summaryrefslogtreecommitdiffstats
path: root/drivers/video/fbdev/savage
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/video/fbdev/savage')
-rw-r--r--drivers/video/fbdev/savage/Makefile10
-rw-r--r--drivers/video/fbdev/savage/savagefb-i2c.c241
-rw-r--r--drivers/video/fbdev/savage/savagefb.h406
-rw-r--r--drivers/video/fbdev/savage/savagefb_accel.c137
-rw-r--r--drivers/video/fbdev/savage/savagefb_driver.c2573
5 files changed, 3367 insertions, 0 deletions
diff --git a/drivers/video/fbdev/savage/Makefile b/drivers/video/fbdev/savage/Makefile
new file mode 100644
index 0000000000..3f6fcced16
--- /dev/null
+++ b/drivers/video/fbdev/savage/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for the S3 Savage framebuffer driver
+#
+
+obj-$(CONFIG_FB_SAVAGE) += savagefb.o
+
+savagefb-y += savagefb_driver.o
+savagefb-$(CONFIG_FB_SAVAGE_I2C) += savagefb-i2c.o
+savagefb-$(CONFIG_FB_SAVAGE_ACCEL) += savagefb_accel.o
diff --git a/drivers/video/fbdev/savage/savagefb-i2c.c b/drivers/video/fbdev/savage/savagefb-i2c.c
new file mode 100644
index 0000000000..80fa87e2ae
--- /dev/null
+++ b/drivers/video/fbdev/savage/savagefb-i2c.c
@@ -0,0 +1,241 @@
+/*
+ * linux/drivers/video/savage/savagefb-i2c.c - S3 Savage DDC2
+ *
+ * Copyright 2004 Antonino A. Daplas <adaplas @pol.net>
+ *
+ * Based partly on rivafb-i2c.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/gfp.h>
+#include <linux/pci.h>
+#include <linux/fb.h>
+
+#include <asm/io.h>
+#include "savagefb.h"
+
+#define SAVAGE_DDC 0x50
+
+#define VGA_CR_IX 0x3d4
+#define VGA_CR_DATA 0x3d5
+
+#define CR_SERIAL1 0xa0 /* I2C serial communications interface */
+#define MM_SERIAL1 0xff20
+#define CR_SERIAL2 0xb1 /* DDC2 monitor communications interface */
+
+/* based on vt8365 documentation */
+#define PROSAVAGE_I2C_ENAB 0x10
+#define PROSAVAGE_I2C_SCL_OUT 0x01
+#define PROSAVAGE_I2C_SDA_OUT 0x02
+#define PROSAVAGE_I2C_SCL_IN 0x04
+#define PROSAVAGE_I2C_SDA_IN 0x08
+
+#define SAVAGE4_I2C_ENAB 0x00000020
+#define SAVAGE4_I2C_SCL_OUT 0x00000001
+#define SAVAGE4_I2C_SDA_OUT 0x00000002
+#define SAVAGE4_I2C_SCL_IN 0x00000008
+#define SAVAGE4_I2C_SDA_IN 0x00000010
+
+static void savage4_gpio_setscl(void *data, int val)
+{
+ struct savagefb_i2c_chan *chan = data;
+ unsigned int r;
+
+ r = readl(chan->ioaddr + chan->reg);
+ if(val)
+ r |= SAVAGE4_I2C_SCL_OUT;
+ else
+ r &= ~SAVAGE4_I2C_SCL_OUT;
+ writel(r, chan->ioaddr + chan->reg);
+ readl(chan->ioaddr + chan->reg); /* flush posted write */
+}
+
+static void savage4_gpio_setsda(void *data, int val)
+{
+ struct savagefb_i2c_chan *chan = data;
+
+ unsigned int r;
+ r = readl(chan->ioaddr + chan->reg);
+ if(val)
+ r |= SAVAGE4_I2C_SDA_OUT;
+ else
+ r &= ~SAVAGE4_I2C_SDA_OUT;
+ writel(r, chan->ioaddr + chan->reg);
+ readl(chan->ioaddr + chan->reg); /* flush posted write */
+}
+
+static int savage4_gpio_getscl(void *data)
+{
+ struct savagefb_i2c_chan *chan = data;
+
+ return (0 != (readl(chan->ioaddr + chan->reg) & SAVAGE4_I2C_SCL_IN));
+}
+
+static int savage4_gpio_getsda(void *data)
+{
+ struct savagefb_i2c_chan *chan = data;
+
+ return (0 != (readl(chan->ioaddr + chan->reg) & SAVAGE4_I2C_SDA_IN));
+}
+
+static void prosavage_gpio_setscl(void* data, int val)
+{
+ struct savagefb_i2c_chan *chan = data;
+ u32 r;
+
+ r = VGArCR(chan->reg, chan->par);
+ r |= PROSAVAGE_I2C_ENAB;
+ if (val) {
+ r |= PROSAVAGE_I2C_SCL_OUT;
+ } else {
+ r &= ~PROSAVAGE_I2C_SCL_OUT;
+ }
+
+ VGAwCR(chan->reg, r, chan->par);
+}
+
+static void prosavage_gpio_setsda(void* data, int val)
+{
+ struct savagefb_i2c_chan *chan = data;
+ unsigned int r;
+
+ r = VGArCR(chan->reg, chan->par);
+ r |= PROSAVAGE_I2C_ENAB;
+ if (val) {
+ r |= PROSAVAGE_I2C_SDA_OUT;
+ } else {
+ r &= ~PROSAVAGE_I2C_SDA_OUT;
+ }
+
+ VGAwCR(chan->reg, r, chan->par);
+}
+
+static int prosavage_gpio_getscl(void* data)
+{
+ struct savagefb_i2c_chan *chan = data;
+
+ return (VGArCR(chan->reg, chan->par) & PROSAVAGE_I2C_SCL_IN) ? 1 : 0;
+}
+
+static int prosavage_gpio_getsda(void* data)
+{
+ struct savagefb_i2c_chan *chan = data;
+
+ return (VGArCR(chan->reg, chan->par) & PROSAVAGE_I2C_SDA_IN) ? 1 : 0;
+}
+
+static int savage_setup_i2c_bus(struct savagefb_i2c_chan *chan,
+ const char *name)
+{
+ int rc = 0;
+
+ if (chan->par) {
+ strcpy(chan->adapter.name, name);
+ chan->adapter.owner = THIS_MODULE;
+ chan->adapter.algo_data = &chan->algo;
+ chan->adapter.dev.parent = &chan->par->pcidev->dev;
+ chan->algo.udelay = 10;
+ chan->algo.timeout = 20;
+ chan->algo.data = chan;
+
+ i2c_set_adapdata(&chan->adapter, chan);
+
+ /* Raise SCL and SDA */
+ chan->algo.setsda(chan, 1);
+ chan->algo.setscl(chan, 1);
+ udelay(20);
+
+ rc = i2c_bit_add_bus(&chan->adapter);
+
+ if (rc == 0)
+ dev_dbg(&chan->par->pcidev->dev,
+ "I2C bus %s registered.\n", name);
+ else
+ dev_warn(&chan->par->pcidev->dev,
+ "Failed to register I2C bus %s.\n", name);
+ }
+
+ return rc;
+}
+
+void savagefb_create_i2c_busses(struct fb_info *info)
+{
+ struct savagefb_par *par = info->par;
+ par->chan.par = par;
+
+ switch (par->chip) {
+ case S3_PROSAVAGE:
+ case S3_PROSAVAGEDDR:
+ case S3_TWISTER:
+ par->chan.reg = CR_SERIAL2;
+ par->chan.ioaddr = par->mmio.vbase;
+ par->chan.algo.setsda = prosavage_gpio_setsda;
+ par->chan.algo.setscl = prosavage_gpio_setscl;
+ par->chan.algo.getsda = prosavage_gpio_getsda;
+ par->chan.algo.getscl = prosavage_gpio_getscl;
+ break;
+ case S3_SAVAGE4:
+ par->chan.reg = CR_SERIAL1;
+ if (par->pcidev->revision > 1 && !(VGArCR(0xa6, par) & 0x40))
+ par->chan.reg = CR_SERIAL2;
+ par->chan.ioaddr = par->mmio.vbase;
+ par->chan.algo.setsda = prosavage_gpio_setsda;
+ par->chan.algo.setscl = prosavage_gpio_setscl;
+ par->chan.algo.getsda = prosavage_gpio_getsda;
+ par->chan.algo.getscl = prosavage_gpio_getscl;
+ break;
+ case S3_SAVAGE2000:
+ par->chan.reg = MM_SERIAL1;
+ par->chan.ioaddr = par->mmio.vbase;
+ par->chan.algo.setsda = savage4_gpio_setsda;
+ par->chan.algo.setscl = savage4_gpio_setscl;
+ par->chan.algo.getsda = savage4_gpio_getsda;
+ par->chan.algo.getscl = savage4_gpio_getscl;
+ break;
+ default:
+ par->chan.par = NULL;
+ }
+
+ savage_setup_i2c_bus(&par->chan, "SAVAGE DDC2");
+}
+
+void savagefb_delete_i2c_busses(struct fb_info *info)
+{
+ struct savagefb_par *par = info->par;
+
+ if (par->chan.par)
+ i2c_del_adapter(&par->chan.adapter);
+
+ par->chan.par = NULL;
+}
+
+int savagefb_probe_i2c_connector(struct fb_info *info, u8 **out_edid)
+{
+ struct savagefb_par *par = info->par;
+ u8 *edid;
+
+ if (par->chan.par)
+ edid = fb_ddc_read(&par->chan.adapter);
+ else
+ edid = NULL;
+
+ if (!edid) {
+ /* try to get from firmware */
+ const u8 *e = fb_firmware_edid(info->device);
+
+ if (e)
+ edid = kmemdup(e, EDID_LENGTH, GFP_KERNEL);
+ }
+
+ *out_edid = edid;
+
+ return (edid) ? 0 : 1;
+}
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/savage/savagefb.h b/drivers/video/fbdev/savage/savagefb.h
new file mode 100644
index 0000000000..b6b8cc2082
--- /dev/null
+++ b/drivers/video/fbdev/savage/savagefb.h
@@ -0,0 +1,406 @@
+/*
+ * linux/drivers/video/savagefb.h -- S3 Savage Framebuffer Driver
+ *
+ * Copyright (c) 2001 Denis Oliver Kropp <dok@convergence.de>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+
+#ifndef __SAVAGEFB_H__
+#define __SAVAGEFB_H__
+
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/mutex.h>
+#include <video/vga.h>
+#include "../edid.h"
+
+#ifdef SAVAGEFB_DEBUG
+# define DBG(x) printk (KERN_DEBUG "savagefb: %s\n", (x));
+#else
+# define DBG(x) no_printk(x)
+# define SavagePrintRegs(...)
+#endif
+
+
+#define PCI_CHIP_SAVAGE4 0x8a22
+#define PCI_CHIP_SAVAGE3D 0x8a20
+#define PCI_CHIP_SAVAGE3D_MV 0x8a21
+#define PCI_CHIP_SAVAGE2000 0x9102
+#define PCI_CHIP_SAVAGE_MX_MV 0x8c10
+#define PCI_CHIP_SAVAGE_MX 0x8c11
+#define PCI_CHIP_SAVAGE_IX_MV 0x8c12
+#define PCI_CHIP_SAVAGE_IX 0x8c13
+#define PCI_CHIP_PROSAVAGE_PM 0x8a25
+#define PCI_CHIP_PROSAVAGE_KM 0x8a26
+#define PCI_CHIP_S3TWISTER_P 0x8d01
+#define PCI_CHIP_S3TWISTER_K 0x8d02
+#define PCI_CHIP_PROSAVAGE_DDR 0x8d03
+#define PCI_CHIP_PROSAVAGE_DDRK 0x8d04
+#define PCI_CHIP_SUPSAV_MX128 0x8c22
+#define PCI_CHIP_SUPSAV_MX64 0x8c24
+#define PCI_CHIP_SUPSAV_MX64C 0x8c26
+#define PCI_CHIP_SUPSAV_IX128SDR 0x8c2a
+#define PCI_CHIP_SUPSAV_IX128DDR 0x8c2b
+#define PCI_CHIP_SUPSAV_IX64SDR 0x8c2c
+#define PCI_CHIP_SUPSAV_IX64DDR 0x8c2d
+#define PCI_CHIP_SUPSAV_IXCSDR 0x8c2e
+#define PCI_CHIP_SUPSAV_IXCDDR 0x8c2f
+
+
+#define S3_SAVAGE_SERIES(chip) ((chip>=S3_SAVAGE3D) && (chip<=S3_SAVAGE2000))
+
+#define S3_SAVAGE3D_SERIES(chip) ((chip>=S3_SAVAGE3D) && (chip<=S3_SAVAGE_MX))
+
+#define S3_SAVAGE4_SERIES(chip) ((chip>=S3_SAVAGE4) && (chip<=S3_PROSAVAGEDDR))
+
+#define S3_SAVAGE_MOBILE_SERIES(chip) ((chip==S3_SAVAGE_MX) || (chip==S3_SUPERSAVAGE))
+
+#define S3_MOBILE_TWISTER_SERIES(chip) ((chip==S3_TWISTER) || (chip==S3_PROSAVAGEDDR))
+
+/* Chip tags. These are used to group the adapters into
+ * related families.
+ */
+
+typedef enum {
+ S3_UNKNOWN = 0,
+ S3_SAVAGE3D,
+ S3_SAVAGE_MX,
+ S3_SAVAGE4,
+ S3_PROSAVAGE,
+ S3_TWISTER,
+ S3_PROSAVAGEDDR,
+ S3_SUPERSAVAGE,
+ S3_SAVAGE2000,
+ S3_LAST
+} savage_chipset;
+
+#define BIOS_BSIZE 1024
+#define BIOS_BASE 0xc0000
+
+#define SAVAGE_NEWMMIO_REGBASE_S3 0x1000000 /* 16MB */
+#define SAVAGE_NEWMMIO_REGBASE_S4 0x0000000
+#define SAVAGE_NEWMMIO_REGSIZE 0x0080000 /* 512kb */
+#define SAVAGE_NEWMMIO_VGABASE 0x8000
+
+#define BASE_FREQ 14318
+#define HALF_BASE_FREQ 7159
+
+#define FIFO_CONTROL_REG 0x8200
+#define MIU_CONTROL_REG 0x8204
+#define STREAMS_TIMEOUT_REG 0x8208
+#define MISC_TIMEOUT_REG 0x820c
+
+#define MONO_PAT_0 0xa4e8
+#define MONO_PAT_1 0xa4ec
+
+#define MAXFIFO 0x7f00
+
+#define BCI_CMD_NOP 0x40000000
+#define BCI_CMD_SETREG 0x96000000
+#define BCI_CMD_RECT 0x48000000
+#define BCI_CMD_RECT_XP 0x01000000
+#define BCI_CMD_RECT_YP 0x02000000
+#define BCI_CMD_SEND_COLOR 0x00008000
+#define BCI_CMD_DEST_GBD 0x00000000
+#define BCI_CMD_SRC_GBD 0x00000020
+#define BCI_CMD_SRC_SOLID 0x00000000
+#define BCI_CMD_SRC_MONO 0x00000060
+#define BCI_CMD_CLIP_NEW 0x00006000
+#define BCI_CMD_CLIP_LR 0x00004000
+
+#define BCI_CLIP_LR(l, r) ((((r) << 16) | (l)) & 0x0FFF0FFF)
+#define BCI_CLIP_TL(t, l) ((((t) << 16) | (l)) & 0x0FFF0FFF)
+#define BCI_CLIP_BR(b, r) ((((b) << 16) | (r)) & 0x0FFF0FFF)
+#define BCI_W_H(w, h) (((h) << 16) | ((w) & 0xFFF))
+#define BCI_X_Y(x, y) (((y) << 16) | ((x) & 0xFFF))
+
+#define BCI_GBD1 0xE0
+#define BCI_GBD2 0xE1
+
+#define BCI_BUFFER_OFFSET 0x10000
+#define BCI_SIZE 0x4000
+
+#define BCI_SEND(dw) writel(dw, par->bci_base + par->bci_ptr++)
+
+#define BCI_CMD_GET_ROP(cmd) (((cmd) >> 16) & 0xFF)
+#define BCI_CMD_SET_ROP(cmd, rop) ((cmd) |= ((rop & 0xFF) << 16))
+#define BCI_CMD_SEND_COLOR 0x00008000
+
+#define DISP_CRT 1
+#define DISP_LCD 2
+#define DISP_DFP 3
+
+struct xtimings {
+ unsigned int Clock;
+ unsigned int HDisplay;
+ unsigned int HSyncStart;
+ unsigned int HSyncEnd;
+ unsigned int HTotal;
+ unsigned int HAdjusted;
+ unsigned int VDisplay;
+ unsigned int VSyncStart;
+ unsigned int VSyncEnd;
+ unsigned int VTotal;
+ unsigned int sync;
+ int dblscan;
+ int interlaced;
+};
+
+struct savage_reg {
+ unsigned char MiscOutReg; /* Misc */
+ unsigned char CRTC[25]; /* Crtc Controller */
+ unsigned char Sequencer[5]; /* Video Sequencer */
+ unsigned char Graphics[9]; /* Video Graphics */
+ unsigned char Attribute[21]; /* Video Attribute */
+
+ unsigned int mode, refresh;
+ unsigned char SR08, SR0E, SR0F;
+ unsigned char SR10, SR11, SR12, SR13, SR15, SR18, SR29, SR30;
+ unsigned char SR54[8];
+ unsigned char Clock;
+ unsigned char CR31, CR32, CR33, CR34, CR36, CR3A, CR3B, CR3C;
+ unsigned char CR40, CR41, CR42, CR43, CR45;
+ unsigned char CR50, CR51, CR53, CR55, CR58, CR5B, CR5D, CR5E;
+ unsigned char CR60, CR63, CR65, CR66, CR67, CR68, CR69, CR6D, CR6F;
+ unsigned char CR86, CR88;
+ unsigned char CR90, CR91, CRB0;
+ unsigned int STREAMS[22]; /* yuck, streams regs */
+ unsigned int MMPR0, MMPR1, MMPR2, MMPR3;
+};
+/* --------------------------------------------------------------------- */
+
+#define NR_PALETTE 256
+
+
+struct savagefb_par;
+
+struct savagefb_i2c_chan {
+ struct savagefb_par *par;
+ struct i2c_adapter adapter;
+ struct i2c_algo_bit_data algo;
+ volatile u8 __iomem *ioaddr;
+ u32 reg;
+};
+
+struct savagefb_par {
+ struct pci_dev *pcidev;
+ savage_chipset chip;
+ struct savagefb_i2c_chan chan;
+ struct savage_reg state;
+ struct savage_reg save;
+ struct savage_reg initial;
+ struct vgastate vgastate;
+ struct mutex open_lock;
+ u32 pseudo_palette[16];
+ u32 open_count;
+ int paletteEnabled;
+ int pm_state;
+ int display_type;
+ int dvi;
+ int crtonly;
+ int dacSpeedBpp;
+ int maxClock;
+ int minClock;
+ int numClocks;
+ int clock[4];
+ int MCLK, REFCLK, LCDclk;
+ struct {
+ void __iomem *vbase;
+ u32 pbase;
+ u32 len;
+ int wc_cookie;
+ } video;
+
+ struct {
+ void __iomem *vbase;
+ u32 pbase;
+ u32 len;
+ } mmio;
+
+ volatile u32 __iomem *bci_base;
+ unsigned int bci_ptr;
+ u32 cob_offset;
+ u32 cob_size;
+ int cob_index;
+
+ void (*SavageWaitIdle) (struct savagefb_par *par);
+ void (*SavageWaitFifo) (struct savagefb_par *par, int space);
+
+ int HorizScaleFactor;
+
+ /* Panels size */
+ int SavagePanelWidth;
+ int SavagePanelHeight;
+
+ struct {
+ u16 red, green, blue, transp;
+ } palette[NR_PALETTE];
+
+ int depth;
+ int vwidth;
+};
+
+#define BCI_BD_BW_DISABLE 0x10000000
+#define BCI_BD_SET_BPP(bd, bpp) ((bd) |= (((bpp) & 0xFF) << 16))
+#define BCI_BD_SET_STRIDE(bd, st) ((bd) |= ((st) & 0xFFFF))
+
+
+/* IO functions */
+static inline u8 savage_in8(u32 addr, struct savagefb_par *par)
+{
+ return readb(par->mmio.vbase + addr);
+}
+
+static inline u16 savage_in16(u32 addr, struct savagefb_par *par)
+{
+ return readw(par->mmio.vbase + addr);
+}
+
+static inline u32 savage_in32(u32 addr, struct savagefb_par *par)
+{
+ return readl(par->mmio.vbase + addr);
+}
+
+static inline void savage_out8(u32 addr, u8 val, struct savagefb_par *par)
+{
+ writeb(val, par->mmio.vbase + addr);
+}
+
+static inline void savage_out16(u32 addr, u16 val, struct savagefb_par *par)
+{
+ writew(val, par->mmio.vbase + addr);
+}
+
+static inline void savage_out32(u32 addr, u32 val, struct savagefb_par *par)
+{
+ writel(val, par->mmio.vbase + addr);
+}
+
+static inline u8 vga_in8(int addr, struct savagefb_par *par)
+{
+ return savage_in8(0x8000 + addr, par);
+}
+
+static inline u16 vga_in16(int addr, struct savagefb_par *par)
+{
+ return savage_in16(0x8000 + addr, par);
+}
+
+static inline u8 vga_in32(int addr, struct savagefb_par *par)
+{
+ return savage_in32(0x8000 + addr, par);
+}
+
+static inline void vga_out8(int addr, u8 val, struct savagefb_par *par)
+{
+ savage_out8(0x8000 + addr, val, par);
+}
+
+static inline void vga_out16(int addr, u16 val, struct savagefb_par *par)
+{
+ savage_out16(0x8000 + addr, val, par);
+}
+
+static inline void vga_out32(int addr, u32 val, struct savagefb_par *par)
+{
+ savage_out32(0x8000 + addr, val, par);
+}
+
+static inline u8 VGArCR (u8 index, struct savagefb_par *par)
+{
+ vga_out8(0x3d4, index, par);
+ return vga_in8(0x3d5, par);
+}
+
+static inline u8 VGArGR (u8 index, struct savagefb_par *par)
+{
+ vga_out8(0x3ce, index, par);
+ return vga_in8(0x3cf, par);
+}
+
+static inline u8 VGArSEQ (u8 index, struct savagefb_par *par)
+{
+ vga_out8(0x3c4, index, par);
+ return vga_in8(0x3c5, par);
+}
+
+static inline void VGAwCR(u8 index, u8 val, struct savagefb_par *par)
+{
+ vga_out8(0x3d4, index, par);
+ vga_out8(0x3d5, val, par);
+}
+
+static inline void VGAwGR(u8 index, u8 val, struct savagefb_par *par)
+{
+ vga_out8(0x3ce, index, par);
+ vga_out8(0x3cf, val, par);
+}
+
+static inline void VGAwSEQ(u8 index, u8 val, struct savagefb_par *par)
+{
+ vga_out8(0x3c4, index, par);
+ vga_out8 (0x3c5, val, par);
+}
+
+static inline void VGAenablePalette(struct savagefb_par *par)
+{
+ vga_in8(0x3da, par);
+ vga_out8(0x3c0, 0x00, par);
+ par->paletteEnabled = 1;
+}
+
+static inline void VGAdisablePalette(struct savagefb_par *par)
+{
+ vga_in8(0x3da, par);
+ vga_out8(0x3c0, 0x20, par);
+ par->paletteEnabled = 0;
+}
+
+static inline void VGAwATTR(u8 index, u8 value, struct savagefb_par *par)
+{
+ if (par->paletteEnabled)
+ index &= ~0x20;
+ else
+ index |= 0x20;
+
+ vga_in8(0x3da, par);
+ vga_out8(0x3c0, index, par);
+ vga_out8 (0x3c0, value, par);
+}
+
+static inline void VGAwMISC(u8 value, struct savagefb_par *par)
+{
+ vga_out8(0x3c2, value, par);
+}
+
+#ifndef CONFIG_FB_SAVAGE_ACCEL
+#define savagefb_set_clip(x)
+#endif
+
+static inline void VerticalRetraceWait(struct savagefb_par *par)
+{
+ vga_out8(0x3d4, 0x17, par);
+ if (vga_in8(0x3d5, par) & 0x80) {
+ while ((vga_in8(0x3da, par) & 0x08) == 0x08);
+ while ((vga_in8(0x3da, par) & 0x08) == 0x00);
+ }
+}
+
+extern int savagefb_probe_i2c_connector(struct fb_info *info,
+ u8 **out_edid);
+extern void savagefb_create_i2c_busses(struct fb_info *info);
+extern void savagefb_delete_i2c_busses(struct fb_info *info);
+extern int savagefb_sync(struct fb_info *info);
+extern void savagefb_copyarea(struct fb_info *info,
+ const struct fb_copyarea *region);
+extern void savagefb_fillrect(struct fb_info *info,
+ const struct fb_fillrect *rect);
+extern void savagefb_imageblit(struct fb_info *info,
+ const struct fb_image *image);
+
+
+#endif /* __SAVAGEFB_H__ */
diff --git a/drivers/video/fbdev/savage/savagefb_accel.c b/drivers/video/fbdev/savage/savagefb_accel.c
new file mode 100644
index 0000000000..bfefa6234c
--- /dev/null
+++ b/drivers/video/fbdev/savage/savagefb_accel.c
@@ -0,0 +1,137 @@
+/*-*- linux-c -*-
+ * linux/drivers/video/savage/savage_accel.c -- Hardware Acceleration
+ *
+ * Copyright (C) 2004 Antonino Daplas<adaplas@pol.net>
+ * All Rights Reserved
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/fb.h>
+#include <linux/module.h>
+
+#include "savagefb.h"
+
+static u32 savagefb_rop[] = {
+ 0xCC, /* ROP_COPY */
+ 0x5A /* ROP_XOR */
+};
+
+int savagefb_sync(struct fb_info *info)
+{
+ struct savagefb_par *par = info->par;
+
+ par->SavageWaitIdle(par);
+ return 0;
+}
+
+void savagefb_copyarea(struct fb_info *info, const struct fb_copyarea *region)
+{
+ struct savagefb_par *par = info->par;
+ int sx = region->sx, dx = region->dx;
+ int sy = region->sy, dy = region->dy;
+ int cmd;
+
+ if (!region->width || !region->height)
+ return;
+ par->bci_ptr = 0;
+ cmd = BCI_CMD_RECT | BCI_CMD_DEST_GBD | BCI_CMD_SRC_GBD;
+ BCI_CMD_SET_ROP(cmd, savagefb_rop[0]);
+
+ if (dx <= sx) {
+ cmd |= BCI_CMD_RECT_XP;
+ } else {
+ sx += region->width - 1;
+ dx += region->width - 1;
+ }
+
+ if (dy <= sy) {
+ cmd |= BCI_CMD_RECT_YP;
+ } else {
+ sy += region->height - 1;
+ dy += region->height - 1;
+ }
+
+ par->SavageWaitFifo(par,4);
+ BCI_SEND(cmd);
+ BCI_SEND(BCI_X_Y(sx, sy));
+ BCI_SEND(BCI_X_Y(dx, dy));
+ BCI_SEND(BCI_W_H(region->width, region->height));
+}
+
+void savagefb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
+{
+ struct savagefb_par *par = info->par;
+ int cmd, color;
+
+ if (!rect->width || !rect->height)
+ return;
+
+ if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR)
+ color = rect->color;
+ else
+ color = ((u32 *)info->pseudo_palette)[rect->color];
+
+ cmd = BCI_CMD_RECT | BCI_CMD_RECT_XP | BCI_CMD_RECT_YP |
+ BCI_CMD_DEST_GBD | BCI_CMD_SRC_SOLID |
+ BCI_CMD_SEND_COLOR;
+
+ par->bci_ptr = 0;
+ BCI_CMD_SET_ROP(cmd, savagefb_rop[rect->rop]);
+
+ par->SavageWaitFifo(par,4);
+ BCI_SEND(cmd);
+ BCI_SEND(color);
+ BCI_SEND( BCI_X_Y(rect->dx, rect->dy) );
+ BCI_SEND( BCI_W_H(rect->width, rect->height) );
+}
+
+void savagefb_imageblit(struct fb_info *info, const struct fb_image *image)
+{
+ struct savagefb_par *par = info->par;
+ int fg, bg, size, i, width;
+ int cmd;
+ u32 *src = (u32 *) image->data;
+
+ if (!image->width || !image->height)
+ return;
+
+ if (image->depth != 1) {
+ cfb_imageblit(info, image);
+ return;
+ }
+
+ if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR) {
+ fg = image->fg_color;
+ bg = image->bg_color;
+ } else {
+ fg = ((u32 *)info->pseudo_palette)[image->fg_color];
+ bg = ((u32 *)info->pseudo_palette)[image->bg_color];
+ }
+
+ cmd = BCI_CMD_RECT | BCI_CMD_RECT_XP | BCI_CMD_RECT_YP |
+ BCI_CMD_CLIP_LR | BCI_CMD_DEST_GBD | BCI_CMD_SRC_MONO |
+ BCI_CMD_SEND_COLOR;
+
+ par->bci_ptr = 0;
+ BCI_CMD_SET_ROP(cmd, savagefb_rop[0]);
+
+ width = (image->width + 31) & ~31;
+ size = (width * image->height)/8;
+ size >>= 2;
+
+ par->SavageWaitFifo(par, size + 5);
+ BCI_SEND(cmd);
+ BCI_SEND(BCI_CLIP_LR(image->dx, image->dx + image->width - 1));
+ BCI_SEND(fg);
+ BCI_SEND(bg);
+ BCI_SEND(BCI_X_Y(image->dx, image->dy));
+ BCI_SEND(BCI_W_H(width, image->height));
+ for (i = 0; i < size; i++)
+ BCI_SEND(src[i]);
+}
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/savage/savagefb_driver.c b/drivers/video/fbdev/savage/savagefb_driver.c
new file mode 100644
index 0000000000..b5f84bd480
--- /dev/null
+++ b/drivers/video/fbdev/savage/savagefb_driver.c
@@ -0,0 +1,2573 @@
+/*
+ * linux/drivers/video/savagefb.c -- S3 Savage Framebuffer Driver
+ *
+ * Copyright (c) 2001-2002 Denis Oliver Kropp <dok@directfb.org>
+ * Sven Neumann <neo@directfb.org>
+ *
+ *
+ * Card specific code is based on XFree86's savage driver.
+ * Framebuffer framework code is based on code of cyber2000fb and tdfxfb.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * 0.4.0 (neo)
+ * - hardware accelerated clear and move
+ *
+ * 0.3.2 (dok)
+ * - wait for vertical retrace before writing to cr67
+ * at the beginning of savagefb_set_par
+ * - use synchronization registers cr23 and cr26
+ *
+ * 0.3.1 (dok)
+ * - reset 3D engine
+ * - don't return alpha bits for 32bit format
+ *
+ * 0.3.0 (dok)
+ * - added WaitIdle functions for all Savage types
+ * - do WaitIdle before mode switching
+ * - code cleanup
+ *
+ * 0.2.0 (dok)
+ * - first working version
+ *
+ *
+ * TODO
+ * - clock validations in decode_var
+ *
+ * BUGS
+ * - white margin on bootup
+ *
+ */
+
+#include <linux/aperture.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/console.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include "savagefb.h"
+
+
+#define SAVAGEFB_VERSION "0.4.0_2.6"
+
+/* --------------------------------------------------------------------- */
+
+
+static char *mode_option = NULL;
+
+#ifdef MODULE
+
+MODULE_AUTHOR("(c) 2001-2002 Denis Oliver Kropp <dok@directfb.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("FBDev driver for S3 Savage PCI/AGP Chips");
+
+#endif
+
+
+/* --------------------------------------------------------------------- */
+
+static void vgaHWSeqReset(struct savagefb_par *par, int start)
+{
+ if (start)
+ VGAwSEQ(0x00, 0x01, par); /* Synchronous Reset */
+ else
+ VGAwSEQ(0x00, 0x03, par); /* End Reset */
+}
+
+static void vgaHWProtect(struct savagefb_par *par, int on)
+{
+ unsigned char tmp;
+
+ if (on) {
+ /*
+ * Turn off screen and disable sequencer.
+ */
+ tmp = VGArSEQ(0x01, par);
+
+ vgaHWSeqReset(par, 1); /* start synchronous reset */
+ VGAwSEQ(0x01, tmp | 0x20, par);/* disable the display */
+
+ VGAenablePalette(par);
+ } else {
+ /*
+ * Reenable sequencer, then turn on screen.
+ */
+
+ tmp = VGArSEQ(0x01, par);
+
+ VGAwSEQ(0x01, tmp & ~0x20, par);/* reenable display */
+ vgaHWSeqReset(par, 0); /* clear synchronous reset */
+
+ VGAdisablePalette(par);
+ }
+}
+
+static void vgaHWRestore(struct savagefb_par *par, struct savage_reg *reg)
+{
+ int i;
+
+ VGAwMISC(reg->MiscOutReg, par);
+
+ for (i = 1; i < 5; i++)
+ VGAwSEQ(i, reg->Sequencer[i], par);
+
+ /* Ensure CRTC registers 0-7 are unlocked by clearing bit 7 or
+ CRTC[17] */
+ VGAwCR(17, reg->CRTC[17] & ~0x80, par);
+
+ for (i = 0; i < 25; i++)
+ VGAwCR(i, reg->CRTC[i], par);
+
+ for (i = 0; i < 9; i++)
+ VGAwGR(i, reg->Graphics[i], par);
+
+ VGAenablePalette(par);
+
+ for (i = 0; i < 21; i++)
+ VGAwATTR(i, reg->Attribute[i], par);
+
+ VGAdisablePalette(par);
+}
+
+static void vgaHWInit(struct fb_var_screeninfo *var,
+ struct savagefb_par *par,
+ struct xtimings *timings,
+ struct savage_reg *reg)
+{
+ reg->MiscOutReg = 0x23;
+
+ if (!(timings->sync & FB_SYNC_HOR_HIGH_ACT))
+ reg->MiscOutReg |= 0x40;
+
+ if (!(timings->sync & FB_SYNC_VERT_HIGH_ACT))
+ reg->MiscOutReg |= 0x80;
+
+ /*
+ * Time Sequencer
+ */
+ reg->Sequencer[0x00] = 0x00;
+ reg->Sequencer[0x01] = 0x01;
+ reg->Sequencer[0x02] = 0x0F;
+ reg->Sequencer[0x03] = 0x00; /* Font select */
+ reg->Sequencer[0x04] = 0x0E; /* Misc */
+
+ /*
+ * CRTC Controller
+ */
+ reg->CRTC[0x00] = (timings->HTotal >> 3) - 5;
+ reg->CRTC[0x01] = (timings->HDisplay >> 3) - 1;
+ reg->CRTC[0x02] = (timings->HSyncStart >> 3) - 1;
+ reg->CRTC[0x03] = (((timings->HSyncEnd >> 3) - 1) & 0x1f) | 0x80;
+ reg->CRTC[0x04] = (timings->HSyncStart >> 3);
+ reg->CRTC[0x05] = ((((timings->HSyncEnd >> 3) - 1) & 0x20) << 2) |
+ (((timings->HSyncEnd >> 3)) & 0x1f);
+ reg->CRTC[0x06] = (timings->VTotal - 2) & 0xFF;
+ reg->CRTC[0x07] = (((timings->VTotal - 2) & 0x100) >> 8) |
+ (((timings->VDisplay - 1) & 0x100) >> 7) |
+ ((timings->VSyncStart & 0x100) >> 6) |
+ (((timings->VSyncStart - 1) & 0x100) >> 5) |
+ 0x10 |
+ (((timings->VTotal - 2) & 0x200) >> 4) |
+ (((timings->VDisplay - 1) & 0x200) >> 3) |
+ ((timings->VSyncStart & 0x200) >> 2);
+ reg->CRTC[0x08] = 0x00;
+ reg->CRTC[0x09] = (((timings->VSyncStart - 1) & 0x200) >> 4) | 0x40;
+
+ if (timings->dblscan)
+ reg->CRTC[0x09] |= 0x80;
+
+ reg->CRTC[0x0a] = 0x00;
+ reg->CRTC[0x0b] = 0x00;
+ reg->CRTC[0x0c] = 0x00;
+ reg->CRTC[0x0d] = 0x00;
+ reg->CRTC[0x0e] = 0x00;
+ reg->CRTC[0x0f] = 0x00;
+ reg->CRTC[0x10] = timings->VSyncStart & 0xff;
+ reg->CRTC[0x11] = (timings->VSyncEnd & 0x0f) | 0x20;
+ reg->CRTC[0x12] = (timings->VDisplay - 1) & 0xff;
+ reg->CRTC[0x13] = var->xres_virtual >> 4;
+ reg->CRTC[0x14] = 0x00;
+ reg->CRTC[0x15] = (timings->VSyncStart - 1) & 0xff;
+ reg->CRTC[0x16] = (timings->VSyncEnd - 1) & 0xff;
+ reg->CRTC[0x17] = 0xc3;
+ reg->CRTC[0x18] = 0xff;
+
+ /*
+ * are these unnecessary?
+ * vgaHWHBlankKGA(mode, regp, 0, KGA_FIX_OVERSCAN|KGA_ENABLE_ON_ZERO);
+ * vgaHWVBlankKGA(mode, regp, 0, KGA_FIX_OVERSCAN|KGA_ENABLE_ON_ZERO);
+ */
+
+ /*
+ * Graphics Display Controller
+ */
+ reg->Graphics[0x00] = 0x00;
+ reg->Graphics[0x01] = 0x00;
+ reg->Graphics[0x02] = 0x00;
+ reg->Graphics[0x03] = 0x00;
+ reg->Graphics[0x04] = 0x00;
+ reg->Graphics[0x05] = 0x40;
+ reg->Graphics[0x06] = 0x05; /* only map 64k VGA memory !!!! */
+ reg->Graphics[0x07] = 0x0F;
+ reg->Graphics[0x08] = 0xFF;
+
+
+ reg->Attribute[0x00] = 0x00; /* standard colormap translation */
+ reg->Attribute[0x01] = 0x01;
+ reg->Attribute[0x02] = 0x02;
+ reg->Attribute[0x03] = 0x03;
+ reg->Attribute[0x04] = 0x04;
+ reg->Attribute[0x05] = 0x05;
+ reg->Attribute[0x06] = 0x06;
+ reg->Attribute[0x07] = 0x07;
+ reg->Attribute[0x08] = 0x08;
+ reg->Attribute[0x09] = 0x09;
+ reg->Attribute[0x0a] = 0x0A;
+ reg->Attribute[0x0b] = 0x0B;
+ reg->Attribute[0x0c] = 0x0C;
+ reg->Attribute[0x0d] = 0x0D;
+ reg->Attribute[0x0e] = 0x0E;
+ reg->Attribute[0x0f] = 0x0F;
+ reg->Attribute[0x10] = 0x41;
+ reg->Attribute[0x11] = 0xFF;
+ reg->Attribute[0x12] = 0x0F;
+ reg->Attribute[0x13] = 0x00;
+ reg->Attribute[0x14] = 0x00;
+}
+
+/* -------------------- Hardware specific routines ------------------------- */
+
+/*
+ * Hardware Acceleration for SavageFB
+ */
+
+/* Wait for fifo space */
+static void
+savage3D_waitfifo(struct savagefb_par *par, int space)
+{
+ int slots = MAXFIFO - space;
+
+ while ((savage_in32(0x48C00, par) & 0x0000ffff) > slots);
+}
+
+static void
+savage4_waitfifo(struct savagefb_par *par, int space)
+{
+ int slots = MAXFIFO - space;
+
+ while ((savage_in32(0x48C60, par) & 0x001fffff) > slots);
+}
+
+static void
+savage2000_waitfifo(struct savagefb_par *par, int space)
+{
+ int slots = MAXFIFO - space;
+
+ while ((savage_in32(0x48C60, par) & 0x0000ffff) > slots);
+}
+
+/* Wait for idle accelerator */
+static void
+savage3D_waitidle(struct savagefb_par *par)
+{
+ while ((savage_in32(0x48C00, par) & 0x0008ffff) != 0x80000);
+}
+
+static void
+savage4_waitidle(struct savagefb_par *par)
+{
+ while ((savage_in32(0x48C60, par) & 0x00a00000) != 0x00a00000);
+}
+
+static void
+savage2000_waitidle(struct savagefb_par *par)
+{
+ while ((savage_in32(0x48C60, par) & 0x009fffff));
+}
+
+#ifdef CONFIG_FB_SAVAGE_ACCEL
+static void
+SavageSetup2DEngine(struct savagefb_par *par)
+{
+ unsigned long GlobalBitmapDescriptor;
+
+ GlobalBitmapDescriptor = 1 | 8 | BCI_BD_BW_DISABLE;
+ BCI_BD_SET_BPP(GlobalBitmapDescriptor, par->depth);
+ BCI_BD_SET_STRIDE(GlobalBitmapDescriptor, par->vwidth);
+
+ switch(par->chip) {
+ case S3_SAVAGE3D:
+ case S3_SAVAGE_MX:
+ /* Disable BCI */
+ savage_out32(0x48C18, savage_in32(0x48C18, par) & 0x3FF0, par);
+ /* Setup BCI command overflow buffer */
+ savage_out32(0x48C14,
+ (par->cob_offset >> 11) | (par->cob_index << 29),
+ par);
+ /* Program shadow status update. */
+ savage_out32(0x48C10, 0x78207220, par);
+ savage_out32(0x48C0C, 0, par);
+ /* Enable BCI and command overflow buffer */
+ savage_out32(0x48C18, savage_in32(0x48C18, par) | 0x0C, par);
+ break;
+ case S3_SAVAGE4:
+ case S3_TWISTER:
+ case S3_PROSAVAGE:
+ case S3_PROSAVAGEDDR:
+ case S3_SUPERSAVAGE:
+ /* Disable BCI */
+ savage_out32(0x48C18, savage_in32(0x48C18, par) & 0x3FF0, par);
+ /* Program shadow status update */
+ savage_out32(0x48C10, 0x00700040, par);
+ savage_out32(0x48C0C, 0, par);
+ /* Enable BCI without the COB */
+ savage_out32(0x48C18, savage_in32(0x48C18, par) | 0x08, par);
+ break;
+ case S3_SAVAGE2000:
+ /* Disable BCI */
+ savage_out32(0x48C18, 0, par);
+ /* Setup BCI command overflow buffer */
+ savage_out32(0x48C18,
+ (par->cob_offset >> 7) | (par->cob_index),
+ par);
+ /* Disable shadow status update */
+ savage_out32(0x48A30, 0, par);
+ /* Enable BCI and command overflow buffer */
+ savage_out32(0x48C18, savage_in32(0x48C18, par) | 0x00280000,
+ par);
+ break;
+ default:
+ break;
+ }
+ /* Turn on 16-bit register access. */
+ vga_out8(0x3d4, 0x31, par);
+ vga_out8(0x3d5, 0x0c, par);
+
+ /* Set stride to use GBD. */
+ vga_out8(0x3d4, 0x50, par);
+ vga_out8(0x3d5, vga_in8(0x3d5, par) | 0xC1, par);
+
+ /* Enable 2D engine. */
+ vga_out8(0x3d4, 0x40, par);
+ vga_out8(0x3d5, 0x01, par);
+
+ savage_out32(MONO_PAT_0, ~0, par);
+ savage_out32(MONO_PAT_1, ~0, par);
+
+ /* Setup plane masks */
+ savage_out32(0x8128, ~0, par); /* enable all write planes */
+ savage_out32(0x812C, ~0, par); /* enable all read planes */
+ savage_out16(0x8134, 0x27, par);
+ savage_out16(0x8136, 0x07, par);
+
+ /* Now set the GBD */
+ par->bci_ptr = 0;
+ par->SavageWaitFifo(par, 4);
+
+ BCI_SEND(BCI_CMD_SETREG | (1 << 16) | BCI_GBD1);
+ BCI_SEND(0);
+ BCI_SEND(BCI_CMD_SETREG | (1 << 16) | BCI_GBD2);
+ BCI_SEND(GlobalBitmapDescriptor);
+
+ /*
+ * I don't know why, sending this twice fixes the initial black screen,
+ * prevents X from crashing at least in Toshiba laptops with SavageIX.
+ * --Tony
+ */
+ par->bci_ptr = 0;
+ par->SavageWaitFifo(par, 4);
+
+ BCI_SEND(BCI_CMD_SETREG | (1 << 16) | BCI_GBD1);
+ BCI_SEND(0);
+ BCI_SEND(BCI_CMD_SETREG | (1 << 16) | BCI_GBD2);
+ BCI_SEND(GlobalBitmapDescriptor);
+}
+
+static void savagefb_set_clip(struct fb_info *info)
+{
+ struct savagefb_par *par = info->par;
+ int cmd;
+
+ cmd = BCI_CMD_NOP | BCI_CMD_CLIP_NEW;
+ par->bci_ptr = 0;
+ par->SavageWaitFifo(par,3);
+ BCI_SEND(cmd);
+ BCI_SEND(BCI_CLIP_TL(0, 0));
+ BCI_SEND(BCI_CLIP_BR(0xfff, 0xfff));
+}
+#else
+static void SavageSetup2DEngine(struct savagefb_par *par) {}
+
+#endif
+
+static void SavageCalcClock(long freq, int min_m, int min_n1, int max_n1,
+ int min_n2, int max_n2, long freq_min,
+ long freq_max, unsigned int *mdiv,
+ unsigned int *ndiv, unsigned int *r)
+{
+ long diff, best_diff;
+ unsigned int m;
+ unsigned char n1, n2, best_n1=16+2, best_n2=2, best_m=125+2;
+
+ if (freq < freq_min / (1 << max_n2)) {
+ printk(KERN_ERR "invalid frequency %ld Khz\n", freq);
+ freq = freq_min / (1 << max_n2);
+ }
+ if (freq > freq_max / (1 << min_n2)) {
+ printk(KERN_ERR "invalid frequency %ld Khz\n", freq);
+ freq = freq_max / (1 << min_n2);
+ }
+
+ /* work out suitable timings */
+ best_diff = freq;
+
+ for (n2=min_n2; n2<=max_n2; n2++) {
+ for (n1=min_n1+2; n1<=max_n1+2; n1++) {
+ m = (freq * n1 * (1 << n2) + HALF_BASE_FREQ) /
+ BASE_FREQ;
+ if (m < min_m+2 || m > 127+2)
+ continue;
+ if ((m * BASE_FREQ >= freq_min * n1) &&
+ (m * BASE_FREQ <= freq_max * n1)) {
+ diff = freq * (1 << n2) * n1 - BASE_FREQ * m;
+ if (diff < 0)
+ diff = -diff;
+ if (diff < best_diff) {
+ best_diff = diff;
+ best_m = m;
+ best_n1 = n1;
+ best_n2 = n2;
+ }
+ }
+ }
+ }
+
+ *ndiv = best_n1 - 2;
+ *r = best_n2;
+ *mdiv = best_m - 2;
+}
+
+static int common_calc_clock(long freq, int min_m, int min_n1, int max_n1,
+ int min_n2, int max_n2, long freq_min,
+ long freq_max, unsigned char *mdiv,
+ unsigned char *ndiv)
+{
+ long diff, best_diff;
+ unsigned int m;
+ unsigned char n1, n2;
+ unsigned char best_n1 = 16+2, best_n2 = 2, best_m = 125+2;
+
+ best_diff = freq;
+
+ for (n2 = min_n2; n2 <= max_n2; n2++) {
+ for (n1 = min_n1+2; n1 <= max_n1+2; n1++) {
+ m = (freq * n1 * (1 << n2) + HALF_BASE_FREQ) /
+ BASE_FREQ;
+ if (m < min_m + 2 || m > 127+2)
+ continue;
+ if ((m * BASE_FREQ >= freq_min * n1) &&
+ (m * BASE_FREQ <= freq_max * n1)) {
+ diff = freq * (1 << n2) * n1 - BASE_FREQ * m;
+ if (diff < 0)
+ diff = -diff;
+ if (diff < best_diff) {
+ best_diff = diff;
+ best_m = m;
+ best_n1 = n1;
+ best_n2 = n2;
+ }
+ }
+ }
+ }
+
+ if (max_n1 == 63)
+ *ndiv = (best_n1 - 2) | (best_n2 << 6);
+ else
+ *ndiv = (best_n1 - 2) | (best_n2 << 5);
+
+ *mdiv = best_m - 2;
+
+ return 0;
+}
+
+#ifdef SAVAGEFB_DEBUG
+/* This function is used to debug, it prints out the contents of s3 regs */
+
+static void SavagePrintRegs(struct savagefb_par *par)
+{
+ unsigned char i;
+ int vgaCRIndex = 0x3d4;
+ int vgaCRReg = 0x3d5;
+
+ printk(KERN_DEBUG "SR x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE "
+ "xF");
+
+ for (i = 0; i < 0x70; i++) {
+ if (!(i % 16))
+ printk(KERN_DEBUG "\nSR%xx ", i >> 4);
+ vga_out8(0x3c4, i, par);
+ printk(KERN_DEBUG " %02x", vga_in8(0x3c5, par));
+ }
+
+ printk(KERN_DEBUG "\n\nCR x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC "
+ "xD xE xF");
+
+ for (i = 0; i < 0xB7; i++) {
+ if (!(i % 16))
+ printk(KERN_DEBUG "\nCR%xx ", i >> 4);
+ vga_out8(vgaCRIndex, i, par);
+ printk(KERN_DEBUG " %02x", vga_in8(vgaCRReg, par));
+ }
+
+ printk(KERN_DEBUG "\n\n");
+}
+#endif
+
+/* --------------------------------------------------------------------- */
+
+static void savage_get_default_par(struct savagefb_par *par, struct savage_reg *reg)
+{
+ unsigned char cr3a, cr53, cr66;
+
+ vga_out16(0x3d4, 0x4838, par);
+ vga_out16(0x3d4, 0xa039, par);
+ vga_out16(0x3c4, 0x0608, par);
+
+ vga_out8(0x3d4, 0x66, par);
+ cr66 = vga_in8(0x3d5, par);
+ vga_out8(0x3d5, cr66 | 0x80, par);
+ vga_out8(0x3d4, 0x3a, par);
+ cr3a = vga_in8(0x3d5, par);
+ vga_out8(0x3d5, cr3a | 0x80, par);
+ vga_out8(0x3d4, 0x53, par);
+ cr53 = vga_in8(0x3d5, par);
+ vga_out8(0x3d5, cr53 & 0x7f, par);
+
+ vga_out8(0x3d4, 0x66, par);
+ vga_out8(0x3d5, cr66, par);
+ vga_out8(0x3d4, 0x3a, par);
+ vga_out8(0x3d5, cr3a, par);
+
+ vga_out8(0x3d4, 0x66, par);
+ vga_out8(0x3d5, cr66, par);
+ vga_out8(0x3d4, 0x3a, par);
+ vga_out8(0x3d5, cr3a, par);
+
+ /* unlock extended seq regs */
+ vga_out8(0x3c4, 0x08, par);
+ reg->SR08 = vga_in8(0x3c5, par);
+ vga_out8(0x3c5, 0x06, par);
+
+ /* now save all the extended regs we need */
+ vga_out8(0x3d4, 0x31, par);
+ reg->CR31 = vga_in8(0x3d5, par);
+ vga_out8(0x3d4, 0x32, par);
+ reg->CR32 = vga_in8(0x3d5, par);
+ vga_out8(0x3d4, 0x34, par);
+ reg->CR34 = vga_in8(0x3d5, par);
+ vga_out8(0x3d4, 0x36, par);
+ reg->CR36 = vga_in8(0x3d5, par);
+ vga_out8(0x3d4, 0x3a, par);
+ reg->CR3A = vga_in8(0x3d5, par);
+ vga_out8(0x3d4, 0x40, par);
+ reg->CR40 = vga_in8(0x3d5, par);
+ vga_out8(0x3d4, 0x42, par);
+ reg->CR42 = vga_in8(0x3d5, par);
+ vga_out8(0x3d4, 0x45, par);
+ reg->CR45 = vga_in8(0x3d5, par);
+ vga_out8(0x3d4, 0x50, par);
+ reg->CR50 = vga_in8(0x3d5, par);
+ vga_out8(0x3d4, 0x51, par);
+ reg->CR51 = vga_in8(0x3d5, par);
+ vga_out8(0x3d4, 0x53, par);
+ reg->CR53 = vga_in8(0x3d5, par);
+ vga_out8(0x3d4, 0x58, par);
+ reg->CR58 = vga_in8(0x3d5, par);
+ vga_out8(0x3d4, 0x60, par);
+ reg->CR60 = vga_in8(0x3d5, par);
+ vga_out8(0x3d4, 0x66, par);
+ reg->CR66 = vga_in8(0x3d5, par);
+ vga_out8(0x3d4, 0x67, par);
+ reg->CR67 = vga_in8(0x3d5, par);
+ vga_out8(0x3d4, 0x68, par);
+ reg->CR68 = vga_in8(0x3d5, par);
+ vga_out8(0x3d4, 0x69, par);
+ reg->CR69 = vga_in8(0x3d5, par);
+ vga_out8(0x3d4, 0x6f, par);
+ reg->CR6F = vga_in8(0x3d5, par);
+
+ vga_out8(0x3d4, 0x33, par);
+ reg->CR33 = vga_in8(0x3d5, par);
+ vga_out8(0x3d4, 0x86, par);
+ reg->CR86 = vga_in8(0x3d5, par);
+ vga_out8(0x3d4, 0x88, par);
+ reg->CR88 = vga_in8(0x3d5, par);
+ vga_out8(0x3d4, 0x90, par);
+ reg->CR90 = vga_in8(0x3d5, par);
+ vga_out8(0x3d4, 0x91, par);
+ reg->CR91 = vga_in8(0x3d5, par);
+ vga_out8(0x3d4, 0xb0, par);
+ reg->CRB0 = vga_in8(0x3d5, par) | 0x80;
+
+ /* extended mode timing regs */
+ vga_out8(0x3d4, 0x3b, par);
+ reg->CR3B = vga_in8(0x3d5, par);
+ vga_out8(0x3d4, 0x3c, par);
+ reg->CR3C = vga_in8(0x3d5, par);
+ vga_out8(0x3d4, 0x43, par);
+ reg->CR43 = vga_in8(0x3d5, par);
+ vga_out8(0x3d4, 0x5d, par);
+ reg->CR5D = vga_in8(0x3d5, par);
+ vga_out8(0x3d4, 0x5e, par);
+ reg->CR5E = vga_in8(0x3d5, par);
+ vga_out8(0x3d4, 0x65, par);
+ reg->CR65 = vga_in8(0x3d5, par);
+
+ /* save seq extended regs for DCLK PLL programming */
+ vga_out8(0x3c4, 0x0e, par);
+ reg->SR0E = vga_in8(0x3c5, par);
+ vga_out8(0x3c4, 0x0f, par);
+ reg->SR0F = vga_in8(0x3c5, par);
+ vga_out8(0x3c4, 0x10, par);
+ reg->SR10 = vga_in8(0x3c5, par);
+ vga_out8(0x3c4, 0x11, par);
+ reg->SR11 = vga_in8(0x3c5, par);
+ vga_out8(0x3c4, 0x12, par);
+ reg->SR12 = vga_in8(0x3c5, par);
+ vga_out8(0x3c4, 0x13, par);
+ reg->SR13 = vga_in8(0x3c5, par);
+ vga_out8(0x3c4, 0x29, par);
+ reg->SR29 = vga_in8(0x3c5, par);
+
+ vga_out8(0x3c4, 0x15, par);
+ reg->SR15 = vga_in8(0x3c5, par);
+ vga_out8(0x3c4, 0x30, par);
+ reg->SR30 = vga_in8(0x3c5, par);
+ vga_out8(0x3c4, 0x18, par);
+ reg->SR18 = vga_in8(0x3c5, par);
+
+ /* Save flat panel expansion registers. */
+ if (par->chip == S3_SAVAGE_MX) {
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ vga_out8(0x3c4, 0x54+i, par);
+ reg->SR54[i] = vga_in8(0x3c5, par);
+ }
+ }
+
+ vga_out8(0x3d4, 0x66, par);
+ cr66 = vga_in8(0x3d5, par);
+ vga_out8(0x3d5, cr66 | 0x80, par);
+ vga_out8(0x3d4, 0x3a, par);
+ cr3a = vga_in8(0x3d5, par);
+ vga_out8(0x3d5, cr3a | 0x80, par);
+
+ /* now save MIU regs */
+ if (par->chip != S3_SAVAGE_MX) {
+ reg->MMPR0 = savage_in32(FIFO_CONTROL_REG, par);
+ reg->MMPR1 = savage_in32(MIU_CONTROL_REG, par);
+ reg->MMPR2 = savage_in32(STREAMS_TIMEOUT_REG, par);
+ reg->MMPR3 = savage_in32(MISC_TIMEOUT_REG, par);
+ }
+
+ vga_out8(0x3d4, 0x3a, par);
+ vga_out8(0x3d5, cr3a, par);
+ vga_out8(0x3d4, 0x66, par);
+ vga_out8(0x3d5, cr66, par);
+}
+
+static void savage_set_default_par(struct savagefb_par *par,
+ struct savage_reg *reg)
+{
+ unsigned char cr3a, cr53, cr66;
+
+ vga_out16(0x3d4, 0x4838, par);
+ vga_out16(0x3d4, 0xa039, par);
+ vga_out16(0x3c4, 0x0608, par);
+
+ vga_out8(0x3d4, 0x66, par);
+ cr66 = vga_in8(0x3d5, par);
+ vga_out8(0x3d5, cr66 | 0x80, par);
+ vga_out8(0x3d4, 0x3a, par);
+ cr3a = vga_in8(0x3d5, par);
+ vga_out8(0x3d5, cr3a | 0x80, par);
+ vga_out8(0x3d4, 0x53, par);
+ cr53 = vga_in8(0x3d5, par);
+ vga_out8(0x3d5, cr53 & 0x7f, par);
+
+ vga_out8(0x3d4, 0x66, par);
+ vga_out8(0x3d5, cr66, par);
+ vga_out8(0x3d4, 0x3a, par);
+ vga_out8(0x3d5, cr3a, par);
+
+ vga_out8(0x3d4, 0x66, par);
+ vga_out8(0x3d5, cr66, par);
+ vga_out8(0x3d4, 0x3a, par);
+ vga_out8(0x3d5, cr3a, par);
+
+ /* unlock extended seq regs */
+ vga_out8(0x3c4, 0x08, par);
+ vga_out8(0x3c5, reg->SR08, par);
+ vga_out8(0x3c5, 0x06, par);
+
+ /* now restore all the extended regs we need */
+ vga_out8(0x3d4, 0x31, par);
+ vga_out8(0x3d5, reg->CR31, par);
+ vga_out8(0x3d4, 0x32, par);
+ vga_out8(0x3d5, reg->CR32, par);
+ vga_out8(0x3d4, 0x34, par);
+ vga_out8(0x3d5, reg->CR34, par);
+ vga_out8(0x3d4, 0x36, par);
+ vga_out8(0x3d5,reg->CR36, par);
+ vga_out8(0x3d4, 0x3a, par);
+ vga_out8(0x3d5, reg->CR3A, par);
+ vga_out8(0x3d4, 0x40, par);
+ vga_out8(0x3d5, reg->CR40, par);
+ vga_out8(0x3d4, 0x42, par);
+ vga_out8(0x3d5, reg->CR42, par);
+ vga_out8(0x3d4, 0x45, par);
+ vga_out8(0x3d5, reg->CR45, par);
+ vga_out8(0x3d4, 0x50, par);
+ vga_out8(0x3d5, reg->CR50, par);
+ vga_out8(0x3d4, 0x51, par);
+ vga_out8(0x3d5, reg->CR51, par);
+ vga_out8(0x3d4, 0x53, par);
+ vga_out8(0x3d5, reg->CR53, par);
+ vga_out8(0x3d4, 0x58, par);
+ vga_out8(0x3d5, reg->CR58, par);
+ vga_out8(0x3d4, 0x60, par);
+ vga_out8(0x3d5, reg->CR60, par);
+ vga_out8(0x3d4, 0x66, par);
+ vga_out8(0x3d5, reg->CR66, par);
+ vga_out8(0x3d4, 0x67, par);
+ vga_out8(0x3d5, reg->CR67, par);
+ vga_out8(0x3d4, 0x68, par);
+ vga_out8(0x3d5, reg->CR68, par);
+ vga_out8(0x3d4, 0x69, par);
+ vga_out8(0x3d5, reg->CR69, par);
+ vga_out8(0x3d4, 0x6f, par);
+ vga_out8(0x3d5, reg->CR6F, par);
+
+ vga_out8(0x3d4, 0x33, par);
+ vga_out8(0x3d5, reg->CR33, par);
+ vga_out8(0x3d4, 0x86, par);
+ vga_out8(0x3d5, reg->CR86, par);
+ vga_out8(0x3d4, 0x88, par);
+ vga_out8(0x3d5, reg->CR88, par);
+ vga_out8(0x3d4, 0x90, par);
+ vga_out8(0x3d5, reg->CR90, par);
+ vga_out8(0x3d4, 0x91, par);
+ vga_out8(0x3d5, reg->CR91, par);
+ vga_out8(0x3d4, 0xb0, par);
+ vga_out8(0x3d5, reg->CRB0, par);
+
+ /* extended mode timing regs */
+ vga_out8(0x3d4, 0x3b, par);
+ vga_out8(0x3d5, reg->CR3B, par);
+ vga_out8(0x3d4, 0x3c, par);
+ vga_out8(0x3d5, reg->CR3C, par);
+ vga_out8(0x3d4, 0x43, par);
+ vga_out8(0x3d5, reg->CR43, par);
+ vga_out8(0x3d4, 0x5d, par);
+ vga_out8(0x3d5, reg->CR5D, par);
+ vga_out8(0x3d4, 0x5e, par);
+ vga_out8(0x3d5, reg->CR5E, par);
+ vga_out8(0x3d4, 0x65, par);
+ vga_out8(0x3d5, reg->CR65, par);
+
+ /* save seq extended regs for DCLK PLL programming */
+ vga_out8(0x3c4, 0x0e, par);
+ vga_out8(0x3c5, reg->SR0E, par);
+ vga_out8(0x3c4, 0x0f, par);
+ vga_out8(0x3c5, reg->SR0F, par);
+ vga_out8(0x3c4, 0x10, par);
+ vga_out8(0x3c5, reg->SR10, par);
+ vga_out8(0x3c4, 0x11, par);
+ vga_out8(0x3c5, reg->SR11, par);
+ vga_out8(0x3c4, 0x12, par);
+ vga_out8(0x3c5, reg->SR12, par);
+ vga_out8(0x3c4, 0x13, par);
+ vga_out8(0x3c5, reg->SR13, par);
+ vga_out8(0x3c4, 0x29, par);
+ vga_out8(0x3c5, reg->SR29, par);
+
+ vga_out8(0x3c4, 0x15, par);
+ vga_out8(0x3c5, reg->SR15, par);
+ vga_out8(0x3c4, 0x30, par);
+ vga_out8(0x3c5, reg->SR30, par);
+ vga_out8(0x3c4, 0x18, par);
+ vga_out8(0x3c5, reg->SR18, par);
+
+ /* Save flat panel expansion registers. */
+ if (par->chip == S3_SAVAGE_MX) {
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ vga_out8(0x3c4, 0x54+i, par);
+ vga_out8(0x3c5, reg->SR54[i], par);
+ }
+ }
+
+ vga_out8(0x3d4, 0x66, par);
+ cr66 = vga_in8(0x3d5, par);
+ vga_out8(0x3d5, cr66 | 0x80, par);
+ vga_out8(0x3d4, 0x3a, par);
+ cr3a = vga_in8(0x3d5, par);
+ vga_out8(0x3d5, cr3a | 0x80, par);
+
+ /* now save MIU regs */
+ if (par->chip != S3_SAVAGE_MX) {
+ savage_out32(FIFO_CONTROL_REG, reg->MMPR0, par);
+ savage_out32(MIU_CONTROL_REG, reg->MMPR1, par);
+ savage_out32(STREAMS_TIMEOUT_REG, reg->MMPR2, par);
+ savage_out32(MISC_TIMEOUT_REG, reg->MMPR3, par);
+ }
+
+ vga_out8(0x3d4, 0x3a, par);
+ vga_out8(0x3d5, cr3a, par);
+ vga_out8(0x3d4, 0x66, par);
+ vga_out8(0x3d5, cr66, par);
+}
+
+static void savage_update_var(struct fb_var_screeninfo *var,
+ const struct fb_videomode *modedb)
+{
+ var->xres = var->xres_virtual = modedb->xres;
+ var->yres = modedb->yres;
+ if (var->yres_virtual < var->yres)
+ var->yres_virtual = var->yres;
+ var->xoffset = var->yoffset = 0;
+ var->pixclock = modedb->pixclock;
+ var->left_margin = modedb->left_margin;
+ var->right_margin = modedb->right_margin;
+ var->upper_margin = modedb->upper_margin;
+ var->lower_margin = modedb->lower_margin;
+ var->hsync_len = modedb->hsync_len;
+ var->vsync_len = modedb->vsync_len;
+ var->sync = modedb->sync;
+ var->vmode = modedb->vmode;
+}
+
+static int savagefb_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ struct savagefb_par *par = info->par;
+ int memlen, vramlen, mode_valid = 0;
+
+ DBG("savagefb_check_var");
+
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ switch (var->bits_per_pixel) {
+ case 8:
+ var->red.offset = var->green.offset =
+ var->blue.offset = 0;
+ var->red.length = var->green.length =
+ var->blue.length = var->bits_per_pixel;
+ break;
+ case 16:
+ var->red.offset = 11;
+ var->red.length = 5;
+ var->green.offset = 5;
+ var->green.length = 6;
+ var->blue.offset = 0;
+ var->blue.length = 5;
+ break;
+ case 32:
+ var->transp.offset = 24;
+ var->transp.length = 8;
+ var->red.offset = 16;
+ var->red.length = 8;
+ var->green.offset = 8;
+ var->green.length = 8;
+ var->blue.offset = 0;
+ var->blue.length = 8;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ if (!info->monspecs.hfmax || !info->monspecs.vfmax ||
+ !info->monspecs.dclkmax || !fb_validate_mode(var, info))
+ mode_valid = 1;
+
+ /* calculate modeline if supported by monitor */
+ if (!mode_valid && info->monspecs.gtf) {
+ if (!fb_get_mode(FB_MAXTIMINGS, 0, var, info))
+ mode_valid = 1;
+ }
+
+ if (!mode_valid) {
+ const struct fb_videomode *mode;
+
+ mode = fb_find_best_mode(var, &info->modelist);
+ if (mode) {
+ savage_update_var(var, mode);
+ mode_valid = 1;
+ }
+ }
+
+ if (!mode_valid && info->monspecs.modedb_len)
+ return -EINVAL;
+
+ /* Is the mode larger than the LCD panel? */
+ if (par->SavagePanelWidth &&
+ (var->xres > par->SavagePanelWidth ||
+ var->yres > par->SavagePanelHeight)) {
+ printk(KERN_INFO "Mode (%dx%d) larger than the LCD panel "
+ "(%dx%d)\n", var->xres, var->yres,
+ par->SavagePanelWidth,
+ par->SavagePanelHeight);
+ return -1;
+ }
+
+ if (var->yres_virtual < var->yres)
+ var->yres_virtual = var->yres;
+ if (var->xres_virtual < var->xres)
+ var->xres_virtual = var->xres;
+
+ vramlen = info->fix.smem_len;
+
+ memlen = var->xres_virtual * var->bits_per_pixel *
+ var->yres_virtual / 8;
+ if (memlen > vramlen) {
+ var->yres_virtual = vramlen * 8 /
+ (var->xres_virtual * var->bits_per_pixel);
+ memlen = var->xres_virtual * var->bits_per_pixel *
+ var->yres_virtual / 8;
+ }
+
+ /* we must round yres/xres down, we already rounded y/xres_virtual up
+ if it was possible. We should return -EINVAL, but I disagree */
+ if (var->yres_virtual < var->yres)
+ var->yres = var->yres_virtual;
+ if (var->xres_virtual < var->xres)
+ var->xres = var->xres_virtual;
+ if (var->xoffset + var->xres > var->xres_virtual)
+ var->xoffset = var->xres_virtual - var->xres;
+ if (var->yoffset + var->yres > var->yres_virtual)
+ var->yoffset = var->yres_virtual - var->yres;
+
+ return 0;
+}
+
+
+static int savagefb_decode_var(struct fb_var_screeninfo *var,
+ struct savagefb_par *par,
+ struct savage_reg *reg)
+{
+ struct xtimings timings;
+ int width, dclk, i, j; /*, refresh; */
+ unsigned int m, n, r;
+ unsigned char tmp = 0;
+ unsigned int pixclock = var->pixclock;
+
+ DBG("savagefb_decode_var");
+
+ memset(&timings, 0, sizeof(timings));
+
+ if (!pixclock) pixclock = 10000; /* 10ns = 100MHz */
+ timings.Clock = 1000000000 / pixclock;
+ if (timings.Clock < 1) timings.Clock = 1;
+ timings.dblscan = var->vmode & FB_VMODE_DOUBLE;
+ timings.interlaced = var->vmode & FB_VMODE_INTERLACED;
+ timings.HDisplay = var->xres;
+ timings.HSyncStart = timings.HDisplay + var->right_margin;
+ timings.HSyncEnd = timings.HSyncStart + var->hsync_len;
+ timings.HTotal = timings.HSyncEnd + var->left_margin;
+ timings.VDisplay = var->yres;
+ timings.VSyncStart = timings.VDisplay + var->lower_margin;
+ timings.VSyncEnd = timings.VSyncStart + var->vsync_len;
+ timings.VTotal = timings.VSyncEnd + var->upper_margin;
+ timings.sync = var->sync;
+
+
+ par->depth = var->bits_per_pixel;
+ par->vwidth = var->xres_virtual;
+
+ if (var->bits_per_pixel == 16 && par->chip == S3_SAVAGE3D) {
+ timings.HDisplay *= 2;
+ timings.HSyncStart *= 2;
+ timings.HSyncEnd *= 2;
+ timings.HTotal *= 2;
+ }
+
+ /*
+ * This will allocate the datastructure and initialize all of the
+ * generic VGA registers.
+ */
+ vgaHWInit(var, par, &timings, reg);
+
+ /* We need to set CR67 whether or not we use the BIOS. */
+
+ dclk = timings.Clock;
+ reg->CR67 = 0x00;
+
+ switch(var->bits_per_pixel) {
+ case 8:
+ if ((par->chip == S3_SAVAGE2000) && (dclk >= 230000))
+ reg->CR67 = 0x10; /* 8bpp, 2 pixels/clock */
+ else
+ reg->CR67 = 0x00; /* 8bpp, 1 pixel/clock */
+ break;
+ case 15:
+ if (S3_SAVAGE_MOBILE_SERIES(par->chip) ||
+ ((par->chip == S3_SAVAGE2000) && (dclk >= 230000)))
+ reg->CR67 = 0x30; /* 15bpp, 2 pixel/clock */
+ else
+ reg->CR67 = 0x20; /* 15bpp, 1 pixels/clock */
+ break;
+ case 16:
+ if (S3_SAVAGE_MOBILE_SERIES(par->chip) ||
+ ((par->chip == S3_SAVAGE2000) && (dclk >= 230000)))
+ reg->CR67 = 0x50; /* 16bpp, 2 pixel/clock */
+ else
+ reg->CR67 = 0x40; /* 16bpp, 1 pixels/clock */
+ break;
+ case 24:
+ reg->CR67 = 0x70;
+ break;
+ case 32:
+ reg->CR67 = 0xd0;
+ break;
+ }
+
+ /*
+ * Either BIOS use is disabled, or we failed to find a suitable
+ * match. Fall back to traditional register-crunching.
+ */
+
+ vga_out8(0x3d4, 0x3a, par);
+ tmp = vga_in8(0x3d5, par);
+ if (1 /*FIXME:psav->pci_burst*/)
+ reg->CR3A = (tmp & 0x7f) | 0x15;
+ else
+ reg->CR3A = tmp | 0x95;
+
+ reg->CR53 = 0x00;
+ reg->CR31 = 0x8c;
+ reg->CR66 = 0x89;
+
+ vga_out8(0x3d4, 0x58, par);
+ reg->CR58 = vga_in8(0x3d5, par) & 0x80;
+ reg->CR58 |= 0x13;
+
+ reg->SR15 = 0x03 | 0x80;
+ reg->SR18 = 0x00;
+ reg->CR43 = reg->CR45 = reg->CR65 = 0x00;
+
+ vga_out8(0x3d4, 0x40, par);
+ reg->CR40 = vga_in8(0x3d5, par) & ~0x01;
+
+ reg->MMPR0 = 0x010400;
+ reg->MMPR1 = 0x00;
+ reg->MMPR2 = 0x0808;
+ reg->MMPR3 = 0x08080810;
+
+ SavageCalcClock(dclk, 1, 1, 127, 0, 4, 180000, 360000, &m, &n, &r);
+ /* m = 107; n = 4; r = 2; */
+
+ if (par->MCLK <= 0) {
+ reg->SR10 = 255;
+ reg->SR11 = 255;
+ } else {
+ common_calc_clock(par->MCLK, 1, 1, 31, 0, 3, 135000, 270000,
+ &reg->SR11, &reg->SR10);
+ /* reg->SR10 = 80; // MCLK == 286000 */
+ /* reg->SR11 = 125; */
+ }
+
+ reg->SR12 = (r << 6) | (n & 0x3f);
+ reg->SR13 = m & 0xff;
+ reg->SR29 = (r & 4) | (m & 0x100) >> 5 | (n & 0x40) >> 2;
+
+ if (var->bits_per_pixel < 24)
+ reg->MMPR0 -= 0x8000;
+ else
+ reg->MMPR0 -= 0x4000;
+
+ if (timings.interlaced)
+ reg->CR42 = 0x20;
+ else
+ reg->CR42 = 0x00;
+
+ reg->CR34 = 0x10; /* display fifo */
+
+ i = ((((timings.HTotal >> 3) - 5) & 0x100) >> 8) |
+ ((((timings.HDisplay >> 3) - 1) & 0x100) >> 7) |
+ ((((timings.HSyncStart >> 3) - 1) & 0x100) >> 6) |
+ ((timings.HSyncStart & 0x800) >> 7);
+
+ if ((timings.HSyncEnd >> 3) - (timings.HSyncStart >> 3) > 64)
+ i |= 0x08;
+ if ((timings.HSyncEnd >> 3) - (timings.HSyncStart >> 3) > 32)
+ i |= 0x20;
+
+ j = (reg->CRTC[0] + ((i & 0x01) << 8) +
+ reg->CRTC[4] + ((i & 0x10) << 4) + 1) / 2;
+
+ if (j - (reg->CRTC[4] + ((i & 0x10) << 4)) < 4) {
+ if (reg->CRTC[4] + ((i & 0x10) << 4) + 4 <=
+ reg->CRTC[0] + ((i & 0x01) << 8))
+ j = reg->CRTC[4] + ((i & 0x10) << 4) + 4;
+ else
+ j = reg->CRTC[0] + ((i & 0x01) << 8) + 1;
+ }
+
+ reg->CR3B = j & 0xff;
+ i |= (j & 0x100) >> 2;
+ reg->CR3C = (reg->CRTC[0] + ((i & 0x01) << 8)) / 2;
+ reg->CR5D = i;
+ reg->CR5E = (((timings.VTotal - 2) & 0x400) >> 10) |
+ (((timings.VDisplay - 1) & 0x400) >> 9) |
+ (((timings.VSyncStart) & 0x400) >> 8) |
+ (((timings.VSyncStart) & 0x400) >> 6) | 0x40;
+ width = (var->xres_virtual * ((var->bits_per_pixel+7) / 8)) >> 3;
+ reg->CR91 = reg->CRTC[19] = 0xff & width;
+ reg->CR51 = (0x300 & width) >> 4;
+ reg->CR90 = 0x80 | (width >> 8);
+ reg->MiscOutReg |= 0x0c;
+
+ /* Set frame buffer description. */
+
+ if (var->bits_per_pixel <= 8)
+ reg->CR50 = 0;
+ else if (var->bits_per_pixel <= 16)
+ reg->CR50 = 0x10;
+ else
+ reg->CR50 = 0x30;
+
+ if (var->xres_virtual <= 640)
+ reg->CR50 |= 0x40;
+ else if (var->xres_virtual == 800)
+ reg->CR50 |= 0x80;
+ else if (var->xres_virtual == 1024)
+ reg->CR50 |= 0x00;
+ else if (var->xres_virtual == 1152)
+ reg->CR50 |= 0x01;
+ else if (var->xres_virtual == 1280)
+ reg->CR50 |= 0xc0;
+ else if (var->xres_virtual == 1600)
+ reg->CR50 |= 0x81;
+ else
+ reg->CR50 |= 0xc1; /* Use GBD */
+
+ if (par->chip == S3_SAVAGE2000)
+ reg->CR33 = 0x08;
+ else
+ reg->CR33 = 0x20;
+
+ reg->CRTC[0x17] = 0xeb;
+
+ reg->CR67 |= 1;
+
+ vga_out8(0x3d4, 0x36, par);
+ reg->CR36 = vga_in8(0x3d5, par);
+ vga_out8(0x3d4, 0x68, par);
+ reg->CR68 = vga_in8(0x3d5, par);
+ reg->CR69 = 0;
+ vga_out8(0x3d4, 0x6f, par);
+ reg->CR6F = vga_in8(0x3d5, par);
+ vga_out8(0x3d4, 0x86, par);
+ reg->CR86 = vga_in8(0x3d5, par);
+ vga_out8(0x3d4, 0x88, par);
+ reg->CR88 = vga_in8(0x3d5, par) | 0x08;
+ vga_out8(0x3d4, 0xb0, par);
+ reg->CRB0 = vga_in8(0x3d5, par) | 0x80;
+
+ return 0;
+}
+
+/* --------------------------------------------------------------------- */
+
+/*
+ * Set a single color register. Return != 0 for invalid regno.
+ */
+static int savagefb_setcolreg(unsigned regno,
+ unsigned red,
+ unsigned green,
+ unsigned blue,
+ unsigned transp,
+ struct fb_info *info)
+{
+ struct savagefb_par *par = info->par;
+
+ if (regno >= NR_PALETTE)
+ return -EINVAL;
+
+ par->palette[regno].red = red;
+ par->palette[regno].green = green;
+ par->palette[regno].blue = blue;
+ par->palette[regno].transp = transp;
+
+ switch (info->var.bits_per_pixel) {
+ case 8:
+ vga_out8(0x3c8, regno, par);
+
+ vga_out8(0x3c9, red >> 10, par);
+ vga_out8(0x3c9, green >> 10, par);
+ vga_out8(0x3c9, blue >> 10, par);
+ break;
+
+ case 16:
+ if (regno < 16)
+ ((u32 *)info->pseudo_palette)[regno] =
+ ((red & 0xf800) ) |
+ ((green & 0xfc00) >> 5) |
+ ((blue & 0xf800) >> 11);
+ break;
+
+ case 24:
+ if (regno < 16)
+ ((u32 *)info->pseudo_palette)[regno] =
+ ((red & 0xff00) << 8) |
+ ((green & 0xff00) ) |
+ ((blue & 0xff00) >> 8);
+ break;
+ case 32:
+ if (regno < 16)
+ ((u32 *)info->pseudo_palette)[regno] =
+ ((transp & 0xff00) << 16) |
+ ((red & 0xff00) << 8) |
+ ((green & 0xff00) ) |
+ ((blue & 0xff00) >> 8);
+ break;
+
+ default:
+ return 1;
+ }
+
+ return 0;
+}
+
+static void savagefb_set_par_int(struct savagefb_par *par, struct savage_reg *reg)
+{
+ unsigned char tmp, cr3a, cr66, cr67;
+
+ DBG("savagefb_set_par_int");
+
+ par->SavageWaitIdle(par);
+
+ vga_out8(0x3c2, 0x23, par);
+
+ vga_out16(0x3d4, 0x4838, par);
+ vga_out16(0x3d4, 0xa539, par);
+ vga_out16(0x3c4, 0x0608, par);
+
+ vgaHWProtect(par, 1);
+
+ /*
+ * Some Savage/MX and /IX systems go nuts when trying to exit the
+ * server after WindowMaker has displayed a gradient background. I
+ * haven't been able to find what causes it, but a non-destructive
+ * switch to mode 3 here seems to eliminate the issue.
+ */
+
+ VerticalRetraceWait(par);
+ vga_out8(0x3d4, 0x67, par);
+ cr67 = vga_in8(0x3d5, par);
+ vga_out8(0x3d5, cr67/*par->CR67*/ & ~0x0c, par); /* no STREAMS yet */
+
+ vga_out8(0x3d4, 0x23, par);
+ vga_out8(0x3d5, 0x00, par);
+ vga_out8(0x3d4, 0x26, par);
+ vga_out8(0x3d5, 0x00, par);
+
+ /* restore extended regs */
+ vga_out8(0x3d4, 0x66, par);
+ vga_out8(0x3d5, reg->CR66, par);
+ vga_out8(0x3d4, 0x3a, par);
+ vga_out8(0x3d5, reg->CR3A, par);
+ vga_out8(0x3d4, 0x31, par);
+ vga_out8(0x3d5, reg->CR31, par);
+ vga_out8(0x3d4, 0x32, par);
+ vga_out8(0x3d5, reg->CR32, par);
+ vga_out8(0x3d4, 0x58, par);
+ vga_out8(0x3d5, reg->CR58, par);
+ vga_out8(0x3d4, 0x53, par);
+ vga_out8(0x3d5, reg->CR53 & 0x7f, par);
+
+ vga_out16(0x3c4, 0x0608, par);
+
+ /* Restore DCLK registers. */
+
+ vga_out8(0x3c4, 0x0e, par);
+ vga_out8(0x3c5, reg->SR0E, par);
+ vga_out8(0x3c4, 0x0f, par);
+ vga_out8(0x3c5, reg->SR0F, par);
+ vga_out8(0x3c4, 0x29, par);
+ vga_out8(0x3c5, reg->SR29, par);
+ vga_out8(0x3c4, 0x15, par);
+ vga_out8(0x3c5, reg->SR15, par);
+
+ /* Restore flat panel expansion registers. */
+ if (par->chip == S3_SAVAGE_MX) {
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ vga_out8(0x3c4, 0x54+i, par);
+ vga_out8(0x3c5, reg->SR54[i], par);
+ }
+ }
+
+ vgaHWRestore (par, reg);
+
+ /* extended mode timing registers */
+ vga_out8(0x3d4, 0x53, par);
+ vga_out8(0x3d5, reg->CR53, par);
+ vga_out8(0x3d4, 0x5d, par);
+ vga_out8(0x3d5, reg->CR5D, par);
+ vga_out8(0x3d4, 0x5e, par);
+ vga_out8(0x3d5, reg->CR5E, par);
+ vga_out8(0x3d4, 0x3b, par);
+ vga_out8(0x3d5, reg->CR3B, par);
+ vga_out8(0x3d4, 0x3c, par);
+ vga_out8(0x3d5, reg->CR3C, par);
+ vga_out8(0x3d4, 0x43, par);
+ vga_out8(0x3d5, reg->CR43, par);
+ vga_out8(0x3d4, 0x65, par);
+ vga_out8(0x3d5, reg->CR65, par);
+
+ /* restore the desired video mode with cr67 */
+ vga_out8(0x3d4, 0x67, par);
+ /* following part not present in X11 driver */
+ cr67 = vga_in8(0x3d5, par) & 0xf;
+ vga_out8(0x3d5, 0x50 | cr67, par);
+ mdelay(10);
+ vga_out8(0x3d4, 0x67, par);
+ /* end of part */
+ vga_out8(0x3d5, reg->CR67 & ~0x0c, par);
+
+ /* other mode timing and extended regs */
+ vga_out8(0x3d4, 0x34, par);
+ vga_out8(0x3d5, reg->CR34, par);
+ vga_out8(0x3d4, 0x40, par);
+ vga_out8(0x3d5, reg->CR40, par);
+ vga_out8(0x3d4, 0x42, par);
+ vga_out8(0x3d5, reg->CR42, par);
+ vga_out8(0x3d4, 0x45, par);
+ vga_out8(0x3d5, reg->CR45, par);
+ vga_out8(0x3d4, 0x50, par);
+ vga_out8(0x3d5, reg->CR50, par);
+ vga_out8(0x3d4, 0x51, par);
+ vga_out8(0x3d5, reg->CR51, par);
+
+ /* memory timings */
+ vga_out8(0x3d4, 0x36, par);
+ vga_out8(0x3d5, reg->CR36, par);
+ vga_out8(0x3d4, 0x60, par);
+ vga_out8(0x3d5, reg->CR60, par);
+ vga_out8(0x3d4, 0x68, par);
+ vga_out8(0x3d5, reg->CR68, par);
+ vga_out8(0x3d4, 0x69, par);
+ vga_out8(0x3d5, reg->CR69, par);
+ vga_out8(0x3d4, 0x6f, par);
+ vga_out8(0x3d5, reg->CR6F, par);
+
+ vga_out8(0x3d4, 0x33, par);
+ vga_out8(0x3d5, reg->CR33, par);
+ vga_out8(0x3d4, 0x86, par);
+ vga_out8(0x3d5, reg->CR86, par);
+ vga_out8(0x3d4, 0x88, par);
+ vga_out8(0x3d5, reg->CR88, par);
+ vga_out8(0x3d4, 0x90, par);
+ vga_out8(0x3d5, reg->CR90, par);
+ vga_out8(0x3d4, 0x91, par);
+ vga_out8(0x3d5, reg->CR91, par);
+
+ if (par->chip == S3_SAVAGE4) {
+ vga_out8(0x3d4, 0xb0, par);
+ vga_out8(0x3d5, reg->CRB0, par);
+ }
+
+ vga_out8(0x3d4, 0x32, par);
+ vga_out8(0x3d5, reg->CR32, par);
+
+ /* unlock extended seq regs */
+ vga_out8(0x3c4, 0x08, par);
+ vga_out8(0x3c5, 0x06, par);
+
+ /* Restore extended sequencer regs for MCLK. SR10 == 255 indicates
+ * that we should leave the default SR10 and SR11 values there.
+ */
+ if (reg->SR10 != 255) {
+ vga_out8(0x3c4, 0x10, par);
+ vga_out8(0x3c5, reg->SR10, par);
+ vga_out8(0x3c4, 0x11, par);
+ vga_out8(0x3c5, reg->SR11, par);
+ }
+
+ /* restore extended seq regs for dclk */
+ vga_out8(0x3c4, 0x0e, par);
+ vga_out8(0x3c5, reg->SR0E, par);
+ vga_out8(0x3c4, 0x0f, par);
+ vga_out8(0x3c5, reg->SR0F, par);
+ vga_out8(0x3c4, 0x12, par);
+ vga_out8(0x3c5, reg->SR12, par);
+ vga_out8(0x3c4, 0x13, par);
+ vga_out8(0x3c5, reg->SR13, par);
+ vga_out8(0x3c4, 0x29, par);
+ vga_out8(0x3c5, reg->SR29, par);
+ vga_out8(0x3c4, 0x18, par);
+ vga_out8(0x3c5, reg->SR18, par);
+
+ /* load new m, n pll values for dclk & mclk */
+ vga_out8(0x3c4, 0x15, par);
+ tmp = vga_in8(0x3c5, par) & ~0x21;
+
+ vga_out8(0x3c5, tmp | 0x03, par);
+ vga_out8(0x3c5, tmp | 0x23, par);
+ vga_out8(0x3c5, tmp | 0x03, par);
+ vga_out8(0x3c5, reg->SR15, par);
+ udelay(100);
+
+ vga_out8(0x3c4, 0x30, par);
+ vga_out8(0x3c5, reg->SR30, par);
+ vga_out8(0x3c4, 0x08, par);
+ vga_out8(0x3c5, reg->SR08, par);
+
+ /* now write out cr67 in full, possibly starting STREAMS */
+ VerticalRetraceWait(par);
+ vga_out8(0x3d4, 0x67, par);
+ vga_out8(0x3d5, reg->CR67, par);
+
+ vga_out8(0x3d4, 0x66, par);
+ cr66 = vga_in8(0x3d5, par);
+ vga_out8(0x3d5, cr66 | 0x80, par);
+ vga_out8(0x3d4, 0x3a, par);
+ cr3a = vga_in8(0x3d5, par);
+ vga_out8(0x3d5, cr3a | 0x80, par);
+
+ if (par->chip != S3_SAVAGE_MX) {
+ VerticalRetraceWait(par);
+ savage_out32(FIFO_CONTROL_REG, reg->MMPR0, par);
+ par->SavageWaitIdle(par);
+ savage_out32(MIU_CONTROL_REG, reg->MMPR1, par);
+ par->SavageWaitIdle(par);
+ savage_out32(STREAMS_TIMEOUT_REG, reg->MMPR2, par);
+ par->SavageWaitIdle(par);
+ savage_out32(MISC_TIMEOUT_REG, reg->MMPR3, par);
+ }
+
+ vga_out8(0x3d4, 0x66, par);
+ vga_out8(0x3d5, cr66, par);
+ vga_out8(0x3d4, 0x3a, par);
+ vga_out8(0x3d5, cr3a, par);
+
+ SavageSetup2DEngine(par);
+ vgaHWProtect(par, 0);
+}
+
+static void savagefb_update_start(struct savagefb_par *par, int base)
+{
+ /* program the start address registers */
+ vga_out16(0x3d4, (base & 0x00ff00) | 0x0c, par);
+ vga_out16(0x3d4, ((base & 0x00ff) << 8) | 0x0d, par);
+ vga_out8(0x3d4, 0x69, par);
+ vga_out8(0x3d5, (base & 0x7f0000) >> 16, par);
+}
+
+
+static void savagefb_set_fix(struct fb_info *info)
+{
+ info->fix.line_length = info->var.xres_virtual *
+ info->var.bits_per_pixel / 8;
+
+ if (info->var.bits_per_pixel == 8) {
+ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ info->fix.xpanstep = 4;
+ } else {
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
+ info->fix.xpanstep = 2;
+ }
+
+}
+
+static int savagefb_set_par(struct fb_info *info)
+{
+ struct savagefb_par *par = info->par;
+ struct fb_var_screeninfo *var = &info->var;
+ int err;
+
+ DBG("savagefb_set_par");
+ err = savagefb_decode_var(var, par, &par->state);
+ if (err)
+ return err;
+
+ if (par->dacSpeedBpp <= 0) {
+ if (var->bits_per_pixel > 24)
+ par->dacSpeedBpp = par->clock[3];
+ else if (var->bits_per_pixel >= 24)
+ par->dacSpeedBpp = par->clock[2];
+ else if ((var->bits_per_pixel > 8) && (var->bits_per_pixel < 24))
+ par->dacSpeedBpp = par->clock[1];
+ else if (var->bits_per_pixel <= 8)
+ par->dacSpeedBpp = par->clock[0];
+ }
+
+ /* Set ramdac limits */
+ par->maxClock = par->dacSpeedBpp;
+ par->minClock = 10000;
+
+ savagefb_set_par_int(par, &par->state);
+ fb_set_cmap(&info->cmap, info);
+ savagefb_set_fix(info);
+ savagefb_set_clip(info);
+
+ SavagePrintRegs(par);
+ return 0;
+}
+
+/*
+ * Pan or Wrap the Display
+ */
+static int savagefb_pan_display(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ struct savagefb_par *par = info->par;
+ int base;
+
+ base = (var->yoffset * info->fix.line_length
+ + (var->xoffset & ~1) * ((info->var.bits_per_pixel+7) / 8)) >> 2;
+
+ savagefb_update_start(par, base);
+ return 0;
+}
+
+static int savagefb_blank(int blank, struct fb_info *info)
+{
+ struct savagefb_par *par = info->par;
+ u8 sr8 = 0, srd = 0;
+
+ if (par->display_type == DISP_CRT) {
+ vga_out8(0x3c4, 0x08, par);
+ sr8 = vga_in8(0x3c5, par);
+ sr8 |= 0x06;
+ vga_out8(0x3c5, sr8, par);
+ vga_out8(0x3c4, 0x0d, par);
+ srd = vga_in8(0x3c5, par);
+ srd &= 0x50;
+
+ switch (blank) {
+ case FB_BLANK_UNBLANK:
+ case FB_BLANK_NORMAL:
+ break;
+ case FB_BLANK_VSYNC_SUSPEND:
+ srd |= 0x10;
+ break;
+ case FB_BLANK_HSYNC_SUSPEND:
+ srd |= 0x40;
+ break;
+ case FB_BLANK_POWERDOWN:
+ srd |= 0x50;
+ break;
+ }
+
+ vga_out8(0x3c4, 0x0d, par);
+ vga_out8(0x3c5, srd, par);
+ }
+
+ if (par->display_type == DISP_LCD ||
+ par->display_type == DISP_DFP) {
+ switch(blank) {
+ case FB_BLANK_UNBLANK:
+ case FB_BLANK_NORMAL:
+ vga_out8(0x3c4, 0x31, par); /* SR31 bit 4 - FP enable */
+ vga_out8(0x3c5, vga_in8(0x3c5, par) | 0x10, par);
+ break;
+ case FB_BLANK_VSYNC_SUSPEND:
+ case FB_BLANK_HSYNC_SUSPEND:
+ case FB_BLANK_POWERDOWN:
+ vga_out8(0x3c4, 0x31, par); /* SR31 bit 4 - FP enable */
+ vga_out8(0x3c5, vga_in8(0x3c5, par) & ~0x10, par);
+ break;
+ }
+ }
+
+ return (blank == FB_BLANK_NORMAL) ? 1 : 0;
+}
+
+static int savagefb_open(struct fb_info *info, int user)
+{
+ struct savagefb_par *par = info->par;
+
+ mutex_lock(&par->open_lock);
+
+ if (!par->open_count) {
+ memset(&par->vgastate, 0, sizeof(par->vgastate));
+ par->vgastate.flags = VGA_SAVE_CMAP | VGA_SAVE_FONTS |
+ VGA_SAVE_MODE;
+ par->vgastate.vgabase = par->mmio.vbase + 0x8000;
+ save_vga(&par->vgastate);
+ savage_get_default_par(par, &par->initial);
+ }
+
+ par->open_count++;
+ mutex_unlock(&par->open_lock);
+ return 0;
+}
+
+static int savagefb_release(struct fb_info *info, int user)
+{
+ struct savagefb_par *par = info->par;
+
+ mutex_lock(&par->open_lock);
+
+ if (par->open_count == 1) {
+ savage_set_default_par(par, &par->initial);
+ restore_vga(&par->vgastate);
+ }
+
+ par->open_count--;
+ mutex_unlock(&par->open_lock);
+ return 0;
+}
+
+static const struct fb_ops savagefb_ops = {
+ .owner = THIS_MODULE,
+ .fb_open = savagefb_open,
+ .fb_release = savagefb_release,
+ .fb_check_var = savagefb_check_var,
+ .fb_set_par = savagefb_set_par,
+ .fb_setcolreg = savagefb_setcolreg,
+ .fb_pan_display = savagefb_pan_display,
+ .fb_blank = savagefb_blank,
+#if defined(CONFIG_FB_SAVAGE_ACCEL)
+ .fb_fillrect = savagefb_fillrect,
+ .fb_copyarea = savagefb_copyarea,
+ .fb_imageblit = savagefb_imageblit,
+ .fb_sync = savagefb_sync,
+#else
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+#endif
+};
+
+/* --------------------------------------------------------------------- */
+
+static const struct fb_var_screeninfo savagefb_var800x600x8 = {
+ .accel_flags = FB_ACCELF_TEXT,
+ .xres = 800,
+ .yres = 600,
+ .xres_virtual = 800,
+ .yres_virtual = 600,
+ .bits_per_pixel = 8,
+ .pixclock = 25000,
+ .left_margin = 88,
+ .right_margin = 40,
+ .upper_margin = 23,
+ .lower_margin = 1,
+ .hsync_len = 128,
+ .vsync_len = 4,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED
+};
+
+static void savage_enable_mmio(struct savagefb_par *par)
+{
+ unsigned char val;
+
+ DBG("savage_enable_mmio\n");
+
+ val = vga_in8(0x3c3, par);
+ vga_out8(0x3c3, val | 0x01, par);
+ val = vga_in8(0x3cc, par);
+ vga_out8(0x3c2, val | 0x01, par);
+
+ if (par->chip >= S3_SAVAGE4) {
+ vga_out8(0x3d4, 0x40, par);
+ val = vga_in8(0x3d5, par);
+ vga_out8(0x3d5, val | 1, par);
+ }
+}
+
+
+static void savage_disable_mmio(struct savagefb_par *par)
+{
+ unsigned char val;
+
+ DBG("savage_disable_mmio\n");
+
+ if (par->chip >= S3_SAVAGE4) {
+ vga_out8(0x3d4, 0x40, par);
+ val = vga_in8(0x3d5, par);
+ vga_out8(0x3d5, val | 1, par);
+ }
+}
+
+
+static int savage_map_mmio(struct fb_info *info)
+{
+ struct savagefb_par *par = info->par;
+ DBG("savage_map_mmio");
+
+ if (S3_SAVAGE3D_SERIES(par->chip))
+ par->mmio.pbase = pci_resource_start(par->pcidev, 0) +
+ SAVAGE_NEWMMIO_REGBASE_S3;
+ else
+ par->mmio.pbase = pci_resource_start(par->pcidev, 0) +
+ SAVAGE_NEWMMIO_REGBASE_S4;
+
+ par->mmio.len = SAVAGE_NEWMMIO_REGSIZE;
+
+ par->mmio.vbase = ioremap(par->mmio.pbase, par->mmio.len);
+ if (!par->mmio.vbase) {
+ printk("savagefb: unable to map memory mapped IO\n");
+ return -ENOMEM;
+ } else
+ printk(KERN_INFO "savagefb: mapped io at %p\n",
+ par->mmio.vbase);
+
+ info->fix.mmio_start = par->mmio.pbase;
+ info->fix.mmio_len = par->mmio.len;
+
+ par->bci_base = (u32 __iomem *)(par->mmio.vbase + BCI_BUFFER_OFFSET);
+ par->bci_ptr = 0;
+
+ savage_enable_mmio(par);
+
+ return 0;
+}
+
+static void savage_unmap_mmio(struct fb_info *info)
+{
+ struct savagefb_par *par = info->par;
+ DBG("savage_unmap_mmio");
+
+ savage_disable_mmio(par);
+
+ if (par->mmio.vbase) {
+ iounmap(par->mmio.vbase);
+ par->mmio.vbase = NULL;
+ }
+}
+
+static int savage_map_video(struct fb_info *info, int video_len)
+{
+ struct savagefb_par *par = info->par;
+ int resource;
+
+ DBG("savage_map_video");
+
+ if (S3_SAVAGE3D_SERIES(par->chip))
+ resource = 0;
+ else
+ resource = 1;
+
+ par->video.pbase = pci_resource_start(par->pcidev, resource);
+ par->video.len = video_len;
+ par->video.vbase = ioremap_wc(par->video.pbase, par->video.len);
+
+ if (!par->video.vbase) {
+ printk("savagefb: unable to map screen memory\n");
+ return -ENOMEM;
+ } else
+ printk(KERN_INFO "savagefb: mapped framebuffer at %p, "
+ "pbase == %x\n", par->video.vbase, par->video.pbase);
+
+ info->fix.smem_start = par->video.pbase;
+ info->fix.smem_len = par->video.len - par->cob_size;
+ info->screen_base = par->video.vbase;
+ par->video.wc_cookie = arch_phys_wc_add(par->video.pbase, video_len);
+
+ /* Clear framebuffer, it's all white in memory after boot */
+ memset_io(par->video.vbase, 0, par->video.len);
+
+ return 0;
+}
+
+static void savage_unmap_video(struct fb_info *info)
+{
+ struct savagefb_par *par = info->par;
+
+ DBG("savage_unmap_video");
+
+ if (par->video.vbase) {
+ arch_phys_wc_del(par->video.wc_cookie);
+ iounmap(par->video.vbase);
+ par->video.vbase = NULL;
+ info->screen_base = NULL;
+ }
+}
+
+static int savage_init_hw(struct savagefb_par *par)
+{
+ unsigned char config1, m, n, n1, n2, sr8, cr3f, cr66 = 0, tmp;
+
+ static unsigned char RamSavage3D[] = { 8, 4, 4, 2 };
+ static unsigned char RamSavage4[] = { 2, 4, 8, 12, 16, 32, 64, 32 };
+ static unsigned char RamSavageMX[] = { 2, 8, 4, 16, 8, 16, 4, 16 };
+ static unsigned char RamSavageNB[] = { 0, 2, 4, 8, 16, 32, 2, 2 };
+ int videoRam, videoRambytes, dvi;
+
+ DBG("savage_init_hw");
+
+ /* unprotect CRTC[0-7] */
+ vga_out8(0x3d4, 0x11, par);
+ tmp = vga_in8(0x3d5, par);
+ vga_out8(0x3d5, tmp & 0x7f, par);
+
+ /* unlock extended regs */
+ vga_out16(0x3d4, 0x4838, par);
+ vga_out16(0x3d4, 0xa039, par);
+ vga_out16(0x3c4, 0x0608, par);
+
+ vga_out8(0x3d4, 0x40, par);
+ tmp = vga_in8(0x3d5, par);
+ vga_out8(0x3d5, tmp & ~0x01, par);
+
+ /* unlock sys regs */
+ vga_out8(0x3d4, 0x38, par);
+ vga_out8(0x3d5, 0x48, par);
+
+ /* Unlock system registers. */
+ vga_out16(0x3d4, 0x4838, par);
+
+ /* Next go on to detect amount of installed ram */
+
+ vga_out8(0x3d4, 0x36, par); /* for register CR36 (CONFG_REG1), */
+ config1 = vga_in8(0x3d5, par); /* get amount of vram installed */
+
+ /* Compute the amount of video memory and offscreen memory. */
+
+ switch (par->chip) {
+ case S3_SAVAGE3D:
+ videoRam = RamSavage3D[(config1 & 0xC0) >> 6 ] * 1024;
+ break;
+
+ case S3_SAVAGE4:
+ /*
+ * The Savage4 has one ugly special case to consider. On
+ * systems with 4 banks of 2Mx32 SDRAM, the BIOS says 4MB
+ * when it really means 8MB. Why do it the same when you
+ * can do it different...
+ */
+ vga_out8(0x3d4, 0x68, par); /* memory control 1 */
+ if ((vga_in8(0x3d5, par) & 0xC0) == (0x01 << 6))
+ RamSavage4[1] = 8;
+ fallthrough;
+
+ case S3_SAVAGE2000:
+ videoRam = RamSavage4[(config1 & 0xE0) >> 5] * 1024;
+ break;
+
+ case S3_SAVAGE_MX:
+ case S3_SUPERSAVAGE:
+ videoRam = RamSavageMX[(config1 & 0x0E) >> 1] * 1024;
+ break;
+
+ case S3_PROSAVAGE:
+ case S3_PROSAVAGEDDR:
+ case S3_TWISTER:
+ videoRam = RamSavageNB[(config1 & 0xE0) >> 5] * 1024;
+ break;
+
+ default:
+ /* How did we get here? */
+ videoRam = 0;
+ break;
+ }
+
+ videoRambytes = videoRam * 1024;
+
+ printk(KERN_INFO "savagefb: probed videoram: %dk\n", videoRam);
+
+ /* reset graphics engine to avoid memory corruption */
+ vga_out8(0x3d4, 0x66, par);
+ cr66 = vga_in8(0x3d5, par);
+ vga_out8(0x3d5, cr66 | 0x02, par);
+ usleep_range(10000, 11000);
+
+ vga_out8(0x3d4, 0x66, par);
+ vga_out8(0x3d5, cr66 & ~0x02, par); /* clear reset flag */
+ usleep_range(10000, 11000);
+
+
+ /*
+ * reset memory interface, 3D engine, AGP master, PCI master,
+ * master engine unit, motion compensation/LPB
+ */
+ vga_out8(0x3d4, 0x3f, par);
+ cr3f = vga_in8(0x3d5, par);
+ vga_out8(0x3d5, cr3f | 0x08, par);
+ usleep_range(10000, 11000);
+
+ vga_out8(0x3d4, 0x3f, par);
+ vga_out8(0x3d5, cr3f & ~0x08, par); /* clear reset flags */
+ usleep_range(10000, 11000);
+
+ /* Savage ramdac speeds */
+ par->numClocks = 4;
+ par->clock[0] = 250000;
+ par->clock[1] = 250000;
+ par->clock[2] = 220000;
+ par->clock[3] = 220000;
+
+ /* detect current mclk */
+ vga_out8(0x3c4, 0x08, par);
+ sr8 = vga_in8(0x3c5, par);
+ vga_out8(0x3c5, 0x06, par);
+ vga_out8(0x3c4, 0x10, par);
+ n = vga_in8(0x3c5, par);
+ vga_out8(0x3c4, 0x11, par);
+ m = vga_in8(0x3c5, par);
+ vga_out8(0x3c4, 0x08, par);
+ vga_out8(0x3c5, sr8, par);
+ m &= 0x7f;
+ n1 = n & 0x1f;
+ n2 = (n >> 5) & 0x03;
+ par->MCLK = ((1431818 * (m+2)) / (n1+2) / (1 << n2) + 50) / 100;
+ printk(KERN_INFO "savagefb: Detected current MCLK value of %d kHz\n",
+ par->MCLK);
+
+ /* check for DVI/flat panel */
+ dvi = 0;
+
+ if (par->chip == S3_SAVAGE4) {
+ unsigned char sr30 = 0x00;
+
+ vga_out8(0x3c4, 0x30, par);
+ /* clear bit 1 */
+ vga_out8(0x3c5, vga_in8(0x3c5, par) & ~0x02, par);
+ sr30 = vga_in8(0x3c5, par);
+ if (sr30 & 0x02 /*0x04 */) {
+ dvi = 1;
+ printk("savagefb: Digital Flat Panel Detected\n");
+ }
+ }
+
+ if ((S3_SAVAGE_MOBILE_SERIES(par->chip) ||
+ S3_MOBILE_TWISTER_SERIES(par->chip)) && !par->crtonly)
+ par->display_type = DISP_LCD;
+ else if (dvi || (par->chip == S3_SAVAGE4 && par->dvi))
+ par->display_type = DISP_DFP;
+ else
+ par->display_type = DISP_CRT;
+
+ /* Check LCD panel parrmation */
+
+ if (par->display_type == DISP_LCD) {
+ unsigned char cr6b = VGArCR(0x6b, par);
+
+ int panelX = (VGArSEQ(0x61, par) +
+ ((VGArSEQ(0x66, par) & 0x02) << 7) + 1) * 8;
+ int panelY = (VGArSEQ(0x69, par) +
+ ((VGArSEQ(0x6e, par) & 0x70) << 4) + 1);
+
+ char * sTechnology = "Unknown";
+
+ /* OK, I admit it. I don't know how to limit the max dot clock
+ * for LCD panels of various sizes. I thought I copied the
+ * formula from the BIOS, but many users have parrmed me of
+ * my folly.
+ *
+ * Instead, I'll abandon any attempt to automatically limit the
+ * clock, and add an LCDClock option to XF86Config. Some day,
+ * I should come back to this.
+ */
+
+ enum ACTIVE_DISPLAYS { /* These are the bits in CR6B */
+ ActiveCRT = 0x01,
+ ActiveLCD = 0x02,
+ ActiveTV = 0x04,
+ ActiveCRT2 = 0x20,
+ ActiveDUO = 0x80
+ };
+
+ if ((VGArSEQ(0x39, par) & 0x03) == 0) {
+ sTechnology = "TFT";
+ } else if ((VGArSEQ(0x30, par) & 0x01) == 0) {
+ sTechnology = "DSTN";
+ } else {
+ sTechnology = "STN";
+ }
+
+ printk(KERN_INFO "savagefb: %dx%d %s LCD panel detected %s\n",
+ panelX, panelY, sTechnology,
+ cr6b & ActiveLCD ? "and active" : "but not active");
+
+ if (cr6b & ActiveLCD) {
+ /*
+ * If the LCD is active and panel expansion is enabled,
+ * we probably want to kill the HW cursor.
+ */
+
+ printk(KERN_INFO "savagefb: Limiting video mode to "
+ "%dx%d\n", panelX, panelY);
+
+ par->SavagePanelWidth = panelX;
+ par->SavagePanelHeight = panelY;
+
+ } else
+ par->display_type = DISP_CRT;
+ }
+
+ savage_get_default_par(par, &par->state);
+ par->save = par->state;
+
+ if (S3_SAVAGE4_SERIES(par->chip)) {
+ /*
+ * The Savage4 and ProSavage have COB coherency bugs which
+ * render the buffer useless. We disable it.
+ */
+ par->cob_index = 2;
+ par->cob_size = 0x8000 << par->cob_index;
+ par->cob_offset = videoRambytes;
+ } else {
+ /* We use 128kB for the COB on all chips. */
+
+ par->cob_index = 7;
+ par->cob_size = 0x400 << par->cob_index;
+ par->cob_offset = videoRambytes - par->cob_size;
+ }
+
+ return videoRambytes;
+}
+
+static int savage_init_fb_info(struct fb_info *info, struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ struct savagefb_par *par = info->par;
+ int err = 0;
+
+ par->pcidev = dev;
+
+ info->fix.type = FB_TYPE_PACKED_PIXELS;
+ info->fix.type_aux = 0;
+ info->fix.ypanstep = 1;
+ info->fix.ywrapstep = 0;
+ info->fix.accel = id->driver_data;
+
+ switch (info->fix.accel) {
+ case FB_ACCEL_SUPERSAVAGE:
+ par->chip = S3_SUPERSAVAGE;
+ snprintf(info->fix.id, 16, "SuperSavage");
+ break;
+ case FB_ACCEL_SAVAGE4:
+ par->chip = S3_SAVAGE4;
+ snprintf(info->fix.id, 16, "Savage4");
+ break;
+ case FB_ACCEL_SAVAGE3D:
+ par->chip = S3_SAVAGE3D;
+ snprintf(info->fix.id, 16, "Savage3D");
+ break;
+ case FB_ACCEL_SAVAGE3D_MV:
+ par->chip = S3_SAVAGE3D;
+ snprintf(info->fix.id, 16, "Savage3D-MV");
+ break;
+ case FB_ACCEL_SAVAGE2000:
+ par->chip = S3_SAVAGE2000;
+ snprintf(info->fix.id, 16, "Savage2000");
+ break;
+ case FB_ACCEL_SAVAGE_MX_MV:
+ par->chip = S3_SAVAGE_MX;
+ snprintf(info->fix.id, 16, "Savage/MX-MV");
+ break;
+ case FB_ACCEL_SAVAGE_MX:
+ par->chip = S3_SAVAGE_MX;
+ snprintf(info->fix.id, 16, "Savage/MX");
+ break;
+ case FB_ACCEL_SAVAGE_IX_MV:
+ par->chip = S3_SAVAGE_MX;
+ snprintf(info->fix.id, 16, "Savage/IX-MV");
+ break;
+ case FB_ACCEL_SAVAGE_IX:
+ par->chip = S3_SAVAGE_MX;
+ snprintf(info->fix.id, 16, "Savage/IX");
+ break;
+ case FB_ACCEL_PROSAVAGE_PM:
+ par->chip = S3_PROSAVAGE;
+ snprintf(info->fix.id, 16, "ProSavagePM");
+ break;
+ case FB_ACCEL_PROSAVAGE_KM:
+ par->chip = S3_PROSAVAGE;
+ snprintf(info->fix.id, 16, "ProSavageKM");
+ break;
+ case FB_ACCEL_S3TWISTER_P:
+ par->chip = S3_TWISTER;
+ snprintf(info->fix.id, 16, "TwisterP");
+ break;
+ case FB_ACCEL_S3TWISTER_K:
+ par->chip = S3_TWISTER;
+ snprintf(info->fix.id, 16, "TwisterK");
+ break;
+ case FB_ACCEL_PROSAVAGE_DDR:
+ par->chip = S3_PROSAVAGEDDR;
+ snprintf(info->fix.id, 16, "ProSavageDDR");
+ break;
+ case FB_ACCEL_PROSAVAGE_DDRK:
+ par->chip = S3_PROSAVAGEDDR;
+ snprintf(info->fix.id, 16, "ProSavage8");
+ break;
+ }
+
+ if (S3_SAVAGE3D_SERIES(par->chip)) {
+ par->SavageWaitIdle = savage3D_waitidle;
+ par->SavageWaitFifo = savage3D_waitfifo;
+ } else if (S3_SAVAGE4_SERIES(par->chip) ||
+ S3_SUPERSAVAGE == par->chip) {
+ par->SavageWaitIdle = savage4_waitidle;
+ par->SavageWaitFifo = savage4_waitfifo;
+ } else {
+ par->SavageWaitIdle = savage2000_waitidle;
+ par->SavageWaitFifo = savage2000_waitfifo;
+ }
+
+ info->var.nonstd = 0;
+ info->var.activate = FB_ACTIVATE_NOW;
+ info->var.width = -1;
+ info->var.height = -1;
+ info->var.accel_flags = 0;
+
+ info->fbops = &savagefb_ops;
+ info->flags = FBINFO_HWACCEL_YPAN |
+ FBINFO_HWACCEL_XPAN;
+
+ info->pseudo_palette = par->pseudo_palette;
+
+#if defined(CONFIG_FB_SAVAGE_ACCEL)
+ /* FIFO size + padding for commands */
+ info->pixmap.addr = kcalloc(8, 1024, GFP_KERNEL);
+
+ err = -ENOMEM;
+ if (info->pixmap.addr) {
+ info->pixmap.size = 8*1024;
+ info->pixmap.scan_align = 4;
+ info->pixmap.buf_align = 4;
+ info->pixmap.access_align = 32;
+
+ err = fb_alloc_cmap(&info->cmap, NR_PALETTE, 0);
+ if (!err)
+ info->flags |= FBINFO_HWACCEL_COPYAREA |
+ FBINFO_HWACCEL_FILLRECT |
+ FBINFO_HWACCEL_IMAGEBLIT;
+ else
+ kfree(info->pixmap.addr);
+ }
+#endif
+ return err;
+}
+
+/* --------------------------------------------------------------------- */
+
+static int savagefb_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ struct fb_info *info;
+ struct savagefb_par *par;
+ u_int h_sync, v_sync;
+ unsigned char __maybe_unused *edid;
+ int err, lpitch;
+ int video_len;
+
+ DBG("savagefb_probe");
+
+ err = aperture_remove_conflicting_pci_devices(dev, "savagefb");
+ if (err)
+ return err;
+
+ info = framebuffer_alloc(sizeof(struct savagefb_par), &dev->dev);
+ if (!info)
+ return -ENOMEM;
+ par = info->par;
+ mutex_init(&par->open_lock);
+ err = pci_enable_device(dev);
+ if (err)
+ goto failed_enable;
+
+ if ((err = pci_request_regions(dev, "savagefb"))) {
+ printk(KERN_ERR "cannot request PCI regions\n");
+ goto failed_enable;
+ }
+
+ err = -ENOMEM;
+
+ if ((err = savage_init_fb_info(info, dev, id)))
+ goto failed_init;
+
+ err = savage_map_mmio(info);
+ if (err)
+ goto failed_mmio;
+
+ video_len = savage_init_hw(par);
+ /* FIXME: can't be negative */
+ if (video_len < 0) {
+ err = video_len;
+ goto failed_mmio;
+ }
+
+ err = savage_map_video(info, video_len);
+ if (err)
+ goto failed_video;
+
+ INIT_LIST_HEAD(&info->modelist);
+#if defined(CONFIG_FB_SAVAGE_I2C)
+ savagefb_create_i2c_busses(info);
+ savagefb_probe_i2c_connector(info, &edid);
+ fb_edid_to_monspecs(edid, &info->monspecs);
+ kfree(edid);
+ fb_videomode_to_modelist(info->monspecs.modedb,
+ info->monspecs.modedb_len,
+ &info->modelist);
+#endif
+ info->var = savagefb_var800x600x8;
+ /* if a panel was detected, default to a CVT mode instead */
+ if (par->SavagePanelWidth) {
+ struct fb_videomode cvt_mode;
+
+ memset(&cvt_mode, 0, sizeof(cvt_mode));
+ cvt_mode.xres = par->SavagePanelWidth;
+ cvt_mode.yres = par->SavagePanelHeight;
+ cvt_mode.refresh = 60;
+ /* FIXME: if we know there is only the panel
+ * we can enable reduced blanking as well */
+ if (fb_find_mode_cvt(&cvt_mode, 0, 0))
+ printk(KERN_WARNING "No CVT mode found for panel\n");
+ else if (fb_find_mode(&info->var, info, NULL, NULL, 0,
+ &cvt_mode, 0) != 3)
+ info->var = savagefb_var800x600x8;
+ }
+
+ if (mode_option) {
+ fb_find_mode(&info->var, info, mode_option,
+ info->monspecs.modedb, info->monspecs.modedb_len,
+ NULL, 8);
+ } else if (info->monspecs.modedb != NULL) {
+ const struct fb_videomode *mode;
+
+ mode = fb_find_best_display(&info->monspecs, &info->modelist);
+ savage_update_var(&info->var, mode);
+ }
+
+ /* maximize virtual vertical length */
+ lpitch = info->var.xres_virtual*((info->var.bits_per_pixel + 7) >> 3);
+ info->var.yres_virtual = info->fix.smem_len/lpitch;
+
+ if (info->var.yres_virtual < info->var.yres) {
+ err = -ENOMEM;
+ goto failed;
+ }
+
+#if defined(CONFIG_FB_SAVAGE_ACCEL)
+ /*
+ * The clipping coordinates are masked with 0xFFF, so limit our
+ * virtual resolutions to these sizes.
+ */
+ if (info->var.yres_virtual > 0x1000)
+ info->var.yres_virtual = 0x1000;
+
+ if (info->var.xres_virtual > 0x1000)
+ info->var.xres_virtual = 0x1000;
+#endif
+ savagefb_check_var(&info->var, info);
+ savagefb_set_fix(info);
+
+ /*
+ * Calculate the hsync and vsync frequencies. Note that
+ * we split the 1e12 constant up so that we can preserve
+ * the precision and fit the results into 32-bit registers.
+ * (1953125000 * 512 = 1e12)
+ */
+ h_sync = 1953125000 / info->var.pixclock;
+ h_sync = h_sync * 512 / (info->var.xres + info->var.left_margin +
+ info->var.right_margin +
+ info->var.hsync_len);
+ v_sync = h_sync / (info->var.yres + info->var.upper_margin +
+ info->var.lower_margin + info->var.vsync_len);
+
+ printk(KERN_INFO "savagefb v" SAVAGEFB_VERSION ": "
+ "%dkB VRAM, using %dx%d, %d.%03dkHz, %dHz\n",
+ info->fix.smem_len >> 10,
+ info->var.xres, info->var.yres,
+ h_sync / 1000, h_sync % 1000, v_sync);
+
+
+ fb_destroy_modedb(info->monspecs.modedb);
+ info->monspecs.modedb = NULL;
+
+ err = register_framebuffer(info);
+ if (err < 0)
+ goto failed;
+
+ printk(KERN_INFO "fb: S3 %s frame buffer device\n",
+ info->fix.id);
+
+ /*
+ * Our driver data
+ */
+ pci_set_drvdata(dev, info);
+
+ return 0;
+
+ failed:
+#ifdef CONFIG_FB_SAVAGE_I2C
+ savagefb_delete_i2c_busses(info);
+#endif
+ fb_alloc_cmap(&info->cmap, 0, 0);
+ savage_unmap_video(info);
+ failed_video:
+ savage_unmap_mmio(info);
+ failed_mmio:
+ kfree(info->pixmap.addr);
+ failed_init:
+ pci_release_regions(dev);
+ failed_enable:
+ framebuffer_release(info);
+
+ return err;
+}
+
+static void savagefb_remove(struct pci_dev *dev)
+{
+ struct fb_info *info = pci_get_drvdata(dev);
+
+ DBG("savagefb_remove");
+
+ if (info) {
+ unregister_framebuffer(info);
+
+#ifdef CONFIG_FB_SAVAGE_I2C
+ savagefb_delete_i2c_busses(info);
+#endif
+ fb_alloc_cmap(&info->cmap, 0, 0);
+ savage_unmap_video(info);
+ savage_unmap_mmio(info);
+ kfree(info->pixmap.addr);
+ pci_release_regions(dev);
+ framebuffer_release(info);
+ }
+}
+
+static int savagefb_suspend_late(struct device *dev, pm_message_t mesg)
+{
+ struct fb_info *info = dev_get_drvdata(dev);
+ struct savagefb_par *par = info->par;
+
+ DBG("savagefb_suspend");
+
+ if (mesg.event == PM_EVENT_PRETHAW)
+ mesg.event = PM_EVENT_FREEZE;
+ par->pm_state = mesg.event;
+ dev->power.power_state = mesg;
+
+ /*
+ * For PM_EVENT_FREEZE, do not power down so the console
+ * can remain active.
+ */
+ if (mesg.event == PM_EVENT_FREEZE)
+ return 0;
+
+ console_lock();
+ fb_set_suspend(info, 1);
+
+ if (info->fbops->fb_sync)
+ info->fbops->fb_sync(info);
+
+ savagefb_blank(FB_BLANK_POWERDOWN, info);
+ savage_set_default_par(par, &par->save);
+ savage_disable_mmio(par);
+ console_unlock();
+
+ return 0;
+}
+
+static int __maybe_unused savagefb_suspend(struct device *dev)
+{
+ return savagefb_suspend_late(dev, PMSG_SUSPEND);
+}
+
+static int __maybe_unused savagefb_hibernate(struct device *dev)
+{
+ return savagefb_suspend_late(dev, PMSG_HIBERNATE);
+}
+
+static int __maybe_unused savagefb_freeze(struct device *dev)
+{
+ return savagefb_suspend_late(dev, PMSG_FREEZE);
+}
+
+static int __maybe_unused savagefb_resume(struct device *dev)
+{
+ struct fb_info *info = dev_get_drvdata(dev);
+ struct savagefb_par *par = info->par;
+ int cur_state = par->pm_state;
+
+ DBG("savage_resume");
+
+ par->pm_state = PM_EVENT_ON;
+
+ /*
+ * The adapter was not powered down coming back from a
+ * PM_EVENT_FREEZE.
+ */
+ if (cur_state == PM_EVENT_FREEZE)
+ return 0;
+
+ console_lock();
+
+ savage_enable_mmio(par);
+ savage_init_hw(par);
+ savagefb_set_par(info);
+ fb_set_suspend(info, 0);
+ savagefb_blank(FB_BLANK_UNBLANK, info);
+ console_unlock();
+
+ return 0;
+}
+
+static const struct dev_pm_ops savagefb_pm_ops = {
+#ifdef CONFIG_PM_SLEEP
+ .suspend = savagefb_suspend,
+ .resume = savagefb_resume,
+ .freeze = savagefb_freeze,
+ .thaw = savagefb_resume,
+ .poweroff = savagefb_hibernate,
+ .restore = savagefb_resume,
+#endif
+};
+
+static const struct pci_device_id savagefb_devices[] = {
+ {PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_MX128,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE},
+
+ {PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_MX64,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE},
+
+ {PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_MX64C,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE},
+
+ {PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_IX128SDR,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE},
+
+ {PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_IX128DDR,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE},
+
+ {PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_IX64SDR,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE},
+
+ {PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_IX64DDR,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE},
+
+ {PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_IXCSDR,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE},
+
+ {PCI_VENDOR_ID_S3, PCI_CHIP_SUPSAV_IXCDDR,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SUPERSAVAGE},
+
+ {PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE4,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SAVAGE4},
+
+ {PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE3D,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SAVAGE3D},
+
+ {PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE3D_MV,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SAVAGE3D_MV},
+
+ {PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE2000,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SAVAGE2000},
+
+ {PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE_MX_MV,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SAVAGE_MX_MV},
+
+ {PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE_MX,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SAVAGE_MX},
+
+ {PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE_IX_MV,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SAVAGE_IX_MV},
+
+ {PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE_IX,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_SAVAGE_IX},
+
+ {PCI_VENDOR_ID_S3, PCI_CHIP_PROSAVAGE_PM,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_PROSAVAGE_PM},
+
+ {PCI_VENDOR_ID_S3, PCI_CHIP_PROSAVAGE_KM,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_PROSAVAGE_KM},
+
+ {PCI_VENDOR_ID_S3, PCI_CHIP_S3TWISTER_P,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_S3TWISTER_P},
+
+ {PCI_VENDOR_ID_S3, PCI_CHIP_S3TWISTER_K,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_S3TWISTER_K},
+
+ {PCI_VENDOR_ID_S3, PCI_CHIP_PROSAVAGE_DDR,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_PROSAVAGE_DDR},
+
+ {PCI_VENDOR_ID_S3, PCI_CHIP_PROSAVAGE_DDRK,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_PROSAVAGE_DDRK},
+
+ {0, 0, 0, 0, 0, 0, 0}
+};
+
+MODULE_DEVICE_TABLE(pci, savagefb_devices);
+
+static struct pci_driver savagefb_driver = {
+ .name = "savagefb",
+ .id_table = savagefb_devices,
+ .probe = savagefb_probe,
+ .driver.pm = &savagefb_pm_ops,
+ .remove = savagefb_remove,
+};
+
+/* **************************** exit-time only **************************** */
+
+static void __exit savage_done(void)
+{
+ DBG("savage_done");
+ pci_unregister_driver(&savagefb_driver);
+}
+
+
+/* ************************* init in-kernel code ************************** */
+
+static int __init savagefb_setup(char *options)
+{
+#ifndef MODULE
+ char *this_opt;
+
+ if (!options || !*options)
+ return 0;
+
+ while ((this_opt = strsep(&options, ",")) != NULL) {
+ mode_option = this_opt;
+ }
+#endif /* !MODULE */
+ return 0;
+}
+
+static int __init savagefb_init(void)
+{
+ char *option;
+
+ DBG("savagefb_init");
+
+ if (fb_modesetting_disabled("savagefb"))
+ return -ENODEV;
+
+ if (fb_get_options("savagefb", &option))
+ return -ENODEV;
+
+ savagefb_setup(option);
+ return pci_register_driver(&savagefb_driver);
+
+}
+
+module_init(savagefb_init);
+module_exit(savage_done);
+
+module_param(mode_option, charp, 0);
+MODULE_PARM_DESC(mode_option, "Specify initial video mode");