diff options
Diffstat (limited to 'lib/rcuref.c')
| -rw-r--r-- | lib/rcuref.c | 281 |
1 files changed, 281 insertions, 0 deletions
diff --git a/lib/rcuref.c b/lib/rcuref.c new file mode 100644 index 0000000000..5ec00a4a64 --- /dev/null +++ b/lib/rcuref.c @@ -0,0 +1,281 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/* + * rcuref - A scalable reference count implementation for RCU managed objects + * + * rcuref is provided to replace open coded reference count implementations + * based on atomic_t. It protects explicitely RCU managed objects which can + * be visible even after the last reference has been dropped and the object + * is heading towards destruction. + * + * A common usage pattern is: + * + * get() + * rcu_read_lock(); + * p = get_ptr(); + * if (p && !atomic_inc_not_zero(&p->refcnt)) + * p = NULL; + * rcu_read_unlock(); + * return p; + * + * put() + * if (!atomic_dec_return(&->refcnt)) { + * remove_ptr(p); + * kfree_rcu((p, rcu); + * } + * + * atomic_inc_not_zero() is implemented with a try_cmpxchg() loop which has + * O(N^2) behaviour under contention with N concurrent operations. + * + * rcuref uses atomic_add_negative_relaxed() for the fast path, which scales + * better under contention. + * + * Why not refcount? + * ================= + * + * In principle it should be possible to make refcount use the rcuref + * scheme, but the destruction race described below cannot be prevented + * unless the protected object is RCU managed. + * + * Theory of operation + * =================== + * + * rcuref uses an unsigned integer reference counter. As long as the + * counter value is greater than or equal to RCUREF_ONEREF and not larger + * than RCUREF_MAXREF the reference is alive: + * + * ONEREF MAXREF SATURATED RELEASED DEAD NOREF + * 0 0x7FFFFFFF 0x8000000 0xA0000000 0xBFFFFFFF 0xC0000000 0xE0000000 0xFFFFFFFF + * <---valid --------> <-------saturation zone-------> <-----dead zone-----> + * + * The get() and put() operations do unconditional increments and + * decrements. The result is checked after the operation. This optimizes + * for the fast path. + * + * If the reference count is saturated or dead, then the increments and + * decrements are not harmful as the reference count still stays in the + * respective zones and is always set back to STATURATED resp. DEAD. The + * zones have room for 2^28 racing operations in each direction, which + * makes it practically impossible to escape the zones. + * + * Once the last reference is dropped the reference count becomes + * RCUREF_NOREF which forces rcuref_put() into the slowpath operation. The + * slowpath then tries to set the reference count from RCUREF_NOREF to + * RCUREF_DEAD via a cmpxchg(). This opens a small window where a + * concurrent rcuref_get() can acquire the reference count and bring it + * back to RCUREF_ONEREF or even drop the reference again and mark it DEAD. + * + * If the cmpxchg() succeeds then a concurrent rcuref_get() will result in + * DEAD + 1, which is inside the dead zone. If that happens the reference + * count is put back to DEAD. + * + * The actual race is possible due to the unconditional increment and + * decrements in rcuref_get() and rcuref_put(): + * + * T1 T2 + * get() put() + * if (atomic_add_negative(-1, &ref->refcnt)) + * succeeds-> atomic_cmpxchg(&ref->refcnt, NOREF, DEAD); + * + * atomic_add_negative(1, &ref->refcnt); <- Elevates refcount to DEAD + 1 + * + * As the result of T1's add is negative, the get() goes into the slow path + * and observes refcnt being in the dead zone which makes the operation fail. + * + * Possible critical states: + * + * Context Counter References Operation + * T1 0 1 init() + * T2 1 2 get() + * T1 0 1 put() + * T2 -1 0 put() tries to mark dead + * T1 0 1 get() + * T2 0 1 put() mark dead fails + * T1 -1 0 put() tries to mark dead + * T1 DEAD 0 put() mark dead succeeds + * T2 DEAD+1 0 get() fails and puts it back to DEAD + * + * Of course there are more complex scenarios, but the above illustrates + * the working principle. The rest is left to the imagination of the + * reader. + * + * Deconstruction race + * =================== + * + * The release operation must be protected by prohibiting a grace period in + * order to prevent a possible use after free: + * + * T1 T2 + * put() get() + * // ref->refcnt = ONEREF + * if (!atomic_add_negative(-1, &ref->refcnt)) + * return false; <- Not taken + * + * // ref->refcnt == NOREF + * --> preemption + * // Elevates ref->refcnt to ONEREF + * if (!atomic_add_negative(1, &ref->refcnt)) + * return true; <- taken + * + * if (put(&p->ref)) { <-- Succeeds + * remove_pointer(p); + * kfree_rcu(p, rcu); + * } + * + * RCU grace period ends, object is freed + * + * atomic_cmpxchg(&ref->refcnt, NOREF, DEAD); <- UAF + * + * This is prevented by disabling preemption around the put() operation as + * that's in most kernel configurations cheaper than a rcu_read_lock() / + * rcu_read_unlock() pair and in many cases even a NOOP. In any case it + * prevents the grace period which keeps the object alive until all put() + * operations complete. + * + * Saturation protection + * ===================== + * + * The reference count has a saturation limit RCUREF_MAXREF (INT_MAX). + * Once this is exceedded the reference count becomes stale by setting it + * to RCUREF_SATURATED, which will cause a memory leak, but it prevents + * wrap arounds which obviously cause worse problems than a memory + * leak. When saturation is reached a warning is emitted. + * + * Race conditions + * =============== + * + * All reference count increment/decrement operations are unconditional and + * only verified after the fact. This optimizes for the good case and takes + * the occasional race vs. a dead or already saturated refcount into + * account. The saturation and dead zones are large enough to accomodate + * for that. + * + * Memory ordering + * =============== + * + * Memory ordering rules are slightly relaxed wrt regular atomic_t functions + * and provide only what is strictly required for refcounts. + * + * The increments are fully relaxed; these will not provide ordering. The + * rationale is that whatever is used to obtain the object to increase the + * reference count on will provide the ordering. For locked data + * structures, its the lock acquire, for RCU/lockless data structures its + * the dependent load. + * + * rcuref_get() provides a control dependency ordering future stores which + * ensures that the object is not modified when acquiring a reference + * fails. + * + * rcuref_put() provides release order, i.e. all prior loads and stores + * will be issued before. It also provides a control dependency ordering + * against the subsequent destruction of the object. + * + * If rcuref_put() successfully dropped the last reference and marked the + * object DEAD it also provides acquire ordering. + */ + +#include <linux/export.h> +#include <linux/rcuref.h> + +/** + * rcuref_get_slowpath - Slowpath of rcuref_get() + * @ref: Pointer to the reference count + * + * Invoked when the reference count is outside of the valid zone. + * + * Return: + * False if the reference count was already marked dead + * + * True if the reference count is saturated, which prevents the + * object from being deconstructed ever. + */ +bool rcuref_get_slowpath(rcuref_t *ref) +{ + unsigned int cnt = atomic_read(&ref->refcnt); + + /* + * If the reference count was already marked dead, undo the + * increment so it stays in the middle of the dead zone and return + * fail. + */ + if (cnt >= RCUREF_RELEASED) { + atomic_set(&ref->refcnt, RCUREF_DEAD); + return false; + } + + /* + * If it was saturated, warn and mark it so. In case the increment + * was already on a saturated value restore the saturation + * marker. This keeps it in the middle of the saturation zone and + * prevents the reference count from overflowing. This leaks the + * object memory, but prevents the obvious reference count overflow + * damage. + */ + if (WARN_ONCE(cnt > RCUREF_MAXREF, "rcuref saturated - leaking memory")) + atomic_set(&ref->refcnt, RCUREF_SATURATED); + return true; +} +EXPORT_SYMBOL_GPL(rcuref_get_slowpath); + +/** + * rcuref_put_slowpath - Slowpath of __rcuref_put() + * @ref: Pointer to the reference count + * + * Invoked when the reference count is outside of the valid zone. + * + * Return: + * True if this was the last reference with no future references + * possible. This signals the caller that it can safely schedule the + * object, which is protected by the reference counter, for + * deconstruction. + * + * False if there are still active references or the put() raced + * with a concurrent get()/put() pair. Caller is not allowed to + * deconstruct the protected object. + */ +bool rcuref_put_slowpath(rcuref_t *ref) +{ + unsigned int cnt = atomic_read(&ref->refcnt); + + /* Did this drop the last reference? */ + if (likely(cnt == RCUREF_NOREF)) { + /* + * Carefully try to set the reference count to RCUREF_DEAD. + * + * This can fail if a concurrent get() operation has + * elevated it again or the corresponding put() even marked + * it dead already. Both are valid situations and do not + * require a retry. If this fails the caller is not + * allowed to deconstruct the object. + */ + if (atomic_cmpxchg_release(&ref->refcnt, RCUREF_NOREF, RCUREF_DEAD) != RCUREF_NOREF) + return false; + + /* + * The caller can safely schedule the object for + * deconstruction. Provide acquire ordering. + */ + smp_acquire__after_ctrl_dep(); + return true; + } + + /* + * If the reference count was already in the dead zone, then this + * put() operation is imbalanced. Warn, put the reference count back to + * DEAD and tell the caller to not deconstruct the object. + */ + if (WARN_ONCE(cnt >= RCUREF_RELEASED, "rcuref - imbalanced put()")) { + atomic_set(&ref->refcnt, RCUREF_DEAD); + return false; + } + + /* + * This is a put() operation on a saturated refcount. Restore the + * mean saturation value and tell the caller to not deconstruct the + * object. + */ + if (cnt > RCUREF_MAXREF) + atomic_set(&ref->refcnt, RCUREF_SATURATED); + return false; +} +EXPORT_SYMBOL_GPL(rcuref_put_slowpath); |