diff options
Diffstat (limited to 'net/mac80211/main.c')
| -rw-r--r-- | net/mac80211/main.c | 1616 |
1 files changed, 1616 insertions, 0 deletions
diff --git a/net/mac80211/main.c b/net/mac80211/main.c new file mode 100644 index 0000000000..4548f84451 --- /dev/null +++ b/net/mac80211/main.c @@ -0,0 +1,1616 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2002-2005, Instant802 Networks, Inc. + * Copyright 2005-2006, Devicescape Software, Inc. + * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz> + * Copyright 2013-2014 Intel Mobile Communications GmbH + * Copyright (C) 2017 Intel Deutschland GmbH + * Copyright (C) 2018-2023 Intel Corporation + */ + +#include <net/mac80211.h> +#include <linux/module.h> +#include <linux/fips.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/skbuff.h> +#include <linux/etherdevice.h> +#include <linux/if_arp.h> +#include <linux/rtnetlink.h> +#include <linux/bitmap.h> +#include <linux/inetdevice.h> +#include <net/net_namespace.h> +#include <net/dropreason.h> +#include <net/cfg80211.h> +#include <net/addrconf.h> + +#include "ieee80211_i.h" +#include "driver-ops.h" +#include "rate.h" +#include "mesh.h" +#include "wep.h" +#include "led.h" +#include "debugfs.h" + +void ieee80211_configure_filter(struct ieee80211_local *local) +{ + u64 mc; + unsigned int changed_flags; + unsigned int new_flags = 0; + + if (atomic_read(&local->iff_allmultis)) + new_flags |= FIF_ALLMULTI; + + if (local->monitors || test_bit(SCAN_SW_SCANNING, &local->scanning) || + test_bit(SCAN_ONCHANNEL_SCANNING, &local->scanning)) + new_flags |= FIF_BCN_PRBRESP_PROMISC; + + if (local->fif_probe_req || local->probe_req_reg) + new_flags |= FIF_PROBE_REQ; + + if (local->fif_fcsfail) + new_flags |= FIF_FCSFAIL; + + if (local->fif_plcpfail) + new_flags |= FIF_PLCPFAIL; + + if (local->fif_control) + new_flags |= FIF_CONTROL; + + if (local->fif_other_bss) + new_flags |= FIF_OTHER_BSS; + + if (local->fif_pspoll) + new_flags |= FIF_PSPOLL; + + if (local->rx_mcast_action_reg) + new_flags |= FIF_MCAST_ACTION; + + spin_lock_bh(&local->filter_lock); + changed_flags = local->filter_flags ^ new_flags; + + mc = drv_prepare_multicast(local, &local->mc_list); + spin_unlock_bh(&local->filter_lock); + + /* be a bit nasty */ + new_flags |= (1<<31); + + drv_configure_filter(local, changed_flags, &new_flags, mc); + + WARN_ON(new_flags & (1<<31)); + + local->filter_flags = new_flags & ~(1<<31); +} + +static void ieee80211_reconfig_filter(struct work_struct *work) +{ + struct ieee80211_local *local = + container_of(work, struct ieee80211_local, reconfig_filter); + + ieee80211_configure_filter(local); +} + +static u32 ieee80211_hw_conf_chan(struct ieee80211_local *local) +{ + struct ieee80211_sub_if_data *sdata; + struct cfg80211_chan_def chandef = {}; + u32 changed = 0; + int power; + u32 offchannel_flag; + + offchannel_flag = local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL; + + if (local->scan_chandef.chan) { + chandef = local->scan_chandef; + } else if (local->tmp_channel) { + chandef.chan = local->tmp_channel; + chandef.width = NL80211_CHAN_WIDTH_20_NOHT; + chandef.center_freq1 = chandef.chan->center_freq; + chandef.freq1_offset = chandef.chan->freq_offset; + } else + chandef = local->_oper_chandef; + + WARN(!cfg80211_chandef_valid(&chandef), + "control:%d.%03d MHz width:%d center: %d.%03d/%d MHz", + chandef.chan->center_freq, chandef.chan->freq_offset, + chandef.width, chandef.center_freq1, chandef.freq1_offset, + chandef.center_freq2); + + if (!cfg80211_chandef_identical(&chandef, &local->_oper_chandef)) + local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL; + else + local->hw.conf.flags &= ~IEEE80211_CONF_OFFCHANNEL; + + offchannel_flag ^= local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL; + + if (offchannel_flag || + !cfg80211_chandef_identical(&local->hw.conf.chandef, + &local->_oper_chandef)) { + local->hw.conf.chandef = chandef; + changed |= IEEE80211_CONF_CHANGE_CHANNEL; + } + + if (!conf_is_ht(&local->hw.conf)) { + /* + * mac80211.h documents that this is only valid + * when the channel is set to an HT type, and + * that otherwise STATIC is used. + */ + local->hw.conf.smps_mode = IEEE80211_SMPS_STATIC; + } else if (local->hw.conf.smps_mode != local->smps_mode) { + local->hw.conf.smps_mode = local->smps_mode; + changed |= IEEE80211_CONF_CHANGE_SMPS; + } + + power = ieee80211_chandef_max_power(&chandef); + + rcu_read_lock(); + list_for_each_entry_rcu(sdata, &local->interfaces, list) { + if (!rcu_access_pointer(sdata->vif.bss_conf.chanctx_conf)) + continue; + if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) + continue; + if (sdata->vif.bss_conf.txpower == INT_MIN) + continue; + power = min(power, sdata->vif.bss_conf.txpower); + } + rcu_read_unlock(); + + if (local->hw.conf.power_level != power) { + changed |= IEEE80211_CONF_CHANGE_POWER; + local->hw.conf.power_level = power; + } + + return changed; +} + +int ieee80211_hw_config(struct ieee80211_local *local, u32 changed) +{ + int ret = 0; + + might_sleep(); + + if (!local->use_chanctx) + changed |= ieee80211_hw_conf_chan(local); + else + changed &= ~(IEEE80211_CONF_CHANGE_CHANNEL | + IEEE80211_CONF_CHANGE_POWER | + IEEE80211_CONF_CHANGE_SMPS); + + if (changed && local->open_count) { + ret = drv_config(local, changed); + /* + * Goal: + * HW reconfiguration should never fail, the driver has told + * us what it can support so it should live up to that promise. + * + * Current status: + * rfkill is not integrated with mac80211 and a + * configuration command can thus fail if hardware rfkill + * is enabled + * + * FIXME: integrate rfkill with mac80211 and then add this + * WARN_ON() back + * + */ + /* WARN_ON(ret); */ + } + + return ret; +} + +#define BSS_CHANGED_VIF_CFG_FLAGS (BSS_CHANGED_ASSOC |\ + BSS_CHANGED_IDLE |\ + BSS_CHANGED_PS |\ + BSS_CHANGED_IBSS |\ + BSS_CHANGED_ARP_FILTER |\ + BSS_CHANGED_SSID) + +void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata, + u64 changed) +{ + struct ieee80211_local *local = sdata->local; + + might_sleep(); + + if (!changed || sdata->vif.type == NL80211_IFTYPE_AP_VLAN) + return; + + if (WARN_ON_ONCE(changed & (BSS_CHANGED_BEACON | + BSS_CHANGED_BEACON_ENABLED) && + sdata->vif.type != NL80211_IFTYPE_AP && + sdata->vif.type != NL80211_IFTYPE_ADHOC && + sdata->vif.type != NL80211_IFTYPE_MESH_POINT && + sdata->vif.type != NL80211_IFTYPE_OCB)) + return; + + if (WARN_ON_ONCE(sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE || + sdata->vif.type == NL80211_IFTYPE_NAN || + (sdata->vif.type == NL80211_IFTYPE_MONITOR && + !sdata->vif.bss_conf.mu_mimo_owner && + !(changed & BSS_CHANGED_TXPOWER)))) + return; + + if (!check_sdata_in_driver(sdata)) + return; + + if (changed & BSS_CHANGED_VIF_CFG_FLAGS) { + u64 ch = changed & BSS_CHANGED_VIF_CFG_FLAGS; + + trace_drv_vif_cfg_changed(local, sdata, changed); + if (local->ops->vif_cfg_changed) + local->ops->vif_cfg_changed(&local->hw, &sdata->vif, ch); + } + + if (changed & ~BSS_CHANGED_VIF_CFG_FLAGS) { + u64 ch = changed & ~BSS_CHANGED_VIF_CFG_FLAGS; + + /* FIXME: should be for each link */ + trace_drv_link_info_changed(local, sdata, &sdata->vif.bss_conf, + changed); + if (local->ops->link_info_changed) + local->ops->link_info_changed(&local->hw, &sdata->vif, + &sdata->vif.bss_conf, ch); + } + + if (local->ops->bss_info_changed) + local->ops->bss_info_changed(&local->hw, &sdata->vif, + &sdata->vif.bss_conf, changed); + trace_drv_return_void(local); +} + +void ieee80211_vif_cfg_change_notify(struct ieee80211_sub_if_data *sdata, + u64 changed) +{ + struct ieee80211_local *local = sdata->local; + + WARN_ON_ONCE(changed & ~BSS_CHANGED_VIF_CFG_FLAGS); + + if (!changed || sdata->vif.type == NL80211_IFTYPE_AP_VLAN) + return; + + drv_vif_cfg_changed(local, sdata, changed); +} + +void ieee80211_link_info_change_notify(struct ieee80211_sub_if_data *sdata, + struct ieee80211_link_data *link, + u64 changed) +{ + struct ieee80211_local *local = sdata->local; + + WARN_ON_ONCE(changed & BSS_CHANGED_VIF_CFG_FLAGS); + + if (!changed || sdata->vif.type == NL80211_IFTYPE_AP_VLAN) + return; + + if (!check_sdata_in_driver(sdata)) + return; + + drv_link_info_changed(local, sdata, link->conf, link->link_id, changed); +} + +u64 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata) +{ + sdata->vif.bss_conf.use_cts_prot = false; + sdata->vif.bss_conf.use_short_preamble = false; + sdata->vif.bss_conf.use_short_slot = false; + return BSS_CHANGED_ERP_CTS_PROT | + BSS_CHANGED_ERP_PREAMBLE | + BSS_CHANGED_ERP_SLOT; +} + +static void ieee80211_tasklet_handler(struct tasklet_struct *t) +{ + struct ieee80211_local *local = from_tasklet(local, t, tasklet); + struct sk_buff *skb; + + while ((skb = skb_dequeue(&local->skb_queue)) || + (skb = skb_dequeue(&local->skb_queue_unreliable))) { + switch (skb->pkt_type) { + case IEEE80211_RX_MSG: + /* Clear skb->pkt_type in order to not confuse kernel + * netstack. */ + skb->pkt_type = 0; + ieee80211_rx(&local->hw, skb); + break; + case IEEE80211_TX_STATUS_MSG: + skb->pkt_type = 0; + ieee80211_tx_status(&local->hw, skb); + break; + default: + WARN(1, "mac80211: Packet is of unknown type %d\n", + skb->pkt_type); + dev_kfree_skb(skb); + break; + } + } +} + +static void ieee80211_restart_work(struct work_struct *work) +{ + struct ieee80211_local *local = + container_of(work, struct ieee80211_local, restart_work); + struct ieee80211_sub_if_data *sdata; + int ret; + + flush_workqueue(local->workqueue); + + rtnl_lock(); + /* we might do interface manipulations, so need both */ + wiphy_lock(local->hw.wiphy); + + WARN(test_bit(SCAN_HW_SCANNING, &local->scanning), + "%s called with hardware scan in progress\n", __func__); + + list_for_each_entry(sdata, &local->interfaces, list) { + /* + * XXX: there may be more work for other vif types and even + * for station mode: a good thing would be to run most of + * the iface type's dependent _stop (ieee80211_mg_stop, + * ieee80211_ibss_stop) etc... + * For now, fix only the specific bug that was seen: race + * between csa_connection_drop_work and us. + */ + if (sdata->vif.type == NL80211_IFTYPE_STATION) { + /* + * This worker is scheduled from the iface worker that + * runs on mac80211's workqueue, so we can't be + * scheduling this worker after the cancel right here. + * The exception is ieee80211_chswitch_done. + * Then we can have a race... + */ + wiphy_work_cancel(local->hw.wiphy, + &sdata->u.mgd.csa_connection_drop_work); + if (sdata->vif.bss_conf.csa_active) { + sdata_lock(sdata); + ieee80211_sta_connection_lost(sdata, + WLAN_REASON_UNSPECIFIED, + false); + sdata_unlock(sdata); + } + } + flush_delayed_work(&sdata->dec_tailroom_needed_wk); + } + ieee80211_scan_cancel(local); + + /* make sure any new ROC will consider local->in_reconfig */ + wiphy_delayed_work_flush(local->hw.wiphy, &local->roc_work); + wiphy_work_flush(local->hw.wiphy, &local->hw_roc_done); + + /* wait for all packet processing to be done */ + synchronize_net(); + + ret = ieee80211_reconfig(local); + wiphy_unlock(local->hw.wiphy); + + if (ret) + cfg80211_shutdown_all_interfaces(local->hw.wiphy); + + rtnl_unlock(); +} + +void ieee80211_restart_hw(struct ieee80211_hw *hw) +{ + struct ieee80211_local *local = hw_to_local(hw); + + trace_api_restart_hw(local); + + wiphy_info(hw->wiphy, + "Hardware restart was requested\n"); + + /* use this reason, ieee80211_reconfig will unblock it */ + ieee80211_stop_queues_by_reason(hw, IEEE80211_MAX_QUEUE_MAP, + IEEE80211_QUEUE_STOP_REASON_SUSPEND, + false); + + /* + * Stop all Rx during the reconfig. We don't want state changes + * or driver callbacks while this is in progress. + */ + local->in_reconfig = true; + barrier(); + + queue_work(system_freezable_wq, &local->restart_work); +} +EXPORT_SYMBOL(ieee80211_restart_hw); + +#ifdef CONFIG_INET +static int ieee80211_ifa_changed(struct notifier_block *nb, + unsigned long data, void *arg) +{ + struct in_ifaddr *ifa = arg; + struct ieee80211_local *local = + container_of(nb, struct ieee80211_local, + ifa_notifier); + struct net_device *ndev = ifa->ifa_dev->dev; + struct wireless_dev *wdev = ndev->ieee80211_ptr; + struct in_device *idev; + struct ieee80211_sub_if_data *sdata; + struct ieee80211_vif_cfg *vif_cfg; + struct ieee80211_if_managed *ifmgd; + int c = 0; + + /* Make sure it's our interface that got changed */ + if (!wdev) + return NOTIFY_DONE; + + if (wdev->wiphy != local->hw.wiphy) + return NOTIFY_DONE; + + sdata = IEEE80211_DEV_TO_SUB_IF(ndev); + vif_cfg = &sdata->vif.cfg; + + /* ARP filtering is only supported in managed mode */ + if (sdata->vif.type != NL80211_IFTYPE_STATION) + return NOTIFY_DONE; + + idev = __in_dev_get_rtnl(sdata->dev); + if (!idev) + return NOTIFY_DONE; + + ifmgd = &sdata->u.mgd; + sdata_lock(sdata); + + /* Copy the addresses to the vif config list */ + ifa = rtnl_dereference(idev->ifa_list); + while (ifa) { + if (c < IEEE80211_BSS_ARP_ADDR_LIST_LEN) + vif_cfg->arp_addr_list[c] = ifa->ifa_address; + ifa = rtnl_dereference(ifa->ifa_next); + c++; + } + + vif_cfg->arp_addr_cnt = c; + + /* Configure driver only if associated (which also implies it is up) */ + if (ifmgd->associated) + ieee80211_vif_cfg_change_notify(sdata, BSS_CHANGED_ARP_FILTER); + + sdata_unlock(sdata); + + return NOTIFY_OK; +} +#endif + +#if IS_ENABLED(CONFIG_IPV6) +static int ieee80211_ifa6_changed(struct notifier_block *nb, + unsigned long data, void *arg) +{ + struct inet6_ifaddr *ifa = (struct inet6_ifaddr *)arg; + struct inet6_dev *idev = ifa->idev; + struct net_device *ndev = ifa->idev->dev; + struct ieee80211_local *local = + container_of(nb, struct ieee80211_local, ifa6_notifier); + struct wireless_dev *wdev = ndev->ieee80211_ptr; + struct ieee80211_sub_if_data *sdata; + + /* Make sure it's our interface that got changed */ + if (!wdev || wdev->wiphy != local->hw.wiphy) + return NOTIFY_DONE; + + sdata = IEEE80211_DEV_TO_SUB_IF(ndev); + + /* + * For now only support station mode. This is mostly because + * doing AP would have to handle AP_VLAN in some way ... + */ + if (sdata->vif.type != NL80211_IFTYPE_STATION) + return NOTIFY_DONE; + + drv_ipv6_addr_change(local, sdata, idev); + + return NOTIFY_OK; +} +#endif + +/* There isn't a lot of sense in it, but you can transmit anything you like */ +static const struct ieee80211_txrx_stypes +ieee80211_default_mgmt_stypes[NUM_NL80211_IFTYPES] = { + [NL80211_IFTYPE_ADHOC] = { + .tx = 0xffff, + .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | + BIT(IEEE80211_STYPE_AUTH >> 4) | + BIT(IEEE80211_STYPE_DEAUTH >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4), + }, + [NL80211_IFTYPE_STATION] = { + .tx = 0xffff, + /* + * To support Pre Association Security Negotiation (PASN) while + * already associated to one AP, allow user space to register to + * Rx authentication frames, so that the user space logic would + * be able to receive/handle authentication frames from a + * different AP as part of PASN. + * It is expected that user space would intelligently register + * for Rx authentication frames, i.e., only when PASN is used + * and configure a match filter only for PASN authentication + * algorithm, as otherwise the MLME functionality of mac80211 + * would be broken. + */ + .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | + BIT(IEEE80211_STYPE_AUTH >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4), + }, + [NL80211_IFTYPE_AP] = { + .tx = 0xffff, + .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) | + BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4) | + BIT(IEEE80211_STYPE_DISASSOC >> 4) | + BIT(IEEE80211_STYPE_AUTH >> 4) | + BIT(IEEE80211_STYPE_DEAUTH >> 4) | + BIT(IEEE80211_STYPE_ACTION >> 4), + }, + [NL80211_IFTYPE_AP_VLAN] = { + /* copy AP */ + .tx = 0xffff, + .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) | + BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4) | + BIT(IEEE80211_STYPE_DISASSOC >> 4) | + BIT(IEEE80211_STYPE_AUTH >> 4) | + BIT(IEEE80211_STYPE_DEAUTH >> 4) | + BIT(IEEE80211_STYPE_ACTION >> 4), + }, + [NL80211_IFTYPE_P2P_CLIENT] = { + .tx = 0xffff, + .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4), + }, + [NL80211_IFTYPE_P2P_GO] = { + .tx = 0xffff, + .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) | + BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4) | + BIT(IEEE80211_STYPE_DISASSOC >> 4) | + BIT(IEEE80211_STYPE_AUTH >> 4) | + BIT(IEEE80211_STYPE_DEAUTH >> 4) | + BIT(IEEE80211_STYPE_ACTION >> 4), + }, + [NL80211_IFTYPE_MESH_POINT] = { + .tx = 0xffff, + .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | + BIT(IEEE80211_STYPE_AUTH >> 4) | + BIT(IEEE80211_STYPE_DEAUTH >> 4), + }, + [NL80211_IFTYPE_P2P_DEVICE] = { + .tx = 0xffff, + .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4), + }, +}; + +static const struct ieee80211_ht_cap mac80211_ht_capa_mod_mask = { + .ampdu_params_info = IEEE80211_HT_AMPDU_PARM_FACTOR | + IEEE80211_HT_AMPDU_PARM_DENSITY, + + .cap_info = cpu_to_le16(IEEE80211_HT_CAP_SUP_WIDTH_20_40 | + IEEE80211_HT_CAP_MAX_AMSDU | + IEEE80211_HT_CAP_SGI_20 | + IEEE80211_HT_CAP_SGI_40 | + IEEE80211_HT_CAP_TX_STBC | + IEEE80211_HT_CAP_RX_STBC | + IEEE80211_HT_CAP_LDPC_CODING | + IEEE80211_HT_CAP_40MHZ_INTOLERANT), + .mcs = { + .rx_mask = { 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, }, + }, +}; + +static const struct ieee80211_vht_cap mac80211_vht_capa_mod_mask = { + .vht_cap_info = + cpu_to_le32(IEEE80211_VHT_CAP_RXLDPC | + IEEE80211_VHT_CAP_SHORT_GI_80 | + IEEE80211_VHT_CAP_SHORT_GI_160 | + IEEE80211_VHT_CAP_RXSTBC_MASK | + IEEE80211_VHT_CAP_TXSTBC | + IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE | + IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE | + IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN | + IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN | + IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK), + .supp_mcs = { + .rx_mcs_map = cpu_to_le16(~0), + .tx_mcs_map = cpu_to_le16(~0), + }, +}; + +struct ieee80211_hw *ieee80211_alloc_hw_nm(size_t priv_data_len, + const struct ieee80211_ops *ops, + const char *requested_name) +{ + struct ieee80211_local *local; + int priv_size, i; + struct wiphy *wiphy; + bool use_chanctx; + + if (WARN_ON(!ops->tx || !ops->start || !ops->stop || !ops->config || + !ops->add_interface || !ops->remove_interface || + !ops->configure_filter || !ops->wake_tx_queue)) + return NULL; + + if (WARN_ON(ops->sta_state && (ops->sta_add || ops->sta_remove))) + return NULL; + + if (WARN_ON(!!ops->link_info_changed != !!ops->vif_cfg_changed || + (ops->link_info_changed && ops->bss_info_changed))) + return NULL; + + /* check all or no channel context operations exist */ + i = !!ops->add_chanctx + !!ops->remove_chanctx + + !!ops->change_chanctx + !!ops->assign_vif_chanctx + + !!ops->unassign_vif_chanctx; + if (WARN_ON(i != 0 && i != 5)) + return NULL; + use_chanctx = i == 5; + + /* Ensure 32-byte alignment of our private data and hw private data. + * We use the wiphy priv data for both our ieee80211_local and for + * the driver's private data + * + * In memory it'll be like this: + * + * +-------------------------+ + * | struct wiphy | + * +-------------------------+ + * | struct ieee80211_local | + * +-------------------------+ + * | driver's private data | + * +-------------------------+ + * + */ + priv_size = ALIGN(sizeof(*local), NETDEV_ALIGN) + priv_data_len; + + wiphy = wiphy_new_nm(&mac80211_config_ops, priv_size, requested_name); + + if (!wiphy) + return NULL; + + wiphy->mgmt_stypes = ieee80211_default_mgmt_stypes; + + wiphy->privid = mac80211_wiphy_privid; + + wiphy->flags |= WIPHY_FLAG_NETNS_OK | + WIPHY_FLAG_4ADDR_AP | + WIPHY_FLAG_4ADDR_STATION | + WIPHY_FLAG_REPORTS_OBSS | + WIPHY_FLAG_OFFCHAN_TX; + + if (!use_chanctx || ops->remain_on_channel) + wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL; + + wiphy->features |= NL80211_FEATURE_SK_TX_STATUS | + NL80211_FEATURE_SAE | + NL80211_FEATURE_HT_IBSS | + NL80211_FEATURE_VIF_TXPOWER | + NL80211_FEATURE_MAC_ON_CREATE | + NL80211_FEATURE_USERSPACE_MPM | + NL80211_FEATURE_FULL_AP_CLIENT_STATE; + wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_FILS_STA); + wiphy_ext_feature_set(wiphy, + NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211); + wiphy_ext_feature_set(wiphy, + NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH); + wiphy_ext_feature_set(wiphy, + NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS); + wiphy_ext_feature_set(wiphy, + NL80211_EXT_FEATURE_SCAN_FREQ_KHZ); + wiphy_ext_feature_set(wiphy, + NL80211_EXT_FEATURE_POWERED_ADDR_CHANGE); + + if (!ops->hw_scan) { + wiphy->features |= NL80211_FEATURE_LOW_PRIORITY_SCAN | + NL80211_FEATURE_AP_SCAN; + /* + * if the driver behaves correctly using the probe request + * (template) from mac80211, then both of these should be + * supported even with hw scan - but let drivers opt in. + */ + wiphy_ext_feature_set(wiphy, + NL80211_EXT_FEATURE_SCAN_RANDOM_SN); + wiphy_ext_feature_set(wiphy, + NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT); + } + + if (!ops->set_key) + wiphy->flags |= WIPHY_FLAG_IBSS_RSN; + + wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_TXQS); + wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_RRM); + + wiphy->bss_priv_size = sizeof(struct ieee80211_bss); + + local = wiphy_priv(wiphy); + + if (sta_info_init(local)) + goto err_free; + + local->hw.wiphy = wiphy; + + local->hw.priv = (char *)local + ALIGN(sizeof(*local), NETDEV_ALIGN); + + local->ops = ops; + local->use_chanctx = use_chanctx; + + /* + * We need a bit of data queued to build aggregates properly, so + * instruct the TCP stack to allow more than a single ms of data + * to be queued in the stack. The value is a bit-shift of 1 + * second, so 7 is ~8ms of queued data. Only affects local TCP + * sockets. + * This is the default, anyhow - drivers may need to override it + * for local reasons (longer buffers, longer completion time, or + * similar). + */ + local->hw.tx_sk_pacing_shift = 7; + + /* set up some defaults */ + local->hw.queues = 1; + local->hw.max_rates = 1; + local->hw.max_report_rates = 0; + local->hw.max_rx_aggregation_subframes = IEEE80211_MAX_AMPDU_BUF_HT; + local->hw.max_tx_aggregation_subframes = IEEE80211_MAX_AMPDU_BUF_HT; + local->hw.offchannel_tx_hw_queue = IEEE80211_INVAL_HW_QUEUE; + local->hw.conf.long_frame_max_tx_count = wiphy->retry_long; + local->hw.conf.short_frame_max_tx_count = wiphy->retry_short; + local->hw.radiotap_mcs_details = IEEE80211_RADIOTAP_MCS_HAVE_MCS | + IEEE80211_RADIOTAP_MCS_HAVE_GI | + IEEE80211_RADIOTAP_MCS_HAVE_BW; + local->hw.radiotap_vht_details = IEEE80211_RADIOTAP_VHT_KNOWN_GI | + IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH; + local->hw.uapsd_queues = IEEE80211_DEFAULT_UAPSD_QUEUES; + local->hw.uapsd_max_sp_len = IEEE80211_DEFAULT_MAX_SP_LEN; + local->hw.max_mtu = IEEE80211_MAX_DATA_LEN; + local->user_power_level = IEEE80211_UNSET_POWER_LEVEL; + wiphy->ht_capa_mod_mask = &mac80211_ht_capa_mod_mask; + wiphy->vht_capa_mod_mask = &mac80211_vht_capa_mod_mask; + + local->ext_capa[7] = WLAN_EXT_CAPA8_OPMODE_NOTIF; + + wiphy->extended_capabilities = local->ext_capa; + wiphy->extended_capabilities_mask = local->ext_capa; + wiphy->extended_capabilities_len = + ARRAY_SIZE(local->ext_capa); + + INIT_LIST_HEAD(&local->interfaces); + INIT_LIST_HEAD(&local->mon_list); + + __hw_addr_init(&local->mc_list); + + mutex_init(&local->iflist_mtx); + mutex_init(&local->mtx); + + mutex_init(&local->key_mtx); + spin_lock_init(&local->filter_lock); + spin_lock_init(&local->rx_path_lock); + spin_lock_init(&local->queue_stop_reason_lock); + + for (i = 0; i < IEEE80211_NUM_ACS; i++) { + INIT_LIST_HEAD(&local->active_txqs[i]); + spin_lock_init(&local->active_txq_lock[i]); + local->aql_txq_limit_low[i] = IEEE80211_DEFAULT_AQL_TXQ_LIMIT_L; + local->aql_txq_limit_high[i] = + IEEE80211_DEFAULT_AQL_TXQ_LIMIT_H; + atomic_set(&local->aql_ac_pending_airtime[i], 0); + } + + local->airtime_flags = AIRTIME_USE_TX | AIRTIME_USE_RX; + local->aql_threshold = IEEE80211_AQL_THRESHOLD; + atomic_set(&local->aql_total_pending_airtime, 0); + + spin_lock_init(&local->handle_wake_tx_queue_lock); + + INIT_LIST_HEAD(&local->chanctx_list); + mutex_init(&local->chanctx_mtx); + + wiphy_delayed_work_init(&local->scan_work, ieee80211_scan_work); + + INIT_WORK(&local->restart_work, ieee80211_restart_work); + + wiphy_work_init(&local->radar_detected_work, + ieee80211_dfs_radar_detected_work); + + INIT_WORK(&local->reconfig_filter, ieee80211_reconfig_filter); + local->smps_mode = IEEE80211_SMPS_OFF; + + INIT_WORK(&local->dynamic_ps_enable_work, + ieee80211_dynamic_ps_enable_work); + INIT_WORK(&local->dynamic_ps_disable_work, + ieee80211_dynamic_ps_disable_work); + timer_setup(&local->dynamic_ps_timer, ieee80211_dynamic_ps_timer, 0); + + wiphy_work_init(&local->sched_scan_stopped_work, + ieee80211_sched_scan_stopped_work); + + spin_lock_init(&local->ack_status_lock); + idr_init(&local->ack_status_frames); + + for (i = 0; i < IEEE80211_MAX_QUEUES; i++) { + skb_queue_head_init(&local->pending[i]); + atomic_set(&local->agg_queue_stop[i], 0); + } + tasklet_setup(&local->tx_pending_tasklet, ieee80211_tx_pending); + tasklet_setup(&local->wake_txqs_tasklet, ieee80211_wake_txqs); + tasklet_setup(&local->tasklet, ieee80211_tasklet_handler); + + skb_queue_head_init(&local->skb_queue); + skb_queue_head_init(&local->skb_queue_unreliable); + + ieee80211_alloc_led_names(local); + + ieee80211_roc_setup(local); + + local->hw.radiotap_timestamp.units_pos = -1; + local->hw.radiotap_timestamp.accuracy = -1; + + return &local->hw; + err_free: + wiphy_free(wiphy); + return NULL; +} +EXPORT_SYMBOL(ieee80211_alloc_hw_nm); + +static int ieee80211_init_cipher_suites(struct ieee80211_local *local) +{ + bool have_wep = !fips_enabled; /* FIPS does not permit the use of RC4 */ + bool have_mfp = ieee80211_hw_check(&local->hw, MFP_CAPABLE); + int r = 0, w = 0; + u32 *suites; + static const u32 cipher_suites[] = { + /* keep WEP first, it may be removed below */ + WLAN_CIPHER_SUITE_WEP40, + WLAN_CIPHER_SUITE_WEP104, + WLAN_CIPHER_SUITE_TKIP, + WLAN_CIPHER_SUITE_CCMP, + WLAN_CIPHER_SUITE_CCMP_256, + WLAN_CIPHER_SUITE_GCMP, + WLAN_CIPHER_SUITE_GCMP_256, + + /* keep last -- depends on hw flags! */ + WLAN_CIPHER_SUITE_AES_CMAC, + WLAN_CIPHER_SUITE_BIP_CMAC_256, + WLAN_CIPHER_SUITE_BIP_GMAC_128, + WLAN_CIPHER_SUITE_BIP_GMAC_256, + }; + + if (ieee80211_hw_check(&local->hw, SW_CRYPTO_CONTROL) || + local->hw.wiphy->cipher_suites) { + /* If the driver advertises, or doesn't support SW crypto, + * we only need to remove WEP if necessary. + */ + if (have_wep) + return 0; + + /* well if it has _no_ ciphers ... fine */ + if (!local->hw.wiphy->n_cipher_suites) + return 0; + + /* Driver provides cipher suites, but we need to exclude WEP */ + suites = kmemdup(local->hw.wiphy->cipher_suites, + sizeof(u32) * local->hw.wiphy->n_cipher_suites, + GFP_KERNEL); + if (!suites) + return -ENOMEM; + + for (r = 0; r < local->hw.wiphy->n_cipher_suites; r++) { + u32 suite = local->hw.wiphy->cipher_suites[r]; + + if (suite == WLAN_CIPHER_SUITE_WEP40 || + suite == WLAN_CIPHER_SUITE_WEP104) + continue; + suites[w++] = suite; + } + } else { + /* assign the (software supported and perhaps offloaded) + * cipher suites + */ + local->hw.wiphy->cipher_suites = cipher_suites; + local->hw.wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites); + + if (!have_mfp) + local->hw.wiphy->n_cipher_suites -= 4; + + if (!have_wep) { + local->hw.wiphy->cipher_suites += 2; + local->hw.wiphy->n_cipher_suites -= 2; + } + + /* not dynamically allocated, so just return */ + return 0; + } + + local->hw.wiphy->cipher_suites = suites; + local->hw.wiphy->n_cipher_suites = w; + local->wiphy_ciphers_allocated = true; + + return 0; +} + +int ieee80211_register_hw(struct ieee80211_hw *hw) +{ + struct ieee80211_local *local = hw_to_local(hw); + int result, i; + enum nl80211_band band; + int channels, max_bitrates; + bool supp_ht, supp_vht, supp_he, supp_eht; + struct cfg80211_chan_def dflt_chandef = {}; + + if (ieee80211_hw_check(hw, QUEUE_CONTROL) && + (local->hw.offchannel_tx_hw_queue == IEEE80211_INVAL_HW_QUEUE || + local->hw.offchannel_tx_hw_queue >= local->hw.queues)) + return -EINVAL; + + if ((hw->wiphy->features & NL80211_FEATURE_TDLS_CHANNEL_SWITCH) && + (!local->ops->tdls_channel_switch || + !local->ops->tdls_cancel_channel_switch || + !local->ops->tdls_recv_channel_switch)) + return -EOPNOTSUPP; + + if (WARN_ON(ieee80211_hw_check(hw, SUPPORTS_TX_FRAG) && + !local->ops->set_frag_threshold)) + return -EINVAL; + + if (WARN_ON(local->hw.wiphy->interface_modes & + BIT(NL80211_IFTYPE_NAN) && + (!local->ops->start_nan || !local->ops->stop_nan))) + return -EINVAL; + + if (hw->wiphy->flags & WIPHY_FLAG_SUPPORTS_MLO) { + /* + * For drivers capable of doing MLO, assume modern driver + * or firmware facilities, so software doesn't have to do + * as much, e.g. monitoring beacons would be hard if we + * might not even know which link is active at which time. + */ + if (WARN_ON(!local->use_chanctx)) + return -EINVAL; + + if (WARN_ON(!local->ops->link_info_changed)) + return -EINVAL; + + if (WARN_ON(!ieee80211_hw_check(hw, HAS_RATE_CONTROL))) + return -EINVAL; + + if (WARN_ON(!ieee80211_hw_check(hw, AMPDU_AGGREGATION))) + return -EINVAL; + + if (WARN_ON(ieee80211_hw_check(hw, HOST_BROADCAST_PS_BUFFERING))) + return -EINVAL; + + if (WARN_ON(ieee80211_hw_check(hw, SUPPORTS_PS) && + (!ieee80211_hw_check(hw, SUPPORTS_DYNAMIC_PS) || + ieee80211_hw_check(hw, PS_NULLFUNC_STACK)))) + return -EINVAL; + + if (WARN_ON(!ieee80211_hw_check(hw, MFP_CAPABLE))) + return -EINVAL; + + if (WARN_ON(!ieee80211_hw_check(hw, CONNECTION_MONITOR))) + return -EINVAL; + + if (WARN_ON(ieee80211_hw_check(hw, NEED_DTIM_BEFORE_ASSOC))) + return -EINVAL; + + if (WARN_ON(ieee80211_hw_check(hw, TIMING_BEACON_ONLY))) + return -EINVAL; + + if (WARN_ON(!ieee80211_hw_check(hw, AP_LINK_PS))) + return -EINVAL; + + if (WARN_ON(ieee80211_hw_check(hw, DEAUTH_NEED_MGD_TX_PREP))) + return -EINVAL; + } + +#ifdef CONFIG_PM + if (hw->wiphy->wowlan && (!local->ops->suspend || !local->ops->resume)) + return -EINVAL; +#endif + + if (!local->use_chanctx) { + for (i = 0; i < local->hw.wiphy->n_iface_combinations; i++) { + const struct ieee80211_iface_combination *comb; + + comb = &local->hw.wiphy->iface_combinations[i]; + + if (comb->num_different_channels > 1) + return -EINVAL; + } + } else { + /* DFS is not supported with multi-channel combinations yet */ + for (i = 0; i < local->hw.wiphy->n_iface_combinations; i++) { + const struct ieee80211_iface_combination *comb; + + comb = &local->hw.wiphy->iface_combinations[i]; + + if (comb->radar_detect_widths && + comb->num_different_channels > 1) + return -EINVAL; + } + } + + /* Only HW csum features are currently compatible with mac80211 */ + if (WARN_ON(hw->netdev_features & ~MAC80211_SUPPORTED_FEATURES)) + return -EINVAL; + + if (hw->max_report_rates == 0) + hw->max_report_rates = hw->max_rates; + + local->rx_chains = 1; + + /* + * generic code guarantees at least one band, + * set this very early because much code assumes + * that hw.conf.channel is assigned + */ + channels = 0; + max_bitrates = 0; + supp_ht = false; + supp_vht = false; + supp_he = false; + supp_eht = false; + for (band = 0; band < NUM_NL80211_BANDS; band++) { + struct ieee80211_supported_band *sband; + + sband = local->hw.wiphy->bands[band]; + if (!sband) + continue; + + if (!dflt_chandef.chan) { + /* + * Assign the first enabled channel to dflt_chandef + * from the list of channels + */ + for (i = 0; i < sband->n_channels; i++) + if (!(sband->channels[i].flags & + IEEE80211_CHAN_DISABLED)) + break; + /* if none found then use the first anyway */ + if (i == sband->n_channels) + i = 0; + cfg80211_chandef_create(&dflt_chandef, + &sband->channels[i], + NL80211_CHAN_NO_HT); + /* init channel we're on */ + if (!local->use_chanctx && !local->_oper_chandef.chan) { + local->hw.conf.chandef = dflt_chandef; + local->_oper_chandef = dflt_chandef; + } + local->monitor_chandef = dflt_chandef; + } + + channels += sband->n_channels; + + /* + * Due to the way the aggregation code handles this and it + * being an HT capability, we can't really support delayed + * BA in MLO (yet). + */ + if (WARN_ON(sband->ht_cap.ht_supported && + (sband->ht_cap.cap & IEEE80211_HT_CAP_DELAY_BA) && + hw->wiphy->flags & WIPHY_FLAG_SUPPORTS_MLO)) + return -EINVAL; + + if (max_bitrates < sband->n_bitrates) + max_bitrates = sband->n_bitrates; + supp_ht = supp_ht || sband->ht_cap.ht_supported; + supp_vht = supp_vht || sband->vht_cap.vht_supported; + + for (i = 0; i < sband->n_iftype_data; i++) { + const struct ieee80211_sband_iftype_data *iftd; + + iftd = &sband->iftype_data[i]; + + supp_he = supp_he || iftd->he_cap.has_he; + supp_eht = supp_eht || iftd->eht_cap.has_eht; + } + + /* HT, VHT, HE require QoS, thus >= 4 queues */ + if (WARN_ON(local->hw.queues < IEEE80211_NUM_ACS && + (supp_ht || supp_vht || supp_he))) + return -EINVAL; + + /* EHT requires HE support */ + if (WARN_ON(supp_eht && !supp_he)) + return -EINVAL; + + if (!sband->ht_cap.ht_supported) + continue; + + /* TODO: consider VHT for RX chains, hopefully it's the same */ + local->rx_chains = + max(ieee80211_mcs_to_chains(&sband->ht_cap.mcs), + local->rx_chains); + + /* no need to mask, SM_PS_DISABLED has all bits set */ + sband->ht_cap.cap |= WLAN_HT_CAP_SM_PS_DISABLED << + IEEE80211_HT_CAP_SM_PS_SHIFT; + } + + /* if low-level driver supports AP, we also support VLAN. + * drivers advertising SW_CRYPTO_CONTROL should enable AP_VLAN + * based on their support to transmit SW encrypted packets. + */ + if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_AP) && + !ieee80211_hw_check(&local->hw, SW_CRYPTO_CONTROL)) { + hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_AP_VLAN); + hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_AP_VLAN); + } + + /* mac80211 always supports monitor */ + hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR); + hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_MONITOR); + + /* mac80211 doesn't support more than one IBSS interface right now */ + for (i = 0; i < hw->wiphy->n_iface_combinations; i++) { + const struct ieee80211_iface_combination *c; + int j; + + c = &hw->wiphy->iface_combinations[i]; + + for (j = 0; j < c->n_limits; j++) + if ((c->limits[j].types & BIT(NL80211_IFTYPE_ADHOC)) && + c->limits[j].max > 1) + return -EINVAL; + } + + local->int_scan_req = kzalloc(sizeof(*local->int_scan_req) + + sizeof(void *) * channels, GFP_KERNEL); + if (!local->int_scan_req) + return -ENOMEM; + + eth_broadcast_addr(local->int_scan_req->bssid); + + for (band = 0; band < NUM_NL80211_BANDS; band++) { + if (!local->hw.wiphy->bands[band]) + continue; + local->int_scan_req->rates[band] = (u32) -1; + } + +#ifndef CONFIG_MAC80211_MESH + /* mesh depends on Kconfig, but drivers should set it if they want */ + local->hw.wiphy->interface_modes &= ~BIT(NL80211_IFTYPE_MESH_POINT); +#endif + + /* if the underlying driver supports mesh, mac80211 will (at least) + * provide routing of mesh authentication frames to userspace */ + if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_MESH_POINT)) + local->hw.wiphy->flags |= WIPHY_FLAG_MESH_AUTH; + + /* mac80211 supports control port protocol changing */ + local->hw.wiphy->flags |= WIPHY_FLAG_CONTROL_PORT_PROTOCOL; + + if (ieee80211_hw_check(&local->hw, SIGNAL_DBM)) { + local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; + } else if (ieee80211_hw_check(&local->hw, SIGNAL_UNSPEC)) { + local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_UNSPEC; + if (hw->max_signal <= 0) { + result = -EINVAL; + goto fail_workqueue; + } + } + + /* Mac80211 and therefore all drivers using SW crypto only + * are able to handle PTK rekeys and Extended Key ID. + */ + if (!local->ops->set_key) { + wiphy_ext_feature_set(local->hw.wiphy, + NL80211_EXT_FEATURE_CAN_REPLACE_PTK0); + wiphy_ext_feature_set(local->hw.wiphy, + NL80211_EXT_FEATURE_EXT_KEY_ID); + } + + if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_ADHOC)) + wiphy_ext_feature_set(local->hw.wiphy, + NL80211_EXT_FEATURE_DEL_IBSS_STA); + + /* + * Calculate scan IE length -- we need this to alloc + * memory and to subtract from the driver limit. It + * includes the DS Params, (extended) supported rates, and HT + * information -- SSID is the driver's responsibility. + */ + local->scan_ies_len = 4 + max_bitrates /* (ext) supp rates */ + + 3 /* DS Params */; + if (supp_ht) + local->scan_ies_len += 2 + sizeof(struct ieee80211_ht_cap); + + if (supp_vht) + local->scan_ies_len += + 2 + sizeof(struct ieee80211_vht_cap); + + /* + * HE cap element is variable in size - set len to allow max size */ + if (supp_he) { + local->scan_ies_len += + 3 + sizeof(struct ieee80211_he_cap_elem) + + sizeof(struct ieee80211_he_mcs_nss_supp) + + IEEE80211_HE_PPE_THRES_MAX_LEN; + + if (supp_eht) + local->scan_ies_len += + 3 + sizeof(struct ieee80211_eht_cap_elem) + + sizeof(struct ieee80211_eht_mcs_nss_supp) + + IEEE80211_EHT_PPE_THRES_MAX_LEN; + } + + if (!local->ops->hw_scan) { + /* For hw_scan, driver needs to set these up. */ + local->hw.wiphy->max_scan_ssids = 4; + local->hw.wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN; + } + + /* + * If the driver supports any scan IEs, then assume the + * limit includes the IEs mac80211 will add, otherwise + * leave it at zero and let the driver sort it out; we + * still pass our IEs to the driver but userspace will + * not be allowed to in that case. + */ + if (local->hw.wiphy->max_scan_ie_len) + local->hw.wiphy->max_scan_ie_len -= local->scan_ies_len; + + result = ieee80211_init_cipher_suites(local); + if (result < 0) + goto fail_workqueue; + + if (!local->ops->remain_on_channel) + local->hw.wiphy->max_remain_on_channel_duration = 5000; + + /* mac80211 based drivers don't support internal TDLS setup */ + if (local->hw.wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS) + local->hw.wiphy->flags |= WIPHY_FLAG_TDLS_EXTERNAL_SETUP; + + /* mac80211 supports eCSA, if the driver supports STA CSA at all */ + if (ieee80211_hw_check(&local->hw, CHANCTX_STA_CSA)) + local->ext_capa[0] |= WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING; + + /* mac80211 supports multi BSSID, if the driver supports it */ + if (ieee80211_hw_check(&local->hw, SUPPORTS_MULTI_BSSID)) { + local->hw.wiphy->support_mbssid = true; + if (ieee80211_hw_check(&local->hw, + SUPPORTS_ONLY_HE_MULTI_BSSID)) + local->hw.wiphy->support_only_he_mbssid = true; + else + local->ext_capa[2] |= + WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT; + } + + local->hw.wiphy->max_num_csa_counters = IEEE80211_MAX_CNTDWN_COUNTERS_NUM; + + /* + * We use the number of queues for feature tests (QoS, HT) internally + * so restrict them appropriately. + */ + if (hw->queues > IEEE80211_MAX_QUEUES) + hw->queues = IEEE80211_MAX_QUEUES; + + local->workqueue = + alloc_ordered_workqueue("%s", 0, wiphy_name(local->hw.wiphy)); + if (!local->workqueue) { + result = -ENOMEM; + goto fail_workqueue; + } + + /* + * The hardware needs headroom for sending the frame, + * and we need some headroom for passing the frame to monitor + * interfaces, but never both at the same time. + */ + local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom, + IEEE80211_TX_STATUS_HEADROOM); + + /* + * if the driver doesn't specify a max listen interval we + * use 5 which should be a safe default + */ + if (local->hw.max_listen_interval == 0) + local->hw.max_listen_interval = 5; + + local->hw.conf.listen_interval = local->hw.max_listen_interval; + + local->dynamic_ps_forced_timeout = -1; + + if (!local->hw.max_nan_de_entries) + local->hw.max_nan_de_entries = IEEE80211_MAX_NAN_INSTANCE_ID; + + if (!local->hw.weight_multiplier) + local->hw.weight_multiplier = 1; + + ieee80211_wep_init(local); + + local->hw.conf.flags = IEEE80211_CONF_IDLE; + + ieee80211_led_init(local); + + result = ieee80211_txq_setup_flows(local); + if (result) + goto fail_flows; + + rtnl_lock(); + result = ieee80211_init_rate_ctrl_alg(local, + hw->rate_control_algorithm); + rtnl_unlock(); + if (result < 0) { + wiphy_debug(local->hw.wiphy, + "Failed to initialize rate control algorithm\n"); + goto fail_rate; + } + + if (local->rate_ctrl) { + clear_bit(IEEE80211_HW_SUPPORTS_VHT_EXT_NSS_BW, hw->flags); + if (local->rate_ctrl->ops->capa & RATE_CTRL_CAPA_VHT_EXT_NSS_BW) + ieee80211_hw_set(hw, SUPPORTS_VHT_EXT_NSS_BW); + } + + /* + * If the VHT capabilities don't have IEEE80211_VHT_EXT_NSS_BW_CAPABLE, + * or have it when we don't, copy the sband structure and set/clear it. + * This is necessary because rate scaling algorithms could be switched + * and have different support values. + * Print a message so that in the common case the reallocation can be + * avoided. + */ + BUILD_BUG_ON(NUM_NL80211_BANDS > 8 * sizeof(local->sband_allocated)); + for (band = 0; band < NUM_NL80211_BANDS; band++) { + struct ieee80211_supported_band *sband; + bool local_cap, ie_cap; + + local_cap = ieee80211_hw_check(hw, SUPPORTS_VHT_EXT_NSS_BW); + + sband = local->hw.wiphy->bands[band]; + if (!sband || !sband->vht_cap.vht_supported) + continue; + + ie_cap = !!(sband->vht_cap.vht_mcs.tx_highest & + cpu_to_le16(IEEE80211_VHT_EXT_NSS_BW_CAPABLE)); + + if (local_cap == ie_cap) + continue; + + sband = kmemdup(sband, sizeof(*sband), GFP_KERNEL); + if (!sband) { + result = -ENOMEM; + goto fail_rate; + } + + wiphy_dbg(hw->wiphy, "copying sband (band %d) due to VHT EXT NSS BW flag\n", + band); + + sband->vht_cap.vht_mcs.tx_highest ^= + cpu_to_le16(IEEE80211_VHT_EXT_NSS_BW_CAPABLE); + + local->hw.wiphy->bands[band] = sband; + local->sband_allocated |= BIT(band); + } + + result = wiphy_register(local->hw.wiphy); + if (result < 0) + goto fail_wiphy_register; + + debugfs_hw_add(local); + rate_control_add_debugfs(local); + + rtnl_lock(); + wiphy_lock(hw->wiphy); + + /* add one default STA interface if supported */ + if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_STATION) && + !ieee80211_hw_check(hw, NO_AUTO_VIF)) { + struct vif_params params = {0}; + + result = ieee80211_if_add(local, "wlan%d", NET_NAME_ENUM, NULL, + NL80211_IFTYPE_STATION, ¶ms); + if (result) + wiphy_warn(local->hw.wiphy, + "Failed to add default virtual iface\n"); + } + + wiphy_unlock(hw->wiphy); + rtnl_unlock(); + +#ifdef CONFIG_INET + local->ifa_notifier.notifier_call = ieee80211_ifa_changed; + result = register_inetaddr_notifier(&local->ifa_notifier); + if (result) + goto fail_ifa; +#endif + +#if IS_ENABLED(CONFIG_IPV6) + local->ifa6_notifier.notifier_call = ieee80211_ifa6_changed; + result = register_inet6addr_notifier(&local->ifa6_notifier); + if (result) + goto fail_ifa6; +#endif + + return 0; + +#if IS_ENABLED(CONFIG_IPV6) + fail_ifa6: +#ifdef CONFIG_INET + unregister_inetaddr_notifier(&local->ifa_notifier); +#endif +#endif +#if defined(CONFIG_INET) || defined(CONFIG_IPV6) + fail_ifa: +#endif + wiphy_unregister(local->hw.wiphy); + fail_wiphy_register: + rtnl_lock(); + rate_control_deinitialize(local); + ieee80211_remove_interfaces(local); + rtnl_unlock(); + fail_rate: + fail_flows: + ieee80211_led_exit(local); + destroy_workqueue(local->workqueue); + fail_workqueue: + if (local->wiphy_ciphers_allocated) { + kfree(local->hw.wiphy->cipher_suites); + local->wiphy_ciphers_allocated = false; + } + kfree(local->int_scan_req); + return result; +} +EXPORT_SYMBOL(ieee80211_register_hw); + +void ieee80211_unregister_hw(struct ieee80211_hw *hw) +{ + struct ieee80211_local *local = hw_to_local(hw); + + tasklet_kill(&local->tx_pending_tasklet); + tasklet_kill(&local->tasklet); + +#ifdef CONFIG_INET + unregister_inetaddr_notifier(&local->ifa_notifier); +#endif +#if IS_ENABLED(CONFIG_IPV6) + unregister_inet6addr_notifier(&local->ifa6_notifier); +#endif + + rtnl_lock(); + + /* + * At this point, interface list manipulations are fine + * because the driver cannot be handing us frames any + * more and the tasklet is killed. + */ + ieee80211_remove_interfaces(local); + + wiphy_lock(local->hw.wiphy); + wiphy_delayed_work_cancel(local->hw.wiphy, &local->roc_work); + wiphy_work_cancel(local->hw.wiphy, &local->sched_scan_stopped_work); + wiphy_work_cancel(local->hw.wiphy, &local->radar_detected_work); + wiphy_unlock(local->hw.wiphy); + rtnl_unlock(); + + cancel_work_sync(&local->restart_work); + cancel_work_sync(&local->reconfig_filter); + + ieee80211_clear_tx_pending(local); + rate_control_deinitialize(local); + + if (skb_queue_len(&local->skb_queue) || + skb_queue_len(&local->skb_queue_unreliable)) + wiphy_warn(local->hw.wiphy, "skb_queue not empty\n"); + skb_queue_purge(&local->skb_queue); + skb_queue_purge(&local->skb_queue_unreliable); + + wiphy_unregister(local->hw.wiphy); + destroy_workqueue(local->workqueue); + ieee80211_led_exit(local); + kfree(local->int_scan_req); +} +EXPORT_SYMBOL(ieee80211_unregister_hw); + +static int ieee80211_free_ack_frame(int id, void *p, void *data) +{ + WARN_ONCE(1, "Have pending ack frames!\n"); + kfree_skb(p); + return 0; +} + +void ieee80211_free_hw(struct ieee80211_hw *hw) +{ + struct ieee80211_local *local = hw_to_local(hw); + enum nl80211_band band; + + mutex_destroy(&local->iflist_mtx); + mutex_destroy(&local->mtx); + + if (local->wiphy_ciphers_allocated) { + kfree(local->hw.wiphy->cipher_suites); + local->wiphy_ciphers_allocated = false; + } + + idr_for_each(&local->ack_status_frames, + ieee80211_free_ack_frame, NULL); + idr_destroy(&local->ack_status_frames); + + sta_info_stop(local); + + ieee80211_free_led_names(local); + + for (band = 0; band < NUM_NL80211_BANDS; band++) { + if (!(local->sband_allocated & BIT(band))) + continue; + kfree(local->hw.wiphy->bands[band]); + } + + wiphy_free(local->hw.wiphy); +} +EXPORT_SYMBOL(ieee80211_free_hw); + +static const char * const drop_reasons_monitor[] = { +#define V(x) #x, + [0] = "RX_DROP_MONITOR", + MAC80211_DROP_REASONS_MONITOR(V) +}; + +static struct drop_reason_list drop_reason_list_monitor = { + .reasons = drop_reasons_monitor, + .n_reasons = ARRAY_SIZE(drop_reasons_monitor), +}; + +static const char * const drop_reasons_unusable[] = { + [0] = "RX_DROP_UNUSABLE", + MAC80211_DROP_REASONS_UNUSABLE(V) +#undef V +}; + +static struct drop_reason_list drop_reason_list_unusable = { + .reasons = drop_reasons_unusable, + .n_reasons = ARRAY_SIZE(drop_reasons_unusable), +}; + +static int __init ieee80211_init(void) +{ + struct sk_buff *skb; + int ret; + + BUILD_BUG_ON(sizeof(struct ieee80211_tx_info) > sizeof(skb->cb)); + BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, driver_data) + + IEEE80211_TX_INFO_DRIVER_DATA_SIZE > sizeof(skb->cb)); + + ret = rc80211_minstrel_init(); + if (ret) + return ret; + + ret = ieee80211_iface_init(); + if (ret) + goto err_netdev; + + drop_reasons_register_subsys(SKB_DROP_REASON_SUBSYS_MAC80211_MONITOR, + &drop_reason_list_monitor); + drop_reasons_register_subsys(SKB_DROP_REASON_SUBSYS_MAC80211_UNUSABLE, + &drop_reason_list_unusable); + + return 0; + err_netdev: + rc80211_minstrel_exit(); + + return ret; +} + +static void __exit ieee80211_exit(void) +{ + rc80211_minstrel_exit(); + + ieee80211s_stop(); + + ieee80211_iface_exit(); + + drop_reasons_unregister_subsys(SKB_DROP_REASON_SUBSYS_MAC80211_MONITOR); + drop_reasons_unregister_subsys(SKB_DROP_REASON_SUBSYS_MAC80211_UNUSABLE); + + rcu_barrier(); +} + + +subsys_initcall(ieee80211_init); +module_exit(ieee80211_exit); + +MODULE_DESCRIPTION("IEEE 802.11 subsystem"); +MODULE_LICENSE("GPL"); |