diff options
Diffstat (limited to 'include/media/drv-intf/cx25840.h')
-rw-r--r-- | include/media/drv-intf/cx25840.h | 262 |
1 files changed, 262 insertions, 0 deletions
diff --git a/include/media/drv-intf/cx25840.h b/include/media/drv-intf/cx25840.h new file mode 100644 index 0000000000..ba69bc5253 --- /dev/null +++ b/include/media/drv-intf/cx25840.h @@ -0,0 +1,262 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +/* + * cx25840.h - definition for cx25840/1/2/3 inputs + * + * Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl) + */ + +#ifndef _CX25840_H_ +#define _CX25840_H_ + +/* + * Note that the cx25840 driver requires that the bridge driver calls the + * v4l2_subdev's load_fw operation in order to load the driver's firmware. + * This will load the firmware on the first invocation (further ones are NOP). + * Without this the audio standard detection will fail and you will + * only get mono. + * Alternatively, you can call the reset operation (this can be done + * multiple times if needed, each invocation will fully reinitialize + * the device). + * + * Since loading the firmware is often problematic when the driver is + * compiled into the kernel I recommend postponing calling this function + * until the first open of the video device. Another reason for + * postponing it is that loading this firmware takes a long time (seconds) + * due to the slow i2c bus speed. So it will speed up the boot process if + * you can avoid loading the fw as long as the video device isn't used. + */ + +enum cx25840_video_input { + /* Composite video inputs In1-In8 */ + CX25840_COMPOSITE1 = 1, + CX25840_COMPOSITE2, + CX25840_COMPOSITE3, + CX25840_COMPOSITE4, + CX25840_COMPOSITE5, + CX25840_COMPOSITE6, + CX25840_COMPOSITE7, + CX25840_COMPOSITE8, + + /* + * S-Video inputs consist of one luma input (In1-In8) ORed with one + * chroma input (In5-In8) + */ + CX25840_SVIDEO_LUMA1 = 0x10, + CX25840_SVIDEO_LUMA2 = 0x20, + CX25840_SVIDEO_LUMA3 = 0x30, + CX25840_SVIDEO_LUMA4 = 0x40, + CX25840_SVIDEO_LUMA5 = 0x50, + CX25840_SVIDEO_LUMA6 = 0x60, + CX25840_SVIDEO_LUMA7 = 0x70, + CX25840_SVIDEO_LUMA8 = 0x80, + CX25840_SVIDEO_CHROMA4 = 0x400, + CX25840_SVIDEO_CHROMA5 = 0x500, + CX25840_SVIDEO_CHROMA6 = 0x600, + CX25840_SVIDEO_CHROMA7 = 0x700, + CX25840_SVIDEO_CHROMA8 = 0x800, + + /* S-Video aliases for common luma/chroma combinations */ + CX25840_SVIDEO1 = 0x510, + CX25840_SVIDEO2 = 0x620, + CX25840_SVIDEO3 = 0x730, + CX25840_SVIDEO4 = 0x840, + + /* Allow frames to specify specific input configurations */ + CX25840_VIN1_CH1 = 0x80000000, + CX25840_VIN2_CH1 = 0x80000001, + CX25840_VIN3_CH1 = 0x80000002, + CX25840_VIN4_CH1 = 0x80000003, + CX25840_VIN5_CH1 = 0x80000004, + CX25840_VIN6_CH1 = 0x80000005, + CX25840_VIN7_CH1 = 0x80000006, + CX25840_VIN8_CH1 = 0x80000007, + CX25840_VIN4_CH2 = 0x80000000, + CX25840_VIN5_CH2 = 0x80000010, + CX25840_VIN6_CH2 = 0x80000020, + CX25840_NONE_CH2 = 0x80000030, + CX25840_VIN7_CH3 = 0x80000000, + CX25840_VIN8_CH3 = 0x80000040, + CX25840_NONE0_CH3 = 0x80000080, + CX25840_NONE1_CH3 = 0x800000c0, + CX25840_SVIDEO_ON = 0x80000100, + CX25840_COMPONENT_ON = 0x80000200, + CX25840_DIF_ON = 0x80000400, +}; + +/* + * The defines below are used to set the chip video output settings + * in the generic mode that can be enabled by calling the subdevice + * init core op. + * + * The requested settings can be passed to the init core op as + * @val parameter and to the s_routing video op as @config parameter. + * + * For details please refer to the section 3.7 Video Output Formatting and + * to Video Out Control 1 to 4 registers in the section 5.6 Video Decoder Core + * of the chip datasheet. + */ +#define CX25840_VCONFIG_FMT_SHIFT 0 +#define CX25840_VCONFIG_FMT_MASK GENMASK(2, 0) +#define CX25840_VCONFIG_FMT_BT601 BIT(0) +#define CX25840_VCONFIG_FMT_BT656 BIT(1) +#define CX25840_VCONFIG_FMT_VIP11 GENMASK(1, 0) +#define CX25840_VCONFIG_FMT_VIP2 BIT(2) + +#define CX25840_VCONFIG_RES_SHIFT 3 +#define CX25840_VCONFIG_RES_MASK GENMASK(4, 3) +#define CX25840_VCONFIG_RES_8BIT BIT(3) +#define CX25840_VCONFIG_RES_10BIT BIT(4) + +#define CX25840_VCONFIG_VBIRAW_SHIFT 5 +#define CX25840_VCONFIG_VBIRAW_MASK GENMASK(6, 5) +#define CX25840_VCONFIG_VBIRAW_DISABLED BIT(5) +#define CX25840_VCONFIG_VBIRAW_ENABLED BIT(6) + +#define CX25840_VCONFIG_ANCDATA_SHIFT 7 +#define CX25840_VCONFIG_ANCDATA_MASK GENMASK(8, 7) +#define CX25840_VCONFIG_ANCDATA_DISABLED BIT(7) +#define CX25840_VCONFIG_ANCDATA_ENABLED BIT(8) + +#define CX25840_VCONFIG_TASKBIT_SHIFT 9 +#define CX25840_VCONFIG_TASKBIT_MASK GENMASK(10, 9) +#define CX25840_VCONFIG_TASKBIT_ZERO BIT(9) +#define CX25840_VCONFIG_TASKBIT_ONE BIT(10) + +#define CX25840_VCONFIG_ACTIVE_SHIFT 11 +#define CX25840_VCONFIG_ACTIVE_MASK GENMASK(12, 11) +#define CX25840_VCONFIG_ACTIVE_COMPOSITE BIT(11) +#define CX25840_VCONFIG_ACTIVE_HORIZONTAL BIT(12) + +#define CX25840_VCONFIG_VALID_SHIFT 13 +#define CX25840_VCONFIG_VALID_MASK GENMASK(14, 13) +#define CX25840_VCONFIG_VALID_NORMAL BIT(13) +#define CX25840_VCONFIG_VALID_ANDACTIVE BIT(14) + +#define CX25840_VCONFIG_HRESETW_SHIFT 15 +#define CX25840_VCONFIG_HRESETW_MASK GENMASK(16, 15) +#define CX25840_VCONFIG_HRESETW_NORMAL BIT(15) +#define CX25840_VCONFIG_HRESETW_PIXCLK BIT(16) + +#define CX25840_VCONFIG_CLKGATE_SHIFT 17 +#define CX25840_VCONFIG_CLKGATE_MASK GENMASK(18, 17) +#define CX25840_VCONFIG_CLKGATE_NONE BIT(17) +#define CX25840_VCONFIG_CLKGATE_VALID BIT(18) +#define CX25840_VCONFIG_CLKGATE_VALIDACTIVE GENMASK(18, 17) + +#define CX25840_VCONFIG_DCMODE_SHIFT 19 +#define CX25840_VCONFIG_DCMODE_MASK GENMASK(20, 19) +#define CX25840_VCONFIG_DCMODE_DWORDS BIT(19) +#define CX25840_VCONFIG_DCMODE_BYTES BIT(20) + +#define CX25840_VCONFIG_IDID0S_SHIFT 21 +#define CX25840_VCONFIG_IDID0S_MASK GENMASK(22, 21) +#define CX25840_VCONFIG_IDID0S_NORMAL BIT(21) +#define CX25840_VCONFIG_IDID0S_LINECNT BIT(22) + +#define CX25840_VCONFIG_VIPCLAMP_SHIFT 23 +#define CX25840_VCONFIG_VIPCLAMP_MASK GENMASK(24, 23) +#define CX25840_VCONFIG_VIPCLAMP_ENABLED BIT(23) +#define CX25840_VCONFIG_VIPCLAMP_DISABLED BIT(24) + +enum cx25840_audio_input { + /* Audio inputs: serial or In4-In8 */ + CX25840_AUDIO_SERIAL, + CX25840_AUDIO4 = 4, + CX25840_AUDIO5, + CX25840_AUDIO6, + CX25840_AUDIO7, + CX25840_AUDIO8, +}; + +enum cx25840_io_pin { + CX25840_PIN_DVALID_PRGM0 = 0, + CX25840_PIN_FIELD_PRGM1, + CX25840_PIN_HRESET_PRGM2, + CX25840_PIN_VRESET_HCTL_PRGM3, + CX25840_PIN_IRQ_N_PRGM4, + CX25840_PIN_IR_TX_PRGM6, + CX25840_PIN_IR_RX_PRGM5, + CX25840_PIN_GPIO0_PRGM8, + CX25840_PIN_GPIO1_PRGM9, + CX25840_PIN_SA_SDIN, /* Alternate GP Input only */ + CX25840_PIN_SA_SDOUT, /* Alternate GP Input only */ + CX25840_PIN_PLL_CLK_PRGM7, + CX25840_PIN_CHIP_SEL_VIPCLK, /* Output only */ +}; + +enum cx25840_io_pad { + /* Output pads, these must match the actual chip register values */ + CX25840_PAD_DEFAULT = 0, + CX25840_PAD_ACTIVE, + CX25840_PAD_VACTIVE, + CX25840_PAD_CBFLAG, + CX25840_PAD_VID_DATA_EXT0, + CX25840_PAD_VID_DATA_EXT1, + CX25840_PAD_GPO0, + CX25840_PAD_GPO1, + CX25840_PAD_GPO2, + CX25840_PAD_GPO3, + CX25840_PAD_IRQ_N, + CX25840_PAD_AC_SYNC, + CX25840_PAD_AC_SDOUT, + CX25840_PAD_PLL_CLK, + CX25840_PAD_VRESET, + CX25840_PAD_RESERVED, + /* Pads for PLL_CLK output only */ + CX25840_PAD_XTI_X5_DLL, + CX25840_PAD_AUX_PLL, + CX25840_PAD_VID_PLL, + CX25840_PAD_XTI, + /* Input Pads */ + CX25840_PAD_GPI0, + CX25840_PAD_GPI1, + CX25840_PAD_GPI2, + CX25840_PAD_GPI3, +}; + +enum cx25840_io_pin_strength { + CX25840_PIN_DRIVE_MEDIUM = 0, + CX25840_PIN_DRIVE_SLOW, + CX25840_PIN_DRIVE_FAST, +}; + +enum cx23885_io_pin { + CX23885_PIN_IR_RX_GPIO19, + CX23885_PIN_IR_TX_GPIO20, + CX23885_PIN_I2S_SDAT_GPIO21, + CX23885_PIN_I2S_WCLK_GPIO22, + CX23885_PIN_I2S_BCLK_GPIO23, + CX23885_PIN_IRQ_N_GPIO16, +}; + +enum cx23885_io_pad { + CX23885_PAD_IR_RX, + CX23885_PAD_GPIO19, + CX23885_PAD_IR_TX, + CX23885_PAD_GPIO20, + CX23885_PAD_I2S_SDAT, + CX23885_PAD_GPIO21, + CX23885_PAD_I2S_WCLK, + CX23885_PAD_GPIO22, + CX23885_PAD_I2S_BCLK, + CX23885_PAD_GPIO23, + CX23885_PAD_IRQ_N, + CX23885_PAD_GPIO16, +}; + +/* + * pvr150_workaround activates a workaround for a hardware bug that is + * present in Hauppauge PVR-150 (and possibly PVR-500) cards that have + * certain NTSC tuners (tveeprom tuner model numbers 85, 99 and 112). The + * audio autodetect fails on some channels for these models and the workaround + * is to select the audio standard explicitly. Many thanks to Hauppauge for + * providing this information. + * + * This platform data only needs to be supplied by the ivtv driver. + */ +struct cx25840_platform_data { + int pvr150_workaround; +}; + +#endif |