diff options
Diffstat (limited to 'include/misc')
| -rw-r--r-- | include/misc/altera.h | 35 | ||||
| -rw-r--r-- | include/misc/cxl-base.h | 48 | ||||
| -rw-r--r-- | include/misc/cxl.h | 265 | ||||
| -rw-r--r-- | include/misc/cxllib.h | 129 | ||||
| -rw-r--r-- | include/misc/ocxl-config.h | 46 | ||||
| -rw-r--r-- | include/misc/ocxl.h | 471 |
6 files changed, 994 insertions, 0 deletions
diff --git a/include/misc/altera.h b/include/misc/altera.h new file mode 100644 index 0000000000..60cb5c598b --- /dev/null +++ b/include/misc/altera.h @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * altera.h + * + * altera FPGA driver + * + * Copyright (C) Altera Corporation 1998-2001 + * Copyright (C) 2010 NetUP Inc. + * Copyright (C) 2010 Igor M. Liplianin <liplianin@netup.ru> + */ + +#ifndef _ALTERA_H_ +#define _ALTERA_H_ + +struct altera_config { + void *dev; + u8 *action; + int (*jtag_io) (void *dev, int tms, int tdi, int tdo); +}; + +#if defined(CONFIG_ALTERA_STAPL) || \ + (defined(CONFIG_ALTERA_STAPL_MODULE) && defined(MODULE)) + +extern int altera_init(struct altera_config *config, const struct firmware *fw); +#else + +static inline int altera_init(struct altera_config *config, + const struct firmware *fw) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return 0; +} +#endif /* CONFIG_ALTERA_STAPL */ + +#endif /* _ALTERA_H_ */ diff --git a/include/misc/cxl-base.h b/include/misc/cxl-base.h new file mode 100644 index 0000000000..2251da7f32 --- /dev/null +++ b/include/misc/cxl-base.h @@ -0,0 +1,48 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright 2014 IBM Corp. + */ + +#ifndef _MISC_CXL_BASE_H +#define _MISC_CXL_BASE_H + +#ifdef CONFIG_CXL_BASE + +#define CXL_IRQ_RANGES 4 + +struct cxl_irq_ranges { + irq_hw_number_t offset[CXL_IRQ_RANGES]; + irq_hw_number_t range[CXL_IRQ_RANGES]; +}; + +extern atomic_t cxl_use_count; + +static inline bool cxl_ctx_in_use(void) +{ + return (atomic_read(&cxl_use_count) != 0); +} + +static inline void cxl_ctx_get(void) +{ + atomic_inc(&cxl_use_count); +} + +static inline void cxl_ctx_put(void) +{ + atomic_dec(&cxl_use_count); +} + +struct cxl_afu *cxl_afu_get(struct cxl_afu *afu); +void cxl_afu_put(struct cxl_afu *afu); +void cxl_slbia(struct mm_struct *mm); + +#else /* CONFIG_CXL_BASE */ + +static inline bool cxl_ctx_in_use(void) { return false; } +static inline struct cxl_afu *cxl_afu_get(struct cxl_afu *afu) { return NULL; } +static inline void cxl_afu_put(struct cxl_afu *afu) {} +static inline void cxl_slbia(struct mm_struct *mm) {} + +#endif /* CONFIG_CXL_BASE */ + +#endif diff --git a/include/misc/cxl.h b/include/misc/cxl.h new file mode 100644 index 0000000000..d8044299d6 --- /dev/null +++ b/include/misc/cxl.h @@ -0,0 +1,265 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright 2015 IBM Corp. + */ + +#ifndef _MISC_CXL_H +#define _MISC_CXL_H + +#include <linux/pci.h> +#include <linux/poll.h> +#include <linux/interrupt.h> +#include <uapi/misc/cxl.h> + +/* + * This documents the in kernel API for driver to use CXL. It allows kernel + * drivers to bind to AFUs using an AFU configuration record exposed as a PCI + * configuration record. + * + * This API enables control over AFU and contexts which can't be part of the + * generic PCI API. This API is agnostic to the actual AFU. + */ + +/* Get the AFU associated with a pci_dev */ +struct cxl_afu *cxl_pci_to_afu(struct pci_dev *dev); + +/* Get the AFU conf record number associated with a pci_dev */ +unsigned int cxl_pci_to_cfg_record(struct pci_dev *dev); + + +/* + * Context lifetime overview: + * + * An AFU context may be inited and then started and stopped multiple times + * before it's released. ie. + * - cxl_dev_context_init() + * - cxl_start_context() + * - cxl_stop_context() + * - cxl_start_context() + * - cxl_stop_context() + * ...repeat... + * - cxl_release_context() + * Once released, a context can't be started again. + * + * One context is inited by the cxl driver for every pci_dev. This is to be + * used as a default kernel context. cxl_get_context() will get this + * context. This context will be released by PCI hot unplug, so doesn't need to + * be released explicitly by drivers. + * + * Additional kernel contexts may be inited using cxl_dev_context_init(). + * These must be released using cxl_context_detach(). + * + * Once a context has been inited, IRQs may be configured. Firstly these IRQs + * must be allocated (cxl_allocate_afu_irqs()), then individually mapped to + * specific handlers (cxl_map_afu_irq()). + * + * These IRQs can be unmapped (cxl_unmap_afu_irq()) and finally released + * (cxl_free_afu_irqs()). + * + * The AFU can be reset (cxl_afu_reset()). This will cause the PSL/AFU + * hardware to lose track of all contexts. It's upto the caller of + * cxl_afu_reset() to restart these contexts. + */ + +/* + * On pci_enabled_device(), the cxl driver will init a single cxl context for + * use by the driver. It doesn't start this context (as that will likely + * generate DMA traffic for most AFUs). + * + * This gets the default context associated with this pci_dev. This context + * doesn't need to be released as this will be done by the PCI subsystem on hot + * unplug. + */ +struct cxl_context *cxl_get_context(struct pci_dev *dev); +/* + * Allocate and initalise a context associated with a AFU PCI device. This + * doesn't start the context in the AFU. + */ +struct cxl_context *cxl_dev_context_init(struct pci_dev *dev); +/* + * Release and free a context. Context should be stopped before calling. + */ +int cxl_release_context(struct cxl_context *ctx); + +/* + * Set and get private data associated with a context. Allows drivers to have a + * back pointer to some useful structure. + */ +int cxl_set_priv(struct cxl_context *ctx, void *priv); +void *cxl_get_priv(struct cxl_context *ctx); + +/* + * Allocate AFU interrupts for this context. num=0 will allocate the default + * for this AFU as given in the AFU descriptor. This number doesn't include the + * interrupt 0 (CAIA defines AFU IRQ 0 for page faults). Each interrupt to be + * used must map a handler with cxl_map_afu_irq. + */ +int cxl_allocate_afu_irqs(struct cxl_context *cxl, int num); +/* Free allocated interrupts */ +void cxl_free_afu_irqs(struct cxl_context *cxl); + +/* + * Map a handler for an AFU interrupt associated with a particular context. AFU + * IRQS numbers start from 1 (CAIA defines AFU IRQ 0 for page faults). cookie + * is private data is that will be provided to the interrupt handler. + */ +int cxl_map_afu_irq(struct cxl_context *cxl, int num, + irq_handler_t handler, void *cookie, char *name); +/* unmap mapped IRQ handlers */ +void cxl_unmap_afu_irq(struct cxl_context *cxl, int num, void *cookie); + +/* + * Start work on the AFU. This starts an cxl context and associates it with a + * task. task == NULL will make it a kernel context. + */ +int cxl_start_context(struct cxl_context *ctx, u64 wed, + struct task_struct *task); +/* + * Stop a context and remove it from the PSL + */ +int cxl_stop_context(struct cxl_context *ctx); + +/* Reset the AFU */ +int cxl_afu_reset(struct cxl_context *ctx); + +/* + * Set a context as a master context. + * This sets the default problem space area mapped as the full space, rather + * than just the per context area (for slaves). + */ +void cxl_set_master(struct cxl_context *ctx); + +/* + * Map and unmap the AFU Problem Space area. The amount and location mapped + * depends on if this context is a master or slave. + */ +void __iomem *cxl_psa_map(struct cxl_context *ctx); +void cxl_psa_unmap(void __iomem *addr); + +/* Get the process element for this context */ +int cxl_process_element(struct cxl_context *ctx); + +/* + * These calls allow drivers to create their own file descriptors and make them + * identical to the cxl file descriptor user API. An example use case: + * + * struct file_operations cxl_my_fops = {}; + * ...... + * // Init the context + * ctx = cxl_dev_context_init(dev); + * if (IS_ERR(ctx)) + * return PTR_ERR(ctx); + * // Create and attach a new file descriptor to my file ops + * file = cxl_get_fd(ctx, &cxl_my_fops, &fd); + * // Start context + * rc = cxl_start_work(ctx, &work.work); + * if (rc) { + * fput(file); + * put_unused_fd(fd); + * return -ENODEV; + * } + * // No error paths after installing the fd + * fd_install(fd, file); + * return fd; + * + * This inits a context, and gets a file descriptor and associates some file + * ops to that file descriptor. If the file ops are blank, the cxl driver will + * fill them in with the default ones that mimic the standard user API. Once + * completed, the file descriptor can be installed. Once the file descriptor is + * installed, it's visible to the user so no errors must occur past this point. + * + * If cxl_fd_release() file op call is installed, the context will be stopped + * and released when the fd is released. Hence the driver won't need to manage + * this itself. + */ + +/* + * Take a context and associate it with my file ops. Returns the associated + * file and file descriptor. Any file ops which are blank are filled in by the + * cxl driver with the default ops to mimic the standard API. + */ +struct file *cxl_get_fd(struct cxl_context *ctx, struct file_operations *fops, + int *fd); +/* Get the context associated with this file */ +struct cxl_context *cxl_fops_get_context(struct file *file); +/* + * Start a context associated a struct cxl_ioctl_start_work used by the + * standard cxl user API. + */ +int cxl_start_work(struct cxl_context *ctx, + struct cxl_ioctl_start_work *work); +/* + * Export all the existing fops so drivers can use them + */ +int cxl_fd_open(struct inode *inode, struct file *file); +int cxl_fd_release(struct inode *inode, struct file *file); +long cxl_fd_ioctl(struct file *file, unsigned int cmd, unsigned long arg); +int cxl_fd_mmap(struct file *file, struct vm_area_struct *vm); +__poll_t cxl_fd_poll(struct file *file, struct poll_table_struct *poll); +ssize_t cxl_fd_read(struct file *file, char __user *buf, size_t count, + loff_t *off); + +/* + * For EEH, a driver may want to assert a PERST will reload the same image + * from flash into the FPGA. + * + * This is a property of the entire adapter, not a single AFU, so drivers + * should set this property with care! + */ +void cxl_perst_reloads_same_image(struct cxl_afu *afu, + bool perst_reloads_same_image); + +/* + * Read the VPD for the card where the AFU resides + */ +ssize_t cxl_read_adapter_vpd(struct pci_dev *dev, void *buf, size_t count); + +/* + * AFU driver ops allow an AFU driver to create their own events to pass to + * userspace through the file descriptor as a simpler alternative to overriding + * the read() and poll() calls that works with the generic cxl events. These + * events are given priority over the generic cxl events, so they will be + * delivered first if multiple types of events are pending. + * + * The AFU driver must call cxl_context_events_pending() to notify the cxl + * driver that new events are ready to be delivered for a specific context. + * cxl_context_events_pending() will adjust the current count of AFU driver + * events for this context, and wake up anyone waiting on the context wait + * queue. + * + * The cxl driver will then call fetch_event() to get a structure defining + * the size and address of the driver specific event data. The cxl driver + * will build a cxl header with type and process_element fields filled in, + * and header.size set to sizeof(struct cxl_event_header) + data_size. + * The total size of the event is limited to CXL_READ_MIN_SIZE (4K). + * + * fetch_event() is called with a spin lock held, so it must not sleep. + * + * The cxl driver will then deliver the event to userspace, and finally + * call event_delivered() to return the status of the operation, identified + * by cxl context and AFU driver event data pointers. + * 0 Success + * -EFAULT copy_to_user() has failed + * -EINVAL Event data pointer is NULL, or event size is greater than + * CXL_READ_MIN_SIZE. + */ +struct cxl_afu_driver_ops { + struct cxl_event_afu_driver_reserved *(*fetch_event) ( + struct cxl_context *ctx); + void (*event_delivered) (struct cxl_context *ctx, + struct cxl_event_afu_driver_reserved *event, + int rc); +}; + +/* + * Associate the above driver ops with a specific context. + * Reset the current count of AFU driver events. + */ +void cxl_set_driver_ops(struct cxl_context *ctx, + struct cxl_afu_driver_ops *ops); + +/* Notify cxl driver that new events are ready to be delivered for context */ +void cxl_context_events_pending(struct cxl_context *ctx, + unsigned int new_events); + +#endif /* _MISC_CXL_H */ diff --git a/include/misc/cxllib.h b/include/misc/cxllib.h new file mode 100644 index 0000000000..eacc417288 --- /dev/null +++ b/include/misc/cxllib.h @@ -0,0 +1,129 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright 2017 IBM Corp. + */ + +#ifndef _MISC_CXLLIB_H +#define _MISC_CXLLIB_H + +#include <linux/pci.h> +#include <asm/reg.h> + +/* + * cxl driver exports a in-kernel 'library' API which can be called by + * other drivers to help interacting with an IBM XSL. + */ + +/* + * tells whether capi is supported on the PCIe slot where the + * device is seated + * + * Input: + * dev: device whose slot needs to be checked + * flags: 0 for the time being + */ +bool cxllib_slot_is_supported(struct pci_dev *dev, unsigned long flags); + + +/* + * Returns the configuration parameters to be used by the XSL or device + * + * Input: + * dev: device, used to find PHB + * Output: + * struct cxllib_xsl_config: + * version + * capi BAR address, i.e. 0x2000000000000-0x2FFFFFFFFFFFF + * capi BAR size + * data send control (XSL_DSNCTL) + * dummy read address (XSL_DRA) + */ +#define CXL_XSL_CONFIG_VERSION1 1 +struct cxllib_xsl_config { + u32 version; /* format version for register encoding */ + u32 log_bar_size;/* log size of the capi_window */ + u64 bar_addr; /* address of the start of capi window */ + u64 dsnctl; /* matches definition of XSL_DSNCTL */ + u64 dra; /* real address that can be used for dummy read */ +}; + +int cxllib_get_xsl_config(struct pci_dev *dev, struct cxllib_xsl_config *cfg); + + +/* + * Activate capi for the pci host bridge associated with the device. + * Can be extended to deactivate once we know how to do it. + * Device must be ready to accept messages from the CAPP unit and + * respond accordingly (TLB invalidates, ...) + * + * PHB is switched to capi mode through calls to skiboot. + * CAPP snooping is activated + * + * Input: + * dev: device whose PHB should switch mode + * mode: mode to switch to i.e. CAPI or PCI + * flags: options related to the mode + */ +enum cxllib_mode { + CXL_MODE_CXL, + CXL_MODE_PCI, +}; + +#define CXL_MODE_NO_DMA 0 +#define CXL_MODE_DMA_TVT0 1 +#define CXL_MODE_DMA_TVT1 2 + +int cxllib_switch_phb_mode(struct pci_dev *dev, enum cxllib_mode mode, + unsigned long flags); + + +/* + * Set the device for capi DMA. + * Define its dma_ops and dma offset so that allocations will be using TVT#1 + * + * Input: + * dev: device to set + * flags: options. CXL_MODE_DMA_TVT1 should be used + */ +int cxllib_set_device_dma(struct pci_dev *dev, unsigned long flags); + + +/* + * Get the Process Element structure for the given thread + * + * Input: + * task: task_struct for the context of the translation + * translation_mode: whether addresses should be translated + * Output: + * attr: attributes to fill up the Process Element structure from CAIA + */ +struct cxllib_pe_attributes { + u64 sr; + u32 lpid; + u32 tid; + u32 pid; +}; +#define CXL_TRANSLATED_MODE 0 +#define CXL_REAL_MODE 1 + +int cxllib_get_PE_attributes(struct task_struct *task, + unsigned long translation_mode, struct cxllib_pe_attributes *attr); + + +/* + * Handle memory fault. + * Fault in all the pages of the specified buffer for the permissions + * provided in ‘flags’ + * + * Shouldn't be called from interrupt context + * + * Input: + * mm: struct mm for the thread faulting the pages + * addr: base address of the buffer to page in + * size: size of the buffer to page in + * flags: permission requested (DSISR_ISSTORE...) + */ +int cxllib_handle_fault(struct mm_struct *mm, u64 addr, u64 size, u64 flags); + + +#endif /* _MISC_CXLLIB_H */ diff --git a/include/misc/ocxl-config.h b/include/misc/ocxl-config.h new file mode 100644 index 0000000000..ccfd3b4635 --- /dev/null +++ b/include/misc/ocxl-config.h @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright 2017 IBM Corp. +#ifndef _OCXL_CONFIG_H_ +#define _OCXL_CONFIG_H_ + +/* + * This file lists the various constants used to read the + * configuration space of an opencapi adapter. + * + * It follows the specification for opencapi 3.0 + */ + +#define OCXL_EXT_CAP_ID_DVSEC 0x23 + +#define OCXL_DVSEC_VENDOR_OFFSET 0x4 +#define OCXL_DVSEC_ID_OFFSET 0x8 +#define OCXL_DVSEC_TL_ID 0xF000 +#define OCXL_DVSEC_TL_BACKOFF_TIMERS 0x10 +#define OCXL_DVSEC_TL_RECV_CAP 0x18 +#define OCXL_DVSEC_TL_SEND_CAP 0x20 +#define OCXL_DVSEC_TL_RECV_RATE 0x30 +#define OCXL_DVSEC_TL_SEND_RATE 0x50 +#define OCXL_DVSEC_FUNC_ID 0xF001 +#define OCXL_DVSEC_FUNC_OFF_INDEX 0x08 +#define OCXL_DVSEC_FUNC_OFF_ACTAG 0x0C +#define OCXL_DVSEC_AFU_INFO_ID 0xF003 +#define OCXL_DVSEC_AFU_INFO_AFU_IDX 0x0A +#define OCXL_DVSEC_AFU_INFO_OFF 0x0C +#define OCXL_DVSEC_AFU_INFO_DATA 0x10 +#define OCXL_DVSEC_AFU_CTRL_ID 0xF004 +#define OCXL_DVSEC_AFU_CTRL_AFU_IDX 0x0A +#define OCXL_DVSEC_AFU_CTRL_TERM_PASID 0x0C +#define OCXL_DVSEC_AFU_CTRL_ENABLE 0x0F +#define OCXL_DVSEC_AFU_CTRL_PASID_SUP 0x10 +#define OCXL_DVSEC_AFU_CTRL_PASID_EN 0x11 +#define OCXL_DVSEC_AFU_CTRL_PASID_BASE 0x14 +#define OCXL_DVSEC_AFU_CTRL_ACTAG_SUP 0x18 +#define OCXL_DVSEC_AFU_CTRL_ACTAG_EN 0x1A +#define OCXL_DVSEC_AFU_CTRL_ACTAG_BASE 0x1C +#define OCXL_DVSEC_VENDOR_ID 0xF0F0 +#define OCXL_DVSEC_VENDOR_CFG_VERS 0x0C +#define OCXL_DVSEC_VENDOR_TLX_VERS 0x10 +#define OCXL_DVSEC_VENDOR_DLX_VERS 0x20 +#define OCXL_DVSEC_VENDOR_RESET_RELOAD 0x38 + +#endif /* _OCXL_CONFIG_H_ */ diff --git a/include/misc/ocxl.h b/include/misc/ocxl.h new file mode 100644 index 0000000000..3ed736da02 --- /dev/null +++ b/include/misc/ocxl.h @@ -0,0 +1,471 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright 2017 IBM Corp. +#ifndef _MISC_OCXL_H_ +#define _MISC_OCXL_H_ + +#include <linux/pci.h> + +/* + * Opencapi drivers all need some common facilities, like parsing the + * device configuration space, adding a Process Element to the Shared + * Process Area, etc... + * + * The ocxl module provides a kernel API, to allow other drivers to + * reuse common code. A bit like a in-kernel library. + */ + +#define OCXL_AFU_NAME_SZ (24+1) /* add 1 for NULL termination */ + + +struct ocxl_afu_config { + u8 idx; + int dvsec_afu_control_pos; /* offset of AFU control DVSEC */ + char name[OCXL_AFU_NAME_SZ]; + u8 version_major; + u8 version_minor; + u8 afuc_type; + u8 afum_type; + u8 profile; + u8 global_mmio_bar; /* global MMIO area */ + u64 global_mmio_offset; + u32 global_mmio_size; + u8 pp_mmio_bar; /* per-process MMIO area */ + u64 pp_mmio_offset; + u32 pp_mmio_stride; + u64 lpc_mem_offset; + u64 lpc_mem_size; + u64 special_purpose_mem_offset; + u64 special_purpose_mem_size; + u8 pasid_supported_log; + u16 actag_supported; +}; + +struct ocxl_fn_config { + int dvsec_tl_pos; /* offset of the Transaction Layer DVSEC */ + int dvsec_function_pos; /* offset of the Function DVSEC */ + int dvsec_afu_info_pos; /* offset of the AFU information DVSEC */ + s8 max_pasid_log; + s8 max_afu_index; +}; + +enum ocxl_endian { + OCXL_BIG_ENDIAN = 0, /**< AFU data is big-endian */ + OCXL_LITTLE_ENDIAN = 1, /**< AFU data is little-endian */ + OCXL_HOST_ENDIAN = 2, /**< AFU data is the same endianness as the host */ +}; + +// These are opaque outside the ocxl driver +struct ocxl_afu; +struct ocxl_fn; +struct ocxl_context; + +// Device detection & initialisation + +/** + * ocxl_function_open() - Open an OpenCAPI function on an OpenCAPI device + * @dev: The PCI device that contains the function + * + * Returns an opaque pointer to the function, or an error pointer (check with IS_ERR) + */ +struct ocxl_fn *ocxl_function_open(struct pci_dev *dev); + +/** + * ocxl_function_afu_list() - Get the list of AFUs associated with a PCI function device + * Returns a list of struct ocxl_afu * + * + * @fn: The OpenCAPI function containing the AFUs + */ +struct list_head *ocxl_function_afu_list(struct ocxl_fn *fn); + +/** + * ocxl_function_fetch_afu() - Fetch an AFU instance from an OpenCAPI function + * @fn: The OpenCAPI function to get the AFU from + * @afu_idx: The index of the AFU to get + * + * If successful, the AFU should be released with ocxl_afu_put() + * + * Returns a pointer to the AFU, or NULL on error + */ +struct ocxl_afu *ocxl_function_fetch_afu(struct ocxl_fn *fn, u8 afu_idx); + +/** + * ocxl_afu_get() - Take a reference to an AFU + * @afu: The AFU to increment the reference count on + */ +void ocxl_afu_get(struct ocxl_afu *afu); + +/** + * ocxl_afu_put() - Release a reference to an AFU + * @afu: The AFU to decrement the reference count on + */ +void ocxl_afu_put(struct ocxl_afu *afu); + + +/** + * ocxl_function_config() - Get the configuration information for an OpenCAPI function + * @fn: The OpenCAPI function to get the config for + * + * Returns the function config, or NULL on error + */ +const struct ocxl_fn_config *ocxl_function_config(struct ocxl_fn *fn); + +/** + * ocxl_function_close() - Close an OpenCAPI function + * This will free any AFUs previously retrieved from the function, and + * detach and associated contexts. The contexts must by freed by the caller. + * + * @fn: The OpenCAPI function to close + * + */ +void ocxl_function_close(struct ocxl_fn *fn); + +// Context allocation + +/** + * ocxl_context_alloc() - Allocate an OpenCAPI context + * @context: The OpenCAPI context to allocate, must be freed with ocxl_context_free + * @afu: The AFU the context belongs to + * @mapping: The mapping to unmap when the context is closed (may be NULL) + */ +int ocxl_context_alloc(struct ocxl_context **context, struct ocxl_afu *afu, + struct address_space *mapping); + +/** + * ocxl_context_free() - Free an OpenCAPI context + * @ctx: The OpenCAPI context to free + */ +void ocxl_context_free(struct ocxl_context *ctx); + +/** + * ocxl_context_attach() - Grant access to an MM to an OpenCAPI context + * @ctx: The OpenCAPI context to attach + * @amr: The value of the AMR register to restrict access + * @mm: The mm to attach to the context + * + * Returns 0 on success, negative on failure + */ +int ocxl_context_attach(struct ocxl_context *ctx, u64 amr, + struct mm_struct *mm); + +/** + * ocxl_context_detach() - Detach an MM from an OpenCAPI context + * @ctx: The OpenCAPI context to attach + * + * Returns 0 on success, negative on failure + */ +int ocxl_context_detach(struct ocxl_context *ctx); + +// AFU IRQs + +/** + * ocxl_afu_irq_alloc() - Allocate an IRQ associated with an AFU context + * @ctx: the AFU context + * @irq_id: out, the IRQ ID + * + * Returns 0 on success, negative on failure + */ +int ocxl_afu_irq_alloc(struct ocxl_context *ctx, int *irq_id); + +/** + * ocxl_afu_irq_free() - Frees an IRQ associated with an AFU context + * @ctx: the AFU context + * @irq_id: the IRQ ID + * + * Returns 0 on success, negative on failure + */ +int ocxl_afu_irq_free(struct ocxl_context *ctx, int irq_id); + +/** + * ocxl_afu_irq_get_addr() - Gets the address of the trigger page for an IRQ + * This can then be provided to an AFU which will write to that + * page to trigger the IRQ. + * @ctx: The AFU context that the IRQ is associated with + * @irq_id: The IRQ ID + * + * returns the trigger page address, or 0 if the IRQ is not valid + */ +u64 ocxl_afu_irq_get_addr(struct ocxl_context *ctx, int irq_id); + +/** + * ocxl_irq_set_handler() - Provide a callback to be called when an IRQ is triggered + * @ctx: The AFU context that the IRQ is associated with + * @irq_id: The IRQ ID + * @handler: the callback to be called when the IRQ is triggered + * @free_private: the callback to be called when the IRQ is freed (may be NULL) + * @private: Private data to be passed to the callbacks + * + * Returns 0 on success, negative on failure + */ +int ocxl_irq_set_handler(struct ocxl_context *ctx, int irq_id, + irqreturn_t (*handler)(void *private), + void (*free_private)(void *private), + void *private); + +// AFU Metadata + +/** + * ocxl_afu_config() - Get a pointer to the config for an AFU + * @afu: a pointer to the AFU to get the config for + * + * Returns a pointer to the AFU config + */ +struct ocxl_afu_config *ocxl_afu_config(struct ocxl_afu *afu); + +/** + * ocxl_afu_set_private() - Assign opaque hardware specific information to an OpenCAPI AFU. + * @afu: The OpenCAPI AFU + * @private: the opaque hardware specific information to assign to the driver + */ +void ocxl_afu_set_private(struct ocxl_afu *afu, void *private); + +/** + * ocxl_afu_get_private() - Fetch the hardware specific information associated with + * an external OpenCAPI AFU. This may be consumed by an external OpenCAPI driver. + * @afu: The OpenCAPI AFU + * + * Returns the opaque pointer associated with the device, or NULL if not set + */ +void *ocxl_afu_get_private(struct ocxl_afu *afu); + +// Global MMIO +/** + * ocxl_global_mmio_read32() - Read a 32 bit value from global MMIO + * @afu: The AFU + * @offset: The Offset from the start of MMIO + * @endian: the endianness that the MMIO data is in + * @val: returns the value + * + * Returns 0 for success, negative on error + */ +int ocxl_global_mmio_read32(struct ocxl_afu *afu, size_t offset, + enum ocxl_endian endian, u32 *val); + +/** + * ocxl_global_mmio_read64() - Read a 64 bit value from global MMIO + * @afu: The AFU + * @offset: The Offset from the start of MMIO + * @endian: the endianness that the MMIO data is in + * @val: returns the value + * + * Returns 0 for success, negative on error + */ +int ocxl_global_mmio_read64(struct ocxl_afu *afu, size_t offset, + enum ocxl_endian endian, u64 *val); + +/** + * ocxl_global_mmio_write32() - Write a 32 bit value to global MMIO + * @afu: The AFU + * @offset: The Offset from the start of MMIO + * @endian: the endianness that the MMIO data is in + * @val: The value to write + * + * Returns 0 for success, negative on error + */ +int ocxl_global_mmio_write32(struct ocxl_afu *afu, size_t offset, + enum ocxl_endian endian, u32 val); + +/** + * ocxl_global_mmio_write64() - Write a 64 bit value to global MMIO + * @afu: The AFU + * @offset: The Offset from the start of MMIO + * @endian: the endianness that the MMIO data is in + * @val: The value to write + * + * Returns 0 for success, negative on error + */ +int ocxl_global_mmio_write64(struct ocxl_afu *afu, size_t offset, + enum ocxl_endian endian, u64 val); + +/** + * ocxl_global_mmio_set32() - Set bits in a 32 bit global MMIO register + * @afu: The AFU + * @offset: The Offset from the start of MMIO + * @endian: the endianness that the MMIO data is in + * @mask: a mask of the bits to set + * + * Returns 0 for success, negative on error + */ +int ocxl_global_mmio_set32(struct ocxl_afu *afu, size_t offset, + enum ocxl_endian endian, u32 mask); + +/** + * ocxl_global_mmio_set64() - Set bits in a 64 bit global MMIO register + * @afu: The AFU + * @offset: The Offset from the start of MMIO + * @endian: the endianness that the MMIO data is in + * @mask: a mask of the bits to set + * + * Returns 0 for success, negative on error + */ +int ocxl_global_mmio_set64(struct ocxl_afu *afu, size_t offset, + enum ocxl_endian endian, u64 mask); + +/** + * ocxl_global_mmio_clear32() - Set bits in a 32 bit global MMIO register + * @afu: The AFU + * @offset: The Offset from the start of MMIO + * @endian: the endianness that the MMIO data is in + * @mask: a mask of the bits to set + * + * Returns 0 for success, negative on error + */ +int ocxl_global_mmio_clear32(struct ocxl_afu *afu, size_t offset, + enum ocxl_endian endian, u32 mask); + +/** + * ocxl_global_mmio_clear64() - Set bits in a 64 bit global MMIO register + * @afu: The AFU + * @offset: The Offset from the start of MMIO + * @endian: the endianness that the MMIO data is in + * @mask: a mask of the bits to set + * + * Returns 0 for success, negative on error + */ +int ocxl_global_mmio_clear64(struct ocxl_afu *afu, size_t offset, + enum ocxl_endian endian, u64 mask); + +// Functions left here are for compatibility with the cxlflash driver + +/* + * Read the configuration space of a function for the AFU specified by + * the index 'afu_idx'. Fills in a ocxl_afu_config structure + */ +int ocxl_config_read_afu(struct pci_dev *dev, + struct ocxl_fn_config *fn, + struct ocxl_afu_config *afu, + u8 afu_idx); + +/* + * Tell an AFU, by writing in the configuration space, the PASIDs that + * it can use. Range starts at 'pasid_base' and its size is a multiple + * of 2 + * + * 'afu_control_offset' is the offset of the AFU control DVSEC which + * can be found in the function configuration + */ +void ocxl_config_set_afu_pasid(struct pci_dev *dev, + int afu_control_offset, + int pasid_base, u32 pasid_count_log); + +/* + * Get the actag configuration for the function: + * 'base' is the first actag value that can be used. + * 'enabled' it the number of actags available, starting from base. + * 'supported' is the total number of actags desired by all the AFUs + * of the function. + */ +int ocxl_config_get_actag_info(struct pci_dev *dev, + u16 *base, u16 *enabled, u16 *supported); + +/* + * Tell a function, by writing in the configuration space, the actags + * it can use. + * + * 'func_offset' is the offset of the Function DVSEC that can found in + * the function configuration + */ +void ocxl_config_set_actag(struct pci_dev *dev, int func_offset, + u32 actag_base, u32 actag_count); + +/* + * Tell an AFU, by writing in the configuration space, the actags it + * can use. + * + * 'afu_control_offset' is the offset of the AFU control DVSEC for the + * desired AFU. It can be found in the AFU configuration + */ +void ocxl_config_set_afu_actag(struct pci_dev *dev, + int afu_control_offset, + int actag_base, int actag_count); + +/* + * Enable/disable an AFU, by writing in the configuration space. + * + * 'afu_control_offset' is the offset of the AFU control DVSEC for the + * desired AFU. It can be found in the AFU configuration + */ +void ocxl_config_set_afu_state(struct pci_dev *dev, + int afu_control_offset, int enable); + +/* + * Set the Transaction Layer configuration in the configuration space. + * Only needed for function 0. + * + * It queries the host TL capabilities, find some common ground + * between the host and device, and set the Transaction Layer on both + * accordingly. + */ +int ocxl_config_set_TL(struct pci_dev *dev, int tl_dvsec); + +/* + * Request an AFU to terminate a PASID. + * Will return once the AFU has acked the request, or an error in case + * of timeout. + * + * The hardware can only terminate one PASID at a time, so caller must + * guarantee some kind of serialization. + * + * 'afu_control_offset' is the offset of the AFU control DVSEC for the + * desired AFU. It can be found in the AFU configuration + */ +int ocxl_config_terminate_pasid(struct pci_dev *dev, + int afu_control_offset, int pasid); + +/* + * Read the configuration space of a function and fill in a + * ocxl_fn_config structure with all the function details + */ +int ocxl_config_read_function(struct pci_dev *dev, + struct ocxl_fn_config *fn); + +/* + * Set up the opencapi link for the function. + * + * When called for the first time for a link, it sets up the Shared + * Process Area for the link and the interrupt handler to process + * translation faults. + * + * Returns a 'link handle' that should be used for further calls for + * the link + */ +int ocxl_link_setup(struct pci_dev *dev, int PE_mask, + void **link_handle); + +/* + * Remove the association between the function and its link. + */ +void ocxl_link_release(struct pci_dev *dev, void *link_handle); + +/* + * Add a Process Element to the Shared Process Area for a link. + * The process is defined by its PASID, pid, tid and its mm_struct. + * + * 'xsl_err_cb' is an optional callback if the driver wants to be + * notified when the translation fault interrupt handler detects an + * address error. + * 'xsl_err_data' is an argument passed to the above callback, if + * defined + */ +int ocxl_link_add_pe(void *link_handle, int pasid, u32 pidr, u32 tidr, + u64 amr, u16 bdf, struct mm_struct *mm, + void (*xsl_err_cb)(void *data, u64 addr, u64 dsisr), + void *xsl_err_data); + +/* + * Remove a Process Element from the Shared Process Area for a link + */ +int ocxl_link_remove_pe(void *link_handle, int pasid); + +/* + * Allocate an AFU interrupt associated to the link. + * + * 'hw_irq' is the hardware interrupt number + */ +int ocxl_link_irq_alloc(void *link_handle, int *hw_irq); + +/* + * Free a previously allocated AFU interrupt + */ +void ocxl_link_free_irq(void *link_handle, int hw_irq); + +#endif /* _MISC_OCXL_H_ */ |