diff options
Diffstat (limited to '')
| -rw-r--r-- | sound/pci/lx6464es/lx_defs.h | 361 |
1 files changed, 361 insertions, 0 deletions
diff --git a/sound/pci/lx6464es/lx_defs.h b/sound/pci/lx6464es/lx_defs.h new file mode 100644 index 0000000000..eca5367ba5 --- /dev/null +++ b/sound/pci/lx6464es/lx_defs.h @@ -0,0 +1,361 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* -*- linux-c -*- * + * + * ALSA driver for the digigram lx6464es interface + * adapted upstream headers + * + * Copyright (c) 2009 Tim Blechmann <tim@klingt.org> + */ + +#ifndef LX_DEFS_H +#define LX_DEFS_H + +/* code adapted from ethersound.h */ +#define XES_FREQ_COUNT8_MASK 0x00001FFF /* compteur 25MHz entre 8 ech. */ +#define XES_FREQ_COUNT8_44_MIN 0x00001288 /* 25M / + * [ 44k - ( 44.1k + 48k ) / 2 ] + * * 8 */ +#define XES_FREQ_COUNT8_44_MAX 0x000010F0 /* 25M / [ ( 44.1k + 48k ) / 2 ] + * * 8 */ +#define XES_FREQ_COUNT8_48_MAX 0x00000F08 /* 25M / + * [ 48k + ( 44.1k + 48k ) / 2 ] + * * 8 */ + +/* code adapted from LXES_registers.h */ + +#define IOCR_OUTPUTS_OFFSET 0 /* (rw) offset for the number of OUTs in the + * ConfES register. */ +#define IOCR_INPUTS_OFFSET 8 /* (rw) offset for the number of INs in the + * ConfES register. */ +#define FREQ_RATIO_OFFSET 19 /* (rw) offset for frequency ratio in the + * ConfES register. */ +#define FREQ_RATIO_SINGLE_MODE 0x01 /* value for single mode frequency ratio: + * sample rate = frequency rate. */ + +#define CONFES_READ_PART_MASK 0x00070000 +#define CONFES_WRITE_PART_MASK 0x00F80000 + +/* code adapted from if_drv_mb.h */ + +#define MASK_SYS_STATUS_ERROR (1L << 31) /* events that lead to a PCI irq if + * not yet pending */ +#define MASK_SYS_STATUS_URUN (1L << 30) +#define MASK_SYS_STATUS_ORUN (1L << 29) +#define MASK_SYS_STATUS_EOBO (1L << 28) +#define MASK_SYS_STATUS_EOBI (1L << 27) +#define MASK_SYS_STATUS_FREQ (1L << 26) +#define MASK_SYS_STATUS_ESA (1L << 25) /* reserved, this is set by the + * XES */ +#define MASK_SYS_STATUS_TIMER (1L << 24) + +#define MASK_SYS_ASYNC_EVENTS (MASK_SYS_STATUS_ERROR | \ + MASK_SYS_STATUS_URUN | \ + MASK_SYS_STATUS_ORUN | \ + MASK_SYS_STATUS_EOBO | \ + MASK_SYS_STATUS_EOBI | \ + MASK_SYS_STATUS_FREQ | \ + MASK_SYS_STATUS_ESA) + +#define MASK_SYS_PCI_EVENTS (MASK_SYS_ASYNC_EVENTS | \ + MASK_SYS_STATUS_TIMER) + +#define MASK_SYS_TIMER_COUNT 0x0000FFFF + +#define MASK_SYS_STATUS_EOT_PLX (1L << 22) /* event that remains + * internal: reserved fo end + * of plx dma */ +#define MASK_SYS_STATUS_XES (1L << 21) /* event that remains + * internal: pending XES + * IRQ */ +#define MASK_SYS_STATUS_CMD_DONE (1L << 20) /* alternate command + * management: notify driver + * instead of polling */ + + +#define MAX_STREAM_BUFFER 5 /* max amount of stream buffers. */ + +#define MICROBLAZE_IBL_MIN 32 +#define MICROBLAZE_IBL_DEFAULT 128 +#define MICROBLAZE_IBL_MAX 512 +/* #define MASK_GRANULARITY (2*MICROBLAZE_IBL_MAX-1) */ + + + +/* command opcodes, see reference for details */ + +/* + the capture bit position in the object_id field in driver commands + depends upon the number of managed channels. For now, 64 IN + 64 OUT are + supported. HOwever, the communication protocol forsees 1024 channels, hence + bit 10 indicates a capture (input) object). +*/ +#define ID_IS_CAPTURE (1L << 10) +#define ID_OFFSET 13 /* object ID is at the 13th bit in the + * 1st command word.*/ +#define ID_CH_MASK 0x3F +#define OPCODE_OFFSET 24 /* offset of the command opcode in the first + * command word.*/ + +enum cmd_mb_opcodes { + CMD_00_INFO_DEBUG = 0x00, + CMD_01_GET_SYS_CFG = 0x01, + CMD_02_SET_GRANULARITY = 0x02, + CMD_03_SET_TIMER_IRQ = 0x03, + CMD_04_GET_EVENT = 0x04, + CMD_05_GET_PIPES = 0x05, + + CMD_06_ALLOCATE_PIPE = 0x06, + CMD_07_RELEASE_PIPE = 0x07, + CMD_08_ASK_BUFFERS = 0x08, + CMD_09_STOP_PIPE = 0x09, + CMD_0A_GET_PIPE_SPL_COUNT = 0x0a, + CMD_0B_TOGGLE_PIPE_STATE = 0x0b, + + CMD_0C_DEF_STREAM = 0x0c, + CMD_0D_SET_MUTE = 0x0d, + CMD_0E_GET_STREAM_SPL_COUNT = 0x0e, + CMD_0F_UPDATE_BUFFER = 0x0f, + CMD_10_GET_BUFFER = 0x10, + CMD_11_CANCEL_BUFFER = 0x11, + CMD_12_GET_PEAK = 0x12, + CMD_13_SET_STREAM_STATE = 0x13, + CMD_14_INVALID = 0x14, +}; + +/* pipe states */ +enum pipe_state_t { + PSTATE_IDLE = 0, /* the pipe is not processed in the XES_IRQ + * (free or stopped, or paused). */ + PSTATE_RUN = 1, /* sustained play/record state. */ + PSTATE_PURGE = 2, /* the ES channels are now off, render pipes do + * not DMA, record pipe do a last DMA. */ + PSTATE_ACQUIRE = 3, /* the ES channels are now on, render pipes do + * not yet increase their sample count, record + * pipes do not DMA. */ + PSTATE_CLOSING = 4, /* the pipe is releasing, and may not yet + * receive an "alloc" command. */ +}; + +/* stream states */ +enum stream_state_t { + SSTATE_STOP = 0x00, /* setting to stop resets the stream spl + * count.*/ + SSTATE_RUN = (0x01 << 0), /* start DMA and spl count handling. */ + SSTATE_PAUSE = (0x01 << 1), /* pause DMA and spl count handling. */ +}; + +/* buffer flags */ +enum buffer_flags { + BF_VALID = 0x80, /* set if the buffer is valid, clear if free.*/ + BF_CURRENT = 0x40, /* set if this is the current buffer (there is + * always a current buffer).*/ + BF_NOTIFY_EOB = 0x20, /* set if this buffer must cause a PCI event + * when finished.*/ + BF_CIRCULAR = 0x10, /* set if buffer[1] must be copied to buffer[0] + * by the end of this buffer.*/ + BF_64BITS_ADR = 0x08, /* set if the hi part of the address is valid.*/ + BF_xx = 0x04, /* future extension.*/ + BF_EOB = 0x02, /* set if finished, but not yet free.*/ + BF_PAUSE = 0x01, /* pause stream at buffer end.*/ + BF_ZERO = 0x00, /* no flags (init).*/ +}; + +/* +* Stream Flags definitions +*/ +enum stream_flags { + SF_ZERO = 0x00000000, /* no flags (stream invalid). */ + SF_VALID = 0x10000000, /* the stream has a valid DMA_conf + * info (setstreamformat). */ + SF_XRUN = 0x20000000, /* the stream is un x-run state. */ + SF_START = 0x40000000, /* the DMA is running.*/ + SF_ASIO = 0x80000000, /* ASIO.*/ +}; + + +#define MASK_SPL_COUNT_HI 0x00FFFFFF /* 4 MSBits are status bits */ +#define PSTATE_OFFSET 28 /* 4 MSBits are status bits */ + + +#define MASK_STREAM_HAS_MAPPING (1L << 12) +#define MASK_STREAM_IS_ASIO (1L << 9) +#define STREAM_FMT_OFFSET 10 /* the stream fmt bits start at the 10th + * bit in the command word. */ + +#define STREAM_FMT_16b 0x02 +#define STREAM_FMT_intel 0x01 + +#define FREQ_FIELD_OFFSET 15 /* offset of the freq field in the response + * word */ + +#define BUFF_FLAGS_OFFSET 24 /* offset of the buffer flags in the + * response word. */ +#define MASK_DATA_SIZE 0x00FFFFFF /* this must match the field size of + * datasize in the buffer_t structure. */ + +#define MASK_BUFFER_ID 0xFF /* the cancel command awaits a buffer ID, + * may be 0xFF for "current". */ + + +/* code adapted from PcxErr_e.h */ + +/* Bits masks */ + +#define ERROR_MASK 0x8000 + +#define SOURCE_MASK 0x7800 + +#define E_SOURCE_BOARD 0x4000 /* 8 >> 1 */ +#define E_SOURCE_DRV 0x2000 /* 4 >> 1 */ +#define E_SOURCE_API 0x1000 /* 2 >> 1 */ +/* Error tools */ +#define E_SOURCE_TOOLS 0x0800 /* 1 >> 1 */ +/* Error pcxaudio */ +#define E_SOURCE_AUDIO 0x1800 /* 3 >> 1 */ +/* Error virtual pcx */ +#define E_SOURCE_VPCX 0x2800 /* 5 >> 1 */ +/* Error dispatcher */ +#define E_SOURCE_DISPATCHER 0x3000 /* 6 >> 1 */ +/* Error from CobraNet firmware */ +#define E_SOURCE_COBRANET 0x3800 /* 7 >> 1 */ + +#define E_SOURCE_USER 0x7800 + +#define CLASS_MASK 0x0700 + +#define CODE_MASK 0x00FF + +/* Bits values */ + +/* Values for the error/warning bit */ +#define ERROR_VALUE 0x8000 +#define WARNING_VALUE 0x0000 + +/* Class values */ +#define E_CLASS_GENERAL 0x0000 +#define E_CLASS_INVALID_CMD 0x0100 +#define E_CLASS_INVALID_STD_OBJECT 0x0200 +#define E_CLASS_RSRC_IMPOSSIBLE 0x0300 +#define E_CLASS_WRONG_CONTEXT 0x0400 +#define E_CLASS_BAD_SPECIFIC_PARAMETER 0x0500 +#define E_CLASS_REAL_TIME_ERROR 0x0600 +#define E_CLASS_DIRECTSHOW 0x0700 +#define E_CLASS_FREE 0x0700 + + +/* Complete DRV error code for the general class */ +#define ED_GN (ERROR_VALUE | E_SOURCE_DRV | E_CLASS_GENERAL) +#define ED_CONCURRENCY (ED_GN | 0x01) +#define ED_DSP_CRASHED (ED_GN | 0x02) +#define ED_UNKNOWN_BOARD (ED_GN | 0x03) +#define ED_NOT_INSTALLED (ED_GN | 0x04) +#define ED_CANNOT_OPEN_SVC_MANAGER (ED_GN | 0x05) +#define ED_CANNOT_READ_REGISTRY (ED_GN | 0x06) +#define ED_DSP_VERSION_MISMATCH (ED_GN | 0x07) +#define ED_UNAVAILABLE_FEATURE (ED_GN | 0x08) +#define ED_CANCELLED (ED_GN | 0x09) +#define ED_NO_RESPONSE_AT_IRQA (ED_GN | 0x10) +#define ED_INVALID_ADDRESS (ED_GN | 0x11) +#define ED_DSP_CORRUPTED (ED_GN | 0x12) +#define ED_PENDING_OPERATION (ED_GN | 0x13) +#define ED_NET_ALLOCATE_MEMORY_IMPOSSIBLE (ED_GN | 0x14) +#define ED_NET_REGISTER_ERROR (ED_GN | 0x15) +#define ED_NET_THREAD_ERROR (ED_GN | 0x16) +#define ED_NET_OPEN_ERROR (ED_GN | 0x17) +#define ED_NET_CLOSE_ERROR (ED_GN | 0x18) +#define ED_NET_NO_MORE_PACKET (ED_GN | 0x19) +#define ED_NET_NO_MORE_BUFFER (ED_GN | 0x1A) +#define ED_NET_SEND_ERROR (ED_GN | 0x1B) +#define ED_NET_RECEIVE_ERROR (ED_GN | 0x1C) +#define ED_NET_WRONG_MSG_SIZE (ED_GN | 0x1D) +#define ED_NET_WAIT_ERROR (ED_GN | 0x1E) +#define ED_NET_EEPROM_ERROR (ED_GN | 0x1F) +#define ED_INVALID_RS232_COM_NUMBER (ED_GN | 0x20) +#define ED_INVALID_RS232_INIT (ED_GN | 0x21) +#define ED_FILE_ERROR (ED_GN | 0x22) +#define ED_INVALID_GPIO_CMD (ED_GN | 0x23) +#define ED_RS232_ALREADY_OPENED (ED_GN | 0x24) +#define ED_RS232_NOT_OPENED (ED_GN | 0x25) +#define ED_GPIO_ALREADY_OPENED (ED_GN | 0x26) +#define ED_GPIO_NOT_OPENED (ED_GN | 0x27) +#define ED_REGISTRY_ERROR (ED_GN | 0x28) /* <- NCX */ +#define ED_INVALID_SERVICE (ED_GN | 0x29) /* <- NCX */ + +#define ED_READ_FILE_ALREADY_OPENED (ED_GN | 0x2a) /* <- Decalage + * pour RCX + * (old 0x28) + * */ +#define ED_READ_FILE_INVALID_COMMAND (ED_GN | 0x2b) /* ~ */ +#define ED_READ_FILE_INVALID_PARAMETER (ED_GN | 0x2c) /* ~ */ +#define ED_READ_FILE_ALREADY_CLOSED (ED_GN | 0x2d) /* ~ */ +#define ED_READ_FILE_NO_INFORMATION (ED_GN | 0x2e) /* ~ */ +#define ED_READ_FILE_INVALID_HANDLE (ED_GN | 0x2f) /* ~ */ +#define ED_READ_FILE_END_OF_FILE (ED_GN | 0x30) /* ~ */ +#define ED_READ_FILE_ERROR (ED_GN | 0x31) /* ~ */ + +#define ED_DSP_CRASHED_EXC_DSPSTACK_OVERFLOW (ED_GN | 0x32) /* <- Decalage pour + * PCX (old 0x14) */ +#define ED_DSP_CRASHED_EXC_SYSSTACK_OVERFLOW (ED_GN | 0x33) /* ~ */ +#define ED_DSP_CRASHED_EXC_ILLEGAL (ED_GN | 0x34) /* ~ */ +#define ED_DSP_CRASHED_EXC_TIMER_REENTRY (ED_GN | 0x35) /* ~ */ +#define ED_DSP_CRASHED_EXC_FATAL_ERROR (ED_GN | 0x36) /* ~ */ + +#define ED_FLASH_PCCARD_NOT_PRESENT (ED_GN | 0x37) + +#define ED_NO_CURRENT_CLOCK (ED_GN | 0x38) + +/* Complete DRV error code for real time class */ +#define ED_RT (ERROR_VALUE | E_SOURCE_DRV | E_CLASS_REAL_TIME_ERROR) +#define ED_DSP_TIMED_OUT (ED_RT | 0x01) +#define ED_DSP_CHK_TIMED_OUT (ED_RT | 0x02) +#define ED_STREAM_OVERRUN (ED_RT | 0x03) +#define ED_DSP_BUSY (ED_RT | 0x04) +#define ED_DSP_SEMAPHORE_TIME_OUT (ED_RT | 0x05) +#define ED_BOARD_TIME_OUT (ED_RT | 0x06) +#define ED_XILINX_ERROR (ED_RT | 0x07) +#define ED_COBRANET_ITF_NOT_RESPONDING (ED_RT | 0x08) + +/* Complete BOARD error code for the invaid standard object class */ +#define EB_ISO (ERROR_VALUE | E_SOURCE_BOARD | \ + E_CLASS_INVALID_STD_OBJECT) +#define EB_INVALID_EFFECT (EB_ISO | 0x00) +#define EB_INVALID_PIPE (EB_ISO | 0x40) +#define EB_INVALID_STREAM (EB_ISO | 0x80) +#define EB_INVALID_AUDIO (EB_ISO | 0xC0) + +/* Complete BOARD error code for impossible resource allocation class */ +#define EB_RI (ERROR_VALUE | E_SOURCE_BOARD | E_CLASS_RSRC_IMPOSSIBLE) +#define EB_ALLOCATE_ALL_STREAM_TRANSFERT_BUFFERS_IMPOSSIBLE (EB_RI | 0x01) +#define EB_ALLOCATE_PIPE_SAMPLE_BUFFER_IMPOSSIBLE (EB_RI | 0x02) + +#define EB_ALLOCATE_MEM_STREAM_IMPOSSIBLE \ + EB_ALLOCATE_ALL_STREAM_TRANSFERT_BUFFERS_IMPOSSIBLE +#define EB_ALLOCATE_MEM_PIPE_IMPOSSIBLE \ + EB_ALLOCATE_PIPE_SAMPLE_BUFFER_IMPOSSIBLE + +#define EB_ALLOCATE_DIFFERED_CMD_IMPOSSIBLE (EB_RI | 0x03) +#define EB_TOO_MANY_DIFFERED_CMD (EB_RI | 0x04) +#define EB_RBUFFERS_TABLE_OVERFLOW (EB_RI | 0x05) +#define EB_ALLOCATE_EFFECTS_IMPOSSIBLE (EB_RI | 0x08) +#define EB_ALLOCATE_EFFECT_POS_IMPOSSIBLE (EB_RI | 0x09) +#define EB_RBUFFER_NOT_AVAILABLE (EB_RI | 0x0A) +#define EB_ALLOCATE_CONTEXT_LIII_IMPOSSIBLE (EB_RI | 0x0B) +#define EB_STATUS_DIALOG_IMPOSSIBLE (EB_RI | 0x1D) +#define EB_CONTROL_CMD_IMPOSSIBLE (EB_RI | 0x1E) +#define EB_STATUS_SEND_IMPOSSIBLE (EB_RI | 0x1F) +#define EB_ALLOCATE_PIPE_IMPOSSIBLE (EB_RI | 0x40) +#define EB_ALLOCATE_STREAM_IMPOSSIBLE (EB_RI | 0x80) +#define EB_ALLOCATE_AUDIO_IMPOSSIBLE (EB_RI | 0xC0) + +/* Complete BOARD error code for wrong call context class */ +#define EB_WCC (ERROR_VALUE | E_SOURCE_BOARD | E_CLASS_WRONG_CONTEXT) +#define EB_CMD_REFUSED (EB_WCC | 0x00) +#define EB_START_STREAM_REFUSED (EB_WCC | 0xFC) +#define EB_SPC_REFUSED (EB_WCC | 0xFD) +#define EB_CSN_REFUSED (EB_WCC | 0xFE) +#define EB_CSE_REFUSED (EB_WCC | 0xFF) + + + + +#endif /* LX_DEFS_H */ |