summaryrefslogtreecommitdiffstats
path: root/scripts/Makefile.build
diff options
context:
space:
mode:
Diffstat (limited to 'scripts/Makefile.build')
-rw-r--r--scripts/Makefile.build513
1 files changed, 513 insertions, 0 deletions
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
new file mode 100644
index 0000000000..82e3fb19fd
--- /dev/null
+++ b/scripts/Makefile.build
@@ -0,0 +1,513 @@
+# SPDX-License-Identifier: GPL-2.0
+# ==========================================================================
+# Building
+# ==========================================================================
+
+src := $(obj)
+
+PHONY := $(obj)/
+$(obj)/:
+
+# Init all relevant variables used in kbuild files so
+# 1) they have correct type
+# 2) they do not inherit any value from the environment
+obj-y :=
+obj-m :=
+lib-y :=
+lib-m :=
+always-y :=
+always-m :=
+targets :=
+subdir-y :=
+subdir-m :=
+EXTRA_AFLAGS :=
+EXTRA_CFLAGS :=
+EXTRA_CPPFLAGS :=
+EXTRA_LDFLAGS :=
+asflags-y :=
+ccflags-y :=
+rustflags-y :=
+cppflags-y :=
+ldflags-y :=
+
+subdir-asflags-y :=
+subdir-ccflags-y :=
+
+# Read auto.conf if it exists, otherwise ignore
+-include include/config/auto.conf
+
+include $(srctree)/scripts/Kbuild.include
+include $(srctree)/scripts/Makefile.compiler
+include $(kbuild-file)
+include $(srctree)/scripts/Makefile.lib
+
+# Do not include hostprogs rules unless needed.
+# $(sort ...) is used here to remove duplicated words and excessive spaces.
+hostprogs := $(sort $(hostprogs))
+ifneq ($(hostprogs),)
+include $(srctree)/scripts/Makefile.host
+endif
+
+# Do not include userprogs rules unless needed.
+# $(sort ...) is used here to remove duplicated words and excessive spaces.
+userprogs := $(sort $(userprogs))
+ifneq ($(userprogs),)
+include $(srctree)/scripts/Makefile.userprogs
+endif
+
+ifndef obj
+$(warning kbuild: Makefile.build is included improperly)
+endif
+
+ifeq ($(need-modorder),)
+ifneq ($(obj-m),)
+$(warning $(patsubst %.o,'%.ko',$(obj-m)) will not be built even though obj-m is specified.)
+$(warning You cannot use subdir-y/m to visit a module Makefile. Use obj-y/m instead.)
+endif
+endif
+
+# ===========================================================================
+
+# subdir-builtin and subdir-modorder may contain duplications. Use $(sort ...)
+subdir-builtin := $(sort $(filter %/built-in.a, $(real-obj-y)))
+subdir-modorder := $(sort $(filter %/modules.order, $(obj-m)))
+
+targets-for-builtin := $(extra-y)
+
+ifneq ($(strip $(lib-y) $(lib-m) $(lib-)),)
+targets-for-builtin += $(obj)/lib.a
+endif
+
+ifdef need-builtin
+targets-for-builtin += $(obj)/built-in.a
+endif
+
+targets-for-modules := $(foreach x, o mod, \
+ $(patsubst %.o, %.$x, $(filter %.o, $(obj-m))))
+
+ifdef need-modorder
+targets-for-modules += $(obj)/modules.order
+endif
+
+targets += $(targets-for-builtin) $(targets-for-modules)
+
+# Linus' kernel sanity checking tool
+ifeq ($(KBUILD_CHECKSRC),1)
+ quiet_cmd_checksrc = CHECK $<
+ cmd_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $<
+else ifeq ($(KBUILD_CHECKSRC),2)
+ quiet_cmd_force_checksrc = CHECK $<
+ cmd_force_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $<
+endif
+
+ifneq ($(KBUILD_EXTRA_WARN),)
+ cmd_checkdoc = $(srctree)/scripts/kernel-doc -none $(KDOCFLAGS) \
+ $(if $(findstring 2, $(KBUILD_EXTRA_WARN)), -Wall) \
+ $<
+endif
+
+# Compile C sources (.c)
+# ---------------------------------------------------------------------------
+
+quiet_cmd_cc_s_c = CC $(quiet_modtag) $@
+ cmd_cc_s_c = $(CC) $(filter-out $(DEBUG_CFLAGS) $(CC_FLAGS_LTO), $(c_flags)) -fverbose-asm -S -o $@ $<
+
+$(obj)/%.s: $(src)/%.c FORCE
+ $(call if_changed_dep,cc_s_c)
+
+quiet_cmd_cpp_i_c = CPP $(quiet_modtag) $@
+cmd_cpp_i_c = $(CPP) $(c_flags) -o $@ $<
+
+$(obj)/%.i: $(src)/%.c FORCE
+ $(call if_changed_dep,cpp_i_c)
+
+genksyms = scripts/genksyms/genksyms \
+ $(if $(1), -T $(2)) \
+ $(if $(KBUILD_PRESERVE), -p) \
+ -r $(or $(wildcard $(2:.symtypes=.symref)), /dev/null)
+
+# These mirror gensymtypes_S and co below, keep them in synch.
+cmd_gensymtypes_c = $(CPP) -D__GENKSYMS__ $(c_flags) $< | $(genksyms)
+
+quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@
+ cmd_cc_symtypes_c = $(call cmd_gensymtypes_c,true,$@) >/dev/null
+
+$(obj)/%.symtypes : $(src)/%.c FORCE
+ $(call cmd,cc_symtypes_c)
+
+# LLVM assembly
+# Generate .ll files from .c
+quiet_cmd_cc_ll_c = CC $(quiet_modtag) $@
+ cmd_cc_ll_c = $(CC) $(c_flags) -emit-llvm -S -fno-discard-value-names -o $@ $<
+
+$(obj)/%.ll: $(src)/%.c FORCE
+ $(call if_changed_dep,cc_ll_c)
+
+# C (.c) files
+# The C file is compiled and updated dependency information is generated.
+# (See cmd_cc_o_c + relevant part of rule_cc_o_c)
+
+is-single-obj-m = $(and $(part-of-module),$(filter $@, $(obj-m)),y)
+
+# When a module consists of a single object, there is no reason to keep LLVM IR.
+# Make $(LD) covert LLVM IR to ELF here.
+ifdef CONFIG_LTO_CLANG
+cmd_ld_single_m = $(if $(is-single-obj-m), ; $(LD) $(ld_flags) -r -o $(tmp-target) $@; mv $(tmp-target) $@)
+endif
+
+quiet_cmd_cc_o_c = CC $(quiet_modtag) $@
+ cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< \
+ $(cmd_ld_single_m) \
+ $(cmd_objtool)
+
+ifdef CONFIG_MODVERSIONS
+# When module versioning is enabled the following steps are executed:
+# o compile a <file>.o from <file>.c
+# o if <file>.o doesn't contain a __export_symbol_*, i.e. does
+# not export symbols, it's done.
+# o otherwise, we calculate symbol versions using the good old
+# genksyms on the preprocessed source and dump them into the .cmd file.
+# o modpost will extract versions from that file and create *.c files that will
+# be compiled and linked to the kernel and/or modules.
+
+gen_symversions = \
+ if $(NM) $@ 2>/dev/null | grep -q ' __export_symbol_'; then \
+ $(call cmd_gensymtypes_$(1),$(KBUILD_SYMTYPES),$(@:.o=.symtypes)) \
+ >> $(dot-target).cmd; \
+ fi
+
+cmd_gen_symversions_c = $(call gen_symversions,c)
+
+endif
+
+ifdef CONFIG_FTRACE_MCOUNT_USE_RECORDMCOUNT
+# compiler will not generate __mcount_loc use recordmcount or recordmcount.pl
+ifdef BUILD_C_RECORDMCOUNT
+ifeq ("$(origin RECORDMCOUNT_WARN)", "command line")
+ RECORDMCOUNT_FLAGS = -w
+endif
+# Due to recursion, we must skip empty.o.
+# The empty.o file is created in the make process in order to determine
+# the target endianness and word size. It is made before all other C
+# files, including recordmcount.
+sub_cmd_record_mcount = \
+ if [ $(@) != "scripts/mod/empty.o" ]; then \
+ $(objtree)/scripts/recordmcount $(RECORDMCOUNT_FLAGS) "$(@)"; \
+ fi;
+recordmcount_source := $(srctree)/scripts/recordmcount.c \
+ $(srctree)/scripts/recordmcount.h
+else
+sub_cmd_record_mcount = perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \
+ "$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \
+ "$(if $(CONFIG_64BIT),64,32)" \
+ "$(OBJDUMP)" "$(OBJCOPY)" "$(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS)" \
+ "$(LD) $(KBUILD_LDFLAGS)" "$(NM)" "$(RM)" "$(MV)" \
+ "$(if $(part-of-module),1,0)" "$(@)";
+recordmcount_source := $(srctree)/scripts/recordmcount.pl
+endif # BUILD_C_RECORDMCOUNT
+cmd_record_mcount = $(if $(findstring $(strip $(CC_FLAGS_FTRACE)),$(_c_flags)), \
+ $(sub_cmd_record_mcount))
+endif # CONFIG_FTRACE_MCOUNT_USE_RECORDMCOUNT
+
+# 'OBJECT_FILES_NON_STANDARD := y': skip objtool checking for a directory
+# 'OBJECT_FILES_NON_STANDARD_foo.o := 'y': skip objtool checking for a file
+# 'OBJECT_FILES_NON_STANDARD_foo.o := 'n': override directory skip for a file
+
+is-standard-object = $(if $(filter-out y%, $(OBJECT_FILES_NON_STANDARD_$(basetarget).o)$(OBJECT_FILES_NON_STANDARD)n),y)
+
+$(obj)/%.o: objtool-enabled = $(if $(is-standard-object),$(if $(delay-objtool),$(is-single-obj-m),y))
+
+ifneq ($(findstring 1, $(KBUILD_EXTRA_WARN)),)
+cmd_warn_shared_object = $(if $(word 2, $(modname-multi)),$(warning $(kbuild-file): $*.o is added to multiple modules: $(modname-multi)))
+endif
+
+define rule_cc_o_c
+ $(call cmd_and_fixdep,cc_o_c)
+ $(call cmd,checksrc)
+ $(call cmd,checkdoc)
+ $(call cmd,gen_objtooldep)
+ $(call cmd,gen_symversions_c)
+ $(call cmd,record_mcount)
+ $(call cmd,warn_shared_object)
+endef
+
+define rule_as_o_S
+ $(call cmd_and_fixdep,as_o_S)
+ $(call cmd,gen_objtooldep)
+ $(call cmd,gen_symversions_S)
+ $(call cmd,warn_shared_object)
+endef
+
+# Built-in and composite module parts
+$(obj)/%.o: $(src)/%.c $(recordmcount_source) FORCE
+ $(call if_changed_rule,cc_o_c)
+ $(call cmd,force_checksrc)
+
+# To make this rule robust against "Argument list too long" error,
+# ensure to add $(obj)/ prefix by a shell command.
+cmd_mod = printf '%s\n' $(call real-search, $*.o, .o, -objs -y -m) | \
+ $(AWK) '!x[$$0]++ { print("$(obj)/"$$0) }' > $@
+
+$(obj)/%.mod: FORCE
+ $(call if_changed,mod)
+
+quiet_cmd_cc_lst_c = MKLST $@
+ cmd_cc_lst_c = $(CC) $(c_flags) -g -c -o $*.o $< && \
+ $(CONFIG_SHELL) $(srctree)/scripts/makelst $*.o \
+ System.map $(OBJDUMP) > $@
+
+$(obj)/%.lst: $(src)/%.c FORCE
+ $(call if_changed_dep,cc_lst_c)
+
+# Compile Rust sources (.rs)
+# ---------------------------------------------------------------------------
+
+rust_allowed_features := new_uninit
+
+# `--out-dir` is required to avoid temporaries being created by `rustc` in the
+# current working directory, which may be not accessible in the out-of-tree
+# modules case.
+rust_common_cmd = \
+ RUST_MODFILE=$(modfile) $(RUSTC_OR_CLIPPY) $(rust_flags) \
+ -Zallow-features=$(rust_allowed_features) \
+ -Zcrate-attr=no_std \
+ -Zcrate-attr='feature($(rust_allowed_features))' \
+ --extern alloc --extern kernel \
+ --crate-type rlib -L $(objtree)/rust/ \
+ --crate-name $(basename $(notdir $@)) \
+ --out-dir $(dir $@) --emit=dep-info=$(depfile)
+
+# `--emit=obj`, `--emit=asm` and `--emit=llvm-ir` imply a single codegen unit
+# will be used. We explicitly request `-Ccodegen-units=1` in any case, and
+# the compiler shows a warning if it is not 1. However, if we ever stop
+# requesting it explicitly and we start using some other `--emit` that does not
+# imply it (and for which codegen is performed), then we would be out of sync,
+# i.e. the outputs we would get for the different single targets (e.g. `.ll`)
+# would not match each other.
+
+quiet_cmd_rustc_o_rs = $(RUSTC_OR_CLIPPY_QUIET) $(quiet_modtag) $@
+ cmd_rustc_o_rs = $(rust_common_cmd) --emit=obj=$@ $<
+
+$(obj)/%.o: $(src)/%.rs FORCE
+ $(call if_changed_dep,rustc_o_rs)
+
+quiet_cmd_rustc_rsi_rs = $(RUSTC_OR_CLIPPY_QUIET) $(quiet_modtag) $@
+ cmd_rustc_rsi_rs = \
+ $(rust_common_cmd) -Zunpretty=expanded $< >$@; \
+ command -v $(RUSTFMT) >/dev/null && $(RUSTFMT) $@
+
+$(obj)/%.rsi: $(src)/%.rs FORCE
+ $(call if_changed_dep,rustc_rsi_rs)
+
+quiet_cmd_rustc_s_rs = $(RUSTC_OR_CLIPPY_QUIET) $(quiet_modtag) $@
+ cmd_rustc_s_rs = $(rust_common_cmd) --emit=asm=$@ $<
+
+$(obj)/%.s: $(src)/%.rs FORCE
+ $(call if_changed_dep,rustc_s_rs)
+
+quiet_cmd_rustc_ll_rs = $(RUSTC_OR_CLIPPY_QUIET) $(quiet_modtag) $@
+ cmd_rustc_ll_rs = $(rust_common_cmd) --emit=llvm-ir=$@ $<
+
+$(obj)/%.ll: $(src)/%.rs FORCE
+ $(call if_changed_dep,rustc_ll_rs)
+
+# Compile assembler sources (.S)
+# ---------------------------------------------------------------------------
+
+# .S file exports must have their C prototypes defined in asm/asm-prototypes.h
+# or a file that it includes, in order to get versioned symbols. We build a
+# dummy C file that includes asm-prototypes and the EXPORT_SYMBOL lines from
+# the .S file (with trailing ';'), and run genksyms on that, to extract vers.
+#
+# This is convoluted. The .S file must first be preprocessed to run guards and
+# expand names, then the resulting exports must be constructed into plain
+# EXPORT_SYMBOL(symbol); to build our dummy C file, and that gets preprocessed
+# to make the genksyms input.
+#
+# These mirror gensymtypes_c and co above, keep them in synch.
+cmd_gensymtypes_S = \
+ { echo "\#include <linux/kernel.h>" ; \
+ echo "\#include <asm/asm-prototypes.h>" ; \
+ $(NM) $@ | sed -n 's/.* __export_symbol_\(.*\)/EXPORT_SYMBOL(\1);/p' ; } | \
+ $(CPP) -D__GENKSYMS__ $(c_flags) -xc - | $(genksyms)
+
+quiet_cmd_cc_symtypes_S = SYM $(quiet_modtag) $@
+ cmd_cc_symtypes_S = $(call cmd_gensymtypes_S,true,$@) >/dev/null
+
+$(obj)/%.symtypes : $(src)/%.S FORCE
+ $(call cmd,cc_symtypes_S)
+
+
+quiet_cmd_cpp_s_S = CPP $(quiet_modtag) $@
+cmd_cpp_s_S = $(CPP) $(a_flags) -o $@ $<
+
+$(obj)/%.s: $(src)/%.S FORCE
+ $(call if_changed_dep,cpp_s_S)
+
+quiet_cmd_as_o_S = AS $(quiet_modtag) $@
+ cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $< $(cmd_objtool)
+
+ifdef CONFIG_ASM_MODVERSIONS
+
+# versioning matches the C process described above, with difference that
+# we parse asm-prototypes.h C header to get function definitions.
+
+cmd_gen_symversions_S = $(call gen_symversions,S)
+
+endif
+
+$(obj)/%.o: $(src)/%.S FORCE
+ $(call if_changed_rule,as_o_S)
+
+targets += $(filter-out $(subdir-builtin), $(real-obj-y))
+targets += $(filter-out $(subdir-modorder), $(real-obj-m))
+targets += $(real-dtb-y) $(lib-y) $(always-y)
+
+# Linker scripts preprocessor (.lds.S -> .lds)
+# ---------------------------------------------------------------------------
+quiet_cmd_cpp_lds_S = LDS $@
+ cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -U$(ARCH) \
+ -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $<
+
+$(obj)/%.lds: $(src)/%.lds.S FORCE
+ $(call if_changed_dep,cpp_lds_S)
+
+# ASN.1 grammar
+# ---------------------------------------------------------------------------
+quiet_cmd_asn1_compiler = ASN.1 $(basename $@).[ch]
+ cmd_asn1_compiler = $(objtree)/scripts/asn1_compiler $< \
+ $(basename $@).c $(basename $@).h
+
+$(obj)/%.asn1.c $(obj)/%.asn1.h: $(src)/%.asn1 $(objtree)/scripts/asn1_compiler
+ $(call cmd,asn1_compiler)
+
+# Build the compiled-in targets
+# ---------------------------------------------------------------------------
+
+# To build objects in subdirs, we need to descend into the directories
+$(subdir-builtin): $(obj)/%/built-in.a: $(obj)/% ;
+$(subdir-modorder): $(obj)/%/modules.order: $(obj)/% ;
+
+#
+# Rule to compile a set of .o files into one .a file (without symbol table)
+#
+# To make this rule robust against "Argument list too long" error,
+# remove $(obj)/ prefix, and restore it by a shell command.
+
+quiet_cmd_ar_builtin = AR $@
+ cmd_ar_builtin = rm -f $@; \
+ $(if $(real-prereqs), printf "$(obj)/%s " $(patsubst $(obj)/%,%,$(real-prereqs)) | xargs) \
+ $(AR) cDPrST $@
+
+$(obj)/built-in.a: $(real-obj-y) FORCE
+ $(call if_changed,ar_builtin)
+
+#
+# Rule to create modules.order file
+#
+# Create commands to either record .ko file or cat modules.order from
+# a subdirectory
+# Add $(obj-m) as the prerequisite to avoid updating the timestamp of
+# modules.order unless contained modules are updated.
+
+cmd_modules_order = { $(foreach m, $(real-prereqs), \
+ $(if $(filter %/modules.order, $m), cat $m, echo $m);) :; } \
+ > $@
+
+$(obj)/modules.order: $(obj-m) FORCE
+ $(call if_changed,modules_order)
+
+#
+# Rule to compile a set of .o files into one .a file (with symbol table)
+#
+
+$(obj)/lib.a: $(lib-y) FORCE
+ $(call if_changed,ar)
+
+quiet_cmd_ld_multi_m = LD [M] $@
+ cmd_ld_multi_m = $(LD) $(ld_flags) -r -o $@ @$(patsubst %.o,%.mod,$@) $(cmd_objtool)
+
+define rule_ld_multi_m
+ $(call cmd_and_savecmd,ld_multi_m)
+ $(call cmd,gen_objtooldep)
+endef
+
+$(multi-obj-m): objtool-enabled := $(delay-objtool)
+$(multi-obj-m): part-of-module := y
+$(multi-obj-m): %.o: %.mod FORCE
+ $(call if_changed_rule,ld_multi_m)
+$(call multi_depend, $(multi-obj-m), .o, -objs -y -m)
+
+# Add intermediate targets:
+# When building objects with specific suffix patterns, add intermediate
+# targets that the final targets are derived from.
+intermediate_targets = $(foreach sfx, $(2), \
+ $(patsubst %$(strip $(1)),%$(sfx), \
+ $(filter %$(strip $(1)), $(targets))))
+# %.asn1.o <- %.asn1.[ch] <- %.asn1
+# %.dtb.o <- %.dtb.S <- %.dtb <- %.dts
+# %.dtbo.o <- %.dtbo.S <- %.dtbo <- %.dtso
+# %.lex.o <- %.lex.c <- %.l
+# %.tab.o <- %.tab.[ch] <- %.y
+targets += $(call intermediate_targets, .asn1.o, .asn1.c .asn1.h) \
+ $(call intermediate_targets, .dtb.o, .dtb.S .dtb) \
+ $(call intermediate_targets, .dtbo.o, .dtbo.S .dtbo) \
+ $(call intermediate_targets, .lex.o, .lex.c) \
+ $(call intermediate_targets, .tab.o, .tab.c .tab.h)
+
+# Build
+# ---------------------------------------------------------------------------
+
+$(obj)/: $(if $(KBUILD_BUILTIN), $(targets-for-builtin)) \
+ $(if $(KBUILD_MODULES), $(targets-for-modules)) \
+ $(subdir-ym) $(always-y)
+ @:
+
+# Single targets
+# ---------------------------------------------------------------------------
+
+single-subdirs := $(foreach d, $(subdir-ym), $(if $(filter $d/%, $(MAKECMDGOALS)), $d))
+single-subdir-goals := $(filter $(addsuffix /%, $(single-subdirs)), $(MAKECMDGOALS))
+
+$(single-subdir-goals): $(single-subdirs)
+ @:
+
+# Descending
+# ---------------------------------------------------------------------------
+
+PHONY += $(subdir-ym)
+$(subdir-ym):
+ $(Q)$(MAKE) $(build)=$@ \
+ need-builtin=$(if $(filter $@/built-in.a, $(subdir-builtin)),1) \
+ need-modorder=$(if $(filter $@/modules.order, $(subdir-modorder)),1) \
+ $(filter $@/%, $(single-subdir-goals))
+
+# Add FORCE to the prequisites of a target to force it to be always rebuilt.
+# ---------------------------------------------------------------------------
+
+PHONY += FORCE
+
+FORCE:
+
+targets += $(filter-out $(single-subdir-goals), $(MAKECMDGOALS))
+targets := $(filter-out $(PHONY), $(targets))
+
+# Read all saved command lines and dependencies for the $(targets) we
+# may be building above, using $(if_changed{,_dep}). As an
+# optimization, we don't need to read them if the target does not
+# exist, we will rebuild anyway in that case.
+
+existing-targets := $(wildcard $(sort $(targets)))
+
+-include $(foreach f,$(existing-targets),$(dir $(f)).$(notdir $(f)).cmd)
+
+# Create directories for object files if they do not exist
+obj-dirs := $(sort $(patsubst %/,%, $(dir $(targets))))
+# If targets exist, their directories apparently exist. Skip mkdir.
+existing-dirs := $(sort $(patsubst %/,%, $(dir $(existing-targets))))
+obj-dirs := $(strip $(filter-out $(existing-dirs), $(obj-dirs)))
+ifneq ($(obj-dirs),)
+$(shell mkdir -p $(obj-dirs))
+endif
+
+.PHONY: $(PHONY)