diff options
Diffstat (limited to 'net/mac80211/mlme.c')
| -rw-r--r-- | net/mac80211/mlme.c | 3072 |
1 files changed, 1755 insertions, 1317 deletions
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index df26672fb3..497677e3d8 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -46,6 +46,8 @@ #define IEEE80211_ADV_TTLM_SAFETY_BUFFER_MS msecs_to_jiffies(100) #define IEEE80211_ADV_TTLM_ST_UNDERFLOW 0xff00 +#define IEEE80211_NEG_TTLM_REQ_TIMEOUT (HZ / 5) + static int max_nullfunc_tries = 2; module_param(max_nullfunc_tries, int, 0644); MODULE_PARM_DESC(max_nullfunc_tries, @@ -92,84 +94,6 @@ MODULE_PARM_DESC(probe_wait_ms, #define IEEE80211_SIGNAL_AVE_MIN_COUNT 4 /* - * Extract from the given disabled subchannel bitmap (raw format - * from the EHT Operation Element) the bits for the subchannel - * we're using right now. - */ -static u16 -ieee80211_extract_dis_subch_bmap(const struct ieee80211_eht_operation *eht_oper, - struct cfg80211_chan_def *chandef, u16 bitmap) -{ - struct ieee80211_eht_operation_info *info = (void *)eht_oper->optional; - struct cfg80211_chan_def ap_chandef = *chandef; - u32 ap_center_freq, local_center_freq; - u32 ap_bw, local_bw; - int ap_start_freq, local_start_freq; - u16 shift, mask; - - if (!(eht_oper->params & IEEE80211_EHT_OPER_INFO_PRESENT) || - !(eht_oper->params & - IEEE80211_EHT_OPER_DISABLED_SUBCHANNEL_BITMAP_PRESENT)) - return 0; - - /* set 160/320 supported to get the full AP definition */ - ieee80211_chandef_eht_oper((const void *)eht_oper->optional, - true, true, &ap_chandef); - ap_center_freq = ap_chandef.center_freq1; - ap_bw = 20 * BIT(u8_get_bits(info->control, - IEEE80211_EHT_OPER_CHAN_WIDTH)); - ap_start_freq = ap_center_freq - ap_bw / 2; - local_center_freq = chandef->center_freq1; - local_bw = 20 * BIT(ieee80211_chan_width_to_rx_bw(chandef->width)); - local_start_freq = local_center_freq - local_bw / 2; - shift = (local_start_freq - ap_start_freq) / 20; - mask = BIT(local_bw / 20) - 1; - - return (bitmap >> shift) & mask; -} - -/* - * Handle the puncturing bitmap, possibly downgrading bandwidth to get a - * valid bitmap. - */ -static void -ieee80211_handle_puncturing_bitmap(struct ieee80211_link_data *link, - const struct ieee80211_eht_operation *eht_oper, - u16 bitmap, u64 *changed) -{ - struct cfg80211_chan_def *chandef = &link->conf->chandef; - struct ieee80211_local *local = link->sdata->local; - u16 extracted; - u64 _changed = 0; - - if (!changed) - changed = &_changed; - - while (chandef->width > NL80211_CHAN_WIDTH_40) { - extracted = - ieee80211_extract_dis_subch_bmap(eht_oper, chandef, - bitmap); - - if (cfg80211_valid_disable_subchannel_bitmap(&bitmap, - chandef) && - !(bitmap && ieee80211_hw_check(&local->hw, - DISALLOW_PUNCTURING))) - break; - link->u.mgd.conn_flags |= - ieee80211_chandef_downgrade(chandef); - *changed |= BSS_CHANGED_BANDWIDTH; - } - - if (chandef->width <= NL80211_CHAN_WIDTH_40) - extracted = 0; - - if (link->conf->eht_puncturing != extracted) { - link->conf->eht_puncturing = extracted; - *changed |= BSS_CHANGED_EHT_PUNCTURING; - } -} - -/* * We can have multiple work items (and connection probing) * scheduling this timer, but we need to take care to only * reschedule it when it should fire _earlier_ than it was @@ -223,77 +147,84 @@ static int ecw2cw(int ecw) return (1 << ecw) - 1; } -static ieee80211_conn_flags_t -ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, - struct ieee80211_link_data *link, - ieee80211_conn_flags_t conn_flags, - struct ieee80211_supported_band *sband, - struct ieee80211_channel *channel, - u32 vht_cap_info, - const struct ieee80211_ht_operation *ht_oper, - const struct ieee80211_vht_operation *vht_oper, - const struct ieee80211_he_operation *he_oper, - const struct ieee80211_eht_operation *eht_oper, - const struct ieee80211_s1g_oper_ie *s1g_oper, - struct cfg80211_chan_def *chandef, bool tracking) +static enum ieee80211_conn_mode +ieee80211_determine_ap_chan(struct ieee80211_sub_if_data *sdata, + struct ieee80211_channel *channel, + u32 vht_cap_info, + const struct ieee802_11_elems *elems, + bool ignore_ht_channel_mismatch, + const struct ieee80211_conn_settings *conn, + struct cfg80211_chan_def *chandef) { + const struct ieee80211_ht_operation *ht_oper = elems->ht_operation; + const struct ieee80211_vht_operation *vht_oper = elems->vht_operation; + const struct ieee80211_he_operation *he_oper = elems->he_operation; + const struct ieee80211_eht_operation *eht_oper = elems->eht_operation; + struct ieee80211_supported_band *sband = + sdata->local->hw.wiphy->bands[channel->band]; struct cfg80211_chan_def vht_chandef; - struct ieee80211_sta_ht_cap sta_ht_cap; - ieee80211_conn_flags_t ret; + bool no_vht = false; u32 ht_cfreq; - memset(chandef, 0, sizeof(struct cfg80211_chan_def)); - chandef->chan = channel; - chandef->width = NL80211_CHAN_WIDTH_20_NOHT; - chandef->center_freq1 = channel->center_freq; - chandef->freq1_offset = channel->freq_offset; + *chandef = (struct cfg80211_chan_def) { + .chan = channel, + .width = NL80211_CHAN_WIDTH_20_NOHT, + .center_freq1 = channel->center_freq, + .freq1_offset = channel->freq_offset, + }; - if (channel->band == NL80211_BAND_6GHZ) { - if (!ieee80211_chandef_he_6ghz_oper(sdata, he_oper, eht_oper, - chandef)) { - mlme_dbg(sdata, - "bad 6 GHz operation, disabling HT/VHT/HE/EHT\n"); - ret = IEEE80211_CONN_DISABLE_HT | - IEEE80211_CONN_DISABLE_VHT | - IEEE80211_CONN_DISABLE_HE | - IEEE80211_CONN_DISABLE_EHT; - } else { - ret = 0; - } - vht_chandef = *chandef; - goto out; - } else if (sband->band == NL80211_BAND_S1GHZ) { - if (!ieee80211_chandef_s1g_oper(s1g_oper, chandef)) { + /* get special S1G case out of the way */ + if (sband->band == NL80211_BAND_S1GHZ) { + if (!ieee80211_chandef_s1g_oper(elems->s1g_oper, chandef)) { sdata_info(sdata, "Missing S1G Operation Element? Trying operating == primary\n"); chandef->width = ieee80211_s1g_channel_width(channel); } - ret = IEEE80211_CONN_DISABLE_HT | IEEE80211_CONN_DISABLE_40MHZ | - IEEE80211_CONN_DISABLE_VHT | - IEEE80211_CONN_DISABLE_80P80MHZ | - IEEE80211_CONN_DISABLE_160MHZ; - goto out; + return IEEE80211_CONN_MODE_S1G; } - memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap)); - ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap); + /* get special 6 GHz case out of the way */ + if (sband->band == NL80211_BAND_6GHZ) { + enum ieee80211_conn_mode mode = IEEE80211_CONN_MODE_EHT; - if (!ht_oper || !sta_ht_cap.ht_supported) { - mlme_dbg(sdata, "HT operation missing / HT not supported\n"); - ret = IEEE80211_CONN_DISABLE_HT | - IEEE80211_CONN_DISABLE_VHT | - IEEE80211_CONN_DISABLE_HE | - IEEE80211_CONN_DISABLE_EHT; - goto out; + /* this is an error */ + if (conn->mode < IEEE80211_CONN_MODE_HE) + return IEEE80211_CONN_MODE_LEGACY; + + if (!elems->he_6ghz_capa || !elems->he_cap) { + sdata_info(sdata, + "HE 6 GHz AP is missing HE/HE 6 GHz band capability\n"); + return IEEE80211_CONN_MODE_LEGACY; + } + + if (!eht_oper || !elems->eht_cap) { + eht_oper = NULL; + mode = IEEE80211_CONN_MODE_HE; + } + + if (!ieee80211_chandef_he_6ghz_oper(sdata->local, he_oper, + eht_oper, chandef)) { + sdata_info(sdata, "bad HE/EHT 6 GHz operation\n"); + return IEEE80211_CONN_MODE_LEGACY; + } + + return mode; } + /* now we have the progression HT, VHT, ... */ + if (conn->mode < IEEE80211_CONN_MODE_HT) + return IEEE80211_CONN_MODE_LEGACY; + + if (!ht_oper || !elems->ht_cap_elem) + return IEEE80211_CONN_MODE_LEGACY; + chandef->width = NL80211_CHAN_WIDTH_20; ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan, channel->band); /* check that channel matches the right operating channel */ - if (!tracking && channel->center_freq != ht_cfreq) { + if (!ignore_ht_channel_mismatch && channel->center_freq != ht_cfreq) { /* * It's possible that some APs are confused here; * Netgear WNDR3700 sometimes reports 4 higher than @@ -305,36 +236,22 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n", channel->center_freq, ht_cfreq, ht_oper->primary_chan, channel->band); - ret = IEEE80211_CONN_DISABLE_HT | - IEEE80211_CONN_DISABLE_VHT | - IEEE80211_CONN_DISABLE_HE | - IEEE80211_CONN_DISABLE_EHT; - goto out; + return IEEE80211_CONN_MODE_LEGACY; } - /* check 40 MHz support, if we have it */ - if (sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) { - ieee80211_chandef_ht_oper(ht_oper, chandef); - } else { - mlme_dbg(sdata, "40 MHz not supported\n"); - /* 40 MHz (and 80 MHz) must be supported for VHT */ - ret = IEEE80211_CONN_DISABLE_VHT; - /* also mark 40 MHz disabled */ - ret |= IEEE80211_CONN_DISABLE_40MHZ; - goto out; - } + ieee80211_chandef_ht_oper(ht_oper, chandef); - if (!vht_oper || !sband->vht_cap.vht_supported) { - mlme_dbg(sdata, "VHT operation missing / VHT not supported\n"); - ret = IEEE80211_CONN_DISABLE_VHT; - goto out; - } + if (conn->mode < IEEE80211_CONN_MODE_VHT) + return IEEE80211_CONN_MODE_HT; vht_chandef = *chandef; - if (!(conn_flags & IEEE80211_CONN_DISABLE_HE) && - he_oper && - (le32_to_cpu(he_oper->he_oper_params) & - IEEE80211_HE_OPERATION_VHT_OPER_INFO)) { + + /* + * having he_cap/he_oper parsed out implies we're at + * least operating as HE STA + */ + if (elems->he_cap && he_oper && + he_oper->he_oper_params & cpu_to_le32(IEEE80211_HE_OPERATION_VHT_OPER_INFO)) { struct ieee80211_vht_operation he_oper_vht_cap; /* @@ -347,253 +264,621 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, if (!ieee80211_chandef_vht_oper(&sdata->local->hw, vht_cap_info, &he_oper_vht_cap, ht_oper, &vht_chandef)) { - if (!(conn_flags & IEEE80211_CONN_DISABLE_HE)) - sdata_info(sdata, - "HE AP VHT information is invalid, disabling HE\n"); - ret = IEEE80211_CONN_DISABLE_HE | IEEE80211_CONN_DISABLE_EHT; - goto out; + sdata_info(sdata, + "HE AP VHT information is invalid, disabling HE\n"); + /* this will cause us to re-parse as VHT STA */ + return IEEE80211_CONN_MODE_VHT; } + } else if (!vht_oper || !elems->vht_cap_elem) { + if (sband->band == NL80211_BAND_5GHZ) { + sdata_info(sdata, + "VHT information is missing, disabling VHT\n"); + return IEEE80211_CONN_MODE_HT; + } + no_vht = true; + } else if (sband->band == NL80211_BAND_2GHZ) { + no_vht = true; } else if (!ieee80211_chandef_vht_oper(&sdata->local->hw, vht_cap_info, vht_oper, ht_oper, &vht_chandef)) { - if (!(conn_flags & IEEE80211_CONN_DISABLE_VHT)) - sdata_info(sdata, - "AP VHT information is invalid, disabling VHT\n"); - ret = IEEE80211_CONN_DISABLE_VHT; - goto out; + sdata_info(sdata, + "AP VHT information is invalid, disabling VHT\n"); + return IEEE80211_CONN_MODE_HT; } - if (!cfg80211_chandef_valid(&vht_chandef)) { - if (!(conn_flags & IEEE80211_CONN_DISABLE_VHT)) - sdata_info(sdata, - "AP VHT information is invalid, disabling VHT\n"); - ret = IEEE80211_CONN_DISABLE_VHT; - goto out; + if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) { + sdata_info(sdata, + "AP VHT information doesn't match HT, disabling VHT\n"); + return IEEE80211_CONN_MODE_HT; } - if (cfg80211_chandef_identical(chandef, &vht_chandef)) { - ret = 0; - goto out; - } + *chandef = vht_chandef; - if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) { - if (!(conn_flags & IEEE80211_CONN_DISABLE_VHT)) - sdata_info(sdata, - "AP VHT information doesn't match HT, disabling VHT\n"); - ret = IEEE80211_CONN_DISABLE_VHT; - goto out; + /* stick to current max mode if we or the AP don't have HE */ + if (conn->mode < IEEE80211_CONN_MODE_HE || + !elems->he_operation || !elems->he_cap) { + if (no_vht) + return IEEE80211_CONN_MODE_HT; + return IEEE80211_CONN_MODE_VHT; } - *chandef = vht_chandef; + /* stick to HE if we or the AP don't have EHT */ + if (conn->mode < IEEE80211_CONN_MODE_EHT || + !eht_oper || !elems->eht_cap) + return IEEE80211_CONN_MODE_HE; /* * handle the case that the EHT operation indicates that it holds EHT * operation information (in case that the channel width differs from * the channel width reported in HT/VHT/HE). */ - if (eht_oper && (eht_oper->params & IEEE80211_EHT_OPER_INFO_PRESENT)) { + if (eht_oper->params & IEEE80211_EHT_OPER_INFO_PRESENT) { struct cfg80211_chan_def eht_chandef = *chandef; ieee80211_chandef_eht_oper((const void *)eht_oper->optional, - eht_chandef.width == - NL80211_CHAN_WIDTH_160, - false, &eht_chandef); + &eht_chandef); + + eht_chandef.punctured = + ieee80211_eht_oper_dis_subchan_bitmap(eht_oper); if (!cfg80211_chandef_valid(&eht_chandef)) { - if (!(conn_flags & IEEE80211_CONN_DISABLE_EHT)) - sdata_info(sdata, - "AP EHT information is invalid, disabling EHT\n"); - ret = IEEE80211_CONN_DISABLE_EHT; - goto out; + sdata_info(sdata, + "AP EHT information is invalid, disabling EHT\n"); + return IEEE80211_CONN_MODE_HE; } if (!cfg80211_chandef_compatible(chandef, &eht_chandef)) { - if (!(conn_flags & IEEE80211_CONN_DISABLE_EHT)) - sdata_info(sdata, - "AP EHT information is incompatible, disabling EHT\n"); - ret = IEEE80211_CONN_DISABLE_EHT; - goto out; + sdata_info(sdata, + "AP EHT information doesn't match HT/VHT/HE, disabling EHT\n"); + return IEEE80211_CONN_MODE_HE; } *chandef = eht_chandef; } - ret = 0; + return IEEE80211_CONN_MODE_EHT; +} + +static bool +ieee80211_verify_peer_he_mcs_support(struct ieee80211_sub_if_data *sdata, + const struct ieee80211_he_cap_elem *he_cap, + const struct ieee80211_he_operation *he_op) +{ + struct ieee80211_he_mcs_nss_supp *he_mcs_nss_supp; + u16 mcs_80_map_tx, mcs_80_map_rx; + u16 ap_min_req_set; + int nss; + + if (!he_cap) + return false; + + /* mcs_nss is right after he_cap info */ + he_mcs_nss_supp = (void *)(he_cap + 1); + + mcs_80_map_tx = le16_to_cpu(he_mcs_nss_supp->tx_mcs_80); + mcs_80_map_rx = le16_to_cpu(he_mcs_nss_supp->rx_mcs_80); + + /* P802.11-REVme/D0.3 + * 27.1.1 Introduction to the HE PHY + * ... + * An HE STA shall support the following features: + * ... + * Single spatial stream HE-MCSs 0 to 7 (transmit and receive) in all + * supported channel widths for HE SU PPDUs + */ + if ((mcs_80_map_tx & 0x3) == IEEE80211_HE_MCS_NOT_SUPPORTED || + (mcs_80_map_rx & 0x3) == IEEE80211_HE_MCS_NOT_SUPPORTED) { + sdata_info(sdata, + "Missing mandatory rates for 1 Nss, rx 0x%x, tx 0x%x, disable HE\n", + mcs_80_map_tx, mcs_80_map_rx); + return false; + } + + if (!he_op) + return true; + + ap_min_req_set = le16_to_cpu(he_op->he_mcs_nss_set); -out: /* - * When tracking the current AP, don't do any further checks if the - * new chandef is identical to the one we're currently using for the - * connection. This keeps us from playing ping-pong with regulatory, - * without it the following can happen (for example): - * - connect to an AP with 80 MHz, world regdom allows 80 MHz - * - AP advertises regdom US - * - CRDA loads regdom US with 80 MHz prohibited (old database) - * - the code below detects an unsupported channel, downgrades, and - * we disconnect from the AP in the caller - * - disconnect causes CRDA to reload world regdomain and the game - * starts anew. - * (see https://bugzilla.kernel.org/show_bug.cgi?id=70881) + * Apparently iPhone 13 (at least iOS version 15.3.1) sets this to all + * zeroes, which is nonsense, and completely inconsistent with itself + * (it doesn't have 8 streams). Accept the settings in this case anyway. + */ + if (!ap_min_req_set) + return true; + + /* make sure the AP is consistent with itself * - * It seems possible that there are still scenarios with CSA or real - * bandwidth changes where a this could happen, but those cases are - * less common and wouldn't completely prevent using the AP. + * P802.11-REVme/D0.3 + * 26.17.1 Basic HE BSS operation + * + * A STA that is operating in an HE BSS shall be able to receive and + * transmit at each of the <HE-MCS, NSS> tuple values indicated by the + * Basic HE-MCS And NSS Set field of the HE Operation parameter of the + * MLME-START.request primitive and shall be able to receive at each of + * the <HE-MCS, NSS> tuple values indicated by the Supported HE-MCS and + * NSS Set field in the HE Capabilities parameter of the MLMESTART.request + * primitive */ - if (tracking && - cfg80211_chandef_identical(chandef, &link->conf->chandef)) - return ret; + for (nss = 8; nss > 0; nss--) { + u8 ap_op_val = (ap_min_req_set >> (2 * (nss - 1))) & 3; + u8 ap_rx_val; + u8 ap_tx_val; + + if (ap_op_val == IEEE80211_HE_MCS_NOT_SUPPORTED) + continue; + + ap_rx_val = (mcs_80_map_rx >> (2 * (nss - 1))) & 3; + ap_tx_val = (mcs_80_map_tx >> (2 * (nss - 1))) & 3; + + if (ap_rx_val == IEEE80211_HE_MCS_NOT_SUPPORTED || + ap_tx_val == IEEE80211_HE_MCS_NOT_SUPPORTED || + ap_rx_val < ap_op_val || ap_tx_val < ap_op_val) { + sdata_info(sdata, + "Invalid rates for %d Nss, rx %d, tx %d oper %d, disable HE\n", + nss, ap_rx_val, ap_rx_val, ap_op_val); + return false; + } + } + + return true; +} - /* don't print the message below for VHT mismatch if VHT is disabled */ - if (ret & IEEE80211_CONN_DISABLE_VHT) - vht_chandef = *chandef; +static bool +ieee80211_verify_sta_he_mcs_support(struct ieee80211_sub_if_data *sdata, + struct ieee80211_supported_band *sband, + const struct ieee80211_he_operation *he_op) +{ + const struct ieee80211_sta_he_cap *sta_he_cap = + ieee80211_get_he_iftype_cap_vif(sband, &sdata->vif); + u16 ap_min_req_set; + int i; + + if (!sta_he_cap || !he_op) + return false; + + ap_min_req_set = le16_to_cpu(he_op->he_mcs_nss_set); /* - * Ignore the DISABLED flag when we're already connected and only - * tracking the APs beacon for bandwidth changes - otherwise we - * might get disconnected here if we connect to an AP, update our - * regulatory information based on the AP's country IE and the - * information we have is wrong/outdated and disables the channel - * that we're actually using for the connection to the AP. + * Apparently iPhone 13 (at least iOS version 15.3.1) sets this to all + * zeroes, which is nonsense, and completely inconsistent with itself + * (it doesn't have 8 streams). Accept the settings in this case anyway. */ - while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef, - tracking ? 0 : - IEEE80211_CHAN_DISABLED)) { - if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) { - ret = IEEE80211_CONN_DISABLE_HT | - IEEE80211_CONN_DISABLE_VHT | - IEEE80211_CONN_DISABLE_HE | - IEEE80211_CONN_DISABLE_EHT; - break; + if (!ap_min_req_set) + return true; + + /* Need to go over for 80MHz, 160MHz and for 80+80 */ + for (i = 0; i < 3; i++) { + const struct ieee80211_he_mcs_nss_supp *sta_mcs_nss_supp = + &sta_he_cap->he_mcs_nss_supp; + u16 sta_mcs_map_rx = + le16_to_cpu(((__le16 *)sta_mcs_nss_supp)[2 * i]); + u16 sta_mcs_map_tx = + le16_to_cpu(((__le16 *)sta_mcs_nss_supp)[2 * i + 1]); + u8 nss; + bool verified = true; + + /* + * For each band there is a maximum of 8 spatial streams + * possible. Each of the sta_mcs_map_* is a 16-bit struct built + * of 2 bits per NSS (1-8), with the values defined in enum + * ieee80211_he_mcs_support. Need to make sure STA TX and RX + * capabilities aren't less than the AP's minimum requirements + * for this HE BSS per SS. + * It is enough to find one such band that meets the reqs. + */ + for (nss = 8; nss > 0; nss--) { + u8 sta_rx_val = (sta_mcs_map_rx >> (2 * (nss - 1))) & 3; + u8 sta_tx_val = (sta_mcs_map_tx >> (2 * (nss - 1))) & 3; + u8 ap_val = (ap_min_req_set >> (2 * (nss - 1))) & 3; + + if (ap_val == IEEE80211_HE_MCS_NOT_SUPPORTED) + continue; + + /* + * Make sure the HE AP doesn't require MCSs that aren't + * supported by the client as required by spec + * + * P802.11-REVme/D0.3 + * 26.17.1 Basic HE BSS operation + * + * An HE STA shall not attempt to join * (MLME-JOIN.request primitive) + * a BSS, unless it supports (i.e., is able to both transmit and + * receive using) all of the <HE-MCS, NSS> tuples in the basic + * HE-MCS and NSS set. + */ + if (sta_rx_val == IEEE80211_HE_MCS_NOT_SUPPORTED || + sta_tx_val == IEEE80211_HE_MCS_NOT_SUPPORTED || + (ap_val > sta_rx_val) || (ap_val > sta_tx_val)) { + verified = false; + break; + } + } + + if (verified) + return true; + } + + /* If here, STA doesn't meet AP's HE min requirements */ + return false; +} + +static u8 +ieee80211_get_eht_cap_mcs_nss(const struct ieee80211_sta_he_cap *sta_he_cap, + const struct ieee80211_sta_eht_cap *sta_eht_cap, + unsigned int idx, int bw) +{ + u8 he_phy_cap0 = sta_he_cap->he_cap_elem.phy_cap_info[0]; + u8 eht_phy_cap0 = sta_eht_cap->eht_cap_elem.phy_cap_info[0]; + + /* handle us being a 20 MHz-only EHT STA - with four values + * for MCS 0-7, 8-9, 10-11, 12-13. + */ + if (!(he_phy_cap0 & IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_MASK_ALL)) + return sta_eht_cap->eht_mcs_nss_supp.only_20mhz.rx_tx_max_nss[idx]; + + /* the others have MCS 0-9 together, rather than separately from 0-7 */ + if (idx > 0) + idx--; + + switch (bw) { + case 0: + return sta_eht_cap->eht_mcs_nss_supp.bw._80.rx_tx_max_nss[idx]; + case 1: + if (!(he_phy_cap0 & + (IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G | + IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G))) + return 0xff; /* pass check */ + return sta_eht_cap->eht_mcs_nss_supp.bw._160.rx_tx_max_nss[idx]; + case 2: + if (!(eht_phy_cap0 & IEEE80211_EHT_PHY_CAP0_320MHZ_IN_6GHZ)) + return 0xff; /* pass check */ + return sta_eht_cap->eht_mcs_nss_supp.bw._320.rx_tx_max_nss[idx]; + } + + WARN_ON(1); + return 0; +} + +static bool +ieee80211_verify_sta_eht_mcs_support(struct ieee80211_sub_if_data *sdata, + struct ieee80211_supported_band *sband, + const struct ieee80211_eht_operation *eht_op) +{ + const struct ieee80211_sta_he_cap *sta_he_cap = + ieee80211_get_he_iftype_cap_vif(sband, &sdata->vif); + const struct ieee80211_sta_eht_cap *sta_eht_cap = + ieee80211_get_eht_iftype_cap_vif(sband, &sdata->vif); + const struct ieee80211_eht_mcs_nss_supp_20mhz_only *req; + unsigned int i; + + if (!sta_he_cap || !sta_eht_cap || !eht_op) + return false; + + req = &eht_op->basic_mcs_nss; + + for (i = 0; i < ARRAY_SIZE(req->rx_tx_max_nss); i++) { + u8 req_rx_nss, req_tx_nss; + unsigned int bw; + + req_rx_nss = u8_get_bits(req->rx_tx_max_nss[i], + IEEE80211_EHT_MCS_NSS_RX); + req_tx_nss = u8_get_bits(req->rx_tx_max_nss[i], + IEEE80211_EHT_MCS_NSS_TX); + + for (bw = 0; bw < 3; bw++) { + u8 have, have_rx_nss, have_tx_nss; + + have = ieee80211_get_eht_cap_mcs_nss(sta_he_cap, + sta_eht_cap, + i, bw); + have_rx_nss = u8_get_bits(have, + IEEE80211_EHT_MCS_NSS_RX); + have_tx_nss = u8_get_bits(have, + IEEE80211_EHT_MCS_NSS_TX); + + if (req_rx_nss > have_rx_nss || + req_tx_nss > have_tx_nss) + return false; + } + } + + return true; +} + +static bool ieee80211_chandef_usable(struct ieee80211_sub_if_data *sdata, + const struct cfg80211_chan_def *chandef, + u32 prohibited_flags) +{ + if (!cfg80211_chandef_usable(sdata->local->hw.wiphy, + chandef, prohibited_flags)) + return false; + + if (chandef->punctured && + ieee80211_hw_check(&sdata->local->hw, DISALLOW_PUNCTURING)) + return false; + + return true; +} + +static struct ieee802_11_elems * +ieee80211_determine_chan_mode(struct ieee80211_sub_if_data *sdata, + struct ieee80211_conn_settings *conn, + struct cfg80211_bss *cbss, int link_id, + struct ieee80211_chan_req *chanreq) +{ + const struct cfg80211_bss_ies *ies = rcu_dereference(cbss->ies); + struct ieee80211_bss *bss = (void *)cbss->priv; + struct ieee80211_channel *channel = cbss->channel; + struct ieee80211_elems_parse_params parse_params = { + .link_id = -1, + .from_ap = true, + .start = ies->data, + .len = ies->len, + }; + struct ieee802_11_elems *elems; + struct ieee80211_supported_band *sband; + struct cfg80211_chan_def ap_chandef; + enum ieee80211_conn_mode ap_mode; + int ret; + +again: + parse_params.mode = conn->mode; + elems = ieee802_11_parse_elems_full(&parse_params); + if (!elems) + return ERR_PTR(-ENOMEM); + + ap_mode = ieee80211_determine_ap_chan(sdata, channel, bss->vht_cap_info, + elems, false, conn, &ap_chandef); + + /* this should be impossible since parsing depends on our mode */ + if (WARN_ON(ap_mode > conn->mode)) { + ret = -EINVAL; + goto free; + } + + if (conn->mode != ap_mode) { + conn->mode = ap_mode; + kfree(elems); + goto again; + } + + mlme_link_id_dbg(sdata, link_id, "determined AP %pM to be %s\n", + cbss->bssid, ieee80211_conn_mode_str(ap_mode)); + + sband = sdata->local->hw.wiphy->bands[channel->band]; + + switch (channel->band) { + case NL80211_BAND_S1GHZ: + if (WARN_ON(ap_mode != IEEE80211_CONN_MODE_S1G)) { + ret = -EINVAL; + goto free; + } + return elems; + case NL80211_BAND_6GHZ: + if (ap_mode < IEEE80211_CONN_MODE_HE) { + sdata_info(sdata, + "Rejecting non-HE 6/7 GHz connection"); + ret = -EINVAL; + goto free; + } + break; + default: + if (WARN_ON(ap_mode == IEEE80211_CONN_MODE_S1G)) { + ret = -EINVAL; + goto free; + } + } + + switch (ap_mode) { + case IEEE80211_CONN_MODE_S1G: + WARN_ON(1); + ret = -EINVAL; + goto free; + case IEEE80211_CONN_MODE_LEGACY: + conn->bw_limit = IEEE80211_CONN_BW_LIMIT_20; + break; + case IEEE80211_CONN_MODE_HT: + conn->bw_limit = min_t(enum ieee80211_conn_bw_limit, + conn->bw_limit, + IEEE80211_CONN_BW_LIMIT_40); + break; + case IEEE80211_CONN_MODE_VHT: + case IEEE80211_CONN_MODE_HE: + conn->bw_limit = min_t(enum ieee80211_conn_bw_limit, + conn->bw_limit, + IEEE80211_CONN_BW_LIMIT_160); + break; + case IEEE80211_CONN_MODE_EHT: + conn->bw_limit = min_t(enum ieee80211_conn_bw_limit, + conn->bw_limit, + IEEE80211_CONN_BW_LIMIT_320); + break; + } + + chanreq->oper = ap_chandef; + + /* wider-bandwidth OFDMA is only done in EHT */ + if (conn->mode >= IEEE80211_CONN_MODE_EHT && + !(sdata->vif.driver_flags & IEEE80211_VIF_IGNORE_OFDMA_WIDER_BW)) + chanreq->ap = ap_chandef; + else + chanreq->ap.chan = NULL; + + while (!ieee80211_chandef_usable(sdata, &chanreq->oper, + IEEE80211_CHAN_DISABLED)) { + if (WARN_ON(chanreq->oper.width == NL80211_CHAN_WIDTH_20_NOHT)) { + ret = -EINVAL; + goto free; } - ret |= ieee80211_chandef_downgrade(chandef); + ieee80211_chanreq_downgrade(chanreq, conn); } - if (!he_oper || !cfg80211_chandef_usable(sdata->wdev.wiphy, chandef, - IEEE80211_CHAN_NO_HE)) - ret |= IEEE80211_CONN_DISABLE_HE | IEEE80211_CONN_DISABLE_EHT; + if (conn->mode >= IEEE80211_CONN_MODE_HE && + !cfg80211_chandef_usable(sdata->wdev.wiphy, &chanreq->oper, + IEEE80211_CHAN_NO_HE)) { + conn->mode = IEEE80211_CONN_MODE_VHT; + conn->bw_limit = min_t(enum ieee80211_conn_bw_limit, + conn->bw_limit, + IEEE80211_CONN_BW_LIMIT_160); + } - if (!eht_oper || !cfg80211_chandef_usable(sdata->wdev.wiphy, chandef, - IEEE80211_CHAN_NO_EHT)) - ret |= IEEE80211_CONN_DISABLE_EHT; + if (conn->mode >= IEEE80211_CONN_MODE_EHT && + !cfg80211_chandef_usable(sdata->wdev.wiphy, &chanreq->oper, + IEEE80211_CHAN_NO_EHT)) { + conn->mode = IEEE80211_CONN_MODE_HE; + conn->bw_limit = min_t(enum ieee80211_conn_bw_limit, + conn->bw_limit, + IEEE80211_CONN_BW_LIMIT_160); + } - if (chandef->width != vht_chandef.width && !tracking) + if (chanreq->oper.width != ap_chandef.width || ap_mode != conn->mode) sdata_info(sdata, - "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n"); + "regulatory prevented using AP config, downgraded\n"); - WARN_ON_ONCE(!cfg80211_chandef_valid(chandef)); - return ret; + if (conn->mode >= IEEE80211_CONN_MODE_HE && + (!ieee80211_verify_peer_he_mcs_support(sdata, (void *)elems->he_cap, + elems->he_operation) || + !ieee80211_verify_sta_he_mcs_support(sdata, sband, + elems->he_operation))) { + conn->mode = IEEE80211_CONN_MODE_VHT; + sdata_info(sdata, "required MCSes not supported, disabling HE\n"); + } + + if (conn->mode >= IEEE80211_CONN_MODE_EHT && + !ieee80211_verify_sta_eht_mcs_support(sdata, sband, + elems->eht_operation)) { + conn->mode = IEEE80211_CONN_MODE_HE; + conn->bw_limit = min_t(enum ieee80211_conn_bw_limit, + conn->bw_limit, + IEEE80211_CONN_BW_LIMIT_160); + sdata_info(sdata, "required MCSes not supported, disabling EHT\n"); + } + + /* the mode can only decrease, so this must terminate */ + if (ap_mode != conn->mode) { + kfree(elems); + goto again; + } + + mlme_link_id_dbg(sdata, link_id, + "connecting with %s mode, max bandwidth %d MHz\n", + ieee80211_conn_mode_str(conn->mode), + 20 * (1 << conn->bw_limit)); + + if (WARN_ON_ONCE(!cfg80211_chandef_valid(&chanreq->oper))) { + ret = -EINVAL; + goto free; + } + + return elems; +free: + kfree(elems); + return ERR_PTR(ret); } static int ieee80211_config_bw(struct ieee80211_link_data *link, - const struct ieee80211_ht_cap *ht_cap, - const struct ieee80211_vht_cap *vht_cap, - const struct ieee80211_ht_operation *ht_oper, - const struct ieee80211_vht_operation *vht_oper, - const struct ieee80211_he_operation *he_oper, - const struct ieee80211_eht_operation *eht_oper, - const struct ieee80211_s1g_oper_ie *s1g_oper, - const u8 *bssid, u64 *changed) + struct ieee802_11_elems *elems, + bool update, u64 *changed) { + struct ieee80211_channel *channel = link->conf->chanreq.oper.chan; struct ieee80211_sub_if_data *sdata = link->sdata; - struct ieee80211_local *local = sdata->local; - struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; - struct ieee80211_channel *chan = link->conf->chandef.chan; - struct ieee80211_supported_band *sband = - local->hw.wiphy->bands[chan->band]; - struct cfg80211_chan_def chandef; - u16 ht_opmode; - ieee80211_conn_flags_t flags; + struct ieee80211_chan_req chanreq = {}; + enum ieee80211_conn_mode ap_mode; u32 vht_cap_info = 0; + u16 ht_opmode; int ret; - /* if HT was/is disabled, don't track any bandwidth changes */ - if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT || !ht_oper) + /* don't track any bandwidth changes in legacy/S1G modes */ + if (link->u.mgd.conn.mode == IEEE80211_CONN_MODE_LEGACY || + link->u.mgd.conn.mode == IEEE80211_CONN_MODE_S1G) return 0; - /* don't check VHT if we associated as non-VHT station */ - if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT) - vht_oper = NULL; + if (elems->vht_cap_elem) + vht_cap_info = le32_to_cpu(elems->vht_cap_elem->vht_cap_info); + + ap_mode = ieee80211_determine_ap_chan(sdata, channel, vht_cap_info, + elems, true, &link->u.mgd.conn, + &chanreq.ap); - /* don't check HE if we associated as non-HE station */ - if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE || - !ieee80211_get_he_iftype_cap_vif(sband, &sdata->vif)) { - he_oper = NULL; - eht_oper = NULL; + if (ap_mode != link->u.mgd.conn.mode) { + link_info(link, + "AP appears to change mode (expected %s, found %s), disconnect\n", + ieee80211_conn_mode_str(link->u.mgd.conn.mode), + ieee80211_conn_mode_str(ap_mode)); + return -EINVAL; } - /* don't check EHT if we associated as non-EHT station */ - if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_EHT || - !ieee80211_get_eht_iftype_cap_vif(sband, &sdata->vif)) - eht_oper = NULL; + chanreq.oper = chanreq.ap; + if (link->u.mgd.conn.mode < IEEE80211_CONN_MODE_EHT || + sdata->vif.driver_flags & IEEE80211_VIF_IGNORE_OFDMA_WIDER_BW) + chanreq.ap.chan = NULL; /* - * if bss configuration changed store the new one - + * if HT operation mode changed store the new one - * this may be applicable even if channel is identical */ - ht_opmode = le16_to_cpu(ht_oper->operation_mode); - if (link->conf->ht_operation_mode != ht_opmode) { - *changed |= BSS_CHANGED_HT; - link->conf->ht_operation_mode = ht_opmode; + if (elems->ht_operation) { + ht_opmode = le16_to_cpu(elems->ht_operation->operation_mode); + if (link->conf->ht_operation_mode != ht_opmode) { + *changed |= BSS_CHANGED_HT; + link->conf->ht_operation_mode = ht_opmode; + } } - if (vht_cap) - vht_cap_info = le32_to_cpu(vht_cap->vht_cap_info); - - /* calculate new channel (type) based on HT/VHT/HE operation IEs */ - flags = ieee80211_determine_chantype(sdata, link, - link->u.mgd.conn_flags, - sband, chan, vht_cap_info, - ht_oper, vht_oper, - he_oper, eht_oper, - s1g_oper, &chandef, true); - /* * Downgrade the new channel if we associated with restricted - * capabilities. For example, if we associated as a 20 MHz STA - * to a 40 MHz AP (due to regulatory, capabilities or config - * reasons) then switching to a 40 MHz channel now won't do us - * any good -- we couldn't use it with the AP. + * bandwidth capabilities. For example, if we associated as a + * 20 MHz STA to a 40 MHz AP (due to regulatory, capabilities + * or config reasons) then switching to a 40 MHz channel now + * won't do us any good -- we couldn't use it with the AP. */ - if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_80P80MHZ && - chandef.width == NL80211_CHAN_WIDTH_80P80) - flags |= ieee80211_chandef_downgrade(&chandef); - if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_160MHZ && - chandef.width == NL80211_CHAN_WIDTH_160) - flags |= ieee80211_chandef_downgrade(&chandef); - if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_40MHZ && - chandef.width > NL80211_CHAN_WIDTH_20) - flags |= ieee80211_chandef_downgrade(&chandef); - - if (cfg80211_chandef_identical(&chandef, &link->conf->chandef)) + while (link->u.mgd.conn.bw_limit < + ieee80211_min_bw_limit_from_chandef(&chanreq.oper)) + ieee80211_chandef_downgrade(&chanreq.oper, NULL); + + if (ieee80211_chanreq_identical(&chanreq, &link->conf->chanreq)) return 0; link_info(link, - "AP %pM changed bandwidth, new config is %d.%03d MHz, width %d (%d.%03d/%d MHz)\n", - link->u.mgd.bssid, chandef.chan->center_freq, - chandef.chan->freq_offset, chandef.width, - chandef.center_freq1, chandef.freq1_offset, - chandef.center_freq2); - - if (flags != (link->u.mgd.conn_flags & - (IEEE80211_CONN_DISABLE_HT | - IEEE80211_CONN_DISABLE_VHT | - IEEE80211_CONN_DISABLE_HE | - IEEE80211_CONN_DISABLE_EHT | - IEEE80211_CONN_DISABLE_40MHZ | - IEEE80211_CONN_DISABLE_80P80MHZ | - IEEE80211_CONN_DISABLE_160MHZ | - IEEE80211_CONN_DISABLE_320MHZ)) || - !cfg80211_chandef_valid(&chandef)) { + "AP %pM changed bandwidth, new used config is %d.%03d MHz, width %d (%d.%03d/%d MHz)\n", + link->u.mgd.bssid, chanreq.oper.chan->center_freq, + chanreq.oper.chan->freq_offset, chanreq.oper.width, + chanreq.oper.center_freq1, chanreq.oper.freq1_offset, + chanreq.oper.center_freq2); + + if (!cfg80211_chandef_valid(&chanreq.oper)) { sdata_info(sdata, - "AP %pM changed caps/bw in a way we can't support (0x%x/0x%x) - disconnect\n", - link->u.mgd.bssid, flags, ifmgd->flags); + "AP %pM changed caps/bw in a way we can't support - disconnect\n", + link->u.mgd.bssid); return -EINVAL; } - ret = ieee80211_link_change_bandwidth(link, &chandef, changed); + if (!update) { + link->conf->chanreq = chanreq; + return 0; + } + /* + * We're tracking the current AP here, so don't do any further checks + * here. This keeps us from playing ping-pong with regulatory, without + * it the following can happen (for example): + * - connect to an AP with 80 MHz, world regdom allows 80 MHz + * - AP advertises regdom US + * - CRDA loads regdom US with 80 MHz prohibited (old database) + * - we detect an unsupported channel and disconnect + * - disconnect causes CRDA to reload world regdomain and the game + * starts anew. + * (see https://bugzilla.kernel.org/show_bug.cgi?id=70881) + * + * It seems possible that there are still scenarios with CSA or real + * bandwidth changes where a this could happen, but those cases are + * less common and wouldn't completely prevent using the AP. + */ + + ret = ieee80211_link_change_chanreq(link, &chanreq, changed); if (ret) { sdata_info(sdata, "AP %pM changed bandwidth to incompatible one - disconnect\n", @@ -612,7 +897,7 @@ static void ieee80211_add_ht_ie(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband, struct ieee80211_channel *channel, enum ieee80211_smps_mode smps, - ieee80211_conn_flags_t conn_flags) + const struct ieee80211_conn_settings *conn) { u8 *pos; u32 flags = channel->flags; @@ -647,7 +932,7 @@ static void ieee80211_add_ht_ie(struct ieee80211_sub_if_data *sdata, * capable of 40 MHz -- some broken APs will never fall * back to trying to transmit in 20 MHz. */ - if (conn_flags & IEEE80211_CONN_DISABLE_40MHZ) { + if (conn->bw_limit <= IEEE80211_CONN_BW_LIMIT_20) { cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; cap &= ~IEEE80211_HT_CAP_SGI_40; } @@ -686,7 +971,7 @@ static bool ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb, struct ieee80211_supported_band *sband, struct ieee80211_vht_cap *ap_vht_cap, - ieee80211_conn_flags_t conn_flags) + const struct ieee80211_conn_settings *conn) { struct ieee80211_local *local = sdata->local; u8 *pos; @@ -703,16 +988,7 @@ static bool ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata, /* determine capability flags */ cap = vht_cap.cap; - if (conn_flags & IEEE80211_CONN_DISABLE_80P80MHZ) { - u32 bw = cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; - - cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; - if (bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ || - bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ) - cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ; - } - - if (conn_flags & IEEE80211_CONN_DISABLE_160MHZ) { + if (conn->bw_limit <= IEEE80211_CONN_BW_LIMIT_80) { cap &= ~IEEE80211_VHT_CAP_SHORT_GI_160; cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; } @@ -769,79 +1045,12 @@ static bool ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata, return mu_mimo_owner; } -/* This function determines HE capability flags for the association - * and builds the IE. - */ -static void ieee80211_add_he_ie(struct ieee80211_sub_if_data *sdata, - struct sk_buff *skb, - struct ieee80211_supported_band *sband, - enum ieee80211_smps_mode smps_mode, - ieee80211_conn_flags_t conn_flags) -{ - u8 *pos, *pre_he_pos; - const struct ieee80211_sta_he_cap *he_cap; - u8 he_cap_size; - - he_cap = ieee80211_get_he_iftype_cap_vif(sband, &sdata->vif); - if (WARN_ON(!he_cap)) - return; - - /* get a max size estimate */ - he_cap_size = - 2 + 1 + sizeof(he_cap->he_cap_elem) + - ieee80211_he_mcs_nss_size(&he_cap->he_cap_elem) + - ieee80211_he_ppe_size(he_cap->ppe_thres[0], - he_cap->he_cap_elem.phy_cap_info); - pos = skb_put(skb, he_cap_size); - pre_he_pos = pos; - pos = ieee80211_ie_build_he_cap(conn_flags, - pos, he_cap, pos + he_cap_size); - /* trim excess if any */ - skb_trim(skb, skb->len - (pre_he_pos + he_cap_size - pos)); - - ieee80211_ie_build_he_6ghz_cap(sdata, smps_mode, skb); -} - -static void ieee80211_add_eht_ie(struct ieee80211_sub_if_data *sdata, - struct sk_buff *skb, - struct ieee80211_supported_band *sband) -{ - u8 *pos; - const struct ieee80211_sta_he_cap *he_cap; - const struct ieee80211_sta_eht_cap *eht_cap; - u8 eht_cap_size; - - he_cap = ieee80211_get_he_iftype_cap_vif(sband, &sdata->vif); - eht_cap = ieee80211_get_eht_iftype_cap_vif(sband, &sdata->vif); - - /* - * EHT capabilities element is only added if the HE capabilities element - * was added so assume that 'he_cap' is valid and don't check it. - */ - if (WARN_ON(!he_cap || !eht_cap)) - return; - - eht_cap_size = - 2 + 1 + sizeof(eht_cap->eht_cap_elem) + - ieee80211_eht_mcs_nss_size(&he_cap->he_cap_elem, - &eht_cap->eht_cap_elem, - false) + - ieee80211_eht_ppe_size(eht_cap->eht_ppe_thres[0], - eht_cap->eht_cap_elem.phy_cap_info); - pos = skb_put(skb, eht_cap_size); - ieee80211_ie_build_eht_cap(pos, he_cap, eht_cap, pos + eht_cap_size, - false); -} - static void ieee80211_assoc_add_rates(struct sk_buff *skb, enum nl80211_chan_width width, struct ieee80211_supported_band *sband, struct ieee80211_mgd_assoc_data *assoc_data) { - unsigned int rates_len, supp_rates_len; - u32 rates = 0; - int i, count; - u8 *pos; + u32 rates; if (assoc_data->supp_rates_len) { /* @@ -850,53 +1059,23 @@ static void ieee80211_assoc_add_rates(struct sk_buff *skb, * in the association request (e.g. D-Link DAP 1353 in * b-only mode)... */ - rates_len = ieee80211_parse_bitrates(width, sband, - assoc_data->supp_rates, - assoc_data->supp_rates_len, - &rates); + ieee80211_parse_bitrates(width, sband, + assoc_data->supp_rates, + assoc_data->supp_rates_len, + &rates); } else { /* * In case AP not provide any supported rates information * before association, we send information element(s) with * all rates that we support. */ - rates_len = sband->n_bitrates; - for (i = 0; i < sband->n_bitrates; i++) - rates |= BIT(i); + rates = ~0; } - supp_rates_len = rates_len; - if (supp_rates_len > 8) - supp_rates_len = 8; - - pos = skb_put(skb, supp_rates_len + 2); - *pos++ = WLAN_EID_SUPP_RATES; - *pos++ = supp_rates_len; - - count = 0; - for (i = 0; i < sband->n_bitrates; i++) { - if (BIT(i) & rates) { - int rate = DIV_ROUND_UP(sband->bitrates[i].bitrate, 5); - *pos++ = (u8)rate; - if (++count == 8) - break; - } - } - - if (rates_len > count) { - pos = skb_put(skb, rates_len - count + 2); - *pos++ = WLAN_EID_EXT_SUPP_RATES; - *pos++ = rates_len - count; - - for (i++; i < sband->n_bitrates; i++) { - if (BIT(i) & rates) { - int rate; - - rate = DIV_ROUND_UP(sband->bitrates[i].bitrate, 5); - *pos++ = (u8)rate; - } - } - } + ieee80211_put_srates_elem(skb, sband, 0, 0, ~rates, + WLAN_EID_SUPP_RATES); + ieee80211_put_srates_elem(skb, sband, 0, 0, ~rates, + WLAN_EID_EXT_SUPP_RATES); } static size_t ieee80211_add_before_ht_elems(struct sk_buff *skb, @@ -1133,11 +1312,11 @@ static size_t ieee80211_assoc_link_elems(struct ieee80211_sub_if_data *sdata, offset); if (sband->band != NL80211_BAND_6GHZ && - !(assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_HT)) { + assoc_data->link[link_id].conn.mode >= IEEE80211_CONN_MODE_HT) { ieee80211_add_ht_ie(sdata, skb, assoc_data->link[link_id].ap_ht_param, sband, chan, smps_mode, - assoc_data->link[link_id].conn_flags); + &assoc_data->link[link_id].conn); ADD_PRESENT_ELEM(WLAN_EID_HT_CAPABILITY); } @@ -1147,37 +1326,28 @@ static size_t ieee80211_assoc_link_elems(struct ieee80211_sub_if_data *sdata, offset); if (sband->band != NL80211_BAND_6GHZ && - !(assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_VHT)) { + assoc_data->link[link_id].conn.mode >= IEEE80211_CONN_MODE_VHT && + sband->vht_cap.vht_supported) { bool mu_mimo_owner = ieee80211_add_vht_ie(sdata, skb, sband, &assoc_data->link[link_id].ap_vht_cap, - assoc_data->link[link_id].conn_flags); + &assoc_data->link[link_id].conn); if (link) link->conf->mu_mimo_owner = mu_mimo_owner; ADD_PRESENT_ELEM(WLAN_EID_VHT_CAPABILITY); } - /* - * If AP doesn't support HT, mark HE and EHT as disabled. - * If on the 5GHz band, make sure it supports VHT. - */ - if (assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_HT || - (sband->band == NL80211_BAND_5GHZ && - assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_VHT)) - assoc_data->link[link_id].conn_flags |= - IEEE80211_CONN_DISABLE_HE | - IEEE80211_CONN_DISABLE_EHT; - /* if present, add any custom IEs that go before HE */ offset = ieee80211_add_before_he_elems(skb, extra_elems, extra_elems_len, offset); - if (!(assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_HE)) { - ieee80211_add_he_ie(sdata, skb, sband, smps_mode, - assoc_data->link[link_id].conn_flags); + if (assoc_data->link[link_id].conn.mode >= IEEE80211_CONN_MODE_HE) { + ieee80211_put_he_cap(skb, sdata, sband, + &assoc_data->link[link_id].conn); ADD_PRESENT_EXT_ELEM(WLAN_EID_EXT_HE_CAPABILITY); + ieee80211_put_he_6ghz_cap(skb, sdata, smps_mode); } /* @@ -1185,7 +1355,7 @@ static size_t ieee80211_assoc_link_elems(struct ieee80211_sub_if_data *sdata, * calling ieee80211_assoc_add_ml_elem(), so add this one if * we're going to put it after the ML element */ - if (!(assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_EHT)) + if (assoc_data->link[link_id].conn.mode >= IEEE80211_CONN_MODE_EHT) ADD_PRESENT_EXT_ELEM(WLAN_EID_EXT_EHT_CAPABILITY); if (link_id == assoc_data->assoc_link_id) @@ -1195,8 +1365,9 @@ static size_t ieee80211_assoc_link_elems(struct ieee80211_sub_if_data *sdata, /* crash if somebody gets it wrong */ present_elems = NULL; - if (!(assoc_data->link[link_id].conn_flags & IEEE80211_CONN_DISABLE_EHT)) - ieee80211_add_eht_ie(sdata, skb, sband); + if (assoc_data->link[link_id].conn.mode >= IEEE80211_CONN_MODE_EHT) + ieee80211_put_eht_cap(skb, sdata, sband, + &assoc_data->link[link_id].conn); if (sband->band == NL80211_BAND_S1GHZ) { ieee80211_add_aid_request_ie(sdata, skb); @@ -1206,9 +1377,6 @@ static size_t ieee80211_assoc_link_elems(struct ieee80211_sub_if_data *sdata, if (iftd && iftd->vendor_elems.data && iftd->vendor_elems.len) skb_put_data(skb, iftd->vendor_elems.data, iftd->vendor_elems.len); - if (link) - link->u.mgd.conn_flags = assoc_data->link[link_id].conn_flags; - return offset; } @@ -1318,8 +1486,6 @@ static void ieee80211_assoc_add_ml_elem(struct ieee80211_sub_if_data *sdata, cpu_to_le16(IEEE80211_MLC_BASIC_PRES_EML_CAPA); skb_put_data(skb, &eml_capa, sizeof(eml_capa)); } - /* need indication from userspace to support this */ - mld_capa_ops &= ~cpu_to_le16(IEEE80211_MLD_CAP_OP_TID_TO_LINK_MAP_NEG_SUPP); skb_put_data(skb, &mld_capa_ops, sizeof(mld_capa_ops)); for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) { @@ -1499,7 +1665,7 @@ static int ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata) /* Set MBSSID support for HE AP if needed */ if (ieee80211_hw_check(&local->hw, SUPPORTS_ONLY_HE_MULTI_BSSID) && - !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE) && + link->u.mgd.conn.mode >= IEEE80211_CONN_MODE_HE && ext_capa && ext_capa->datalen >= 3) ext_capa->data[2] |= WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT; @@ -1544,7 +1710,7 @@ static int ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata) * for some reason check it and want it to be set, set the bit for all * pre-EHT connections as we used to do. */ - if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_EHT) + if (link->u.mgd.conn.mode < IEEE80211_CONN_MODE_EHT) capab |= WLAN_CAPABILITY_ESS; /* add the elements for the assoc (main) link */ @@ -1741,8 +1907,8 @@ static void ieee80211_chswitch_work(struct wiphy *wiphy, return; } - if (!cfg80211_chandef_identical(&link->conf->chandef, - &link->csa_chandef)) { + if (!ieee80211_chanreq_identical(&link->conf->chanreq, + &link->csa_chanreq)) { sdata_info(sdata, "failed to finalize channel switch, disconnecting\n"); wiphy_work_queue(sdata->local->hw.wiphy, @@ -1767,19 +1933,15 @@ static void ieee80211_chswitch_post_beacon(struct ieee80211_link_data *link) WARN_ON(!link->conf->csa_active); - if (link->csa_block_tx) { + if (sdata->csa_blocked_queues) { ieee80211_wake_vif_queues(local, sdata, IEEE80211_QUEUE_STOP_REASON_CSA); - link->csa_block_tx = false; + sdata->csa_blocked_queues = false; } link->conf->csa_active = false; + link->u.mgd.csa_blocked_tx = false; link->u.mgd.csa_waiting_bcn = false; - /* - * If the CSA IE is still present on the beacon after the switch, - * we need to consider it as a new CSA (possibly to self). - */ - link->u.mgd.beacon_crc_valid = false; ret = drv_post_channel_switch(link); if (ret) { @@ -1790,8 +1952,8 @@ static void ieee80211_chswitch_post_beacon(struct ieee80211_link_data *link) return; } - cfg80211_ch_switch_notify(sdata->dev, &link->reserved_chandef, - link->link_id, 0); + cfg80211_ch_switch_notify(sdata->dev, &link->reserved.oper, + link->link_id); } void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success, @@ -1838,14 +2000,16 @@ ieee80211_sta_abort_chanswitch(struct ieee80211_link_data *link) ieee80211_link_unreserve_chanctx(link); - if (link->csa_block_tx) + if (sdata->csa_blocked_queues) { ieee80211_wake_vif_queues(local, sdata, IEEE80211_QUEUE_STOP_REASON_CSA); + sdata->csa_blocked_queues = false; + } - link->csa_block_tx = false; link->conf->csa_active = false; + link->u.mgd.csa_blocked_tx = false; - drv_abort_channel_switch(sdata); + drv_abort_channel_switch(link); } static void @@ -1857,12 +2021,14 @@ ieee80211_sta_process_chanswitch(struct ieee80211_link_data *link, struct ieee80211_sub_if_data *sdata = link->sdata; struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; - struct cfg80211_bss *cbss = link->u.mgd.bss; + struct cfg80211_bss *cbss = link->conf->bss; struct ieee80211_chanctx_conf *conf; struct ieee80211_chanctx *chanctx; enum nl80211_band current_band; struct ieee80211_csa_ie csa_ie; - struct ieee80211_channel_switch ch_switch; + struct ieee80211_channel_switch ch_switch = { + .link_id = link->link_id, + }; struct ieee80211_bss *bss; unsigned long timeout; int res; @@ -1876,14 +2042,14 @@ ieee80211_sta_process_chanswitch(struct ieee80211_link_data *link, bss = (void *)cbss->priv; res = ieee80211_parse_ch_switch_ie(sdata, elems, current_band, bss->vht_cap_info, - link->u.mgd.conn_flags, + &link->u.mgd.conn, link->u.mgd.bssid, &csa_ie); if (!res) { ch_switch.timestamp = timestamp; ch_switch.device_timestamp = device_timestamp; ch_switch.block_tx = csa_ie.mode; - ch_switch.chandef = csa_ie.chandef; + ch_switch.chandef = csa_ie.chanreq.oper; ch_switch.count = csa_ie.count; ch_switch.delay = csa_ie.max_switch_time; } @@ -1891,46 +2057,62 @@ ieee80211_sta_process_chanswitch(struct ieee80211_link_data *link, if (res < 0) goto drop_connection; - if (beacon && link->conf->csa_active && - !link->u.mgd.csa_waiting_bcn) { - if (res) + if (link->conf->csa_active) { + /* already processing - disregard action frames */ + if (!beacon) + return; + + if (link->u.mgd.csa_waiting_bcn) { + ieee80211_chswitch_post_beacon(link); + /* + * If the CSA IE is still present in the beacon after + * the switch, we need to consider it as a new CSA + * (possibly to self) - this happens by not returning + * here so we'll get to the check below. + */ + } else if (res) { ieee80211_sta_abort_chanswitch(link); - else + return; + } else { drv_channel_switch_rx_beacon(sdata, &ch_switch); - return; - } else if (link->conf->csa_active || res) { - /* disregard subsequent announcements if already processing */ - return; + return; + } } - if (link->conf->chandef.chan->band != - csa_ie.chandef.chan->band) { + /* nothing to do at all - no active CSA nor a new one */ + if (res) + return; + + if (link->conf->chanreq.oper.chan->band != + csa_ie.chanreq.oper.chan->band) { sdata_info(sdata, "AP %pM switches to different band (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n", link->u.mgd.bssid, - csa_ie.chandef.chan->center_freq, - csa_ie.chandef.width, csa_ie.chandef.center_freq1, - csa_ie.chandef.center_freq2); + csa_ie.chanreq.oper.chan->center_freq, + csa_ie.chanreq.oper.width, + csa_ie.chanreq.oper.center_freq1, + csa_ie.chanreq.oper.center_freq2); goto drop_connection; } - if (!cfg80211_chandef_usable(local->hw.wiphy, &csa_ie.chandef, + if (!cfg80211_chandef_usable(local->hw.wiphy, &csa_ie.chanreq.oper, IEEE80211_CHAN_DISABLED)) { sdata_info(sdata, "AP %pM switches to unsupported channel " "(%d.%03d MHz, width:%d, CF1/2: %d.%03d/%d MHz), " "disconnecting\n", link->u.mgd.bssid, - csa_ie.chandef.chan->center_freq, - csa_ie.chandef.chan->freq_offset, - csa_ie.chandef.width, csa_ie.chandef.center_freq1, - csa_ie.chandef.freq1_offset, - csa_ie.chandef.center_freq2); + csa_ie.chanreq.oper.chan->center_freq, + csa_ie.chanreq.oper.chan->freq_offset, + csa_ie.chanreq.oper.width, + csa_ie.chanreq.oper.center_freq1, + csa_ie.chanreq.oper.freq1_offset, + csa_ie.chanreq.oper.center_freq2); goto drop_connection; } - if (cfg80211_chandef_identical(&csa_ie.chandef, - &link->conf->chandef) && + if (cfg80211_chandef_identical(&csa_ie.chanreq.oper, + &link->conf->chanreq.oper) && (!csa_ie.mode || !beacon)) { if (link->u.mgd.csa_ignored_same_chan) return; @@ -1942,12 +2124,13 @@ ieee80211_sta_process_chanswitch(struct ieee80211_link_data *link, } /* - * Drop all TDLS peers - either we disconnect or move to a different - * channel from this point on. There's no telling what our peer will do. + * Drop all TDLS peers on the affected link - either we disconnect or + * move to a different channel from this point on. There's no telling + * what our peer will do. * The TDLS WIDER_BW scenario is also problematic, as peers might now * have an incompatible wider chandef. */ - ieee80211_teardown_tdls_peers(sdata); + ieee80211_teardown_tdls_peers(link); conf = rcu_dereference_protected(link->conf->chanctx_conf, lockdep_is_held(&local->hw.wiphy->mtx)); @@ -1959,8 +2142,7 @@ ieee80211_sta_process_chanswitch(struct ieee80211_link_data *link, chanctx = container_of(conf, struct ieee80211_chanctx, conf); - if (local->use_chanctx && - !ieee80211_hw_check(&local->hw, CHANCTX_STA_CSA)) { + if (!ieee80211_hw_check(&local->hw, CHANCTX_STA_CSA)) { sdata_info(sdata, "driver doesn't support chan-switch with channel contexts\n"); goto drop_connection; @@ -1972,7 +2154,7 @@ ieee80211_sta_process_chanswitch(struct ieee80211_link_data *link, goto drop_connection; } - res = ieee80211_link_reserve_chanctx(link, &csa_ie.chandef, + res = ieee80211_link_reserve_chanctx(link, &csa_ie.chanreq, chanctx->mode, false); if (res) { sdata_info(sdata, @@ -1982,18 +2164,21 @@ ieee80211_sta_process_chanswitch(struct ieee80211_link_data *link, } link->conf->csa_active = true; - link->csa_chandef = csa_ie.chandef; - link->csa_block_tx = csa_ie.mode; + link->csa_chanreq = csa_ie.chanreq; link->u.mgd.csa_ignored_same_chan = false; link->u.mgd.beacon_crc_valid = false; + link->u.mgd.csa_blocked_tx = csa_ie.mode; - if (link->csa_block_tx) + if (csa_ie.mode && + !ieee80211_hw_check(&local->hw, HANDLES_QUIET_CSA)) { ieee80211_stop_vif_queues(local, sdata, IEEE80211_QUEUE_STOP_REASON_CSA); + sdata->csa_blocked_queues = true; + } - cfg80211_ch_switch_started_notify(sdata->dev, &csa_ie.chandef, + cfg80211_ch_switch_started_notify(sdata->dev, &csa_ie.chanreq.oper, link->link_id, csa_ie.count, - csa_ie.mode, 0); + csa_ie.mode); if (local->ops->channel_switch) { /* use driver's channel switch callback */ @@ -2017,7 +2202,9 @@ ieee80211_sta_process_chanswitch(struct ieee80211_link_data *link, * reset when the disconnection worker runs. */ link->conf->csa_active = true; - link->csa_block_tx = csa_ie.mode; + link->u.mgd.csa_blocked_tx = csa_ie.mode; + sdata->csa_blocked_queues = + csa_ie.mode && !ieee80211_hw_check(&local->hw, HANDLES_QUIET_CSA); wiphy_work_queue(sdata->local->hw.wiphy, &ifmgd->csa_connection_drop_work); @@ -2414,7 +2601,7 @@ void ieee80211_dfs_cac_timer_work(struct wiphy *wiphy, struct wiphy_work *work) struct ieee80211_link_data *link = container_of(work, struct ieee80211_link_data, dfs_cac_timer_work.work); - struct cfg80211_chan_def chandef = link->conf->chandef; + struct cfg80211_chan_def chandef = link->conf->chanreq.oper; struct ieee80211_sub_if_data *sdata = link->sdata; lockdep_assert_wiphy(sdata->local->hw.wiphy); @@ -2769,7 +2956,7 @@ static u64 ieee80211_link_set_associated(struct ieee80211_link_data *link, ieee80211_check_rate_mask(link); - link->u.mgd.bss = cbss; + link->conf->bss = cbss; memcpy(link->u.mgd.bssid, cbss->bssid, ETH_ALEN); if (sdata->vif.p2p || @@ -2917,7 +3104,7 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, ifmgd->associated = false; /* other links will be destroyed */ - sdata->deflink.u.mgd.bss = NULL; + sdata->deflink.conf->bss = NULL; sdata->deflink.smps_mode = IEEE80211_SMPS_OFF; netif_carrier_off(sdata->dev); @@ -2992,7 +3179,7 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, sdata->vif.cfg.ssid_len = 0; /* remove AP and TDLS peers */ - sta_info_flush(sdata); + sta_info_flush(sdata, -1); /* finally reset all BSS / config parameters */ if (!ieee80211_vif_is_mld(&sdata->vif)) @@ -3058,7 +3245,6 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, sdata->deflink.u.mgd.disable_wmm_tracking = false; ifmgd->flags = 0; - sdata->deflink.u.mgd.conn_flags = 0; for (link_id = 0; link_id < ARRAY_SIZE(sdata->link); link_id++) { struct ieee80211_link_data *link; @@ -3070,27 +3256,38 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, } sdata->vif.bss_conf.csa_active = false; + sdata->deflink.u.mgd.csa_blocked_tx = false; sdata->deflink.u.mgd.csa_waiting_bcn = false; sdata->deflink.u.mgd.csa_ignored_same_chan = false; - if (sdata->deflink.csa_block_tx) { + if (sdata->csa_blocked_queues) { ieee80211_wake_vif_queues(local, sdata, IEEE80211_QUEUE_STOP_REASON_CSA); - sdata->deflink.csa_block_tx = false; + sdata->csa_blocked_queues = false; } /* existing TX TSPEC sessions no longer exist */ memset(ifmgd->tx_tspec, 0, sizeof(ifmgd->tx_tspec)); wiphy_delayed_work_cancel(local->hw.wiphy, &ifmgd->tx_tspec_wk); + sdata->vif.bss_conf.power_type = IEEE80211_REG_UNSET_AP; sdata->vif.bss_conf.pwr_reduction = 0; sdata->vif.bss_conf.tx_pwr_env_num = 0; memset(sdata->vif.bss_conf.tx_pwr_env, 0, sizeof(sdata->vif.bss_conf.tx_pwr_env)); + sdata->vif.cfg.eml_cap = 0; + sdata->vif.cfg.eml_med_sync_delay = 0; + sdata->vif.cfg.mld_capa_op = 0; + memset(&sdata->u.mgd.ttlm_info, 0, sizeof(sdata->u.mgd.ttlm_info)); wiphy_delayed_work_cancel(sdata->local->hw.wiphy, &ifmgd->ttlm_work); + + wiphy_delayed_work_cancel(sdata->local->hw.wiphy, + &ifmgd->neg_ttlm_timeout_work); ieee80211_vif_set_links(sdata, 0, 0); + + ifmgd->mcast_seq_last = IEEE80211_SN_MODULO; } static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata) @@ -3238,7 +3435,7 @@ static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata) ieee80211_mlme_send_probe_req(sdata, sdata->vif.addr, dst, sdata->vif.cfg.ssid, sdata->vif.cfg.ssid_len, - sdata->deflink.u.mgd.bss->channel); + sdata->deflink.conf->bss->channel); } ifmgd->probe_timeout = jiffies + msecs_to_jiffies(probe_wait_ms); @@ -3321,7 +3518,7 @@ struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw, return NULL; if (ifmgd->associated) - cbss = sdata->deflink.u.mgd.bss; + cbss = sdata->deflink.conf->bss; else if (ifmgd->auth_data) cbss = ifmgd->auth_data->bss; else if (ifmgd->assoc_data && ifmgd->assoc_data->link[0].bss) @@ -3371,16 +3568,32 @@ static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata) struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; - bool tx; + bool tx = false; lockdep_assert_wiphy(local->hw.wiphy); if (!ifmgd->associated) return; - /* in MLO assume we have a link where we can TX the frame */ - tx = ieee80211_vif_is_mld(&sdata->vif) || - !sdata->deflink.csa_block_tx; + /* only transmit if we have a link that makes that worthwhile */ + for (unsigned int link_id = 0; + link_id < ARRAY_SIZE(sdata->link); + link_id++) { + struct ieee80211_link_data *link; + + if (!ieee80211_vif_link_active(&sdata->vif, link_id)) + continue; + + link = sdata_dereference(sdata->link[link_id], sdata); + if (WARN_ON_ONCE(!link)) + continue; + + if (link->u.mgd.csa_blocked_tx) + continue; + + tx = true; + break; + } if (!ifmgd->driver_disconnect) { unsigned int link_id; @@ -3400,8 +3613,8 @@ static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata) link = sdata_dereference(sdata->link[link_id], sdata); if (!link) continue; - cfg80211_unlink_bss(local->hw.wiphy, link->u.mgd.bss); - link->u.mgd.bss = NULL; + cfg80211_unlink_bss(local->hw.wiphy, link->conf->bss); + link->conf->bss = NULL; } } @@ -3413,10 +3626,11 @@ static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata) /* the other links will be destroyed */ sdata->vif.bss_conf.csa_active = false; sdata->deflink.u.mgd.csa_waiting_bcn = false; - if (sdata->deflink.csa_block_tx) { + sdata->deflink.u.mgd.csa_blocked_tx = false; + if (sdata->csa_blocked_queues) { ieee80211_wake_vif_queues(local, sdata, IEEE80211_QUEUE_STOP_REASON_CSA); - sdata->deflink.csa_block_tx = false; + sdata->csa_blocked_queues = false; } ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), tx, @@ -3518,7 +3732,6 @@ static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data *sdata, sta_info_destroy_addr(sdata, auth_data->ap_addr); /* other links are destroyed */ - sdata->deflink.u.mgd.conn_flags = 0; eth_zero_addr(sdata->deflink.u.mgd.bssid); ieee80211_link_info_change_notify(sdata, &sdata->deflink, BSS_CHANGED_BSSID); @@ -3556,7 +3769,6 @@ static void ieee80211_destroy_assoc_data(struct ieee80211_sub_if_data *sdata, del_timer_sync(&sdata->u.mgd.timer); sta_info_destroy_addr(sdata, assoc_data->ap_addr); - sdata->deflink.u.mgd.conn_flags = 0; eth_zero_addr(sdata->deflink.u.mgd.bssid); ieee80211_link_info_change_notify(sdata, &sdata->deflink, BSS_CHANGED_BSSID); @@ -4006,11 +4218,13 @@ static bool ieee80211_assoc_config_link(struct ieee80211_link_data *link, struct ieee80211_local *local = sdata->local; unsigned int link_id = link->link_id; struct ieee80211_elems_parse_params parse_params = { + .mode = link->u.mgd.conn.mode, .start = elem_start, .len = elem_len, .link_id = link_id == assoc_data->assoc_link_id ? -1 : link_id, .from_ap = true, }; + bool is_5ghz = cbss->channel->band == NL80211_BAND_5GHZ; bool is_6ghz = cbss->channel->band == NL80211_BAND_6GHZ; bool is_s1g = cbss->channel->band == NL80211_BAND_S1GHZ; const struct cfg80211_bss_ies *bss_ies = NULL; @@ -4034,15 +4248,17 @@ static bool ieee80211_assoc_config_link(struct ieee80211_link_data *link, */ assoc_data->link[link_id].status = WLAN_STATUS_SUCCESS; if (elems->ml_basic) { - if (!(elems->ml_basic->control & - cpu_to_le16(IEEE80211_MLC_BASIC_PRES_BSS_PARAM_CH_CNT))) { + int bss_param_ch_cnt = + ieee80211_mle_get_bss_param_ch_cnt((const void *)elems->ml_basic); + + if (bss_param_ch_cnt < 0) { ret = false; goto out; } - link->u.mgd.bss_param_ch_cnt = - ieee80211_mle_get_bss_param_ch_cnt(elems->ml_basic); + link->u.mgd.bss_param_ch_cnt = bss_param_ch_cnt; } - } else if (!elems->prof || + } else if (elems->parse_error & IEEE80211_PARSE_ERR_DUP_NEST_ML_BASIC || + !elems->prof || !(elems->prof->control & prof_bss_param_ch_present)) { ret = false; goto out; @@ -4086,9 +4302,9 @@ static bool ieee80211_assoc_config_link(struct ieee80211_link_data *link, */ if (!is_6ghz && ((assoc_data->wmm && !elems->wmm_param) || - (!(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT) && + (link->u.mgd.conn.mode >= IEEE80211_CONN_MODE_HT && (!elems->ht_cap_elem || !elems->ht_operation)) || - (!(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT) && + (link->u.mgd.conn.mode >= IEEE80211_CONN_MODE_VHT && (!elems->vht_cap_elem || !elems->vht_operation)))) { const struct cfg80211_bss_ies *ies; struct ieee802_11_elems *bss_elems; @@ -4125,25 +4341,25 @@ static bool ieee80211_assoc_config_link(struct ieee80211_link_data *link, * have to include the IEs in the (re)association response. */ if (!elems->ht_cap_elem && bss_elems->ht_cap_elem && - !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT)) { + link->u.mgd.conn.mode >= IEEE80211_CONN_MODE_HT) { elems->ht_cap_elem = bss_elems->ht_cap_elem; sdata_info(sdata, "AP bug: HT capability missing from AssocResp\n"); } if (!elems->ht_operation && bss_elems->ht_operation && - !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT)) { + link->u.mgd.conn.mode >= IEEE80211_CONN_MODE_HT) { elems->ht_operation = bss_elems->ht_operation; sdata_info(sdata, "AP bug: HT operation missing from AssocResp\n"); } if (!elems->vht_cap_elem && bss_elems->vht_cap_elem && - !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT)) { + link->u.mgd.conn.mode >= IEEE80211_CONN_MODE_VHT) { elems->vht_cap_elem = bss_elems->vht_cap_elem; sdata_info(sdata, "AP bug: VHT capa missing from AssocResp\n"); } if (!elems->vht_operation && bss_elems->vht_operation && - !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT)) { + link->u.mgd.conn.mode >= IEEE80211_CONN_MODE_VHT) { elems->vht_operation = bss_elems->vht_operation; sdata_info(sdata, "AP bug: VHT operation missing from AssocResp\n"); @@ -4155,8 +4371,10 @@ static bool ieee80211_assoc_config_link(struct ieee80211_link_data *link, /* * We previously checked these in the beacon/probe response, so * they should be present here. This is just a safety net. + * Note that the ieee80211_config_bw() below would also check + * for this (and more), but this has better error reporting. */ - if (!is_6ghz && !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT) && + if (!is_6ghz && link->u.mgd.conn.mode >= IEEE80211_CONN_MODE_HT && (!elems->wmm_param || !elems->ht_cap_elem || !elems->ht_operation)) { sdata_info(sdata, "HT AP is missing WMM params or HT capability/operation\n"); @@ -4164,7 +4382,7 @@ static bool ieee80211_assoc_config_link(struct ieee80211_link_data *link, goto out; } - if (!is_6ghz && !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT) && + if (is_5ghz && link->u.mgd.conn.mode >= IEEE80211_CONN_MODE_VHT && (!elems->vht_cap_elem || !elems->vht_operation)) { sdata_info(sdata, "VHT AP is missing VHT capability/operation\n"); @@ -4172,36 +4390,28 @@ static bool ieee80211_assoc_config_link(struct ieee80211_link_data *link, goto out; } - if (is_6ghz && !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE) && - !elems->he_6ghz_capa) { - sdata_info(sdata, - "HE 6 GHz AP is missing HE 6 GHz band capability\n"); + /* check/update if AP changed anything in assoc response vs. scan */ + if (ieee80211_config_bw(link, elems, + link_id == assoc_data->assoc_link_id, + changed)) { ret = false; goto out; } - if (WARN_ON(!link->conf->chandef.chan)) { - ret = false; - goto out; - } - sband = local->hw.wiphy->bands[link->conf->chandef.chan->band]; - - if (!(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE) && - (!elems->he_cap || !elems->he_operation)) { - sdata_info(sdata, - "HE AP is missing HE capability/operation\n"); + if (WARN_ON(!link->conf->chanreq.oper.chan)) { ret = false; goto out; } + sband = local->hw.wiphy->bands[link->conf->chanreq.oper.chan->band]; /* Set up internal HT/VHT capabilities */ - if (elems->ht_cap_elem && !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT)) + if (elems->ht_cap_elem && link->u.mgd.conn.mode >= IEEE80211_CONN_MODE_HT) ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, elems->ht_cap_elem, link_sta); if (elems->vht_cap_elem && - !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT)) { + link->u.mgd.conn.mode >= IEEE80211_CONN_MODE_VHT) { const struct ieee80211_vht_cap *bss_vht_cap = NULL; const struct cfg80211_bss_ies *ies; @@ -4228,14 +4438,41 @@ static bool ieee80211_assoc_config_link(struct ieee80211_link_data *link, rcu_read_unlock(); } - if (elems->he_operation && !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE) && + if (elems->he_operation && + link->u.mgd.conn.mode >= IEEE80211_CONN_MODE_HE && elems->he_cap) { + const struct ieee80211_he_6ghz_oper *he_6ghz_oper; + ieee80211_he_cap_ie_to_sta_he_cap(sdata, sband, elems->he_cap, elems->he_cap_len, elems->he_6ghz_capa, link_sta); + he_6ghz_oper = ieee80211_he_6ghz_oper(elems->he_operation); + + if (is_6ghz && he_6ghz_oper) { + switch (u8_get_bits(he_6ghz_oper->control, + IEEE80211_HE_6GHZ_OPER_CTRL_REG_INFO)) { + case IEEE80211_6GHZ_CTRL_REG_LPI_AP: + bss_conf->power_type = IEEE80211_REG_LPI_AP; + break; + case IEEE80211_6GHZ_CTRL_REG_SP_AP: + bss_conf->power_type = IEEE80211_REG_SP_AP; + break; + case IEEE80211_6GHZ_CTRL_REG_VLP_AP: + bss_conf->power_type = IEEE80211_REG_VLP_AP; + break; + default: + bss_conf->power_type = IEEE80211_REG_UNSET_AP; + break; + } + } else if (is_6ghz) { + link_info(link, + "HE 6 GHz operation missing (on %d MHz), expect issues\n", + bss_conf->chanreq.oper.chan->center_freq); + } + bss_conf->he_support = link_sta->pub->he_cap.has_he; if (elems->rsnx && elems->rsnx_len && (elems->rsnx[0] & WLAN_RSNX_CAPA_PROTECTED_TWT) && @@ -4249,7 +4486,7 @@ static bool ieee80211_assoc_config_link(struct ieee80211_link_data *link, link_sta, elems); if (elems->eht_operation && elems->eht_cap && - !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_EHT)) { + link->u.mgd.conn.mode >= IEEE80211_CONN_MODE_EHT) { ieee80211_eht_cap_ie_to_sta_eht_cap(sdata, sband, elems->he_cap, elems->he_cap_len, @@ -4258,7 +4495,6 @@ static bool ieee80211_assoc_config_link(struct ieee80211_link_data *link, link_sta); bss_conf->eht_support = link_sta->pub->eht_cap.has_eht; - *changed |= BSS_CHANGED_EHT_PUNCTURING; } else { bss_conf->eht_support = false; } @@ -4456,7 +4692,7 @@ static u8 ieee80211_max_rx_chains(struct ieee80211_link_data *link, bool support_160; u8 chains = 1; - if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HT) + if (link->u.mgd.conn.mode < IEEE80211_CONN_MODE_HT) return chains; ht_cap_elem = ieee80211_bss_get_elem(cbss, WLAN_EID_HT_CAPABILITY); @@ -4469,7 +4705,7 @@ static u8 ieee80211_max_rx_chains(struct ieee80211_link_data *link, */ } - if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_VHT) + if (link->u.mgd.conn.mode < IEEE80211_CONN_MODE_VHT) return chains; vht_cap_elem = ieee80211_bss_get_elem(cbss, WLAN_EID_VHT_CAPABILITY); @@ -4488,7 +4724,7 @@ static u8 ieee80211_max_rx_chains(struct ieee80211_link_data *link, chains = max(chains, nss); } - if (link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE) + if (link->u.mgd.conn.mode < IEEE80211_CONN_MODE_HE) return chains; ies = rcu_dereference(cbss->ies); @@ -4539,533 +4775,331 @@ static u8 ieee80211_max_rx_chains(struct ieee80211_link_data *link, return chains; } -static bool -ieee80211_verify_peer_he_mcs_support(struct ieee80211_sub_if_data *sdata, - const struct cfg80211_bss_ies *ies, - const struct ieee80211_he_operation *he_op) +static void +ieee80211_determine_our_sta_mode(struct ieee80211_sub_if_data *sdata, + struct ieee80211_supported_band *sband, + struct cfg80211_assoc_request *req, + bool wmm_used, int link_id, + struct ieee80211_conn_settings *conn) { - const struct element *he_cap_elem; - const struct ieee80211_he_cap_elem *he_cap; - struct ieee80211_he_mcs_nss_supp *he_mcs_nss_supp; - u16 mcs_80_map_tx, mcs_80_map_rx; - u16 ap_min_req_set; - int mcs_nss_size; - int nss; - - he_cap_elem = cfg80211_find_ext_elem(WLAN_EID_EXT_HE_CAPABILITY, - ies->data, ies->len); - - if (!he_cap_elem) - return false; + struct ieee80211_sta_ht_cap sta_ht_cap = sband->ht_cap; + bool is_5ghz = sband->band == NL80211_BAND_5GHZ; + bool is_6ghz = sband->band == NL80211_BAND_6GHZ; + const struct ieee80211_sta_he_cap *he_cap; + const struct ieee80211_sta_eht_cap *eht_cap; + struct ieee80211_sta_vht_cap vht_cap; - /* invalid HE IE */ - if (he_cap_elem->datalen < 1 + sizeof(*he_cap)) { - sdata_info(sdata, - "Invalid HE elem, Disable HE\n"); - return false; + if (sband->band == NL80211_BAND_S1GHZ) { + conn->mode = IEEE80211_CONN_MODE_S1G; + conn->bw_limit = IEEE80211_CONN_BW_LIMIT_20; + mlme_dbg(sdata, "operating as S1G STA\n"); + return; } - /* skip one byte ext_tag_id */ - he_cap = (void *)(he_cap_elem->data + 1); - mcs_nss_size = ieee80211_he_mcs_nss_size(he_cap); + conn->mode = IEEE80211_CONN_MODE_LEGACY; + conn->bw_limit = IEEE80211_CONN_BW_LIMIT_20; - /* invalid HE IE */ - if (he_cap_elem->datalen < 1 + sizeof(*he_cap) + mcs_nss_size) { - sdata_info(sdata, - "Invalid HE elem with nss size, Disable HE\n"); - return false; + ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap); + + if (req && req->flags & ASSOC_REQ_DISABLE_HT) { + mlme_link_id_dbg(sdata, link_id, + "HT disabled by flag, limiting to legacy\n"); + goto out; } - /* mcs_nss is right after he_cap info */ - he_mcs_nss_supp = (void *)(he_cap + 1); + if (!wmm_used) { + mlme_link_id_dbg(sdata, link_id, + "WMM/QoS not supported, limiting to legacy\n"); + goto out; + } - mcs_80_map_tx = le16_to_cpu(he_mcs_nss_supp->tx_mcs_80); - mcs_80_map_rx = le16_to_cpu(he_mcs_nss_supp->rx_mcs_80); + if (req) { + unsigned int i; - /* P802.11-REVme/D0.3 - * 27.1.1 Introduction to the HE PHY - * ... - * An HE STA shall support the following features: - * ... - * Single spatial stream HE-MCSs 0 to 7 (transmit and receive) in all - * supported channel widths for HE SU PPDUs - */ - if ((mcs_80_map_tx & 0x3) == IEEE80211_HE_MCS_NOT_SUPPORTED || - (mcs_80_map_rx & 0x3) == IEEE80211_HE_MCS_NOT_SUPPORTED) { - sdata_info(sdata, - "Missing mandatory rates for 1 Nss, rx 0x%x, tx 0x%x, disable HE\n", - mcs_80_map_tx, mcs_80_map_rx); - return false; + for (i = 0; i < req->crypto.n_ciphers_pairwise; i++) { + if (req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP40 || + req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_TKIP || + req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP104) { + netdev_info(sdata->dev, + "WEP/TKIP use, limiting to legacy\n"); + goto out; + } + } } - if (!he_op) - return true; + if (!sta_ht_cap.ht_supported && !is_6ghz) { + mlme_link_id_dbg(sdata, link_id, + "HT not supported (and not on 6 GHz), limiting to legacy\n"); + goto out; + } - ap_min_req_set = le16_to_cpu(he_op->he_mcs_nss_set); + /* HT is fine */ + conn->mode = IEEE80211_CONN_MODE_HT; + conn->bw_limit = sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? + IEEE80211_CONN_BW_LIMIT_40 : + IEEE80211_CONN_BW_LIMIT_20; - /* - * Apparently iPhone 13 (at least iOS version 15.3.1) sets this to all - * zeroes, which is nonsense, and completely inconsistent with itself - * (it doesn't have 8 streams). Accept the settings in this case anyway. - */ - if (!ap_min_req_set) - return true; - - /* make sure the AP is consistent with itself - * - * P802.11-REVme/D0.3 - * 26.17.1 Basic HE BSS operation - * - * A STA that is operating in an HE BSS shall be able to receive and - * transmit at each of the <HE-MCS, NSS> tuple values indicated by the - * Basic HE-MCS And NSS Set field of the HE Operation parameter of the - * MLME-START.request primitive and shall be able to receive at each of - * the <HE-MCS, NSS> tuple values indicated by the Supported HE-MCS and - * NSS Set field in the HE Capabilities parameter of the MLMESTART.request - * primitive - */ - for (nss = 8; nss > 0; nss--) { - u8 ap_op_val = (ap_min_req_set >> (2 * (nss - 1))) & 3; - u8 ap_rx_val; - u8 ap_tx_val; + memcpy(&vht_cap, &sband->vht_cap, sizeof(vht_cap)); + ieee80211_apply_vhtcap_overrides(sdata, &vht_cap); - if (ap_op_val == IEEE80211_HE_MCS_NOT_SUPPORTED) - continue; + if (req && req->flags & ASSOC_REQ_DISABLE_VHT) { + mlme_link_id_dbg(sdata, link_id, + "VHT disabled by flag, limiting to HT\n"); + goto out; + } - ap_rx_val = (mcs_80_map_rx >> (2 * (nss - 1))) & 3; - ap_tx_val = (mcs_80_map_tx >> (2 * (nss - 1))) & 3; + if (vht_cap.vht_supported && is_5ghz) { + bool have_80mhz = false; + unsigned int i; - if (ap_rx_val == IEEE80211_HE_MCS_NOT_SUPPORTED || - ap_tx_val == IEEE80211_HE_MCS_NOT_SUPPORTED || - ap_rx_val < ap_op_val || ap_tx_val < ap_op_val) { - sdata_info(sdata, - "Invalid rates for %d Nss, rx %d, tx %d oper %d, disable HE\n", - nss, ap_rx_val, ap_rx_val, ap_op_val); - return false; + if (conn->bw_limit == IEEE80211_CONN_BW_LIMIT_20) { + mlme_link_id_dbg(sdata, link_id, + "no 40 MHz support on 5 GHz, limiting to HT\n"); + goto out; } - } - return true; -} + /* Allow VHT if at least one channel on the sband supports 80 MHz */ + for (i = 0; i < sband->n_channels; i++) { + if (sband->channels[i].flags & (IEEE80211_CHAN_DISABLED | + IEEE80211_CHAN_NO_80MHZ)) + continue; -static bool -ieee80211_verify_sta_he_mcs_support(struct ieee80211_sub_if_data *sdata, - struct ieee80211_supported_band *sband, - const struct ieee80211_he_operation *he_op) -{ - const struct ieee80211_sta_he_cap *sta_he_cap = - ieee80211_get_he_iftype_cap_vif(sband, &sdata->vif); - u16 ap_min_req_set; - int i; + have_80mhz = true; + break; + } - if (!sta_he_cap || !he_op) - return false; + if (!have_80mhz) { + mlme_link_id_dbg(sdata, link_id, + "no 80 MHz channel support on 5 GHz, limiting to HT\n"); + goto out; + } + } else if (is_5ghz) { /* !vht_supported but on 5 GHz */ + mlme_link_id_dbg(sdata, link_id, + "no VHT support on 5 GHz, limiting to HT\n"); + goto out; + } - ap_min_req_set = le16_to_cpu(he_op->he_mcs_nss_set); + /* VHT - if we have - is fine, including 80 MHz, check 160 below again */ + if (sband->band != NL80211_BAND_2GHZ) { + conn->mode = IEEE80211_CONN_MODE_VHT; + conn->bw_limit = IEEE80211_CONN_BW_LIMIT_160; + } - /* - * Apparently iPhone 13 (at least iOS version 15.3.1) sets this to all - * zeroes, which is nonsense, and completely inconsistent with itself - * (it doesn't have 8 streams). Accept the settings in this case anyway. - */ - if (!ap_min_req_set) - return true; + if (is_5ghz && + !(vht_cap.cap & (IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ | + IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ))) { + conn->bw_limit = IEEE80211_CONN_BW_LIMIT_80; + mlme_link_id_dbg(sdata, link_id, + "no VHT 160 MHz capability on 5 GHz, limiting to 80 MHz"); + } - /* Need to go over for 80MHz, 160MHz and for 80+80 */ - for (i = 0; i < 3; i++) { - const struct ieee80211_he_mcs_nss_supp *sta_mcs_nss_supp = - &sta_he_cap->he_mcs_nss_supp; - u16 sta_mcs_map_rx = - le16_to_cpu(((__le16 *)sta_mcs_nss_supp)[2 * i]); - u16 sta_mcs_map_tx = - le16_to_cpu(((__le16 *)sta_mcs_nss_supp)[2 * i + 1]); - u8 nss; - bool verified = true; + if (req && req->flags & ASSOC_REQ_DISABLE_HE) { + mlme_link_id_dbg(sdata, link_id, + "HE disabled by flag, limiting to HT/VHT\n"); + goto out; + } - /* - * For each band there is a maximum of 8 spatial streams - * possible. Each of the sta_mcs_map_* is a 16-bit struct built - * of 2 bits per NSS (1-8), with the values defined in enum - * ieee80211_he_mcs_support. Need to make sure STA TX and RX - * capabilities aren't less than the AP's minimum requirements - * for this HE BSS per SS. - * It is enough to find one such band that meets the reqs. - */ - for (nss = 8; nss > 0; nss--) { - u8 sta_rx_val = (sta_mcs_map_rx >> (2 * (nss - 1))) & 3; - u8 sta_tx_val = (sta_mcs_map_tx >> (2 * (nss - 1))) & 3; - u8 ap_val = (ap_min_req_set >> (2 * (nss - 1))) & 3; + he_cap = ieee80211_get_he_iftype_cap_vif(sband, &sdata->vif); + if (!he_cap) { + WARN_ON(is_6ghz); + mlme_link_id_dbg(sdata, link_id, + "no HE support, limiting to HT/VHT\n"); + goto out; + } - if (ap_val == IEEE80211_HE_MCS_NOT_SUPPORTED) - continue; + /* so we have HE */ + conn->mode = IEEE80211_CONN_MODE_HE; - /* - * Make sure the HE AP doesn't require MCSs that aren't - * supported by the client as required by spec - * - * P802.11-REVme/D0.3 - * 26.17.1 Basic HE BSS operation - * - * An HE STA shall not attempt to join * (MLME-JOIN.request primitive) - * a BSS, unless it supports (i.e., is able to both transmit and - * receive using) all of the <HE-MCS, NSS> tuples in the basic - * HE-MCS and NSS set. - */ - if (sta_rx_val == IEEE80211_HE_MCS_NOT_SUPPORTED || - sta_tx_val == IEEE80211_HE_MCS_NOT_SUPPORTED || - (ap_val > sta_rx_val) || (ap_val > sta_tx_val)) { - verified = false; - break; - } + /* check bandwidth */ + switch (sband->band) { + default: + case NL80211_BAND_2GHZ: + if (he_cap->he_cap_elem.phy_cap_info[0] & + IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_IN_2G) + break; + conn->bw_limit = IEEE80211_CONN_BW_LIMIT_20; + mlme_link_id_dbg(sdata, link_id, + "no 40 MHz HE cap in 2.4 GHz, limiting to 20 MHz\n"); + break; + case NL80211_BAND_5GHZ: + if (!(he_cap->he_cap_elem.phy_cap_info[0] & + IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G)) { + conn->bw_limit = IEEE80211_CONN_BW_LIMIT_20; + mlme_link_id_dbg(sdata, link_id, + "no 40/80 MHz HE cap in 5 GHz, limiting to 20 MHz\n"); + break; } - - if (verified) - return true; + if (!(he_cap->he_cap_elem.phy_cap_info[0] & + IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G)) { + conn->bw_limit = min_t(enum ieee80211_conn_bw_limit, + conn->bw_limit, + IEEE80211_CONN_BW_LIMIT_80); + mlme_link_id_dbg(sdata, link_id, + "no 160 MHz HE cap in 5 GHz, limiting to 80 MHz\n"); + } + break; + case NL80211_BAND_6GHZ: + if (he_cap->he_cap_elem.phy_cap_info[0] & + IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G) + break; + conn->bw_limit = min_t(enum ieee80211_conn_bw_limit, + conn->bw_limit, + IEEE80211_CONN_BW_LIMIT_80); + mlme_link_id_dbg(sdata, link_id, + "no 160 MHz HE cap in 6 GHz, limiting to 80 MHz\n"); + break; } - /* If here, STA doesn't meet AP's HE min requirements */ - return false; -} + if (req && req->flags & ASSOC_REQ_DISABLE_EHT) { + mlme_link_id_dbg(sdata, link_id, + "EHT disabled by flag, limiting to HE\n"); + goto out; + } -static u8 -ieee80211_get_eht_cap_mcs_nss(const struct ieee80211_sta_he_cap *sta_he_cap, - const struct ieee80211_sta_eht_cap *sta_eht_cap, - unsigned int idx, int bw) -{ - u8 he_phy_cap0 = sta_he_cap->he_cap_elem.phy_cap_info[0]; - u8 eht_phy_cap0 = sta_eht_cap->eht_cap_elem.phy_cap_info[0]; + eht_cap = ieee80211_get_eht_iftype_cap_vif(sband, &sdata->vif); + if (!eht_cap) { + mlme_link_id_dbg(sdata, link_id, + "no EHT support, limiting to HE\n"); + goto out; + } - /* handle us being a 20 MHz-only EHT STA - with four values - * for MCS 0-7, 8-9, 10-11, 12-13. - */ - if (!(he_phy_cap0 & IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_MASK_ALL)) - return sta_eht_cap->eht_mcs_nss_supp.only_20mhz.rx_tx_max_nss[idx]; + /* we have EHT */ - /* the others have MCS 0-9 together, rather than separately from 0-7 */ - if (idx > 0) - idx--; + conn->mode = IEEE80211_CONN_MODE_EHT; - switch (bw) { - case 0: - return sta_eht_cap->eht_mcs_nss_supp.bw._80.rx_tx_max_nss[idx]; - case 1: - if (!(he_phy_cap0 & - (IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G | - IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G))) - return 0xff; /* pass check */ - return sta_eht_cap->eht_mcs_nss_supp.bw._160.rx_tx_max_nss[idx]; - case 2: - if (!(eht_phy_cap0 & IEEE80211_EHT_PHY_CAP0_320MHZ_IN_6GHZ)) - return 0xff; /* pass check */ - return sta_eht_cap->eht_mcs_nss_supp.bw._320.rx_tx_max_nss[idx]; - } + /* check bandwidth */ + if (is_6ghz && + eht_cap->eht_cap_elem.phy_cap_info[0] & IEEE80211_EHT_PHY_CAP0_320MHZ_IN_6GHZ) + conn->bw_limit = IEEE80211_CONN_BW_LIMIT_320; + else if (is_6ghz) + mlme_link_id_dbg(sdata, link_id, + "no EHT 320 MHz cap in 6 GHz, limiting to 160 MHz\n"); - WARN_ON(1); - return 0; +out: + mlme_link_id_dbg(sdata, link_id, + "determined local STA to be %s, BW limited to %d MHz\n", + ieee80211_conn_mode_str(conn->mode), + 20 * (1 << conn->bw_limit)); } -static bool -ieee80211_verify_sta_eht_mcs_support(struct ieee80211_sub_if_data *sdata, - struct ieee80211_supported_band *sband, - const struct ieee80211_eht_operation *eht_op) +static void +ieee80211_determine_our_sta_mode_auth(struct ieee80211_sub_if_data *sdata, + struct ieee80211_supported_band *sband, + struct cfg80211_auth_request *req, + bool wmm_used, + struct ieee80211_conn_settings *conn) { - const struct ieee80211_sta_he_cap *sta_he_cap = - ieee80211_get_he_iftype_cap_vif(sband, &sdata->vif); - const struct ieee80211_sta_eht_cap *sta_eht_cap = - ieee80211_get_eht_iftype_cap_vif(sband, &sdata->vif); - const struct ieee80211_eht_mcs_nss_supp_20mhz_only *req; - unsigned int i; - - if (!sta_he_cap || !sta_eht_cap || !eht_op) - return false; + ieee80211_determine_our_sta_mode(sdata, sband, NULL, wmm_used, + req->link_id > 0 ? req->link_id : 0, + conn); +} - req = &eht_op->basic_mcs_nss; +static void +ieee80211_determine_our_sta_mode_assoc(struct ieee80211_sub_if_data *sdata, + struct ieee80211_supported_band *sband, + struct cfg80211_assoc_request *req, + bool wmm_used, int link_id, + struct ieee80211_conn_settings *conn) +{ + struct ieee80211_conn_settings tmp; - for (i = 0; i < ARRAY_SIZE(req->rx_tx_max_nss); i++) { - u8 req_rx_nss, req_tx_nss; - unsigned int bw; + WARN_ON(!req); - req_rx_nss = u8_get_bits(req->rx_tx_max_nss[i], - IEEE80211_EHT_MCS_NSS_RX); - req_tx_nss = u8_get_bits(req->rx_tx_max_nss[i], - IEEE80211_EHT_MCS_NSS_TX); + ieee80211_determine_our_sta_mode(sdata, sband, req, wmm_used, link_id, + &tmp); - for (bw = 0; bw < 3; bw++) { - u8 have, have_rx_nss, have_tx_nss; - - have = ieee80211_get_eht_cap_mcs_nss(sta_he_cap, - sta_eht_cap, - i, bw); - have_rx_nss = u8_get_bits(have, - IEEE80211_EHT_MCS_NSS_RX); - have_tx_nss = u8_get_bits(have, - IEEE80211_EHT_MCS_NSS_TX); - - if (req_rx_nss > have_rx_nss || - req_tx_nss > have_tx_nss) - return false; - } - } - - return true; + conn->mode = min_t(enum ieee80211_conn_mode, + conn->mode, tmp.mode); + conn->bw_limit = min_t(enum ieee80211_conn_bw_limit, + conn->bw_limit, tmp.bw_limit); } static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata, struct ieee80211_link_data *link, - struct cfg80211_bss *cbss, - bool mlo, - ieee80211_conn_flags_t *conn_flags) + int link_id, + struct cfg80211_bss *cbss, bool mlo, + struct ieee80211_conn_settings *conn) { struct ieee80211_local *local = sdata->local; - const struct ieee80211_ht_cap *ht_cap = NULL; - const struct ieee80211_ht_operation *ht_oper = NULL; - const struct ieee80211_vht_operation *vht_oper = NULL; - const struct ieee80211_he_operation *he_oper = NULL; - const struct ieee80211_eht_operation *eht_oper = NULL; - const struct ieee80211_s1g_oper_ie *s1g_oper = NULL; - struct ieee80211_supported_band *sband; - struct cfg80211_chan_def chandef; bool is_6ghz = cbss->channel->band == NL80211_BAND_6GHZ; - bool is_5ghz = cbss->channel->band == NL80211_BAND_5GHZ; - bool supports_mlo = false; - struct ieee80211_bss *bss = (void *)cbss->priv; - struct ieee80211_elems_parse_params parse_params = { - .link_id = -1, - .from_ap = true, - }; + struct ieee80211_chan_req chanreq = {}; struct ieee802_11_elems *elems; - const struct cfg80211_bss_ies *ies; int ret; u32 i; - bool have_80mhz; lockdep_assert_wiphy(local->hw.wiphy); rcu_read_lock(); + elems = ieee80211_determine_chan_mode(sdata, conn, cbss, link_id, + &chanreq); - ies = rcu_dereference(cbss->ies); - parse_params.start = ies->data; - parse_params.len = ies->len; - elems = ieee802_11_parse_elems_full(&parse_params); - if (!elems) { + if (IS_ERR(elems)) { rcu_read_unlock(); - return -ENOMEM; + return PTR_ERR(elems); } - sband = local->hw.wiphy->bands[cbss->channel->band]; - - *conn_flags &= ~(IEEE80211_CONN_DISABLE_40MHZ | - IEEE80211_CONN_DISABLE_80P80MHZ | - IEEE80211_CONN_DISABLE_160MHZ); - - /* disable HT/VHT/HE if we don't support them */ - if (!sband->ht_cap.ht_supported && !is_6ghz) { - mlme_dbg(sdata, "HT not supported, disabling HT/VHT/HE/EHT\n"); - *conn_flags |= IEEE80211_CONN_DISABLE_HT; - *conn_flags |= IEEE80211_CONN_DISABLE_VHT; - *conn_flags |= IEEE80211_CONN_DISABLE_HE; - *conn_flags |= IEEE80211_CONN_DISABLE_EHT; - } - - if (!sband->vht_cap.vht_supported && is_5ghz) { - mlme_dbg(sdata, "VHT not supported, disabling VHT/HE/EHT\n"); - *conn_flags |= IEEE80211_CONN_DISABLE_VHT; - *conn_flags |= IEEE80211_CONN_DISABLE_HE; - *conn_flags |= IEEE80211_CONN_DISABLE_EHT; - } - - if (!ieee80211_get_he_iftype_cap_vif(sband, &sdata->vif)) { - mlme_dbg(sdata, "HE not supported, disabling HE and EHT\n"); - *conn_flags |= IEEE80211_CONN_DISABLE_HE; - *conn_flags |= IEEE80211_CONN_DISABLE_EHT; - } - - if (!ieee80211_get_eht_iftype_cap_vif(sband, &sdata->vif)) { - mlme_dbg(sdata, "EHT not supported, disabling EHT\n"); - *conn_flags |= IEEE80211_CONN_DISABLE_EHT; - } - - if (!(*conn_flags & IEEE80211_CONN_DISABLE_HT) && !is_6ghz) { - ht_oper = elems->ht_operation; - ht_cap = elems->ht_cap_elem; - - if (!ht_cap) { - *conn_flags |= IEEE80211_CONN_DISABLE_HT; - ht_oper = NULL; - } - } - - if (!(*conn_flags & IEEE80211_CONN_DISABLE_VHT) && !is_6ghz) { - vht_oper = elems->vht_operation; - if (vht_oper && !ht_oper) { - vht_oper = NULL; - sdata_info(sdata, - "AP advertised VHT without HT, disabling HT/VHT/HE\n"); - *conn_flags |= IEEE80211_CONN_DISABLE_HT; - *conn_flags |= IEEE80211_CONN_DISABLE_VHT; - *conn_flags |= IEEE80211_CONN_DISABLE_HE; - *conn_flags |= IEEE80211_CONN_DISABLE_EHT; - } - - if (!elems->vht_cap_elem) { - *conn_flags |= IEEE80211_CONN_DISABLE_VHT; - vht_oper = NULL; - } + if (mlo && !elems->ml_basic) { + sdata_info(sdata, "Rejecting MLO as it is not supported by AP\n"); + rcu_read_unlock(); + kfree(elems); + return -EINVAL; } - if (!(*conn_flags & IEEE80211_CONN_DISABLE_HE)) { - he_oper = elems->he_operation; - - if (link && is_6ghz) { - struct ieee80211_bss_conf *bss_conf; - u8 j = 0; - - bss_conf = link->conf; - - if (elems->pwr_constr_elem) - bss_conf->pwr_reduction = *elems->pwr_constr_elem; - - BUILD_BUG_ON(ARRAY_SIZE(bss_conf->tx_pwr_env) != - ARRAY_SIZE(elems->tx_pwr_env)); - - for (i = 0; i < elems->tx_pwr_env_num; i++) { - if (elems->tx_pwr_env_len[i] > - sizeof(bss_conf->tx_pwr_env[j])) - continue; - - bss_conf->tx_pwr_env_num++; - memcpy(&bss_conf->tx_pwr_env[j], elems->tx_pwr_env[i], - elems->tx_pwr_env_len[i]); - j++; - } - } - - if (!ieee80211_verify_peer_he_mcs_support(sdata, ies, he_oper) || - !ieee80211_verify_sta_he_mcs_support(sdata, sband, he_oper)) - *conn_flags |= IEEE80211_CONN_DISABLE_HE | - IEEE80211_CONN_DISABLE_EHT; - } + if (link && is_6ghz && conn->mode >= IEEE80211_CONN_MODE_HE) { + struct ieee80211_bss_conf *bss_conf; + u8 j = 0; - /* - * EHT requires HE to be supported as well. Specifically for 6 GHz - * channels, the operation channel information can only be deduced from - * both the 6 GHz operation information (from the HE operation IE) and - * EHT operation. - */ - if (!(*conn_flags & - (IEEE80211_CONN_DISABLE_HE | - IEEE80211_CONN_DISABLE_EHT)) && - he_oper) { - const struct cfg80211_bss_ies *cbss_ies; - const struct element *eht_ml_elem; - const u8 *eht_oper_ie; - - cbss_ies = rcu_dereference(cbss->ies); - eht_oper_ie = cfg80211_find_ext_ie(WLAN_EID_EXT_EHT_OPERATION, - cbss_ies->data, cbss_ies->len); - if (eht_oper_ie && eht_oper_ie[1] >= - 1 + sizeof(struct ieee80211_eht_operation)) - eht_oper = (void *)(eht_oper_ie + 3); - else - eht_oper = NULL; + bss_conf = link->conf; - if (!ieee80211_verify_sta_eht_mcs_support(sdata, sband, eht_oper)) - *conn_flags |= IEEE80211_CONN_DISABLE_EHT; + if (elems->pwr_constr_elem) + bss_conf->pwr_reduction = *elems->pwr_constr_elem; - eht_ml_elem = cfg80211_find_ext_elem(WLAN_EID_EXT_EHT_MULTI_LINK, - cbss_ies->data, cbss_ies->len); + BUILD_BUG_ON(ARRAY_SIZE(bss_conf->tx_pwr_env) != + ARRAY_SIZE(elems->tx_pwr_env)); - /* data + 1 / datalen - 1 since it's an extended element */ - if (!(*conn_flags & IEEE80211_CONN_DISABLE_EHT) && - eht_ml_elem && - ieee80211_mle_type_ok(eht_ml_elem->data + 1, - IEEE80211_ML_CONTROL_TYPE_BASIC, - eht_ml_elem->datalen - 1)) { - supports_mlo = true; + for (i = 0; i < elems->tx_pwr_env_num; i++) { + if (elems->tx_pwr_env_len[i] > sizeof(bss_conf->tx_pwr_env[j])) + continue; - sdata->vif.cfg.eml_cap = - ieee80211_mle_get_eml_cap(eht_ml_elem->data + 1); - sdata->vif.cfg.eml_med_sync_delay = - ieee80211_mle_get_eml_med_sync_delay(eht_ml_elem->data + 1); + bss_conf->tx_pwr_env_num++; + memcpy(&bss_conf->tx_pwr_env[j], elems->tx_pwr_env[i], + elems->tx_pwr_env_len[i]); + j++; } } - - /* Allow VHT if at least one channel on the sband supports 80 MHz */ - have_80mhz = false; - for (i = 0; i < sband->n_channels; i++) { - if (sband->channels[i].flags & (IEEE80211_CHAN_DISABLED | - IEEE80211_CHAN_NO_80MHZ)) - continue; - - have_80mhz = true; - break; - } - - if (!have_80mhz) { - sdata_info(sdata, "80 MHz not supported, disabling VHT\n"); - *conn_flags |= IEEE80211_CONN_DISABLE_VHT; - } - - if (sband->band == NL80211_BAND_S1GHZ) { - s1g_oper = elems->s1g_oper; - if (!s1g_oper) - sdata_info(sdata, - "AP missing S1G operation element?\n"); - } - - *conn_flags |= - ieee80211_determine_chantype(sdata, link, *conn_flags, - sband, - cbss->channel, - bss->vht_cap_info, - ht_oper, vht_oper, - he_oper, eht_oper, - s1g_oper, - &chandef, false); - - if (link) - link->needed_rx_chains = - min(ieee80211_max_rx_chains(link, cbss), - local->rx_chains); - rcu_read_unlock(); /* the element data was RCU protected so no longer valid anyway */ kfree(elems); elems = NULL; - if (*conn_flags & IEEE80211_CONN_DISABLE_HE && is_6ghz) { - sdata_info(sdata, "Rejecting non-HE 6/7 GHz connection"); - return -EINVAL; - } - - if (mlo && !supports_mlo) { - sdata_info(sdata, "Rejecting MLO as it is not supported by AP\n"); - return -EINVAL; - } - if (!link) return 0; + rcu_read_lock(); + link->needed_rx_chains = min(ieee80211_max_rx_chains(link, cbss), + local->rx_chains); + rcu_read_unlock(); + /* * If this fails (possibly due to channel context sharing * on incompatible channels, e.g. 80+80 and 160 sharing the * same control channel) try to use a smaller bandwidth. */ - ret = ieee80211_link_use_channel(link, &chandef, + ret = ieee80211_link_use_channel(link, &chanreq, IEEE80211_CHANCTX_SHARED); /* don't downgrade for 5 and 10 MHz channels, though. */ - if (chandef.width == NL80211_CHAN_WIDTH_5 || - chandef.width == NL80211_CHAN_WIDTH_10) - goto out; + if (chanreq.oper.width == NL80211_CHAN_WIDTH_5 || + chanreq.oper.width == NL80211_CHAN_WIDTH_10) + return ret; + + while (ret && chanreq.oper.width != NL80211_CHAN_WIDTH_20_NOHT) { + ieee80211_chanreq_downgrade(&chanreq, conn); - while (ret && chandef.width != NL80211_CHAN_WIDTH_20_NOHT) { - *conn_flags |= - ieee80211_chandef_downgrade(&chandef); - ret = ieee80211_link_use_channel(link, &chandef, + ret = ieee80211_link_use_channel(link, &chanreq, IEEE80211_CHANCTX_SHARED); } - out: + return ret; } @@ -5126,6 +5160,8 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, if (WARN_ON(!sta)) goto out_err; + sta->sta.spp_amsdu = assoc_data->spp_amsdu; + if (ieee80211_vif_is_mld(&sdata->vif)) { for (link_id = 0; link_id < IEEE80211_MLD_MAX_NUM_LINKS; link_id++) { if (!assoc_data->link[link_id].bss) @@ -5189,8 +5225,10 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, link->conf->dtim_period = link->u.mgd.dtim_period ?: 1; if (link_id != assoc_data->assoc_link_id) { - err = ieee80211_prep_channel(sdata, link, cbss, true, - &link->u.mgd.conn_flags); + link->u.mgd.conn = assoc_data->link[link_id].conn; + + err = ieee80211_prep_channel(sdata, link, link_id, cbss, + true, &link->u.mgd.conn); if (err) { link_info(link, "prep_channel failed\n"); goto out_err; @@ -5308,6 +5346,9 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, if (!assoc_data) return; + parse_params.mode = + assoc_data->link[assoc_data->assoc_link_id].conn.mode; + if (!ether_addr_equal(assoc_data->ap_addr, mgmt->bssid) || !ether_addr_equal(assoc_data->ap_addr, mgmt->sa)) return; @@ -5424,6 +5465,13 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, assoc_data->ap_addr); goto abandon_assoc; } + + sdata->vif.cfg.eml_cap = + ieee80211_mle_get_eml_cap((const void *)elems->ml_basic); + sdata->vif.cfg.eml_med_sync_delay = + ieee80211_mle_get_eml_med_sync_delay((const void *)elems->ml_basic); + sdata->vif.cfg.mld_capa_op = + ieee80211_mle_get_mld_capa_op((const void *)elems->ml_basic); } sdata->vif.cfg.aid = aid; @@ -5686,49 +5734,6 @@ static bool ieee80211_rx_our_beacon(const u8 *tx_bssid, return ether_addr_equal(tx_bssid, bss->transmitted_bss->bssid); } -static bool ieee80211_config_puncturing(struct ieee80211_link_data *link, - const struct ieee80211_eht_operation *eht_oper, - u64 *changed) -{ - struct ieee80211_local *local = link->sdata->local; - u16 bitmap = 0, extracted; - - if ((eht_oper->params & IEEE80211_EHT_OPER_INFO_PRESENT) && - (eht_oper->params & - IEEE80211_EHT_OPER_DISABLED_SUBCHANNEL_BITMAP_PRESENT)) { - const struct ieee80211_eht_operation_info *info = - (void *)eht_oper->optional; - const u8 *disable_subchannel_bitmap = info->optional; - - bitmap = get_unaligned_le16(disable_subchannel_bitmap); - } - - extracted = ieee80211_extract_dis_subch_bmap(eht_oper, - &link->conf->chandef, - bitmap); - - /* accept if there are no changes */ - if (!(*changed & BSS_CHANGED_BANDWIDTH) && - extracted == link->conf->eht_puncturing) - return true; - - if (!cfg80211_valid_disable_subchannel_bitmap(&bitmap, - &link->conf->chandef)) { - link_info(link, - "Got an invalid disable subchannel bitmap from AP %pM: bitmap = 0x%x, bw = 0x%x. disconnect\n", - link->u.mgd.bssid, - bitmap, - link->conf->chandef.width); - return false; - } - - if (bitmap && ieee80211_hw_check(&local->hw, DISALLOW_PUNCTURING)) - return false; - - ieee80211_handle_puncturing_bitmap(link, eht_oper, bitmap, changed); - return true; -} - static void ieee80211_ml_reconf_work(struct wiphy *wiphy, struct wiphy_work *work) { @@ -5792,9 +5797,7 @@ out: static void ieee80211_ml_reconfiguration(struct ieee80211_sub_if_data *sdata, struct ieee802_11_elems *elems) { - const struct ieee80211_multi_link_elem *ml; const struct element *sub; - ssize_t ml_len; unsigned long removed_links = 0; u16 link_removal_timeout[IEEE80211_MLD_MAX_NUM_LINKS] = {}; u8 link_id; @@ -5803,24 +5806,11 @@ static void ieee80211_ml_reconfiguration(struct ieee80211_sub_if_data *sdata, if (!ieee80211_vif_is_mld(&sdata->vif) || !elems->ml_reconf) return; - ml_len = cfg80211_defragment_element(elems->ml_reconf_elem, - elems->ie_start, - elems->total_len, - elems->scratch_pos, - elems->scratch + elems->scratch_len - - elems->scratch_pos, - WLAN_EID_FRAGMENT); - if (ml_len < 0) - return; - - elems->ml_reconf = (const void *)elems->scratch_pos; - elems->ml_reconf_len = ml_len; - ml = elems->ml_reconf; - /* Directly parse the sub elements as the common information doesn't * hold any useful information. */ - for_each_mle_subelement(sub, (u8 *)ml, ml_len) { + for_each_mle_subelement(sub, (const u8 *)elems->ml_reconf, + elems->ml_reconf_len) { struct ieee80211_mle_per_sta_profile *prof = (void *)sub->data; u8 *pos = prof->variable; u16 control; @@ -5891,6 +5881,64 @@ static void ieee80211_ml_reconfiguration(struct ieee80211_sub_if_data *sdata, TU_TO_JIFFIES(delay)); } +static int ieee80211_ttlm_set_links(struct ieee80211_sub_if_data *sdata, + u16 active_links, u16 dormant_links, + u16 suspended_links) +{ + u64 changed = 0; + int ret; + + if (!active_links) { + ret = -EINVAL; + goto out; + } + + /* If there is an active negotiated TTLM, it should be discarded by + * the new negotiated/advertised TTLM. + */ + if (sdata->vif.neg_ttlm.valid) { + memset(&sdata->vif.neg_ttlm, 0, sizeof(sdata->vif.neg_ttlm)); + sdata->vif.suspended_links = 0; + changed = BSS_CHANGED_MLD_TTLM; + } + + if (sdata->vif.active_links != active_links) { + /* usable links are affected when active_links are changed, + * so notify the driver about the status change + */ + changed |= BSS_CHANGED_MLD_VALID_LINKS; + active_links &= sdata->vif.active_links; + if (!active_links) + active_links = + BIT(__ffs(sdata->vif.valid_links & + ~dormant_links)); + ret = ieee80211_set_active_links(&sdata->vif, active_links); + if (ret) { + sdata_info(sdata, "Failed to set TTLM active links\n"); + goto out; + } + } + + ret = ieee80211_vif_set_links(sdata, sdata->vif.valid_links, + dormant_links); + if (ret) { + sdata_info(sdata, "Failed to set TTLM dormant links\n"); + goto out; + } + + sdata->vif.suspended_links = suspended_links; + if (sdata->vif.suspended_links) + changed |= BSS_CHANGED_MLD_TTLM; + + ieee80211_vif_cfg_change_notify(sdata, changed); + +out: + if (ret) + ieee80211_disconnect(&sdata->vif, false); + + return ret; +} + static void ieee80211_tid_to_link_map_work(struct wiphy *wiphy, struct wiphy_work *work) { @@ -5898,30 +5946,19 @@ static void ieee80211_tid_to_link_map_work(struct wiphy *wiphy, struct ieee80211_sub_if_data *sdata = container_of(work, struct ieee80211_sub_if_data, u.mgd.ttlm_work.work); - int ret; new_active_links = sdata->u.mgd.ttlm_info.map & sdata->vif.valid_links; new_dormant_links = ~sdata->u.mgd.ttlm_info.map & sdata->vif.valid_links; - if (!new_active_links) { - ieee80211_disconnect(&sdata->vif, false); - return; - } ieee80211_vif_set_links(sdata, sdata->vif.valid_links, 0); - new_active_links = BIT(ffs(new_active_links) - 1); - ieee80211_set_active_links(&sdata->vif, new_active_links); - - ret = ieee80211_vif_set_links(sdata, sdata->vif.valid_links, - new_dormant_links); + if (ieee80211_ttlm_set_links(sdata, new_active_links, new_dormant_links, + 0)) + return; sdata->u.mgd.ttlm_info.active = true; sdata->u.mgd.ttlm_info.switch_time = 0; - - if (!ret) - ieee80211_vif_cfg_change_notify(sdata, - BSS_CHANGED_MLD_VALID_LINKS); } static u16 ieee80211_get_ttlm(u8 bm_size, u8 *data) @@ -6131,6 +6168,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_link_data *link, u8 *bssid, *variable = mgmt->u.beacon.variable; u8 deauth_buf[IEEE80211_DEAUTH_FRAME_LEN]; struct ieee80211_elems_parse_params parse_params = { + .mode = link->u.mgd.conn.mode, .link_id = -1, .from_ap = true, }; @@ -6214,7 +6252,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_link_data *link, } if (!ifmgd->associated || - !ieee80211_rx_our_beacon(bssid, link->u.mgd.bss)) + !ieee80211_rx_our_beacon(bssid, link->conf->bss)) return; bssid = link->u.mgd.bssid; @@ -6241,7 +6279,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_link_data *link, */ if (!ieee80211_is_s1g_beacon(hdr->frame_control)) ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4); - parse_params.bss = link->u.mgd.bss; + parse_params.bss = link->conf->bss; parse_params.filter = care_about_ies; parse_params.crc = ncrc; elems = ieee802_11_parse_elems_full(&parse_params); @@ -6303,9 +6341,6 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_link_data *link, } } - if (link->u.mgd.csa_waiting_bcn) - ieee80211_chswitch_post_beacon(link); - /* * Update beacon timing and dtim count on every beacon appearance. This * will allow the driver to use the most updated values. Do it before @@ -6379,21 +6414,14 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_link_data *link, goto free; } - if (WARN_ON(!link->conf->chandef.chan)) + if (WARN_ON(!link->conf->chanreq.oper.chan)) goto free; - sband = local->hw.wiphy->bands[link->conf->chandef.chan->band]; + sband = local->hw.wiphy->bands[link->conf->chanreq.oper.chan->band]; changed |= ieee80211_recalc_twt_req(sdata, sband, link, link_sta, elems); - if (ieee80211_config_bw(link, elems->ht_cap_elem, - elems->vht_cap_elem, elems->ht_operation, - elems->vht_operation, elems->he_operation, - elems->eht_operation, - elems->s1g_oper, bssid, &changed)) { - sdata_info(sdata, - "failed to follow AP %pM bandwidth change, disconnect\n", - bssid); + if (ieee80211_config_bw(link, elems, true, &changed)) { ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, WLAN_REASON_DEAUTH_LEAVING, true, deauth_buf); @@ -6415,21 +6443,6 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_link_data *link, elems->pwr_constr_elem, elems->cisco_dtpc_elem); - if (elems->eht_operation && - !(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_EHT)) { - if (!ieee80211_config_puncturing(link, elems->eht_operation, - &changed)) { - ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, - WLAN_REASON_DEAUTH_LEAVING, - true, deauth_buf); - ieee80211_report_disconnect(sdata, deauth_buf, - sizeof(deauth_buf), true, - WLAN_REASON_DEAUTH_LEAVING, - false); - goto free; - } - } - ieee80211_ml_reconfiguration(sdata, elems); ieee80211_process_adv_ttlm(sdata, elems, le64_to_cpu(mgmt->u.beacon.timestamp)); @@ -6439,6 +6452,376 @@ free: kfree(elems); } +static void ieee80211_apply_neg_ttlm(struct ieee80211_sub_if_data *sdata, + struct ieee80211_neg_ttlm neg_ttlm) +{ + u16 new_active_links, new_dormant_links, new_suspended_links, map = 0; + u8 i; + + for (i = 0; i < IEEE80211_TTLM_NUM_TIDS; i++) + map |= neg_ttlm.downlink[i] | neg_ttlm.uplink[i]; + + /* If there is an active TTLM, unset previously suspended links */ + if (sdata->vif.neg_ttlm.valid) + sdata->vif.dormant_links &= ~sdata->vif.suspended_links; + + /* exclude links that are already disabled by advertised TTLM */ + new_active_links = + map & sdata->vif.valid_links & ~sdata->vif.dormant_links; + new_suspended_links = + (~map & sdata->vif.valid_links) & ~sdata->vif.dormant_links; + new_dormant_links = sdata->vif.dormant_links | new_suspended_links; + if (ieee80211_ttlm_set_links(sdata, new_active_links, + new_dormant_links, new_suspended_links)) + return; + + sdata->vif.neg_ttlm = neg_ttlm; + sdata->vif.neg_ttlm.valid = true; +} + +static void ieee80211_neg_ttlm_timeout_work(struct wiphy *wiphy, + struct wiphy_work *work) +{ + struct ieee80211_sub_if_data *sdata = + container_of(work, struct ieee80211_sub_if_data, + u.mgd.neg_ttlm_timeout_work.work); + + sdata_info(sdata, + "No negotiated TTLM response from AP, disconnecting.\n"); + + __ieee80211_disconnect(sdata); +} + +static void +ieee80211_neg_ttlm_add_suggested_map(struct sk_buff *skb, + struct ieee80211_neg_ttlm *neg_ttlm) +{ + u8 i, direction[IEEE80211_TTLM_MAX_CNT]; + + if (memcmp(neg_ttlm->downlink, neg_ttlm->uplink, + sizeof(neg_ttlm->downlink))) { + direction[0] = IEEE80211_TTLM_DIRECTION_DOWN; + direction[1] = IEEE80211_TTLM_DIRECTION_UP; + } else { + direction[0] = IEEE80211_TTLM_DIRECTION_BOTH; + } + + for (i = 0; i < ARRAY_SIZE(direction); i++) { + u8 tid, len, map_ind = 0, *len_pos, *map_ind_pos, *pos; + __le16 map; + + len = sizeof(struct ieee80211_ttlm_elem) + 1 + 1; + + pos = skb_put(skb, len + 2); + *pos++ = WLAN_EID_EXTENSION; + len_pos = pos++; + *pos++ = WLAN_EID_EXT_TID_TO_LINK_MAPPING; + *pos++ = direction[i]; + map_ind_pos = pos++; + for (tid = 0; tid < IEEE80211_TTLM_NUM_TIDS; tid++) { + map = direction[i] == IEEE80211_TTLM_DIRECTION_UP ? + cpu_to_le16(neg_ttlm->uplink[tid]) : + cpu_to_le16(neg_ttlm->downlink[tid]); + if (!map) + continue; + + len += 2; + map_ind |= BIT(tid); + skb_put_data(skb, &map, sizeof(map)); + } + + *map_ind_pos = map_ind; + *len_pos = len; + + if (direction[i] == IEEE80211_TTLM_DIRECTION_BOTH) + break; + } +} + +static void +ieee80211_send_neg_ttlm_req(struct ieee80211_sub_if_data *sdata, + struct ieee80211_neg_ttlm *neg_ttlm, + u8 dialog_token) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_mgmt *mgmt; + struct sk_buff *skb; + int hdr_len = offsetofend(struct ieee80211_mgmt, u.action.u.ttlm_req); + int ttlm_max_len = 2 + 1 + sizeof(struct ieee80211_ttlm_elem) + 1 + + 2 * 2 * IEEE80211_TTLM_NUM_TIDS; + + skb = dev_alloc_skb(local->tx_headroom + hdr_len + ttlm_max_len); + if (!skb) + return; + + skb_reserve(skb, local->tx_headroom); + mgmt = skb_put_zero(skb, hdr_len); + mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | + IEEE80211_STYPE_ACTION); + memcpy(mgmt->da, sdata->vif.cfg.ap_addr, ETH_ALEN); + memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); + memcpy(mgmt->bssid, sdata->vif.cfg.ap_addr, ETH_ALEN); + + mgmt->u.action.category = WLAN_CATEGORY_PROTECTED_EHT; + mgmt->u.action.u.ttlm_req.action_code = + WLAN_PROTECTED_EHT_ACTION_TTLM_REQ; + mgmt->u.action.u.ttlm_req.dialog_token = dialog_token; + ieee80211_neg_ttlm_add_suggested_map(skb, neg_ttlm); + ieee80211_tx_skb(sdata, skb); +} + +int ieee80211_req_neg_ttlm(struct ieee80211_sub_if_data *sdata, + struct cfg80211_ttlm_params *params) +{ + struct ieee80211_neg_ttlm neg_ttlm = {}; + u8 i; + + if (!ieee80211_vif_is_mld(&sdata->vif) || + !(sdata->vif.cfg.mld_capa_op & + IEEE80211_MLD_CAP_OP_TID_TO_LINK_MAP_NEG_SUPP)) + return -EINVAL; + + for (i = 0; i < IEEE80211_TTLM_NUM_TIDS; i++) { + if ((params->dlink[i] & ~sdata->vif.valid_links) || + (params->ulink[i] & ~sdata->vif.valid_links)) + return -EINVAL; + + neg_ttlm.downlink[i] = params->dlink[i]; + neg_ttlm.uplink[i] = params->ulink[i]; + } + + if (drv_can_neg_ttlm(sdata->local, sdata, &neg_ttlm) != + NEG_TTLM_RES_ACCEPT) + return -EINVAL; + + ieee80211_apply_neg_ttlm(sdata, neg_ttlm); + sdata->u.mgd.dialog_token_alloc++; + ieee80211_send_neg_ttlm_req(sdata, &sdata->vif.neg_ttlm, + sdata->u.mgd.dialog_token_alloc); + wiphy_delayed_work_cancel(sdata->local->hw.wiphy, + &sdata->u.mgd.neg_ttlm_timeout_work); + wiphy_delayed_work_queue(sdata->local->hw.wiphy, + &sdata->u.mgd.neg_ttlm_timeout_work, + IEEE80211_NEG_TTLM_REQ_TIMEOUT); + return 0; +} + +static void +ieee80211_send_neg_ttlm_res(struct ieee80211_sub_if_data *sdata, + enum ieee80211_neg_ttlm_res ttlm_res, + u8 dialog_token, + struct ieee80211_neg_ttlm *neg_ttlm) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_mgmt *mgmt; + struct sk_buff *skb; + int hdr_len = offsetofend(struct ieee80211_mgmt, u.action.u.ttlm_res); + int ttlm_max_len = 2 + 1 + sizeof(struct ieee80211_ttlm_elem) + 1 + + 2 * 2 * IEEE80211_TTLM_NUM_TIDS; + + skb = dev_alloc_skb(local->tx_headroom + hdr_len + ttlm_max_len); + if (!skb) + return; + + skb_reserve(skb, local->tx_headroom); + mgmt = skb_put_zero(skb, hdr_len); + mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | + IEEE80211_STYPE_ACTION); + memcpy(mgmt->da, sdata->vif.cfg.ap_addr, ETH_ALEN); + memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); + memcpy(mgmt->bssid, sdata->vif.cfg.ap_addr, ETH_ALEN); + + mgmt->u.action.category = WLAN_CATEGORY_PROTECTED_EHT; + mgmt->u.action.u.ttlm_res.action_code = + WLAN_PROTECTED_EHT_ACTION_TTLM_RES; + mgmt->u.action.u.ttlm_res.dialog_token = dialog_token; + switch (ttlm_res) { + default: + WARN_ON(1); + fallthrough; + case NEG_TTLM_RES_REJECT: + mgmt->u.action.u.ttlm_res.status_code = + WLAN_STATUS_DENIED_TID_TO_LINK_MAPPING; + break; + case NEG_TTLM_RES_ACCEPT: + mgmt->u.action.u.ttlm_res.status_code = WLAN_STATUS_SUCCESS; + break; + case NEG_TTLM_RES_SUGGEST_PREFERRED: + mgmt->u.action.u.ttlm_res.status_code = + WLAN_STATUS_PREF_TID_TO_LINK_MAPPING_SUGGESTED; + ieee80211_neg_ttlm_add_suggested_map(skb, neg_ttlm); + break; + } + + ieee80211_tx_skb(sdata, skb); +} + +static int +ieee80211_parse_neg_ttlm(struct ieee80211_sub_if_data *sdata, + const struct ieee80211_ttlm_elem *ttlm, + struct ieee80211_neg_ttlm *neg_ttlm, + u8 *direction) +{ + u8 control, link_map_presence, map_size, tid; + u8 *pos; + + /* The element size was already validated in + * ieee80211_tid_to_link_map_size_ok() + */ + pos = (void *)ttlm->optional; + + control = ttlm->control; + + /* mapping switch time and expected duration fields are not expected + * in case of negotiated TTLM + */ + if (control & (IEEE80211_TTLM_CONTROL_SWITCH_TIME_PRESENT | + IEEE80211_TTLM_CONTROL_EXPECTED_DUR_PRESENT)) { + mlme_dbg(sdata, + "Invalid TTLM element in negotiated TTLM request\n"); + return -EINVAL; + } + + if (control & IEEE80211_TTLM_CONTROL_DEF_LINK_MAP) { + for (tid = 0; tid < IEEE80211_TTLM_NUM_TIDS; tid++) { + neg_ttlm->downlink[tid] = sdata->vif.valid_links; + neg_ttlm->uplink[tid] = sdata->vif.valid_links; + } + *direction = IEEE80211_TTLM_DIRECTION_BOTH; + return 0; + } + + *direction = u8_get_bits(control, IEEE80211_TTLM_CONTROL_DIRECTION); + if (*direction != IEEE80211_TTLM_DIRECTION_DOWN && + *direction != IEEE80211_TTLM_DIRECTION_UP && + *direction != IEEE80211_TTLM_DIRECTION_BOTH) + return -EINVAL; + + link_map_presence = *pos; + pos++; + + if (control & IEEE80211_TTLM_CONTROL_LINK_MAP_SIZE) + map_size = 1; + else + map_size = 2; + + for (tid = 0; tid < IEEE80211_TTLM_NUM_TIDS; tid++) { + u16 map; + + if (link_map_presence & BIT(tid)) { + map = ieee80211_get_ttlm(map_size, pos); + if (!map) { + mlme_dbg(sdata, + "No active links for TID %d", tid); + return -EINVAL; + } + } else { + map = 0; + } + + switch (*direction) { + case IEEE80211_TTLM_DIRECTION_BOTH: + neg_ttlm->downlink[tid] = map; + neg_ttlm->uplink[tid] = map; + break; + case IEEE80211_TTLM_DIRECTION_DOWN: + neg_ttlm->downlink[tid] = map; + break; + case IEEE80211_TTLM_DIRECTION_UP: + neg_ttlm->uplink[tid] = map; + break; + default: + return -EINVAL; + } + pos += map_size; + } + return 0; +} + +void ieee80211_process_neg_ttlm_req(struct ieee80211_sub_if_data *sdata, + struct ieee80211_mgmt *mgmt, size_t len) +{ + u8 dialog_token, direction[IEEE80211_TTLM_MAX_CNT] = {}, i; + size_t ies_len; + enum ieee80211_neg_ttlm_res ttlm_res = NEG_TTLM_RES_ACCEPT; + struct ieee802_11_elems *elems = NULL; + struct ieee80211_neg_ttlm neg_ttlm = {}; + + BUILD_BUG_ON(ARRAY_SIZE(direction) != ARRAY_SIZE(elems->ttlm)); + + if (!ieee80211_vif_is_mld(&sdata->vif)) + return; + + dialog_token = mgmt->u.action.u.ttlm_req.dialog_token; + ies_len = len - offsetof(struct ieee80211_mgmt, + u.action.u.ttlm_req.variable); + elems = ieee802_11_parse_elems(mgmt->u.action.u.ttlm_req.variable, + ies_len, true, NULL); + if (!elems) { + ttlm_res = NEG_TTLM_RES_REJECT; + goto out; + } + + for (i = 0; i < elems->ttlm_num; i++) { + if (ieee80211_parse_neg_ttlm(sdata, elems->ttlm[i], + &neg_ttlm, &direction[i]) || + (direction[i] == IEEE80211_TTLM_DIRECTION_BOTH && + elems->ttlm_num != 1)) { + ttlm_res = NEG_TTLM_RES_REJECT; + goto out; + } + } + + if (!elems->ttlm_num || + (elems->ttlm_num == 2 && direction[0] == direction[1])) { + ttlm_res = NEG_TTLM_RES_REJECT; + goto out; + } + + for (i = 0; i < IEEE80211_TTLM_NUM_TIDS; i++) { + if ((neg_ttlm.downlink[i] && + (neg_ttlm.downlink[i] & ~sdata->vif.valid_links)) || + (neg_ttlm.uplink[i] && + (neg_ttlm.uplink[i] & ~sdata->vif.valid_links))) { + ttlm_res = NEG_TTLM_RES_REJECT; + goto out; + } + } + + ttlm_res = drv_can_neg_ttlm(sdata->local, sdata, &neg_ttlm); + + if (ttlm_res != NEG_TTLM_RES_ACCEPT) + goto out; + + ieee80211_apply_neg_ttlm(sdata, neg_ttlm); +out: + kfree(elems); + ieee80211_send_neg_ttlm_res(sdata, ttlm_res, dialog_token, &neg_ttlm); +} + +void ieee80211_process_neg_ttlm_res(struct ieee80211_sub_if_data *sdata, + struct ieee80211_mgmt *mgmt, size_t len) +{ + if (!ieee80211_vif_is_mld(&sdata->vif) || + mgmt->u.action.u.ttlm_req.dialog_token != + sdata->u.mgd.dialog_token_alloc) + return; + + wiphy_delayed_work_cancel(sdata->local->hw.wiphy, + &sdata->u.mgd.neg_ttlm_timeout_work); + + /* MLD station sends a TID to link mapping request, mainly to handle + * BTM (BSS transition management) request, in which case it needs to + * restrict the active links set. + * In this case it's not expected that the MLD AP will reject the + * negotiated TTLM request. + * This can be better implemented in the future, to handle request + * rejections. + */ + if (mgmt->u.action.u.ttlm_res.status_code != WLAN_STATUS_SUCCESS) + __ieee80211_disconnect(sdata); +} + void ieee80211_sta_rx_queued_ext(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb) { @@ -7068,6 +7451,8 @@ void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata) ieee80211_sta_handle_tspec_ac_params_wk); wiphy_delayed_work_init(&ifmgd->ttlm_work, ieee80211_tid_to_link_map_work); + wiphy_delayed_work_init(&ifmgd->neg_ttlm_timeout_work, + ieee80211_neg_ttlm_timeout_work); ifmgd->flags = 0; ifmgd->powersave = sdata->wdev.ps; @@ -7077,6 +7462,7 @@ void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata) spin_lock_init(&ifmgd->teardown_lock); ifmgd->teardown_skb = NULL; ifmgd->orig_teardown_skb = NULL; + ifmgd->mcast_seq_last = IEEE80211_SN_MODULO; } static void ieee80211_recalc_smps_work(struct wiphy *wiphy, @@ -7096,7 +7482,6 @@ void ieee80211_mgd_setup_link(struct ieee80211_link_data *link) unsigned int link_id = link->link_id; link->u.mgd.p2p_noa_index = -1; - link->u.mgd.conn_flags = 0; link->conf->bssid = link->u.mgd.bssid; link->smps_mode = IEEE80211_SMPS_OFF; @@ -7136,6 +7521,7 @@ void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local) static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, struct cfg80211_bss *cbss, s8 link_id, const u8 *ap_mld_addr, bool assoc, + struct ieee80211_conn_settings *conn, bool override) { struct ieee80211_local *local = sdata->local; @@ -7267,13 +7653,22 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, } if (new_sta || override) { - err = ieee80211_prep_channel(sdata, link, cbss, mlo, - &link->u.mgd.conn_flags); + /* + * Only set this if we're also going to calculate the AP + * settings etc., otherwise this was set before in a + * previous call. Note override is set to %true in assoc + * if the settings were changed. + */ + link->u.mgd.conn = *conn; + err = ieee80211_prep_channel(sdata, link, link->link_id, cbss, + mlo, &link->u.mgd.conn); if (err) { if (new_sta) sta_info_free(local, new_sta); goto out_err; } + /* pass out for use in assoc */ + *conn = link->u.mgd.conn; } if (new_sta) { @@ -7389,10 +7784,13 @@ int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata, struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_mgd_auth_data *auth_data; + struct ieee80211_conn_settings conn; struct ieee80211_link_data *link; + struct ieee80211_supported_band *sband; + struct ieee80211_bss *bss; u16 auth_alg; int err; - bool cont_auth; + bool cont_auth, wmm_used; lockdep_assert_wiphy(sdata->local->hw.wiphy); @@ -7523,8 +7921,17 @@ int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata, /* needed for transmitting the auth frame(s) properly */ memcpy(sdata->vif.cfg.ap_addr, auth_data->ap_addr, ETH_ALEN); + bss = (void *)req->bss->priv; + wmm_used = bss->wmm_used && (local->hw.queues >= IEEE80211_NUM_ACS); + + sband = local->hw.wiphy->bands[req->bss->channel->band]; + + ieee80211_determine_our_sta_mode_auth(sdata, sband, req, wmm_used, + &conn); + err = ieee80211_prep_connection(sdata, req->bss, req->link_id, - req->ap_mld_addr, cont_auth, false); + req->ap_mld_addr, cont_auth, + &conn, false); if (err) goto err_clear; @@ -7563,38 +7970,33 @@ int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata, return err; } -static ieee80211_conn_flags_t +static void ieee80211_setup_assoc_link(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgd_assoc_data *assoc_data, struct cfg80211_assoc_request *req, - ieee80211_conn_flags_t conn_flags, + struct ieee80211_conn_settings *conn, unsigned int link_id) { struct ieee80211_local *local = sdata->local; const struct cfg80211_bss_ies *bss_ies; struct ieee80211_supported_band *sband; - const struct element *ht_elem, *vht_elem; struct ieee80211_link_data *link; struct cfg80211_bss *cbss; struct ieee80211_bss *bss; - bool is_5ghz, is_6ghz; cbss = assoc_data->link[link_id].bss; if (WARN_ON(!cbss)) - return 0; + return; bss = (void *)cbss->priv; sband = local->hw.wiphy->bands[cbss->channel->band]; if (WARN_ON(!sband)) - return 0; + return; link = sdata_dereference(sdata->link[link_id], sdata); if (WARN_ON(!link)) - return 0; - - is_5ghz = cbss->channel->band == NL80211_BAND_5GHZ; - is_6ghz = cbss->channel->band == NL80211_BAND_6GHZ; + return; /* for MLO connections assume advertising all rates is OK */ if (!req->ap_mld_addr) { @@ -7611,40 +8013,18 @@ ieee80211_setup_assoc_link(struct ieee80211_sub_if_data *sdata, assoc_data->ie_pos += req->links[link_id].elems_len; } - rcu_read_lock(); - ht_elem = ieee80211_bss_get_elem(cbss, WLAN_EID_HT_OPERATION); - if (ht_elem && ht_elem->datalen >= sizeof(struct ieee80211_ht_operation)) - assoc_data->link[link_id].ap_ht_param = - ((struct ieee80211_ht_operation *)(ht_elem->data))->ht_param; - else if (!is_6ghz) - conn_flags |= IEEE80211_CONN_DISABLE_HT; - vht_elem = ieee80211_bss_get_elem(cbss, WLAN_EID_VHT_CAPABILITY); - if (vht_elem && vht_elem->datalen >= sizeof(struct ieee80211_vht_cap)) { - memcpy(&assoc_data->link[link_id].ap_vht_cap, vht_elem->data, - sizeof(struct ieee80211_vht_cap)); - } else if (is_5ghz) { - link_info(link, - "VHT capa missing/short, disabling VHT/HE/EHT\n"); - conn_flags |= IEEE80211_CONN_DISABLE_VHT | - IEEE80211_CONN_DISABLE_HE | - IEEE80211_CONN_DISABLE_EHT; - } - rcu_read_unlock(); - link->u.mgd.beacon_crc_valid = false; link->u.mgd.dtim_period = 0; link->u.mgd.have_beacon = false; - /* override HT/VHT configuration only if the AP and we support it */ - if (!(conn_flags & IEEE80211_CONN_DISABLE_HT)) { + /* override HT configuration only if the AP and we support it */ + if (conn->mode >= IEEE80211_CONN_MODE_HT) { struct ieee80211_sta_ht_cap sta_ht_cap; memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap)); ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap); } - link->conf->eht_puncturing = 0; - rcu_read_lock(); bss_ies = rcu_dereference(cbss->beacon_ies); if (bss_ies) { @@ -7665,7 +8045,6 @@ ieee80211_setup_assoc_link(struct ieee80211_sub_if_data *sdata, } if (bss_ies) { - const struct ieee80211_eht_operation *eht_oper; const struct element *elem; elem = cfg80211_find_ext_elem(WLAN_EID_EXT_MULTIPLE_BSSID_CONFIGURATION, @@ -7682,32 +8061,6 @@ ieee80211_setup_assoc_link(struct ieee80211_sub_if_data *sdata, link->conf->ema_ap = true; else link->conf->ema_ap = false; - - elem = cfg80211_find_ext_elem(WLAN_EID_EXT_EHT_OPERATION, - bss_ies->data, bss_ies->len); - eht_oper = (const void *)(elem->data + 1); - - if (elem && - ieee80211_eht_oper_size_ok((const void *)(elem->data + 1), - elem->datalen - 1) && - (eht_oper->params & IEEE80211_EHT_OPER_INFO_PRESENT) && - (eht_oper->params & IEEE80211_EHT_OPER_DISABLED_SUBCHANNEL_BITMAP_PRESENT)) { - const struct ieee80211_eht_operation_info *info = - (void *)eht_oper->optional; - const u8 *disable_subchannel_bitmap = info->optional; - u16 bitmap; - - bitmap = get_unaligned_le16(disable_subchannel_bitmap); - if (cfg80211_valid_disable_subchannel_bitmap(&bitmap, - &link->conf->chandef) && - !(bitmap && ieee80211_hw_check(&local->hw, DISALLOW_PUNCTURING))) - ieee80211_handle_puncturing_bitmap(link, - eht_oper, - bitmap, - NULL); - else - conn_flags |= IEEE80211_CONN_DISABLE_EHT; - } } rcu_read_unlock(); @@ -7734,8 +8087,67 @@ ieee80211_setup_assoc_link(struct ieee80211_sub_if_data *sdata, } else { link->smps_mode = link->u.mgd.req_smps; } +} + +static int +ieee80211_mgd_get_ap_ht_vht_capa(struct ieee80211_sub_if_data *sdata, + struct ieee80211_mgd_assoc_data *assoc_data, + int link_id) +{ + struct cfg80211_bss *cbss = assoc_data->link[link_id].bss; + enum nl80211_band band = cbss->channel->band; + struct ieee80211_supported_band *sband; + const struct element *elem; + int err; + + /* neither HT nor VHT elements used on 6 GHz */ + if (band == NL80211_BAND_6GHZ) + return 0; - return conn_flags; + if (assoc_data->link[link_id].conn.mode < IEEE80211_CONN_MODE_HT) + return 0; + + rcu_read_lock(); + elem = ieee80211_bss_get_elem(cbss, WLAN_EID_HT_OPERATION); + if (!elem || elem->datalen < sizeof(struct ieee80211_ht_operation)) { + mlme_link_id_dbg(sdata, link_id, "no HT operation on BSS %pM\n", + cbss->bssid); + err = -EINVAL; + goto out_rcu; + } + assoc_data->link[link_id].ap_ht_param = + ((struct ieee80211_ht_operation *)(elem->data))->ht_param; + rcu_read_unlock(); + + if (assoc_data->link[link_id].conn.mode < IEEE80211_CONN_MODE_VHT) + return 0; + + /* some drivers want to support VHT on 2.4 GHz even */ + sband = sdata->local->hw.wiphy->bands[band]; + if (!sband->vht_cap.vht_supported) + return 0; + + rcu_read_lock(); + elem = ieee80211_bss_get_elem(cbss, WLAN_EID_VHT_CAPABILITY); + /* but even then accept it not being present on the AP */ + if (!elem && band == NL80211_BAND_2GHZ) { + err = 0; + goto out_rcu; + } + if (!elem || elem->datalen < sizeof(struct ieee80211_vht_cap)) { + mlme_link_id_dbg(sdata, link_id, "no VHT capa on BSS %pM\n", + cbss->bssid); + err = -EINVAL; + goto out_rcu; + } + memcpy(&assoc_data->link[link_id].ap_vht_cap, elem->data, + sizeof(struct ieee80211_vht_cap)); + rcu_read_unlock(); + + return 0; +out_rcu: + rcu_read_unlock(); + return err; } int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, @@ -7747,11 +8159,10 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgd_assoc_data *assoc_data; const struct element *ssid_elem; struct ieee80211_vif_cfg *vif_cfg = &sdata->vif.cfg; - ieee80211_conn_flags_t conn_flags = 0; struct ieee80211_link_data *link; struct cfg80211_bss *cbss; - struct ieee80211_bss *bss; - bool override; + bool override, uapsd_supported; + bool match_auth; int i, err; size_t size = sizeof(*assoc_data) + req->ie_len; @@ -7770,44 +8181,26 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, if (ieee80211_mgd_csa_in_process(sdata, cbss)) { sdata_info(sdata, "AP is in CSA process, reject assoc\n"); - kfree(assoc_data); - return -EINVAL; + err = -EINVAL; + goto err_free; } rcu_read_lock(); ssid_elem = ieee80211_bss_get_elem(cbss, WLAN_EID_SSID); if (!ssid_elem || ssid_elem->datalen > sizeof(assoc_data->ssid)) { rcu_read_unlock(); - kfree(assoc_data); - return -EINVAL; + err = -EINVAL; + goto err_free; } memcpy(assoc_data->ssid, ssid_elem->data, ssid_elem->datalen); assoc_data->ssid_len = ssid_elem->datalen; - memcpy(vif_cfg->ssid, assoc_data->ssid, assoc_data->ssid_len); - vif_cfg->ssid_len = assoc_data->ssid_len; rcu_read_unlock(); - if (req->ap_mld_addr) { - for (i = 0; i < IEEE80211_MLD_MAX_NUM_LINKS; i++) { - if (!req->links[i].bss) - continue; - link = sdata_dereference(sdata->link[i], sdata); - if (link) - ether_addr_copy(assoc_data->link[i].addr, - link->conf->addr); - else - eth_random_addr(assoc_data->link[i].addr); - } - } else { - memcpy(assoc_data->link[0].addr, sdata->vif.addr, ETH_ALEN); - } - - assoc_data->s1g = cbss->channel->band == NL80211_BAND_S1GHZ; - - memcpy(assoc_data->ap_addr, - req->ap_mld_addr ?: req->bss->bssid, - ETH_ALEN); + if (req->ap_mld_addr) + memcpy(assoc_data->ap_addr, req->ap_mld_addr, ETH_ALEN); + else + memcpy(assoc_data->ap_addr, cbss->bssid, ETH_ALEN); if (ifmgd->associated) { u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; @@ -7825,98 +8218,146 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, false); } - if (ifmgd->auth_data && !ifmgd->auth_data->done) { - err = -EBUSY; - goto err_free; - } + memcpy(&ifmgd->ht_capa, &req->ht_capa, sizeof(ifmgd->ht_capa)); + memcpy(&ifmgd->ht_capa_mask, &req->ht_capa_mask, + sizeof(ifmgd->ht_capa_mask)); - if (ifmgd->assoc_data) { - err = -EBUSY; - goto err_free; - } + memcpy(&ifmgd->vht_capa, &req->vht_capa, sizeof(ifmgd->vht_capa)); + memcpy(&ifmgd->vht_capa_mask, &req->vht_capa_mask, + sizeof(ifmgd->vht_capa_mask)); - if (ifmgd->auth_data) { - bool match; + memcpy(&ifmgd->s1g_capa, &req->s1g_capa, sizeof(ifmgd->s1g_capa)); + memcpy(&ifmgd->s1g_capa_mask, &req->s1g_capa_mask, + sizeof(ifmgd->s1g_capa_mask)); - /* keep sta info, bssid if matching */ - match = ether_addr_equal(ifmgd->auth_data->ap_addr, - assoc_data->ap_addr) && - ifmgd->auth_data->link_id == req->link_id; + /* keep some setup (AP STA, channel, ...) if matching */ + match_auth = ifmgd->auth_data && + ether_addr_equal(ifmgd->auth_data->ap_addr, + assoc_data->ap_addr) && + ifmgd->auth_data->link_id == req->link_id; - /* Cleanup is delayed if auth_data matches */ - if (!match) - ieee80211_destroy_auth_data(sdata, false); - } + if (req->ap_mld_addr) { + uapsd_supported = true; - /* prepare assoc data */ + for (i = 0; i < IEEE80211_MLD_MAX_NUM_LINKS; i++) { + struct ieee80211_supported_band *sband; + struct cfg80211_bss *link_cbss = req->links[i].bss; + struct ieee80211_bss *bss; - bss = (void *)cbss->priv; - assoc_data->wmm = bss->wmm_used && - (local->hw.queues >= IEEE80211_NUM_ACS); + if (!link_cbss) + continue; - /* - * IEEE802.11n does not allow TKIP/WEP as pairwise ciphers in HT mode. - * We still associate in non-HT mode (11a/b/g) if any one of these - * ciphers is configured as pairwise. - * We can set this to true for non-11n hardware, that'll be checked - * separately along with the peer capabilities. - */ - for (i = 0; i < req->crypto.n_ciphers_pairwise; i++) { - if (req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP40 || - req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_TKIP || - req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP104) { - conn_flags |= IEEE80211_CONN_DISABLE_HT; - conn_flags |= IEEE80211_CONN_DISABLE_VHT; - conn_flags |= IEEE80211_CONN_DISABLE_HE; - conn_flags |= IEEE80211_CONN_DISABLE_EHT; - netdev_info(sdata->dev, - "disabling HT/VHT/HE due to WEP/TKIP use\n"); + bss = (void *)link_cbss->priv; + + if (!bss->wmm_used) { + err = -EINVAL; + goto err_free; + } + + if (req->flags & (ASSOC_REQ_DISABLE_HT | + ASSOC_REQ_DISABLE_VHT | + ASSOC_REQ_DISABLE_HE | + ASSOC_REQ_DISABLE_EHT)) { + err = -EINVAL; + goto err_free; + } + + if (link_cbss->channel->band == NL80211_BAND_S1GHZ) { + err = -EINVAL; + goto err_free; + } + + link = sdata_dereference(sdata->link[i], sdata); + if (link) + ether_addr_copy(assoc_data->link[i].addr, + link->conf->addr); + else + eth_random_addr(assoc_data->link[i].addr); + sband = local->hw.wiphy->bands[link_cbss->channel->band]; + + if (match_auth && i == assoc_link_id && link) + assoc_data->link[i].conn = link->u.mgd.conn; + else + assoc_data->link[i].conn = + ieee80211_conn_settings_unlimited; + ieee80211_determine_our_sta_mode_assoc(sdata, sband, + req, true, i, + &assoc_data->link[i].conn); + assoc_data->link[i].bss = link_cbss; + assoc_data->link[i].disabled = req->links[i].disabled; + + if (!bss->uapsd_supported) + uapsd_supported = false; + + if (assoc_data->link[i].conn.mode < IEEE80211_CONN_MODE_EHT) { + err = -EINVAL; + req->links[i].error = err; + goto err_free; + } + + err = ieee80211_mgd_get_ap_ht_vht_capa(sdata, + assoc_data, i); + if (err) { + err = -EINVAL; + req->links[i].error = err; + goto err_free; + } } - } - /* also disable HT/VHT/HE/EHT if the AP doesn't use WMM */ - if (!bss->wmm_used) { - conn_flags |= IEEE80211_CONN_DISABLE_HT; - conn_flags |= IEEE80211_CONN_DISABLE_VHT; - conn_flags |= IEEE80211_CONN_DISABLE_HE; - conn_flags |= IEEE80211_CONN_DISABLE_EHT; - netdev_info(sdata->dev, - "disabling HT/VHT/HE as WMM/QoS is not supported by the AP\n"); - } + assoc_data->wmm = true; + } else { + struct ieee80211_supported_band *sband; + struct ieee80211_bss *bss = (void *)cbss->priv; - if (req->flags & ASSOC_REQ_DISABLE_HT) { - mlme_dbg(sdata, "HT disabled by flag, disabling HT/VHT/HE\n"); - conn_flags |= IEEE80211_CONN_DISABLE_HT; - conn_flags |= IEEE80211_CONN_DISABLE_VHT; - conn_flags |= IEEE80211_CONN_DISABLE_HE; - conn_flags |= IEEE80211_CONN_DISABLE_EHT; - } + memcpy(assoc_data->link[0].addr, sdata->vif.addr, ETH_ALEN); + assoc_data->s1g = cbss->channel->band == NL80211_BAND_S1GHZ; - if (req->flags & ASSOC_REQ_DISABLE_VHT) { - mlme_dbg(sdata, "VHT disabled by flag, disabling VHT\n"); - conn_flags |= IEEE80211_CONN_DISABLE_VHT; - } + assoc_data->wmm = bss->wmm_used && + (local->hw.queues >= IEEE80211_NUM_ACS); + + if (cbss->channel->band == NL80211_BAND_6GHZ && + req->flags & (ASSOC_REQ_DISABLE_HT | + ASSOC_REQ_DISABLE_VHT | + ASSOC_REQ_DISABLE_HE)) { + err = -EINVAL; + goto err_free; + } - if (req->flags & ASSOC_REQ_DISABLE_HE) { - mlme_dbg(sdata, "HE disabled by flag, disabling HE/EHT\n"); - conn_flags |= IEEE80211_CONN_DISABLE_HE; - conn_flags |= IEEE80211_CONN_DISABLE_EHT; + sband = local->hw.wiphy->bands[cbss->channel->band]; + + assoc_data->link[0].bss = cbss; + + if (match_auth) + assoc_data->link[0].conn = sdata->deflink.u.mgd.conn; + else + assoc_data->link[0].conn = + ieee80211_conn_settings_unlimited; + ieee80211_determine_our_sta_mode_assoc(sdata, sband, req, + assoc_data->wmm, 0, + &assoc_data->link[0].conn); + + uapsd_supported = bss->uapsd_supported; + + err = ieee80211_mgd_get_ap_ht_vht_capa(sdata, assoc_data, 0); + if (err) + goto err_free; } - if (req->flags & ASSOC_REQ_DISABLE_EHT) - conn_flags |= IEEE80211_CONN_DISABLE_EHT; + assoc_data->spp_amsdu = req->flags & ASSOC_REQ_SPP_AMSDU; - memcpy(&ifmgd->ht_capa, &req->ht_capa, sizeof(ifmgd->ht_capa)); - memcpy(&ifmgd->ht_capa_mask, &req->ht_capa_mask, - sizeof(ifmgd->ht_capa_mask)); + if (ifmgd->auth_data && !ifmgd->auth_data->done) { + err = -EBUSY; + goto err_free; + } - memcpy(&ifmgd->vht_capa, &req->vht_capa, sizeof(ifmgd->vht_capa)); - memcpy(&ifmgd->vht_capa_mask, &req->vht_capa_mask, - sizeof(ifmgd->vht_capa_mask)); + if (ifmgd->assoc_data) { + err = -EBUSY; + goto err_free; + } - memcpy(&ifmgd->s1g_capa, &req->s1g_capa, sizeof(ifmgd->s1g_capa)); - memcpy(&ifmgd->s1g_capa_mask, &req->s1g_capa_mask, - sizeof(ifmgd->s1g_capa_mask)); + /* Cleanup is delayed if auth_data matches */ + if (ifmgd->auth_data && !match_auth) + ieee80211_destroy_auth_data(sdata, false); if (req->ie && req->ie_len) { memcpy(assoc_data->ie, req->ie, req->ie_len); @@ -7948,19 +8389,10 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, assoc_data->assoc_link_id = assoc_link_id; if (req->ap_mld_addr) { - for (i = 0; i < ARRAY_SIZE(assoc_data->link); i++) { - assoc_data->link[i].conn_flags = conn_flags; - assoc_data->link[i].bss = req->links[i].bss; - assoc_data->link[i].disabled = req->links[i].disabled; - } - /* if there was no authentication, set up the link */ err = ieee80211_vif_set_links(sdata, BIT(assoc_link_id), 0); if (err) goto err_clear; - } else { - assoc_data->link[0].conn_flags = conn_flags; - assoc_data->link[0].bss = cbss; } link = sdata_dereference(sdata->link[assoc_link_id], sdata); @@ -7969,19 +8401,21 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, goto err_clear; } - /* keep old conn_flags from ieee80211_prep_channel() from auth */ - conn_flags |= link->u.mgd.conn_flags; - conn_flags |= ieee80211_setup_assoc_link(sdata, assoc_data, req, - conn_flags, assoc_link_id); - override = link->u.mgd.conn_flags != conn_flags; - link->u.mgd.conn_flags |= conn_flags; + override = link->u.mgd.conn.mode != + assoc_data->link[assoc_link_id].conn.mode || + link->u.mgd.conn.bw_limit != + assoc_data->link[assoc_link_id].conn.bw_limit; + link->u.mgd.conn = assoc_data->link[assoc_link_id].conn; + + ieee80211_setup_assoc_link(sdata, assoc_data, req, &link->u.mgd.conn, + assoc_link_id); if (WARN((sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD) && ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK), "U-APSD not supported with HW_PS_NULLFUNC_STACK\n")) sdata->vif.driver_flags &= ~IEEE80211_VIF_SUPPORTS_UAPSD; - if (bss->wmm_used && bss->uapsd_supported && + if (assoc_data->wmm && uapsd_supported && (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD)) { assoc_data->uapsd = true; ifmgd->flags |= IEEE80211_STA_UAPSD_ENABLED; @@ -8025,27 +8459,29 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, continue; if (i == assoc_data->assoc_link_id) continue; - /* only calculate the flags, hence link == NULL */ - err = ieee80211_prep_channel(sdata, NULL, + /* only calculate the mode, hence link == NULL */ + err = ieee80211_prep_channel(sdata, NULL, i, assoc_data->link[i].bss, true, - &assoc_data->link[i].conn_flags); + &assoc_data->link[i].conn); if (err) { req->links[i].error = err; goto err_clear; } } + memcpy(vif_cfg->ssid, assoc_data->ssid, assoc_data->ssid_len); + vif_cfg->ssid_len = assoc_data->ssid_len; + /* needed for transmitting the assoc frames properly */ memcpy(sdata->vif.cfg.ap_addr, assoc_data->ap_addr, ETH_ALEN); err = ieee80211_prep_connection(sdata, cbss, req->link_id, - req->ap_mld_addr, true, override); + req->ap_mld_addr, true, + &assoc_data->link[assoc_link_id].conn, + override); if (err) goto err_clear; - assoc_data->link[assoc_data->assoc_link_id].conn_flags = - link->u.mgd.conn_flags; - if (ieee80211_hw_check(&sdata->local->hw, NEED_DTIM_BEFORE_ASSOC)) { const struct cfg80211_bss_ies *beacon_ies; @@ -8209,6 +8645,8 @@ void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata) wiphy_delayed_work_cancel(sdata->local->hw.wiphy, &ifmgd->ml_reconf_work); wiphy_delayed_work_cancel(sdata->local->hw.wiphy, &ifmgd->ttlm_work); + wiphy_delayed_work_cancel(sdata->local->hw.wiphy, + &ifmgd->neg_ttlm_timeout_work); if (ifmgd->assoc_data) ieee80211_destroy_assoc_data(sdata, ASSOC_TIMEOUT); |