diff options
Diffstat (limited to 'sound/soc/codecs/sgtl5000.c')
| -rw-r--r-- | sound/soc/codecs/sgtl5000.c | 1839 |
1 files changed, 1839 insertions, 0 deletions
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c new file mode 100644 index 000000000..b22ba95bd --- /dev/null +++ b/sound/soc/codecs/sgtl5000.c @@ -0,0 +1,1839 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// sgtl5000.c -- SGTL5000 ALSA SoC Audio driver +// +// Copyright 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved. + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/pm.h> +#include <linux/i2c.h> +#include <linux/clk.h> +#include <linux/log2.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/consumer.h> +#include <linux/of_device.h> +#include <sound/core.h> +#include <sound/tlv.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/initval.h> + +#include "sgtl5000.h" + +#define SGTL5000_DAP_REG_OFFSET 0x0100 +#define SGTL5000_MAX_REG_OFFSET 0x013A + +/* Delay for the VAG ramp up */ +#define SGTL5000_VAG_POWERUP_DELAY 500 /* ms */ +/* Delay for the VAG ramp down */ +#define SGTL5000_VAG_POWERDOWN_DELAY 500 /* ms */ + +#define SGTL5000_OUTPUTS_MUTE (SGTL5000_HP_MUTE | SGTL5000_LINE_OUT_MUTE) + +/* default value of sgtl5000 registers */ +static const struct reg_default sgtl5000_reg_defaults[] = { + { SGTL5000_CHIP_DIG_POWER, 0x0000 }, + { SGTL5000_CHIP_I2S_CTRL, 0x0010 }, + { SGTL5000_CHIP_SSS_CTRL, 0x0010 }, + { SGTL5000_CHIP_ADCDAC_CTRL, 0x020c }, + { SGTL5000_CHIP_DAC_VOL, 0x3c3c }, + { SGTL5000_CHIP_PAD_STRENGTH, 0x015f }, + { SGTL5000_CHIP_ANA_ADC_CTRL, 0x0000 }, + { SGTL5000_CHIP_ANA_HP_CTRL, 0x1818 }, + { SGTL5000_CHIP_ANA_CTRL, 0x0111 }, + { SGTL5000_CHIP_REF_CTRL, 0x0000 }, + { SGTL5000_CHIP_MIC_CTRL, 0x0000 }, + { SGTL5000_CHIP_LINE_OUT_CTRL, 0x0000 }, + { SGTL5000_CHIP_LINE_OUT_VOL, 0x0404 }, + { SGTL5000_CHIP_PLL_CTRL, 0x5000 }, + { SGTL5000_CHIP_CLK_TOP_CTRL, 0x0000 }, + { SGTL5000_CHIP_ANA_STATUS, 0x0000 }, + { SGTL5000_CHIP_SHORT_CTRL, 0x0000 }, + { SGTL5000_CHIP_ANA_TEST2, 0x0000 }, + { SGTL5000_DAP_CTRL, 0x0000 }, + { SGTL5000_DAP_PEQ, 0x0000 }, + { SGTL5000_DAP_BASS_ENHANCE, 0x0040 }, + { SGTL5000_DAP_BASS_ENHANCE_CTRL, 0x051f }, + { SGTL5000_DAP_AUDIO_EQ, 0x0000 }, + { SGTL5000_DAP_SURROUND, 0x0040 }, + { SGTL5000_DAP_EQ_BASS_BAND0, 0x002f }, + { SGTL5000_DAP_EQ_BASS_BAND1, 0x002f }, + { SGTL5000_DAP_EQ_BASS_BAND2, 0x002f }, + { SGTL5000_DAP_EQ_BASS_BAND3, 0x002f }, + { SGTL5000_DAP_EQ_BASS_BAND4, 0x002f }, + { SGTL5000_DAP_MAIN_CHAN, 0x8000 }, + { SGTL5000_DAP_MIX_CHAN, 0x0000 }, + { SGTL5000_DAP_AVC_CTRL, 0x5100 }, + { SGTL5000_DAP_AVC_THRESHOLD, 0x1473 }, + { SGTL5000_DAP_AVC_ATTACK, 0x0028 }, + { SGTL5000_DAP_AVC_DECAY, 0x0050 }, +}; + +/* AVC: Threshold dB -> register: pre-calculated values */ +static const u16 avc_thr_db2reg[97] = { + 0x5168, 0x488E, 0x40AA, 0x39A1, 0x335D, 0x2DC7, 0x28CC, 0x245D, 0x2068, + 0x1CE2, 0x19BE, 0x16F1, 0x1472, 0x1239, 0x103E, 0x0E7A, 0x0CE6, 0x0B7F, + 0x0A3F, 0x0922, 0x0824, 0x0741, 0x0677, 0x05C3, 0x0522, 0x0493, 0x0414, + 0x03A2, 0x033D, 0x02E3, 0x0293, 0x024B, 0x020B, 0x01D2, 0x019F, 0x0172, + 0x014A, 0x0126, 0x0106, 0x00E9, 0x00D0, 0x00B9, 0x00A5, 0x0093, 0x0083, + 0x0075, 0x0068, 0x005D, 0x0052, 0x0049, 0x0041, 0x003A, 0x0034, 0x002E, + 0x0029, 0x0025, 0x0021, 0x001D, 0x001A, 0x0017, 0x0014, 0x0012, 0x0010, + 0x000E, 0x000D, 0x000B, 0x000A, 0x0009, 0x0008, 0x0007, 0x0006, 0x0005, + 0x0005, 0x0004, 0x0004, 0x0003, 0x0003, 0x0002, 0x0002, 0x0002, 0x0002, + 0x0001, 0x0001, 0x0001, 0x0001, 0x0001, 0x0001, 0x0000, 0x0000, 0x0000, + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000}; + +/* regulator supplies for sgtl5000, VDDD is an optional external supply */ +enum sgtl5000_regulator_supplies { + VDDA, + VDDIO, + VDDD, + SGTL5000_SUPPLY_NUM +}; + +/* vddd is optional supply */ +static const char *supply_names[SGTL5000_SUPPLY_NUM] = { + "VDDA", + "VDDIO", + "VDDD" +}; + +#define LDO_VOLTAGE 1200000 +#define LINREG_VDDD ((1600 - LDO_VOLTAGE / 1000) / 50) + +enum sgtl5000_micbias_resistor { + SGTL5000_MICBIAS_OFF = 0, + SGTL5000_MICBIAS_2K = 2, + SGTL5000_MICBIAS_4K = 4, + SGTL5000_MICBIAS_8K = 8, +}; + +enum { + I2S_LRCLK_STRENGTH_DISABLE, + I2S_LRCLK_STRENGTH_LOW, + I2S_LRCLK_STRENGTH_MEDIUM, + I2S_LRCLK_STRENGTH_HIGH, +}; + +enum { + I2S_SCLK_STRENGTH_DISABLE, + I2S_SCLK_STRENGTH_LOW, + I2S_SCLK_STRENGTH_MEDIUM, + I2S_SCLK_STRENGTH_HIGH, +}; + +enum { + HP_POWER_EVENT, + DAC_POWER_EVENT, + ADC_POWER_EVENT, + LAST_POWER_EVENT = ADC_POWER_EVENT +}; + +/* sgtl5000 private structure in codec */ +struct sgtl5000_priv { + int sysclk; /* sysclk rate */ + int master; /* i2s master or not */ + int fmt; /* i2s data format */ + struct regulator_bulk_data supplies[SGTL5000_SUPPLY_NUM]; + int num_supplies; + struct regmap *regmap; + struct clk *mclk; + int revision; + u8 micbias_resistor; + u8 micbias_voltage; + u8 lrclk_strength; + u8 sclk_strength; + u16 mute_state[LAST_POWER_EVENT + 1]; +}; + +static inline int hp_sel_input(struct snd_soc_component *component) +{ + return (snd_soc_component_read(component, SGTL5000_CHIP_ANA_CTRL) & + SGTL5000_HP_SEL_MASK) >> SGTL5000_HP_SEL_SHIFT; +} + +static inline u16 mute_output(struct snd_soc_component *component, + u16 mute_mask) +{ + u16 mute_reg = snd_soc_component_read(component, + SGTL5000_CHIP_ANA_CTRL); + + snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_CTRL, + mute_mask, mute_mask); + return mute_reg; +} + +static inline void restore_output(struct snd_soc_component *component, + u16 mute_mask, u16 mute_reg) +{ + snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_CTRL, + mute_mask, mute_reg); +} + +static void vag_power_on(struct snd_soc_component *component, u32 source) +{ + if (snd_soc_component_read(component, SGTL5000_CHIP_ANA_POWER) & + SGTL5000_VAG_POWERUP) + return; + + snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER, + SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP); + + /* When VAG powering on to get local loop from Line-In, the sleep + * is required to avoid loud pop. + */ + if (hp_sel_input(component) == SGTL5000_HP_SEL_LINE_IN && + source == HP_POWER_EVENT) + msleep(SGTL5000_VAG_POWERUP_DELAY); +} + +static int vag_power_consumers(struct snd_soc_component *component, + u16 ana_pwr_reg, u32 source) +{ + int consumers = 0; + + /* count dac/adc consumers unconditional */ + if (ana_pwr_reg & SGTL5000_DAC_POWERUP) + consumers++; + if (ana_pwr_reg & SGTL5000_ADC_POWERUP) + consumers++; + + /* + * If the event comes from HP and Line-In is selected, + * current action is 'DAC to be powered down'. + * As HP_POWERUP is not set when HP muxed to line-in, + * we need to keep VAG power ON. + */ + if (source == HP_POWER_EVENT) { + if (hp_sel_input(component) == SGTL5000_HP_SEL_LINE_IN) + consumers++; + } else { + if (ana_pwr_reg & SGTL5000_HP_POWERUP) + consumers++; + } + + return consumers; +} + +static void vag_power_off(struct snd_soc_component *component, u32 source) +{ + u16 ana_pwr = snd_soc_component_read(component, + SGTL5000_CHIP_ANA_POWER); + + if (!(ana_pwr & SGTL5000_VAG_POWERUP)) + return; + + /* + * This function calls when any of VAG power consumers is disappearing. + * Thus, if there is more than one consumer at the moment, as minimum + * one consumer will definitely stay after the end of the current + * event. + * Don't clear VAG_POWERUP if 2 or more consumers of VAG present: + * - LINE_IN (for HP events) / HP (for DAC/ADC events) + * - DAC + * - ADC + * (the current consumer is disappearing right now) + */ + if (vag_power_consumers(component, ana_pwr, source) >= 2) + return; + + snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER, + SGTL5000_VAG_POWERUP, 0); + /* In power down case, we need wait 400-1000 ms + * when VAG fully ramped down. + * As longer we wait, as smaller pop we've got. + */ + msleep(SGTL5000_VAG_POWERDOWN_DELAY); +} + +/* + * mic_bias power on/off share the same register bits with + * output impedance of mic bias, when power on mic bias, we + * need reclaim it to impedance value. + * 0x0 = Powered off + * 0x1 = 2Kohm + * 0x2 = 4Kohm + * 0x3 = 8Kohm + */ +static int mic_bias_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + struct sgtl5000_priv *sgtl5000 = snd_soc_component_get_drvdata(component); + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + /* change mic bias resistor */ + snd_soc_component_update_bits(component, SGTL5000_CHIP_MIC_CTRL, + SGTL5000_BIAS_R_MASK, + sgtl5000->micbias_resistor << SGTL5000_BIAS_R_SHIFT); + break; + + case SND_SOC_DAPM_PRE_PMD: + snd_soc_component_update_bits(component, SGTL5000_CHIP_MIC_CTRL, + SGTL5000_BIAS_R_MASK, 0); + break; + } + return 0; +} + +static int vag_and_mute_control(struct snd_soc_component *component, + int event, int event_source) +{ + static const u16 mute_mask[] = { + /* + * Mask for HP_POWER_EVENT. + * Muxing Headphones have to be wrapped with mute/unmute + * headphones only. + */ + SGTL5000_HP_MUTE, + /* + * Masks for DAC_POWER_EVENT/ADC_POWER_EVENT. + * Muxing DAC or ADC block have to wrapped with mute/unmute + * both headphones and line-out. + */ + SGTL5000_OUTPUTS_MUTE, + SGTL5000_OUTPUTS_MUTE + }; + + struct sgtl5000_priv *sgtl5000 = + snd_soc_component_get_drvdata(component); + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + sgtl5000->mute_state[event_source] = + mute_output(component, mute_mask[event_source]); + break; + case SND_SOC_DAPM_POST_PMU: + vag_power_on(component, event_source); + restore_output(component, mute_mask[event_source], + sgtl5000->mute_state[event_source]); + break; + case SND_SOC_DAPM_PRE_PMD: + sgtl5000->mute_state[event_source] = + mute_output(component, mute_mask[event_source]); + vag_power_off(component, event_source); + break; + case SND_SOC_DAPM_POST_PMD: + restore_output(component, mute_mask[event_source], + sgtl5000->mute_state[event_source]); + break; + default: + break; + } + + return 0; +} + +/* + * Mute Headphone when power it up/down. + * Control VAG power on HP power path. + */ +static int headphone_pga_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + + return vag_and_mute_control(component, event, HP_POWER_EVENT); +} + +/* As manual describes, ADC/DAC powering up/down requires + * to mute outputs to avoid pops. + * Control VAG power on ADC/DAC power path. + */ +static int adc_updown_depop(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + + return vag_and_mute_control(component, event, ADC_POWER_EVENT); +} + +static int dac_updown_depop(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + + return vag_and_mute_control(component, event, DAC_POWER_EVENT); +} + +/* input sources for ADC */ +static const char *adc_mux_text[] = { + "MIC_IN", "LINE_IN" +}; + +static SOC_ENUM_SINGLE_DECL(adc_enum, + SGTL5000_CHIP_ANA_CTRL, 2, + adc_mux_text); + +static const struct snd_kcontrol_new adc_mux = +SOC_DAPM_ENUM("Capture Mux", adc_enum); + +/* input sources for headphone */ +static const char *hp_mux_text[] = { + "DAC", "LINE_IN" +}; + +static SOC_ENUM_SINGLE_DECL(hp_enum, + SGTL5000_CHIP_ANA_CTRL, 6, + hp_mux_text); + +static const struct snd_kcontrol_new hp_mux = +SOC_DAPM_ENUM("Headphone Mux", hp_enum); + +/* input sources for DAC */ +static const char *dac_mux_text[] = { + "ADC", "I2S", "Rsvrd", "DAP" +}; + +static SOC_ENUM_SINGLE_DECL(dac_enum, + SGTL5000_CHIP_SSS_CTRL, SGTL5000_DAC_SEL_SHIFT, + dac_mux_text); + +static const struct snd_kcontrol_new dac_mux = +SOC_DAPM_ENUM("Digital Input Mux", dac_enum); + +/* input sources for DAP */ +static const char *dap_mux_text[] = { + "ADC", "I2S" +}; + +static SOC_ENUM_SINGLE_DECL(dap_enum, + SGTL5000_CHIP_SSS_CTRL, SGTL5000_DAP_SEL_SHIFT, + dap_mux_text); + +static const struct snd_kcontrol_new dap_mux = +SOC_DAPM_ENUM("DAP Mux", dap_enum); + +/* input sources for DAP mix */ +static const char *dapmix_mux_text[] = { + "ADC", "I2S" +}; + +static SOC_ENUM_SINGLE_DECL(dapmix_enum, + SGTL5000_CHIP_SSS_CTRL, SGTL5000_DAP_MIX_SEL_SHIFT, + dapmix_mux_text); + +static const struct snd_kcontrol_new dapmix_mux = +SOC_DAPM_ENUM("DAP MIX Mux", dapmix_enum); + + +static const struct snd_soc_dapm_widget sgtl5000_dapm_widgets[] = { + SND_SOC_DAPM_INPUT("LINE_IN"), + SND_SOC_DAPM_INPUT("MIC_IN"), + + SND_SOC_DAPM_OUTPUT("HP_OUT"), + SND_SOC_DAPM_OUTPUT("LINE_OUT"), + + SND_SOC_DAPM_SUPPLY("Mic Bias", SGTL5000_CHIP_MIC_CTRL, 8, 0, + mic_bias_event, + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), + + SND_SOC_DAPM_PGA_E("HP", SGTL5000_CHIP_ANA_POWER, 4, 0, NULL, 0, + headphone_pga_event, + SND_SOC_DAPM_PRE_POST_PMU | + SND_SOC_DAPM_PRE_POST_PMD), + SND_SOC_DAPM_PGA("LO", SGTL5000_CHIP_ANA_POWER, 0, 0, NULL, 0), + + SND_SOC_DAPM_MUX("Capture Mux", SND_SOC_NOPM, 0, 0, &adc_mux), + SND_SOC_DAPM_MUX("Headphone Mux", SND_SOC_NOPM, 0, 0, &hp_mux), + SND_SOC_DAPM_MUX("Digital Input Mux", SND_SOC_NOPM, 0, 0, &dac_mux), + SND_SOC_DAPM_MUX("DAP Mux", SGTL5000_DAP_CTRL, 0, 0, &dap_mux), + SND_SOC_DAPM_MUX("DAP MIX Mux", SGTL5000_DAP_CTRL, 4, 0, &dapmix_mux), + SND_SOC_DAPM_MIXER("DAP", SGTL5000_CHIP_DIG_POWER, 4, 0, NULL, 0), + + + /* aif for i2s input */ + SND_SOC_DAPM_AIF_IN("AIFIN", "Playback", + 0, SGTL5000_CHIP_DIG_POWER, + 0, 0), + + /* aif for i2s output */ + SND_SOC_DAPM_AIF_OUT("AIFOUT", "Capture", + 0, SGTL5000_CHIP_DIG_POWER, + 1, 0), + + SND_SOC_DAPM_ADC_E("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0, + adc_updown_depop, SND_SOC_DAPM_PRE_POST_PMU | + SND_SOC_DAPM_PRE_POST_PMD), + SND_SOC_DAPM_DAC_E("DAC", "Playback", SGTL5000_CHIP_ANA_POWER, 3, 0, + dac_updown_depop, SND_SOC_DAPM_PRE_POST_PMU | + SND_SOC_DAPM_PRE_POST_PMD), +}; + +/* routes for sgtl5000 */ +static const struct snd_soc_dapm_route sgtl5000_dapm_routes[] = { + {"Capture Mux", "LINE_IN", "LINE_IN"}, /* line_in --> adc_mux */ + {"Capture Mux", "MIC_IN", "MIC_IN"}, /* mic_in --> adc_mux */ + + {"ADC", NULL, "Capture Mux"}, /* adc_mux --> adc */ + {"AIFOUT", NULL, "ADC"}, /* adc --> i2s_out */ + + {"DAP Mux", "ADC", "ADC"}, /* adc --> DAP mux */ + {"DAP Mux", NULL, "AIFIN"}, /* i2s --> DAP mux */ + {"DAP", NULL, "DAP Mux"}, /* DAP mux --> dap */ + + {"DAP MIX Mux", "ADC", "ADC"}, /* adc --> DAP MIX mux */ + {"DAP MIX Mux", NULL, "AIFIN"}, /* i2s --> DAP MIX mux */ + {"DAP", NULL, "DAP MIX Mux"}, /* DAP MIX mux --> dap */ + + {"Digital Input Mux", "ADC", "ADC"}, /* adc --> audio mux */ + {"Digital Input Mux", NULL, "AIFIN"}, /* i2s --> audio mux */ + {"Digital Input Mux", NULL, "DAP"}, /* dap --> audio mux */ + {"DAC", NULL, "Digital Input Mux"}, /* audio mux --> dac */ + + {"Headphone Mux", "DAC", "DAC"}, /* dac --> hp_mux */ + {"LO", NULL, "DAC"}, /* dac --> line_out */ + + {"Headphone Mux", "LINE_IN", "LINE_IN"},/* line_in --> hp_mux */ + {"HP", NULL, "Headphone Mux"}, /* hp_mux --> hp */ + + {"LINE_OUT", NULL, "LO"}, + {"HP_OUT", NULL, "HP"}, +}; + +/* custom function to fetch info of PCM playback volume */ +static int dac_info_volsw(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 2; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 0xfc - 0x3c; + return 0; +} + +/* + * custom function to get of PCM playback volume + * + * dac volume register + * 15-------------8-7--------------0 + * | R channel vol | L channel vol | + * ------------------------------- + * + * PCM volume with 0.5017 dB steps from 0 to -90 dB + * + * register values map to dB + * 0x3B and less = Reserved + * 0x3C = 0 dB + * 0x3D = -0.5 dB + * 0xF0 = -90 dB + * 0xFC and greater = Muted + * + * register value map to userspace value + * + * register value 0x3c(0dB) 0xf0(-90dB)0xfc + * ------------------------------ + * userspace value 0xc0 0 + */ +static int dac_get_volsw(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + int reg; + int l; + int r; + + reg = snd_soc_component_read(component, SGTL5000_CHIP_DAC_VOL); + + /* get left channel volume */ + l = (reg & SGTL5000_DAC_VOL_LEFT_MASK) >> SGTL5000_DAC_VOL_LEFT_SHIFT; + + /* get right channel volume */ + r = (reg & SGTL5000_DAC_VOL_RIGHT_MASK) >> SGTL5000_DAC_VOL_RIGHT_SHIFT; + + /* make sure value fall in (0x3c,0xfc) */ + l = clamp(l, 0x3c, 0xfc); + r = clamp(r, 0x3c, 0xfc); + + /* invert it and map to userspace value */ + l = 0xfc - l; + r = 0xfc - r; + + ucontrol->value.integer.value[0] = l; + ucontrol->value.integer.value[1] = r; + + return 0; +} + +/* + * custom function to put of PCM playback volume + * + * dac volume register + * 15-------------8-7--------------0 + * | R channel vol | L channel vol | + * ------------------------------- + * + * PCM volume with 0.5017 dB steps from 0 to -90 dB + * + * register values map to dB + * 0x3B and less = Reserved + * 0x3C = 0 dB + * 0x3D = -0.5 dB + * 0xF0 = -90 dB + * 0xFC and greater = Muted + * + * userspace value map to register value + * + * userspace value 0xc0 0 + * ------------------------------ + * register value 0x3c(0dB) 0xf0(-90dB)0xfc + */ +static int dac_put_volsw(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + int reg; + int l; + int r; + + l = ucontrol->value.integer.value[0]; + r = ucontrol->value.integer.value[1]; + + /* make sure userspace volume fall in (0, 0xfc-0x3c) */ + l = clamp(l, 0, 0xfc - 0x3c); + r = clamp(r, 0, 0xfc - 0x3c); + + /* invert it, get the value can be set to register */ + l = 0xfc - l; + r = 0xfc - r; + + /* shift to get the register value */ + reg = l << SGTL5000_DAC_VOL_LEFT_SHIFT | + r << SGTL5000_DAC_VOL_RIGHT_SHIFT; + + snd_soc_component_write(component, SGTL5000_CHIP_DAC_VOL, reg); + + return 0; +} + +/* + * custom function to get AVC threshold + * + * The threshold dB is calculated by rearranging the calculation from the + * avc_put_threshold function: register_value = 10^(dB/20) * 0.636 * 2^15 ==> + * dB = ( fls(register_value) - 14.347 ) * 6.02 + * + * As this calculation is expensive and the threshold dB values may not exceed + * 0 to 96 we use pre-calculated values. + */ +static int avc_get_threshold(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + int db, i; + u16 reg = snd_soc_component_read(component, SGTL5000_DAP_AVC_THRESHOLD); + + /* register value 0 => -96dB */ + if (!reg) { + ucontrol->value.integer.value[0] = 96; + ucontrol->value.integer.value[1] = 96; + return 0; + } + + /* get dB from register value (rounded down) */ + for (i = 0; avc_thr_db2reg[i] > reg; i++) + ; + db = i; + + ucontrol->value.integer.value[0] = db; + ucontrol->value.integer.value[1] = db; + + return 0; +} + +/* + * custom function to put AVC threshold + * + * The register value is calculated by following formula: + * register_value = 10^(dB/20) * 0.636 * 2^15 + * As this calculation is expensive and the threshold dB values may not exceed + * 0 to 96 we use pre-calculated values. + */ +static int avc_put_threshold(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); + int db; + u16 reg; + + db = (int)ucontrol->value.integer.value[0]; + if (db < 0 || db > 96) + return -EINVAL; + reg = avc_thr_db2reg[db]; + snd_soc_component_write(component, SGTL5000_DAP_AVC_THRESHOLD, reg); + + return 0; +} + +static const DECLARE_TLV_DB_SCALE(capture_6db_attenuate, -600, 600, 0); + +/* tlv for mic gain, 0db 20db 30db 40db */ +static const DECLARE_TLV_DB_RANGE(mic_gain_tlv, + 0, 0, TLV_DB_SCALE_ITEM(0, 0, 0), + 1, 3, TLV_DB_SCALE_ITEM(2000, 1000, 0) +); + +/* tlv for DAP channels, 0% - 100% - 200% */ +static const DECLARE_TLV_DB_SCALE(dap_volume, 0, 1, 0); + +/* tlv for bass bands, -11.75db to 12.0db, step .25db */ +static const DECLARE_TLV_DB_SCALE(bass_band, -1175, 25, 0); + +/* tlv for hp volume, -51.5db to 12.0db, step .5db */ +static const DECLARE_TLV_DB_SCALE(headphone_volume, -5150, 50, 0); + +/* tlv for lineout volume, 31 steps of .5db each */ +static const DECLARE_TLV_DB_SCALE(lineout_volume, -1550, 50, 0); + +/* tlv for dap avc max gain, 0db, 6db, 12db */ +static const DECLARE_TLV_DB_SCALE(avc_max_gain, 0, 600, 0); + +/* tlv for dap avc threshold, */ +static const DECLARE_TLV_DB_MINMAX(avc_threshold, 0, 9600); + +static const struct snd_kcontrol_new sgtl5000_snd_controls[] = { + /* SOC_DOUBLE_S8_TLV with invert */ + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "PCM Playback Volume", + .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | + SNDRV_CTL_ELEM_ACCESS_READWRITE, + .info = dac_info_volsw, + .get = dac_get_volsw, + .put = dac_put_volsw, + }, + + SOC_DOUBLE("Capture Volume", SGTL5000_CHIP_ANA_ADC_CTRL, 0, 4, 0xf, 0), + SOC_SINGLE_TLV("Capture Attenuate Switch (-6dB)", + SGTL5000_CHIP_ANA_ADC_CTRL, + 8, 1, 0, capture_6db_attenuate), + SOC_SINGLE("Capture ZC Switch", SGTL5000_CHIP_ANA_CTRL, 1, 1, 0), + SOC_SINGLE("Capture Switch", SGTL5000_CHIP_ANA_CTRL, 0, 1, 1), + + SOC_DOUBLE_TLV("Headphone Playback Volume", + SGTL5000_CHIP_ANA_HP_CTRL, + 0, 8, + 0x7f, 1, + headphone_volume), + SOC_SINGLE("Headphone Playback Switch", SGTL5000_CHIP_ANA_CTRL, + 4, 1, 1), + SOC_SINGLE("Headphone Playback ZC Switch", SGTL5000_CHIP_ANA_CTRL, + 5, 1, 0), + + SOC_SINGLE_TLV("Mic Volume", SGTL5000_CHIP_MIC_CTRL, + 0, 3, 0, mic_gain_tlv), + + SOC_DOUBLE_TLV("Lineout Playback Volume", + SGTL5000_CHIP_LINE_OUT_VOL, + SGTL5000_LINE_OUT_VOL_LEFT_SHIFT, + SGTL5000_LINE_OUT_VOL_RIGHT_SHIFT, + 0x1f, 1, + lineout_volume), + SOC_SINGLE("Lineout Playback Switch", SGTL5000_CHIP_ANA_CTRL, 8, 1, 1), + + SOC_SINGLE_TLV("DAP Main channel", SGTL5000_DAP_MAIN_CHAN, + 0, 0xffff, 0, dap_volume), + + SOC_SINGLE_TLV("DAP Mix channel", SGTL5000_DAP_MIX_CHAN, + 0, 0xffff, 0, dap_volume), + /* Automatic Volume Control (DAP AVC) */ + SOC_SINGLE("AVC Switch", SGTL5000_DAP_AVC_CTRL, 0, 1, 0), + SOC_SINGLE("AVC Hard Limiter Switch", SGTL5000_DAP_AVC_CTRL, 5, 1, 0), + SOC_SINGLE_TLV("AVC Max Gain Volume", SGTL5000_DAP_AVC_CTRL, 12, 2, 0, + avc_max_gain), + SOC_SINGLE("AVC Integrator Response", SGTL5000_DAP_AVC_CTRL, 8, 3, 0), + SOC_SINGLE_EXT_TLV("AVC Threshold Volume", SGTL5000_DAP_AVC_THRESHOLD, + 0, 96, 0, avc_get_threshold, avc_put_threshold, + avc_threshold), + + SOC_SINGLE_TLV("BASS 0", SGTL5000_DAP_EQ_BASS_BAND0, + 0, 0x5F, 0, bass_band), + + SOC_SINGLE_TLV("BASS 1", SGTL5000_DAP_EQ_BASS_BAND1, + 0, 0x5F, 0, bass_band), + + SOC_SINGLE_TLV("BASS 2", SGTL5000_DAP_EQ_BASS_BAND2, + 0, 0x5F, 0, bass_band), + + SOC_SINGLE_TLV("BASS 3", SGTL5000_DAP_EQ_BASS_BAND3, + 0, 0x5F, 0, bass_band), + + SOC_SINGLE_TLV("BASS 4", SGTL5000_DAP_EQ_BASS_BAND4, + 0, 0x5F, 0, bass_band), +}; + +/* mute the codec used by alsa core */ +static int sgtl5000_mute_stream(struct snd_soc_dai *codec_dai, int mute, int direction) +{ + struct snd_soc_component *component = codec_dai->component; + u16 i2s_pwr = SGTL5000_I2S_IN_POWERUP; + + /* + * During 'digital mute' do not mute DAC + * because LINE_IN would be muted aswell. We want to mute + * only I2S block - this can be done by powering it off + */ + snd_soc_component_update_bits(component, SGTL5000_CHIP_DIG_POWER, + i2s_pwr, mute ? 0 : i2s_pwr); + + return 0; +} + +/* set codec format */ +static int sgtl5000_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) +{ + struct snd_soc_component *component = codec_dai->component; + struct sgtl5000_priv *sgtl5000 = snd_soc_component_get_drvdata(component); + u16 i2sctl = 0; + + sgtl5000->master = 0; + /* + * i2s clock and frame master setting. + * ONLY support: + * - clock and frame slave, + * - clock and frame master + */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + break; + case SND_SOC_DAIFMT_CBM_CFM: + i2sctl |= SGTL5000_I2S_MASTER; + sgtl5000->master = 1; + break; + default: + return -EINVAL; + } + + /* setting i2s data format */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_DSP_A: + i2sctl |= SGTL5000_I2S_MODE_PCM << SGTL5000_I2S_MODE_SHIFT; + break; + case SND_SOC_DAIFMT_DSP_B: + i2sctl |= SGTL5000_I2S_MODE_PCM << SGTL5000_I2S_MODE_SHIFT; + i2sctl |= SGTL5000_I2S_LRALIGN; + break; + case SND_SOC_DAIFMT_I2S: + i2sctl |= SGTL5000_I2S_MODE_I2S_LJ << SGTL5000_I2S_MODE_SHIFT; + break; + case SND_SOC_DAIFMT_RIGHT_J: + i2sctl |= SGTL5000_I2S_MODE_RJ << SGTL5000_I2S_MODE_SHIFT; + i2sctl |= SGTL5000_I2S_LRPOL; + break; + case SND_SOC_DAIFMT_LEFT_J: + i2sctl |= SGTL5000_I2S_MODE_I2S_LJ << SGTL5000_I2S_MODE_SHIFT; + i2sctl |= SGTL5000_I2S_LRALIGN; + break; + default: + return -EINVAL; + } + + sgtl5000->fmt = fmt & SND_SOC_DAIFMT_FORMAT_MASK; + + /* Clock inversion */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_NF: + i2sctl |= SGTL5000_I2S_SCLK_INV; + break; + default: + return -EINVAL; + } + + snd_soc_component_write(component, SGTL5000_CHIP_I2S_CTRL, i2sctl); + + return 0; +} + +/* set codec sysclk */ +static int sgtl5000_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_component *component = codec_dai->component; + struct sgtl5000_priv *sgtl5000 = snd_soc_component_get_drvdata(component); + + switch (clk_id) { + case SGTL5000_SYSCLK: + sgtl5000->sysclk = freq; + break; + default: + return -EINVAL; + } + + return 0; +} + +/* + * set clock according to i2s frame clock, + * sgtl5000 provides 2 clock sources: + * 1. sys_mclk: sample freq can only be configured to + * 1/256, 1/384, 1/512 of sys_mclk. + * 2. pll: can derive any audio clocks. + * + * clock setting rules: + * 1. in slave mode, only sys_mclk can be used + * 2. as constraint by sys_mclk, sample freq should be set to 32 kHz, 44.1 kHz + * and above. + * 3. usage of sys_mclk is preferred over pll to save power. + */ +static int sgtl5000_set_clock(struct snd_soc_component *component, int frame_rate) +{ + struct sgtl5000_priv *sgtl5000 = snd_soc_component_get_drvdata(component); + int clk_ctl = 0; + int sys_fs; /* sample freq */ + + /* + * sample freq should be divided by frame clock, + * if frame clock is lower than 44.1 kHz, sample freq should be set to + * 32 kHz or 44.1 kHz. + */ + switch (frame_rate) { + case 8000: + case 16000: + sys_fs = 32000; + break; + case 11025: + case 22050: + sys_fs = 44100; + break; + default: + sys_fs = frame_rate; + break; + } + + /* set divided factor of frame clock */ + switch (sys_fs / frame_rate) { + case 4: + clk_ctl |= SGTL5000_RATE_MODE_DIV_4 << SGTL5000_RATE_MODE_SHIFT; + break; + case 2: + clk_ctl |= SGTL5000_RATE_MODE_DIV_2 << SGTL5000_RATE_MODE_SHIFT; + break; + case 1: + clk_ctl |= SGTL5000_RATE_MODE_DIV_1 << SGTL5000_RATE_MODE_SHIFT; + break; + default: + return -EINVAL; + } + + /* set the sys_fs according to frame rate */ + switch (sys_fs) { + case 32000: + clk_ctl |= SGTL5000_SYS_FS_32k << SGTL5000_SYS_FS_SHIFT; + break; + case 44100: + clk_ctl |= SGTL5000_SYS_FS_44_1k << SGTL5000_SYS_FS_SHIFT; + break; + case 48000: + clk_ctl |= SGTL5000_SYS_FS_48k << SGTL5000_SYS_FS_SHIFT; + break; + case 96000: + clk_ctl |= SGTL5000_SYS_FS_96k << SGTL5000_SYS_FS_SHIFT; + break; + default: + dev_err(component->dev, "frame rate %d not supported\n", + frame_rate); + return -EINVAL; + } + + /* + * calculate the divider of mclk/sample_freq, + * factor of freq = 96 kHz can only be 256, since mclk is in the range + * of 8 MHz - 27 MHz + */ + switch (sgtl5000->sysclk / frame_rate) { + case 256: + clk_ctl |= SGTL5000_MCLK_FREQ_256FS << + SGTL5000_MCLK_FREQ_SHIFT; + break; + case 384: + clk_ctl |= SGTL5000_MCLK_FREQ_384FS << + SGTL5000_MCLK_FREQ_SHIFT; + break; + case 512: + clk_ctl |= SGTL5000_MCLK_FREQ_512FS << + SGTL5000_MCLK_FREQ_SHIFT; + break; + default: + /* if mclk does not satisfy the divider, use pll */ + if (sgtl5000->master) { + clk_ctl |= SGTL5000_MCLK_FREQ_PLL << + SGTL5000_MCLK_FREQ_SHIFT; + } else { + dev_err(component->dev, + "PLL not supported in slave mode\n"); + dev_err(component->dev, "%d ratio is not supported. " + "SYS_MCLK needs to be 256, 384 or 512 * fs\n", + sgtl5000->sysclk / frame_rate); + return -EINVAL; + } + } + + /* if using pll, please check manual 6.4.2 for detail */ + if ((clk_ctl & SGTL5000_MCLK_FREQ_MASK) == SGTL5000_MCLK_FREQ_PLL) { + u64 out, t; + int div2; + int pll_ctl; + unsigned int in, int_div, frac_div; + + if (sgtl5000->sysclk > 17000000) { + div2 = 1; + in = sgtl5000->sysclk / 2; + } else { + div2 = 0; + in = sgtl5000->sysclk; + } + if (sys_fs == 44100) + out = 180633600; + else + out = 196608000; + t = do_div(out, in); + int_div = out; + t *= 2048; + do_div(t, in); + frac_div = t; + pll_ctl = int_div << SGTL5000_PLL_INT_DIV_SHIFT | + frac_div << SGTL5000_PLL_FRAC_DIV_SHIFT; + + snd_soc_component_write(component, SGTL5000_CHIP_PLL_CTRL, pll_ctl); + if (div2) + snd_soc_component_update_bits(component, + SGTL5000_CHIP_CLK_TOP_CTRL, + SGTL5000_INPUT_FREQ_DIV2, + SGTL5000_INPUT_FREQ_DIV2); + else + snd_soc_component_update_bits(component, + SGTL5000_CHIP_CLK_TOP_CTRL, + SGTL5000_INPUT_FREQ_DIV2, + 0); + + /* power up pll */ + snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER, + SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP, + SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP); + + /* if using pll, clk_ctrl must be set after pll power up */ + snd_soc_component_write(component, SGTL5000_CHIP_CLK_CTRL, clk_ctl); + } else { + /* otherwise, clk_ctrl must be set before pll power down */ + snd_soc_component_write(component, SGTL5000_CHIP_CLK_CTRL, clk_ctl); + + /* power down pll */ + snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER, + SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP, + 0); + } + + return 0; +} + +/* + * Set PCM DAI bit size and sample rate. + * input: params_rate, params_fmt + */ +static int sgtl5000_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct sgtl5000_priv *sgtl5000 = snd_soc_component_get_drvdata(component); + int channels = params_channels(params); + int i2s_ctl = 0; + int stereo; + int ret; + + /* sysclk should already set */ + if (!sgtl5000->sysclk) { + dev_err(component->dev, "%s: set sysclk first!\n", __func__); + return -EFAULT; + } + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + stereo = SGTL5000_DAC_STEREO; + else + stereo = SGTL5000_ADC_STEREO; + + /* set mono to save power */ + snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER, stereo, + channels == 1 ? 0 : stereo); + + /* set codec clock base on lrclk */ + ret = sgtl5000_set_clock(component, params_rate(params)); + if (ret) + return ret; + + /* set i2s data format */ + switch (params_width(params)) { + case 16: + if (sgtl5000->fmt == SND_SOC_DAIFMT_RIGHT_J) + return -EINVAL; + i2s_ctl |= SGTL5000_I2S_DLEN_16 << SGTL5000_I2S_DLEN_SHIFT; + i2s_ctl |= SGTL5000_I2S_SCLKFREQ_32FS << + SGTL5000_I2S_SCLKFREQ_SHIFT; + break; + case 20: + i2s_ctl |= SGTL5000_I2S_DLEN_20 << SGTL5000_I2S_DLEN_SHIFT; + i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS << + SGTL5000_I2S_SCLKFREQ_SHIFT; + break; + case 24: + i2s_ctl |= SGTL5000_I2S_DLEN_24 << SGTL5000_I2S_DLEN_SHIFT; + i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS << + SGTL5000_I2S_SCLKFREQ_SHIFT; + break; + case 32: + if (sgtl5000->fmt == SND_SOC_DAIFMT_RIGHT_J) + return -EINVAL; + i2s_ctl |= SGTL5000_I2S_DLEN_32 << SGTL5000_I2S_DLEN_SHIFT; + i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS << + SGTL5000_I2S_SCLKFREQ_SHIFT; + break; + default: + return -EINVAL; + } + + snd_soc_component_update_bits(component, SGTL5000_CHIP_I2S_CTRL, + SGTL5000_I2S_DLEN_MASK | SGTL5000_I2S_SCLKFREQ_MASK, + i2s_ctl); + + return 0; +} + +/* + * set dac bias + * common state changes: + * startup: + * off --> standby --> prepare --> on + * standby --> prepare --> on + * + * stop: + * on --> prepare --> standby + */ +static int sgtl5000_set_bias_level(struct snd_soc_component *component, + enum snd_soc_bias_level level) +{ + struct sgtl5000_priv *sgtl = snd_soc_component_get_drvdata(component); + int ret; + + switch (level) { + case SND_SOC_BIAS_ON: + case SND_SOC_BIAS_PREPARE: + case SND_SOC_BIAS_STANDBY: + regcache_cache_only(sgtl->regmap, false); + ret = regcache_sync(sgtl->regmap); + if (ret) { + regcache_cache_only(sgtl->regmap, true); + return ret; + } + + snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER, + SGTL5000_REFTOP_POWERUP, + SGTL5000_REFTOP_POWERUP); + break; + case SND_SOC_BIAS_OFF: + regcache_cache_only(sgtl->regmap, true); + snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER, + SGTL5000_REFTOP_POWERUP, 0); + break; + } + + return 0; +} + +#define SGTL5000_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\ + SNDRV_PCM_FMTBIT_S20_3LE |\ + SNDRV_PCM_FMTBIT_S24_LE |\ + SNDRV_PCM_FMTBIT_S32_LE) + +static const struct snd_soc_dai_ops sgtl5000_ops = { + .hw_params = sgtl5000_pcm_hw_params, + .mute_stream = sgtl5000_mute_stream, + .set_fmt = sgtl5000_set_dai_fmt, + .set_sysclk = sgtl5000_set_dai_sysclk, + .no_capture_mute = 1, +}; + +static struct snd_soc_dai_driver sgtl5000_dai = { + .name = "sgtl5000", + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 2, + /* + * only support 8~48K + 96K, + * TODO modify hw_param to support more + */ + .rates = SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_96000, + .formats = SGTL5000_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_96000, + .formats = SGTL5000_FORMATS, + }, + .ops = &sgtl5000_ops, + .symmetric_rate = 1, +}; + +static bool sgtl5000_volatile(struct device *dev, unsigned int reg) +{ + switch (reg) { + case SGTL5000_CHIP_ID: + case SGTL5000_CHIP_ADCDAC_CTRL: + case SGTL5000_CHIP_ANA_STATUS: + return true; + } + + return false; +} + +static bool sgtl5000_readable(struct device *dev, unsigned int reg) +{ + switch (reg) { + case SGTL5000_CHIP_ID: + case SGTL5000_CHIP_DIG_POWER: + case SGTL5000_CHIP_CLK_CTRL: + case SGTL5000_CHIP_I2S_CTRL: + case SGTL5000_CHIP_SSS_CTRL: + case SGTL5000_CHIP_ADCDAC_CTRL: + case SGTL5000_CHIP_DAC_VOL: + case SGTL5000_CHIP_PAD_STRENGTH: + case SGTL5000_CHIP_ANA_ADC_CTRL: + case SGTL5000_CHIP_ANA_HP_CTRL: + case SGTL5000_CHIP_ANA_CTRL: + case SGTL5000_CHIP_LINREG_CTRL: + case SGTL5000_CHIP_REF_CTRL: + case SGTL5000_CHIP_MIC_CTRL: + case SGTL5000_CHIP_LINE_OUT_CTRL: + case SGTL5000_CHIP_LINE_OUT_VOL: + case SGTL5000_CHIP_ANA_POWER: + case SGTL5000_CHIP_PLL_CTRL: + case SGTL5000_CHIP_CLK_TOP_CTRL: + case SGTL5000_CHIP_ANA_STATUS: + case SGTL5000_CHIP_SHORT_CTRL: + case SGTL5000_CHIP_ANA_TEST2: + case SGTL5000_DAP_CTRL: + case SGTL5000_DAP_PEQ: + case SGTL5000_DAP_BASS_ENHANCE: + case SGTL5000_DAP_BASS_ENHANCE_CTRL: + case SGTL5000_DAP_AUDIO_EQ: + case SGTL5000_DAP_SURROUND: + case SGTL5000_DAP_FLT_COEF_ACCESS: + case SGTL5000_DAP_COEF_WR_B0_MSB: + case SGTL5000_DAP_COEF_WR_B0_LSB: + case SGTL5000_DAP_EQ_BASS_BAND0: + case SGTL5000_DAP_EQ_BASS_BAND1: + case SGTL5000_DAP_EQ_BASS_BAND2: + case SGTL5000_DAP_EQ_BASS_BAND3: + case SGTL5000_DAP_EQ_BASS_BAND4: + case SGTL5000_DAP_MAIN_CHAN: + case SGTL5000_DAP_MIX_CHAN: + case SGTL5000_DAP_AVC_CTRL: + case SGTL5000_DAP_AVC_THRESHOLD: + case SGTL5000_DAP_AVC_ATTACK: + case SGTL5000_DAP_AVC_DECAY: + case SGTL5000_DAP_COEF_WR_B1_MSB: + case SGTL5000_DAP_COEF_WR_B1_LSB: + case SGTL5000_DAP_COEF_WR_B2_MSB: + case SGTL5000_DAP_COEF_WR_B2_LSB: + case SGTL5000_DAP_COEF_WR_A1_MSB: + case SGTL5000_DAP_COEF_WR_A1_LSB: + case SGTL5000_DAP_COEF_WR_A2_MSB: + case SGTL5000_DAP_COEF_WR_A2_LSB: + return true; + + default: + return false; + } +} + +/* + * This precalculated table contains all (vag_val * 100 / lo_calcntrl) results + * to select an appropriate lo_vol_* in SGTL5000_CHIP_LINE_OUT_VOL + * The calculatation was done for all possible register values which + * is the array index and the following formula: 10^((idx−15)/40) * 100 + */ +static const u8 vol_quot_table[] = { + 42, 45, 47, 50, 53, 56, 60, 63, + 67, 71, 75, 79, 84, 89, 94, 100, + 106, 112, 119, 126, 133, 141, 150, 158, + 168, 178, 188, 200, 211, 224, 237, 251 +}; + +/* + * sgtl5000 has 3 internal power supplies: + * 1. VAG, normally set to vdda/2 + * 2. charge pump, set to different value + * according to voltage of vdda and vddio + * 3. line out VAG, normally set to vddio/2 + * + * and should be set according to: + * 1. vddd provided by external or not + * 2. vdda and vddio voltage value. > 3.1v or not + */ +static int sgtl5000_set_power_regs(struct snd_soc_component *component) +{ + int vddd; + int vdda; + int vddio; + u16 ana_pwr; + u16 lreg_ctrl; + int vag; + int lo_vag; + int vol_quot; + int lo_vol; + size_t i; + struct sgtl5000_priv *sgtl5000 = snd_soc_component_get_drvdata(component); + + vdda = regulator_get_voltage(sgtl5000->supplies[VDDA].consumer); + vddio = regulator_get_voltage(sgtl5000->supplies[VDDIO].consumer); + vddd = (sgtl5000->num_supplies > VDDD) + ? regulator_get_voltage(sgtl5000->supplies[VDDD].consumer) + : LDO_VOLTAGE; + + vdda = vdda / 1000; + vddio = vddio / 1000; + vddd = vddd / 1000; + + if (vdda <= 0 || vddio <= 0 || vddd < 0) { + dev_err(component->dev, "regulator voltage not set correctly\n"); + + return -EINVAL; + } + + /* according to datasheet, maximum voltage of supplies */ + if (vdda > 3600 || vddio > 3600 || vddd > 1980) { + dev_err(component->dev, + "exceed max voltage vdda %dmV vddio %dmV vddd %dmV\n", + vdda, vddio, vddd); + + return -EINVAL; + } + + /* reset value */ + ana_pwr = snd_soc_component_read(component, SGTL5000_CHIP_ANA_POWER); + ana_pwr |= SGTL5000_DAC_STEREO | + SGTL5000_ADC_STEREO | + SGTL5000_REFTOP_POWERUP; + lreg_ctrl = snd_soc_component_read(component, SGTL5000_CHIP_LINREG_CTRL); + + if (vddio < 3100 && vdda < 3100) { + /* enable internal oscillator used for charge pump */ + snd_soc_component_update_bits(component, SGTL5000_CHIP_CLK_TOP_CTRL, + SGTL5000_INT_OSC_EN, + SGTL5000_INT_OSC_EN); + /* Enable VDDC charge pump */ + ana_pwr |= SGTL5000_VDDC_CHRGPMP_POWERUP; + } else { + ana_pwr &= ~SGTL5000_VDDC_CHRGPMP_POWERUP; + /* + * if vddio == vdda the source of charge pump should be + * assigned manually to VDDIO + */ + if (regulator_is_equal(sgtl5000->supplies[VDDA].consumer, + sgtl5000->supplies[VDDIO].consumer)) { + lreg_ctrl |= SGTL5000_VDDC_ASSN_OVRD; + lreg_ctrl |= SGTL5000_VDDC_MAN_ASSN_VDDIO << + SGTL5000_VDDC_MAN_ASSN_SHIFT; + } + } + + snd_soc_component_write(component, SGTL5000_CHIP_LINREG_CTRL, lreg_ctrl); + + snd_soc_component_write(component, SGTL5000_CHIP_ANA_POWER, ana_pwr); + + /* + * set ADC/DAC VAG to vdda / 2, + * should stay in range (0.8v, 1.575v) + */ + vag = vdda / 2; + if (vag <= SGTL5000_ANA_GND_BASE) + vag = 0; + else if (vag >= SGTL5000_ANA_GND_BASE + SGTL5000_ANA_GND_STP * + (SGTL5000_ANA_GND_MASK >> SGTL5000_ANA_GND_SHIFT)) + vag = SGTL5000_ANA_GND_MASK >> SGTL5000_ANA_GND_SHIFT; + else + vag = (vag - SGTL5000_ANA_GND_BASE) / SGTL5000_ANA_GND_STP; + + snd_soc_component_update_bits(component, SGTL5000_CHIP_REF_CTRL, + SGTL5000_ANA_GND_MASK, vag << SGTL5000_ANA_GND_SHIFT); + + /* set line out VAG to vddio / 2, in range (0.8v, 1.675v) */ + lo_vag = vddio / 2; + if (lo_vag <= SGTL5000_LINE_OUT_GND_BASE) + lo_vag = 0; + else if (lo_vag >= SGTL5000_LINE_OUT_GND_BASE + + SGTL5000_LINE_OUT_GND_STP * SGTL5000_LINE_OUT_GND_MAX) + lo_vag = SGTL5000_LINE_OUT_GND_MAX; + else + lo_vag = (lo_vag - SGTL5000_LINE_OUT_GND_BASE) / + SGTL5000_LINE_OUT_GND_STP; + + snd_soc_component_update_bits(component, SGTL5000_CHIP_LINE_OUT_CTRL, + SGTL5000_LINE_OUT_CURRENT_MASK | + SGTL5000_LINE_OUT_GND_MASK, + lo_vag << SGTL5000_LINE_OUT_GND_SHIFT | + SGTL5000_LINE_OUT_CURRENT_360u << + SGTL5000_LINE_OUT_CURRENT_SHIFT); + + /* + * Set lineout output level in range (0..31) + * the same value is used for right and left channel + * + * Searching for a suitable index solving this formula: + * idx = 40 * log10(vag_val / lo_cagcntrl) + 15 + */ + vol_quot = lo_vag ? (vag * 100) / lo_vag : 0; + lo_vol = 0; + for (i = 0; i < ARRAY_SIZE(vol_quot_table); i++) { + if (vol_quot >= vol_quot_table[i]) + lo_vol = i; + else + break; + } + + snd_soc_component_update_bits(component, SGTL5000_CHIP_LINE_OUT_VOL, + SGTL5000_LINE_OUT_VOL_RIGHT_MASK | + SGTL5000_LINE_OUT_VOL_LEFT_MASK, + lo_vol << SGTL5000_LINE_OUT_VOL_RIGHT_SHIFT | + lo_vol << SGTL5000_LINE_OUT_VOL_LEFT_SHIFT); + + return 0; +} + +static int sgtl5000_enable_regulators(struct i2c_client *client) +{ + int ret; + int i; + int external_vddd = 0; + struct regulator *vddd; + struct sgtl5000_priv *sgtl5000 = i2c_get_clientdata(client); + + for (i = 0; i < ARRAY_SIZE(sgtl5000->supplies); i++) + sgtl5000->supplies[i].supply = supply_names[i]; + + vddd = regulator_get_optional(&client->dev, "VDDD"); + if (IS_ERR(vddd)) { + /* See if it's just not registered yet */ + if (PTR_ERR(vddd) == -EPROBE_DEFER) + return -EPROBE_DEFER; + } else { + external_vddd = 1; + regulator_put(vddd); + } + + sgtl5000->num_supplies = ARRAY_SIZE(sgtl5000->supplies) + - 1 + external_vddd; + ret = regulator_bulk_get(&client->dev, sgtl5000->num_supplies, + sgtl5000->supplies); + if (ret) + return ret; + + ret = regulator_bulk_enable(sgtl5000->num_supplies, + sgtl5000->supplies); + if (!ret) + usleep_range(10, 20); + else + regulator_bulk_free(sgtl5000->num_supplies, + sgtl5000->supplies); + + return ret; +} + +static int sgtl5000_probe(struct snd_soc_component *component) +{ + int ret; + u16 reg; + struct sgtl5000_priv *sgtl5000 = snd_soc_component_get_drvdata(component); + unsigned int zcd_mask = SGTL5000_HP_ZCD_EN | SGTL5000_ADC_ZCD_EN; + + /* power up sgtl5000 */ + ret = sgtl5000_set_power_regs(component); + if (ret) + goto err; + + /* enable small pop, introduce 400ms delay in turning off */ + snd_soc_component_update_bits(component, SGTL5000_CHIP_REF_CTRL, + SGTL5000_SMALL_POP, SGTL5000_SMALL_POP); + + /* disable short cut detector */ + snd_soc_component_write(component, SGTL5000_CHIP_SHORT_CTRL, 0); + + snd_soc_component_write(component, SGTL5000_CHIP_DIG_POWER, + SGTL5000_ADC_EN | SGTL5000_DAC_EN); + + /* enable dac volume ramp by default */ + snd_soc_component_write(component, SGTL5000_CHIP_ADCDAC_CTRL, + SGTL5000_DAC_VOL_RAMP_EN | + SGTL5000_DAC_MUTE_RIGHT | + SGTL5000_DAC_MUTE_LEFT); + + reg = ((sgtl5000->lrclk_strength) << SGTL5000_PAD_I2S_LRCLK_SHIFT | + (sgtl5000->sclk_strength) << SGTL5000_PAD_I2S_SCLK_SHIFT | + 0x1f); + snd_soc_component_write(component, SGTL5000_CHIP_PAD_STRENGTH, reg); + + snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_CTRL, + zcd_mask, zcd_mask); + + snd_soc_component_update_bits(component, SGTL5000_CHIP_MIC_CTRL, + SGTL5000_BIAS_R_MASK, + sgtl5000->micbias_resistor << SGTL5000_BIAS_R_SHIFT); + + snd_soc_component_update_bits(component, SGTL5000_CHIP_MIC_CTRL, + SGTL5000_BIAS_VOLT_MASK, + sgtl5000->micbias_voltage << SGTL5000_BIAS_VOLT_SHIFT); + /* + * enable DAP Graphic EQ + * TODO: + * Add control for changing between PEQ/Tone Control/GEQ + */ + snd_soc_component_write(component, SGTL5000_DAP_AUDIO_EQ, SGTL5000_DAP_SEL_GEQ); + + /* Unmute DAC after start */ + snd_soc_component_update_bits(component, SGTL5000_CHIP_ADCDAC_CTRL, + SGTL5000_DAC_MUTE_LEFT | SGTL5000_DAC_MUTE_RIGHT, 0); + + return 0; + +err: + return ret; +} + +static int sgtl5000_of_xlate_dai_id(struct snd_soc_component *component, + struct device_node *endpoint) +{ + /* return dai id 0, whatever the endpoint index */ + return 0; +} + +static const struct snd_soc_component_driver sgtl5000_driver = { + .probe = sgtl5000_probe, + .set_bias_level = sgtl5000_set_bias_level, + .controls = sgtl5000_snd_controls, + .num_controls = ARRAY_SIZE(sgtl5000_snd_controls), + .dapm_widgets = sgtl5000_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(sgtl5000_dapm_widgets), + .dapm_routes = sgtl5000_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(sgtl5000_dapm_routes), + .of_xlate_dai_id = sgtl5000_of_xlate_dai_id, + .suspend_bias_off = 1, + .idle_bias_on = 1, + .use_pmdown_time = 1, + .endianness = 1, +}; + +static const struct regmap_config sgtl5000_regmap = { + .reg_bits = 16, + .val_bits = 16, + .reg_stride = 2, + + .max_register = SGTL5000_MAX_REG_OFFSET, + .volatile_reg = sgtl5000_volatile, + .readable_reg = sgtl5000_readable, + + .cache_type = REGCACHE_RBTREE, + .reg_defaults = sgtl5000_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(sgtl5000_reg_defaults), +}; + +/* + * Write all the default values from sgtl5000_reg_defaults[] array into the + * sgtl5000 registers, to make sure we always start with the sane registers + * values as stated in the datasheet. + * + * Since sgtl5000 does not have a reset line, nor a reset command in software, + * we follow this approach to guarantee we always start from the default values + * and avoid problems like, not being able to probe after an audio playback + * followed by a system reset or a 'reboot' command in Linux + */ +static void sgtl5000_fill_defaults(struct i2c_client *client) +{ + struct sgtl5000_priv *sgtl5000 = i2c_get_clientdata(client); + int i, ret, val, index; + + for (i = 0; i < ARRAY_SIZE(sgtl5000_reg_defaults); i++) { + val = sgtl5000_reg_defaults[i].def; + index = sgtl5000_reg_defaults[i].reg; + ret = regmap_write(sgtl5000->regmap, index, val); + if (ret) + dev_err(&client->dev, + "%s: error %d setting reg 0x%02x to 0x%04x\n", + __func__, ret, index, val); + } +} + +static int sgtl5000_i2c_probe(struct i2c_client *client) +{ + struct sgtl5000_priv *sgtl5000; + int ret, reg, rev; + struct device_node *np = client->dev.of_node; + u32 value; + u16 ana_pwr; + + sgtl5000 = devm_kzalloc(&client->dev, sizeof(*sgtl5000), GFP_KERNEL); + if (!sgtl5000) + return -ENOMEM; + + i2c_set_clientdata(client, sgtl5000); + + ret = sgtl5000_enable_regulators(client); + if (ret) + return ret; + + sgtl5000->regmap = devm_regmap_init_i2c(client, &sgtl5000_regmap); + if (IS_ERR(sgtl5000->regmap)) { + ret = PTR_ERR(sgtl5000->regmap); + dev_err(&client->dev, "Failed to allocate regmap: %d\n", ret); + goto disable_regs; + } + + sgtl5000->mclk = devm_clk_get(&client->dev, NULL); + if (IS_ERR(sgtl5000->mclk)) { + ret = PTR_ERR(sgtl5000->mclk); + /* Defer the probe to see if the clk will be provided later */ + if (ret == -ENOENT) + ret = -EPROBE_DEFER; + + dev_err_probe(&client->dev, ret, "Failed to get mclock\n"); + + goto disable_regs; + } + + ret = clk_prepare_enable(sgtl5000->mclk); + if (ret) { + dev_err(&client->dev, "Error enabling clock %d\n", ret); + goto disable_regs; + } + + /* Need 8 clocks before I2C accesses */ + udelay(1); + + /* read chip information */ + ret = regmap_read(sgtl5000->regmap, SGTL5000_CHIP_ID, ®); + if (ret) { + dev_err(&client->dev, "Error reading chip id %d\n", ret); + goto disable_clk; + } + + if (((reg & SGTL5000_PARTID_MASK) >> SGTL5000_PARTID_SHIFT) != + SGTL5000_PARTID_PART_ID) { + dev_err(&client->dev, + "Device with ID register %x is not a sgtl5000\n", reg); + ret = -ENODEV; + goto disable_clk; + } + + rev = (reg & SGTL5000_REVID_MASK) >> SGTL5000_REVID_SHIFT; + dev_info(&client->dev, "sgtl5000 revision 0x%x\n", rev); + sgtl5000->revision = rev; + + /* reconfigure the clocks in case we're using the PLL */ + ret = regmap_write(sgtl5000->regmap, + SGTL5000_CHIP_CLK_CTRL, + SGTL5000_CHIP_CLK_CTRL_DEFAULT); + if (ret) + dev_err(&client->dev, + "Error %d initializing CHIP_CLK_CTRL\n", ret); + + /* Mute everything to avoid pop from the following power-up */ + ret = regmap_write(sgtl5000->regmap, SGTL5000_CHIP_ANA_CTRL, + SGTL5000_CHIP_ANA_CTRL_DEFAULT); + if (ret) { + dev_err(&client->dev, + "Error %d muting outputs via CHIP_ANA_CTRL\n", ret); + goto disable_clk; + } + + /* + * If VAG is powered-on (e.g. from previous boot), it would be disabled + * by the write to ANA_POWER in later steps of the probe code. This + * may create a loud pop even with all outputs muted. The proper way + * to circumvent this is disabling the bit first and waiting the proper + * cool-down time. + */ + ret = regmap_read(sgtl5000->regmap, SGTL5000_CHIP_ANA_POWER, &value); + if (ret) { + dev_err(&client->dev, "Failed to read ANA_POWER: %d\n", ret); + goto disable_clk; + } + if (value & SGTL5000_VAG_POWERUP) { + ret = regmap_update_bits(sgtl5000->regmap, + SGTL5000_CHIP_ANA_POWER, + SGTL5000_VAG_POWERUP, + 0); + if (ret) { + dev_err(&client->dev, "Error %d disabling VAG\n", ret); + goto disable_clk; + } + + msleep(SGTL5000_VAG_POWERDOWN_DELAY); + } + + /* Follow section 2.2.1.1 of AN3663 */ + ana_pwr = SGTL5000_ANA_POWER_DEFAULT; + if (sgtl5000->num_supplies <= VDDD) { + /* internal VDDD at 1.2V */ + ret = regmap_update_bits(sgtl5000->regmap, + SGTL5000_CHIP_LINREG_CTRL, + SGTL5000_LINREG_VDDD_MASK, + LINREG_VDDD); + if (ret) + dev_err(&client->dev, + "Error %d setting LINREG_VDDD\n", ret); + + ana_pwr |= SGTL5000_LINEREG_D_POWERUP; + dev_info(&client->dev, + "Using internal LDO instead of VDDD: check ER1 erratum\n"); + } else { + /* using external LDO for VDDD + * Clear startup powerup and simple powerup + * bits to save power + */ + ana_pwr &= ~(SGTL5000_STARTUP_POWERUP + | SGTL5000_LINREG_SIMPLE_POWERUP); + dev_dbg(&client->dev, "Using external VDDD\n"); + } + ret = regmap_write(sgtl5000->regmap, SGTL5000_CHIP_ANA_POWER, ana_pwr); + if (ret) + dev_err(&client->dev, + "Error %d setting CHIP_ANA_POWER to %04x\n", + ret, ana_pwr); + + if (np) { + if (!of_property_read_u32(np, + "micbias-resistor-k-ohms", &value)) { + switch (value) { + case SGTL5000_MICBIAS_OFF: + sgtl5000->micbias_resistor = 0; + break; + case SGTL5000_MICBIAS_2K: + sgtl5000->micbias_resistor = 1; + break; + case SGTL5000_MICBIAS_4K: + sgtl5000->micbias_resistor = 2; + break; + case SGTL5000_MICBIAS_8K: + sgtl5000->micbias_resistor = 3; + break; + default: + sgtl5000->micbias_resistor = 2; + dev_err(&client->dev, + "Unsuitable MicBias resistor\n"); + } + } else { + /* default is 4Kohms */ + sgtl5000->micbias_resistor = 2; + } + if (!of_property_read_u32(np, + "micbias-voltage-m-volts", &value)) { + /* 1250mV => 0 */ + /* steps of 250mV */ + if ((value >= 1250) && (value <= 3000)) + sgtl5000->micbias_voltage = (value / 250) - 5; + else { + sgtl5000->micbias_voltage = 0; + dev_err(&client->dev, + "Unsuitable MicBias voltage\n"); + } + } else { + sgtl5000->micbias_voltage = 0; + } + } + + sgtl5000->lrclk_strength = I2S_LRCLK_STRENGTH_LOW; + if (!of_property_read_u32(np, "lrclk-strength", &value)) { + if (value > I2S_LRCLK_STRENGTH_HIGH) + value = I2S_LRCLK_STRENGTH_LOW; + sgtl5000->lrclk_strength = value; + } + + sgtl5000->sclk_strength = I2S_SCLK_STRENGTH_LOW; + if (!of_property_read_u32(np, "sclk-strength", &value)) { + if (value > I2S_SCLK_STRENGTH_HIGH) + value = I2S_SCLK_STRENGTH_LOW; + sgtl5000->sclk_strength = value; + } + + /* Ensure sgtl5000 will start with sane register values */ + sgtl5000_fill_defaults(client); + + ret = devm_snd_soc_register_component(&client->dev, + &sgtl5000_driver, &sgtl5000_dai, 1); + if (ret) + goto disable_clk; + + return 0; + +disable_clk: + clk_disable_unprepare(sgtl5000->mclk); + +disable_regs: + regulator_bulk_disable(sgtl5000->num_supplies, sgtl5000->supplies); + regulator_bulk_free(sgtl5000->num_supplies, sgtl5000->supplies); + + return ret; +} + +static void sgtl5000_i2c_remove(struct i2c_client *client) +{ + struct sgtl5000_priv *sgtl5000 = i2c_get_clientdata(client); + + regmap_write(sgtl5000->regmap, SGTL5000_CHIP_CLK_CTRL, SGTL5000_CHIP_CLK_CTRL_DEFAULT); + regmap_write(sgtl5000->regmap, SGTL5000_CHIP_DIG_POWER, SGTL5000_DIG_POWER_DEFAULT); + regmap_write(sgtl5000->regmap, SGTL5000_CHIP_ANA_POWER, SGTL5000_ANA_POWER_DEFAULT); + + clk_disable_unprepare(sgtl5000->mclk); + regulator_bulk_disable(sgtl5000->num_supplies, sgtl5000->supplies); + regulator_bulk_free(sgtl5000->num_supplies, sgtl5000->supplies); +} + +static void sgtl5000_i2c_shutdown(struct i2c_client *client) +{ + sgtl5000_i2c_remove(client); +} + +static const struct i2c_device_id sgtl5000_id[] = { + {"sgtl5000", 0}, + {}, +}; + +MODULE_DEVICE_TABLE(i2c, sgtl5000_id); + +static const struct of_device_id sgtl5000_dt_ids[] = { + { .compatible = "fsl,sgtl5000", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, sgtl5000_dt_ids); + +static struct i2c_driver sgtl5000_i2c_driver = { + .driver = { + .name = "sgtl5000", + .of_match_table = sgtl5000_dt_ids, + }, + .probe = sgtl5000_i2c_probe, + .remove = sgtl5000_i2c_remove, + .shutdown = sgtl5000_i2c_shutdown, + .id_table = sgtl5000_id, +}; + +module_i2c_driver(sgtl5000_i2c_driver); + +MODULE_DESCRIPTION("Freescale SGTL5000 ALSA SoC Codec Driver"); +MODULE_AUTHOR("Zeng Zhaoming <zengzm.kernel@gmail.com>"); +MODULE_LICENSE("GPL"); |