' format) + */ + if (fb_get_options("fslfb", &option)) + return -ENODEV; + fsl_diu_setup(option); +#else + monitor_port = fsl_diu_name_to_port(monitor_string); +#endif + + /* + * Must to verify set_pixel_clock. If not implement on platform, + * then that means that there is no platform support for the DIU. + */ + if (!diu_ops.set_pixel_clock) + return -ENODEV; + + pr_info("Freescale Display Interface Unit (DIU) framebuffer driver\n"); + +#ifdef CONFIG_NOT_COHERENT_CACHE + np = of_get_cpu_node(0, NULL); + if (!np) { + pr_err("fsl-diu-fb: can't find 'cpu' device node\n"); + return -ENODEV; + } + + prop = of_get_property(np, "d-cache-size", NULL); + if (prop == NULL) { + pr_err("fsl-diu-fb: missing 'd-cache-size' property' " + "in 'cpu' node\n"); + of_node_put(np); + return -ENODEV; + } + + /* + * Freescale PLRU requires 13/8 times the cache size to do a proper + * displacement flush + */ + coherence_data_size = be32_to_cpup(prop) * 13; + coherence_data_size /= 8; + + pr_debug("fsl-diu-fb: coherence data size is %zu bytes\n", + coherence_data_size); + + prop = of_get_property(np, "d-cache-line-size", NULL); + if (prop == NULL) { + pr_err("fsl-diu-fb: missing 'd-cache-line-size' property' " + "in 'cpu' node\n"); + of_node_put(np); + return -ENODEV; + } + d_cache_line_size = be32_to_cpup(prop); + + pr_debug("fsl-diu-fb: cache lines size is %u bytes\n", + d_cache_line_size); + + of_node_put(np); + coherence_data = vmalloc(coherence_data_size); + if (!coherence_data) + return -ENOMEM; +#endif + + ret = platform_driver_register(&fsl_diu_driver); + if (ret) { + pr_err("fsl-diu-fb: failed to register platform driver\n"); +#if defined(CONFIG_NOT_COHERENT_CACHE) + vfree(coherence_data); +#endif + } + return ret; +} + +static void __exit fsl_diu_exit(void) +{ + platform_driver_unregister(&fsl_diu_driver); +#if defined(CONFIG_NOT_COHERENT_CACHE) + vfree(coherence_data); +#endif +} + +module_init(fsl_diu_init); +module_exit(fsl_diu_exit); + +MODULE_AUTHOR("York Sun <yorksun@freescale.com>"); +MODULE_DESCRIPTION("Freescale DIU framebuffer driver"); +MODULE_LICENSE("GPL"); + +module_param_named(mode, fb_mode, charp, 0); +MODULE_PARM_DESC(mode, + "Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" "); +module_param_named(bpp, default_bpp, ulong, 0); +MODULE_PARM_DESC(bpp, "Specify bit-per-pixel if not specified in 'mode'"); +module_param_named(monitor, monitor_string, charp, 0); +MODULE_PARM_DESC(monitor, "Specify the monitor port " + "(\"dvi\", \"lvds\", or \"dlvds\") if supported by the platform"); + |