summaryrefslogtreecommitdiffstats
path: root/include/media
diff options
context:
space:
mode:
Diffstat (limited to 'include/media')
-rw-r--r--include/media/cec.h3
-rw-r--r--include/media/ipu6-pci-table.h28
-rw-r--r--include/media/media-device.h6
-rw-r--r--include/media/v4l2-async.h4
-rw-r--r--include/media/v4l2-device.h7
-rw-r--r--include/media/v4l2-ioctl.h4
-rw-r--r--include/media/v4l2-mem2mem.h2
-rw-r--r--include/media/v4l2-subdev.h70
-rw-r--r--include/media/videobuf2-core.h52
-rw-r--r--include/media/videobuf2-v4l2.h2
10 files changed, 150 insertions, 28 deletions
diff --git a/include/media/cec.h b/include/media/cec.h
index cc3fcd0496..d131514032 100644
--- a/include/media/cec.h
+++ b/include/media/cec.h
@@ -173,7 +173,7 @@ struct cec_adap_ops {
* case the transmit will finish, but will not retransmit
* and be marked as ABORTED.
* @xfer_timeout_ms: the transfer timeout in ms.
- * If 0, then timeout after 2.1 ms.
+ * If 0, then timeout after 2100 ms.
* @kthread_config: kthread used to configure a CEC adapter
* @config_completion: used to signal completion of the config kthread
* @kthread: main CEC processing thread
@@ -187,6 +187,7 @@ struct cec_adap_ops {
* in order to transmit or receive CEC messages. This is usually a HW
* limitation.
* @is_enabled: the CEC adapter is enabled
+ * @is_claiming_log_addrs: true if cec_claim_log_addrs() is running
* @is_configuring: the CEC adapter is configuring (i.e. claiming LAs)
* @must_reconfigure: while configuring, the PA changed, so reclaim LAs
* @is_configured: the CEC adapter is configured (i.e. has claimed LAs)
diff --git a/include/media/ipu6-pci-table.h b/include/media/ipu6-pci-table.h
new file mode 100644
index 0000000000..0899d9d2f9
--- /dev/null
+++ b/include/media/ipu6-pci-table.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2024 Intel Corporation
+ */
+
+#ifndef __IPU6_PCI_TBL_H__
+#define __IPU6_PCI_TBL_H__
+
+#include <linux/pci.h>
+
+#define PCI_DEVICE_ID_INTEL_IPU6 0x9a19
+#define PCI_DEVICE_ID_INTEL_IPU6SE 0x4e19
+#define PCI_DEVICE_ID_INTEL_IPU6EP_ADLP 0x465d
+#define PCI_DEVICE_ID_INTEL_IPU6EP_ADLN 0x462e
+#define PCI_DEVICE_ID_INTEL_IPU6EP_RPLP 0xa75d
+#define PCI_DEVICE_ID_INTEL_IPU6EP_MTL 0x7d19
+
+static const struct pci_device_id ipu6_pci_tbl[] = {
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IPU6) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IPU6SE) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IPU6EP_ADLP) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IPU6EP_ADLN) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IPU6EP_RPLP) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IPU6EP_MTL) },
+ { }
+};
+
+#endif /* __IPU6_PCI_TBL_H__ */
diff --git a/include/media/media-device.h b/include/media/media-device.h
index 2c146d0b2b..53d2a16a70 100644
--- a/include/media/media-device.h
+++ b/include/media/media-device.h
@@ -429,6 +429,9 @@ void __media_device_usb_init(struct media_device *mdev,
const char *driver_name);
#else
+static inline void media_device_init(struct media_device *mdev)
+{
+}
static inline int media_device_register(struct media_device *mdev)
{
return 0;
@@ -436,6 +439,9 @@ static inline int media_device_register(struct media_device *mdev)
static inline void media_device_unregister(struct media_device *mdev)
{
}
+static inline void media_device_cleanup(struct media_device *mdev)
+{
+}
static inline int media_device_register_entity(struct media_device *mdev,
struct media_entity *entity)
{
diff --git a/include/media/v4l2-async.h b/include/media/v4l2-async.h
index 9bd326d311..f26c323e9c 100644
--- a/include/media/v4l2-async.h
+++ b/include/media/v4l2-async.h
@@ -310,7 +310,9 @@ void v4l2_async_nf_cleanup(struct v4l2_async_notifier *notifier);
*
* @sd: pointer to &struct v4l2_subdev
*/
-int v4l2_async_register_subdev(struct v4l2_subdev *sd);
+#define v4l2_async_register_subdev(sd) \
+ __v4l2_async_register_subdev(sd, THIS_MODULE)
+int __v4l2_async_register_subdev(struct v4l2_subdev *sd, struct module *module);
/**
* v4l2_async_register_subdev_sensor - registers a sensor sub-device to the
diff --git a/include/media/v4l2-device.h b/include/media/v4l2-device.h
index f6f111fae3..dd897a362f 100644
--- a/include/media/v4l2-device.h
+++ b/include/media/v4l2-device.h
@@ -156,8 +156,11 @@ void v4l2_device_unregister(struct v4l2_device *v4l2_dev);
* An error is returned if the module is no longer loaded on any attempts
* to register it.
*/
-int __must_check v4l2_device_register_subdev(struct v4l2_device *v4l2_dev,
- struct v4l2_subdev *sd);
+#define v4l2_device_register_subdev(v4l2_dev, sd) \
+ __v4l2_device_register_subdev(v4l2_dev, sd, THIS_MODULE)
+int __must_check __v4l2_device_register_subdev(struct v4l2_device *v4l2_dev,
+ struct v4l2_subdev *sd,
+ struct module *module);
/**
* v4l2_device_unregister_subdev - Unregisters a subdev with a v4l2 device.
diff --git a/include/media/v4l2-ioctl.h b/include/media/v4l2-ioctl.h
index edb733f216..bdbb7e5423 100644
--- a/include/media/v4l2-ioctl.h
+++ b/include/media/v4l2-ioctl.h
@@ -163,6 +163,8 @@ struct v4l2_fh;
* :ref:`VIDIOC_CREATE_BUFS <vidioc_create_bufs>` ioctl
* @vidioc_prepare_buf: pointer to the function that implements
* :ref:`VIDIOC_PREPARE_BUF <vidioc_prepare_buf>` ioctl
+ * @vidioc_remove_bufs: pointer to the function that implements
+ * :ref:`VIDIOC_REMOVE_BUFS <vidioc_remove_bufs>` ioctl
* @vidioc_overlay: pointer to the function that implements
* :ref:`VIDIOC_OVERLAY <vidioc_overlay>` ioctl
* @vidioc_g_fbuf: pointer to the function that implements
@@ -422,6 +424,8 @@ struct v4l2_ioctl_ops {
struct v4l2_create_buffers *b);
int (*vidioc_prepare_buf)(struct file *file, void *fh,
struct v4l2_buffer *b);
+ int (*vidioc_remove_bufs)(struct file *file, void *fh,
+ struct v4l2_remove_buffers *d);
int (*vidioc_overlay)(struct file *file, void *fh, unsigned int i);
int (*vidioc_g_fbuf)(struct file *file, void *fh,
diff --git a/include/media/v4l2-mem2mem.h b/include/media/v4l2-mem2mem.h
index 7f1af1f7f9..0af330cf91 100644
--- a/include/media/v4l2-mem2mem.h
+++ b/include/media/v4l2-mem2mem.h
@@ -867,6 +867,8 @@ int v4l2_m2m_ioctl_reqbufs(struct file *file, void *priv,
struct v4l2_requestbuffers *rb);
int v4l2_m2m_ioctl_create_bufs(struct file *file, void *fh,
struct v4l2_create_buffers *create);
+int v4l2_m2m_ioctl_remove_bufs(struct file *file, void *priv,
+ struct v4l2_remove_buffers *d);
int v4l2_m2m_ioctl_querybuf(struct file *file, void *fh,
struct v4l2_buffer *buf);
int v4l2_m2m_ioctl_expbuf(struct file *file, void *fh,
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index a9e6b81462..e30c463d90 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -452,14 +452,6 @@ enum v4l2_subdev_pre_streamon_flags {
*
* @g_pixelaspect: callback to return the pixelaspect ratio.
*
- * @s_dv_timings: Set custom dv timings in the sub device. This is used
- * when sub device is capable of setting detailed timing information
- * in the hardware to generate/detect the video signal.
- *
- * @g_dv_timings: Get custom dv timings in the sub device.
- *
- * @query_dv_timings: callback for VIDIOC_QUERY_DV_TIMINGS() ioctl handler code.
- *
* @s_rx_buffer: set a host allocated memory buffer for the subdev. The subdev
* can adjust @size to a lower value and must not write more data to the
* buffer starting at @data than the original value of @size.
@@ -490,12 +482,6 @@ struct v4l2_subdev_video_ops {
int (*g_input_status)(struct v4l2_subdev *sd, u32 *status);
int (*s_stream)(struct v4l2_subdev *sd, int enable);
int (*g_pixelaspect)(struct v4l2_subdev *sd, struct v4l2_fract *aspect);
- int (*s_dv_timings)(struct v4l2_subdev *sd,
- struct v4l2_dv_timings *timings);
- int (*g_dv_timings)(struct v4l2_subdev *sd,
- struct v4l2_dv_timings *timings);
- int (*query_dv_timings)(struct v4l2_subdev *sd,
- struct v4l2_dv_timings *timings);
int (*s_rx_buffer)(struct v4l2_subdev *sd, void *buf,
unsigned int *size);
int (*pre_streamon)(struct v4l2_subdev *sd, u32 flags);
@@ -728,12 +714,14 @@ struct v4l2_subdev_stream_configs {
/**
* struct v4l2_subdev_krouting - subdev routing table
*
+ * @len_routes: length of routes array, in routes
* @num_routes: number of routes
* @routes: &struct v4l2_subdev_route
*
* This structure contains the routing table for a subdev.
*/
struct v4l2_subdev_krouting {
+ unsigned int len_routes;
unsigned int num_routes;
struct v4l2_subdev_route *routes;
};
@@ -791,6 +779,14 @@ struct v4l2_subdev_state {
*
* @set_edid: callback for VIDIOC_SUBDEV_S_EDID() ioctl handler code.
*
+ * @s_dv_timings: Set custom dv timings in the sub device. This is used
+ * when sub device is capable of setting detailed timing information
+ * in the hardware to generate/detect the video signal.
+ *
+ * @g_dv_timings: Get custom dv timings in the sub device.
+ *
+ * @query_dv_timings: callback for VIDIOC_QUERY_DV_TIMINGS() ioctl handler code.
+ *
* @dv_timings_cap: callback for VIDIOC_SUBDEV_DV_TIMINGS_CAP() ioctl handler
* code.
*
@@ -864,6 +860,12 @@ struct v4l2_subdev_pad_ops {
struct v4l2_subdev_frame_interval *interval);
int (*get_edid)(struct v4l2_subdev *sd, struct v4l2_edid *edid);
int (*set_edid)(struct v4l2_subdev *sd, struct v4l2_edid *edid);
+ int (*s_dv_timings)(struct v4l2_subdev *sd, unsigned int pad,
+ struct v4l2_dv_timings *timings);
+ int (*g_dv_timings)(struct v4l2_subdev *sd, unsigned int pad,
+ struct v4l2_dv_timings *timings);
+ int (*query_dv_timings)(struct v4l2_subdev *sd, unsigned int pad,
+ struct v4l2_dv_timings *timings);
int (*dv_timings_cap)(struct v4l2_subdev *sd,
struct v4l2_dv_timings_cap *cap);
int (*enum_dv_timings)(struct v4l2_subdev *sd,
@@ -1725,6 +1727,46 @@ static inline void v4l2_subdev_unlock_state(struct v4l2_subdev_state *state)
}
/**
+ * v4l2_subdev_lock_states - Lock two sub-device states
+ * @state1: One subdevice state
+ * @state2: The other subdevice state
+ *
+ * Locks the state of two sub-devices.
+ *
+ * The states must be unlocked with v4l2_subdev_unlock_states() after use.
+ *
+ * This differs from calling v4l2_subdev_lock_state() on both states so that if
+ * the states share the same lock, the lock is acquired only once (so no
+ * deadlock occurs). The caller is responsible for ensuring the locks will
+ * always be acquired in the same order.
+ */
+static inline void v4l2_subdev_lock_states(struct v4l2_subdev_state *state1,
+ struct v4l2_subdev_state *state2)
+{
+ mutex_lock(state1->lock);
+ if (state1->lock != state2->lock)
+ mutex_lock(state2->lock);
+}
+
+/**
+ * v4l2_subdev_unlock_states() - Unlock two sub-device states
+ * @state1: One subdevice state
+ * @state2: The other subdevice state
+ *
+ * Unlocks the state of two sub-devices.
+ *
+ * This differs from calling v4l2_subdev_unlock_state() on both states so that
+ * if the states share the same lock, the lock is released only once.
+ */
+static inline void v4l2_subdev_unlock_states(struct v4l2_subdev_state *state1,
+ struct v4l2_subdev_state *state2)
+{
+ mutex_unlock(state1->lock);
+ if (state1->lock != state2->lock)
+ mutex_unlock(state2->lock);
+}
+
+/**
* v4l2_subdev_get_unlocked_active_state() - Checks that the active subdev state
* is unlocked and returns it
* @sd: The subdevice
diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h
index 8b86996b27..955237ac50 100644
--- a/include/media/videobuf2-core.h
+++ b/include/media/videobuf2-core.h
@@ -346,8 +346,8 @@ struct vb2_buffer {
* describes the requested number of planes and sizes\[\]
* contains the requested plane sizes. In this case
* \*num_buffers are being allocated additionally to
- * q->num_buffers. If either \*num_planes or the requested
- * sizes are invalid callback must return %-EINVAL.
+ * the buffers already allocated. If either \*num_planes
+ * or the requested sizes are invalid callback must return %-EINVAL.
* @wait_prepare: release any locks taken while calling vb2 functions;
* it is called before an ioctl needs to wait for a new
* buffer to arrive; required to avoid a deadlock in
@@ -549,9 +549,21 @@ struct vb2_buf_ops {
* @start_streaming can be called. Used when a DMA engine
* cannot be started unless at least this number of buffers
* have been queued into the driver.
- * VIDIOC_REQBUFS will ensure at least @min_queued_buffers
+ * VIDIOC_REQBUFS will ensure at least @min_queued_buffers + 1
* buffers will be allocated. Note that VIDIOC_CREATE_BUFS will not
* modify the requested buffer count.
+ * @min_reqbufs_allocation: the minimum number of buffers to be allocated when
+ * calling VIDIOC_REQBUFS. Note that VIDIOC_CREATE_BUFS will *not*
+ * modify the requested buffer count and does not use this field.
+ * Drivers can set this if there has to be a certain number of
+ * buffers available for the hardware to work effectively.
+ * This allows calling VIDIOC_REQBUFS with a buffer count of 1 and
+ * it will be automatically adjusted to a workable buffer count.
+ * If set, then @min_reqbufs_allocation must be larger than
+ * @min_queued_buffers + 1.
+ * If this field is > 3, then it is highly recommended that the
+ * driver implements the V4L2_CID_MIN_BUFFERS_FOR_CAPTURE/OUTPUT
+ * control.
* @alloc_devs: &struct device memory type/allocator-specific per-plane device
*/
/*
@@ -559,8 +571,9 @@ struct vb2_buf_ops {
* @mmap_lock: private mutex used when buffers are allocated/freed/mmapped
* @memory: current memory type used
* @dma_dir: DMA mapping direction.
- * @bufs: videobuf2 buffer structures
- * @num_buffers: number of allocated/used buffers
+ * @bufs: videobuf2 buffer structures. If it is non-NULL then
+ * bufs_bitmap is also non-NULL.
+ * @bufs_bitmap: bitmap tracking whether each bufs[] entry is used
* @max_num_buffers: upper limit of number of allocated/used buffers.
* If set to 0 v4l2 core will change it VB2_MAX_FRAME
* for backward compatibility.
@@ -582,6 +595,7 @@ struct vb2_buf_ops {
* released. Used to prevent destroying the queue by other threads.
* @is_multiplanar: set if buffer type is multiplanar
* @is_output: set if buffer type is output
+ * @is_busy: set if at least one buffer has been allocated at some time.
* @copy_timestamp: set if vb2-core should set timestamps
* @last_buffer_dequeued: used in poll() and DQBUF to immediately return if the
* last decoded buffer was already dequeued. Set for capture queues
@@ -621,6 +635,7 @@ struct vb2_queue {
u32 timestamp_flags;
gfp_t gfp_flags;
u32 min_queued_buffers;
+ u32 min_reqbufs_allocation;
struct device *alloc_devs[VB2_MAX_PLANES];
@@ -629,7 +644,7 @@ struct vb2_queue {
unsigned int memory;
enum dma_data_direction dma_dir;
struct vb2_buffer **bufs;
- unsigned int num_buffers;
+ unsigned long *bufs_bitmap;
unsigned int max_num_buffers;
struct list_head queued_list;
@@ -647,6 +662,7 @@ struct vb2_queue {
unsigned int waiting_in_dqbuf:1;
unsigned int is_multiplanar:1;
unsigned int is_output:1;
+ unsigned int is_busy:1;
unsigned int copy_timestamp:1;
unsigned int last_buffer_dequeued:1;
@@ -811,6 +827,8 @@ int vb2_core_reqbufs(struct vb2_queue *q, enum vb2_memory memory,
* @count: requested buffer count.
* @requested_planes: number of planes requested.
* @requested_sizes: array with the size of the planes.
+ * @first_index: index of the first created buffer, all allocated buffers have
+ * indices in the range [first_index..first_index+count-1]
*
* Videobuf2 core helper to implement VIDIOC_CREATE_BUFS() operation. It is
* called internally by VB2 by an API-specific handler, like
@@ -827,7 +845,8 @@ int vb2_core_reqbufs(struct vb2_queue *q, enum vb2_memory memory,
int vb2_core_create_bufs(struct vb2_queue *q, enum vb2_memory memory,
unsigned int flags, unsigned int *count,
unsigned int requested_planes,
- const unsigned int requested_sizes[]);
+ const unsigned int requested_sizes[],
+ unsigned int *first_index);
/**
* vb2_core_prepare_buf() - Pass ownership of a buffer from userspace
@@ -852,6 +871,16 @@ int vb2_core_create_bufs(struct vb2_queue *q, enum vb2_memory memory,
int vb2_core_prepare_buf(struct vb2_queue *q, struct vb2_buffer *vb, void *pb);
/**
+ * vb2_core_remove_bufs() -
+ * @q: pointer to &struct vb2_queue with videobuf2 queue.
+ * @start: first index of the range of buffers to remove.
+ * @count: number of buffers to remove.
+ *
+ * Return: returns zero on success; an error code otherwise.
+ */
+int vb2_core_remove_bufs(struct vb2_queue *q, unsigned int start, unsigned int count);
+
+/**
* vb2_core_qbuf() - Queue a buffer from userspace
*
* @q: pointer to &struct vb2_queue with videobuf2 queue.
@@ -1155,7 +1184,10 @@ static inline bool vb2_fileio_is_active(struct vb2_queue *q)
*/
static inline unsigned int vb2_get_num_buffers(struct vb2_queue *q)
{
- return q->num_buffers;
+ if (q->bufs_bitmap)
+ return bitmap_weight(q->bufs_bitmap, q->max_num_buffers);
+
+ return 0;
}
/**
@@ -1166,7 +1198,7 @@ static inline unsigned int vb2_get_num_buffers(struct vb2_queue *q)
*/
static inline bool vb2_is_busy(struct vb2_queue *q)
{
- return vb2_get_num_buffers(q) > 0;
+ return !!q->is_busy;
}
/**
@@ -1264,7 +1296,7 @@ static inline struct vb2_buffer *vb2_get_buffer(struct vb2_queue *q,
if (index >= q->max_num_buffers)
return NULL;
- if (index < q->num_buffers)
+ if (test_bit(index, q->bufs_bitmap))
return q->bufs[index];
return NULL;
}
diff --git a/include/media/videobuf2-v4l2.h b/include/media/videobuf2-v4l2.h
index 5a84588785..77ce8238ab 100644
--- a/include/media/videobuf2-v4l2.h
+++ b/include/media/videobuf2-v4l2.h
@@ -334,6 +334,8 @@ int vb2_ioctl_streamon(struct file *file, void *priv, enum v4l2_buf_type i);
int vb2_ioctl_streamoff(struct file *file, void *priv, enum v4l2_buf_type i);
int vb2_ioctl_expbuf(struct file *file, void *priv,
struct v4l2_exportbuffer *p);
+int vb2_ioctl_remove_bufs(struct file *file, void *priv,
+ struct v4l2_remove_buffers *p);
/* struct v4l2_file_operations helpers */
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-27 20:48:55 +0000