diff options
Diffstat (limited to '')
-rw-r--r-- | fs/btrfs/tests/free-space-tests.c | 1063 |
1 files changed, 1063 insertions, 0 deletions
diff --git a/fs/btrfs/tests/free-space-tests.c b/fs/btrfs/tests/free-space-tests.c new file mode 100644 index 0000000000..ebf68fcd21 --- /dev/null +++ b/fs/btrfs/tests/free-space-tests.c @@ -0,0 +1,1063 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2013 Fusion IO. All rights reserved. + */ + +#include <linux/slab.h> +#include "btrfs-tests.h" +#include "../ctree.h" +#include "../disk-io.h" +#include "../free-space-cache.h" +#include "../block-group.h" + +#define BITS_PER_BITMAP (PAGE_SIZE * 8UL) + +/* + * This test just does basic sanity checking, making sure we can add an extent + * entry and remove space from either end and the middle, and make sure we can + * remove space that covers adjacent extent entries. + */ +static int test_extents(struct btrfs_block_group *cache) +{ + int ret = 0; + + test_msg("running extent only tests"); + + /* First just make sure we can remove an entire entry */ + ret = btrfs_add_free_space(cache, 0, SZ_4M); + if (ret) { + test_err("error adding initial extents %d", ret); + return ret; + } + + ret = btrfs_remove_free_space(cache, 0, SZ_4M); + if (ret) { + test_err("error removing extent %d", ret); + return ret; + } + + if (test_check_exists(cache, 0, SZ_4M)) { + test_err("full remove left some lingering space"); + return -1; + } + + /* Ok edge and middle cases now */ + ret = btrfs_add_free_space(cache, 0, SZ_4M); + if (ret) { + test_err("error adding half extent %d", ret); + return ret; + } + + ret = btrfs_remove_free_space(cache, 3 * SZ_1M, SZ_1M); + if (ret) { + test_err("error removing tail end %d", ret); + return ret; + } + + ret = btrfs_remove_free_space(cache, 0, SZ_1M); + if (ret) { + test_err("error removing front end %d", ret); + return ret; + } + + ret = btrfs_remove_free_space(cache, SZ_2M, 4096); + if (ret) { + test_err("error removing middle piece %d", ret); + return ret; + } + + if (test_check_exists(cache, 0, SZ_1M)) { + test_err("still have space at the front"); + return -1; + } + + if (test_check_exists(cache, SZ_2M, 4096)) { + test_err("still have space in the middle"); + return -1; + } + + if (test_check_exists(cache, 3 * SZ_1M, SZ_1M)) { + test_err("still have space at the end"); + return -1; + } + + /* Cleanup */ + btrfs_remove_free_space_cache(cache); + + return 0; +} + +static int test_bitmaps(struct btrfs_block_group *cache, u32 sectorsize) +{ + u64 next_bitmap_offset; + int ret; + + test_msg("running bitmap only tests"); + + ret = test_add_free_space_entry(cache, 0, SZ_4M, 1); + if (ret) { + test_err("couldn't create a bitmap entry %d", ret); + return ret; + } + + ret = btrfs_remove_free_space(cache, 0, SZ_4M); + if (ret) { + test_err("error removing bitmap full range %d", ret); + return ret; + } + + if (test_check_exists(cache, 0, SZ_4M)) { + test_err("left some space in bitmap"); + return -1; + } + + ret = test_add_free_space_entry(cache, 0, SZ_4M, 1); + if (ret) { + test_err("couldn't add to our bitmap entry %d", ret); + return ret; + } + + ret = btrfs_remove_free_space(cache, SZ_1M, SZ_2M); + if (ret) { + test_err("couldn't remove middle chunk %d", ret); + return ret; + } + + /* + * The first bitmap we have starts at offset 0 so the next one is just + * at the end of the first bitmap. + */ + next_bitmap_offset = (u64)(BITS_PER_BITMAP * sectorsize); + + /* Test a bit straddling two bitmaps */ + ret = test_add_free_space_entry(cache, next_bitmap_offset - SZ_2M, + SZ_4M, 1); + if (ret) { + test_err("couldn't add space that straddles two bitmaps %d", + ret); + return ret; + } + + ret = btrfs_remove_free_space(cache, next_bitmap_offset - SZ_1M, SZ_2M); + if (ret) { + test_err("couldn't remove overlapping space %d", ret); + return ret; + } + + if (test_check_exists(cache, next_bitmap_offset - SZ_1M, SZ_2M)) { + test_err("left some space when removing overlapping"); + return -1; + } + + btrfs_remove_free_space_cache(cache); + + return 0; +} + +/* This is the high grade jackassery */ +static int test_bitmaps_and_extents(struct btrfs_block_group *cache, + u32 sectorsize) +{ + u64 bitmap_offset = (u64)(BITS_PER_BITMAP * sectorsize); + int ret; + + test_msg("running bitmap and extent tests"); + + /* + * First let's do something simple, an extent at the same offset as the + * bitmap, but the free space completely in the extent and then + * completely in the bitmap. + */ + ret = test_add_free_space_entry(cache, SZ_4M, SZ_1M, 1); + if (ret) { + test_err("couldn't create bitmap entry %d", ret); + return ret; + } + + ret = test_add_free_space_entry(cache, 0, SZ_1M, 0); + if (ret) { + test_err("couldn't add extent entry %d", ret); + return ret; + } + + ret = btrfs_remove_free_space(cache, 0, SZ_1M); + if (ret) { + test_err("couldn't remove extent entry %d", ret); + return ret; + } + + if (test_check_exists(cache, 0, SZ_1M)) { + test_err("left remnants after our remove"); + return -1; + } + + /* Now to add back the extent entry and remove from the bitmap */ + ret = test_add_free_space_entry(cache, 0, SZ_1M, 0); + if (ret) { + test_err("couldn't re-add extent entry %d", ret); + return ret; + } + + ret = btrfs_remove_free_space(cache, SZ_4M, SZ_1M); + if (ret) { + test_err("couldn't remove from bitmap %d", ret); + return ret; + } + + if (test_check_exists(cache, SZ_4M, SZ_1M)) { + test_err("left remnants in the bitmap"); + return -1; + } + + /* + * Ok so a little more evil, extent entry and bitmap at the same offset, + * removing an overlapping chunk. + */ + ret = test_add_free_space_entry(cache, SZ_1M, SZ_4M, 1); + if (ret) { + test_err("couldn't add to a bitmap %d", ret); + return ret; + } + + ret = btrfs_remove_free_space(cache, SZ_512K, 3 * SZ_1M); + if (ret) { + test_err("couldn't remove overlapping space %d", ret); + return ret; + } + + if (test_check_exists(cache, SZ_512K, 3 * SZ_1M)) { + test_err("left over pieces after removing overlapping"); + return -1; + } + + btrfs_remove_free_space_cache(cache); + + /* Now with the extent entry offset into the bitmap */ + ret = test_add_free_space_entry(cache, SZ_4M, SZ_4M, 1); + if (ret) { + test_err("couldn't add space to the bitmap %d", ret); + return ret; + } + + ret = test_add_free_space_entry(cache, SZ_2M, SZ_2M, 0); + if (ret) { + test_err("couldn't add extent to the cache %d", ret); + return ret; + } + + ret = btrfs_remove_free_space(cache, 3 * SZ_1M, SZ_4M); + if (ret) { + test_err("problem removing overlapping space %d", ret); + return ret; + } + + if (test_check_exists(cache, 3 * SZ_1M, SZ_4M)) { + test_err("left something behind when removing space"); + return -1; + } + + /* + * This has blown up in the past, the extent entry starts before the + * bitmap entry, but we're trying to remove an offset that falls + * completely within the bitmap range and is in both the extent entry + * and the bitmap entry, looks like this + * + * [ extent ] + * [ bitmap ] + * [ del ] + */ + btrfs_remove_free_space_cache(cache); + ret = test_add_free_space_entry(cache, bitmap_offset + SZ_4M, SZ_4M, 1); + if (ret) { + test_err("couldn't add bitmap %d", ret); + return ret; + } + + ret = test_add_free_space_entry(cache, bitmap_offset - SZ_1M, + 5 * SZ_1M, 0); + if (ret) { + test_err("couldn't add extent entry %d", ret); + return ret; + } + + ret = btrfs_remove_free_space(cache, bitmap_offset + SZ_1M, 5 * SZ_1M); + if (ret) { + test_err("failed to free our space %d", ret); + return ret; + } + + if (test_check_exists(cache, bitmap_offset + SZ_1M, 5 * SZ_1M)) { + test_err("left stuff over"); + return -1; + } + + btrfs_remove_free_space_cache(cache); + + /* + * This blew up before, we have part of the free space in a bitmap and + * then the entirety of the rest of the space in an extent. This used + * to return -EAGAIN back from btrfs_remove_extent, make sure this + * doesn't happen. + */ + ret = test_add_free_space_entry(cache, SZ_1M, SZ_2M, 1); + if (ret) { + test_err("couldn't add bitmap entry %d", ret); + return ret; + } + + ret = test_add_free_space_entry(cache, 3 * SZ_1M, SZ_1M, 0); + if (ret) { + test_err("couldn't add extent entry %d", ret); + return ret; + } + + ret = btrfs_remove_free_space(cache, SZ_1M, 3 * SZ_1M); + if (ret) { + test_err("error removing bitmap and extent overlapping %d", ret); + return ret; + } + + btrfs_remove_free_space_cache(cache); + return 0; +} + +/* Used by test_steal_space_from_bitmap_to_extent(). */ +static bool test_use_bitmap(struct btrfs_free_space_ctl *ctl, + struct btrfs_free_space *info) +{ + return ctl->free_extents > 0; +} + +/* Used by test_steal_space_from_bitmap_to_extent(). */ +static int +check_num_extents_and_bitmaps(const struct btrfs_block_group *cache, + const int num_extents, + const int num_bitmaps) +{ + if (cache->free_space_ctl->free_extents != num_extents) { + test_err( + "incorrect # of extent entries in the cache: %d, expected %d", + cache->free_space_ctl->free_extents, num_extents); + return -EINVAL; + } + if (cache->free_space_ctl->total_bitmaps != num_bitmaps) { + test_err( + "incorrect # of extent entries in the cache: %d, expected %d", + cache->free_space_ctl->total_bitmaps, num_bitmaps); + return -EINVAL; + } + return 0; +} + +/* Used by test_steal_space_from_bitmap_to_extent(). */ +static int check_cache_empty(struct btrfs_block_group *cache) +{ + u64 offset; + u64 max_extent_size; + + /* + * Now lets confirm that there's absolutely no free space left to + * allocate. + */ + if (cache->free_space_ctl->free_space != 0) { + test_err("cache free space is not 0"); + return -EINVAL; + } + + /* And any allocation request, no matter how small, should fail now. */ + offset = btrfs_find_space_for_alloc(cache, 0, 4096, 0, + &max_extent_size); + if (offset != 0) { + test_err("space allocation did not fail, returned offset: %llu", + offset); + return -EINVAL; + } + + /* And no extent nor bitmap entries in the cache anymore. */ + return check_num_extents_and_bitmaps(cache, 0, 0); +} + +/* + * Before we were able to steal free space from a bitmap entry to an extent + * entry, we could end up with 2 entries representing a contiguous free space. + * One would be an extent entry and the other a bitmap entry. Since in order + * to allocate space to a caller we use only 1 entry, we couldn't return that + * whole range to the caller if it was requested. This forced the caller to + * either assume ENOSPC or perform several smaller space allocations, which + * wasn't optimal as they could be spread all over the block group while under + * concurrency (extra overhead and fragmentation). + * + * This stealing approach is beneficial, since we always prefer to allocate + * from extent entries, both for clustered and non-clustered allocation + * requests. + */ +static int +test_steal_space_from_bitmap_to_extent(struct btrfs_block_group *cache, + u32 sectorsize) +{ + int ret; + u64 offset; + u64 max_extent_size; + const struct btrfs_free_space_op test_free_space_ops = { + .use_bitmap = test_use_bitmap, + }; + const struct btrfs_free_space_op *orig_free_space_ops; + + test_msg("running space stealing from bitmap to extent tests"); + + /* + * For this test, we want to ensure we end up with an extent entry + * immediately adjacent to a bitmap entry, where the bitmap starts + * at an offset where the extent entry ends. We keep adding and + * removing free space to reach into this state, but to get there + * we need to reach a point where marking new free space doesn't + * result in adding new extent entries or merging the new space + * with existing extent entries - the space ends up being marked + * in an existing bitmap that covers the new free space range. + * + * To get there, we need to reach the threshold defined set at + * cache->free_space_ctl->extents_thresh, which currently is + * 256 extents on a x86_64 system at least, and a few other + * conditions (check free_space_cache.c). Instead of making the + * test much longer and complicated, use a "use_bitmap" operation + * that forces use of bitmaps as soon as we have at least 1 + * extent entry. + */ + orig_free_space_ops = cache->free_space_ctl->op; + cache->free_space_ctl->op = &test_free_space_ops; + + /* + * Extent entry covering free space range [128Mb - 256Kb, 128Mb - 128Kb[ + */ + ret = test_add_free_space_entry(cache, SZ_128M - SZ_256K, SZ_128K, 0); + if (ret) { + test_err("couldn't add extent entry %d", ret); + return ret; + } + + /* Bitmap entry covering free space range [128Mb + 512Kb, 256Mb[ */ + ret = test_add_free_space_entry(cache, SZ_128M + SZ_512K, + SZ_128M - SZ_512K, 1); + if (ret) { + test_err("couldn't add bitmap entry %d", ret); + return ret; + } + + ret = check_num_extents_and_bitmaps(cache, 2, 1); + if (ret) + return ret; + + /* + * Now make only the first 256Kb of the bitmap marked as free, so that + * we end up with only the following ranges marked as free space: + * + * [128Mb - 256Kb, 128Mb - 128Kb[ + * [128Mb + 512Kb, 128Mb + 768Kb[ + */ + ret = btrfs_remove_free_space(cache, + SZ_128M + 768 * SZ_1K, + SZ_128M - 768 * SZ_1K); + if (ret) { + test_err("failed to free part of bitmap space %d", ret); + return ret; + } + + /* Confirm that only those 2 ranges are marked as free. */ + if (!test_check_exists(cache, SZ_128M - SZ_256K, SZ_128K)) { + test_err("free space range missing"); + return -ENOENT; + } + if (!test_check_exists(cache, SZ_128M + SZ_512K, SZ_256K)) { + test_err("free space range missing"); + return -ENOENT; + } + + /* + * Confirm that the bitmap range [128Mb + 768Kb, 256Mb[ isn't marked + * as free anymore. + */ + if (test_check_exists(cache, SZ_128M + 768 * SZ_1K, + SZ_128M - 768 * SZ_1K)) { + test_err("bitmap region not removed from space cache"); + return -EINVAL; + } + + /* + * Confirm that the region [128Mb + 256Kb, 128Mb + 512Kb[, which is + * covered by the bitmap, isn't marked as free. + */ + if (test_check_exists(cache, SZ_128M + SZ_256K, SZ_256K)) { + test_err("invalid bitmap region marked as free"); + return -EINVAL; + } + + /* + * Confirm that the region [128Mb, 128Mb + 256Kb[, which is covered + * by the bitmap too, isn't marked as free either. + */ + if (test_check_exists(cache, SZ_128M, SZ_256K)) { + test_err("invalid bitmap region marked as free"); + return -EINVAL; + } + + /* + * Now lets mark the region [128Mb, 128Mb + 512Kb[ as free too. But, + * lets make sure the free space cache marks it as free in the bitmap, + * and doesn't insert a new extent entry to represent this region. + */ + ret = btrfs_add_free_space(cache, SZ_128M, SZ_512K); + if (ret) { + test_err("error adding free space: %d", ret); + return ret; + } + /* Confirm the region is marked as free. */ + if (!test_check_exists(cache, SZ_128M, SZ_512K)) { + test_err("bitmap region not marked as free"); + return -ENOENT; + } + + /* + * Confirm that no new extent entries or bitmap entries were added to + * the cache after adding that free space region. + */ + ret = check_num_extents_and_bitmaps(cache, 2, 1); + if (ret) + return ret; + + /* + * Now lets add a small free space region to the right of the previous + * one, which is not contiguous with it and is part of the bitmap too. + * The goal is to test that the bitmap entry space stealing doesn't + * steal this space region. + */ + ret = btrfs_add_free_space(cache, SZ_128M + SZ_16M, sectorsize); + if (ret) { + test_err("error adding free space: %d", ret); + return ret; + } + + /* + * Confirm that no new extent entries or bitmap entries were added to + * the cache after adding that free space region. + */ + ret = check_num_extents_and_bitmaps(cache, 2, 1); + if (ret) + return ret; + + /* + * Now mark the region [128Mb - 128Kb, 128Mb[ as free too. This will + * expand the range covered by the existing extent entry that represents + * the free space [128Mb - 256Kb, 128Mb - 128Kb[. + */ + ret = btrfs_add_free_space(cache, SZ_128M - SZ_128K, SZ_128K); + if (ret) { + test_err("error adding free space: %d", ret); + return ret; + } + /* Confirm the region is marked as free. */ + if (!test_check_exists(cache, SZ_128M - SZ_128K, SZ_128K)) { + test_err("extent region not marked as free"); + return -ENOENT; + } + + /* + * Confirm that our extent entry didn't stole all free space from the + * bitmap, because of the small 4Kb free space region. + */ + ret = check_num_extents_and_bitmaps(cache, 2, 1); + if (ret) + return ret; + + /* + * So now we have the range [128Mb - 256Kb, 128Mb + 768Kb[ as free + * space. Without stealing bitmap free space into extent entry space, + * we would have all this free space represented by 2 entries in the + * cache: + * + * extent entry covering range: [128Mb - 256Kb, 128Mb[ + * bitmap entry covering range: [128Mb, 128Mb + 768Kb[ + * + * Attempting to allocate the whole free space (1Mb) would fail, because + * we can't allocate from multiple entries. + * With the bitmap free space stealing, we get a single extent entry + * that represents the 1Mb free space, and therefore we're able to + * allocate the whole free space at once. + */ + if (!test_check_exists(cache, SZ_128M - SZ_256K, SZ_1M)) { + test_err("expected region not marked as free"); + return -ENOENT; + } + + if (cache->free_space_ctl->free_space != (SZ_1M + sectorsize)) { + test_err("cache free space is not 1Mb + %u", sectorsize); + return -EINVAL; + } + + offset = btrfs_find_space_for_alloc(cache, + 0, SZ_1M, 0, + &max_extent_size); + if (offset != (SZ_128M - SZ_256K)) { + test_err( + "failed to allocate 1Mb from space cache, returned offset is: %llu", + offset); + return -EINVAL; + } + + /* + * All that remains is a sectorsize free space region in a bitmap. + * Confirm. + */ + ret = check_num_extents_and_bitmaps(cache, 1, 1); + if (ret) + return ret; + + if (cache->free_space_ctl->free_space != sectorsize) { + test_err("cache free space is not %u", sectorsize); + return -EINVAL; + } + + offset = btrfs_find_space_for_alloc(cache, + 0, sectorsize, 0, + &max_extent_size); + if (offset != (SZ_128M + SZ_16M)) { + test_err("failed to allocate %u, returned offset : %llu", + sectorsize, offset); + return -EINVAL; + } + + ret = check_cache_empty(cache); + if (ret) + return ret; + + btrfs_remove_free_space_cache(cache); + + /* + * Now test a similar scenario, but where our extent entry is located + * to the right of the bitmap entry, so that we can check that stealing + * space from a bitmap to the front of an extent entry works. + */ + + /* + * Extent entry covering free space range [128Mb + 128Kb, 128Mb + 256Kb[ + */ + ret = test_add_free_space_entry(cache, SZ_128M + SZ_128K, SZ_128K, 0); + if (ret) { + test_err("couldn't add extent entry %d", ret); + return ret; + } + + /* Bitmap entry covering free space range [0, 128Mb - 512Kb[ */ + ret = test_add_free_space_entry(cache, 0, SZ_128M - SZ_512K, 1); + if (ret) { + test_err("couldn't add bitmap entry %d", ret); + return ret; + } + + ret = check_num_extents_and_bitmaps(cache, 2, 1); + if (ret) + return ret; + + /* + * Now make only the last 256Kb of the bitmap marked as free, so that + * we end up with only the following ranges marked as free space: + * + * [128Mb + 128b, 128Mb + 256Kb[ + * [128Mb - 768Kb, 128Mb - 512Kb[ + */ + ret = btrfs_remove_free_space(cache, 0, SZ_128M - 768 * SZ_1K); + if (ret) { + test_err("failed to free part of bitmap space %d", ret); + return ret; + } + + /* Confirm that only those 2 ranges are marked as free. */ + if (!test_check_exists(cache, SZ_128M + SZ_128K, SZ_128K)) { + test_err("free space range missing"); + return -ENOENT; + } + if (!test_check_exists(cache, SZ_128M - 768 * SZ_1K, SZ_256K)) { + test_err("free space range missing"); + return -ENOENT; + } + + /* + * Confirm that the bitmap range [0, 128Mb - 768Kb[ isn't marked + * as free anymore. + */ + if (test_check_exists(cache, 0, SZ_128M - 768 * SZ_1K)) { + test_err("bitmap region not removed from space cache"); + return -EINVAL; + } + + /* + * Confirm that the region [128Mb - 512Kb, 128Mb[, which is + * covered by the bitmap, isn't marked as free. + */ + if (test_check_exists(cache, SZ_128M - SZ_512K, SZ_512K)) { + test_err("invalid bitmap region marked as free"); + return -EINVAL; + } + + /* + * Now lets mark the region [128Mb - 512Kb, 128Mb[ as free too. But, + * lets make sure the free space cache marks it as free in the bitmap, + * and doesn't insert a new extent entry to represent this region. + */ + ret = btrfs_add_free_space(cache, SZ_128M - SZ_512K, SZ_512K); + if (ret) { + test_err("error adding free space: %d", ret); + return ret; + } + /* Confirm the region is marked as free. */ + if (!test_check_exists(cache, SZ_128M - SZ_512K, SZ_512K)) { + test_err("bitmap region not marked as free"); + return -ENOENT; + } + + /* + * Confirm that no new extent entries or bitmap entries were added to + * the cache after adding that free space region. + */ + ret = check_num_extents_and_bitmaps(cache, 2, 1); + if (ret) + return ret; + + /* + * Now lets add a small free space region to the left of the previous + * one, which is not contiguous with it and is part of the bitmap too. + * The goal is to test that the bitmap entry space stealing doesn't + * steal this space region. + */ + ret = btrfs_add_free_space(cache, SZ_32M, 2 * sectorsize); + if (ret) { + test_err("error adding free space: %d", ret); + return ret; + } + + /* + * Now mark the region [128Mb, 128Mb + 128Kb[ as free too. This will + * expand the range covered by the existing extent entry that represents + * the free space [128Mb + 128Kb, 128Mb + 256Kb[. + */ + ret = btrfs_add_free_space(cache, SZ_128M, SZ_128K); + if (ret) { + test_err("error adding free space: %d", ret); + return ret; + } + /* Confirm the region is marked as free. */ + if (!test_check_exists(cache, SZ_128M, SZ_128K)) { + test_err("extent region not marked as free"); + return -ENOENT; + } + + /* + * Confirm that our extent entry didn't stole all free space from the + * bitmap, because of the small 2 * sectorsize free space region. + */ + ret = check_num_extents_and_bitmaps(cache, 2, 1); + if (ret) + return ret; + + /* + * So now we have the range [128Mb - 768Kb, 128Mb + 256Kb[ as free + * space. Without stealing bitmap free space into extent entry space, + * we would have all this free space represented by 2 entries in the + * cache: + * + * extent entry covering range: [128Mb, 128Mb + 256Kb[ + * bitmap entry covering range: [128Mb - 768Kb, 128Mb[ + * + * Attempting to allocate the whole free space (1Mb) would fail, because + * we can't allocate from multiple entries. + * With the bitmap free space stealing, we get a single extent entry + * that represents the 1Mb free space, and therefore we're able to + * allocate the whole free space at once. + */ + if (!test_check_exists(cache, SZ_128M - 768 * SZ_1K, SZ_1M)) { + test_err("expected region not marked as free"); + return -ENOENT; + } + + if (cache->free_space_ctl->free_space != (SZ_1M + 2 * sectorsize)) { + test_err("cache free space is not 1Mb + %u", 2 * sectorsize); + return -EINVAL; + } + + offset = btrfs_find_space_for_alloc(cache, 0, SZ_1M, 0, + &max_extent_size); + if (offset != (SZ_128M - 768 * SZ_1K)) { + test_err( + "failed to allocate 1Mb from space cache, returned offset is: %llu", + offset); + return -EINVAL; + } + + /* + * All that remains is 2 * sectorsize free space region + * in a bitmap. Confirm. + */ + ret = check_num_extents_and_bitmaps(cache, 1, 1); + if (ret) + return ret; + + if (cache->free_space_ctl->free_space != 2 * sectorsize) { + test_err("cache free space is not %u", 2 * sectorsize); + return -EINVAL; + } + + offset = btrfs_find_space_for_alloc(cache, + 0, 2 * sectorsize, 0, + &max_extent_size); + if (offset != SZ_32M) { + test_err("failed to allocate %u, offset: %llu", + 2 * sectorsize, offset); + return -EINVAL; + } + + ret = check_cache_empty(cache); + if (ret) + return ret; + + cache->free_space_ctl->op = orig_free_space_ops; + btrfs_remove_free_space_cache(cache); + + return 0; +} + +static bool bytes_index_use_bitmap(struct btrfs_free_space_ctl *ctl, + struct btrfs_free_space *info) +{ + return true; +} + +static int test_bytes_index(struct btrfs_block_group *cache, u32 sectorsize) +{ + const struct btrfs_free_space_op test_free_space_ops = { + .use_bitmap = bytes_index_use_bitmap, + }; + const struct btrfs_free_space_op *orig_free_space_ops; + struct btrfs_free_space_ctl *ctl = cache->free_space_ctl; + struct btrfs_free_space *entry; + struct rb_node *node; + u64 offset, max_extent_size, bytes; + int ret, i; + + test_msg("running bytes index tests"); + + /* First just validate that it does everything in order. */ + offset = 0; + for (i = 0; i < 10; i++) { + bytes = (i + 1) * SZ_1M; + ret = test_add_free_space_entry(cache, offset, bytes, 0); + if (ret) { + test_err("couldn't add extent entry %d\n", ret); + return ret; + } + offset += bytes + sectorsize; + } + + for (node = rb_first_cached(&ctl->free_space_bytes), i = 9; node; + node = rb_next(node), i--) { + entry = rb_entry(node, struct btrfs_free_space, bytes_index); + bytes = (i + 1) * SZ_1M; + if (entry->bytes != bytes) { + test_err("invalid bytes index order, found %llu expected %llu", + entry->bytes, bytes); + return -EINVAL; + } + } + + /* Now validate bitmaps do the correct thing. */ + btrfs_remove_free_space_cache(cache); + for (i = 0; i < 2; i++) { + offset = i * BITS_PER_BITMAP * sectorsize; + bytes = (i + 1) * SZ_1M; + ret = test_add_free_space_entry(cache, offset, bytes, 1); + if (ret) { + test_err("couldn't add bitmap entry"); + return ret; + } + } + + for (node = rb_first_cached(&ctl->free_space_bytes), i = 1; node; + node = rb_next(node), i--) { + entry = rb_entry(node, struct btrfs_free_space, bytes_index); + bytes = (i + 1) * SZ_1M; + if (entry->bytes != bytes) { + test_err("invalid bytes index order, found %llu expected %llu", + entry->bytes, bytes); + return -EINVAL; + } + } + + /* Now validate bitmaps with different ->max_extent_size. */ + btrfs_remove_free_space_cache(cache); + orig_free_space_ops = cache->free_space_ctl->op; + cache->free_space_ctl->op = &test_free_space_ops; + + ret = test_add_free_space_entry(cache, 0, sectorsize, 1); + if (ret) { + test_err("couldn't add bitmap entry"); + return ret; + } + + offset = BITS_PER_BITMAP * sectorsize; + ret = test_add_free_space_entry(cache, offset, sectorsize, 1); + if (ret) { + test_err("couldn't add bitmap_entry"); + return ret; + } + + /* + * Now set a bunch of sectorsize extents in the first entry so it's + * ->bytes is large. + */ + for (i = 2; i < 20; i += 2) { + offset = sectorsize * i; + ret = btrfs_add_free_space(cache, offset, sectorsize); + if (ret) { + test_err("error populating sparse bitmap %d", ret); + return ret; + } + } + + /* + * Now set a contiguous extent in the second bitmap so its + * ->max_extent_size is larger than the first bitmaps. + */ + offset = (BITS_PER_BITMAP * sectorsize) + sectorsize; + ret = btrfs_add_free_space(cache, offset, sectorsize); + if (ret) { + test_err("error adding contiguous extent %d", ret); + return ret; + } + + /* + * Since we don't set ->max_extent_size unless we search everything + * should be indexed on bytes. + */ + entry = rb_entry(rb_first_cached(&ctl->free_space_bytes), + struct btrfs_free_space, bytes_index); + if (entry->bytes != (10 * sectorsize)) { + test_err("error, wrong entry in the first slot in bytes_index"); + return -EINVAL; + } + + max_extent_size = 0; + offset = btrfs_find_space_for_alloc(cache, cache->start, sectorsize * 3, + 0, &max_extent_size); + if (offset != 0) { + test_err("found space to alloc even though we don't have enough space"); + return -EINVAL; + } + + if (max_extent_size != (2 * sectorsize)) { + test_err("got the wrong max_extent size %llu expected %llu", + max_extent_size, (unsigned long long)(2 * sectorsize)); + return -EINVAL; + } + + /* + * The search should have re-arranged the bytes index to use the + * ->max_extent_size, validate it's now what we expect it to be. + */ + entry = rb_entry(rb_first_cached(&ctl->free_space_bytes), + struct btrfs_free_space, bytes_index); + if (entry->bytes != (2 * sectorsize)) { + test_err("error, the bytes index wasn't recalculated properly"); + return -EINVAL; + } + + /* Add another sectorsize to re-arrange the tree back to ->bytes. */ + offset = (BITS_PER_BITMAP * sectorsize) - sectorsize; + ret = btrfs_add_free_space(cache, offset, sectorsize); + if (ret) { + test_err("error adding extent to the sparse entry %d", ret); + return ret; + } + + entry = rb_entry(rb_first_cached(&ctl->free_space_bytes), + struct btrfs_free_space, bytes_index); + if (entry->bytes != (11 * sectorsize)) { + test_err("error, wrong entry in the first slot in bytes_index"); + return -EINVAL; + } + + /* + * Now make sure we find our correct entry after searching that will + * result in a re-arranging of the tree. + */ + max_extent_size = 0; + offset = btrfs_find_space_for_alloc(cache, cache->start, sectorsize * 2, + 0, &max_extent_size); + if (offset != (BITS_PER_BITMAP * sectorsize)) { + test_err("error, found %llu instead of %llu for our alloc", + offset, + (unsigned long long)(BITS_PER_BITMAP * sectorsize)); + return -EINVAL; + } + + cache->free_space_ctl->op = orig_free_space_ops; + btrfs_remove_free_space_cache(cache); + return 0; +} + +int btrfs_test_free_space_cache(u32 sectorsize, u32 nodesize) +{ + struct btrfs_fs_info *fs_info; + struct btrfs_block_group *cache; + struct btrfs_root *root = NULL; + int ret = -ENOMEM; + + test_msg("running btrfs free space cache tests"); + fs_info = btrfs_alloc_dummy_fs_info(nodesize, sectorsize); + if (!fs_info) { + test_std_err(TEST_ALLOC_FS_INFO); + return -ENOMEM; + } + + /* + * For ppc64 (with 64k page size), bytes per bitmap might be + * larger than 1G. To make bitmap test available in ppc64, + * alloc dummy block group whose size cross bitmaps. + */ + cache = btrfs_alloc_dummy_block_group(fs_info, + BITS_PER_BITMAP * sectorsize + PAGE_SIZE); + if (!cache) { + test_std_err(TEST_ALLOC_BLOCK_GROUP); + btrfs_free_dummy_fs_info(fs_info); + return 0; + } + + root = btrfs_alloc_dummy_root(fs_info); + if (IS_ERR(root)) { + test_std_err(TEST_ALLOC_ROOT); + ret = PTR_ERR(root); + goto out; + } + + root->root_key.objectid = BTRFS_EXTENT_TREE_OBJECTID; + root->root_key.type = BTRFS_ROOT_ITEM_KEY; + root->root_key.offset = 0; + btrfs_global_root_insert(root); + + ret = test_extents(cache); + if (ret) + goto out; + ret = test_bitmaps(cache, sectorsize); + if (ret) + goto out; + ret = test_bitmaps_and_extents(cache, sectorsize); + if (ret) + goto out; + + ret = test_steal_space_from_bitmap_to_extent(cache, sectorsize); + if (ret) + goto out; + ret = test_bytes_index(cache, sectorsize); +out: + btrfs_free_dummy_block_group(cache); + btrfs_free_dummy_root(root); + btrfs_free_dummy_fs_info(fs_info); + return ret; +} |