summaryrefslogtreecommitdiffstats
path: root/net/wireless/mesh.c
diff options
context:
space:
mode:
Diffstat (limited to 'net/wireless/mesh.c')
-rw-r--r--net/wireless/mesh.c302
1 files changed, 302 insertions, 0 deletions
diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c
new file mode 100644
index 0000000000..59a3c5c092
--- /dev/null
+++ b/net/wireless/mesh.c
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Portions
+ * Copyright (C) 2022 Intel Corporation
+ */
+#include <linux/ieee80211.h>
+#include <linux/export.h>
+#include <net/cfg80211.h>
+#include "nl80211.h"
+#include "core.h"
+#include "rdev-ops.h"
+
+/* Default values, timeouts in ms */
+#define MESH_TTL 31
+#define MESH_DEFAULT_ELEMENT_TTL 31
+#define MESH_MAX_RETR 3
+#define MESH_RET_T 100
+#define MESH_CONF_T 100
+#define MESH_HOLD_T 100
+
+#define MESH_PATH_TIMEOUT 5000
+#define MESH_RANN_INTERVAL 5000
+#define MESH_PATH_TO_ROOT_TIMEOUT 6000
+#define MESH_ROOT_INTERVAL 5000
+#define MESH_ROOT_CONFIRMATION_INTERVAL 2000
+#define MESH_DEFAULT_PLINK_TIMEOUT 1800 /* timeout in seconds */
+
+/*
+ * Minimum interval between two consecutive PREQs originated by the same
+ * interface
+ */
+#define MESH_PREQ_MIN_INT 10
+#define MESH_PERR_MIN_INT 100
+#define MESH_DIAM_TRAVERSAL_TIME 50
+
+#define MESH_RSSI_THRESHOLD 0
+
+/*
+ * A path will be refreshed if it is used PATH_REFRESH_TIME milliseconds
+ * before timing out. This way it will remain ACTIVE and no data frames
+ * will be unnecessarily held in the pending queue.
+ */
+#define MESH_PATH_REFRESH_TIME 1000
+#define MESH_MIN_DISCOVERY_TIMEOUT (2 * MESH_DIAM_TRAVERSAL_TIME)
+
+/* Default maximum number of established plinks per interface */
+#define MESH_MAX_ESTAB_PLINKS 32
+
+#define MESH_MAX_PREQ_RETRIES 4
+
+#define MESH_SYNC_NEIGHBOR_OFFSET_MAX 50
+
+#define MESH_DEFAULT_BEACON_INTERVAL 1000 /* in 1024 us units (=TUs) */
+#define MESH_DEFAULT_DTIM_PERIOD 2
+#define MESH_DEFAULT_AWAKE_WINDOW 10 /* in 1024 us units (=TUs) */
+
+const struct mesh_config default_mesh_config = {
+ .dot11MeshRetryTimeout = MESH_RET_T,
+ .dot11MeshConfirmTimeout = MESH_CONF_T,
+ .dot11MeshHoldingTimeout = MESH_HOLD_T,
+ .dot11MeshMaxRetries = MESH_MAX_RETR,
+ .dot11MeshTTL = MESH_TTL,
+ .element_ttl = MESH_DEFAULT_ELEMENT_TTL,
+ .auto_open_plinks = true,
+ .dot11MeshMaxPeerLinks = MESH_MAX_ESTAB_PLINKS,
+ .dot11MeshNbrOffsetMaxNeighbor = MESH_SYNC_NEIGHBOR_OFFSET_MAX,
+ .dot11MeshHWMPactivePathTimeout = MESH_PATH_TIMEOUT,
+ .dot11MeshHWMPpreqMinInterval = MESH_PREQ_MIN_INT,
+ .dot11MeshHWMPperrMinInterval = MESH_PERR_MIN_INT,
+ .dot11MeshHWMPnetDiameterTraversalTime = MESH_DIAM_TRAVERSAL_TIME,
+ .dot11MeshHWMPmaxPREQretries = MESH_MAX_PREQ_RETRIES,
+ .path_refresh_time = MESH_PATH_REFRESH_TIME,
+ .min_discovery_timeout = MESH_MIN_DISCOVERY_TIMEOUT,
+ .dot11MeshHWMPRannInterval = MESH_RANN_INTERVAL,
+ .dot11MeshGateAnnouncementProtocol = false,
+ .dot11MeshForwarding = true,
+ .rssi_threshold = MESH_RSSI_THRESHOLD,
+ .ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED,
+ .dot11MeshHWMPactivePathToRootTimeout = MESH_PATH_TO_ROOT_TIMEOUT,
+ .dot11MeshHWMProotInterval = MESH_ROOT_INTERVAL,
+ .dot11MeshHWMPconfirmationInterval = MESH_ROOT_CONFIRMATION_INTERVAL,
+ .power_mode = NL80211_MESH_POWER_ACTIVE,
+ .dot11MeshAwakeWindowDuration = MESH_DEFAULT_AWAKE_WINDOW,
+ .plink_timeout = MESH_DEFAULT_PLINK_TIMEOUT,
+ .dot11MeshNolearn = false,
+};
+
+const struct mesh_setup default_mesh_setup = {
+ /* cfg80211_join_mesh() will pick a channel if needed */
+ .sync_method = IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET,
+ .path_sel_proto = IEEE80211_PATH_PROTOCOL_HWMP,
+ .path_metric = IEEE80211_PATH_METRIC_AIRTIME,
+ .auth_id = 0, /* open */
+ .ie = NULL,
+ .ie_len = 0,
+ .is_secure = false,
+ .user_mpm = false,
+ .beacon_interval = MESH_DEFAULT_BEACON_INTERVAL,
+ .dtim_period = MESH_DEFAULT_DTIM_PERIOD,
+};
+
+int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
+ struct net_device *dev,
+ struct mesh_setup *setup,
+ const struct mesh_config *conf)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ int err;
+
+ BUILD_BUG_ON(IEEE80211_MAX_SSID_LEN != IEEE80211_MAX_MESH_ID_LEN);
+
+ ASSERT_WDEV_LOCK(wdev);
+
+ if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT)
+ return -EOPNOTSUPP;
+
+ if (!(rdev->wiphy.flags & WIPHY_FLAG_MESH_AUTH) &&
+ setup->is_secure)
+ return -EOPNOTSUPP;
+
+ if (wdev->u.mesh.id_len)
+ return -EALREADY;
+
+ if (!setup->mesh_id_len)
+ return -EINVAL;
+
+ if (!rdev->ops->join_mesh)
+ return -EOPNOTSUPP;
+
+ if (!setup->chandef.chan) {
+ /* if no channel explicitly given, use preset channel */
+ setup->chandef = wdev->u.mesh.preset_chandef;
+ }
+
+ if (!setup->chandef.chan) {
+ /* if we don't have that either, use the first usable channel */
+ enum nl80211_band band;
+
+ for (band = 0; band < NUM_NL80211_BANDS; band++) {
+ struct ieee80211_supported_band *sband;
+ struct ieee80211_channel *chan;
+ int i;
+
+ sband = rdev->wiphy.bands[band];
+ if (!sband)
+ continue;
+
+ for (i = 0; i < sband->n_channels; i++) {
+ chan = &sband->channels[i];
+ if (chan->flags & (IEEE80211_CHAN_NO_IR |
+ IEEE80211_CHAN_DISABLED |
+ IEEE80211_CHAN_RADAR))
+ continue;
+ setup->chandef.chan = chan;
+ break;
+ }
+
+ if (setup->chandef.chan)
+ break;
+ }
+
+ /* no usable channel ... */
+ if (!setup->chandef.chan)
+ return -EINVAL;
+
+ setup->chandef.width = NL80211_CHAN_WIDTH_20_NOHT;
+ setup->chandef.center_freq1 = setup->chandef.chan->center_freq;
+ }
+
+ /*
+ * check if basic rates are available otherwise use mandatory rates as
+ * basic rates
+ */
+ if (!setup->basic_rates) {
+ enum nl80211_bss_scan_width scan_width;
+ struct ieee80211_supported_band *sband =
+ rdev->wiphy.bands[setup->chandef.chan->band];
+
+ if (setup->chandef.chan->band == NL80211_BAND_2GHZ) {
+ int i;
+
+ /*
+ * Older versions selected the mandatory rates for
+ * 2.4 GHz as well, but were broken in that only
+ * 1 Mbps was regarded as a mandatory rate. Keep
+ * using just 1 Mbps as the default basic rate for
+ * mesh to be interoperable with older versions.
+ */
+ for (i = 0; i < sband->n_bitrates; i++) {
+ if (sband->bitrates[i].bitrate == 10) {
+ setup->basic_rates = BIT(i);
+ break;
+ }
+ }
+ } else {
+ scan_width = cfg80211_chandef_to_scan_width(&setup->chandef);
+ setup->basic_rates = ieee80211_mandatory_rates(sband,
+ scan_width);
+ }
+ }
+
+ err = cfg80211_chandef_dfs_required(&rdev->wiphy,
+ &setup->chandef,
+ NL80211_IFTYPE_MESH_POINT);
+ if (err < 0)
+ return err;
+ if (err > 0 && !setup->userspace_handles_dfs)
+ return -EINVAL;
+
+ if (!cfg80211_reg_can_beacon(&rdev->wiphy, &setup->chandef,
+ NL80211_IFTYPE_MESH_POINT))
+ return -EINVAL;
+
+ err = rdev_join_mesh(rdev, dev, conf, setup);
+ if (!err) {
+ memcpy(wdev->u.mesh.id, setup->mesh_id, setup->mesh_id_len);
+ wdev->u.mesh.id_len = setup->mesh_id_len;
+ wdev->u.mesh.chandef = setup->chandef;
+ wdev->u.mesh.beacon_interval = setup->beacon_interval;
+ }
+
+ return err;
+}
+
+int cfg80211_set_mesh_channel(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *wdev,
+ struct cfg80211_chan_def *chandef)
+{
+ int err;
+
+ /*
+ * Workaround for libertas (only!), it puts the interface
+ * into mesh mode but doesn't implement join_mesh. Instead,
+ * it is configured via sysfs and then joins the mesh when
+ * you set the channel. Note that the libertas mesh isn't
+ * compatible with 802.11 mesh.
+ */
+ if (rdev->ops->libertas_set_mesh_channel) {
+ if (chandef->width != NL80211_CHAN_WIDTH_20_NOHT)
+ return -EINVAL;
+
+ if (!netif_running(wdev->netdev))
+ return -ENETDOWN;
+
+ err = rdev_libertas_set_mesh_channel(rdev, wdev->netdev,
+ chandef->chan);
+ if (!err)
+ wdev->u.mesh.chandef = *chandef;
+
+ return err;
+ }
+
+ if (wdev->u.mesh.id_len)
+ return -EBUSY;
+
+ wdev->u.mesh.preset_chandef = *chandef;
+ return 0;
+}
+
+int __cfg80211_leave_mesh(struct cfg80211_registered_device *rdev,
+ struct net_device *dev)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ int err;
+
+ ASSERT_WDEV_LOCK(wdev);
+
+ if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT)
+ return -EOPNOTSUPP;
+
+ if (!rdev->ops->leave_mesh)
+ return -EOPNOTSUPP;
+
+ if (!wdev->u.mesh.id_len)
+ return -ENOTCONN;
+
+ err = rdev_leave_mesh(rdev, dev);
+ if (!err) {
+ wdev->conn_owner_nlportid = 0;
+ wdev->u.mesh.id_len = 0;
+ wdev->u.mesh.beacon_interval = 0;
+ memset(&wdev->u.mesh.chandef, 0,
+ sizeof(wdev->u.mesh.chandef));
+ rdev_set_qos_map(rdev, dev, NULL);
+ cfg80211_sched_dfs_chan_update(rdev);
+ }
+
+ return err;
+}
+
+int cfg80211_leave_mesh(struct cfg80211_registered_device *rdev,
+ struct net_device *dev)
+{
+ struct wireless_dev *wdev = dev->ieee80211_ptr;
+ int err;
+
+ wdev_lock(wdev);
+ err = __cfg80211_leave_mesh(rdev, dev);
+ wdev_unlock(wdev);
+
+ return err;
+}
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 20:42:00 +0000