diff options
Diffstat (limited to 'include/drm/drm_modes.h')
| -rw-r--r-- | include/drm/drm_modes.h | 573 |
1 files changed, 573 insertions, 0 deletions
diff --git a/include/drm/drm_modes.h b/include/drm/drm_modes.h new file mode 100644 index 0000000000..c613f0abe9 --- /dev/null +++ b/include/drm/drm_modes.h @@ -0,0 +1,573 @@ +/* + * Copyright © 2006 Keith Packard + * Copyright © 2007-2008 Dave Airlie + * Copyright © 2007-2008 Intel Corporation + * Jesse Barnes <jesse.barnes@intel.com> + * Copyright © 2014 Intel Corporation + * Daniel Vetter <daniel.vetter@ffwll.ch> + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#ifndef __DRM_MODES_H__ +#define __DRM_MODES_H__ + +#include <linux/hdmi.h> + +#include <drm/drm_mode_object.h> +#include <drm/drm_connector.h> + +struct videomode; + +/* + * Note on terminology: here, for brevity and convenience, we refer to connector + * control chips as 'CRTCs'. They can control any type of connector, VGA, LVDS, + * DVI, etc. And 'screen' refers to the whole of the visible display, which + * may span multiple monitors (and therefore multiple CRTC and connector + * structures). + */ + +/** + * enum drm_mode_status - hardware support status of a mode + * @MODE_OK: Mode OK + * @MODE_HSYNC: hsync out of range + * @MODE_VSYNC: vsync out of range + * @MODE_H_ILLEGAL: mode has illegal horizontal timings + * @MODE_V_ILLEGAL: mode has illegal vertical timings + * @MODE_BAD_WIDTH: requires an unsupported linepitch + * @MODE_NOMODE: no mode with a matching name + * @MODE_NO_INTERLACE: interlaced mode not supported + * @MODE_NO_DBLESCAN: doublescan mode not supported + * @MODE_NO_VSCAN: multiscan mode not supported + * @MODE_MEM: insufficient video memory + * @MODE_VIRTUAL_X: mode width too large for specified virtual size + * @MODE_VIRTUAL_Y: mode height too large for specified virtual size + * @MODE_MEM_VIRT: insufficient video memory given virtual size + * @MODE_NOCLOCK: no fixed clock available + * @MODE_CLOCK_HIGH: clock required is too high + * @MODE_CLOCK_LOW: clock required is too low + * @MODE_CLOCK_RANGE: clock/mode isn't in a ClockRange + * @MODE_BAD_HVALUE: horizontal timing was out of range + * @MODE_BAD_VVALUE: vertical timing was out of range + * @MODE_BAD_VSCAN: VScan value out of range + * @MODE_HSYNC_NARROW: horizontal sync too narrow + * @MODE_HSYNC_WIDE: horizontal sync too wide + * @MODE_HBLANK_NARROW: horizontal blanking too narrow + * @MODE_HBLANK_WIDE: horizontal blanking too wide + * @MODE_VSYNC_NARROW: vertical sync too narrow + * @MODE_VSYNC_WIDE: vertical sync too wide + * @MODE_VBLANK_NARROW: vertical blanking too narrow + * @MODE_VBLANK_WIDE: vertical blanking too wide + * @MODE_PANEL: exceeds panel dimensions + * @MODE_INTERLACE_WIDTH: width too large for interlaced mode + * @MODE_ONE_WIDTH: only one width is supported + * @MODE_ONE_HEIGHT: only one height is supported + * @MODE_ONE_SIZE: only one resolution is supported + * @MODE_NO_REDUCED: monitor doesn't accept reduced blanking + * @MODE_NO_STEREO: stereo modes not supported + * @MODE_NO_420: ycbcr 420 modes not supported + * @MODE_STALE: mode has become stale + * @MODE_BAD: unspecified reason + * @MODE_ERROR: error condition + * + * This enum is used to filter out modes not supported by the driver/hardware + * combination. + */ +enum drm_mode_status { + MODE_OK = 0, + MODE_HSYNC, + MODE_VSYNC, + MODE_H_ILLEGAL, + MODE_V_ILLEGAL, + MODE_BAD_WIDTH, + MODE_NOMODE, + MODE_NO_INTERLACE, + MODE_NO_DBLESCAN, + MODE_NO_VSCAN, + MODE_MEM, + MODE_VIRTUAL_X, + MODE_VIRTUAL_Y, + MODE_MEM_VIRT, + MODE_NOCLOCK, + MODE_CLOCK_HIGH, + MODE_CLOCK_LOW, + MODE_CLOCK_RANGE, + MODE_BAD_HVALUE, + MODE_BAD_VVALUE, + MODE_BAD_VSCAN, + MODE_HSYNC_NARROW, + MODE_HSYNC_WIDE, + MODE_HBLANK_NARROW, + MODE_HBLANK_WIDE, + MODE_VSYNC_NARROW, + MODE_VSYNC_WIDE, + MODE_VBLANK_NARROW, + MODE_VBLANK_WIDE, + MODE_PANEL, + MODE_INTERLACE_WIDTH, + MODE_ONE_WIDTH, + MODE_ONE_HEIGHT, + MODE_ONE_SIZE, + MODE_NO_REDUCED, + MODE_NO_STEREO, + MODE_NO_420, + MODE_STALE = -3, + MODE_BAD = -2, + MODE_ERROR = -1 +}; + +#define DRM_MODE(nm, t, c, hd, hss, hse, ht, hsk, vd, vss, vse, vt, vs, f) \ + .name = nm, .status = 0, .type = (t), .clock = (c), \ + .hdisplay = (hd), .hsync_start = (hss), .hsync_end = (hse), \ + .htotal = (ht), .hskew = (hsk), .vdisplay = (vd), \ + .vsync_start = (vss), .vsync_end = (vse), .vtotal = (vt), \ + .vscan = (vs), .flags = (f) + +/** + * DRM_MODE_RES_MM - Calculates the display size from resolution and DPI + * @res: The resolution in pixel + * @dpi: The number of dots per inch + */ +#define DRM_MODE_RES_MM(res, dpi) \ + (((res) * 254ul) / ((dpi) * 10ul)) + +#define __DRM_MODE_INIT(pix, hd, vd, hd_mm, vd_mm) \ + .type = DRM_MODE_TYPE_DRIVER, .clock = (pix), \ + .hdisplay = (hd), .hsync_start = (hd), .hsync_end = (hd), \ + .htotal = (hd), .vdisplay = (vd), .vsync_start = (vd), \ + .vsync_end = (vd), .vtotal = (vd), .width_mm = (hd_mm), \ + .height_mm = (vd_mm) + +/** + * DRM_MODE_INIT - Initialize display mode + * @hz: Vertical refresh rate in Hertz + * @hd: Horizontal resolution, width + * @vd: Vertical resolution, height + * @hd_mm: Display width in millimeters + * @vd_mm: Display height in millimeters + * + * This macro initializes a &drm_display_mode that contains information about + * refresh rate, resolution and physical size. + */ +#define DRM_MODE_INIT(hz, hd, vd, hd_mm, vd_mm) \ + __DRM_MODE_INIT((hd) * (vd) * (hz) / 1000 /* kHz */, hd, vd, hd_mm, vd_mm) + +/** + * DRM_SIMPLE_MODE - Simple display mode + * @hd: Horizontal resolution, width + * @vd: Vertical resolution, height + * @hd_mm: Display width in millimeters + * @vd_mm: Display height in millimeters + * + * This macro initializes a &drm_display_mode that only contains info about + * resolution and physical size. + */ +#define DRM_SIMPLE_MODE(hd, vd, hd_mm, vd_mm) \ + __DRM_MODE_INIT(1 /* pass validation */, hd, vd, hd_mm, vd_mm) + +#define CRTC_INTERLACE_HALVE_V (1 << 0) /* halve V values for interlacing */ +#define CRTC_STEREO_DOUBLE (1 << 1) /* adjust timings for stereo modes */ +#define CRTC_NO_DBLSCAN (1 << 2) /* don't adjust doublescan */ +#define CRTC_NO_VSCAN (1 << 3) /* don't adjust doublescan */ +#define CRTC_STEREO_DOUBLE_ONLY (CRTC_STEREO_DOUBLE | CRTC_NO_DBLSCAN | CRTC_NO_VSCAN) + +#define DRM_MODE_FLAG_3D_MAX DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF + +#define DRM_MODE_MATCH_TIMINGS (1 << 0) +#define DRM_MODE_MATCH_CLOCK (1 << 1) +#define DRM_MODE_MATCH_FLAGS (1 << 2) +#define DRM_MODE_MATCH_3D_FLAGS (1 << 3) +#define DRM_MODE_MATCH_ASPECT_RATIO (1 << 4) + +/** + * struct drm_display_mode - DRM kernel-internal display mode structure + * @hdisplay: horizontal display size + * @hsync_start: horizontal sync start + * @hsync_end: horizontal sync end + * @htotal: horizontal total size + * @hskew: horizontal skew?! + * @vdisplay: vertical display size + * @vsync_start: vertical sync start + * @vsync_end: vertical sync end + * @vtotal: vertical total size + * @vscan: vertical scan?! + * @crtc_hdisplay: hardware mode horizontal display size + * @crtc_hblank_start: hardware mode horizontal blank start + * @crtc_hblank_end: hardware mode horizontal blank end + * @crtc_hsync_start: hardware mode horizontal sync start + * @crtc_hsync_end: hardware mode horizontal sync end + * @crtc_htotal: hardware mode horizontal total size + * @crtc_hskew: hardware mode horizontal skew?! + * @crtc_vdisplay: hardware mode vertical display size + * @crtc_vblank_start: hardware mode vertical blank start + * @crtc_vblank_end: hardware mode vertical blank end + * @crtc_vsync_start: hardware mode vertical sync start + * @crtc_vsync_end: hardware mode vertical sync end + * @crtc_vtotal: hardware mode vertical total size + * + * This is the kernel API display mode information structure. For the + * user-space version see struct drm_mode_modeinfo. + * + * The horizontal and vertical timings are defined per the following diagram. + * + * :: + * + * + * Active Front Sync Back + * Region Porch Porch + * <-----------------------><----------------><-------------><--------------> + * //////////////////////| + * ////////////////////// | + * ////////////////////// |.................. ................ + * _______________ + * <----- [hv]display -----> + * <------------- [hv]sync_start ------------> + * <--------------------- [hv]sync_end ---------------------> + * <-------------------------------- [hv]total ----------------------------->* + * + * This structure contains two copies of timings. First are the plain timings, + * which specify the logical mode, as it would be for a progressive 1:1 scanout + * at the refresh rate userspace can observe through vblank timestamps. Then + * there's the hardware timings, which are corrected for interlacing, + * double-clocking and similar things. They are provided as a convenience, and + * can be appropriately computed using drm_mode_set_crtcinfo(). + * + * For printing you can use %DRM_MODE_FMT and DRM_MODE_ARG(). + */ +struct drm_display_mode { + /** + * @clock: + * + * Pixel clock in kHz. + */ + int clock; /* in kHz */ + u16 hdisplay; + u16 hsync_start; + u16 hsync_end; + u16 htotal; + u16 hskew; + u16 vdisplay; + u16 vsync_start; + u16 vsync_end; + u16 vtotal; + u16 vscan; + /** + * @flags: + * + * Sync and timing flags: + * + * - DRM_MODE_FLAG_PHSYNC: horizontal sync is active high. + * - DRM_MODE_FLAG_NHSYNC: horizontal sync is active low. + * - DRM_MODE_FLAG_PVSYNC: vertical sync is active high. + * - DRM_MODE_FLAG_NVSYNC: vertical sync is active low. + * - DRM_MODE_FLAG_INTERLACE: mode is interlaced. + * - DRM_MODE_FLAG_DBLSCAN: mode uses doublescan. + * - DRM_MODE_FLAG_CSYNC: mode uses composite sync. + * - DRM_MODE_FLAG_PCSYNC: composite sync is active high. + * - DRM_MODE_FLAG_NCSYNC: composite sync is active low. + * - DRM_MODE_FLAG_HSKEW: hskew provided (not used?). + * - DRM_MODE_FLAG_BCAST: <deprecated> + * - DRM_MODE_FLAG_PIXMUX: <deprecated> + * - DRM_MODE_FLAG_DBLCLK: double-clocked mode. + * - DRM_MODE_FLAG_CLKDIV2: half-clocked mode. + * + * Additionally there's flags to specify how 3D modes are packed: + * + * - DRM_MODE_FLAG_3D_NONE: normal, non-3D mode. + * - DRM_MODE_FLAG_3D_FRAME_PACKING: 2 full frames for left and right. + * - DRM_MODE_FLAG_3D_FIELD_ALTERNATIVE: interleaved like fields. + * - DRM_MODE_FLAG_3D_LINE_ALTERNATIVE: interleaved lines. + * - DRM_MODE_FLAG_3D_SIDE_BY_SIDE_FULL: side-by-side full frames. + * - DRM_MODE_FLAG_3D_L_DEPTH: ? + * - DRM_MODE_FLAG_3D_L_DEPTH_GFX_GFX_DEPTH: ? + * - DRM_MODE_FLAG_3D_TOP_AND_BOTTOM: frame split into top and bottom + * parts. + * - DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF: frame split into left and + * right parts. + */ + u32 flags; + + /** + * @crtc_clock: + * + * Actual pixel or dot clock in the hardware. This differs from the + * logical @clock when e.g. using interlacing, double-clocking, stereo + * modes or other fancy stuff that changes the timings and signals + * actually sent over the wire. + * + * This is again in kHz. + * + * Note that with digital outputs like HDMI or DP there's usually a + * massive confusion between the dot clock and the signal clock at the + * bit encoding level. Especially when a 8b/10b encoding is used and the + * difference is exactly a factor of 10. + */ + int crtc_clock; + u16 crtc_hdisplay; + u16 crtc_hblank_start; + u16 crtc_hblank_end; + u16 crtc_hsync_start; + u16 crtc_hsync_end; + u16 crtc_htotal; + u16 crtc_hskew; + u16 crtc_vdisplay; + u16 crtc_vblank_start; + u16 crtc_vblank_end; + u16 crtc_vsync_start; + u16 crtc_vsync_end; + u16 crtc_vtotal; + + /** + * @width_mm: + * + * Addressable size of the output in mm, projectors should set this to + * 0. + */ + u16 width_mm; + + /** + * @height_mm: + * + * Addressable size of the output in mm, projectors should set this to + * 0. + */ + u16 height_mm; + + /** + * @type: + * + * A bitmask of flags, mostly about the source of a mode. Possible flags + * are: + * + * - DRM_MODE_TYPE_PREFERRED: Preferred mode, usually the native + * resolution of an LCD panel. There should only be one preferred + * mode per connector at any given time. + * - DRM_MODE_TYPE_DRIVER: Mode created by the driver, which is all of + * them really. Drivers must set this bit for all modes they create + * and expose to userspace. + * - DRM_MODE_TYPE_USERDEF: Mode defined or selected via the kernel + * command line. + * + * Plus a big list of flags which shouldn't be used at all, but are + * still around since these flags are also used in the userspace ABI. + * We no longer accept modes with these types though: + * + * - DRM_MODE_TYPE_BUILTIN: Meant for hard-coded modes, unused. + * Use DRM_MODE_TYPE_DRIVER instead. + * - DRM_MODE_TYPE_DEFAULT: Again a leftover, use + * DRM_MODE_TYPE_PREFERRED instead. + * - DRM_MODE_TYPE_CLOCK_C and DRM_MODE_TYPE_CRTC_C: Define leftovers + * which are stuck around for hysterical raisins only. No one has an + * idea what they were meant for. Don't use. + */ + u8 type; + + /** + * @expose_to_userspace: + * + * Indicates whether the mode is to be exposed to the userspace. + * This is to maintain a set of exposed modes while preparing + * user-mode's list in drm_mode_getconnector ioctl. The purpose of + * this only lies in the ioctl function, and is not to be used + * outside the function. + */ + bool expose_to_userspace; + + /** + * @head: + * + * struct list_head for mode lists. + */ + struct list_head head; + + /** + * @name: + * + * Human-readable name of the mode, filled out with drm_mode_set_name(). + */ + char name[DRM_DISPLAY_MODE_LEN]; + + /** + * @status: + * + * Status of the mode, used to filter out modes not supported by the + * hardware. See enum &drm_mode_status. + */ + enum drm_mode_status status; + + /** + * @picture_aspect_ratio: + * + * Field for setting the HDMI picture aspect ratio of a mode. + */ + enum hdmi_picture_aspect picture_aspect_ratio; + +}; + +/** + * DRM_MODE_FMT - printf string for &struct drm_display_mode + */ +#define DRM_MODE_FMT "\"%s\": %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x" + +/** + * DRM_MODE_ARG - printf arguments for &struct drm_display_mode + * @m: display mode + */ +#define DRM_MODE_ARG(m) \ + (m)->name, drm_mode_vrefresh(m), (m)->clock, \ + (m)->hdisplay, (m)->hsync_start, (m)->hsync_end, (m)->htotal, \ + (m)->vdisplay, (m)->vsync_start, (m)->vsync_end, (m)->vtotal, \ + (m)->type, (m)->flags + +#define obj_to_mode(x) container_of(x, struct drm_display_mode, base) + +/** + * drm_mode_is_stereo - check for stereo mode flags + * @mode: drm_display_mode to check + * + * Returns: + * True if the mode is one of the stereo modes (like side-by-side), false if + * not. + */ +static inline bool drm_mode_is_stereo(const struct drm_display_mode *mode) +{ + return mode->flags & DRM_MODE_FLAG_3D_MASK; +} + +struct drm_connector; +struct drm_cmdline_mode; + +struct drm_display_mode *drm_mode_create(struct drm_device *dev); +void drm_mode_destroy(struct drm_device *dev, struct drm_display_mode *mode); +void drm_mode_convert_to_umode(struct drm_mode_modeinfo *out, + const struct drm_display_mode *in); +int drm_mode_convert_umode(struct drm_device *dev, + struct drm_display_mode *out, + const struct drm_mode_modeinfo *in); +void drm_mode_probed_add(struct drm_connector *connector, struct drm_display_mode *mode); +void drm_mode_debug_printmodeline(const struct drm_display_mode *mode); +bool drm_mode_is_420_only(const struct drm_display_info *display, + const struct drm_display_mode *mode); +bool drm_mode_is_420_also(const struct drm_display_info *display, + const struct drm_display_mode *mode); +bool drm_mode_is_420(const struct drm_display_info *display, + const struct drm_display_mode *mode); + +struct drm_display_mode *drm_analog_tv_mode(struct drm_device *dev, + enum drm_connector_tv_mode mode, + unsigned long pixel_clock_hz, + unsigned int hdisplay, + unsigned int vdisplay, + bool interlace); + +static inline struct drm_display_mode *drm_mode_analog_ntsc_480i(struct drm_device *dev) +{ + return drm_analog_tv_mode(dev, DRM_MODE_TV_MODE_NTSC, 13500000, 720, 480, true); +} + +static inline struct drm_display_mode *drm_mode_analog_pal_576i(struct drm_device *dev) +{ + return drm_analog_tv_mode(dev, DRM_MODE_TV_MODE_PAL, 13500000, 720, 576, true); +} + +struct drm_display_mode *drm_cvt_mode(struct drm_device *dev, + int hdisplay, int vdisplay, int vrefresh, + bool reduced, bool interlaced, + bool margins); +struct drm_display_mode *drm_gtf_mode(struct drm_device *dev, + int hdisplay, int vdisplay, int vrefresh, + bool interlaced, int margins); +struct drm_display_mode *drm_gtf_mode_complex(struct drm_device *dev, + int hdisplay, int vdisplay, + int vrefresh, bool interlaced, + int margins, + int GTF_M, int GTF_2C, + int GTF_K, int GTF_2J); +void drm_display_mode_from_videomode(const struct videomode *vm, + struct drm_display_mode *dmode); +void drm_display_mode_to_videomode(const struct drm_display_mode *dmode, + struct videomode *vm); +void drm_bus_flags_from_videomode(const struct videomode *vm, u32 *bus_flags); + +#if defined(CONFIG_OF) +int of_get_drm_display_mode(struct device_node *np, + struct drm_display_mode *dmode, u32 *bus_flags, + int index); +int of_get_drm_panel_display_mode(struct device_node *np, + struct drm_display_mode *dmode, u32 *bus_flags); +#else +static inline int of_get_drm_display_mode(struct device_node *np, + struct drm_display_mode *dmode, + u32 *bus_flags, int index) +{ + return -EINVAL; +} + +static inline int of_get_drm_panel_display_mode(struct device_node *np, + struct drm_display_mode *dmode, u32 *bus_flags) +{ + return -EINVAL; +} +#endif + +void drm_mode_set_name(struct drm_display_mode *mode); +int drm_mode_vrefresh(const struct drm_display_mode *mode); +void drm_mode_get_hv_timing(const struct drm_display_mode *mode, + int *hdisplay, int *vdisplay); + +void drm_mode_set_crtcinfo(struct drm_display_mode *p, + int adjust_flags); +void drm_mode_copy(struct drm_display_mode *dst, + const struct drm_display_mode *src); +void drm_mode_init(struct drm_display_mode *dst, + const struct drm_display_mode *src); +struct drm_display_mode *drm_mode_duplicate(struct drm_device *dev, + const struct drm_display_mode *mode); +bool drm_mode_match(const struct drm_display_mode *mode1, + const struct drm_display_mode *mode2, + unsigned int match_flags); +bool drm_mode_equal(const struct drm_display_mode *mode1, + const struct drm_display_mode *mode2); +bool drm_mode_equal_no_clocks(const struct drm_display_mode *mode1, + const struct drm_display_mode *mode2); +bool drm_mode_equal_no_clocks_no_stereo(const struct drm_display_mode *mode1, + const struct drm_display_mode *mode2); + +/* for use by the crtc helper probe functions */ +enum drm_mode_status drm_mode_validate_driver(struct drm_device *dev, + const struct drm_display_mode *mode); +enum drm_mode_status drm_mode_validate_size(const struct drm_display_mode *mode, + int maxX, int maxY); +enum drm_mode_status +drm_mode_validate_ycbcr420(const struct drm_display_mode *mode, + struct drm_connector *connector); +void drm_mode_prune_invalid(struct drm_device *dev, + struct list_head *mode_list, bool verbose); +void drm_mode_sort(struct list_head *mode_list); +void drm_connector_list_update(struct drm_connector *connector); + +/* parsing cmdline modes */ +bool +drm_mode_parse_command_line_for_connector(const char *mode_option, + const struct drm_connector *connector, + struct drm_cmdline_mode *mode); +struct drm_display_mode * +drm_mode_create_from_cmdline_mode(struct drm_device *dev, + struct drm_cmdline_mode *cmd); + +#endif /* __DRM_MODES_H__ */ |