diff options
Diffstat (limited to 'fs/ntfs/logfile.h')
| -rw-r--r-- | fs/ntfs/logfile.h | 295 |
1 files changed, 0 insertions, 295 deletions
diff --git a/fs/ntfs/logfile.h b/fs/ntfs/logfile.h deleted file mode 100644 index 429d4909cc..0000000000 --- a/fs/ntfs/logfile.h +++ /dev/null @@ -1,295 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * logfile.h - Defines for NTFS kernel journal ($LogFile) handling. Part of - * the Linux-NTFS project. - * - * Copyright (c) 2000-2005 Anton Altaparmakov - */ - -#ifndef _LINUX_NTFS_LOGFILE_H -#define _LINUX_NTFS_LOGFILE_H - -#ifdef NTFS_RW - -#include <linux/fs.h> - -#include "types.h" -#include "endian.h" -#include "layout.h" - -/* - * Journal ($LogFile) organization: - * - * Two restart areas present in the first two pages (restart pages, one restart - * area in each page). When the volume is dismounted they should be identical, - * except for the update sequence array which usually has a different update - * sequence number. - * - * These are followed by log records organized in pages headed by a log record - * header going up to log file size. Not all pages contain log records when a - * volume is first formatted, but as the volume ages, all records will be used. - * When the log file fills up, the records at the beginning are purged (by - * modifying the oldest_lsn to a higher value presumably) and writing begins - * at the beginning of the file. Effectively, the log file is viewed as a - * circular entity. - * - * NOTE: Windows NT, 2000, and XP all use log file version 1.1 but they accept - * versions <= 1.x, including 0.-1. (Yes, that is a minus one in there!) We - * probably only want to support 1.1 as this seems to be the current version - * and we don't know how that differs from the older versions. The only - * exception is if the journal is clean as marked by the two restart pages - * then it doesn't matter whether we are on an earlier version. We can just - * reinitialize the logfile and start again with version 1.1. - */ - -/* Some $LogFile related constants. */ -#define MaxLogFileSize 0x100000000ULL -#define DefaultLogPageSize 4096 -#define MinLogRecordPages 48 - -/* - * Log file restart page header (begins the restart area). - */ -typedef struct { -/*Ofs*/ -/* 0 NTFS_RECORD; -- Unfolded here as gcc doesn't like unnamed structs. */ -/* 0*/ NTFS_RECORD_TYPE magic; /* The magic is "RSTR". */ -/* 4*/ le16 usa_ofs; /* See NTFS_RECORD definition in layout.h. - When creating, set this to be immediately - after this header structure (without any - alignment). */ -/* 6*/ le16 usa_count; /* See NTFS_RECORD definition in layout.h. */ - -/* 8*/ leLSN chkdsk_lsn; /* The last log file sequence number found by - chkdsk. Only used when the magic is changed - to "CHKD". Otherwise this is zero. */ -/* 16*/ le32 system_page_size; /* Byte size of system pages when the log file - was created, has to be >= 512 and a power of - 2. Use this to calculate the required size - of the usa (usa_count) and add it to usa_ofs. - Then verify that the result is less than the - value of the restart_area_offset. */ -/* 20*/ le32 log_page_size; /* Byte size of log file pages, has to be >= - 512 and a power of 2. The default is 4096 - and is used when the system page size is - between 4096 and 8192. Otherwise this is - set to the system page size instead. */ -/* 24*/ le16 restart_area_offset;/* Byte offset from the start of this header to - the RESTART_AREA. Value has to be aligned - to 8-byte boundary. When creating, set this - to be after the usa. */ -/* 26*/ sle16 minor_ver; /* Log file minor version. Only check if major - version is 1. */ -/* 28*/ sle16 major_ver; /* Log file major version. We only support - version 1.1. */ -/* sizeof() = 30 (0x1e) bytes */ -} __attribute__ ((__packed__)) RESTART_PAGE_HEADER; - -/* - * Constant for the log client indices meaning that there are no client records - * in this particular client array. Also inside the client records themselves, - * this means that there are no client records preceding or following this one. - */ -#define LOGFILE_NO_CLIENT cpu_to_le16(0xffff) -#define LOGFILE_NO_CLIENT_CPU 0xffff - -/* - * These are the so far known RESTART_AREA_* flags (16-bit) which contain - * information about the log file in which they are present. - */ -enum { - RESTART_VOLUME_IS_CLEAN = cpu_to_le16(0x0002), - RESTART_SPACE_FILLER = cpu_to_le16(0xffff), /* gcc: Force enum bit width to 16. */ -} __attribute__ ((__packed__)); - -typedef le16 RESTART_AREA_FLAGS; - -/* - * Log file restart area record. The offset of this record is found by adding - * the offset of the RESTART_PAGE_HEADER to the restart_area_offset value found - * in it. See notes at restart_area_offset above. - */ -typedef struct { -/*Ofs*/ -/* 0*/ leLSN current_lsn; /* The current, i.e. last LSN inside the log - when the restart area was last written. - This happens often but what is the interval? - Is it just fixed time or is it every time a - check point is written or somethine else? - On create set to 0. */ -/* 8*/ le16 log_clients; /* Number of log client records in the array of - log client records which follows this - restart area. Must be 1. */ -/* 10*/ le16 client_free_list; /* The index of the first free log client record - in the array of log client records. - LOGFILE_NO_CLIENT means that there are no - free log client records in the array. - If != LOGFILE_NO_CLIENT, check that - log_clients > client_free_list. On Win2k - and presumably earlier, on a clean volume - this is != LOGFILE_NO_CLIENT, and it should - be 0, i.e. the first (and only) client - record is free and thus the logfile is - closed and hence clean. A dirty volume - would have left the logfile open and hence - this would be LOGFILE_NO_CLIENT. On WinXP - and presumably later, the logfile is always - open, even on clean shutdown so this should - always be LOGFILE_NO_CLIENT. */ -/* 12*/ le16 client_in_use_list;/* The index of the first in-use log client - record in the array of log client records. - LOGFILE_NO_CLIENT means that there are no - in-use log client records in the array. If - != LOGFILE_NO_CLIENT check that log_clients - > client_in_use_list. On Win2k and - presumably earlier, on a clean volume this - is LOGFILE_NO_CLIENT, i.e. there are no - client records in use and thus the logfile - is closed and hence clean. A dirty volume - would have left the logfile open and hence - this would be != LOGFILE_NO_CLIENT, and it - should be 0, i.e. the first (and only) - client record is in use. On WinXP and - presumably later, the logfile is always - open, even on clean shutdown so this should - always be 0. */ -/* 14*/ RESTART_AREA_FLAGS flags;/* Flags modifying LFS behaviour. On Win2k - and presumably earlier this is always 0. On - WinXP and presumably later, if the logfile - was shutdown cleanly, the second bit, - RESTART_VOLUME_IS_CLEAN, is set. This bit - is cleared when the volume is mounted by - WinXP and set when the volume is dismounted, - thus if the logfile is dirty, this bit is - clear. Thus we don't need to check the - Windows version to determine if the logfile - is clean. Instead if the logfile is closed, - we know it must be clean. If it is open and - this bit is set, we also know it must be - clean. If on the other hand the logfile is - open and this bit is clear, we can be almost - certain that the logfile is dirty. */ -/* 16*/ le32 seq_number_bits; /* How many bits to use for the sequence - number. This is calculated as 67 - the - number of bits required to store the logfile - size in bytes and this can be used in with - the specified file_size as a consistency - check. */ -/* 20*/ le16 restart_area_length;/* Length of the restart area including the - client array. Following checks required if - version matches. Otherwise, skip them. - restart_area_offset + restart_area_length - has to be <= system_page_size. Also, - restart_area_length has to be >= - client_array_offset + (log_clients * - sizeof(log client record)). */ -/* 22*/ le16 client_array_offset;/* Offset from the start of this record to - the first log client record if versions are - matched. When creating, set this to be - after this restart area structure, aligned - to 8-bytes boundary. If the versions do not - match, this is ignored and the offset is - assumed to be (sizeof(RESTART_AREA) + 7) & - ~7, i.e. rounded up to first 8-byte - boundary. Either way, client_array_offset - has to be aligned to an 8-byte boundary. - Also, restart_area_offset + - client_array_offset has to be <= 510. - Finally, client_array_offset + (log_clients - * sizeof(log client record)) has to be <= - system_page_size. On Win2k and presumably - earlier, this is 0x30, i.e. immediately - following this record. On WinXP and - presumably later, this is 0x40, i.e. there - are 16 extra bytes between this record and - the client array. This probably means that - the RESTART_AREA record is actually bigger - in WinXP and later. */ -/* 24*/ sle64 file_size; /* Usable byte size of the log file. If the - restart_area_offset + the offset of the - file_size are > 510 then corruption has - occurred. This is the very first check when - starting with the restart_area as if it - fails it means that some of the above values - will be corrupted by the multi sector - transfer protection. The file_size has to - be rounded down to be a multiple of the - log_page_size in the RESTART_PAGE_HEADER and - then it has to be at least big enough to - store the two restart pages and 48 (0x30) - log record pages. */ -/* 32*/ le32 last_lsn_data_length;/* Length of data of last LSN, not including - the log record header. On create set to - 0. */ -/* 36*/ le16 log_record_header_length;/* Byte size of the log record header. - If the version matches then check that the - value of log_record_header_length is a - multiple of 8, i.e. - (log_record_header_length + 7) & ~7 == - log_record_header_length. When creating set - it to sizeof(LOG_RECORD_HEADER), aligned to - 8 bytes. */ -/* 38*/ le16 log_page_data_offset;/* Offset to the start of data in a log record - page. Must be a multiple of 8. On create - set it to immediately after the update - sequence array of the log record page. */ -/* 40*/ le32 restart_log_open_count;/* A counter that gets incremented every - time the logfile is restarted which happens - at mount time when the logfile is opened. - When creating set to a random value. Win2k - sets it to the low 32 bits of the current - system time in NTFS format (see time.h). */ -/* 44*/ le32 reserved; /* Reserved/alignment to 8-byte boundary. */ -/* sizeof() = 48 (0x30) bytes */ -} __attribute__ ((__packed__)) RESTART_AREA; - -/* - * Log client record. The offset of this record is found by adding the offset - * of the RESTART_AREA to the client_array_offset value found in it. - */ -typedef struct { -/*Ofs*/ -/* 0*/ leLSN oldest_lsn; /* Oldest LSN needed by this client. On create - set to 0. */ -/* 8*/ leLSN client_restart_lsn;/* LSN at which this client needs to restart - the volume, i.e. the current position within - the log file. At present, if clean this - should = current_lsn in restart area but it - probably also = current_lsn when dirty most - of the time. At create set to 0. */ -/* 16*/ le16 prev_client; /* The offset to the previous log client record - in the array of log client records. - LOGFILE_NO_CLIENT means there is no previous - client record, i.e. this is the first one. - This is always LOGFILE_NO_CLIENT. */ -/* 18*/ le16 next_client; /* The offset to the next log client record in - the array of log client records. - LOGFILE_NO_CLIENT means there are no next - client records, i.e. this is the last one. - This is always LOGFILE_NO_CLIENT. */ -/* 20*/ le16 seq_number; /* On Win2k and presumably earlier, this is set - to zero every time the logfile is restarted - and it is incremented when the logfile is - closed at dismount time. Thus it is 0 when - dirty and 1 when clean. On WinXP and - presumably later, this is always 0. */ -/* 22*/ u8 reserved[6]; /* Reserved/alignment. */ -/* 28*/ le32 client_name_length;/* Length of client name in bytes. Should - always be 8. */ -/* 32*/ ntfschar client_name[64];/* Name of the client in Unicode. Should - always be "NTFS" with the remaining bytes - set to 0. */ -/* sizeof() = 160 (0xa0) bytes */ -} __attribute__ ((__packed__)) LOG_CLIENT_RECORD; - -extern bool ntfs_check_logfile(struct inode *log_vi, - RESTART_PAGE_HEADER **rp); - -extern bool ntfs_is_logfile_clean(struct inode *log_vi, - const RESTART_PAGE_HEADER *rp); - -extern bool ntfs_empty_logfile(struct inode *log_vi); - -#endif /* NTFS_RW */ - -#endif /* _LINUX_NTFS_LOGFILE_H */ |