diff options
Diffstat (limited to 'include/drm/display/drm_dp_helper.h')
| -rw-r--r-- | include/drm/display/drm_dp_helper.h | 51 |
1 files changed, 49 insertions, 2 deletions
diff --git a/include/drm/display/drm_dp_helper.h b/include/drm/display/drm_dp_helper.h index a62fcd051d..8bed890eec 100644 --- a/include/drm/display/drm_dp_helper.h +++ b/include/drm/display/drm_dp_helper.h @@ -98,9 +98,39 @@ struct drm_dp_vsc_sdp { enum dp_content_type content_type; }; +/** + * struct drm_dp_as_sdp - drm DP Adaptive Sync SDP + * + * This structure represents a DP AS SDP of drm + * It is based on DP 2.1 spec [Table 2-126: Adaptive-Sync SDP Header Bytes] and + * [Table 2-127: Adaptive-Sync SDP Payload for DB0 through DB8] + * + * @sdp_type: Secondary-data packet type + * @revision: Revision Number + * @length: Number of valid data bytes + * @vtotal: Minimum Vertical Vtotal + * @target_rr: Target Refresh + * @duration_incr_ms: Successive frame duration increase + * @duration_decr_ms: Successive frame duration decrease + * @operation_mode: Adaptive Sync Operation Mode + */ +struct drm_dp_as_sdp { + unsigned char sdp_type; + unsigned char revision; + unsigned char length; + int vtotal; + int target_rr; + int duration_incr_ms; + int duration_decr_ms; + enum operation_mode mode; +}; + +void drm_dp_as_sdp_log(struct drm_printer *p, + const struct drm_dp_as_sdp *as_sdp); void drm_dp_vsc_sdp_log(struct drm_printer *p, const struct drm_dp_vsc_sdp *vsc); bool drm_dp_vsc_sdp_supported(struct drm_dp_aux *aux, const u8 dpcd[DP_RECEIVER_CAP_SIZE]); +bool drm_dp_as_sdp_supported(struct drm_dp_aux *aux, const u8 dpcd[DP_RECEIVER_CAP_SIZE]); int drm_dp_psr_setup_time(const u8 psr_cap[EDP_PSR_RECEIVER_CAP_SIZE]); @@ -222,6 +252,12 @@ drm_dp_channel_coding_supported(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) } static inline bool +drm_dp_128b132b_supported(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) +{ + return dpcd[DP_MAIN_LINK_CHANNEL_CODING] & DP_CAP_ANSI_128B132B; +} + +static inline bool drm_dp_alternate_scrambler_reset_cap(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) { return dpcd[DP_EDP_CONFIGURATION_CAP] & @@ -422,7 +458,18 @@ struct drm_dp_aux { * @wait_hpd_asserted: wait for HPD to be asserted * * This is mainly useful for eDP panels drivers to wait for an eDP - * panel to finish powering on. This is an optional function. + * panel to finish powering on. It is optional for DP AUX controllers + * to implement this function. It is required for DP AUX endpoints + * (panel drivers) to call this function after powering up but before + * doing AUX transfers unless the DP AUX endpoint driver knows that + * we're not using the AUX controller's HPD. One example of the panel + * driver not needing to call this is if HPD is hooked up to a GPIO + * that the panel driver can read directly. + * + * If a DP AUX controller does not implement this function then it + * may still support eDP panels that use the AUX controller's built-in + * HPD signal by implementing a long wait for HPD in the transfer() + * callback, though this is deprecated. * * This function will efficiently wait for the HPD signal to be * asserted. The `wait_us` parameter that is passed in says that we @@ -722,7 +769,7 @@ static inline int drm_panel_dp_aux_backlight(struct drm_panel *panel, #endif -#ifdef CONFIG_DRM_DP_CEC +#ifdef CONFIG_DRM_DISPLAY_DP_AUX_CEC void drm_dp_cec_irq(struct drm_dp_aux *aux); void drm_dp_cec_register_connector(struct drm_dp_aux *aux, struct drm_connector *connector); |