diff options
Diffstat (limited to 'include/uapi/drm/i915_drm.h')
| -rw-r--r-- | include/uapi/drm/i915_drm.h | 3848 |
1 files changed, 3848 insertions, 0 deletions
diff --git a/include/uapi/drm/i915_drm.h b/include/uapi/drm/i915_drm.h new file mode 100644 index 0000000000..7000e5910a --- /dev/null +++ b/include/uapi/drm/i915_drm.h @@ -0,0 +1,3848 @@ +/* + * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas. + * All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation the rights to use, copy, modify, merge, publish, + * distribute, sub license, and/or sell copies of the Software, and to + * permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS + * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. + * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR + * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, + * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE + * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + */ + +#ifndef _UAPI_I915_DRM_H_ +#define _UAPI_I915_DRM_H_ + +#include "drm.h" + +#if defined(__cplusplus) +extern "C" { +#endif + +/* Please note that modifications to all structs defined here are + * subject to backwards-compatibility constraints. + */ + +/** + * DOC: uevents generated by i915 on it's device node + * + * I915_L3_PARITY_UEVENT - Generated when the driver receives a parity mismatch + * event from the gpu l3 cache. Additional information supplied is ROW, + * BANK, SUBBANK, SLICE of the affected cacheline. Userspace should keep + * track of these events and if a specific cache-line seems to have a + * persistent error remap it with the l3 remapping tool supplied in + * intel-gpu-tools. The value supplied with the event is always 1. + * + * I915_ERROR_UEVENT - Generated upon error detection, currently only via + * hangcheck. The error detection event is a good indicator of when things + * began to go badly. The value supplied with the event is a 1 upon error + * detection, and a 0 upon reset completion, signifying no more error + * exists. NOTE: Disabling hangcheck or reset via module parameter will + * cause the related events to not be seen. + * + * I915_RESET_UEVENT - Event is generated just before an attempt to reset the + * GPU. The value supplied with the event is always 1. NOTE: Disable + * reset via module parameter will cause this event to not be seen. + */ +#define I915_L3_PARITY_UEVENT "L3_PARITY_ERROR" +#define I915_ERROR_UEVENT "ERROR" +#define I915_RESET_UEVENT "RESET" + +/** + * struct i915_user_extension - Base class for defining a chain of extensions + * + * Many interfaces need to grow over time. In most cases we can simply + * extend the struct and have userspace pass in more data. Another option, + * as demonstrated by Vulkan's approach to providing extensions for forward + * and backward compatibility, is to use a list of optional structs to + * provide those extra details. + * + * The key advantage to using an extension chain is that it allows us to + * redefine the interface more easily than an ever growing struct of + * increasing complexity, and for large parts of that interface to be + * entirely optional. The downside is more pointer chasing; chasing across + * the __user boundary with pointers encapsulated inside u64. + * + * Example chaining: + * + * .. code-block:: C + * + * struct i915_user_extension ext3 { + * .next_extension = 0, // end + * .name = ..., + * }; + * struct i915_user_extension ext2 { + * .next_extension = (uintptr_t)&ext3, + * .name = ..., + * }; + * struct i915_user_extension ext1 { + * .next_extension = (uintptr_t)&ext2, + * .name = ..., + * }; + * + * Typically the struct i915_user_extension would be embedded in some uAPI + * struct, and in this case we would feed it the head of the chain(i.e ext1), + * which would then apply all of the above extensions. + * + */ +struct i915_user_extension { + /** + * @next_extension: + * + * Pointer to the next struct i915_user_extension, or zero if the end. + */ + __u64 next_extension; + /** + * @name: Name of the extension. + * + * Note that the name here is just some integer. + * + * Also note that the name space for this is not global for the whole + * driver, but rather its scope/meaning is limited to the specific piece + * of uAPI which has embedded the struct i915_user_extension. + */ + __u32 name; + /** + * @flags: MBZ + * + * All undefined bits must be zero. + */ + __u32 flags; + /** + * @rsvd: MBZ + * + * Reserved for future use; must be zero. + */ + __u32 rsvd[4]; +}; + +/* + * MOCS indexes used for GPU surfaces, defining the cacheability of the + * surface data and the coherency for this data wrt. CPU vs. GPU accesses. + */ +enum i915_mocs_table_index { + /* + * Not cached anywhere, coherency between CPU and GPU accesses is + * guaranteed. + */ + I915_MOCS_UNCACHED, + /* + * Cacheability and coherency controlled by the kernel automatically + * based on the DRM_I915_GEM_SET_CACHING IOCTL setting and the current + * usage of the surface (used for display scanout or not). + */ + I915_MOCS_PTE, + /* + * Cached in all GPU caches available on the platform. + * Coherency between CPU and GPU accesses to the surface is not + * guaranteed without extra synchronization. + */ + I915_MOCS_CACHED, +}; + +/** + * enum drm_i915_gem_engine_class - uapi engine type enumeration + * + * Different engines serve different roles, and there may be more than one + * engine serving each role. This enum provides a classification of the role + * of the engine, which may be used when requesting operations to be performed + * on a certain subset of engines, or for providing information about that + * group. + */ +enum drm_i915_gem_engine_class { + /** + * @I915_ENGINE_CLASS_RENDER: + * + * Render engines support instructions used for 3D, Compute (GPGPU), + * and programmable media workloads. These instructions fetch data and + * dispatch individual work items to threads that operate in parallel. + * The threads run small programs (called "kernels" or "shaders") on + * the GPU's execution units (EUs). + */ + I915_ENGINE_CLASS_RENDER = 0, + + /** + * @I915_ENGINE_CLASS_COPY: + * + * Copy engines (also referred to as "blitters") support instructions + * that move blocks of data from one location in memory to another, + * or that fill a specified location of memory with fixed data. + * Copy engines can perform pre-defined logical or bitwise operations + * on the source, destination, or pattern data. + */ + I915_ENGINE_CLASS_COPY = 1, + + /** + * @I915_ENGINE_CLASS_VIDEO: + * + * Video engines (also referred to as "bit stream decode" (BSD) or + * "vdbox") support instructions that perform fixed-function media + * decode and encode. + */ + I915_ENGINE_CLASS_VIDEO = 2, + + /** + * @I915_ENGINE_CLASS_VIDEO_ENHANCE: + * + * Video enhancement engines (also referred to as "vebox") support + * instructions related to image enhancement. + */ + I915_ENGINE_CLASS_VIDEO_ENHANCE = 3, + + /** + * @I915_ENGINE_CLASS_COMPUTE: + * + * Compute engines support a subset of the instructions available + * on render engines: compute engines support Compute (GPGPU) and + * programmable media workloads, but do not support the 3D pipeline. + */ + I915_ENGINE_CLASS_COMPUTE = 4, + + /* Values in this enum should be kept compact. */ + + /** + * @I915_ENGINE_CLASS_INVALID: + * + * Placeholder value to represent an invalid engine class assignment. + */ + I915_ENGINE_CLASS_INVALID = -1 +}; + +/** + * struct i915_engine_class_instance - Engine class/instance identifier + * + * There may be more than one engine fulfilling any role within the system. + * Each engine of a class is given a unique instance number and therefore + * any engine can be specified by its class:instance tuplet. APIs that allow + * access to any engine in the system will use struct i915_engine_class_instance + * for this identification. + */ +struct i915_engine_class_instance { + /** + * @engine_class: + * + * Engine class from enum drm_i915_gem_engine_class + */ + __u16 engine_class; +#define I915_ENGINE_CLASS_INVALID_NONE -1 +#define I915_ENGINE_CLASS_INVALID_VIRTUAL -2 + + /** + * @engine_instance: + * + * Engine instance. + */ + __u16 engine_instance; +}; + +/** + * DOC: perf_events exposed by i915 through /sys/bus/event_sources/drivers/i915 + * + */ + +enum drm_i915_pmu_engine_sample { + I915_SAMPLE_BUSY = 0, + I915_SAMPLE_WAIT = 1, + I915_SAMPLE_SEMA = 2 +}; + +#define I915_PMU_SAMPLE_BITS (4) +#define I915_PMU_SAMPLE_MASK (0xf) +#define I915_PMU_SAMPLE_INSTANCE_BITS (8) +#define I915_PMU_CLASS_SHIFT \ + (I915_PMU_SAMPLE_BITS + I915_PMU_SAMPLE_INSTANCE_BITS) + +#define __I915_PMU_ENGINE(class, instance, sample) \ + ((class) << I915_PMU_CLASS_SHIFT | \ + (instance) << I915_PMU_SAMPLE_BITS | \ + (sample)) + +#define I915_PMU_ENGINE_BUSY(class, instance) \ + __I915_PMU_ENGINE(class, instance, I915_SAMPLE_BUSY) + +#define I915_PMU_ENGINE_WAIT(class, instance) \ + __I915_PMU_ENGINE(class, instance, I915_SAMPLE_WAIT) + +#define I915_PMU_ENGINE_SEMA(class, instance) \ + __I915_PMU_ENGINE(class, instance, I915_SAMPLE_SEMA) + +/* + * Top 4 bits of every non-engine counter are GT id. + */ +#define __I915_PMU_GT_SHIFT (60) + +#define ___I915_PMU_OTHER(gt, x) \ + (((__u64)__I915_PMU_ENGINE(0xff, 0xff, 0xf) + 1 + (x)) | \ + ((__u64)(gt) << __I915_PMU_GT_SHIFT)) + +#define __I915_PMU_OTHER(x) ___I915_PMU_OTHER(0, x) + +#define I915_PMU_ACTUAL_FREQUENCY __I915_PMU_OTHER(0) +#define I915_PMU_REQUESTED_FREQUENCY __I915_PMU_OTHER(1) +#define I915_PMU_INTERRUPTS __I915_PMU_OTHER(2) +#define I915_PMU_RC6_RESIDENCY __I915_PMU_OTHER(3) +#define I915_PMU_SOFTWARE_GT_AWAKE_TIME __I915_PMU_OTHER(4) + +#define I915_PMU_LAST /* Deprecated - do not use */ I915_PMU_RC6_RESIDENCY + +#define __I915_PMU_ACTUAL_FREQUENCY(gt) ___I915_PMU_OTHER(gt, 0) +#define __I915_PMU_REQUESTED_FREQUENCY(gt) ___I915_PMU_OTHER(gt, 1) +#define __I915_PMU_INTERRUPTS(gt) ___I915_PMU_OTHER(gt, 2) +#define __I915_PMU_RC6_RESIDENCY(gt) ___I915_PMU_OTHER(gt, 3) +#define __I915_PMU_SOFTWARE_GT_AWAKE_TIME(gt) ___I915_PMU_OTHER(gt, 4) + +/* Each region is a minimum of 16k, and there are at most 255 of them. + */ +#define I915_NR_TEX_REGIONS 255 /* table size 2k - maximum due to use + * of chars for next/prev indices */ +#define I915_LOG_MIN_TEX_REGION_SIZE 14 + +typedef struct _drm_i915_init { + enum { + I915_INIT_DMA = 0x01, + I915_CLEANUP_DMA = 0x02, + I915_RESUME_DMA = 0x03 + } func; + unsigned int mmio_offset; + int sarea_priv_offset; + unsigned int ring_start; + unsigned int ring_end; + unsigned int ring_size; + unsigned int front_offset; + unsigned int back_offset; + unsigned int depth_offset; + unsigned int w; + unsigned int h; + unsigned int pitch; + unsigned int pitch_bits; + unsigned int back_pitch; + unsigned int depth_pitch; + unsigned int cpp; + unsigned int chipset; +} drm_i915_init_t; + +typedef struct _drm_i915_sarea { + struct drm_tex_region texList[I915_NR_TEX_REGIONS + 1]; + int last_upload; /* last time texture was uploaded */ + int last_enqueue; /* last time a buffer was enqueued */ + int last_dispatch; /* age of the most recently dispatched buffer */ + int ctxOwner; /* last context to upload state */ + int texAge; + int pf_enabled; /* is pageflipping allowed? */ + int pf_active; + int pf_current_page; /* which buffer is being displayed? */ + int perf_boxes; /* performance boxes to be displayed */ + int width, height; /* screen size in pixels */ + + drm_handle_t front_handle; + int front_offset; + int front_size; + + drm_handle_t back_handle; + int back_offset; + int back_size; + + drm_handle_t depth_handle; + int depth_offset; + int depth_size; + + drm_handle_t tex_handle; + int tex_offset; + int tex_size; + int log_tex_granularity; + int pitch; + int rotation; /* 0, 90, 180 or 270 */ + int rotated_offset; + int rotated_size; + int rotated_pitch; + int virtualX, virtualY; + + unsigned int front_tiled; + unsigned int back_tiled; + unsigned int depth_tiled; + unsigned int rotated_tiled; + unsigned int rotated2_tiled; + + int pipeA_x; + int pipeA_y; + int pipeA_w; + int pipeA_h; + int pipeB_x; + int pipeB_y; + int pipeB_w; + int pipeB_h; + + /* fill out some space for old userspace triple buffer */ + drm_handle_t unused_handle; + __u32 unused1, unused2, unused3; + + /* buffer object handles for static buffers. May change + * over the lifetime of the client. + */ + __u32 front_bo_handle; + __u32 back_bo_handle; + __u32 unused_bo_handle; + __u32 depth_bo_handle; + +} drm_i915_sarea_t; + +/* due to userspace building against these headers we need some compat here */ +#define planeA_x pipeA_x +#define planeA_y pipeA_y +#define planeA_w pipeA_w +#define planeA_h pipeA_h +#define planeB_x pipeB_x +#define planeB_y pipeB_y +#define planeB_w pipeB_w +#define planeB_h pipeB_h + +/* Flags for perf_boxes + */ +#define I915_BOX_RING_EMPTY 0x1 +#define I915_BOX_FLIP 0x2 +#define I915_BOX_WAIT 0x4 +#define I915_BOX_TEXTURE_LOAD 0x8 +#define I915_BOX_LOST_CONTEXT 0x10 + +/* + * i915 specific ioctls. + * + * The device specific ioctl range is [DRM_COMMAND_BASE, DRM_COMMAND_END) ie + * [0x40, 0xa0) (a0 is excluded). The numbers below are defined as offset + * against DRM_COMMAND_BASE and should be between [0x0, 0x60). + */ +#define DRM_I915_INIT 0x00 +#define DRM_I915_FLUSH 0x01 +#define DRM_I915_FLIP 0x02 +#define DRM_I915_BATCHBUFFER 0x03 +#define DRM_I915_IRQ_EMIT 0x04 +#define DRM_I915_IRQ_WAIT 0x05 +#define DRM_I915_GETPARAM 0x06 +#define DRM_I915_SETPARAM 0x07 +#define DRM_I915_ALLOC 0x08 +#define DRM_I915_FREE 0x09 +#define DRM_I915_INIT_HEAP 0x0a +#define DRM_I915_CMDBUFFER 0x0b +#define DRM_I915_DESTROY_HEAP 0x0c +#define DRM_I915_SET_VBLANK_PIPE 0x0d +#define DRM_I915_GET_VBLANK_PIPE 0x0e +#define DRM_I915_VBLANK_SWAP 0x0f +#define DRM_I915_HWS_ADDR 0x11 +#define DRM_I915_GEM_INIT 0x13 +#define DRM_I915_GEM_EXECBUFFER 0x14 +#define DRM_I915_GEM_PIN 0x15 +#define DRM_I915_GEM_UNPIN 0x16 +#define DRM_I915_GEM_BUSY 0x17 +#define DRM_I915_GEM_THROTTLE 0x18 +#define DRM_I915_GEM_ENTERVT 0x19 +#define DRM_I915_GEM_LEAVEVT 0x1a +#define DRM_I915_GEM_CREATE 0x1b +#define DRM_I915_GEM_PREAD 0x1c +#define DRM_I915_GEM_PWRITE 0x1d +#define DRM_I915_GEM_MMAP 0x1e +#define DRM_I915_GEM_SET_DOMAIN 0x1f +#define DRM_I915_GEM_SW_FINISH 0x20 +#define DRM_I915_GEM_SET_TILING 0x21 +#define DRM_I915_GEM_GET_TILING 0x22 +#define DRM_I915_GEM_GET_APERTURE 0x23 +#define DRM_I915_GEM_MMAP_GTT 0x24 +#define DRM_I915_GET_PIPE_FROM_CRTC_ID 0x25 +#define DRM_I915_GEM_MADVISE 0x26 +#define DRM_I915_OVERLAY_PUT_IMAGE 0x27 +#define DRM_I915_OVERLAY_ATTRS 0x28 +#define DRM_I915_GEM_EXECBUFFER2 0x29 +#define DRM_I915_GEM_EXECBUFFER2_WR DRM_I915_GEM_EXECBUFFER2 +#define DRM_I915_GET_SPRITE_COLORKEY 0x2a +#define DRM_I915_SET_SPRITE_COLORKEY 0x2b +#define DRM_I915_GEM_WAIT 0x2c +#define DRM_I915_GEM_CONTEXT_CREATE 0x2d +#define DRM_I915_GEM_CONTEXT_DESTROY 0x2e +#define DRM_I915_GEM_SET_CACHING 0x2f +#define DRM_I915_GEM_GET_CACHING 0x30 +#define DRM_I915_REG_READ 0x31 +#define DRM_I915_GET_RESET_STATS 0x32 +#define DRM_I915_GEM_USERPTR 0x33 +#define DRM_I915_GEM_CONTEXT_GETPARAM 0x34 +#define DRM_I915_GEM_CONTEXT_SETPARAM 0x35 +#define DRM_I915_PERF_OPEN 0x36 +#define DRM_I915_PERF_ADD_CONFIG 0x37 +#define DRM_I915_PERF_REMOVE_CONFIG 0x38 +#define DRM_I915_QUERY 0x39 +#define DRM_I915_GEM_VM_CREATE 0x3a +#define DRM_I915_GEM_VM_DESTROY 0x3b +#define DRM_I915_GEM_CREATE_EXT 0x3c +/* Must be kept compact -- no holes */ + +#define DRM_IOCTL_I915_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t) +#define DRM_IOCTL_I915_FLUSH DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH) +#define DRM_IOCTL_I915_FLIP DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLIP) +#define DRM_IOCTL_I915_BATCHBUFFER DRM_IOW( DRM_COMMAND_BASE + DRM_I915_BATCHBUFFER, drm_i915_batchbuffer_t) +#define DRM_IOCTL_I915_IRQ_EMIT DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_IRQ_EMIT, drm_i915_irq_emit_t) +#define DRM_IOCTL_I915_IRQ_WAIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_IRQ_WAIT, drm_i915_irq_wait_t) +#define DRM_IOCTL_I915_GETPARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GETPARAM, drm_i915_getparam_t) +#define DRM_IOCTL_I915_SETPARAM DRM_IOW( DRM_COMMAND_BASE + DRM_I915_SETPARAM, drm_i915_setparam_t) +#define DRM_IOCTL_I915_ALLOC DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_ALLOC, drm_i915_mem_alloc_t) +#define DRM_IOCTL_I915_FREE DRM_IOW( DRM_COMMAND_BASE + DRM_I915_FREE, drm_i915_mem_free_t) +#define DRM_IOCTL_I915_INIT_HEAP DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT_HEAP, drm_i915_mem_init_heap_t) +#define DRM_IOCTL_I915_CMDBUFFER DRM_IOW( DRM_COMMAND_BASE + DRM_I915_CMDBUFFER, drm_i915_cmdbuffer_t) +#define DRM_IOCTL_I915_DESTROY_HEAP DRM_IOW( DRM_COMMAND_BASE + DRM_I915_DESTROY_HEAP, drm_i915_mem_destroy_heap_t) +#define DRM_IOCTL_I915_SET_VBLANK_PIPE DRM_IOW( DRM_COMMAND_BASE + DRM_I915_SET_VBLANK_PIPE, drm_i915_vblank_pipe_t) +#define DRM_IOCTL_I915_GET_VBLANK_PIPE DRM_IOR( DRM_COMMAND_BASE + DRM_I915_GET_VBLANK_PIPE, drm_i915_vblank_pipe_t) +#define DRM_IOCTL_I915_VBLANK_SWAP DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_VBLANK_SWAP, drm_i915_vblank_swap_t) +#define DRM_IOCTL_I915_HWS_ADDR DRM_IOW(DRM_COMMAND_BASE + DRM_I915_HWS_ADDR, struct drm_i915_gem_init) +#define DRM_IOCTL_I915_GEM_INIT DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_INIT, struct drm_i915_gem_init) +#define DRM_IOCTL_I915_GEM_EXECBUFFER DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_EXECBUFFER, struct drm_i915_gem_execbuffer) +#define DRM_IOCTL_I915_GEM_EXECBUFFER2 DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_EXECBUFFER2, struct drm_i915_gem_execbuffer2) +#define DRM_IOCTL_I915_GEM_EXECBUFFER2_WR DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_EXECBUFFER2_WR, struct drm_i915_gem_execbuffer2) +#define DRM_IOCTL_I915_GEM_PIN DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_PIN, struct drm_i915_gem_pin) +#define DRM_IOCTL_I915_GEM_UNPIN DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_UNPIN, struct drm_i915_gem_unpin) +#define DRM_IOCTL_I915_GEM_BUSY DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_BUSY, struct drm_i915_gem_busy) +#define DRM_IOCTL_I915_GEM_SET_CACHING DRM_IOW(DRM_COMMAND_BASE + DRM_I915_GEM_SET_CACHING, struct drm_i915_gem_caching) +#define DRM_IOCTL_I915_GEM_GET_CACHING DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_GET_CACHING, struct drm_i915_gem_caching) +#define DRM_IOCTL_I915_GEM_THROTTLE DRM_IO ( DRM_COMMAND_BASE + DRM_I915_GEM_THROTTLE) +#define DRM_IOCTL_I915_GEM_ENTERVT DRM_IO(DRM_COMMAND_BASE + DRM_I915_GEM_ENTERVT) +#define DRM_IOCTL_I915_GEM_LEAVEVT DRM_IO(DRM_COMMAND_BASE + DRM_I915_GEM_LEAVEVT) +#define DRM_IOCTL_I915_GEM_CREATE DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_CREATE, struct drm_i915_gem_create) +#define DRM_IOCTL_I915_GEM_CREATE_EXT DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_CREATE_EXT, struct drm_i915_gem_create_ext) +#define DRM_IOCTL_I915_GEM_PREAD DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_PREAD, struct drm_i915_gem_pread) +#define DRM_IOCTL_I915_GEM_PWRITE DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_PWRITE, struct drm_i915_gem_pwrite) +#define DRM_IOCTL_I915_GEM_MMAP DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_MMAP, struct drm_i915_gem_mmap) +#define DRM_IOCTL_I915_GEM_MMAP_GTT DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_MMAP_GTT, struct drm_i915_gem_mmap_gtt) +#define DRM_IOCTL_I915_GEM_MMAP_OFFSET DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_MMAP_GTT, struct drm_i915_gem_mmap_offset) +#define DRM_IOCTL_I915_GEM_SET_DOMAIN DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_SET_DOMAIN, struct drm_i915_gem_set_domain) +#define DRM_IOCTL_I915_GEM_SW_FINISH DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_SW_FINISH, struct drm_i915_gem_sw_finish) +#define DRM_IOCTL_I915_GEM_SET_TILING DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_SET_TILING, struct drm_i915_gem_set_tiling) +#define DRM_IOCTL_I915_GEM_GET_TILING DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_GET_TILING, struct drm_i915_gem_get_tiling) +#define DRM_IOCTL_I915_GEM_GET_APERTURE DRM_IOR (DRM_COMMAND_BASE + DRM_I915_GEM_GET_APERTURE, struct drm_i915_gem_get_aperture) +#define DRM_IOCTL_I915_GET_PIPE_FROM_CRTC_ID DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GET_PIPE_FROM_CRTC_ID, struct drm_i915_get_pipe_from_crtc_id) +#define DRM_IOCTL_I915_GEM_MADVISE DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_MADVISE, struct drm_i915_gem_madvise) +#define DRM_IOCTL_I915_OVERLAY_PUT_IMAGE DRM_IOW(DRM_COMMAND_BASE + DRM_I915_OVERLAY_PUT_IMAGE, struct drm_intel_overlay_put_image) +#define DRM_IOCTL_I915_OVERLAY_ATTRS DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_OVERLAY_ATTRS, struct drm_intel_overlay_attrs) +#define DRM_IOCTL_I915_SET_SPRITE_COLORKEY DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_SET_SPRITE_COLORKEY, struct drm_intel_sprite_colorkey) +#define DRM_IOCTL_I915_GET_SPRITE_COLORKEY DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GET_SPRITE_COLORKEY, struct drm_intel_sprite_colorkey) +#define DRM_IOCTL_I915_GEM_WAIT DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_WAIT, struct drm_i915_gem_wait) +#define DRM_IOCTL_I915_GEM_CONTEXT_CREATE DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_CONTEXT_CREATE, struct drm_i915_gem_context_create) +#define DRM_IOCTL_I915_GEM_CONTEXT_CREATE_EXT DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_CONTEXT_CREATE, struct drm_i915_gem_context_create_ext) +#define DRM_IOCTL_I915_GEM_CONTEXT_DESTROY DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_CONTEXT_DESTROY, struct drm_i915_gem_context_destroy) +#define DRM_IOCTL_I915_REG_READ DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_REG_READ, struct drm_i915_reg_read) +#define DRM_IOCTL_I915_GET_RESET_STATS DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GET_RESET_STATS, struct drm_i915_reset_stats) +#define DRM_IOCTL_I915_GEM_USERPTR DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_USERPTR, struct drm_i915_gem_userptr) +#define DRM_IOCTL_I915_GEM_CONTEXT_GETPARAM DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_CONTEXT_GETPARAM, struct drm_i915_gem_context_param) +#define DRM_IOCTL_I915_GEM_CONTEXT_SETPARAM DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_CONTEXT_SETPARAM, struct drm_i915_gem_context_param) +#define DRM_IOCTL_I915_PERF_OPEN DRM_IOW(DRM_COMMAND_BASE + DRM_I915_PERF_OPEN, struct drm_i915_perf_open_param) +#define DRM_IOCTL_I915_PERF_ADD_CONFIG DRM_IOW(DRM_COMMAND_BASE + DRM_I915_PERF_ADD_CONFIG, struct drm_i915_perf_oa_config) +#define DRM_IOCTL_I915_PERF_REMOVE_CONFIG DRM_IOW(DRM_COMMAND_BASE + DRM_I915_PERF_REMOVE_CONFIG, __u64) +#define DRM_IOCTL_I915_QUERY DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_QUERY, struct drm_i915_query) +#define DRM_IOCTL_I915_GEM_VM_CREATE DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_VM_CREATE, struct drm_i915_gem_vm_control) +#define DRM_IOCTL_I915_GEM_VM_DESTROY DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_VM_DESTROY, struct drm_i915_gem_vm_control) + +/* Allow drivers to submit batchbuffers directly to hardware, relying + * on the security mechanisms provided by hardware. + */ +typedef struct drm_i915_batchbuffer { + int start; /* agp offset */ + int used; /* nr bytes in use */ + int DR1; /* hw flags for GFX_OP_DRAWRECT_INFO */ + int DR4; /* window origin for GFX_OP_DRAWRECT_INFO */ + int num_cliprects; /* mulitpass with multiple cliprects? */ + struct drm_clip_rect __user *cliprects; /* pointer to userspace cliprects */ +} drm_i915_batchbuffer_t; + +/* As above, but pass a pointer to userspace buffer which can be + * validated by the kernel prior to sending to hardware. + */ +typedef struct _drm_i915_cmdbuffer { + char __user *buf; /* pointer to userspace command buffer */ + int sz; /* nr bytes in buf */ + int DR1; /* hw flags for GFX_OP_DRAWRECT_INFO */ + int DR4; /* window origin for GFX_OP_DRAWRECT_INFO */ + int num_cliprects; /* mulitpass with multiple cliprects? */ + struct drm_clip_rect __user *cliprects; /* pointer to userspace cliprects */ +} drm_i915_cmdbuffer_t; + +/* Userspace can request & wait on irq's: + */ +typedef struct drm_i915_irq_emit { + int __user *irq_seq; +} drm_i915_irq_emit_t; + +typedef struct drm_i915_irq_wait { + int irq_seq; +} drm_i915_irq_wait_t; + +/* + * Different modes of per-process Graphics Translation Table, + * see I915_PARAM_HAS_ALIASING_PPGTT + */ +#define I915_GEM_PPGTT_NONE 0 +#define I915_GEM_PPGTT_ALIASING 1 +#define I915_GEM_PPGTT_FULL 2 + +/* Ioctl to query kernel params: + */ +#define I915_PARAM_IRQ_ACTIVE 1 +#define I915_PARAM_ALLOW_BATCHBUFFER 2 +#define I915_PARAM_LAST_DISPATCH 3 +#define I915_PARAM_CHIPSET_ID 4 +#define I915_PARAM_HAS_GEM 5 +#define I915_PARAM_NUM_FENCES_AVAIL 6 +#define I915_PARAM_HAS_OVERLAY 7 +#define I915_PARAM_HAS_PAGEFLIPPING 8 +#define I915_PARAM_HAS_EXECBUF2 9 +#define I915_PARAM_HAS_BSD 10 +#define I915_PARAM_HAS_BLT 11 +#define I915_PARAM_HAS_RELAXED_FENCING 12 +#define I915_PARAM_HAS_COHERENT_RINGS 13 +#define I915_PARAM_HAS_EXEC_CONSTANTS 14 +#define I915_PARAM_HAS_RELAXED_DELTA 15 +#define I915_PARAM_HAS_GEN7_SOL_RESET 16 +#define I915_PARAM_HAS_LLC 17 +#define I915_PARAM_HAS_ALIASING_PPGTT 18 +#define I915_PARAM_HAS_WAIT_TIMEOUT 19 +#define I915_PARAM_HAS_SEMAPHORES 20 +#define I915_PARAM_HAS_PRIME_VMAP_FLUSH 21 +#define I915_PARAM_HAS_VEBOX 22 +#define I915_PARAM_HAS_SECURE_BATCHES 23 +#define I915_PARAM_HAS_PINNED_BATCHES 24 +#define I915_PARAM_HAS_EXEC_NO_RELOC 25 +#define I915_PARAM_HAS_EXEC_HANDLE_LUT 26 +#define I915_PARAM_HAS_WT 27 +#define I915_PARAM_CMD_PARSER_VERSION 28 +#define I915_PARAM_HAS_COHERENT_PHYS_GTT 29 +#define I915_PARAM_MMAP_VERSION 30 +#define I915_PARAM_HAS_BSD2 31 +#define I915_PARAM_REVISION 32 +#define I915_PARAM_SUBSLICE_TOTAL 33 +#define I915_PARAM_EU_TOTAL 34 +#define I915_PARAM_HAS_GPU_RESET 35 +#define I915_PARAM_HAS_RESOURCE_STREAMER 36 +#define I915_PARAM_HAS_EXEC_SOFTPIN 37 +#define I915_PARAM_HAS_POOLED_EU 38 +#define I915_PARAM_MIN_EU_IN_POOL 39 +#define I915_PARAM_MMAP_GTT_VERSION 40 + +/* + * Query whether DRM_I915_GEM_EXECBUFFER2 supports user defined execution + * priorities and the driver will attempt to execute batches in priority order. + * The param returns a capability bitmask, nonzero implies that the scheduler + * is enabled, with different features present according to the mask. + * + * The initial priority for each batch is supplied by the context and is + * controlled via I915_CONTEXT_PARAM_PRIORITY. + */ +#define I915_PARAM_HAS_SCHEDULER 41 +#define I915_SCHEDULER_CAP_ENABLED (1ul << 0) +#define I915_SCHEDULER_CAP_PRIORITY (1ul << 1) +#define I915_SCHEDULER_CAP_PREEMPTION (1ul << 2) +#define I915_SCHEDULER_CAP_SEMAPHORES (1ul << 3) +#define I915_SCHEDULER_CAP_ENGINE_BUSY_STATS (1ul << 4) +/* + * Indicates the 2k user priority levels are statically mapped into 3 buckets as + * follows: + * + * -1k to -1 Low priority + * 0 Normal priority + * 1 to 1k Highest priority + */ +#define I915_SCHEDULER_CAP_STATIC_PRIORITY_MAP (1ul << 5) + +/* + * Query the status of HuC load. + * + * The query can fail in the following scenarios with the listed error codes: + * -ENODEV if HuC is not present on this platform, + * -EOPNOTSUPP if HuC firmware usage is disabled, + * -ENOPKG if HuC firmware fetch failed, + * -ENOEXEC if HuC firmware is invalid or mismatched, + * -ENOMEM if i915 failed to prepare the FW objects for transfer to the uC, + * -EIO if the FW transfer or the FW authentication failed. + * + * If the IOCTL is successful, the returned parameter will be set to one of the + * following values: + * * 0 if HuC firmware load is not complete, + * * 1 if HuC firmware is loaded and fully authenticated, + * * 2 if HuC firmware is loaded and authenticated for clear media only + */ +#define I915_PARAM_HUC_STATUS 42 + +/* Query whether DRM_I915_GEM_EXECBUFFER2 supports the ability to opt-out of + * synchronisation with implicit fencing on individual objects. + * See EXEC_OBJECT_ASYNC. + */ +#define I915_PARAM_HAS_EXEC_ASYNC 43 + +/* Query whether DRM_I915_GEM_EXECBUFFER2 supports explicit fence support - + * both being able to pass in a sync_file fd to wait upon before executing, + * and being able to return a new sync_file fd that is signaled when the + * current request is complete. See I915_EXEC_FENCE_IN and I915_EXEC_FENCE_OUT. + */ +#define I915_PARAM_HAS_EXEC_FENCE 44 + +/* Query whether DRM_I915_GEM_EXECBUFFER2 supports the ability to capture + * user specified bufffers for post-mortem debugging of GPU hangs. See + * EXEC_OBJECT_CAPTURE. + */ +#define I915_PARAM_HAS_EXEC_CAPTURE 45 + +#define I915_PARAM_SLICE_MASK 46 + +/* Assuming it's uniform for each slice, this queries the mask of subslices + * per-slice for this system. + */ +#define I915_PARAM_SUBSLICE_MASK 47 + +/* + * Query whether DRM_I915_GEM_EXECBUFFER2 supports supplying the batch buffer + * as the first execobject as opposed to the last. See I915_EXEC_BATCH_FIRST. + */ +#define I915_PARAM_HAS_EXEC_BATCH_FIRST 48 + +/* Query whether DRM_I915_GEM_EXECBUFFER2 supports supplying an array of + * drm_i915_gem_exec_fence structures. See I915_EXEC_FENCE_ARRAY. + */ +#define I915_PARAM_HAS_EXEC_FENCE_ARRAY 49 + +/* + * Query whether every context (both per-file default and user created) is + * isolated (insofar as HW supports). If this parameter is not true, then + * freshly created contexts may inherit values from an existing context, + * rather than default HW values. If true, it also ensures (insofar as HW + * supports) that all state set by this context will not leak to any other + * context. + * + * As not every engine across every gen support contexts, the returned + * value reports the support of context isolation for individual engines by + * returning a bitmask of each engine class set to true if that class supports + * isolation. + */ +#define I915_PARAM_HAS_CONTEXT_ISOLATION 50 + +/* Frequency of the command streamer timestamps given by the *_TIMESTAMP + * registers. This used to be fixed per platform but from CNL onwards, this + * might vary depending on the parts. + */ +#define I915_PARAM_CS_TIMESTAMP_FREQUENCY 51 + +/* + * Once upon a time we supposed that writes through the GGTT would be + * immediately in physical memory (once flushed out of the CPU path). However, + * on a few different processors and chipsets, this is not necessarily the case + * as the writes appear to be buffered internally. Thus a read of the backing + * storage (physical memory) via a different path (with different physical tags + * to the indirect write via the GGTT) will see stale values from before + * the GGTT write. Inside the kernel, we can for the most part keep track of + * the different read/write domains in use (e.g. set-domain), but the assumption + * of coherency is baked into the ABI, hence reporting its true state in this + * parameter. + * + * Reports true when writes via mmap_gtt are immediately visible following an + * lfence to flush the WCB. + * + * Reports false when writes via mmap_gtt are indeterminately delayed in an in + * internal buffer and are _not_ immediately visible to third parties accessing + * directly via mmap_cpu/mmap_wc. Use of mmap_gtt as part of an IPC + * communications channel when reporting false is strongly disadvised. + */ +#define I915_PARAM_MMAP_GTT_COHERENT 52 + +/* + * Query whether DRM_I915_GEM_EXECBUFFER2 supports coordination of parallel + * execution through use of explicit fence support. + * See I915_EXEC_FENCE_OUT and I915_EXEC_FENCE_SUBMIT. + */ +#define I915_PARAM_HAS_EXEC_SUBMIT_FENCE 53 + +/* + * Revision of the i915-perf uAPI. The value returned helps determine what + * i915-perf features are available. See drm_i915_perf_property_id. + */ +#define I915_PARAM_PERF_REVISION 54 + +/* Query whether DRM_I915_GEM_EXECBUFFER2 supports supplying an array of + * timeline syncobj through drm_i915_gem_execbuffer_ext_timeline_fences. See + * I915_EXEC_USE_EXTENSIONS. + */ +#define I915_PARAM_HAS_EXEC_TIMELINE_FENCES 55 + +/* Query if the kernel supports the I915_USERPTR_PROBE flag. */ +#define I915_PARAM_HAS_USERPTR_PROBE 56 + +/* + * Frequency of the timestamps in OA reports. This used to be the same as the CS + * timestamp frequency, but differs on some platforms. + */ +#define I915_PARAM_OA_TIMESTAMP_FREQUENCY 57 + +/* + * Query the status of PXP support in i915. + * + * The query can fail in the following scenarios with the listed error codes: + * -ENODEV = PXP support is not available on the GPU device or in the + * kernel due to missing component drivers or kernel configs. + * + * If the IOCTL is successful, the returned parameter will be set to one of + * the following values: + * 1 = PXP feature is supported and is ready for use. + * 2 = PXP feature is supported but should be ready soon (pending + * initialization of non-i915 system dependencies). + * + * NOTE: When param is supported (positive return values), user space should + * still refer to the GEM PXP context-creation UAPI header specs to be + * aware of possible failure due to system state machine at the time. + */ +#define I915_PARAM_PXP_STATUS 58 + +/* Must be kept compact -- no holes and well documented */ + +/** + * struct drm_i915_getparam - Driver parameter query structure. + */ +struct drm_i915_getparam { + /** @param: Driver parameter to query. */ + __s32 param; + + /** + * @value: Address of memory where queried value should be put. + * + * WARNING: Using pointers instead of fixed-size u64 means we need to write + * compat32 code. Don't repeat this mistake. + */ + int __user *value; +}; + +/** + * typedef drm_i915_getparam_t - Driver parameter query structure. + * See struct drm_i915_getparam. + */ +typedef struct drm_i915_getparam drm_i915_getparam_t; + +/* Ioctl to set kernel params: + */ +#define I915_SETPARAM_USE_MI_BATCHBUFFER_START 1 +#define I915_SETPARAM_TEX_LRU_LOG_GRANULARITY 2 +#define I915_SETPARAM_ALLOW_BATCHBUFFER 3 +#define I915_SETPARAM_NUM_USED_FENCES 4 +/* Must be kept compact -- no holes */ + +typedef struct drm_i915_setparam { + int param; + int value; +} drm_i915_setparam_t; + +/* A memory manager for regions of shared memory: + */ +#define I915_MEM_REGION_AGP 1 + +typedef struct drm_i915_mem_alloc { + int region; + int alignment; + int size; + int __user *region_offset; /* offset from start of fb or agp */ +} drm_i915_mem_alloc_t; + +typedef struct drm_i915_mem_free { + int region; + int region_offset; +} drm_i915_mem_free_t; + +typedef struct drm_i915_mem_init_heap { + int region; + int size; + int start; +} drm_i915_mem_init_heap_t; + +/* Allow memory manager to be torn down and re-initialized (eg on + * rotate): + */ +typedef struct drm_i915_mem_destroy_heap { + int region; +} drm_i915_mem_destroy_heap_t; + +/* Allow X server to configure which pipes to monitor for vblank signals + */ +#define DRM_I915_VBLANK_PIPE_A 1 +#define DRM_I915_VBLANK_PIPE_B 2 + +typedef struct drm_i915_vblank_pipe { + int pipe; +} drm_i915_vblank_pipe_t; + +/* Schedule buffer swap at given vertical blank: + */ +typedef struct drm_i915_vblank_swap { + drm_drawable_t drawable; + enum drm_vblank_seq_type seqtype; + unsigned int sequence; +} drm_i915_vblank_swap_t; + +typedef struct drm_i915_hws_addr { + __u64 addr; +} drm_i915_hws_addr_t; + +struct drm_i915_gem_init { + /** + * Beginning offset in the GTT to be managed by the DRM memory + * manager. + */ + __u64 gtt_start; + /** + * Ending offset in the GTT to be managed by the DRM memory + * manager. + */ + __u64 gtt_end; +}; + +struct drm_i915_gem_create { + /** + * Requested size for the object. + * + * The (page-aligned) allocated size for the object will be returned. + */ + __u64 size; + /** + * Returned handle for the object. + * + * Object handles are nonzero. + */ + __u32 handle; + __u32 pad; +}; + +struct drm_i915_gem_pread { + /** Handle for the object being read. */ + __u32 handle; + __u32 pad; + /** Offset into the object to read from */ + __u64 offset; + /** Length of data to read */ + __u64 size; + /** + * Pointer to write the data into. + * + * This is a fixed-size type for 32/64 compatibility. + */ + __u64 data_ptr; +}; + +struct drm_i915_gem_pwrite { + /** Handle for the object being written to. */ + __u32 handle; + __u32 pad; + /** Offset into the object to write to */ + __u64 offset; + /** Length of data to write */ + __u64 size; + /** + * Pointer to read the data from. + * + * This is a fixed-size type for 32/64 compatibility. + */ + __u64 data_ptr; +}; + +struct drm_i915_gem_mmap { + /** Handle for the object being mapped. */ + __u32 handle; + __u32 pad; + /** Offset in the object to map. */ + __u64 offset; + /** + * Length of data to map. + * + * The value will be page-aligned. + */ + __u64 size; + /** + * Returned pointer the data was mapped at. + * + * This is a fixed-size type for 32/64 compatibility. + */ + __u64 addr_ptr; + + /** + * Flags for extended behaviour. + * + * Added in version 2. + */ + __u64 flags; +#define I915_MMAP_WC 0x1 +}; + +struct drm_i915_gem_mmap_gtt { + /** Handle for the object being mapped. */ + __u32 handle; + __u32 pad; + /** + * Fake offset to use for subsequent mmap call + * + * This is a fixed-size type for 32/64 compatibility. + */ + __u64 offset; +}; + +/** + * struct drm_i915_gem_mmap_offset - Retrieve an offset so we can mmap this buffer object. + * + * This struct is passed as argument to the `DRM_IOCTL_I915_GEM_MMAP_OFFSET` ioctl, + * and is used to retrieve the fake offset to mmap an object specified by &handle. + * + * The legacy way of using `DRM_IOCTL_I915_GEM_MMAP` is removed on gen12+. + * `DRM_IOCTL_I915_GEM_MMAP_GTT` is an older supported alias to this struct, but will behave + * as setting the &extensions to 0, and &flags to `I915_MMAP_OFFSET_GTT`. + */ +struct drm_i915_gem_mmap_offset { + /** @handle: Handle for the object being mapped. */ + __u32 handle; + /** @pad: Must be zero */ + __u32 pad; + /** + * @offset: The fake offset to use for subsequent mmap call + * + * This is a fixed-size type for 32/64 compatibility. + */ + __u64 offset; + + /** + * @flags: Flags for extended behaviour. + * + * It is mandatory that one of the `MMAP_OFFSET` types + * should be included: + * + * - `I915_MMAP_OFFSET_GTT`: Use mmap with the object bound to GTT. (Write-Combined) + * - `I915_MMAP_OFFSET_WC`: Use Write-Combined caching. + * - `I915_MMAP_OFFSET_WB`: Use Write-Back caching. + * - `I915_MMAP_OFFSET_FIXED`: Use object placement to determine caching. + * + * On devices with local memory `I915_MMAP_OFFSET_FIXED` is the only valid + * type. On devices without local memory, this caching mode is invalid. + * + * As caching mode when specifying `I915_MMAP_OFFSET_FIXED`, WC or WB will + * be used, depending on the object placement on creation. WB will be used + * when the object can only exist in system memory, WC otherwise. + */ + __u64 flags; + +#define I915_MMAP_OFFSET_GTT 0 +#define I915_MMAP_OFFSET_WC 1 +#define I915_MMAP_OFFSET_WB 2 +#define I915_MMAP_OFFSET_UC 3 +#define I915_MMAP_OFFSET_FIXED 4 + + /** + * @extensions: Zero-terminated chain of extensions. + * + * No current extensions defined; mbz. + */ + __u64 extensions; +}; + +/** + * struct drm_i915_gem_set_domain - Adjust the objects write or read domain, in + * preparation for accessing the pages via some CPU domain. + * + * Specifying a new write or read domain will flush the object out of the + * previous domain(if required), before then updating the objects domain + * tracking with the new domain. + * + * Note this might involve waiting for the object first if it is still active on + * the GPU. + * + * Supported values for @read_domains and @write_domain: + * + * - I915_GEM_DOMAIN_WC: Uncached write-combined domain + * - I915_GEM_DOMAIN_CPU: CPU cache domain + * - I915_GEM_DOMAIN_GTT: Mappable aperture domain + * + * All other domains are rejected. + * + * Note that for discrete, starting from DG1, this is no longer supported, and + * is instead rejected. On such platforms the CPU domain is effectively static, + * where we also only support a single &drm_i915_gem_mmap_offset cache mode, + * which can't be set explicitly and instead depends on the object placements, + * as per the below. + * + * Implicit caching rules, starting from DG1: + * + * - If any of the object placements (see &drm_i915_gem_create_ext_memory_regions) + * contain I915_MEMORY_CLASS_DEVICE then the object will be allocated and + * mapped as write-combined only. + * + * - Everything else is always allocated and mapped as write-back, with the + * guarantee that everything is also coherent with the GPU. + * + * Note that this is likely to change in the future again, where we might need + * more flexibility on future devices, so making this all explicit as part of a + * new &drm_i915_gem_create_ext extension is probable. + */ +struct drm_i915_gem_set_domain { + /** @handle: Handle for the object. */ + __u32 handle; + + /** @read_domains: New read domains. */ + __u32 read_domains; + + /** + * @write_domain: New write domain. + * + * Note that having something in the write domain implies it's in the + * read domain, and only that read domain. + */ + __u32 write_domain; +}; + +struct drm_i915_gem_sw_finish { + /** Handle for the object */ + __u32 handle; +}; + +struct drm_i915_gem_relocation_entry { + /** + * Handle of the buffer being pointed to by this relocation entry. + * + * It's appealing to make this be an index into the mm_validate_entry + * list to refer to the buffer, but this allows the driver to create + * a relocation list for state buffers and not re-write it per + * exec using the buffer. + */ + __u32 target_handle; + + /** + * Value to be added to the offset of the target buffer to make up + * the relocation entry. + */ + __u32 delta; + + /** Offset in the buffer the relocation entry will be written into */ + __u64 offset; + + /** + * Offset value of the target buffer that the relocation entry was last + * written as. + * + * If the buffer has the same offset as last time, we can skip syncing + * and writing the relocation. This value is written back out by + * the execbuffer ioctl when the relocation is written. + */ + __u64 presumed_offset; + + /** + * Target memory domains read by this operation. + */ + __u32 read_domains; + + /** + * Target memory domains written by this operation. + * + * Note that only one domain may be written by the whole + * execbuffer operation, so that where there are conflicts, + * the application will get -EINVAL back. + */ + __u32 write_domain; +}; + +/** @{ + * Intel memory domains + * + * Most of these just align with the various caches in + * the system and are used to flush and invalidate as + * objects end up cached in different domains. + */ +/** CPU cache */ +#define I915_GEM_DOMAIN_CPU 0x00000001 +/** Render cache, used by 2D and 3D drawing */ +#define I915_GEM_DOMAIN_RENDER 0x00000002 +/** Sampler cache, used by texture engine */ +#define I915_GEM_DOMAIN_SAMPLER 0x00000004 +/** Command queue, used to load batch buffers */ +#define I915_GEM_DOMAIN_COMMAND 0x00000008 +/** Instruction cache, used by shader programs */ +#define I915_GEM_DOMAIN_INSTRUCTION 0x00000010 +/** Vertex address cache */ +#define I915_GEM_DOMAIN_VERTEX 0x00000020 +/** GTT domain - aperture and scanout */ +#define I915_GEM_DOMAIN_GTT 0x00000040 +/** WC domain - uncached access */ +#define I915_GEM_DOMAIN_WC 0x00000080 +/** @} */ + +struct drm_i915_gem_exec_object { + /** + * User's handle for a buffer to be bound into the GTT for this + * operation. + */ + __u32 handle; + + /** Number of relocations to be performed on this buffer */ + __u32 relocation_count; + /** + * Pointer to array of struct drm_i915_gem_relocation_entry containing + * the relocations to be performed in this buffer. + */ + __u64 relocs_ptr; + + /** Required alignment in graphics aperture */ + __u64 alignment; + + /** + * Returned value of the updated offset of the object, for future + * presumed_offset writes. + */ + __u64 offset; +}; + +/* DRM_IOCTL_I915_GEM_EXECBUFFER was removed in Linux 5.13 */ +struct drm_i915_gem_execbuffer { + /** + * List of buffers to be validated with their relocations to be + * performend on them. + * + * This is a pointer to an array of struct drm_i915_gem_validate_entry. + * + * These buffers must be listed in an order such that all relocations + * a buffer is performing refer to buffers that have already appeared + * in the validate list. + */ + __u64 buffers_ptr; + __u32 buffer_count; + + /** Offset in the batchbuffer to start execution from. */ + __u32 batch_start_offset; + /** Bytes used in batchbuffer from batch_start_offset */ + __u32 batch_len; + __u32 DR1; + __u32 DR4; + __u32 num_cliprects; + /** This is a struct drm_clip_rect *cliprects */ + __u64 cliprects_ptr; +}; + +struct drm_i915_gem_exec_object2 { + /** + * User's handle for a buffer to be bound into the GTT for this + * operation. + */ + __u32 handle; + + /** Number of relocations to be performed on this buffer */ + __u32 relocation_count; + /** + * Pointer to array of struct drm_i915_gem_relocation_entry containing + * the relocations to be performed in this buffer. + */ + __u64 relocs_ptr; + + /** Required alignment in graphics aperture */ + __u64 alignment; + + /** + * When the EXEC_OBJECT_PINNED flag is specified this is populated by + * the user with the GTT offset at which this object will be pinned. + * + * When the I915_EXEC_NO_RELOC flag is specified this must contain the + * presumed_offset of the object. + * + * During execbuffer2 the kernel populates it with the value of the + * current GTT offset of the object, for future presumed_offset writes. + * + * See struct drm_i915_gem_create_ext for the rules when dealing with + * alignment restrictions with I915_MEMORY_CLASS_DEVICE, on devices with + * minimum page sizes, like DG2. + */ + __u64 offset; + +#define EXEC_OBJECT_NEEDS_FENCE (1<<0) +#define EXEC_OBJECT_NEEDS_GTT (1<<1) +#define EXEC_OBJECT_WRITE (1<<2) +#define EXEC_OBJECT_SUPPORTS_48B_ADDRESS (1<<3) +#define EXEC_OBJECT_PINNED (1<<4) +#define EXEC_OBJECT_PAD_TO_SIZE (1<<5) +/* The kernel implicitly tracks GPU activity on all GEM objects, and + * synchronises operations with outstanding rendering. This includes + * rendering on other devices if exported via dma-buf. However, sometimes + * this tracking is too coarse and the user knows better. For example, + * if the object is split into non-overlapping ranges shared between different + * clients or engines (i.e. suballocating objects), the implicit tracking + * by kernel assumes that each operation affects the whole object rather + * than an individual range, causing needless synchronisation between clients. + * The kernel will also forgo any CPU cache flushes prior to rendering from + * the object as the client is expected to be also handling such domain + * tracking. + * + * The kernel maintains the implicit tracking in order to manage resources + * used by the GPU - this flag only disables the synchronisation prior to + * rendering with this object in this execbuf. + * + * Opting out of implicit synhronisation requires the user to do its own + * explicit tracking to avoid rendering corruption. See, for example, + * I915_PARAM_HAS_EXEC_FENCE to order execbufs and execute them asynchronously. + */ +#define EXEC_OBJECT_ASYNC (1<<6) +/* Request that the contents of this execobject be copied into the error + * state upon a GPU hang involving this batch for post-mortem debugging. + * These buffers are recorded in no particular order as "user" in + * /sys/class/drm/cardN/error. Query I915_PARAM_HAS_EXEC_CAPTURE to see + * if the kernel supports this flag. + */ +#define EXEC_OBJECT_CAPTURE (1<<7) +/* All remaining bits are MBZ and RESERVED FOR FUTURE USE */ +#define __EXEC_OBJECT_UNKNOWN_FLAGS -(EXEC_OBJECT_CAPTURE<<1) + __u64 flags; + + union { + __u64 rsvd1; + __u64 pad_to_size; + }; + __u64 rsvd2; +}; + +/** + * struct drm_i915_gem_exec_fence - An input or output fence for the execbuf + * ioctl. + * + * The request will wait for input fence to signal before submission. + * + * The returned output fence will be signaled after the completion of the + * request. + */ +struct drm_i915_gem_exec_fence { + /** @handle: User's handle for a drm_syncobj to wait on or signal. */ + __u32 handle; + + /** + * @flags: Supported flags are: + * + * I915_EXEC_FENCE_WAIT: + * Wait for the input fence before request submission. + * + * I915_EXEC_FENCE_SIGNAL: + * Return request completion fence as output + */ + __u32 flags; +#define I915_EXEC_FENCE_WAIT (1<<0) +#define I915_EXEC_FENCE_SIGNAL (1<<1) +#define __I915_EXEC_FENCE_UNKNOWN_FLAGS (-(I915_EXEC_FENCE_SIGNAL << 1)) +}; + +/** + * struct drm_i915_gem_execbuffer_ext_timeline_fences - Timeline fences + * for execbuf ioctl. + * + * This structure describes an array of drm_syncobj and associated points for + * timeline variants of drm_syncobj. It is invalid to append this structure to + * the execbuf if I915_EXEC_FENCE_ARRAY is set. + */ +struct drm_i915_gem_execbuffer_ext_timeline_fences { +#define DRM_I915_GEM_EXECBUFFER_EXT_TIMELINE_FENCES 0 + /** @base: Extension link. See struct i915_user_extension. */ + struct i915_user_extension base; + + /** + * @fence_count: Number of elements in the @handles_ptr & @value_ptr + * arrays. + */ + __u64 fence_count; + + /** + * @handles_ptr: Pointer to an array of struct drm_i915_gem_exec_fence + * of length @fence_count. + */ + __u64 handles_ptr; + + /** + * @values_ptr: Pointer to an array of u64 values of length + * @fence_count. + * Values must be 0 for a binary drm_syncobj. A Value of 0 for a + * timeline drm_syncobj is invalid as it turns a drm_syncobj into a + * binary one. + */ + __u64 values_ptr; +}; + +/** + * struct drm_i915_gem_execbuffer2 - Structure for DRM_I915_GEM_EXECBUFFER2 + * ioctl. + */ +struct drm_i915_gem_execbuffer2 { + /** @buffers_ptr: Pointer to a list of gem_exec_object2 structs */ + __u64 buffers_ptr; + + /** @buffer_count: Number of elements in @buffers_ptr array */ + __u32 buffer_count; + + /** + * @batch_start_offset: Offset in the batchbuffer to start execution + * from. + */ + __u32 batch_start_offset; + + /** + * @batch_len: Length in bytes of the batch buffer, starting from the + * @batch_start_offset. If 0, length is assumed to be the batch buffer + * object size. + */ + __u32 batch_len; + + /** @DR1: deprecated */ + __u32 DR1; + + /** @DR4: deprecated */ + __u32 DR4; + + /** @num_cliprects: See @cliprects_ptr */ + __u32 num_cliprects; + + /** + * @cliprects_ptr: Kernel clipping was a DRI1 misfeature. + * + * It is invalid to use this field if I915_EXEC_FENCE_ARRAY or + * I915_EXEC_USE_EXTENSIONS flags are not set. + * + * If I915_EXEC_FENCE_ARRAY is set, then this is a pointer to an array + * of &drm_i915_gem_exec_fence and @num_cliprects is the length of the + * array. + * + * If I915_EXEC_USE_EXTENSIONS is set, then this is a pointer to a + * single &i915_user_extension and num_cliprects is 0. + */ + __u64 cliprects_ptr; + + /** @flags: Execbuf flags */ + __u64 flags; +#define I915_EXEC_RING_MASK (0x3f) +#define I915_EXEC_DEFAULT (0<<0) +#define I915_EXEC_RENDER (1<<0) +#define I915_EXEC_BSD (2<<0) +#define I915_EXEC_BLT (3<<0) +#define I915_EXEC_VEBOX (4<<0) + +/* Used for switching the constants addressing mode on gen4+ RENDER ring. + * Gen6+ only supports relative addressing to dynamic state (default) and + * absolute addressing. + * + * These flags are ignored for the BSD and BLT rings. + */ +#define I915_EXEC_CONSTANTS_MASK (3<<6) +#define I915_EXEC_CONSTANTS_REL_GENERAL (0<<6) /* default */ +#define I915_EXEC_CONSTANTS_ABSOLUTE (1<<6) +#define I915_EXEC_CONSTANTS_REL_SURFACE (2<<6) /* gen4/5 only */ + +/** Resets the SO write offset registers for transform feedback on gen7. */ +#define I915_EXEC_GEN7_SOL_RESET (1<<8) + +/** Request a privileged ("secure") batch buffer. Note only available for + * DRM_ROOT_ONLY | DRM_MASTER processes. + */ +#define I915_EXEC_SECURE (1<<9) + +/** Inform the kernel that the batch is and will always be pinned. This + * negates the requirement for a workaround to be performed to avoid + * an incoherent CS (such as can be found on 830/845). If this flag is + * not passed, the kernel will endeavour to make sure the batch is + * coherent with the CS before execution. If this flag is passed, + * userspace assumes the responsibility for ensuring the same. + */ +#define I915_EXEC_IS_PINNED (1<<10) + +/** Provide a hint to the kernel that the command stream and auxiliary + * state buffers already holds the correct presumed addresses and so the + * relocation process may be skipped if no buffers need to be moved in + * preparation for the execbuffer. + */ +#define I915_EXEC_NO_RELOC (1<<11) + +/** Use the reloc.handle as an index into the exec object array rather + * than as the per-file handle. + */ +#define I915_EXEC_HANDLE_LUT (1<<12) + +/** Used for switching BSD rings on the platforms with two BSD rings */ +#define I915_EXEC_BSD_SHIFT (13) +#define I915_EXEC_BSD_MASK (3 << I915_EXEC_BSD_SHIFT) +/* default ping-pong mode */ +#define I915_EXEC_BSD_DEFAULT (0 << I915_EXEC_BSD_SHIFT) +#define I915_EXEC_BSD_RING1 (1 << I915_EXEC_BSD_SHIFT) +#define I915_EXEC_BSD_RING2 (2 << I915_EXEC_BSD_SHIFT) + +/** Tell the kernel that the batchbuffer is processed by + * the resource streamer. + */ +#define I915_EXEC_RESOURCE_STREAMER (1<<15) + +/* Setting I915_EXEC_FENCE_IN implies that lower_32_bits(rsvd2) represent + * a sync_file fd to wait upon (in a nonblocking manner) prior to executing + * the batch. + * + * Returns -EINVAL if the sync_file fd cannot be found. + */ +#define I915_EXEC_FENCE_IN (1<<16) + +/* Setting I915_EXEC_FENCE_OUT causes the ioctl to return a sync_file fd + * in the upper_32_bits(rsvd2) upon success. Ownership of the fd is given + * to the caller, and it should be close() after use. (The fd is a regular + * file descriptor and will be cleaned up on process termination. It holds + * a reference to the request, but nothing else.) + * + * The sync_file fd can be combined with other sync_file and passed either + * to execbuf using I915_EXEC_FENCE_IN, to atomic KMS ioctls (so that a flip + * will only occur after this request completes), or to other devices. + * + * Using I915_EXEC_FENCE_OUT requires use of + * DRM_IOCTL_I915_GEM_EXECBUFFER2_WR ioctl so that the result is written + * back to userspace. Failure to do so will cause the out-fence to always + * be reported as zero, and the real fence fd to be leaked. + */ +#define I915_EXEC_FENCE_OUT (1<<17) + +/* + * Traditionally the execbuf ioctl has only considered the final element in + * the execobject[] to be the executable batch. Often though, the client + * will known the batch object prior to construction and being able to place + * it into the execobject[] array first can simplify the relocation tracking. + * Setting I915_EXEC_BATCH_FIRST tells execbuf to use element 0 of the + * execobject[] as the * batch instead (the default is to use the last + * element). + */ +#define I915_EXEC_BATCH_FIRST (1<<18) + +/* Setting I915_FENCE_ARRAY implies that num_cliprects and cliprects_ptr + * define an array of i915_gem_exec_fence structures which specify a set of + * dma fences to wait upon or signal. + */ +#define I915_EXEC_FENCE_ARRAY (1<<19) + +/* + * Setting I915_EXEC_FENCE_SUBMIT implies that lower_32_bits(rsvd2) represent + * a sync_file fd to wait upon (in a nonblocking manner) prior to executing + * the batch. + * + * Returns -EINVAL if the sync_file fd cannot be found. + */ +#define I915_EXEC_FENCE_SUBMIT (1 << 20) + +/* + * Setting I915_EXEC_USE_EXTENSIONS implies that + * drm_i915_gem_execbuffer2.cliprects_ptr is treated as a pointer to an linked + * list of i915_user_extension. Each i915_user_extension node is the base of a + * larger structure. The list of supported structures are listed in the + * drm_i915_gem_execbuffer_ext enum. + */ +#define I915_EXEC_USE_EXTENSIONS (1 << 21) +#define __I915_EXEC_UNKNOWN_FLAGS (-(I915_EXEC_USE_EXTENSIONS << 1)) + + /** @rsvd1: Context id */ + __u64 rsvd1; + + /** + * @rsvd2: in and out sync_file file descriptors. + * + * When I915_EXEC_FENCE_IN or I915_EXEC_FENCE_SUBMIT flag is set, the + * lower 32 bits of this field will have the in sync_file fd (input). + * + * When I915_EXEC_FENCE_OUT flag is set, the upper 32 bits of this + * field will have the out sync_file fd (output). + */ + __u64 rsvd2; +}; + +#define I915_EXEC_CONTEXT_ID_MASK (0xffffffff) +#define i915_execbuffer2_set_context_id(eb2, context) \ + (eb2).rsvd1 = context & I915_EXEC_CONTEXT_ID_MASK +#define i915_execbuffer2_get_context_id(eb2) \ + ((eb2).rsvd1 & I915_EXEC_CONTEXT_ID_MASK) + +struct drm_i915_gem_pin { + /** Handle of the buffer to be pinned. */ + __u32 handle; + __u32 pad; + + /** alignment required within the aperture */ + __u64 alignment; + + /** Returned GTT offset of the buffer. */ + __u64 offset; +}; + +struct drm_i915_gem_unpin { + /** Handle of the buffer to be unpinned. */ + __u32 handle; + __u32 pad; +}; + +struct drm_i915_gem_busy { + /** Handle of the buffer to check for busy */ + __u32 handle; + + /** Return busy status + * + * A return of 0 implies that the object is idle (after + * having flushed any pending activity), and a non-zero return that + * the object is still in-flight on the GPU. (The GPU has not yet + * signaled completion for all pending requests that reference the + * object.) An object is guaranteed to become idle eventually (so + * long as no new GPU commands are executed upon it). Due to the + * asynchronous nature of the hardware, an object reported + * as busy may become idle before the ioctl is completed. + * + * Furthermore, if the object is busy, which engine is busy is only + * provided as a guide and only indirectly by reporting its class + * (there may be more than one engine in each class). There are race + * conditions which prevent the report of which engines are busy from + * being always accurate. However, the converse is not true. If the + * object is idle, the result of the ioctl, that all engines are idle, + * is accurate. + * + * The returned dword is split into two fields to indicate both + * the engine classess on which the object is being read, and the + * engine class on which it is currently being written (if any). + * + * The low word (bits 0:15) indicate if the object is being written + * to by any engine (there can only be one, as the GEM implicit + * synchronisation rules force writes to be serialised). Only the + * engine class (offset by 1, I915_ENGINE_CLASS_RENDER is reported as + * 1 not 0 etc) for the last write is reported. + * + * The high word (bits 16:31) are a bitmask of which engines classes + * are currently reading from the object. Multiple engines may be + * reading from the object simultaneously. + * + * The value of each engine class is the same as specified in the + * I915_CONTEXT_PARAM_ENGINES context parameter and via perf, i.e. + * I915_ENGINE_CLASS_RENDER, I915_ENGINE_CLASS_COPY, etc. + * Some hardware may have parallel execution engines, e.g. multiple + * media engines, which are mapped to the same class identifier and so + * are not separately reported for busyness. + * + * Caveat emptor: + * Only the boolean result of this query is reliable; that is whether + * the object is idle or busy. The report of which engines are busy + * should be only used as a heuristic. + */ + __u32 busy; +}; + +/** + * struct drm_i915_gem_caching - Set or get the caching for given object + * handle. + * + * Allow userspace to control the GTT caching bits for a given object when the + * object is later mapped through the ppGTT(or GGTT on older platforms lacking + * ppGTT support, or if the object is used for scanout). Note that this might + * require unbinding the object from the GTT first, if its current caching value + * doesn't match. + * + * Note that this all changes on discrete platforms, starting from DG1, the + * set/get caching is no longer supported, and is now rejected. Instead the CPU + * caching attributes(WB vs WC) will become an immutable creation time property + * for the object, along with the GTT caching level. For now we don't expose any + * new uAPI for this, instead on DG1 this is all implicit, although this largely + * shouldn't matter since DG1 is coherent by default(without any way of + * controlling it). + * + * Implicit caching rules, starting from DG1: + * + * - If any of the object placements (see &drm_i915_gem_create_ext_memory_regions) + * contain I915_MEMORY_CLASS_DEVICE then the object will be allocated and + * mapped as write-combined only. + * + * - Everything else is always allocated and mapped as write-back, with the + * guarantee that everything is also coherent with the GPU. + * + * Note that this is likely to change in the future again, where we might need + * more flexibility on future devices, so making this all explicit as part of a + * new &drm_i915_gem_create_ext extension is probable. + * + * Side note: Part of the reason for this is that changing the at-allocation-time CPU + * caching attributes for the pages might be required(and is expensive) if we + * need to then CPU map the pages later with different caching attributes. This + * inconsistent caching behaviour, while supported on x86, is not universally + * supported on other architectures. So for simplicity we opt for setting + * everything at creation time, whilst also making it immutable, on discrete + * platforms. + */ +struct drm_i915_gem_caching { + /** + * @handle: Handle of the buffer to set/get the caching level. + */ + __u32 handle; + + /** + * @caching: The GTT caching level to apply or possible return value. + * + * The supported @caching values: + * + * I915_CACHING_NONE: + * + * GPU access is not coherent with CPU caches. Default for machines + * without an LLC. This means manual flushing might be needed, if we + * want GPU access to be coherent. + * + * I915_CACHING_CACHED: + * + * GPU access is coherent with CPU caches and furthermore the data is + * cached in last-level caches shared between CPU cores and the GPU GT. + * + * I915_CACHING_DISPLAY: + * + * Special GPU caching mode which is coherent with the scanout engines. + * Transparently falls back to I915_CACHING_NONE on platforms where no + * special cache mode (like write-through or gfdt flushing) is + * available. The kernel automatically sets this mode when using a + * buffer as a scanout target. Userspace can manually set this mode to + * avoid a costly stall and clflush in the hotpath of drawing the first + * frame. + */ +#define I915_CACHING_NONE 0 +#define I915_CACHING_CACHED 1 +#define I915_CACHING_DISPLAY 2 + __u32 caching; +}; + +#define I915_TILING_NONE 0 +#define I915_TILING_X 1 +#define I915_TILING_Y 2 +/* + * Do not add new tiling types here. The I915_TILING_* values are for + * de-tiling fence registers that no longer exist on modern platforms. Although + * the hardware may support new types of tiling in general (e.g., Tile4), we + * do not need to add them to the uapi that is specific to now-defunct ioctls. + */ +#define I915_TILING_LAST I915_TILING_Y + +#define I915_BIT_6_SWIZZLE_NONE 0 +#define I915_BIT_6_SWIZZLE_9 1 +#define I915_BIT_6_SWIZZLE_9_10 2 +#define I915_BIT_6_SWIZZLE_9_11 3 +#define I915_BIT_6_SWIZZLE_9_10_11 4 +/* Not seen by userland */ +#define I915_BIT_6_SWIZZLE_UNKNOWN 5 +/* Seen by userland. */ +#define I915_BIT_6_SWIZZLE_9_17 6 +#define I915_BIT_6_SWIZZLE_9_10_17 7 + +struct drm_i915_gem_set_tiling { + /** Handle of the buffer to have its tiling state updated */ + __u32 handle; + + /** + * Tiling mode for the object (I915_TILING_NONE, I915_TILING_X, + * I915_TILING_Y). + * + * This value is to be set on request, and will be updated by the + * kernel on successful return with the actual chosen tiling layout. + * + * The tiling mode may be demoted to I915_TILING_NONE when the system + * has bit 6 swizzling that can't be managed correctly by GEM. + * + * Buffer contents become undefined when changing tiling_mode. + */ + __u32 tiling_mode; + + /** + * Stride in bytes for the object when in I915_TILING_X or + * I915_TILING_Y. + */ + __u32 stride; + + /** + * Returned address bit 6 swizzling required for CPU access through + * mmap mapping. + */ + __u32 swizzle_mode; +}; + +struct drm_i915_gem_get_tiling { + /** Handle of the buffer to get tiling state for. */ + __u32 handle; + + /** + * Current tiling mode for the object (I915_TILING_NONE, I915_TILING_X, + * I915_TILING_Y). + */ + __u32 tiling_mode; + + /** + * Returned address bit 6 swizzling required for CPU access through + * mmap mapping. + */ + __u32 swizzle_mode; + + /** + * Returned address bit 6 swizzling required for CPU access through + * mmap mapping whilst bound. + */ + __u32 phys_swizzle_mode; +}; + +struct drm_i915_gem_get_aperture { + /** Total size of the aperture used by i915_gem_execbuffer, in bytes */ + __u64 aper_size; + + /** + * Available space in the aperture used by i915_gem_execbuffer, in + * bytes + */ + __u64 aper_available_size; +}; + +struct drm_i915_get_pipe_from_crtc_id { + /** ID of CRTC being requested **/ + __u32 crtc_id; + + /** pipe of requested CRTC **/ + __u32 pipe; +}; + +#define I915_MADV_WILLNEED 0 +#define I915_MADV_DONTNEED 1 +#define __I915_MADV_PURGED 2 /* internal state */ + +struct drm_i915_gem_madvise { + /** Handle of the buffer to change the backing store advice */ + __u32 handle; + + /* Advice: either the buffer will be needed again in the near future, + * or wont be and could be discarded under memory pressure. + */ + __u32 madv; + + /** Whether the backing store still exists. */ + __u32 retained; +}; + +/* flags */ +#define I915_OVERLAY_TYPE_MASK 0xff +#define I915_OVERLAY_YUV_PLANAR 0x01 +#define I915_OVERLAY_YUV_PACKED 0x02 +#define I915_OVERLAY_RGB 0x03 + +#define I915_OVERLAY_DEPTH_MASK 0xff00 +#define I915_OVERLAY_RGB24 0x1000 +#define I915_OVERLAY_RGB16 0x2000 +#define I915_OVERLAY_RGB15 0x3000 +#define I915_OVERLAY_YUV422 0x0100 +#define I915_OVERLAY_YUV411 0x0200 +#define I915_OVERLAY_YUV420 0x0300 +#define I915_OVERLAY_YUV410 0x0400 + +#define I915_OVERLAY_SWAP_MASK 0xff0000 +#define I915_OVERLAY_NO_SWAP 0x000000 +#define I915_OVERLAY_UV_SWAP 0x010000 +#define I915_OVERLAY_Y_SWAP 0x020000 +#define I915_OVERLAY_Y_AND_UV_SWAP 0x030000 + +#define I915_OVERLAY_FLAGS_MASK 0xff000000 +#define I915_OVERLAY_ENABLE 0x01000000 + +struct drm_intel_overlay_put_image { + /* various flags and src format description */ + __u32 flags; + /* source picture description */ + __u32 bo_handle; + /* stride values and offsets are in bytes, buffer relative */ + __u16 stride_Y; /* stride for packed formats */ + __u16 stride_UV; + __u32 offset_Y; /* offset for packet formats */ + __u32 offset_U; + __u32 offset_V; + /* in pixels */ + __u16 src_width; + __u16 src_height; + /* to compensate the scaling factors for partially covered surfaces */ + __u16 src_scan_width; + __u16 src_scan_height; + /* output crtc description */ + __u32 crtc_id; + __u16 dst_x; + __u16 dst_y; + __u16 dst_width; + __u16 dst_height; +}; + +/* flags */ +#define I915_OVERLAY_UPDATE_ATTRS (1<<0) +#define I915_OVERLAY_UPDATE_GAMMA (1<<1) +#define I915_OVERLAY_DISABLE_DEST_COLORKEY (1<<2) +struct drm_intel_overlay_attrs { + __u32 flags; + __u32 color_key; + __s32 brightness; + __u32 contrast; + __u32 saturation; + __u32 gamma0; + __u32 gamma1; + __u32 gamma2; + __u32 gamma3; + __u32 gamma4; + __u32 gamma5; +}; + +/* + * Intel sprite handling + * + * Color keying works with a min/mask/max tuple. Both source and destination + * color keying is allowed. + * + * Source keying: + * Sprite pixels within the min & max values, masked against the color channels + * specified in the mask field, will be transparent. All other pixels will + * be displayed on top of the primary plane. For RGB surfaces, only the min + * and mask fields will be used; ranged compares are not allowed. + * + * Destination keying: + * Primary plane pixels that match the min value, masked against the color + * channels specified in the mask field, will be replaced by corresponding + * pixels from the sprite plane. + * + * Note that source & destination keying are exclusive; only one can be + * active on a given plane. + */ + +#define I915_SET_COLORKEY_NONE (1<<0) /* Deprecated. Instead set + * flags==0 to disable colorkeying. + */ +#define I915_SET_COLORKEY_DESTINATION (1<<1) +#define I915_SET_COLORKEY_SOURCE (1<<2) +struct drm_intel_sprite_colorkey { + __u32 plane_id; + __u32 min_value; + __u32 channel_mask; + __u32 max_value; + __u32 flags; +}; + +struct drm_i915_gem_wait { + /** Handle of BO we shall wait on */ + __u32 bo_handle; + __u32 flags; + /** Number of nanoseconds to wait, Returns time remaining. */ + __s64 timeout_ns; +}; + +struct drm_i915_gem_context_create { + __u32 ctx_id; /* output: id of new context*/ + __u32 pad; +}; + +/** + * struct drm_i915_gem_context_create_ext - Structure for creating contexts. + */ +struct drm_i915_gem_context_create_ext { + /** @ctx_id: Id of the created context (output) */ + __u32 ctx_id; + + /** + * @flags: Supported flags are: + * + * I915_CONTEXT_CREATE_FLAGS_USE_EXTENSIONS: + * + * Extensions may be appended to this structure and driver must check + * for those. See @extensions. + * + * I915_CONTEXT_CREATE_FLAGS_SINGLE_TIMELINE + * + * Created context will have single timeline. + */ + __u32 flags; +#define I915_CONTEXT_CREATE_FLAGS_USE_EXTENSIONS (1u << 0) +#define I915_CONTEXT_CREATE_FLAGS_SINGLE_TIMELINE (1u << 1) +#define I915_CONTEXT_CREATE_FLAGS_UNKNOWN \ + (-(I915_CONTEXT_CREATE_FLAGS_SINGLE_TIMELINE << 1)) + + /** + * @extensions: Zero-terminated chain of extensions. + * + * I915_CONTEXT_CREATE_EXT_SETPARAM: + * Context parameter to set or query during context creation. + * See struct drm_i915_gem_context_create_ext_setparam. + * + * I915_CONTEXT_CREATE_EXT_CLONE: + * This extension has been removed. On the off chance someone somewhere + * has attempted to use it, never re-use this extension number. + */ + __u64 extensions; +#define I915_CONTEXT_CREATE_EXT_SETPARAM 0 +#define I915_CONTEXT_CREATE_EXT_CLONE 1 +}; + +/** + * struct drm_i915_gem_context_param - Context parameter to set or query. + */ +struct drm_i915_gem_context_param { + /** @ctx_id: Context id */ + __u32 ctx_id; + + /** @size: Size of the parameter @value */ + __u32 size; + + /** @param: Parameter to set or query */ + __u64 param; +#define I915_CONTEXT_PARAM_BAN_PERIOD 0x1 +/* I915_CONTEXT_PARAM_NO_ZEROMAP has been removed. On the off chance + * someone somewhere has attempted to use it, never re-use this context + * param number. + */ +#define I915_CONTEXT_PARAM_NO_ZEROMAP 0x2 +#define I915_CONTEXT_PARAM_GTT_SIZE 0x3 +#define I915_CONTEXT_PARAM_NO_ERROR_CAPTURE 0x4 +#define I915_CONTEXT_PARAM_BANNABLE 0x5 +#define I915_CONTEXT_PARAM_PRIORITY 0x6 +#define I915_CONTEXT_MAX_USER_PRIORITY 1023 /* inclusive */ +#define I915_CONTEXT_DEFAULT_PRIORITY 0 +#define I915_CONTEXT_MIN_USER_PRIORITY -1023 /* inclusive */ + /* + * When using the following param, value should be a pointer to + * drm_i915_gem_context_param_sseu. + */ +#define I915_CONTEXT_PARAM_SSEU 0x7 + +/* + * Not all clients may want to attempt automatic recover of a context after + * a hang (for example, some clients may only submit very small incremental + * batches relying on known logical state of previous batches which will never + * recover correctly and each attempt will hang), and so would prefer that + * the context is forever banned instead. + * + * If set to false (0), after a reset, subsequent (and in flight) rendering + * from this context is discarded, and the client will need to create a new + * context to use instead. + * + * If set to true (1), the kernel will automatically attempt to recover the + * context by skipping the hanging batch and executing the next batch starting + * from the default context state (discarding the incomplete logical context + * state lost due to the reset). + * + * On creation, all new contexts are marked as recoverable. + */ +#define I915_CONTEXT_PARAM_RECOVERABLE 0x8 + + /* + * The id of the associated virtual memory address space (ppGTT) of + * this context. Can be retrieved and passed to another context + * (on the same fd) for both to use the same ppGTT and so share + * address layouts, and avoid reloading the page tables on context + * switches between themselves. + * + * See DRM_I915_GEM_VM_CREATE and DRM_I915_GEM_VM_DESTROY. + */ +#define I915_CONTEXT_PARAM_VM 0x9 + +/* + * I915_CONTEXT_PARAM_ENGINES: + * + * Bind this context to operate on this subset of available engines. Henceforth, + * the I915_EXEC_RING selector for DRM_IOCTL_I915_GEM_EXECBUFFER2 operates as + * an index into this array of engines; I915_EXEC_DEFAULT selecting engine[0] + * and upwards. Slots 0...N are filled in using the specified (class, instance). + * Use + * engine_class: I915_ENGINE_CLASS_INVALID, + * engine_instance: I915_ENGINE_CLASS_INVALID_NONE + * to specify a gap in the array that can be filled in later, e.g. by a + * virtual engine used for load balancing. + * + * Setting the number of engines bound to the context to 0, by passing a zero + * sized argument, will revert back to default settings. + * + * See struct i915_context_param_engines. + * + * Extensions: + * i915_context_engines_load_balance (I915_CONTEXT_ENGINES_EXT_LOAD_BALANCE) + * i915_context_engines_bond (I915_CONTEXT_ENGINES_EXT_BOND) + * i915_context_engines_parallel_submit (I915_CONTEXT_ENGINES_EXT_PARALLEL_SUBMIT) + */ +#define I915_CONTEXT_PARAM_ENGINES 0xa + +/* + * I915_CONTEXT_PARAM_PERSISTENCE: + * + * Allow the context and active rendering to survive the process until + * completion. Persistence allows fire-and-forget clients to queue up a + * bunch of work, hand the output over to a display server and then quit. + * If the context is marked as not persistent, upon closing (either via + * an explicit DRM_I915_GEM_CONTEXT_DESTROY or implicitly from file closure + * or process termination), the context and any outstanding requests will be + * cancelled (and exported fences for cancelled requests marked as -EIO). + * + * By default, new contexts allow persistence. + */ +#define I915_CONTEXT_PARAM_PERSISTENCE 0xb + +/* This API has been removed. On the off chance someone somewhere has + * attempted to use it, never re-use this context param number. + */ +#define I915_CONTEXT_PARAM_RINGSIZE 0xc + +/* + * I915_CONTEXT_PARAM_PROTECTED_CONTENT: + * + * Mark that the context makes use of protected content, which will result + * in the context being invalidated when the protected content session is. + * Given that the protected content session is killed on suspend, the device + * is kept awake for the lifetime of a protected context, so the user should + * make sure to dispose of them once done. + * This flag can only be set at context creation time and, when set to true, + * must be preceded by an explicit setting of I915_CONTEXT_PARAM_RECOVERABLE + * to false. This flag can't be set to true in conjunction with setting the + * I915_CONTEXT_PARAM_BANNABLE flag to false. Creation example: + * + * .. code-block:: C + * + * struct drm_i915_gem_context_create_ext_setparam p_protected = { + * .base = { + * .name = I915_CONTEXT_CREATE_EXT_SETPARAM, + * }, + * .param = { + * .param = I915_CONTEXT_PARAM_PROTECTED_CONTENT, + * .value = 1, + * } + * }; + * struct drm_i915_gem_context_create_ext_setparam p_norecover = { + * .base = { + * .name = I915_CONTEXT_CREATE_EXT_SETPARAM, + * .next_extension = to_user_pointer(&p_protected), + * }, + * .param = { + * .param = I915_CONTEXT_PARAM_RECOVERABLE, + * .value = 0, + * } + * }; + * struct drm_i915_gem_context_create_ext create = { + * .flags = I915_CONTEXT_CREATE_FLAGS_USE_EXTENSIONS, + * .extensions = to_user_pointer(&p_norecover); + * }; + * + * ctx_id = gem_context_create_ext(drm_fd, &create); + * + * In addition to the normal failure cases, setting this flag during context + * creation can result in the following errors: + * + * -ENODEV: feature not available + * -EPERM: trying to mark a recoverable or not bannable context as protected + * -ENXIO: A dependency such as a component driver or firmware is not yet + * loaded so user space may need to attempt again. Depending on the + * device, this error may be reported if protected context creation is + * attempted very early after kernel start because the internal timeout + * waiting for such dependencies is not guaranteed to be larger than + * required (numbers differ depending on system and kernel config): + * - ADL/RPL: dependencies may take up to 3 seconds from kernel start + * while context creation internal timeout is 250 milisecs + * - MTL: dependencies may take up to 8 seconds from kernel start + * while context creation internal timeout is 250 milisecs + * NOTE: such dependencies happen once, so a subsequent call to create a + * protected context after a prior successful call will not experience + * such timeouts and will not return -ENXIO (unless the driver is reloaded, + * or, depending on the device, resumes from a suspended state). + * -EIO: The firmware did not succeed in creating the protected context. + */ +#define I915_CONTEXT_PARAM_PROTECTED_CONTENT 0xd +/* Must be kept compact -- no holes and well documented */ + + /** @value: Context parameter value to be set or queried */ + __u64 value; +}; + +/* + * Context SSEU programming + * + * It may be necessary for either functional or performance reason to configure + * a context to run with a reduced number of SSEU (where SSEU stands for Slice/ + * Sub-slice/EU). + * + * This is done by configuring SSEU configuration using the below + * @struct drm_i915_gem_context_param_sseu for every supported engine which + * userspace intends to use. + * + * Not all GPUs or engines support this functionality in which case an error + * code -ENODEV will be returned. + * + * Also, flexibility of possible SSEU configuration permutations varies between + * GPU generations and software imposed limitations. Requesting such a + * combination will return an error code of -EINVAL. + * + * NOTE: When perf/OA is active the context's SSEU configuration is ignored in + * favour of a single global setting. + */ +struct drm_i915_gem_context_param_sseu { + /* + * Engine class & instance to be configured or queried. + */ + struct i915_engine_class_instance engine; + + /* + * Unknown flags must be cleared to zero. + */ + __u32 flags; +#define I915_CONTEXT_SSEU_FLAG_ENGINE_INDEX (1u << 0) + + /* + * Mask of slices to enable for the context. Valid values are a subset + * of the bitmask value returned for I915_PARAM_SLICE_MASK. + */ + __u64 slice_mask; + + /* + * Mask of subslices to enable for the context. Valid values are a + * subset of the bitmask value return by I915_PARAM_SUBSLICE_MASK. + */ + __u64 subslice_mask; + + /* + * Minimum/Maximum number of EUs to enable per subslice for the + * context. min_eus_per_subslice must be inferior or equal to + * max_eus_per_subslice. + */ + __u16 min_eus_per_subslice; + __u16 max_eus_per_subslice; + + /* + * Unused for now. Must be cleared to zero. + */ + __u32 rsvd; +}; + +/** + * DOC: Virtual Engine uAPI + * + * Virtual engine is a concept where userspace is able to configure a set of + * physical engines, submit a batch buffer, and let the driver execute it on any + * engine from the set as it sees fit. + * + * This is primarily useful on parts which have multiple instances of a same + * class engine, like for example GT3+ Skylake parts with their two VCS engines. + * + * For instance userspace can enumerate all engines of a certain class using the + * previously described `Engine Discovery uAPI`_. After that userspace can + * create a GEM context with a placeholder slot for the virtual engine (using + * `I915_ENGINE_CLASS_INVALID` and `I915_ENGINE_CLASS_INVALID_NONE` for class + * and instance respectively) and finally using the + * `I915_CONTEXT_ENGINES_EXT_LOAD_BALANCE` extension place a virtual engine in + * the same reserved slot. + * + * Example of creating a virtual engine and submitting a batch buffer to it: + * + * .. code-block:: C + * + * I915_DEFINE_CONTEXT_ENGINES_LOAD_BALANCE(virtual, 2) = { + * .base.name = I915_CONTEXT_ENGINES_EXT_LOAD_BALANCE, + * .engine_index = 0, // Place this virtual engine into engine map slot 0 + * .num_siblings = 2, + * .engines = { { I915_ENGINE_CLASS_VIDEO, 0 }, + * { I915_ENGINE_CLASS_VIDEO, 1 }, }, + * }; + * I915_DEFINE_CONTEXT_PARAM_ENGINES(engines, 1) = { + * .engines = { { I915_ENGINE_CLASS_INVALID, + * I915_ENGINE_CLASS_INVALID_NONE } }, + * .extensions = to_user_pointer(&virtual), // Chains after load_balance extension + * }; + * struct drm_i915_gem_context_create_ext_setparam p_engines = { + * .base = { + * .name = I915_CONTEXT_CREATE_EXT_SETPARAM, + * }, + * .param = { + * .param = I915_CONTEXT_PARAM_ENGINES, + * .value = to_user_pointer(&engines), + * .size = sizeof(engines), + * }, + * }; + * struct drm_i915_gem_context_create_ext create = { + * .flags = I915_CONTEXT_CREATE_FLAGS_USE_EXTENSIONS, + * .extensions = to_user_pointer(&p_engines); + * }; + * + * ctx_id = gem_context_create_ext(drm_fd, &create); + * + * // Now we have created a GEM context with its engine map containing a + * // single virtual engine. Submissions to this slot can go either to + * // vcs0 or vcs1, depending on the load balancing algorithm used inside + * // the driver. The load balancing is dynamic from one batch buffer to + * // another and transparent to userspace. + * + * ... + * execbuf.rsvd1 = ctx_id; + * execbuf.flags = 0; // Submits to index 0 which is the virtual engine + * gem_execbuf(drm_fd, &execbuf); + */ + +/* + * i915_context_engines_load_balance: + * + * Enable load balancing across this set of engines. + * + * Into the I915_EXEC_DEFAULT slot [0], a virtual engine is created that when + * used will proxy the execbuffer request onto one of the set of engines + * in such a way as to distribute the load evenly across the set. + * + * The set of engines must be compatible (e.g. the same HW class) as they + * will share the same logical GPU context and ring. + * + * To intermix rendering with the virtual engine and direct rendering onto + * the backing engines (bypassing the load balancing proxy), the context must + * be defined to use a single timeline for all engines. + */ +struct i915_context_engines_load_balance { + struct i915_user_extension base; + + __u16 engine_index; + __u16 num_siblings; + __u32 flags; /* all undefined flags must be zero */ + + __u64 mbz64; /* reserved for future use; must be zero */ + + struct i915_engine_class_instance engines[]; +} __attribute__((packed)); + +#define I915_DEFINE_CONTEXT_ENGINES_LOAD_BALANCE(name__, N__) struct { \ + struct i915_user_extension base; \ + __u16 engine_index; \ + __u16 num_siblings; \ + __u32 flags; \ + __u64 mbz64; \ + struct i915_engine_class_instance engines[N__]; \ +} __attribute__((packed)) name__ + +/* + * i915_context_engines_bond: + * + * Constructed bonded pairs for execution within a virtual engine. + * + * All engines are equal, but some are more equal than others. Given + * the distribution of resources in the HW, it may be preferable to run + * a request on a given subset of engines in parallel to a request on a + * specific engine. We enable this selection of engines within a virtual + * engine by specifying bonding pairs, for any given master engine we will + * only execute on one of the corresponding siblings within the virtual engine. + * + * To execute a request in parallel on the master engine and a sibling requires + * coordination with a I915_EXEC_FENCE_SUBMIT. + */ +struct i915_context_engines_bond { + struct i915_user_extension base; + + struct i915_engine_class_instance master; + + __u16 virtual_index; /* index of virtual engine in ctx->engines[] */ + __u16 num_bonds; + + __u64 flags; /* all undefined flags must be zero */ + __u64 mbz64[4]; /* reserved for future use; must be zero */ + + struct i915_engine_class_instance engines[]; +} __attribute__((packed)); + +#define I915_DEFINE_CONTEXT_ENGINES_BOND(name__, N__) struct { \ + struct i915_user_extension base; \ + struct i915_engine_class_instance master; \ + __u16 virtual_index; \ + __u16 num_bonds; \ + __u64 flags; \ + __u64 mbz64[4]; \ + struct i915_engine_class_instance engines[N__]; \ +} __attribute__((packed)) name__ + +/** + * struct i915_context_engines_parallel_submit - Configure engine for + * parallel submission. + * + * Setup a slot in the context engine map to allow multiple BBs to be submitted + * in a single execbuf IOCTL. Those BBs will then be scheduled to run on the GPU + * in parallel. Multiple hardware contexts are created internally in the i915 to + * run these BBs. Once a slot is configured for N BBs only N BBs can be + * submitted in each execbuf IOCTL and this is implicit behavior e.g. The user + * doesn't tell the execbuf IOCTL there are N BBs, the execbuf IOCTL knows how + * many BBs there are based on the slot's configuration. The N BBs are the last + * N buffer objects or first N if I915_EXEC_BATCH_FIRST is set. + * + * The default placement behavior is to create implicit bonds between each + * context if each context maps to more than 1 physical engine (e.g. context is + * a virtual engine). Also we only allow contexts of same engine class and these + * contexts must be in logically contiguous order. Examples of the placement + * behavior are described below. Lastly, the default is to not allow BBs to be + * preempted mid-batch. Rather insert coordinated preemption points on all + * hardware contexts between each set of BBs. Flags could be added in the future + * to change both of these default behaviors. + * + * Returns -EINVAL if hardware context placement configuration is invalid or if + * the placement configuration isn't supported on the platform / submission + * interface. + * Returns -ENODEV if extension isn't supported on the platform / submission + * interface. + * + * .. code-block:: none + * + * Examples syntax: + * CS[X] = generic engine of same class, logical instance X + * INVALID = I915_ENGINE_CLASS_INVALID, I915_ENGINE_CLASS_INVALID_NONE + * + * Example 1 pseudo code: + * set_engines(INVALID) + * set_parallel(engine_index=0, width=2, num_siblings=1, + * engines=CS[0],CS[1]) + * + * Results in the following valid placement: + * CS[0], CS[1] + * + * Example 2 pseudo code: + * set_engines(INVALID) + * set_parallel(engine_index=0, width=2, num_siblings=2, + * engines=CS[0],CS[2],CS[1],CS[3]) + * + * Results in the following valid placements: + * CS[0], CS[1] + * CS[2], CS[3] + * + * This can be thought of as two virtual engines, each containing two + * engines thereby making a 2D array. However, there are bonds tying the + * entries together and placing restrictions on how they can be scheduled. + * Specifically, the scheduler can choose only vertical columns from the 2D + * array. That is, CS[0] is bonded to CS[1] and CS[2] to CS[3]. So if the + * scheduler wants to submit to CS[0], it must also choose CS[1] and vice + * versa. Same for CS[2] requires also using CS[3]. + * VE[0] = CS[0], CS[2] + * VE[1] = CS[1], CS[3] + * + * Example 3 pseudo code: + * set_engines(INVALID) + * set_parallel(engine_index=0, width=2, num_siblings=2, + * engines=CS[0],CS[1],CS[1],CS[3]) + * + * Results in the following valid and invalid placements: + * CS[0], CS[1] + * CS[1], CS[3] - Not logically contiguous, return -EINVAL + */ +struct i915_context_engines_parallel_submit { + /** + * @base: base user extension. + */ + struct i915_user_extension base; + + /** + * @engine_index: slot for parallel engine + */ + __u16 engine_index; + + /** + * @width: number of contexts per parallel engine or in other words the + * number of batches in each submission + */ + __u16 width; + + /** + * @num_siblings: number of siblings per context or in other words the + * number of possible placements for each submission + */ + __u16 num_siblings; + + /** + * @mbz16: reserved for future use; must be zero + */ + __u16 mbz16; + + /** + * @flags: all undefined flags must be zero, currently not defined flags + */ + __u64 flags; + + /** + * @mbz64: reserved for future use; must be zero + */ + __u64 mbz64[3]; + + /** + * @engines: 2-d array of engine instances to configure parallel engine + * + * length = width (i) * num_siblings (j) + * index = j + i * num_siblings + */ + struct i915_engine_class_instance engines[]; + +} __packed; + +#define I915_DEFINE_CONTEXT_ENGINES_PARALLEL_SUBMIT(name__, N__) struct { \ + struct i915_user_extension base; \ + __u16 engine_index; \ + __u16 width; \ + __u16 num_siblings; \ + __u16 mbz16; \ + __u64 flags; \ + __u64 mbz64[3]; \ + struct i915_engine_class_instance engines[N__]; \ +} __attribute__((packed)) name__ + +/** + * DOC: Context Engine Map uAPI + * + * Context engine map is a new way of addressing engines when submitting batch- + * buffers, replacing the existing way of using identifiers like `I915_EXEC_BLT` + * inside the flags field of `struct drm_i915_gem_execbuffer2`. + * + * To use it created GEM contexts need to be configured with a list of engines + * the user is intending to submit to. This is accomplished using the + * `I915_CONTEXT_PARAM_ENGINES` parameter and `struct + * i915_context_param_engines`. + * + * For such contexts the `I915_EXEC_RING_MASK` field becomes an index into the + * configured map. + * + * Example of creating such context and submitting against it: + * + * .. code-block:: C + * + * I915_DEFINE_CONTEXT_PARAM_ENGINES(engines, 2) = { + * .engines = { { I915_ENGINE_CLASS_RENDER, 0 }, + * { I915_ENGINE_CLASS_COPY, 0 } } + * }; + * struct drm_i915_gem_context_create_ext_setparam p_engines = { + * .base = { + * .name = I915_CONTEXT_CREATE_EXT_SETPARAM, + * }, + * .param = { + * .param = I915_CONTEXT_PARAM_ENGINES, + * .value = to_user_pointer(&engines), + * .size = sizeof(engines), + * }, + * }; + * struct drm_i915_gem_context_create_ext create = { + * .flags = I915_CONTEXT_CREATE_FLAGS_USE_EXTENSIONS, + * .extensions = to_user_pointer(&p_engines); + * }; + * + * ctx_id = gem_context_create_ext(drm_fd, &create); + * + * // We have now created a GEM context with two engines in the map: + * // Index 0 points to rcs0 while index 1 points to bcs0. Other engines + * // will not be accessible from this context. + * + * ... + * execbuf.rsvd1 = ctx_id; + * execbuf.flags = 0; // Submits to index 0, which is rcs0 for this context + * gem_execbuf(drm_fd, &execbuf); + * + * ... + * execbuf.rsvd1 = ctx_id; + * execbuf.flags = 1; // Submits to index 0, which is bcs0 for this context + * gem_execbuf(drm_fd, &execbuf); + */ + +struct i915_context_param_engines { + __u64 extensions; /* linked chain of extension blocks, 0 terminates */ +#define I915_CONTEXT_ENGINES_EXT_LOAD_BALANCE 0 /* see i915_context_engines_load_balance */ +#define I915_CONTEXT_ENGINES_EXT_BOND 1 /* see i915_context_engines_bond */ +#define I915_CONTEXT_ENGINES_EXT_PARALLEL_SUBMIT 2 /* see i915_context_engines_parallel_submit */ + struct i915_engine_class_instance engines[]; +} __attribute__((packed)); + +#define I915_DEFINE_CONTEXT_PARAM_ENGINES(name__, N__) struct { \ + __u64 extensions; \ + struct i915_engine_class_instance engines[N__]; \ +} __attribute__((packed)) name__ + +/** + * struct drm_i915_gem_context_create_ext_setparam - Context parameter + * to set or query during context creation. + */ +struct drm_i915_gem_context_create_ext_setparam { + /** @base: Extension link. See struct i915_user_extension. */ + struct i915_user_extension base; + + /** + * @param: Context parameter to set or query. + * See struct drm_i915_gem_context_param. + */ + struct drm_i915_gem_context_param param; +}; + +struct drm_i915_gem_context_destroy { + __u32 ctx_id; + __u32 pad; +}; + +/** + * struct drm_i915_gem_vm_control - Structure to create or destroy VM. + * + * DRM_I915_GEM_VM_CREATE - + * + * Create a new virtual memory address space (ppGTT) for use within a context + * on the same file. Extensions can be provided to configure exactly how the + * address space is setup upon creation. + * + * The id of new VM (bound to the fd) for use with I915_CONTEXT_PARAM_VM is + * returned in the outparam @id. + * + * An extension chain maybe provided, starting with @extensions, and terminated + * by the @next_extension being 0. Currently, no extensions are defined. + * + * DRM_I915_GEM_VM_DESTROY - + * + * Destroys a previously created VM id, specified in @vm_id. + * + * No extensions or flags are allowed currently, and so must be zero. + */ +struct drm_i915_gem_vm_control { + /** @extensions: Zero-terminated chain of extensions. */ + __u64 extensions; + + /** @flags: reserved for future usage, currently MBZ */ + __u32 flags; + + /** @vm_id: Id of the VM created or to be destroyed */ + __u32 vm_id; +}; + +struct drm_i915_reg_read { + /* + * Register offset. + * For 64bit wide registers where the upper 32bits don't immediately + * follow the lower 32bits, the offset of the lower 32bits must + * be specified + */ + __u64 offset; +#define I915_REG_READ_8B_WA (1ul << 0) + + __u64 val; /* Return value */ +}; + +/* Known registers: + * + * Render engine timestamp - 0x2358 + 64bit - gen7+ + * - Note this register returns an invalid value if using the default + * single instruction 8byte read, in order to workaround that pass + * flag I915_REG_READ_8B_WA in offset field. + * + */ + +struct drm_i915_reset_stats { + __u32 ctx_id; + __u32 flags; + + /* All resets since boot/module reload, for all contexts */ + __u32 reset_count; + + /* Number of batches lost when active in GPU, for this context */ + __u32 batch_active; + + /* Number of batches lost pending for execution, for this context */ + __u32 batch_pending; + + __u32 pad; +}; + +/** + * struct drm_i915_gem_userptr - Create GEM object from user allocated memory. + * + * Userptr objects have several restrictions on what ioctls can be used with the + * object handle. + */ +struct drm_i915_gem_userptr { + /** + * @user_ptr: The pointer to the allocated memory. + * + * Needs to be aligned to PAGE_SIZE. + */ + __u64 user_ptr; + + /** + * @user_size: + * + * The size in bytes for the allocated memory. This will also become the + * object size. + * + * Needs to be aligned to PAGE_SIZE, and should be at least PAGE_SIZE, + * or larger. + */ + __u64 user_size; + + /** + * @flags: + * + * Supported flags: + * + * I915_USERPTR_READ_ONLY: + * + * Mark the object as readonly, this also means GPU access can only be + * readonly. This is only supported on HW which supports readonly access + * through the GTT. If the HW can't support readonly access, an error is + * returned. + * + * I915_USERPTR_PROBE: + * + * Probe the provided @user_ptr range and validate that the @user_ptr is + * indeed pointing to normal memory and that the range is also valid. + * For example if some garbage address is given to the kernel, then this + * should complain. + * + * Returns -EFAULT if the probe failed. + * + * Note that this doesn't populate the backing pages, and also doesn't + * guarantee that the object will remain valid when the object is + * eventually used. + * + * The kernel supports this feature if I915_PARAM_HAS_USERPTR_PROBE + * returns a non-zero value. + * + * I915_USERPTR_UNSYNCHRONIZED: + * + * NOT USED. Setting this flag will result in an error. + */ + __u32 flags; +#define I915_USERPTR_READ_ONLY 0x1 +#define I915_USERPTR_PROBE 0x2 +#define I915_USERPTR_UNSYNCHRONIZED 0x80000000 + /** + * @handle: Returned handle for the object. + * + * Object handles are nonzero. + */ + __u32 handle; +}; + +enum drm_i915_oa_format { + I915_OA_FORMAT_A13 = 1, /* HSW only */ + I915_OA_FORMAT_A29, /* HSW only */ + I915_OA_FORMAT_A13_B8_C8, /* HSW only */ + I915_OA_FORMAT_B4_C8, /* HSW only */ + I915_OA_FORMAT_A45_B8_C8, /* HSW only */ + I915_OA_FORMAT_B4_C8_A16, /* HSW only */ + I915_OA_FORMAT_C4_B8, /* HSW+ */ + + /* Gen8+ */ + I915_OA_FORMAT_A12, + I915_OA_FORMAT_A12_B8_C8, + I915_OA_FORMAT_A32u40_A4u32_B8_C8, + + /* DG2 */ + I915_OAR_FORMAT_A32u40_A4u32_B8_C8, + I915_OA_FORMAT_A24u40_A14u32_B8_C8, + + /* MTL OAM */ + I915_OAM_FORMAT_MPEC8u64_B8_C8, + I915_OAM_FORMAT_MPEC8u32_B8_C8, + + I915_OA_FORMAT_MAX /* non-ABI */ +}; + +enum drm_i915_perf_property_id { + /** + * Open the stream for a specific context handle (as used with + * execbuffer2). A stream opened for a specific context this way + * won't typically require root privileges. + * + * This property is available in perf revision 1. + */ + DRM_I915_PERF_PROP_CTX_HANDLE = 1, + + /** + * A value of 1 requests the inclusion of raw OA unit reports as + * part of stream samples. + * + * This property is available in perf revision 1. + */ + DRM_I915_PERF_PROP_SAMPLE_OA, + + /** + * The value specifies which set of OA unit metrics should be + * configured, defining the contents of any OA unit reports. + * + * This property is available in perf revision 1. + */ + DRM_I915_PERF_PROP_OA_METRICS_SET, + + /** + * The value specifies the size and layout of OA unit reports. + * + * This property is available in perf revision 1. + */ + DRM_I915_PERF_PROP_OA_FORMAT, + + /** + * Specifying this property implicitly requests periodic OA unit + * sampling and (at least on Haswell) the sampling frequency is derived + * from this exponent as follows: + * + * 80ns * 2^(period_exponent + 1) + * + * This property is available in perf revision 1. + */ + DRM_I915_PERF_PROP_OA_EXPONENT, + + /** + * Specifying this property is only valid when specify a context to + * filter with DRM_I915_PERF_PROP_CTX_HANDLE. Specifying this property + * will hold preemption of the particular context we want to gather + * performance data about. The execbuf2 submissions must include a + * drm_i915_gem_execbuffer_ext_perf parameter for this to apply. + * + * This property is available in perf revision 3. + */ + DRM_I915_PERF_PROP_HOLD_PREEMPTION, + + /** + * Specifying this pins all contexts to the specified SSEU power + * configuration for the duration of the recording. + * + * This parameter's value is a pointer to a struct + * drm_i915_gem_context_param_sseu. + * + * This property is available in perf revision 4. + */ + DRM_I915_PERF_PROP_GLOBAL_SSEU, + + /** + * This optional parameter specifies the timer interval in nanoseconds + * at which the i915 driver will check the OA buffer for available data. + * Minimum allowed value is 100 microseconds. A default value is used by + * the driver if this parameter is not specified. Note that larger timer + * values will reduce cpu consumption during OA perf captures. However, + * excessively large values would potentially result in OA buffer + * overwrites as captures reach end of the OA buffer. + * + * This property is available in perf revision 5. + */ + DRM_I915_PERF_PROP_POLL_OA_PERIOD, + + /** + * Multiple engines may be mapped to the same OA unit. The OA unit is + * identified by class:instance of any engine mapped to it. + * + * This parameter specifies the engine class and must be passed along + * with DRM_I915_PERF_PROP_OA_ENGINE_INSTANCE. + * + * This property is available in perf revision 6. + */ + DRM_I915_PERF_PROP_OA_ENGINE_CLASS, + + /** + * This parameter specifies the engine instance and must be passed along + * with DRM_I915_PERF_PROP_OA_ENGINE_CLASS. + * + * This property is available in perf revision 6. + */ + DRM_I915_PERF_PROP_OA_ENGINE_INSTANCE, + + DRM_I915_PERF_PROP_MAX /* non-ABI */ +}; + +struct drm_i915_perf_open_param { + __u32 flags; +#define I915_PERF_FLAG_FD_CLOEXEC (1<<0) +#define I915_PERF_FLAG_FD_NONBLOCK (1<<1) +#define I915_PERF_FLAG_DISABLED (1<<2) + + /** The number of u64 (id, value) pairs */ + __u32 num_properties; + + /** + * Pointer to array of u64 (id, value) pairs configuring the stream + * to open. + */ + __u64 properties_ptr; +}; + +/* + * Enable data capture for a stream that was either opened in a disabled state + * via I915_PERF_FLAG_DISABLED or was later disabled via + * I915_PERF_IOCTL_DISABLE. + * + * It is intended to be cheaper to disable and enable a stream than it may be + * to close and re-open a stream with the same configuration. + * + * It's undefined whether any pending data for the stream will be lost. + * + * This ioctl is available in perf revision 1. + */ +#define I915_PERF_IOCTL_ENABLE _IO('i', 0x0) + +/* + * Disable data capture for a stream. + * + * It is an error to try and read a stream that is disabled. + * + * This ioctl is available in perf revision 1. + */ +#define I915_PERF_IOCTL_DISABLE _IO('i', 0x1) + +/* + * Change metrics_set captured by a stream. + * + * If the stream is bound to a specific context, the configuration change + * will performed inline with that context such that it takes effect before + * the next execbuf submission. + * + * Returns the previously bound metrics set id, or a negative error code. + * + * This ioctl is available in perf revision 2. + */ +#define I915_PERF_IOCTL_CONFIG _IO('i', 0x2) + +/* + * Common to all i915 perf records + */ +struct drm_i915_perf_record_header { + __u32 type; + __u16 pad; + __u16 size; +}; + +enum drm_i915_perf_record_type { + + /** + * Samples are the work horse record type whose contents are extensible + * and defined when opening an i915 perf stream based on the given + * properties. + * + * Boolean properties following the naming convention + * DRM_I915_PERF_SAMPLE_xyz_PROP request the inclusion of 'xyz' data in + * every sample. + * + * The order of these sample properties given by userspace has no + * affect on the ordering of data within a sample. The order is + * documented here. + * + * struct { + * struct drm_i915_perf_record_header header; + * + * { u32 oa_report[]; } && DRM_I915_PERF_PROP_SAMPLE_OA + * }; + */ + DRM_I915_PERF_RECORD_SAMPLE = 1, + + /* + * Indicates that one or more OA reports were not written by the + * hardware. This can happen for example if an MI_REPORT_PERF_COUNT + * command collides with periodic sampling - which would be more likely + * at higher sampling frequencies. + */ + DRM_I915_PERF_RECORD_OA_REPORT_LOST = 2, + + /** + * An error occurred that resulted in all pending OA reports being lost. + */ + DRM_I915_PERF_RECORD_OA_BUFFER_LOST = 3, + + DRM_I915_PERF_RECORD_MAX /* non-ABI */ +}; + +/** + * struct drm_i915_perf_oa_config + * + * Structure to upload perf dynamic configuration into the kernel. + */ +struct drm_i915_perf_oa_config { + /** + * @uuid: + * + * String formatted like "%\08x-%\04x-%\04x-%\04x-%\012x" + */ + char uuid[36]; + + /** + * @n_mux_regs: + * + * Number of mux regs in &mux_regs_ptr. + */ + __u32 n_mux_regs; + + /** + * @n_boolean_regs: + * + * Number of boolean regs in &boolean_regs_ptr. + */ + __u32 n_boolean_regs; + + /** + * @n_flex_regs: + * + * Number of flex regs in &flex_regs_ptr. + */ + __u32 n_flex_regs; + + /** + * @mux_regs_ptr: + * + * Pointer to tuples of u32 values (register address, value) for mux + * registers. Expected length of buffer is (2 * sizeof(u32) * + * &n_mux_regs). + */ + __u64 mux_regs_ptr; + + /** + * @boolean_regs_ptr: + * + * Pointer to tuples of u32 values (register address, value) for mux + * registers. Expected length of buffer is (2 * sizeof(u32) * + * &n_boolean_regs). + */ + __u64 boolean_regs_ptr; + + /** + * @flex_regs_ptr: + * + * Pointer to tuples of u32 values (register address, value) for mux + * registers. Expected length of buffer is (2 * sizeof(u32) * + * &n_flex_regs). + */ + __u64 flex_regs_ptr; +}; + +/** + * struct drm_i915_query_item - An individual query for the kernel to process. + * + * The behaviour is determined by the @query_id. Note that exactly what + * @data_ptr is also depends on the specific @query_id. + */ +struct drm_i915_query_item { + /** + * @query_id: + * + * The id for this query. Currently accepted query IDs are: + * - %DRM_I915_QUERY_TOPOLOGY_INFO (see struct drm_i915_query_topology_info) + * - %DRM_I915_QUERY_ENGINE_INFO (see struct drm_i915_engine_info) + * - %DRM_I915_QUERY_PERF_CONFIG (see struct drm_i915_query_perf_config) + * - %DRM_I915_QUERY_MEMORY_REGIONS (see struct drm_i915_query_memory_regions) + * - %DRM_I915_QUERY_HWCONFIG_BLOB (see `GuC HWCONFIG blob uAPI`) + * - %DRM_I915_QUERY_GEOMETRY_SUBSLICES (see struct drm_i915_query_topology_info) + */ + __u64 query_id; +#define DRM_I915_QUERY_TOPOLOGY_INFO 1 +#define DRM_I915_QUERY_ENGINE_INFO 2 +#define DRM_I915_QUERY_PERF_CONFIG 3 +#define DRM_I915_QUERY_MEMORY_REGIONS 4 +#define DRM_I915_QUERY_HWCONFIG_BLOB 5 +#define DRM_I915_QUERY_GEOMETRY_SUBSLICES 6 +/* Must be kept compact -- no holes and well documented */ + + /** + * @length: + * + * When set to zero by userspace, this is filled with the size of the + * data to be written at the @data_ptr pointer. The kernel sets this + * value to a negative value to signal an error on a particular query + * item. + */ + __s32 length; + + /** + * @flags: + * + * When &query_id == %DRM_I915_QUERY_TOPOLOGY_INFO, must be 0. + * + * When &query_id == %DRM_I915_QUERY_PERF_CONFIG, must be one of the + * following: + * + * - %DRM_I915_QUERY_PERF_CONFIG_LIST + * - %DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_UUID + * - %DRM_I915_QUERY_PERF_CONFIG_FOR_UUID + * + * When &query_id == %DRM_I915_QUERY_GEOMETRY_SUBSLICES must contain + * a struct i915_engine_class_instance that references a render engine. + */ + __u32 flags; +#define DRM_I915_QUERY_PERF_CONFIG_LIST 1 +#define DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_UUID 2 +#define DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_ID 3 + + /** + * @data_ptr: + * + * Data will be written at the location pointed by @data_ptr when the + * value of @length matches the length of the data to be written by the + * kernel. + */ + __u64 data_ptr; +}; + +/** + * struct drm_i915_query - Supply an array of struct drm_i915_query_item for the + * kernel to fill out. + * + * Note that this is generally a two step process for each struct + * drm_i915_query_item in the array: + * + * 1. Call the DRM_IOCTL_I915_QUERY, giving it our array of struct + * drm_i915_query_item, with &drm_i915_query_item.length set to zero. The + * kernel will then fill in the size, in bytes, which tells userspace how + * memory it needs to allocate for the blob(say for an array of properties). + * + * 2. Next we call DRM_IOCTL_I915_QUERY again, this time with the + * &drm_i915_query_item.data_ptr equal to our newly allocated blob. Note that + * the &drm_i915_query_item.length should still be the same as what the + * kernel previously set. At this point the kernel can fill in the blob. + * + * Note that for some query items it can make sense for userspace to just pass + * in a buffer/blob equal to or larger than the required size. In this case only + * a single ioctl call is needed. For some smaller query items this can work + * quite well. + * + */ +struct drm_i915_query { + /** @num_items: The number of elements in the @items_ptr array */ + __u32 num_items; + + /** + * @flags: Unused for now. Must be cleared to zero. + */ + __u32 flags; + + /** + * @items_ptr: + * + * Pointer to an array of struct drm_i915_query_item. The number of + * array elements is @num_items. + */ + __u64 items_ptr; +}; + +/** + * struct drm_i915_query_topology_info + * + * Describes slice/subslice/EU information queried by + * %DRM_I915_QUERY_TOPOLOGY_INFO + */ +struct drm_i915_query_topology_info { + /** + * @flags: + * + * Unused for now. Must be cleared to zero. + */ + __u16 flags; + + /** + * @max_slices: + * + * The number of bits used to express the slice mask. + */ + __u16 max_slices; + + /** + * @max_subslices: + * + * The number of bits used to express the subslice mask. + */ + __u16 max_subslices; + + /** + * @max_eus_per_subslice: + * + * The number of bits in the EU mask that correspond to a single + * subslice's EUs. + */ + __u16 max_eus_per_subslice; + + /** + * @subslice_offset: + * + * Offset in data[] at which the subslice masks are stored. + */ + __u16 subslice_offset; + + /** + * @subslice_stride: + * + * Stride at which each of the subslice masks for each slice are + * stored. + */ + __u16 subslice_stride; + + /** + * @eu_offset: + * + * Offset in data[] at which the EU masks are stored. + */ + __u16 eu_offset; + + /** + * @eu_stride: + * + * Stride at which each of the EU masks for each subslice are stored. + */ + __u16 eu_stride; + + /** + * @data: + * + * Contains 3 pieces of information : + * + * - The slice mask with one bit per slice telling whether a slice is + * available. The availability of slice X can be queried with the + * following formula : + * + * .. code:: c + * + * (data[X / 8] >> (X % 8)) & 1 + * + * Starting with Xe_HP platforms, Intel hardware no longer has + * traditional slices so i915 will always report a single slice + * (hardcoded slicemask = 0x1) which contains all of the platform's + * subslices. I.e., the mask here does not reflect any of the newer + * hardware concepts such as "gslices" or "cslices" since userspace + * is capable of inferring those from the subslice mask. + * + * - The subslice mask for each slice with one bit per subslice telling + * whether a subslice is available. Starting with Gen12 we use the + * term "subslice" to refer to what the hardware documentation + * describes as a "dual-subslices." The availability of subslice Y + * in slice X can be queried with the following formula : + * + * .. code:: c + * + * (data[subslice_offset + X * subslice_stride + Y / 8] >> (Y % 8)) & 1 + * + * - The EU mask for each subslice in each slice, with one bit per EU + * telling whether an EU is available. The availability of EU Z in + * subslice Y in slice X can be queried with the following formula : + * + * .. code:: c + * + * (data[eu_offset + + * (X * max_subslices + Y) * eu_stride + + * Z / 8 + * ] >> (Z % 8)) & 1 + */ + __u8 data[]; +}; + +/** + * DOC: Engine Discovery uAPI + * + * Engine discovery uAPI is a way of enumerating physical engines present in a + * GPU associated with an open i915 DRM file descriptor. This supersedes the old + * way of using `DRM_IOCTL_I915_GETPARAM` and engine identifiers like + * `I915_PARAM_HAS_BLT`. + * + * The need for this interface came starting with Icelake and newer GPUs, which + * started to establish a pattern of having multiple engines of a same class, + * where not all instances were always completely functionally equivalent. + * + * Entry point for this uapi is `DRM_IOCTL_I915_QUERY` with the + * `DRM_I915_QUERY_ENGINE_INFO` as the queried item id. + * + * Example for getting the list of engines: + * + * .. code-block:: C + * + * struct drm_i915_query_engine_info *info; + * struct drm_i915_query_item item = { + * .query_id = DRM_I915_QUERY_ENGINE_INFO; + * }; + * struct drm_i915_query query = { + * .num_items = 1, + * .items_ptr = (uintptr_t)&item, + * }; + * int err, i; + * + * // First query the size of the blob we need, this needs to be large + * // enough to hold our array of engines. The kernel will fill out the + * // item.length for us, which is the number of bytes we need. + * // + * // Alternatively a large buffer can be allocated straight away enabling + * // querying in one pass, in which case item.length should contain the + * // length of the provided buffer. + * err = ioctl(fd, DRM_IOCTL_I915_QUERY, &query); + * if (err) ... + * + * info = calloc(1, item.length); + * // Now that we allocated the required number of bytes, we call the ioctl + * // again, this time with the data_ptr pointing to our newly allocated + * // blob, which the kernel can then populate with info on all engines. + * item.data_ptr = (uintptr_t)&info, + * + * err = ioctl(fd, DRM_IOCTL_I915_QUERY, &query); + * if (err) ... + * + * // We can now access each engine in the array + * for (i = 0; i < info->num_engines; i++) { + * struct drm_i915_engine_info einfo = info->engines[i]; + * u16 class = einfo.engine.class; + * u16 instance = einfo.engine.instance; + * .... + * } + * + * free(info); + * + * Each of the enumerated engines, apart from being defined by its class and + * instance (see `struct i915_engine_class_instance`), also can have flags and + * capabilities defined as documented in i915_drm.h. + * + * For instance video engines which support HEVC encoding will have the + * `I915_VIDEO_CLASS_CAPABILITY_HEVC` capability bit set. + * + * Engine discovery only fully comes to its own when combined with the new way + * of addressing engines when submitting batch buffers using contexts with + * engine maps configured. + */ + +/** + * struct drm_i915_engine_info + * + * Describes one engine and it's capabilities as known to the driver. + */ +struct drm_i915_engine_info { + /** @engine: Engine class and instance. */ + struct i915_engine_class_instance engine; + + /** @rsvd0: Reserved field. */ + __u32 rsvd0; + + /** @flags: Engine flags. */ + __u64 flags; +#define I915_ENGINE_INFO_HAS_LOGICAL_INSTANCE (1 << 0) + + /** @capabilities: Capabilities of this engine. */ + __u64 capabilities; +#define I915_VIDEO_CLASS_CAPABILITY_HEVC (1 << 0) +#define I915_VIDEO_AND_ENHANCE_CLASS_CAPABILITY_SFC (1 << 1) + + /** @logical_instance: Logical instance of engine */ + __u16 logical_instance; + + /** @rsvd1: Reserved fields. */ + __u16 rsvd1[3]; + /** @rsvd2: Reserved fields. */ + __u64 rsvd2[3]; +}; + +/** + * struct drm_i915_query_engine_info + * + * Engine info query enumerates all engines known to the driver by filling in + * an array of struct drm_i915_engine_info structures. + */ +struct drm_i915_query_engine_info { + /** @num_engines: Number of struct drm_i915_engine_info structs following. */ + __u32 num_engines; + + /** @rsvd: MBZ */ + __u32 rsvd[3]; + + /** @engines: Marker for drm_i915_engine_info structures. */ + struct drm_i915_engine_info engines[]; +}; + +/** + * struct drm_i915_query_perf_config + * + * Data written by the kernel with query %DRM_I915_QUERY_PERF_CONFIG and + * %DRM_I915_QUERY_GEOMETRY_SUBSLICES. + */ +struct drm_i915_query_perf_config { + union { + /** + * @n_configs: + * + * When &drm_i915_query_item.flags == + * %DRM_I915_QUERY_PERF_CONFIG_LIST, i915 sets this fields to + * the number of configurations available. + */ + __u64 n_configs; + + /** + * @config: + * + * When &drm_i915_query_item.flags == + * %DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_ID, i915 will use the + * value in this field as configuration identifier to decide + * what data to write into config_ptr. + */ + __u64 config; + + /** + * @uuid: + * + * When &drm_i915_query_item.flags == + * %DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_UUID, i915 will use the + * value in this field as configuration identifier to decide + * what data to write into config_ptr. + * + * String formatted like "%08x-%04x-%04x-%04x-%012x" + */ + char uuid[36]; + }; + + /** + * @flags: + * + * Unused for now. Must be cleared to zero. + */ + __u32 flags; + + /** + * @data: + * + * When &drm_i915_query_item.flags == %DRM_I915_QUERY_PERF_CONFIG_LIST, + * i915 will write an array of __u64 of configuration identifiers. + * + * When &drm_i915_query_item.flags == %DRM_I915_QUERY_PERF_CONFIG_DATA, + * i915 will write a struct drm_i915_perf_oa_config. If the following + * fields of struct drm_i915_perf_oa_config are not set to 0, i915 will + * write into the associated pointers the values of submitted when the + * configuration was created : + * + * - &drm_i915_perf_oa_config.n_mux_regs + * - &drm_i915_perf_oa_config.n_boolean_regs + * - &drm_i915_perf_oa_config.n_flex_regs + */ + __u8 data[]; +}; + +/** + * enum drm_i915_gem_memory_class - Supported memory classes + */ +enum drm_i915_gem_memory_class { + /** @I915_MEMORY_CLASS_SYSTEM: System memory */ + I915_MEMORY_CLASS_SYSTEM = 0, + /** @I915_MEMORY_CLASS_DEVICE: Device local-memory */ + I915_MEMORY_CLASS_DEVICE, +}; + +/** + * struct drm_i915_gem_memory_class_instance - Identify particular memory region + */ +struct drm_i915_gem_memory_class_instance { + /** @memory_class: See enum drm_i915_gem_memory_class */ + __u16 memory_class; + + /** @memory_instance: Which instance */ + __u16 memory_instance; +}; + +/** + * struct drm_i915_memory_region_info - Describes one region as known to the + * driver. + * + * Note this is using both struct drm_i915_query_item and struct drm_i915_query. + * For this new query we are adding the new query id DRM_I915_QUERY_MEMORY_REGIONS + * at &drm_i915_query_item.query_id. + */ +struct drm_i915_memory_region_info { + /** @region: The class:instance pair encoding */ + struct drm_i915_gem_memory_class_instance region; + + /** @rsvd0: MBZ */ + __u32 rsvd0; + + /** + * @probed_size: Memory probed by the driver + * + * Note that it should not be possible to ever encounter a zero value + * here, also note that no current region type will ever return -1 here. + * Although for future region types, this might be a possibility. The + * same applies to the other size fields. + */ + __u64 probed_size; + + /** + * @unallocated_size: Estimate of memory remaining + * + * Requires CAP_PERFMON or CAP_SYS_ADMIN to get reliable accounting. + * Without this (or if this is an older kernel) the value here will + * always equal the @probed_size. Note this is only currently tracked + * for I915_MEMORY_CLASS_DEVICE regions (for other types the value here + * will always equal the @probed_size). + */ + __u64 unallocated_size; + + union { + /** @rsvd1: MBZ */ + __u64 rsvd1[8]; + struct { + /** + * @probed_cpu_visible_size: Memory probed by the driver + * that is CPU accessible. + * + * This will be always be <= @probed_size, and the + * remainder (if there is any) will not be CPU + * accessible. + * + * On systems without small BAR, the @probed_size will + * always equal the @probed_cpu_visible_size, since all + * of it will be CPU accessible. + * + * Note this is only tracked for + * I915_MEMORY_CLASS_DEVICE regions (for other types the + * value here will always equal the @probed_size). + * + * Note that if the value returned here is zero, then + * this must be an old kernel which lacks the relevant + * small-bar uAPI support (including + * I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS), but on + * such systems we should never actually end up with a + * small BAR configuration, assuming we are able to load + * the kernel module. Hence it should be safe to treat + * this the same as when @probed_cpu_visible_size == + * @probed_size. + */ + __u64 probed_cpu_visible_size; + + /** + * @unallocated_cpu_visible_size: Estimate of CPU + * visible memory remaining. + * + * Note this is only tracked for + * I915_MEMORY_CLASS_DEVICE regions (for other types the + * value here will always equal the + * @probed_cpu_visible_size). + * + * Requires CAP_PERFMON or CAP_SYS_ADMIN to get reliable + * accounting. Without this the value here will always + * equal the @probed_cpu_visible_size. Note this is only + * currently tracked for I915_MEMORY_CLASS_DEVICE + * regions (for other types the value here will also + * always equal the @probed_cpu_visible_size). + * + * If this is an older kernel the value here will be + * zero, see also @probed_cpu_visible_size. + */ + __u64 unallocated_cpu_visible_size; + }; + }; +}; + +/** + * struct drm_i915_query_memory_regions + * + * The region info query enumerates all regions known to the driver by filling + * in an array of struct drm_i915_memory_region_info structures. + * + * Example for getting the list of supported regions: + * + * .. code-block:: C + * + * struct drm_i915_query_memory_regions *info; + * struct drm_i915_query_item item = { + * .query_id = DRM_I915_QUERY_MEMORY_REGIONS; + * }; + * struct drm_i915_query query = { + * .num_items = 1, + * .items_ptr = (uintptr_t)&item, + * }; + * int err, i; + * + * // First query the size of the blob we need, this needs to be large + * // enough to hold our array of regions. The kernel will fill out the + * // item.length for us, which is the number of bytes we need. + * err = ioctl(fd, DRM_IOCTL_I915_QUERY, &query); + * if (err) ... + * + * info = calloc(1, item.length); + * // Now that we allocated the required number of bytes, we call the ioctl + * // again, this time with the data_ptr pointing to our newly allocated + * // blob, which the kernel can then populate with the all the region info. + * item.data_ptr = (uintptr_t)&info, + * + * err = ioctl(fd, DRM_IOCTL_I915_QUERY, &query); + * if (err) ... + * + * // We can now access each region in the array + * for (i = 0; i < info->num_regions; i++) { + * struct drm_i915_memory_region_info mr = info->regions[i]; + * u16 class = mr.region.class; + * u16 instance = mr.region.instance; + * + * .... + * } + * + * free(info); + */ +struct drm_i915_query_memory_regions { + /** @num_regions: Number of supported regions */ + __u32 num_regions; + + /** @rsvd: MBZ */ + __u32 rsvd[3]; + + /** @regions: Info about each supported region */ + struct drm_i915_memory_region_info regions[]; +}; + +/** + * DOC: GuC HWCONFIG blob uAPI + * + * The GuC produces a blob with information about the current device. + * i915 reads this blob from GuC and makes it available via this uAPI. + * + * The format and meaning of the blob content are documented in the + * Programmer's Reference Manual. + */ + +/** + * struct drm_i915_gem_create_ext - Existing gem_create behaviour, with added + * extension support using struct i915_user_extension. + * + * Note that new buffer flags should be added here, at least for the stuff that + * is immutable. Previously we would have two ioctls, one to create the object + * with gem_create, and another to apply various parameters, however this + * creates some ambiguity for the params which are considered immutable. Also in + * general we're phasing out the various SET/GET ioctls. + */ +struct drm_i915_gem_create_ext { + /** + * @size: Requested size for the object. + * + * The (page-aligned) allocated size for the object will be returned. + * + * On platforms like DG2/ATS the kernel will always use 64K or larger + * pages for I915_MEMORY_CLASS_DEVICE. The kernel also requires a + * minimum of 64K GTT alignment for such objects. + * + * NOTE: Previously the ABI here required a minimum GTT alignment of 2M + * on DG2/ATS, due to how the hardware implemented 64K GTT page support, + * where we had the following complications: + * + * 1) The entire PDE (which covers a 2MB virtual address range), must + * contain only 64K PTEs, i.e mixing 4K and 64K PTEs in the same + * PDE is forbidden by the hardware. + * + * 2) We still need to support 4K PTEs for I915_MEMORY_CLASS_SYSTEM + * objects. + * + * However on actual production HW this was completely changed to now + * allow setting a TLB hint at the PTE level (see PS64), which is a lot + * more flexible than the above. With this the 2M restriction was + * dropped where we now only require 64K. + */ + __u64 size; + + /** + * @handle: Returned handle for the object. + * + * Object handles are nonzero. + */ + __u32 handle; + + /** + * @flags: Optional flags. + * + * Supported values: + * + * I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS - Signal to the kernel that + * the object will need to be accessed via the CPU. + * + * Only valid when placing objects in I915_MEMORY_CLASS_DEVICE, and only + * strictly required on configurations where some subset of the device + * memory is directly visible/mappable through the CPU (which we also + * call small BAR), like on some DG2+ systems. Note that this is quite + * undesirable, but due to various factors like the client CPU, BIOS etc + * it's something we can expect to see in the wild. See + * &drm_i915_memory_region_info.probed_cpu_visible_size for how to + * determine if this system applies. + * + * Note that one of the placements MUST be I915_MEMORY_CLASS_SYSTEM, to + * ensure the kernel can always spill the allocation to system memory, + * if the object can't be allocated in the mappable part of + * I915_MEMORY_CLASS_DEVICE. + * + * Also note that since the kernel only supports flat-CCS on objects + * that can *only* be placed in I915_MEMORY_CLASS_DEVICE, we therefore + * don't support I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS together with + * flat-CCS. + * + * Without this hint, the kernel will assume that non-mappable + * I915_MEMORY_CLASS_DEVICE is preferred for this object. Note that the + * kernel can still migrate the object to the mappable part, as a last + * resort, if userspace ever CPU faults this object, but this might be + * expensive, and so ideally should be avoided. + * + * On older kernels which lack the relevant small-bar uAPI support (see + * also &drm_i915_memory_region_info.probed_cpu_visible_size), + * usage of the flag will result in an error, but it should NEVER be + * possible to end up with a small BAR configuration, assuming we can + * also successfully load the i915 kernel module. In such cases the + * entire I915_MEMORY_CLASS_DEVICE region will be CPU accessible, and as + * such there are zero restrictions on where the object can be placed. + */ +#define I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS (1 << 0) + __u32 flags; + + /** + * @extensions: The chain of extensions to apply to this object. + * + * This will be useful in the future when we need to support several + * different extensions, and we need to apply more than one when + * creating the object. See struct i915_user_extension. + * + * If we don't supply any extensions then we get the same old gem_create + * behaviour. + * + * For I915_GEM_CREATE_EXT_MEMORY_REGIONS usage see + * struct drm_i915_gem_create_ext_memory_regions. + * + * For I915_GEM_CREATE_EXT_PROTECTED_CONTENT usage see + * struct drm_i915_gem_create_ext_protected_content. + * + * For I915_GEM_CREATE_EXT_SET_PAT usage see + * struct drm_i915_gem_create_ext_set_pat. + */ +#define I915_GEM_CREATE_EXT_MEMORY_REGIONS 0 +#define I915_GEM_CREATE_EXT_PROTECTED_CONTENT 1 +#define I915_GEM_CREATE_EXT_SET_PAT 2 + __u64 extensions; +}; + +/** + * struct drm_i915_gem_create_ext_memory_regions - The + * I915_GEM_CREATE_EXT_MEMORY_REGIONS extension. + * + * Set the object with the desired set of placements/regions in priority + * order. Each entry must be unique and supported by the device. + * + * This is provided as an array of struct drm_i915_gem_memory_class_instance, or + * an equivalent layout of class:instance pair encodings. See struct + * drm_i915_query_memory_regions and DRM_I915_QUERY_MEMORY_REGIONS for how to + * query the supported regions for a device. + * + * As an example, on discrete devices, if we wish to set the placement as + * device local-memory we can do something like: + * + * .. code-block:: C + * + * struct drm_i915_gem_memory_class_instance region_lmem = { + * .memory_class = I915_MEMORY_CLASS_DEVICE, + * .memory_instance = 0, + * }; + * struct drm_i915_gem_create_ext_memory_regions regions = { + * .base = { .name = I915_GEM_CREATE_EXT_MEMORY_REGIONS }, + * .regions = (uintptr_t)®ion_lmem, + * .num_regions = 1, + * }; + * struct drm_i915_gem_create_ext create_ext = { + * .size = 16 * PAGE_SIZE, + * .extensions = (uintptr_t)®ions, + * }; + * + * int err = ioctl(fd, DRM_IOCTL_I915_GEM_CREATE_EXT, &create_ext); + * if (err) ... + * + * At which point we get the object handle in &drm_i915_gem_create_ext.handle, + * along with the final object size in &drm_i915_gem_create_ext.size, which + * should account for any rounding up, if required. + * + * Note that userspace has no means of knowing the current backing region + * for objects where @num_regions is larger than one. The kernel will only + * ensure that the priority order of the @regions array is honoured, either + * when initially placing the object, or when moving memory around due to + * memory pressure + * + * On Flat-CCS capable HW, compression is supported for the objects residing + * in I915_MEMORY_CLASS_DEVICE. When such objects (compressed) have other + * memory class in @regions and migrated (by i915, due to memory + * constraints) to the non I915_MEMORY_CLASS_DEVICE region, then i915 needs to + * decompress the content. But i915 doesn't have the required information to + * decompress the userspace compressed objects. + * + * So i915 supports Flat-CCS, on the objects which can reside only on + * I915_MEMORY_CLASS_DEVICE regions. + */ +struct drm_i915_gem_create_ext_memory_regions { + /** @base: Extension link. See struct i915_user_extension. */ + struct i915_user_extension base; + + /** @pad: MBZ */ + __u32 pad; + /** @num_regions: Number of elements in the @regions array. */ + __u32 num_regions; + /** + * @regions: The regions/placements array. + * + * An array of struct drm_i915_gem_memory_class_instance. + */ + __u64 regions; +}; + +/** + * struct drm_i915_gem_create_ext_protected_content - The + * I915_OBJECT_PARAM_PROTECTED_CONTENT extension. + * + * If this extension is provided, buffer contents are expected to be protected + * by PXP encryption and require decryption for scan out and processing. This + * is only possible on platforms that have PXP enabled, on all other scenarios + * using this extension will cause the ioctl to fail and return -ENODEV. The + * flags parameter is reserved for future expansion and must currently be set + * to zero. + * + * The buffer contents are considered invalid after a PXP session teardown. + * + * The encryption is guaranteed to be processed correctly only if the object + * is submitted with a context created using the + * I915_CONTEXT_PARAM_PROTECTED_CONTENT flag. This will also enable extra checks + * at submission time on the validity of the objects involved. + * + * Below is an example on how to create a protected object: + * + * .. code-block:: C + * + * struct drm_i915_gem_create_ext_protected_content protected_ext = { + * .base = { .name = I915_GEM_CREATE_EXT_PROTECTED_CONTENT }, + * .flags = 0, + * }; + * struct drm_i915_gem_create_ext create_ext = { + * .size = PAGE_SIZE, + * .extensions = (uintptr_t)&protected_ext, + * }; + * + * int err = ioctl(fd, DRM_IOCTL_I915_GEM_CREATE_EXT, &create_ext); + * if (err) ... + */ +struct drm_i915_gem_create_ext_protected_content { + /** @base: Extension link. See struct i915_user_extension. */ + struct i915_user_extension base; + /** @flags: reserved for future usage, currently MBZ */ + __u32 flags; +}; + +/** + * struct drm_i915_gem_create_ext_set_pat - The + * I915_GEM_CREATE_EXT_SET_PAT extension. + * + * If this extension is provided, the specified caching policy (PAT index) is + * applied to the buffer object. + * + * Below is an example on how to create an object with specific caching policy: + * + * .. code-block:: C + * + * struct drm_i915_gem_create_ext_set_pat set_pat_ext = { + * .base = { .name = I915_GEM_CREATE_EXT_SET_PAT }, + * .pat_index = 0, + * }; + * struct drm_i915_gem_create_ext create_ext = { + * .size = PAGE_SIZE, + * .extensions = (uintptr_t)&set_pat_ext, + * }; + * + * int err = ioctl(fd, DRM_IOCTL_I915_GEM_CREATE_EXT, &create_ext); + * if (err) ... + */ +struct drm_i915_gem_create_ext_set_pat { + /** @base: Extension link. See struct i915_user_extension. */ + struct i915_user_extension base; + /** + * @pat_index: PAT index to be set + * PAT index is a bit field in Page Table Entry to control caching + * behaviors for GPU accesses. The definition of PAT index is + * platform dependent and can be found in hardware specifications, + */ + __u32 pat_index; + /** @rsvd: reserved for future use */ + __u32 rsvd; +}; + +/* ID of the protected content session managed by i915 when PXP is active */ +#define I915_PROTECTED_CONTENT_DEFAULT_SESSION 0xf + +#if defined(__cplusplus) +} +#endif + +#endif /* _UAPI_I915_DRM_H_ */ |