summaryrefslogtreecommitdiffstats
path: root/net/mac80211/scan.c
diff options
context:
space:
mode:
Diffstat (limited to 'net/mac80211/scan.c')
-rw-r--r--net/mac80211/scan.c64
1 files changed, 41 insertions, 23 deletions
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index d613a9e3ae..3da1c5c450 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -257,7 +257,6 @@ static bool ieee80211_scan_accept_presp(struct ieee80211_sub_if_data *sdata,
void ieee80211_scan_rx(struct ieee80211_local *local, struct sk_buff *skb)
{
struct ieee80211_rx_status *rx_status = IEEE80211_SKB_RXCB(skb);
- struct ieee80211_sub_if_data *sdata1, *sdata2;
struct ieee80211_mgmt *mgmt = (void *)skb->data;
struct ieee80211_bss *bss;
struct ieee80211_channel *channel;
@@ -281,12 +280,6 @@ void ieee80211_scan_rx(struct ieee80211_local *local, struct sk_buff *skb)
if (skb->len < min_hdr_len)
return;
- sdata1 = rcu_dereference(local->scan_sdata);
- sdata2 = rcu_dereference(local->sched_scan_sdata);
-
- if (likely(!sdata1 && !sdata2))
- return;
-
if (test_and_clear_bit(SCAN_BEACON_WAIT, &local->scanning)) {
/*
* we were passive scanning because of radar/no-IR, but
@@ -304,10 +297,17 @@ void ieee80211_scan_rx(struct ieee80211_local *local, struct sk_buff *skb)
return;
if (ieee80211_is_probe_resp(mgmt->frame_control)) {
+ struct ieee80211_sub_if_data *sdata1, *sdata2;
struct cfg80211_scan_request *scan_req;
struct cfg80211_sched_scan_request *sched_scan_req;
u32 scan_req_flags = 0, sched_scan_req_flags = 0;
+ sdata1 = rcu_dereference(local->scan_sdata);
+ sdata2 = rcu_dereference(local->sched_scan_sdata);
+
+ if (likely(!sdata1 && !sdata2))
+ return;
+
scan_req = rcu_dereference(local->scan_req);
sched_scan_req = rcu_dereference(local->sched_scan_req);
@@ -327,8 +327,16 @@ void ieee80211_scan_rx(struct ieee80211_local *local, struct sk_buff *skb)
sched_scan_req_flags,
mgmt->da))
return;
+ } else {
+ /* Beacons are expected only with broadcast address */
+ if (!is_broadcast_ether_addr(mgmt->da))
+ return;
}
+ /* Do not update the BSS table in case of only monitor interfaces */
+ if (local->open_count == local->monitors)
+ return;
+
bss = ieee80211_bss_info_update(local, rx_status,
mgmt, skb->len,
channel);
@@ -400,6 +408,8 @@ static bool ieee80211_prep_hw_scan(struct ieee80211_sub_if_data *sdata)
req->ie, req->ie_len,
bands_used, req->rates, &chandef,
flags);
+ if (ielen < 0)
+ return false;
local->hw_scan_req->req.ie_len = ielen;
local->hw_scan_req->req.no_cck = req->no_cck;
ether_addr_copy(local->hw_scan_req->req.mac_addr, req->mac_addr);
@@ -476,7 +486,7 @@ static void __ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted)
}
/* Set power back to normal operating levels. */
- ieee80211_hw_config(local, 0);
+ ieee80211_hw_conf_chan(local);
if (!hw_scan && was_scanning) {
ieee80211_configure_filter(local);
@@ -523,7 +533,7 @@ static int ieee80211_start_sw_scan(struct ieee80211_local *local,
struct ieee80211_sub_if_data *sdata)
{
/* Software scan is not supported in multi-channel cases */
- if (local->use_chanctx)
+ if (!local->emulate_chanctx)
return -EOPNOTSUPP;
/*
@@ -553,7 +563,7 @@ static int ieee80211_start_sw_scan(struct ieee80211_local *local,
ieee80211_configure_filter(local);
/* We need to set power level at maximum rate for scanning. */
- ieee80211_hw_config(local, 0);
+ ieee80211_hw_conf_chan(local);
wiphy_delayed_work_queue(local->hw.wiphy, &local->scan_work, 0);
@@ -678,7 +688,10 @@ static void ieee80211_scan_state_send_probe(struct ieee80211_local *local,
* After sending probe requests, wait for probe responses
* on the channel.
*/
- *next_delay = IEEE80211_CHANNEL_TIME;
+ *next_delay = msecs_to_jiffies(scan_req->duration) >
+ IEEE80211_PROBE_DELAY + IEEE80211_CHANNEL_TIME ?
+ msecs_to_jiffies(scan_req->duration) - IEEE80211_PROBE_DELAY :
+ IEEE80211_CHANNEL_TIME;
local->next_scan_state = SCAN_DECISION;
}
@@ -780,7 +793,7 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata,
if (hw_scan) {
__set_bit(SCAN_HW_SCANNING, &local->scanning);
} else if ((req->n_channels == 1) &&
- (req->channels[0] == local->_oper_chandef.chan)) {
+ (req->channels[0] == local->hw.conf.chandef.chan)) {
/*
* If we are scanning only on the operating channel
* then we do not need to stop normal activities
@@ -798,7 +811,7 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata,
ieee80211_configure_filter(local); /* accept probe-responses */
/* We need to ensure power level is at max for scanning. */
- ieee80211_hw_config(local, 0);
+ ieee80211_hw_conf_chan(local);
if ((req->channels[0]->flags & (IEEE80211_CHAN_NO_IR |
IEEE80211_CHAN_RADAR)) ||
@@ -963,13 +976,13 @@ static void ieee80211_scan_state_set_channel(struct ieee80211_local *local,
/* If scanning on oper channel, use whatever channel-type
* is currently in use.
*/
- if (chan == local->_oper_chandef.chan)
- local->scan_chandef = local->_oper_chandef;
+ if (chan == local->hw.conf.chandef.chan)
+ local->scan_chandef = local->hw.conf.chandef;
else
local->scan_chandef.width = NL80211_CHAN_WIDTH_20_NOHT;
set_channel:
- if (ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL))
+ if (ieee80211_hw_conf_chan(local))
skip = 1;
/* advance state machine to next channel/band */
@@ -993,7 +1006,10 @@ set_channel:
*/
if ((chan->flags & (IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_RADAR)) ||
!scan_req->n_ssids) {
- *next_delay = IEEE80211_PASSIVE_CHANNEL_TIME;
+ *next_delay = msecs_to_jiffies(scan_req->duration) >
+ IEEE80211_PASSIVE_CHANNEL_TIME ?
+ msecs_to_jiffies(scan_req->duration) :
+ IEEE80211_PASSIVE_CHANNEL_TIME;
local->next_scan_state = SCAN_DECISION;
if (scan_req->n_ssids)
set_bit(SCAN_BEACON_WAIT, &local->scanning);
@@ -1010,7 +1026,7 @@ static void ieee80211_scan_state_suspend(struct ieee80211_local *local,
{
/* switch back to the operating channel */
local->scan_chandef.chan = NULL;
- ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
+ ieee80211_hw_conf_chan(local);
/* disable PS */
ieee80211_offchannel_return(local);
@@ -1309,10 +1325,12 @@ int __ieee80211_request_sched_scan_start(struct ieee80211_sub_if_data *sdata,
ieee80211_prepare_scan_chandef(&chandef);
- ieee80211_build_preq_ies(sdata, ie, num_bands * iebufsz,
- &sched_scan_ies, req->ie,
- req->ie_len, bands_used, rate_masks, &chandef,
- flags);
+ ret = ieee80211_build_preq_ies(sdata, ie, num_bands * iebufsz,
+ &sched_scan_ies, req->ie,
+ req->ie_len, bands_used, rate_masks,
+ &chandef, flags);
+ if (ret < 0)
+ goto error;
ret = drv_sched_scan_start(local, sdata, req, &sched_scan_ies);
if (ret == 0) {
@@ -1320,8 +1338,8 @@ int __ieee80211_request_sched_scan_start(struct ieee80211_sub_if_data *sdata,
rcu_assign_pointer(local->sched_scan_req, req);
}
+error:
kfree(ie);
-
out:
if (ret) {
/* Clean in case of failure after HW restart or upon resume. */