summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs/nau8825.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/soc/codecs/nau8825.c')
-rw-r--r--sound/soc/codecs/nau8825.c2976
1 files changed, 2976 insertions, 0 deletions
diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c
new file mode 100644
index 0000000000..5cb0de648b
--- /dev/null
+++ b/sound/soc/codecs/nau8825.c
@@ -0,0 +1,2976 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Nuvoton NAU8825 audio codec driver
+ *
+ * Copyright 2015 Google Chromium project.
+ * Author: Anatol Pomozov <anatol@chromium.org>
+ * Copyright 2015 Nuvoton Technology Corp.
+ * Co-author: Meng-Huang Kuo <mhkuo@nuvoton.com>
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/int_log.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/acpi.h>
+#include <linux/math64.h>
+#include <linux/semaphore.h>
+
+#include <sound/initval.h>
+#include <sound/tlv.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/jack.h>
+
+
+#include "nau8825.h"
+
+
+#define NUVOTON_CODEC_DAI "nau8825-hifi"
+
+#define NAU_FREF_MAX 13500000
+#define NAU_FVCO_MAX 124000000
+#define NAU_FVCO_MIN 90000000
+
+/* cross talk suppression detection */
+#define GAIN_AUGMENT 22500
+#define SIDETONE_BASE 207000
+
+/* the maximum frequency of CLK_ADC and CLK_DAC */
+#define CLK_DA_AD_MAX 6144000
+
+static int nau8825_configure_sysclk(struct nau8825 *nau8825,
+ int clk_id, unsigned int freq);
+static bool nau8825_is_jack_inserted(struct regmap *regmap);
+
+struct nau8825_fll {
+ int mclk_src;
+ int ratio;
+ int fll_frac;
+ int fll_frac_num;
+ int fll_int;
+ int clk_ref_div;
+};
+
+struct nau8825_fll_attr {
+ unsigned int param;
+ unsigned int val;
+};
+
+/* scaling for mclk from sysclk_src output */
+static const struct nau8825_fll_attr mclk_src_scaling[] = {
+ { 1, 0x0 },
+ { 2, 0x2 },
+ { 4, 0x3 },
+ { 8, 0x4 },
+ { 16, 0x5 },
+ { 32, 0x6 },
+ { 3, 0x7 },
+ { 6, 0xa },
+ { 12, 0xb },
+ { 24, 0xc },
+ { 48, 0xd },
+ { 96, 0xe },
+ { 5, 0xf },
+};
+
+/* ratio for input clk freq */
+static const struct nau8825_fll_attr fll_ratio[] = {
+ { 512000, 0x01 },
+ { 256000, 0x02 },
+ { 128000, 0x04 },
+ { 64000, 0x08 },
+ { 32000, 0x10 },
+ { 8000, 0x20 },
+ { 4000, 0x40 },
+};
+
+static const struct nau8825_fll_attr fll_pre_scalar[] = {
+ { 1, 0x0 },
+ { 2, 0x1 },
+ { 4, 0x2 },
+ { 8, 0x3 },
+};
+
+/* over sampling rate */
+struct nau8825_osr_attr {
+ unsigned int osr;
+ unsigned int clk_src;
+};
+
+static const struct nau8825_osr_attr osr_dac_sel[] = {
+ { 64, 2 }, /* OSR 64, SRC 1/4 */
+ { 256, 0 }, /* OSR 256, SRC 1 */
+ { 128, 1 }, /* OSR 128, SRC 1/2 */
+ { 0, 0 },
+ { 32, 3 }, /* OSR 32, SRC 1/8 */
+};
+
+static const struct nau8825_osr_attr osr_adc_sel[] = {
+ { 32, 3 }, /* OSR 32, SRC 1/8 */
+ { 64, 2 }, /* OSR 64, SRC 1/4 */
+ { 128, 1 }, /* OSR 128, SRC 1/2 */
+ { 256, 0 }, /* OSR 256, SRC 1 */
+};
+
+static const struct reg_default nau8825_reg_defaults[] = {
+ { NAU8825_REG_ENA_CTRL, 0x00ff },
+ { NAU8825_REG_IIC_ADDR_SET, 0x0 },
+ { NAU8825_REG_CLK_DIVIDER, 0x0050 },
+ { NAU8825_REG_FLL1, 0x0 },
+ { NAU8825_REG_FLL2, 0x3126 },
+ { NAU8825_REG_FLL3, 0x0008 },
+ { NAU8825_REG_FLL4, 0x0010 },
+ { NAU8825_REG_FLL5, 0x0 },
+ { NAU8825_REG_FLL6, 0x6000 },
+ { NAU8825_REG_FLL_VCO_RSV, 0xf13c },
+ { NAU8825_REG_HSD_CTRL, 0x000c },
+ { NAU8825_REG_JACK_DET_CTRL, 0x0 },
+ { NAU8825_REG_INTERRUPT_MASK, 0x0 },
+ { NAU8825_REG_INTERRUPT_DIS_CTRL, 0xffff },
+ { NAU8825_REG_SAR_CTRL, 0x0015 },
+ { NAU8825_REG_KEYDET_CTRL, 0x0110 },
+ { NAU8825_REG_VDET_THRESHOLD_1, 0x0 },
+ { NAU8825_REG_VDET_THRESHOLD_2, 0x0 },
+ { NAU8825_REG_VDET_THRESHOLD_3, 0x0 },
+ { NAU8825_REG_VDET_THRESHOLD_4, 0x0 },
+ { NAU8825_REG_GPIO34_CTRL, 0x0 },
+ { NAU8825_REG_GPIO12_CTRL, 0x0 },
+ { NAU8825_REG_TDM_CTRL, 0x0 },
+ { NAU8825_REG_I2S_PCM_CTRL1, 0x000b },
+ { NAU8825_REG_I2S_PCM_CTRL2, 0x8010 },
+ { NAU8825_REG_LEFT_TIME_SLOT, 0x0 },
+ { NAU8825_REG_RIGHT_TIME_SLOT, 0x0 },
+ { NAU8825_REG_BIQ_CTRL, 0x0 },
+ { NAU8825_REG_BIQ_COF1, 0x0 },
+ { NAU8825_REG_BIQ_COF2, 0x0 },
+ { NAU8825_REG_BIQ_COF3, 0x0 },
+ { NAU8825_REG_BIQ_COF4, 0x0 },
+ { NAU8825_REG_BIQ_COF5, 0x0 },
+ { NAU8825_REG_BIQ_COF6, 0x0 },
+ { NAU8825_REG_BIQ_COF7, 0x0 },
+ { NAU8825_REG_BIQ_COF8, 0x0 },
+ { NAU8825_REG_BIQ_COF9, 0x0 },
+ { NAU8825_REG_BIQ_COF10, 0x0 },
+ { NAU8825_REG_ADC_RATE, 0x0010 },
+ { NAU8825_REG_DAC_CTRL1, 0x0001 },
+ { NAU8825_REG_DAC_CTRL2, 0x0 },
+ { NAU8825_REG_DAC_DGAIN_CTRL, 0x0 },
+ { NAU8825_REG_ADC_DGAIN_CTRL, 0x00cf },
+ { NAU8825_REG_MUTE_CTRL, 0x0 },
+ { NAU8825_REG_HSVOL_CTRL, 0x0 },
+ { NAU8825_REG_DACL_CTRL, 0x02cf },
+ { NAU8825_REG_DACR_CTRL, 0x00cf },
+ { NAU8825_REG_ADC_DRC_KNEE_IP12, 0x1486 },
+ { NAU8825_REG_ADC_DRC_KNEE_IP34, 0x0f12 },
+ { NAU8825_REG_ADC_DRC_SLOPES, 0x25ff },
+ { NAU8825_REG_ADC_DRC_ATKDCY, 0x3457 },
+ { NAU8825_REG_DAC_DRC_KNEE_IP12, 0x1486 },
+ { NAU8825_REG_DAC_DRC_KNEE_IP34, 0x0f12 },
+ { NAU8825_REG_DAC_DRC_SLOPES, 0x25f9 },
+ { NAU8825_REG_DAC_DRC_ATKDCY, 0x3457 },
+ { NAU8825_REG_IMM_MODE_CTRL, 0x0 },
+ { NAU8825_REG_CLASSG_CTRL, 0x0 },
+ { NAU8825_REG_OPT_EFUSE_CTRL, 0x0 },
+ { NAU8825_REG_MISC_CTRL, 0x0 },
+ { NAU8825_REG_FLL2_LOWER, 0x0 },
+ { NAU8825_REG_FLL2_UPPER, 0x0 },
+ { NAU8825_REG_BIAS_ADJ, 0x0 },
+ { NAU8825_REG_TRIM_SETTINGS, 0x0 },
+ { NAU8825_REG_ANALOG_CONTROL_1, 0x0 },
+ { NAU8825_REG_ANALOG_CONTROL_2, 0x0 },
+ { NAU8825_REG_ANALOG_ADC_1, 0x0011 },
+ { NAU8825_REG_ANALOG_ADC_2, 0x0020 },
+ { NAU8825_REG_RDAC, 0x0008 },
+ { NAU8825_REG_MIC_BIAS, 0x0006 },
+ { NAU8825_REG_BOOST, 0x0 },
+ { NAU8825_REG_FEPGA, 0x0 },
+ { NAU8825_REG_POWER_UP_CONTROL, 0x0 },
+ { NAU8825_REG_CHARGE_PUMP, 0x0 },
+};
+
+/* register backup table when cross talk detection */
+static struct reg_default nau8825_xtalk_baktab[] = {
+ { NAU8825_REG_ADC_DGAIN_CTRL, 0x00cf },
+ { NAU8825_REG_HSVOL_CTRL, 0 },
+ { NAU8825_REG_DACL_CTRL, 0x00cf },
+ { NAU8825_REG_DACR_CTRL, 0x02cf },
+};
+
+/* The regmap patch for Rev C */
+static const struct reg_sequence nau8825_regmap_patch[] = {
+ { NAU8825_REG_FLL2, 0x0000 },
+ { NAU8825_REG_FLL4, 0x8010 },
+ { NAU8825_REG_FLL_VCO_RSV, 0x0bc0 },
+ { NAU8825_REG_INTERRUPT_MASK, 0x0800 },
+ { NAU8825_REG_DACL_CTRL, 0x00cf },
+ { NAU8825_REG_DACR_CTRL, 0x02cf },
+ { NAU8825_REG_OPT_EFUSE_CTRL, 0x0400 },
+ { NAU8825_REG_FLL2_LOWER, 0x26e9 },
+ { NAU8825_REG_FLL2_UPPER, 0x0031 },
+ { NAU8825_REG_ANALOG_CONTROL_2, 0x0020 },
+ { NAU8825_REG_ANALOG_ADC_2, 0x0220 },
+ { NAU8825_REG_MIC_BIAS, 0x0046 },
+};
+
+/**
+ * nau8825_sema_acquire - acquire the semaphore of nau88l25
+ * @nau8825: component to register the codec private data with
+ * @timeout: how long in jiffies to wait before failure or zero to wait
+ * until release
+ *
+ * Attempts to acquire the semaphore with number of jiffies. If no more
+ * tasks are allowed to acquire the semaphore, calling this function will
+ * put the task to sleep. If the semaphore is not released within the
+ * specified number of jiffies, this function returns.
+ * If the semaphore is not released within the specified number of jiffies,
+ * this function returns -ETIME. If the sleep is interrupted by a signal,
+ * this function will return -EINTR. It returns 0 if the semaphore was
+ * acquired successfully.
+ *
+ * Acquires the semaphore without jiffies. Try to acquire the semaphore
+ * atomically. Returns 0 if the semaphore has been acquired successfully
+ * or 1 if it cannot be acquired.
+ */
+static int nau8825_sema_acquire(struct nau8825 *nau8825, long timeout)
+{
+ int ret;
+
+ if (timeout) {
+ ret = down_timeout(&nau8825->xtalk_sem, timeout);
+ if (ret < 0)
+ dev_warn(nau8825->dev, "Acquire semaphore timeout\n");
+ } else {
+ ret = down_trylock(&nau8825->xtalk_sem);
+ if (ret)
+ dev_warn(nau8825->dev, "Acquire semaphore fail\n");
+ }
+
+ return ret;
+}
+
+/**
+ * nau8825_sema_release - release the semaphore of nau88l25
+ * @nau8825: component to register the codec private data with
+ *
+ * Release the semaphore which may be called from any context and
+ * even by tasks which have never called down().
+ */
+static inline void nau8825_sema_release(struct nau8825 *nau8825)
+{
+ up(&nau8825->xtalk_sem);
+}
+
+/**
+ * nau8825_sema_reset - reset the semaphore for nau88l25
+ * @nau8825: component to register the codec private data with
+ *
+ * Reset the counter of the semaphore. Call this function to restart
+ * a new round task management.
+ */
+static inline void nau8825_sema_reset(struct nau8825 *nau8825)
+{
+ nau8825->xtalk_sem.count = 1;
+}
+
+/**
+ * nau8825_hpvol_ramp - Ramp up the headphone volume change gradually to target level.
+ *
+ * @nau8825: component to register the codec private data with
+ * @vol_from: the volume to start up
+ * @vol_to: the target volume
+ * @step: the volume span to move on
+ *
+ * The headphone volume is from 0dB to minimum -54dB and -1dB per step.
+ * If the volume changes sharp, there is a pop noise heard in headphone. We
+ * provide the function to ramp up the volume up or down by delaying 10ms
+ * per step.
+ */
+static void nau8825_hpvol_ramp(struct nau8825 *nau8825,
+ unsigned int vol_from, unsigned int vol_to, unsigned int step)
+{
+ unsigned int value, volume, ramp_up, from, to;
+
+ if (vol_from == vol_to || step == 0) {
+ return;
+ } else if (vol_from < vol_to) {
+ ramp_up = true;
+ from = vol_from;
+ to = vol_to;
+ } else {
+ ramp_up = false;
+ from = vol_to;
+ to = vol_from;
+ }
+ /* only handle volume from 0dB to minimum -54dB */
+ if (to > NAU8825_HP_VOL_MIN)
+ to = NAU8825_HP_VOL_MIN;
+
+ for (volume = from; volume < to; volume += step) {
+ if (ramp_up)
+ value = volume;
+ else
+ value = to - volume + from;
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_HSVOL_CTRL,
+ NAU8825_HPL_VOL_MASK | NAU8825_HPR_VOL_MASK,
+ (value << NAU8825_HPL_VOL_SFT) | value);
+ usleep_range(10000, 10500);
+ }
+ if (ramp_up)
+ value = to;
+ else
+ value = from;
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_HSVOL_CTRL,
+ NAU8825_HPL_VOL_MASK | NAU8825_HPR_VOL_MASK,
+ (value << NAU8825_HPL_VOL_SFT) | value);
+}
+
+/**
+ * nau8825_intlog10_dec3 - Computes log10 of a value, rounding the result to 3 decimal places.
+ * @value: input for log10
+ *
+ * return log10(value) * 1000
+ */
+static u32 nau8825_intlog10_dec3(u32 value)
+{
+ return intlog10(value) / ((1 << 24) / 1000);
+}
+
+/**
+ * nau8825_xtalk_sidetone - computes cross talk suppression sidetone gain.
+ *
+ * @sig_org: orignal signal level
+ * @sig_cros: cross talk signal level
+ *
+ * The orignal and cross talk signal vlues need to be characterized.
+ * Once these values have been characterized, this sidetone value
+ * can be converted to decibel with the equation below.
+ * sidetone = 20 * log (original signal level / crosstalk signal level)
+ *
+ * return cross talk sidetone gain
+ */
+static u32 nau8825_xtalk_sidetone(u32 sig_org, u32 sig_cros)
+{
+ u32 gain, sidetone;
+
+ if (WARN_ON(sig_org == 0 || sig_cros == 0))
+ return 0;
+
+ sig_org = nau8825_intlog10_dec3(sig_org);
+ sig_cros = nau8825_intlog10_dec3(sig_cros);
+ if (sig_org >= sig_cros)
+ gain = (sig_org - sig_cros) * 20 + GAIN_AUGMENT;
+ else
+ gain = (sig_cros - sig_org) * 20 + GAIN_AUGMENT;
+ sidetone = SIDETONE_BASE - gain * 2;
+ sidetone /= 1000;
+
+ return sidetone;
+}
+
+static int nau8825_xtalk_baktab_index_by_reg(unsigned int reg)
+{
+ int index;
+
+ for (index = 0; index < ARRAY_SIZE(nau8825_xtalk_baktab); index++)
+ if (nau8825_xtalk_baktab[index].reg == reg)
+ return index;
+ return -EINVAL;
+}
+
+static void nau8825_xtalk_backup(struct nau8825 *nau8825)
+{
+ int i;
+
+ if (nau8825->xtalk_baktab_initialized)
+ return;
+
+ /* Backup some register values to backup table */
+ for (i = 0; i < ARRAY_SIZE(nau8825_xtalk_baktab); i++)
+ regmap_read(nau8825->regmap, nau8825_xtalk_baktab[i].reg,
+ &nau8825_xtalk_baktab[i].def);
+
+ nau8825->xtalk_baktab_initialized = true;
+}
+
+static void nau8825_xtalk_restore(struct nau8825 *nau8825, bool cause_cancel)
+{
+ int i, volume;
+
+ if (!nau8825->xtalk_baktab_initialized)
+ return;
+
+ /* Restore register values from backup table; When the driver restores
+ * the headphone volume in XTALK_DONE state, it needs recover to
+ * original level gradually with 3dB per step for less pop noise.
+ * Otherwise, the restore should do ASAP.
+ */
+ for (i = 0; i < ARRAY_SIZE(nau8825_xtalk_baktab); i++) {
+ if (!cause_cancel && nau8825_xtalk_baktab[i].reg ==
+ NAU8825_REG_HSVOL_CTRL) {
+ /* Ramping up the volume change to reduce pop noise */
+ volume = nau8825_xtalk_baktab[i].def &
+ NAU8825_HPR_VOL_MASK;
+ nau8825_hpvol_ramp(nau8825, 0, volume, 3);
+ continue;
+ }
+ regmap_write(nau8825->regmap, nau8825_xtalk_baktab[i].reg,
+ nau8825_xtalk_baktab[i].def);
+ }
+
+ nau8825->xtalk_baktab_initialized = false;
+}
+
+static void nau8825_xtalk_prepare_dac(struct nau8825 *nau8825)
+{
+ /* Enable power of DAC path */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_ENA_CTRL,
+ NAU8825_ENABLE_DACR | NAU8825_ENABLE_DACL |
+ NAU8825_ENABLE_ADC | NAU8825_ENABLE_ADC_CLK |
+ NAU8825_ENABLE_DAC_CLK, NAU8825_ENABLE_DACR |
+ NAU8825_ENABLE_DACL | NAU8825_ENABLE_ADC |
+ NAU8825_ENABLE_ADC_CLK | NAU8825_ENABLE_DAC_CLK);
+ /* Prevent startup click by letting charge pump to ramp up and
+ * change bump enable
+ */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
+ NAU8825_JAMNODCLOW | NAU8825_CHANRGE_PUMP_EN,
+ NAU8825_JAMNODCLOW | NAU8825_CHANRGE_PUMP_EN);
+ /* Enable clock sync of DAC and DAC clock */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_RDAC,
+ NAU8825_RDAC_EN | NAU8825_RDAC_CLK_EN |
+ NAU8825_RDAC_FS_BCLK_ENB,
+ NAU8825_RDAC_EN | NAU8825_RDAC_CLK_EN);
+ /* Power up output driver with 2 stage */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_POWER_UP_CONTROL,
+ NAU8825_POWERUP_INTEGR_R | NAU8825_POWERUP_INTEGR_L |
+ NAU8825_POWERUP_DRV_IN_R | NAU8825_POWERUP_DRV_IN_L,
+ NAU8825_POWERUP_INTEGR_R | NAU8825_POWERUP_INTEGR_L |
+ NAU8825_POWERUP_DRV_IN_R | NAU8825_POWERUP_DRV_IN_L);
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_POWER_UP_CONTROL,
+ NAU8825_POWERUP_HP_DRV_R | NAU8825_POWERUP_HP_DRV_L,
+ NAU8825_POWERUP_HP_DRV_R | NAU8825_POWERUP_HP_DRV_L);
+ /* HP outputs not shouted to ground */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_HSD_CTRL,
+ NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L, 0);
+ /* Enable HP boost driver */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_BOOST,
+ NAU8825_HP_BOOST_DIS, NAU8825_HP_BOOST_DIS);
+ /* Enable class G compare path to supply 1.8V or 0.9V. */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_CLASSG_CTRL,
+ NAU8825_CLASSG_LDAC_EN | NAU8825_CLASSG_RDAC_EN,
+ NAU8825_CLASSG_LDAC_EN | NAU8825_CLASSG_RDAC_EN);
+}
+
+static void nau8825_xtalk_prepare_adc(struct nau8825 *nau8825)
+{
+ /* Power up left ADC and raise 5dB than Vmid for Vref */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_ANALOG_ADC_2,
+ NAU8825_POWERUP_ADCL | NAU8825_ADC_VREFSEL_MASK,
+ NAU8825_POWERUP_ADCL | NAU8825_ADC_VREFSEL_VMID_PLUS_0_5DB);
+}
+
+static void nau8825_xtalk_clock(struct nau8825 *nau8825)
+{
+ /* Recover FLL default value */
+ regmap_write(nau8825->regmap, NAU8825_REG_FLL1, 0x0);
+ regmap_write(nau8825->regmap, NAU8825_REG_FLL2, 0x3126);
+ regmap_write(nau8825->regmap, NAU8825_REG_FLL3, 0x0008);
+ regmap_write(nau8825->regmap, NAU8825_REG_FLL4, 0x0010);
+ regmap_write(nau8825->regmap, NAU8825_REG_FLL5, 0x0);
+ regmap_write(nau8825->regmap, NAU8825_REG_FLL6, 0x6000);
+ /* Enable internal VCO clock for detection signal generated */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER,
+ NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_VCO);
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL6, NAU8825_DCO_EN,
+ NAU8825_DCO_EN);
+ /* Given specific clock frequency of internal clock to
+ * generate signal.
+ */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER,
+ NAU8825_CLK_MCLK_SRC_MASK, 0xf);
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL1,
+ NAU8825_FLL_RATIO_MASK, 0x10);
+}
+
+static void nau8825_xtalk_prepare(struct nau8825 *nau8825)
+{
+ int volume, index;
+
+ /* Backup those registers changed by cross talk detection */
+ nau8825_xtalk_backup(nau8825);
+ /* Config IIS as master to output signal by codec */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2,
+ NAU8825_I2S_MS_MASK | NAU8825_I2S_LRC_DIV_MASK |
+ NAU8825_I2S_BLK_DIV_MASK, NAU8825_I2S_MS_MASTER |
+ (0x2 << NAU8825_I2S_LRC_DIV_SFT) | 0x1);
+ /* Ramp up headphone volume to 0dB to get better performance and
+ * avoid pop noise in headphone.
+ */
+ index = nau8825_xtalk_baktab_index_by_reg(NAU8825_REG_HSVOL_CTRL);
+ if (index != -EINVAL) {
+ volume = nau8825_xtalk_baktab[index].def &
+ NAU8825_HPR_VOL_MASK;
+ nau8825_hpvol_ramp(nau8825, volume, 0, 3);
+ }
+ nau8825_xtalk_clock(nau8825);
+ nau8825_xtalk_prepare_dac(nau8825);
+ nau8825_xtalk_prepare_adc(nau8825);
+ /* Config channel path and digital gain */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_DACL_CTRL,
+ NAU8825_DACL_CH_SEL_MASK | NAU8825_DACL_CH_VOL_MASK,
+ NAU8825_DACL_CH_SEL_L | 0xab);
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_DACR_CTRL,
+ NAU8825_DACR_CH_SEL_MASK | NAU8825_DACR_CH_VOL_MASK,
+ NAU8825_DACR_CH_SEL_R | 0xab);
+ /* Config cross talk parameters and generate the 23Hz sine wave with
+ * 1/16 full scale of signal level for impedance measurement.
+ */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_IMM_MODE_CTRL,
+ NAU8825_IMM_THD_MASK | NAU8825_IMM_GEN_VOL_MASK |
+ NAU8825_IMM_CYC_MASK | NAU8825_IMM_DAC_SRC_MASK,
+ (0x9 << NAU8825_IMM_THD_SFT) | NAU8825_IMM_GEN_VOL_1_16th |
+ NAU8825_IMM_CYC_8192 | NAU8825_IMM_DAC_SRC_SIN);
+ /* RMS intrruption enable */
+ regmap_update_bits(nau8825->regmap,
+ NAU8825_REG_INTERRUPT_MASK, NAU8825_IRQ_RMS_EN, 0);
+ /* Power up left and right DAC */
+ if (nau8825->sw_id == NAU8825_SOFTWARE_ID_NAU8825)
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
+ NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, 0);
+ else
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
+ NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL,
+ NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL);
+}
+
+static void nau8825_xtalk_clean_dac(struct nau8825 *nau8825)
+{
+ /* Disable HP boost driver */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_BOOST,
+ NAU8825_HP_BOOST_DIS, 0);
+ /* HP outputs shouted to ground */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_HSD_CTRL,
+ NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L,
+ NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L);
+ /* Power down left and right DAC */
+ if (nau8825->sw_id == NAU8825_SOFTWARE_ID_NAU8825)
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
+ NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL,
+ NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL);
+ else
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
+ NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, 0);
+
+ /* Enable the TESTDAC and disable L/R HP impedance */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ,
+ NAU8825_BIAS_HPR_IMP | NAU8825_BIAS_HPL_IMP |
+ NAU8825_BIAS_TESTDAC_EN, NAU8825_BIAS_TESTDAC_EN);
+ /* Power down output driver with 2 stage */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_POWER_UP_CONTROL,
+ NAU8825_POWERUP_HP_DRV_R | NAU8825_POWERUP_HP_DRV_L, 0);
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_POWER_UP_CONTROL,
+ NAU8825_POWERUP_INTEGR_R | NAU8825_POWERUP_INTEGR_L |
+ NAU8825_POWERUP_DRV_IN_R | NAU8825_POWERUP_DRV_IN_L, 0);
+ /* Disable clock sync of DAC and DAC clock */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_RDAC,
+ NAU8825_RDAC_EN | NAU8825_RDAC_CLK_EN, 0);
+ /* Disable charge pump ramp up function and change bump */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
+ NAU8825_JAMNODCLOW | NAU8825_CHANRGE_PUMP_EN, 0);
+ /* Disable power of DAC path */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_ENA_CTRL,
+ NAU8825_ENABLE_DACR | NAU8825_ENABLE_DACL |
+ NAU8825_ENABLE_ADC_CLK | NAU8825_ENABLE_DAC_CLK, 0);
+ if (!nau8825->irq)
+ regmap_update_bits(nau8825->regmap,
+ NAU8825_REG_ENA_CTRL, NAU8825_ENABLE_ADC, 0);
+}
+
+static void nau8825_xtalk_clean_adc(struct nau8825 *nau8825)
+{
+ /* Power down left ADC and restore voltage to Vmid */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_ANALOG_ADC_2,
+ NAU8825_POWERUP_ADCL | NAU8825_ADC_VREFSEL_MASK, 0);
+}
+
+static void nau8825_xtalk_clean(struct nau8825 *nau8825, bool cause_cancel)
+{
+ /* Enable internal VCO needed for interruptions */
+ nau8825_configure_sysclk(nau8825, NAU8825_CLK_INTERNAL, 0);
+ nau8825_xtalk_clean_dac(nau8825);
+ nau8825_xtalk_clean_adc(nau8825);
+ /* Clear cross talk parameters and disable */
+ regmap_write(nau8825->regmap, NAU8825_REG_IMM_MODE_CTRL, 0);
+ /* RMS intrruption disable */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_INTERRUPT_MASK,
+ NAU8825_IRQ_RMS_EN, NAU8825_IRQ_RMS_EN);
+ /* Recover default value for IIS */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2,
+ NAU8825_I2S_MS_MASK | NAU8825_I2S_LRC_DIV_MASK |
+ NAU8825_I2S_BLK_DIV_MASK, NAU8825_I2S_MS_SLAVE);
+ /* Restore value of specific register for cross talk */
+ nau8825_xtalk_restore(nau8825, cause_cancel);
+}
+
+static void nau8825_xtalk_imm_start(struct nau8825 *nau8825, int vol)
+{
+ /* Apply ADC volume for better cross talk performance */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_ADC_DGAIN_CTRL,
+ NAU8825_ADC_DIG_VOL_MASK, vol);
+ /* Disables JKTIP(HPL) DAC channel for right to left measurement.
+ * Do it before sending signal in order to erase pop noise.
+ */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ,
+ NAU8825_BIAS_TESTDACR_EN | NAU8825_BIAS_TESTDACL_EN,
+ NAU8825_BIAS_TESTDACL_EN);
+ switch (nau8825->xtalk_state) {
+ case NAU8825_XTALK_HPR_R2L:
+ /* Enable right headphone impedance */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ,
+ NAU8825_BIAS_HPR_IMP | NAU8825_BIAS_HPL_IMP,
+ NAU8825_BIAS_HPR_IMP);
+ break;
+ case NAU8825_XTALK_HPL_R2L:
+ /* Enable left headphone impedance */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ,
+ NAU8825_BIAS_HPR_IMP | NAU8825_BIAS_HPL_IMP,
+ NAU8825_BIAS_HPL_IMP);
+ break;
+ default:
+ break;
+ }
+ msleep(100);
+ /* Impedance measurement mode enable */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_IMM_MODE_CTRL,
+ NAU8825_IMM_EN, NAU8825_IMM_EN);
+}
+
+static void nau8825_xtalk_imm_stop(struct nau8825 *nau8825)
+{
+ /* Impedance measurement mode disable */
+ regmap_update_bits(nau8825->regmap,
+ NAU8825_REG_IMM_MODE_CTRL, NAU8825_IMM_EN, 0);
+}
+
+/* The cross talk measurement function can reduce cross talk across the
+ * JKTIP(HPL) and JKR1(HPR) outputs which measures the cross talk signal
+ * level to determine what cross talk reduction gain is. This system works by
+ * sending a 23Hz -24dBV sine wave into the headset output DAC and through
+ * the PGA. The output of the PGA is then connected to an internal current
+ * sense which measures the attenuated 23Hz signal and passing the output to
+ * an ADC which converts the measurement to a binary code. With two separated
+ * measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data
+ * can be separated read in IMM_RMS_L for HSR and HSL after each measurement.
+ * Thus, the measurement function has four states to complete whole sequence.
+ * 1. Prepare state : Prepare the resource for detection and transfer to HPR
+ * IMM stat to make JKR1(HPR) impedance measure.
+ * 2. HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer
+ * to HPL IMM state to make JKTIP(HPL) impedance measure.
+ * 3. HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and
+ * transfer to IMM state to determine suppression sidetone gain.
+ * 4. IMM state : Computes cross talk suppression sidetone gain with orignal
+ * and cross talk signal level. Apply this gain and then restore codec
+ * configuration. Then transfer to Done state for ending.
+ */
+static void nau8825_xtalk_measure(struct nau8825 *nau8825)
+{
+ u32 sidetone;
+
+ switch (nau8825->xtalk_state) {
+ case NAU8825_XTALK_PREPARE:
+ /* In prepare state, set up clock, intrruption, DAC path, ADC
+ * path and cross talk detection parameters for preparation.
+ */
+ nau8825_xtalk_prepare(nau8825);
+ msleep(280);
+ /* Trigger right headphone impedance detection */
+ nau8825->xtalk_state = NAU8825_XTALK_HPR_R2L;
+ nau8825_xtalk_imm_start(nau8825, 0x00d2);
+ break;
+ case NAU8825_XTALK_HPR_R2L:
+ /* In right headphone IMM state, read out right headphone
+ * impedance measure result, and then start up left side.
+ */
+ regmap_read(nau8825->regmap, NAU8825_REG_IMM_RMS_L,
+ &nau8825->imp_rms[NAU8825_XTALK_HPR_R2L]);
+ dev_dbg(nau8825->dev, "HPR_R2L imm: %x\n",
+ nau8825->imp_rms[NAU8825_XTALK_HPR_R2L]);
+ /* Disable then re-enable IMM mode to update */
+ nau8825_xtalk_imm_stop(nau8825);
+ /* Trigger left headphone impedance detection */
+ nau8825->xtalk_state = NAU8825_XTALK_HPL_R2L;
+ nau8825_xtalk_imm_start(nau8825, 0x00ff);
+ break;
+ case NAU8825_XTALK_HPL_R2L:
+ /* In left headphone IMM state, read out left headphone
+ * impedance measure result, and delay some time to wait
+ * detection sine wave output finish. Then, we can calculate
+ * the cross talk suppresstion side tone according to the L/R
+ * headphone imedance.
+ */
+ regmap_read(nau8825->regmap, NAU8825_REG_IMM_RMS_L,
+ &nau8825->imp_rms[NAU8825_XTALK_HPL_R2L]);
+ dev_dbg(nau8825->dev, "HPL_R2L imm: %x\n",
+ nau8825->imp_rms[NAU8825_XTALK_HPL_R2L]);
+ nau8825_xtalk_imm_stop(nau8825);
+ msleep(150);
+ nau8825->xtalk_state = NAU8825_XTALK_IMM;
+ break;
+ case NAU8825_XTALK_IMM:
+ /* In impedance measure state, the orignal and cross talk
+ * signal level vlues are ready. The side tone gain is deter-
+ * mined with these signal level. After all, restore codec
+ * configuration.
+ */
+ sidetone = nau8825_xtalk_sidetone(
+ nau8825->imp_rms[NAU8825_XTALK_HPR_R2L],
+ nau8825->imp_rms[NAU8825_XTALK_HPL_R2L]);
+ dev_dbg(nau8825->dev, "cross talk sidetone: %x\n", sidetone);
+ regmap_write(nau8825->regmap, NAU8825_REG_DAC_DGAIN_CTRL,
+ (sidetone << 8) | sidetone);
+ nau8825_xtalk_clean(nau8825, false);
+ nau8825->xtalk_state = NAU8825_XTALK_DONE;
+ break;
+ default:
+ break;
+ }
+}
+
+static void nau8825_xtalk_work(struct work_struct *work)
+{
+ struct nau8825 *nau8825 = container_of(
+ work, struct nau8825, xtalk_work);
+
+ nau8825_xtalk_measure(nau8825);
+ /* To determine the cross talk side tone gain when reach
+ * the impedance measure state.
+ */
+ if (nau8825->xtalk_state == NAU8825_XTALK_IMM)
+ nau8825_xtalk_measure(nau8825);
+
+ /* Delay jack report until cross talk detection process
+ * completed. It can avoid application to do playback
+ * preparation before cross talk detection is still working.
+ * Meanwhile, the protection of the cross talk detection
+ * is released.
+ */
+ if (nau8825->xtalk_state == NAU8825_XTALK_DONE) {
+ snd_soc_jack_report(nau8825->jack, nau8825->xtalk_event,
+ nau8825->xtalk_event_mask);
+ nau8825_sema_release(nau8825);
+ nau8825->xtalk_protect = false;
+ }
+}
+
+static void nau8825_xtalk_cancel(struct nau8825 *nau8825)
+{
+ /* If the crosstalk is eanbled and the process is on going,
+ * the driver forces to cancel the crosstalk task and
+ * restores the configuration to original status.
+ */
+ if (nau8825->xtalk_enable && nau8825->xtalk_state !=
+ NAU8825_XTALK_DONE) {
+ cancel_work_sync(&nau8825->xtalk_work);
+ nau8825_xtalk_clean(nau8825, true);
+ }
+ /* Reset parameters for cross talk suppression function */
+ nau8825_sema_reset(nau8825);
+ nau8825->xtalk_state = NAU8825_XTALK_DONE;
+ nau8825->xtalk_protect = false;
+}
+
+static bool nau8825_readable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case NAU8825_REG_ENA_CTRL ... NAU8825_REG_FLL_VCO_RSV:
+ case NAU8825_REG_HSD_CTRL ... NAU8825_REG_JACK_DET_CTRL:
+ case NAU8825_REG_INTERRUPT_MASK ... NAU8825_REG_KEYDET_CTRL:
+ case NAU8825_REG_VDET_THRESHOLD_1 ... NAU8825_REG_DACR_CTRL:
+ case NAU8825_REG_ADC_DRC_KNEE_IP12 ... NAU8825_REG_ADC_DRC_ATKDCY:
+ case NAU8825_REG_DAC_DRC_KNEE_IP12 ... NAU8825_REG_DAC_DRC_ATKDCY:
+ case NAU8825_REG_IMM_MODE_CTRL ... NAU8825_REG_IMM_RMS_R:
+ case NAU8825_REG_CLASSG_CTRL ... NAU8825_REG_OPT_EFUSE_CTRL:
+ case NAU8825_REG_MISC_CTRL:
+ case NAU8825_REG_I2C_DEVICE_ID ... NAU8825_REG_FLL2_UPPER:
+ case NAU8825_REG_BIAS_ADJ:
+ case NAU8825_REG_TRIM_SETTINGS ... NAU8825_REG_ANALOG_CONTROL_2:
+ case NAU8825_REG_ANALOG_ADC_1 ... NAU8825_REG_MIC_BIAS:
+ case NAU8825_REG_BOOST ... NAU8825_REG_FEPGA:
+ case NAU8825_REG_POWER_UP_CONTROL ... NAU8825_REG_GENERAL_STATUS:
+ return true;
+ default:
+ return false;
+ }
+
+}
+
+static bool nau8825_writeable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case NAU8825_REG_RESET ... NAU8825_REG_FLL_VCO_RSV:
+ case NAU8825_REG_HSD_CTRL ... NAU8825_REG_JACK_DET_CTRL:
+ case NAU8825_REG_INTERRUPT_MASK:
+ case NAU8825_REG_INT_CLR_KEY_STATUS ... NAU8825_REG_KEYDET_CTRL:
+ case NAU8825_REG_VDET_THRESHOLD_1 ... NAU8825_REG_DACR_CTRL:
+ case NAU8825_REG_ADC_DRC_KNEE_IP12 ... NAU8825_REG_ADC_DRC_ATKDCY:
+ case NAU8825_REG_DAC_DRC_KNEE_IP12 ... NAU8825_REG_DAC_DRC_ATKDCY:
+ case NAU8825_REG_IMM_MODE_CTRL:
+ case NAU8825_REG_CLASSG_CTRL ... NAU8825_REG_OPT_EFUSE_CTRL:
+ case NAU8825_REG_MISC_CTRL:
+ case NAU8825_REG_FLL2_LOWER ... NAU8825_REG_FLL2_UPPER:
+ case NAU8825_REG_BIAS_ADJ:
+ case NAU8825_REG_TRIM_SETTINGS ... NAU8825_REG_ANALOG_CONTROL_2:
+ case NAU8825_REG_ANALOG_ADC_1 ... NAU8825_REG_MIC_BIAS:
+ case NAU8825_REG_BOOST ... NAU8825_REG_FEPGA:
+ case NAU8825_REG_POWER_UP_CONTROL ... NAU8825_REG_CHARGE_PUMP:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool nau8825_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case NAU8825_REG_RESET:
+ case NAU8825_REG_IRQ_STATUS:
+ case NAU8825_REG_INT_CLR_KEY_STATUS:
+ case NAU8825_REG_IMM_RMS_L:
+ case NAU8825_REG_IMM_RMS_R:
+ case NAU8825_REG_I2C_DEVICE_ID:
+ case NAU8825_REG_SARDOUT_RAM_STATUS:
+ case NAU8825_REG_CHARGE_PUMP_INPUT_READ:
+ case NAU8825_REG_GENERAL_STATUS:
+ case NAU8825_REG_BIQ_CTRL ... NAU8825_REG_BIQ_COF10:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static int nau8825_fepga_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
+ struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
+
+ switch (event) {
+ case SND_SOC_DAPM_POST_PMU:
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_FEPGA,
+ NAU8825_ACDC_CTRL_MASK,
+ NAU8825_ACDC_VREF_MICP | NAU8825_ACDC_VREF_MICN);
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_BOOST,
+ NAU8825_DISCHRG_EN, NAU8825_DISCHRG_EN);
+ msleep(40);
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_BOOST,
+ NAU8825_DISCHRG_EN, 0);
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_FEPGA,
+ NAU8825_ACDC_CTRL_MASK, 0);
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int nau8825_adc_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
+ struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
+
+ switch (event) {
+ case SND_SOC_DAPM_POST_PMU:
+ msleep(nau8825->adc_delay);
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_ENA_CTRL,
+ NAU8825_ENABLE_ADC, NAU8825_ENABLE_ADC);
+ break;
+ case SND_SOC_DAPM_POST_PMD:
+ if (!nau8825->irq)
+ regmap_update_bits(nau8825->regmap,
+ NAU8825_REG_ENA_CTRL, NAU8825_ENABLE_ADC, 0);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int nau8825_pump_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
+ struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
+
+ switch (event) {
+ case SND_SOC_DAPM_POST_PMU:
+ /* Prevent startup click by letting charge pump to ramp up */
+ msleep(10);
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
+ NAU8825_JAMNODCLOW, NAU8825_JAMNODCLOW);
+ break;
+ case SND_SOC_DAPM_PRE_PMD:
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
+ NAU8825_JAMNODCLOW, 0);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int nau8825_output_dac_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
+ struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
+
+ switch (event) {
+ case SND_SOC_DAPM_PRE_PMU:
+ /* Disables the TESTDAC to let DAC signal pass through. */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ,
+ NAU8825_BIAS_TESTDAC_EN, 0);
+ if (nau8825->sw_id == NAU8825_SOFTWARE_ID_NAU8825)
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
+ NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, 0);
+ else
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
+ NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL,
+ NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL);
+ break;
+ case SND_SOC_DAPM_POST_PMD:
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ,
+ NAU8825_BIAS_TESTDAC_EN, NAU8825_BIAS_TESTDAC_EN);
+ if (nau8825->sw_id == NAU8825_SOFTWARE_ID_NAU8825)
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
+ NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL,
+ NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL);
+ else
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP,
+ NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, 0);
+
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int system_clock_control(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *k, int event)
+{
+ struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
+ struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
+ struct regmap *regmap = nau8825->regmap;
+
+ if (SND_SOC_DAPM_EVENT_OFF(event)) {
+ dev_dbg(nau8825->dev, "system clock control : POWER OFF\n");
+ /* Set clock source to disable or internal clock before the
+ * playback or capture end. Codec needs clock for Jack
+ * detection and button press if jack inserted; otherwise,
+ * the clock should be closed.
+ */
+ if (nau8825_is_jack_inserted(regmap)) {
+ nau8825_configure_sysclk(nau8825,
+ NAU8825_CLK_INTERNAL, 0);
+ } else {
+ nau8825_configure_sysclk(nau8825, NAU8825_CLK_DIS, 0);
+ }
+ }
+
+ return 0;
+}
+
+static int nau8825_biq_coeff_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+ struct soc_bytes_ext *params = (void *)kcontrol->private_value;
+
+ if (!component->regmap)
+ return -EINVAL;
+
+ regmap_raw_read(component->regmap, NAU8825_REG_BIQ_COF1,
+ ucontrol->value.bytes.data, params->max);
+ return 0;
+}
+
+static int nau8825_biq_coeff_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
+ struct soc_bytes_ext *params = (void *)kcontrol->private_value;
+ void *data;
+
+ if (!component->regmap)
+ return -EINVAL;
+
+ data = kmemdup(ucontrol->value.bytes.data,
+ params->max, GFP_KERNEL | GFP_DMA);
+ if (!data)
+ return -ENOMEM;
+
+ regmap_update_bits(component->regmap, NAU8825_REG_BIQ_CTRL,
+ NAU8825_BIQ_WRT_EN, 0);
+ regmap_raw_write(component->regmap, NAU8825_REG_BIQ_COF1,
+ data, params->max);
+ regmap_update_bits(component->regmap, NAU8825_REG_BIQ_CTRL,
+ NAU8825_BIQ_WRT_EN, NAU8825_BIQ_WRT_EN);
+
+ kfree(data);
+ return 0;
+}
+
+static const char * const nau8825_biq_path[] = {
+ "ADC", "DAC"
+};
+
+static const struct soc_enum nau8825_biq_path_enum =
+ SOC_ENUM_SINGLE(NAU8825_REG_BIQ_CTRL, NAU8825_BIQ_PATH_SFT,
+ ARRAY_SIZE(nau8825_biq_path), nau8825_biq_path);
+
+static const char * const nau8825_adc_decimation[] = {
+ "32", "64", "128", "256"
+};
+
+static const struct soc_enum nau8825_adc_decimation_enum =
+ SOC_ENUM_SINGLE(NAU8825_REG_ADC_RATE, NAU8825_ADC_SYNC_DOWN_SFT,
+ ARRAY_SIZE(nau8825_adc_decimation), nau8825_adc_decimation);
+
+static const char * const nau8825_dac_oversampl[] = {
+ "64", "256", "128", "", "32"
+};
+
+static const struct soc_enum nau8825_dac_oversampl_enum =
+ SOC_ENUM_SINGLE(NAU8825_REG_DAC_CTRL1, NAU8825_DAC_OVERSAMPLE_SFT,
+ ARRAY_SIZE(nau8825_dac_oversampl), nau8825_dac_oversampl);
+
+static const DECLARE_TLV_DB_MINMAX_MUTE(adc_vol_tlv, -10300, 2400);
+static const DECLARE_TLV_DB_MINMAX_MUTE(sidetone_vol_tlv, -4200, 0);
+static const DECLARE_TLV_DB_MINMAX(dac_vol_tlv, -5400, 0);
+static const DECLARE_TLV_DB_MINMAX(fepga_gain_tlv, -100, 3600);
+static const DECLARE_TLV_DB_MINMAX_MUTE(crosstalk_vol_tlv, -9600, 2400);
+
+static const struct snd_kcontrol_new nau8825_controls[] = {
+ SOC_SINGLE_TLV("Mic Volume", NAU8825_REG_ADC_DGAIN_CTRL,
+ 0, 0xff, 0, adc_vol_tlv),
+ SOC_DOUBLE_TLV("Headphone Bypass Volume", NAU8825_REG_ADC_DGAIN_CTRL,
+ 12, 8, 0x0f, 0, sidetone_vol_tlv),
+ SOC_DOUBLE_TLV("Headphone Volume", NAU8825_REG_HSVOL_CTRL,
+ 6, 0, 0x3f, 1, dac_vol_tlv),
+ SOC_SINGLE_TLV("Frontend PGA Volume", NAU8825_REG_POWER_UP_CONTROL,
+ 8, 37, 0, fepga_gain_tlv),
+ SOC_DOUBLE_TLV("Headphone Crosstalk Volume", NAU8825_REG_DAC_DGAIN_CTRL,
+ 0, 8, 0xff, 0, crosstalk_vol_tlv),
+
+ SOC_ENUM("ADC Decimation Rate", nau8825_adc_decimation_enum),
+ SOC_ENUM("DAC Oversampling Rate", nau8825_dac_oversampl_enum),
+ /* programmable biquad filter */
+ SOC_ENUM("BIQ Path Select", nau8825_biq_path_enum),
+ SND_SOC_BYTES_EXT("BIQ Coefficients", 20,
+ nau8825_biq_coeff_get, nau8825_biq_coeff_put),
+};
+
+/* DAC Mux 0x33[9] and 0x34[9] */
+static const char * const nau8825_dac_src[] = {
+ "DACL", "DACR",
+};
+
+static SOC_ENUM_SINGLE_DECL(
+ nau8825_dacl_enum, NAU8825_REG_DACL_CTRL,
+ NAU8825_DACL_CH_SEL_SFT, nau8825_dac_src);
+
+static SOC_ENUM_SINGLE_DECL(
+ nau8825_dacr_enum, NAU8825_REG_DACR_CTRL,
+ NAU8825_DACR_CH_SEL_SFT, nau8825_dac_src);
+
+static const struct snd_kcontrol_new nau8825_dacl_mux =
+ SOC_DAPM_ENUM("DACL Source", nau8825_dacl_enum);
+
+static const struct snd_kcontrol_new nau8825_dacr_mux =
+ SOC_DAPM_ENUM("DACR Source", nau8825_dacr_enum);
+
+
+static const struct snd_soc_dapm_widget nau8825_dapm_widgets[] = {
+ SND_SOC_DAPM_AIF_OUT("AIFTX", "Capture", 0, NAU8825_REG_I2S_PCM_CTRL2,
+ 15, 1),
+ SND_SOC_DAPM_AIF_IN("AIFRX", "Playback", 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_SUPPLY("System Clock", SND_SOC_NOPM, 0, 0,
+ system_clock_control, SND_SOC_DAPM_POST_PMD),
+
+ SND_SOC_DAPM_INPUT("MIC"),
+ SND_SOC_DAPM_MICBIAS("MICBIAS", NAU8825_REG_MIC_BIAS, 8, 0),
+
+ SND_SOC_DAPM_PGA_E("Frontend PGA", NAU8825_REG_POWER_UP_CONTROL, 14, 0,
+ NULL, 0, nau8825_fepga_event, SND_SOC_DAPM_POST_PMU),
+
+ SND_SOC_DAPM_ADC_E("ADC", NULL, SND_SOC_NOPM, 0, 0,
+ nau8825_adc_event, SND_SOC_DAPM_POST_PMU |
+ SND_SOC_DAPM_POST_PMD),
+ SND_SOC_DAPM_SUPPLY("ADC Clock", NAU8825_REG_ENA_CTRL, 7, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("ADC Power", NAU8825_REG_ANALOG_ADC_2, 6, 0, NULL,
+ 0),
+
+ /* ADC for button press detection. A dapm supply widget is used to
+ * prevent dapm_power_widgets keeping the codec at SND_SOC_BIAS_ON
+ * during suspend.
+ */
+ SND_SOC_DAPM_SUPPLY("SAR", NAU8825_REG_SAR_CTRL,
+ NAU8825_SAR_ADC_EN_SFT, 0, NULL, 0),
+
+ SND_SOC_DAPM_PGA_S("ADACL", 2, NAU8825_REG_RDAC, 12, 0, NULL, 0),
+ SND_SOC_DAPM_PGA_S("ADACR", 2, NAU8825_REG_RDAC, 13, 0, NULL, 0),
+ SND_SOC_DAPM_PGA_S("ADACL Clock", 3, NAU8825_REG_RDAC, 8, 0, NULL, 0),
+ SND_SOC_DAPM_PGA_S("ADACR Clock", 3, NAU8825_REG_RDAC, 9, 0, NULL, 0),
+
+ SND_SOC_DAPM_DAC("DDACR", NULL, NAU8825_REG_ENA_CTRL,
+ NAU8825_ENABLE_DACR_SFT, 0),
+ SND_SOC_DAPM_DAC("DDACL", NULL, NAU8825_REG_ENA_CTRL,
+ NAU8825_ENABLE_DACL_SFT, 0),
+ SND_SOC_DAPM_SUPPLY("DDAC Clock", NAU8825_REG_ENA_CTRL, 6, 0, NULL, 0),
+
+ SND_SOC_DAPM_MUX("DACL Mux", SND_SOC_NOPM, 0, 0, &nau8825_dacl_mux),
+ SND_SOC_DAPM_MUX("DACR Mux", SND_SOC_NOPM, 0, 0, &nau8825_dacr_mux),
+
+ SND_SOC_DAPM_PGA_S("HP amp L", 0,
+ NAU8825_REG_CLASSG_CTRL, 1, 0, NULL, 0),
+ SND_SOC_DAPM_PGA_S("HP amp R", 0,
+ NAU8825_REG_CLASSG_CTRL, 2, 0, NULL, 0),
+
+ SND_SOC_DAPM_PGA_S("Charge Pump", 1, NAU8825_REG_CHARGE_PUMP, 5, 0,
+ nau8825_pump_event, SND_SOC_DAPM_POST_PMU |
+ SND_SOC_DAPM_PRE_PMD),
+
+ SND_SOC_DAPM_PGA_S("Output Driver R Stage 1", 4,
+ NAU8825_REG_POWER_UP_CONTROL, 5, 0, NULL, 0),
+ SND_SOC_DAPM_PGA_S("Output Driver L Stage 1", 4,
+ NAU8825_REG_POWER_UP_CONTROL, 4, 0, NULL, 0),
+ SND_SOC_DAPM_PGA_S("Output Driver R Stage 2", 5,
+ NAU8825_REG_POWER_UP_CONTROL, 3, 0, NULL, 0),
+ SND_SOC_DAPM_PGA_S("Output Driver L Stage 2", 5,
+ NAU8825_REG_POWER_UP_CONTROL, 2, 0, NULL, 0),
+ SND_SOC_DAPM_PGA_S("Output Driver R Stage 3", 6,
+ NAU8825_REG_POWER_UP_CONTROL, 1, 0, NULL, 0),
+ SND_SOC_DAPM_PGA_S("Output Driver L Stage 3", 6,
+ NAU8825_REG_POWER_UP_CONTROL, 0, 0, NULL, 0),
+
+ SND_SOC_DAPM_PGA_S("Output DACL", 7,
+ SND_SOC_NOPM, 0, 0, nau8825_output_dac_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+ SND_SOC_DAPM_PGA_S("Output DACR", 7,
+ SND_SOC_NOPM, 0, 0, nau8825_output_dac_event,
+ SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+
+
+ /* HPOL/R are ungrounded by disabling 16 Ohm pull-downs on playback */
+ SND_SOC_DAPM_PGA_S("HPOL Pulldown", 8,
+ NAU8825_REG_HSD_CTRL, 0, 1, NULL, 0),
+ SND_SOC_DAPM_PGA_S("HPOR Pulldown", 8,
+ NAU8825_REG_HSD_CTRL, 1, 1, NULL, 0),
+
+ /* High current HPOL/R boost driver */
+ SND_SOC_DAPM_PGA_S("HP Boost Driver", 9,
+ NAU8825_REG_BOOST, 9, 1, NULL, 0),
+
+ /* Class G operation control*/
+ SND_SOC_DAPM_PGA_S("Class G", 10,
+ NAU8825_REG_CLASSG_CTRL, 0, 0, NULL, 0),
+
+ SND_SOC_DAPM_OUTPUT("HPOL"),
+ SND_SOC_DAPM_OUTPUT("HPOR"),
+};
+
+static const struct snd_soc_dapm_route nau8825_dapm_routes[] = {
+ {"Frontend PGA", NULL, "MIC"},
+ {"ADC", NULL, "Frontend PGA"},
+ {"ADC", NULL, "ADC Clock"},
+ {"ADC", NULL, "ADC Power"},
+ {"AIFTX", NULL, "ADC"},
+ {"AIFTX", NULL, "System Clock"},
+
+ {"AIFRX", NULL, "System Clock"},
+ {"DDACL", NULL, "AIFRX"},
+ {"DDACR", NULL, "AIFRX"},
+ {"DDACL", NULL, "DDAC Clock"},
+ {"DDACR", NULL, "DDAC Clock"},
+ {"DACL Mux", "DACL", "DDACL"},
+ {"DACL Mux", "DACR", "DDACR"},
+ {"DACR Mux", "DACL", "DDACL"},
+ {"DACR Mux", "DACR", "DDACR"},
+ {"HP amp L", NULL, "DACL Mux"},
+ {"HP amp R", NULL, "DACR Mux"},
+ {"Charge Pump", NULL, "HP amp L"},
+ {"Charge Pump", NULL, "HP amp R"},
+ {"ADACL", NULL, "Charge Pump"},
+ {"ADACR", NULL, "Charge Pump"},
+ {"ADACL Clock", NULL, "ADACL"},
+ {"ADACR Clock", NULL, "ADACR"},
+ {"Output Driver L Stage 1", NULL, "ADACL Clock"},
+ {"Output Driver R Stage 1", NULL, "ADACR Clock"},
+ {"Output Driver L Stage 2", NULL, "Output Driver L Stage 1"},
+ {"Output Driver R Stage 2", NULL, "Output Driver R Stage 1"},
+ {"Output Driver L Stage 3", NULL, "Output Driver L Stage 2"},
+ {"Output Driver R Stage 3", NULL, "Output Driver R Stage 2"},
+ {"Output DACL", NULL, "Output Driver L Stage 3"},
+ {"Output DACR", NULL, "Output Driver R Stage 3"},
+ {"HPOL Pulldown", NULL, "Output DACL"},
+ {"HPOR Pulldown", NULL, "Output DACR"},
+ {"HP Boost Driver", NULL, "HPOL Pulldown"},
+ {"HP Boost Driver", NULL, "HPOR Pulldown"},
+ {"Class G", NULL, "HP Boost Driver"},
+ {"HPOL", NULL, "Class G"},
+ {"HPOR", NULL, "Class G"},
+};
+
+static const struct nau8825_osr_attr *
+nau8825_get_osr(struct nau8825 *nau8825, int stream)
+{
+ unsigned int osr;
+
+ if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ regmap_read(nau8825->regmap,
+ NAU8825_REG_DAC_CTRL1, &osr);
+ osr &= NAU8825_DAC_OVERSAMPLE_MASK;
+ if (osr >= ARRAY_SIZE(osr_dac_sel))
+ return NULL;
+ return &osr_dac_sel[osr];
+ } else {
+ regmap_read(nau8825->regmap,
+ NAU8825_REG_ADC_RATE, &osr);
+ osr &= NAU8825_ADC_SYNC_DOWN_MASK;
+ if (osr >= ARRAY_SIZE(osr_adc_sel))
+ return NULL;
+ return &osr_adc_sel[osr];
+ }
+}
+
+static int nau8825_dai_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_component *component = dai->component;
+ struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
+ const struct nau8825_osr_attr *osr;
+
+ osr = nau8825_get_osr(nau8825, substream->stream);
+ if (!osr || !osr->osr)
+ return -EINVAL;
+
+ return snd_pcm_hw_constraint_minmax(substream->runtime,
+ SNDRV_PCM_HW_PARAM_RATE,
+ 0, CLK_DA_AD_MAX / osr->osr);
+}
+
+static int nau8825_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_component *component = dai->component;
+ struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
+ unsigned int val_len = 0, ctrl_val, bclk_fs, bclk_div;
+ const struct nau8825_osr_attr *osr;
+ int err = -EINVAL;
+
+ nau8825_sema_acquire(nau8825, 3 * HZ);
+
+ /* CLK_DAC or CLK_ADC = OSR * FS
+ * DAC or ADC clock frequency is defined as Over Sampling Rate (OSR)
+ * multiplied by the audio sample rate (Fs). Note that the OSR and Fs
+ * values must be selected such that the maximum frequency is less
+ * than 6.144 MHz.
+ */
+ osr = nau8825_get_osr(nau8825, substream->stream);
+ if (!osr || !osr->osr)
+ goto error;
+ if (params_rate(params) * osr->osr > CLK_DA_AD_MAX)
+ goto error;
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER,
+ NAU8825_CLK_DAC_SRC_MASK,
+ osr->clk_src << NAU8825_CLK_DAC_SRC_SFT);
+ else
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER,
+ NAU8825_CLK_ADC_SRC_MASK,
+ osr->clk_src << NAU8825_CLK_ADC_SRC_SFT);
+
+ /* make BCLK and LRC divde configuration if the codec as master. */
+ regmap_read(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2, &ctrl_val);
+ if (ctrl_val & NAU8825_I2S_MS_MASTER) {
+ /* get the bclk and fs ratio */
+ bclk_fs = snd_soc_params_to_bclk(params) / params_rate(params);
+ if (bclk_fs <= 32)
+ bclk_div = 2;
+ else if (bclk_fs <= 64)
+ bclk_div = 1;
+ else if (bclk_fs <= 128)
+ bclk_div = 0;
+ else
+ goto error;
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2,
+ NAU8825_I2S_LRC_DIV_MASK | NAU8825_I2S_BLK_DIV_MASK,
+ ((bclk_div + 1) << NAU8825_I2S_LRC_DIV_SFT) | bclk_div);
+ }
+
+ switch (params_width(params)) {
+ case 16:
+ val_len |= NAU8825_I2S_DL_16;
+ break;
+ case 20:
+ val_len |= NAU8825_I2S_DL_20;
+ break;
+ case 24:
+ val_len |= NAU8825_I2S_DL_24;
+ break;
+ case 32:
+ val_len |= NAU8825_I2S_DL_32;
+ break;
+ default:
+ goto error;
+ }
+
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL1,
+ NAU8825_I2S_DL_MASK, val_len);
+ err = 0;
+
+ error:
+ /* Release the semaphore. */
+ nau8825_sema_release(nau8825);
+
+ return err;
+}
+
+static int nau8825_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
+{
+ struct snd_soc_component *component = codec_dai->component;
+ struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
+ unsigned int ctrl1_val = 0, ctrl2_val = 0;
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBM_CFM:
+ ctrl2_val |= NAU8825_I2S_MS_MASTER;
+ break;
+ case SND_SOC_DAIFMT_CBS_CFS:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ ctrl1_val |= NAU8825_I2S_BP_INV;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ ctrl1_val |= NAU8825_I2S_DF_I2S;
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ ctrl1_val |= NAU8825_I2S_DF_LEFT;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ ctrl1_val |= NAU8825_I2S_DF_RIGTH;
+ break;
+ case SND_SOC_DAIFMT_DSP_A:
+ ctrl1_val |= NAU8825_I2S_DF_PCM_AB;
+ break;
+ case SND_SOC_DAIFMT_DSP_B:
+ ctrl1_val |= NAU8825_I2S_DF_PCM_AB;
+ ctrl1_val |= NAU8825_I2S_PCMB_EN;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ nau8825_sema_acquire(nau8825, 3 * HZ);
+
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL1,
+ NAU8825_I2S_DL_MASK | NAU8825_I2S_DF_MASK |
+ NAU8825_I2S_BP_MASK | NAU8825_I2S_PCMB_MASK,
+ ctrl1_val);
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2,
+ NAU8825_I2S_MS_MASK, ctrl2_val);
+
+ /* Release the semaphore. */
+ nau8825_sema_release(nau8825);
+
+ return 0;
+}
+
+/**
+ * nau8825_set_tdm_slot - configure DAI TDM.
+ * @dai: DAI
+ * @tx_mask: bitmask representing active TX slots.
+ * @rx_mask: bitmask representing active RX slots.
+ * @slots: Number of slots in use.
+ * @slot_width: Width in bits for each slot.
+ *
+ * Configures a DAI for TDM operation. Support TDM 4/8 slots.
+ * The limitation is DAC and ADC need shift 4 slots at 8 slots mode.
+ */
+static int nau8825_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
+ unsigned int rx_mask, int slots, int slot_width)
+{
+ struct snd_soc_component *component = dai->component;
+ struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
+ unsigned int ctrl_val = 0, ctrl_offset = 0, value = 0, dac_s, adc_s;
+
+ if (slots != 4 && slots != 8) {
+ dev_err(nau8825->dev, "Only support 4 or 8 slots!\n");
+ return -EINVAL;
+ }
+
+ /* The driver is limited to 1-channel for ADC, and 2-channel for DAC on TDM mode */
+ if (hweight_long((unsigned long) tx_mask) != 1 ||
+ hweight_long((unsigned long) rx_mask) != 2) {
+ dev_err(nau8825->dev,
+ "The limitation is 1-channel for ADC, and 2-channel for DAC on TDM mode.\n");
+ return -EINVAL;
+ }
+
+ if (((tx_mask & 0xf) && (tx_mask & 0xf0)) ||
+ ((rx_mask & 0xf) && (rx_mask & 0xf0)) ||
+ ((tx_mask & 0xf) && (rx_mask & 0xf0)) ||
+ ((rx_mask & 0xf) && (tx_mask & 0xf0))) {
+ dev_err(nau8825->dev,
+ "Slot assignment of DAC and ADC need to set same interval.\n");
+ return -EINVAL;
+ }
+
+ /* The offset of fixed 4 slots for 8 slots support */
+ if (rx_mask & 0xf0) {
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2,
+ NAU8825_I2S_PCM_TS_EN_MASK, NAU8825_I2S_PCM_TS_EN);
+ regmap_read(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL1, &value);
+ ctrl_val |= NAU8825_TDM_OFFSET_EN;
+ ctrl_offset = 4 * slot_width;
+ if (!(value & NAU8825_I2S_PCMB_MASK))
+ ctrl_offset += 1;
+ dac_s = (rx_mask & 0xf0) >> 4;
+ adc_s = fls((tx_mask & 0xf0) >> 4);
+ } else {
+ dac_s = rx_mask & 0xf;
+ adc_s = fls(tx_mask & 0xf);
+ }
+
+ ctrl_val |= NAU8825_TDM_MODE;
+
+ switch (dac_s) {
+ case 0x3:
+ ctrl_val |= 1 << NAU8825_TDM_DACR_RX_SFT;
+ break;
+ case 0x5:
+ ctrl_val |= 2 << NAU8825_TDM_DACR_RX_SFT;
+ break;
+ case 0x6:
+ ctrl_val |= 1 << NAU8825_TDM_DACL_RX_SFT;
+ ctrl_val |= 2 << NAU8825_TDM_DACR_RX_SFT;
+ break;
+ case 0x9:
+ ctrl_val |= 3 << NAU8825_TDM_DACR_RX_SFT;
+ break;
+ case 0xa:
+ ctrl_val |= 1 << NAU8825_TDM_DACL_RX_SFT;
+ ctrl_val |= 3 << NAU8825_TDM_DACR_RX_SFT;
+ break;
+ case 0xc:
+ ctrl_val |= 2 << NAU8825_TDM_DACL_RX_SFT;
+ ctrl_val |= 3 << NAU8825_TDM_DACR_RX_SFT;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ctrl_val |= adc_s - 1;
+
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_TDM_CTRL,
+ NAU8825_TDM_MODE | NAU8825_TDM_OFFSET_EN |
+ NAU8825_TDM_DACL_RX_MASK | NAU8825_TDM_DACR_RX_MASK |
+ NAU8825_TDM_TX_MASK, ctrl_val);
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_LEFT_TIME_SLOT,
+ NAU8825_TSLOT_L0_MASK, ctrl_offset);
+
+ return 0;
+}
+
+static const struct snd_soc_dai_ops nau8825_dai_ops = {
+ .startup = nau8825_dai_startup,
+ .hw_params = nau8825_hw_params,
+ .set_fmt = nau8825_set_dai_fmt,
+ .set_tdm_slot = nau8825_set_tdm_slot,
+};
+
+#define NAU8825_RATES SNDRV_PCM_RATE_8000_192000
+#define NAU8825_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE \
+ | SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+static struct snd_soc_dai_driver nau8825_dai = {
+ .name = "nau8825-hifi",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = NAU8825_RATES,
+ .formats = NAU8825_FORMATS,
+ },
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = 2, /* Only 1 channel of data */
+ .rates = NAU8825_RATES,
+ .formats = NAU8825_FORMATS,
+ },
+ .ops = &nau8825_dai_ops,
+};
+
+/**
+ * nau8825_enable_jack_detect - Specify a jack for event reporting
+ *
+ * @component: component to register the jack with
+ * @jack: jack to use to report headset and button events on
+ *
+ * After this function has been called the headset insert/remove and button
+ * events will be routed to the given jack. Jack can be null to stop
+ * reporting.
+ */
+int nau8825_enable_jack_detect(struct snd_soc_component *component,
+ struct snd_soc_jack *jack)
+{
+ struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
+ struct regmap *regmap = nau8825->regmap;
+
+ nau8825->jack = jack;
+
+ if (!nau8825->jack) {
+ regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL,
+ NAU8825_HSD_AUTO_MODE | NAU8825_SPKR_DWN1R |
+ NAU8825_SPKR_DWN1L, 0);
+ return 0;
+ }
+ /* Ground HP Outputs[1:0], needed for headset auto detection
+ * Enable Automatic Mic/Gnd switching reading on insert interrupt[6]
+ */
+ regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL,
+ NAU8825_HSD_AUTO_MODE | NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L,
+ NAU8825_HSD_AUTO_MODE | NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(nau8825_enable_jack_detect);
+
+
+static bool nau8825_is_jack_inserted(struct regmap *regmap)
+{
+ bool active_high, is_high;
+ int status, jkdet;
+
+ regmap_read(regmap, NAU8825_REG_JACK_DET_CTRL, &jkdet);
+ active_high = jkdet & NAU8825_JACK_POLARITY;
+ regmap_read(regmap, NAU8825_REG_I2C_DEVICE_ID, &status);
+ is_high = status & NAU8825_GPIO2JD1;
+ /* return jack connection status according to jack insertion logic
+ * active high or active low.
+ */
+ return active_high == is_high;
+}
+
+static void nau8825_restart_jack_detection(struct regmap *regmap)
+{
+ /* this will restart the entire jack detection process including MIC/GND
+ * switching and create interrupts. We have to go from 0 to 1 and back
+ * to 0 to restart.
+ */
+ regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL,
+ NAU8825_JACK_DET_RESTART, NAU8825_JACK_DET_RESTART);
+ regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL,
+ NAU8825_JACK_DET_RESTART, 0);
+}
+
+static void nau8825_int_status_clear_all(struct regmap *regmap)
+{
+ int active_irq, clear_irq, i;
+
+ /* Reset the intrruption status from rightmost bit if the corres-
+ * ponding irq event occurs.
+ */
+ regmap_read(regmap, NAU8825_REG_IRQ_STATUS, &active_irq);
+ for (i = 0; i < NAU8825_REG_DATA_LEN; i++) {
+ clear_irq = (0x1 << i);
+ if (active_irq & clear_irq)
+ regmap_write(regmap,
+ NAU8825_REG_INT_CLR_KEY_STATUS, clear_irq);
+ }
+}
+
+static void nau8825_eject_jack(struct nau8825 *nau8825)
+{
+ struct snd_soc_dapm_context *dapm = nau8825->dapm;
+ struct regmap *regmap = nau8825->regmap;
+
+ /* Force to cancel the cross talk detection process */
+ nau8825_xtalk_cancel(nau8825);
+
+ snd_soc_dapm_disable_pin(dapm, "SAR");
+ snd_soc_dapm_disable_pin(dapm, "MICBIAS");
+ /* Detach 2kOhm Resistors from MICBIAS to MICGND1/2 */
+ regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS,
+ NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2, 0);
+ /* ground HPL/HPR, MICGRND1/2 */
+ regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL, 0xf, 0xf);
+
+ snd_soc_dapm_sync(dapm);
+
+ /* Clear all interruption status */
+ nau8825_int_status_clear_all(regmap);
+
+ /* Enable the insertion interruption, disable the ejection inter-
+ * ruption, and then bypass de-bounce circuit.
+ */
+ regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_DIS_CTRL,
+ NAU8825_IRQ_EJECT_DIS | NAU8825_IRQ_INSERT_DIS,
+ NAU8825_IRQ_EJECT_DIS);
+ regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK,
+ NAU8825_IRQ_OUTPUT_EN | NAU8825_IRQ_EJECT_EN |
+ NAU8825_IRQ_HEADSET_COMPLETE_EN | NAU8825_IRQ_INSERT_EN,
+ NAU8825_IRQ_OUTPUT_EN | NAU8825_IRQ_EJECT_EN |
+ NAU8825_IRQ_HEADSET_COMPLETE_EN);
+ regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL,
+ NAU8825_JACK_DET_DB_BYPASS, NAU8825_JACK_DET_DB_BYPASS);
+
+ /* Disable ADC needed for interruptions at audo mode */
+ regmap_update_bits(regmap, NAU8825_REG_ENA_CTRL,
+ NAU8825_ENABLE_ADC, 0);
+
+ /* Close clock for jack type detection at manual mode */
+ nau8825_configure_sysclk(nau8825, NAU8825_CLK_DIS, 0);
+}
+
+/* Enable audo mode interruptions with internal clock. */
+static void nau8825_setup_auto_irq(struct nau8825 *nau8825)
+{
+ struct regmap *regmap = nau8825->regmap;
+
+ /* Enable HSD function */
+ regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL,
+ NAU8825_HSD_AUTO_MODE, NAU8825_HSD_AUTO_MODE);
+
+ /* Enable headset jack type detection complete interruption and
+ * jack ejection interruption.
+ */
+ regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK,
+ NAU8825_IRQ_HEADSET_COMPLETE_EN | NAU8825_IRQ_EJECT_EN, 0);
+
+ /* Enable internal VCO needed for interruptions */
+ nau8825_configure_sysclk(nau8825, NAU8825_CLK_INTERNAL, 0);
+ /* Raise up the internal clock for jack detection */
+ regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER,
+ NAU8825_CLK_MCLK_SRC_MASK, 0);
+
+ /* Enable ADC needed for interruptions */
+ regmap_update_bits(regmap, NAU8825_REG_ENA_CTRL,
+ NAU8825_ENABLE_ADC, NAU8825_ENABLE_ADC);
+
+ /* Chip needs one FSCLK cycle in order to generate interruptions,
+ * as we cannot guarantee one will be provided by the system. Turning
+ * master mode on then off enables us to generate that FSCLK cycle
+ * with a minimum of contention on the clock bus.
+ */
+ regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2,
+ NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_MASTER);
+ regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2,
+ NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_SLAVE);
+
+ /* Not bypass de-bounce circuit */
+ regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL,
+ NAU8825_JACK_DET_DB_BYPASS, 0);
+
+ /* Unmask all interruptions */
+ regmap_write(regmap, NAU8825_REG_INTERRUPT_DIS_CTRL, 0);
+
+ /* Restart the jack detection process at auto mode */
+ nau8825_restart_jack_detection(regmap);
+}
+
+static int nau8825_button_decode(int value)
+{
+ int buttons = 0;
+
+ /* The chip supports up to 8 buttons, but ALSA defines only 6 buttons */
+ if (value & BIT(0))
+ buttons |= SND_JACK_BTN_0;
+ if (value & BIT(1))
+ buttons |= SND_JACK_BTN_1;
+ if (value & BIT(2))
+ buttons |= SND_JACK_BTN_2;
+ if (value & BIT(3))
+ buttons |= SND_JACK_BTN_3;
+ if (value & BIT(4))
+ buttons |= SND_JACK_BTN_4;
+ if (value & BIT(5))
+ buttons |= SND_JACK_BTN_5;
+
+ return buttons;
+}
+
+static int nau8825_high_imped_detection(struct nau8825 *nau8825)
+{
+ struct regmap *regmap = nau8825->regmap;
+ struct snd_soc_dapm_context *dapm = nau8825->dapm;
+ unsigned int adc_mg1, adc_mg2;
+
+ /* Initial phase */
+ regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL,
+ NAU8825_SPKR_ENGND1 | NAU8825_SPKR_ENGND2 | NAU8825_SPKR_DWN1R |
+ NAU8825_SPKR_DWN1L, NAU8825_SPKR_ENGND1 | NAU8825_SPKR_ENGND2);
+ regmap_update_bits(regmap, NAU8825_REG_ANALOG_CONTROL_1,
+ NAU8825_TESTDACIN_MASK, NAU8825_TESTDACIN_GND);
+ regmap_write(regmap, NAU8825_REG_TRIM_SETTINGS, 0x6);
+ regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS,
+ NAU8825_MICBIAS_LOWNOISE_MASK | NAU8825_MICBIAS_VOLTAGE_MASK,
+ NAU8825_MICBIAS_LOWNOISE_EN);
+ regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL,
+ NAU8825_SAR_INPUT_MASK | NAU8825_SAR_TRACKING_GAIN_MASK |
+ NAU8825_SAR_HV_SEL_MASK | NAU8825_SAR_RES_SEL_MASK |
+ NAU8825_SAR_COMPARE_TIME_MASK | NAU8825_SAR_SAMPLING_TIME_MASK,
+ NAU8825_SAR_HV_SEL_VDDMIC | NAU8825_SAR_RES_SEL_70K);
+
+ snd_soc_dapm_force_enable_pin(dapm, "MICBIAS");
+ snd_soc_dapm_force_enable_pin(dapm, "SAR");
+ snd_soc_dapm_sync(dapm);
+
+ /* Configure settings for first reading of SARADC */
+ regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL,
+ NAU8825_SPKR_ENGND1 | NAU8825_SPKR_ENGND2 | NAU8825_SPKR_DWN1R |
+ NAU8825_SPKR_DWN1L, NAU8825_SPKR_ENGND2);
+ regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS,
+ NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2,
+ NAU8825_MICBIAS_JKR2);
+ regmap_read(regmap, NAU8825_REG_SARDOUT_RAM_STATUS, &adc_mg1);
+
+ /* Configure settings for second reading of SARADC */
+ regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS,
+ NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2, 0);
+ regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL,
+ NAU8825_SPKR_ENGND1 | NAU8825_SPKR_ENGND2 | NAU8825_SPKR_DWN1R |
+ NAU8825_SPKR_DWN1L, NAU8825_SPKR_ENGND1 | NAU8825_SPKR_ENGND2 |
+ NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L);
+ regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL,
+ NAU8825_SPKR_ENGND1 | NAU8825_SPKR_ENGND2 | NAU8825_SPKR_DWN1R |
+ NAU8825_SPKR_DWN1L, NAU8825_SPKR_ENGND1);
+ regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS,
+ NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2,
+ NAU8825_MICBIAS_JKSLV);
+ regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL,
+ NAU8825_SAR_INPUT_MASK, NAU8825_SAR_INPUT_JKSLV);
+ regmap_read(regmap, NAU8825_REG_SARDOUT_RAM_STATUS, &adc_mg2);
+
+ /* Disable phase */
+ snd_soc_dapm_disable_pin(dapm, "SAR");
+ snd_soc_dapm_disable_pin(dapm, "MICBIAS");
+ snd_soc_dapm_sync(dapm);
+
+ regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS,
+ NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_LOWNOISE_MASK |
+ NAU8825_MICBIAS_VOLTAGE_MASK, nau8825->micbias_voltage);
+ regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL,
+ NAU8825_SPKR_ENGND1 | NAU8825_SPKR_ENGND2 | NAU8825_SPKR_DWN1R |
+ NAU8825_SPKR_DWN1L, NAU8825_SPKR_ENGND1 | NAU8825_SPKR_ENGND2 |
+ NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L);
+ regmap_update_bits(regmap, NAU8825_REG_ANALOG_CONTROL_1,
+ NAU8825_TESTDACIN_MASK, NAU8825_TESTDACIN_GND);
+ regmap_write(regmap, NAU8825_REG_TRIM_SETTINGS, 0);
+ regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL,
+ NAU8825_SAR_TRACKING_GAIN_MASK | NAU8825_SAR_HV_SEL_MASK,
+ nau8825->sar_voltage << NAU8825_SAR_TRACKING_GAIN_SFT);
+ regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL,
+ NAU8825_SAR_COMPARE_TIME_MASK | NAU8825_SAR_SAMPLING_TIME_MASK,
+ (nau8825->sar_compare_time << NAU8825_SAR_COMPARE_TIME_SFT) |
+ (nau8825->sar_sampling_time << NAU8825_SAR_SAMPLING_TIME_SFT));
+ dev_dbg(nau8825->dev, "adc_mg1:%x, adc_mg2:%x\n", adc_mg1, adc_mg2);
+
+ /* Confirmation phase */
+ if (adc_mg1 > adc_mg2) {
+ dev_dbg(nau8825->dev, "OMTP (micgnd1) mic connected\n");
+
+ /* Unground MICGND1 */
+ regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL,
+ NAU8825_SPKR_ENGND1 | NAU8825_SPKR_ENGND2,
+ NAU8825_SPKR_ENGND2);
+ /* Attach 2kOhm Resistor from MICBIAS to MICGND1 */
+ regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS,
+ NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2,
+ NAU8825_MICBIAS_JKR2);
+ /* Attach SARADC to MICGND1 */
+ regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL,
+ NAU8825_SAR_INPUT_MASK,
+ NAU8825_SAR_INPUT_JKR2);
+ } else if (adc_mg1 < adc_mg2) {
+ dev_dbg(nau8825->dev, "CTIA (micgnd2) mic connected\n");
+
+ /* Unground MICGND2 */
+ regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL,
+ NAU8825_SPKR_ENGND1 | NAU8825_SPKR_ENGND2,
+ NAU8825_SPKR_ENGND1);
+ /* Attach 2kOhm Resistor from MICBIAS to MICGND2 */
+ regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS,
+ NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2,
+ NAU8825_MICBIAS_JKSLV);
+ /* Attach SARADC to MICGND2 */
+ regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL,
+ NAU8825_SAR_INPUT_MASK,
+ NAU8825_SAR_INPUT_JKSLV);
+ } else {
+ dev_err(nau8825->dev, "Jack broken.\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int nau8825_jack_insert(struct nau8825 *nau8825)
+{
+ struct regmap *regmap = nau8825->regmap;
+ struct snd_soc_dapm_context *dapm = nau8825->dapm;
+ int jack_status_reg, mic_detected;
+ int type = 0;
+
+ regmap_read(regmap, NAU8825_REG_GENERAL_STATUS, &jack_status_reg);
+ mic_detected = (jack_status_reg >> 10) & 3;
+ /* The JKSLV and JKR2 all detected in high impedance headset */
+ if (mic_detected == 0x3)
+ nau8825->high_imped = true;
+ else
+ nau8825->high_imped = false;
+
+ switch (mic_detected) {
+ case 0:
+ /* no mic */
+ type = SND_JACK_HEADPHONE;
+ break;
+ case 1:
+ dev_dbg(nau8825->dev, "OMTP (micgnd1) mic connected\n");
+ type = SND_JACK_HEADSET;
+
+ /* Unground MICGND1 */
+ regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL, 3 << 2,
+ 1 << 2);
+ /* Attach 2kOhm Resistor from MICBIAS to MICGND1 */
+ regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS,
+ NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2,
+ NAU8825_MICBIAS_JKR2);
+ /* Attach SARADC to MICGND1 */
+ regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL,
+ NAU8825_SAR_INPUT_MASK,
+ NAU8825_SAR_INPUT_JKR2);
+
+ snd_soc_dapm_force_enable_pin(dapm, "MICBIAS");
+ snd_soc_dapm_force_enable_pin(dapm, "SAR");
+ snd_soc_dapm_sync(dapm);
+ break;
+ case 2:
+ dev_dbg(nau8825->dev, "CTIA (micgnd2) mic connected\n");
+ type = SND_JACK_HEADSET;
+
+ /* Unground MICGND2 */
+ regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL, 3 << 2,
+ 2 << 2);
+ /* Attach 2kOhm Resistor from MICBIAS to MICGND2 */
+ regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS,
+ NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2,
+ NAU8825_MICBIAS_JKSLV);
+ /* Attach SARADC to MICGND2 */
+ regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL,
+ NAU8825_SAR_INPUT_MASK,
+ NAU8825_SAR_INPUT_JKSLV);
+
+ snd_soc_dapm_force_enable_pin(dapm, "MICBIAS");
+ snd_soc_dapm_force_enable_pin(dapm, "SAR");
+ snd_soc_dapm_sync(dapm);
+ break;
+ case 3:
+ /* Detection failure case */
+ dev_warn(nau8825->dev,
+ "Detection failure. Try the manually mechanism for jack type checking.\n");
+ if (!nau8825_high_imped_detection(nau8825)) {
+ type = SND_JACK_HEADSET;
+ snd_soc_dapm_force_enable_pin(dapm, "MICBIAS");
+ snd_soc_dapm_force_enable_pin(dapm, "SAR");
+ snd_soc_dapm_sync(dapm);
+ } else
+ type = SND_JACK_HEADPHONE;
+ break;
+ }
+
+ /* Update to the default divider of internal clock for power saving */
+ regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER,
+ NAU8825_CLK_MCLK_SRC_MASK, 0xf);
+
+ /* Disable HSD function */
+ regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL, NAU8825_HSD_AUTO_MODE, 0);
+
+ /* Leaving HPOL/R grounded after jack insert by default. They will be
+ * ungrounded as part of the widget power up sequence at the beginning
+ * of playback to reduce pop.
+ */
+ return type;
+}
+
+#define NAU8825_BUTTONS (SND_JACK_BTN_0 | SND_JACK_BTN_1 | \
+ SND_JACK_BTN_2 | SND_JACK_BTN_3)
+
+static irqreturn_t nau8825_interrupt(int irq, void *data)
+{
+ struct nau8825 *nau8825 = (struct nau8825 *)data;
+ struct regmap *regmap = nau8825->regmap;
+ int active_irq, clear_irq = 0, event = 0, event_mask = 0;
+
+ if (regmap_read(regmap, NAU8825_REG_IRQ_STATUS, &active_irq)) {
+ dev_err(nau8825->dev, "failed to read irq status\n");
+ return IRQ_NONE;
+ }
+
+ if ((active_irq & NAU8825_JACK_EJECTION_IRQ_MASK) ==
+ NAU8825_JACK_EJECTION_DETECTED) {
+
+ nau8825_eject_jack(nau8825);
+ event_mask |= SND_JACK_HEADSET;
+ clear_irq = NAU8825_JACK_EJECTION_IRQ_MASK;
+ } else if (active_irq & NAU8825_KEY_SHORT_PRESS_IRQ) {
+ int key_status;
+
+ regmap_read(regmap, NAU8825_REG_INT_CLR_KEY_STATUS,
+ &key_status);
+
+ /* upper 8 bits of the register are for short pressed keys,
+ * lower 8 bits - for long pressed buttons
+ */
+ nau8825->button_pressed = nau8825_button_decode(
+ key_status >> 8);
+
+ event |= nau8825->button_pressed;
+ event_mask |= NAU8825_BUTTONS;
+ clear_irq = NAU8825_KEY_SHORT_PRESS_IRQ;
+ } else if (active_irq & NAU8825_KEY_RELEASE_IRQ) {
+ event_mask = NAU8825_BUTTONS;
+ clear_irq = NAU8825_KEY_RELEASE_IRQ;
+ } else if (active_irq & NAU8825_HEADSET_COMPLETION_IRQ) {
+ if (nau8825_is_jack_inserted(regmap)) {
+ event |= nau8825_jack_insert(nau8825);
+ if (nau8825->xtalk_enable && !nau8825->high_imped) {
+ /* Apply the cross talk suppression in the
+ * headset without high impedance.
+ */
+ if (!nau8825->xtalk_protect) {
+ /* Raise protection for cross talk de-
+ * tection if no protection before.
+ * The driver has to cancel the pro-
+ * cess and restore changes if process
+ * is ongoing when ejection.
+ */
+ int ret;
+ nau8825->xtalk_protect = true;
+ ret = nau8825_sema_acquire(nau8825, 0);
+ if (ret)
+ nau8825->xtalk_protect = false;
+ }
+ /* Startup cross talk detection process */
+ if (nau8825->xtalk_protect) {
+ nau8825->xtalk_state =
+ NAU8825_XTALK_PREPARE;
+ schedule_work(&nau8825->xtalk_work);
+ }
+ } else {
+ /* The cross talk suppression shouldn't apply
+ * in the headset with high impedance. Thus,
+ * relieve the protection raised before.
+ */
+ if (nau8825->xtalk_protect) {
+ nau8825_sema_release(nau8825);
+ nau8825->xtalk_protect = false;
+ }
+ }
+ } else {
+ dev_warn(nau8825->dev, "Headset completion IRQ fired but no headset connected\n");
+ nau8825_eject_jack(nau8825);
+ }
+
+ event_mask |= SND_JACK_HEADSET;
+ clear_irq = NAU8825_HEADSET_COMPLETION_IRQ;
+ /* Record the interruption report event for driver to report
+ * the event later. The jack report will delay until cross
+ * talk detection process is done.
+ */
+ if (nau8825->xtalk_state == NAU8825_XTALK_PREPARE) {
+ nau8825->xtalk_event = event;
+ nau8825->xtalk_event_mask = event_mask;
+ }
+ } else if (active_irq & NAU8825_IMPEDANCE_MEAS_IRQ) {
+ /* crosstalk detection enable and process on going */
+ if (nau8825->xtalk_enable && nau8825->xtalk_protect)
+ schedule_work(&nau8825->xtalk_work);
+ clear_irq = NAU8825_IMPEDANCE_MEAS_IRQ;
+ } else if ((active_irq & NAU8825_JACK_INSERTION_IRQ_MASK) ==
+ NAU8825_JACK_INSERTION_DETECTED) {
+ /* One more step to check GPIO status directly. Thus, the
+ * driver can confirm the real insertion interruption because
+ * the intrruption at manual mode has bypassed debounce
+ * circuit which can get rid of unstable status.
+ */
+ if (nau8825_is_jack_inserted(regmap)) {
+ /* Turn off insertion interruption at manual mode */
+ regmap_update_bits(regmap,
+ NAU8825_REG_INTERRUPT_DIS_CTRL,
+ NAU8825_IRQ_INSERT_DIS,
+ NAU8825_IRQ_INSERT_DIS);
+ regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK,
+ NAU8825_IRQ_INSERT_EN, NAU8825_IRQ_INSERT_EN);
+ /* Enable interruption for jack type detection at audo
+ * mode which can detect microphone and jack type.
+ */
+ nau8825_setup_auto_irq(nau8825);
+ }
+ }
+
+ if (!clear_irq)
+ clear_irq = active_irq;
+ /* clears the rightmost interruption */
+ regmap_write(regmap, NAU8825_REG_INT_CLR_KEY_STATUS, clear_irq);
+
+ /* Delay jack report until cross talk detection is done. It can avoid
+ * application to do playback preparation when cross talk detection
+ * process is still working. Otherwise, the resource like clock and
+ * power will be issued by them at the same time and conflict happens.
+ */
+ if (event_mask && nau8825->xtalk_state == NAU8825_XTALK_DONE)
+ snd_soc_jack_report(nau8825->jack, event, event_mask);
+
+ return IRQ_HANDLED;
+}
+
+static void nau8825_setup_buttons(struct nau8825 *nau8825)
+{
+ struct regmap *regmap = nau8825->regmap;
+
+ regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL,
+ NAU8825_SAR_TRACKING_GAIN_MASK,
+ nau8825->sar_voltage << NAU8825_SAR_TRACKING_GAIN_SFT);
+ regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL,
+ NAU8825_SAR_COMPARE_TIME_MASK,
+ nau8825->sar_compare_time << NAU8825_SAR_COMPARE_TIME_SFT);
+ regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL,
+ NAU8825_SAR_SAMPLING_TIME_MASK,
+ nau8825->sar_sampling_time << NAU8825_SAR_SAMPLING_TIME_SFT);
+
+ regmap_update_bits(regmap, NAU8825_REG_KEYDET_CTRL,
+ NAU8825_KEYDET_LEVELS_NR_MASK,
+ (nau8825->sar_threshold_num - 1) << NAU8825_KEYDET_LEVELS_NR_SFT);
+ regmap_update_bits(regmap, NAU8825_REG_KEYDET_CTRL,
+ NAU8825_KEYDET_HYSTERESIS_MASK,
+ nau8825->sar_hysteresis << NAU8825_KEYDET_HYSTERESIS_SFT);
+ regmap_update_bits(regmap, NAU8825_REG_KEYDET_CTRL,
+ NAU8825_KEYDET_SHORTKEY_DEBOUNCE_MASK,
+ nau8825->key_debounce << NAU8825_KEYDET_SHORTKEY_DEBOUNCE_SFT);
+
+ regmap_write(regmap, NAU8825_REG_VDET_THRESHOLD_1,
+ (nau8825->sar_threshold[0] << 8) | nau8825->sar_threshold[1]);
+ regmap_write(regmap, NAU8825_REG_VDET_THRESHOLD_2,
+ (nau8825->sar_threshold[2] << 8) | nau8825->sar_threshold[3]);
+ regmap_write(regmap, NAU8825_REG_VDET_THRESHOLD_3,
+ (nau8825->sar_threshold[4] << 8) | nau8825->sar_threshold[5]);
+ regmap_write(regmap, NAU8825_REG_VDET_THRESHOLD_4,
+ (nau8825->sar_threshold[6] << 8) | nau8825->sar_threshold[7]);
+
+ /* Enable short press and release interruptions */
+ regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK,
+ NAU8825_IRQ_KEY_SHORT_PRESS_EN | NAU8825_IRQ_KEY_RELEASE_EN,
+ 0);
+}
+
+static void nau8825_init_regs(struct nau8825 *nau8825)
+{
+ struct regmap *regmap = nau8825->regmap;
+
+ /* Latch IIC LSB value */
+ regmap_write(regmap, NAU8825_REG_IIC_ADDR_SET, 0x0001);
+ /* Enable Bias/Vmid */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ,
+ NAU8825_BIAS_VMID, NAU8825_BIAS_VMID);
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_BOOST,
+ NAU8825_GLOBAL_BIAS_EN, NAU8825_GLOBAL_BIAS_EN);
+
+ /* VMID Tieoff */
+ regmap_update_bits(regmap, NAU8825_REG_BIAS_ADJ,
+ NAU8825_BIAS_VMID_SEL_MASK,
+ nau8825->vref_impedance << NAU8825_BIAS_VMID_SEL_SFT);
+ /* Disable Boost Driver, Automatic Short circuit protection enable */
+ regmap_update_bits(regmap, NAU8825_REG_BOOST,
+ NAU8825_PRECHARGE_DIS | NAU8825_HP_BOOST_DIS |
+ NAU8825_HP_BOOST_G_DIS | NAU8825_SHORT_SHUTDOWN_EN,
+ NAU8825_PRECHARGE_DIS | NAU8825_HP_BOOST_DIS |
+ NAU8825_HP_BOOST_G_DIS | NAU8825_SHORT_SHUTDOWN_EN);
+
+ regmap_update_bits(regmap, NAU8825_REG_GPIO12_CTRL,
+ NAU8825_JKDET_OUTPUT_EN,
+ nau8825->jkdet_enable ? 0 : NAU8825_JKDET_OUTPUT_EN);
+ regmap_update_bits(regmap, NAU8825_REG_GPIO12_CTRL,
+ NAU8825_JKDET_PULL_EN,
+ nau8825->jkdet_pull_enable ? 0 : NAU8825_JKDET_PULL_EN);
+ regmap_update_bits(regmap, NAU8825_REG_GPIO12_CTRL,
+ NAU8825_JKDET_PULL_UP,
+ nau8825->jkdet_pull_up ? NAU8825_JKDET_PULL_UP : 0);
+ regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL,
+ NAU8825_JACK_POLARITY,
+ /* jkdet_polarity - 1 is for active-low */
+ nau8825->jkdet_polarity ? 0 : NAU8825_JACK_POLARITY);
+
+ regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL,
+ NAU8825_JACK_INSERT_DEBOUNCE_MASK,
+ nau8825->jack_insert_debounce << NAU8825_JACK_INSERT_DEBOUNCE_SFT);
+ regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL,
+ NAU8825_JACK_EJECT_DEBOUNCE_MASK,
+ nau8825->jack_eject_debounce << NAU8825_JACK_EJECT_DEBOUNCE_SFT);
+
+ /* Pull up IRQ pin */
+ regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK,
+ NAU8825_IRQ_PIN_PULLUP | NAU8825_IRQ_PIN_PULL_EN,
+ NAU8825_IRQ_PIN_PULLUP | NAU8825_IRQ_PIN_PULL_EN);
+ /* Mask unneeded IRQs: 1 - disable, 0 - enable */
+ regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, 0x7ff, 0x7ff);
+
+ regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS,
+ NAU8825_MICBIAS_VOLTAGE_MASK, nau8825->micbias_voltage);
+
+ if (nau8825->sar_threshold_num)
+ nau8825_setup_buttons(nau8825);
+
+ /* Default oversampling/decimations settings are unusable
+ * (audible hiss). Set it to something better.
+ */
+ regmap_update_bits(regmap, NAU8825_REG_ADC_RATE,
+ NAU8825_ADC_SYNC_DOWN_MASK | NAU8825_ADC_SINC4_EN,
+ NAU8825_ADC_SYNC_DOWN_64);
+ regmap_update_bits(regmap, NAU8825_REG_DAC_CTRL1,
+ NAU8825_DAC_OVERSAMPLE_MASK, NAU8825_DAC_OVERSAMPLE_64);
+ /* Disable DACR/L power */
+ if (nau8825->sw_id == NAU8825_SOFTWARE_ID_NAU8825)
+ regmap_update_bits(regmap, NAU8825_REG_CHARGE_PUMP,
+ NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL,
+ NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL);
+ /* Enable TESTDAC. This sets the analog DAC inputs to a '0' input
+ * signal to avoid any glitches due to power up transients in both
+ * the analog and digital DAC circuit.
+ */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ,
+ NAU8825_BIAS_TESTDAC_EN, NAU8825_BIAS_TESTDAC_EN);
+ /* CICCLP off */
+ regmap_update_bits(regmap, NAU8825_REG_DAC_CTRL1,
+ NAU8825_DAC_CLIP_OFF, NAU8825_DAC_CLIP_OFF);
+
+ /* Class AB bias current to 2x, DAC Capacitor enable MSB/LSB */
+ regmap_update_bits(regmap, NAU8825_REG_ANALOG_CONTROL_2,
+ NAU8825_HP_NON_CLASSG_CURRENT_2xADJ |
+ NAU8825_DAC_CAPACITOR_MSB | NAU8825_DAC_CAPACITOR_LSB,
+ NAU8825_HP_NON_CLASSG_CURRENT_2xADJ |
+ NAU8825_DAC_CAPACITOR_MSB | NAU8825_DAC_CAPACITOR_LSB);
+ /* Class G timer 64ms */
+ regmap_update_bits(regmap, NAU8825_REG_CLASSG_CTRL,
+ NAU8825_CLASSG_TIMER_MASK,
+ 0x20 << NAU8825_CLASSG_TIMER_SFT);
+ /* DAC clock delay 2ns, VREF */
+ regmap_update_bits(regmap, NAU8825_REG_RDAC,
+ NAU8825_RDAC_CLK_DELAY_MASK | NAU8825_RDAC_VREF_MASK,
+ (0x2 << NAU8825_RDAC_CLK_DELAY_SFT) |
+ (0x3 << NAU8825_RDAC_VREF_SFT));
+ /* Config L/R channel */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_DACL_CTRL,
+ NAU8825_DACL_CH_SEL_MASK, NAU8825_DACL_CH_SEL_L);
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_DACR_CTRL,
+ NAU8825_DACL_CH_SEL_MASK, NAU8825_DACL_CH_SEL_R);
+ /* Disable short Frame Sync detection logic */
+ regmap_update_bits(regmap, NAU8825_REG_LEFT_TIME_SLOT,
+ NAU8825_DIS_FS_SHORT_DET, NAU8825_DIS_FS_SHORT_DET);
+ /* ADCDAT IO drive strength control */
+ regmap_update_bits(regmap, NAU8825_REG_CHARGE_PUMP,
+ NAU8825_ADCOUT_DS_MASK,
+ nau8825->adcout_ds << NAU8825_ADCOUT_DS_SFT);
+}
+
+static const struct regmap_config nau8825_regmap_config = {
+ .val_bits = NAU8825_REG_DATA_LEN,
+ .reg_bits = NAU8825_REG_ADDR_LEN,
+
+ .max_register = NAU8825_REG_MAX,
+ .readable_reg = nau8825_readable_reg,
+ .writeable_reg = nau8825_writeable_reg,
+ .volatile_reg = nau8825_volatile_reg,
+
+ .cache_type = REGCACHE_RBTREE,
+ .reg_defaults = nau8825_reg_defaults,
+ .num_reg_defaults = ARRAY_SIZE(nau8825_reg_defaults),
+};
+
+static int nau8825_component_probe(struct snd_soc_component *component)
+{
+ struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
+ struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
+
+ nau8825->dapm = dapm;
+
+ return 0;
+}
+
+static void nau8825_component_remove(struct snd_soc_component *component)
+{
+ struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
+
+ /* Cancel and reset cross tak suppresstion detection funciton */
+ nau8825_xtalk_cancel(nau8825);
+}
+
+/**
+ * nau8825_calc_fll_param - Calculate FLL parameters.
+ * @fll_in: external clock provided to codec.
+ * @fs: sampling rate.
+ * @fll_param: Pointer to structure of FLL parameters.
+ *
+ * Calculate FLL parameters to configure codec.
+ *
+ * Returns 0 for success or negative error code.
+ */
+static int nau8825_calc_fll_param(unsigned int fll_in, unsigned int fs,
+ struct nau8825_fll *fll_param)
+{
+ u64 fvco, fvco_max;
+ unsigned int fref, i, fvco_sel;
+
+ /* Ensure the reference clock frequency (FREF) is <= 13.5MHz by dividing
+ * freq_in by 1, 2, 4, or 8 using FLL pre-scalar.
+ * FREF = freq_in / NAU8825_FLL_REF_DIV_MASK
+ */
+ for (i = 0; i < ARRAY_SIZE(fll_pre_scalar); i++) {
+ fref = fll_in / fll_pre_scalar[i].param;
+ if (fref <= NAU_FREF_MAX)
+ break;
+ }
+ if (i == ARRAY_SIZE(fll_pre_scalar))
+ return -EINVAL;
+ fll_param->clk_ref_div = fll_pre_scalar[i].val;
+
+ /* Choose the FLL ratio based on FREF */
+ for (i = 0; i < ARRAY_SIZE(fll_ratio); i++) {
+ if (fref >= fll_ratio[i].param)
+ break;
+ }
+ if (i == ARRAY_SIZE(fll_ratio))
+ return -EINVAL;
+ fll_param->ratio = fll_ratio[i].val;
+
+ /* Calculate the frequency of DCO (FDCO) given freq_out = 256 * Fs.
+ * FDCO must be within the 90MHz - 124MHz or the FFL cannot be
+ * guaranteed across the full range of operation.
+ * FDCO = freq_out * 2 * mclk_src_scaling
+ */
+ fvco_max = 0;
+ fvco_sel = ARRAY_SIZE(mclk_src_scaling);
+ for (i = 0; i < ARRAY_SIZE(mclk_src_scaling); i++) {
+ fvco = 256ULL * fs * 2 * mclk_src_scaling[i].param;
+ if (fvco > NAU_FVCO_MIN && fvco < NAU_FVCO_MAX &&
+ fvco_max < fvco) {
+ fvco_max = fvco;
+ fvco_sel = i;
+ }
+ }
+ if (ARRAY_SIZE(mclk_src_scaling) == fvco_sel)
+ return -EINVAL;
+ fll_param->mclk_src = mclk_src_scaling[fvco_sel].val;
+
+ /* Calculate the FLL 10-bit integer input and the FLL 16-bit fractional
+ * input based on FDCO, FREF and FLL ratio.
+ */
+ fvco = div_u64(fvco_max << fll_param->fll_frac_num, fref * fll_param->ratio);
+ fll_param->fll_int = (fvco >> fll_param->fll_frac_num) & 0x3FF;
+ if (fll_param->fll_frac_num == 16)
+ fll_param->fll_frac = fvco & 0xFFFF;
+ else
+ fll_param->fll_frac = fvco & 0xFFFFFF;
+ return 0;
+}
+
+static void nau8825_fll_apply(struct nau8825 *nau8825,
+ struct nau8825_fll *fll_param)
+{
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER,
+ NAU8825_CLK_SRC_MASK | NAU8825_CLK_MCLK_SRC_MASK,
+ NAU8825_CLK_SRC_MCLK | fll_param->mclk_src);
+ /* Make DSP operate at high speed for better performance. */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL1,
+ NAU8825_FLL_RATIO_MASK | NAU8825_ICTRL_LATCH_MASK,
+ fll_param->ratio | (0x6 << NAU8825_ICTRL_LATCH_SFT));
+ /* FLL 16/24 bit fractional input */
+ if (fll_param->fll_frac_num == 16)
+ regmap_write(nau8825->regmap, NAU8825_REG_FLL2,
+ fll_param->fll_frac);
+ else {
+ regmap_write(nau8825->regmap, NAU8825_REG_FLL2_LOWER,
+ fll_param->fll_frac & 0xffff);
+ regmap_write(nau8825->regmap, NAU8825_REG_FLL2_UPPER,
+ (fll_param->fll_frac >> 16) & 0xff);
+ }
+ /* FLL 10-bit integer input */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL3,
+ NAU8825_FLL_INTEGER_MASK, fll_param->fll_int);
+ /* FLL pre-scaler */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL4,
+ NAU8825_FLL_REF_DIV_MASK,
+ fll_param->clk_ref_div << NAU8825_FLL_REF_DIV_SFT);
+ /* select divided VCO input */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL5,
+ NAU8825_FLL_CLK_SW_MASK, NAU8825_FLL_CLK_SW_REF);
+ /* Disable free-running mode */
+ regmap_update_bits(nau8825->regmap,
+ NAU8825_REG_FLL6, NAU8825_DCO_EN, 0);
+ if (fll_param->fll_frac) {
+ /* set FLL loop filter enable and cutoff frequency at 500Khz */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL5,
+ NAU8825_FLL_PDB_DAC_EN | NAU8825_FLL_LOOP_FTR_EN |
+ NAU8825_FLL_FTR_SW_MASK,
+ NAU8825_FLL_PDB_DAC_EN | NAU8825_FLL_LOOP_FTR_EN |
+ NAU8825_FLL_FTR_SW_FILTER);
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL6,
+ NAU8825_SDM_EN | NAU8825_CUTOFF500,
+ NAU8825_SDM_EN | NAU8825_CUTOFF500);
+ } else {
+ /* disable FLL loop filter and cutoff frequency */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL5,
+ NAU8825_FLL_PDB_DAC_EN | NAU8825_FLL_LOOP_FTR_EN |
+ NAU8825_FLL_FTR_SW_MASK, NAU8825_FLL_FTR_SW_ACCU);
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL6,
+ NAU8825_SDM_EN | NAU8825_CUTOFF500, 0);
+ }
+}
+
+/* freq_out must be 256*Fs in order to achieve the best performance */
+static int nau8825_set_pll(struct snd_soc_component *component, int pll_id, int source,
+ unsigned int freq_in, unsigned int freq_out)
+{
+ struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
+ struct nau8825_fll fll_param;
+ int ret, fs;
+
+ if (nau8825->sw_id == NAU8825_SOFTWARE_ID_NAU8825)
+ fll_param.fll_frac_num = 16;
+ else
+ fll_param.fll_frac_num = 24;
+
+ fs = freq_out / 256;
+ ret = nau8825_calc_fll_param(freq_in, fs, &fll_param);
+ if (ret < 0) {
+ dev_err(component->dev, "Unsupported input clock %d\n", freq_in);
+ return ret;
+ }
+ dev_dbg(component->dev, "mclk_src=%x ratio=%x fll_frac=%x fll_int=%x clk_ref_div=%x\n",
+ fll_param.mclk_src, fll_param.ratio, fll_param.fll_frac,
+ fll_param.fll_int, fll_param.clk_ref_div);
+
+ nau8825_fll_apply(nau8825, &fll_param);
+ mdelay(2);
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER,
+ NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_VCO);
+ return 0;
+}
+
+static int nau8825_mclk_prepare(struct nau8825 *nau8825, unsigned int freq)
+{
+ int ret;
+
+ nau8825->mclk = devm_clk_get(nau8825->dev, "mclk");
+ if (IS_ERR(nau8825->mclk)) {
+ dev_info(nau8825->dev, "No 'mclk' clock found, assume MCLK is managed externally");
+ return 0;
+ }
+
+ if (!nau8825->mclk_freq) {
+ ret = clk_prepare_enable(nau8825->mclk);
+ if (ret) {
+ dev_err(nau8825->dev, "Unable to prepare codec mclk\n");
+ return ret;
+ }
+ }
+
+ if (nau8825->mclk_freq != freq) {
+ freq = clk_round_rate(nau8825->mclk, freq);
+ ret = clk_set_rate(nau8825->mclk, freq);
+ if (ret) {
+ dev_err(nau8825->dev, "Unable to set mclk rate\n");
+ return ret;
+ }
+ nau8825->mclk_freq = freq;
+ }
+
+ return 0;
+}
+
+static void nau8825_configure_mclk_as_sysclk(struct regmap *regmap)
+{
+ regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER,
+ NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_MCLK);
+ regmap_update_bits(regmap, NAU8825_REG_FLL6,
+ NAU8825_DCO_EN, 0);
+ /* Make DSP operate as default setting for power saving. */
+ regmap_update_bits(regmap, NAU8825_REG_FLL1,
+ NAU8825_ICTRL_LATCH_MASK, 0);
+}
+
+static int nau8825_configure_sysclk(struct nau8825 *nau8825, int clk_id,
+ unsigned int freq)
+{
+ struct regmap *regmap = nau8825->regmap;
+ int ret;
+
+ switch (clk_id) {
+ case NAU8825_CLK_DIS:
+ /* Clock provided externally and disable internal VCO clock */
+ nau8825_configure_mclk_as_sysclk(regmap);
+ if (nau8825->mclk_freq) {
+ clk_disable_unprepare(nau8825->mclk);
+ nau8825->mclk_freq = 0;
+ }
+
+ break;
+ case NAU8825_CLK_MCLK:
+ /* Acquire the semaphore to synchronize the playback and
+ * interrupt handler. In order to avoid the playback inter-
+ * fered by cross talk process, the driver make the playback
+ * preparation halted until cross talk process finish.
+ */
+ nau8825_sema_acquire(nau8825, 3 * HZ);
+ nau8825_configure_mclk_as_sysclk(regmap);
+ /* MCLK not changed by clock tree */
+ regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER,
+ NAU8825_CLK_MCLK_SRC_MASK, 0);
+ /* Release the semaphore. */
+ nau8825_sema_release(nau8825);
+
+ ret = nau8825_mclk_prepare(nau8825, freq);
+ if (ret)
+ return ret;
+
+ break;
+ case NAU8825_CLK_INTERNAL:
+ if (nau8825_is_jack_inserted(nau8825->regmap)) {
+ regmap_update_bits(regmap, NAU8825_REG_FLL6,
+ NAU8825_DCO_EN, NAU8825_DCO_EN);
+ regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER,
+ NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_VCO);
+ /* Decrease the VCO frequency and make DSP operate
+ * as default setting for power saving.
+ */
+ regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER,
+ NAU8825_CLK_MCLK_SRC_MASK, 0xf);
+ regmap_update_bits(regmap, NAU8825_REG_FLL1,
+ NAU8825_ICTRL_LATCH_MASK |
+ NAU8825_FLL_RATIO_MASK, 0x10);
+ regmap_update_bits(regmap, NAU8825_REG_FLL6,
+ NAU8825_SDM_EN, NAU8825_SDM_EN);
+ } else {
+ /* The clock turns off intentionally for power saving
+ * when no headset connected.
+ */
+ nau8825_configure_mclk_as_sysclk(regmap);
+ dev_warn(nau8825->dev, "Disable clock for power saving when no headset connected\n");
+ }
+ if (nau8825->mclk_freq) {
+ clk_disable_unprepare(nau8825->mclk);
+ nau8825->mclk_freq = 0;
+ }
+
+ break;
+ case NAU8825_CLK_FLL_MCLK:
+ /* Acquire the semaphore to synchronize the playback and
+ * interrupt handler. In order to avoid the playback inter-
+ * fered by cross talk process, the driver make the playback
+ * preparation halted until cross talk process finish.
+ */
+ nau8825_sema_acquire(nau8825, 3 * HZ);
+ /* Higher FLL reference input frequency can only set lower
+ * gain error, such as 0000 for input reference from MCLK
+ * 12.288Mhz.
+ */
+ regmap_update_bits(regmap, NAU8825_REG_FLL3,
+ NAU8825_FLL_CLK_SRC_MASK | NAU8825_GAIN_ERR_MASK,
+ NAU8825_FLL_CLK_SRC_MCLK | 0);
+ /* Release the semaphore. */
+ nau8825_sema_release(nau8825);
+
+ ret = nau8825_mclk_prepare(nau8825, freq);
+ if (ret)
+ return ret;
+
+ break;
+ case NAU8825_CLK_FLL_BLK:
+ /* Acquire the semaphore to synchronize the playback and
+ * interrupt handler. In order to avoid the playback inter-
+ * fered by cross talk process, the driver make the playback
+ * preparation halted until cross talk process finish.
+ */
+ nau8825_sema_acquire(nau8825, 3 * HZ);
+ /* If FLL reference input is from low frequency source,
+ * higher error gain can apply such as 0xf which has
+ * the most sensitive gain error correction threshold,
+ * Therefore, FLL has the most accurate DCO to
+ * target frequency.
+ */
+ regmap_update_bits(regmap, NAU8825_REG_FLL3,
+ NAU8825_FLL_CLK_SRC_MASK | NAU8825_GAIN_ERR_MASK,
+ NAU8825_FLL_CLK_SRC_BLK |
+ (0xf << NAU8825_GAIN_ERR_SFT));
+ /* Release the semaphore. */
+ nau8825_sema_release(nau8825);
+
+ if (nau8825->mclk_freq) {
+ clk_disable_unprepare(nau8825->mclk);
+ nau8825->mclk_freq = 0;
+ }
+
+ break;
+ case NAU8825_CLK_FLL_FS:
+ /* Acquire the semaphore to synchronize the playback and
+ * interrupt handler. In order to avoid the playback inter-
+ * fered by cross talk process, the driver make the playback
+ * preparation halted until cross talk process finish.
+ */
+ nau8825_sema_acquire(nau8825, 3 * HZ);
+ /* If FLL reference input is from low frequency source,
+ * higher error gain can apply such as 0xf which has
+ * the most sensitive gain error correction threshold,
+ * Therefore, FLL has the most accurate DCO to
+ * target frequency.
+ */
+ regmap_update_bits(regmap, NAU8825_REG_FLL3,
+ NAU8825_FLL_CLK_SRC_MASK | NAU8825_GAIN_ERR_MASK,
+ NAU8825_FLL_CLK_SRC_FS |
+ (0xf << NAU8825_GAIN_ERR_SFT));
+ /* Release the semaphore. */
+ nau8825_sema_release(nau8825);
+
+ if (nau8825->mclk_freq) {
+ clk_disable_unprepare(nau8825->mclk);
+ nau8825->mclk_freq = 0;
+ }
+
+ break;
+ default:
+ dev_err(nau8825->dev, "Invalid clock id (%d)\n", clk_id);
+ return -EINVAL;
+ }
+
+ dev_dbg(nau8825->dev, "Sysclk is %dHz and clock id is %d\n", freq,
+ clk_id);
+ return 0;
+}
+
+static int nau8825_set_sysclk(struct snd_soc_component *component, int clk_id,
+ int source, unsigned int freq, int dir)
+{
+ struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
+
+ return nau8825_configure_sysclk(nau8825, clk_id, freq);
+}
+
+static int nau8825_resume_setup(struct nau8825 *nau8825)
+{
+ struct regmap *regmap = nau8825->regmap;
+
+ /* Close clock when jack type detection at manual mode */
+ nau8825_configure_sysclk(nau8825, NAU8825_CLK_DIS, 0);
+
+ /* Clear all interruption status */
+ nau8825_int_status_clear_all(regmap);
+
+ /* Enable both insertion and ejection interruptions, and then
+ * bypass de-bounce circuit.
+ */
+ regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK,
+ NAU8825_IRQ_OUTPUT_EN | NAU8825_IRQ_HEADSET_COMPLETE_EN |
+ NAU8825_IRQ_EJECT_EN | NAU8825_IRQ_INSERT_EN,
+ NAU8825_IRQ_OUTPUT_EN | NAU8825_IRQ_HEADSET_COMPLETE_EN);
+ regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL,
+ NAU8825_JACK_DET_DB_BYPASS, NAU8825_JACK_DET_DB_BYPASS);
+ regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_DIS_CTRL,
+ NAU8825_IRQ_INSERT_DIS | NAU8825_IRQ_EJECT_DIS, 0);
+
+ return 0;
+}
+
+static int nau8825_set_bias_level(struct snd_soc_component *component,
+ enum snd_soc_bias_level level)
+{
+ struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
+ int ret;
+
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ break;
+
+ case SND_SOC_BIAS_PREPARE:
+ break;
+
+ case SND_SOC_BIAS_STANDBY:
+ if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) {
+ if (nau8825->mclk_freq) {
+ ret = clk_prepare_enable(nau8825->mclk);
+ if (ret) {
+ dev_err(nau8825->dev, "Unable to prepare component mclk\n");
+ return ret;
+ }
+ }
+ /* Setup codec configuration after resume */
+ nau8825_resume_setup(nau8825);
+ }
+ break;
+
+ case SND_SOC_BIAS_OFF:
+ /* Reset the configuration of jack type for detection */
+ /* Detach 2kOhm Resistors from MICBIAS to MICGND1/2 */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_MIC_BIAS,
+ NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2, 0);
+ /* ground HPL/HPR, MICGRND1/2 */
+ regmap_update_bits(nau8825->regmap,
+ NAU8825_REG_HSD_CTRL, 0xf, 0xf);
+ /* Cancel and reset cross talk detection funciton */
+ nau8825_xtalk_cancel(nau8825);
+ /* Turn off all interruptions before system shutdown. Keep the
+ * interruption quiet before resume setup completes.
+ */
+ regmap_write(nau8825->regmap,
+ NAU8825_REG_INTERRUPT_DIS_CTRL, 0xffff);
+ /* Disable ADC needed for interruptions at audo mode */
+ regmap_update_bits(nau8825->regmap, NAU8825_REG_ENA_CTRL,
+ NAU8825_ENABLE_ADC, 0);
+ if (nau8825->mclk_freq)
+ clk_disable_unprepare(nau8825->mclk);
+ break;
+ }
+ return 0;
+}
+
+static int __maybe_unused nau8825_suspend(struct snd_soc_component *component)
+{
+ struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
+
+ disable_irq(nau8825->irq);
+ snd_soc_component_force_bias_level(component, SND_SOC_BIAS_OFF);
+ /* Power down codec power; don't suppoet button wakeup */
+ snd_soc_dapm_disable_pin(nau8825->dapm, "SAR");
+ snd_soc_dapm_disable_pin(nau8825->dapm, "MICBIAS");
+ snd_soc_dapm_sync(nau8825->dapm);
+ regcache_cache_only(nau8825->regmap, true);
+ regcache_mark_dirty(nau8825->regmap);
+
+ return 0;
+}
+
+static int __maybe_unused nau8825_resume(struct snd_soc_component *component)
+{
+ struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component);
+ int ret;
+
+ regcache_cache_only(nau8825->regmap, false);
+ regcache_sync(nau8825->regmap);
+ nau8825->xtalk_protect = true;
+ ret = nau8825_sema_acquire(nau8825, 0);
+ if (ret)
+ nau8825->xtalk_protect = false;
+ enable_irq(nau8825->irq);
+
+ return 0;
+}
+
+static int nau8825_set_jack(struct snd_soc_component *component,
+ struct snd_soc_jack *jack, void *data)
+{
+ return nau8825_enable_jack_detect(component, jack);
+}
+
+static const struct snd_soc_component_driver nau8825_component_driver = {
+ .probe = nau8825_component_probe,
+ .remove = nau8825_component_remove,
+ .set_sysclk = nau8825_set_sysclk,
+ .set_pll = nau8825_set_pll,
+ .set_bias_level = nau8825_set_bias_level,
+ .suspend = nau8825_suspend,
+ .resume = nau8825_resume,
+ .controls = nau8825_controls,
+ .num_controls = ARRAY_SIZE(nau8825_controls),
+ .dapm_widgets = nau8825_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(nau8825_dapm_widgets),
+ .dapm_routes = nau8825_dapm_routes,
+ .num_dapm_routes = ARRAY_SIZE(nau8825_dapm_routes),
+ .set_jack = nau8825_set_jack,
+ .suspend_bias_off = 1,
+ .idle_bias_on = 1,
+ .use_pmdown_time = 1,
+ .endianness = 1,
+};
+
+static void nau8825_reset_chip(struct regmap *regmap)
+{
+ regmap_write(regmap, NAU8825_REG_RESET, 0x00);
+ regmap_write(regmap, NAU8825_REG_RESET, 0x00);
+}
+
+static void nau8825_print_device_properties(struct nau8825 *nau8825)
+{
+ int i;
+ struct device *dev = nau8825->dev;
+
+ dev_dbg(dev, "jkdet-enable: %d\n", nau8825->jkdet_enable);
+ dev_dbg(dev, "jkdet-pull-enable: %d\n", nau8825->jkdet_pull_enable);
+ dev_dbg(dev, "jkdet-pull-up: %d\n", nau8825->jkdet_pull_up);
+ dev_dbg(dev, "jkdet-polarity: %d\n", nau8825->jkdet_polarity);
+ dev_dbg(dev, "micbias-voltage: %d\n", nau8825->micbias_voltage);
+ dev_dbg(dev, "vref-impedance: %d\n", nau8825->vref_impedance);
+
+ dev_dbg(dev, "sar-threshold-num: %d\n", nau8825->sar_threshold_num);
+ for (i = 0; i < nau8825->sar_threshold_num; i++)
+ dev_dbg(dev, "sar-threshold[%d]=%d\n", i,
+ nau8825->sar_threshold[i]);
+
+ dev_dbg(dev, "sar-hysteresis: %d\n", nau8825->sar_hysteresis);
+ dev_dbg(dev, "sar-voltage: %d\n", nau8825->sar_voltage);
+ dev_dbg(dev, "sar-compare-time: %d\n", nau8825->sar_compare_time);
+ dev_dbg(dev, "sar-sampling-time: %d\n", nau8825->sar_sampling_time);
+ dev_dbg(dev, "short-key-debounce: %d\n", nau8825->key_debounce);
+ dev_dbg(dev, "jack-insert-debounce: %d\n",
+ nau8825->jack_insert_debounce);
+ dev_dbg(dev, "jack-eject-debounce: %d\n",
+ nau8825->jack_eject_debounce);
+ dev_dbg(dev, "crosstalk-enable: %d\n",
+ nau8825->xtalk_enable);
+ dev_dbg(dev, "adcout-drive-strong: %d\n", nau8825->adcout_ds);
+ dev_dbg(dev, "adc-delay-ms: %d\n", nau8825->adc_delay);
+}
+
+static int nau8825_read_device_properties(struct device *dev,
+ struct nau8825 *nau8825) {
+ int ret;
+
+ nau8825->jkdet_enable = device_property_read_bool(dev,
+ "nuvoton,jkdet-enable");
+ nau8825->jkdet_pull_enable = device_property_read_bool(dev,
+ "nuvoton,jkdet-pull-enable");
+ nau8825->jkdet_pull_up = device_property_read_bool(dev,
+ "nuvoton,jkdet-pull-up");
+ ret = device_property_read_u32(dev, "nuvoton,jkdet-polarity",
+ &nau8825->jkdet_polarity);
+ if (ret)
+ nau8825->jkdet_polarity = 1;
+ ret = device_property_read_u32(dev, "nuvoton,micbias-voltage",
+ &nau8825->micbias_voltage);
+ if (ret)
+ nau8825->micbias_voltage = 6;
+ ret = device_property_read_u32(dev, "nuvoton,vref-impedance",
+ &nau8825->vref_impedance);
+ if (ret)
+ nau8825->vref_impedance = 2;
+ ret = device_property_read_u32(dev, "nuvoton,sar-threshold-num",
+ &nau8825->sar_threshold_num);
+ if (ret)
+ nau8825->sar_threshold_num = 4;
+ ret = device_property_read_u32_array(dev, "nuvoton,sar-threshold",
+ nau8825->sar_threshold, nau8825->sar_threshold_num);
+ if (ret) {
+ nau8825->sar_threshold[0] = 0x08;
+ nau8825->sar_threshold[1] = 0x12;
+ nau8825->sar_threshold[2] = 0x26;
+ nau8825->sar_threshold[3] = 0x73;
+ }
+ ret = device_property_read_u32(dev, "nuvoton,sar-hysteresis",
+ &nau8825->sar_hysteresis);
+ if (ret)
+ nau8825->sar_hysteresis = 0;
+ ret = device_property_read_u32(dev, "nuvoton,sar-voltage",
+ &nau8825->sar_voltage);
+ if (ret)
+ nau8825->sar_voltage = 6;
+ ret = device_property_read_u32(dev, "nuvoton,sar-compare-time",
+ &nau8825->sar_compare_time);
+ if (ret)
+ nau8825->sar_compare_time = 1;
+ ret = device_property_read_u32(dev, "nuvoton,sar-sampling-time",
+ &nau8825->sar_sampling_time);
+ if (ret)
+ nau8825->sar_sampling_time = 1;
+ ret = device_property_read_u32(dev, "nuvoton,short-key-debounce",
+ &nau8825->key_debounce);
+ if (ret)
+ nau8825->key_debounce = 3;
+ ret = device_property_read_u32(dev, "nuvoton,jack-insert-debounce",
+ &nau8825->jack_insert_debounce);
+ if (ret)
+ nau8825->jack_insert_debounce = 7;
+ ret = device_property_read_u32(dev, "nuvoton,jack-eject-debounce",
+ &nau8825->jack_eject_debounce);
+ if (ret)
+ nau8825->jack_eject_debounce = 0;
+ nau8825->xtalk_enable = device_property_read_bool(dev,
+ "nuvoton,crosstalk-enable");
+ nau8825->adcout_ds = device_property_read_bool(dev, "nuvoton,adcout-drive-strong");
+ ret = device_property_read_u32(dev, "nuvoton,adc-delay-ms", &nau8825->adc_delay);
+ if (ret)
+ nau8825->adc_delay = 125;
+ if (nau8825->adc_delay < 125 || nau8825->adc_delay > 500)
+ dev_warn(dev, "Please set the suitable delay time!\n");
+
+ nau8825->mclk = devm_clk_get(dev, "mclk");
+ if (PTR_ERR(nau8825->mclk) == -EPROBE_DEFER) {
+ return -EPROBE_DEFER;
+ } else if (PTR_ERR(nau8825->mclk) == -ENOENT) {
+ /* The MCLK is managed externally or not used at all */
+ nau8825->mclk = NULL;
+ dev_info(dev, "No 'mclk' clock found, assume MCLK is managed externally");
+ } else if (IS_ERR(nau8825->mclk)) {
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int nau8825_setup_irq(struct nau8825 *nau8825)
+{
+ int ret;
+
+ ret = devm_request_threaded_irq(nau8825->dev, nau8825->irq, NULL,
+ nau8825_interrupt, IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ "nau8825", nau8825);
+
+ if (ret) {
+ dev_err(nau8825->dev, "Cannot request irq %d (%d)\n",
+ nau8825->irq, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int nau8825_i2c_probe(struct i2c_client *i2c)
+{
+ struct device *dev = &i2c->dev;
+ struct nau8825 *nau8825 = dev_get_platdata(&i2c->dev);
+ int ret, value;
+
+ if (!nau8825) {
+ nau8825 = devm_kzalloc(dev, sizeof(*nau8825), GFP_KERNEL);
+ if (!nau8825)
+ return -ENOMEM;
+ ret = nau8825_read_device_properties(dev, nau8825);
+ if (ret)
+ return ret;
+ }
+
+ i2c_set_clientdata(i2c, nau8825);
+
+ nau8825->regmap = devm_regmap_init_i2c(i2c, &nau8825_regmap_config);
+ if (IS_ERR(nau8825->regmap))
+ return PTR_ERR(nau8825->regmap);
+ nau8825->dev = dev;
+ nau8825->irq = i2c->irq;
+ /* Initiate parameters, semaphore and work queue which are needed in
+ * cross talk suppression measurment function.
+ */
+ nau8825->xtalk_state = NAU8825_XTALK_DONE;
+ nau8825->xtalk_protect = false;
+ nau8825->xtalk_baktab_initialized = false;
+ sema_init(&nau8825->xtalk_sem, 1);
+ INIT_WORK(&nau8825->xtalk_work, nau8825_xtalk_work);
+
+ nau8825_print_device_properties(nau8825);
+
+ nau8825_reset_chip(nau8825->regmap);
+ ret = regmap_read(nau8825->regmap, NAU8825_REG_I2C_DEVICE_ID, &value);
+ if (ret < 0) {
+ dev_err(dev, "Failed to read device id from the NAU8825: %d\n",
+ ret);
+ return ret;
+ }
+ nau8825->sw_id = value & NAU8825_SOFTWARE_ID_MASK;
+ switch (nau8825->sw_id) {
+ case NAU8825_SOFTWARE_ID_NAU8825:
+ break;
+ case NAU8825_SOFTWARE_ID_NAU8825C:
+ ret = regmap_register_patch(nau8825->regmap, nau8825_regmap_patch,
+ ARRAY_SIZE(nau8825_regmap_patch));
+ if (ret) {
+ dev_err(dev, "Failed to register Rev C patch: %d\n", ret);
+ return ret;
+ }
+ break;
+ default:
+ dev_err(dev, "Not a NAU8825 chip\n");
+ return -ENODEV;
+ }
+
+ nau8825_init_regs(nau8825);
+
+ if (i2c->irq)
+ nau8825_setup_irq(nau8825);
+
+ return devm_snd_soc_register_component(&i2c->dev,
+ &nau8825_component_driver,
+ &nau8825_dai, 1);
+}
+
+static void nau8825_i2c_remove(struct i2c_client *client)
+{}
+
+static const struct i2c_device_id nau8825_i2c_ids[] = {
+ { "nau8825", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, nau8825_i2c_ids);
+
+#ifdef CONFIG_OF
+static const struct of_device_id nau8825_of_ids[] = {
+ { .compatible = "nuvoton,nau8825", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, nau8825_of_ids);
+#endif
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id nau8825_acpi_match[] = {
+ { "10508825", 0 },
+ {},
+};
+MODULE_DEVICE_TABLE(acpi, nau8825_acpi_match);
+#endif
+
+static struct i2c_driver nau8825_driver = {
+ .driver = {
+ .name = "nau8825",
+ .of_match_table = of_match_ptr(nau8825_of_ids),
+ .acpi_match_table = ACPI_PTR(nau8825_acpi_match),
+ },
+ .probe = nau8825_i2c_probe,
+ .remove = nau8825_i2c_remove,
+ .id_table = nau8825_i2c_ids,
+};
+module_i2c_driver(nau8825_driver);
+
+MODULE_DESCRIPTION("ASoC nau8825 driver");
+MODULE_AUTHOR("Anatol Pomozov <anatol@chromium.org>");
+MODULE_LICENSE("GPL");