diff options
Diffstat (limited to 'lib/Kconfig')
| -rw-r--r-- | lib/Kconfig | 766 |
1 files changed, 766 insertions, 0 deletions
diff --git a/lib/Kconfig b/lib/Kconfig new file mode 100644 index 0000000000..c686f4adc1 --- /dev/null +++ b/lib/Kconfig @@ -0,0 +1,766 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Library configuration +# + +config BINARY_PRINTF + def_bool n + +menu "Library routines" + +config RAID6_PQ + tristate + +config RAID6_PQ_BENCHMARK + bool "Automatically choose fastest RAID6 PQ functions" + depends on RAID6_PQ + default y + help + Benchmark all available RAID6 PQ functions on init and choose the + fastest one. + +config LINEAR_RANGES + tristate + +config PACKING + bool "Generic bitfield packing and unpacking" + select BITREVERSE + default n + help + This option provides the packing() helper function, which permits + converting bitfields between a CPU-usable representation and a + memory representation that can have any combination of these quirks: + - Is little endian (bytes are reversed within a 32-bit group) + - The least-significant 32-bit word comes first (within a 64-bit + group) + - The most significant bit of a byte is at its right (bit 0 of a + register description is numerically 2^7). + Drivers may use these helpers to match the bit indices as described + in the data sheets of the peripherals they are in control of. + + When in doubt, say N. + +config BITREVERSE + tristate + +config HAVE_ARCH_BITREVERSE + bool + default n + help + This option enables the use of hardware bit-reversal instructions on + architectures which support such operations. + +config ARCH_HAS_STRNCPY_FROM_USER + bool + +config ARCH_HAS_STRNLEN_USER + bool + +config GENERIC_STRNCPY_FROM_USER + def_bool !ARCH_HAS_STRNCPY_FROM_USER + +config GENERIC_STRNLEN_USER + def_bool !ARCH_HAS_STRNLEN_USER + +config GENERIC_NET_UTILS + bool + +source "lib/math/Kconfig" + +config NO_GENERIC_PCI_IOPORT_MAP + bool + +config GENERIC_PCI_IOMAP + bool + +config GENERIC_IOMAP + bool + select GENERIC_PCI_IOMAP + +config STMP_DEVICE + bool + +config ARCH_USE_CMPXCHG_LOCKREF + bool + +config ARCH_HAS_FAST_MULTIPLIER + bool + +config ARCH_USE_SYM_ANNOTATIONS + bool + +config INDIRECT_PIO + bool "Access I/O in non-MMIO mode" + depends on ARM64 + depends on HAS_IOPORT + help + On some platforms where no separate I/O space exists, there are I/O + hosts which can not be accessed in MMIO mode. Using the logical PIO + mechanism, the host-local I/O resource can be mapped into system + logic PIO space shared with MMIO hosts, such as PCI/PCIe, then the + system can access the I/O devices with the mapped-logic PIO through + I/O accessors. + + This way has relatively little I/O performance cost. Please make + sure your devices really need this configure item enabled. + + When in doubt, say N. + +config INDIRECT_IOMEM + bool + help + This is selected by other options/architectures to provide the + emulated iomem accessors. + +config INDIRECT_IOMEM_FALLBACK + bool + depends on INDIRECT_IOMEM + help + If INDIRECT_IOMEM is selected, this enables falling back to plain + mmio accesses when the IO memory address is not a registered + emulated region. + +config TRACE_MMIO_ACCESS + bool "Register read/write tracing" + depends on TRACING && ARCH_HAVE_TRACE_MMIO_ACCESS + help + Create tracepoints for MMIO read/write operations. These trace events + can be used for logging all MMIO read/write operations. + +source "lib/crypto/Kconfig" + +config CRC_CCITT + tristate "CRC-CCITT functions" + help + This option is provided for the case where no in-kernel-tree + modules require CRC-CCITT functions, but a module built outside + the kernel tree does. Such modules that use library CRC-CCITT + functions require M here. + +config CRC16 + tristate "CRC16 functions" + help + This option is provided for the case where no in-kernel-tree + modules require CRC16 functions, but a module built outside + the kernel tree does. Such modules that use library CRC16 + functions require M here. + +config CRC_T10DIF + tristate "CRC calculation for the T10 Data Integrity Field" + select CRYPTO + select CRYPTO_CRCT10DIF + help + This option is only needed if a module that's not in the + kernel tree needs to calculate CRC checks for use with the + SCSI data integrity subsystem. + +config CRC64_ROCKSOFT + tristate "CRC calculation for the Rocksoft model CRC64" + select CRC64 + select CRYPTO + select CRYPTO_CRC64_ROCKSOFT + help + This option provides a CRC64 API to a registered crypto driver. + This is used with the block layer's data integrity subsystem. + +config CRC_ITU_T + tristate "CRC ITU-T V.41 functions" + help + This option is provided for the case where no in-kernel-tree + modules require CRC ITU-T V.41 functions, but a module built outside + the kernel tree does. Such modules that use library CRC ITU-T V.41 + functions require M here. + +config CRC32 + tristate "CRC32/CRC32c functions" + default y + select BITREVERSE + help + This option is provided for the case where no in-kernel-tree + modules require CRC32/CRC32c functions, but a module built outside + the kernel tree does. Such modules that use library CRC32/CRC32c + functions require M here. + +config CRC32_SELFTEST + tristate "CRC32 perform self test on init" + depends on CRC32 + help + This option enables the CRC32 library functions to perform a + self test on initialization. The self test computes crc32_le + and crc32_be over byte strings with random alignment and length + and computes the total elapsed time and number of bytes processed. + +choice + prompt "CRC32 implementation" + depends on CRC32 + default CRC32_SLICEBY8 + help + This option allows a kernel builder to override the default choice + of CRC32 algorithm. Choose the default ("slice by 8") unless you + know that you need one of the others. + +config CRC32_SLICEBY8 + bool "Slice by 8 bytes" + help + Calculate checksum 8 bytes at a time with a clever slicing algorithm. + This is the fastest algorithm, but comes with a 8KiB lookup table. + Most modern processors have enough cache to hold this table without + thrashing the cache. + + This is the default implementation choice. Choose this one unless + you have a good reason not to. + +config CRC32_SLICEBY4 + bool "Slice by 4 bytes" + help + Calculate checksum 4 bytes at a time with a clever slicing algorithm. + This is a bit slower than slice by 8, but has a smaller 4KiB lookup + table. + + Only choose this option if you know what you are doing. + +config CRC32_SARWATE + bool "Sarwate's Algorithm (one byte at a time)" + help + Calculate checksum a byte at a time using Sarwate's algorithm. This + is not particularly fast, but has a small 256 byte lookup table. + + Only choose this option if you know what you are doing. + +config CRC32_BIT + bool "Classic Algorithm (one bit at a time)" + help + Calculate checksum one bit at a time. This is VERY slow, but has + no lookup table. This is provided as a debugging option. + + Only choose this option if you are debugging crc32. + +endchoice + +config CRC64 + tristate "CRC64 functions" + help + This option is provided for the case where no in-kernel-tree + modules require CRC64 functions, but a module built outside + the kernel tree does. Such modules that use library CRC64 + functions require M here. + +config CRC4 + tristate "CRC4 functions" + help + This option is provided for the case where no in-kernel-tree + modules require CRC4 functions, but a module built outside + the kernel tree does. Such modules that use library CRC4 + functions require M here. + +config CRC7 + tristate "CRC7 functions" + help + This option is provided for the case where no in-kernel-tree + modules require CRC7 functions, but a module built outside + the kernel tree does. Such modules that use library CRC7 + functions require M here. + +config LIBCRC32C + tristate "CRC32c (Castagnoli, et al) Cyclic Redundancy-Check" + select CRYPTO + select CRYPTO_CRC32C + help + This option is provided for the case where no in-kernel-tree + modules require CRC32c functions, but a module built outside the + kernel tree does. Such modules that use library CRC32c functions + require M here. See Castagnoli93. + Module will be libcrc32c. + +config CRC8 + tristate "CRC8 function" + help + This option provides CRC8 function. Drivers may select this + when they need to do cyclic redundancy check according CRC8 + algorithm. Module will be called crc8. + +config XXHASH + tristate + +config AUDIT_GENERIC + bool + depends on AUDIT && !AUDIT_ARCH + default y + +config AUDIT_ARCH_COMPAT_GENERIC + bool + default n + +config AUDIT_COMPAT_GENERIC + bool + depends on AUDIT_GENERIC && AUDIT_ARCH_COMPAT_GENERIC && COMPAT + default y + +config RANDOM32_SELFTEST + bool "PRNG perform self test on init" + help + This option enables the 32 bit PRNG library functions to perform a + self test on initialization. + +# +# compression support is select'ed if needed +# +config 842_COMPRESS + select CRC32 + tristate + +config 842_DECOMPRESS + select CRC32 + tristate + +config ZLIB_INFLATE + tristate + +config ZLIB_DEFLATE + tristate + select BITREVERSE + +config ZLIB_DFLTCC + def_bool y + depends on S390 + prompt "Enable s390x DEFLATE CONVERSION CALL support for kernel zlib" + help + Enable s390x hardware support for zlib in the kernel. + +config LZO_COMPRESS + tristate + +config LZO_DECOMPRESS + tristate + +config LZ4_COMPRESS + tristate + +config LZ4HC_COMPRESS + tristate + +config LZ4_DECOMPRESS + tristate + +config ZSTD_COMMON + select XXHASH + tristate + +config ZSTD_COMPRESS + select ZSTD_COMMON + tristate + +config ZSTD_DECOMPRESS + select ZSTD_COMMON + tristate + +source "lib/xz/Kconfig" + +# +# These all provide a common interface (hence the apparent duplication with +# ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.) +# +config DECOMPRESS_GZIP + select ZLIB_INFLATE + tristate + +config DECOMPRESS_BZIP2 + tristate + +config DECOMPRESS_LZMA + tristate + +config DECOMPRESS_XZ + select XZ_DEC + tristate + +config DECOMPRESS_LZO + select LZO_DECOMPRESS + tristate + +config DECOMPRESS_LZ4 + select LZ4_DECOMPRESS + tristate + +config DECOMPRESS_ZSTD + select ZSTD_DECOMPRESS + tristate + +# +# Generic allocator support is selected if needed +# +config GENERIC_ALLOCATOR + bool + +# +# reed solomon support is select'ed if needed +# +config REED_SOLOMON + tristate + +config REED_SOLOMON_ENC8 + bool + +config REED_SOLOMON_DEC8 + bool + +config REED_SOLOMON_ENC16 + bool + +config REED_SOLOMON_DEC16 + bool + +# +# BCH support is selected if needed +# +config BCH + tristate + select BITREVERSE + +config BCH_CONST_PARAMS + bool + help + Drivers may select this option to force specific constant + values for parameters 'm' (Galois field order) and 't' + (error correction capability). Those specific values must + be set by declaring default values for symbols BCH_CONST_M + and BCH_CONST_T. + Doing so will enable extra compiler optimizations, + improving encoding and decoding performance up to 2x for + usual (m,t) values (typically such that m*t < 200). + When this option is selected, the BCH library supports + only a single (m,t) configuration. This is mainly useful + for NAND flash board drivers requiring known, fixed BCH + parameters. + +config BCH_CONST_M + int + range 5 15 + help + Constant value for Galois field order 'm'. If 'k' is the + number of data bits to protect, 'm' should be chosen such + that (k + m*t) <= 2**m - 1. + Drivers should declare a default value for this symbol if + they select option BCH_CONST_PARAMS. + +config BCH_CONST_T + int + help + Constant value for error correction capability in bits 't'. + Drivers should declare a default value for this symbol if + they select option BCH_CONST_PARAMS. + +# +# Textsearch support is select'ed if needed +# +config TEXTSEARCH + bool + +config TEXTSEARCH_KMP + tristate + +config TEXTSEARCH_BM + tristate + +config TEXTSEARCH_FSM + tristate + +config BTREE + bool + +config INTERVAL_TREE + bool + help + Simple, embeddable, interval-tree. Can find the start of an + overlapping range in log(n) time and then iterate over all + overlapping nodes. The algorithm is implemented as an + augmented rbtree. + + See: + + Documentation/core-api/rbtree.rst + + for more information. + +config INTERVAL_TREE_SPAN_ITER + bool + depends on INTERVAL_TREE + +config XARRAY_MULTI + bool + help + Support entries which occupy multiple consecutive indices in the + XArray. + +config ASSOCIATIVE_ARRAY + bool + help + Generic associative array. Can be searched and iterated over whilst + it is being modified. It is also reasonably quick to search and + modify. The algorithms are non-recursive, and the trees are highly + capacious. + + See: + + Documentation/core-api/assoc_array.rst + + for more information. + +config HAS_IOMEM + bool + depends on !NO_IOMEM + default y + +config HAS_IOPORT + bool + +config HAS_IOPORT_MAP + bool + depends on HAS_IOMEM && !NO_IOPORT_MAP + default y + +source "kernel/dma/Kconfig" + +config SGL_ALLOC + bool + default n + +config IOMMU_HELPER + bool + +config CHECK_SIGNATURE + bool + +config CPUMASK_OFFSTACK + bool "Force CPU masks off stack" if DEBUG_PER_CPU_MAPS + help + Use dynamic allocation for cpumask_var_t, instead of putting + them on the stack. This is a bit more expensive, but avoids + stack overflow. + +config FORCE_NR_CPUS + bool "Set number of CPUs at compile time" + depends on SMP && EXPERT && !COMPILE_TEST + help + Say Yes if you have NR_CPUS set to an actual number of possible + CPUs in your system, not to a default value. This forces the core + code to rely on compile-time value and optimize kernel routines + better. + +config CPU_RMAP + bool + depends on SMP + +config DQL + bool + +config GLOB + bool +# This actually supports modular compilation, but the module overhead +# is ridiculous for the amount of code involved. Until an out-of-tree +# driver asks for it, we'll just link it directly it into the kernel +# when required. Since we're ignoring out-of-tree users, there's also +# no need bother prompting for a manual decision: +# prompt "glob_match() function" + help + This option provides a glob_match function for performing + simple text pattern matching. It originated in the ATA code + to blacklist particular drive models, but other device drivers + may need similar functionality. + + All drivers in the Linux kernel tree that require this function + should automatically select this option. Say N unless you + are compiling an out-of tree driver which tells you that it + depends on this. + +config GLOB_SELFTEST + tristate "glob self-test on init" + depends on GLOB + help + This option enables a simple self-test of the glob_match + function on startup. It is primarily useful for people + working on the code to ensure they haven't introduced any + regressions. + + It only adds a little bit of code and slows kernel boot (or + module load) by a small amount, so you're welcome to play with + it, but you probably don't need it. + +# +# Netlink attribute parsing support is select'ed if needed +# +config NLATTR + bool + +# +# Generic 64-bit atomic support is selected if needed +# +config GENERIC_ATOMIC64 + bool + +config LRU_CACHE + tristate + +config CLZ_TAB + bool + +config IRQ_POLL + bool "IRQ polling library" + help + Helper library to poll interrupt mitigation using polling. + +config MPILIB + tristate + select CLZ_TAB + help + Multiprecision maths library from GnuPG. + It is used to implement RSA digital signature verification, + which is used by IMA/EVM digital signature extension. + +config SIGNATURE + tristate + depends on KEYS + select CRYPTO + select CRYPTO_SHA1 + select MPILIB + help + Digital signature verification. Currently only RSA is supported. + Implementation is done using GnuPG MPI library + +config DIMLIB + bool + help + Dynamic Interrupt Moderation library. + Implements an algorithm for dynamically changing CQ moderation values + according to run time performance. + +# +# libfdt files, only selected if needed. +# +config LIBFDT + bool + +config OID_REGISTRY + tristate + help + Enable fast lookup object identifier registry. + +config UCS2_STRING + tristate + +# +# generic vdso +# +source "lib/vdso/Kconfig" + +source "lib/fonts/Kconfig" + +config SG_SPLIT + def_bool n + help + Provides a helper to split scatterlists into chunks, each chunk being + a scatterlist. This should be selected by a driver or an API which + whishes to split a scatterlist amongst multiple DMA channels. + +config SG_POOL + def_bool n + help + Provides a helper to allocate chained scatterlists. This should be + selected by a driver or an API which whishes to allocate chained + scatterlist. + +# +# sg chaining option +# + +config ARCH_NO_SG_CHAIN + def_bool n + +config ARCH_HAS_PMEM_API + bool + +config MEMREGION + bool + +config ARCH_HAS_CPU_CACHE_INVALIDATE_MEMREGION + bool + +config ARCH_HAS_MEMREMAP_COMPAT_ALIGN + bool + +# use memcpy to implement user copies for nommu architectures +config UACCESS_MEMCPY + bool + +config ARCH_HAS_UACCESS_FLUSHCACHE + bool + +# arch has a concept of a recoverable synchronous exception due to a +# memory-read error like x86 machine-check or ARM data-abort, and +# implements copy_mc_to_{user,kernel} to abort and report +# 'bytes-transferred' if that exception fires when accessing the source +# buffer. +config ARCH_HAS_COPY_MC + bool + +# Temporary. Goes away when all archs are cleaned up +config ARCH_STACKWALK + bool + +config STACKDEPOT + bool + select STACKTRACE + +config STACKDEPOT_ALWAYS_INIT + bool + select STACKDEPOT + +config REF_TRACKER + bool + depends on STACKTRACE_SUPPORT + select STACKDEPOT + +config SBITMAP + bool + +config PARMAN + tristate "parman" if COMPILE_TEST + +config OBJAGG + tristate "objagg" if COMPILE_TEST + +endmenu + +config GENERIC_IOREMAP + bool + +config GENERIC_LIB_ASHLDI3 + bool + +config GENERIC_LIB_ASHRDI3 + bool + +config GENERIC_LIB_LSHRDI3 + bool + +config GENERIC_LIB_MULDI3 + bool + +config GENERIC_LIB_CMPDI2 + bool + +config GENERIC_LIB_UCMPDI2 + bool + +config GENERIC_LIB_DEVMEM_IS_ALLOWED + bool + +config PLDMFW + bool + default n + +config ASN1_ENCODER + tristate + +config POLYNOMIAL + tristate |