1 files changed, 668 insertions, 0 deletions

diff --git a/drivers/watchdog/f71808e_wdt.c b/drivers/watchdog/f71808e_wdt.c
new file mode 100644
index 0000000000..6a16d3d0bb
--- /dev/null
+++ b/drivers/watchdog/f71808e_wdt.c
@@ -0,0 +1,668 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/***************************************************************************
+ *   Copyright (C) 2006 by Hans Edgington <hans@edgington.nl>              *
+ *   Copyright (C) 2007-2009 Hans de Goede <hdegoede@redhat.com>           *
+ *   Copyright (C) 2010 Giel van Schijndel <me@mortis.eu>                  *
+ *                                                                         *
+ ***************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+
+#define DRVNAME "f71808e_wdt"
+
+#define SIO_F71808FG_LD_WDT	0x07	/* Watchdog timer logical device */
+#define SIO_UNLOCK_KEY		0x87	/* Key to enable Super-I/O */
+#define SIO_LOCK_KEY		0xAA	/* Key to disable Super-I/O */
+
+#define SIO_REG_LDSEL		0x07	/* Logical device select */
+#define SIO_REG_DEVID		0x20	/* Device ID (2 bytes) */
+#define SIO_REG_DEVREV		0x22	/* Device revision */
+#define SIO_REG_MANID		0x23	/* Fintek ID (2 bytes) */
+#define SIO_REG_CLOCK_SEL	0x26	/* Clock select */
+#define SIO_REG_ROM_ADDR_SEL	0x27	/* ROM address select */
+#define SIO_F81866_REG_PORT_SEL	0x27	/* F81866 Multi-Function Register */
+#define SIO_REG_TSI_LEVEL_SEL	0x28	/* TSI Level select */
+#define SIO_REG_MFUNCT1		0x29	/* Multi function select 1 */
+#define SIO_REG_MFUNCT2		0x2a	/* Multi function select 2 */
+#define SIO_REG_MFUNCT3		0x2b	/* Multi function select 3 */
+#define SIO_F81866_REG_GPIO1	0x2c	/* F81866 GPIO1 Enable Register */
+#define SIO_REG_ENABLE		0x30	/* Logical device enable */
+#define SIO_REG_ADDR		0x60	/* Logical device address (2 bytes) */
+
+#define SIO_FINTEK_ID		0x1934	/* Manufacturers ID */
+#define SIO_F71808_ID		0x0901	/* Chipset ID */
+#define SIO_F71858_ID		0x0507	/* Chipset ID */
+#define SIO_F71862_ID		0x0601	/* Chipset ID */
+#define SIO_F71868_ID		0x1106	/* Chipset ID */
+#define SIO_F71869_ID		0x0814	/* Chipset ID */
+#define SIO_F71869A_ID		0x1007	/* Chipset ID */
+#define SIO_F71882_ID		0x0541	/* Chipset ID */
+#define SIO_F71889_ID		0x0723	/* Chipset ID */
+#define SIO_F81803_ID		0x1210	/* Chipset ID */
+#define SIO_F81865_ID		0x0704	/* Chipset ID */
+#define SIO_F81866_ID		0x1010	/* Chipset ID */
+#define SIO_F81966_ID		0x1502  /* F81804 chipset ID, same for f81966 */
+
+#define F71808FG_REG_WDO_CONF		0xf0
+#define F71808FG_REG_WDT_CONF		0xf5
+#define F71808FG_REG_WD_TIME		0xf6
+
+#define F71808FG_FLAG_WDOUT_EN		7
+
+#define F71808FG_FLAG_WDTMOUT_STS	6
+#define F71808FG_FLAG_WD_EN		5
+#define F71808FG_FLAG_WD_PULSE		4
+#define F71808FG_FLAG_WD_UNIT		3
+
+#define F81865_REG_WDO_CONF		0xfa
+#define F81865_FLAG_WDOUT_EN		0
+
+/* Default values */
+#define WATCHDOG_TIMEOUT	60	/* 1 minute default timeout */
+#define WATCHDOG_MAX_TIMEOUT	(60 * 255)
+#define WATCHDOG_PULSE_WIDTH	125	/* 125 ms, default pulse width for
+					   watchdog signal */
+#define WATCHDOG_F71862FG_PIN	63	/* default watchdog reset output
+					   pin number 63 */
+
+static unsigned short force_id;
+module_param(force_id, ushort, 0);
+MODULE_PARM_DESC(force_id, "Override the detected device ID");
+
+static int timeout = WATCHDOG_TIMEOUT;	/* default timeout in seconds */
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout,
+	"Watchdog timeout in seconds. 1<= timeout <="
+			__MODULE_STRING(WATCHDOG_MAX_TIMEOUT) " (default="
+			__MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+
+static unsigned int pulse_width = WATCHDOG_PULSE_WIDTH;
+module_param(pulse_width, uint, 0);
+MODULE_PARM_DESC(pulse_width,
+	"Watchdog signal pulse width. 0(=level), 1, 25, 30, 125, 150, 5000 or 6000 ms"
+			" (default=" __MODULE_STRING(WATCHDOG_PULSE_WIDTH) ")");
+
+static unsigned int f71862fg_pin = WATCHDOG_F71862FG_PIN;
+module_param(f71862fg_pin, uint, 0);
+MODULE_PARM_DESC(f71862fg_pin,
+	"Watchdog f71862fg reset output pin configuration. Choose pin 56 or 63"
+			" (default=" __MODULE_STRING(WATCHDOG_F71862FG_PIN)")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0444);
+MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close");
+
+static unsigned int start_withtimeout;
+module_param(start_withtimeout, uint, 0);
+MODULE_PARM_DESC(start_withtimeout, "Start watchdog timer on module load with"
+	" given initial timeout. Zero (default) disables this feature.");
+
+enum chips { f71808fg, f71858fg, f71862fg, f71868, f71869, f71882fg, f71889fg,
+	     f81803, f81865, f81866, f81966};
+
+static const char * const fintek_wdt_names[] = {
+	"f71808fg",
+	"f71858fg",
+	"f71862fg",
+	"f71868",
+	"f71869",
+	"f71882fg",
+	"f71889fg",
+	"f81803",
+	"f81865",
+	"f81866",
+	"f81966"
+};
+
+/* Super-I/O Function prototypes */
+static inline int superio_inb(int base, int reg);
+static inline int superio_inw(int base, int reg);
+static inline void superio_outb(int base, int reg, u8 val);
+static inline void superio_set_bit(int base, int reg, int bit);
+static inline void superio_clear_bit(int base, int reg, int bit);
+static inline int superio_enter(int base);
+static inline void superio_select(int base, int ld);
+static inline void superio_exit(int base);
+
+struct fintek_wdt {
+	struct watchdog_device wdd;
+	unsigned short	sioaddr;
+	enum chips	type;
+	struct watchdog_info ident;
+
+	u8		timer_val;	/* content for the wd_time register */
+	char		minutes_mode;
+	u8		pulse_val;	/* pulse width flag */
+	char		pulse_mode;	/* enable pulse output mode? */
+};
+
+struct fintek_wdt_pdata {
+	enum chips	type;
+};
+
+/* Super I/O functions */
+static inline int superio_inb(int base, int reg)
+{
+	outb(reg, base);
+	return inb(base + 1);
+}
+
+static int superio_inw(int base, int reg)
+{
+	int val;
+	val  = superio_inb(base, reg) << 8;
+	val |= superio_inb(base, reg + 1);
+	return val;
+}
+
+static inline void superio_outb(int base, int reg, u8 val)
+{
+	outb(reg, base);
+	outb(val, base + 1);
+}
+
+static inline void superio_set_bit(int base, int reg, int bit)
+{
+	unsigned long val = superio_inb(base, reg);
+	__set_bit(bit, &val);
+	superio_outb(base, reg, val);
+}
+
+static inline void superio_clear_bit(int base, int reg, int bit)
+{
+	unsigned long val = superio_inb(base, reg);
+	__clear_bit(bit, &val);
+	superio_outb(base, reg, val);
+}
+
+static inline int superio_enter(int base)
+{
+	/* Don't step on other drivers' I/O space by accident */
+	if (!request_muxed_region(base, 2, DRVNAME)) {
+		pr_err("I/O address 0x%04x already in use\n", (int)base);
+		return -EBUSY;
+	}
+
+	/* according to the datasheet the key must be sent twice! */
+	outb(SIO_UNLOCK_KEY, base);
+	outb(SIO_UNLOCK_KEY, base);
+
+	return 0;
+}
+
+static inline void superio_select(int base, int ld)
+{
+	outb(SIO_REG_LDSEL, base);
+	outb(ld, base + 1);
+}
+
+static inline void superio_exit(int base)
+{
+	outb(SIO_LOCK_KEY, base);
+	release_region(base, 2);
+}
+
+static int fintek_wdt_set_timeout(struct watchdog_device *wdd, unsigned int timeout)
+{
+	struct fintek_wdt *wd = watchdog_get_drvdata(wdd);
+
+	if (timeout > 0xff) {
+		wd->timer_val = DIV_ROUND_UP(timeout, 60);
+		wd->minutes_mode = true;
+		timeout = wd->timer_val * 60;
+	} else {
+		wd->timer_val = timeout;
+		wd->minutes_mode = false;
+	}
+
+	wdd->timeout = timeout;
+
+	return 0;
+}
+
+static int fintek_wdt_set_pulse_width(struct fintek_wdt *wd, unsigned int pw)
+{
+	unsigned int t1 = 25, t2 = 125, t3 = 5000;
+
+	if (wd->type == f71868) {
+		t1 = 30;
+		t2 = 150;
+		t3 = 6000;
+	}
+
+	if        (pw <=  1) {
+		wd->pulse_val = 0;
+	} else if (pw <= t1) {
+		wd->pulse_val = 1;
+	} else if (pw <= t2) {
+		wd->pulse_val = 2;
+	} else if (pw <= t3) {
+		wd->pulse_val = 3;
+	} else {
+		pr_err("pulse width out of range\n");
+		return -EINVAL;
+	}
+
+	wd->pulse_mode = pw;
+
+	return 0;
+}
+
+static int fintek_wdt_keepalive(struct watchdog_device *wdd)
+{
+	struct fintek_wdt *wd = watchdog_get_drvdata(wdd);
+	int err;
+
+	err = superio_enter(wd->sioaddr);
+	if (err)
+		return err;
+	superio_select(wd->sioaddr, SIO_F71808FG_LD_WDT);
+
+	if (wd->minutes_mode)
+		/* select minutes for timer units */
+		superio_set_bit(wd->sioaddr, F71808FG_REG_WDT_CONF,
+				F71808FG_FLAG_WD_UNIT);
+	else
+		/* select seconds for timer units */
+		superio_clear_bit(wd->sioaddr, F71808FG_REG_WDT_CONF,
+				F71808FG_FLAG_WD_UNIT);
+
+	/* Set timer value */
+	superio_outb(wd->sioaddr, F71808FG_REG_WD_TIME,
+			   wd->timer_val);
+
+	superio_exit(wd->sioaddr);
+
+	return 0;
+}
+
+static int fintek_wdt_start(struct watchdog_device *wdd)
+{
+	struct fintek_wdt *wd = watchdog_get_drvdata(wdd);
+	int err;
+	u8 tmp;
+
+	/* Make sure we don't die as soon as the watchdog is enabled below */
+	err = fintek_wdt_keepalive(wdd);
+	if (err)
+		return err;
+
+	err = superio_enter(wd->sioaddr);
+	if (err)
+		return err;
+	superio_select(wd->sioaddr, SIO_F71808FG_LD_WDT);
+
+	/* Watchdog pin configuration */
+	switch (wd->type) {
+	case f71808fg:
+		/* Set pin 21 to GPIO23/WDTRST#, then to WDTRST# */
+		superio_clear_bit(wd->sioaddr, SIO_REG_MFUNCT2, 3);
+		superio_clear_bit(wd->sioaddr, SIO_REG_MFUNCT3, 3);
+		break;
+
+	case f71862fg:
+		if (f71862fg_pin == 63) {
+			/* SPI must be disabled first to use this pin! */
+			superio_clear_bit(wd->sioaddr, SIO_REG_ROM_ADDR_SEL, 6);
+			superio_set_bit(wd->sioaddr, SIO_REG_MFUNCT3, 4);
+		} else if (f71862fg_pin == 56) {
+			superio_set_bit(wd->sioaddr, SIO_REG_MFUNCT1, 1);
+		}
+		break;
+
+	case f71868:
+	case f71869:
+		/* GPIO14 --> WDTRST# */
+		superio_clear_bit(wd->sioaddr, SIO_REG_MFUNCT1, 4);
+		break;
+
+	case f71882fg:
+		/* Set pin 56 to WDTRST# */
+		superio_set_bit(wd->sioaddr, SIO_REG_MFUNCT1, 1);
+		break;
+
+	case f71889fg:
+		/* set pin 40 to WDTRST# */
+		superio_outb(wd->sioaddr, SIO_REG_MFUNCT3,
+			superio_inb(wd->sioaddr, SIO_REG_MFUNCT3) & 0xcf);
+		break;
+
+	case f81803:
+		/* Enable TSI Level register bank */
+		superio_clear_bit(wd->sioaddr, SIO_REG_CLOCK_SEL, 3);
+		/* Set pin 27 to WDTRST# */
+		superio_outb(wd->sioaddr, SIO_REG_TSI_LEVEL_SEL, 0x5f &
+			superio_inb(wd->sioaddr, SIO_REG_TSI_LEVEL_SEL));
+		break;
+
+	case f81865:
+		/* Set pin 70 to WDTRST# */
+		superio_clear_bit(wd->sioaddr, SIO_REG_MFUNCT3, 5);
+		break;
+
+	case f81866:
+	case f81966:
+		/*
+		 * GPIO1 Control Register when 27h BIT3:2 = 01 & BIT0 = 0.
+		 * The PIN 70(GPIO15/WDTRST) is controlled by 2Ch:
+		 *     BIT5: 0 -> WDTRST#
+		 *           1 -> GPIO15
+		 */
+		tmp = superio_inb(wd->sioaddr, SIO_F81866_REG_PORT_SEL);
+		tmp &= ~(BIT(3) | BIT(0));
+		tmp |= BIT(2);
+		superio_outb(wd->sioaddr, SIO_F81866_REG_PORT_SEL, tmp);
+
+		superio_clear_bit(wd->sioaddr, SIO_F81866_REG_GPIO1, 5);
+		break;
+
+	default:
+		/*
+		 * 'default' label to shut up the compiler and catch
+		 * programmer errors
+		 */
+		err = -ENODEV;
+		goto exit_superio;
+	}
+
+	superio_select(wd->sioaddr, SIO_F71808FG_LD_WDT);
+	superio_set_bit(wd->sioaddr, SIO_REG_ENABLE, 0);
+
+	if (wd->type == f81865 || wd->type == f81866 || wd->type == f81966)
+		superio_set_bit(wd->sioaddr, F81865_REG_WDO_CONF,
+				F81865_FLAG_WDOUT_EN);
+	else
+		superio_set_bit(wd->sioaddr, F71808FG_REG_WDO_CONF,
+				F71808FG_FLAG_WDOUT_EN);
+
+	superio_set_bit(wd->sioaddr, F71808FG_REG_WDT_CONF,
+			F71808FG_FLAG_WD_EN);
+
+	if (wd->pulse_mode) {
+		/* Select "pulse" output mode with given duration */
+		u8 wdt_conf = superio_inb(wd->sioaddr,
+				F71808FG_REG_WDT_CONF);
+
+		/* Set WD_PSWIDTH bits (1:0) */
+		wdt_conf = (wdt_conf & 0xfc) | (wd->pulse_val & 0x03);
+		/* Set WD_PULSE to "pulse" mode */
+		wdt_conf |= BIT(F71808FG_FLAG_WD_PULSE);
+
+		superio_outb(wd->sioaddr, F71808FG_REG_WDT_CONF,
+				wdt_conf);
+	} else {
+		/* Select "level" output mode */
+		superio_clear_bit(wd->sioaddr, F71808FG_REG_WDT_CONF,
+				F71808FG_FLAG_WD_PULSE);
+	}
+
+exit_superio:
+	superio_exit(wd->sioaddr);
+
+	return err;
+}
+
+static int fintek_wdt_stop(struct watchdog_device *wdd)
+{
+	struct fintek_wdt *wd = watchdog_get_drvdata(wdd);
+	int err;
+
+	err = superio_enter(wd->sioaddr);
+	if (err)
+		return err;
+	superio_select(wd->sioaddr, SIO_F71808FG_LD_WDT);
+
+	superio_clear_bit(wd->sioaddr, F71808FG_REG_WDT_CONF,
+			F71808FG_FLAG_WD_EN);
+
+	superio_exit(wd->sioaddr);
+
+	return 0;
+}
+
+static bool fintek_wdt_is_running(struct fintek_wdt *wd, u8 wdt_conf)
+{
+	return (superio_inb(wd->sioaddr, SIO_REG_ENABLE) & BIT(0))
+		&& (wdt_conf & BIT(F71808FG_FLAG_WD_EN));
+}
+
+static const struct watchdog_ops fintek_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = fintek_wdt_start,
+	.stop = fintek_wdt_stop,
+	.ping = fintek_wdt_keepalive,
+	.set_timeout = fintek_wdt_set_timeout,
+};
+
+static int fintek_wdt_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct fintek_wdt_pdata *pdata;
+	struct watchdog_device *wdd;
+	struct fintek_wdt *wd;
+	int wdt_conf, err = 0;
+	struct resource *res;
+	int sioaddr;
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (!res)
+		return -ENXIO;
+
+	sioaddr = res->start;
+
+	wd = devm_kzalloc(dev, sizeof(*wd), GFP_KERNEL);
+	if (!wd)
+		return -ENOMEM;
+
+	pdata = dev->platform_data;
+
+	wd->type = pdata->type;
+	wd->sioaddr = sioaddr;
+	wd->ident.options = WDIOF_SETTIMEOUT
+			| WDIOF_MAGICCLOSE
+			| WDIOF_KEEPALIVEPING
+			| WDIOF_CARDRESET;
+
+	snprintf(wd->ident.identity,
+		sizeof(wd->ident.identity), "%s watchdog",
+		fintek_wdt_names[wd->type]);
+
+	err = superio_enter(sioaddr);
+	if (err)
+		return err;
+	superio_select(wd->sioaddr, SIO_F71808FG_LD_WDT);
+
+	wdt_conf = superio_inb(sioaddr, F71808FG_REG_WDT_CONF);
+
+	/*
+	 * We don't want WDTMOUT_STS to stick around till regular reboot.
+	 * Write 1 to the bit to clear it to zero.
+	 */
+	superio_outb(sioaddr, F71808FG_REG_WDT_CONF,
+		     wdt_conf | BIT(F71808FG_FLAG_WDTMOUT_STS));
+
+	wdd = &wd->wdd;
+
+	if (fintek_wdt_is_running(wd, wdt_conf))
+		set_bit(WDOG_HW_RUNNING, &wdd->status);
+
+	superio_exit(sioaddr);
+
+	wdd->parent		= dev;
+	wdd->info               = &wd->ident;
+	wdd->ops                = &fintek_wdt_ops;
+	wdd->min_timeout        = 1;
+	wdd->max_timeout        = WATCHDOG_MAX_TIMEOUT;
+
+	watchdog_set_drvdata(wdd, wd);
+	watchdog_set_nowayout(wdd, nowayout);
+	watchdog_stop_on_unregister(wdd);
+	watchdog_stop_on_reboot(wdd);
+	watchdog_init_timeout(wdd, start_withtimeout ?: timeout, NULL);
+
+	if (wdt_conf & BIT(F71808FG_FLAG_WDTMOUT_STS))
+		wdd->bootstatus = WDIOF_CARDRESET;
+
+	/*
+	 * WATCHDOG_HANDLE_BOOT_ENABLED can result in keepalive being directly
+	 * called without a set_timeout before, so it needs to be done here
+	 * unconditionally.
+	 */
+	fintek_wdt_set_timeout(wdd, wdd->timeout);
+	fintek_wdt_set_pulse_width(wd, pulse_width);
+
+	if (start_withtimeout) {
+		err = fintek_wdt_start(wdd);
+		if (err) {
+			dev_err(dev, "cannot start watchdog timer\n");
+			return err;
+		}
+
+		set_bit(WDOG_HW_RUNNING, &wdd->status);
+		dev_info(dev, "watchdog started with initial timeout of %u sec\n",
+			 start_withtimeout);
+	}
+
+	return devm_watchdog_register_device(dev, wdd);
+}
+
+static int __init fintek_wdt_find(int sioaddr)
+{
+	enum chips type;
+	u16 devid;
+	int err = superio_enter(sioaddr);
+	if (err)
+		return err;
+
+	devid = superio_inw(sioaddr, SIO_REG_MANID);
+	if (devid != SIO_FINTEK_ID) {
+		pr_debug("Not a Fintek device\n");
+		err = -ENODEV;
+		goto exit;
+	}
+
+	devid = force_id ? force_id : superio_inw(sioaddr, SIO_REG_DEVID);
+	switch (devid) {
+	case SIO_F71808_ID:
+		type = f71808fg;
+		break;
+	case SIO_F71862_ID:
+		type = f71862fg;
+		break;
+	case SIO_F71868_ID:
+		type = f71868;
+		break;
+	case SIO_F71869_ID:
+	case SIO_F71869A_ID:
+		type = f71869;
+		break;
+	case SIO_F71882_ID:
+		type = f71882fg;
+		break;
+	case SIO_F71889_ID:
+		type = f71889fg;
+		break;
+	case SIO_F71858_ID:
+		/* Confirmed (by datasheet) not to have a watchdog. */
+		err = -ENODEV;
+		goto exit;
+	case SIO_F81803_ID:
+		type = f81803;
+		break;
+	case SIO_F81865_ID:
+		type = f81865;
+		break;
+	case SIO_F81866_ID:
+		type = f81866;
+		break;
+	case SIO_F81966_ID:
+		type = f81966;
+		break;
+	default:
+		pr_info("Unrecognized Fintek device: %04x\n",
+			(unsigned int)devid);
+		err = -ENODEV;
+		goto exit;
+	}
+
+	pr_info("Found %s watchdog chip, revision %d\n",
+		fintek_wdt_names[type],
+		(int)superio_inb(sioaddr, SIO_REG_DEVREV));
+
+exit:
+	superio_exit(sioaddr);
+	return err ? err : type;
+}
+
+static struct platform_driver fintek_wdt_driver = {
+	.probe          = fintek_wdt_probe,
+	.driver         = {
+		.name   = DRVNAME,
+	},
+};
+
+static struct platform_device *fintek_wdt_pdev;
+
+static int __init fintek_wdt_init(void)
+{
+	static const unsigned short addrs[] = { 0x2e, 0x4e };
+	struct fintek_wdt_pdata pdata;
+	struct resource wdt_res = {};
+	int ret;
+	int i;
+
+	if (f71862fg_pin != 63 && f71862fg_pin != 56) {
+		pr_err("Invalid argument f71862fg_pin=%d\n", f71862fg_pin);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(addrs); i++) {
+		ret = fintek_wdt_find(addrs[i]);
+		if (ret >= 0)
+			break;
+	}
+	if (i == ARRAY_SIZE(addrs))
+		return ret;
+
+	pdata.type = ret;
+
+	ret = platform_driver_register(&fintek_wdt_driver);
+	if (ret)
+		return ret;
+
+	wdt_res.name = "superio port";
+	wdt_res.flags = IORESOURCE_IO;
+	wdt_res.start = addrs[i];
+	wdt_res.end   = addrs[i] + 1;
+
+	fintek_wdt_pdev = platform_device_register_resndata(NULL, DRVNAME, -1,
+							    &wdt_res, 1,
+							    &pdata, sizeof(pdata));
+	if (IS_ERR(fintek_wdt_pdev)) {
+		platform_driver_unregister(&fintek_wdt_driver);
+		return PTR_ERR(fintek_wdt_pdev);
+	}
+
+	return 0;
+}
+
+static void __exit fintek_wdt_exit(void)
+{
+	platform_device_unregister(fintek_wdt_pdev);
+	platform_driver_unregister(&fintek_wdt_driver);
+}
+
+MODULE_DESCRIPTION("F71808E Watchdog Driver");
+MODULE_AUTHOR("Giel van Schijndel <me@mortis.eu>");
+MODULE_LICENSE("GPL");
+
+module_init(fintek_wdt_init);
+module_exit(fintek_wdt_exit);